advertisement
▼
Scroll to page 2
of 16
Lombok / ZAF_en / A31008-M2401-W101-1-7619 / Lombok.fm / 13.03.2012 1 Gigaset A120/A120A/A220 Please note New messages in the calls list/answering machine list/network mailbox list (¢ page 7) are indicated in the display by the message New messages. Version 4, 16.09.2005 The handset at a glance 1 Charge status of the batteries: = e V U (flat to full) = flashes: batteries almost flat e V U flashes: charging 2 Answering machine icon (A120A only) 3 Display keys 4 End call key and On/Off key 5 Talk key/Handsfree key (handsfree mode A220only) 6 Control key (u) 7 Directory key (press down on the control key) 8 Key 1 Open the answering machine (A120A)/ network mailbox 9 Star key Ringers on/off (press and hold); with an open connection: switch from pulse dialling to tone dialling (press briefly) 10 Key 0/recall key Consultation call (flash): press and hold 11 Hash key Keypad lock on/off (press and hold); toggles between upper/lower case and digits; inserts a dialling pause (press and hold) 12 Microphone A120/A120A A220 Display keys: Pressing a key launches the function that appears above that key in the display. The base station at a glance Display Function when pressed INT 1 2 3 4 5 6 7 8 9 10 11 12 1 ± V 11.12. 11:56 INT MENU MENU “ Call other registered handsets ¢ page 11. Open main/submenu (see menu overview ¢ page 16). Go back one menu level. U Scroll up/down or adjust volume with u. ˜ Backspace deletes one character at a time. T OK Move cursor to left/right with u. Confirm menu function or save entry. Registration/paging key: Search for handsets (press briefly, "Paging" ¢ page 10) Register handsets (press and hold ¢ page 10). ECO DECT During a call, the level of the handset's radio signal adjusts automatically according to the distance between the handset and base station: the shorter the distance, the lower the signal strength (radiation). The handset’s radio signal is switched off when it is in standby mode. The base station, however, maintains contact with the handset with fewer radio signals. In addition, the base station radio signals are switched off when the No Radiation setting is enabled. MENU ¤ u Settings ¤ OK ¤ u Base ¤ OK ¤ u ECO DECT ¤ OK ¤ No Radiation ¤ OK (‰= radiation switched off, icon ½ in the left-hand corner of the display) Please note ◆ All registered handsets must support this feature. ◆ For quick connection of incoming calls the handset repeatedly switches to reception mode for short periods. This increases energy consumption and therefore reduces the standby and talk times. Lombok / ZAF_en / A31008-M2401-W101-1-7619 / Lombok.fm / 13.03.2012 2 Safety precautions ◆ The device cannot be used in the event of a power failure. It is also not possible to transmit emergency calls. Read the safety precautions and the user guide before use. Explain their content and the potential hazards associated with using the telephone to your children. Use only the power adapter supplied, as indicated on the devices. Use only rechargeable batteries that correspond to the specification (see „Technical Data“). Never use a conventional (non-rechargeable) battery or other battery types as this could result in significant health risks and personal injury. Rechargeable batteries, which are noticeably damaged, must be replaced. Using your telephone may affect nearby medical equipment. Be aware of the technical conditions in your particular environment, e.g., doctor's surgery. If you use a medical device (e.g., a pacemaker), please contact the device manufacturer. They will be able to advise you regarding the susceptibility of the device to external sources of high frequency energy (for the specifications of your Gigaset product see „Technical Data“). Do not hold the rear of the handset to your ear when it is ringing or when speaker mode is activated. Otherwise you risk serious and permanent damage to your hearing. Your Gigaset is compatible with the majority of digital hearing aids on the market. However, perfect function with all hearing aids cannot be guaranteed. The phone may cause interference in analogue hearing aids (humming or whistling) or cause them to overload. If you require assistance, please contact the hearing aid supplier. The base and charger are not splashproof. For this reason do not install them in a damp environment such as bathrooms or shower rooms. Version 4, 16.09.2005 Do not use your phone/phone system in environments with a potential explosion hazard (e.g., paint shops). If you give your Gigaset to a third party, make sure you also give them the user guide. Remove faulty devices from use or have them repaired by our Service team, as these could interfere with other wireless services. ◆ Emergency numbers cannot be dialled if the keypad lock is activated! First steps Check the pack contents One Gigaset A120/A120A/A220 base station, one mains adapter, one Gigaset handset, one phone cord, two batteries, one battery cover, one user guide. If you have purchased a model with multiple handsets, the package should contain two batteries, a battery cover and a charging cradle with mains adapter for each additional handset. Setting up the base station and charging cradle (if included) ◆ Set up the base station at a central location on a flat, non-slip surface in your house ◆ ◆ ◆ ◆ ◆ ◆ or apartment. You can also mount the base station and charging cradle on the wall. Pay attention to the range of the base station. This is up to 300 m in unobstructed outdoor areas and up to 50 m inside buildings. The base station and charging cradle are designed for use in enclosed dry rooms in a temperature range of +5 °C to +45 °C. Care: Wipe down the base station and handset with a damp cloth (no solvents) or an antistatic cloth. Never use a dry cloth. This can cause static. The phone's feet do not usually leave any marks on surfaces. However, due to the multitude of different varnishes and polishes used on today's furnishings, the risk of marks on the surfaces cannot be completely ruled out. Never expose the telephone to the influence of heat sources, direct sunlight or other electrical devices. Protect your Gigaset from moisture, dust, corrosive liquids and vapours. Lombok / ZAF_en / A31008-M2401-W101-1-7619 / Lombok.fm / 13.03.2012 3 Connecting the base station ¤ First connect the mains adapter 1. ¤ Then connect the telephone jack 2 and insert the cables Setting up the handset for use The display is protected by a plastic film. Please remove the protective film! 1 1 Inserting the batteries and closing the battery cover 2 1 into the cable ducts. Please note: ◆ The mains adapter must always be connected, as the phone will not operate without mains connection. ◆ Use only the mains adapter and phone cord supplied. Pin connections on telephone cables can vary. ◆ The answering machine (A120A only) is ready for use approx. 30 seconds after the base has been connected. Connecting the charging cradle (if included) 2 1 ¤ Connect the flat plug to the power supply 1. ¤ Plug the mains adapter into the plug socket 2. Version 4, 16.09.2005 If you need to disconnect the plug from the charging cradle, press the release button 3 and disconnect the plug 4. Warning Use only the rechargeable batteries recommended by Gigaset Communications GmbH (¢ page 13), i.e. never use conventional (non-rechargeable) batteries as this could result in significant health risks and personal injury. For example, the batteries could explode. The phone could also malfunction or be damaged as a result of using batteries that are not of the recommended type. ¤ Insert the batteries with the polarity in the correct direction. The polarity is indicated in the battery compartment. ¤ First insert the battery cover at the top a. ¤ Then press the cover b until it clicks into place. ¤ To reopen the battery cover, grip into the cavity on the casing, then pull the battery cover in an upward direction. a 4 3 b Lombok / ZAF_en / A31008-M2401-W101-1-7619 / Lombok.fm / 13.03.2012 4 Initial charging and discharging of the batteries Setting the date and time The correct charge status can only be displayed if the batteries are first fully charged and discharged. Set the date and time so that the correct date and time can be assigned to incoming calls, and so that the alarm can be used. MENU ¤ u Settings ¤ OK ¤ Date/Time ¤ OK ¤ Date ¤ ~ (enter the day, month and year in 6-digit format) ¤ OK ¤ Time ¤ ~ (enter hours and minutes in 4-digit format) ¤ OK (display message: Saved) ¤ a (press and hold to return to idle status) When entering the time and date, you can move the position of an entry to the left or right by pressing the control key u up or down. Please note If your phone receives the date and time during calling line display (e.g., via your network provider, a router or PABXs), you can specify whether this data should be copied to your phone: ¤ Press the key sequence: MENU ¤ P#Q5#MI The following is displayed; 973 SET: [0] the current setting flashes: ¤ Press one of the following keys to specify, when this data should be copied to your phone: Q Never or 1 Once, in case the date/time is not set on your phone or 2 Always Your selection is displayed (e.g. 2): 973 SET: [2] ¤ Press the display key OK. ¤ Charge the handset in the base for 6.5 hours. 6.5 h Please note The handset must only be placed in the designated Gigaset base or charging cradle. ¤ After charging, remove the handset from the base and only replace it when the batteries are fully discharged. Please note ◆ The handset is pre-registered with the base. If you have purchased a ◆ ◆ Version 4, 16.09.2005 ◆ ◆ ◆ model with multiple handsets, all handsets will already be registered with the base. You do not need to register the handset again. The internal handset number appears in the top left of the display, e.g. 1 (¢ page 1). However, if a handset is not registered with the base (Register HS or Put into base is displayed), please register the handset manually (¢ page 10). If you have purchased multiple devices, you can upgrade your Gigaset to a cordless PABX by registering all A120/A220 handsets at the same base (¢ page 10). After the first battery charge and discharge, you may place your handset in the charger after every call. Always repeat the charging and discharging procedure if you remove the batteries from the handset and reinsert them. The batteries may warm up during charging. This is not dangerous. After a while, the charge capacity of the batteries will decrease for technical reasons. Issued by Gigaset Communications GmbH Frankenstr. 2a 46395 Bocholt Germany © Gigaset Communications GmbH 2012 All rights reserved. Subject to availability. Rights of modification reserved. www.gigaset.com This user guide is made from 100 % recycled paper. Lombok / ZAF_en / A31008-M2401-W101-1-7619 / Lombok.fm / 13.03.2012 5 Activating/deactivating the handset Press and hold the a key to activate or deactivate the handset. If you place a deactivated handset in the base station or charging cradle, it will automatically activate after approx. 30 seconds. If you remove the handset from the base station/charging cradle, the display turns off briefly. Making calls Making external calls and ending calls External calls are calls using the public telephone network. ~ (Enter the phone number) ¤ b. The phone number is dialled. (Or you can first press and hold talk key b [dial tone] and then enter the number.) During the call you can adjust the earpiece volume using t and set the volume with u. End the call/cancel dialling: Press the end call key a. You can automatically insert a network provider dialling code before any phone number (¢ page 6). Accepting a call Press the talk key b to accept the call. When Auto Answer is activated (see menu overview ¢ page 16), simply remove the handset from the base station/charging cradle. Calling Line Identification When you get a call, the caller's number will be displayed on your handset; the caller's name will be displayed if it is stored in the directory. Prerequisites: 1 You have asked your network provider for the caller's number (CLIP) to be displayed on your handset screen. 2 The caller has asked the network provider for his/her number to be identified (CLI). External call appears in the display if you have not requested CLIP, Withheld appears if the caller has withheld CLI, and Unavailable appears if CLI has not been requested. Version 4, 16.09.2005 Handsfree operation (Gigaset A220 only) In handsfree mode, you activate the loudspeaker so that you can hear the caller without having to hold the handset to your ear. During a call activate or deactivate handsfree mode by pressing the handsfree key d. For instructions on adjusting the handsfree mode volume see menu overview ¢ page 16. Lombok / ZAF_en / A31008-M2401-W101-1-7619 / Lombok.fm / 13.03.2012 6 Using the directory and lists Automatic network provider preselection You can store a call-by-call number (preselection number), which is automatically placed in front of numbers when you dial them. If, for example, you wish to make international calls via special network providers, you can save the relevant dialling code here. In the "With Preselect" list, specify the dialling codes or the first digits of the dialling codes that you wish to assign to the preselection number. In the "Without Presel" list, enter any exceptions to the "With Preselect" list. Example: Presel. Number 0999 With Preselect 08 Without Presel 081 084 All numbers that start with 08, except for 081 and 084, are dialled with the preselection number 0999. Phone number Dialled number 07112345 ¤ 07112345 08912345 ¤ 0999 08912345 08412345 ¤ 08412345 Enter preselection number via menu (¢ page 16). Permanently deactivating preselection: Delete the preselection number with ˜. Temporarily cancelling preselection: b (press and hold) ¤ MENU ¤ q Preselect off ¤ OK ¤ ~ (enter number) or s (use number from directory) ¤ The number is dialled without Preselection. Directory To open the directory: press control key s. You can save up to 50 (A120/A120A) or 80 (A220) phone numbers (max. 22 digits) with corresponding names (max. 14 characters). Enter letters/characters ¢ page 13. Storing the first number in the directory s ¤ New Entry? ¤ OK ¤ ~ (enter number) ¤ OK ¤ ~ (enter name) ¤ OK Storing further numbers in the directory s ¤ MENU ¤ New Entry ¤ OK ¤ ~ (enter number) ¤ OK ¤ ~ (enter name) ¤ OK Selecting a directory entry Open the directory with s. You have the following options: ◆ Use u to scroll through the entries until the required name is selected. ◆ Enter the first character of the name and scroll to the entry with u, if required. Dialling with the directory s ¤ u (select entry) ¤ b Using other functions s ¤ u (select entry) ¤ MENU The following functions can be selected with u: New Entry/Show Number/Edit Entry/Use Number/Delete Entry/Send Entry/Delete List/Send List/Shortcut Version 4, 16.09.2005 Sending the directory to another handset Prerequisites: ◆ The sending and receiving handsets must both be registered to the same base station. ◆ The other handset and the base station can send and receive directory entries. s ¤ u (select entry) ¤ MENU ¤ u Send Entry/Send List ¤ OK ¤ ~ (enter the internal number of the receiving handset) ¤ OK Using shortcut keys You can assign directory entries to the keys 2–9: s ¤ u (select entry) ¤ MENU ¤ u Shortcut ¤ OK ¤ u (select key) ¤ OK or ~ (press the key you want to assign the entry to) To dial, press and hold the required shortcut key. Lombok / ZAF_en / A31008-M2401-W101-1-7619 / Lombok.fm / 13.03.2012 7 Last number redial list This list contains the ten last dialled numbers. Dialling from the last number redial list b (press briefly) ¤ u (select entry) ¤ b Managing entries in the last number redial list b (press briefly) ¤ u (select entry) ¤ MENU The following functions can be selected with u: Use Number/Copy to Dir./Delete Entry/Delete List Calls list/answering machine list/network mailbox list Press MENU ¤ Messages ¤ OK, to open the list overview. If you have new messages, only lists with new messages are displayed. Scroll through the lists by pressing u. An advisory tone sounds as soon as a new entry appears in the calls list/answering machine list/network mailbox list. New messages appears in the display. Please note If calls are saved in the network mailbox, you will receive a message if the appropriate settings have been made (depending on your network provider). Calls list Prerequisites: CLIP (¢ page 5) Depending on the type of list set, the calls list contains (¢ page 16) answered calls, missed calls and calls recorded from the answering machine (A120A only). Depending on the type of list set, all numbers of the last 25 incoming calls are saved or just the missed calls are saved. Version 4, 16.09.2005 Open the calls list MENU ¤ Messages ¤ OK ¤ u CallsList The calls list is displayed as follows: Number of new entries + number of old, read entries CallsList 01+02 Press OK to open the list. The last incoming call is displayed. If necessary, use u to select another entry. Using other functions u (select entry) ¤ MENU The following functions can be selected with u: Delete Entry/Copy to Dir./Date/ Time/Status/Delete List Calling back a caller from the calls list MENU ¤ Messages ¤ CallsList 01+02 ¤ OK ¤ u (select entry) ¤ b Answering machine list (A120A only)/network mailbox list You can use these lists to listen to messages on the answering machine (see "Playing back/deleting messages" ¢ page 8) or network mailbox (¢ page 10). Lombok / ZAF_en / A31008-M2401-W101-1-7619 / Lombok.fm / 13.03.2012 8 Operating the answering machine (A120A only) The answering machine is operated from the handset. You can record your own announcement messages using the handset. The pre-recorded announcement is used if no personal announcement is available. If the memory is full, Memory full! appears in the display and the answering machine switches itself off automatically. It activates again automatically when you delete old messages. The answering machine has already been preset at the factory. Make individual settings using the handset. How to set a delay time (time period after which you would like the answering machine to answer a call), as well as how to set the recording length and activate call screening during the recording, see menu overview ¢ page 16. Activating/deactivating the answering machine MENU ¤ u Answer Machine ¤ OK ¤ u Answer Mach. ¤ OK (‰ = on) When you switch on the answering machine, the ± icon appears in the display. Recording your own announcement MENU ¤ u Answer Machine ¤ OK ¤ u Announcements ¤ OK ¤ Rec announce ¤ OK ¤ Speak after OK ¤ OK You hear the ready tone (short tone). Now say your announcement (at least 3 sec.). Press OK to confirm or press a or ” to reject your recording. After recording, the announcement is played back for you to check. Please note: Recording ends automatically when the max. recording time of 170 seconds is reached or if there is a break in speaking of more than 2 seconds. Playing back or deleting announcements See menu overview ¢ page 16. Version 4, 16.09.2005 Playing back/deleting messages There are three ways to start playing back messages on the answering machine. ◆ Start message playback via the Answer Machine menu: MENU ¤ u Answer Machine ¤ OK ¤ u Play Messages ¤ OK If you have entered a number for the network mailbox you still need to select the answering machine: ¤ u Answer Mach. ¤ OK ◆ Start message playback via the answering machine list: MENU ¤ Messages ¤ OK ¤ u Ans.Mach. Ans.Mach. 01+02 The list is displayed as follows: Number of new messages + number of old, played back messages Press OK to open the list. ◆ Fast access to the answering machine: To access the answering machine, simply press and hold the 1 key. The integrated answering machine has already been preset at the factory. However, if you have set the network mailbox for fast access, you can change this setting (¢ page 16). If you have new messages, playback will start with the first new message, otherwise with the first old message. Messages consist of ◆ the message header (number/date/time) and ◆ the message body (recorded text). The header is played back first, then the body. The phone number or the name is displayed. Stopping and controlling playback Controlling playback depends on the point in time at which the corresponding key is pressed. During message playback: 2 t or 1 s or I L Pause playback. Press 2 again to resume. During playback of message header: Go to the start of the previous message. Skipping back from the first message jumps to the last message. During playback of message body: Go to the start of the current message. Go to the start of the next message. Skipping forward from the last message jumps to the first message. During playback of message header: Skip header. During playback of message body: Go to the body of the next message. Skipping forward from the last message jumps to the first message. Lombok / ZAF_en / A31008-M2401-W101-1-7619 / Lombok.fm / 13.03.2012 9 Additional functions during message playback Press the display key MENU. Playback stops. Select the relevant function using u: Dial Number/Continue/Handset Volume/ Copy to Dir./Delete all old Deleting an individual message During playback: Press key Q or the display key ˜. Deleting all old messages During playback or pause: MENU ¤ u Delete all old ¤ OK (Confirm the security prompt) Accepting a call from the answering machine You can accept a call while the answering machine is recording the caller's message: MENU ¤ Accept ¤ OK You can also accept the call by: ◆ pressing the talk key b ◆ removing the handset from the base/charger (if Auto Answer is activated ¢ page 16) Recording stops and you can speak to the caller. Setting a different language Version 4, 16.09.2005 You can change the language for the voice prompt and default announcement. MENU ¤ u Answer Machine ¤ OK ¤ u Language ¤ OK ¤ u (select language) ¤ OK Operating when on the move (remote operation) You can check your answering machine from any other telephone (hotel, pay phone etc.). Prerequisites: ◆ You have set a system PIN other than 0000 ¢ page 16. ◆ The phone you are using for remote operation has tone dialling (DTMF) i. e., you hear different tones when you press the keys. Calling the answering machine and playing messages ~ (Dial your own number.) ¤ When you hear your announcement, press 9 and enter the system PIN. The following keys are used for operation: A B 3 0 During the number/date/time announcement: Skip to the start of the previous message. During the message playback: Skip to the start of the current message. Stop playback. Press again to resume. Go to the next message. Delete current message. Activating the answering machine ~ (Enter your own number and allow the phone to ring until you hear the message: "Please enter PIN") ¤ ~ (Enter system PIN) Your answering machine is activated. It tells you how much memory time is left. The messages are now played back. The answering machine cannot be deactivated remotely. Lombok / ZAF_en / A31008-M2401-W101-1-7619 / Lombok.fm / 13.03.2012 10 Network mailbox The network mailbox is the answering machine in your provider's telephone network. More information is available from your provider. You cannot use the network mailbox unless you have requested it from your provider. In order to use the network mailbox quickly and easily via the network mailbox list (¢ page 7), the menu (¢ page 16) and to use fast access via key 1 (¢ page 1), you will need to enter the number in your phone: MENU ¤ u Answer Machine ¤ OK ¤ u Netw. Mailbox/Net Mailbox ¤ ~ (enter number) ¤ OK Locating a handset ("Paging") Version 4, 16.09.2005 You can locate your handset using the base. ¤ Briefly press the registration/paging key on the base (¢ page 1). All handsets will ring at the same time (“paging”), even if the ringers are switched off. Ending paging: Briefly press the registration/paging key on the base (¢ page 1) or press the talk key b or the end call key a on the handset. Registering handsets manually You can register up to four handsets on your base station. Each additional handset must be registered on the base station in order for it to work properly! 1) On the handset MENU ¤ u Settings ¤ OK ¤ u Handset ¤ OK ¤ u Register HS ¤ Enter the base system PIN (default setting: 0000) ¤ OK ¤ Registering is displayed. 2) On the base Within 60 seconds, press and hold the registration/paging key on the base (¢ page 1) for approx. 3 seconds. Registration takes approx. 1 minute. Handsets are assigned the lowest available internal number (1-4). If the internal numbers 1–4 are already assigned to other devices, the number 4 will be overwritten. De-registering handsets You can de-register all other registered handsets from each of the registered Gigaset handsets. MENU ¤ u Settings ¤ OK ¤ u Handset ¤ OK ¤ u De-register HS ¤ u Select the internal party you wish to de-register. The handset you are currently using is indicated by <. ¤ OK ¤ Enter the base system PIN (default setting: 0000) ¤ OK Lombok / ZAF_en / A31008-M2401-W101-1-7619 / Lombok.fm / 13.03.2012 11 Using multiple handsets Making internal calls Internal calls are free calls to other handsets that are registered to the same base station. 2 handsets are registered Press the display key INT, the other handset is called. More than 2 handsets are registered Calling a specific handset INT ¤ ~ (1...4, enter internal number of the handset) or INT ¤ u (Select the internal party) ¤ OK or b ¤ the handset is called Calling all handsets (“group call”) INT ¤ P or INT ¤ u Call all ¤ OK or b ¤ all handsets are called When a participant answers you can speak to them. To end the call, press a. Internal consultation call/connecting a call You are in conversation with an external participant. Press the INT display key and call one or all handsets. The external participant hears the hold music. When the internal participant answers: If necessary, announce the external call. Either press the end call key a (the call is transferred to the internal participant), or press the display key ”. You are reconnected with the external participant. When transferring a call you can also press the end call key a before the internal participant answers. Listening in to an external call You are conducting an external call. An internal participant can listen in on this call and take part in the conversation (conference). Prerequisite: The Listening in function must be activated. Version 4, 16.09.2005 Activating/deactivating listening in MENU ¤ u Settings ¤ OK ¤ u Base ¤ OK ¤ u Listening in ¤ OK (‰ = on) Internal listening in (conference) You want to listen in to an existing external call. Press and hold the b key. You can listen in to the call. All participants hear a signal tone. To end: press the end call key a. All participants hear a signal tone. If the first internal participant presses the end call key a, the handset that has “listened in” remains connected to the external participant. Setting the alarm clock Activating/deactivating the alarm clock MENU ¤ u Alarm Clock ¤ OK ¤ Activation ¤ OK (‰ = on) When activated: ¤ ~ (Set the wake-up time) ¤ OK When the alarm clock rings, press any key to switch it off for 24 hours. If the alarm clock is set, the wake-up icon l will appear on the screen and the wake-up time will be displayed instead of the date. Setting the wake-up time MENU ¤ u Alarm Clock ¤ OK ¤ u Wake-up time ¤ OK Enter the wake-up time in hours and minutes, then press OK. Phone settings For details on how to make audio settings, see menu overview ¢ page 16. For details on how to set the system PIN on the base station, see the menu overview ¢ page 16. Changing the display language MENU ¤ u Settings ¤ OK ¤ u Handset ¤ OK ¤ u Language ¤ OK ¤ u (select language) ¤ OK The current language is indicated by ‰. If you accidentally choose a language you do not understand: MENU ¤ 521 (press the keys one after the other) ¤ u (select language) ¤ OK Activating/deactivating music on hold You can make it so that your external participant hears music in case of internal recall and during call transfer. MENU ¤ P#Q5#1M ¤ The number for the current setting flashes: 0 = off; 1 = on ¤ enter number ¤ OK. Lombok / ZAF_en / A31008-M2401-W101-1-7619 / Lombok.fm / 13.03.2012 12 Repeater mode With a repeater you can increase the range of your base station. You will need to activate repeater mode (¢ page 16). Repeater mode and No Radiation mode (¢ page 16) cancel each other out. Resetting the handset You can reset individual settings and changes that you have made. Entries in the directory, the calls list and the handset's registration to the base station will be retained. MENU ¤ u Settings ¤ OK ¤ u Handset ¤ OK ¤ u Reset Handset ¤ OK ¤ Reset? ¤ OK Cancel the reset with a. Restoring the base station When restoring factory settings the No Radiation mode is deactivated, individual settings are reset and all lists are deleted. The date and time are retained. The answering machine (A120A only) is ready for use approx. 15 seconds after the base has been reset. Resetting the base via the menu Handsets are still registered, the system PIN is not reset. MENU ¤ u Settings ¤ OK ¤ u Base ¤ OK ¤ u Base Reset ¤ OK ¤ Reset? ¤ OK Resetting the base using the key on the base Version 4, 16.09.2005 All handsets are de-registered and the system PIN is reset to the original code 0000. Carry out the following steps: Remove the mains cable from the base. Hold down the registration/paging key on the base (¢ page 1) and reconnect the power cable to the base at the same time. Hold the key down for at least 5 seconds. Operating the base station on the PABX/router Operating on the router When operating the Gigaset on an analogue port of a router you can reduce problems with echoes by activating the Echo mode (¢ page 16). If you have no problems with echoes, this function should be deactivated. Operating on the PABX The following settings are only necessary when your PABX requires them; see the user guide for your PABX. When entering the digits, enter them slowly one after the other. Changing the dialling mode MENU ¤ P#Q5#1N ¤ The number for the set dialling mode flashes: 0 = touch tone dialling (DTMF); 1 = dial pulsing (DP) ¤ enter number ¤ OK. Setting recall MENU ¤ P#Q5#1Q ¤ The number for the current recall flashes: 0 = 80 ms; 1 = 100 ms; 2 = 120 ms; 3 = 400 ms; 4 = 250 ms; 5 = 300 ms; 6 = 600 ms; 7 = 800 ms ¤ enter number ¤ OK. Changing pause after line seizure You can set the length of the pause inserted between pressing the talk key b and sending the phone number. MENU ¤ P#Q5#1L ¤ The number for the current pause length flashes: 1 = 1 sec.; 2 = 3 sec.; 3 = 7 sec. ¤ enter number ¤ OK. Changing the pause after the recall key MENU ¤ P#Q5#12 ¤ The number for the current pause length flashes: 1 = 800 ms; 2 = 1600 ms; 3 = 3200 ms ¤ enter number ¤ OK. Lombok / ZAF_en / A31008-M2401-W101-1-7619 / Lombok.fm / 13.03.2012 13 Appendix Questions and answers If you have any queries about the use of your telephone, visit our website at www.gigaset.com/service for 24-hour support. The table below contains a list of common problems and possible solutions. Entering letters/characters Standard characters 1 2 I 4 5 L M N O Q P # Press the relevant key the number of times indicated. Briefly press the hash key # to switch from "Abc" to "123" mode, from "123" to "abc" mode and from "abc" to "Abc" mode. 1x 1 a d g j m p t w 2x £ b e h k n q u x 1) . * / 3x $ c f i l o r v y , ( # 4x ¥ 2 3 4 5 6 s 8 z ? ) @ 5x 6x 7x 8x 9x 10x 11x 12x 13x 14x 15x ¤ ä á à â ã ç ë é è ê ï í ì î ö 7 ü 9 ! < \ ñ ß ú ÿ 0 = & ó ò ô ù û ý æ ø + - : > % § õ å ¿ ¡ " ’ ; 1) Space Specifications Batteries Technology: Nickel-metal-hydride (NiMH); Size: AAA (Micro, HR03); Voltage: 1.2 V; Capacity: 450 - 1000 mAh Version 4, 16.09.2005 General specifications DECT standard GAP standard Range Base station power supply Environmental conditions in operation Base station power consumption In standby mode – Handset in base station – Handset outside base station During a call is supported is supported up to 300 m outdoors, up to 50 m indoors 230 V ~/50 Hz +5 °C to +45 °C, 20% to 75% relative humidity A120/A220 A120A ca. 1.0 W ca. 0.8 W ca. 1.0 W ca. 1.2 W ca. 1.0 W ca. 1.2 W _ Problem Cause Solution Nothing appears in the display. The handset is not switched Press the end call key a for approx. on. 5 seconds or place the handset in the base station. The batteries are flat. Charge or replace the batteries. No wireless connection to the base station, Base flashes in the display. The handset is outside the range of the base station. The handset is not registered. The base station is not turned on. Move the handset closer to the base station. Register the handset ¢ page 10. You cannot hear a ringer/ dialling tone from the fixed line network. The phone cord supplied has not been used or has been replaced by a new cord with the wrong jack connections. Please always use the phone cord supplied or ensure that the pin connections are correct when purchasing from a retailer: 3-4 assignment of telephone leads/ EURO CTR37. The system PIN you have Error tone entered is incorrect. sounds after system PIN prompt. PIN forgotten. Check the mains connector on the base station ¢ page 3. Reset the system PIN to the default 0000 ¢ page 12. All handsets are de-registered. All settings are reset. All lists are deleted. Lombok / ZAF_en / A31008-M2401-W101-1-7619 / Lombok.fm / 13.03.2012 14 Contact with liquid ! If the handset has come into contact with liquid: 1 Switch off the handset and remove the battery pack immediately. 2 Allow the liquid to drain from the handset. 3 Pat all parts dry, then place the handset with the battery compartment open and the keypad facing down in a dry, warm place for at least 72 hours (not in a microwave, oven etc.). 4 Do not switch on the handset again until it is completely dry. When it has fully dried out, you will normally be able to use it again. Customer Service & Assistance Do you have any questions? As a Gigaset customer, you can find help quickly in this User Manual and in the service section of our Gigaset online portal www.gigaset.com/ service. In our constantly updated online service you can find: ◆ Extensive information about our products ◆ FAQ compilations ◆ Keyword search to help find topics quickly ◆ Compatibility database: Find out which base stations and handsets can be combined. ◆ Product comparison: Compare the features of several products with each other. ◆ Downloads for user manuals and current software updates ◆ E-mail contact form for customer service Version 4, 16.09.2005 Please register your phone online right after purchase. This enables us to provide you with even better service regarding questions or an after sales query/issue/claim. In order to contact our customer service via email, please use the email contact form from our Gigaset online portal after selecting your home country. Our representatives are also available on the telephone hotlines for consultation. Lombok / ZAF_en / A31008-M2401-W101-1-7619 / Lombok.fm / 13.03.2012 15 Version 4, 16.09.2005 Customer Service & Assistance Australia . . . . . . . . . . . . . . . . . . . . . . . 1300 780 878 Austria. . . . . . . . . . . . . . . . . . . . . . 0043 1 311 3046 Bahrain . . . . . . . . . . . . . . . . . . . . . .97 31 73 11 173 Belgium . . . . . . . . . . . . . . . . . . . . . . . 0 78 15 66 79 Bosnia Herzegovina . . . . . . . . . . . . . 033 276 649 Brazil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4003 3020 (grandes cidades e regiões metropolitanas Custo de uma ligao local) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0800 888 3020 (demais localidades - Gratuito) Bulgaria . . . . . . . . . . . . . . . . . . . . +359 2 9710666 (0.50 евро на минута от всички държави за стационарни телефони. За обаждания от мобилни телефони може да има други цени). Canada . . . . . . . . . . . . . . . . . . . . . .1-866 247-8758 China. . . . . . . . . . 0 21 400 670 6007 (RMB 0.11) Croatia . . . . . . . . . . . . . . . 01 2456 555 (0,23 Kn) Czech Republic . . . . . . . . . . . . . . . . . 233 032 727 Denmark . . . . . . . . . . . . . . . . +45 (0) 35 25 86 00 Finland . . . . . . . . . . . . . . . . . . . . . . . 09 231 134 25 France. . . . . . . . . . . . . . . . . . . +33 170 706 181 Coût d’un appel local depuis une ligne fixe Orange. Germany . . . . . . . . . . . . . . . . . . . . .01805 333 222 Der Anruf kostet Sie aus den deutschen Festnetzen 0,14 € pro Minute. Anrufe aus den deutschen Mobilfunknetzen kosten höchstens 0,42 € pro Minute. Greece . . . . . . . . . . . . . . . . . . . . 801-100.0.500 (Χρέωση 0,0031 € το λεπτό για το σταθερό δίκτυο της Ελλάδας. Για κλήσεις από κινητό ίσως ισχύουν άλλες χρεώσεις) Hong Kong . . . . . . . . . . . . . . . . . . . . . . . 2763 0203 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2389 7285 Hungary . . . . . . . . . . . . . . . . . 01 267 21 09 (27 Ft) India. . . . . . . . . . . . . . . . . . . . . Please refer to your . . . . . . . . . . . . . . . . . . . . . . . . . . local warranty card Indonesia. . . . . . . . . . . . . . . . . . . (62-21) 5673813 . . . . . . . . . . . . . . . . . . . . . . . . . . .(62-21) 888856000 Ireland. . . . . . . . . . . . . . . . . . . . . . . . 18 50 77 72 77 Italy . . . . . . . . . . . . . . . . . . . . . . . . . . . .199.15.11.15 (€ cent 8,36 + IVA al minuto da telefono fisso della rete Telecom Italia senza scatto alla ris- Authorisation posta mentre per le chiamate effettuate attraverso la rete di altri operatori fissi o mobili consultate le tariffe del vostro operatore) Jordan. . . . . . . . . . . . . . . . . 00962 6 5625460/1/2 Kuwait. . . . . . . . . . . +965 -22458737/22458738 Lebanon. . . . . . . . . . . . . . . . . . . . . .+9611240259/ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+9611236110 Luxembourg. . . . . . . . . . . . . . . . +352 8002 3811 Malaysia . . . . . . . . . . . . . . . . . . . . +603-8076 9696 Malta . . . . . . . . . . . . . . +390 2360 46789 (0,10 €) Mexico . . . 01800 999 4442738 (01800 999 GIGASET) Netherlands . . . . . . . . . . . . . . . . . . 0900-3333102 (0,25 € per minuut (vast net). Voor oproepen uit het mobiele netwerk kunnen andere prijzen gelden.) New Zealand . . . . . . . . . . . . . . . . . . 0800 780 878 Norway . . . . . . . . . . . . . . . . . . . . . . 22 70 84 00 (Oppstartskostnad 89 øre + 15 øre pr. minutt fra fasttelefon. For samtaler fra mobiltelefon gjelder egne priser.) Oman . . . . . . . . . . . .+968 709281 Ext. 49/21/75 Poland. . . . . . . . . . . . . . . . . . . . . . . . . . 801 140 160 Portugal . . . . . . . . . . . . . . . . . . .(351) 808 781 223 (custo de uma chamada local) Romania. . . . . . . . . . . . . . . . . . .+40 021 204 9130 Russia . . . . . . . . . . . . . . . . . . . . . . 8 (495) 2281312 Serbia . . . . . . . . . . . . . . . . . . . . . . . . . 0800 222 111 Singapore . . . . . . . . . . . . . . . . . . . . . . . . 6735 9100 Slovak Republic . . . . . 02 59 68 22 66 (4,428 sk) Slovenija . . . . . . . . . . . . . . . . . . . . . . . .01 5644171 South Africa . . . . . . . . . . . . . . . . +2711 46 13 181 Spain . . . . . . . . . . . . . . . . . . . . . . . . . . . .902 103935 Sweden . . . . . . . . . . . . . . . . . . . . . . . . . 87 50 99 11 Switzerland . . . . . . . . . . . . . . . . . . . . 0848 212 000 Taiwan . . . . . . . . . . . . . . . . . . . . . . . . 02 266 24343 Turkey . . . . . . . . . . . . . . . . . . . . . . . 0216 459 98 59 Ukraine. . . . . . . . . . . . . . . . . . +380-44-451-71-72 United Arab Emirates . . . . . . . +97144458255/ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +97144458254 United Kingdom . . . . . . . . . . . . 0 84 53 67 08 12 USA . . . . . . . . . . . . . . . . . . . . . . . . . 1-866 247-8758 Vietnam . . . . . . . . . . . . . . . . . . . . . . . 1900 545 416 Please have your record of purchase ready when calling. After sales service is not offered in countries where our product is not sold by authorised dealers. This device is intended for connection to analogue networks outside the European Economic Area (with the exception of Switzerland) depending on national type approval. Country-specific requirements have been taken into consideration. We, Gigaset Communications GmbH, declare that this device meets the essential requirements and other relevant regulations laid down in Directive 1999/5/CE. A copy of the Declaration of Conformity is available at this Internet address: www.gigaset.com/docs Dealer or local after-sales services (Southern Africa) In the event of an after-sales query/issue/claim please refer back to your point of purchase. Proof of purchase (receipt) has to be submitted. Environment Environmental management system Gigaset Communications GmbH is certified pursuant to the international standards ISO 14001 and ISO 9001. ISO 14001 (Environment): Certified since September 2007 by TüV SÜD Management Service GmbH. ISO 9001 (Quality): Certified since 17/02/1994 by TüV SÜD Management Service GmbH. Disposal Batteries should not be disposed of in general household waste. Observe the local waste disposal regulations, details of which can be obtained from your local authority. All electrical and electronic equipment must be disposed of separately from general household waste using the sites designated by local authorities. If a product displays this symbol of a crossed-out rubbish bin, the product is subject to European Directive 2002/96/EC. The appropriate disposal and separate collection of used equipment serve to prevent potential harm to the environment and to health. They are a precondition for the re-use and recycling of used electrical and electronic equipment. For further information on disposing of your used equipment, please contact your local authority or your refuse collection service. Lombok / ZAF_en / A31008-M2401-W101-1-7619 / Lombok.fm / 13.03.2012 16 Menu overview Ring Delay * Your phone has an extensive range of features. These are offered in the form of menus. To select a function while the phone is in idle status, press MENU (open menu), use the control key u to scroll to the function you require and press OK to confirm. To return to idle status: press and hold the a key. Not all of the functions described in this user guide are available in all countries. Messages Alarm Clock Activation Wake-up time Audio Settings Handset Volume (Gigaset A120/ A120A) Handset Volume (Gigaset A220) Ringer Volume Ringer Melody AdvisoryTones Battery Low Ring Tones ¢ page 7 ¢ page 11 ¢ page 11 Can be set to one of 5 levels. Earpiece/Speaker 5 levels + "crescendo" available. External Calls/Internal Calls/Alarm Clock On/off On/off On/off Version 4, 16.09.2005 Answer Machine Play Messages Net Mailbox ** ¢ page 10 Answer Mach. ** ¢ page 8 Answer Mach. * ¢ page 8 CallScreening * Switch screening of a message on the handset (hands free mode) (Gigaset A220A) that is being recorded on/off. Prerequisite: at least 1 handset with hands free capability is registered. Deactivate screening for the actual recording only: press end call key a. Announcements * Rec announce/Play announce/Del announce ¢ page 8 Message Length * Maximum/1 Minute/2 Minutes/3 Minutes Immediately/10 sec/18 sec/30 sec Auto If there are no new messages, the answering machine answers a call after 18 seconds. If new messages are present, the answering machine answers a call after just 10 seconds. Netw. Mailbox * ¢ page 10 Net Mailbox *** ¢ page 10 Set Key 1 * Net Mailbox Assign key 1 with network mailbox. (In idle status, press and hold key 1 to dial.) ¢ page 10 Answer Mach. Assign key 1 with answering machine. (In idle status, press and hold key 1 to dial.) ¢ page 8 Language * ¢ page 9 * Base station with answering machine only. ** Base station with answering machine only and if number of network mailbox is entered. *** Base station without answering machine only. Settings Date/Time Handset Base ¢ page 4 Language Auto Answer Register HS De-register HS Reset Handset Call list type System PIN Base Reset Additional ECO DECT ¢ page 1 Listening in Preselection ¢ page 11 ¢ page 5 ¢ page 10 ¢ page 10 ¢ page 12 Missed Calls/All Calls ¢ page 7 Change System-PIN (default: 0000) ¢ page 12 Repeater ¢ page 12 Echo mode see „Operating on the router“¢ page 12 No Radiation on/off ¢ page 11 Presel. Number/With Preselect/ ¢ page 6 Without Presel
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project