TD251EN 01.5.31 7:15 PM Page 1
OWNER’S
MANUAL
“EMERSON AND THE G-CLEF LOGO ARE REGISTERED TRADEMARKS
OF EMERSON RADIO CORP., PARSIPPANY, NEW JERSEY, U.S.A.”
19-INCH COLOR TV/DVD
EWC19D1
SUPPLIED ACCESSORIES
ACCESSORIES
PART NO.
Remote Control Unit N0289UD
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
Batteries
2 AA Batteries
If you need additional assistance for set-up or operating
after reading owner’s manual, please call
TOLL FREE : 1- 800 - 256 - 2487
Please read before using this equipment.
TD251EN 01.5.31 7:15 PM Page 2
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A
RISK OF ELECTRIC SHOCK IS PRESENT
WITHIN THIS UNIT.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT THERE
ARE IMPORTANT OPERATING AND
MAINTENANCE INSTRUCTIONS IN THE
LITERATURE ACCOMPANYING THE
APPLIANCE.
CAUTION
The caution marking is located on the rear of the cabinet.
IMPORTANT SAFEGUARDS
1.Read instructions-All the safety and operating instructions
should be read before the appliance is operated.
Accessoires- Ne placez pas cette TV/DVD sur une table
roulante, un support, un trépied, une console ou une table
instable. Cette TV/DVD risquerait de tomber, pouvant
gravement blesser quelqu'un et l'appareil même pourrait
être sérieusement endommagé. N'utilisez qu'une table
roulante, un support, un trépied, une console ou une table
recommandé par le fabriquant, ou vendu avec la TV/DVD.
Pour n'importe quelle installation de l'appareil, on devra
suivre les instructions du fabriquant et l'on devra utiliser les
accessoires d'installation recommandés par le fabriquant.
L'ensemble combiné de l'appareil avec une table roulante
devra être déplacé avec précaution. Des arrêts brusques,
une force excessive et des surfaces inégales peuvent provoquer le renversement de l'ensemble combiné de
l'appareil/table roulante.
2.Retain Instructions-The safety and operating instructions
should be retained for future reference.
3.Heed Warnings-All warnings on the appliance and in the
operating instructions should be adhered to.
4.Follow Instructions-All operating and use instructions
should be followed.
5.Cleaning-Unplug TV/DVD from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners. Use
a damp cloth for cleaning.
EXCEPTION: A product that is meant for uninterrupted
service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to
unplugging the appliance in the cleaning description otherwise required in item 5.
6.Attachments-Do not use attachments not recommended by
the TV/DVD manufacturer as they may cause hazards.
7.Water and Moisture-Do not use this TV/DVD near waterfor example, near a bath tub, wash bowl, kitchen sink, or
laundry tub, in a wet basement, or near a swimming pool,
and the like.
8.Accessories-Do not place this TV/DVD on an unstable cart,
stand, tripod, bracket, or table. The TV/DVD may fall, causing serious injury to someone, and serious damage to the
appliance. Use only with a cart, stand, tripod, bracket, or
table recommended by the manufacturer, or sold with the
TV/DVD. Any mounting of the
PORTABLE CART WARNING
AVERTISSEMENT POUR UNE
appliance should follow the manu- TABLE
ROULANTE PORTATIVE
facturer’s instructions and should use
a mounting accessory recommended
by the manufacturer. An appliance
and cart combination should be
moved with care.
Quick stops, excessive force, and
uneven surfaces may cause the appli- S3126A
ance and cart combination to overturn.
9. Ventilation-Slots and openings in the cabinet and the back
or bottom are provided for ventilation and to ensure reliable
operation of the TV/DVD and to protect it from overheating, and these openings must not be blocked or covered.
The openings should never be blocked by placing the
TV/DVD on a bed, sofa, rug, or other similar surface. This
TV/DVD should never be placed near or over a radiator or
heat register. This TV/DVD should not be placed in a builtin installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s instructions
have been adhered to.
10.Power Sources-This TV/DVD should be operated only
from the type of power source indicated on the marking
label. If you are not sure of the type of power supply to
your home, consult your appliance dealer or local power
company. For TV/DVDs intended to operate from battery
power, or other sources, refer to the operating instructions.
11.Grounding or Polarization-This TV/DVD is equipped
with a polarized alternating-current line plug(a plug having
one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
–2–
EN
0C28
TD251EN 01.5.31 7:15 PM Page 3
F IGURE A
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECT RICAL CODE
ANTE NNA
L EAD I N
WI RE
GROUND
CLAMP
A NTENNA
DI SCHARG E UN I T
(NEC SECTION 8 10 -2 0)
EL ECT RI C
SE RV I CE
EQ U I PM EN T
G RO UNDI NG CO NDUCT ORS
(NEC SECTION 8 10 -2 1)
G RO UND CL AM PS
NEC - NATI O NAL EL ECTRI CAL CO DE
POWER SERVI C E G RO UNDI NG
EL EC TR O DE SYST EM
(NEC ART 2 50 , PART H)
S2 8 9 8 A
12.Power-Cord Protection-Power-supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles,
and the point where they exit from the appliance.
19.Damage Requiring Service-Unplug this TV/DVD from
the wall outlet and refer servicing to qualified service personnel under the following conditions:
a. When the power-supply cord or plug is damaged or frayed.
13.Outdoor Antenna grounding-If an outside antenna or
cable system is connected to the TV/DVD, be sure the
antenna or cable system is grounded so as to provide some
protection against voltage surges and built-up static
charges. Article 810 of the National Electrical Code,
ANSI/NFPA No. 70, provides information with respect to
proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge unit,
size of grounding conductors, location of antenna-discharge
unit, connection to grounding electrodes, and requirements
for the grounding electrode. (Fig. A)
14.Lightning-For added protection for this TV/DVD receiver
during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This will
prevent damage to the TV/DVD due to lightning and
power-line surges.
15.Power Lines-An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into
such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them
might be fatal.
b. If liquid has been spilled, or objects have fallen into the
TV/DVD.
c. If the TV/DVD has been exposed to rain or water.
d. If the TV/DVD does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions, as improper adjustment of other controls may result in damage and will often
require extensive work by a qualified technician to restore
the TV/DVD to its normal operation.
e. If the TV/DVD has been dropped or damaged in any way.
f. When the TV/DVD exhibits a distinct change in performance-this indicates a need for service.
20.Replacement Parts-When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may
result in fire, electric shock, injury to persons or other hazards.
21.Safety Check-Upon completion of any service or repairs to
this TV/DVD, ask the service technician to perform routine
safety checks to determine that the TV/DVD is in proper
operating condition.
22.Heat-This TV/DVD product should be situated away from
heat sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
16.Overloading-Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
17.Object and Liquid Entry-Never push objects of any kind
into this TV/DVD through openings as they may touch dangerous voltage points or short out parts that could result in
a fire or electric shock. Never spill liquid of any kind on
the TV/DVD.
18.Servicing-Do not attempt to service this TV/DVD yourself
as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified
service personnel.
–3–
EN
0C28
TD251EN 01.5.31 7:15 PM Page 4
PRECAUTIONS
LASER SAFETY
This unit employs a laser. Only a qualified service
person should remove the cover or attempt to service this device, due to possible eye injury.
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.
FCC WARNING- This equipment may generate or use radio frequency energy. Changes or
modifications to this equipment may cause
harmful interference unless the modifications
are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change
or modification is made.
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
CAUTION: VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN AND INTERLOCK
DEFEATED. DO NOT STARE INTO BEAM.
LOCATION: INSIDE, NEAR THE DECK
MECHANISM.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment
and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
4) Consult the dealer or an experienced radio/TV
technician for help.
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
ATTENTION: POUR ÉVITER LES CHOC
ÉLECTRIQUES, INTRODUIRE LA LAME LA
PLUS LARGE DE LA FICHE DANS LA
BORNE CORRESPONDANTE DE LA PRISE
ET POUSSER JUSQU’AU FOND.
–4–
EN
0C28
TD251EN 01.5.31 7:15 PM Page 5
LOCATION
WARNING
For safe operation and satisfactory performance of
your TV/DVD, keep the following in mind when
selecting a place for its installation:
• Shield it from direct sunlight and keep it away from
sources of intense heat.
• Avoid dusty or humid places.
• Avoid places with insufficient ventilation for proper
heat dissipation. Do not block the ventilation holes at
the top and bottom of the unit. Do not place the unit
on a carpet because this will block the ventilation
holes.
• Install unit in a horizontal position.
• Avoid locations subject to strong vibration.
• Do not place the TV/DVD near strong magnetic fields.
• Avoid moving TV/DVD to locations where temperature differences are extreme.
Moisture condensation may occur inside the unit
when it is moved from a cold place to a warm place,
or after heating a cold room or under conditions of
high humidity. If a DVD is played in a TV/DVD
which has moisture, it may damage the DVD and
TV/DVD. Therefore when the condensation occurs
inside the unit, turn the POWER button on and allow
at least 2 hours for the unit to dry out.
AVOID THE HAZARDS OF
ELECTRICAL SHOCK AND FIRE
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting
•
•
•
it from an AC wall outlet. Grasp it by the plug.
If, by accident, water is spilled on your unit, unplug
the power cord immediately and take the unit to our
Authorized Service Center for servicing.
Do not put your fingers or objects into the
TV/DVD disc loading tray.
Do not place anything directly on top of the unit.
A NOTE ABOUT RECYCLING
This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in
accordance with your local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes.
The serial number of this product may be found on the back of the unit. No other TV/DVD has the same serial
number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.
Date of Purchase
Dealer Purchase from
Dealer Address
Dealer Phone No.
Model No.
Serial No.
–5–
EN
0C28
TD251EN 01.5.31 7:15 PM Page 6
TABLE OF CONTENTS
PAUSING PLAYBACK OR DISPLAYING
A STILL PICTURE . . . . . . . . . . . . . . . . . . . . .22
RESUMING PLAYBACK FROM THE
POINT WHERE PLAYBACK STOPPED . . . .22
STEPPING THROUGH FRAMES . . . . . . . . . .22
FAST FORWARD/REVERSE . . . . . . . . . . . . .23
SLOW MOTION . . . . . . . . . . . . . . . . . . . . . . .23
STARTING FROM A DESIRED TRACK . . . .23
STARTING FROM A DESIRED TIME COUNT .23
PLAYING FROM A DESIRED TITLE OR
CHAPTER . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
RANDOM (Audio CD) . . . . . . . . . . . . . . . . . .24
REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
A-B REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . .25
PROGRAM (Audio CD) . . . . . . . . . . . . . . . . .25
C IMPORTANT SAFEGUARDS . . . . . . . . . . . . .2
C PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . .4
LOCATION . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
AVOID THE HAZARDS OF ELECTRICAL
SHOCK AND FIRE . . . . . . . . . . . . . . . . . . . . . .5
WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
C FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
C SUPPLIED ACCESSORIES . . . . . . . . . . . . . . .7
C OPERATING CONTROLS AND FUNCTIONS 8
C PREPARATION FOR USE . . . . . . . . . . . . . . .10
ANTENNA/CABLE CONNECTIONS . . . . . . .10
INSTALLING THE BATTERIES . . . . . . . . . . .12
CONNECTING TO EXTERNAL INPUT JACKS .12
CONNECTING TO A STEREO SYSTEM (for DVD) .13
CONNECTING TO AN AMPLIFIER
EQUIPPED WITH DIGITAL INPUT JACKS,
MD DECK OR DAT DECK (for DVD) . . . . . .13
CONNECTING TO A DOLBY DIGITAL
DECODER OR DTS DECODER (for DVD) . .14
TV SECTION
C SET UP FOR USE . . . . . . . . . . . . . . . . . . . . .15
LANGUAGE SELECTION . . . . . . . . . . . . . . .15
CHANNEL PRESETTING . . . . . . . . . . . . . . .15
C OPERATIONS . . . . . . . . . . . . . . . . . . . . . . . . .16
WATCHING A TV PROGRAM . . . . . . . . . . . .16
SELECTING THE SLEEP TIMER . . . . . . . . .16
CLOSED CAPTION . . . . . . . . . . . . . . . . . . . .16
PICTURE ADJUSTMENT . . . . . . . . . . . . . . . .17
V-CHIP SET UP . . . . . . . . . . . . . . . . . . . . . . . .18
DVD SECTION
C ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . .20
PLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . .20
DISC TYPES . . . . . . . . . . . . . . . . . . . . . . . . . .20
SYMBOLS USED IN THIS MANUAL . . . . . .20
C SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . .26
CHANGING THE AUDIO LANGUAGE OR
SOUND MODE . . . . . . . . . . . . . . . . . . . . . . . .26
CHANGING THE SUBTITLE LANGUAGE . .27
CHANGING THE CAMERA ANGLE
(Multi-Angle Pictures) . . . . . . . . . . . . . . . . . . .27
CHANGING THE ON-SCREEN DISPLAY . . .28
C CHANGING THE SETUP ITEMS . . . . . . . . .29
LANGUAGE SETTINGS . . . . . . . . . . . . . . . .29
VIDEO SETTINGS . . . . . . . . . . . . . . . . . . . . .30
AUDIO SETTINGS . . . . . . . . . . . . . . . . . . . . .30
PARENTAL LOCK . . . . . . . . . . . . . . . . . . . . .31
OTHER SETTINGS . . . . . . . . . . . . . . . . . . . . .32
C LANGUAGE CODE LIST . . . . . . . . . . . . . . . .33
C TROUBLESHOOTING GUIDE . . . . . . . . . . .34
C MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . .37
DISC HANDLING . . . . . . . . . . . . . . . . . . . . . .37
C SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . .38
C WARRANTY . . . . . . . . . . . . . . . . . . .Back Cover
C PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . .21
PLAYING A DVD VIDEO OR AN AUDIO CD .21
USING THE DVD MENUS . . . . . . . . . . . . . . .21
USING THE TITLE MENU . . . . . . . . . . . . . . .22
–6–
EN
0C28
TD251EN 01.5.31 7:15 PM Page 7
FEATURES
TV
¡Tinted, Bright Black Matrix Picture Tube
¡Parental lock
You can set the control level to limit playback of discs
which may not be suitable for children.
¡181 Channel Selection
All VHF/UHF channels plus up to 125 cable channels.
¡Automatic detection of discs
¡PLL Frequency Synthesized Tuning
The latest PLL frequency synthesized electronic tuning
system provides free and easy channel selection, and lets
you tune directly to any channel using the channel number
buttons (0~9 and +100-key) on the remote control.
This player automatically detects if a loaded disc is DVD
or audio CD.
¡On-screen display
Information about the current operation can be displayed
on a TV screen, allowing you to confirm the currently
active functions (such as program playback), on the TV
screen using the remote control.
¡On-Screen Function Display.
¡Full-Function Remote Control
¡Sleep Timer
¡DTS (Digital Theater System)
Sound system different from Dolby Digital sound system
¡Closed Caption Decoder
You may view specially labeled (cc) TV programs,
movies, news, prerecorded tapes, etc. with either a
dialogue caption or text display added to the program.
¡Search
Chapter search: Search for the chapter designated by user
is possible.
Title search:
Search for the title designated by user is
possible.
Track search: Search for the track designated by user is
possible.
Time search: Search for the time designated by user is
possible.
¡Auto Shut Off Function
If there is no air signal input from the antenna terminal and
no operation for 15 minutes, the TV will turn itself off
automatically.
¡V-CHIP
Enables parents to prevent their children from watching
inappropriate material on TV.
¡Repeat
Chapter:
Repeated playback of the chapter of the
disc being played is possible.
Title:
Repeated playback of the title of the disc
being played is possible.
Track:
Repeated playback of the track of the disc
being played is possible.
Disc(audio CD): Repeated playback of the entire disc being
played is possible.
A-B:
The part between A and B designated by
user is possible.
DVD
¡Dolby Digital sound
This player can handle Dolby Digital surround sound
having 5.1 channels when connected to a Dolby Digital
decoder.
¡Still/fast/slow/step playback
Various playback modes are available including still pictures, fast forward/reverse, slow motion and step frames.
¡Zoom
4-time magnified screen can be displayed.
¡Random playback for audio CD
This player can shuffle the order of tracks to play them in
random order.
¡Program playback for audio CD
¡Marker
The part designated by user can be called back.
¡Resume Play
You can program the order of tracks to play them in any
desired order.
¡DVD menus in a desired language
User can resume to playback from the part at which the
play was stopped.
¡SRS TruSurround
You can display DVD menus in a desired language, if
available on a DVD.
¡Screen saver/Auto power-off functions
You can enjoy stereophonic virtual space on your existing
stereo system.
¡Dimmer
The screen saver program starts when there is no input
from the player for five minutes in the stop mode. When
the screen saver program is activated for 30 minutes, the
power is automatically turned off.
Brightness of the display can be varied.
¡Bit rate indication
¡Dynamic range control
¡Subtitles in a desired language
You can select a desired language for the display subtitles,
if that language is available on a disc.
¡Selecting a camera angle
You can select the desired camera angle, if a disc contains
sequences recorded from different angles.
¡Choices for audio language and sound mode
You can select the desired audio language and sound
mode, if different languages and modes are available on a
disc.
–7–
This unit employs TruSurround system
of SRS Labs, Inc. as virtual
technology.
TruSurround and the
SRS Labs, Inc.
symbol are trademarks of
TruSurround technology is incorporated under license
from SRS Labs, Inc.
EN
0C28
TD251EN 01.5.31 7:15 PM Page 8
OPERATING CONTROLS AND FUNCTIONS
[Fig. 1]
TV/DVD FRONT PANEL
POWER
VOLUME
CHANNEL
STOP
SKIP
PLAY
SKIP
PAUSE OPEN/CLOSE
HEADPHONE
1
VIDEO
L-AUDIO-R
2
3
POWER PICTURE SELECT
16
1
2
3
4
5
6
7
8
17
18
10
9
OPEN/
CLOSE
CH.
6
VOL.
5
9
0
+10
SKIP
ZOOM
MUTE
35
19
PLAY
REV
FWD
STOP
DISC
MENU
PAUSE
12
23
20
21
22
15
24
25
6
13
34
+100
SLEEP
5
[Fig. 2]
REMOTE CONTROL
4
36
4
DISPLAY
ENTER
SETUP
TITLE
RETURN
CLEAR SEARCH MODE REPEAT
A-B
AUDIO
ANGLE
MODE
SUBTITLE
11
8
33
32
31
30
29
28
27
26
7
8 181018 12 13 14
5. VOLUME K/L buttons
Press to control the volume level for the DVD and TV.
6. CHANNEL K/L buttons
Press to select memorized channel.
Press to change to TV mode when DVD mode.
7. Remote Sensor Window
8. STOP button
Stops operation of the disc.
9. REV button
Fast reverses playback to a desired point.
10. PLAY button
Starts playback of the disc contents.
Press to change to DVD mode when TV mode.
11. FWD button
Fast forwards playback to a desired point.
12. PAUSE button
Pauses the current disc operation.
13. OPEN/CLOSE button
Press to insert discs into or remove them from the
tray.
14. HEADPHONE jack
To connect headphone (not supplied) for personal
listening.
15. MODE button
Activates program playback or random playback mode.
16. NUMBER button
TV Mode:
Press two digits to directly access the desired
channel.
Remember to press a "0" before a single digit
channel.
+100 button–
1. Disc loading tray
2. VIDEO input jack
Connect to the video output jack of a video
camera or VCR.
3. AUDIO L/R input jacks
Connect to the audio output jacks of a video
camera or VCR.
4. POWER button
Press to turn the power on and off.
Press to select cable channels which are equal or
greater than number 100.
DVD Mode:
Press to enter the desired number.
+10 button–
Press to enter the desired numbers which are
equal or greater than number 10.
–8–
EN
0C28
TD251EN 01.5.31 7:15 PM Page 9
REAR VIEW
[Fig. 3]
1
ANT.
AUDIO OUT DIGITAL OUT
R
L COAXIAL
37
39 38
17. SLEEP button
Press the SLEEP button to display the sleep timer
and start the function. The shut off time can be
determined by the number of times you press the
button. (0, 10, 20, 30,..90, 0 minutes)
18. SKIP buttons
Skip chapters or tracks to a desired point.
19. ZOOM Button
40
31. ENTER button
Press to accept a setting.
32. Arrow buttons
TV Mode:
Press to select a setting mode from the menu on
the TV screen.
Press to select or adjust from a particular menu.
DVD Mode:
Use when making settings while watching the
display on a TV screen.
Enlarges part of a DVD-reproduced image.
20. SETUP button
Press to enter or exit the TV menu or DVD setup
mode.
21. TITLE button
Displays the title menu.
22. CLEAR button
Resets a setting.
23. DISPLAY button
TV Mode:
Press to display the channel number on the
screen. If you press it again, the channel number
will disappear.
DVD Mode:
Displays the current status on the TV screen for
checking purposes.
24. SEARCH MODE button
Press to locate a desired point.
25. AUDIO button
Press to select a desired audio language or sound
mode.
26. SUBTITLE button
Press to select a desired subtitle language.
27. REPEAT button
Repeats playback of the current disc, title, chapter
or track.
28. ANGLE button
Press to change the camera angle to see the
sequence being played back from a different angle.
29. A-B REPEAT button
Repeats playback of a selected section.
30. RETURN button
Returns to the previous operation.
33. DISC MENU button
Displays the menus in the DVD.
34. SELECT button
Press to change to TV mode, external input mode
or DVD mode.
35. MUTE button
Press the MUTE button to turn off the sound
portion of the TV program. (Volume level display
turns LIGHT RED from LIGHT BLUE.) Press the
MUTE button again or press the VOL(ume) K or
L button to restore sound.
36. PICTURE button
Press to enter picture adjustment mode.
37. Power cord
Connect to a standard AC outlet (120V/60Hz).
NOTE: Remove the power cord from the hook to
avoid breaking a wire before you connect
to a standard AC outlet.
38. COAXIAL digital audio out jack
Connect to the digital input of an external
amplifier or decoder.
39. AUDIO L/R output jack
Connect to the analog audio input of an external
amplifier or decoder.
NOTE: The AUDIO output jacks (red/white) on
the rear panel serve to give out DVD
sound, not TV sound and external input
sound.
40. ANT. in jack
Connect to an antenna, cable system, or satellite
system.
–9–
EN
0C28
TD251EN 01.5.31 7:15 PM Page 10
PREPARATION FOR USE
ANTENNA/CABLE CONNECTIONS
VHF/UHF COMBINED ANTENNA
The VHF/UHF Rod Antenna (not supplied) is detachable. Insert the stem of the antenna into the hole on the
upper-back portion of the TV/DVD. Connect the VHF/UHF Rod Antenna or VHF/UHF Combination Antenna
to the ANT. terminal of the TV/DVD as shown in the diagram below. For the best reception, fully extend the
VHF/UHF Rod Antenna and make the necessary adjustments. (Avoid touching the top section when adjusting.)
NOTE:
Before plugging the Rod antenna into antenna terminal, check that the pin is not bent. If it is bent, straighten
the pin as illustrated, then plug the pin into antenna terminal.
Bent pin
Cable
Plug
(Needs to be straightened)
(Straight pin)
VHF/UHF Antenna
(Not supplied)
Rod Antenna
(Not supplied)
ANT.
1
ANT.
AUDIO OUT DIGITAL OUT
R
L COAXIAL
[Fig. 4]
NOTE:
The connection of an indoor antenna may not always give acceptable TV reception.
VHF/UHF SEPARATE ANTENNAS
In some areas it will be necessary to use an outdoor antenna.
VHF Antenna (Not supplied)
1
ANT.
VHF/UHF
Combiner
(Not
supplied)
UHF Antenna
(Not supplied)
AUDIO OUT DIGITAL OUT
R
L COAXIAL
ANT.
Flat twin-lead cable
– 10 –
[Fig. 5]
EN
0C28
TD251EN 01.5.31 7:15 PM Page 11
CABLE WITHOUT CONVERTER/
DESCRAMBLER BOX
Use this connection if your cable system connects directly to your TV/DVD without a converter box.
From Cable System
75-ohm Coaxial
Cable (Not
supplied)
ANT.
1
W
ANT.
AUDIO OUT DIGITAL OUT
R
L COAXIAL
[Fig. 6]
CABLE WITH CONVERTER/
DESCRAMBLER BOX OR SATELLITE BOX
If your cable service supplies you with a converter box or if you use a satellite system, you can use the basic
connection shown here.
OUT
Satellite Box or
Cable Box (Not supplied)
IN
75-ohm Coaxial
Cable
(Not supplied)
From Cable System
or Satellite Dish
ANT.
1
W
ANT.
AUDIO OUT DIGITAL OUT
R
L COAXIAL
[Fig. 7]
Note to CATV system installer:
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC
that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building as close to the point of cable entry as practical.
– 11 –
EN
0C28
TD251EN 01.5.31 7:15 PM Page 12
INSTALLING THE BATTERIES
1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow.
2)Insert 2 "AA" penlight batteries into the battery compartment in the direction indicated by the polarity (+/-)
markings.
3)Replace the cover.
CONNECTING TO EXTERNAL INPUT JACKS
When you watch a program recorded on an another source (VCR or video camera), use the audio/video input
jacks on the front of the TV/DVD.
Connect the audio/video output jacks of another source to the AUDIO L/R and VIDEO jacks of this TV/DVD.
Then press the SELECT button until "VIDEO" appears on the screen.
NOTE:
• When you connect a monaural VCR (another source) to this TV/DVD, connect the Audio output jack of the
monaural VCR (another source) to the AUDIO L jack of this TV/DVD. The audio will output in both L and
R channel equally.
To the audio
output jacks
[Another source]
Audio/Video
coaxial cable
(not supplied)
VIDEO
L-AUDIO-R
etc.
To the video
output jack
[Front of the TV/DVD]
[Fig. 8]
Antenna/Cable Connections Continued on the Next Page.
– 12 –
EN
0C28
TD251EN 01.5.31 7:15 PM Page 13
CONNECTING TO A STEREO SYSTEM (for DVD)
1
ANT.
AUDIO OUT DIGITAL OUT
R
L COAXIAL
Stereo system
To Right (red) and Left (white)
AUDIO OUT jacks
(only DVD AUDIO OUT)
To ANALOG AUDIO INPUT jacks
[Fig. 9]
NOTES:
• Be sure to turn off the power to all components in the system before connecting another component.
• Refer to the Owner's Manuals for your, stereo system and any other components to be connected to the
TV/DVD.
• The AUDIO output jacks (red/white) on the rear panel serve to give out DVD sound, not TV sound and
external input sound.
CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL
INPUT JACKS, MD DECK OR DAT DECK (for DVD)
Use an audio coaxial digital cable (commercially available) for the audio connections.
ANT.
AUDIO OUT DIGITAL OUT
R
L COAXIAL
To DIGITAL AUDIO OUT
(PCM/BITSTREAM)
COAXIAL jack
(only DVD AUDIO OUT)
Amplifier equipped with digital
input jacks, MD deck,
DAT deck, etc.
To COAXIAL DIGITAL
AUDIO INPUT jack
[Fig. 10]
NOTES:
• The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital
sound by an MD or DAT deck.
• Be sure to turn off the power to all components in the system before connecting another component.
• Refer to the Owner's Manuals for the components to be connected to the TV/DVD.
• Set DOLBY DIGITAL and DTS to OFF for audio output in the setup mode. Playing a TV/DVD using
incorrect settings may generate noise distortion, and may also damage the speakers.
• When DOLBY DIGITAL is set to OFF and VIRTUAL 3D to ON for audio output in the setup mode and
you select the audio source in a 5.1 channel Dolby Digital surround format, the audio will be muted.
– 13 –
EN
0C28
TD251EN 01.5.31 7:15 PM Page 14
CONNECTING TO A DOLBY DIGITAL DECODER
OR DTS DECODER (for DVD)
If using this TV/DVD to play back a TV/DVD in a 5.1 channel Dolby Digital surround or DTS surround format, the TV/DVD outputs a Dolby Digital or DTS data stream from its COAXIAL digital audio out jack. By
hooking the player up to a Dolby Digital or DTS decoder, you can enjoy a more convincing, realistic ambience with powerful and high-quality surround sound of a professional standard such as can be heard in movie
theaters.
Use audio coaxial digital cables (commercially available) for the audio connections.
Front speaker
(left)
Center
speaker
Dolby Digital
or DTS decoder
Surround
speaker
(left)
1
Front speaker
(right)
ANT.
AUDIO OUT DIGITAL OUT
R
L COAXIAL
To COAXIAL DIGITAL
AUDIO INPUT jack
Surround
speaker
(right)
To DIGITAL AUDIO OUT
(PCM/BITSTREAM)
COAXIAL jack
Subwoofer
[Fig. 11]
NOTES:
• Be sure to turn off the power to all components in the system before connecting another component.
• Refer to the Owner's Manuals for the components to be connected to the TV/DVD.
• If connected to a Dolby Digital decoder, set DOLBY DIGITAL to ON for audio output in the setup mode.
• If connected to a DTS decoder, set DTS to ON for audio output in the setup mode.
• Unless connected to a Dolby Digital decoder or a DTS decoder, set DOLBY DIGITAL and DTS to OFF for
audio output in the setup mode. Playing a TV/DVD using incorrect settings may generate noise distortion,
and may also damage the speakers.
• When DOLBY DIGITAL is set to OFF and VIRTUAL 3D to ON for audio output in the setup mode and
you select the audio source in a 5.1 channel Dolby Digital surround format, the audio will be muted.
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby
Laboratories. Confidential Unpublished
Works. ©1992-1997 Dolby Laboratories, Inc.
All rights reserved.
“DTS” and “DTS Digital Out” are trademarks
of Digital Theater Systems, Inc.
– 14 –
EN
0C28
TD251EN 01.5.31 7:15 PM Page 15
TV SECTION
SET UP FOR USE
Getting started
1
2
Connect the power cord to a standard AC outlet.
NOTE: If some digits appear in the corner of the
screen, press the POWER button without unplugging
the power cord.
Press the Arrow K or L button to
point to "CHANNEL SET". Then,
press the Arrow B button.
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
3
2
Press the POWER button to turn on the TV/DVD.
3
Press the SELECT button on the remote control until
channel number or "TV" appears on the screen.
Then press the TV button.
LANGUAGE SELECTION
If you want to change the language of the on-screen
menu, follow the procedure below.
1
Press the SETUP button so that the
setup display appears on the TV
screen.
2
Press the Arrow K or L button to
point to "LANGUAGE".
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
3
Select "ENGLISH", "ESPAÑOL" = Spanish or
"FRANÇAIS" = French by using the Arrow B or s
button.
4
Press the SETUP button to exit the setup.
NOTE: An on-screen display language must be
selected each for the TV mode and DVD mode.
CHANNEL PRESETTING
To preset a channel or to change a preset channel,
follow the procedure below.
1
Press the SETUP button so that the
setup display appears on the TV
screen.
Press the Arrow K or L button to
ADD/DELETE
point to "AUTO MEMO". Then,
AUTO MEMO
press the Arrow B button.
The tuner scans and memorizes all
active channels in your area.
• The TV distinguishes between standard TV channels and cable channels.
• When AUTO MEMO action is completed, the lowest memorized channel reappears on the screen.
• When you press the Arrow K or L button after
selecting AUTO MEMO, the tuner will stop at the
memorized channels only.
• The TV/VCR may memorize TV channels as
CATV channels if reception conditions are poor. If
this happens, try the AUTO MEMO action again
when reception conditions are better.
[ADD/DELETE FUNCTION]
1)Press the SETUP button so that the setup display
appears on the TV screen.
CHANNEL SET
LANGUAGE [ENGLISH]
2)Press the Arrow K or L button
ESPAÑOL
FRANÇAIS
to point to "CHANNEL SET".
V-CHIP SET UP
Then, press the Arrow B button. CAPTION [OFF]
3)Press the Arrow K or L button
to point to "ADD/DELETE".
ADD/DELETE
AUTO MEMO
Then press the Arrow B button.
4)Use the Arrow K or L button to
select the channel you wish to
put into memory or to erase from memory.
NOTE: The display will return to the screen in
about 10 seconds. Perform "ADD/DELETE" function while this display appears on the screen.
Press
the Arrow B or s button to light up the
•
channel number in LIGHT BLUE if you wish to
add the channel into memory.
• Press the Arrow B or s button to light up the
channel number in LIGHT RED if you wish to
erase the channel from memory.
5)Press the SETUP button to exit the setup.
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
– 15 –
EN
0C28
TD251EN 01.5.31 7:15 PM Page 16
OPERATIONS
DEGAUSSING
WATCHING A TV PROGRAM
Magnetism from nearby appliances might affect the
color of the TV picture.
If this happens, move this unit away from the appliance. If the color is still not correct, disconnect power
cord from AC outlet then reconnect it after 30 minutes.
1
Select the desired channel with the CH(annel) K or
L button.
2
CLOSED CAPTION
Adjust the volume to the desired listening level using
the VOL(ume) K or L button.
This TV can receive C1 and C2 of Caption and Text.
3
CAPTION MODE
Adjust picture controls for a natural looking image.
(See "PICTURE ADJUSTMENT".)
Note: Suppose that the TV/DVD is shut off or in any
other mode than TV. Press the CHANNEL K or L
button on the TV/DVD, and the TV/DVD will be in
the TV mode to watch television.
SELECTING THE SLEEP TIMER
The sleep timer function enables you to shut off the
power without pressing the POWER button after a
desired time period.
TEXT MODE
1
Press the SLEEP button on the remote control.
2
You may change the sleep time
with pressing the SLEEP button on
the remote control repeatedly. The
SLEEP 10
timer is set up to 90 minutes, 10
minutes each time the SLEEP button is pushed. (The
timer display counts up and sleep timer will be displayed on the screen when you press the SLEEP button on remote control.)
To cancel the sleep timer:
Press the SLEEP button repeatedly until "SLEEP 0"
is displayed.
NOTES:
• When you disconnect the unit from the AC outlet,
or if you have a power failure, the sleep time will
be lost.
• When the TV mode is changed to the DVD mode,
the sleep time will be lost.
1)Characters can be displayed on the TV screen when
the received broadcast signal contains the Caption
Signals.
2)Paint-on mode: Displays input characters on the
screen immediately.
Pop-on mode: Once characters are stored in memory, it is displayed all at once.
Roll-up mode: Displays the characters continuously by scrolling (max. 4 lines)
NOTE: If the CAPTION C1 or C2 is selected but the
caption signal is not included, characters will not be
displayed.
1)Displays the text on the screen by scrolling (max. 7
lines)
2)If the received broadcast signal does not contain
the caption or text signal, no change will occur.
NOTES:
1)When your TV receives a special effects playback
signal (i.e., Search, Slow, Still) from a VCR’s
video output channel (CH3 or CH4), your TV may
not display the correct caption or text.
2)Captions and texts may not match the TV voice
exactly.
3)Interference may cause the closed caption system
not to function properly.
4)The caption or text characters will not be displayed
while the setup display or function’s display is
shown.
– 16 –
EN
0C28
TD251EN 01.5.31 7:15 PM Page 17
5)If you see this screen!!
2
Select the feature you wish to adjust with the Arrow
K or L button and adjust it with the Arrow B or s
button.
If your TV displays a black box on the screen, this
means that your TV is set to TEXT mode. To clear
screen, select CAPTION C1, C2 or CAPTION
[OFF].
CLOSED CAPTION SELECTION
You may view specially labeled (cc) TV programs,
movies, news, prerecorded tapes, etc. with either a
dialogue caption or text display added to the program.
1
Press the SETUP button so that the setup display
appears on the TV screen.
2
Press the Arrow K or L button to point to "CAPTION".
3
Press the Arrow B or s button to select the mode
you wish.
4
When done, press the SETUP button to exit the
setup.
: Press the Arrow B or s button.
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [ C1]
GAME MODE
Set to the most suitable position for TV GAME.
[B] : ON
[s] : OFF
BRIGHT
Adjust until the whitest parts of the picture are as
bright as you prefer.
[B] : increase brightness
[s] : decrease brightness
CONTRAST
Adjust to increase or decrease contrast.
[B] : increase contrast
[s] : decrease contrast
COLOR
Adjust to be brilliant or pale color.
[B] : be brilliant color
[s] : be pale color
TINT
Adjust to obtain natural skin tones.
[B] : greenish tone
[s] : reddish tone
NOTES:
• In the above steps, the picture adjustment display
will disappear from the TV screen after about 10
seconds unless you press any buttons, even though
you may not be finished. Press the SETUP and
Arrow B button so that "PICTURE" mode is
selected. Then, press the Arrow K or L button
repeatedly until the display returns to the screen.
• If you adjust the other Picture control after you set
the Game mode to [ON], the Game mode is set to
[OFF] automatically. If you want to set the Game
mode, reset it to [ON].
: Press the Arrow ▲ or ▼ button.
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [ C2]
[ ] GAME MODE [ ]
OFF
ON
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [ T2]
[ ]
BRIGHT
[ ]
[ ]
CONTRAST
[ ]
[ ]
COLOR
[ ]
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [ T1]
PICTURE ADJUSTMENT
1
[ ]
Press the PICTURE button.
– 17 –
TINT
[ ]
EN
0C28
TD251EN 01.5.31 7:15 PM Page 18
V-CHIP SET UP
V-CHIP enables parents to prevent their children
from watching inappropriate material on TV.
V-CHIP reads the ratings for programming (except
for news and sports programs, unedited movies on
premium cable channels, and Emergency Broadcast
System signals), then denies access to programming
if the program's rating meets the limitations you
select. In this case, "PROTECTED PROGRAM by
..." message appears on the TV screen. You can
watch the protected program by entering access code
(default 0000).
To block ratings, follow the steps below.
• Programming may be rated by the Motion Picture
Association of America (MPAA) or according to
the Television Parental Guidelines. In order to
block any inappropriate programming, set your
limits in both places (MPAA RATING and TV
RATING).
• You cannot access the menu when the "PROTECTED PROGRAM by ..." message appears. In this
case, change to the unblocked channel, then press
the SETUP button.
[MPAA RATING SET UP]
• When you select the rating category and turn it
[BLOCK], the higher rating will turn [BLOCK]
automatically. Also, the lower rating will turn
[VIEW] automatically.
When you turn "G" to [BLOCK] or [VIEW], the
all ratings will turn to [BLOCK] or [VIEW] automatically.
When you turn "X" to [VIEW], the all ratings will
turn to [VIEW] automatically.
•
•
5
Press the SETUP button to exit the setup.
[TV RATING SET UP]
1
1
Press the Arrow K or L button to
point to "V-CHIP SET UP". Then,
press the Arrow B button.
• NC-17:
• X:
<Rating Category Explanations>
General Audience
Parental Guidance suggested.
Unsuitable for children under 13
Restricted; under 17 requires
accompanying parent or adult
guardian
No one under 17 admitted
Mature audience only
Press the SETUP button so that the setup display
appears on the TV screen.
Press the SETUP button so that the setup display
appears on the TV screen.
2
<Selection>
• G:
• PG:
• PG-13:
• R:
2
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
Press the Arrow K or L button to
point to "V-CHIP SET UP". Then,
press the Arrow B button.
3
3
Use the number buttons to enter 4digit access code. The default code
is 0000.
ACCESS CODE
- - - -
Use the number buttons to enter 4digit access code. The default code
is 0000.
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
ACCESS CODE
- - - -
4
4
Press the Arrow K or L button to
point to "MPAA RATING". Then,
press the Arrow B button.
TV RATING
MPAA RATING
CHANGE CODE
Press the Arrow K or L button to
point to "TV RATING". Then,
press the Arrow B button.
4
5
Press the Arrow K or L button to
point to your desired item.
Then, press the Arrow B button to
select [BLOCK] or [VIEW].
G
PG
PG-13
R
NC-17
X
[VIEW]
[VIEW]
[VIEW]
[BLOCK]
[BLOCK]
[BLOCK]
Press the Arrow K or L button to
point to your desired item. Then,
press the Arrow B button to select
[BLOCK] or [VIEW].
– 18 –
TV RATING
MPAA RATING
CHANGE CODE
TV-Y
TV-Y7 (
TV-G
TV-PG (
TV-14 (
TV-MA (
[VIEW]
) [VIEW]
[VIEW]
) [VIEW]
) [VIEW]
) [VIEW]
EN
0C28
TD251EN 01.5.31 7:15 PM Page 19
<Selection>
• TV-Y:
• TV-Y7:
• TV-G:
• TV-PG:
• TV-14:
• TV-MA:
[CHANGE ACCESS CODE]
To change access code, follow the steps.
<Rating Category Explanations>
Appropriate for all children
Appropriate for children seven and
older
General Audience
Parental Guidance suggested.
Unsuitable for children under 14
Mature audience only
1
Press the SETUP button so that the setup display
appears on the TV screen.
2
• When you select the rating category and turn it
•
•
Press the Arrow K or L button to
point to "V-CHIP SET UP". Then,
press the Arrow B button.
[BLOCK], the higher rating will turn [BLOCK]
automatically. Also, the lower rating will turn
[VIEW] automatically.
When you turn "TV-Y" to [BLOCK] or [VIEW],
the all ratings will turn to [BLOCK] or [VIEW]
automatically.
When you turn "TV-MA" to [VIEW], the all ratings will turn to [VIEW] automatically.
3
Use the number buttons to enter 4digit access code. The default code
is 0000.
When you select TV-Y7, TV-PG, TV-14, or TV-MA
and you press the Arrow B button, the sub-ratings
will appear on the TV screen.
If you select the rating category (example: TV-PG)
and turn it [BLOCK] or [VIEW], the sub-ratings
(example: V for Violence) will turn [BLOCK] or
[VIEW] automatically.
You can set the sub-ratings to [BLOCK] or [VIEW]
individually when the rating category is set to
[BLOCK]. To set the sub-ratings individually, follow
the steps below.
• When you select [TV-Y7]:
•
•
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
TV-Y7
[BLOCK]
FV
[BLOCK]
Press the Arrow K or L button
to select "FV" (Fantasy
Violence). Then, press the Arrow
TV-PG
[BLOCK]
B button to select [BLOCK] or
[VIEW].
D
[BLOCK]
[BLOCK]
L
When you select [TV-PG],
[BLOCK]
S
[BLOCK]
V
[TV-14] or [TV-MA]:
Press the Arrow K or L button
TV-Y
[VIEW]
to select "D"(Suggestive
) [VIEW]
TV-Y7 (
[BLOCK]
TV-G
Dialog), "L"(Coarse Language),
TV-PG (DLSV) [BLOCK]
TV-14 (DLSV) [BLOCK]
"S"(Sexual Situation), or
TV-MA ( LSV) [BLOCK]
"V"(Violence). Then, press the
Arrow B button to select [BLOCK] or [VIEW].
NOTE: When you select [TV-MA], "D" does not
appear on the TV screen.
The sub-ratings which set to [BLOCK] appears
next to the rating category in the TV RATING
menu.
ACCESS CODE
- - - -
4
Press the Arrow K or L button to
point to "CHANGE CODE". Then,
press the Arrow B button.
TV RATING
MPAA RATING
CHANGE CODE
5
Use the number buttons to enter
your desired access code in the
NEW CODE space. Then enter the
same code in the CONFIRM
CODE space. V-CHIP SET UP
screen appear on the screen.
• If you enter wrong code, repeat
step 5, making sure you enter
the same new code exactly in
the confirm code space.
NEW CODE
- - - CONFIRM CODE
- - - -
NEW CODE
x x x x
CONFIRM CODE
- - - -
6
Press the SETUP button to exit the setup.
Note:
• If you unplug the power code or power failure
occures, the changed access code will be lost and
will return to default (0000). Change your access
code again as necessary.
5
Press the SETUP button to exit the setup.
– 19 –
EN
0C28
TD251EN 01.5.31 7:15 PM Page 20
DVD SECTION
ABOUT THE DISCS
¡Photo CD
PLAYABLE DISCS
The following discs can be played back on this DVD
player.
Disc Type
Logo
DVD
Video
Audio
CD
Contents
Disc Size
Maximum
Playback Time
12 cm
Approx. 4 h
(single-sided)
Approx. 8 h
(double-sided)
8 cm
Approx. 80 min
(single-sided)
Approx. 160 min
(double-sided)
12 cm
74 min
8 cm
(singles)
20 min
Sound
and
Pictures
Sound
(Never play back, otherwise malfunction may
result.)
¡Video CD
(Never play back, otherwise malfunction may
result.)
Any other discs without compatibility indications
DISC TYPES
This player conforms to the NTSC color system. You cannot play discs recorded in other color systems such as
PAL or SECAM.
[DVD]
Data on a DVD is divided into sections called "titles", and
then into subsections called "chapters", each of which is
given a title or chapter number. Playback conditions are
preset on some DVD video discs, and these playback conditions take priority over user operations on this player. If
a function you selected do not run as desired, refer to the
manual accompanying the disc.
Example
¡Some discs include region codes as shown below.
Title 1
Title 2
Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1 Chapter 2
¡The number inside the symbol refers to a region of the
world, and a disc encoded in a specific region format
can only be played back on DVD players with the same
region code.
The following discs cannot be played back on this
DVD player.
[AUDIO CD]
Data on an audio CD is divided into sections called
“tracks”, each of which is given a track number.
Example
Track 1
¡DVD with region codes other than 1 or ALL.
Track 2
Track 3
Track 4
Track 5
Track 6
¡DVD-ROM
¡DVD-RAM (Never play back, otherwise mal-
function may result.)
¡CD-ROM
¡VSD
¡CDV (Only plays back the audio part.)
¡CD-G (Only plays back the sound.)
¡CD-R
(Never play back, otherwise malfunction may
result.)
¡CD-I
(Never play back, otherwise malfunction may
result.)
– 20 –
EN
0C28
TD251EN 01.5.31 7:15 PM Page 21
PLAYING A DISC
PLAYING A DVD VIDEO
OR AN AUDIO CD
DVD
CD
Getting started
Turn on the power of the TV, amplifier and any other
components which are connected to the DVD player.
(Change the input system to suit the DVD player, and
check that the sound volume is correct.)
1 Press the POWER button.
¡The power will turn on.
2 Press the OPEN/CLOSE button.
Notes
¡When the DVD mode has been switched to the TV
mode, the DVD mode shut down first and then TV
picture and sound appears in about 4 seconds.
Similarly, when the POWER button is pressed off in
the DVD mode, this mode shut down first and then
the set’s power is turned off.
¡A “prohibited icon” may appear at
the top-right on the TV screen
during operation, warning that a
prohibited operation has been
encountered by the DVD player
or the disc.
¡If a disc is dirty or has scratches, the pictures may
¡The disc loading tray will open.
appear distorted and the playback operation may
stop. In such cases, clean the disc and unplug the
power cord and then plug it again before resuming
playback.
3 Place a disc into the tray.
¡Make sure the disc is sitting properly in the correct
recess, with the label side up.
¡With DVDs that use some titles for playback
program signals, playback may start from the second
title, or it may skip these titles.
USING THE DVD MENUS
DVD
4 Press the PLAY button.
¡The tray will close automatically, and playback will
then start from the first chapter or track of the disc.
You need to press the PLAY button only when the
tray has been closed by pressing the OPEN/CLOSE
button.
¡When you play back the DVD which a title menu is
recorded, the menu may appear on the screen. In this
case, refer to “USING THE TITLE MENU”.
5 Press the STOP button to stop play.
Some DVDs contain their own menus, such as a
guidance menu which describes the contents of the
disc or a selection menu for sound, language and other
customized settings.
1 Press the DISC MENU button.
¡The DVD menu will appear.
2 Select the desired title.
¡Press the arrow buttons (L/K/B/s) to change the
setting, and then press the ENTER button.
3 Playback will start from the selected title.
– 21 –
EN
0C28
TD251EN 01.5.31 7:15 PM Page 22
USING THE TITLE MENU
DVD
RESUMING PLAYBACK FROM
THE POINT WHERE
PLAYBACK STOPPED
DVD
With a DVD containing a title menu, you can select
desired titles from the menu.
CD
1 Press the STOP button during playback.
1 Press the TITLE button.
¡Playback will stop, and then
¡The title menu will appear.
appear the resuming message at
the center.
Press 'PLAY' to play from here
To play beginning, press 'STOP' first
and the 'PLAY'.
2 Select the desired title.
¡Press the arrow buttons (L/K/B/s) to change the
setting, and then press the ENTER button.
2 Press the PLAY button. Playback will start
from the point where the previous playback
session was stopped.
Play B
CALLING UP A MENU SCREEN
DURING PLAYBACK
Notes
For DVDs
¡Resuming playback is not available with some discs.
¡Press the DISC MENU button to call up the DVD
menu.
¡If you switch to the TV mode during DVD playback,
the resuming
¡Press the TITLE button to call up the title menu.
¡It is possible to switch from the DVD play mode to
the TV mode. Even if the power is turned off, the
resume function enables to playback on from the
previously interrupted point. But note that the
Marker commands are not saved.
Note
¡Contents of menus and corresponding menu
operations may vary between discs. Refer to the
¡The resume function can be reset by pressing the
manual accompanying the disc for details.
STOP button twice or by opening the disc loading
tray.
PAUSING PLAYBACK OR
DISPLAYING A STILL PICTURE
DVD
STEPPING THROUGH FRAMES
CD
DVD
1 Press the PAUSE button during playback.
¡Playback will pause, with sound
1 Press the PAUSE button while playback is
Pause F
muted.
paused.
¡The next picture frame is dis-
Pause F
played with sound muted each
time the button is pressed.
2 Press the PLAY button to resume playback.
2 Press the PLAY button to resume playback.
Play B
Play B
– 22 –
EN
0C28
TD251EN 01.5.31 7:15 PM Page 23
FAST FORWARD/REVERSE
1 Press the numeric buttons to enter the
desired track number.
DVD
CD
¡The selected track will be located, and playback will start.
1 Press the FWD g or REV h button during playback.
¡For DVDs, pressing the FWD g or REV h
button cycles the playback speed in three steps.
¡For audio CDs, the playback speed is ×16 fixed.
You can also press the SEARCH MODE button, use
the numeric buttons to enter the track number, when
the track number is entered in the
entry box, playback of the desired
track will start automatically.
Search
Track: __ / 26
FWD D Button
REV E Button
Ex2
Dx2
Ex8
Dx8
TRICKS WITH THE SKIP BUTTONS (H, G)
Ex32
Ex32
2 Press the PLAY button to return to normal
playback speed.
If the SKIP button G is pressed during playback or
while playback is paused, the current track is
skipped and the next track is played. When the SKIP
button H is pressed once, the top of the current
track is located for replaying. When the SKIP button
H is pressed again while Within 2-second
playback, the previous track is located.
SLOW MOTION
STARTING FROM A DESIRED
TIME COUNT
DVD
DVD
1 Press the FWD g button while playback is
CD
paused. (Sound remains muted.)
1 Press the SEARCH MODE button.
¡Slow motion mode will be activated.
¡Pressing the FWD g button cycles the playback
¡Press the button twice for DVDs
speed in three steps. Select an appropriate speed
while referring to the speed indication on the screen.
or two times for audio CDs.
Search
Time _:__:__
Total Time 1:29:00
FWD D Button
×1/16
2 Press the numeric buttons to set the desired
×1/8
time count.
¡Example: 1 hour, 23 minutes and
×1/2
Search
Time _:__:__
Total Time 1:29:00
30 seconds
1→2→3→3→0
2 Press the PLAY button to return to normal
Notes
playback speed.
Notes
¡In the case of DVD, Time Search in Title is effec-
tive. (But Time Search in Chapter is ineffective.)
¡Slow playback is not available with audio CDs.
¡The reverse of slow playback is not available.
STARTING FROM A DESIRED
TRACK
CD
¡In the case of CD, Time Search in Track is effective.
(But Time Search in the entire disc is ineffective.)
¡Playback from a desired time count is not available
with some discs.
¡Specific time playback is not available with some
discs or if the unit is in stop mode.
– 23 –
EN
0C28
TD251EN 01.5.31 7:15 PM Page 24
PLAYING FROM A DESIRED
TITLE OR CHAPTER
REPEAT
DVD
DVD
CD
1 Press the REPEAT button.
You can also press the SEARCH MODE button, use
the numeric buttons to enter the chapter number.
For DVDs
¡Perform the title search and the
¡A single title or chapter is played back repeatedly.
chapter search after setting them on
the same screen at the same time.
Changeover by K/L buttons.
Note
¡Playback from a desired title or
¡Pressing the REPEAT button cycles the display on
the screen as follows.
Search
Title
: 1/4
Chapter:__ / 17
Search
Title
: 1/4
Chapter:__ / 17
Repeat
[Title]
The current Title is
played back repeatedly.
Repeat
[Chapter]
The current Chapter is
played back repeatedly.
Repeat
[Off]
No repeat playback.
chapter is not available with some
DVDs.
RANDOM (Audio CD)
For audio CDs
¡The whole disc or a single track is played back
CD
repeatedly.
¡Pressing the REPEAT button cycles the display on
1 Press the MODE button in stop mode.
the screen through All, Repeat Track and Off.
¡The program setting menu screen will appear.
2 Press the MODE button again.
Repeat
[All]
The whole Disc is
played back repeatedly.
Repeat
[Track]
The current Track is
played back repeatedly.
Repeat
[Off]
No repeat playback.
Audio CD
Random
Start : PLAY Exit : MODE
3 Press the PLAY button. Random playback
will then start.
Note
¡Program playback is not available during random
playback.
If the REPEAT button is pressed once during program/random playback, the program/random playback is performed
repeatedly.
If the REPEAT button is pressed again, the
current track is played back repeatedly.
Notes
¡Repeat playback is not available with some discs.
¡The REPEAT setting will be cleared when moving
to other title, chapter or track.
– 24 –
EN
0C28
TD251EN 01.5.31 7:15 PM Page 25
A-B REPEAT
PROGRAM (Audio CD)
DVD
CD
CD
1 Press the MODE button in stop mode.
You can define a section to be played back repeatedly.
1 Press the A-B REPEAT button during playback.
¡The starting point (A) will then be
¡The program screen will appear.
Audio CD
Program
Total
[Track]
––
[Time]
0:00:00
Repeat
[A- ]
selected.
Track
00 / 15
Start : PLAY Delete : CLEAR
Random : MODE Exit : RETURN
2 Press the numeric buttons to enter the
desired track numbers.
2 Press the A-B REPEAT button again at the
¡The total playback time for the
selected tracks will appear on the
TOTAL line.
end point (B) of the desired section.
¡The selected section will be
Audio CD
Program
Total
[Track]
12
[Time]
0:47:29
02 05 07 14 01 09 13 10 03 11
08 04
Track
04 / 15
Start : PLAY Delete : CLEAR
Random : MODE Exit : RETURN
Repeat
[A-B]
played back repeatedly.
3 Press the PLAY button.
¡Playback will start in the programmed order.
3 To exit A-B repeat playback, press the A-B
¡While the program is being played back, the STOP
button works as follows.
REPEAT button and set it to OFF.
¡Press the STOP button once and then the PLAY
Repeat
[ off ]
Notes
¡With DVDs, the A-B repeat section can be set only
within the current title.
¡With audio CDs, the A-B repeat section can be set
within the current track.
button again, playback will restart from the point
where the STOP button was pressed. (Program
continued)
¡Press the STOP button twice and then the PLAY
button again, playback will restart from the first tune
in the program in the usual way. (Program
continued)
¡Press the STOP button three times and then the
PLAY button again, playback will restart from the
track in the usual way. (Program cleared)
¡A-B repeat is not available with some scenes in
DVD.
Notes
¡To cancel the A point which was set, press RETURN
button.
¡Adding programs is not possible during program
playback. You must stop the current playback before
such operations can be carried out.
¡Press the CLEAR button to cancel a program. The
most recently entered program will then be deleted.
¡Numbers which exceed the number of tracks on the
disc in the tray are not accepted.
¡Playback from a desired track and random playback
are not available during program playback.
¡Program settings are cleared when the power is
turned off or the disc loading tray is opened.
¡If the track no. is once set in the program, the setting
cannot be changed.
– 25 –
EN
0C28
TD251EN 01.5.31 7:15 PM Page 26
SETTINGS
CHANGING THE AUDIO
LANGUAGE OR SOUND MODE
ZOOM PLAYBACK
(enlargement onscreen)
DVD
DVD
Images can be enlarged four times on the screen to
your taste.
The DVD player has a function which allows you to
select the desired audio language and sound mode.
Press the ZOOM button during playback.
For DVDs
¡An image will be enlarged at the center of the
Press the AUDIO button during playback, and then
press the AUDIO button to select the desired audio
language.
screen.
¡Press the ZOOM button again, and the image will be
¡The audio language can be changed if multiple
back to the previous size.
languages are recorded on the DVD being played.
Zoom [on]
Audio 1 , English / 8
Audio 2 , French / 8
Audio 8 , Japanese / 8
When the cursor (K/ L/s/ B) button is pressed
during zoom play, the part to be zoomed moves.
¡The zooming frame can be moved from the center
.... 4 steps to the right. 4 steps to the left. 4 steps to
the top. 4 steps to the bottom.
HELLO
Bonjour
Notes
¡Pressing the Audio button may not work on some
DVDs with multiple audio languages (e.g. DVDs
which allow audio language setting on the disc
menu). Operation varies between discs, so refer to
the manual accompanying the disc.
¡If a desired language is not shown after pressing the
Audio button several times, the disc does not have
an audio source in that language.
¡The audio language resets to the one which has been
selected in the setup mode, every time the power is
turned on or discs are replaced. If that language is
not available on a disc, a language defined by the
disc is selected.
Note
¡Zooming function does not work while operation
display screen is shown.
¡The screen display will disappear after about 5
seconds.
– 26 –
EN
0C28
TD251EN 01.5.31 7:15 PM Page 27
CHANGING THE SUBTITLE
LANGUAGE
CHANGING THE CAMERA
ANGLE (Multi-Angle Pictures)
DVD
The DVD player has a function which allows you to
select the desired language for subtitles.
Press the SUBTITLE button during playback, and
then press the SUBTITLE button to select the
desired subtitle language.
DVD
The DVD player has a function which allows you to
select the desired camera angle.
1 Press the ANGLE button during playback.
¡If the disc contains sequences recorded from differ-
ent camera angles, the angle icon (
) will appear
at the top-right of the screen. You can change the
camera angle when the icon appears on the screen.
¡The subtitle language can be changed if the subtitles
are recorded in multiple languages on the DVD
being played.
¡The subtitle language cannot be changed if the
subtitles are recorded in a single language on the
DVD being played.
¡The camera angle cannot be changed if the disc does
not contain sequences recorded from different
camera angles.
Subtitle 1 , English / 8
Subtitle 1
2 Press the ANGLE button while the angle
number is shown on the screen.
Subtitle 2 , French / 8
Subtitle 2
Angle 1 / 8
Angle 1
Angle 2 / 8
Angle 2
Subtitle Off
No subtitles
Angle 8 / 8
HELLO
Bonjour
¡Pressing the SUBTITLE button cycles the subtitle
language from SUBTITLE 1, SUBTITLE 2 and all
the languages recorded through to off.
Angle 8
Note
¡The screen display will disappear after about 5
seconds.
Notes
¡Some discs allow subtitle language setting on the
disc menu. (Operation varies between discs, so refer
to the manual accompanying the disc.)
¡If the desired language is not shown after pressing
the SUBTITLE button several times, the disc does
not have subtitles in that language.
¡The subtitle language resets to the one which has
been selected in the setup mode, every time the
power is turned on or discs are replaced. If that
language is not available on a disc, a language
defined by the disc is selected.
¡It may take time to display the subtitles in the
selected language.
¡The screen display will disappear after about 5
seconds.
¡When “Subtitle Not Available” appears onscreen, it
means no subtitle is recorded on the scene.
– 27 –
EN
0C28
TD251EN 01.5.31 7:15 PM Page 28
CHANGING THE ON-SCREEN
DISPLAY
DVD
For DVDs
Kind of disc in playbacking
Current playback status
Current repeat status
Current title number
Current chapter number
Elapsed time of the current title and
Remaining time of the current title.
CD
You can check the information about the disc by
pressing the DISPLAY button on the remote control.
For audio CDs and DVDs
Picture in play back
• Chapter
Title
Time
Audio
18 / 30
1/ 5
1:56:38
1.English / 4
Playback Setup Window (DVD)
Press the DISPLAY button, the display appears on the
screen.
ITEM
Title
Time
Total time of the current title
Audio
Audio No., audio language / the number
of available audio languages in the disc
Subtitle
Subtitle No., subtitle language / the
number of available subtitle languages in
the disc
Off : Subtitle is not displays.
Not Available : Subtitle is not included.
Angle
Angle No. / total number of the angles
1/1 : Multi angle is not included in the
disc.
Marker
Place the cursor and press the ENTER
button to activate the Marker function.
[Set the marker]
Using K/ L button, position the cursor on
to the marker number shown as “Not
Set”. Press the ENTER button when the
screen to be reviewed appears.
Up to 5 points can be marked.
[Call back the marker]
Using K/ L button, position the cursor on
to the marker number to be called back
and press the ENTER button.
[Clear the marker]
Using K/ L button, position the cursor on
to the marker number to be cleared and
press the CLEAR button.
To clear all markers, place the cursor on
“All Clear Markers” and press the
ENTER button.
SRS
TruSurround
The current setting (On/Off) is displayed.
2
For the selecting the item of the Playback Setup
Window, press the K/ L button to select the item,
then press the ENTER button.
For audio CDs
Kind of disc in playbacking
Current playback status
Current repeat status
Current track number
Nomal playback
Programedplayback
Random playback
[Track]
Elapsed time of the current track and
Remaining time of the current track.
[All]
Elapsed time of the current disc and
Remaining time of the current disc.
Audio CD
Play
Repeat
[Track]
01 02 03 04 05 06 07 08 09 10
11 12
Track
2
Play Mode
Normal
Time
[Track]
0:01:46
-0:03:27
Track
Time
Maker
Time Display
2 / 12
0:05:13
...
Track
Info. Window
Playback Setup Window
Playback Setup Window (CD)
DISPLAY CONTENTS
Current track number / the number of
total tracks
Time
Total time of the current track
Marker
Place the cursor and press the ENTER
button to activate the Marker function.
[Set the marker]
Using K/ L button, position the cursor on
to the marker number shown as “Not
Set”. Press the ENTER button when the
screen to be reviewed appears.
Up to 5 points can be marked.
[Call back the marker]
Using K/ L button, position the cursor on
to the marker number to be called back
and press the ENTER button.
[Clear the marker]
Using K/ L button, position the cursor on
to the marker number to be cleared and
press the CLEAR button.
To clear all markers, place the cursor on
“All Clear Markers” and press the
ENTER button.
DISPLAY CONTENTS
Current chapter number / the number of
total chapters
Current title number / the number of total
titles
Chapter
Track
Title
1
Chapter
18
Time
0:17:52
-1:38:46
Bit Rate
Info. Window
Playback Setup Window
1
ITEM
DVD
Play
Repeat
[Chapter]
To exit the display (DVD and CD):
Press the RETURN button.
In the playback Setup Window, press the RETURN button to
change the present indication to the former one.
time informations displays on the left
Time Display The
side of the screen (Track/All)
– 28 –
EN
0C28
TD251EN 01.5.31 7:15 PM Page 29
CHANGING THE SETUP ITEMS
Note
4 Press the K/L buttons to select a desired
¡When you change the setup items, press the STOP
button if you are in playback mode.
item, and then press the ENTER button.
¡If Other is selected on the Audio, Subtitle or Disc
Menu setting screen, the Language Code setting
screen will appear. Press the numeric buttons to
enter the desired language code while referring to
the list on page 25.
LANGUAGE SETTINGS
1 Press the SETUP button.
Language
¡The setup screen appears.
Language
Display
Language Controls
Audio
English
Subtitle
English
Disc Menu
English
Player Menu
English
Display
Audio
Audio
Parental
Select :
Cancel :
/
Set : ENTER
Exit : SETUP
Parental
2 Press the K/L buttons to select Language,
and then press the ENTER button.
Language
Audio
Irish
o
Portuguese
Dutch
_.......
Other
Select :
Cancel :
/
Set : ENTER
Exit : SETUP
5 Press the SETUP button.
¡The setup mode will be canceled and the ordinary
screen will appear.
Language Controls
Audio
English
Subtitle
English
Disc Menu
English
Player Menu
English
Display
Note
Audio
Parental
Select :
Cancel :
/
Set : ENTER
Exit : SETUP
¡Language Setting for Audio and Subtitle is not avail-
able with some discs. Then use the Audio and
Subtitle button. Details are on pages 18 and 19.
3 Press the K/L buttons to select an item, and
then press the ENTER button.
Language
Language Controls
Audio
English
Subtitle
English
Disc Menu
English
Player Menu
English
Display
Audio
Parental
Language
Audio
Original
English
French
Spanish
Select :
Cancel :
o
p
/
Set : ENTER
Exit : SETUP
Language Controls
Audio
English
Subtitle
English
Disc Menu
English
Player Menu
English
Display
Audio
Parental
Language
Subtitle
Off
English
Spanish
French
Select :
Cancel :
Parental
p
/
Set : ENTER
Exit : SETUP
Language Controls
Audio
English
Subtitle
English
Disc Menu
English
Player Menu
English
Language
Disc Menus
Original
English
French
Spanish
Select :
Cancel :
/
Parental
p
Set : ENTER
Exit : SETUP
Language Controls
Audio
English
Subtitle
English
Disc Menu
English
Player Menu
English
Player Menu
English
Français
Español
Select :
Cancel :
/
(The disc menu appears in selected language.)
o
Display
Audio
(Subtitles are shown in selected
language.)
o
Display
Audio
(Voice is played back in selected
language.)
(The on-screen display appears in
selected language.)
Set : ENTER
Exit : SETUP
– 29 –
EN
0C28
TD251EN 01.5.31 7:15 PM Page 30
DISPLAY SETTINGS
4 Press the K/L buttons to select a desired
item, and then press the ENTER button.
1 Press the SETUP button.
Language
¡The setup screen will appear.
Display
5 Press the SETUP button.
Audio
Parental
Select :
Cancel :
/
Set : ENTER
Exit : SETUP
¡The setup mode will be canceled and the ordinary
screen will appear.
2 Press the K/L buttons to select Display and
then press the ENTER button.
Language
Display Controls
TV Aspect
4:3 Pan & Scan
On Screen Info On
Panel Display Bright
Angle Icon
On
p
Display
Audio
Parental
Select :
Cancel :
/
Set : ENTER
Exit : SETUP
3 Press the K/L buttons to select an item, and
then press the ENTER button.
Language
Display Controls
TV Aspect
4:3 Pan & Scan
On Screen Info On
Angle Icon
On
Background Color Gray
Display
Audio
Parental
TV Aspect
4:3 Pan & Scan
4:3 Letterbox
Select :
Cancel :
/
Set : ENTER
Exit : SETUP
TV Aspect
(Default : 4:3 Pan & Scan)
4:3 Pan & Scan : Full height picture,
trimmed both sides
4:3 Letter Box : Wide screen with
black bars on top and bottom
Notes
• Some discs do not contain pan and scan images.
• Some discs do not contain letter box images.
Language
Display Controls
TV Aspect
4:3 Pan & Scan
On Screen Info On
Angle Icon
On
Background Color Gray
p
Display
On Screen Info (Default : On)
Display or not display the disc status
(Example “PLAYB”).
Audio
Parental
Language
Select :
Cancel :
/
Set : ENTER
Exit : SETUP
Display Controls
TV Aspect
4:3 Pan & Scan
On Screen Info On
Angle Icon
On
Background Color Gray
p
Display
Audio
Parental
Language
Select :
Cancel :
/
Angle Icon (Default : On)
Display or not display the Angle icon
on the screen.
Set : ENTER
Exit : SETUP
Display Controls
On Screen Info On
Angle Icon
On
Background Color Gray
Auto Power Off On
o
Display
Background Color (Default : Gray)
Select gray or blue
Audio
Parental
Language
Select :
Cancel :
/
Set : ENTER
Exit : SETUP
Display Controls
On Screen Info
On
Angle Icon
On
Background Color Blue
Auto Power Off
On
o
Display
Audio
Parental
Select :
Cancel :
/
Auto Power Off (Default : On)
Set or not set to turn off after the
screen saver is started and no keys are
pressed for 30 minutes..
Set : ENTER
Exit : SETUP
– 30 –
EN
0C28
TD251EN 01.5.31 7:15 PM Page 31
AUDIO SETTINGS
Language
Audio Controls
Digital Audio Out ...
Dynamic Range On
Downmix Mode Dolby Surround
Down Sampling 48kHz
Display
1 Press the SETUP button.
Audio
Parental
Language
¡The setup screen will appear.
Select :
Cancel :
/
Set : ENTER
Exit : SETUP
Display
Down Sampling (Default :
48kHz)
Set the output for the DVD
recorded in PCM 96kHz (96kHz
or 48kHz)
Audio
Parental
Select :
Cancel :
/
Set : ENTER
Exit : SETUP
4 Press the K/L buttons to select a desired
2 Press the K/L buttons to select Audio and
then press the ENTER button.
Language
item, and then press the ENTER button.
¡If PCM, Dolby Digital or DTS MPEG is selected on
the Digital Audio Out setting screen, press the K/L
buttons again to select a further item, and then press
the ENTER button.
Audio Controls
Digital Audio Out
...
Dynamic Range On
Downmix Mode Dolby Surround
Down Sampling 48kHz
Display
Audio
Parental
Select :
Cancel :
/
Set : ENTER
Exit : SETUP
Language
Audio Controls
Digital Audio Out ...
Dynamic Range On
Downmix Mode Dolby Surround
Down Sampling 48kHz
Display
Audio
3 Press the K/L buttons to select an item, and
Parental
then press the ENTER button.
Language
Audio Controls
Digital Audio Out ...
Dynamic Range On
Downmix Mode Dolby Surround
Down Sampling 48kHz
Display
Audio
Parental
Language
Digital audio out setting (Next
step)
Language
Digital Audio Out
Dolby Digital Off
DTS
On
MPEG
Off
Display
Select :
Cancel :
Parental
/
Audio
Set : ENTER
Exit : SETUP
Audio Controls
Digital Audio Out ...
Dynamic Range On
Downmix Mode Dolby Surround
Down Sampling 48kHz
Dynamic Range (Default : Off)
On : Dynamic range is available
Language
Display
Select :
Cancel :
/
Set : ENTER
Exit : SETUP
Audio Controls
Digital Audio Out
...
Dynamic Range On
Downmix Mode Dolby Surround
Down Sampling 48kHz
Digital Audio Out
Dolby Digital Off
DTS
On
MPEG
Off
Select :
Cancel :
/
Set : ENTER
Exit : SETUP
Audio Controls
Digital Audio Out
...
Dynamic Range On
Downmix Mode Dolby Surround
Down Sampling 48kHz
Display
¡This function is for controlling
Audio
Parental
Digital Audio Out
Dolby Digital Off
DTS
On
MPEG
Off
SSelect :
Cancel :
/
Set : ENTER
Exit : SETUP
the range of sound volume. By
compressing the range of sound
volume, it is possible not only to
suppress the output of loud
sound at night and but also to
raise the volume of low sound.
Audio
Parental
Digital Audio Out
Dolby Digital Off
DTS
On
MPEG
Off
Select :
Cancel :
/
Dolby Digital (Default : Off)
On : Output by Dolby Digital.
Set to On when the unit is connected to Dolby Digital Decoder.
Set : ENTER
Exit : SETUP
DTS (Default : Off)
On : Output DTS sound
Set to On when the unit is connected to DTS Decoder.
MPEG (Default : Off)
On : Output by MPEG
Off : Convert the MPEG to PCM
Set to On when the unit is connected to MPEG2 Decoder.
5 Press the SETUP button.
¡The setup mode will be canceled and the ordinary
¡However, this function is effec-
screen will appear.
tive only for the sound recorded
by Dolby Digital recording.
When the sound recorded by
Dolby Digital 5.1ch is outputted,
the sound is compressed automatically even with this function
being set at “Off”.
Language
Audio Controls
Digital Audio Out ...
Dynamic Range On
Downmix Mode Dolby Surround
Down Sampling 48kHz
Display
Audio
Parental
Select :
Cancel :
/
Set : ENTER
Exit : SETUP
Downmix Mode
(Default : Dolby Surround)
Dolby Surround: When the player
is connected to an audio component that conforms to
Dolby Surround Pro Logic
STEREO: When the player is connected to a normal audio component
– 31 –
EN
0C28
TD251EN 01.5.31 7:15 PM Page 32
CONTROL LEVELS
PARENTAL LOCK
¡Level 8
DVD software of any grade (adult/general/children)
can be played back.
1 Press the SETUP button.
Language
¡The setup screen will appear.
Display
¡Levels 7 to 2
Audio
Parental
Select :
Cancel :
/
Only DVD software intended for general use and
children can be played back.
Set : ENTER
Exit : SETUP
2 Press the K/L buttons to select Parental,
¡Level 1
Only DVD software intended for children can be
played back, with those intended for adult and
general use prohibited.
and then press the ENTER button.
Language
Display
Password
Enter current password...
Notes
Audio
____
Parental
Select :
Cancel :
/
Set : ENTER
Exit : SETUP
¡With some DVDs, it may be difficult to find if they
are compatible with parental lock. Be sure to check
if the parental lock function operates in the way that
you have set.
3 Press the numeric buttons to enter the 4digit password, and then press the ENTER
button.
¡Record the password in case you forget it.
¡When doing this for the first time, enter any 4 digits.
That number will be used as the password from the
second time onward.
¡By entering the password, you
can then change the control level
and password settings.
Language
Parental Contorols
Parental Level
7[NC-17]
Change
Display
Audio
Parental
Select :
Cancel :
/
Set : ENTER
Exit : SETUP
4 Press the K/L buttons to select an item, and
IF YOU FORGET THE PASSWORD
1) Open the tray.
2) Press the 1, 2, 3, 4, then DISPLAY button on the
remote control. the default setup screen will appear.
Then, press the ENTER button.
3) Disconnect the power once and reconnect, then
proceed the step 1 to 4 of the PARENTAL LOCK
again.
then press the ENTER button.
When Parental Level is selected
¡Press the K/L buttons to select an item from 8 to 1
Note: If you proceed the above steps, ALL the
settings of the DVD player will be cleared. To use
the DVD player under the previous settings, set
each setting item all over again.
and then press the ENTER button.
¡When Change is selected, press the numeric buttons
to enter the four digits password. Then press the
ENTER button.
Language
Parental Contorols
Parental Level
7[NC-17]
Change
Display
Audio
Parental
Language
Parental Level
5
o
4 [PG-13]
3 [PG]
2
p
Select :
Cancel :
/
Set : ENTER
Exit : SETUP
Parental Contorols
Parental Level
7[NC-17]
Change
Display
Password
Enter current password
Audio
____
Parental
Select :
Cancel :
/
Set : ENTER
Exit : SETUP
5 Press the RETURN button.
¡The setup screen will appear.
– 32 –
EN
0C28
TD251EN 01.5.31 7:15 PM Page 33
LANGUAGE CODE LIST
DVD
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
Language
Afar
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali;Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
German (GER)
Bhutani
Greek
English (ENG)
Esperanto
Spanish (SPA)
Estonian
Basque
Persian
Finnish
Fiji
Faroese
French (FRE)
Frisian
Irish
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
Icelandic
Italian (ITA)
Hebrew
Japanese (JPN)
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean (KOR)
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laothian
Lithuanian
Country code
4747
4748
4752
4759
4764
4765
4771
4772
4847
4851
4853
4854
4855
4860
4861
4864
4947
4961
4965
4971
5047
5051
5072
5158
5160
5161
5165
5166
5167
5247
5255
5256
5261
5264
5271
5347
5350
5358
5360
5367
5447
5455
5464
5467
5471
5547
5551
5557
5560
5565
5566
5569
5647
5655
5669
5747
5757
5758
5759
5760
5761
5765
5767
5771
5847
5860
5861
5866
No.
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
– 33 –
Language
Latvian;Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay
Maltese
Burmese
Nauru
Nepali
Dutch (DUT)
Norwegian
Occitan
(Afan)Oromo
Oriya
Panjabi
Polish
Pashto;Pushto
Portuguese
Quechua
Rhaeto-Romance
Kirundi
Romanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sangho
Serbo-Croatian
Singhalese
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Siswat
Sesotho
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Wolof
Xhosa
Yoruba
Chinese (CHI)
Zulu
Country code
5868
5953
5955
5957
5958
5960
5961
5964
5965
5966
5971
6047
6051
6058
6061
6149
6159
6164
6247
6258
6265
6266
6367
6459
6460
6461
6467
6469
6547
6550
6553
6554
6555
6557
6558
6559
6560
6561
6563
6564
6565
6566
6567
6568
6569
6647
6652
6653
6654
6655
6657
6658
6660
6661
6664
6665
6666
6669
6757
6764
6772
6855
6861
6961
7054
7161
7254
7267
EN
0C28
TD251EN 01.5.31 7:15 PM Page 34
TROUBLESHOOTING GUIDE
TV
Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked
possibilities. Before arranging for service, check these items. It could save your time and money.
Problem
Remote Control Doesn’t Work
Bars On Screen
Picture Distorted or Blurred
Picture Rolls Vertically
Lines or Streaks in Picture
No Color
Poor Reception on Some Channels
Ghosts in Picture
Weak Picture
Sound OK, Picture Poor
Picture OK, Sound Poor
No Picture or Sound
Corrective Action
• Is TV/DVD plugged in?
• Power at outlet?
• Check batteries in Remote Control.
• If outside antenna is being used, check for broken wire.
• Check for local interference.
• Try a new channel, if OK, then possible station trouble.
• If outside antenna is being used, check for broken wire.
• Try a new channel, if OK, then possible station trouble.
• If outside antenna is being used, check for broken wire.
• Check for local interference.
• Try a new channel, if OK, then possible station trouble.
• Is antenna connected to terminal on the back of the set?
• If outside antenna is being used, check for broken wire.
• Adjust COLOR control.
• Try a new channel, if OK, then possible station trouble.
• Is antenna connected to terminal on the back of the set?
• If outside antenna is being used, check for broken wire.
• Check for local interference.
• Try a new channel, if OK, then possible station trouble.
• Is antenna connected to terminal on the back of the set?
• If outside antenna is being used, check for broken wire.
• Adjust CONTRAST & BRIGHT control.
• Try a new channel, if OK, then possible station trouble.
• Is antenna connected to terminal on the back of the set?
• If outside antenna is being used, check for broken wire.
• Check for local interference.
• Adjust CONTRAST & BRIGHT control.
• Try a new channel, if OK, then possible station trouble.
• Check for local interference.
• Try a new channel, if OK, then possible station trouble.
• Is TV/DVD plugged in?
• Power at outlet?
• Is TV/DVD’S POWER button on?
• Is antenna connected to terminal on the back of the set?
• If outside antenna is being used, check for broken wire.
• Turn off with POWER button and then turn it on after about a minute.
– 34 –
EN
0C28
TD251EN 01.5.31 7:15 PM Page 35
Closed Caption Problem
My TV is showing captions
that are misspelled.
Possible Remedy
• You are watching a live broadcast and spelling errors made by the
• closed captioning production company may pass through uncorrected.
• A prerecorded program will not show any misspelled words because
• of the normal time available for editing the captions.
My TV will not show the text
• Captions that are delayed a few seconds behind the actual dialogue
in its entirety or there is a delay of • are common for live broadcast. Most captioning production companies
what is being said.
• can display a dialogue to a maximum of 220 words per minute. If a
• dialogue exceeds that rate, selective editing is used to insure that the
• captions remain up-to-date with the current TV screen dialogue.
My captions are scrambled with
• Interference caused by building, power lines, thunderstorms, etc.
white boxes on the TV screen.
• may cause scrambled or incomplete captions to appear.
My program guide listed a TV show • Broadcasters may at times use a time compression process to the
as being closed captioned but none • actual program so that additional advertising time can be given.
of the captions were displayed.
• Since the decoder cannot read the compressed information,
• captions will be lost.
My TV screen shows a black box
• You are in the TEXT mode. Select CAPTION mode or CAPTION
on certain channels.
• [OFF].
– 35 –
EN
0C28
TD251EN 01.5.31 7:15 PM Page 36
DVD
If the TV/DVD does not perform properly when operated as instructed in this Owner’s Manual, check the
player, consulting the following checklist.
Symptom
No power.
let.
The player does not
respond to the
remote control.
No picture
Cause
Remedy
• Loose power plug.
• Insert the power plug firmly into the wall out-
• The remote control is not aimed
• at the sensor on the TV/DVD.
• Obstacles present between the
• remote control and the sensor.
• The remote control is too far
• away from the TV/DVD.
• Dead batteries.
• Loose video connection.
• Wrong disc.
• Aim the remote control directly at the sensor
• on the TV/DVD.
• Remove the obstacles from the signal path.
Disc cannot be
played
• No disc.
• Dirty disc.
• Disc is placed upside down.
• Parental lock is active.
No sound
• Loose audio connection.
• The power of the connected
• audio component is off.
• Wrong audio output settings.
• Wrong input settings on the
• connected audio component.
• Immediately after playing,
• press fast forward or in reverse.
Distorted picture
Audio or subtitle
language does not
match the setup.
The camera angle
cannot be changed.
Audio or subtitle
language cannot be
changed.
"Prohibited icon"
appears on the
screen, prohibiting
an operation.
CD sound dropout
No CD reproduction
DVD picture dropout
DVD picture freeze
DVD picture in mosaic
No DVD reproduction
• Use the remote control within 7m of
• the TV/DVD.
• Replace the batteries.
• Connect the video cables firmly.
• Insert a correct video disc that plays on this
• TV/DVD.
• Insert a disc.
• Clean the disc.
• Place the disc correctly, with the label side up.
• Cancel the parental lock or change the control
• level.
• Connect the audio cables firmly.
• Turn the power of the audio component on.
• Correct the audio output settings.
• Correct the input settings on the audio
• component.
• There are some cases where pictures may be
• slightly distorted, which are not a sign of a
• malfunction.
• No malfunction.
• The selected language is not
• available for audio or subtitles
• on the DVD.
• The DVD does not contain
• No malfunction.
• sequences recorded from
• different camera angles.
• The DVD does not contain
• No malfunction.
• audio source or subtitles in the
• selected language.
• That operation is prohibited by • No malfunction.
• the TV/DVD or disc.
• Scratched disc
• Replace the disc with unscratched one.
NOTES:
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in
this Owner’s Manual for details on correct operations.
• Playback from a desired track and random playback are not available during program playback.
– 36 –
EN
0C28
TD251EN 01.5.31 7:15 PM Page 37
MAINTENANCE
CABINET CLEANING
SERVICING
• Wipe the front panel and other exterior surfaces of
• Should your TV/DVD become inoperative, do not
•
the TV/DVD with a soft cloth immersed in lukewarm water and wrung dry.
Never use a solvent or alcohol. Do not spray insecticide liquid near the TV/DVD. Such chemicals
may cause damage and discoloration to the
exposed surfaces.
try to correct the problem by yourself. There are no
user-serviceable parts inside. Turn off, unplug the
power cord, and please call our help line at 1-800256-2487, to locate an Authorized Service Center.
IF THE LASER OPTICAL PICKUP UNIT IS DIRTY
• If the player still does not perform properly when it is operated while referring to the relevant sections and to
"TROUBLESHOOTING GUIDE" in this Owner's Manual, the laser optical pickup unit may be dirty. Consult
your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.
DISC HANDLING
• Use discs which have the following logos on them.
(Optical audio digital discs.)
• To clean-off, use a soft cloth.
• Do not use a hard cloth since this will mar the disc.
• Wipe the disc in a straight line from center to edge.
• Never wipe with a circular motion.
• Do not use detergent or abrasive cleaning agents.
• Handle the discs so that fingerprints and dust do
not adhere to the surfaces of the discs.
• Always store the disc in its protective case when it
is not used.
– 37 –
EN
0C28
TD251EN 01.5.31 7:15 PM Page 38
SPECIFICATIONS
GENERAL SPECIFICATIONS
Sound output:
TV
Television system:
NTSC-M
TV Standard
Closed caption system: §15.119/FCC
Channel coverage:
VHF:
2 ~ 13
UHF:
14 ~ 69
CATV:
2 ~13, A ~ W,
W+1 ~ W+84,
A-5 ~ A-1, 5A
Tuning System:
181 channel
frequency synthesized
tuning system
Channel access:
Direct access keyboard,
programmable
scan and up/down
DVD
Product type:
Discs:
Output signal format:
Frequency response
(out put jack)
DVD (linear sound):
ELECTRICAL SPECIFICATIONS
DVD Player
DVD video, Audio CD
NTSC color
20 Hz to 22 kHz
(sample rate: 48 kHz)
20 Hz to 44 kHz
(sample rate: 96 kHz)
20 Hz to 20 kHz
CD:
Signal-to-noise ratio
(S/N ratio)(out put jack)
CD:
100 dB (EIAJ)
Dynamic range
(out put jack)
DVD (linear sound): 85 dB
CD:
84 dB (EIAJ)
Total distortion factor
CD:
0.07% (EIAJ)
Wow and flutter:
Below the measurement
limitation (+/-0.001%
W PEAK) (EIAJ)
2 speakers, 1W, 8 ohm
OTHER SPECIFICATIONS
Terminals
Antenna input:
Video input:
Audio L/R input:
Headphone:
Coaxial digital
audio output
(only DVD):
VHF/UHF/CATV
75 ohm unbalanced (F-type)
RCA connector [ 1
RCA connector [ 2
1/8” stereo (3.5 mm)
One pin jack,
500m Vpp (75 ohm)
Analog audio L/R
output (only DVD): RCA connector [ 2
Remote control:
Digital encoded
infrared light system
Operating
temperature:
5ºC to 40ºC
(41ºF~104ºF)
Power requirements: AC 120V, 60Hz
Power consumption
(Maximum):
90W
Picture tube:
19"
Dimensions:
H:19-5/8” (498mm)
W:19-3/16” (487mm)
D:18-21/32” (474mm)
Weight:
41.9 lbs (19kg)
Accessories:
Remote Control Unit with
2"AA"batteries
Owner’s Manual
• Designs and specifications are subject to change without notice and without our legal obligation.
• If there is a discrepancy between languages, the default language will be English.
– 38 –
EN
0C28
TD250UAES 01.5.31 7:14 PM Page 39
INDICE
■ CONTROLES DE OPERACIÓN Y FUNCIONES . . . . . 39
PANEL FRONTAL DEL TELEVISOR/DVD. . . . . . . . . . 39
MANDO A DISTANCIA . . . . . . . . . . . . . . . . . . . . . . . . . 39
VISTA POSTERIOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
■ PREPARACIÓN PARA LA UTILIZACIÓN . . . . . . . . . . 40
CONEXIONES DE ANTENA/TELEVISIÓN
POR CABLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
INSTALACIÓN DE LAS PILAS. . . . . . . . . . . . . . . . . . . 41
CONEXIÓN A TOMAS DE ENTRADA EXTERNA. . . . 41
CONEXIÓN A UN SISTEMA ESTÉREO (Para DVD) . . 41
CONEXIÓN A UN AMPLIFICADOR EQUIPADO CON
TOMAS DE ENTRADA DIGITAL, PLATINA MD O
PLATINA DAT (Para DVD) . . . . . . . . . . . . . . . . . . . . . . 41
CONEXIÓN A UN DECODIFICADOR DOLBY DIGITAL
O A UN DECODIFICADOR DTS (Para DVD) . . . . . . . . 41
TV SECTION
■ PREPARACIÓN PARA LA UTILIZACIÓN . . . . . . . . . . . . 42
SELECCIÓN DE IDIOMA . . . . . . . . . . . . . . . . . . . . . . . 42
PREAJUSTE DE CANALES. . . . . . . . . . . . . . . . . . . . . . 42
DVD SECTION
■ REPRODUCCIÓN DE UN DISCO . . . . . . . . . . . . . . . . 43
REPRODUCCIÓN DE UN DVD DE VÍDEO O UN CD DE
AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
CONTROLES DE
OPERACIÓN Y FUNCIONES
7. Ventanilla del sensor del mando a distancia
8. Botón STOP
Detiene la operación del disco.
9. Botón REV
Reproduce rápidamente hacia atrás hasta un
punto deseado.
10. Botón PLAY
Inicia la reproducción del contenido del disco.
Púlselo para cambiar a un modo de DVD cuando
modo de televisor.
11. Botón FWD
Reproduce rápidamente hacia adelante hasta un
punto deseado.
12. Botón PAUSE
Hace una pausa en la operación del disco.
13. Botón OPEN/CLOSE
Púlselo para insertar discos en la bandeja o
retirarlos de ella.
14. Toma HEADPHONE
Para conectar auriculares (no suministrados) y
escuchar en privado.
15. Botón MODE
Activa el modo de reproducción programada o el
modo de reproducción aleatoria.
16. Botones de números
Modo del televisor:
Pulse dos dígitos para tener acceso directamente
al canal deseado.
Recuerde pulsar "0" antes de elegir un canal de
un solo dígito.
PANEL FRONTAL DEL
TELEVISOR/DVD
Botón +100
Púlselo para seleccionar canales de televisión por
cable cuyo número sea igual o superior al 100.
Consulte la figura 1 de la página 8
Modo DVD:
MANDO A DISTANCIA
Púlselo para introducir el número deseado.
Botón +10
Consulte la figura 2 de la página 8
Púlselo para introducir los números deseados
cuyo número sea igual o superior al 10.
VISTA POSTERIOR
Consulte la figura 3 de la página 9
1. Bandeja de carga del disco
2. Toma de entrada VIDEO
Conecte aquí la toma de salida de vídeo de una
videocámara o de una videograbadora.
3. Tomas de entrada AUDIO L/R
Conecte aquí las tomas de salida de audio de una
videocámara o de una videograbadora.
4. Botón POWER
Púlselo para conectar y desconectar la alimentación.
5. Botones VOLUME K/L
Púlselos para controlar el nivel del volumen para
el DVD y el televisor.
6. Botones CHANNEL K/L
Púlselo para seleccionar el canal memorizado.
Púlselo para cambiar a un modo de televisor cuando modo de DVD.
17. Botón SLEEP
Pulse el botón SLEEP para visualizar el temporizador para dormir y activar la función. La hora
de apagado puede determinarse por el número de
veces que usted pulsa el botón. (0, 10, 20, 30, 90,
0 minutos)
18. Botones SKIP
Salta capítulos o pistas hasta un punto deseado.
19. Botón ZOOM
Amplia parte de una imagen de DVD reproducida.
20. Botón SETUP
Púlselo para activar o salir del modo de menús de
televisor o preparación de DVD.
21. Botón TITLE
Visualiza el menú de títulos.
22. Botón CLEAR
Repone un ajuste.
23. Botón DISPLAY
– 39 –
ES
0C28
TD250UAES 01.5.31 7:14 PM Page 40
Modo del televisor:
Púlselo para visualizar el número del canal en la
pantalla. Si lo pulsa de nuevo, el número del canal
desaparecerá.
Modo de DVD:
Visualiza el estado actual en la pantalla del televisor con fines de comprobación.
24. Botón SEARCH MODE
Púlselo para localizar un punto deseado.
25. Botón AUDIO
Púlselo para seleccionar un idioma de audio o un
modo de sonido deseado.
26. Botón SUBTITLE
Púlselo para seleccionar un idioma de subtítulos
deseado.
27. Botón REPEAT
Repite la reproducción del disco, título, capítulo o
pista actual.
28. Botón ANGLE
Púlselo para cambiar el ángulo de la cámara y
verde, desde un ángulo diferente, la secuencia que
está siendo reproducida.
29. Botón A-B REPEAT
Repite la reproducción de una sección seleccionada.
30. Botón RETURN
Para volver a la operación anterior.
31. Botón ENTER
Púlselo para establecer un ajuste.
32. Botones de flechas
Modo de televisor:
Púlselo para seleccionar un modo de ajuste desde
el menú que aparece en la pantalla del televisor.
Púlselo para seleccionar o ajustar desde un menú
particular.
Modo de DVD:
Se utiliza cuando se hacen ajustes mientras se
observa la visualización en una pantalla de televisor.
33. Botón DISC MENU
Visualiza menús en el DVD.
34. Botón SELECT
Púlselo para cambiar a un modo de televisor,
modo de entrada externa o modo de DVD.
35. Botón MUTE
Pulse el botón MUTE para apagar el sonido de un
programa de TV. La visualización del nivel del
sonido cambia de ROJO CLARO a AZUL
CLARO.) Pulse de nuevo el botón MUTE o el
botón VOL K o L para restaurar el sonido.
36. Botón PICTURE
Presione para entrar en el modo de ajuste de imagen.
37. Cable de alimentación
Conéctelo a una toma de CA convencional (120
V/60 Hz).
NOTA: Retire el cable de alimentación del gancho
para evitar romperlo antes de conectarlo a
una toma de CA convencional.
38. Toma de salida de audio digital COAXIAL
Conéctela a la entrada digital de un amplificador o
decodificador externo.
39. Toma de salida AUDIO L/R
Conéctela a la entrada de audio analógico de un
amplificador o decodificador externo.
NOTA: Las tomas de entrada de audio (roha y
blanca) en el lado trasero sirven para producir no el son televisor ni el son de
entrada externa, sino el son DVD.
40. Toma de entrada ANT.
Conéctela a una antena, sistema de televisión por
cable o sistema de satélite.
PREPARACIÓN PARA LA
UTILIZACIÓN
CONEXIONES DE ANTENA/
TELEVISIÓN POR CABLE
ANTENA COMBINADA DE VHF/UHF
La antena de varilla de VHF/UHF (no suministrada)
es desmontable. Inserte el vástago de la antena en el
agujero de la parte superior del televisor/DVD.
Conecte la antena de varilla de VHF/UHF o la antena
combinada de VHF/UHF al terminal ANT. del televisor/DVD como se muestra en el diagrama de abajo.
Para obtener la mejor recepción, extienda completamente la antena de varilla de VHF/UHF y haga los
ajustes necesarios. (Evite tocar la sección superior
cuando haga el ajuste.)
NOTA:
Antes de enchufar la antena de varilla en un terminal
de antena, compruebe que la clavija no esté doblada.
Si lo está, enderece la clavija como se muestra en la
ilustración y luego enchufe la clavija en el terminal
de antena.
Consulte la figura 4 de la página 10
NOTA:
La conexión de una antena interior puede que no proporcione siempre una recepción de TV aceptable.
ANTENAS SEPARADAS DE VHF/UHF
En algunas áreas será necesario utilizar una antena
exterior.
– 40 –
Consulte la figura 5 de la página 10
ES
0C28
TD250UAES 01.5.31 7:14 PM Page 41
TELEVISIÓN POR CABLE SIN CAJA DE
CONVERTIDOR/DECODIFICADOR
CONEXIÓN A UN SISTEMA
ESTÉREO (Para DVD)
Utilice esta conexión si su sistema de televisión por
cable se conecta directamente a su televisor/DVD sin
necesidad de caja de convertidor.
Consulte la figura 6 de la página 11
TELEVISIÓN POR CABLE CON CAJA
DE CONVERTIDOR/DECODIFICADOR
O CAJA DE SATÉLITE
Si su proveedor de servicios de televisión por cable le
suministra una caja de convertidor o si usted utiliza
un sistema de satélite, podrá utilizar la conexión básica mostrada aquí.
Consulte la figura 7 de la página 11
Consulte la figura 9 de la página 13
NOTAS:
• Asegúrese de desconectar la alimentación a todos
los componentes del sistema antes de hacer la
conexión a otro componente.
• Consulte el manual del propietario de su sistema
estéreo y de cualquier otro componente que vaya a
conectar al televisor/DVD.
• Las tomas de entrada de audio (roha y blanca) en el
lado trasero sirven para producir no el son televisor
ni el son de entrada externa, sino el son DVD.
CONEXIÓN A UN
AMPLIFICADOR EQUIPADO
CON TOMAS DE ENTRADA
DIGITAL, PLATINA MD O
PLATINA DAT (Para DVD)
INSTALACIÓN DE LAS PILAS
1) Abra la tapa del compartimiento de las pilas del
mando a distancia presionándola en el sentido de
la flecha.
2) Inserte 2 pilas tamaño "AA" en su compartimiento
colocando las polaridades (+/-) en sus posiciones
correspondientes.
3) Vuelva a poner la tapa.
CONEXIÓN A TOMAS DE
ENTRADA EXTERNA
Cuando vea un programa grabado en otra fuente
(videograbadora o videocámara), utilice las tomas de
entrada de audio/vídeo de la parte delantera del televisor/DVD.
Conecte las tomas de salida de audio/vídeo de otra
fuente a las tomas AUDIO L/R y VIDEO de este televisor/DVD. Y luego pulse el botón SELECT hasta
que "VIDEO" aparezca en la pantalla.
NOTA:
• Cuando conecte una videograbadora monoaural
(otra fuente) a este televisor/DVD, conecte la toma
de salida de audio de la videograbadora monoaural
(otra fuente) a la toma AUDIO L de este televisor/DVD. El audio saldrá igualmente en los canales
L y R.
Utilice un cable digital coaxial (de venta en el comercio) para las conexiones de audio.
Consulte la figura 10 de la página 13
NOTAS:
• La fuente de audio de un disco del formato de
sonido ambiental Dolby Digital de 5,1 canales no
puede ser grabada como sonido digital por una
platina MD o DAT.
• Asegúrese de desconectar la alimentación de todos
los componentes del sistema antes de hacer la
conexión a otro componente.
• Consulte los manuales del propietario de los componentes que vaya a conectar al televisor/DVD.
• Ponga DOLBY DIGITAL y DTS en OFF para la
salida de audio en el modo de preparación. La
reproducción en el televisor/DVD utilizando los
ajustes incorrectos puede generar distorsión de
ruido, y también puede estropear los altavoces.
• El audio se silenciará cuando DOLBY DIGITAL se
ponga en OFF y VIRTUAL 3D se ponga en ON
para la salida de audio en el modo de preparación y
usted seleccione la fuente de audio del formato de
sonido ambiental Dolby Digital de 5,1 canales.
Consulte la figura 8 de la página 12
Conexiones de antena/televisión por cable
Continúa en la página siguiente.
– 41 –
ES
0C28
TD250UAES 01.5.31 7:14 PM Page 42
CONEXIÓN A UN
DECODIFICADOR DOLBY
DIGITAL O A UN
DECODIFICADOR DTS
(Para DVD)
TV SECTION
PREPARACIÓN PARA LA
UTILIZACIÓN
Si se utiliza este televisor/DVD para reproducir
fuentes del formato de sonido ambiental Dolby
Digital de 5,1 canales o de sonido ambiental DTS, el
televisor/DVD dará salida a un flujo de datos Dolby
Digital o DTS desde su toma de salida de audio digital COAXIAL. Conectando el reproductor a un
decodificador Dolby Digital o DTS, usted podrá disfrutar de un ambiente más convincente y real con un
sonido ambiental potente y de alta calidad de tipo
profesional tal como el que se oye en salas de cine.
Utilice cables digitales coaxiales (de venta en el comercio) para las conexiones de audio.
Para empezar
1
Conecte el cable de alimentación a una toma de CA
convencional.
NOTA: Si aparecen algunos dígitos en la esquina de
la pantalla, pulse el botón POWER sin desenchufar el cable de alimentación.
2
Pulse el botón POWER para encender el
televisor/DVD.
3
Consulte la figura 11 de la página 14
NOTAS:
• Asegúrese de desconectar la alimentación de todos
los componentes del sistema antes de hacer la
conexión a otro componente.
• Consulte los manuales del propietario de los componentes que vaya a conectar al televisor/DVD.
• Si conecta un decodificador Dolby Digital, ponga
DOLBY DIGITAL en ON para la salida de audio
en el modo de preparación.
• Si conecta un decodificador DTS, ponga DTS en
ON para la salida de audio en el modo de
preparación.
• A menos que se haga la conexión a un decodificador Dolby Digital o DTS, ponga DOLBY DIGITAL y DTS en OFF para la salida de audio en el
modo de preparación. La reproducción en el televisor/DVD utilizando los ajustes incorrectos puede
generar distorsión de ruido, y también puede estropear los altavoces.
• El audio se silenciará cuando DOLBY DIGITAL se
ponga en OFF y VIRTUAL 3D se ponga en ON
para la salida de audio en el modo de preparación y
usted seleccione la fuente de audio del formato de
sonido ambiental Dolby Digital de 5,1 canales.
Fabricado bajo licencia de Dolby
Laboratories. “Dolby” y el símbolo de la D
doble son marcas de fábrica de Dolby
Laboratories. Trabajos confidenciales sin
publicar. ©1992-1997 Dolby Laboratories, Inc.
Todos los derechos reservados.
Pulse el botón SELECT del mando a distancia hasta
que el número del canal o "TV" aparezca en la pantalla. Luego pulse el botón TV.
SELECCIÓN DE IDIOMA
Si desea cambiar el idioma del menú en pantalla, siga
el procedimiento de abajo.
1
Pulse el botón MENU para que la visualización del
menú aparezca en la pantalla del televisor.
2
Pulse el botón de flecha K o L para apuntar a
"LENGUAJE".
3
Seleccione "ENGLISH" (inglés), "ESPAÑOL" o
"FRANÇAIS" (francés) utilizando el botón de flecha
B o s.
4
Pulse el botón MENU para salir del menú.
NOTA: Para el modo del televisor y el modo del
DVD se deberá seleccionar un idioma de
visualización en pantalla.
PREAJUSTE DE CANALES
“DTS” y “DTS Digital Out” son marcas de
fábrica de Digital Theater Systems, Inc.
Para preajustar un canal o cambiar un canal de preajuste, siga el procedimiento de abajo.
ES
– 42 –
0C28
TD250UAES 01.5.31 7:14 PM Page 43
1
DVD SECTION
Pulse el botón MENU para que la visualización del
menú aparezca en la pantalla del televisor.
REPRODUCCIÓN DE UN
DISCO
2
Pulse el botón de flecha K o L para apuntar a
"CANALES PROGRAMADOS". Luego pulse el
botón de flecha B.
REPRODUCCIÓN DE UN DVD
DE VÍDEO O UN CD DE AUDIO
DVD
3
Pulse el botón de flecha K o L para apuntar a
"MEMO AUTOMÁTICA". Luego pulse el botón de
flecha B.
El sintonizador explora y memoriza todos los canales
activos de su zona.
• El televisor distingue entre los canales de TV convencional y los canales de televisión por cable.
• Cuando termine la función AUTO MEMO, el canal
memorizado más bajo vuelve a aparecer en la pantalla.
• Cuando pulse el botón de flecha K o L después de
seleccionar AUTO MEMO, el sintonizador se
detendrá en los canales sin memorizar solamente.
• El televisor puede considerar canales de TV como
canales CATV según las condiciones de la recepción. En este caso, active de nuevo la función
AUTO MEMO en condiciones de recepción fina.
[FUNCIÓN DE ADICIÓN/BORRADO]
1) Pulse el botón MENU para que la visualización
del menú aparezca en la pantalla del televisor.
2) Pulse el botón de flecha K o L para apuntar a
"CANALES PROGRAMADOS". Luego pulse el
botón de flecha B.
3) Pulse el botón de flecha K o L para apuntar a
"AÑADIR/BORRAR". Luego pulse el botón de
flecha B.
4) Utilice el botón de flecha K o L para seleccionar
el canal que desee memorizar o borrar de la
memoria.
•
•
NOTA: La visualización volverá a la pantalla en
unos 10 segundos. Realice la función
"AÑADIR/BORRAR" mientras aparece la
visualización en la pantalla.
Pulse el botón de flecha B o s para encender el
número de canal en AZUL CLARO si usted desea
añadir el canal a la memoria.
Pulse el botón de flecha B o s para encender el
número de canal en ROJO CLARO si usted desea
borrar el canal a la memoria.
CD
Para empezar
Conecte la alimentación del televisor, amplificador y
cualquier otro componente que esté conectado al
reproductor DVD. (Cambie el sistema de entrada para
adaptarlo al reproductor DVD, y compruebe que el
volumen del sonido sea correcto.)
1 Pulse el botón POWER.
¡La alimentación se conectará.
2 Pulse el botón OPEN/CLOSE.
¡La bandeja de carga del disco se abrirá.
3 Ponga un disco en la bandeja.
¡Asegúrese de que el disco esté correctamente asen-
tado en el hueco correcto, con el lado de la etiqueta
hacia arriba.
4 Pulse el botón PLAY.
¡La bandeja se cerrará automáticamente y la repro-
ducción empezará desde el primer capítulo o pista
del disco. Necesitará pulsar el botón PLAY sólo
cuando la bandeja haya sido cerrada pulsando el
botón OPEN/CLOSE.
¡Cuando reproduzca un DVD que tenga grabado un
menú de títulos, el menú tal vez aparezca en la pantalla. En este caso, consulte "UTILIZACIÓN DEL
MENÚ DE TÍTULOS".
5 Pulse el botón STOP para detener la reproducción.
5) Pulse el botón MENU para salir del menú.
– 43 –
ES
0C28
TD251UB_BCV 01.5.31 7:15 PM Page 44
LIMITED WARRANTY
FUNAI CORP. will repair this Emerson product, free of charge in the USA in the event of defect in materials or
workmanship as follows:
DURATION:
PARTS:
FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the
date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this
warranty.
LABOR:
FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date
of original retail purchase.
LIMITS AND EXCLUSIONS:
This warranty is extended only to the original retail purchaser. A purchase receipt or other proof of original retail
purchase will be required together with the product to obtain service under this warranty.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing
or if service was attempted by an unauthorized service center. This FUNAI CORPORATION Limited warranty does
not apply to any product not purchased and used in the United States.
This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It
does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not
supplied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication,
alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this
product or damage which results from fire, flood, lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE
CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY
GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE
USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF
FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY, AND
FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS
REPRESENTATIVES IN THE UNITED STATES.
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY A FUNAI AUTHORIZED
SERVICE CENTER. THIS WARRANTY IS VALID WHEN THE UNIT IS CARRIED-IN TO FUNAI
AUTHORIZED SERVICE FACILITY.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS
THAT VARY FROM STATE TO STATE, IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE
UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI
CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT
WITHOUT PRIOR NOTICE.
To locate your nearest Emerson Authorized Service Center or for general service procedure, please
call 1-800-256-2487 or write to the following:
FUNAI CORPORATION, INC.
Customer Service
100 North Street; Teterboro, NJ 07608
Tel :1-800-256-2487
PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.
Printed in Malaysia
0EMN01819
TD251UB ★★★★