Roland LX-10F Digital Upright Piano Owner`s manual

* 5 1 0 0 0 1 3 6 1 9 0 1 *

Information

AFRICA

EGYPT

Al Fanny Trading Offi ce

9, EBN Hagar Al Askalany Street,

ARD E1 Golf, Heliopolis,

Cairo 11341, EGYPT

TEL: (022)-417-1828

REUNION

MARCEL FO-YAM Sarl

25 Rue Jules Hermann,

Chaudron - BP79 97 491

Ste Clotilde Cedex,

REUNION ISLAND

TEL: (0262) 218-429

SOUTH AFRICA

T.O.M.S. Sound & Music (Pty)Ltd.

2 ASTRON ROAD DENVER

JOHANNESBURG ZA 2195,

SOUTH AFRICA

TEL: (011)417 3400

Paul Bothner(PTY)Ltd.

Royal Cape Park, Unit 24

Londonderry Road, Ottery 7800

Cape Town, SOUTH AFRICA

TEL: (021) 799 4900

ASIA

CHINA

Roland Shanghai Electronics

Co.,Ltd.

5F. No.1500 Pingliang Road

Shanghai 200090, CHINA

TEL: (021) 5580-0800


Co.,Ltd.

(BEIJING OFFICE)

10F. No.18 3 Section Anhuaxili

Chaoyang District Beijing 100011

CHINA

TEL: (010) 6426-5050

HONG KONG

Tom Lee Music

11/F Silvercord Tower 1

30 Canton Rd

Tsimshatsui, Kowloon

Hong Kong

TEL: 825-2737-7688

Parsons Music Ltd.

8th Floor, Railway Plaza, 39

Chatham Road South, T.S.T,

Kowloon, HONG KONG

TEL: 2333 1863

INDIA

Rivera Digitec (India) Pvt. Ltd.

411, Nirman Kendra Mahalaxmi

Flats Compound Off . Dr. Edwin

Moses Road, Mumbai-400011,

INDIA

TEL: (022) 2493 9051

INDONESIA

PT Citra Intirama

Jl. Cideng Timur No. 15J-15O

Jakarta Pusat

INDONESIA

TEL: (021) 6324170

KOREA

Cosmos Corporation

1461-9, Seocho-Dong,

Seocho Ku, Seoul, KOREA

TEL: (02) 3486-8855

MALAYSIA

Roland Asia Pacifi c Sdn. Bhd.

45-1, Block C2, Jalan PJU 1/39,

Dataran Prima, 47301 Petaling

Jaya, Selangor, MALAYSIA

TEL: (03) 7805-3263

VIET NAM

VIET THUONG CORPORATION

386 CACH MANG THANG TAM ST.

DIST.3,

HO CHI MINH CITY

VIET NAM

TEL: (08) 9316540

CENTRAL/LATIN

AMERICA

EUROPE

MIDDLE EAST

NORTH AMERICA

As of Jan. 1,2010 (ROLAND)

LX-10F_e.book 3 ページ２０１０年１月１４日　木曜日　午後１０時４５分

Before using this unit, carefully read the sections entitled: “IMPORTANT SAFETY INSTRUCTIONS” Owner’s manual p. 3),

“USING THE UNIT SAFELY” (Owner’s manual p. 8), and “IMPORTANT NOTES” (Owner’s manual p. 10). These sections

provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner’s manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

ATTENTION

: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS.

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

WARNING - When using electric products, basic precautions should always be followed, including the following:

1.

Read these instructions.

2.

Keep these instructions.

3.

Heed all warnings.

4.

Follow all instructions.

5.

Do not use this apparatus near water.

6.

Clean only with a dry cloth.

7.

Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions.

8.

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

For the U.K.

IMPORTANT: THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE.

BLUE:

BROWN:

NEUTRAL

LIVE

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.

The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.

Under no circumstances must either of the above wires be connected to the earth terminal of a three pin plug.

Copyright © 2010 ROLAND CORPORATION

All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION.

Roland is a registered trademark or trademark of Roland Corporation in the United States and/or other countries.


Lessons at home!

Play together with your family

Dividing the keyboard for two-person performance (Twin Piano) • • • p. 27

Check your own performance

Recording your performance • • • p. 41

Play along with a metronome

Performing with the metronome • • • p. 22


Select and listen to the song you want to play!

Listening to songs • • • p. 37

Playing back songs on external media • • • p. 62

Play along with the song one hand at a time

Playing parts individually • • • p. 38

Slow down the tempo for difficult passages

Changing the song’s tempo • • • p. 40


Contents

USING THE UNIT SAFELY ..................... 8

IMPORTANT NOTES ........................... 10

Names of Things and What They Do 12

Before You Play.................................. 14

Getting Ready to Play ..................................................... 14

Connecting the Speaker Cable............................. 14

Connecting the Pedal Cord ................................... 14

Connecting the Power Cord.................................. 14

Opening/Closing the Lid ........................................ 14

Opening/Closing the Top Lid................................ 15

Using the Music Rest ................................................ 15

Turning the Power On/Off ............................................ 16

Turning the Power On ............................................. 16

Turning the Power Off ............................................. 16

Adjusting the Sound’s Volume.................................... 17

Adjusting the Brightness of the Display .................. 17

Using the Headphones................................................... 18

Connecting the Headphones................................ 18

Using the Headphone Hook.................................. 18

Listening to Demo Songs .............................................. 19

Using the Pedals ............................................................... 20

About the Adjuster ................................................... 20

Performing ......................................... 21

Performing with Various Sounds................................ 21

Performing with the Metronome ............................... 22

Changing the Metronome’s Tempo ................... 22

Changing the Metronome’s Time Signature... 23

Adjusting the Metronome’s Volume .................. 23

Adding a Count-in to Synchronize Your

Performance (Count-in) .......................................... 24

Adding Reverberation to the Sound (Reverb) ....... 25

Adjusting the Depth of the Reverb Effect ........ 25

Performing with Two layered Tones (Dual Play)... 26

Dividing the Keyboard for Two-person

Performance (Twin Piano)............................................. 27

Changing the Way in Which the Sound is

Heard (Twin Piano Mode)....................................... 28

Playing Different Tones in the Left and Right

Sides of the Keyboard (Split Play)............................... 29

Changing the Tones of the Left and Right

Zones ............................................................................. 30

Changing the Keyboard’s Split Point ................. 31

Transposing the Keyboard (Transpose) ................... 32

Disabling the Buttons (Panel Lock)............................ 33

Adjusting the Piano Sound to Your

Taste (Piano Designer) ...................... 34

What is Piano Designer?.................................................34

Using Piano Designer ......................................................34

Piano Designer Settings .................................................35

Listening to Songs ............................. 37

Playing Back Songs ..........................................................37

Playing Parts Individually...............................................38

Playing All Songs Consecutively (All Songs Play)..39

Adjusting the Volume of the Song Playback ..........39

Changing the Song’s Tempo........................................40

Changing the Pitch of the Song

(Playback Transpose).......................................................40

Recording Your Performance ........... 41

Recording Your Keyboard Performance...................41

Erasing Your Recorded Performance.........................43

Saving Your Recorded Performance..........................44

Deleting a Saved Song....................................................46

Advanced Recording Methods ....................................48

Recording Each Hand Separately.........................48

Recording a Performance You Play Along with a Song ..................................................................51

6


Various Settings................................. 53

Basic Operation in Function Mode ............................ 53

Adjusting the Keyboard Sensitivity (Key Touch)... 54

Sounds Settings ................................................................ 55

Adjusting the Sound’s Brilliance (Brilliance) .... 55

Matching the Pitch with Other Instruments

(Master Tuning) .......................................................... 55

Changing the Equalizer Settings (Equalizer) ... 55

Volume Settings................................................................ 56

Adjusting the Dual Play Volume Balance

(Dual Balance) ............................................................. 56

Adjusting the Volume (Master Gain) .................. 56

Using the Sound of a Specific Part as a

“Guide” (Mute Volume) ........................................... 56

Changing the Parts Assigned to the Track

Buttons During SMF Playback (Track Assign).. 56

Metronome Setting ......................................................... 57

Changing How the Metronome Marks the Beat (Metronome Pattern).............................. 57

Playing Back at a Fixed Tempo

(Tempo Mute) ............................................................. 57

Performing Settings ........................................................ 57

Specifying What the Key Transpose will

Affect (Transpose Mode)......................................... 57

Changing the Pitch of the Tone in Octave

Steps (Octave Shift) .................................................. 57

Pedal Settings .................................................................... 58

Changing How the Pedal Effects Are Applied

(Damper Pedal Part) ................................................. 58

Changing How the Pedals Work

(Center/Left Pedal Func) ......................................... 58

Switching On/Off the Display of Lyrics (Lyrics)...... 58

Setting the Type of CD To be Played Back

(CD/Audio Type) ............................................................... 58

Changing the Language Displayed in the Screen

(Language).......................................................................... 58

Storing Your Settings

(Memory Backup) ............................................................. 59

Restoring the Factory Settings (Factory Reset) ..... 59

Connecting to Other Devices ............ 60

Connecting a Media.........................................................60

Installing the CD Drive .............................................60

Installing the Floppy Disk Drive............................60

Connecting USB Memory........................................60

Initializing the Memory (Format Media)............61

Changing the External Memory Setting

(Ext. Memory Mode)..................................................61

Playing Back Songs on External Media ..............62

Adjusting the Volume of an Audio File or Music CD ..................................................................63

Changing the Tempo of an Audio File or Music CD ..................................................................63

Changing the Playback Pitch of a Song

(Playback Transpose)................................................63

Minimizing the Sounds in the Center

(Center Cancel) ...........................................................63

Switching VIMA TUNES Recommended Tones

(Recommended Tone) .............................................63

Saving Your Recorded Performance on External Memory..................................................64

Deleting a Song From External Memory ...........64

Copying the Song ......................................................65

Connecting to Audio Equipment................................66

Having Audio from an External Device be

Sounded Through the LX-10F...............................66

Connecting Speakers to the LX-10F and

Outputting Sounds ...................................................66

Connecting to MIDI Devices .........................................67

Connecting a MIDI Sequencer to the LX-10F ..67

Producing Sounds from a MIDI Sound

Module by Playing the LX-10F ..............................67

Preventing Doubled Notes When Connected to a Sequencer (Local Control)..............................68

MIDI Transmit Channel Settings

(MIDI Transmit Ch.)...................................................68

Sending Recorded Performance Data to a MIDI Device (Composer MIDI Out) ...................68

Connecting a Computer.................................................69

Changing the USB Driver Settings

(USB Driver) .................................................................69

Using the V-LINK Function ............................................70

Specifying the V-LINK Transmit Channel ..........70

Appendices

Troubleshooting ...............................................................71

Error Messages...................................................................74

Tone List...............................................................................75

Internal Song List ..............................................................78

Parameters Stored in Memory Backup .....................79

Music Files That the LX-10F Can Use .........................80

Main Specifications ..........................................................81

Index......................................................................................83

7


USING THE UNIT SAFELY

About WARNING and CAUTION Notices

Used for instructions intended to alert the user to the risk of death or severe injury should the unit be used improperly.

Used for instructions intended to alert the user to the risk of injury or material damage should the unit be used improperly.

* Material damage refers to damage or other adverse effects caused with respect to the home and all its furnishings, as well to domestic animals or pets.

About the Symbols

The symbol alerts the user to important instructions or warnings.The specific meaning of the symbol is determined by the design contained within the triangle. In the case of the symbol at left, it is used for general cautions, warnings, or alerts to danger.

The symbol alerts the user to items that must never be carried out (are forbidden). The specific thing that must not be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the unit must never be disassembled.

The symbol alerts the user to things that must be carried out. The specific thing that must be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the power-cord plug must be unplugged from the outlet.

ALWAYS OBSERVE THE FOLLOWING

• Do not open or perform any internal modifications on the unit.

...................................................................................................................................................

• Do not attempt to repair the unit, or replace parts within it (except when this manual provides specific instructions directing you to do so). Refer all servicing to your retailer, the nearest Roland Service Center, or an authorized Roland distributor, as listed on the

“Information” page.

...................................................................................................................................................

• Never install the unit in any of the following locations.

• Subject to temperature extremes (e.g., direct sunlight in an enclosed vehicle, near a heating duct, on top of heat-generating equipment); or are

• Damp (e.g., baths, washrooms, on wet floors); or are

• Exposed to steam or smoke; or are

• Subject to salt exposure; or are

• Humid; or are

• Exposed to rain; or are

• Dusty or sandy; or are

• Subject to high levels of vibration and shakiness.

...................................................................................................................................................

• Make sure you always have the unit placed so it is level and sure to remain stable. Never place it on stands that could wobble, or on inclined surfaces.

...................................................................................................................................................

• The unit should be connected to a power supply only of the type described in the operating instructions, or as marked on the rear panel of unit.

...................................................................................................................................................

• Use only the attached power-supply cord. Also, the supplied power cord must not be used with any other device.

...................................................................................................................................................

• Do not excessively twist or bend the power cord, nor place heavy objects on it. Doing so can damage the cord, producing severed elements and short circuits.

Damaged cords are fire and shock hazards!

..................................................................................................................................................

• This unit, either alone or in combination with an amplifier and headphones or speakers, may be capable of producing sound levels that could cause permanent hearing loss. Do not operate for a long period of time at a high volume level, or at a level that is uncomfortable. If you experience any hearing loss or ringing in the ears, you should immediately stop using the unit, and consult an audiologist.

..................................................................................................................................................

• Do not allow any objects (e.g., flammable material, coins, pins); or liquids of any kind (water, soft drinks, etc.) to penetrate the unit.

..................................................................................................................................................

• Immediately turn the power off, remove the power cord from the outlet, and request servicing by your retailer, the nearest Roland Service Center, or an authorized Roland distributor, as listed on the

“Information” page when:

• The power-supply cord or the plug has been damaged; or

• If smoke or unusual odor occurs

• Objects have fallen into, or liquid has been spilled onto the unit; or

• The unit has been exposed to rain (or otherwise has become wet); or

• The unit does not appear to operate normally or exhibits a marked change in performance.

..................................................................................................................................................

8


USING THE UNIT SAFELY

• In households with small children, an adult should provide supervision until the child is capable of following all the rules essential for the safe operation of the unit.

...................................................................................................................................................

• Protect the unit from strong impact.

(Do not drop it!)

...................................................................................................................................................

• Do not force the unit’s power-supply cord to share an outlet with an unreasonable number of other devices.

Be especially careful when using extension cords— the total power used by all devices you have connected to the extension cord’s outlet must never exceed the power rating (watts/amperes) for the extension cord. Excessive loads can cause the insulation on the cord to heat up and eventually melt through.

...................................................................................................................................................

• Before using the unit in a foreign country, consult with your retailer, the nearest Roland Service Center, or an authorized Roland distributor, as listed on the

“Information” page.

...................................................................................................................................................

• DO NOT play a CD-ROM disc on a conventional audio

CD player. The resulting sound may be of a level that could cause permanent hearing loss. Damage to speakers or other system components may result.

...................................................................................................................................................

• Do not put anything that contains water (e.g., flower vases) on this unit. Also, avoid the use of insecticides, perfumes, alcohol, nail polish, spray cans, etc., near the unit. Swiftly wipe away any liquid that spills on the unit using a dry, soft cloth.

• The unit should be located so that its location or position does not interfere with its proper ventilation.

...................................................................................................................................................

• Always grasp only the plug on the power-supply cord when plugging into, or unplugging from, an outlet or this unit.

...................................................................................................................................................

• At regular intervals, you should unplug the power plug and clean it by using a dry cloth to wipe all dust and other accumulations away from its prongs. Also, disconnect the power plug from the power outlet whenever the unit is to remain unused for an extended period of time. Any accumulation of dust between the power plug and the power outlet can result in poor insulation and lead to fire.

...................................................................................................................................................

• Try to prevent cords and cables from becoming entangled. Also, all cords and cables should be placed so they are out of the reach of children.

...................................................................................................................................................

• Never climb on top of, nor place heavy objects on the unit.

..................................................................................................................................................

• Never handle the power cord or its plugs with wet hands when plugging into, or unplugging from, an outlet or this unit.

..................................................................................................................................................

• If you need to move the instrument, take note of the precautions listed below. At least two persons are required to safely lift and move the unit. It should be handled carefully, all the while keeping it level. Make sure to have a firm grip, to protect yourself from injury and the instrument from damage.

• Check to make sure the screws securing the unit to the stand have not become loose. Fasten them again securely whenever you notice any loosening.

• Disconnect the power cord.

• Disconnect all cords coming from external devices.

•

Raise the adjusters on the stand (p. 20).

• Close the lid.

..................................................................................................................................................

• Before cleaning the unit, turn off the power and

unplug the power cord from the outlet (p. 16).

..................................................................................................................................................

• Whenever you suspect the possibility of lightning in your area, pull the plug on the power cord out of the outlet.

..................................................................................................................................................

• Be careful when opening/closing the lid so you do

not get your fingers pinched (p. 14). Adult

supervision is recommended whenever small children use the unit.

..................................................................................................................................................

• When using the stool, please observe the following points:

• Do not use the stool as a toy, or as a stepping stool.

• Do not allow two or more persons to sit on the stool.

• Do not adjust the height while sitting on the stool.

• Do not sit on the stool if the bolts holding the stool legs are loose. (If the bolts are loose, immediately retighten them using the supplied tool.)

• Never insert your hand into the gap (the metal height adjustment mechanism) under the seat lid. Doing so may cause your hand to be pinched or injured.

..................................................................................................................................................

• Always keep the following small parts that may be removed out of the reach of small children to avoid accidental ingestion of these parts.

• Screws for assembling the stand you may remove

• Included wing nut for headphone hook

• Included stereo 1/4” plug adaptor

(if a stereo 1/4”plug adaptor is included with your headphones)

..................................................................................................................................................

9


IMPORTANT NOTES

Power Supply

• Do not connect this unit to same electrical outlet that is being used by an electrical appliance that is controlled by an inverter (such as a refrigerator, washing machine, microwave oven, or air conditioner), or that contains a motor. Depending on the way in which the electrical appliance is used, power supply noise may cause this unit to malfunction or may produce audible noise. If it is not practical to use a separate electrical outlet, connect a power supply noise filter between this unit and the electrical outlet.

• Before connecting this unit to other devices, turn off the power to all units. This will help prevent malfunctions and/or damage to speakers or other devices.

• Although the LCD and LEDs are switched off when the POWER switch is switched off, this does not mean that the unit has been completely disconnected from the source of power. If you need to turn off the power completely, first turn off the POWER switch, then unplug the power cord from the power outlet. For this reason, the outlet into which you choose to connect the power cord’s plug should be one that is within easy reach and readily accessible.

Placement

• Using the unit near power amplifiers (or other equipment containing large power transformers) may induce hum. To alleviate the problem, change the orientation of this unit; or move it farther away from the source of interference.

• This device may interfere with radio and television reception. Do not use this device in the vicinity of such receivers.

• Noise may be produced if wireless communications devices, such as cell phones, are operated in the vicinity of this unit. Such noise could occur when receiving or initiating a call, or while conversing. Should you experience such problems, you should relocate such wireless devices so they are at a greater distance from this unit, or switch them off.

• Do not expose the unit to direct sunlight, place it near devices that radiate heat, leave it inside an enclosed vehicle, or otherwise subject it to temperature extremes. Also, do not allow lighting devices that normally are used while their light source is very close to the unit

(such as a piano light), or powerful spotlights to shine upon the same area of the unit for extended periods of time. Excessive heat can deform or discolor the unit.

• When moved from one location to another where the temperature and/or humidity is very different, water droplets (condensation) may form inside the unit. Damage or malfunction may result if you attempt to use the unit in this condition. Therefore, before using the unit, you must allow it to stand for several hours, until the condensation has completely evaporated.

• Do not allow rubber, vinyl, or similar materials to remain on the unit for long periods of time. Such objects can discolor or otherwise harmfully affect the finish.

• Do not allow objects to remain on top of the keyboard. This can be the cause of malfunction, such as keys ceasing to produce sound.

• Do not paste stickers, decals, or the like to this instrument. Peeling such matter off the instrument may damage the exterior finish.

Maintenance

• To clean the unit, use a dry, soft cloth; or one that is slightly dampened. Try to wipe the entire surface using an equal amount of strength, moving the cloth along with the grain of the wood.

Rubbing too hard in the same area can damage the finish.

• Never use benzine, thinners, alcohol or solvents of any kind, to avoid the possibility of discoloration and/or deformation.

• The pedals of this unit are made of brass.

Brass eventually darkens as the result of the natural oxidization process. If the brass becomes tarnished, polish it using commercially available metal polisher.

• Since wood will expand and contract depending on how it is used and the environment in which it is located, products made of wood may experience a gradual loosening of the screws over time.

To ensure that your piano remains in safe, optimal condition, you should regularly check the tightness of the screws in the locations shown in the illustration. If you find that any screws are loose, use a screwdriver to tighten them.

Maintenance (Polished-finish pianos)

• Since your piano has a polished finish that is as delicate as that found on finely crafted wooden furniture, it needs careful, periodic care.

• For regular dusting, use a soft, clean cloth and/or a piano-use feather duster. Be sure to wipe gently. Even tiny granules of grit can damage the surface of the unit if you use too much pressure when wiping.

• If the cabinet gets dirty, wipe it with a soft cloth that has been soaked with water, then squeezed dry. Afterwards, wipe it again with a soft dry cloth. Do not use any cleaners or detergents, since they might deteriorate the surface of the cabinet, and produce cracks. Do not use dusting cloths that contain chemicals.

• If the cabinet’s surface loses its luster, wipe it thoroughly with a soft cloth dampened with a little of the piano polishing liquid.

• About piano polishing liquid

• Use polishing liquid as directed by the instructions for the product.

• Use only polishing liquid that is intended for use on polishedfinish pianos. Using any other polishing liquid may cause scratches, deformation, or discoloration. To purchase polishing liquid, contact your nearby musical instrument dealer.

• Use the polishing liquid only on the polished surfaces of the cabinet. Always wipe the surface with the grain using straight, even strokes. Do not repeatedly wipe the same places using too much pressure, since that might result in the loss of luster.

• Be sure to keep the polishing liquid out of the reach of small children. If the polishing liquid is accidentally swallowed, first get them to vomit, then take them to a doctor.

Repairs and Data

• Please be aware that all data contained in the unit’s memory may be lost when the unit is sent for repairs. Important data should always be backed up on a USB memory, or written down on paper (when possible). During repairs, due care is taken to avoid the loss of data.

However, in certain cases (such as when circuitry related to memory itself is out of order), we regret that it may not be possible to restore the data, and Roland assumes no liability concerning such loss of data.

10


IMPORTANT NOTES

Additional Precautions

• Please be aware that the contents of memory can be irretrievably lost as a result of a malfunction, or the improper operation of the unit. To protect yourself against the risk of loosing important data, we recommend that you periodically save a backup copy of important data you have stored in the unit’s memory on a USB memory.

• Unfortunately, it may be impossible to restore the contents of data that was stored on a unit’s memory or a USB memory once it has been lost. Roland Corporation assumes no liability concerning such loss of data.

• Use a reasonable amount of care when using the unit’s buttons, sliders, or other controls; and when using its jacks and connectors.

Rough handling can lead to malfunctions.

• Never strike or apply strong pressure to the display.

• When connecting / disconnecting all cables, grasp the connector itself—never pull on the cable. This way you will avoid causing shorts, or damage to the cable’s internal elements.

• A small amount of heat will radiate from the unit during normal operation.

• To avoid disturbing your neighbors, try to keep the unit’s volume at reasonable levels. You may prefer to use headphones, so you do not need to be concerned about those around you (especially when it is late at night).

• When you need to transport the unit, pack it in shock-absorbent material. Transporting the unit without doing so can cause it to become scratched or damaged, and could lead to malfunction.

• Do not apply undue force to the music rest while it is in use.

• Some connection cables contain resistors. Do not use cables that incorporate resistors for connecting to this unit. The use of such cables can cause the sound level to be extremely low, or impossible to hear. For information on cable specifications, contact the manufacturer of the cable.

• Before opening or closing the keyboard lid, always make sure that no pets or other small animals are located on top of the instrument (in particular, they should be kept away from the keyboard and its lid).

Otherwise, due to the structural design of this instrument, small pets or other animals could end up getting trapped inside it. If such a situation is encountered, you must immediately switch off the power and disconnect the power cord from the outlet. You should then consult with the retailer from whom the instrument was purchased, or contact the nearest Roland Service Center.

Handling the Floppy Disk Drive

(Using Optional Floppy Disk Drive)

• Never attempt to remove a floppy disk from the drive while the drive is operating (the indicator is lit); damage could result to both the disk and the drive.

Handling Floppy Disks

• Floppy disks contain a plastic disk with a thin coating of magnetic storage medium. Microscopic precision is required to enable storage of large amounts of data on such a small surface area. To preserve their integrity, please observe the following when handling floppy disks:

• Never touch the magnetic medium inside the disk.

• Do not use or store floppy disks in dirty or dusty areas.

• Do not subject floppy disks to temperature extremes (e.g., direct sunlight in an enclosed vehicle). Recommended temperature range: 10 to 50 degree C (50 to 122 degree F)

• Do not expose floppy disks to strong magnetic fields, such as those generated by loudspeakers.

• Floppy disks have a “write protect” tab which can protect the disk from accidental erasure. It is recommended that the tab be kept in the PROTECT position, and moved to the WRITE position only when you wish to write new data onto the disk.

Rear side of the disk

Write

(can write new data onto disk)

Write Protect Tab

Protect

(prevents writing to disk)

• The identification label should be firmly affixed to the disk. Should the label come loose while the disk is in the drive, it may be difficult to remove the disk.

• Store all disks in a safe place to avoid damaging them, and to protect them from dust, dirt, and other hazards. By using a dirty or dustridden disk, you risk damaging the disk, as well as causing the disk drive to malfunction.

Handling USB memory

(Using Optional USB Memory)

• Do not connect or disconnect USB memory while it is being read from, or written to (i.e., while the USB memory access indicator will blink).

• Carefully insert the USB memory all the way in—until it is firmly in place.

• Never touch the External Memory connector. Also, avoid getting the terminals dirty.

• USB memories are constructed using precision components; handle the USB memories carefully, paying particular note to the following.

• To prevent damage to the USB memories from static electricity, be sure to discharge any static electricity from your own body before handling the USB memories.

• Do not touch or allow metal to come into contact with the contact portion of the USB memories.

• Do not bend, drop, or subject USB memories to strong shock or vibration.

• Do not keep USB memories in direct sunlight, in closed vehicles, or other such locations.

• Do not allow USB memories to become wet.

• Do not disassemble or modify the USB memories.

Handling CD-ROMs

(Using Optional CD-Drive)

• Avoid touching or scratching the shiny underside (encoded surface) of the disc. Damaged or dirty CD-ROM discs may not be read properly. Keep your discs clean using a commercially available CD cleaner.

* GS ( ) is a registered trademark of Roland Corporation.

* XGLite (

Corporation.

) is a registered trademark of Yamaha

* MMP (Moore Microprocessor Portfolio) refers to a patent portfolio concerned with microprocessor architecture, which was developed by Technology Properties Limited (TPL).

Roland has licensed this technology from the TPL Group.

* All product names mentioned in this document are trademarks or registered trademarks of their respective owners.

11


Names of Things and What They Do

1 2 3 4 5 6 7 8

17

12

26

21 22 23 24

1 [Volume] slider

Adjusts the overall volume of the LX-10F (p. 17).

2 [Reverb] button

Adds reverberation similar to what you would hear

when performing in a concert hall (p. 25).

3 [Transpose] button

Transposes the keyboard and/or song.

• Transposing the keyboard (p. 32).

• Transposing the song playback (p. 40).

4 [Twin Piano] button

• Divides the keyboard into two separate sections, allowing two people to perform in the same

registers (p. 27).

• Allows you to perform with a split keyboard

(p. 29).

5 [Function] button

Takes you to Function mode, where you can make a variety of settings, including those that change the

sound or various other functions (p. 53).

6 Tone buttons

Here you can select the sound you’ll hear when you

play the keyboard (p. 21).

25

7 [Piano Designer] button

Allows you to adjust the piano sound to your taste, for example by adjusting the string resonance

(p. 34).

8

9

Display

This shows the sound name, song number, tempo and time signature.

[

▲

] [

▼

] buttons

Use these buttons to select items in the Piano

Designer or in Function mode.

10 [–] ( ) [+] ( ) buttons

• Change the value of settings such as sounds or functions.

• Select the sound to be played from the keyboard

(p. 21).

• Select a song (p. 37).

• Fast-forward/rewind a song (p. 37).

11 [Song] (Tempo) button

• Indicates the name of the currently selected song

(p. 37).

• Changes the metronome’s tempo or time signature

(p. 22).

7


8 9 10 11 12 13 14 15

Names of Things and What They Do

16

18 19 20

12 [Metronome] button

Turns the internal metronome on/off (p. 22).

13 [ ] (Play/Stop) button

• Stops/starts playback of an internal song or a

recorded performance (p. 37).

• Starts/stops recording of your performance (p. 41).

14 [ ] (Rec) button

This lets you record your own performance into the

LX-10F (p. 41).

15 Track buttons

• Allows you to play back your performance

separately for each hand (p. 38).

• Records your performance separately for each

hand (p. 48).

• Holding down the [Right] button will disable all

button operations (Panel Lock) (p. 33).

16 [Display Contrast] knob

This adjusts the brightness of the screen (p. 17).

17 [Power] switch

Turns the power on/off (p. 16).

18 Output jacks (L/Mono, R)

You can connect an audio device or external powered speakers here to reproduce the LX-10F’s

sound (p. 66).

19 Pedal connector

Connect the pedal cord of the dedicated stand to

this connector (p. 14).

20 AC In (AC Inlet)

Connect the included power cord here (p. 14).

21 Phones jacks

Here you can connect headphones (p. 18).

22 Input jacks (L/Mono, R)

Here you can connect an audio device or another electronic musical instrument, and listen to the connected device through the LX-10F’s speakers

(p. 66).

23 MIDI Out/In connectors

You can connect these to external MIDI devices to

transfer performance data (p. 67).

24 USB connector

You can connect this to your computer for

transferring performance data (p. 69).

25 External Memory connector

Here you can connect USB memory, a CD drive, or a floppy disk drive, and use it to play or save songs

(p. 60).

26 Pedals

• These are used mainly when playing piano (p. 20).

• You can assign a variety of functions to the pedals

(p. 58).

13


Before You Play

Getting Ready to Play

Before connecting cables to the bottom panel (the back edge of the LX-10F’s bottom), you’ll need to remove the rear board upper.

To remove the rear board upper, remove the three screws from the locations shown in the illustration.

Rear Board Upper

Connecting the Power Cord

Check before you connect the power cord.

• Make sure that the [Power] switch is off (p. 16).

• Make sure that the [Volume] slider is minimized (p. 17).

1.

Connect the included power cord to the AC Inlet located at the rear of the bottom panel.

2.

Plug the other end of the power cord into an AC outlet.

fig.PowerCord.eps

Connecting the Speaker Cable

Plug the speaker cable extending from the stand into the speaker connector located at the rear of the LX-10F’s bottom panel.

Pay attention to the shape of the speaker cable’s connector, and insert it until you hear it click securely into place.

fig.SpeakerCable.eps

1

AC outlet

2

Connecting the Pedal Cord

Plug the pedal cord extending from the stand into the Pedal connector located at the rear of the LX-10F’s bottom panel.

fig.PedalCord.eps

You must use the power cord included with the LX-10F.

Opening/Closing the Lid

To open the lid, use both hands to lift it lightly.

The lid of the LX-10F is designed to close softly even if you remove your hands from it. However, it will close quite abruptly if it has been opened only slightly. Be careful not to pinch your fingers in the gap.

1.

To open the lid, use both hands to lift it.

14


2.

To close the lid, use both hands to gently lower it.

Before You Play

Using the Music Rest

You can place music books or sheet music on the top edge of the opened lid.

If you need to move the piano, make sure the lid is closed first to prevent accidents.

Opening/Closing the Top Lid

The top lid must be opened or closed by an adult.

Do not force the top lid backward; doing so will damage it.

Be careful not to pinch your fingers in the gap.

Opening the Top Lid

1.

2.

3.

Lift up the top lid.

Raise the topstick located at the right edge.

Gently lower the top lid.

Top lid

Tips for Placing Music

• Insert the sheet music into the groove on the top edge of the lid.

• Crease sheet music so that it will stay open.

If this does not work, use paper clips to secure it.

• If the sheet music is thin, attach it to a clipboard before placing it on the music Rest.

Topstick

Closing the Top Lid

1.

2.

3.

Lift up the top lid.

Fold down the topstick.

Gently lower the top lid.

15


Before You Play

9

Turning the Power On/Off

Once the connections have been completed (p. 14), turn on power to your various devices in the order specified. By turning on

devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices.

ON

OFF

1

2

Turning the Power On

1.

Move the [Volume] slider all the way to the left to minimize the volume.

2.

Press the [Power] switch.

The power will turn on, and [Piano] button and [Reverb] button will light.

After a brief interval, you’ll be able to produce sounds by playing the keyboard.

• This unit is equipped with a protection circuit. A brief interval

(a few seconds) after power up is required before the unit will operate normally.

• Always make sure to have the volume level turned down before switching on power. Even with the volume all the way down, you may still hear some sound when the power is switched on, but this is normal, and does not indicate a malfunction.

3.

Use the [Volume] slider to adjust the volume

(p. 17).

Turning the Power Off

1.

Move the [Volume] slider all the way to the left to minimize the volume.

2.

Press the [Power] switch.

The screen goes blank and the power is turned off.

If you need to turn off the power completely, first turn off the POWER switch, then unplug the power cord from the

power outlet. Refer to Power Supply (p. 10).

16


Before You Play

Adjusting the Sound’s Volume

Here’s how to adjust the volume of your keyboard playing or the playback volume of an internal song or USB memory song.

If headphones are connected, use the [Volume] slider to adjust the headphone volume.

Min Max

1.

Turn the [Volume] slider to adjust the overall volume.

Adjust the volume while you play the keyboard to produce sound.

Turning the knob toward the right will increase the volume, and turning it toward the left will decrease the volume.

Adjusting the Brightness of the Display

You can adjust the brightness of the LX-10F’s display.

1.

Turn the [Display Contrast] knob to adjust the brightness.

* You may notice something like vertical lines in the screen, but this is due to the characteristics of a liquid crystal display, and is not a malfunction. You can minimize this by using the [Display contrast] knob to adjust the brightness of the screen.

* The brightness may be affected by the temperature.

17


Before You Play

Using the Headphones

You can use headphones to enjoy the LX-10F without disturbing those around you, such as at night.

Connecting the Headphones

The LX-10F has two headphone jacks, two people can also use headphones simultaneously.

Using the Headphone Hook

Whenever you are not using the headphones, you can hang them on the headphone hook of the LX-10F.

Attaching the Headphone Hook

Wing nut

1.

2.

Plug the headphones into the Phones jack.

If headphones are connected, no sound will be output from the LX-10F’s speakers.

Use the LX-10F’s [Volume] slider to adjust the

headphone volume (P.17).

If headphones are connected, a headphone symbol is shown in the lower left of the screen.

1.

Press and twist the headphone hook included with the LX-10F into the hole in the bottom left of the

LX-10F (refer to the figure above).

2.

Turn the headphone hook wing nut to secure the headphone hook.

Do not hang anything other than headphones on the headphone hook. Doing so may damage the instrument or the hook.

•

•

•

•

Cautions when Using Headphones

To prevent damage to the cord’s internal conductors, avoid rough handling. When using headphones, mainly try to handle either the plug or the headset.

Your headphones may be damaged if the volume of a device is already turned up when you plug them in. Minimize the volume before you plug in the headphones.

Excessive input will not only damage your hearing, but may also strain the headphones. Please enjoy music at an appropriate volume.

Use headphones that have a stereo 1/4” phone plug.

18


Before You Play

Listening to Demo Songs

The LX-10F comes with demo songs.

* You won’t be able to play back demo songs if there is an unsaved performance. You’ll need to either delete or save your performance

before playing demo songs (p. 42).

2

1

1.

Hold down the [Twin Piano] button and press the

[Function] button.

The indicators of the four tone buttons, the [Twin Piano] button, the [Piano Designer] button, and the [Function] button flash.

Button with tone demo

[Piano]

[E. Piano]

[Strings]

[Others]

[Piano Designer]

Demo content

Piano tone demo song

E. Piano tone demo song

Strings tone demo song

Demo song using Guitar tones

Demo songs using the Piano

Designer function (p. 34) to

demonstrate varieties of sounds

* All rights reserved. Unauthorized use of this material for purposes other than private, personal enjoyment is a violation of applicable laws.

2.

* No data for the music that is played will be output from MIDI

Out.

Press one of the Tone buttons.

The songs will play consecutively, starting with the demo song you selected. The button for the song currently being played back flashes on and off.

When playback of the last song is reached, playback continues by returning to the first song and playing that again.

3.

4.

To stop playback, press the blinking button.

Press the [Twin Piano] button to exit Demo mode.

The indicators of the four tone buttons, the [Twin Piano] button, the [Piano Designer] button, and the [Function] button will return to their original state.

Listening to the Piano Designer demo songs

1.

In step 2, press the [Piano Designer] button.

The piano designer demo screen will appear.

2.

Press the [

▲] or [▼] button to select the type

of demo.

3.

Press a blinking tone button.

The demo song for the button you pressed will play.

You can repeat steps 2 and 3 to hear other demo songs.

19


Before You Play

Using the Pedals

The pedals perform the following operations. You’ll use them mainly when playing piano.

Soft Pedal

Sostenuto Pedal

Damper Pedal

Damper Pedal (right pedal)

Use this pedal to sustain the sound.

While this pedal is held down, notes will be sustained for an extended time even if you release your fingers from the keyboard.

With the damper pedal on an acoustic piano, when you step on the pedal it will at first offer only a slight amount of resistance, but as you press down further it will start to feel much heavier. On the LX-10F, this change in the feeling of resistance is simulated.

On an acoustic piano, when you step on the damper pedal, you’ll first hear the sound of the dampers releasing the strings. Then, you should also be able to hear the sound of strings adjacent to the ones for the notes actually played resonate sympathetically, resulting in a rich, resounding tone.

Additionally, when using half-pedaling techniques, the core of the sound disappears rapidly while a rich, spacious resonance remains, producing a unique form of reverberation. On the LX-10F, the unique, lingering tones produced by the half-pedaling technique are reproduced in addition to released-string sounds (Damper Noise) and resonating sounds (Damper Resonance).

You can modify the sound of the damper releasing the string and the sound of the sympathetic

vibration (p. 35).

Sostenuto Pedal (center pedal)

The notes you are pressing when this pedal is depressed will be sustained.

Soft Pedal (left pedal)

This pedal is used to make the sound softer.

Playing with the soft pedal depressed produces a sound that is not as strong as when otherwise played with the equivalent strength. This is the same function as the left pedal of an acoustic piano.

The softness of the tone can be varied subtly by the depth to which you press the pedal.

You can switch the function of the sostenuto pedal

and soft pedal (p. 58).

If you disconnect the pedal cord from the LX-10F while the power is turned on, the pedal effect will remain applied. You must connect or disconnect the pedal cord while the LX-10F’s power is switched off.

About the Adjuster

If you feel that the pedal is unstable (for example if you’ve moved the LX-10F to a different location), you can adjust the adjuster located on the bottom of the pedals as follows.

Adjuster

Turn the adjuster to lower it until the adjuster is in firm contact with the floor. The pedal may be damaged if there is a gap between the adjuster and the floor. In particular, when you’ve placed the LX-10F on carpet, you must turn the adjuster until it is pressing firmly against the floor.

20


Performing

Performing with Various Sounds

In addition to piano sounds, the LX-10F lets you enjoy performing with many other sounds (over 300 types).

These sounds are called “Tones.” The Tones are divided into four groups, each of which is assigned to a different Tone button.

fig.Panel

Let’s start by performing with a piano tone.

When you turn on the power, the “Grand Piano1” Tone is selected.

1

1.

Press the [Piano] button.

The currently selected tone number and tone name are shown.

2

Tone name Tone number

2.

Press the [-] or [+] button.

A different tone is selected.

About the tones you can select

Button

[Piano] button

[E. Piano] button

[Strings] button

[Others] button

Description

Selects a variety of instruments, including grand pianos, honky-tonk pianos, and historical instruments.

Selects various electric piano sounds used in pop or rock, as well as the sound of instruments played using mallets.

Selects the sounds of string instruments such as violins, as well as other instruments used in orchestras, which are appropriate when used for Dual play with a piano sound.

Selects a variety of sounds such as organ, bass, and GM2 sounds (p. 80).

* If you select a tone number from 35 through 42, the keyboard will act as a drum set.

* If you’ve selected a tone to which the Rotary effect is applied, pressing the [Others] button will change the modulation speed of the Rotary effect.

* For some tones, there are keys that do not produce sound.

* For details on the tones, refer to “Tone list” (p. 75).

21


Performing

Performing with the Metronome

You can sound the metronome while you perform.

The LX-10F contains a versatile metronome feature. You can change the metronome’s volume and time signature, or change the way in which it divides the beats.

While the song plays, the metronome will sound at the tempo and time signature of the song.

fig.Panel

fig.Panel

1.

Press the [Metronome] button.

The [Metronome] button will blink, and the display will indicate “Tempo.”

The metronome will sound.

The [Metronome] button will blink red and green according to the currently selected time signature; red indicates the strong beats, and green indicates the weak beats.

You can press the [Metronome] button once again to stop the metronome.

Changing the Metronome’s Tempo

22

2

1.



fig.table

2.


Correspondence between beat and tempo display

Beat

Tempo

2/2

=5–250

0/4, 2/4, 3/4, 4/4,

5/4, 6/4, 7/4

=10–500

3/8

=20–999

1

6/8, 9/8, 12/8

=7–333


Changing the Metronome’s Time Signature

3 2 1

1.



2.

Press the [Song] (Tempo) button.

The [Song] (Tempo) button will light orange, and the display will indicate the time signature.

3.


If you specify “0/4” only the weak beats will sound.

If you record your performance, it will be recorded with the time signature you specify here.

When you play back a song, the metronome’s time signature will be set to the time signature of that song.

Available time signatures 2/2, 0/4, 2/4, 3/4, 4/4, 5/4, 6/4, 7/4, 3/8, 6/8, 9/8, 12/8

You can change the way in which the metronome’s beats are sounded (p. 57).

* You can’t change the metronome’s time signature while a song is playing.

fig.Panel

Adjusting the Metronome’s Volume

Performing

1.

While holding down the [Metronome] button, press the [-] or [+] button.

The display will indicate the metronome’s volume.

If you set the metronome’s volume to “0” the metronome will not sound.

Metronome volume range 0–10

23


Performing

fig.Panel

Adding a Count-in to Synchronize Your Performance (Count-in)

A series of sounds rhythmically played to indicate the tempo before a song starts is called a “count-in.”

If you sound a count-in, it will be easier for you to synchronize your own performance to the tempo of the playback.

1

1.



2.

Press the [ ] button.

A two-measure count sound will be produced before the song starts playing.

2

24


Performing

Adding Reverberation to the Sound (Reverb)

You can add a pleasant reverberation to the sounds you play from the keyboard, producing the impression that you are performing in a concert hall. This effect is called “Reverb.” fig.Panel

1.

Press the [Reverb] button.

The [Reverb] button will light.

If you press the [Reverb] button once again, the button will go out and the reverb effect will be eliminated.

fig.Panel

Adjusting the Depth of the Reverb Effect

1.

While holding down the [Reverb] button, press the [-] or [+] button.

The display will indicate the depth of the reverb effect values.

1–10 Reverb depth range

Higher values apply deeper reverb.

The adjusted setting will return to its original values when you turn off the power. If you wish, you

can have this setting be retained even while the power is turned off (p. 59).

* You can’t specify the depth of the reverb effect independently for each sound. Reverb is applied at the same depth for each sound.

* The depth of the reverb effect for the song that’s playing will not change.

*

The reverb effect is not applied if Twin Piano mode (p. 28) is set to “individual.”

What are Effects?

In addition to reverb, the LX-10F provides a wide variety of other “effects” that can modify the sound in various ways.

An appropriate effect is selected for each different tone.

* Some tones do not have an effect.

25


Performing

Performing with Two layered Tones (Dual Play)

You can play two tones simultaneously from each note of the keyboard. This feature is called “Dual Play.”

As an example, here’s how to layer piano and strings tones.

fig.Panel

1.

Hold down the [Piano] button and press the [Strings] button.

Both buttons will light.

When you play the keyboard, you’ll hear both the piano and the strings tones.

Tone 1 Tone2

About the tones

Tone name

Tone 1

Tone 2

Corresponding button

Left tone button

Right tone button

How to select tones

Press the [-] or [+] button.

Hold down the Tone button for Tone 2 (the rightmost of the lit Tone buttons), and press the [-] or [+] button.

When you press any tone button, Dual play will be cancelled; you’ll hear only the tone of the button you pressed.

You can change the pitch of tone 2 in steps of an octave (p. 57).

When you press a damper pedal while using Dual play, the effect will apply to both tone 1 and tone

2, but you may change this so that the effect applies to only one tone (p. 58).

You can change the volume balance of the two tones (p. 56).

* Dual play is not available if Split Play or Twin Piano are turned on.

* For some combinations of sounds, the effect is not applied to tone 2, and this may affect how the tone sounds.

26


Performing

Dividing the Keyboard for Two-person Performance (Twin Piano)

You can divide the keyboard into left and right zones so that two people can play the same range of pitches, just as though there were two pianos.

This function is called “Twin Piano.”

For example, you could use Twin Piano to allow a student to play along with their teacher.

fig.Panel

1.

Press the [Twin Piano] button.

The [Twin Piano] button will light.

fig.Panel

When you turn Twin Piano on, the keyboard, the pedals, and the tone will change to the following settings.

Conventional keyboard

C1 C2 C3 C4 C5 C6 C7 C8

Twin Piano

C3 C4

Grand Piano 1

C5 C6 divide point

C3 C4

Grand Piano 1

C5 C6

The damper pedal for the left area

The damper pedal for the right area

When you press the [Twin Piano] button a number of times, the Twin Piano function will turn off and the [Twin Piano] button will go out.

*

Since some effects (p. 25) will no longer be applied if Twin Piano is turned on, this may change the sound of the tone.

27


Performing

fig.Panel

Changing the Way in Which the Sound is Heard (Twin Piano Mode)

1.

Hold down the [Twin Piano] button and press the [-] or [+] button.

Setting

Pair

Individual

Description

The sound of the right-hand keyboard zone will be heard more loudly from the right speaker than from the left speaker.

The sound of the left-hand keyboard zone will be heard more loudly from the left speaker than from the right speaker.

The sound of the right-hand keyboard zone will be heard only from the right speaker. The sound of the left-hand keyboard zone will be heard only from the left speaker.

* The reverb effect will be turned off.

* For some tones, the sound may not be split between left and right.

* If you play in the left-hand keyboard zone, you won’t hear sound from the headphones that are connected to the right

Phones jack. Conversely, when you play in the right-hand keyboard zone, you won’t hear sound from the left headphones.

The settings you change will return to their original values when you turn off the power.

If you wish, you can have this setting be remembered even while the power is turned off (p. 59).

28


Performing

Playing Different Tones in the Left and Right Sides of the Keyboard

(Split Play)

You can play different tones in the left and right sides of the keyboard, divided at a certain key.

This feature is called “Split Play,” and the key at which the keyboard is divided is called the “Split Point.” fig.Panel

1.

Press the [Twin Piano] button a number of times.

The Split screen will appear.

Right-hand Tone fig.Panel

Left-hand Tone

When Split is turned on, the keyboard settings will be as follows.

Split Point (Power-up default: F 3)

A0 B0 C1 D1 E1 F1 G1 A1 B1 C2

…

Left-hand Tone

C3 C4 C5

Right-hand Tone

B7 C8

Press the [Twin Piano] button a number of times to turn off Split play; the [Twin Piano] button will go out.

29


Performing

Changing the Tones of the Left and Right Zones

fig.Panel

Changing the right-hand tone fig.Panel

1

2

1.

Press a tone button.

The number and name of tone currently selected for the right-hand zone are shown.

2.



Changing the left-hand tone

1

2

1.

Hold down the [Twin Piano] button and press a tone button.

The number and name of the tone currently selected for the left-hand zone are shown.

2.

While holding down the [Twin Piano] button, press the [-] or [+] button.


You can change the pitch of the left-hand sounds in steps of an octave (p. 57).

30

LX-10F_e.book 31 ページ２０１０年１月１４日　木曜日　午後１０時４５分 fig.Panel

Changing the Keyboard’s Split Point

Performing

Range in which you can specify the split point (B1–B6)

A0 C1 B1 C2 C3 C4 C5 C6 B6 C7

Split Point

Power-up default: F 3

The Split Point belongs to the left-hand section of the keyboard

1.

Hold down the [Twin Piano] button and press the key that you want to be the new split point.

The key you pressed becomes the new split point, and that key will be shown in the display.

When you release the [Twin Piano] button, the display will return to its previous indication.

C8

The changed setting will revert to its original state when you turn off the power.

If you wish, you can have this setting be remembered even while the power is turned off (p. 59).

31


Performing

Transposing the Keyboard (Transpose)

“Transpose” means to shift the pitches produced by the keyboard.

The Transpose function makes it easy to do the following.

• The pitch of your accompaniment can be adjusted to a singer’s vocal range without changing your fingering (i.e., without changing the keys you play).

• A song written in a difficult key with numerous sharps ( ) or flats ( ) can be performed in a key that’s easier for you to play.

32

1.

Hold down the [Transpose] button and play the key that’s the tonic of the key into which you want to transpose.

The current transposition setting is shown while you hold down the [Transpose] button.

You can also change the transposition setting by using the [-] or [+] buttons while holding down the [Transpose] button.

Transposition range -6–0–5 (semitone units)

If a setting other than 0 is selected, the [Transpose] button will be lit.

To return to the original value (0), hold down the [Transpose] button and press both of the [-] or [+] buttons simultaneously.

You can use the [Transpose] button to turn the Transpose function on/off (if the transposition setting is other than “0”).

The LX-10F allows you to transpose both the keyboard and the song, or just the keyboard, or just

the song (p. 56). With the factory settings, the keyboard and the song will be transposed together.

If the Transpose Mode (p. 56) is set to “Song” (the song playback), the Transpose function will not

affect the pitches of the keyboard.

Example: Use C major fingering to play a song written in E major fig.Panel

1.

Hold down the [Transpose] button and press the E note (the tonic note for the key of E major).

Counting from C as a reference point, the tonic note for the key of E major is four chromatic steps higher, so the display indicates “+4.”

If you play

C E G

It will sound

E G B

The transposition value will return to “0” when you switch songs or turn off the power.


Performing

Disabling the Buttons (Panel Lock)

The Panel Lock setting lets you disable all of the LX-10F’s buttons. In this state, the settings will not change even if you inadvertently press a button while performing.

fig.Panel

1.

Hold down the [Right] button for a while.

Panel Lock will be activated.

The upper right of the display will show a “padlock” symbol, and all button operations will be disabled.

To cancel Panel Lock, once again hold down the [Right] button for a while.

Panel Lock will also be cancelled when you turn off the power.

* If you activate Panel Lock while a song is playing or being recorded, playback or recording will stop.

*

You can’t activate Panel Lock while in Function mode (p. 53) or while in the Demo Song screen.

33


Adjusting the Piano Sound to Your Taste (Piano Designer)

What is Piano Designer?

fig.piano

The LX-10F lets you adjust the piano sound to your taste by modifying various aspects of a grand piano’s sound, such as its strings, pedal, and keyboard resonances, as well as the keyboard touch sensitivity.

This function is called “Piano Designer.”

Hammer Noise

String Resonance

Key Touch

Temperament

Adjusting the

piano sound to your taste

Using Piano Designer

fig.piano

1

5

2

3

1.

Press the [Piano Designer] button.

The [Piano Designer] button will light, and the Piano Designer screen will appear.

The “Grand Piano 1” tone will be selected.

Parameter

2.

3.

Press the [

▲

] or [

▼

] button to select the item that you want to edit

(p. 35).

Value

Use the [-] or [+] buttons to adjust the value.

4.

Repeat steps 2–3 to adjust the piano sound to your taste.

5.

Press the [Piano Designer] button to return to the tone select screen.

The settings you’ve adjusted will return to their original values when you turn off the power.

If desired, you can have these settings be remembered even while the power is turned off (p. 59).

34



Piano Designer Settings

Parameter

Lid

Master Tuning

Damper

Resonance

Key Touch

Key Touch Offset

Hammer Noise

Hammer Response

Duplex Scale

String Resonance

Key Off Resonance

Cabinet Resonance

Damper Noise

Temperament

Temperament Key

Stretch Tuning

Value

0–6

415.3–440.0–466.2 Hz

Off, 1–10

Fixed, Super Light, Light,

Medium, Heavy,

Super Heavy

-10–0–9

-2–0–2

Off, 1–10

Off, 1–10

Off, 1–10

Off, 1–10

Off, 1–10

Off, 1–10

Equal, Just Major,

Just Minor, Arabic,

Kirnberger, Meantone,

Pythagorean,

Werckmeister

C–B

Off, Preset, User

(User: -50–0–+50)

Description

Adjusts the extent to which the lid of the grand piano is open.

The sound will become more mellow as you close the lid of the piano in the screen. The sound will become brighter as you open the lid of the piano in the screen.

This adjusts the LX-10F’s standard pitch (the pitch of the middle A note).

This adjusts the damper resonance of the acoustic piano sound (the sympathetic vibration produced in strings other than those actually played when you press the damper pedal).

Higher settings will make the sympathetic vibration louder.

Adjusts the touch sensitivity of the keyboard.

If you select “Fixed,” notes will sound at a uniform volume regardless of how strongly you play the keyboard.

This lets you make further detailed adjustments to the keyboard sensitivity as appropriate for the strength of your fingers.

Higher settings will produce a heavier playing feel.

This adjusts the sound produced when the hammer of an acoustic piano strikes the string.

Higher settings will produce a louder sound of the hammer striking the string.

This adjusts the time from when you play a key until the piano sound is heard.

Higher settings will produce slower response.

This adjusts the sympathetic vibrations of an acoustic piano’s Duplex Scale (p. 36).


This adjusts the string resonance of the acoustic piano sound (the sympathetic vibrations of strings for previously played notes that occur when you play another note).


This adjusts sympathetic vibrations such as an acoustic piano’s key-off sound (the subtle sound that occurs when you release a note).


Adjusts the body resonance of the grand piano itself.

Higher values will produce a larger body resonance.

This adjusts the damper noise of the acoustic piano sound (the sound of the damper releasing the strings when you press the damper pedal).

* No damper noise will be heard if Damper Resonance is set to “Off.”

You can play classical styles such as Baroque using historic temperaments (tuning methods).

Most modern songs are composed for and played in equal temperament, the most common tuning in use today. But at one time, there were a wide variety of other tuning systems in existence.

By playing in the temperament that was in use when a composition was created, you can experience the sonorities of chords originally intended for that song.

For details, refer to “Temperaments” (p. 36).

When playing with tuning other than equal temperament, you need to specify the temperament key for tuning the song to be performed (that is, the note that corresponds to C for a major key or to A for a minor key).

If you choose an equal temperament, there’s no need to select a temperament key.

This lets you specify the amount of “stretch tuning,” a tuning method specifically for pianos, in which the high range is tuned slightly sharper, and the low range is tuned slightly flatter.

If you select “Preset,” a standard tuning curve created for the LX-10F will be used.

If you select “User,” you’ll be able to edit the stretched tuning yourself. Play the key whose pitch you want to adjust, then use the [-] or [+] buttons to adjust its pitch.

35



Temperaments

Temperament

Equal

Just Major

Just Minor

Arabic

Kirnberger

Meantone

Pythagorean

Werckmeister

Qualities

In this tuning, each octave is divided into twelve equal steps. Every interval produces about the same amount of slight dissonance.

This tuning eliminates ambiguities in the fifths and thirds. It is unsuited to playing melodies and cannot be transposed, but is capable of beautiful sonorities.

The Just tunings differ from major and minor keys. You can get the same effect with the minor scale as with the major scale.

This tuning is suitable for the music of Arabia.

This is an improvement of the Meantone and Just tunings that provides a high degree of freedom of modulation. Performances are possible in all keys ( III).

This scale makes some compromises in just intonation, enabling transposition to other keys.

This tuning, devised by the philosopher Pythagoras, eliminates dissonance in fourths and fifths.

Dissonance is produced by third-interval chords, but melodies are euphonious.

This temperament combines the Meantone and Pythagorean tunings. Performances are possible in all keys (first technique, III).

What is the Duplex Scale?

The Duplex Scale is a system of sympathetically vibrating strings sometimes included in grand pianos.

These sympathetically vibrating strings are not struck directly with hammers, but sound by vibrating in sympathy with the vibrations of other strings. By resonating with the overtones, these strings add richness and brilliance to the sound. These sympathetic strings are added only to the high register above approximately C4. Since they do not have a damper (a mechanism that stops them from sounding), they will continue sounding even after you play a note and then release it to stop the sound of the string that was actually struck.

36


Listening to Songs

Playing Back Songs

Here’s how to listen to the built-in songs. The LX-10F provides 74 built-in piano songs.

You can also play back songs from a separately sold floppy disk drive, CD drive, or USB memory

(p. 62).

fig.Panel

2 1

1.

Press the [Song] (Tempo) button a number of times.

The [Song] (Tempo) button will light red.

2.

Press the [-] or [+] button to select a song.

The display will indicate “Preset Song.”

3.


When the song has played to its end, playback will stop.

To pause the playback, press the [

The next time you press the [ you paused.

] button once again.

] button, playback will resume from where

Fast-forward and rewind

Operation

To beginning of next song

To beginning of current song

Fast-forward the song

Rewind the song

Button

Press the [

Press the [

Hold down the [

Hold down the [

] button.

] button.

] button while the song is playing.

] button while the song is playing.

About the display fig.screen

Song number Media Song name

3

“PU” is shown as the measure number if the song starts on a weak beat.

Tempo Time signature Measure number

For details on the names of the internal songs, refer to “List of internal songs” (p. 78).

37


Listening to Songs

Playing Parts Individually

The parts of an internal song can be selected and played individually. This allows you to practice playing the left or right-hand part of a song while listening to the other hand played automatically.

Performance parts and tracks

Each part is assigned to the track buttons as shown in the illustration.

Muting

You can “mute” a specific part so that it will not be heard.

* The [Accomp] button will not light if you’ve selected a song that does not contain an accompaniment.

Accompaniment part

Track button

Left-hand part

Right-hand part fig.Panel

2

1.

Play back a song (p. 37).

2.

Press the track button for the part that you don’t want to be played.

The light for the button you pressed will go out, and the selected part will not be heard.

When you press the track button once again so it’s lit, the part will be heard again.

You can change the volume of the muted part (p. 56).

By playing back a song with the accompaniment part muted, you can skip the introduction.

The mute setting will be cancelled when you switch songs.

Practicing the right-hand part by itself

1.

Press the [Right] button.

The button will go out.

2.


The LX-10F will play the left-hand part and accompaniment part, allowing you to practice the righthand part separately.

Accompaniment part

LX-10F will play

Left-hand part

go out

Right-hand part

38


Listening to Songs

Playing All Songs Consecutively (All Songs Play)

You can have the LX-10F play all internal songs (or all songs in internal memory, or all songs in USB memory) repeatedly in succession.

This function is called “All Songs Play.” fig.Panel

1.

Hold down the [Song] (Tempo) button and press the [ button.

]

All Songs Play will be selected, and the screen will show an icon to indicate this.

* The All Songs Play function will turn off when you stop playback or turn off the power.

Adjusting the Volume of the Song Playback

You can adjust the volume at which the song plays.

This is helpful when you want to adjust the volume balance between your keyboard playing and the song playback; for example, when you’re practicing along with a song.

fig.Panel

1.

Hold down the [ ] button and press the [-] or [+] button.

The volume of song playback is shown while you hold down the [ ] button.

Song volume range 0–10

* The song playback volume is reset to “10” when you turn off the power.

39


Listening to Songs

Changing the Song’s Tempo

You can change the tempo at which a song plays back.

When you’re practicing along with an internal song, this allows you to slow down the tempo of a difficult song in order to play it more comfortably.

fig.Panel

2 1

1.

2.


The [Song] (Tempo) button will light green, and the display will indicate “Tempo.”


The tempo will change.

If desired, you can make the song play back at a fixed tempo without

allowing its tempo to change (p. 57).

Changing the Pitch of the Song (Playback Transpose)

You can change the key of a song’s playback. This is called the “Playback Transpose” function.

ig.Panel

40 f

1.

2.

Play back the song (p. 37).

Hold down the [Transpose] button and press the [-] or [+] button.

The song’s key will change in semitone steps.

Transposition range -6–0–5 (semitone units)

While you hold down the [Transpose] button, the Playback Transpose setting is displayed.

If the value is anything other than 0, the [Transpose] button will be lit.

The transposition setting will return to “0” when you select a different song.

If you hold down the [Transpose] button and press both of the [-] [+] buttons simultaneously, the setting will return to its original value (0).

You can use the [Transpose] button to turn the Playback Transpose function on/off (if the transposition setting is other than “0”).

The LX-10F allows you to transpose both the keyboard and the song, or just the keyboard, or just

the song (p. 57). With the factory settings, the keyboard and the song will be transposed together.

*

The Playback Transpose function will not apply if “Transpose Mode” (p. 57) is set to “Keyboard.”


Recording Your Performance

Recording Your Keyboard Performance

It’s easy to record your own performances.

You can play back a recorded performance to check your playing, or perform along with a recorded performance.

Getting ready to record fig.Panel

2 1 fig.Panel

1.


The [Song] (Tempo) button will light red, and the display will indicate “Internal Song.”

2.

Press the [-] button a number of times.

The display will indicate “New Song.”

3.

Select the tone that you want to use for performing (p. 21).

If desired, sound the metronome (p. 22).

4.


The [ ] button will light, the [ ] button will blink, and the LX-10F will enter recording-standby mode.

If you decide not to record, press the [ ] button once again.

Starting/stopping recording

4

1.

Press the [ ] button or play the keyboard.

A two-measure count will be heard (the measure number will be shown as “-2” then “-1” in the lower right of the display), and then recording will start.

When recording starts, the [ ] button and [ ] button will light.

A count sound will not sound if you initiated recording by playing the keyboard.

2.

Press the [

Recording will stop.

] button.

41



fig.Panel

Listening to the recorded performance

1 2

1.


You will return to the beginning of the recorded performance.

2.


The recorded performance will play.

Playback will stop when you press the [ ] button once again.

If you press the [ ] button while the metronome is sounding, there will be a two-measure count (count-in) before playback begins.

The recorded performance will be lost when you turn off the power. If you want to keep your recorded

performance, you must save it to internal memory (p. 44) or to USB memory (p. 64).

You won’t be able to play back another song if there is an unsaved performance. You’ll need to either

erase (p. 43) or save (p. 44) your performance before playing another song.

If the following indication appears

The confirmation message shown at right will appear if you attempt to select another song while the previously recorded song has not yet been saved.

Please save your recorded performance to internal memory or USB

memory (p. 64).

• If you decide to erase your recorded performance, press the [ ] button.

• If you don’t want to erase your recorded performance, press the [ ] button.

42


Erasing Your Recorded Performance

Here’s how to erase your recorded performance.

fig.Panel


1

1.

Hold down the [Song] (Tempo) button and press the [ ] button.

A confirmation message will appear.

If you decide not to erase the performance, press the [ ] button.

2.


The recorded performance will be erased.

If you hold down the [ ] button while pressing a track button, the performance of only that track will be erased.

A recorded performance will be erased when you turn off the power.

2

43



Saving Your Recorded Performance

If you’ve recorded a performance, your recorded performance will be lost if you turn off the LX-10F’s power before saving the song. If you want to keep your recorded performance, it is convenient to save it in internal memory. Songs saved in internal memory will not be lost when you turn off the power.

You can also save your recorded performances on USB memory (sold separately) or on a floppy disk

(sold separately) (p. 64).

fig.Panel

1

Getting ready to save

1.

Press the [Function] button.

You’ll enter Function mode (p. 53).

2

4

2.

Press the [

▲

] or [

▼

] button to choose “File Menu.”

3.

Press the [ ] button to go to the “File Menu.”

4.

Press the [

▲

] or [

▼

] button to choose “Save Song.”

3

5

5.


A screen will appear, allowing you to edit the song name.

44


Editing the song name fig.Panel

Switches the type of character

• Letters

• Symbols

• Numerals

Inserts a character

Deletes a character

Change the character

Select the character to change

2

1.

Use the buttons shown in the illustration above to edit the song name.

2.

Press the [ ] button to finalize the song name.

A screen will appear, allowing you to select the save destination for the song.

Selecting the save destination for the song


2 3

1

1.

Press the [

▼

] button.

2.

Press the [-] or [+] button to select the save destination.

No song has been saved in song numbers shown as “Empty” in the song name column.

Choose a song number in which no song has been saved.

If you want to save your song by overwriting an existing song you no longer need, select the song number of that unwanted song.

Song number

Song name

3.


The song will be saved.

Never turn off the power while the screen indicates “Executing...”

* You can’t select another song if the recorded performance has not yet been saved. Either press the [ ] button to erase your recorded performance, or press the [

] button to save it (p. 42).

45



Deleting a Saved Song

Here’s how to delete a song that you saved to internal memory.

If you want to delete all the songs that are saved in internal memory, initialize the memory (p. 61).

You can also delete songs from USB memory (sold separately) or a floppy disk (sold separately)

(p. 64).

fig.Panel

1

Getting ready to delete

1.


You’ll enter Function mode (p. 53).

2

4

2.

Press the [

▲

] or [

▼

] button to choose “File Menu.”

3.

Press the [ ] button to go to the “File Menu.”

4.

Press the [

▲

] or [

▼

] button to select “Delete Song.”

3

5

5.


A screen will appear, allowing you to choose the song to be deleted.

46


Choosing the song to delete

1

1.

Press the [

▼

] button.

2.

Press the [-] or [+] button to select the song that you want to delete.

2 fig.Panel

Deleting the song

1.



2.


The selected song will be deleted.

If you decide not to delete the song, press the [ ] button.

Never turn off the power while the screen indicates “Executing...”

1 2


47



Advanced Recording Methods

Recording Each Hand Separately

You can separately record your left-hand performance to the [Left] button and your right-hand performance to the [Right] button. You can also separately re-record each hand afterward.

Getting ready to record fig.Panel

48

2 1 3 4

1.


The [Song] (Tempo) button will light red, and the display will indicate “Internal Song.”

2.

Press the [-] button a number of times.

The display will indicate “New Song.”

3.


The [ ] button will light, the [ ] button and the button of the track to be recorded will blink, and the LX-10F will enter recording-standby mode.


4.

Press the button for any track that you don’t want to record, so it’s not lit.

Your performance can be recorded separately to the relevant track buttons.

Recorded performances and the track buttons

The performances you record are assigned to the track buttons as follows.

Conventional performance (using the entire keyboard to play a single tone), Dual play

Track button

Record with only a single button specified

Record with multiple buttons specified

Recorded performance

Your performance will be recorded on the specified track.

Your performance will be recorded on only one track

The priority order for recording will be: [Right] button

→ [Left] button →

[Accomp] button.

Twin Piano (p. 27), Split Play (p. 29)

Track button

[Right] button

[Left] button

Recorded performance

Twin Piano

Right

Left

Split Play

Right-hand tone

Left-hand tone


Recording and stopping


fig.Panel

1.


You’ll hear a two-measure count, and then recording will begin.

Alternatively, you can start recording by playing the keyboard instead of pressing the [ there will be no count-in.

When recording begins, the [ ] button and [ ] button will light.

] button. In this case,

During the count, “-2” then “-1” will be shown as the measure number in the lower right of the screen.

2.

To stop recording, press the [ ] button.

Additional recording

1 5

6

2

3

1.


You’ll return to the beginning of the recorded performance.

2.


If you want to erase the previously recorded performance and re-record a new performance, press the [ ] button.

4

3.

If you want to record onto a different track, press the [ ] button.

4.

Press the button of the track that you want to record, so it’s blinking.



If you select a previously recorded track for recording, your new performance will be overwritten onto that track, erasing the previously recorded performance.

49



5.



Alternatively, you can start recording by playing the keyboard instead of pressing the [ be no count-in.


] button. In this case, there will


* If you record additional material without erasing the previously recorded performance, the song’s tempo and time signature will remain as they were when first recorded.

6.

To stop recording, press the [ ] button.

When you re-record

If you re-record from the beginning, the previously recorded performance will be erased as the new recording proceeds.

fig.zu

If you want to record an entire performance, erase the previously recorded performance first (p. 43).

1st Pass

2nd Pass

The first Performance is preserved fig.Panel


50

1

1.



2.


The recorded performance will play back.

Press the [ ] button once again to stop playback.

2

Your recorded performance will be lost when you turn off the power. If you want to keep your recorded

performance, you must save it to internal memory (p. 44) or USB memory (p. 64).

You can’t play back another song if a recorded performance exists. Erase or save your recorded

performance, and then play back the desired song (p. 42).

By holding down one of the track buttons and pressing the [ ] button, you can erase the performance of just that track. If you erase the performance from all tracks, the display will indicate

“New Song.”



fig.Panel

Recording a Performance You Play Along with a Song

Here’s how you can record a performance that you play along with an internal song or a song from internal memory.

The part you select using the track buttons will be recorded, replacing the previous content of that part.

During recording, you won’t hear the sound of the track whose button you selected.

* You can’t record along with a song from a music CD, or with a song that consists of audio data.

Getting ready to perform

1.

Select the song that you want to play back (p. 37).

2.

Select the tone that you want perform (p. 21).

3.

Specify the tempo for recording (p. 40).

* The tempo of your recorded performance will be the tempo of the song you selected for recording.

When you record a performance that you play along with a song, it will be recorded with the time signature of that song.

Getting ready to record

1

2

3

1.

Press the [ ] button (Add On recording).

2.

Press the [ ] button once again.

3.

Press the track button of the part that you want to record, so it’s blinking.

With this setting, you will be listening to the selected song while you record.


If you decide to cancel recording, press the [ ] button once again.

Recorded performances and the track buttons

The performances you record are assigned to the track buttons as follows.

Track button

[Right] button

[Left] button

[Accomp] button

Performance part

Right-hand part

Left-hand part

Other performances

51



fig.Panel

Recording and stopping

52 fig.Panel

1.



Alternatively, you can start recording by playing the keyboard instead of pressing the [ there will be no count-in.


] button. In this case,


2.

Press the [

Recording will stop.

] button.


1

1.



2.


The recorded performance will play back.

Press the [ ] button once again to stop playback.

2

Your recorded performance will be lost when you turn off the power. If you don’t want to lose your

recorded performance, you must save it to internal memory (p. 44) or to USB memory (p. 64).

You can’t play back another song if a recorded performance exists. Erase or save your recorded

performance, and then play back the desired song (p. 42).


Various Settings

Basic Operation in Function Mode

“Function mode” lets you make various settings for playback and recording.

Entering Function mode fig.Panel

1

1.


The [Function] button will light, and you’ll be in Function mode.

fig.Screen

2

3

2.

Press the [

▲

] or [

▼

] button to choose the setting that you want to edit.

3.

Press the [ ] button to go to the editing screen.

Editing a setting fig.Panel

3

1

1.

Press the [-] or [+] button to edit the setting.

By pressing the [-] [+] buttons simultaneously you can return the setting to its factory-set value.

2

3.

Press the [Function] button to exit Function mode.

The button indicators will return to their previous state.

The edited settings will revert to their original value when you turn off the power.

For some settings, you can specify that they retain their edited

state even when you turn off the power (p. 59).

For details on the settings that can be saved in this way, refer

to “Items retained by Memory Backup” (p. 79).

2.

Press the [Song] (Tempo) button to return to the previous screen.

If you want to edit other settings, refer to step 2 of “Entering

Function mode” and choose the setting that you want to edit.

53


Various Settings

Settings you can change

Function

Key Touch

File Menu

Brilliance

Master Tuning

Equalizer

Dual Balance

Master Gain

Mute Volume

Track Assign

Metronome Pattern

Tempo Mute

Transpose Mode

Octave Shift

Damper Pedal Part

Center Pedal Func

Left Pedal Func

Local Control

MIDI Transmit Ch.

Composer MIDI Out

USB Driver

Ext. Memory Mode

V-LINK Transmit Ch.

Lyrics

Recommended Tone

CD/Audio Type

Language

Memory Backup

Factory Reset

Save Song

Copy Song

Delete Song

Format Media

p. 58 p. 58

p. 59 p. 59

p. 61

p. 70

p. 58

p. 63

p. 68 p. 68 p. 68

p. 69

p. 57

p. 58 p. 58 p. 58

p. 56

p. 57 p. 57 p. 57

p. 55

p. 56 p. 56 p. 56

p. 46

p. 61

p. 55 p. 55

Page

p. 54

p. 44

p. 65

Adjusting the Keyboard Sensitivity

(Key Touch)

You can change the touch sensitivity, or response of the keys.

You can adjust the keyboard touch as appropriate for the playing strength of the person who is performing.

Setting

Fixed

Super Light

Light

Medium

Heavy

Super Heavy

Description

The sound plays at one set volume, regardless of the force used to play the keys.

This setting produces the lightest keyboard touch.

You can achieve fortissimo (ff) play with a less forceful touch than usual, so the keyboard feels lighter. This setting makes it easy to play, even for children.

This sets the standard keyboard touch. You can play with the most natural touch. This is the closest to the touch of an acoustic piano.

You have to finger the keyboard more forcefully than usual in order to play fortissimo (ff), so the keyboard touch feels heavier. Dynamic fingering adds even more feeling to what you play.

This setting produces the heaviest keyboard touch.

These settings can also be edited from Piano Designer (p. 35).

54


Various Settings

Sounds Settings

Adjusting the Sound’s Brilliance (Brilliance)

Here’s how to adjust the brilliance of your keyboard playing or the playback brilliance of an internal song or USB memory song.

Increasing the value will make the sound brighter.

Setting

-10 (Mellow)–10 (Bright)

Matching the Pitch with Other Instruments

(Master Tuning)

When playing ensemble with other instruments and in other such instances, you can match the standard pitch to another instrument.

The standard pitch generally refers to the pitch of the note that’s played when you finger the middle A key. For a cleaner ensemble sound while performing with one or more other instruments, ensure that each instrument’s standard pitch is in tune with that of the other instruments. This tuning of all the instruments to a standard pitch is called “master tuning.”

Setting

415.3 Hz–440.0 Hz–466.2 Hz

When the instrument is shipped from the factory, this is set to

“440.0 Hz.”

These settings can also be edited from Piano Designer (p. 35).

Changing the Equalizer Settings (Equalizer)

You can use the equalizer to modify the tonal character of the sound by boosting or reducing just the low-frequency or high-frequency range of the sound.

1.

[

Enter Function mode, choose “Equalizer,” and press the

] button (p. 53).

fig.d-EQ-Param.eps

2.

Press the [+] button to switch “On.” fig.d-EQ-Param.eps

3.

Press the [ fig.d-EQ-Param.eps

] button.

4.

Use the [

▲

] or [

▼

] buttons to select an item.

fig.d-EQ-Param.eps

5.

Use the [-] [+] buttons to change the setting for the selected item.

Indication

EQ Number

High Gain

High Freq

High Mid Gain

High Mid Freq

High Mid Q

Low Mid Gain

Low Mid Freq

Low Mid Q

Low Gain

Low Freq

Setting

1–4

-12–+12 dB

1.25 k–16 k (Hz)

-12–+12 dB

16–16 k (Hz)

0.5, 1.0, 2.0, 4.0,

8.0

-12–+12 dB

16–16 k (Hz)

0.5, 1.0, 2.0, 4.0,

8.0

-12–+12 dB

100–1k (Hz)

Description

Selects a set of preset equalizer settings.

Adjusts the level of the highfrequency range.

Frequency point in the highfrequency range.

Generally, this changes the level at and over this frequency.

Adjusts the level of the mid- to high-frequency range.

Frequency point in the mid- to high-frequency range.

This changes the level of the specified bandwidth centered on this frequency.

Changes the bandwidth of the mid- to high-frequency range.

The bandwidth affected by the controls narrows as the value increases.

Adjusts the level of the lowfrequency range to midrange.

Frequency point in the lowfrequency range to midrange.

This changes the level of the specified bandwidth centered on this frequency.

Changes the bandwidth of the lowfrequency range to midrange.

The bandwidth affected by the controls narrows as the value increases.

Adjusts the level of the lowfrequency range.

Frequency point in the lowfrequency range.

Generally, this changes the level at and below this frequency.

* Sounds may become distorted as the Gain level increases.

55


Various Settings

Volume Settings

Adjusting the Dual Play Volume Balance

(Dual Balance)

You can adjust the volume balance between the two tones (tone 1 and tone 2) used for Dual Play.

Setting

9-1 (tone 1 is louder)–9-9 (same volume)–1-9 (tone 2 is louder)

Adjusting the Volume (Master Gain)

If you are playing the LX-10F through a connected external system, there may be cases in which the volume from your external system is too low even when the LX-10F’s volume is turned to the maximum setting.

In such cases, you can adjust the master gain setting as follows.

Adjusting the master gain will also affect the volume of the internal speakers and headphones.

* The sound may distort if you increase the volume excessively.

Setting

-12–0–12 dB

Using the Sound of a Specific Part as a

“Guide” (Mute Volume)

If desired, you can specify that the sound of a track will play at a reduced volume rather than going completely silent when you press a track button and turn off its indicator.

This setting lets you play a specific part at a reduced volume and use it as a “guide” for your playing.

Setting

0–10

Description

Increasing the value will make the sound louder.

When you turn off the power, the track mute volume will be reset to

“0.”

Changing the Parts Assigned to the Track

Buttons During SMF Playback (Track Assign)

Ordinarily, when playing back SMF music files for Roland Piano

Digital instruments (p. 80), the left-hand part is assigned to the [Left]

button, and the right-hand part is assigned to the [Right] button.

However, right-hand and left-hand part assignments in certain SMF music files may differ.

If these are set to “Auto,” and as a result you are unable to use the track buttons to control the left- and right-hand parts properly, change the setting to “2/1 Part” or “3/4 Part.”

* This setting can be used for SMF format songs other than the internal preset songs. It will not affect internal preset songs.

Setting

Auto

2/1 Part

3/4 Part

Description

The part assigned to each track will be determined automatically, depending on the song file.

Assigns Part 1 to the [Right] button, Part 2 to the [Left] button, and the remaining parts to the [Accomp] button.

Assigns Part 4 to the [Right] button, Part 3 to the [Left] button, and the remaining parts to the [Accomp] button.

After changing this setting, try selecting the song once again.

56


Various Settings

Metronome Setting

Changing How the Metronome Marks the

Beat (Metronome Pattern)

You can set the metronome to play at even smaller intervals.

The metronome will sound when you enter the setting screen.

-

Setting

Normal

Double

Triplet

Shuffle

Description usual sound dotted half note half note dotted quarter note quarter note dotted eighth note eighth note sixteenth note note added to back beat of every beat added notes sound every beat as a triplet notes added to create a shuffle

Playing Back at a Fixed Tempo

(Tempo Mute)

Some of the internal songs have a tempo that varies during the song.

If desired, you can make these songs play at a fixed tempo.

Setting

On

Off

Description

Tempo changes recorded in the song will be ignored, and the song will play at a fixed tempo.

The song will play according to the tempo changes it contains.

If Tempo Mute is turned on, the tempo indication in the screen will be highlighted.

fig.d-EQ-Param.eps

Performing Settings

Specifying What the Transpose will Affect

(Transpose Mode)

This setting specifies what the transpose will affect.

You can use the transpose to change the pitch of both the song and the keyboard, the pitch of only the song, or the pitch of only the keyboard.

Setting

Keyboard

Song

Keyboard & Song

Description

Keyboard notes

Transpose (p. 32)

Song playback

Playback Transpose (p. 40)

Keyboard notes and song playback

Changing the Pitch of the Tone in Octave

Steps (Octave Shift)

You can change the pitch of the Tone 2 in Dual Play (p. 26) and

Lower tone in Split Play (p. 29) an octave at a time.

Altering the pitch in one-octave units in this way is called “Octave

Shift.”

For example, you can raise the pitch of the Lower Tone to the same pitch of the Upper Tone in Split Play.

Setting

-2–0–+2

57


Various Settings

Pedal Settings

Changing How the Pedal Effects Are

Applied (Damper Pedal Part)

When you press the damper pedal during Dual play or Split play, the pedal effect is normally applied to both tones, but you can also select the tone to which the effect is to be applied.

Setting

Right & Left

Right

Left

Description

All enabled

Applied only to the Tone 1 (in dual mode)/Right-hand

Tone (in split mode)

Applied only to the Tone 2 (in dual mode)/Left-hand

Tone (in split mode)

Changing How the Pedals Work

(Center/Left Pedal Func)

When you turn on the power, the left pedal functions as the soft

pedal, and the center pedal functions as the sostenuto pedal (p. 20).

You can change the function of the pedal to a variety of other operations.

Setting

Soft

Sostenuto

Play/Stop

Layer

Octave

Description

Sets function to soft pedal.

* Selectable only for the left pedal.

Sets function to sostenuto pedal.

* Selectable only for the center pedal.

The pedal will have the same function as the [ button.

Pressing the pedal will layer on Tone 2, used for Dual play.

* The Layer function can be applied only when using

Dual play.

Pressing the pedal will layer on a sound one octave higher.

* The Octave function cannot be applied while using

Twin Piano, Dual play, or Split play.

]

* “Layer” and “Octave” cannot be specified simultaneously for the center and left pedals.

Switching On/Off the Display of

Lyrics (Lyrics)

This lets you specify whether lyrics will be displayed in the screen when you play back song data that contains lyrics.

Setting

On

Off

Description

Lyrics will be displayed.

Lyrics will not be displayed.

This is set to “On” at the factory.

Setting the Type of CD To be

Played Back (CD/Audio Type)

The LX-10F may be unable to correctly recognize the type of CD being used. In such instances, you can specify the type of CD manually.

Setting

Auto

Type A

Type B

Stereo

Description

The CD type is detected automatically

General CDs for Player Piano contain audio and MIDI data, and the data format may vary from one CD to the next. If the CD’s data format does not match the

LX-10F’s settings, a “beep” will sound. Certain general Piano player CDs may not be playable on the LX-10F.

Commercial Audio CD

(CDs other than those designed for use with the player piano)

* Note that some commercial player piano CDs cannot be played back on the LX-10F.

Changing the Language Displayed in the Screen (Language)

You can change the language that is displayed in the screen.

Setting

English, Japanese

58


Various Settings

Storing Your Settings

(Memory Backup)

The settings you edit in Function mode will return to their factoryset values when you turn off the power, but the “Memory Backup” function lets you store these settings so that they will not change even when you turn off the power.

1.

Enter Function mode, choose “Memory Backup,” and press the [

] button (p. 53).

fig.d-Backup2.epsfig.d-EQ-Param.eps

2.

To store the settings, press the [ ] button.

If you decide not to store the settings, press the [Song] (Tempo) button.

fig.d-EQ-Param.eps

Restoring the Factory Settings

(Factory Reset)

When you execute the “Factory Reset” function, the settings you’ve edited in Function mode will be restored to their factory-set state.

Execute this function when you want the settings you saved using the Memory Backup function to be restored to the state they were in when you purchased the LX-10F.

When you execute “Factory Reset,” all stored settings will be erased and returned to the factory settings.

This function will not erase the songs from internal memory or external memory such as separately sold USB memory.

If you want to erase internal memory or external memory such

as USB memory, refer to “Initializing the Memory (Format

Media)” (p. 61).

1.

Enter Function mode, choose “Factory Reset,” and press the [

] button (p. 53).

fig.d-EQ-Param.eps

3.

To execute the operation, press the [ ] button.

If you decide to cancel, press the [ fig.d-EQ-Param.eps

] button.

2.

To execute Factory Reset, press the [ ] button.

If you decide not to execute Factory Reset, press the [Song] (Tempo) button.

fig.d-EQ-Param.eps

When the memory backup has been completed, the Function mode menu screen will appear.

3.

If you’re sure you want to execute, press the [ ] button.

To cancel, press the [ fig.d-EQ-Param.eps

] button.

Never turn off the power while the settings are being saved.

For details on the items that are saved, refer to “Parameters

Stored in Memory Backup” (p. 79).

The factory reset will be executed.

Never turn off the power while the Factory Reset is being executed.

When the factory reset is completed, the following screen will appear.

fig.d-EQ-Param.eps

4.

Turn the power off, and then on again (p. 16).

59


Connecting to Other Devices

Connecting a Media

You will be able to accomplish the following once you’ve connected external media (CD drive, floppy disk drive, or USB memory).

Device

CD drive

Floppy disk drive

USB memory

What you can do

Play back music CDs, SMF music files, and songs from a VIMA CD-ROM (VIMA TUNES sold by Roland)

Play back SMF music files, and save performance data

Play back SMF music files, save performance data, and play back audio files

* If you’re using new USB memory, you’ll need to initialize (format) it on the LX-10F. For details, refer to “Initializing the Memory” (p. 61).

Installing the CD Drive Installing the Floppy Disk Drive

Attach the CD drive as shown the figure, using the mounting holes on the LX-10F’s bottom panel.

* For details of the attachment or connecting, refer to the owner’s manual of the CD drive.

fig.aaa

Attach the floppy disk drive as shown the figure, using the mounting holes on the LX-10F’s bottom panel.

* For details of the attachment or connecting, refer to the owner’s manual of the floppy disk drive.

fig.aaa

* Use a CD drive sold by Roland. We cannot guarantee operation if any other CD drive is used.

Precautions Concerning Use of the CD

• You cannot play back CD-R/RW disks to which audio tracks have been added or CDs containing both audio tracks and data

(CD Extra).

• The LX-10F is capable of playing back only commercial CDs that conform the official standards-those that carry the

“COMPACT DISC DIGITAL AUDIO” logo.

• The usability and sound quality of audio discs that incorporate copyright protection technology and other non-standard CDs cannot be guaranteed.

• For more detailed information on audio discs featuring copyright protection technology and other non-standard CDs, please consult the disc vendor.

• You cannot save songs and styles to CDs, and you cannot delete songs or styles recorded to CDs. Furthermore, you cannot format CDs.

* Use a floppy disk drive sold by Roland. We cannot guarantee operation if any other floppy disk drive is used.

Connecting USB Memory

fig.aaaa

Connect the USB memory to the External Memory connector as shown the figure.

* Carefully insert the USB memory all the way in—until it is firmly in place.

* Use a USB memory sold by Roland. We cannot guarantee operation if any other USB memory is used.

60


Initializing the Memory (Format Media)

Here’s how you can completely erase all songs that were saved in internal memory, USB memory (sold separately), or a floppy disk

(sold separately).

Once an initialization is performed, all songs that have been saved in memory will be erased. The erased data cannot be recovered, so we recommend that you check the contents of memory before you proceed.

If you’re using new USB memory (sold separately) or floppy disk (sold separately) with the LX-10F for the first time, you’ll need to initialize (format) the USB memory or a floppy disk before using it. The LX-10F can’t use USB memory or a floppy disk that has not been initialized.

If you want to initialize USB memory or a floppy disk, make the following preparations before you proceed.

• Connect your USB memory to the external memory connector.

• Connect your floppy disk drive to the external memory connector, and insert a disk in the drive.

1.

[

Enter Function mode, choose “File Menu,” and press the

] button (p. 53).

2.

fig.aaaa

Press the [

▲

] or [

▼

] button to choose “Format Media.”

3.


fig.aaaa

If you decide not to execute Format Media, press the [Song]

(Tempo) button.

4.

Press the [-] or [+] button to select the memory that you want to initialize.

Display

Internal Memory

External Memory

Disk

Description

Internal memory

USB memory

Floppy disk

5.


fig.aaaa



If you press the [ ] button, you’ll return to the previous screen without initializing.

6.


Initialization will begin.

The entire contents of the selected memory will be erased.

Caution when Initializing the Memory

• Never turn off the power while “Executing...” is shown in the display.

• If the screen indicates “Error,” please refer to “Error Messages”

(p. 74).

• Initializing the LX-10F’s internal memory will not initialize settings other than the contents of internal memory. If you want to return settings other than the contents of internal memory to their factory-set condition, execute the Factory

Reset operation (p. 59).

• Don’t disconnect the USB memory until USB memory initialization has been completed.

• While a floppy disk is being initialized, do not eject the disk from the floppy disk drive or disconnect the cable of the disk drive.

Changing the External Memory Setting

(Ext. Memory Mode)

In some cases, when USB memory is connected to the external memory connector, it may take longer for data to be loaded, or data may fail to be loaded successfully. If this occurs, you may be able to solve the problem by changing the external memory setting.

1.

Enter Function mode, choose “Ext. Memory Mode,” and press the [

] button (p. 53).

2.


Setting

Mode 1, Mode 2

3.

If you change this setting, turn on the power once again.

This setting is remembered even when the power is turned off.

61



Playing Back Songs on External Media

1.

You can play back songs from a CD, USB memory, or a floppy disk.

You can play back songs that are music data (p. 80) or audio files (p. 73).

Prepare the external media that contains the song you want to play.

Insert the floppy disk into the floppy disk drive, or the CD into the

CD drive.

2.


The [Song] (Tempo) button will light red, and the song select screen will appear.

Selecting a song

Button operations

Select a song

3.

Select the song that you want to play back.

Refer to “Selecting a song” below.

4.


For details on operations during playback, refer to step 3 of “Playing

Back Songs” (p. 37).

* Press the [-] or [+] button to select a song.

Order in which memories are selected

1.

The song to be newly recorded

Select a memory

Select a song

Display

External Memory

CD

Music CD

Disk

Discription

USB memory

CD-ROM

Music CD

Floppy Disk

2.

Songs from CD, USB memory, or floppy disk

* This cannot be selected if nothing is connected to the external memory connector.

3.

Songs from internal memory

* This cannot be selected if there are no songs.

Select a memory

Select a song

Shown for audio files

4.

Internal songs

Select a memory

Select a song

Select a song that’s inside a folder

• To select a song that’s inside a folder, select the folder and press the [

• To exit the folder, select “Up” and press the [ ] button.

] button.

* If a folder contains 500 or more files and/or folders, some of the files and folders may not be displayed.

62



Adjusting the Volume of an Audio File or

Music CD

You can adjust only the volume of an audio file or music CD.

1.

Play back the audio file or music CD (p. 62).

2.

Hold down the [ button.

] button and press the [-] or [+]

Setting

0–10

Changing the Tempo of an Audio File or

Music CD

You can change the tempo of an audio file or a song from a music

CD.

1.


The [Song] (Tempo) button will light green, and the display will indicate “Audio Tempo.”

2.


Setting

75–100–125 (%)

If you select a different song or turn off the power, the tempo will revert to a setting of “100.”

Changing the Playback Pitch of a Song

(Playback Transpose)

You can also change the playback pitch for a music CD song or an

audio file (Playback Transpose; p. 40).

1.


2.

While holding down the [Transpose] button, press the [-] or [+] button.

Setting

-6–0–5 (semitone units)

* If you’ve selected a music CD song or audio file, using Playback

Transpose may affect the tonal character.

Minimizing the Sounds in the Center

(Center Cancel)

Sounds on a music CD or audio file that are heard from the center

(typically the vocal or melody instrument) can be minimized in the playback.

1.


2.

Press the [Right] button so its light is turned off.

The volume of the melody or vocal will decrease.

* For some songs, the sound heard from the center may not disappear completely.

To turn off the Center Cancel function, press the [Right] button.

The Center Cancel function will also be turned off when you select a different song.

* For some songs, using Center Cancel may affect the tonal character.

Switching VIMA TUNES Recommended

Tones (Recommended Tone)

You can connect a commercially available USB CD drive to the LX-

10F, and play back separately sold CD-ROMs created for the VIMA

(VIMA TUNES p. 80).

Songs on VIMA CD-ROM (VIMA TUNES) are programmed with

“recommended tones” suitable for each song.

When you select a song from a VIMA CD-ROM (VIMA TUNES), recommended tones will be assigned to the LX-10F’s [E. Piano],

[Strings], and [Others] tone buttons, and these three tone buttons will blink. When you press a flashing Tone button, the recommended tone is then selected, enabling you to perform the selected song using a tone matched to that song as it plays back.

You can set the LX-10F so that the recommended tones are automatically assigned or not assigned.

1.

Enter Function mode, choose “Recommended Tone,” and press the [

] button (p. 53).

2.

Press the [-] or [+] button to switch “On” or “Off.”

Setting

On

Off

Description

When you select a song from a VIMA CD-ROM (VIMA TUNES), recommended tones will automatically be assigned to the

LX-10F’s [E. Piano], [Strings], and [Others] tone buttons.

The recommended tones are not used, and only the LX-10F’s internal tones can be selected.

This is set to “On” at the factory.

63



Saving Your Recorded Performance on

External Memory

Here’s how to save your recorded performance to USB memory or a floppy disk.

Getting ready to save

1.

[


] button (p. 53).

2.

fig.aaaa

Press the [

▲

] or [

▼

] button to choose “Save Song.”

Deleting a Song From External Memory

Here’s how to delete a song that you saved on USB memory or a floppy disk.

Getting ready to delete

1.

[


] button (p. 53).

2.

fig.aaaa

Press the [

▲

] or [

▼

] button to choose “Delete Song.”

3.


Changing the name of a song

1.

fig.aaaa

Edit the song name (p. 45).

3.


Selecting the song to delete

1.

fig.aaaa

Press the [-] or [+] button to select either “External

Memory” or “Disk.”

Choosing a save destination, and saving

1.

fig.aaaa

Press the [-] or [+] button to choose “External Memory” or “Disk.”

2.

Press the [

▼

] button.

3.

Press the [-] or [+] button to select the song that you want to delete.

Deleting the song

1.

fig.aaaa



2.

Press the [

▼

] button.

3.

Press the [-] or [+] button to select the save destination.

4.


Never turn off the power while the display indicates

“Executing...”

* You can’t select another song if the recorded performance has not

been saved. Please save the recorded performance (p. 42).

* If you want to erase an unwanted song and replace it with the newly saved song, select the number of the unwanted song.

2.


The selected song will be deleted.

If you decide not to delete, press the [ ] button.

Never turn off the power while the display indicates

“Executing...”

* You can’t select another song if the recorded performance has not

been saved. Please save the recorded performance (p. 42).

64



Copying the Song

Songs that have been saved in internal memory can be copied to USB memory.

Alternatively, songs stored on a USB memory device can be copied to internal memory.

Getting ready to copy

1.

[


] button (p. 53).

2.

fig.aaaa

Press the [

▲

] or [

▼

] button to choose “Copy Song.”

Copying the song

1.


The selected song will be copied.

* You cannot copy songs on audio files.

Never turn off the power while “Executing...” is shown in the display.

3.


Selecting the song to copy

1.

fig.aaaa

Press the [-] or [+] button to select either “External

Memory” or “Disk.”

Save and Copy

A song you’ve recorded can be saved in internal memory or

USB memory.

fig.aaaa

Songs saved in internal memory can be copied to external memory, such as USB memory.

LX-10F

Save Recorded Song Save

1

2

3

4

LX-10F

Internal Memory

Copy

Copy

External Memory

USB Memory,

Floppy Disk Drive

(Sold Separately)

2.

Press the [

▼

] button.

3.

Press the [-] or [+] button to select the song that you want to copy.

If you choose “Copy all,” all songs in the copy-source memory will be copied.

4.


5.

fig.aaaa

Press the [-] or [+] button to select the copy-destination number.

Numbers for which a song name is shown already contain a song.

If you select a number at which a song has already been saved, and execute the copy operation, the previously saved song will be deleted.

If you don’t want to delete an existing song, select an unused number.

65



Connecting to Audio Equipment

If you connect the LX-10F to powered speakers or to an audio system that has line input jacks, you’ll be able to hear the LX-10F’s sound from your powered speakers or audio system. If you connect your portable audio player or other audio playback device to the LX-10F, you’ll be able to hear its sound via the LX-10F. Use audio cables (sold separately) to make connections.

Caution when making audio connections

To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections.

When connection cables with resistors are used, the volume level of equipment connected to the inputs jacks may be low. If this happens, use connection cables that do not contain resistors.

Having Audio from an External Device be

Sounded Through the LX-10F.

fig.aaaa

Connecting Speakers to the LX-10F and

Outputting Sounds

fig.aaaa

Output jacks

Input jacks

1/4" plug

RCA PIN

Output (Line out) jack

Portable audio player, etc.

1.

2.

3.

4.

5.

6.

Turn the volume all the way down on the LX-10F and on the audio device.

Turn off the power to the LX-10F and audio device.

Use audio cables (sold separately) to make the connection.

Switch on the connected audio device.

Switch on the LX-10F.

Adjust the volume level on the LX-10F and the connected audio device.

The sounds from the connected audio device are played by the LX-

10F.

Adjust the volume by using the controls of your audio device.

Turning Off the Power

1.

2.

3.

Turn the volume all the way down on the LX-10F and on the audio device you’re about to connect.

Turn off the LX-10F.

Turn off the connected audio device.

66

Amplified Speakers,

Audio System, etc.

Input (Line In) jacks

4.

5.

6.

1.

2.

3.

Turn the volume all the way down on the LX-10F and on the speaker.

Turn off the power to the LX-10F and speakers.

Use audio cables (sold separately) to make the connection.

Switch on the LX-10F.

Switch on the connected speakers.

Adjust the volume level on the LX-10F and the connected speakers.

When you play the LX-10F’s keyboard, the sound is played from the connected speakers.

Turning Off the Power

1.

2.

3.

Turn the volume all the way down on the LX-10F and on the speakers you’re about to connect.

Turn off the connected speakers.

Turn off the LX-10F.



Connecting to MIDI Devices

By connecting an external MIDI device and exchanging performance data, you can control one device from the other.

For instance, you can output sound from the other instrument or switch Tones on the other instrument.

What’s MIDI?

MIDI, short for “Musical Instrument Digital Interface,” was developed as a universal standard for the exchange of performance data between electronic instruments and computers.

The LX-10F is equipped with MIDI connectors to let it exchange performance data with external devices. These connectors can be used to connect the LX-10F to an external device for even greater versatility.

Connecting a MIDI Sequencer to the LX-10F

fig.aaaa

Producing Sounds from a MIDI Sound

Module by Playing the LX-10F

fig.aaaa

MIDI Out/In connectors

MIDI Out connector

MIDI cable

MIDI cable

OUT MIDI IN

MIDI Sequencer

When the LX-10F is connected to a MIDI sequencer, set it to

“Local Off” (p. 68).

THRU

MIDI

OUT IN

MIDI Sound Module

Making the Connection

1.

2.

3.

4.

5.

6.

Turn the volume all the way down on the LX-10F and on the MIDI device.

Switch off the power to the LX-10F and the MIDI device.

Use a MIDI cables (sold separately) to connect the MIDI connectors to each other.

Switch on the power to the LX-10F and the connected

MIDI device.

Adjust the volume level on the LX-10F and the connected

MIDI device.

You should also set the MIDI transmit channel as needed.

For details on the MIDI transmit channel, refer to “MIDI

Transmit Channel Settings (MIDI Transmit Ch.)” (p. 68).

67



Preventing Doubled Notes When

Connected to a Sequencer (Local Control)

When you have a MIDI sequencer connected, set this parameter to

Local Off.

fig.aaaa

Since the Thru function of your sequencer will normally be turned on, notes played on the keyboard or played back by the sequencer will be transmitted to the sound generator by the two routes (1) and

(2) shown in the illustration, causing notes to be sounded in duplicate or to be cut off unnaturally. To prevent this, the setting called “Local Off” is used to disconnect the route in (1).

(1) Local On

Sequencer

Sound

Generator

MIDI

IN

MIDI

OUT

Memory

MIDI

OUT

MIDI

IN

(2) Soft Thru On

Each note played is sounded twice

Local On: fig.aaaa

The keyboard and sequencer are connected to the internal sound generator.

Sound is emitted

Local On

Sound Generator

Local Off: fig.aaaa

The keyboard and sequencer are not connected to the internal sound generator. No sound will be produced by the keyboard when it is played.

No sound produced

Sound Generator

Local Off

1.

Enter Function mode, choose “Local Control,” and press the [

] button (p. 53).

2.


Setting

On

Off

Description

The Local Control is set to On.

The keyboard and sequencer are connected to the internal sound generator.

The Local Control is set to Off.

The keyboard and sequencer are not connected to the internal sound generator. Playing the keyboard or playing back a song will not produce sound.

MIDI Transmit Channel Settings

(MIDI Transmit Ch.)

This setting specifies the MIDI channel on which the LX-10F will transmit. MIDI uses sixteen “MIDI channels,” which are numbered 1 through 16. By connecting MIDI devices and specifying the appropriate MIDI channel for each device, you can play or select sounds on those devices.

The LX-10F will receive all sixteen channels (1–16).

1.

Enter Function mode, choose “MIDI Transmit Ch.,” and press the [

] button (p. 53).

2.


Setting (Channel)

Off, 1–16

When set to “Off,” none of the data describing what you play on the keyboard will be transmitted.

Sending Recorded Performance Data to a

MIDI Device (Composer MIDI Out)

When Composer MIDI Out is “On,” you can send performance data recorded with the LX-10F to a connected MIDI device or computer.

1.

Enter Function mode, choose “Composer MIDI Out,” and press the [

] button (p. 53).

2.


Setting

On

Off

Description

Performance data is transmitted.

Performance data is not transmitted.

68



Connecting a Computer

The following become possible once you connect a USB cable

(available separately) between the USB connector on the LX-10F’s left end of the bottom panel and the USB connector of your computer.

• You can use the LX-10F to play sounds from SMF music files played back with MIDI software.

• By exchanging MIDI data with sequencer software, you can save songs recorded with the LX-10F to your computer, and enjoy a variety of musical control and editing features.

fig.aaa

USB connector

Computer

USB cable

USB connector

* Connect the LX-10F to your computer as shown right.

Changing the USB Driver Settings

(USB Driver)

Normally, you don’t need to install a driver in order to connect the

LX-10F to your computer. However, if some problem occurs, or if the performance is poor, using the Roland original driver may solve the problem.

Specify the USB driver you want to use, and then install the driver.

1.

[

Enter Function mode, choose “USB Driver,” and press the

] button (p. 53).

2.

Press the [-] or [+] button to switch “Generic” or

“Original.”

Setting

Generic

Original

Description

Choose this if you want to use the standard USB driver that was included with your computer.

Normally, you should use this mode.

Choose this if you want to use a USB driver downloaded from the Roland website.

If you change this setting, turn on the power once again.

This setting is remembered even when the power is turned off.

For details on downloading and installing the Roland original driver, refer to the Roland website.

Roland website

Here you can download the original driver, and view the installation procedure and operating requirements.

Roland website: http://www.roland.com/

69



Using the V-LINK Function

Connecting the LX-10F to a V-LINK compatible image device allows you to control the images with the LX-10F.

* To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections.

V-LINK

V-LINK ( ) is a function that allows music and images to be performed together. By using MIDI to connect two or more V-LINK compatible devices, you can easily enjoy performing a wide range of visual effects that are linked to the expressive elements of a music performance.

fig.aaa

1.

fig.aaa

Hold down the [Reverb] button and press the

[Transpose] button.

When the V-LINK function is on, the V-LINK icon appears on the screen.

fig.aaa

You can control images using the twelve keys at the left end of the keyboard.

Specifying the V-LINK Transmit Channel

Here’s how to specify the channel on which messages used to control video will be sent.

1.

Enter Function mode, choose “V-LINK Transmit Ch.,” and press the [

] button (p. 53).

2.

Use the [-] or [+] button to edit the setting.

Setting

1–16

A0 B0 C1 D1 E1 F1 G1

A0 – G#1

* While V-LINK is switched on, no sound is produced when you press any of the twelve keys at the left end of the keyboard.

To cancel V-LINK, hold down the [Reverb] button and press the

[Transpose] button.

70


Troubleshooting

If you think there’s a problem, read this first.

Symptom

Power does not turn on

Nothing appears in the screen

Pedal does not work, or is “stuck”

Unable to read from/write to USB memory

“Buzz” is heard from external devices

Cause/Action

Is the power cord connected correctly?

Since the LX-10F uses a liquid crystal screen, it may happen that no text or graphics appear in the screen if the temperature is below zero degrees Celsius (32 degrees Fahrenheit).

Is the pedal connected correctly?

Plug the cable firmly into the pedal connector.

Page

p. 14

—

p. 14

If you disconnect the pedal cord from the LX-10F while the power is on, the pedal effect may remain “stuck” in the

On condition.

You must power-off the LX-10F before connecting or disconnecting the pedal cord.

—

Could you have changed how the pedal effect is applied?

If the damper pedal part is set to Right, the pedal will apply only to the right tone; if it is set to Left, the pedal will apply only to the left tone.

p. 58

Could Twin Piano be turned on?

If Twin Piano is on, the right pedal will affect only the right-hand keyboard zone and the left pedal will affect only the left-hand keyboard zone.

p. 27

Could you have changed the function of the pedal?

If you’ve switched the function of the soft pedal or sostenuto pedal, these pedals will not operate as the soft pedal or sostenuto pedal.

p. 58

Are you using (optional) Roland USB memory?

Reliable performance cannot be guaranteed if you use non-Roland USB memory products.

—

If you are unable to read or write USB memory successfully, change the External Memory setting.

Are the external devices connected to more than one AC power outlet?

If you connect external devices, be sure to connect them to the same AC outlet.

Could you be using a connection cable that contains a resistor?

Use a connection cable that does not contain a resistor.

p. 61

—

—

Device connected to the Input jacks have insufficient volume

No sound

No sound

Is the speaker cable connected correctly?

Could the LX-10F’s volume or the volume of the connected equipment be turned down?

Could headphones be connected?

Could there be a plug inserted in a headphone jack?

The speakers will not produce sound if headphones or plug are connected to the headphone jacks.

p. 14

p. 17

p. 18

Has Local Control been set to “Off”?

When Local Control is set to Off, no sound is produced by playing the keyboard. Set Local Control to On.

Has Local Control been set to “Off”?

When Local Control is set to Off, no sound is produced by playing the song. Set Local Control to On.

p. 68

Could Twin Piano mode be set to “Individual”?

If headphones are connected when Twin Piano is “on” and the mode is set to “Individual,” notes played in the lefthand keyboard zone will not be heard from the headphones connected to the right Phones jack. Similarly, notes played in the right-hand keyboard zone will not be heard from the headphones connected to the left Phones jack.

p. 28

p. 68

No sound when you play back a song

No sound from the leftmost notes of the keyboard

Could the song volume be set to “0”?

Is V-LINK switched on?

When V-LINK is on, the lowest twelve notes of the keyboard are used to control the image, and will not produce sound.

p. 39

p. 70

No sound (when a MIDI device is connected)

Are all devices powered on?

Are the MIDI cables connected correctly?

Do the MIDI channels of the LX-10F and the connected device match?

—

p. 67

p. 68

71


Troubleshooting

Symptom

Notes don’t sound right

Cause/Action Page

Sound is not loud enough

Only the high sounds are heard


p. 14

Pitch of the keyboard or song is incorrect

Could you have made Transpose settings?

Is the Master Tune setting appropriate?

Is the setting for the Temperament correct?

p. 32

p. 55

p. 35

Not all the notes you play are sounded

Is the settings for the Stretch Tuning correct?

p. 35

The maximum simultaneous polyphony is 128 voices. If you are playing along with a song and making heavy use of the damper pedal, the number of notes the LX-10F is attempting to produce may exceed the maximum polyphony, meaning that some of the notes will drop out.

—

Sounds are heard twice (doubled) when the keyboard is played

The wrong instrument is selected when you press the [E. Piano], [Strings], or [Others] button

Is the LX-10F in Dual play?

p. 26

When the LX-10F is connected to an external sequencer, set the Local Control to off. Alternatively, the sequencer could be set so its Soft Thru feature is Off.

p. 68

Tone buttons [E. Piano] [Strings] [Others] also operate as buttons that select “Recommended Tones.”

With the factory settings, connecting a commercially-available CD-ROM drive to the external memory connector and selecting a song from a CD-ROM produced for the VIMA (VIMA TUNES) will automatically cause sounds appropriate for that song to be assigned to the [E. Piano], [Strings], and [Others] Tone buttons, so that you can select “recommended” sounds by pressing one of these buttons.

You can also make settings so that “recommended” sounds are not automatically assigned.

p. 63

Effect does not apply

Reverberation remains even if You defeat the

Reverb effect

When you are using Dual play or Split play, and different effects are specified for the two selected tones, the effect will not be applied to Tone 2 (when using Dual play) or the left-hand tone (when using Split play).

—

The LX-10F’s piano sound faithfully simulates the depth and resonance of an acoustic piano, and this may give the impression of reverberation even if you’ve defeated the Reverb effect.

Also, you may be able to eliminate some reverberation by reducing the value set for “Cabinet Resonance.”

—

The sound of the higher notes suddenly changes from a certain key

High-pitched ringing is heard

Low notes sound wrong, or are buzzy

On an acoustic piano, the approximately one and a half octaves of notes at the top of the keyboard will continue sounding regardless of the damper pedal. These notes also have a somewhat different tonal character. LX-10F faithfully simulate this characteristic of acoustic pianos. On the LX-10F, the range that is unaffected by the damper pedal will change according to the key transpose setting.

—


p. 14

If you hear this in headphones:

Piano sounds that have a brilliant and crisp character contain substantial high-frequency components that may sound as though a metallic ringing has been added. This is because the character of an actual piano is being faithfully reproduced, and is not a malfunction. This ringing is more obtrusive if the reverb effect is applied heavily, so you may be able to minimize it by decreasing the reverb.

If you don’t hear this in headphones:

It is likely that there is some other reason (such as resonances within the unit). Please contact your dealer or a nearby Roland service center.

—

If you set the volume to the maximum setting, the sound may be distorted depending on how you perform.

If this occurs, turn down the volume.

Alternatively, lower the master gain.

p. 17

p. 56

If you don’t hear this in headphones:

Performing at high volumes may cause the speakers or objects near the LX-10F to resonate. Fluorescent lights or glass doors may also resonate sympathetically. In particular, this is more likely to occur for lower notes and higher volumes. You can take the following measures to minimize resonances.

• Locate the speakers 10–15 cm away from walls or other surfaces.

• Keep the volume down.

• Move away from the objects that are resonating.

If you hear this in headphones:

It is likely that there is some other reason. Please contact your dealer or a nearby Roland service center.

—

72


Troubleshooting

Symptom

Song does not play correctly

Cause/Action

Song won’t play

Could the screen be indicating “OK to erase Song?”

You can’t play back an internal song if internal memory contains performance data you recorded. Erase the performance data you recorded before you play back the song.

Only the sound of a particular instrument in a song does not play

Could a track be muted?

If the button indicator is out, the music on that track is not heard. Press the track button so the indicator is illuminated.

Sound is heard from a muted track

Song volume is low

Could the track mute volume be set to other than “0”?

If you set this to “0,” the sound of a muted track will be completely inaudible.

Could the song volume be lowered?

Can’t play back a song saved in USB memory

Could the Audio files of the format be played?

Audio files of the following format can be played back.

• File extension “.WAV”

• 16-bit linear

• “44.1 kHz” sampling rate

Song tempo becomes unstable

Is the filename extension “MID”?

Files with other filename extensions cannot be handled as song data.

When playing a song from USB memory, the tempo may become unstable if there is an excessive amount of performance data.

The song name will not be shown if the song information in the file is empty or consists only of spaces.

Song name in USB memory is not shown

Is the filename extension “MID”?

Files with other filename extensions cannot be handled as song data.

Can’t record / play back

Page

P.43

p. 38

p. 56

p. 39

—

—

—

—

—

Can’t record

The recorded performance disappeared

Has one of the track buttons for recording been selected?

p. 48

p. 51

You cannot record audio files.

—

Your recorded performance will disappear if you switch off the LX-10F’s power or select a song.

There is no way to recover the lost performance. Before you turn off the power, save your recorded performance in internal Memory.

p. 44

Functions that cannot be used with audio file playback

•

Reverb (p. 25)

•

Saving to internal memory (p. 44)

•

Playback (muting) of individual parts (p. 38)

73


Error Messages

Indication

Error: 1

Error: 2

Error: 10

Error: 11

Error: 14

Error: 15

Error: 16

Error: 18

Error: 30

Error: 40

Error: 41

Error: 43

Error: 51

Error: 65

Meaning

You can only read the music file. It can not be saved.

An error occurred during writing.

The external media’s protect tab may be in the “Protect” (writing prohibited) position, or the external media may not yet be initialized.

No external media is inserted. Insert the external media and try again.

There is not sufficient free memory in the save destination.

Either insert other external media or delete unneeded files and try again.

An error occurred during reading. The external media may be corrupted.

Insert other external media and try again. Alternatively, you can initialize the external media.

The file is unreadable. The data format is not compatible with the LX-10F.

Data was not called up in time for playback of the song. After waiting several seconds, you may be able to play back the song by pressing the [ ] button again.

This audio format is not supported.

Please use 44.1 kHz 16-bit linear WAV format audio files.

The internal memory capacity of the LX-10F is full.

The LX-10F cannot deal with the excessive MIDI data sent from the external MIDI device.

Reduce the amount of MIDI data sent to the LX-10F.

A MIDI cable has been disconnected. Connect it properly and securely.

A MIDI transmission error has occurred. Check the MIDI cable and connected MIDI device.

There may be a problem with the system. Repeat the procedure from the beginning. If it is not solved after you have tried several times, contact the Roland service center.

The External Memory connector was subjected to excessive current. Make sure that there is no problem with the external media, then turn the power off, then on again.

* External Media: USB memory, Floppy Disk, CD-ROM, etc.

74


Tone List

E. Piano

11

12

13

14

15

7

8

9

10

5

6

3

4

No.

1

2

Piano

6

7

4

5

2

3

No.

1

8

9

10

11

Name

Grand Piano1

Piano + Str.

Harpsichord

Grand Piano2

Piano + Pad

Grand Piano3

MagicalPiano

Rock Piano

Piano+Choir

Honky-tonk

Coupled Hps.

Name

Pop E.Piano

Vintage EP

FM E. Piano

Vibraphone

EP Belle

Celesta

’60s E.Piano

Clav.

Mallet Isle

Morning Lite

Marimba

Stage Phaser

Ballad Bells

’70s E.Piano

E.Grand

Strings

6

7

4

5

2

3

No.

1

8

9

10

11

12

Name

Rich Strings

OrchestraStr

Orchestra

ChamberWinds

Harp

Violin

Velo Strings

Flute

Cello

OrchestraBrs

PizzicatoStr

DecayStrings *

* Tones indicated by “*” are suitable for playing layered with a piano tone.

Others

28

29

30

31

24

25

26

27

20

21

22

23

16

17

18

19

12

13

14

15

8

9

10

11

6

7

4

5

2

3

No.

1

35

36

37

38

32

33

34

GM2

39

40

41

42

STANDARD Set

ROOM Set

POWER Set

ELEC.Set

ANALOG Set

JAZZ Set

BRUSH Set

ORCH.Set

* 035–042 are drum sets.

43 SFX Set

Glass Pad

Angels Choir

Beauty Vox

Soft Pad

Female Aahs

Male Aahs

Thum Voice

Lunar Strngs

Decay Choir

Dcy ChoirPad

Nylon-str.Gt

Steel-str.Gt

Jazz Guitar

AcousticBass

A.Bass+Cymbl

FingeredBass

BrassSection

Alto Sax

Tenor Sax

Name

ChurchOrgan1

ChurchOrgan2

Combo Jz.Org

Ballad Organ

Accordion

Nason flt 8’

Gospel Spin

Full Stops

Mellow Bars

Light Organ

Lower Organ

’60s Organ

Aerial Choir

Jazz Scat

Harpvox

*

*

Detuned EP 2

St.FM EP

EP Legend

EP Phase

Harpsichord

Coupled Hps.

Harpsi.w

Harpsi.o

Clav.

Pulse Clav.

Celesta

Glockenspiel

Music Box

Vibraphone

Vibraphone w

Marimba

Name

Piano 1

Piano 1w

Piano 1d

Piano 2

Piano 2w

Piano 3

Piano 3w

Honky-tonk

Honky-tonk w

E.Piano 1

Detuned EP 1

Vintage EP

’60s E.Piano

E.Piano 2

Marimba w

Xylophone

TubularBells

Church Bell

Carillon

Santur

Organ 1

TremoloOrgan

’60s Organ

Organ 2

Perc.Organ 1

Chorus Organ

Perc.Organ 2

Rock Organ

Church Org.1

Church Org.2

70

71

72

73

66

67

68

69

62

63

64

65

58

59

60

61

54

55

56

57

50

51

52

53

46

47

48

49

No.

44

45

86

87

88

89

82

83

84

85

78

79

80

81

74

75

76

77

75


Tone List

76

Steel+Body

Jazz Guitar

Hawaiian Gt

Clean Guitar

Chorus Gt 1

Mid Tone Gt

Muted Guitar

Funk Guitar1

Funk Guitar2

Chorus Gt 2

Overdrive Gt

Guitar Pinch

DistortionGt

Gt Feedback1

Dist.Rtm Gt

Gt Harmonics

Name

Church Org.3

Reed Organ

Puff Organ

Accordion 1

Accordion 2

Harmonica

Bandoneon

Nylon-str.Gt

Ukulele

Nylon Gt o

Nylon Gt 2

Steel-str.Gt

12-str.Gt

Mandolin

Gt Feedback2

AcousticBass

FingeredBass

Finger Slap

Picked Bass

FretlessBass

Slap Bass 1

Slap Bass 2

Synth Bass 1

WarmSyn.Bass

Synth Bass 3

Clav.Bass

Hammer

Synth Bass 2

Synth Bass 4

RubberSyn.Bs

116

117

118

119

112

113

114

115

108

109

110

111

104

105

106

107

100

101

102

103

96

97

98

99

92

93

94

95

No.

90

91

132

133

134

135

128

129

130

131

124

125

126

127

120

121

122

123

Slow Strings

Syn.Strings1

Syn.Strings3

Syn.Strings2

Choir 1

Choir 2

Voice

Humming

Synth Voice

Analog Voice

OrchestraHit

Bass Hit

6th Hit

Euro Hit

Trumpet

Dark Trumpet

Name

Attack Pulse

Violin

Slow Violin

Viola

Cello

Contrabass

Tremolo Str.

PizzicatoStr

Harp

Yang Qin

Timpani

Strings

Orchestra

’60s Strings

Trombone 1

Trombone 2

Bright Tb

Tuba

MuteTrumpet1

MuteTrumpet2

French Horn1

French Horn2

Brass 1

Brass 2

Synth Brass1

Synth Brass3

AnalogBrass1

Jump Brass

Synth Brass2

Synth Brass4

162

163

164

165

158

159

160

161

154

155

156

157

150

151

152

153

146

147

148

149

142

143

144

145

138

139

140

141

No.

136

137

178

179

180

181

174

175

176

177

170

171

172

173

166

167

168

169

Shakuhachi

Whistle

Ocarina

Square Lead1

Square Lead2

Sine Lead

Saw Lead 1

Saw Lead 2

Doctor Solo

Natural Lead

SequencedSaw

Syn.Calliope

Chiffer Lead

Charang

Wire Lead

Solo Vox

Name

AnalogBrass2

Soprano Sax

Alto Sax

Tenor Sax

Baritone Sax

Oboe

English Horn

Bassoon

Clarinet

Piccolo

Flute

Recorder

Pan Flute

Bottle Blow

5th Saw Lead

Bass+Lead

Delayed Lead

Fantasia

Warm Pad

Sine Pad

Polysynth

Space Voice

Itopia

Bowed Glass

Metallic Pad

Halo Pad

Sweep Pad

Ice Rain

Soundtrack

Crystal

208

209

210

211

204

205

206

207

200

201

202

203

196

197

198

199

192

193

194

195

188

189

190

191

184

185

186

187

No.

182

183

224

225

226

227

220

221

222

223

216

217

218

219

212

213

214

215


Kalimba

Bagpipe

Fiddle

Shanai

Tinkle Bell

Agogo

Steel Drums

Woodblock

Castanets

Taiko

Concert BD

Melodic Tom1

Melodic Tom2

Synth Drum

TR-808 Tom

Elec.Perc.

Name

Synth Mallet

Atmosphere

Brightness

Goblins

Echo Drops

Echo Bell

Echo Pan

Star Theme

Sitar 1

Sitar 2

Banjo

Shamisen

Koto

Taisho Koto

Reverse Cym.

Gt FretNoise

Gt Cut Noise

BsStringSlap

Breath Noise

Fl.Key Click

Seashore

Rain

Thunder

Wind

Stream

Bubble

Bird 1

Dog

Horse Gallop

Bird 2

254

255

256

257

250

251

252

253

246

247

248

249

242

243

244

245

238

239

240

241

234

235

236

237

230

231

232

233

No.

228

229

270

271

272

273

266

267

268

269

262

263

264

265

258

259

260

261

Starship

Burst Noise

Applause

Laughing

Screaming

Punch

Heart Beat

Footsteps

Gun Shot

Machine Gun

Laser Gun

Explosion

Name

Telephone 1

Telephone 2

DoorCreaking

Door

Scratch

Wind Chimes

Helicopter

Car Engine

Car Stop

Car Pass

Car Crash

Siren

Train

Jetplane

292

293

294

295

288

289

290

291

296

297

298

299

284

285

286

287

280

281

282

283

276

277

278

279

No.

274

275

* In the tone group “Others” when you hold down the [-] or [+] button to switch tone in succession, the tones will stop changing at number 35 and number 44.

To select the next sound, release the

[-] or [+] button, then press it again.

Tone List

77


Internal Song List

Song Name

Polonaise op.53

Valse, op.34-1

Nocturne No.20

Die Forelle

Reflets dans l’Eau

My Pleasure (*)

La Fille aux Cheveux de Lin

La Campanella

Trio Grande (*)

Scherzo No.2

Étude, op.10-12

Sonate No.15

Liebesträume 3

Étude, op.10-3

Je te veux

Valse, op.64-1

Golliwog’s Cakewalk

Fantaisie-Impromptu

Arabesque 1

An der schönen, blauen Donau

Auf Flügeln des Gesanges

Mazurka No.5

Gymnopédie 1

Étude, op.25-1

Clair de Lune

Étude, op.10-5

Dr. Gradus ad Parnassum

Grande Valse Brillante

La prière d’une Vierge

Course en Troïka

To The Spring

Valse, op.64-2

Radetzky Marsch

Träumerei

Moments Musicaux 3

Prèlude, op.28-15

Harmonious Blacksmith

Ungarische Tänze 5

Türkischer Marsch

Nocturne No.2

Frühlingslied

Präludium

Jägerlied

Menuet Antique

Für Elise

27

28

29

30

23

24

25

26

19

20

21

22

15

16

17

18

11

12

13

14

7

8

9

10

5

6

3

4

No.

1

2

43

44

45

39

40

41

42

35

36

37

38

31

32

33

34

Composer

Fryderyk Franciszek Chopin



Franz Peter Schubert=Franz Liszt

Claude Achille Debussy

Masashi Hirashita


Franz Liszt

John Maul



Wolfgang Amadeus Mozart

Franz Liszt


Erik Satie





Johann Strauss, Sohn

Felix Mendelsshon


Erik Satie






Tekla Badarzewska

Peter Ilyich Tchaikovsky

Edvard Hagerup Grieg


Johann Baptist Strauss

Robert Alexander Schumann

Franz Peter Schubert


Georg Friedrich Händel

Johannes Brahms

Ludwig van Beethoven


Felix Mendelsshon

Johann Sebastian Bach

Felix Mendelsshon

Maurice Ravel


78

Song Name

Türkischer Marsch

Ständchen

Humoreske

Blumenlied

Alpenglöckchen

Menuett G dur

Venezianisches Gondellied

Alpenabendröte

Farewell to the Piano

Brautchor

Battle of Waterloo

Wiener Marsch

Le Coucou

Menuett G dur

Spinnerlied

Gavotte

Heidenröslein

Zigeuner Tanz

La Cinquantaine

Csikos Post

Dolly’s Dreaming Awakening

La Violette

Fröhlicher Landmann

Sonatine op.36-1

Sonatine op.20-1

Sonatine No.5

Late Night Chopin (*)

Fly Free (*)

L’éveil de l’amour (*)

72

73

74

68

69

70

71

64

65

66

67

60

61

62

63

56

57

58

59

52

53

54

55

48

49

50

51

No.

46

47

Composer

Wolfgang Amadeus Mozart

Franz Peter Schubert

Antonín Dvo řák

Gustav Lange

Theodor Oesten


Felix Mendelsshon

Theodor Oesten


Wilhelm Richard Wagner

Wilma Anderson-Gilman

Carl Czerny

Louis Claude Daquin

Johann Sebastian Bach

Albert Ellmenreich

François Joseph Gossec

Gustav Lange

Heinrich Lichner

Gabriel Marie

Hermann Necke

Theodor Oesten

Louis Streabbog

Robert Alexander Schumann

Muzio Clementi

Friedrich Kuhlau


John Maul

John Maul

Masashi Hirashita

* All rights reserved. Unauthorized use of this material for purposes other than private, personal enjoyment is a violation of applicable laws.

* No data for the music that is played will be output from MIDI Out.

* Songs marked by an asterisk (*) are original songs composed for the Roland Corporation. The copyrights to these songs are owned by the Roland Corporation.


Parameters Stored in Memory Backup

Parameter

Piano Designer Settings

Function Mode Settings

Other Settings

Lid

Master Tuning

Damper Resonance

Key Touch

Key Touch Offset

Hammer Noise

Hammer Response

Duplex Scale

String Resonance

Key Off Resonance

Cabinet Resonance

Damper Noise

Temperament (Temperament, Temperament Key)

Stretch Tuning

Brilliance

Equalizer (On/Off, Parameter Settings)

Dual Balance

Track Assign

Transpose Mode

Damper Pedal Part

MIDI Transmit Ch.

V-LINK Transmit Ch.

Lyrics

CD/Audio Type

Language

Reverb (On/Off, Depth)

Split Point

Twin Piano Mode

Settings stored immediately, whenever a change is made (Memory Backup procedure not needed)

USB Driver Setting

Ext. Memory Mode

p. 58

p. 68

p. 70

p. 58

p. 55

p. 56 p. 56

p. 57

p. 58 p. 58

p. 25

p. 31

p. 28

p. 35 p. 35 p. 35

p. 55

p. 35 p. 35 p. 35 p. 35

Page

p. 35 p. 35, p. 55 p. 35 p. 35, p. 54 p. 35 p. 35 p. 35

p. 69

p. 61

79


Music Files That the LX-10F Can Use

What Are Music Files?

Music files contains musical information such as how long the key for a corresponding pitch is played, the force applied to the key played, and other such information. When the performance data (music file) is sent by the USB memory or CD-ROM, the song will be played exactly as specified by the data. This is different than an audio CD, since the music file does not contain a recording of the sound itself. This makes it possible to change tempos and keys freely, allowing you to use it in many different ways.

Regarding Copyright

Use of the song data contained in the LX-10F or any other song data supplied with it for any purpose other than private, personal enjoyment without the permission of the copyright holder is prohibited by law. Additionally, this data must not be copied, nor used in a secondary copyrighted work without the permission of the copyright holder.

Please be aware that if you create derivative works that are based on existing copyrighted material, such as commercially available SMF music files, such works may violate copyright law if used for any purpose other than personal enjoyment. Roland takes no responsibility for any copyright violation you may commit by creating such works.

The LX-10F Allows You To Use the Following Music Files

VIMA TUNES

VIMA TUNES is a Roland specification for music files that contains image and lyric data, allowing you to enjoy songs with lyrics and images simultaneously. When data bearing the “VIMA TUNES” logo is played back on a device that bears the same logo, lyrics can be shown on the screen of a connected external display or television, letting you enjoy karaoke or watch a slide show.

* This instrument (LX-10F) is not able to play back VIMA TUNES images.

* You can specify whether the recommended tones will be assigned

automatically (p. 63).

SMF Music Files

SMFs (Standard MIDI Files) use a standard format for music file that was formulated so that files containing music file could be widely compatible, regardless of the manufacturer of the listening device.

An enormous variety of music is available, whether it be for listening, for practicing musical instruments, for Karaoke, etc.

SMF with Lyrics

“SMF with Lyrics” refers to SMF (Standard MIDI File) that contains the lyrics. When Music Files carrying the “ ” logo are played back on a compatible device (one bearing the same logo), the lyrics will appear in its display.

General MIDI

The General MIDI is a set of recommendations which seeks to provide a way to go beyond the limitations of proprietary designs, and standardize the MIDI capabilities of sound generating devices.

Sound generating devices and music files that meets the General

MIDI standard bears the General MIDI logo. Music files bearing the

General MIDI logo can be played back using any General MIDI sound generating unit to produce essentially the same musical performance.

General MIDI 2

The upwardly compatible General MIDI 2 recommendations pick up where the original General MIDI left off, offering enhanced expressive capabilities, and even greater compatibility. Issues that were not covered by the original General MIDI recommendations, such as how sounds are to be edited, and how effects should be handled, have now been precisely defined. Moreover, the available sounds have been expanded. General MIDI 2 compliant sound generators are capable of reliably playing back music files that carry either the General MIDI or General MIDI 2 logo.

In some cases, the conventional form of General MIDI, which does not include the new enhancements, is referred to as “General MIDI

1” as a way of distinguishing it from General MIDI 2.

GS Format

The GS Format is Roland’s set of specifications for standardizing the performance of sound generating devices. In addition to including support for everything defined by the General MIDI, the highly compatible GS Format additionally offers an expanded number of sounds, provides for the editing of sounds, and spells out many details for a wide range of extra features, including effects such as reverb and chorus. Designed with the future in mind, the GS Format can readily include new sounds and support new hardware features when they arrive. Since it is upwardly compatible with the General

MIDI, Roland’s GS Format is capable of reliably playing back GM

Scores equally as well as it performs GS music files (music files that have been created with the GS Format in mind).

XGlite

XG is a tone generator format of Yamaha Corporation, that defines the ways in which voices are expanded or edited and the structure and type of effects, in addition to the General MIDI 1 specification.

XGlite is a simplified version of XG tone generation format. You can play back any XG music files using an XGlite tone generator.

However, keep in mind that some music files may play back differently compared to the original files, due to the reduced set of control parameters and effects.

80


Main Specifications

LX-10F: Digital Piano

<Keyboard>

Keyboard

Touch Sensitivity

88 keys (PHA III Ivory Feel Keyboard with Escapement)

Touch: 100 levels, Fixed Touch

Hammer Response: 10 levels

Keyboard Mode Whole, Dual (volume balance adjustable), Split (split point adjustable), Twin Piano

<Sound Generator> Conforms to GM2/GS/XGlite

Piano Sound

Max. Polyphony

Tones

Temperament

Stretched Tuning

Master Tuning

Transpose

Effects

SuperNATURAL Piano Sound

128 voices

337 tones (including 8 drum sets, 1 SFX set)

8 types, selectable temperament Key

Preset, User tuning (adjustable in individual notes: -50.0– +50.0 cent), Off

415.3–466.2 Hz (adjustable in increments of 0.1 Hz)

Transpose: -6–+5 (in semitones)

Playback Transpose (with Audio CD/Audio File): -6–+5 (in semitones)

Reverb (Off, 1–10),

4-band Digital Equalizer

Only for Piano Tones:

Open/close lid (7 levels), Cabinet Resonance (Off, 10 levels), Hammer Noise (5 levels),

Damper Noise (Off, 10 levels), Duplex Scale (Off, 10 levels), Damper Resonance (Off, 10 levels),

String Resonance (Off, 10 levels), Key Off Resonance (Off, 10 levels)

Only for Organ Tones:

Rotary Speaker Effect (Slow/Fast)

<Recorder>

Tracks

Songs

Note Storage

Control

Tempo

Resolution

Metronome

3 tracks

Recorder section: 1 song

Internal Memory: Max. 99 songs

Approx. 30,000 notes

Song Select, Play/Stop, Rec, Rewinding, Fast-forwarding, Previous song, Next song, Track Mute, Mute Volume, Tempo,

Tempo Mute, All Songs Play, Count-in, Song Volume

Center Cancel (only for audio playback)

Quarter note = 10 to 500

Audio Playback Speed: 75–125%

120 ticks per quarter note

Beat: 2/2, 0/4, 2/4, 3/4, 4/4, 5/4, 6/4, 7/4, 3/8, 6/8, 9/8, 12/8

Volume: 10 levels

Metronome Pattern: 11 patterns

81


Main Specifications

<Internal Memory>

Songs

Storage format

<External Memory>

External Storage

Max. 99 songs

Standard MIDI Files (Format 0)

Types of data that can be played

USB Memory

Floppy Disk (when using an optional floppy disk drive)

Standard MIDI Files (Format 0/1)

Roland Original Format (i-Format)

Audio File (WAV 44.1 kHz / 16-bit Linear Format)

Audio CDs (CD-DA) (when using a CD drive)

Standard MIDI Files (Format 0) Storage format

<Others>

Internal Songs

Rated Power Output

Speakers

Display

Language

Lyrics

Control

Pedal

Other Function

Connectors

Power Consumption

Dimensions (including piano stand)

Weight (including piano stand)

Accessories

Options

74 songs

60 W x 2

16 cm x 2 (with Speaker box), (8 cm x 12 cm) x 2, 5 cm x 2

128 x 64 dots Graphic monochrome LCD (with backlit)

English, Japanese

Yes (Built-in Display)

Volume, LCD Contrast

Damper (Progressive Damper Action Pedal, capable of continuous detection),

Soft (capable of continuous detection, function assignable), Sostenuto (function assignable)

Panel Lock, V-LINK

AC inlet, Pedal connector, Input jacks (L/Mono, R), Output jacks (L/Mono, R), USB connector,

MIDI connectors (In, Out), Phones jack (Stereo) x 2, External Memory connector

140 W

1410 (W) x 446 (D) x 1070 (H) mm (with top lid close)

55-9/16 (W) x 17-9/16 (D) x 42-1/8 (H) inches

1410 (W) x 453 (D) x 1124 (H) mm (with top lid open)

55-9/16 (W) x 17-7/8 (D) x 44-1/4 (H) inches

93.6 kg/206 lbs 6 oz

Owner’s Manual, Power Cord, Roland 60 Classical Piano Masterpieces, Headphones Hook,

Cord Clamps (*1), Stabilizer (*1), Felt (*1)

Headphones, USB Memory, USB Floppy Disk Drive, USB CD Drive

(*1) Supplied with the stand

* In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.

82


Index

A

AC inlet ............................................................................................. 13

Adjuster ........................................................................................... 20

All Songs Play ................................................................................ 39

Arabic ............................................................................................... 36

Audio Equipment ......................................................................... 66

Audio file ......................................................................................... 73

B

Backward button .......................................................................... 12

Brilliance ............................................................................ 54–55, 79

button] ............................................................................................. 12

C

Cabinet Resonance ............................................................... 35, 79

CD drive ........................................................................................... 60

CD/Audio Type ................................................................ 54, 58, 79

Center Cancel ................................................................................ 63

Center Pedal Func ........................................................................ 54

Center/Left Pedal Func .............................................................. 58

Composer MIDI Out ............................................................. 54, 68

Computer ........................................................................................ 69

Connecting

Pedal cord ................................................................................ 14

Power cord .............................................................................. 14

Speaker cable ......................................................................... 14

Copy .................................................................................................. 65

Count-in ........................................................................................... 24

D

Damper Noise ......................................................................... 35, 79

Damper Pedal Part ......................................................... 54, 58, 79

Damper Resonance .............................................................. 35, 79

Delete ............................................................................................... 64

Deleting ........................................................................................... 46

Demo Songs ................................................................................... 19

Display .............................................................................................. 12

[Display Contrast] knob ............................................................. 13

Dual Balance .................................................................... 54, 56, 79

Dual Play .......................................................................................... 26

Duplex Scale .................................................................... 35–36, 79

E

Effects ............................................................................................... 25

Equal ................................................................................................. 36

Equalizer ............................................................................ 54–55, 79

Erasing .............................................................................................. 43

Ext. Memory Mode ........................................................ 54, 61, 79

External Memory connector .................................................... 13

F

Factory Reset .......................................................................... 54, 59

File Menu ......................................................................................... 54

Floppy disk drive .......................................................................... 60

Forward button ............................................................................. 12

[Function] button ......................................................................... 12

Function mode ............................................................................. 53

G

General MIDI ................................................................................... 80

General MIDI 2 ............................................................................... 80

Generic ............................................................................................. 69

GS Format ........................................................................................ 80

H

Hammer Noise ........................................................................ 35, 79

Hammer Response ................................................................ 35, 79

Headphone Hook ......................................................................... 18

Headphones ................................................................................... 18

I

Individual ......................................................................................... 28

Initializing ........................................................................................ 61

Input jack ......................................................................................... 13

J

Just Major ........................................................................................ 36

Just Minor ........................................................................................ 36

K

Key Off Resonance ................................................................ 35, 79

Key Touch .......................................................................... 35, 54, 79

Key Touch Offset .................................................................... 35, 79

Kirnberger ....................................................................................... 36

L

Language ........................................................................... 54, 58, 79

Left Pedal Func .............................................................................. 54

Lid ......................................................................................... 14, 35, 79

Local Control ........................................................................... 54, 68

Local Off ........................................................................................... 68

Local On ........................................................................................... 68

Lyrics ................................................................................... 54, 58, 79

M

Master Gain .............................................................................. 54, 56

Master Tuning .......................................................... 35, 54–55, 79

Meantone ........................................................................................ 36

Memory Backup ..................................................................... 54, 59

Metronome ..................................................................................... 22

[Metronome] button ................................................................... 13

Metronome Pattern .............................................................. 54, 57

MIDI ................................................................................................... 67

MIDI Out/In connector ................................................................ 13

MIDI sequencer ............................................................................. 67

MIDI Sound Module ..................................................................... 67

MIDI Transmit Ch. ........................................................... 54, 68, 79

Music Files ....................................................................................... 80

Mute Volume .......................................................................... 54, 56

Muting .............................................................................................. 38

N

Noise ................................................................................................. 35

83


Index

O

Octave Shift ............................................................................. 54, 57

Opening/Closing

Lid ............................................................................................... 14

Original ............................................................................................ 69

Output jack ..................................................................................... 13

P

Pair ..................................................................................................... 28

Panel Lock ....................................................................................... 33

Parts .................................................................................................. 38

Pedal connector .................................................................... 13–14

Pedal cord ....................................................................................... 14

Pedals ............................................................................................... 13

Phones jack .................................................................................... 13

Piano Designer .............................................................................. 34

[Piano Designer] button ............................................................ 12

Play/Stop button .......................................................................... 13

Playback Transpose .............................................................. 40, 63

Playing back ............................................................................ 37, 62

Power cord ..................................................................................... 14

[Power] switch ............................................................................... 13

Pythagorean .................................................................................. 36

R

[Rec] button ................................................................................... 13

Recommended Tone ........................................................... 54, 63

Recording ........................................................................................ 41

Reverb ....................................................................................... 25, 79

[Reverb] button ............................................................................ 12

Rewind button .............................................................................. 12

S

Save ................................................................................................... 64

Saving ............................................................................................... 44

SMF Music Files ............................................................................. 80

SMF with Lyrics ............................................................................. 80

[Song] (Tempo) button .............................................................. 12

Speaker cable ................................................................................ 14

Speaker connector ...................................................................... 14

Split Point ................................................................................. 31, 79

Stretch Tuning ............................................................................... 79

Stretched Tuning ......................................................................... 35

String Resonance .................................................................. 35, 79

T

Temperament ......................................................................... 35, 79

Temperament Key ................................................................ 35, 79

Temperaments .............................................................................. 36

Tempo ....................................................................................... 22, 40

Tempo Mute ........................................................................... 54, 57

Time Signature .............................................................................. 23

Tone button ................................................................................... 12

Track Assign ..................................................................... 54, 56, 79

Track button ................................................................................... 13

Tracks ................................................................................................ 38

[Transpose] button ...................................................................... 12

Transpose ........................................................................................ 32

84

Transpose Mode ............................................................. 54, 57, 79

Tuning .............................................................................................. 35

Twin Piano ....................................................................................... 27

[Twin Piano] button ..................................................................... 12

Twin Piano Mode ................................................................... 28, 79

U

USB connector ............................................................................... 13

USB Driver ................................................................................ 54, 69

USB Driver Setting ........................................................................ 79

USB Memory ................................................................................... 60

V

VIMA TUNES ................................................................................... 80

V-LINK ............................................................................................... 70

V-LINK Transmit Ch. ....................................................... 54, 70, 79

V-LINK Transmit Channel ........................................................... 70

[Volume] slider .............................................................................. 12

W

Werckmeister ................................................................................. 36

X

XGlite ................................................................................................. 80


For EU Countries

For China


This product complies with the requirements of EMCD 2004/108/EC and LVD 2006/95/EC.

For EU Countries

For the USA

FEDERAL COMMUNICATIONS COMMISSION

RADIO FREQUENCY INTERFERENCE STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Unauthorized changes or modification to this system can void the users authority to operate this equipment.

This equipment requires shielded interface cables in order to meet FCC class B Limit.

For Canada

NOTICE

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

AVIS

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

For C.A. US (Proposition 65)

WARNING

This product contains chemicals known to cause cancer, birth defects and other reproductive harm, including lead.

For the USA

DECLARATION OF CONFORMITY

Compliance Information Statement

Model Name :

Type of Equipment :

Responsible Party :

Address :

Telephone :

LX-10F

Digital Piano

Roland Corporation U.S.

5100 S. Eastern Avenue, Los Angeles, CA 90040-2938

(323) 890-3700

Information

AFRICA

EGYPT

Al Fanny Trading Offi ce

9, EBN Hagar Al Askalany Street,

ARD E1 Golf, Heliopolis,

Cairo 11341, EGYPT

TEL: (022)-417-1828

REUNION

MARCEL FO-YAM Sarl

25 Rue Jules Hermann,

Chaudron - BP79 97 491

Ste Clotilde Cedex,

REUNION ISLAND

TEL: (0262) 218-429

SOUTH AFRICA

T.O.M.S. Sound & Music (Pty)Ltd.

2 ASTRON ROAD DENVER

JOHANNESBURG ZA 2195,

SOUTH AFRICA

TEL: (011)417 3400

Paul Bothner(PTY)Ltd.

Royal Cape Park, Unit 24

Londonderry Road, Ottery 7800

Cape Town, SOUTH AFRICA

TEL: (021) 799 4900

ASIA

CHINA


Co.,Ltd.

5F. No.1500 Pingliang Road

Shanghai 200090, CHINA

TEL: (021) 5580-0800


Co.,Ltd.

(BEIJING OFFICE)

10F. No.18 3 Section Anhuaxili

Chaoyang District Beijing 100011

CHINA

TEL: (010) 6426-5050

HONG KONG

Tom Lee Music

11/F Silvercord Tower 1

30 Canton Rd

Tsimshatsui, Kowloon

Hong Kong

TEL: 825-2737-7688

Parsons Music Ltd.

8th Floor, Railway Plaza, 39

Chatham Road South, T.S.T,

Kowloon, HONG KONG

TEL: 2333 1863

INDIA

Rivera Digitec (India) Pvt. Ltd.

411, Nirman Kendra Mahalaxmi

Flats Compound Off . Dr. Edwin

Moses Road, Mumbai-400011,

INDIA

TEL: (022) 2493 9051

INDONESIA

PT Citra Intirama

Jl. Cideng Timur No. 15J-15O

Jakarta Pusat

INDONESIA

TEL: (021) 6324170

KOREA

Cosmos Corporation

1461-9, Seocho-Dong,

Seocho Ku, Seoul, KOREA

TEL: (02) 3486-8855

MALAYSIA

Roland Asia Pacifi c Sdn. Bhd.

45-1, Block C2, Jalan PJU 1/39,

Dataran Prima, 47301 Petaling

Jaya, Selangor, MALAYSIA

TEL: (03) 7805-3263

VIET NAM

VIET THUONG CORPORATION

386 CACH MANG THANG TAM ST.

DIST.3,

HO CHI MINH CITY

VIET NAM

TEL: (08) 9316540

CENTRAL/LATIN

AMERICA

EUROPE

MIDDLE EAST

NORTH AMERICA

As of Jan. 1,2010 (ROLAND)

* 5 1 0 0 0 1 3 6 1 9 0 1 *

No results