user manual

German Engineered for Excellence

USER MANUAL

HT-MOSEL-165S

PLEASE READ THIS MANUAL CAREFULLY BEFORE USING THE WINE CHILLER

This appliance is intended to be used exclusively for the storage of wine

PRODUCT RANGE : WINE CHILLER

PRODUCT TYPE : FREESTANDING SINGLE ZONE

PRODUCT SERIAL

NUMBER

:

WARRANTY:

 5-year warranty on anti-rust

 5-year warranty on R600A Compressor

 Standard 1-year warranty on manufacturing defects

PRODUCT WARRANTY REGISTRATION:



Log on to www.haustern.com for product warranty registration

FIAMMA TRADING SDN. BHD.

(330476-P)

Wisma Fiamma, No. 20 Jalan 7A/62A, Bandar Manjalara

52200 Kuala Lumpur, Malaysia.

1

Website: www.haustern.com

Office Number: +603-6279 8943


WINE CHILLER SAFETY

IMPORTANT SAFEGUIDES

REFRIGERANT GAS WARNINGS

PARTS BREAKDOWN

IMPORTANT SAFETY INSTRUCTIONS

INSTALLATION INSTRUCTIONS

Before using your wine chiller

Installation of your wine chiller

Free standing cabinet instructions

Electrical connection

Extension cord

Powerbar with surge protector

Installing stainless steel handle

OPERATING YOUR WINE CHILLER

Recommended temperature settings

ON/OFF power

Setting the temperature control

Interior Light

Storage

Door lock

Cleaning your wine chiller

Shelves

Power failure

Moving your wine chiller

Energy saving tips

TROUBLESHOOTING GUIDE

TABLE OF CONTENTS

2


(330476-P)



USER MANUAL



13

14

15-16

12

12

13

10

10

11

11

12

12

12

8

9

8

8

9

9

7

7

7

3

4

5

6


WINE CHILLER SAFETY

USER MANUAL

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the Safety Alert Symbol. This symbol alerts you to potential hazards that can kill or injure you and others. All safety messages will follow the Safety Alert Symbol and either the words

“DANGER”, “WARNING” or “CAUTION”.

Danger means that failure to heed this safety statement may result in severe personal injury or death.

Warning means that failure to heed this safety statement may result in extensive product damage, serious personal injury, or death.

Caution means that failure to heed this safety statement may result in minor or moderate personal injury, or property or equipment damage.

All safety messages will alert you do what the potential hazard is, tell you how to reduce the chance of injury, and let you know what can happen if the instructions are not followed.


(330476-P)



3




USER MANUAL

IMPORTANT SAFEGUIDES

Before the appliance is used, it must be properly positioned and installed as described in this manual, so read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the appliance, follow basic precaution, including the following:

 Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and do not use an extension cord.

 Replace all panels before operating.

 It is recommended that a separate circuit, serving only your appliance be provided. Use receptacles that cannot be turned off by a switch or pull chain.

 Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or explosion.

And do not store or use gasoline or other flammable vapours and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.

 Before proceeding with cleaning and maintenance operations, make sure the power line of the unit is disconnected.

 Do not connect or disconnect the electric plug when your hands are wet.

 Unplug the appliance or disconnect power before cleaning or servicing. Failure to do so can result in electrical shock or death.

 Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in this material. All other servicing should be referred to a qualified technician.

 Use two or more people to move and install appliance. Failure to do so can result in back or other injury.

4


(330476-P)






USER MANUAL

 To ensure proper ventilation for your appliance, the front of the unit must be completely unobstructed.

Choose a well-ventilated area with temperatures above 16°C (60°F) and below 32°C (90°F). This unit must be installed in an area protected from the element, such as wind, rain, water spray or drips.

 The appliance should not be located next to ovens, grills or other sources of high heat.

 The appliance must be installed with all electrical, water and drain connections in accordance with state and local codes. A standard electrical supply (220V/50Hz), properly grounded in accordance with the

National Electrical Code and local codes and ordinances is required.

 Do not kink or pinch the power supply cord of appliance.

 The fuse (or circuit breaker) size should be 13 amperes.

 It is important for the appliance to be levelled in order to work properly. You may need to make several adjustments to level it.

 Never allow children to operate, play with or crawl inside the appliance.

 Do not use solvent-based cleaning agents of abrasives on the interior. These cleaners may damage or discolour the interior.

 Do not use this apparatus for other than its intended purpose.

FLAMMABLE REFRIGERANT GAS

DANGER - Risk of fire or explosion. Flammable refrigerant used.

DO NOT use mechanical devices to defrost refrigerator. DO NOT puncture refrigerant tubing.

DANGER - Risk of fire or explosion. Flammable refrigerant used. To be repaired only by trained service personnel. DO NOT puncture refrigerant tubing.

CAUTION - Risk of fire or explosion. Flammable refrigerant used. Consult repair manual / owner’s guide before attempting to service this product. All safety precautions must be followed.

CAUTION - Risk of fire or explosion. Dispose of property in accordance with federal or local regulations. Flammable refrigerant used.

CAUTION - Risk of fire or explosion due to puncture of refrigerant tubing. Follow handling instructions carefully. Flammable refrigerant used.

CAUTION - To prevent a child from being entrapped, keep out of reach of children and not in the vicinity of the cooler.


(330476-P)



5




PARTS BREAKDOWN

USER MANUAL

1 Control Panel

Wooden Shelves and

2

Telescopic Runner

3 Kick plate

4 Leveling Legs

5

6

7

Top Hinge

Stainless Steel Door with Handle

Safety Child Lock

IMPORTANT SAFETY INSTRUCTIONS

6


(330476-P)








WARNING



USER MANUAL

To reduce the risk of fire, electrical shock, or injury when using your appliance, follow these basic precautions:

 Read all instructions before using the wine chiller.

 DANGER or WARNING: Risk of child entrapment.

Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still dangerous.

 Before you throw away your old wine chiller, take off the door but leave the shelves in place so that children may not easily climb inside.

 Never allow children to operate, play with, or crawl inside the appliance.

 Never clean appliance parts with flammable fluids. The fumes can create a fire hazard or explosion.

 Do not store or use gasoline or any other flammable vapours and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.

-Save these instructions-

Before using your wine chiller

INSTALLATION INSTRUCTIONS

 Remove the exterior and interior packing.

 Check to be sure you have all of the following parts: o

5 shelves o

2 Keys o

Stainless Steel Handle o

Instruction Manual

 Before connecting the Wine Chiller to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.

 Clean the interior surface with lukewarm water using a soft cloth.

 Install the handle on the left side of the door.

Installation of your wine chiller

7


(330476-P)






 This appliance is designed to be for free standing installation or flush-in.

USER MANUAL

 Place your wine chiller on a floor that is strong enough to support it when it is fully loaded. To level your wine chiller, adjust the front levelling legs at the bottom of the wine chiller.

 Locate the wine chiller away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient temperatures may also cause the unit not to perform properly.

 Avoid locating the unit in moist areas.

 Plug the Wine Chiller into an exclusive, properly installed-grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized Products service center.

Flush-in cabinet instructions

This unit is designed for either flush-in or free standing installation. If you plan to use this unit in a flush-in application please follow the requirements shown to the right.

Cabinet Opening Dimensions

Width

Depth

Height

Inches

16

26

35

Centimeters

41

66

89

Electrical connection



Warning: Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, have it replaced by an authorized service center.

This appliance should be properly grounded for your safety. The power cord of this appliance is equipped with a three-prong plug which mates with standard three prong wall outlets to minimize the possibility of electrical shock.

Do not under any circumstances cut or remove the third ground prong from the power cord supplied. For personal safety, this appliance must be properly grounded.

This appliance requires a standard 220V/50Hz electrical ground outlet with three-prong. Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded. When a standard 2-prong wall outlet is encountered, it is your responsibility and obligation to have it replaced with a properly grounded

3-prong wall outlet. The cord should be secured behind the appliance and not left exposed or dangling to prevent accidental injury.

8


(330476-P)






USER MANUAL

The appliance should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating label on the appliance. This provides the best performance and also prevent overloading house wiring circuits that could cause a fire hazard from overheated. Never unplug the appliance by pulling the power cord. Always grip the plug firmly and pull straight out from the receptacle. Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end. When moving the appliance, be careful not to damage the power cord.

Extension cord

Because of potential safety hazards under certain conditions, it is strongly recommended that you do not use an extension cord with this appliance. However, if you must use an extension cord it is absolutely necessary that it be a 3-wire grounding type appliance extension cord having a grounding type plug and outlet and that the electrical rating of the cord be 220 volts and at least 13 amperes.

Power bar with surge protection

Most electrical appliances use a series of electric control boards to operate. These boards are very susceptible to power surges and could be damaged or destroyed.

If the appliance is going to be used in an area or if your city / country is prone to power surges / outages; it is suggested that you use a power surge protector for all electrical devices / appliances you use. The surge protector that you select must have a surge block high enough to protect the appliance it is connected to. If you have any questions regarding the type and size of surge protector needed contact a licensed electrician in your area.

Damages due to power surges are not considered a manufacturer covered defect and will void your product warranty.

Installing the stainless steel handle

This wine chiller includes a stainless steel handle. To install the handle please follow the below instructions:

1. Pull away the door gasket in the area where the handle is to be installed on the left side as shown below in

Illustration # 1. The gasket is easily displaced by hand, no tools are necessary.


(330476-P)



9




USER MANUAL

2. Align the handle with the screws installed. Tighten the screws using a Phillips head screwdriver until the handle sets both flush and secured tightly against the door frame. (DO NOT over tighten as this will cause damage to the handle assembly).

3. Replace the door gasket to its original position.

4.

If you choose not to use the handle supplied, simply follow step 1 to access the installation screws and remove them and then place the two decorative plugs into the two holes separately. Continue on to step 3 to replace the door gasket to its original position.

Illustration # 1 Illustration # 2

1. Gasket

2. Phillips Head Screw

3. Phillips Head Screw Driver

4. Handle

OPERATING YOUR WINE CHILLER

It is recommended you install the wine chiller in a place where the ambient temperature is between 19ºC-24ºC

(66ºF-75ºF), and humidity is under 60%. If the ambient temperature is above or below recommended temperatures, the performance of the unit may be affected. For example, placing your unit in extreme cold or hot conditions may cause interior temperatures to fluctuate. The range of 5ºC-18ºC (40ºF-65ºF) may not be reached.

10


(330476-P)






Recommended temperature settings

Wine conservation: 12°C-14ºC (53°F-57ºF)

Rose and sparkling wines: 5°C-8ºC (41°F-46ºF)

Dry/white wines: 9°C-12ºC (48°F-53ºF)

Red wines: 14°C-18ºC (59°F-65ºF)

USER MANUAL

ON/OFF Power

To turn OFF the appliance, press the button and hold 2 seconds.

Setting the temperature control

You can select temperature display setting from Fahrenheit to Celsius degree by touching the button.

Fahrenheit or Celsius degrees indicator will appear in blue color in the temperature display window.

If you desire to change the temperature, set the temperature as you desire by touching the or button.

First press the button. The numbers in the display window will flash. The temperature that you desire to set will increase 1ºF or 1ºC if you touch the button once; on the contrary the temperature will decrease 1ºF or

1ºC if you touch the button once.

When you store mostly red wines, the temperature which you control by touching the above two buttons need to be set at 15ºC-18ºC (59ºC-65ºF). When you store mostly white wines, the temperature needs to be set at

9ºC-14ºC (48ºF-57ºF) When you store mostly sparkling wines, the temperature needs to be set at 5ºC-8ºC

(40ºF-47ºF)

The temperature inside the unit will be appeared in blue color in the display window.


(330476-P)



11




USER MANUAL

NOTE: If the unit is unplugged, if the power is lost, or turned off, you must wait 3 to 5 minutes before restarting the unit. If you attempt to restart before this time delay, the wine chiller will not start.

When you use the wine chiller for the first time or restart the wine chiller after having been shut off for a long time, there could be a few degrees variance between the temperature you select and the one indicated on the LED readout. This is normal and it is due to the length of the activation time. Once the wine chiller is running for a few hours everything will be back to normal.

Interior light

To turn the interior light ON or OFF, press the button. The light will be turned off automatically if it remains

ON for 10 minutes. To turn it on again, press the button again and the light will turn back on.

Storage

Many bottles may differ in size and dimensions. As such the actual number of bottles you may be able to store may vary. You can place 30 standard bottles in this wine chiller.

Door Lock

Your unit is provided with a lock and key. The keys are located inside the plastic bag that contains the Instruction

Manual. Insert the key into the lock and turn it counter clockwise to unlock the door. To lock the door do the reverse operation making sure metal pin is engaged completely. Remove the key and place it in a secure place for safekeeping.

Cleaning your wine chiller

Turn off the power, unplug the appliance, and remove all items including shelves. Wash the inside surfaces with a warm water and baking soda solution. The solution should be about 2 tablespoons of baking soda to 1 cup of water.

Wash the shelves with a mild detergent solution. Wring excess water out of the sponge or cloth when cleaning area of the controls, or any electrical parts.

Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with a clean soft


(330476-P)



12




USER MANUAL

cloth. Do not use steel wool or steel brush on the stainless steel. These will contaminate the stainless steel with steel particles and rusting may occur.

Shelves

This appliance is equipped with a telescopic runner assembly (except for the bottom shelf) and you can move the wooden shelves out and in smoothly.

To prevent damaging the door gasket, make sure to have the door all the way opened when pulling shelves out of the rail compartment. For easy access to the bottles, you must pull the shelves approximately 1/3 out of the rail compartment.

To remove the shelves out of the rail pull each shelf approximately 1/3 out. Use a long flat screwdriver to press down the right plastic notch as shown in Figure A and at the same time lift the left plastic notch as shown in Figure

B. Then proceed to pull out the shelf slowly.

Figure A Figure B

Power failure

Most power failures are corrected within a few hours and should not affect the temperature of your appliance if you minimize the number of times the door is opened. If the power is going to be off for a longer period of time, you need to take the proper steps to protect your contents.

Moving your wine chiller

 Remove all items (bottles)

 Tape down securely all loose items (shelves) inside your appliance.

 Turn the adjustable leg up to the base to avoid damage.


(330476-P)



13




 Tape the door shut.

USER MANUAL

 Be sure the appliance stays secure in the upright position during transportation. If you absolutely need to transport the chiller horizontally, transport the chiller on its back (door on top). Also protect outside of appliance with a blanket, or similar item.

Energy saving tips

The wine chiller should be located in the coolest area of the room, away from heat producing appliances, and out of the direct sunlight.


(330476-P)



14




TROUBLESHOOTING GUIDE

USER MANUAL

You can solve many common wine chiller problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling the servicer.

PROBLEM

chiller does not operate. chiller is not cold enough.

The compressor turns on and off frequently.

The fans turn on and off frequently.

The light does not work.

POSSIBLE CAUSE SOLUTION

Not plugged in.

The appliance is turned off.

The circuit breaker tripped or a blown fuse.

External environment may require a higher setting.

The door is opened too often.

The door is not closed completely.

The door gasket does not seal properly.

Plug the unit.

Press to turn on the unit.

Check the breaker and/or fuses.

Check the temperature control setting.

Close the door properly.

Check the door gasket.

The room temperature is hotter than normal.

A large amount of contents has been added to the chiller.

The door is opened too often.

The door is not closed completely.

The temperature control is not set correctly.


Check the door gasket.

The door gasket does not seal properly.

In order to circulate the air and maintain the set temperature inside the cabinet the fans must cycle on and off even when the compressor is off. The fans will cycle ON and OFF while the compressor is off approximately every 10 seconds, this is called

“Semi-speed status”. This cycle is normal and meant both to circulate the air as well as ensure the continued operational status of the fans. If the fan stops completely and does not complete this cycle the fan is non-operational.

Not plugged in.

The circuit breaker tripped or a blown fuse.

The light button is “OFF”.

Plug the unit.

Check the breaker and/or fuses.


(330476-P)



15




Vibrations.

The chiller seems to make too much noise.

The door will not close properly.

USER MANUAL

The chiller is not levelled

The bottles are vibrating.

There is an object under the chiller.

The chiller is not level.

Check to assure that the chiller is level.

Make sure the bottles don’t touch each others.

Remove the object.

Level the chiller.

The rattling noise may come from the flow of the refrigerant, which is normal.

As each cycle ends, you may hear gurgling sounds caused by the flow of refrigerant in your chiller. Contraction and expansion of the inside walls may cause popping and crackling noises.

The chiller is not level.

The door was reversed and not properly installed.

The gasket is dirty.

The shelves are out of position.

Level the chiller.


Clean the door gasket.

Place the shelves properly.

Error Code:

E1-E2-E3-

E4-E7-E8

A sensor has failed. Contact us for a service call.


(330476-P)



16



user manual

HT-MOSEL-165S

PLEASE READ THIS MANUAL CAREFULLY BEFORE USING THE WINE CHILLER

PRODUCT RANGE : WINE CHILLER

PRODUCT TYPE : FREESTANDING SINGLE ZONE

PRODUCT SERIAL

NUMBER

:

WARRANTY:

PRODUCT WARRANTY REGISTRATION:

1

TABLE OF CONTENTS

2

WINE CHILLER SAFETY

3

IMPORTANT SAFEGUIDES

4

FLAMMABLE REFRIGERANT GAS

5

PARTS BREAKDOWN

IMPORTANT SAFETY INSTRUCTIONS

6

WARNING

To reduce the risk of fire, electrical shock, or injury when using your appliance, follow these basic precautions:

Before using your wine chiller

INSTALLATION INSTRUCTIONS

Installation of your wine chiller

7

Flush-in cabinet instructions

Electrical connection

8

Extension cord

Power bar with surge protection

Installing the stainless steel handle

9

4.

Illustration # 1 Illustration # 2

OPERATING YOUR WINE CHILLER

10

Recommended temperature settings

ON/OFF Power

Setting the temperature control

11

Interior light

Storage

Door Lock

Cleaning your wine chiller

12

Shelves

Power failure

Moving your wine chiller

13

Energy saving tips

14

TROUBLESHOOTING GUIDE

15

16

Related manuals

Hauster

HT-MOSEL-51D

Hauster

HT-MOSEL-51D

VALERA

WSU1375

Kadeka

KA24WR

Stirling

JC-135EB

Honeywell

PERFECT CHILL 88013

Samsung

RW52DASS

Rubine

RGH-FIGATA2B-BL

Rubine

RCH-ONYX-90BL

Tylza

TYBC120-TYBC120

Rubine

RUF-9207H-ABS