English
User Manual
ET2410/ ET2210 Series
English
E6665
First Edition V1
May 2011
Copyright © 2011 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except
documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK
COMPUTER, INC. (“ASUS”).
Products and corporate names mentioned in this manual may or may not be registered trademarks or copyrights
of their respective companies, and are used for identification purposes only. All trademarks are the property of their
respective owners.
Every effort has been made to ensure that the contents of this manual are correct and up to date. However, the
manufacturer makes no guarantee regarding the accuracy of its contents, and reserves the right to make changes
without prior notice.
Contents..................................................................................................... 3
Notices...................................................................................................................................................... 5
Federal Communications Commission Statement.......................................................... 5
Canadian Department of Communications Statement................................................. 6
IC Radiation Exposure Statement for Canada................................................................... 6
Declaration of Conformity (R&TTE directive 1999/5/EC)............................................... 6
CE Mark Warning.......................................................................................................................... 7
Wireless Operation Channel for Different Domains........................................................ 7
France Restricted Wireless Frequency Bands..................................................................... 8
REACH.............................................................................................................................................. 9
Global Environmental Regulation Compliance and Declaration ............................10
ASUS Recycling/Takeback Services.....................................................................................10
UL Safety Precaution.................................................................................................................10
ENERGY STAR complied product..........................................................................................11
Notes for this manual........................................................................................................................11
Safety information..............................................................................................................................12
Setting up your system............................................................................................................12
Care during use..........................................................................................................................12
Sound Pressure Warning.........................................................................................................13
TV Tuner (on selected models)..............................................................................................13
Adapter..........................................................................................................................................13
DC Fan Warning..........................................................................................................................13
Welcome................................................................................................... 14
Package contents...............................................................................................................................14
Getting to know your All-in-one PC....................................................... 15
Front view..............................................................................................................................................15
Rear view...............................................................................................................................................17
Side views..............................................................................................................................................19
Using the touch screen.....................................................................................................................21
Showing the touch pointer....................................................................................................21
Cleaning the touch screen......................................................................................................22
English
Contents
Positioning your All-in-one PC............................................................... 23
English
Placing on the desktop.....................................................................................................................23
Mounting to the wall.........................................................................................................................24
Setting up your All-in-one PC................................................................. 26
Connecting the wired keyboard and mouse............................................................................26
Connecting the wireless keyboard and mouse.......................................................................26
Powering on the system..................................................................................................................27
Powering off.........................................................................................................................................27
Configuring a wireless connection..............................................................................................28
Configuring a wired connection...................................................................................................29
Using a static IP...........................................................................................................................29
Using a dynamic IP (PPPoE)....................................................................................................31
Connecting to external audio devices........................................................................................34
Configuring audio output settings..............................................................................................34
Recovering your system.......................................................................... 36
Using the hidden partition..............................................................................................................36
Recovering the OS to the Factory Default Partition (F9 Recovery)..........................36
Backing up the Factory Default Environment Data
to a USB Drive (F9 Backup).....................................................................................................36
Using the USB storage device (USB Restore)............................................................................37
English
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance
with manufacturer’s instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes or modifications not expressly approved by the grantee of this device
could void the user’s authority to operate the equipment.
RF exposure warning
This equipment must be installed and operated in accordance with provided instructions and
the antenna(s) used for this transmitter must be installed to provide a separation distance
of at least 20 cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter. End-users and installers must be provide with antenna
installation instructions and transmitter operating conditions for satisfying RF exposure
compliance.
All-in-one PC ET2410/ ET2210 Series
Canadian Department of Communications Statement
English
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus set out in the Radio Interference Regulations of the Canadian Department of
Communications.
This class B digital apparatus complies with Canadian ICES-003.
IC Radiation Exposure Statement for Canada
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment. To maintain compliance with IC RF exposure compliance requirements, please
avoid direct contact to the transmitting antenna during transmitting. End users must follow
the specific operating instructions for satisfying RF exposure compliance.
Operation is subject to the following two conditions:
• This device may not cause interference and
• This device must accept any interference, including interference that may cause undesired
operation of the device.
Declaration of Conformity (R&TTE directive 1999/5/EC)
The following items were completed and are considered relevant and sufficient:
•
•
•
•
•
•
•
Essential requirements as in [Article 3]
Protection requirements for health and safety as in [Article 3.1a]
Testing for electric safety according to [EN 60950]
Protection requirements for electromagnetic compatibility in [Article 3.1b]
Testing for electromagnetic compatibility in [EN 301 489-1] & [EN 301 489-17]
Effective use of the radio spectrum as in [Article 3.2]
Radio test suites according to [EN 300 328-2]
All-in-one PC ET2410/ ET2210 Series
CE Mark Warning
English
This is a Class B product, in a domestic environment, this product may cause radio interference,
in which case the user may be required to take adequate measures.
CE marking for devices without wireless LAN/Bluetooth
The shipped version of this device complies with the requirements of the EEC directives
2004/108/EC “Electromagnetic compatibility” and 2006/95/EC “Low voltage directive”.
CE marking for devices with wireless LAN/ Bluetooth
This equipment complies with the requirements of Directive 1999/5/EC of the European
Parliament and Commission from 9 March, 1999 governing Radio and Telecommunications
Equipment and mutual recognition of conformity.
Wireless Operation Channel for Different Domains
N. America
2.412-2.462 GHz
Ch01 through CH11
Japan
2.412-2.484 GHz
Ch01 through Ch14
Europe ETSI
2.412-2.472 GHz
Ch01 through Ch13
All-in-one PC ET2410/ ET2210 Series
France Restricted Wireless Frequency Bands
English
Some areas of France have a restricted frequency band. The worst case maximum authorized
power indoors are:
•
•
10mW for the entire 2.4 GHz band (2400 MHz–2483.5 MHz)
100mW for frequencies between 2446.5 MHz and 2483.5 MHz
Channels 10 through 13 inclusive operate in the band 2446.6 MHz to 2483.5 MHz.
There are few possibilities for outdoor use: On private property or on the private property
of public persons, use is subject to a preliminary authorization procedure by the Ministry of
Defense, with maximum authorized power of 100mW in the 2446.5–2483.5 MHz band. Use
outdoors on public property is not permitted.
In the departments listed below, for the entire 2.4 GHz band:
•
•
Maximum authorized power indoors is 100mW
Maximum authorized power outdoors is 10mW
Departments in which the use of the 2400–2483.5 MHz band is permitted with an EIRP of less
than 100mW indoors and less than 10mW outdoors:
01
08
24
37
58
64
70
84
90
Ain 02 Aisne
03 Allier
Ardennes
09 Ariège
11 Aude
Dordogne
25 Doubs
26 Drôme
Indre et Loire 41 Loir et Cher 45 Loiret
Nièvre
59 Nord
60 Oise
Pyrénées Atlantique
66 Pyrénées Orientales
Haute Saône
71 Saône et Loire
Vaucluse
88 Vosges
Territoire de Belfort
94 Val de Marne
05
12
32
50
61
67
75
89
Hautes Alpes
Aveyron
16
Gers
36
Manche
55
Orne
63
Bas Rhin
68
Paris
82
Yonne
Charente
Indre
Meuse
Puy du Dôme
Haut Rhin
Tarn et Garonne
This requirement is likely to change over time, allowing you to use your wireless LAN card in
more areas within France. Please check with ART for the latest information (www.art-telecom.
fr)
Your WLAN Card transmits less than 100mW, but more than 10mW.
All-in-one PC ET2410/ ET2210 Series
English
NO DISASSEMBLY
The warranty does not apply to the products that
have been disassembled by users
Lithium-Ion Battery Warning
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace
only with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
No Exposure to Liquids
DO NOT expose to or use near liquids, rain, or moisture. This product is not
waterproof or oil-proof.
This symbol of the crossed out wheeled bin indicates that the product (electrical, electronic
equipment, and mercury-containing button cell battery) should not be placed in municipal
waste. Check local regulations for disposal of electronic products.
DO NOT throw the battery in municipal waste. The symbol of the crossed out wheeled bin
indicates that the battery should not be placed in municipal waste.
REACH
Complying with the REACH (Registration, Evaluation, Authorization, and Restriction of
Chemicals) regulatory framework, we publish the chemical substances in our products at ASUS
REACH website at http://csr.asus.com/english/REACH.htm.
All-in-one PC ET2410/ ET2210 Series
Global Environmental Regulation Compliance and Declaration
English
ASUS follows the green design concept to design and manufacture our products, and makes
sure that each stage of the product life cycle of ASUS product is in line with global environmental
regulations. In addition, ASUS disclose the relevant information based on regulation
requirements.
Please refer to http://csr.asus.com/english/Compliance.htm for information disclosure based
on regulation requirements ASUS is complied with:
Japan JIS-C-0950 Material Declarations
EU REACH SVHC
Korea RoHS
Swiss Energy Laws
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards
for protecting our environment. We believe in providing solutions for you to be able to
responsibly recycle our products, batteries, other components as well as the packaging
materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling
information in different regions.
UL Safety Precaution
To meet safety requirements, the All-in-one PC must be mounted to a bracket which
guarantees the necessary stability considering the weight of the All-in-one PC. The All-in-one
PC shall only be mounted and used with UL listed mounting adapters and brackets (e.g. VESA).
10
All-in-one PC ET2410/ ET2210 Series
ENERGY STAR complied product
English
ENERGY STAR is a joint program of the U.S. Environmental Protection Agency
and the U.S. Department of Energy helping us all save money and protect the
environment through energy efficient products and practices.
All ASUS products with the ENERGY STAR logo comply with the ENERGY STAR
standard, and the power management feature is enabled by default. The
monitor and computer are automatically set to sleep after 15 and 30 minutes
of user inactivity. To wake your computer, click the mouse or press any key on the keyboard.
Please visit http://www.energy.gov/powermanagement for detail information on power
management and its benefits to the environment. In addition, please visit http://www.
energystar.gov for detail information on the ENERGY STAR joint program.
ENERGY STAR is NOT supported on Freedos and Linux-based products.
Notes for this manual
To ensure that you perform certain tasks properly, take note of the following symbols used
throughout this manual.
WARNING: Vital information that you MUST follow to prevent injury to yourself.
IMPORTANT: Instructions that you MUST follow to complete a task.
TIP: Tips and useful information that help you complete a task.
NOTE: Additional information for special situations.
All illustrations and screenshots in this manual are for reference only. Actual product
specifications and software screen images may vary with territories. Visit the ASUS
website at www.asus.com for the latest information.
All-in-one PC ET2410/ ET2210 Series
11
Safety information
English
Your All-in-one PC ET2410/ ET2210 Series is designed and tested to meet the latest standards
of safety for information technology equipment. However, to ensure your safety, it is important
that you read the following safety instructions.
Setting up your system
•
•
•
•
Read and follow all instructions in the documentation before you operate your system.
Do not use this product near water or a heated source such as a radiator.
Set up the system on a stable surface.
Openings on the chassis are for ventilation. Do not block or cover these openings. Ensure
that you leave plenty of space around the system for ventilation. Never insert objects of any
kind into the ventilation openings.
• Use this product in environments with ambient temperatures between 0˚C and 40˚C.
• If you use an extension cord, ensure that the total ampere rating of the devices plugged
into the extension cord does not exceed its ampere rating.
Care during use
• Do not walk on the power cord or allow anything to rest on it.
• Do not spill water or any other liquids on your system.
• When the system is turned off, a small amount of electrical current still flows. Always unplug
all power, modem, and network cables from the power outlets before cleaning the system.
• The touch screen requires periodic cleaning to achieve the best touch sensitivity. Keep the
screen clean from foreign objects or excessive dust accumulation. To clean the screen:
•
Turn off the system and disconnect the power cord from the wall.
•
Spray a small amount of a household glass cleaner onto the supplied cleaning cloth
and gently wipe the screen surface.
•
Do not spray the cleaner directly on the screen.
•
Do not use an abrasive cleaner or a coarse cloth when cleaning the screen.
• If you encounter the following technical problems with the product, unplug the power cord
and contact a qualified service technician or your retailer.
•
The power cord or plug is damaged.
•
Liquid has been spilled into the system.
•
The system does not function properly even if you follow the operating instructions.
•
The system was dropped or the cabinet is damaged.
•
The system performance changes.
12
All-in-one PC ET2410/ ET2210 Series
Sound Pressure Warning
English
Excessive sound pressure from earphones or headphones can cause hearing damage or loss.
Adjustment of the volume control as well as the equalizer to settings other than the center
position may increase the earphones or headphones output voltage and the sound pressure
level.
TV Tuner (on selected models)
Note to CATV System Installer—This reminder is provided to call the CATV systems installer’s
attention to Section 820-93 of the National Electric Code, which provides guidelines for
proper grounding and, in particular, specify that the Coaxial cable shield be connected to the
grounding system of the building as close to the point of cable entry as practical.
Adapter
1. Adapter information (varies with models)
a. Input voltage: 100–240Vac
Input frequency: 50–60Hz
Rating output current: 150W (19.5V, 7.7A)
Rating output voltage: 19Vdc
b. Input voltage: 100–240Vac
Input frequency: 50–60Hz
Rating output current: 135W (19V, 7.1A)
Rating output voltage: 19Vdc
c. Input voltage: 100–240Vac
Input frequency: 50–60Hz
Rating output current: 120W (19V, 6.32A)
Rating output voltage: 19Vdc
2. The socket outlet must be near to the unit and easily accessible.
DC Fan Warning
Please note that the DC fan is a moving part that may cause DANGER. Ensure to keep your
body from the moving fan blades.
All-in-one PC ET2410/ ET2210 Series
13
Welcome
English
Congratulations on your purchase of All-in-one PC ET2410/ ET2210 Series. The following
illustrations display the package contents of your new product. If any of the following items is
damaged or missing, contact your retailer.
Package contents
All-in-one PC ET2410/ ET2210 Series
Keyboard (wired or wireless)
Mouse (wired or wireless)
Quic
k Gu
id
AC adapter
Remote Control (optional)
14
All-in-one PC ET2410/ ET2210 Series
e
Power cord
Quick Start Guide
Warranty Card
KBM USB receiver dongle (optional)
Subwoofer (optional)
Note:
The keyboard, mouse, power supply,
remote control, and KBM USB receiver
dongle illustrations are for reference
only. Actual product specifications
may vary with territories.
English
Getting to know your All-in-one PC
Front view
Refer to the following diagram to identify the components on this side of the system.
1
2
3
4
5
11
10 9 8 7
6
All-in-one PC ET2410/ ET2210 Series
15
1
English
Webcam
The built-in webcam with the built-in digital microphone allows you to start video
chats online.
2
Webcam LED
Indicates that the built-in webcam is enabled.
3
Digital Microphone (Built-in)
The built-in digital microphone can be used for video conferencing, voice narrations,
audio recordings, and multimedia applications.
4
LCD display (Touch-enabled function on selected models)
The LCD display features optimal resolution. Touch-enabled models bring digital life
to your fingertips.
5
Hard Disk Drive LED
Indicates hard disk drive activity.
6
The power switch allows you to switch the system ON/OFF.
7
Volume Increase Button
Press this button to increase the volume.
8
MENU Button
Press to display the menu. Press this button to enter/select the highlighted icon
(function) while the OSD is activated.
9
Volume decrease Button
Press this button to decrease the volume.
10 MODE Button
Press to switch the display signal source. When switched to HDMI-in and VGA-in,
the All-in-one PC can be used as a standard desktop LCD monitor.
11 16
Power switch
Audio Speaker`
The built-in stereo speaker system allows you to hear audio without additional
attachments. The multimedia sound system features an integrated digital audio
controller that produces rich, vibrant sound. (Results improve with external stereo
headphones or speakers.) Audio features are software controlled.
All-in-one PC ET2410/ ET2210 Series
Rear view
1 2 3
1
4
5
6
7
8
English
Refer to the following diagram to identify the components on this side of the system.
9
Kensington® Lock port
The Kensington® lock port allows the computer to be secured using Kensington®
compatible security products. These security products usually include a metal cable
and lock that prevent the computer to be removed from a fixed object.
All-in-one PC ET2410/ ET2210 Series
17
2
English
Power input (DC 19V/ 19.5V)
The supplied power adapter converts AC power to DC power for use with this jack.
Power supplied through this jack supplies power to the PC. To prevent damage to the
PC, always use the supplied power adapter.
The power adapter may become warm or hot when in use. Do not cover the adapter and keep it
away from your body.
3
4
Antenna Input (on selected models)
The antenna input is for TV frequency signal and allows for use with the digital TV
antenna or input from subscription television services. The antenna can receive digital
TV. Cable service connection can receive digital TV, analog TV, depending on paid
services.
Cable Holder
Gather all the cables with this cable holder.
5
USB 2.0 port
The Universal Serial Bus (USB) port is compatible with USB devices such as keyboards, mouse devices, cameras, and hard disk drives.
6
LAN port
The eight-pin RJ-45 LAN port supports a standard Ethernet cable for connection to a
local network.
7
8
9
18
HDMI Input Port
HDMI (High-Definition Multimedia Interface) is an uncompressed all-digital audio/
video interface between any audio/video source, such as set-top box or DVD player.
HDMI Output Port
Please connect this port with devices equipped with HDMI input port, such as LCD
monitor or projector.
Display (Monitor) Input (on selected models)
The display input port supports a standard VGA cable and helps turn your All-in-one
PC into a larger display for your Notebook PC or other devices.
All-in-one PC ET2410/ ET2210 Series
Side views
English
Refer to the following diagrams to identify the components on both sides of the system.
1
USB 3.0/ 2.0 port (vary by model)
The Universal Serial Bus (USB) port is compatible with
USB devices such as keyboards, mouse devices,
cameras, and hard disk drives.
2
E-SATA + USB 2.0 Combo
This port connects to an external Serial-ATA hard disk drive.
1
2
3
4
5
6
DO NOT insert a different connector to the external SATA
port.
3
Memory card reader
This All-in-one PC has a built-in memory card
reader that supports SD cards used in devices like
digital cameras, MP3 players, mobile phones, and
PDAs.
4
Headphone jack
The stereo headphone jack (3.5mm) is used to connect
the system’s audio out signal to headphones. Using
this jack automatically disables the built-in speakers.
5
Microphone jack
The microphone jack is designed to connect to a
microphone used for video conferencing, voice
narrations, or simple audio recordings.
7
8
All-in-one PC ET2410/ ET2210 Series
19
6
English
Subwoofer jack (on selected models)
The proprietary subwoofer jack is used to connect to the ASUS All-in-one PC subwoofer. The subwoofer allows you to enjoy vibrant bass (low frequency) sounds in your multimedia applications.
The subwoofer jack can ONLY be connected to All-in-one PC subwoofers or sound devices by
ASUS. DO NOT connect other devices to this jack. Doing so may damage the device.
7
Optical Drive Electronic Eject
The optical drive eject has an electronic eject button for opening the tray. You can also eject the optical drive tray through any software player or by right clicking the optical drive in Windows “Computer” and selecting Eject.
8
Optical Drive
The built-in optical drive may support compact discs (CD) and/or digital video discs (DVD), and may have recordable (R) or re-writable (RW) capabilities. See the marketing specifications for details on each model.
20
All-in-one PC ET2410/ ET2210 Series
Using the touch screen
English
All-in-one PC brings digital life to your fingertips. With a few touches, you can make All-in-one
PC work at your command. Your touch functions like a mouse device:
• Touch = left-click on the mouse
• Touch and hold = right-click on the mouse
The touch-enabled screen is available on selected models.
Showing the touch pointer
The touch pointer, or virtual mouse, helps you use the touch-enabled screen more
conveniently. To show the touch pointer
1. From the Windows® desktop, click Start
> Control Panel > View Devices and
Printer.
All-in-one PC ET2410/ ET2210 Series
21
2. Click Change touch input settings.
English
3. Click the Touch tab on the top and click
the box before Show the touch pointer
when I’m interacting with items
on the screen. Click OK to finish the
configuration.
4. You will see a virtual mouse on the screen
when you touch the screen.
Cleaning the touch screen
The touch screen requires periodic cleaning to achieve the best touch sensitivity. Keep the
screen clean from foreign objects or excessive dust accumulation. To clean the screen:
• Turn off the system and disconnect the power cord from the wall.
• Spray a small amount of a household glass cleaner onto the supplied cleaning cloth and
gently wipe the screen surface.
• Do not spray the cleaner directly on the screen.
• Do not use an abrasive cleaner or a coarse cloth when cleaning the screen.
22
All-in-one PC ET2410/ ET2210 Series
English
Positioning your All-in-one PC
Placing on the desktop
Place your All-in-one PC on a flat surface such as a table or desk by ���������������������
setting the stand on
the platform. Tilt the display panel to an angle between 5 degrees forward to 20 degrees
backwards from an upright position for visual comfort.
Avoid tilting hazards and potential breakage by tilting the display panel within the given range.
20O
-5O
All-in-one PC ET2410/ ET2210 Series
23
Mounting to the wall
English
To mount your All-in-one PC to the wall, purchase an optional wall mount adapter and a wall
mount kit (VESA100 with pad and bracket). Install the wall mount components according to
the following instructions.
1
1. To release the stand, place the All-in-one PC
face-down first, resting the display panel on
a flat even surface. Lift the stand upwards.
Take off the back hatch by pressing and
lifting the clips.
2. Moving the stand again, press it
downwards. You can set the All-in-one PC
near the edge of the flat surface to ensure
that the stand goes all the way down.
Remove the four screws on the stand and
save for future reinstallation. Take out the
stand and put it aside.
2
1
2
3
2
3. Align the wall mount adapter to the holes
at the back of the All-in-one PC and secure
it with the four screws (M4 x 7L) provided.
24
All-in-one PC ET2410/ ET2210 Series
1
2
English
4. Secure the wall mount pad to the adapter
with the four screws (M3 x 8L) that came
with the kit, noting the correct orientation.
5. By following the instructions in the
installation manual that came with your
wall mount kit (VESA100), fasten the wall
mount bracket to the wall using the four
screws (M4 x 10L) provided in the kit.
Upright your All-in-one PC and hook it on
to the wall by sliding the grooves of the
wall mount pad into the bracket .
The wall mount kit in this illustration is for
reference only.
1. For machine ventilation, be sure to leave a distance of at least 6cm between the All-in-one
PC and the wall.
2. The wall mount kit should comply with VESA standards.
3. To ensure safety, please read the wall mount kit installation manual carefully before
mounting your All-in-one PC to the wall.
4. At least two persons are required to install or remove the All-in-one PC onto and from the
wall to avoid hazard of falling objects and breakage. Qualified personnel is recommended.
5. The wall should be able to sustain four times the weight of the All-in-on PC and wall mount
components combined (40kg at least). The mounting location must be able to withstand
earthquake or other impacts. Cement or masonry walls recommended.
All-in-one PC ET2410/ ET2210 Series
25
Setting up your All-in-one PC
English
Connecting the wired keyboard and mouse
Connect the keyboard 1 and the mouse 2 to the USB port on the rear panel. Y������������
ou may also
connect the keyboard and mouse to the USB port on the left side of the panel if the keyboard
cable is not long enough��.
1
2
Connecting the wireless keyboard and mouse
1. Install batteries to the wireless keyboard and
mouse.
2. Plug the wireless dongle for keyboard and mouse
to a USB port.
3. Push the buttons at the back of both the
keyboard and mouse to connect with the All-inone PC.
4. You can begin using the wireless keyboard and
mouse.
1. Simply reconnect if the wireless keyboard and mouse lose connection. Avoid other nearby
WiFi devices at least 20 cm as they may interfere with the connection.
2. The illustrations above are for reference only. Actual appearances and specifications (wired
or wireless) of the keyboard and mouse may vary by territory.
26
All-in-one PC ET2410/ ET2210 Series
Powering on the system
1
2
3
) and then press
English
Connect the supplied AC adapter to the DC IN jack on the rear panel (
the Power switch on the right ( 4 ) to turn on the system.
2
3
1
4
WARNING! DO NOT connect the AC power
cord to an AC outlet prior to connecting
the DC plug to the system. Doing so may
damage the AC-DC adapter.
Powering off
• To put the system into suspend mode, press the Power switch on the right. To bring the
system back to the OS, press the Power switch again, click the mouse, touch the display or
press any key on the keyboard.
• To shut down the system completely, follow the normal Windows shutdown process.
All-in-one PC ET2410/ ET2210 Series
27
Configuring a wireless connection
English
1. Click the wireless network icon with an orange star
in the Windows® Notification area.
2. Select the wireless access point you
want to connect to from the list and click
Connect to build the connection.
If you cannot find the desired access point,
click the Refresh icon on the upper
right corner to refresh and search in the
list again.
Enter the network security key when
connecting to a security-enabled network.
3. After a connection has been established, the connection is shown on the list.
4. You can see the wireless network icon
28
All-in-one PC ET2410/ ET2210 Series
in the Notification area.
English
Configuring a wired connection
Using a static IP
1. Click the network icon with a yellow
warning triangle
in the
Windows® Notification area and select
Open Network and Sharing Center.
Ensure that you have connected the LAN
cable to the All-in-one PC.
2. Click Change adapter settings in the left
panel.
3. Right-click Local Area Connection and
select Properties.
All-in-one PC ET2410/ ET2210 Series
29
English
4. Click Internet Protocol Version 4(TCP/
IPv4) and click Properties.
5. Select Use the following IP address.
6. Enter your IP address, Subnet mask, and
Default gateway.
7. If needed, enter the Preferred DNS
server address.
8. After entering all the related values, click
OK to finish the configuration.
30
All-in-one PC ET2410/ ET2210 Series
Using a dynamic IP (PPPoE)
English
1. Repeat steps 1–4 in the previous section.
2 Select Obtain an IP address
automatically and click OK.
(Continue the following steps if using PPPoE)
3. Return to the Network and Sharing
Center and then click Set up a new
connection or network.
4. Select Connect to the Internet and click
Next.
All-in-one PC ET2410/ ET2210 Series
31
English
5. Select Broadband (PPPoE) and click
Next.
6. Enter User name, Password, and
Connection name. Click Connect.
7. Click Close to finish the configuration.
32
All-in-one PC ET2410/ ET2210 Series
English
8. Click the network icon in the notification
area and click the connection you just
created.
9. Enter your user name and password. Click
Connect to connect to the Internet.
All-in-one PC ET2410/ ET2210 Series
33
Connecting to external audio devices
English
In addition to built-in stereo speakers (2-channel, left-right speakers), All-in-one PC allows you
to use external audio devices. Refer to the table below for the audio jacks on the left panel and
their functions.
Audio jack
Description
Audio Out; Connects to headphones.
Mic In; Connects to microphone
Connects to ASUS All-in-one PC subwoofer (optional)
The subwoofer jack can ONLY be connected to All-in-one PC subwoofers or sound devices by
ASUS. DO NOT connect other devices to this jack. Doing so may damage the device.
Configuring audio output settings
After connecting a speaker system to your All-in-one PC, follow the steps below to configure
the speaker settings:
1. Right-click the speaker icon in the
Windows® notification area and click
Sounds.
34
All-in-one PC ET2410/ ET2210 Series
3. Do the advanced configurations, such as
adjusting the speaker level and output
rate. Click OK to finish the configurations.
All-in-one PC ET2410/ ET2210 Series
English
2. Select a playback device and click
Properties to configure the settings.
35
Recovering your system
English
Using the hidden partition
The recovery partition includes an image of the operating system, drivers, and utilities installed
on your system at the factory. The recovery partition provides a comprehensive recovery
solution that quickly restores your system’s software to its original working state, provided that
your hard disk drive is in good working order. Before using the recovery partition, copy your
data files (such as Outlook PST files) to a USB device or to a network drive and make note of
any customized configuration settings (such as network settings).
Recovering the OS to the Factory Default Partition (F9 Recovery)
1.
2.
3.
4.
5.
6.
7.
Disable Boot Booster in BIOS setup.
Press [F9] during bootup.
Select Windows setup [EMS Enabled] when this item appears and press [Enter].
Select the language and click Next.
Select Recover the OS to the Default Partition and click Next.
The factory default partition will be displayed. Click Next.
Data on the default partition will be cleared. Click Recover to start the system recovery.
You will lose all your data on the selected partition. Ensure to back up your important data
beforehand.
8. When the recovery is completed successfully, click Reboot to restart the system.
Backing up the Factory Default Environment Data to a USB Drive (F9
Backup)
1. Repeat the step 1—4 in the previous section.
2. Select Backup the Factory Environment to a USB Drive and click Next.
3. Connect a USB storage device to your PC to start the Factory Default Environment backup.
The required size of the connected USB storage device should be larger than 5GB. The actual
size may vary with your PC model.
4. Select a desired USB storage device if more than one USB storage device is connected to
your All-in-one PC and click Next.
If there is already a partition with proper size in the selected USB storage device (for example,
a partition that has been used as the backup partition), the system will show this partition
automatically and reuse it for backup.
36
All-in-one PC ET2410/ ET2210 Series
English
5. Based on the different situations in the previous step, data on the selected USB storage
device or on the selected partition will be cleared. Click Backup to start backup.
You will lose all your data on the selected USB storage device or on the selected partition.
Ensure to back up your important data beforehand.
6. When backing up the factory default environment is completed successfully, click Reboot
to restart the system.
Using the USB storage device (USB Restore)
When the Recovery Partition in your system is crashed, use the USB storage device to restore
the system to the factory default partition or the factory environment data to the entire hard
disk.
1. Disable Boot Booster in BIOS setup.
2. Connect the USB storage device that you back up the factory environment data to.
3. Press <ESC> on bootup and the Please select boot device screen appears. Select USB:
XXXXXX to boot from the connected USB storage device.
4. Select the language and click Next.
5. Select Restore and click Next.
6. Select a task and click Next. Task options:
• Restore the OS to the Default Partition only
Select this option if you simply want to restore the OS to the factory default partition. This
option deletes all data on the system partition “C” and keeps the partition “D” unchanged.
After you click Next, the factory default partition will be displayed. Click Next again.
• Restore the Whole Hard Disk
Select this option if you want to restore your All-in-one PC to the factory default state. This
option deletes all data from your hard disk and creates a new system partition as drive “C” ,
an empty partition as drive “D“ and a Recovery Partition.
7. Data on the factory default partition or on the whole hard disk will be cleared depending
on the option you selected in the previous step. Click Restore to start the task.
8. When the restore is completed successfully, click Reboot to restart the system.
All-in-one PC ET2410/ ET2210 Series
37
English
38
Manufacturer
ASUSTek COMPUTER INC.
Address, City
No. 150, LI-TE RD., PEITOU, TAIPEI 112, TAIWAN R.O.C
Country
TAIWAN
Authorized Representative in Europe
ASUS COMPUTER GmbH
Address, City
HARKORT STR. 21-23, 40880 RATINGEN
Country
GERMANY
All-in-one PC ET2410/ ET2210 Series