advertisement
102 Series IP Phone
User Manual
(firmware :V1.0.7.4)
Escene Communication
Escene Communication Co.Ltd
www.escene.cn/en/ http://ArtTel.ru
Tables of Contents
www.escene.cn/en/
Escene Communication http://ArtTel.ru
Escene Communication http://ArtTel.ru
www.escene.cn/en/
102 Series IPPhone
1. Getting Started
About
102 Series is a popular type IP Phone in SayHi phones Series, with modern design, functional, practical and voice clarity characteristics. It accomplished the powerful telephony features by cooperating with the communications platform, such as call transfer, hotline, third-party conferences, voice mail, interruption-free, etc.
Feature Highlights:
HD Voice: HD Codec
Support unified maintenance and auto upgrade
Enterprise Phone Book
Support Headset interface
Support PoE and AC power adapter
Support HTTP/TFTP/FTP Auto-provision/TR069 for upgrade software
Technical Features
Item
Screen grayscale LCD with background light
102
128*64 LCD, 4 display, 2.3 inch
Language
Line
Function Keys
Multi-Language (e.g.CN/EN/Spain/Portugal/Poland/Turkey/French/Italy etc.)
2 ,Light status: Coming call & Hold(Red flashing);Talking (Red)
5 Navigation keys (Arrow button, OK button)
Volume button(multiplex up and down keys)
Hands-free
Left soft key
Right soft key
Hold
Redial
Conference
Transfer
SIP 2.0
VoIP Protocol
Network Protocol HTTP, BOOTP, FTP, TFTP, IEEE 802.1Q, *IEEE 802.1X
Codec PCMA,PCMU, G.722 ,G.729 A,G.723.1(5.3Kb/s, 6.4Kb/s),iLBC www.escene.cn/en
Escene Communication http://ArtTel.ru
102 Series IPPhone
QoS
Network
Voice
Function APP
PBX
Application
Security
Management
Power Supply
TOS, Jiffer Buffer, VAD, CNG, G.168 (32ms)
2 × RJ45 10/100M Ethernet Interfaces (LAN/PC)
IP Assignment: static IP, DHCP, PPPoE
PC port support Bridge and Router
DNS SRV,STUN, VPN(L2TP), VLAN/QoS
STUN,DTMF(In-band/RFC2833/SIP INFO)
Hands-free model available by Full-duplex
Separated 9 Level Volume Adjustment
Always Forward, Busy Forward, No-answer Forward
Hotline line (Immediately/Delay)
Call Waiting, Call Queuing
Call Forward, Call Transfer, Call Holding, Call Pickup, *Callback
Redial
Phone DIRectory speed dial, Call record DIRect dial
3-way conference
DnD, Blacklist, SMS
Voice mail, Voice Prompt, Voice Message
P2P(Peer-to-Peer)
Call Transfer, Call Pick-Up, Network-Meeting, DND, Call Waiting, Call Hold.
Call Barring, Call Back On Busy, Anonymous Call ,Intercom, Paging
LDAP
Enterprise phone DIRectory, download with server, and it support 800 contacts
Public phone DIRectory
XML Phonebook : Search /Input/ Out put
Private phone DIRectory: input/output 300 contacts, every contact can save 3 numbers and the size of number is 19 byte.
Call History(600): every records is 200 with Miss Calls /Received
Calls/Dialed Calls.
Voice Message, Voice Mail Box, Light of Message.
Ringing Update, Input, Del,
*we also support to order the other APP.
Login the website by password
Login the LCD by password
Signaling encryption(RC4)
Media encryption(RC4)
VPN, 802.1X, VLAN QoS(802.1pq), *LLDP
TLS, MD5,AES, ROOT/USER Management
Upgrade: HTTP/TFTP/FTP Auto-provision/TR069
Configurations: Phone/Http/Auto provision/TR069
Debug: Telnet/Phone/Web
Keyboard Setting
Power adapter:AC100~240V input and DC 5V/1A output
PoE(IEEE 802.af) www.escene.cn/en
Escene Communication http://ArtTel.ru
102 Series IPPhone
Specification
DSPG Chipset
Storage Temperature: 0℃ ~ 60℃
Operating Humidity: 10%~90%
Size:210mm*175mm*70mm
Certifications
Net weight: 0.9kg
CE、FCC、RoHS、Avaya、Broadsoft、Alcatel、Yeastar、Digium、Metaswitch etc.
Note: “*” Sign means function has not been published yet.
Escene Communication http://ArtTel.ru
www.escene.cn/en
102 Series IPPhone
2. Connecting Your Phone
Your system administrator will likely connect your new 102 SERIES IP Phone to the corporate
IP telephony network. If that is not the case, refer to the graphic and table below to connect your phone.
1) Open the box of 102 SERIES IP Phone,carefully check the packing list as follow:
Item
IP Phone
Handset
Handset Cord
Counts
1
1
1
Power adapter
RJ45 cable
RJ11 cable
CD
Quick Installation
Quick User Guide
Product certification 1
1
1
1
1
1 (Phone with PoE without Power adapter)
1
2) As shown in figure 2.1 , please plug Handset Cord into RJ11 interfaces (IP Phone and
Handset),RJ45 cable into the LAN interface;IP Phone will automatically start if IP Phone with
POE function.
3) The phone must work together with power adapter without POE support.
4) If you want connect your computer into LAN at the same time, please connect your computer to PC interface of the phone with a RJ45 cable.
Figure2.1 Interfaces of 102 SERIES
PSTN
NOTE:PSTN feature is only in DS Series Model www.escene.cn/en
Escene Communication http://ArtTel.ru
102 Series IPPhone
3. Phone overview
Understanding Buttons and Hardware
You can identify buttons and hardware on your 102 SERIES from figure 3.1.
Figure 3.1 102 SERIES
1
2
3
4
5
Item
LCD Screem
Description
128*64 characters, grayscale LCD with background light
Menu button: which buttom make you enter the menu setting interface
Line button: 102 SERIES have two account ,one account have a corresponding line button .If the call coming or the line is used, the light will become red.
Received button: you can search the phone number which you have receive by press this button
Vol+ button: you can adjust the volume www.escene.cn/en
Escene Communication http://ArtTel.ru
12
13
6
7
8
9
10
0-9,*,#
11
102 Series IPPhone
Missed button: you can search the phone number which you have missed by press this button.
Dialed button: you can search the phone number whhich you hace dailed by press this button.
OK button: To confirm the action.
Basic Call Handling: press “#” send out a call by default.
Speaker button: Toggles the speakerphone on or off.
There button:
Conference button: Connect calling / called party
Transfer button:Transfer reDIRects a connected call.
Redial button: To dial the last number.
light : It will flash if a call come in
It will become red if you want to dail a phone number.
Blf button:
You can set four type on blf . there are speed dial, Asterisk
BLF,Speed Dial Prefix, DTMF.
Understanding Phone Screen Features
This is what your main phone screen might look like:
Figure 3.3 102 SERIES Phone LCD
Escene Communication http://ArtTel.ru
www.escene.cn/en
1
2
3
102 Series IPPhone
Screen displays
Date
Time
Line status
Functions
Show current date(You can set with different sources,the more
7. Web Setting)
Show current time(You can set with different sources,the more
7. Web Setting)
Show the phone line status:
1) : Disconnect into network.
2) : Only Peer-to-Peer call.
3) : Network connected normal, but the line is not successfully registered.
4) : Network is OK and the line is available.
5) : Line is turned on DND.
Escene Communication http://ArtTel.ru
www.escene.cn/en
102 Series IPPhone
4. Basic Call Handling
You can perform basic call-handling tasks using a range of features and services. Feature availability can vary; see your system administrator for more information.
Note: The bold type of the following text in table signifies the phone's button.
Placing a Call
Here are some easy ways to place a call on 102 SERIES IP Phone:
If you want to...
Then…
Place a call using the handset
Place a call using
Pick up the handset
Press Speaker button
--1) You can hear dial tone;
--2) Enter a number;
--3) Press # button (default),
-or wait 5s (default), then it send the number automatically.
a speakerphone
Redial -- press Navigation button-Right (in Standby interface) > “Dialed ”, select a number, and press Select .
Dial from a call --1) Press MENU or OK button > “Calls ”, you can select “Missed calls”, log “Received calls” and “Dialed numbers”,
- or press Navigation button (in Standby interface) > select “Missed ”
(down), “Received ” (left) and “numbers” (right) );
--2) Then press Select .
Tips
• You can dial on-hook, without a dial tone (pre-dial). To pre-dial, enter a number, and then go off-hook by lifting the handset or pressing Headset or Speaker button.
Answering a Call
You can answer a call by simply lifting the handset, or you can use other options if they are available on 102 SERIES.
www.escene.cn/en
Escene Communication http://ArtTel.ru
102 Series IPPhone
If you want to...
Answer with a handset
--1) Your phone ring;
--2) Light strip is Red and flashing;
Answer with the speakerphone
(Non-headset mode)
Auto-answer
Then...
--Pick up the handset
--Press Speaker button
--1) Press MENU or OK button > “Functions ” > “Auto answer”;
--2) Select “Enable”;
--3) Your phone answers incoming calls automatically after a few rings .
Tips
• Your system administrator configures Auto-answer to use either the speakerphone or a headset.
You might use Auto-answer if you receive a high volume of incoming calls.
Ending a Call
To end a call, hang up. Here are some more details.
If you want to...
Then...
Hang up while using the -- Return the handset to its cradle
Handset
Hang up while using the -- Press Speaker button speakerphone
Hang up while using the --Press Handset button, (Do not keep the headset mode)
Headset
Using Hold and Resume (Switch Calling Line)
You can hold and resume calls.
If you want to...
Then...
Escene Communication http://ArtTel.ru
www.escene.cn/en
Put a call on hold
Resume a call
Press HOLD button
Press line button which you have on hold
Tips
• Engaging the Hold feature typically generates music or a beeping tone.
102 Series IPPhone
Transfer Calls
Transfer reDIRects a connected call. The target is the number to which you want to transfer the call.
If you want to...
Then...
Talk to the transfer --1) Press TRANSFER button; recipient before transferring a call
--2) Enter number;
--3) press “#”(default) ,
-or wait five seconds(default)then transfer the call
(consult transfer)
Transferred to idle --1) Press TRANSFER button lines or other numbers --2) Press Blind; without talking to the transfer recipient
(Blind transfer)
--3) Enter number;
--4) Press “#”(default)
-or press Send, then transfer the call;
-or wait five seconds(default)then transfer the call
Do Not Disturb
You can use the Do Not Disturb(DND) feature to block incoming calls on your phone with a busy tone(Can also be set to their voice mail or other extension numbers, etc.).
If you want to...
Then...
Enable DND on a line --1) Press MENU or OK button > “Functions ” > “DND” > (select line) “Enable”
--2) All enabled line on the phone would changes to www.escene.cn/en
Escene Communication http://ArtTel.ru
Disable DND
102 Series IPPhone status.
Press MENU or OK button > “Functions” > “DND” >(select line)
“Disable”
3-way Conference
You can establish a three-party conference, during the conversation three phone parties can communicate with each other.
If you want to...
Then...
Invite the transfer --1) When the transfer recipient answer the call, press recipient into a CONFERCENCE button on your phone; conference in a --2) Then the held one, transfer recipient and you will be into a transferring conference.
Invite the third party --1) Press CONFERENCE button in an active call; into a conference in --2) Enter the third party number; a active call --3) After connected the third party, press CONFERENCE button again
Time & Date
If you want to...
Time & Date
Then...
--1) Press MENU or OK button > “Function setting” > “time & date”,
--2)you can select :
SNTP: select “enable ”to set parameter: time 、server 、daylight
SIP server: select “enable ” to set parameter: root can modify date .
manual Settings: select “enable ”to set parameter: date and time www.escene.cn/en
Escene Communication http://ArtTel.ru
102 Series IPPhone
VOIP Call Forwarding
If you want to...
Unconditional transfer
Then...
--1) Press MENU or OK button > “Function setting” > “voip call forwarding”;
--2)select “unconditional transfer”, select enable.
--3)input number which you want to transfer, when have a call in ,it will unconditional transfer.
Busy transfer
No answer transfer
--1) Press MENU or OK button > “Function setting” > “voip call forwarding”;
--2)select “busy transfer”, select enable.
--3) input number which you want to transfer, when have a call in conversation ,it will transfer.
--1) Press MENU or OK button > “Function setting” > “voip call forwarding”;
--2)select “no answer transfer”, select enable.
--3) input number which you want to transfer, when have a call in but you don’t have time to answer ,it will transfer.
Diagnose
If you want to see the phone status,Press MENU button > “view status” ,or press OK button > www.escene.cn/en
Escene Communication http://ArtTel.ru
102 Series IPPhone
“view status”, you can see the detail information of the phone.
If you want to ......
Then......
Network
Lines software
You can see the network detail information of the phone
You can see the SIP account
It include phone Mode、software version、kernel version、Upgrade date、Running time
Escene Communication http://ArtTel.ru
www.escene.cn/en
102 Series IPPhone
5. Advanced Call Handling
Using the Phone Book
You can store a large number of contacts in your phone's DIRectory. You can add, edit, delete, dial, or search for a contact in this DIRectory. However, it only can configure the phone book on web page in 102 SERIES. For details, you can refer to 7.Web Settings.
However, you can dial from Phone Book on the phone after setting phone book on web page.
If you want to… Then…
Add Contacts --1) Press Phone Book,
Add group
-or press MENU button > “Phone book”>“Personal phone book>View All”,
-or press OK button > “Phone book”>“Personal phone book>View
All”;
--2) Select “Add contact”, press OK button;
--3) Use the navigation keys to select content, press OK button to set and modify:
-Name: set the name of contact,
-NO.1-3: you can set up 3 contacts’ numbers,
-Group: the contacts be divided into different user’s groups
--4) Press Save soft key to complete
--1) Press DIR soft key,
-or press MENU button > “Phone book”>“Personal phone book>View All”,
-or press OK button > “Phone book”>“Personal phone book>View
All”;
--2) Select the “add group” then press OK button;
--3) Use the navigation keys to select content, press OK button to set and modify: www.escene.cn/en
Escene Communication http://ArtTel.ru
102 Series IPPhone
Modify group
Delete group
LDAP
-Group name: name of the group
--4) Press Save soft key to complete
--1) Press DIR soft key,
-or press MENU button > “Phone book”>“Personal phone book>View All”,
-or press OK button > “Phone book”>“Personal phone book>View
All”;
--2) Select the “Modify group” then press OK button ;
--3) Select the group you want to modify, press the OK button to set and modify, press Save to save the change
--1) Press DIR soft key,
-or press MENU button > “Phone book”>“Personal phone book>View All”,
-or press OK button > “Phone book”>“Personal phone book>View
All”;
--2) Select the “Delete group” or OK button;
--3) Select a group you want to delete, press OK button
View/Edit Contacts --1) Press DIR soft key,
-or press MENU button > “Phone book”>“Personal phone book”,
-or press OK button > “Phone book”>“Personal phone book”;
--2) Select “View ALL”,
-or select a contact who are belong to different group;
--3) Select the contact, press the OK button or Enter (to edit the contact’s information, press OK button )
--1) --1) Press DIR soft key,
-or press MENU button > “Phone book”
-or press OK button > “Phone book”
--2)Select “LDAP”, press the OK button.
--3)Select “Search name->name”, then input the name ,and press OK www.escene.cn/en
Escene Communication http://ArtTel.ru
102 Series IPPhone or Del.
--4)Select “Search number->Number”, then input the number ,and press OK or Del.
Pay attention: before you use LDAP function, you need to configure LDAP rule in the web configure page.
Call from phone --1) Press DIR soft key, book -or press MENU button > “Phone book”>“Personal phone book”,
-or press OK button > “Phone book”>“Personal phone book”;
--2) Select “View ALL”,
-or select a contact who are belong to different group;
--3) Select a contact, then press Dial,
(If there are multiple numbers of one contact, press Dial to enter the interface of “call options”, select the one you want to call and press
Dial)
Using Call Logs
Your phone maintains records of your missed, placed, and received calls.
If you want to… Then…
View your call logs --1) Press MENU button > “Calls > “Missed Calls”, “Received
Calls”, or “Dialed numbers”
--2) Use the navigation keys to view the call record information.
Dial from a call log Please refer to the previous part 4.Basic call handing – Placing a call.
Tips
• Each call log store up to 20 entries on 102 SERIES IP phone.
www.escene.cn/en
Escene Communication http://ArtTel.ru
102 Series IPPhone
6. Keypad Instruction
Series IP phones are can be configured in two ways. The first you can use the phone keypad where you can settings for you IP phones, the other you can log in to User Options web pages where you can settings for you IP phones.
Use phone keypad to setting. Press MENU or OK button to the main menu, Use the navigation keys to select menu, press OK button to confirm menu selections, press back button or cancel button to delete input information.
NOTEs: If the phone didn't have the MENU or other soft keys. Pls don't be your mind, because sometimes it only in other series, like 320/330 series etc. When you want to type “.” in setting IP address with keypad, you can press * button.
SIP Account Settings
102 SERIES Series IP phone make calls based on sip accounts, 102 SERIES Series IP phones can support 2 independent SIP account, Each account can be configured to different SIP server.
If you want to… Then...
Create an SIP account --1) Select “Settings” > “Advanced settings”;
--2) Enter the password required(The default is empty) ;
--3) Select “SIP” > “Account sip”;
--4) Select one of the account you want to setting, you can configure the following parameters
-Enable account*: Select Enable
-Account Mode: the type of account
-Display Name: The name displayed on the screen
-User Name*: the account matched with the SIP server.(extension number) ,
-Authen usr: the Authenticated users matched with the SIP server.
( The default With the same account)
-user pwd*: the user password matched with the SIP server
-Description: description of this account,
-SIP1*: the primary SIP server, By default all calls through the www.escene.cn/en
Escene Communication http://ArtTel.ru
Disable sip account
102 Series IPPhone server,
-SIP2: the secondary SIP , When the primary server is unavailable ,use the SIP server
-Refresh time: Registration refresh interval, the minimum value is
20 The default value is 3600.
-Con type: which protocol the phone used to send the voip packets
-Amount of used lines: Maximum line are allowed to used
--5) Set up the above parameters, select “Submit changes” to saves settings, Complete the account creation.
--1) Select “Settings” > “Advanced setting”;
--2) Enter the password required(The default is empty) ;
--3) Select “SIP” > “Account sip”;
--4) Select “Enable account” > “Disable”;
--5) Select “Submit changes” to saves settings
Network Setting
If you want to … network setting
Then…
--1) Select “Settings” > “Advanced settings”;
--2) Enter the password required(The default is empty) ;
--3) Select “Network”, you can configure the following parameters:
-Type: static IP 、 DHCP 、PPOE
- DNS1: enter IP address of the primary DNS server
- DNS2: enter IP address of the secondary DNS server
-Web port: the default Web port is 80,if you change it(for example change it to 88),you must use IP and Web port to login the web page (for example http://192.168.0.200:88).It will take effect on next reboot.
-Telnet port: the default Telnet port is 23, if you change it (for example change it to 2003), you must use IP and Telnet port to login the www.escene.cn/en
Escene Communication http://ArtTel.ru
102 Series IPPhone manage page (for example telnet 192.168.0.200:2003).It will take effect on next reboot.
Load default settings
If you want to...
Load default settings
Then...
--1) Choose “System settings” > “Advanced settings”;
--2) Enter the password required(The default is empty) ;
--3) Choose “load default settings ”,and press
“OK”, then “Reboot” the phone.
Modify password
If you want to...
Modify password
Then...
-1) Choose “System settings” > “Advanced settings”;
-2) Enter the password required(The default is empty) ;
--3) Choose “modify password ”,then input
“old password ,new password to change
“Advanced password” to login IP phone
Customizing Rings and Volume
If you want to… Then…
Change the ring --1) Select “Settings” > “Phone settings” > “Ring type”; tone --2) Press navigation to Select ring tone
Adjust the volume --1) Select “Settings” > “Phone settings” > “Volume settings” www.escene.cn/en
Escene Communication http://ArtTel.ru
level
102 Series IPPhone
--2) You can adjust the volume level of following types
-Ring volume: Phone call ring volume,
-Handset volume: Handle output volume,
-Handset mic volume: Handle input volume,
-Speaker volume: Hands-free speaker output volume,
-Speaker mic volume: Hands-free input volume,
-Headset volume: Headphone output volume,
-Headset mic volume: Headset microphone input volume
WIFI setting(
only WS102N has this item
)
If you want to…
Set WIFI
This…
--1)Choose "System settings">"advanced settings">"advanced password:"
--2) Press navigation to choose WIFI setting;
--3)Press "ok" button
-Current site: the wifi which the phone use now
-Site list: where you can choose wifi
--4)Press "site list", choose one wifi network which the phone searched
-SSID: SSID name
-BSSID: the mac address of the WIFI network
-Channel:the channel of the WIFI network use
-Type:the type of the WIFI network
-Encrypt:the encrypt of the WIFI network
-Signal:the signal of the WIFI network
--5)Press "SSID",set WIFI which you choose
-Encryption: the encryption of the WIFI network
-Key type: the key type of the WIFI network
-Key: the password which you should set to allow yourself to enter the WIFI network www.escene.cn/en
Escene Communication http://ArtTel.ru
21 102 SERIES IPPhone
7. Web Settings
We can configure IP Phone more handy through web setting. Press OK button on the keypad of the phone to enter the status page and find out the IP address of IP phone. Enter it (for example http://192.168.0.200) into the address bar of web browser. The default login name and password are both “root”.
Config Guide
You can finish the base configration step-by-step by this guide.
When press ‘next’,you can configure the Network parameters for the phone, www.escene.cn/en
Escene Communication http://ArtTel.ru
22 102 SERIES IPPhone
After config the network parameter,press next,then you can config sip account for the phone.
Press Finish, the base configuration of the phone is complete, now you can use the phone to call with sip.
www.escene.cn/en
Escene Communication http://ArtTel.ru
23
WIFI Setting(
only WS102N has this item
)
you can config the WIFI parameters for the phone on the web page.
102 SERIES IPPhone
If you want to search the site, you can click the .
Choose anyone site and you will see,
Escene Communication http://ArtTel.ru
www.escene.cn/en
24
WIFI Status(
only WS102N has this item
)
You can know what the status of the WIFI from this function.
102 SERIES IPPhone
Escene Communication http://ArtTel.ru
www.escene.cn/en
25
Network
You can config the network parameters for the phone on the web page.
102 SERIES IPPhone
Choose network, you will find the following parameters:
DHCP
Field
IP Address
Description
Config the phone get ip info from DHCP server
Config the ip manual for phone
Netmask
Gateway
Username (pppoe)
Password (pppoe)
MTU (pppoe)
Primary DNS
Secondary
MAC Address
Config the netmask manual for phone
Config the gateway manual for phone
The pppoe username
The pppoe password
The mtu for pppoe,default is 1500
The primary DNS server
The secondary DNS server
Display the MAC of the phone www.escene.cn/en
Escene Communication http://ArtTel.ru
26
HTTP Port
Telnet Port
102 SERIES IPPhone
The default web port is 80,if you change it(for example change it to88),
You must use IP and Web port to login the web page(for example http://192.168.0.200:88 ). It will take effect on next reboot.
the default Telnet port is 23,if you change it(for example change it to
2003),you must use IP and Telnet port to login the manage page (for example telnet 192.168.0.200:2003).It will take effect on next reboot.
PC Port
Normally choose Bridge, if you choose Router ,you need to input router IP address ,net mask. and also if you want to make a DHCP in this phone, you can follow the info and input the information.
SIP Account
The phone attempts to register to the SIP server using the account/registrar data provided by the automatic or manual initialization.
Escene Communication http://ArtTel.ru
www.escene.cn/en
27 102 SERIES IPPhone
Escene Communication http://ArtTel.ru
www.escene.cn/en
28 102 SERIES IPPhone
Choose one Account, you will find the following parameters:
Field
SIP Setting
Enable
Account Mode
Description
You can choose on/off to enable/disable the line.
You can choose VOIP/PSTN, but this model un-support PSTN, If you want to, Pls contact us or buy another model.
Display Name It is showed as Caller ID when making a phone call
Username
Authenticate Name
Password
It is a username provide by SIP Server
It is authenticated ID for authentication
It is a password provide by SIP Server
Label
SIP Server
Label with this account.
Server for registration, provided by administrator
Secondary server When the main server can't work, it also can register in this secondary server.
Outbound Proxy Server Put into the address with the outbound proxy server.
Secondary Outbound
Proxy Server
Poling Interval Time Of
Registration
NAT Traversal
When the main out bound server can't work, it also can use this secondary server.
Poling Interval Time Of Registration, default is 32 s.
Defines the STUN server will be active or not www.escene.cn/en
Escene Communication http://ArtTel.ru
29 102 SERIES IPPhone
STUN Server
BLA
BLA Number
Call Method
Session traversal utilities for NAT.
Share with the line.
BLA Number
This method include SIP and TEL.
Subscribe Period Subscribe expire time.
Register Expire Time IP phone automatically registered every time
DNS-SRV Enable/Disable DNS-SRV.
SIP Transport
Call
There are UDP/TCP/TLS three options
Amount Of Line
Account Used
Do Not Disturb
Anonymous Call
Rejection
Use Session Timer
The line key of account used, default is 2
Enable/Disable Do Not Disturb
Enable/Disable anonymous call.
Session Timer
Allow-events
Registered NAT
Ring Type
UDP Keep-alive
Message
UDP Keep-alive
Interval
Enable/Disable refresh session function. The device will send an Invite packet to refresh the session during a call if it enable.
The refresh session time interval.
Enable/Disable Allow-events.
Enable/Disable Registered to NAT
Set ringing type for current account.
The phone periodically sends a UDP packet to keep the port active and to avoid the server to shut down the port
Default is 30 second.
Security
SIP Encryption
RTP Encryption
Enable/Disable SIP encryption.
Enable/Disable RTP encryption.
Encryption Algorithm The encryption algorithm at this time we only have RC4.
Encryption Key
RTP Port Range
The key with encryption.
The port range with RTP.
Programmable Keys
Memory Keys: You can select the features what you want to. It can help you quickly to dial or operating. These features include Speed Dial/ Speed Dial Prefix/ DTMF/ BLF/ BLA/ Paging/ Call
Park/ Intercom.
www.escene.cn/en
Escene Communication http://ArtTel.ru
30 102 SERIES IPPhone
Line Keys: If you do not need more of the lines to use. you can change it to other features, like
Speed Dial/ Speed Dial Prefix/ DTMF/ BLF/ BLA/ Paging/ Call Park/ Intercom.
Function Keys: If you do not like the default setting with the function keys feature. You can change it options to what you like or normal use.
NOTE: IF THE PHONE WITHOUT THE KEY, YOU DO NOT NEED TO SET THE KEY.
www.escene.cn/en
Escene Communication http://ArtTel.ru
31 102 SERIES IPPhone
Soft Keys: Soft keys is the key with below display in the LCD. You can change it for your mind to the other features in many all kinds of status.
NOTE: In this US Series, it just have two soft keys, so it only can work with one and two feature.
The three and four is other Series IP phone, e.g. ES320N/ES330N etc.
Audio
The IP phone supports the following voice codecs: G.722, G.711A, G.711U, G.723, and G.729A.
You can enable/disable the desired codecs via Web interface. Please contact your system administrator for more details about the codecs.
To enable/disable the codecs:
1) Choose Audio-> Audio Codecs www.escene.cn/en
Escene Communication http://ArtTel.ru
32 102 SERIES IPPhone
2) Use the navigation keys to highlight the desired one in the Enabled/Disable Codecs list, and press the / to move to the other list.
3) Choose Submit to save the change.
Of course, you can control the voice bulk in this choose.
Phone Book
Group
You can add, edit and delete group in a phone book on web page of 102 SERIES.
www.escene.cn/en
Escene Communication http://ArtTel.ru
33
1) Click “PhoneBook” > “Group”,
102 SERIES IPPhone
If you want to add a Group, you just ought to click ‘Add Group’ .
You can edit an existed Group by click .
You can delete an existed Group by click , if you want to delete all Groups, you just ought to click ’Delete All Group’.
2) When you add a group or edit an existed group, you can set several parameters as follow:
Group
ID
Description
Group Name
Serial number of a group
Description of a group
Name of a group
Contact
You can add, edit and delete contact in a phone book on web page of 102 SERIES.
The phonebook can storage 300 contact entry.
1) Click “PhoneBook” > “Contact”,
If you want to add a Group, you just ought to click ‘Add Contact’.
You can edit an existed Contact by click .
You can delete an existed Contact by click , if you want to delete all Contacts, you just ought to click ’Delete All Contact’.
2) When you add a Contact or edit an existed Contact, you can set several parameters as follow:
Contact
Serial Number
First Name
Serial number of a contact
The First Name of a contact
Last Name The Last Name of a contact www.escene.cn/en
Escene Communication http://ArtTel.ru
34
Mobile Number
Office Number
OtherNumber
Group
Account
102 SERIES IPPhone
The Number1 phone number of a contact
The Number2 phone number of a contact
The Number3 phone number of a contact
You can assign a contact to a specific group. If there isn’t any group set on the phone, the group is None by default.
Select a SIP account relating this contact, that is you can dial to the contact from this SIP account.
LDAP
1).
Overview
LDAP stands for Lightweight DIRectory Access Protocol which is a client-server protocol for accessing a DIRectory service. LDAP lets you locate organizations, individuals, and other resources such as files and devices in a network, whether on the Internet or on a corporate intranet, and whether or not you know the domain name, IP address, or geographic whereabouts.
An LDAP DIRectory can be distributed among many servers on a network, then replicated and synchronized regularly.
2).
Configuration
Please note that LDAP Phonebook support on ES620\ES410\ES330\ES320\ES310\ES210, the version must be V2.2.3.1-2210 and higher, then access to the web “PhoneBook>LDAP page, you can find the configured option is like following picture. the detail configure in the appendix.
Escene Communication http://ArtTel.ru
www.escene.cn/en
35 102 SERIES IPPhone
BanList
You can add, edit and delete banlist in a phone book on web page of 102 SERIES..
1) Click “PhoneBook” > “BanList”,
If you want to add a BanList, you just ought to click ‘Add BanList’.
You can edit an existed BanList by click .
You can delete an existed BanList by click , if you want to delete all BanLists, you just ought to click ’Delete All BanList’.
2) When you add a BanList or edit an existed BanList, you can set several parameters as follow:
BanList
Serial Number Serial number of a BanList www.escene.cn/en
Escene Communication http://ArtTel.ru
36
Description
First Name
Last Name
Mobile Number
Home Number
Office Number
Account
102 SERIES IPPhone
Description of a BanList
The First Name of a ban contact
The Last Name of a ban contact
The number1 phone number of a ban contact
The number2 phone number of a ban contact
The number3 phone number of a ban contact
Select a SIP account relating this ban contact, that is the ban contact can’t dial to this SIP account.
Enterprise Phonebook
You can download Enterprise Phonebook from this web interface. But you should do second develop on the sip server to enable this function completely.
If the sip server no add some function to hold this option ,this option can be userd.
Advance
Phone Setting
You can use phone setting to set the time,qos,port Mirroring for the phone.
www.escene.cn/en
Escene Communication http://ArtTel.ru
37 102 SERIES IPPhone
Escene Communication http://ArtTel.ru
www.escene.cn/en
38 102 SERIES IPPhone
When used Phone Setting option, you can set several parameters as follow:
Phone Setting
Basic
Called No Answer Time When it has coming call and enable this feature, the caller will be request time out in the stipulated time.
DTMF The DTMF transmitted mode, include RFC2833,Inband,SIP Info,
Auto
Pound Send Method
RFC 2833 Pay Load
When you to use the code looks like #28#123 or %23123, you need to setting this feature.
Default is 101, RTP Payload for DTMF Digits, Telephony Tones and
Telephony Signals
Back Light
Key Board Lock
The backlight of the phone LCD
Lock with the phone LCD, when you enable the right password, it will auto disable this feature. if you want to use again, you need to open it again in the web management. Tips: the password is the same with the phone LCD. Default is empty. The Menu key can www.escene.cn/en
Escene Communication http://ArtTel.ru
39 102 SERIES IPPhone open it.
[Menu Key]: only lock the Menu function, others can normal work.
[Function Keys]: include Menu/Redial/Transfer/Hold etc. you just can use the number keys and speaker key.
[All keys]: as the name implies.
[Lock & Answer]: Auto open Auto-answer and lock the keys,
PSTN Setting [If your phone does not support PSTN feature, you can ignore this option]
PSTN Ring Type You can set the ringing type use PSTN or VOIP.
PSTN Prefix Code Input the prefix code with PSTN
Input the prefix code with VOIP
Setting the frequency with hook.
VOIP Prefix Code
Hook Frequency
QoS
Sip QoS
Voice QoS
Call
The range is 0~63,default is 26
The range is 0~63,default is 46
Hot Line Function
Hot Number
Call Waiting
It include Immediately Hot Line and Delay Hot Line
Input the number what you want to.
When someone is coming a call after the call is talking, the second call will be in the queue.
Select the frequency with the tone call waiting.
Call Waiting Tone
Auto Answer
Auto Answer Mode
Pickup Function
Pickup Code
Message
Fuzzy Search
Booking Voice Mail
Auto-answer the coming call, it also can set with group.
Include Hands Free / Handle / Headset.
Someone can pickup you call when you talking with some body.
The code with someone want to pickup your call.
The code with voice message.
Fuzzy search someone with the phone book in the idle.
Open this feature, the phone light(Message) will be bright when it get message.
Open this feature, it will be ringing when it get message.
Turn on or off the display with Miss call in the phone LCD.
Save the call list into the phone.
Play Voice Mail Tone
Miss Call Display
Call List Save
DND Soft key
Play Hang up Tone
Return
Refuse
Code When
Display or not in the LCD.
The tone with hang up in busy.
Transfer Code The code with transfer.
Conference Exit Result Conference originator hang up the phone, hang up two ways of it.
Select the code you want to with the server.
Select the code you want to with the server.
Return Code When
DND
Flash hook time
VOIP Call Forward
All ways
The time with the flash hook.
All ways transfer the call to others.
www.escene.cn/en
Escene Communication http://ArtTel.ru
40 102 SERIES IPPhone
If busy
If No Answer
Ring Frequency
Set Time Mode
Set Time Mode
If the phone was busy working, the call will be transfer to others.
If the phone was no answer, the call will be transfer to others.
The ring frequency with the VOIP Call Forward.
The mode of set time for phone,include SNTP/SIP
Server/PSTN/Manual
SNTP Server
Update Interval
Daylight Saving Time
Mode
Time Format
Date Format
Time Zone-GMT
Manual Setting
Manual Setting
Other
QoS
Check When Upgrade
Software
BLF Light
Headset Mode
Ring Type On Seat
Mode
Network
Mirroring
Packet
You can select in the list or input owner server address.
The update interval with SNTP.
Enable/disable the DST for the phone
You can use 24 hour time format or 12 hour time format
Normal format with date you can select in the list.
You can select different time zone for the phone
This used to manual set time for the phone
The QoS priority, support diff-server and precedence
Checking the upgrade software with MD5.
The light switch with BLF.
Select headset mode with normal or seat.
Select ring type mode with headset or speaker.
When select on, then you can capture the phone’s packet use notebook which connect to pc port of the phone
VLAN Setting
You can add the phone and PC to different VLAN used VLAN Setting option.
www.escene.cn/en
Escene Communication http://ArtTel.ru
41 102 SERIES IPPhone
When used VLAN Setting option, you can set several parameters as follow:
VLAN Setting
Enable VLAN You can enable/disable vlan for phone and pc
VID
[LAN/PC Port]
The VLAN you want the phone or pc to join
VPN Setting
IF you need to setup a VPN Setting, you should fill below options.
When used VPN Setting option, you can set several parameters as follow:
VLAN Setting
Enable VPN
VPN Type:
You can enable/disable VPN for phone and pc
There is one choose you can choice.
VPN Server Addr
VPN User Name
VPN Password
VPN server's ip
VPN user's name
A password be used for authentication
Dial Plan setting
If you want to setup a dial plan, you can click "Dial Plan".
Click "add rule" to entry this interface.
Escene Communication http://ArtTel.ru
www.escene.cn/en
42 102 SERIES IPPhone
Dial Plan Setting
ID
IP prefix
Dial Plan ID
The ip of a phone which you want to call
The number which you need to press actually if you want to call the phone
There have two option, Enable or Disable.
Called
Number
Position
Insert
Which position you want insert the number
Number
Called Delete
What number you want to insert
There have two option, Enable or Disable.
Number
(Note: When you want to add code and delete at the same time, you can add code first, after that base on the number you add, decide the position and length of the delete code.)
IP Strategy
You can use IP Strategy feature to make a list which line you want to allow make a call for your.
e.g. As following picture you can see it has 192.168.0.248 in the list. When you open this feature.
It means you just allow come from this IP address meeting www.escene.cn/en
Escene Communication http://ArtTel.ru
43
Global SIP
You also can setup the SIP server on Global SIP.
102 SERIES IPPhone
Phone Maintenance
Log
If you need to catch a debugging Level log, you need setup on this interface.
www.escene.cn/en
Escene Communication http://ArtTel.ru
44 102 SERIES IPPhone
You can change the password used to login phone GUI in Password option.
In Password option, you can set several parameters as follow:
Password
Username The login username of the web page
Old Password
New Password
Confirm Password
Administrator
User
The old password used to login of the web page
The new password used to login of the web page
The new password used to login of the web page
Login phone web page used administrator privileged
Login phone web page used general user privileged
Default Setting
You can load the phone to the factory default setting in default setting option.
www.escene.cn/en
Escene Communication http://ArtTel.ru
45 102 SERIES IPPhone
Press the ‘Reset to Factory Setting’ option, the phone will load to factory default setting on next reboot.
Auto Provision
When you open the auto provision function, the phone will auto provision if the phone detect a higher software or kernel which are put on the software server. The detail information about auto provision you can see the appendix.
Escene Communication http://ArtTel.ru
www.escene.cn/en
46 102 SERIES IPPhone
When use auto provision, you can set several parameters as follow:
Auto Provision
Auto Provision
Protocol
Software Server URL
You can enable/disable auto provision by select on/off
The protocol use for auto provision, it include tftp/http/ftp
The server address of the auto provision
Username
Password
Auto Download Software
Auto Download Kernel
The username provide by provision server
The password provide by provision server
This used to auto download software from server
This used to auto download kernel from server
Auto Download Config File This used to auto download config file from server
Broadsoft Compatiblity This used to compatible the broadsoft format’s config file
Auto Download Expansion Expansion must the phone support this feature. You can make sure or not the phone model is it support with "P", eg.
ES320N-P
Auto Download Enterprise This used to auto download Enterprise Phonebook from server www.escene.cn/en
Escene Communication http://ArtTel.ru
47 102 SERIES IPPhone
Phonebook
Auto Download Personal
Phonebook
Booting Checked
Disable the phone while booting checking
Auto Provision Frequency
Auto Provision Time
Auto Provision Next Time
AES Enable
AES Key
Auto Provision Now
This used to auto download personal phonebook from server
This used to checked the auto provision when phone booting
Off or On
This used to set the time interval for auto provision
This used to the specific time for auto provision
Reset the Auto Provision Next Upgrading time.
You can enable/disable AES encrypt for auto provision
The key of the AES
This used to do auto provision immediately
TR069
When the telegraphy want to test IMS, you can use this function.
FTP Upgrade
You can upgrade the software, kernel and configure file for the phone use ftp.
www.escene.cn/en
Escene Communication http://ArtTel.ru
48 102 SERIES IPPhone
When use ftp upgrade, you can set several parameters as follow:
FTP Upgrade
Server IP
Filename
Username
The ip address of the ftp server
The name of the file want to download from ftp server
The username provide by ftp server
Password
Software Upgrade
Kernel Upgrade
Configuration
Phone Book
EXT Module
The password provide by ftp server
Used to upgrade the software of the phone
Used to upgrade the kernel of the phone
You can used update/backup to update/backup the configure file of the phone
You can used update/backup to update/backup the phonebook of the phone
You can used update/backup to update/backup the expansion of the phone
TFTP Upgrade
You can upgrade the software, kernel and configure file for the phone use tftp.
www.escene.cn/en
Escene Communication http://ArtTel.ru
49 102 SERIES IPPhone
When use tftp upgrade, you can set several parameters as follow:
TFTP Upgrade
Server IP
Filename
Software Upgrade
The ip address of the tftp server
The name of the file want to download from ftp server
Used to upgrade the software of the phone
Kernel Upgrade
Configuration
Phone Book
EXT Module
Used to upgrade the kernel of the phone
You can used update/backup to update/backup the configure file of the phone
You can used update/backup to update/backup the phonebook of the phone
You can used update/backup to update/backup the expansion of the phone
HTTP Upgrade
You can upgrade the software, kernel and configure file for the phone use http.
www.escene.cn/en
Escene Communication http://ArtTel.ru
50 102 SERIES IPPhone
When use http upgrade, you can set several parameters as follow:
HTTP Upgrade
Select a File Browse the software/kernel/config file you want to upgrade from http
Software Upgrade
Kernel Upgrade
Configuration
XML Phone Book
VCARD
EXT Module
Log
All Config File
Used to upgrade the software of the phone
Used to upgrade the kernel of the phone
You can used upload/download to upload/download the configure file of the phone
You can used upload/download to upload/download the phonebook of the phone
One of the format with Phone book
You can used update/backup to update/backup the expansion of the phone
Debugging with IP phone
Include Phone Book/ Config / Extern / Log/ Enterprise Phone Book
Reboot
You can use reboot option to reboot the phone.
Escene Communication http://ArtTel.ru
www.escene.cn/en
51 102 SERIES IPPhone
When you press ‘Reboot’, the phone will reboot.
Phone Status
You can see the currently status of the phone when use Phone Status option.
Escene Communication http://ArtTel.ru
www.escene.cn/en
52
System Info
You can see the system information when used System Info option.
102 SERIES IPPhone
Attention:
On this interface ,you can see the software and kernel which we used for test and this user_manual is written base on this software and kernel.
This software version is V1.0.7.4-3459
This kernel version is v2.6.4
About
You can see the phone model when used About option.
Escene Communication http://ArtTel.ru
www.escene.cn/en
53
Appendix:
102 SERIES IPPhone
Configuration files on TFTP/HTTP/HTTPS/FTP Server
Name of configuration file:
The configuration file on the provisioning server is named as the MAC address of IP phone itself. 102 SERIES IP phones support two different configuration files for auto-provision:
1. Normal Configuration file:
Normal Configuration file is the configuration file of your Alcatel-Lucent IP phone.
You can download it from your phone (You can see the following chapter to see how to download a configuration file from Alcatel-Lucent IP hone) and modify by yourself.
If the IP phone’s MAC address is 00:11:22:33:44:55, the normal configuration file of it should be 001122334455.xml.
2. Broadsoft Configuration files:
Broadsoft Configuration files support the format of Broadsoft IP-PBX. However, you can use them for provisioning. There are two files should be set on your provisioning server, they are also named by the MAC address of your phone
1) 001122334455.cfg: a configuration file for system settings, for example, network, audio and so on.
2) 001122334455.txt: a configuration file for SIP accounts.
Download a configuration file from your phone:
You can download a configuration file from your phone by HTTP as follow:
1. Open the web page of your IP phone, click “Phone Maintenance”>“HTTP
Upgrade”;
2. Then click “Download” of Configuration:
3. If you want to use this file to auto-provision, you just need to modify it by yourself and rename it to the MAC address of your IP Phone with .xml suffix.
www.escene.cn/en
Escene Communication http://ArtTel.ru
54 102 SERIES IPPhone
Extern.xml file on TFTP/HTTP/HTTPS/FTP Server
The Extern.xml includes the settings of programmable buttons on the phone and all
Expansion Modules. All the phones can download the settings from a same file and they will have the same settings (for example, Speed-dial, BLF and so on).
*You can’t rename the file on the provisioning server. The file name is fixed to
Account1_Extern.xml.(Account1 is the first account you register)
Phonebook on TFTP/HTTP/HTTPS/FTP Server
Alcatel-Lucent IP phone supports Enterprise Phonebook and Personal Phonebook.
Enterprise Phonebook:
Enterprise Phonebook is used for all staffs in your office. All phones will download a common phonebook for all staffs. The file’s name must be
Enterprise_Phonebook.xml on your provisioning server and you can not rename it.
Personal Phonebook:
Personal Phonebook is individual for each IP phone. The file on your provisioning server is named by the first account of your IP phone. If the IP phone’s first account is
1287, the Personal Phonebook of this phone is 1287_Phonebook.xml.
Automatic Provisioning using DHCP Option 66
The following steps will descript auto-provision by TFTP. You also can use HTTP and FTP for auto-provision with our phones.
DHCP Server: (Microsoft Windows 2003 server)
1. Start up the “DHCP Management Console”;
2. Expand the DHCP scope which will contain the phones
3. Right-click on the “Scope Options” node
4. Select “Configure Options”
5. In the “General” tab, scroll down the list of options and identify the option labeled “066 Boot Server Host Name”
6. Enable the “066 Boot Server Host Name” and enter the string value according to the examples discussed previously string value:
192.168.0.201(TFTP Server IP Address);
7. Click the “OK” button
IP Phone:
1. Input the IP Phone’s IP Address in browser;
2. Enter user and password with “root” then open the web page;
3. Click “Phone Maintenance” and select “Auto Provision”; www.escene.cn/en
Escene Communication http://ArtTel.ru
55
4. Select like as follows:
102 SERIES IPPhone
5. Click “Submit” to save it.
Auto-Provision via fixable TFTP/HTTP/HTTPS/FTP Server
IP Phone:
1. Input the IP Phone’s IP Address in browser;
2. Enter user and password with “root” then open the web page;
3. Click “Phone Maintenance” and select “Auto Provision”;
4. select like as follows:
Escene Communication http://ArtTel.ru
www.escene.cn/en
56 102 SERIES IPPhone
It supports three protocols in Auto-Provision:TFTP,HTTP and FTP.
The format with provisioning server URL is:
TFTP:
TFTP://192.168.0.201(192.168.0.201 is the default Server IP address)
HTTP:
HTTP://192.168.0.201
HTTPS:
HTTPS://192.168.0.201
FTP:
FTP://192.168.0.201
Username: the user to login FTP/HTTP/HTTPS server
Password: the password of the user using to login FTP/HTTP/HTTPS server
*Username and password are available in FTP/HTTP/HTTPS only (unavailable in
TFTP).
www.escene.cn/en
Escene Communication http://ArtTel.ru
57 102 SERIES IPPhone
Auto Download Software:
Download software from server and upgrade it automatically.
Auto Download Kernel:
Download kernel from server and upgrade it automatically.
Auto Download Config File:
Download configuration file from server and update it automatically.
BroadsoftCompatibility:
If you select this function, you need to put two configuration files (with
Broadsoft format) on the provisioning server. Otherwise, you can download the configuration file from your phone via HTTP (regarding the steps, you can refer to
“Download a configuration file from your phone” in this document.), modify it and upload it to the server for auto-provision.
Auto Download Expansion:
Download configuration file of the Programmable buttons on your phone or
Expansion Modules automatically.
Auto Download Enterprise Phonebook:
Download Enterprise Phonebook from server and update it automatically.
Auto Download Personal Phonebook:
Download Personal Phonebook from server and update it automatically.
Booting Checked:
Check all items you had selected and upgrade/update them when the phone boot
Auto Provision Frequency:
The auto provision Frequency which you want.
Auto Provision Time:
The time you want to execute auto-provision.
Examples of Auto Provision Frequency and Time
1) When you set the Auto Provision Frequency and disableAuto Provision Time
(set to None), the Auto Provision function will work after the AutoProvision
Frequency;
2) When you set both Auto Provision Frequency and Auto Provision Time, for example:
You set the AutoProvision Frequency to 24 hours, and the Auto Provision
Time to 2:00 at 8:00 today (1, Jan), it will pass 24 hours at first and work at the nearest 2:00, it means that the Auto Provision function will work at 2:00 on the day after tomorrow (3, Jan).
Therefore, if you want this function work at 23:00 tonight and it is 8:00 now, you need to set the Auto Provision Frequency to 0 hours and the Auto Provision
Time to 23:00.
AES Encryption:
AES encryption is used for all the setting files of your phone (include configuration file, www.escene.cn/en
Escene Communication http://ArtTel.ru
58 102 SERIES IPPhone
Expansion file, Enterprise/Personal Phonebook etc. You just need to enable the AES Encryption function and input the AES Key matching the one on your server on.
----------------------------------------------------------------------------------------------------------------------
Escene Communication Co.Ltd
Address: Floor 4,Building C,Yuean Industrial Park,Huangcun Road No.51,Tianhe
District,Guangzhou,China.
Postal Code: 510660
Tel: (+86)20-28096798
Fax: (+86)20-28096786 http://www.escene.cn/en/
Technical Support:
E-mail: [email protected]
Escene Communication http://ArtTel.ru
www.escene.cn/en
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 4 GettingStarted
- 4 About
- 4 FeatureHighlights:
- 4 TechnicalFeatures
- 7 ConnectingYourPhone
- 8 Phoneoverview
- 8 UnderstandingButtonsandHardware
- 9 UnderstandingPhoneScreenFeatures
- 11 BasicCallHandling
- 11 PlacingaCall
- 11 AnsweringaCall
- 12 EndingaCall
- 12 UsingHoldandResume(SwitchCallingLine)
- 13 TransferCalls
- 13 DoNotDisturb
- 14 3-wayConference
- 14 Time&Date
- 15 VOIPCallForwarding
- 15 Diagnose
- 17 AdvancedCallHandling
- 17 UsingthePhoneBook
- 19 UsingCallLogs
- 20 KeypadInstruction
- 20 SIPAccountSettings
- 21 NetworkSetting
- 22 Loaddefaultsettings
- 22 Modifypassword
- 22 CustomizingRingsandVolume
- 23 WIFIsetting(onlyWS102Nhasthisitem)
- 24 WebSettings
- 24 ConfigGuide
- 26 WIFISetting(onlyWS102Nhasthisitem)
- 27 WIFIStatus(onlyWS102Nhasthisitem)
- 28 Network
- 29 SIPAccount
- 32 ProgrammableKeys
- 34 Audio
- 35 PhoneBook
- 35 Group
- 36 Contact
- 37 LDAP
- 38 BanList
- 39 EnterprisePhonebook
- 39 Advance
- 39 PhoneSetting
- 43 VLANSetting
- 44 VPNSetting
- 44 DialPlansetting
- 45 IPStrategy
- 46 GlobalSIP
- 46 PhoneMaintenance
- 46 Log
- 47 DefaultSetting
- 48 AutoProvision
- 50 TR069
- 50 FTPUpgrade
- 51 TFTPUpgrade
- 52 HTTPUpgrade
- 53 Reboot
- 54 PhoneStatus
- 55 SystemInfo
- 55 About
- 56 Appendix: