Samsung DVD-TR520 Instruction manual

00627D-DVD-TR520_XAA_1-16
2005.7.26
9:54 AM
Page 1
Instruction Manual
DVD-TR520
www.samsung.com
AK68-00627D-01
00627D-DVD-TR520_XAA_1-16
2005.7.26
7:20 AM
Page 2
Getting Started
Warning
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE THE COVER(OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates “dangerous voltage” inside
the product that presents a risk of electric shock or
personal injury.
This symbol indicates important instructions
accompanying the product.
Do not install this equipment in a confined space such as a
bookcase or similar unit.
FCC NOTE (for U.S.A):
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures :
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
■
NOTE
■
WARNING : To prevent damage which may result in fire or
electric shock hazard, do not expose this appliance to rain or
moisture.
CAUTION : TWIN TRAY DVD RECORDERS USE AN
INVISIBLE LASER BEAM WHICH CAN CAUSE
HAZARDOUS RADIATION EXPOSURE IF DIRECTED.
BE SURE TO OPERATE RECORDER CORRECTLY AS
INSTRUCTED.
CAUTION
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.
CAUTIONS
Caution: To prevent electric shock, match wide blade of plug to
wide slot, fully insert.
Attention: Pour éviter les chocs électriques, introduíre la lame
la plus large de la fiche dans la borne
correspondante de la prise et pousser jusqu au fond.
This product satisfies FCC regulations when
shielded cables and connectors are used to connect
the unit to other equipment. To prevent
electromagnetic interference with electric appliances,
such as radios and televisions, use shielded cables
and connectors for connections.
2 - English
■
This unit can be used only where the
power supply is AC 120V, 60Hz. It cannot
be used elsewhere.
This TWIN TRAY DVD RECORDER is
designed and manufactured to respond
to the Region Management Information. If
the Region number of a TWIN TRAY
DVD disc does not correspond to the
Region number of this TWIN TRAY DVD
RECORDER, the TWIN TRAY DVD
RECORDER cannot play the disc.
This device is protected by U.S. Patent
Nos.4,631,603;4,577,216;4,819,098;4,90
7,093; and 6,516,132.This product
incorporates copyright protection
technology that is protected by U.S.
patents and other intellectual property
rights.Use of this copyright protection
technology must be authorized by
Macrovision,and is intended for home
and other limited viewing uses only
unless otherwise authorized by
Macrovision.Reverse engineering or
disassembly is prohibited.
00627D-DVD-TR520_XAA_1-16
2005.7.26
7:20 AM
Page 3
Precaution
Read these operating instructions carefully before using
the unit. Follow all the safety instructions listed below.
Keep these operating instructions handy for future
reference.
1)
2)
3)
4)
5)
6)
7)
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings, Install in
accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding- type plug. A polarized plug has two
blades with one wider than the other. A groundingtype plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. if the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, the point where they exit from the
apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.
13) Unplug this apparatus during lightning storms or
when unused for long periods of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
• Before connecting other components to this TWIN
TRAY DVD RECORDER, be sure to turn them all
off.
• Do not move the TWIN TRAY DVD RECORDER
while a disc is being played, or the disc may be
scratched or broken, the twin tray TWIN TRAY DVD
RECORDER’s internal parts may be damaged.
• Do not put a flower vase filled with water or any
small metal objects on the TWIN TRAY DVD
RECORDER.
• Be careful not to put your hand into the disc tray.
• Do not place anything other than the disc in the
disc tray.
• Exterior interference such as lightning and static
electricity can affect normal operation of this TWIN
TRAY DVD RECORDER. If this occurs, turn the
TWIN TRAY DVD RECORDER off and on again
with the DVD POWER button, or disconnect and
then reconnect the AC power cord to the AC power
outlet. The TWIN TRAY DVD RECORDER will
operate normally.
• Be sure to remove the disc and turn off the TWIN
TRAY DVD RECORDER after use.
• Disconnect the AC power cord from the AC outlet
when you don’t intend to use the TWIN TRAY DVD
RECORDER for long periods of time.
• Clean the disc by wiping in a straight line from the
inside to the outside of the disc.
Maintenance of Cabinet
For safety reasons, be sure to disconnect the AC
power cord from the AC outlet.
• Do not use benzene, thinner, or other solvents
for cleaning.
• Wipe the cabinet with a soft cloth.
Disc Handling
• Use discs with regular
shapes. If an irregular disc
(a disc with a special
shape) is used, this TWIN
TRAY DVD RECORDER
may be damaged.
English - 3
Getting Started
Important Safety Instructions
Handling Cautions
00627D-DVD-TR520_XAA_1-16
2005.7.26
7:20 AM
Page 4
Getting Started
Holding discs
• Avoid touching the surface of a
disc where recording is
performed.
condensation may generate on the operating parts
and lens and cause abnormal disc playback. If this
occurs, do not connect the plug to the power outlet
and wait for two hours. Then insert the disc and try to
playback again.
• Be careful not to harm the disc because the data on
these discs is highly vulnerable to the environment.
Cartridge
Disc Specifications
• This is used to prevent damage by
dirt, scratches, etc. when using a
DVD-RAM disc in the R tray.
DVD-RAM, DVD-RW and DVD-R
• Clean with an optional DVD-RAM/PD disc
cleaner. Do not use cleaners or cloths for CDs to
clean DVD-RAM/-RW/-R discs.
DVD-Video, Audio-CD
• Wipe off dirt or contamination on the disc with a
soft cloth.
Cautions on handling discs
• Do not write on the printed side with a ball-point
pen or pencil.
• Do not use record cleaning sprays or antistatic.
Also, do not use volatile chemicals, such as
benzene or thinner.
• Do not apply labels or stickers to discs. (Do not
use discs fixed with exposed tape adhesive or
leftover peeled-off stickers.)
• Do not use scratch-proof protectors or covers.
• Do not use discs printed with label printers
available on the market.
• Do not load warped or cracked discs.
Disc Type
DVD-Video
• A digital versatile disc (DVD) can contain up to 135minutes of video, 8 audio languages and 32 subtitle
languages. It is equipped with MPEG-2 picture
compression and Dolby digital surround, allowing you
to enjoy vivid and clear theater quality video in the
comfort of your own home.
• When switching from the first layer to the second layer
of a dual-layered DVD Video disc, there may be
momentary distortion in the video and sound. This is
not a malfunction of the unit.
• Once a DVD-RW/-R recorded in Video Mode is
finalized, it becomes a DVD-Video disc.
Audio CD
• An audio disc on which 44.1kHz PCM Audio is
recorded.
• Plays CD-DA format audio CD-R and CD-RW discs.
• The unit may not be able to play some CD-R or CDRW discs due to the condition of the recording.
CD-RW/-R
Disc Storage
Be careful not to harm the disc because the data on
these discs is highly vulnerable to the environment.
• Do not keep under direct sunlight.
• Keep in a cool ventilated area.
• Store vertically.
• Keep in a clean protection jacket.
• If you move your TWIN TRAY DVD RECORDER
suddenly from a cold place to a warm place,
4 - English
• Use a 700MB(80 minutes) CD-R/RW disc. If possible,
do not use a 800MB(90 minutes) or above disc, as the
disc may not play back.
• If the CD-R/RW disc was not recorded as a closed
session, you may experience a delay in the early
playback time, all recorded files may not play.
• Some CD-R/RW discs may not be playable with this
unit, depending on the device which was used to burn
them. For contents recorded on CD-R/RW media from
CDs for your personal use, playability may vary
depending on contents and discs.
00627D-DVD-TR520_XAA_1-16
2005.7.26
7:20 AM
Page 5
DVD-R Disc Playback and Recording
DVD-RW Disc Playback and Recording
• Recording and playback can be performed on DVDRW discs in both the Video and VR Modes.
• Once a DVD-RW recorded in both the Video and VR
Modes is finalized, you cannot perform additional
recording.(See pages 106~107)
• Once a DVD-RW recorded in Video Mode is finalized,
it becomes a DVD-Video disc.
• In both modes, playback can be performed before and
after finalization, but additional recording, deleting and
editing can not be performed after finalization.
• If you want to record the disc in VR Mode and then
record in V Mode, be sure to execute Format.
Be careful when execute Format because all the
recorded data may be lost.
• A DVD-RW blank disc is initialized to VR Mode when
first initialized.
• The unfinalized DVD-RW(Video mode)discs can not
play back in the P Tray.
DVD-RAM Disc Playback and Recording
• DVD-RAM discs come with or without a cartridge. For
this product, we recommend DVD-RAM discs that
come with cartridges.
•
•
•
•
•
•
Disc
DVD-RAM
DVD-RW
DVD-R
Maximum no. of recordings by disc type
100,000
1,000
1
Disc Copy
Disc Copy Specifications
Recorder tray
Player tray
DVD-Dual Layer
Disc
DVD-Single
Layer, DVDVideo, without
Copy Protection
Copy Protected
Disc
Recorded Video
Disc- DVD-RAM
Recorded Video
Disc- DVD-RW
(V Mode)
Recorded Video
Disc- DVD-RW
(VR Mode)
Recorded Video
Disc- DVD-R
DVD-R
DVD-RW
(VR mode)
DVD-RW
(V mode)
DVD-RAM
No
No
No
No
Yes
No
Yes
No
No
No
No
No
No
No
No
Yes
Yes
No
Yes
No
No
Yes
No
No
Yes
No
Yes
No
Yes = Disc copying is possible.
No = Disc copying is not possible.
English - 5
Getting Started
• Once a DVD-R recorded in Video Mode is finalized, it
becomes a DVD-Video disc.
• You can record onto the available space on the disc
and perform editing functions such as giving titles to
discs and programs and erasing programs before
finalizing.
• When programming is erased from a DVD-R, that
space does not become available. Once an area on a
DVD-R is recorded on, that area is no longer available
for recording, whether the recording is erased or not.
• It takes about 30 seconds for the unit to complete
recording management information after recording
finishes.
• Playback may be impossible in some cases due to the
condition of recording.
• This unit can play back DVD-R discs recorded and
finalized with a Samsung DVD video recorder. It may
not be able to play some DVD-R discs depending on
the disc and the condition of the recording.
• The unfinalized DVD-R discs can not play back in the
P Tray.
Cartridges can only be used in the R tray of this
product.
Some cartridges are able to eject the disc inside.
Even if you are able to eject the disc, always use the
disc with the cartridge to ensure correct operation.
DVD-RAM discs have a Write Protect tab in order to
avoid accidental erasure of recorded data. With the
Write Protect tab set to PROTECT, you can play the
disc, but recording or erasing will not work. Set the
Write Protect tab to UNPROTECT to format the disc
or erase data.
This unit is compatible with both non-cartridge and
cartridge DVD-RAM, but the write-protect tabs on
cartridge-type discs give better protection to your
recordings.
You cannot play a DVD-RAM in most DVD components
due to compatibility issues.
Only DVD-RAM standard Version 2.0. discs can be
played in this unit.
DVD-RAM recorded on this unit may not work with
other DVD components. To determine compatibility
with these DVD-RAM discs, refer to the user’s manual
for the player.
00627D-DVD-TR520_XAA_1-16
2005.8.5
3:40 AM
Page 6
Getting Started
COPY PROTECTION
• Many DVD discs are encoded with copy
protection. Because of this, you should only
connect your TWIN TRAY DVD RECORDER
directly to your TV, not to a VCR. Connecting to a
VCR results in a distorted picture from copyprotected DVD discs.
• This product incorporates copyright protection
technology that is protected by methods claims of
certain U.S. patents and other intellectual
property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright
protection technology must be authorized by
Macrovision Corporation, is intended for home
and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
Protection
This TWIN TRAY DVD
RECORDER allows you to
protect the contents of your
discs, as described below.
• Cartridge Protection allows you to protect discs from
disc formatting and program deletion due to
unintended operations. The cartridge write protect tab
should be set to the unprotect position to be able to
record, copy, edit or erase a DVD-RAM disc.
Using JPEG disc
• CD-R, DVD-R/RW/RAM, with JPEG files recorded
with UDF, ISO9660 or JOLIET format can be
playbacked.
• Only JPEG files with the “.jpg” or “.JPG” extension
can be displayed.
• The unit can handle a maximum of 4,500 files and
1,000 sub folders under a folder.
• MOTION JPEG and progressive JPEG are not
supported.
DVD-RW (VR mode)
• This is a format that is used for recording data on a
DVD-RAM or DVD-RW disc. You can record multiple
titles, edit, delete, partial delete, create a playlist, etc.
• A disc that is recorded in this mode may not be
playable on another manufacturer's DVD recorder or
player.
DVD-RW (V mode)
• Disc Protection : See page 104 “Disc Protection”
• This is a format that is used for recording data on a
DVD-RW or DVD-R disc. The disc can be played by
existing DVD RECORDER once it has been finalized.
• If a disc that has been recorded in Video Mode by
another manufacturer's recorder, but has not been
finalized, it may be played or additionally be recorded
by this TWIN TRAY DVD RECORDER.
❋ DVD-RAM/-RW/-R discs that are incompatible with the
DVD-VIDEO format cannot be played in this product.
Do not use the following discs!
• Program Protection: See page 83 “Locking(Protecting)
a Title”
❋ For more information on DVD recording compatibility,
consult your DVD-RAM/-RW/-R manufacturer.
❋ Use of poor quality DVD-RAM/-RW/-R discs may
cause following unexpected problems including,
without limitation, recording failure, loss of recorded
or edited materials or damage to the TWIN TRAY
DVD RECORDER.
Disc Format
Using MP3 disc
• CD-R, DVD-R/RW/RAM, with MP3 files recorded with
UDF, ISO9660 or JOLIET format can be playbacked.
• Only MP3 files with the “.mp3” or “.MP3” extension
can be played.
• For MP3 files recorded with a VBR(Variable Bit Rates),
from 32 Kbps to 320 Kbps, the sound may cut in and out.
• Playable bit-rate range is from 56 Kbps to 320 Kbps.
• The unit can handle a maximum of 1,500 files and
1,000 sub folders under a folder.
6 - English
• LD, CD-G, CD-I, CD-ROM, SACD CD Layer,
DVD-ROM, DVD+R and DVD+RW discs should not
be used in this product.
[Note]
Disc types that can be played : CD/CD-R/CD-RW/
MP3/JPEG/DVD-Video/DVD-RAM/-RW/-R.
DVD-RW/-R discs which have been recorded in Video
Mode on another manufacturer's recorder, can play
only when finalized.
• Some commercial discs and DVD discs purchased
outside your region may not be playable with this
product. When these discs are played, either “No
disc.” or “Please check the regional code.” will be
displayed.
• If a disc has been recorded in Video Mode by another
manufacturer's recorder, but has not been finalized, it
may not be played or additionally be recorded by this
TWIN TRAY DVD RECORDER.
00627D-DVD-TR520_XAA_1-16
2005.7.26
7:20 AM
Page 7
Contents
Step 4 : Connecting External devices . . . . . . . . . . .23
Getting Started
Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Precaution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . .3
Handling Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Maintenance of Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . .3
Disc Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Disc Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Disc Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Disc Copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
General Features . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Before Reading the User’s Manual . . . . . . . . . . . . .10
How to use the TWIN TRAY DVD RECORDER . . .10
Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Front Panel Display . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Tour of the Remote Control . . . . . . . . . . . . . . . . . . . . . . .16
Connecting & Setting up
Quick Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Step 1: Connecting the Antenna Cable . . . . . . . . . .18
Method 1 : Antenna + TWIN TRAY DVD RECORDER +
TV : No Cable box . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Method 2 : Antenna + Cable box + TWIN TRAY DVD
RECORDER + TV : Cable box with many scrambled
channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Method 3 : Antenna + TWIN TRAY DVD RECORDER +
Cable box + TV : Cable box with a few scrambled
channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Method 1 : Connecting a VCR, Set-Top Box(STB) or
TWIN TRAY DVD player to the AV 1 IN jacks . . . . . . . .23
Method 2 : Connecting a Camcorder to
the AV 2 IN jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Method 3 : Connecting a Camcorder to
the DV IN jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Step 5 : Connecting the Power Cord . . . . . . . . . . . .24
System Setup
On-Screen Menu Navigation.....................................25
OSD Language Setup ...............................................26
Auto Clock Set ...........................................................26
Manual Clock Set.......................................................28
Auto Channel Memory...............................................29
Manual Channel Set ..................................................30
Auto Power Off Setting..............................................31
CM Skip Time Setting................................................31
EP Mode Time Setting...............................................32
Setting up the Front Display Options........................33
Automatic Chapter Creator........................................34
Setting up the Language Options .............................35
Setting up the Audio Options.....................................36
Setting up the Video display Options........................37
Setting up the Progressive scan ...............................38
Canceling the Progressive scan ...............................39
Setting up the Parental Control.................................40
If you forgot your password ............................................40
About the Rating Level ...................................................41
About the Change Password .........................................41
Playback
Step 2 : Connecting the Video cable . . . . . . . . . . . .20
Method 1 : Connecting to a Video input jack . . . . . . . . .20
Method 2 : Connecting to an S-Video input jack . . . . .21
Method 3 : Connecting to Component video input
jacks(Y,PB,PR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Before Playing..............................................................42
Playing a Disc ..............................................................43
Using the Disc Menu & Title Menu .............................44
Using the Search & Skip Functions............................45
Step 3 : Connecting the Audio cable . . . . . . . . . . . .22
English - 7
Getting Started
Method 1 : Connecting to your TV . . . . . . . . . . . . . . . . .22
Method 2 : Connecting to a stereo amplifier
with analog input jacks . . . . . . . . . . . . . . . . . . . . . . . . .22
Method 3: Connecting to an AV amplifier
with a digital input jack . . . . . . . . . . . . . . . . . . . . . . . . .23
Getting Started
00627D-DVD-TR520_XAA_1-16
2005.7.26
12:50 PM
Page 8
Slow Motion Play/Step Motion Play............................46
About ANYKEY ............................................................46
Playing the Title List.....................................................48
Navigation Menu..........................................................49
Using the Markers........................................................52
Using the Bookmarks ..................................................54
Selecting the Subtitle Language .................................56
Selecting the Soundtracks & Audio Channels ...........57
Changing the Camera Angle.......................................58
Repeat Play..................................................................58
Zooming-In ...................................................................60
Select Tray....................................................................61
Playing an Audio CD/MP3...........................................61
Playing a Picture ..........................................................68
Recording
Before Recording.........................................................71
Recording the current TV
program you are watching...........................................73
Recording from external equipment
you are watching..........................................................74
Copying from a Camcorder.........................................75
Making a One Touch Recording (OTR)......................76
Making a Timer Recording ..........................................77
Flexible Recording (for Timer Recording only)...........79
Editing the Timer Record List......................................79
Deleting a Timer Record List.......................................80
Editing
Basic Editing (Title List) .............................................82
Renaming(Labeling) a Title.............................................82
Locking (Protecting) a Title .............................................83
Deleting a Title.................................................................83
Deleting a Section of a Title (Partial Delete)..................85
Advanced Editing (Playlist) .......................................87
Creating a Playlist............................................................87
Playing Entries in the Playlist..........................................88
Renaming a Playlist Entry...............................................89
Editing a Scene for the Playlist.......................................90
Deleting a Playlist Entry from the Playlist ......................94
8 - English
Title Copy ...................................................................95
About the Copy Screen...................................................95
Contents(Title) Copy Specifications. ..............................95
Copying a Title that has been edited once before ........97
Changing the Record Mode ...........................................98
Copying Multiple Titles at One Time .......................99
Deleting an Undesired Title from the Copy List...........100
Previewing a Selected Title from the Copy List...........101
Selecting Record Mode of Each Title from the
Copy List........................................................................101
Changing Record Mode of All Titles from the
Copy List .......................................................................102
Disc Copy.................................................................102
Disc Copy Specifications..........................................102
Disc Manager ......................................................... 103
Editing the Disc Name ..................................................103
Disc Protection ............................................................. 104
Formatting a Disc ..........................................................105
Delete All Title Lists .......................................................105
Finalizing a Disc ............................................................106
Unfinalizing a Disc (V/VR mode)..................................107
Reference
Troubleshooting ........................................................109
Specifications ...........................................................113
Warranty....................................................................114
00627D-DVD-TR520_XAA_1-16
2005.7.27
5:16 AM
Page 9
Automated Quality Adjustment for Timer Recording
General Features
If FR mode is selected, the video quality is adjusted
automatically so that all video for the scheduled time can
be recorded onto the free disc space.
(See page 79)
Copy from P Tray to R Tray
You can copy non-copy protected recordings from the disc
in P Tray to recordable disc in the R Tray. Usually you can
use the high speed copy feature.
You can also choose to copy material at a different
recording quality from the original. For example, you might
want to copy a XP mode recording on the P Tray to
SP(Standard play)quality on the R Tray so that you can fit
other recordings on the same disc.
High quality digital audio and video recording and
playback
Record up to 16-hours of video with a double sided 9.4
GB DVD-RAM disc, up to 8-hours of images with a 4.7
GB DVD-RAM/-RW/-R disc, depending on the recording
mode.
Selectable Recording Mode
With the TWIN TRAY DVD RECORDER, you can create
your own DVD Video titles on 4.7 GB DVD-RW/-R discs.
Copying data from a digital camcorder using a DV
input jack
Record DV Device video onto, DVD-RAM, DVD-RW or
DVD-R discs using the DV input jack (IEEE 13944pin/4pin) in the R Tray. (See pages 75~76)
High quality Progressive Scan
Progressive scanning provides high resolution and flicker
free video. The 10-bit 54-MHz DAC and 2D Y/C
Separating Circuitry provides the highest image playback
and recording quality. (See pages 38~40)
A variety of functions with an easy-to-use
user interface
The integrated menu system and the messaging
function allow you to perform desired operations both
easily and conveniently. With a DVD-RAM or DVD-RW
disc, you can edit recorded video, create a playlist, edit
video in a specific sequence according to your
requirements in the R Tray.
You can set your TWIN TRAY DVD RECORDER to one
of four different recording speeds, each varying in
recording quality and length. EP (6Hr or 8Hr) mode yields
the most recording time, LP & SP modes provide less
recording time with higher quality recording, XP mode
gives you the highest quality recording.
English - 9
Getting Started
Creating a DVD video title using DVD-RW/-R disc
The TWIN TRAY DVD RECORDER allows you to play
high quality digital video on DVD-RAM/-RW/-R discs. You
can also record and edit digital images on DVD-RAM/RW/-R discs in the R Tray.
This unit can not open the P tray and the R tray
simultaneously.
Getting Started
00627D-DVD-TR520_XAA_1-16
2005.7.26
7:20 AM
Page 10
Before Reading the
User’s Manual
Copyright
©2005 Samsung Electronics Co.
All rights reserved; No part or whole of this user’s
manual may be reproduced or copied without the prior
written permission of Samsung Electronics Co.
Make sure to check the following terms before reading
the user manual.
Icons that will be used in manual
Icon
Term
Definition
DVD
This involves a function available
in DVD or DVD-R/DVD-RW
discs that have been recorded
and finalized in Video Mode.
RAM
This involves a function available
in DVD-RAM.
RW
This involves a function available
in DVD-RW.
R
This involves a function available
in DVD-R.
CD
This involves a function available
in a data CD (CD-R or CD-RW).
JPEG
This involves a function available
in CD-R/-RW or DVD-R/-RW/-RAM
discs.
MP3
This involves a function available
in CD-R/-RW or DVD-R/-RW/-RAM
discs.
Caution
This involves a case where a
function does not operate or
settings may be canceled.
PLAYER
This involves a function available
when the PLAYER tray is selected.
RECORDER
This involves a function available
when the RECORDER tray is
selected.
NOTE
This involves tips or instructions
on the page that help each
function operate.
One-Touch A function that can be operated
button
by using only one button.
ANYKEY
button
A function that can be operated
by using ANYKEY button.
About the use of this user’s manual
1) Be sure to be familiar with Safety Instructions before
using this product. (See pages 2~6)
2) If a problem occurs, check the Troubleshooting.
(See pages 109~112)
10 - English
How to use the
TWIN TRAY DVD RECORDER
Step 1
Select the disc type
This device can record on the following types of
discs.
If you want to repeatedly record on the same disc
or you want to edit the disc after recording, select a
rewritable DVD-RW or DVD-RAM type disc. If you
want to save a recording without any changes,
choose a non-rewritable DVD-R.
Step 2
Format the disc to start recording
Unlike a VCR, the TWIN TRAY DVD RECORDER
automatically starts formatting when an unused
disc is inserted. This is required for the preparation
of recording on a disc.
Using a DVD-RAM
This type of disc can be formatted in DVD-Video
Recording format (VR mode). You can edit
recorded video and create a playlist and edit video
in a specific sequence according to your
requirements.
Using a DVD-RW
This type of disc can be formatted in either DVDVideo format (V mode) or DVD-Video Recording
format (VR mode). For an unused disc, a message
that asks whether to format in VR Mode or not is
displayed. You can play a Video mode disc on
various DVD components. A VR mode disc allows
more varied editing.
Using a DVD-R
This type of disc can be formatted in DVD Video
format. After formatting is complete, you can record
on the disc. You can play this type of discs on
various DVD components only when they have
been finalized.
00627D-DVD-TR520_XAA_1-16
■
NOTE
■
2005.7.26
7:20 AM
Step 5
Editing a recorded disc
Editing on discs is easier than conventional video
tapes. The TWIN TRAY DVD RECORDER supports
many different edit functions, possible only with DVDs.
With a simple and easy edit menu, you can operate
various edit functions, such as delete, copy, rename,
lock, etc., on a recorded title.
Step 3
Recording
There are two different recording methods, Direct
Recording and Timer Recording. Timer recording is
classified as a Date : Once, Daily or Weekly.
Recording mode : XP (high quality mode), SP
(standard quality mode), LP (long recording mode),
and EP (extended mode) according to the recording
mode. When recording is set in the FR(Flexible
recording mode), the best quality picture is recorded
with regards to the remaining time on the disc and
length of the Timer Recording.
During recording, a title is created between two
points where you start and stop recording.
Chapters will be created automatically when you
finalize recording on DVD-RW/-R discs in Video
mode.
The chapter’s length (interval between chapters)
varies according to the recording mode.
Step 4
Playing
You can select the title you want to play in a
displayed menu and then immediately start
playback.
A DVD consists of sections, called titles, and sub
sections, called chapters.
Creating a playlist (DVD-RAM/-RW in VR mode.)
With this TWIN TRAY DVD RECORDER you can
create a new playlist on the same disc and edit it
without the change of the original recording.
■
NOTE
The Edit functions of the Title List and
Playlist are available only in the R Tray.
Step 6
Finalizing & Playing on
other DVD components
To play your DVD on other DVD components,
finalizing may be necessary. First, finish all editing and
recording operations, then finalize the disc.
When using a DVD-RW disc in VR Mode
Although finalizing is generally unnecessary when
playing the disc on a VR Mode compatible
component, a finalized disc should be used for
playback on that type of component.
When using a DVD-RW disc in Video Mode
The disc should be finalized first to enable playback
on anything other than this TWIN TRAY DVD
RECORDER. No more editing or recording can be
made on the disc once it has been finalized.
To enable recording on the disc again, disc should be
unfinalized.
When using a DVD-R disc
You should finalize the disc to play it on a component
other than this TWIN TRAY DVD RECORDER. You
cannot edit or record on the disc once it has been
finalized.
■
NOTE
P tray can play finalized DVD-R or DVDRW(V) discs. If you want to play
unfinalized DVD-R or DVR-RW(V) discs,
they must be inserted in the R tray.
English - 11
Getting Started
You can only use either the VR or Video
mode on a DVD-RW, but not both at the
same time.
You can change the DVD-RW format to
another format by reinitializing. It should
be noted that the disc's data will be lost
when changing formats.
Page 11
00627D-DVD-TR520_XAA_1-16
2005.7.26
7:20 AM
Page 12
Getting Started
Unpacking
Accessories
Setting the Remote Control
Check for the supplied accessories below.
You can control certain functions of another
manufacturer’s TV with this remote control.
Control function buttons involve: TV POWER,
CH
, TV VOL + -, number buttons, TV MUTE,
INPUT button.
Video/Audio Cable
(AC39-00073A)
Remote Control
(AK59-00023P)
Instruction Manual
(AK68-00627D)
RF Cable for TV
(AC39-42001J)
Batteries for Remote
Control (AAA Size)
(AC43-12002H)
Quick Guide
(AK68-00890A)
Preparing the Remote Control
Install Batteries in the Remote Control
• Open the battery cover on the back of the remote control.
• Insert two AAA batteries. Make sure that the polarities
(+ and -) are aligned correctly.
• Replace the battery cover.
If the remote does not operate properly:
• Check the polarity + - of the batteries (Dry-Cell)
• Check if the batteries are drained.
• Check if remote sensor is blocked by obstacles.
• Check if there is any fluorescent lighting nearby.
Dispose of batteries according to local environmental
regulations. Do not put them in the household trash.
12 - English
00627D-DVD-TR520_XAA_1-16
2005.7.26
7:20 AM
Page 13
Controlling TVs with the Remote Control
1. Press and hold the TV POWER button.
2. Enter a 2-digit code by using the number buttons on
the remote control.
BRAND
AIWA
ANAM
BANG & OLUFSEN
BLAUPUNKT
BRANDT
BRIONVEGA
CGE
CONTINENTAL EDISON
DAEWOO
EMERSON
FERGUSON
FINLUX
FORMENTI
FUJITSU
GRADIENTE
GRUNDIG
HITACHI
IMPERIAL
JVC
LG
LOEWE
LOEWE OPTA
MAGNAVOX
METZ
MITSUBISHI
MIVAR
NEC
NEWSAN
NOBLEX
NOKIA
NORDMENDE
PANASONIC
PHILIPS
PHONOLA
PIONEER
RADIOLA
RADIOMARELLI
RCA
REX
SABA
SALORA
SAMSUNG
SANYO
SCHNEIDER
BUTTON
82
10, 11, 12, 13, 14, 15, 16, 17, 18
57
71
73
57
52
75
19, 20, 23, 24, 25, 26, 27, 28, 29, 30, 31,
32, 33, 34
64
73
06, 49, 57
57
84
70
49, 52, 71
60, 72, 73, 75
52
61, 79
06, 19, 20, 21, 22, 78
06, 69
06, 57
40
57
06, 48, 62, 65
52, 77
83
68
66
74
72, 73, 75
53, 54, 74, 75
06, 55, 56, 57
06, 56, 57
58, 59, 73, 74
06, 56
57
45, 46
74
57, 72, 73, 74, 75
74
01,02,03,04,05,06,07,08,09
41, 42, 43, 44, 48
06
BUTTON
74
36, 37, 38, 39, 48
71
57
57
35, 48
73
67, 73, 75, 76
72, 73, 75
80, 81
47, 48, 49, 50, 51, 52
57
06
63
Getting Started
See “Controllable TV Codes”
If the code works, your TV set will be turned on or off.
If it does not respond, try other codes.
Controllable TV Codes.
BRAND
SELECO
SHARP
SIEMENS
SINGER
SINUDYNE
SONY
TELEAVA
TELEFUNKEN
THOMSON
THOMSON ASIA
TOSHIBA
WEGA
YOKO
ZENITH
■
If several codes are indicated for your
television brand, try each one in turn until
you find one that works.
■
If you replace the remote control's
batteries, you must set the brand code
again.
NOTE
Then you can control the television using the following
buttons after the TV button.
Button
TV POWER
INPUT
TV VOL (+ -)
CH (
)
TV MUTE
Number buttons
■
NOTE
Function
Used to switch the television on and off.
Used to select an external source.
Used to adjust the volume of the television.
Used to select the desired channel.
Used to toggle the sound on and off.
Used to input number directly.
The functions listed above will not
necessarily work on all televisions. If you
encounter problems, operate the television
directly.
English - 13
00627D-DVD-TR520_XAA_1-16
2005.7.26
7:20 AM
Page 14
Getting Started
Description
Front Panel
1. POWER BUTTON
Turns the TWIN TRAY DVD RECORDER
on and off.
2. R (Record) TRAY
Opens to accept a disc.
3. OPEN/CLOSE BUTTON
Opens and closes the R Tray
4. DIRECT COPY BUTTON
Copy Titles and Disc from the disc
in the P Tray to the disc in the R Tray.
5. OPEN/CLOSE BUTTON
Opens and closes the P Tray.
6. SELECT BUTTONS
Select R or P Tray.
7. P (Play) TRAY
Opens to accept a disc.
8. AV 2 INPUT
Connect external equipment.
9. DV-IN
Connect external digital equipment with a DV
jack. (such as a camcorder)
10. INPUT BUTTON
Select input signal in external input mode.
(Tuner, AV1, AV2 or DV)
11. P.SCAN BUTTON
Selects the progressive scan mode.
12. REC/REC MODE/PAUSE/CH BUTTONS
Select to start recording, to set the
Recording time and picture quality, or to
pause a recording.
Select preset TV channels. Same as CH
button on the remote control.
13. PLAY/PAUSE/SEARCH/SKIP BUTTONS
Plays a disc, pauses playback or recording,
goes to the next title/chapter/track, or goes
back to the previous title/chapter/track.
Front Panel Display
1. Lights when a disc is loaded.
2. Lights in the record mode.
3. Lights to indicate the timer record mode.
14 - English
4. Lights when a -R/RW/RAM disc is loaded.
5. Playing time/clock/current status indicator.
6. Lights in the progressive scan mode.
00627D-DVD-TR520_XAA_1-16
2005.7.26
10:4 AM
Page 15
Rear Panel
Getting Started
Fan
The fan always revolves when the power is on.
Ensure a minimum of 4” clear space on all sides of the
fan when installing the product.
1. DIGITAL AUDIO OUT(OPTICAL)
Connects to an amplifier having a digital optical
audio input jack.
2. COMPONENT VIDEO OUT(best video quality)
Connects to equipment having Component video
input jacks.
3. AV VIDEO OUT(good video quality)
Connects to the Video input of external
equipment using a Composite Video cable.
4. AV AUDIO OUT
Connects to the audio input of external
equipment using audio cables.
6. S-VIDEO OUT(better video quality)
Connects the input of external equipment using
an S-Video cable.
7. AV 1 VIDEO IN
Connects to the video output of external
equipment using a video cable.
8. AV 1 AUDIO IN
Connects to the audio output of external
equipment using audio cables.
9. ANT IN/ANT OUT (TO TV)
Connects antenna cables.
5. S-VIDEO IN
Connects the output of external equipment using
an S-Video cable.
■
NOTE
The Antenna connection does not pass the
DVD's output signal. To watch a DVD on your
TV, you must connect audio/video cables.
English - 15
00627D-DVD-TR520_XAA_1-16
2005.7.26
7:20 AM
Tour of the Remote Control
Getting Started
1
20
Page 16
13. ENTER/DIRECTION Buttons (…†œ √ Buttons)
14. RETURN Button
15. INFO Button
This will display current setting or disc status.
16. REC Button
Use to make a recording on DVD-RAM/-RW/-R discs.
2
3
21
4
5
22
17. DIRECT COPY
Press this when you copy from the P tray to the R Tray.
To start copying, press the COPY button on the title list
screen or press the COPY button during the playback.
23
24
18. REPEAT Button
Allows you to repeat a title, chapter, track or disc.
25
26
7
19. REC PAUSE Button
Use this to pause during recording.
9
27
28
21. AUDIO/TV MUTE Button
Use this to access various audio functions on a disc (DVD
mode).
This operates as sound mute. (TV mode)
6
7
8
9
10
11
12
29
13
14
30
15
31
16
32
17
33
18
34
19
35
1. DVD POWER Button
2. NUMBER Buttons
3. 100+ Button
Press this to select channel 100 or higher.
4. R Button
Press this to operate R tray(Recorder).
5. P Button
Press this to operate P tray(Player).
6. TV VOL Button
TV volume adjustment
7. REVERSE/FORWARD SKIP Buttons
Press to skip a disc backwards or forwards.
8. REVERSE/FORWARD STEP Buttons
Each press will play one-frame forward or reverse.
9. REVERSE/FORWARD SEARCH Buttons
Press to search a disc backwards or forwards.
20. TV POWER Button
22. INPUT Button
Select line input signal in external input mode. (Tuner,
AV1, AV2 or DV)
23. TV Button
Press this to operate TV.
24. OPEN/CLOSE Button
To open and close the disc tray.
25. CM SKIP Button
The unit can be set to automatically skip a portion of the
program during playback of a DVD disc.
26. CH Button
Use this to select a TV channel.
27. PLAY/PAUSE Button
Press to play/pause a disc.
28. PLAY LIST/TITLE MENU Button
Use this to return to the Title menu, or to view the
recorded Playlist.
29. ANYKEY Button
View and select the applicable features under current
status.
30. CANCEL Button
31. SUBTITLE Button
Press this to switch the DVD’s subtitle language.
32. TIMER Button
Press to directly enter the Timer Recording Mode menu.
33. MARKER Button
Use this to bookmark or mark a position while playing a
disc.
10. STOP Button
Press to stop a disc or to stop the recording.
34. REPEAT A-B Button
11. TITLE LIST/DISC MENU Button
Use this to return to the Disc menu, or to view the
recorded Title List.
35. REC MODE Button
12. MENU Button
Brings up the TWIN TRAY DVD RECORDER’s setup
menu.
16 - English
Allows you to repeat a title, chapter, track or disc.
Use this to set the desired Recording time and picture
quality. (XP/SP/LP/EP)
00627D-DVD-TR520_XAA_17-24
2005.7.26
10:1 AM
Connecting &
Setting up
Quick Overview
A Quick Overview presented in this guide will give
you enough information to start using the TWIN
TRAY DVD RECORDER.
Step 1 : Connecting the Antenna cable
†
Step 2 : Connecting the Video cable
†
Step 3 : Connecting the Audio cable
†
Step 4 : Connecting External devices
†
Step 5 : Connecting the Power cord
Quick Overview . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Step 1: Connecting the Antenna Cable . . . . . . . . .18
Step 2 : Connecting the Video cable . . . . . . . . . . .20
Step 3 : Connecting the Audio cable . . . . . . . . . . .22
Step 4 : Connecting External devices . . . . . . . . . .23
Step 5 : Connecting the Power Cord . . . . . . . . . . .24
• Note to CATV system installer: This reminder is
provided to call CATV system installer’s attention to
Article 820-40 of the National Electrical Code
(Section 54 of Canadian Electrical Code, Part I),
that provides guidelines for proper grounding and,
in particular, specifies that the cable ground shall
be connected to the grounding system of the
building as close to the point of cable entry as
practical.
English - 17
Connecting & Setting up
This section involves various methods of
connecting the TWIN TRAY DVD RECORDER
to other external components and required
initial setting modes.
Page 17
00627D-DVD-TR520_XAA_17-24
2005.7.26
10:1 AM
Page 18
Connecting & Setting up
Step 1: Connecting the
Antenna Cable
Method 1 : Antenna + TWIN TRAY
DVD RECORDER + TV : No Cable
box
You can record non-scrambled channels by selecting
the channel on the TWIN TRAY DVD RECORDER.
Also use this Method if you watch channels without a
cable box.
There are several ways to connect your TWIN TRAY DVD
RECORDER. Select the antenna that best suits you below.
• Method 1 : Antenna + TWIN TRAY DVD RECORDER + TV : No
Cable box
• Method 2 : Antenna +Cable box + TWIN TRAY DVD
RECORDER + TV : Cable box with many scrambled channels
• Method 3 : Antenna + TWIN TRAY DVD RECORDER + Cable
box +TV : Cable box with a few scrambled channels
■
NOTE
If you are using an off-air antenna that
has 300-ohm twin flat leads, use an
external antenna connector (300-75 ohm
adaptor : not supplied) to connect the
antenna to the TWIN TRAY DVD
RECORDER.
To ANT IN
To ANT OUT
TV
RF Cable
TO ANT INPUT
■
If you have two separate antennas (one
VHF and the other UHF), use a UHF/VHF
combiner-adaptor (available at most
electronics shops) to connect the antenna
to the TWIN TRAY DVD RECORDER.
■
The ANT OUT RF OUT jack of this
product sends only signals received
through the antenna. It does not output
Audio/Video signals. You must connect
Audio/Video cables to view Video from
the unit. (i.e. DVD playback)
18 - English
00627D-DVD-TR520_XAA_17-24
2005.7.26
10:1 AM
Page 19
Method 2 : Antenna + Cable box +
TWIN TRAY DVD RECORDER + TV :
Cable box with many scrambled
channels
You can record channels by selecting the channel on
the cable box. You cannot record one channel while
watching another channel. Be sure that the cable box is
turned on.
Method 3 : Antenna + TWIN TRAY
DVD RECORDER + Cable box + TV :
Cable box with a few scrambled
channels
You can record non-scrambled channels by selecting
the channel on the cable box. You cannot record
scrambled channels that require a cable box.
Connecting & Setting up
Wall
Wall
Cable box
To ANT IN
To ANT IN
To ANT OUT
To ANT OUT
Cable box
TV
RF Cable
TV
RF Cable
To ANT INPUT
To ANT INPUT
English - 19
00627D-DVD-TR520_XAA_17-24
2005.7.26
10:1 AM
Step 2 : Connecting the Video
cable
Connecting & Setting up
There are several ways to connect your TWIN TRAY DVD
RECORDER. Select one of the following video connecting
that best suits you below.
• Method 1 : Connecting to a Video input jack
• Method 2 : Connecting to an S-video input jack
• Method 3 : Connecting to Component video input jacks
Page 20
Method 1 : Connecting to a Video
input jack
Connect a video(yellow) cable between the
VIDEO(yellow) OUT jack on TWIN TRAY DVD
RECORDER and VIDEO(yellow) IN jack on the TV (or
AV amplifier).
• You will enjoy regular quality images.
• Connect audio cables(white and red) between the
AUDIO OUT jacks on the TWIN TRAY DVD
RECORDER and AUDIO IN jacks on TV(or AV
amplifier).
(See pages 22~23)
S-Video, Component video and Progressive Output Modes
• S-Video and Component video output are available only if your
TV supports S-Video input or Component video input,
respectively. If S-Video or Component video output does not
work, check the TV connections and the TV input selection
settings. (For information on how to connect to a TV, see page
18.)
• Progressive Scan Output (480p)
“Consumers should note that not all high definition television
sets are fully compatible with this product and may cause
artifacts to be displayed in the picture. If you experience 480p
progressive scan picture problems, it is recommended that the
user switch the connection to the ‘standard definition’ output. If
there are questions regarding our TV set compatibility with this
model, please contact our customer service center at 1-800SAMSUNG.
• The VHF/UHF RF OUT jack of this product sends only signals
received through the antenna. It does not output audio/video
signals. You must use one of the following audio/video
connections on this unit.
20 - English
Video/Audio Cable
• Compared to standard interlaced video, progressive scan
doubles the amount of video lines fed to your TV, resulting in a
more stable, flicker-free, and clear image than interlaced video.
The progressive scan video output jack is used in progressive
output mode. This is only available with TVs that support
progressive scan.
yellow
yellow
00627D-DVD-TR520_XAA_17-24
2005.7.26
10:1 AM
Page 21
Method 2 : Connecting to an
S-Video input jack
Connect an S-Video cable(not supplied) between the SVIDEO OUT jack on TWIN TRAY DVD RECORDER
and S-VIDEO IN jack on your TV (or AV amplifier).
• You will enjoy high quality images. S-Video separates
the picture element into black and white (Y) and color
(C) signals to present clearer images than regular
video input mode.
1. Connect Component video cables(not supplied)
between the COMPONENT OUT(Y,PB,PR) jacks on
TWIN TRAY DVD RECORDER and COMPONENT
IN(Y,PB,PR) jacks on your TV.
2. Connect audio cables (white and red) between the
AUDIO OUT jacks on the TWIN TRAY DVD
RECORDER and AUDIO IN jacks on TV (or AV
amplifier). (See pages 22~23).
3. After connecting, refer to the pages 37 to 38.
• You will enjoy high quality and accurate color
reproduction images.
■
NOTE
Make sure that the color coded
connections match. The Y, PB, PR
component output jacks of your TWIN
TRAY DVD RECORDER must be
connected to the exact corresponding
component input jacks on your TV.
English - 21
Connecting & Setting up
• Connect audio cables(white and red) between the
AUDIO OUT jacks on the TWIN TRAY DVD
RECORDER and AUDIO IN jacks on TV(or AV
amplifier).
(See pages 22~23)
Method 3 : Connecting to
Component video input
jacks(Y,PB,PR)
00627D-DVD-TR520_XAA_17-24
2005.7.26
10:1 AM
Page 22
Step 3 : Connecting the Audio
cable
Method 2 : Connecting to a stereo
amplifier with analog input jacks
If your stereo amplifier only has AUDIO INPUT jacks
(L and R), use the AUDIO OUT jacks.
Connecting & Setting up
There are several ways to connect your TWIN TRAY
DVD RECORDER. Select the audio connection that
best suits you below.
• Method 1 : Connecting to your TV
• Method 2 : Connecting to a stereo amplifier (analog audio out)
• Method 3 : Connecting to an AV amplifier with a digital input jack
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol
are trademarks of Dolby Laboratories.
white
red
“DTS” and “DTS Digital Out” are trademarks of
Digital Theater Systems, Inc.
red
white
Method 1 : Connecting to your TV
This connection will use your TV’s speakers.
Front(R)
speaker
white
red
white
red
22 - English
Front(L)
speaker
00627D-DVD-TR520_XAA_17-24
2005.7.26
10:1 AM
Method 3: Connecting to an AV
amplifier with a digital input jack
If your AV amplifier has a Dolby Digital or DTS decoder
and a digital input jack, use this connection. To enjoy
Dolby Digital or DTS sound, you will need to set up the
audio settings. (See page 36)
Page 23
Step 4 : Connecting External
devices
This allows you to connect your TWIN TRAY DVD
RECORDER to other external devices and view or
record their outputs.
• Method 2 : Connecting a Camcorder to the AV 2 IN jacks
• Method 3 : Connecting a Camcorder to the DV IN jack
Method 1 : Connecting a VCR, SetTop Box(STB) or DVD player to the
AV 1 IN jacks
Connecting a VCR or external device to AUDIO/VIDEO
AV 1 IN jacks of the TWIN TRAY DVD RECORDER.
You can record from connected equipment (VCR, STB
or DVD).
Rear(L)
Rear(R)
Front(L)
Front(R)
Subwoofer
Center
or
■
You can also use the AV 2 IN jacks on
the front panel of the TWIN TRAY DVD
RECORDER.
■
You must choose S-Video or Composite
in setup menu (See page 38).
■
Copy protected content cannot be
recorded.
NOTE
English - 23
Connecting & Setting up
• Method 1 : Connecting a VCR, Set-Top Box(STB) or DVD player
to the AV 1 IN jacks
00627D-DVD-TR520_XAA_17-24
2005.7.26
10:1 AM
Page 24
Method 2 : Connecting a
Camcorder to the AV 2 IN jacks
You can also use the AV 2 IN jacks on the front panel of
the TWIN TRAY DVD RECORDER. You can record
from connected equipment, such as a camcorder.
Connecting & Setting up
When an input source (such as a camcorder) is inserted
into AV 2 IN while viewing TV, the input will be switched
to AV 2 IN automatically. If the input is not selected
automatically, press the INPUT button to select proper
input.
Step 5 : Connecting the
Power Cord
After all connections are complete, plug the power cord
in the wall outlet.
“Auto” appears in the panel display. This means
that the current time is being set automatically
(Auto Program) through the antenna under
connection and also the channel is being set.
The setup may take a few minutes.
When the TWIN TRAY DVD RECORDER operates
normally, the current time is automatically set and
displayed in the front panel display.
■
NOTE
Method 3 : Connecting a
Camcorder to the DV IN jack
If your camcorder has a DV output jack, connect it to the
DV input jack of your TWIN TRAY DVD RECORDER.
■
NOTE
The input setting will automatically
change to DV when the camcorder is
connected and powered on.
24 - English
After the current time is set automatically,
the TWIN TRAY DVD RECORDER will
perform Auto Channel Memory for about
3 minutes. If power is on, while Auto
Channel Memory is in process, Auto
Channel Memory will stop. In this case,
do Auto Channel Memory from MENU
(See page 29).
00627D-DVD-TR520_XAA_25-41
2005.7.26
7:28 AM
System Setup
Page 25
On-Screen Menu
Navigation
The on-screen menus allow you to enable or disable
various functions on your TWIN TRAY DVD
RECORDER.
Use the following buttons to open and navigate
through the on-screen menus.
Setup
No Disc
Title
Music
Photo
System
√
Language
√
Audio
√
Video
√
Parental Control
√
System Setup
Timer Record
Setup
MOVE
On-Screen Menu Navigation . . . . . . . . . . . . . . . . . . .25
OSD Language Setup . . . . . . . . . . . . . . . . . . . . . . . .26
SELECT
1
MENU Button
2
…†, œ √ Buttons
Auto Clock Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
RETURN
EXIT
Press this button on the remote control to open
the on-screen menu.
Press again to exit the on-screen menu.
Press these buttons on remote control to move
the selection bar …†, œ √ to cycle through the
menu options.
Manual Clock Set . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Auto Channel Memory . . . . . . . . . . . . . . . . . . . . . . .29
Manual Channel Set . . . . . . . . . . . . . . . . . . . . . . . . .30
3
ENTER Button
4
RETURN Button
Press this button on the remote control to confirm any
new settings.
Auto Power Off Setting . . . . . . . . . . . . . . . . . . . . . . .31
CM Skip Time Setting . . . . . . . . . . . . . . . . . . . . . . . .31
EP Mode Time Setting . . . . . . . . . . . . . . . . . . . . . . .32
Setting up the Front Display Options . . . . . . . . . . . .33
Press this button on the remote control to return to
the Previous menu screen displayed or to exit the
on-screen menu.
Automatic Chapter Creator . . . . . . . . . . . . . . . . . . . .34
Setting up the Language Options . . . . . . . . . . . . . . .35
Setting up the Audio Options . . . . . . . . . . . . . . . . . . .36
Setting up the Video display Options . . . . . . . . . . . .37
Setting up the Progressive scan . . . . . . . . . . . . . . . .38
Canceling the Progressive scan . . . . . . . . . . . . . . . .39
Setting up the Parental Control . . . . . . . . . . . . . . . . .40
English - 25
00627D-DVD-TR520_XAA_25-41
2005.7.26
7:28 AM
OSD Language Setup
After plugging in the TWIN TRAY DVD RECORDER,
the first time you press the POWER button, this screen
comes up.
(This screen will only appear when you plug in the
TWIN TRAY DVD RECORDER for the first time.)
1
Page 26
Auto Clock Set
This menu is used to set the current time.
You need to set the time to use timer recording.
1
With the unit in Stop mode / No Disc mode, press
the MENU button.
Press the DVD POWER button.
Title
No Disc
System Setup
Title
2
Press a number button to select the desired
language.
Press ENTER or Right button
for Title List.
Music
Photo
Timer Record
Setup
MOVE
SELECT
RETURN
EXIT
Press 1 for English
Touche 2 pour Français
Pulse 3 para Español
2
Press the …† buttons to select Setup, then press
the ENTER or √ button.
Setup
No Disc
Title
Music
■
NOTE
If the language for the startup screen is not
set, the settings may change whenever you
turn the power on or off. Therefore, make
sure that you select the language you
want to use.
Photo
System
√
Language
√
Audio
√
Video
√
Parental Control
√
Timer Record
Setup
MOVE
3
SELECT
RETURN
EXIT
Press the …† buttons to select System, then
press the ENTER or √ button.
• System menu will be displayed.
System
No Disc
√
Clock Set
Title
√
Channel Set
Music
Photo
Timer Record
Auto Power Off : Off
√
CM Skip Time
: 15 Sec
√
EP Mode Time
: 6 Hour
√
Front Display
: Auto Dim
√
Chapter Creator : Off
√
Setup
MOVE
26 - English
SELECT
RETURN
EXIT
00627D-DVD-TR520_XAA_25-41
2005.7.26
7:28 AM
Page 27
Clock Data CH
4
Press the …† buttons to select Clock Set, then
press the ENTER or √ button.
Clock Set
Select a channel that carries a time signal using the
…† buttons, then press the ENTER button.
• Select Auto to set the clock data channel
automatically.
No Disc
Title
Auto Clock Set
√
Manual Clock Set
√
Clock Data CH
No Disc
Music
Title
Photo
Select channel :
Auto
Music
Timer Record
Photo
Setup
MOVE
SELECT
RETURN
EXIT
Timer Record
Setup
MOVE
Press the …† buttons to select Auto Clock Set,
then press the ENTER or √ button.
Press the …† buttons to select On, then press
the ENTER or √ button.
RETURN
EXIT
Time Zone
Select the time zone of your area using the …†
buttons then press the ENTER or √ button.
• Select Automatic to set the time zone
automatically.
Auto Clock Set
No Disc
Title
Music
Photo
Auto Clock Set
: On
Off
√
Clock Data CH
: Automatic
On
√
Time Zone
: Automatic
√
Daylight Saving
: Automatic
√
Auto Clock Set
No Disc
Title
Music
Timer Record
Photo
Setup
MOVE
SELECT
RETURN
EXIT
Auto Clock Set
Automatic
: On
√
Clock Data CH
Atlantic
: Automatic
√
Time Zone
Eastern
: Automatic
√
Daylight Saving
Central
: Automatic
√
Mountain
Pacific
Timer Record
Alaska
Setup
Hawaii
MOVE
■
NOTE
7
If your clock is set to the wrong time zone
or daylight saving, you can adjust these
settings without turning off the Auto Clock
Set function.
Select the sub menu(Clock Data CH, Time Zone
or Daylight Saving) using the …† buttons, then
press the ENTER or √ button.
Auto Clock Set
Title
Photo
√
: Automatic
√
Time Zone
: Automatic
√
Daylight Saving
: Automatic
√
Clock Data CH
Music
: On
EXIT
Select Automatic, No or Yes using the …† buttons
then press the ENTER or √ button.
• Select Automatic to set the daylight saving
automatically.
Auto Clock Set
No Disc
Music
Photo
No Disc
RETURN
Daylight Saving
Title
Auto Clock Set
SELECT
Auto Clock Set
: On
√
Clock Data CH
: Automatic
√
Time Zone
: Automatic
√
Daylight Saving
: Automatic
Automatic
√
No
Timer Record
Yes
Setup
MOVE
SELECT
RETURN
EXIT
Timer Record
Setup
MOVE
SELECT
RETURN
EXIT
English - 27
System Setup
5
6
SELECT
00627D-DVD-TR520_XAA_25-41
2005.7.26
7:28 AM
Page 28
Manual Clock Set
5
Press the …† buttons to select Manual Clock
Set, then press the ENTER or √ button.
Manual Clock Set
No Disc
Title
If your clock cannot be set automatically, set the clock
manually.
Date
Music
Time
JAN / 01 / 2005 SAT 12 : 00 AM
Photo
Timer Record
Setup
1
With the unit in Stop mode / No Disc mode, press
the MENU button.
2
Press the …† buttons to select Setup, then press
the ENTER or √ button.
System Setup
Setup
No Disc
Title
Music
Photo
System
√
Language
√
Audio
√
Video
√
Parental Control
√
Timer Record
Setup
MOVE
SELECT
RETURN
0~9 NUMBER
6
SELECT
…† : Sets the value
You can set the value using the number
buttons.
EXIT
Press the …† buttons to select System, then
press the ENTER or √ button.
• System menu will be displayed.
System
No Disc
Title
Music
Photo
Timer Record
Clock Set
√
Channel Set
√
Auto Power Off : Off
√
CM Skip Time
: 15 Sec
√
EP Mode Time
: 6 Hour
√
Front Display
: Auto Dim
√
√
Chapter Creator : Off
Setup
MOVE
4
SELECT
RETURN
EXIT
Press the …† buttons to select Clock Set, then
press the ENTER or √ button.
Clock Set
No Disc
Title
Auto Clock Set
√
Manual Clock Set
√
Music
Photo
Timer Record
Setup
MOVE
28 - English
SELECT
RETURN
EXIT
EXIT
Use the …†œ √ buttons to select the Current
Date and Current Time, and then press the
ENTER button.
When the current time is stored in memory and
then the set is powered off, the current time will
appear in the front panel display.
œ √: Moves to items
3
RETURN
00627D-DVD-TR520_XAA_25-41
2005.7.26
7:28 AM
Page 29
Auto Channel Memory
4
Press the …† buttons to select Channel Set,
then press the ENTER or √ button.
Channel Set
No Disc
Antenna/Cable TV
Title
You can set the Antenna/Cable TV settings
automatically.
Music
√
: Cable TV
Auto Channel Memory
√
Channel Add/Delete
√
Photo
Timer Record
1
With the unit in Stop mode / No Disc mode, press
the MENU button.
2
Press the …† buttons to select Setup, then press
the ENTER or √ button.
Setup
MOVE
5
SELECT
RETURN
EXIT
Press the …† buttons to select Antenna/Cable
TV, then press the ENTER or √ button.
Setup
Title
Music
Photo
System
√
Language
√
Audio
√
Video
√
Parental Control
√
No Disc
Antenna/Cable TV
: Cable
TV
Antenna
Auto Channel Memory Cable TV
Channel Add/Delete
Title
Music
√
√
√
Photo
Timer Record
Timer Record
Setup
Setup
MOVE
SELECT
RETURN
EXIT
MOVE
3
SELECT
RETURN
EXIT
Select the item that matches the antenna
connection you selected on pages 18~19(Method
1, 2 and 3).
Press the …† buttons to select System, then
press the ENTER or √ button.
• System menu will be displayed.
6
Select Antenna or Cable TV(depending on the
hookup you chose) using the …† buttons, then
press the ENTER or √ button.
7
Select Auto Channel Memory using the …†
buttons, then press the ENTER or √ button.
Auto Channel Memory will be performed.
System
No Disc
Title
Music
Photo
Timer Record
Clock Set
√
Channel Set
√
Auto Power Off : Off
√
CM Skip Time
: 15 Sec
√
EP Mode Time
: 6 Hour
√
Front Display
: Auto Dim
√
Chapter Creator : Off
√
Setup
MOVE
SELECT
RETURN
Auto Channel Memory
EXIT
No Disc
Title
Music
Total channel numbers:
15/125
Saved channel :
11%
Photo
Scanning...
Stop
Timer Record
Setup
SELECT
■
NOTE
RETURN
EXIT
Press the RETURN or ENTER button to
stop Auto Channel Memory.
English - 29
System Setup
Channel Set
No Disc
00627D-DVD-TR520_XAA_25-41
2005.7.26
7:28 AM
Page 30
Manual Channel Set
5
Press the …† buttons to select Channel
Add/Delete, then press the ENTER or √ button.
Channel Add/Delete
No Disc
Title
Select channel :
Music
Manual Channel Set can be used after you have first
performed Auto Channel Memory. Use the Manual
Channel Setting to delete unnecessary channels after
using the Auto Channel Memory.
With the unit in Stop mode / No Disc mode, press
the MENU button.
2
Press the …† buttons to select Setup, then press
the ENTER or √ button.
System Setup
1
01
Photo
Timer Record
Add
Delete
Setup
MOVE
6
SELECT
RETURN
EXIT
Press the …† or number buttons to select the
channels you want to add or delete on the Select
channel screen. Then, press the ENTER button.
Channel Add/Delete
No Disc
Title
Select channel :
Music
Setup
No Disc
Title
Music
Photo
System
√
Language
√
Audio
√
Video
√
Parental Control
√
02
Channel is added.
Photo
Timer Record
Add
Delete
Setup
MOVE
SELECT
RETURN
EXIT
Timer Record
Setup
MOVE
3
SELECT
RETURN
Press the …† buttons to select System, then
press the ENTER or √ button.
• System menu will be displayed.
System
No Disc
√
Clock Set
Title
Photo
Timer Record
Auto Power Off : Off
√
CM Skip Time
: 15 Sec
√
EP Mode Time
: 6 Hour
√
Front Display
: Auto Dim
√
√
Chapter Creator : Off
Setup
MOVE
4
SELECT
RETURN
EXIT
Press the …† buttons to select Channel Set,
then press the ENTER or √ button.
Channel Set
No Disc
Antenna/Cable TV
Title
Music
: Cable TV
√
Auto Channel Memory
√
Channel Add/Delete
√
Photo
Timer Record
Setup
MOVE
30 - English
SELECT
• Using CH (
) buttons for channel selection
jumps to the next channel memorized in Auto
Channel Memory.
7
Press the œ √ buttons to select Add or Delete,
then press the ENTER button.
• The message “Channel is added.” or “Channel is
deleted.” will be displayed in the center of the
screen.
√
Channel Set
Music
• Using …† buttons for channel selection allows
the user to add/delete one channel at a time.
EXIT
RETURN
EXIT
• Continue to add or delete as many channels as
you want to memorize or delete. This can be
used to add channels not stored automatically
due to weak signal strength.
• Press the RETURN button to return to the
previous menu. Press the MENU button to exit
the menu.
00627D-DVD-TR520_XAA_25-41
2005.7.26
7:28 AM
Page 31
Auto Power Off Setting
5
Press the …† buttons to select the desired item,
then press the ENTER or √ button.
• Off : Auto power off is disabled.
• 2 Hour : TWIN TRAY DVD RECORDER will
automatically turn off 2 hours after the
last button is pressed.
• 6 Hour : TWIN TRAY DVD RECORDER will
automatically turn off 6 hours after the
last button is pressed.
If turn off time set by automatic Power off function
is reached during playback or recording, the
device will operate until the playback or recording
is over.
This feature automatically turns off your TWIN TRAY
DVD RECORDER, if you do not press any button for
the selected time.
1
With the unit in Stop mode / No Disc mode, press
the MENU button.
2
Press the …† buttons to select Setup, then press
the ENTER or √ button.
Title
Music
Photo
System
√
Language
√
Audio
√
Video
√
Parental Control
√
CM Skip Time Setting
Timer Record
Setup
MOVE
3
SELECT
RETURN
EXIT
Press the …† buttons to select System,
then press the ENTER or √ button.
System menu will be displayed.
When a program recorded on a DVD-RAM, a DVD-RW,
or a DVD-R is played, the unit can be set to automatically
skip a portion of the program corresponding to a CM
(commercial) skip time set by the user.
1
With the unit in Stop mode / No Disc mode, press
the MENU button.
2
Press the …† buttons to select Setup, then press
the ENTER or √ button.
System
No Disc
Title
Music
Photo
Timer Record
Clock Set
√
Channel Set
√
Auto Power Off : Off
√
CM Skip Time
: 15 Sec
√
EP Mode Time
: 6 Hour
√
Front Display
: Auto Dim
√
No Disc
√
Title
Chapter Creator : Off
Setup
MOVE
SELECT
RETURN
EXIT
Setup
Music
Photo
System
√
Language
√
Audio
√
Video
√
Parental Control
√
Timer Record
Setup
4
Press the …† buttons to select Auto Power Off,
then press the ENTER or √ button.
MOVE
SELECT
RETURN
EXIT
System
No Disc
Title
Music
Photo
Timer Record
Clock Set
√
Channel Set
√
Auto Power Off : Off
Off
√
CM Skip Time
: 152 Sec
Hour
√
EP Mode Time
: 6 6Hour
Hour
√
Front Display
: Auto Dim
√
Chapter Creator : Off
√
Setup
MOVE
SELECT
RETURN
EXIT
English - 31
System Setup
Setup
No Disc
00627D-DVD-TR520_XAA_25-41
3
2005.7.26
7:28 AM
Press the …† buttons to select System, then
press the ENTER or √ button.
System menu will be displayed.
Page 32
■
CM Skip can be performed only during
normal playback.
■
When the time set is more than the
remaining time of a current title: The next
title is played from the beginning.
■
When the time set is more than a
remaining time of a play list, the next
scene is played.
■
CM Skip does not work in a still picture
mode.
■
When a set time is less than the
remaining time of a scene, the last title,
or the last track that is displayed
currently, a prohibition mark appears.
■
CM Skip releases Repeat (including
Repeat A-B, Chapter, and Title).
■
CM Skip may not operate with some
DVD-Video discs.
NOTE
System
No Disc
Title
Music
Photo
Timer Record
Clock Set
√
Channel Set
√
Auto Power Off : Off
√
CM Skip Time
: 15 Sec
√
EP Mode Time
: 6 Hour
√
Front Display
: Auto Dim
√
√
Chapter Creator : Off
Setup
MOVE
System Setup
4
SELECT
RETURN
EXIT
Press the …† buttons to select CM Skip Time,
then press the ENTER or √ button.
System
No Disc
√
Clock Set
Title
√
Channel Set
Music
Photo
Timer Record
Auto Power Off : Off
√
CM Skip Time
: 1515Sec
Sec
√
EP Mode Time
: 6 30
Hour
Sec
√
Front Display
: Auto
Dim
60 Sec
√
Chapter Creator : Off
√
Setup
MOVE
SELECT
RETURN
EXIT
EP Mode Time Setting
5
Press the …† buttons to select the desired time
interval, then press the ENTER or √ button.
6
If you press the CM SKIP button during playback,
the section corresponding to the set time is
skipped, and then the next section is played.
You can select one of four recording modes by pressing
the REC MODE button repeatedly.
EP mode is one of four REC modes (XP, SP, LP, EP)
In EP(Extended Play) mode, you can set recording time
to 6 or 8 hours.
1
With the unit in Stop mode / No Disc mode, press
the MENU button.
2
Press the …† buttons to select Setup, then press
the ENTER or √ button.
Setup
No Disc
Title
Music
Photo
System
√
Language
√
Audio
√
Video
√
Parental Control
√
Timer Record
Setup
MOVE
32 - English
SELECT
RETURN
EXIT
00627D-DVD-TR520_XAA_25-41
3
2005.7.26
7:28 AM
Press the …† buttons to select System, then
press the ENTER or √ button.
System menu will be displayed.
Page 33
Setting up the Front
Display Options
System
No Disc
Title
Music
Photo
Timer Record
Clock Set
√
Channel Set
√
Auto Power Off : Off
√
CM Skip Time
: 15 Sec
√
EP Mode Time
: 6 Hour
√
Front Display
: Auto Dim
√
√
Chapter Creator : Off
Setup
MOVE
4
SELECT
You can adjust the brightness of the unit’s front panel
display.
RETURN
EXIT
Press the …† buttons to select EP Mode Time,
then press the ENTER or √ button.
1
With the unit in Stop mode / No Disc mode, press
the MENU button.
2
Press the …† buttons to select Setup, then press
the ENTER or √ button.
Setup
Title
No Disc
Title
Music
Photo
Timer Record
Clock Set
√
Channel Set
√
Auto Power Off : Off
√
CM Skip Time
: 15 Sec
√
EP Mode Time
: 6 6Hour
Hour
: Auto
Dim
8 Hour
√
Front Display
Chapter Creator : Off
Music
Photo
System
√
Language
√
Audio
√
Video
√
Parental Control
√
Timer Record
Setup
√
MOVE
√
SELECT
RETURN
EXIT
Setup
MOVE
5
SELECT
RETURN
EXIT
Press the …† buttons to select the desired time,
then press the ENTER or √ button.
3
Press the …† buttons to select System, then
press the ENTER or √ button.
System menu will be displayed.
System
No Disc
Title
Music
Photo
Timer Record
Clock Set
√
Channel Set
√
Auto Power Off : Off
√
CM Skip Time
: 15 Sec
√
EP Mode Time
: 6 Hour
√
Front Display
: Auto Dim
√
Chapter Creator : Off
√
Setup
MOVE
SELECT
RETURN
EXIT
English - 33
System Setup
No Disc
System
00627D-DVD-TR520_XAA_25-41
4
2005.7.26
7:28 AM
Page 34
Press the …† buttons to select Front Display,
then press the ENTER or √ button.
3
Press the …† buttons to select System, then
press the ENTER or √ button.
System menu will be displayed.
System
System
No Disc
Clock Set
Title
Channel Set
Music
Photo
Timer Record
√
DVD-RW(V)
√
Title
Auto Power Off : Off
√
CM Skip Time
: 15 Sec
√
EP Mode Time
: 6 Hour
Bright
: Auto
Dim
√
Front Display
Setup
√
Channel Set
Photo
√
√
Dim
Chapter Creator : Off
√
Clock Set
Music
Timer Record
Auto Power Off : Off
√
CM Skip Time
: 15 Sec
√
EP Mode Time
: 6 Hour
√
Front Display
: Auto Dim
√
√
Chapter Creator : Off
Auto Dim
Setup
MOVE
SELECT
RETURN
EXIT
MOVE
System Setup
5
Press the …† buttons to select the desired item,
then press the ENTER or √ button.
• Bright : Makes the Front Panel Display bright.
• Dim : Makes the Front Panel Display dim.
• Auto Dim : Makes the Front Panel Display dim
automatically when the set is
powered off.
■
NOTE
4
SELECT
RETURN
EXIT
V mode allows you to make a disc that
will play in all DVD players.
VR mode only allows playback on DVD
recorders.
Press the …† buttons to select Chapter Creator,
then press the ENTER or √ button.
System
DVD-RW(V)
Music
Photo
Timer Record
Auto Power Off : Off
√
CM Skip Time
: 15 Sec
√
EP Mode Time
: 6 Hour
√
Front Display
Off Dim
: Auto
√
On
Chapter Creator : Off
5
2
Press the …† buttons to select Setup, then press
the ENTER or √ button.
SELECT
RETURN
Press the …† buttons to select Off or On, then
press the ENTER or √ button.
Press the MENU button to exit the menu.
6
Press the REC button to start recording. (See
pages 73~74 to set the recording speed) The
message “Do you want to create the chapter
menu after this recording?” is displayed.
Title
DVD-RW(V)
Title
Press ENTER or Right button
for Title List.
Music
Do you want to create the chapter menu
Photo
after this recording?
Timer Record
Yes
Setup
MOVE
34 - English
SELECT
RETURN
EXIT
EXIT
• Off: Select this option when you do not want
Automatic Chapter Creator.
• On: Select this option when you want Automatic
Chapter Creator.
(V mode)
1
√
Setup
MOVE
With the unit in Stop mode / No Disc mode, press
the MENU button.
√
Channel Set
Automatic Chapter
Creator
A DVD-Video consists of ‘Titles’ and ‘Chapters’. When
you record one program, it makes one Title.
If you use this function, the Title will be divided into
Chapters.
√
Clock Set
Title
No
00627D-DVD-TR520_XAA_25-41
7
2005.7.26
7:28 AM
Page 35
Setting up the Language
Options
Press the œ √ buttons to select Yes and press
the ENTER button.
• A new chapter is created according to the selected
recording mode. A chapter will be about 5 minutes
long in XP and SP, and about 15 minutes long in LP
and EP mode.
8
Press the STOP button to stop recording.
9
To display the created titles, finalize the disc
(See pages 106~107) and then press the TITLE
MENU button. Title menu will be displayed.
If you set the On-Screen menu, disc menu, audio and
subtitle language in advance, they will come up
automatically every time you watch a movie.
If the selected language is not recorded on the disc, the
original pre-recorded language is selected.
With the unit in Stop mode / No Disc mode, press
the MENU button.
2
Press the …† buttons to select Setup, then press
the ENTER or √ button.
Setup
No Disc
Title
Previous
Top
Next
Music
Photo
System
√
Language
√
Audio
√
Video
√
Parental Control
√
Timer Record
10
Setup
To display the created chapters, select the
desired Title and then press the DISC MENU
button. The chapter menu for the selected Title
will be displayed.
MOVE
3
CHAPTER
SELECT
RETURN
EXIT
Press the …† buttons to select Language, then
press the ENTER or √ button.
Language setup menu will be displayed.
Language
No Disc
Music
Previous
Top
Next
: Original
√
Subtitle
: Automatic
√
Disc Menu
: English
√
On-Screen menu
: English
√
Audio
Title
Photo
Timer Record
Setup
■
The Automatic Chapter Creator function does
not work during Timer Recording or when you
turn the power off.
■
The Automatic chapter creator function may
not operate depending on the status of
recording.
Caution
MOVE
SELECT
RETURN
EXIT
English - 35
System Setup
1
00627D-DVD-TR520_XAA_25-41
4
2005.7.26
7:28 AM
Page 36
Press the …† buttons to select the desired
language option, press the ENTER or √ button.
Setting up the Audio
Options
Language
No Disc
Audio
Title
Subtitle
Music
Original
: Original
English
: Automatic
Français
Disc Menu
: English
On-Screen menu Deutsch
: English
Español
Photo
√
√
√
√
Italiano
Timer Record
You can connect the TWIN TRAY DVD RECORDER to
an external amp or Home theater.
The following allows you to setup the Audio device and
sound status depending on the audio system in use.
Nederlands
Setup
Korean
System Setup
MOVE
SELECT
RETURN
EXIT
• Audio : For the disc audio language.
• Subtitle : For the disc subtitles.
• Disc Menu: For the disc menu contained on the
disc.
• On-Screen Menu: For the on-screen menu of your
TWIN TRAY DVD RECORDER.
1
With the unit in Stop mode / No Disc mode, press
the MENU button.
2
Press the …† buttons to select Setup, then press
the ENTER or √ button.
Setup
No Disc
5
Title
Press the …† buttons to select the desired
language, then press the ENTER or √ button.
Music
Photo
Timer Record
System
√
Language
√
Audio
√
Video
√
Parental Control
√
Install
√
Setup
MOVE
■
NOTE
■
Press the RETURN or œ button to return
to the previous menu. Press the MENU
button to exit the menu.
3
The selected language will only appear if
it is supported on the disc.
SELECT
RETURN
EXIT
Press the …† buttons to select Audio, then press
the ENTER or √ button.
Audio setup menu will be displayed.
Audio
No Disc
Title
Music
Digital Output
: PCM
√
DTS
: Off
√
Dynamic Compression : On
√
Photo
Timer Record
Setup
MOVE
RETURN
EXIT
4
Press the …† buttons to select the desired audio
option, then press the ENTER or √ button.
5
Press the …† buttons to select the desired item,
then press the ENTER or √ button.
■
NOTE
36 - English
SELECT
Press the RETURN or œ button to return
to the previous menu.
Press the MENU button to exit the menu.
00627D-DVD-TR520_XAA_25-41
2005.7.26
7:28 AM
Page 37
Digital Output
1. PCM : Select this when your equipment is not
Dolby digital compatible.
2. Bitstream : Outputs Dolby Digital (or MPEG-2)
audio as bitstream. Select this
when your AV receiver or AV
amplifier has a Dolby Digital (or
MPEG-2) Decoder.
■
NOTE
■
Digital output setting is equally applied to
both Dolby Digital and MPEG-2 audio.
LPCM sound track is always output as
PCM. It cannot be changed with the
Digital Output setting.
Be sure to select the correct Digital
Output or you will hear no sound or a
loud noise.
Setting up the Video
display Options
This function allows you to set up the TV screen
settings. This function depends on disc type. It may
not work for some disc types.
With the unit in Stop mode / No Disc mode, press
the MENU button.
2
Press the …† buttons to select Setup, then press
the ENTER or √ button.
Setup
DTS
No Disc
Title
Music
1. Off : Doesn’t output DTS signal. Select this
when your AV receiver or AV amplifier
does not have a DTS decoder.
Photo
NOTE
When DTS soundtrack is played, sound
is not output from the AV Audio Output.
It only outputs from the Digital Audio Out.
√
Language
√
Audio
√
Video
√
Parental Control
√
Timer Record
Setup
2. On : Outputs DTS Bitstream via the digital
output when you play DTS track. Select
this only when your AV receiver (or AV
amplifier) has a DTS decoder.
■
System
MOVE
3
SELECT
RETURN
EXIT
Press the …† buttons to select Video, then press
the ENTER or √ button.
Video setup menu will be displayed.
Video
No Disc
Title
Music
Photo
Dynamic Compression
: 16:9 Wide √
Input Level
: Lighter
√
Black Level
: 0 IRE
√
3D Noise Reduction : Off
√
AV1 Video Input
√
: CVBS
Timer Record
This is only active when a Dolby Digital signal is
detected.
1. On : When Movie soundtracks are played at
low volume or from smaller speakers, the
system can apply appropriate
compression to make low-level content
more intelligible and prevent dramatic
passages from getting too loud.
TV Aspect
Setup
MOVE
4
SELECT
RETURN
EXIT
Press the …† buttons to select the desired video
option, then press the ENTER or √ button.
Video
No Disc
2. Off : You can enjoy the movie with the
standard Dynamic Range.
Input Level
√
:4:3
16:9
WideBox
Letter
:4:3
Lighter
Pan/Scan√
Black Level
:16:9
0 IRE
Wide
3D Noise Reduction : Off
√
AV1 Video Input
√
TV Aspect
Title
Music
Photo
: CVBS
√
Timer Record
Setup
MOVE
SELECT
RETURN
EXIT
English - 37
System Setup
1
00627D-DVD-TR520_XAA_25-41
2005.7.26
12:15 PM
Page 38
3D Noise Reduction (motion
adaptive noise reduction)
Press the …† buttons to select the desired item,
then press the ENTER or √ button.
5
1. Off : Normal
2. On : Provides a cleaner picture through noise
reduction (for recording).
■
NOTE
Press the RETURN or œ button to return
to the previous menu.
Press the MENU button to exit the menu.
AV1 VIDEO Input
1. Composite:AV1 Video Input is Composite.
2. S-Video:AV1 Video Input is S-Video.
TV Aspect
System Setup
Depending on the type of television you have,
you may want to adjust the screen setting.
(aspect ratio)
1. 4:3 Letter Box : Select
when you want to see the
total 16:9 ratio screen the
DVD supplies, even
though you have a TV
with a 4:3 ratio screen.
Black bars will appear at
the top and bottom of the screen.
2. 4:3 Pan/Scan : Select
this for conventional size
TV when you want to see
the central portion of the
16:9 screen. (Extreme left
and right side of movie
picture will be cut off.)
3. 16:9 Wide : You can view
the full 16:9 picture on
your widescreen TV.
Input Level
Adjusts the level of the input signal.
1. Darker : If you feel the screen is too light and
you want to make the sceen darker.
2. Lighter : If you feel the screen is too dark and
you want to make the sceen lighter.
■
NOTE
Set the AV1 Video input setting to
correspond to the input source.
Setting up the
Progressive scan
If the TV supports Progressive Scan, press the P.SCAN
button on the front of the TWIN TRAY DVD RECORDER
to enjoy. If you select ‘progressive scan mode’, the
component cable has to be connected at first. (See
page 21)
Be sure the Component cables are connected properly.
1
With the unit in Stop mode / No Disc mode, press the
P.SCAN button on the front of the TWIN TRAY DVD
RECORDER.
The message “Press [Yes] to confirm Progressive
scan mode. Otherwise, press [No].” will appear.
Press the œ √ buttons to select Yes, and then
press the ENTER button.
Black Level
Adjusts the black level of the screen.
1. 0 IRE : This is the standard NTSC reference
black level for consistent brightness/
contrast across all sources.
Select this when you want darker
screen.
2. 7.5 IRE : This will enhance the black level for
increased brightness/contrast when
viewing DVDs. Select this when you
want lighter screen.
38 - English
Press [Yes] to confirm Progressive scan mode.
Otherwise, press [No].
Yes
No
00627D-DVD-TR520_XAA_25-41
2
2005.7.26
12:16 PM
The message “Please, set your TV to Progressive
input. To deactivate, press [STOP] key.” will
appear. Press the ENTER button.
Please, set your TV to Progressive input,
To deactivate, press [STOP] key.
Page 39
Canceling the
Progressive scan
1
OK
3
With the unit in Stop mode / No Disc mode, press the
P.SCAN button on the front of the TWIN TRAY DVD
RECORDER.
The message “Press [Yes] to confirm Interlace
scan mode. Otherwise, press [No].” will appear.
Press the œ √ buttons to select Yes, and then
press the ENTER button.
The message “Video Output Mode Progressive
Scan” will appear.
System Setup
Press [Yes] to confirm Interlace scan mode.
Otherwise, press [No].
Yes
No
Video Output Mode
Progressive Scan
2
■
NOTE
■
If the P.SCAN button on the TWIN TRAY
DVD RECORDER’s front panel is
pressed during playback, the message
“This function is possible only on stop
mode” appears on the screen.
The message “Please, set your TV to Interlace
input. To deactivate, press [STOP] key.” will
appear. Press the ENTER button.
Please, set your TV to Interlace input,
To deactivate, press [STOP] key.
OK
Progressive setting is only available when
the TWIN TRAY DVD RECORDER is in
stop mode.
3
The message “Video Output Mode Interlace Scan”
will appear and the Progressive Scan mode will be
canceled.
Video Output Mode
Interlace Scan
English - 39
00627D-DVD-TR520_XAA_25-41
■
NOTE
■
2005.7.26
12:19 PM
Do not press the P.SCAN button if you are
using a TV that does not support Progressive
mode. Nothing will be displayed on the screen
if pressed.
If you press the P.SCAN button by mistake
when your TV does not support Progressive
mode, you need to release the Progressive
mode. To release the Progressive mode,
press the P.SCAN button on the front panel
3 times. The screen will recover after the
PS indicator on the front panel display
turns off.
Page 40
Enter the 4-digit password using the number
buttons on the remote control.
The“Confirm the password” message will be
displayed. Enter your password again.
4
Parental Control
No Disc
Title
Confirm the password
Music
Photo
Timer Record
Setup
System Setup
0~9 NUMBER
Setting up the Parental
Control
SELECT
RETURN
EXIT
Press the ENTER or √ button to select Password.
5
Parental Control
No Disc
Password
Title
The Parental Control function works in conjunction with
DVDs that have been assigned a rating which helps you
control the types of DVDs that your family watches.
There are up to 8 rating levels on a disc.
With the unit in Stop mode / No Disc mode, press
the MENU button.
2
Press the …† buttons to select Setup, then press
the ENTER or √ button.
√
Photo
Timer Record
Setup
MOVE
1
: Off
Off
On
Music
RETURN
EXIT
Press the …† buttons to select On or Off, then
press the ENTER or √ button.
6
■
NOTE
Setup
SELECT
Press the RETURN or œ button to return
to the previous menu.
Press the MENU button to exit the menu.
No Disc
Title
Music
Photo
System
√
Language
√
Audio
√
Video
√
Parental Control
√
If you forgot your password
Timer Record
Setup
MOVE
3
SELECT
RETURN
EXIT
Press the …† buttons to select Parental Control,
then press the ENTER or √ button.
Parental Control
No Disc
Title
Create the password
Music
Photo
Timer Record
Setup
0~9 NUMBER
40 - English
SELECT
RETURN
EXIT
1
Remove all discs and set the unit to P(Play) mode.
2
Press and hold the Forward Skip (
) button on
the front panel for 5 seconds or more.
00627D-DVD-TR520_XAA_25-41
2005.7.26
7:28 AM
Page 41
About the Rating Level
1
About the Change Password
Press the …† buttons to select Rating Level,
then press the ENTER or √ button.
1
Press the …† buttons to select Change Password,
then press the ENTER or √ button.
Parental Control
No Disc
Parental Control
Title
Music
Password
: On
√
Rating Level
: Level 1-Kids
√
No Disc
Title
√
Change Password
Photo
Music
Timer Record
Photo
√
Password
: On
Rating Level
√
: Level 8 (Adults)√
√
Change Password
Timer Record
Setup
MOVE
SELECT
RETURN
Setup
EXIT
MOVE
SELECT
RETURN
EXIT
Parental Control
No Disc
Change Password
Title
Level 8-Adults√
: On
Rating Level
Level8 7(Adults)√
√
: Level
Change Password
Level 6
No Disc
Title
√
Level 5
Photo
Enter the password
Music
Level 4
Photo
Level 3
Timer Record
Level 2
Setup
Timer Record
Level 1-Kids
MOVE
SELECT
RETURN
Setup
EXIT
0~9 NUMBER
2
Press the …† buttons to select the rating level
you want, then press the ENTER or √ button.
3
When you operate your TWIN TRAY DVD
RECORDER for the first time, the “Create the
Password” message will be displayed.
For example, if you select up to Level 6, discs that
contain Level 7, 8 will not play. A larger number
indicates that the program is intended for adult
use only.
2
SELECT
RETURN
EXIT
Enter the 4-digit password using the number
buttons on the remote control.
The “Confirm the password” message will be displayed.
Change Password
No Disc
Title
Confirm the password
Music
Photo
Timer Record
Setup
0~9 NUMBER
3
SELECT
RETURN
EXIT
Enter your password again using the number
buttons on the remote control.
■
See page 40 if you forgot your password.
NOTE
English - 41
System Setup
Music
Password
00627D-DVD-TR520_XAA_42-56
2005.7.27
4:47 AM
Page 42
Before Playing
Playback
Read the following information before playing a disc.
This section introduces basic functions of
playback and playback by disc type.
Dolby Digital
DTS
Region code (DVD-Video only)
Both the DVD RECORDER and the discs are coded by
region. These regional codes must match in order for the disc
to play. If the codes do not match, the disc will not play. The
Region Number for this DVD RECORDER is described on the
rear panel of the DVD RECORDER.
Digital Audio
Disc types that can be played
Stereo
Disc Types
NTSC broadcast
system in U.S.A,
Canada, Korea,
Japan,etc.
MP3
DVD-VIDEO
Playback
AUDIO-CD
DVD-RAM
DVD-RW
Before Playing .....................................................................42
Playing a Disc......................................................................43
Using the Disc Menu & Title Menu ....................................44
DVD-R
Using the Search & Skip Functions...................................45
Slow Motion Play/Step Motion Play...................................46
CD-RW/-R
DVD-RAM/
-RW/-R
About ANYKEY ...................................................................46
Playing the Title List ............................................................48
Disc Logo Recorded content
Disc Shape
Max. Playing Time
Single sided(5”)
240
Double sided(5”)
480
AUDIO + VIDEO
Single sided(3.5”)
80
Double sided(3.5”)
160
Single sided(5”)
74
AUDIO
Single sided(3.5”)
20
1 (XP: Excellent Quality)
Single-sided 2 (SP: Standard Quality)
5” (4.7GB) 4 (LP: Long Playback)
6 or 8 (EP:Extended)
AUDIO + VIDEO
2 (XP: Excellent Quality)
Double-sided 4 (SP: Standard Quality)
5” (9.4GB) 8 (LP: Long Playback)
12 or 16 (EP:Extended)
1 (XP: Excellent Quality)
2 (SP: Standard Quality)
AUDIO + VIDEO
5” (4.7GB)
4 (LP: Long Playback)
6 or 8 (EP:Extended)
1 (XP: Excellent Quality)
2 (SP: Standard Quality)
AUDIO + VIDEO
5” (4.7GB)
4 (LP: Long Playback)
6 or 8 (EP:Extended)
JPEG
MP3
-
-
Navigation Menu .................................................................49
Using the Markers...............................................................52
Using the Bookmarks..........................................................54
Selecting the Subtitle Language ........................................56
Selecting the Soundtracks & Audio Channels ..................57
Changing the Camera Angle..............................................58
Repeat Play.........................................................................58
Zooming-In...........................................................................60
Select Tray...........................................................................61
Playing an Audio CD/MP3..................................................61
Playing a Picture .................................................................68
42 - English
Discs that cannot be played
•
•
•
•
•
•
•
•
DVD-Video with a region number other than “1” or “ALL”
12cm 2.6 GB and 5.2 GB DVD-RAM
3.9 GB DVD-R Disc for Authoring.
DVD-RAM/-RW(VR mode) not recorded following the Video Recording Standard
Unfinalized DVD-R,unfinalized DVD-RW(V mode) recorded on other equipment.
PAL Disc
DVD-ROM/DVD+RW/DVD+R/PD//MV-Disc/DiVX Video Disc, etc.
CVD/SVCD/CD-ROM/CDV/CD-G/CD-I/SACD CD Layer
00627D-DVD-TR520_XAA_42-56
■
NOTE
■
■
■
■
■
■
2005.7.26
7:32 AM
Page 43
This TWIN TRAY DVD RECORDER can only
operate with discs that are compatible with
DVD-RAM Standard Version 2.0.
Playback and/or recording may not work for
some types of discs, or when specific
operations, such as angle change and
aspect ratio adjustment, are being
performed. Please refer to information about
the discs written in detail on the box.
Do not allow the disc to become dirty or
scratched, finger prints, dirt, dust, scratches
or deposits of cigarette smoke on the
recording surface may make it impossible to
use the disc for recording.
To protect a DVD-RAM disc from damage,
use a cartridge.
DVD-RAM/-RW/-R discs may not be able to
play on some DVD players, depending on
the player, disc and the condition of the
recording.
Discs with PAL programs recorded on them
cannot be recorded using this product.
P tray can play finalized DVD-R or DVDRW(V) disc. If you want to play unfinalized
DVD-R or DVR-RW(V) disc, you must only
insert disc on R tray.
Playing a Disc
Playback
1
Press the OPEN/CLOSE button.
2
Place a disc gently into the tray with the disc’s
label facing up.
English - 43
00627D-DVD-TR520_XAA_42-56
3
2005.7.26
12:22 PM
Press OPEN/CLOSE button to close the disc tray.
• Your TWIN TRAY DVD RECORDER closes the
disc tray and plays the disc automatically.
• The TWIN TRAY DVD RECORDER does not
Page 44
Using the Disc Menu &
Title Menu
play discs automatically after the initial power on.
• When the TWIN TRAY DVD RECORDER is
•
•
•
•
4
powered on and a disc is in the tray, the unit will
be activated and wait in stop status.
Press the PLAY( ) button to start playback.
If you insert an MP3 Disc, your TWIN TRAY
DVD RECORDER will display the file list on the
screen and start playing.
If you insert a JPEG Disc, folders and files are
displayed in the thumbnail picture.
If you want the unit to play automatically when it
is powered on with a disc in the unit, power on
with the PLAY( ) button.
Press the STOP(
■
Playback
NOTE
Some type of discs contain a dedicated menu system that
allows you to select special functions for title, chapter, audio
track, subtitle, film preview, information on characters, etc.
For DVD-VIDEO discs
1
• Move to the setup menu related to the playback
operation.
• You can select the audio language and the subtitles
provided by the disc.
) button to stop playback.
When you stop playing back a disc, the
TWIN TRAY DVD RECORDER remembers
where you stopped, so when you press
PLAY( ) button again, it will pick up where
you left off. (Unless the disc is removed or
the TWIN TRAY DVD RECORDER is
unplugged, or if you press the STOP( )
button twice.).
Press the DISC MENU button to enter the disc's
menu.
2
Press the TITLE MENU button to move to the disc's
title menu.
• Use this button if the disc contains more than one
title.
Some type of discs may not support the title menu
function.
For DVD-RAM/-RW/-R Disc
■
Caution
■
■
■
■
■
■
Do not move your TWIN TRAY DVD
RECORDER while playing, as this may
cause damage to the disc.
Make sure to press the OPEN/CLOSE
button to open or close the disc tray.
Do not push the disc tray while it is being
opened or closed, as this may cause a
product malfunction.
Do not place foreign materials on or in the
disc tray.
Some functions may perform differently or
be disabled depending on the disc type.
If this occurs, refer to the instructions
written on the disc case.
Be especially careful that children's fingers
are not caught between the disc tray and
the tray chassis when it closes.
You must only insert one DVD disc at a
time. Inserting two or more discs will not
allow playback and may cause damage to
the TWIN TRAY DVD RECORDER.
44 - English
1
Press the TITLE LIST button to display title list.
■
NOTE
■
Title List : Title List is a list of previously
recorded programs. If a title is
deleted, that title cannot be played
again.
Play List : This refers to a list of user-selected
titles. When one playlist is played,
only the scene selected by the
user will play and then stop. Since
only the information necessary for
playing a desired scene is included
in a playlist, even if that playlist is
deleted, the original recording will
not be deleted. (only VR mode)
00627D-DVD-TR520_XAA_42-56
2005.7.26
12:22 PM
Page 45
Using the Search & Skip
Functions
Skipping Chapters, a Tracks or
Markers
During play, you can search quickly through a chapter
or track.
Searching through a Chapter or
Track
1
During play, press the SEARCH (
the remote control.
DVD-VIDEO/
DVD-RAM/-RW/-R
AUDIO CD
(CD-DA)
Fast X 2 ➞
Fast X 8 ➞
Fast X 32 ➞
X2➞
) buttons on
Fast X 4 ➞
Fast X 16 ➞
Fast X 128
X4➞
During play, press the SKIP (
remote control.
1
) buttons on the
• If you press the SKIP ( ) button,
it moves to the beginning of the chapter or track or
marker(DVD-RAM/-RW(VR mode)).
Pressing the button once again within 3 seconds
returns to the beginning of the previous chapter or
track or marker(DVD-RAM/-RW(VR mode)).
• If you press the SKIP (
) button,
it moves to the next chapter, track or marker
(DVD-RAM/-RW(VR mode)).
X8
■
NOTE
This function will not operate if a selected
title does not have Chapters, Tracks or
Markers.
• When you press and hold the SEARCH (
)
buttons, playback is done at the default speed of
X4. If you release the SEARCH (
) buttons,
playback is performed at a normal speed.
• The speed marked in this function may be
different from the actual playback speed.
■
NOTE
No sound is heard during Scan(Search)
mode, except when using CDs (CD-DA).
English - 45
Playback
• You can scan the program in reverse.
To return to normal speed playback, press the
PLAY ( ) button.
00627D-DVD-TR520_XAA_42-56
2005.7.26
7:32 AM
Page 46
About ANYKEY
Slow Motion Play/
Step Motion Play
Slow Motion Play
The ANYKEY function allows you to easily search for
a desired scene by accessing title, chapter, track,
time. You can also change the subtitle and audio
settings and set some features including Marker,
Angle, Zoom, Repeat, Select Tray, Disc Manager,
Navigation, Rec. mode.
In pause or step mode, press the SEARCH (
the remote control.
• If you press the SEARCH (
Slow 1/8 ➞
Moving to a scene directly using the
ANYKEY
)button,
Slow 1/4 ➞
• If you press the SEARCH (
) buttons on
Slow 1/2
• If you want to move to a title, a chapter or a
track to find a desired scene.
) button,
Playback
Slow 1/8 ➞
Slow 1/4 ➞
Slow 1/2
• To return to normal speed playback, press the
PLAY (
) button.
Press and hold the SEARCH (
) buttons during
pause, the disc will play slowly at a 1/4 speed. If the
button is released, the pause operation will resume.
- Using Title, Chapter or Track -
1
Step Motion Play
Press the ANYKEY button during playback.
Search
Bookmark
Audio
√
Subtitle
√
Angle
√
Repeat
√
Zoom
√
Select Tray
Press the STEP(
in the pause mode.
) buttons on the remote control
• Each time the button is pressed, a new frame will
appear.
When the STEP(
) button is pressed, the previous
2
Press the …† buttons to select Search, then
press the ENTER or √ button.
frame will be activated.
When the STEP(
) button is pressed, the next
frame will be activated.
• To return to normal speed playback, press the PLAY
) button.
(
46 - English
DVD-Video
Title
1/10
Chapter
1/40
Time
MOVE
00:01:45
CHANGE
00627D-DVD-TR520_XAA_42-56
2005.7.26
7:32 AM
3
Press the …† buttons to select Title, Chapter
or Track.
4
Press the œ √ buttons or number buttons to
select the desired scene, then press the
ENTER button.
Page 47
• If you want to move to a desired time following will
help you find a scene.
■
NOTE
■
■
This may not work for some discs. When
an audio CD(CD-DA) or an MP3 disc is
inserted, according to a disc type, the
information display may not be appear.
The Time Search function does not
operate in some discs.
To make the screen disappear, press the
ANYKEY button again
- Using Time -
1
Press the ANYKEY button during playback.
Search
Bookmark
Audio
√
Subtitle
√
Angle
√
Repeat
√
Zoom
√
Select Tray
Playback
2
Press the …† buttons to select Search, then
press the ENTER or √ button.
DVD-Video
Title
1/10
Chapter
1/40
Time
MOVE
00:01:45
CHANGE
3
Press the …† buttons to select Time.
4
Enter the time in the sequence of hours, minutes,
and seconds using the number buttons, then
press the ENTER button.
English - 47
00627D-DVD-TR520_XAA_42-56
2005.7.27
1:11 AM
Page 48
Playing the Title List
2
Press the …† buttons to select an entry you
want to play from Title List, then press the
ENTER or PLAY ( ) button.
The selected entry (title) will be played back.
- About INFO button If you press the INFO button once during playback, Disc
information screen appears.: Displays Total numbers of
Titles and Playlists, Recordable Time(Title), Available
Space(Music/Photo).
Follow these instructions to play back a scene from the
Title List.
Using the TITLE LIST button
1
With the unit in Stop mode/Playback mode, press the
TITLE LIST button.
The Title List screen is displayed.
No.
01
02
03
04
Title
Length
JAN/18/2005 12:15A
JAN/19/2005 12:15A
JAN/20/2005 12:15A
JAN/25/2005 12:15A
01/01 CH7
Disc Info
Total Title
Total Playlist
Recordable Time
Protection
JAN/01/2005 (SAT)
13
None
01:48 SP
Not Protected
AM 12:00
Pressing the INFO button twice, Current playback
information screen appears.: Displays information of
Playback Name, Title, Created Time, Length, Playing
Time, Audio, and if the disc protection is activated.
Title List
DVD-RAM(VR)
DVD-RAM(VR)
Disc Name
00:10:21
00:40:03
00:20:15
00:50:16
JAN/18/2005 12:15 AM CH7
DVD-RAM(VR)
Name
Playback
JAN/18/2005 12:15 AM
LP
1/1 page
MOVE
SELECT
RETURN
EXIT
Title
1/13
Created Time
JAN/01/2005 12:39 AM
Length
00:02:27 LP
Playing Time
00:02:07
Audio
Dolby Digital 2CH
Title Protection
Not Protected
JAN/01/2005 (SAT)
AM 12:00
Using the MENU button.
• With the unit in Stop mode/Playback mode,
press the MENU button.
Title
DVD-RAM(VR)
Press ENTER or Right button
for Title List.
Title
Music
Photo
Timer Record
Setup
MOVE
SELECT
RETURN
EXIT
• Press the …† buttons to select Title, then
press the ENTER or √ button.
48 - English
Playing Info
01/01 CH7
3
To stop title play, press the STOP( )button.
To return the title list screen, press the TITLE
LIST button.
00627D-DVD-TR520_XAA_42-56
2005.7.26
7:32 AM
Page 49
2
Navigation Menu
Press the …† buttons to select an entry you
want to play from Title List, then press the
ANYKEY button.
Title List
DVD-RW(VR)
Rename
Scene Navigation
Protection
Delete
Partlal Delete
If there is a title composed of markers (see page 52),
you can search the desired scene using the Scene
Navigation.
SP
3
01
02
03
04
Title
Length
JAN/18/2005 12:15A
JAN/19/2005 12:15A
JAN/20/2005 12:15A
JAN/25/2005 12:15A
00:10:21
00:40:03
00:20:15
00:50:16
√
Playlist
JAN/18/2005 12:15 AM CH11
√
Navigation
JAN/18/2005 12:15 AM
√
Select Tray
1/1 page
Disc Manager
MOVE
(VR mode)
No.
SELECT
RETURN
EXIT
Press the …† buttons to select Navigation,
then press the ENTER or √ button.
Using the TITLE LIST button
Title List
DVD-RW(VR)
1
Rename
With the unit in Stop mode/Playback mode, press the
TITLE LIST button.
The Title List screen is displayed.
Protection
Delete
Partlal Delete
SP
Title List
001
002
003
004
JAN/18/2005 12:15A
JAN/19/2005 12:15A
JAN/20/2005 12:15A
JAN/25/2005 12:15A
00:10:21
00:40:03
00:20:15
00:50:16
√
Playlist
JAN/18/2005 12:15 AM CH11
√ Scene Navigation
Navigation
JAN/18/2005 12:15 AM
√ Time Navigation
Select Tray
1/1 page
Disc Manager
MOVE
SELECT
RETURN
EXIT
DVD-RW(VR)
JAN/18/2005 12:15A
JAN/19/2005 12:15A
JAN/20/2005 12:15A
JAN/25/2005 12:15A
00:10:21
00:40:03
00:20:15
00:50:16
4
JAN/18/2005 12:15 AM CH7
JAN/18/2005 12:15 AM
SP
1/1 page
MOVE
SELECT
RETURN
Press the …† buttons to select Scene
Navigation, then press the ENTER or √ button.
EXIT
Scene Navigation
DVD-RW(VR)
Using the MENU button.
• With the unit in Stop mode/Playback mode,
press the MENU button.
Title List No. 1
01 00:00:16 01 00:05:16
1/1 Page
Title
MOVE
SELECT
RETURN
EXIT
DVD-RW(VR)
Press ENTER or Right button
for Title List.
Title
Music
Photo
5
Timer Record
Setup
MOVE
SELECT
RETURN
EXIT
Press the …† œ √ buttons to select desired
scene, then press the ENTER or PLAY ( )
button.
• Press the …† buttons to select Title,
then press the ENTER or √ button.
English - 49
Playback
01
02
03
04
00627D-DVD-TR520_XAA_42-56
2005.7.26
7:32 AM
Page 50
Time Navigation
Using the ANYKEY button
1
Using this function, you can search scene
minute-by-minute from the recorded title list.
Press the ANYKEY button during playback.
(VR mode)
Search
√
Navigation
Marker
Subtitle
√
Audio
√
Repeat
√
Using the TITLE LIST button
Zoom
√
Select Tray
Disc Manager
2
1
With the unit in Stop mode/Playback mode, press the
TITLE LIST button.
The Title List screen is displayed.
Press the …† buttons to select Navigation,
then press the ENTER or √ button.
Title List
DVD-RW(VR)
01
02
03
04
Search
√
Navigation
Playback
JAN/18/2005 12:15 AM
Time Navigation
Subtitle
√
Audio
√
Repeat
√
00:10:21
00:40:03
00:20:15
00:50:16
JAN/18/2005 12:15 AM CH7
Scene Navigation
Marker
JAN/18/2005 12:15A
JAN/19/2005 12:15A
JAN/20/2005 12:15A
JAN/25/2005 12:15A
SP
1/1 page
MOVE
SELECT
RETURN
EXIT
Zoom
√
Select Tray
Disc Manager
Using the MENU button.
• With the unit in Stop mode/Playback mode,
press the MENU button.
3
Press the …† buttons to select Scene
Navigation, then press the ENTER or √ button.
Title
DVD-RW(VR)
Scene Navigation
DVD-RW(VR)
Title List No. 1
Press ENTER or Right button
for Title List.
Title
Music
Photo
Timer Record
01 00:00:16 01 00:05:16
Setup
MOVE
SELECT
RETURN
EXIT
1/1 Page
MOVE
SELECT
RETURN
EXIT
• Press the …† buttons to select Title,
then press the ENTER or √ button.
4
Press the …† œ √ buttons to select desired
scene, then press the ENTER or PLAY ( )
button.
■
NOTE
Scene Navigation will not operate if a
selected title does not have Markers.
50 - English
00627D-DVD-TR520_XAA_42-56
2
2005.7.26
7:32 AM
Page 51
Press the …† buttons to select an entry you
want to play from Title List, then press the
ANYKEY button.
1
Title List
HDD
Rename
No.
Protection
01
02
03
04
Copy
Delete
√
Edit
SP
Title
Length
JAN/18/2005 12:15A
JAN/19/2005 12:15A
JAN/20/2005 12:15A
JAN/25/2005 12:15A
Using the ANYKEY button
Press the ANYKEY button during playback.
00:10:21
00:40:03
00:20:15
00:50:16
Search
Marker
1/1 page
Disc Manager
√
Navigation
√
Playlist
JAN/18/2005 12:15 AM CH11
√
Navigation
JAN/18/2005 12:15 AM
√
Select Tray
Subtitle
√
Audio
√
Repeat
√
Zoom
MOVE
SELECT
RETURN
EXIT
√
Select Tray
Disc Manager
3
Press the …† buttons to select Navigation,
then press the ENTER or √ button.
2
Press the …† buttons to select Navigation,
then press the ENTER or √ button.
Title List
HDD
Rename
No.
Protection
01
02
03
04
Copy
Delete
√
Edit
SP
Search
Length
JAN/18/2005 12:15A
JAN/19/2005 12:15A
JAN/20/2005 12:15A
JAN/25/2005 12:15A
Marker
Time Navigation
Subtitle
√
Audio
√
Repeat
√
√
Select Tray
Disc Manager
RETURN
EXIT
Press the …† buttons to select Time
Navigation, then press the ENTER or √ button.
3
Press the …† buttons to select Time
Navigation, then press the ENTER or √ button.
Time Navigation
DVD-RW(VR)
Time Navigation
DVD-RW(VR)
12:15 AM
√
12:15 AM
œ√
12:15 AM
CHANGE
12:25 AM
SELECT
RETURN
EXIT
√
12:15 AM
œ√
CHANGE
12:25 AM
SELECT
RETURN
EXIT
4
5
Press the œ √ buttons to skip one minute at a
time and search the desired scene, then press
the ENTER or PLAY ( ) button.
Press the œ √ buttons to skip one minute at a
time and search the desired scene, then press
the ENTER or PLAY ( ) button.
■
NOTE
■
■
Cursor does not move if selected recorded
title is shorter than 1 minute.
The Navigation function may not work with
discs recorded on another manufacturer's
unit.
An edited title may not display exact
search time.
English - 51
Playback
SELECT
Scene Navigation
Zoom
1/1 page
Disc Manager
√
Navigation
00:10:21
00:40:03
00:20:15
00:50:16
√
Playlist
JAN/18/2005 12:15 AM CH11
√ Scene Navigation
Navigation
JAN/18/2005 12:15 AM
√ Time Navigation
Select Tray
MOVE
4
Title
00627D-DVD-TR520_XAA_42-56
2005.7.26
7:32 AM
Using the Markers
Page 52
2
Press the ENTER button when the desired scene
appears.
• The number 01 is displayed and the scene is memorized.
Marker
01 -- -- -- -- -- -- -- -- --
N:1
(VR mode)
You can set marks on a disc so that you can start
playback from the marked position.
This function is available on the R tray in the VR mode.
Using the MARKER button
1
MOVE
√ PLAY
CANCEL
RETURN
3
Press the œ √ buttons to move to the next position.
4
Press the ENTER button again when the desired
scene appears.
• The number 02 is displayed and the scene is
memorized.
Press the MARKER button during playback.
Marker
-- -- -- -- -- -- -- -- -- --
N:0
Playback
Marker
SELECT
01 02 -- -- -- -- -- -- -- --
N:2
RETURN
Using the ANYKEY button.
MOVE
√ PLAY
CANCEL
RETURN
• Press the ANYKEY button during playback.
Search
Navigation
√
Marker
Subtitle
√
Audio
√
Repeat
√
Zoom
Select Tray
√
Disc Manager
• Press the …† buttons to select Marker,
then press the ENTER or √ button.
52 - English
• DVD-RAM or DVD-RW (VR Mode) discs have the
Marker function instead of the Bookmark function.
The Marker function allows you to mark up to 99
scenes. Since the scenes may be displayed as many
different pages, numbering is necessary. If a disc in
use is encoded with Cartridge Protection or Disc
Protection, Markers cannot be set or deleted. Only
playback is available.
■
NOTE
When the disc tray is opened and then
closed, marks will disappear.
00627D-DVD-TR520_XAA_42-56
2005.7.26
7:32 AM
Page 53
Playing back a marker
Clearing a marker
Using the MARKER button
1
Press the MARKER button during playback.
Marker
MOVE
01 02 -- -- -- -- -- -- -- --
√ PLAY
CANCEL
Using the MARKER button
1
N:2
01 02 03 04 05 06 07 08 09 10 √ N:10
Marker
RETURN
MOVE
√ PLAY
RETURN
Using the ANYKEY button.
• Press the ANYKEY button during playback.
• Press the ANYKEY button during playback.
Search
√
Navigation
√
Navigation
Marker
Marker
Subtitle
√
Subtitle
√
Audio
√
Audio
√
Repeat
√
Repeat
√
Zoom
√
Select Tray
Disc Manager
• Press the …† buttons to select Marker,
then press the ENTER or √ button.
Press the œ √ buttons to select a marked scene.
Marker
√
Select Tray
Disc Manager
01 02 -- -- -- -- -- -- -- --
• Press the …† buttons to select Marker,
then press the ENTER or √ button.
2
Press the œ √ buttons to select a marked scene.
Press the CANCEL button to delete the selected
mark.
N:2
Marker
MOVE
Playback
Zoom
√ PLAY
CANCEL
Press the ENTER or PLAY ( ) button to start
playing from the selected scene.
• If you press the SKIP ( ) button, it moves to
the beginning of the marker. Pressing the button
once again within 3 seconds returns to the
beginning of the previous marker.
• If you press the SKIP (
the next marker.
01 02 03 04 05 06 07 08 09 10 √ N:10
RETURN
MOVE
3
CANCEL
Using the ANYKEY button.
Search
2
Press the MARKER button during playback.
√ PLAY
Marker
MOVE
CANCEL
01 02 03 04 05 06 07 08 09 --
√ PLAY
CANCEL
RETURN
N:9
RETURN
) button, it moves to
English - 53
00627D-DVD-TR520_XAA_42-56
■
2005.7.26
7:33 AM
Page 54
When a marker is cleared while DVD-RAM/RW (VR mode) is playing, marker numbers
will change. For example, if the 7th marker is
cleared after ten markers are registered, the
marker numbers after the eighth will
automatically move ahead by one and the 8th
marker becomes the 7th.
2
Press the ENTER button when the desired scene
appears.
• The number 1 is displayed and the scene is
memorized.
Bookmark 1 - - - - - - - - --
Using the Bookmarks
MOVE
√ PLAY
CANCEL
RETURN
3
Press the œ √ buttons to move to the next
position.
4
Press the ENTER button again when the desired
scene appears.
The number 2 is displayed and the scene is
memorized.
(V-mode)
Playback
Using the MARKER button
1
Press the MARKER button during playback.
Bookmark 1 2 - - - - - - - --
Bookmark - - - - - - - - - --
MOVE
MOVE
SELECT
RETURN
√ PLAY
CANCEL
RETURN
• Repeat above to bookmark other positions.
• You can bookmark up to 10 scenes.
Using the ANYKEY button.
• Press the ANYKEY button during playback.
■
Search
Bookmark
Audio
√
Subtitle
√
Angle
√
Repeat
√
Zoom
Select Tray
√
• Press the …† buttons to select Bookmark, then
press the ENTER or √ button.
54 - English
NOTE
When the disc tray is opened and then
closed, bookmarks will disappear.
00627D-DVD-TR520_XAA_42-56
2005.7.26
7:33 AM
Page 55
Playing back a bookmark
Clearing a bookmark
Using the MARKER button
1
Press the MARKER button during playback.
Using the MARKER button
1
Bookmark 1 2 - - - - - - - --
MOVE
√ PLAY
CANCEL
Press the MARKER button during playback.
Bookmark 1 2 - - - - - - - --
RETURN
MOVE
√ PLAY
CANCEL
RETURN
Using the ANYKEY button.
Using the ANYKEY button.
• Press the ANYKEY button during playback.
• Press the ANYKEY button during playback.
Search
Search
Bookmark
Bookmark
√
Audio
√
Subtitle
√
Subtitle
√
Angle
√
Angle
√
Repeat
√
Repeat
√
Zoom
Select Tray
Playback
Audio
Zoom
√
• Press the …† buttons to select Bookmark, then
press the ENTER or √ button.
2
Press the œ √ buttons to select a bookmarked
scene.
3
Press the ENTER or PLAY(
) button to start
playing from the selected scene.
√
Select Tray
• Press the …† buttons to select Bookmark, then
press the ENTER or √ button.
2
Press the œ √ buttons to select a bookmarked
scene.
Bookmark 1 2 - - - - - - - --
MOVE
3
√ PLAY
CANCEL
RETURN
Press the CANCEL button to delete the selected
bookmark.
English - 55
00627D-DVD-TR520_XAA_42-56
2005.7.26
7:33 AM
Page 56
Selecting the Subtitle
Language
Using the ANYKEY button
1
Press the ANYKEY button during playback.
Selects one of the subtitle languages recorded on the
disc.
Search
Bookmark
Audio
√
Subtitle
√
Angle
√
Repeat
√
Zoom
Select Tray
√
(VR mode)
Using the SUBTITLE button
1
Press the SUBTITLE button during playback.
Subtitle
2
Press the …† buttons to select Subtitle, then
press the ENTER or √ button.
Search
Off
Bookmark
√
Audio
Subtitle
√
Off
Angle
√
KOR
Repeat
√
ENG
Playback
Zoom
Select Tray
2
Press the …† buttons to select the desired
subtitle language. Also, press the SUBTITLE
button repeatedly to select the desired subtitle
language.
• To make the screen disappear, press the CANCEL
or RETURN button.
3
Press the …† buttons to select the desired subtitle
language, then press the ENTER or √ button.
■
NOTE
■
■
56 - English
√
The subtitle display may be different
depending on the disc type.
Some discs allow you to select the
language for the disc menu only.
If the subtitles overlap, disable the caption
function on your TV.
00627D-DVD-TR520_XAA57-70
2005.7.26
12:25 PM
Page 57
Selecting the Soundtracks
& Audio Channels
Using the ANYKEY button
1
Press the ANYKEY button during playback.
Selecting the Audio
Selects one of the soundtracks recorded on the disc.
Also selects the audio channels.
Search
Bookmark
Audio
√
Subtitle
√
Angle
√
Repeat
√
Zoom
Select Tray
(VR mode)
√
Using the AUDIO button
1
Press the AUDIO button during playback.
2
Press the …† buttons to select Audio, then
press the ENTER or √ button.
DVD-VIDEO
Search
Audio
ENG Dolby Digital 5.1CH
Bookmark
Audio
√
ENG Dolby Digital 5.1CH
Subtitle
√
KOR Dolby Digital 5.1CH
Angle
√
Repeat
√
Select Tray
DVD-RAM/-RW
Audio
Dolby Digital 2/0 L + R
3
To select the desired soundtrack or audio channel,
press the …† buttons or press the AUDIO button
repeatedly.
• To make the screen disappear, then press the
CANCEL or RETURN button.
√
Press the …† buttons to select the desired
soundtracks or audio channel, then press the
ENTER or √ button.
■
Soundtracks or Audio channel may be
different because they are disc-specific.
■
Some discs allow you to select the audio
language for the disc menu only.
NOTE
2
Playback
Zoom
English - 57
00627D-DVD-TR520_XAA57-70
2005.7.26
12:25 PM
Changing the Camera
Angle
Page 58
Repeat Play
When a DVD-VIDEO contains multiple angles of a
particular scene, you can select the Angle function.
Playing Repeatedly(Repeat Playback)
Using the REPEAT button
Using the ANYKEY button
1
Press the ANYKEY button during playback.
1
Press the REPEAT button during playback.
Repeat
Off
Search
Bookmark
Audio
√
Subtitle
√
Angle
√
Repeat
√
Zoom
Playback
Select Tray
2
√
Press the …† buttons to select Angle, then
press the ENTER or √ button.
Search
Audio
√
Subtitle
√
Angle
√
Angle1
Repeat
√
Angle 2
Zoom
Angle 3
√
Angle 4
Angle 5
Angle 6
3
Press the …† buttons to select the desired angle,
then press the ENTER or √ button.
■
NOTE
■
This function is disc-dependent, and may
not work on all DVDs.
This function does not work when a DVD
has not been recorded with a multicamera angle system.
58 - English
Press the …† buttons to select the Off, Title or
Chapter you want to play repeatedly, then
press the ENTER button.
Repeat
Bookmark
Select Tray
2
Title
00627D-DVD-TR520_XAA57-70
2005.7.26
10:13 AM
Page 59
Repeat A-B
Using the ANYKEY button
1
Press the ANYKEY button during playback.
Using the REPEAT A-B button
1
Search
Bookmark
Audio
√
Subtitle
√
Angle
√
Repeat
√
Press the REPEAT A-B button during playback.
Repeat A-B
Off
Zoom
Select Tray
2
√
Press the …† buttons to select Repeat, then
press the ENTER or √ button.
2
Search
Bookmark
Audio
Subtitle
Angle
Repeat
√
Repeat Off
Repeat A - B
Zoom
√
Repeat Title
Repeat Chapter
3
Repeat A-B
A-B
Press the …† buttons to select Repeat Off,
Repeat A-B, Repeat Title or Repeat Chapter you
want to play repeatedly, then press the ENTER or
√ button.
■
NOTE
Playback
Select Tray
Press the ENTER button at the point where you
want the repeat play to start (A) and press it again at
the point where you want the repeat play to stop (B).
Repeat playback of the A-B section starts.
DVD-RAM/-RW(VR mode), unfinalized
DVD-R and unfinalized DVD-RW (V mode)
do not repeat a chapter.
English - 59
00627D-DVD-TR520_XAA57-70
2005.7.26
9:31 AM
Page 60
Using the ANYKEY button
1
Zooming-In
Press the ANYKEY button during playback.
Search
Bookmark
Audio
√
Subtitle
√
Angle
√
Repeat
√
1
Zoom
Select Tray
Press the ANYKEY button during playback.
√
Search
Bookmark
2
Press the …† buttons to select Repeat, then
press the ENTER or √ button.
Audio
√
Subtitle
√
Angle
√
Repeat
√
Zoom
Select Tray
√
Search
Bookmark
Audio
Subtitle
Angle
Repeat
√
Select Tray
Repeat Off
Repeat A - B
Zoom
√
Repeat Title
2
Press the …† buttons to select Zoom, then press
the ENTER or √ button. ( ) will be displayed.
3
Press …† œ √ buttons to move to the area you
want to enlarge.
4
Press the ENTER button.
The screen will be enlarged to twice the normal
size. The screen size will be enlarged to four times
the normal size.
Playback
Repeat Chapter
3
Press the …† buttons to select Repeat A-B,
then press the ENTER or √ button.
4
Press the ENTER button at the point where you
want the repeat play to start (A) and press it
again at the point where you want the repeat
play to stop (B).Repeat playback of the A-B
section starts.
■
NOTE
■
■
If you set point (B) before five seconds of
playback time has elapsed, the prohibition
mark ( ) will appear.
You can also return to Normal Playback by
pressing the CANCEL button.
Audio CDs(CD-DA) and MP3 discs do not
support the Repeat A-B function.
DVD-VIDEO/
DVD-RAM/-RW/-R
■
NOTE
60 - English
normal size ➔ X2 ➔ X4 ➔ X2
➔ normal size
When recording is done in the EP mode, the
Zoom function will not be supported except
when the recording has been done in V
mode.
00627D-DVD-TR520_XAA57-70
2005.7.26
9:31 AM
Page 61
Playing an Audio
CD/MP3
Select Tray
1
Playing an Audio CD(CD-DA)
Press the ANYKEY button during playback.
1
Search
Bookmark
Audio
√
Subtitle
√
Angle
√
Repeat
√
Insert an audio CD (CD-DA) into the disc tray.
• The audio CD menu appears and the tracks
(songs) are played automatically.
Zoom
Select Tray
√
Music List
CD
√ 02 : 10
TRACK 1
TRACK 1
2
Press the …† buttons to select Select Tray, then
press the ENTER or √ button.
CD-DA
01/15
04:57
CDDA
TRACK 2
CDDA
TRACK 3
CDDA
TRACK 4
CDDA
TRACK 5
CDDA
TRACK 6
CDDA
TRACK 7
1/3 Page
MOVE
SELECT
RETURN
EXIT
Bookmark
Audio
√
Subtitle
√
Angle
√
Repeat
√
Recorder Tray
Zoom
Select Tray
√
2
Press the …† buttons to select the track (song) you
want to hear, and then press the ENTER button.
Player Tray
Audio CD(CD-DA) Screen Elements
3
Press the …† buttons to select Recorder Tray or
Player Tray, then press the ENTER or √ button.
!
Music List
CD
√ 02 : 10
TRACK 1
$
TRACK 1
@
CD-DA
01/15
04:57
CDDA
TRACK 2
CDDA
TRACK 3
CDDA
TRACK 4
CDDA
TRACK 5
CDDA
TRACK 6
CDDA
TRACK 7
%
1/3 Page
#
MOVE
SELECT
RETURN
EXIT
1. Current track (song): Displays the number of the
track currently being played.
2. Displays the current play index, total track number.
3. Display available buttons.
4. This shows the operating state of a disc and a
playback time corresponding to a portion that is
currently played.
5. Displays the track list (song list).
English - 61
Playback
Search
00627D-DVD-TR520_XAA57-70
2005.7.26
9:31 AM
Page 62
Buttons on the Remote Control
used for Audio CD(CD-DA) playback
Playing an MP3 Disc
Insert an MP3 disc into the disc tray.
• The MP3 menu is displayed and the tracks
(songs) are played automatically.
1
Music List
Bryan Adams.mp3 √ 02 : 10
CD
..
Bryan Adams.mp3
TRAY
R
SELECT
P
TV
INPUT
MP3
01/15
4.0 MB
MP3
Bryan Adams_2.mp3
MP3
Straight from the heart.mp3
MP3
Run to you.mp3
MP3
Heaven.mp3
MP3
This Love.mp3
1/3 Page
MOVE
5
4
6
6
8
7
SELECT
RETURN
EXIT
Press the …† buttons to select the track you want to
hear, and then press the ENTER button.
2
9
1
2
3
Playback
2
MP3 Screen Elements
1
!
Music List
Bryan Adams.mp3 √ 02 : 10
CD
DIRECT COPY
Bryan Adams.mp3
MP3
01/15
4.0 MB
@
1. …†: Selects a track (song).
2. œ √ : Scrolls the page up/down.
3. ENTER button: Plays the selected track (song).
4. SKIP ( ) button: Plays the next track.
5. SKIP ( ) button: Returns to the beginning of the
current track when pressed during playback. If
pressed again, your TWIN TRAY DVD RECORDER
moves to and plays the previous track.
If you press the this button within three seconds after
playback starts, the previous track will be played.
If you press the this button after three seconds, the
current track will be replayed from the beginning.
6. Press the SEARCH (
) buttons:
Fast Play (X2, X4, X8)
7. STOP ( ) button: Stops a track(song).
8. PLAY ( ) button: Plays a track(song) or pauses
playback.
9. ANYKEY button: The ANYKEY menu is displayed.
(Play Mode, Go To Playlist, New Playlist or Select
Tray).
62 - English
$
..
MARKER
MP3
Bryan Adams_2.mp3
MP3
Straight from the heart.mp3
MP3
Run to you.mp3
MP3
Heaven.mp3
MP3
This Love.mp3
%
1/3 Page
#
MOVE
SELECT
RETURN
EXIT
1. Current track (song): Displays the name of the
track being played.
2. Displays the current folder, play index and current
track size.
3. Displays available buttons.
4. This shows the operating state of a disc and a
playback time corresponding to a portion that is
currently played.
5. Displays the information for the folder and its tracks.
■
NOTE
■
If a disc contains only MP3 files or only
JPEG files, the MP3 or JPEG screen
appears after the disc is loaded.
If a disc contains a mix of MP3 and JPEG
files, you need to select Music for MP3
files or Photo for JPEG files.
00627D-DVD-TR520_XAA57-70
2005.7.26
9:31 AM
Page 63
Buttons on the Remote Control
used for MP3 playback
Repeat CD (CD-DA) & MP3
Using the REPEAT button.
1
Press the REPEAT button during playback.
Music List
CD
TRAY
R
TRACK 1
SELECT
P
√ 02 : 10
TRACK 1
TV
INPUT
CD-DA
01/15
04:57
CDDA
TRACK 2
CDDA
TRACK 3
CDDA
TRACK 4
CDDA
TRACK 5
CDDA
TRACK 6
CDDA
TRACK 7
1/3 Page
MOVE
5
4
6
7
2
SELECT
RETURN
EXIT
Press the REPEAT button repeatedly to select the repeat
mode you want.
8
1
Music List
2
3
2
CD
√ 02 : 10
TRACK 1
TRACK 1
CD-DA
01/15
04:57
CDDA
TRACK 2
CDDA
TRACK 3
CDDA
TRACK 4
CDDA
TRACK 5
CDDA
TRACK 6
CDDA
TRACK 7
1/3 Page
MOVE
DIRECT COPY
SELECT
RETURN
EXIT
MARKER
1. …†: Selects a track (song).
2. œ √ : Move the page up/down.
3. ENTER button: Plays the selected track (song).
4. SKIP ( ) button: Plays the next track.
5. SKIP ( ) button: Returns to the beginning of the
current track when pressed during playback. If
pressed again, your TWIN TRAY DVD RECORDER
moves to and plays the previous track.
If you press the this button within three seconds after
playback starts, the previous track will be played.
If you press the this button after three seconds, the
current track will be replayed from the beginning.
6. STOP ( ) button: Stops a track(song).
7. PLAY ( ) button: Plays a track(song) or pauses
playback.
8. ANYKEY button: The ANYKEY menu is displayed.
(Play Mode, Go To Playlist, New Playlist or Select
Tray).
•
•
•
•
Repeat Track (CD (CD-DA)/MP3)
Repeat Folder (MP3)
Repeat All (CD (CD-DA)/MP3)
Random (CD (CD-DA)/MP3): The random option
plays a disc’s track in random order.
• Normal (CD (CD-DA)/MP3): Track on a disc are
played in the order in which they were recorded on the
disc.
- To return to normal playback -
3
Press the REPEAT or CANCEL button repeatedly
to return to normal playback.
English - 63
Playback
1
00627D-DVD-TR520_XAA57-70
2005.7.26
9:31 AM
Page 64
New Playlist
Using the ANYKEY button.
1
Press the ANYKEY button during the Music List
playback.
You can register a maximum 28 tracks in the playlist.
1
Press the ANYKEY button during the Music List
playback.
Music List
CD
» 02 : 10
TRACK 1
Music List
TRACK 1
Play Mode
CD-DA
Go 01/15
To Playlist
New
Playlist
04:57
√
TRACK 2
CDDA
TRACK 3
CDDA
TRACK 2
CDDA
TRACK 4
CDDA
TRACK 3
CDDA
TRACK 5
CDDA
TRACK 4
CDDA
TRACK 6
CDDA
TRACK 5
CDDA
TRACK 6
CDDA
TRACK 7
CDDA
MOVE
TRACK 1
CD-DA
Go 01/15
To Playlist
New
Playlist
04:57
TRACK 7
1/3 Page
SELECT
√
Play Mode
RETURN
√
Selet Tray
EXIT
MOVE
2
» 02 : 10
TRACK 1
CDDA
√
Selet Tray
CD
Press the …† buttons to select Play Mode,
then press the ENTER or √ button.
2
1/3 Page
SELECT
RETURN
EXIT
Press the …† buttons to select New Playlist,
then press the ENTER or √ button.
Music List
CD
» 02 : 10
TRACK 1
TRACK 1
CDDA
TRACK 2
CDDA
TRACK 3
Make Playlist
CD
TRACK 4
Normal
TRACK 5
CDDA
Play Mode
Playback
CD-DA
√
CDDA
TRACK 1
CDDA
TRACK 2
Go 01/15
To Playlist
CDDA
Repeat
Track6
TRACK
CDDA
TRACK 3
New
Playlist
04:57
CDDA
Repeat
All
CDDA
TRACK 4
Random 1/3 Page
CDDA
TRACK 5
CDDA
TRACK 6
CDDA
TRACK 7
√
Selet Tray
MOVE
SELECT
RETURN
EXIT
1/3 Page
MOVE
3
Add
RETURN
EXIT
Press the …† buttons to select desired play mode,
then press the ENTER or √ button.
• Normal (CD (CD-DA)/MP3): Track on a disc are
played in the order in which they were recorded on the
disc.
•
Repeat Track (CD (CD-DA)/MP3)
•
Repeat Folder (MP3)
•
Repeat All (CD (CD-DA)/MP3)
•
Random (CD (CD-DA)/MP3): The random option
plays a disc’s track in random order.
3
Press the …† buttons to select tracks in order in
which you want them to play, then press the
ENTER button.
Make Playlist
CD
CDDA
TRACK 1
01.
TRACK 1
CDDA
TRACK 2
02.
TRACK 3
CDDA
TRACK 3
03.
TRACK 7
CDDA
TRACK 4
04.
TRACK 4
CDDA
TRACK 5
CDDA
TRACK 6
CDDA
TRACK 7
1/1 Page
1/3 Page
MOVE
64 - English
Add
RETURN
EXIT
00627D-DVD-TR520_XAA57-70
2005.7.26
9:31 AM
Page 65
Go To Playlist
4
To remove a track from the Playlist, press the
√…† buttons to select the wrong track, then
press the ENTER or CANCEL button.
The selected track will be removed.
1
Press the ANYKEY button during the Music List
playback.
Make Playlist
CD
Music List
CDDA
TRACK 1
01.
CDDA
TRACK 2
02.
TRACK 3
CDDA
TRACK 3
03.
TRACK 7
CDDA
TRACK 4
04.
TRACK 4
CDDA
TRACK 5
CDDA
TRACK 6
CDDA
TRACK 7
TRACK 1
TRACK 1
1/1 Page
EXIT
TRACK 2
CDDA
TRACK 3
CDDA
TRACK 4
CDDA
TRACK 5
CDDA
TRACK 6
New
Playlist
04:57
CDDA
TRACK 7
√
Selet Tray
MOVE
5
√
CDDA
Go 01/15
To Playlist
CD-DA
Delete
» 02 : 10
TRACK 1
Play Mode
1/3 Page
MOVE
CD
1/3 Page
SELECT
RETURN
EXIT
To store the playlist, press the ANYKEY button.
2
Press the …† buttons to select Go To Playlist,
then press the ENTER or √ button.
Make Playlist
CD
01.
TRACK 1
TRACK 2
02.
TRACK 3
CDDA
TRACK 3
03.
TRACK 7
CDDA
TRACK 4
CDDA
TRACK 5
CDDA
TRACK 6
CDDA
TRACK 1
CDDA
CDDA
Delete
TRACK
Playlist
CD
00 : 00
PLAYLIST
Playlist 1
Playlist 2
7
Go To Playlist
1/3 Page
SELECT
RETURN
PLAYLIST
-04:57
EXIT
1/1 Page
MOVE
6
Press the …† buttons to select the Go To
Playlist, then press the ENTER button.
A new Playlist will be created.
3
Playlist
CD
SELECT
RETURN
EXIT
Press the …† buttons to select the desired
playlist folder, then press the ENTER button.
The selected tracks are played automatically.
00 : 00
PLAYLIST
Playlist 1
Playlist 2
■
PLAYLIST
-04:57
NOTE
1/1 Page
MOVE
SELECT
RETURN
EXIT
After playback of selected playlist folder
has finished, next playlist folder is played
automatically.
English - 65
Playback
MOVE
1/1 Page
00627D-DVD-TR520_XAA57-70
2005.7.26
9:31 AM
Page 66
Delete the Playlist
1
Go To Edit Playlist
Press the ANYKEY button during the Music List
playback.
1
Press the ANYKEY button during the Music List
playback.
Music List
CD
» 02 : 10
TRACK 1
Music List
CD
TRACK 1
√
Play Mode
CDDA
TRACK 2
CDDA
TRACK 3
CDDA
TRACK 4
TRACK 1
CDDA
TRACK 2
CDDA
TRACK 3
CDDA
TRACK 4
CDDA
TRACK 5
CDDA
TRACK 5
Go 01/15
To Playlist
CDDA
TRACK 6
Play Mode
New
Playlist
04:57
CDDA
TRACK 7
Go 01/15
To Playlist
CDDA
TRACK 6
New
Playlist
04:57
CDDA
TRACK 7
CD-DA
√
Selet Tray
MOVE
CD-DA
1/3 Page
SELECT
RETURN
√
Selet Tray
EXIT
√
MOVE
2
» 02 : 10
TRACK 1
Press the …† buttons to select Go To Playlist,
then press the ENTER or √ button.
Playlist
CD
2
1/3 Page
SELECT
RETURN
EXIT
Press the …† buttons to select Go To Playlist,
then press the ENTER or √ button.
00 : 00
PLAYLIST
Playlist 1
Playlist
Playlist 2
CD
00 : 00
PLAYLIST
PLAYLIST
-04:57
Playlist 1
Playlist 2
1/1 Page
Playback
MOVE
SELECT
RETURN
PLAYLIST
-04:57
EXIT
1/1 Page
3
Press the …† buttons to select the Playlist you
want to delete, then press the ANYKEY button.
MOVE
SELECT
RETURN
EXIT
Playlist
CD
00 : 00
PLAYLIST
Playlist 1
3
Press the …† buttons to select the Playlist you
want to delete, then press the ANYKEY button.
Playlist 2
Delete Playlist
Playlist
PLAYLIST
01/02
00 : 00
Go To Edit Playlist
CD
TRACK 2
Go To Music List
00 : 00
PLAYLIST
New Playlist
1/1 Page
MOVE
SELECT
Playlist 1
RETURN
Playlist 2
EXIT
Delete Playlist
PLAYLIST
01/02
00 : 00
Go To Edit Playlist
Go To Music List
4
Press the …† buttons to select the Delete
Playlist, then press the ENTER or √ button.
Playlist
CD
00 : 00
PLAYLIST
Playlist 1
Playlist 2
Do you want to delete?
No
Yes
1/1 Page
MOVE
5
SELECT
RETURN
EXIT
Press the œ √ buttons to select Yes, then press the
ENTER button.
The selected Playlist is deleted.
66 - English
New Playlist
MOVE
1/1 Page
SELECT
RETURN
EXIT
00627D-DVD-TR520_XAA57-70
2005.7.26
9:31 AM
Page 67
Go To Music List
5
Press the …† buttons to select the Go To Edit
Playlist, then press the ENTER or √ button.
1
Edit Playlist
Press the ANYKEY button during the Playlist
playback.
CD
01.
TRACK 1
TRACK 2
02.
TRACK 3
CDDA
TRACK 3
03.
TRACK 7
CDDA
TRACK 4
04.
TRACK 4
CDDA
TRACK 5
CDDA
TRACK 6
CDDA
TRACK 7
CDDA
TRACK 1
CDDA
TRACK 1
1/1 Page
Add
RETURN
PLAYLIST
01/04
Go To Music List
04 : 30
EXIT
CDDA
TRACK 2
CDDA
TRACK 3
CDDA
TRACK 4
New Playlist
MOVE
6
7
Press the …† buttons to select tracks in the order
in which you want them to play, then press the
ENTER button.
To remove a track from the Playlist, press the
√ …† buttons to select the track, then press the
ENTER or CANCEL button.
To store the playlist, press the ANYKEY button.
2
1/1 Page
SELECT
RETURN
EXIT
Press the …† buttons to select Go To Music List,
then press the ENTER or √ button.
Music List
CD
√ 02 : 10
TRACK 1
TRACK 1
CD-DA
01/15
04:57
CDDA
TRACK 2
CDDA
TRACK 3
CDDA
TRACK 4
CDDA
TRACK 5
CDDA
TRACK 6
CDDA
TRACK 7
1/3 Page
MOVE
SELECT
RETURN
EXIT
Make Playlist
CD
CDDA
TRACK 1
01.
TRACK 1
CDDA
TRACK 2
02.
TRACK 3
CDDA
TRACK 3
03.
TRACK 7
CDDA
TRACK 4
CDDA
TRACK 5
CDDA
TRACK 6
CDDA
Delete
TRACK
7
Go To Playlist
1/3 Page
MOVE
9
1/1 Page
SELECT
RETURN
EXIT
Press the …† buttons to select the Go To
Playlist, then press the ENTER button.
Playlist will be edited.
English - 67
Playback
8
» 02 : 10
TRACK 1
Playlist 1
1/3 Page
MOVE
Playlist
CD
00627D-DVD-TR520_XAA57-70
2005.7.26
9:31 AM
Page 68
Select Tray
1
Playing a Picture
Press the ANYKEY button.
Music List
Bryan Adams.mp3 » 02 : 10
CD
..
Bryan Adams.mp3
Play Mode
ROOT
Go 01/15
To Playlist
New
4.0Playlist
MB
Selet Tray
√
MP3
Bryan Adams_2.mp3
MP3
Straight from the heart.mp3
MP3
Run to you.mp3
MP3
Heaven.mp3
MP3
This Love.mp3
√
MOVE
1/2 Page
SELECT
RETURN
EXIT
1
Insert a JPEG disc or Mixed disc (JPEG + MP3) into the
disc tray.
Title
CD
Press ENTER or Right button
for Title List.
Title
2
Press the …† buttons to select Select Tray then
press the ENTER or √ button.
Music
Photo
Timer Record
Setup
Music List
MOVE
SELECT
RETURN
EXIT
Bryan Adams.mp3 » 02 : 10
CD
..
Bryan Adams.mp3
Play Mode
Playback
ROOT
Go 01/15
To Playlist
New
4.0Playlist
MB
Selet Tray
MOVE
√
MP3
Bryan Adams_2.mp3
MP3
Straight from the heart.mp3
MP3
Run to you.mp3
MP3
Heaven.mp3
This Love.mp3
MP3
Recorder
Tray
√
Player Tray
1/3 Page
SELECT
RETURN
EXIT
2
Press the …† buttons to select Photo, then press the
ENTER or √ button.
Photo List
CD
3
Press the …† buttons to select Recorder Tray or
Player Tray then press the ENTER or √ button.
..
DSC01192
DSC01194
Index: 1/10
DSC01189
DSC01190
DSC01191
DSC01193
DSC01194
DSC01199
1/2 Page
MOVE
3
RETURN
EXIT
Press the …† œ √ buttons to select a picture.
• To see the next 8 pictures, press the SKIP(
button.
• To see the previous 8 pictures, press the
SKIP( ) button.
■
NOTE
■
■
68 - English
SELECT
)
This unit can play JPEG files in CD-R/RW
and DVD-R/-RW/-RAM.
If a disc contains only MP3 files or only
JPEG files, the MP3 or JPEG screen
appears after the disc is loaded.
If a disc contains a mix of MP3 and JPEG
files, you need to select Music for MP3
files or Photo for JPEG files.
00627D-DVD-TR520_XAA57-70
2005.7.26
9:31 AM
Page 69
Slide Show
Rotate
To set up, follow steps 1~3 in page 68.
4
To set up, follow steps 1~3 in page 68.
Press the ANYKEY button.
4
Press the ENTER button to select you want to
see the picture, then press the ANYKEY button.
Photo List
CD
DSC01194
..
DSC01189
√
Slide Show
DSC01192
DSC01193
√
Select Tray
Index: 1/10
DSC01190
DSC01191
DSC01194
DSC01199
Slideshow
√
Rotate
√
Zoom
1/2 Page
Go To Photo List
MOVE
5
SELECT
RETURN
EXIT
Press the …† buttons to select Slide Show,
then press the ENTER or √ button.
5
Press the …† buttons to select Rotate, then
press the ENTER or √ button.
Photo List
CD
DSC01194
..
DSC01189
DSC01192
Slideshow
√
Rotate
√
√
Normal
Zoom
Rotate 180
√
Go To Photo List
Rotate 270
1/2 Page
MOVE
6
DSC01191
Slow
DSC01193
Select Tray
DSC01190
DSC01194
Fast
SELECT
DSC01199
RETURN
EXIT
Press the …† buttons to select the slide show
speed, then press the ENTER or √ button.
The slide show starts.
- To stop the Slide Show -
1
Rotate 90
Playback
Slide Show
Index: 1/10
Press the ANYKEY button.
6
Press the …† buttons to select the rotate angle,
then press the ENTER or √ button.
- To stop the Rotate -
1
Press the ANYKEY button.
Rotate
√
Rotate Off
Rotate
Go To Photo List
√
Slideshow Off
Go To Photo List
2
2
Press the …† buttons to select Rotate Off, then
press the ENTER or √ button.
Press the …† buttons to select Slideshow Off,
then press the ENTER or √ button.
English - 69
00627D-DVD-TR520_XAA57-70
2005.7.26
9:31 AM
Page 70
Zoom
Go To Photo List
To set up, follow steps 1~3 in page 68.
4
Press the ENTER button to select you want to
see the picture, then press the ANYKEY button.
Slideshow
√
Rotate
√
To set up, follow steps 1~3 in page 68.
4
Zoom
Press the ENTER button to select you want to see
the picture, then press the ANYKEY button.
Slideshow
√
Rotate
√
Zoom
Go To Photo List
Go To Photolist
5
Press the …† buttons to select Zoom, then
press the ENTER or √ button.
5
Press the …† buttons to select Go To Photo
List, then press the ENTER or √ button.
Photo List
Playback
CD
DSC01194
Index: 1/10
..
DSC01189
DSC01190
DSC01191
DSC01192
DSC01193
DSC01194
DSC01199
1/2 Page
MOVE
6
Each time the ENTER button is pressed, the
picture is enlarged up to x4(four times the
normal size).
➞ X2 ➞ X4 ➞ X2 ➞ Normal
- To stop the Zoom -
1
Press the ANYKEY button.
Zoom Off
Go To Photo List
2
Press the …† buttons to select Zoom Off, then
press the ENTER or √ button.
70 - English
SELECT
RETURN
EXIT
00627D-DVD-TR520_XAA_71-80
2005.7.26
9:35 AM
Recording
Page 71
Before Recording
This unit can record on various types of discs. Before
recording, read the following instructions and select the
disc type according to your preference.
Recordable Discs
This section shows various DVD Recording
methods.
This TWIN TRAY DVD RECORDER can record on the
following discs.
DVD-RAM
DVD-RW
DVD-R
•DVD-RWs and DVD-RAMs are rewritable.
•DVD-Rs are non-rewritable
Compatibility between Samsung and Other Company’s
Recorder
Disc Types
DVD-RAM
DVD-RW
Before Recording . . . . . . . . . . . . . . . . . . . . . . . . .71
DVD-R
Recording the current TV
program you are watching . . . . . . . . . . . . . . . . . . .73
■
Recording from external equipment
you are watching . . . . . . . . . . . . . . . . . . . . . . . . . .74
NOTE
■
Copying from a Camcorder . . . . . . . . . . . . . . . . . .75
Making an One Touch Recording (OTR) . . . . . . . .76
Making a Timer Recording . . . . . . . . . . . . . . . . . .77
Flexible Recording (for Timer recording only) . . . .79
Editing the Timer Record List . . . . . . . . . . . . . . . .79
Deleting a Timer Record List . . . . . . . . . . . . . . . . .80
Finalize
- This closes the DVD-RW/-R so no
additional recording can be done.
Unfinalize
- This allows additional recording on a
DVD-RW disc originally recorded on the
TWIN TRAY DVD RECORDER.
- A DVD-RW disc that has been recorded
by DAO(Disc At Once) in a PC cannot be
unfinalized.
- A DVD-RW disc that has been recorded
in Video Mode of a different maker’s
recorder cannot be unfinalized.
- A DVD-R disc cannot be unfinalized.
English - 71
Recording
Recording Recording Device Finalizing Additional Recording
format
in Samsung Recorder
Samsung
X
Recordable
VR Mode
X
Recordable
Other Company
Not recordable
finalized
Samsung
Recordable
not finalized
VR Mode
Not recordable
finalized
Other Company
Recordable
not finalized
finalized
Not
recordable
Samsung
not
finalized
Recordable
V Mode
Not recordable
finalized
Other Company
not finalized Not recordable
finalized
Not recordable
Samsung
not finalized
Recordable
V Mode
Not recordable
finalized
Other Company
not finalized Not recordable
00627D-DVD-TR520_XAA_71-80
2005.7.26
9:35 AM
Page 72
Recording Formats
When you insert a new, unused disc, the following
message appears. Since available functions differ
depending on the disc type, select a disc that best fits
your preferences.
DVD-RAM: Use after formatting the disc.
Unformatted Disc
Do you want to format this disc?
Yes
Recording Mode
Select one of four recording modes by pressing the
REC MODE button repeatedly while the unit is in Stop
mode for the desired recording time and picture quality.
In general, picture quality improves as the recording time
decreases. In FR mode, the most suitable record mode
is adjusted automatically, according to remaining time on
the disc and length of the timer recording. This function is
selected only one mode in XP, SP, LP and EP modes
and you can use this mode for timer recording.
Characteristic
XP
(high quality mode)
Select when the
video quality is
important.
SP
(standard quality mode)
Select to record in
standard quality.
Approx. 2 hours
about 4.5 Mbps
LP
(long recording mode)
Select when a long
recording time is
required.
Approx. 4 hours
EP
(extended mode)
Select when a longer
recording time is
required.
No
DVD-RW: When a new, unused DVD-RW disc is first
inserted, the message “Uninitialized Disc Do
you want to initialize this disc?” will be
displayed. If you select Yes, the disc will be
initially formatted in VR mode.
If you want to change the mode later, refer to
Formatting a Disc on page 105.
Recording Times
DVD-RAM/-RW/-R
Approx. 1 hour
Recording Mode
FR
For timer recording only
(Flexible Recording)
See page 79.
about 8.5 Mbps
about 2 Mbps
Approx. 6 hours/
about 1.6 Mbps
Approx. 8 hours/
about 1.2 Mbps
Approx 1~6 hours
Uninitialized Disc
Do you want to initialize this disc?
Yes
No
■
Recording
NOTE
DVD-R: Formatting DVD is unnecessary and only Video
Mode Recording is supported.
DVD-RW(V mode)/-R
• Chapters will be created automatically when you finalize
recording on DVD-RW/-R discs in Video mode.
The chapter’s length (interval between chapters) varies
according to the recording mode.
• Simple editing (erasing titles/changing title name)
DVD-RAM/-RW(VR mode)
• This mode allows multiple editing functions (such as
deletion of the whole title, partial deletion of a title, etc.)
• Various editing options using a created Playlist.
72 - English
Recording time may vary according to
specific conditions.
00627D-DVD-TR520_XAA_71-80
2005.7.26
9:35 AM
Page 73
Unrecordable video
Video with copy protection cannot be recorded on this
TWIN TRAY DVD RECORDER.
When the TWIN TRAY DVD RECORDER receives a copy
guard signal while recording, recording stops and the
following message appears on the screen.
Recording the current TV
program you are watching
Check that the disc has enough available space for the
recording. Adjust the recording mode.
You cannot record copy protected movie.
Concerning Copy Control Signals
Press the RECORDER button on the front panel or R
button on the remote control. Press the OPEN/CLOSE
button and place a recordable disc on the disc tray.
Press the OPEN/CLOSE button to close the disc tray.
Wait until LOAD disappears from the front panel display.
TV broadcasts that contain copy control signals may have one
of the following three signal types, Copy-Free, Copy-Once and
Copy-Never. If you want to record a copy-once type program,
use DVD-RW with CPRM in VR Mode and DVD-RAM.
If an unused DVD-RAM disc is used, you will be
prompted to format first. Make your selection using the
œ √ buttons, then press ENTER button. (See page 72)
1
Signal type
Media
DVD-RW(Ver.1.1)
Copy-Free
Copy-Once
Copy-Never
O
-
-
DVD-RW(Ver.1.1)
Unformatted Disc
Do you want to format this disc?
with CPRM
Yes
VR mode
O
V mode
O
DVD-R
O
DVD-RAM(Ver.2.0)
O
O*
No
-
O*
This * marked parts are compatible with CPRM.
Once “Copy Once” has been recorded, recording
cannot be done anymore.
- Content Protection for Recordable Media (CPRM)
CPRM is a mechanism that ties a recording to the media on
which it is recorded. It is supported by some DVD
RECORDERs, but not by many DVD players. Each blank
recordable DVD has a unique 64-bit media ID etched in the
BCA. When protected content is recorded onto the disc, it can
be encrypted with a 56-bit C2 (Cryptomeria) cipher derived
from the media ID.
During playback, the ID is read from the BCA and used to
generate a key to decrypt the contents of the disc. If the
contents of the disc are copied to other media, the ID will be
absent or wrong and the data will not be decryptable.
Uninitialized Disc
Do you want to initialize this disc?
Yes
2
No
Press the CH (
) or number buttons to select
the current program you want to record.
English - 73
Recording
If an unused DVD-RW disc is used, whether to initialize
or not will be asked first. Make your selection, using
the œ √ buttons, then press the ENTER button.(See
page 72)
-
00627D-DVD-TR520_XAA_71-80
3
2005.7.26
9:35 AM
Page 74
Press the REC MODE button repeatedly, (or press the
REC MODE button and then press the …† buttons) to
select the recording speed (quality).
➞ SP ➞ LP ➞ EP ➞ XP
■
You cannot change the recording mode
and the channel while recording.
■
Recording will stop automatically if there is
no free space left for recording.
■
Up to 99 titles can be recorded onto a
disc.(DVD-RAM/-RW/-R)
■
Recording will stop automatically if a copy
protected image is selected.
■
DVD-RAM/-RW discs must be formatted
before starting to record. Most new discs
are sold unformatted.
■
Do not use DVD-R authoring discs with
this TWIN TRAY DVD RECORDER.
NOTE
Record Mode SP 031:39
4
Press the REC button.
Information concerning the channel is displayed
on the screen, then recording begins.
Icon( ) is displayed on the front panel.
● Recording : CH 11 [Mono]
Recording from external
equipment you are watching
Before you start
Recording
Check that the disc has enough available space for the
recording. Adjust the recording mode.
- To pause recording • Press the REC PAUSE button to pause a recording
in progress.
1
Press the RECORDER button on the front panel or R
button on the remote control. Press the OPEN/CLOSE
button and place a recordable disc on the disc tray.
Press the OPEN/CLOSE button to close the disc tray.
Wait until LOAD disappears from the front panel display.
If an unused DVD-RAM disc is used, whether to format
or not will be asked first. (See page 72)
If an unused DVD-RW disc is used, whether to initialize
or not will be asked first. (See page 72)
2
Press the INPUT button to select the input source
according to the connection you made.
The front panel display changes in the following
sequence:
➞ CH Number ➞ AV 1 ➞ AV 2 ➞ DV
• Press the REC PAUSE button again during pause to
resume recording.
• You can switch channels by pressing the
CH (
) buttons while recording pauses.
- To stop recording Press the STOP ( ) button to stop or finish a
recording in progress.
• When using DVD-RAM/-RW/-R discs, the message
“Updating the information of disc. Please wait for a
moment” is displayed.
If you connect a digital camcorder, press the INPUT
button to select DV. (See pages 75~76)
74 - English
00627D-DVD-TR520_XAA_71-80
3
2005.7.26
9:35 AM
Page 75
Press the REC MODE button repeatedly, (or press
the REC MODE button, then press the …† buttons)
to select the recording speed (quality).
➞ SP ➞ LP ➞ EP ➞ XP
Record Mode SP 031:39
4
Press the REC button.
Information concerning the external input mode is
displayed on the screen, then recording begins.
Icon(
Copying from a Camcorder
You may control the Camcorder using the IEEE1394 (DV)
interface.
1
Connect the DV output jack of your camcorder to the
DV input jack on the front of your TWIN TRAY DVD
RECORDER using a DV cable.
2
Press the RECORDER button on the front panel or R
button on the remote control. Press the OPEN/CLOSE
button and place a recordable disc on the disc tray.
Press the OPEN/CLOSE button to close the disc tray.
Wait until LOAD disappears from the front panel display.
3
Press the REC MODE button repeatedly to select
the recording speed(quality).
) is displayed on the front panel.
- To pause recording • Press the REC PAUSE button to pause a recording
in progress.
• Press the REC PAUSE button again during pause to
resume recording.
• You can switch channels by pressing the
CH (
) buttons while recording pauses.
➞ SP ➞ LP ➞ EP ➞ XP
Press the STOP ( ) button to stop or finish a
recording in progress.
• When using DVD-RAM/-RW/-R discs, the
message “Updating the information of disc.
Please wait for a moment” is displayed.
Recording
- To stop recording Record Mode SP 031:39
English - 75
00627D-DVD-TR520_XAA_71-80
4
2005.7.26
9:35 AM
Press the INPUT button to select DV.
If the input is set to DV, a playback/record menu that
enables camcorder control appears on the top of the
screen.
Page 76
Making a One Touch
Recording (OTR)
DV
The DV device is connected.
MOVE
5
6
SELECT
You can set the TWIN TRAY DVD RECORDER to record
in 30-minute increments up to 8 hours by pressing the REC
button.
RETURN
Select the Play (√) icon on the upper part of the
screen to playback the camcorder and find the
starting position to copy.
You can press the PLAY ( ) button of the remote
control to play the camcorder.
To start recording, use the œ √ buttons to select
Record ( ● ) icon in the top side of the screen, then
press the ENTER button.
You can press the REC button of the remote control
to start recording. To display playback related icons
on the screen, press any direction button on the
remote control.
1
Press the RECORDER button on the front panel or R
button on the remote control. Press the OPEN/CLOSE
button and place a recordable disc on the disc tray.
Press the OPEN/CLOSE button to close the disc tray.
Wait until LOAD disappears from the front panel display.
2
If you want to record a TV channel, press the
CH (
) buttons or number buttons to select a
desired channel. If you want to record through a
connected external equipment, press the INPUT
button to select an appropriate external input (AV 1,
AV 2, DV or CH 01).
3
Press the REC button to start recording.
Recording
- To stop recording -
● Recording : CH 11 [Mono]
Press the STOP ( ) button to stop or finish a
recording in progress.
• When using DVD-RAM/-RW/-R discs, the
message “Updating the information of disc.
Please wait for a moment” is displayed
4
Press the REC button repeatedly to adjust the
desired recording time.
➞ 0:30 ➞ 1:00 ➞ ... 8:00 ➞ Off
OTR Mode
76 - English
0:30
00627D-DVD-TR520_XAA_71-80
■
NOTE
2005.7.27
1:15 AM
Page 77
The timer counter decreases by the
minute from 8:00 to 0:00, then the TWIN
TRAY DVD RECORDER stops recording.
Making a Timer
Recording
- To stop recording Press the STOP ( ) button. The message “Do you
want to stop recording?” is displayed.
• Press the œ √ buttons to select Yes, then press the
ENTER button, or press the STOP ( ) button again.
1. Check the antenna cable is connected.
2. Check the remaining time of the disc.
3. Check the date and time are correct.
Make sure the Clock (Setup-Clock Set) is set before
you proceed with a timer recording. (See pages 26~28)
About INFO button
During recording, press the INFO button once, Disc
information screen appears.: Displays Total numbers of
Titles and Playlists, Recordable Time, Available
Space(Music/Photo).
DVD-RAM(VR)
Disc Name
Total Title
Total Playlist
Recordable Time
Protection
JAN/01/2005 (SAT)
Disc Info
MY VIED
25
2
17:12 XP
Not Protected
AM 12:00
Using the TIMER button
1
Press the RECORDER button on the front panel or R
button on the remote control.
With the unit in Stop mode/Playback mode,
press the TIMER button.
The Timer Record List screen is displayed.
Timer Rec.List
Current Time 11:00 AM
DVD-RAM(VR)
No.
Source
Date
Start
End
Mode
Add a list
Available Time
DVD
MOVE
29:10 SP
SELECT
RETURN
EXIT
Using the MENU button.
DVD-RAM(VR)
Name
Recording Info
JAN/01/2005 12:00 AM
CH 11
Recording Title
4
Created Time
JAN/01/2005 12:00 AM
Recording Time
00:13:27
JAN/01/2005 (SAT)
AM 12:00
• With the unit in Stop mode/Playback mode, press
the MENU button.
• Press the …† buttons to select Timer Record,
then press the ENTER or √ button.
2
Press the ENTER button to select Add a list.
The Timer Record List screen is displayed.
Timer Rec.List
Current Time 11:00 AM
DVD-RAM(VR)
No. Source
Title No. 01
Start
End
Mode
Source
Date
Date
Add a list
Start
End
Mode
AV2
01 JAN
11 : 00 AM
02 : 00 PM
SP
Save
Available Time
Available Time
DVD
29:10 SP
DVD
29:10 SP
MOVE
SELECT
RETURN
EXIT
English - 77
Recording
Press the INFO button twice: Current recording
information screen appears and displays recording Name,
Title, Created Time and Recording Time information.
00627D-DVD-TR520_XAA_71-80
2005.7.26
9:35 AM
Page 78
Using the ANYKEY button.
• Press the ANYKEY button.
• Press the …† buttons to select Add, then press
the ENTER or √ button.
3
4
Set timer recording option.
• Fill the input items using the …†œ √ buttons and
number buttons.
• Source : The video input source (AV1, AV2), or the
broadcasting channel you want to make a timer
recording from.
• Date : Timer Recording allows setting the
recording time within one month period. Set the
recording day. (day/month)
30 JAN
31 JAN
To exit without saving the current setting
Press the MENU button.
To return to the previous menu
Press the RETURN button if you don’t want to set a
timer recording.
Every Day
MON-SAT
MON-FRI
Every SAT
Every SUN
button again.
•
will appear on the front panel. It means that a
timer recording is registered.
If the timer settings overlap;
The programs are recorded in order of priority.
If timer recording is set for the first program and
then again for the second program and both
programs overlap, the following message will
appear on the screen: “This setting is identical with
1.” The message shows that the first program
has priority. After recording of the first program is
complete, the second program starts being
recorded.
œ √ : Moves to the previous/next item.
…† 0~9 : Sets a value.
01 JAN
02 JAN
03 JAN
After selecting the set up value for each mode, press the
ENTER button to select Save, and press the ENTER
5
• Start/End Time : Start and end time of the timer
recording.
Recording
• Mode (Recording Mode) :
- FR (Flexible Recording) : Select when you want to
set video quality automatically. In FR mode, the
most suitable record mode is adjusted automatically,
according to remaining time on the disc and length
of the timer recording.
- XP (high quality) : Select when video quality is
important.
- SP (standard quality) : Select to record in standard
quality.
- LP (low quality) : Select when a long recording time
is required.
- EP (extended) : Select when a longer recording time
is required.
■
NOTE
When you are recording at EP mode on a
DVD-RW(V mode)/-R disc, it may not
record the full 6 or 8 hours because the
unit uses the VBR(Variable Bit Rate)
ENCODING system. For example, if you
record a program with a lot of action, it
uses a higher bit rate which in turn
consumes more disc memory.
78 - English
Press the MENU button to finish the Timer Recording
setting.
■
The timer recording time may differ from
the set time depending on disc status and
overall timer recording status (for example,
recording times overlapping, or when the
previous recording ends within 2 minutes
before the start time of the next recording.)
■
You can set up to 12 Timer Recordings.
NOTE
00627D-DVD-TR520_XAA_71-80
2005.7.26
9:35 AM
Page 79
Flexible Recording
(for Timer recording only)
2
Press the …† buttons to select the number of the
Timer Record List you want to edit, then press the
ANYKEY button.
• The Add, Edit and Delete items are displayed.
Timer Rec.List
Current Time 11:00 AM
DVD-RAM(VR)
In FR mode, the most suitable record mode is adjusted
automatically, according to remaining time on the disc
and length of the timer recording.
No.
Source
Date
01
02
03
CH 04
AV 2
CH 04
01 JAN
15 JAN
01 JAN
Add
Start
End
11 : 00 AM
11: 10 AM
15 : 10 AM
Add a list
Mode
02 : 00PM
01 : 30PM
02 : 30PM
SP
SP
SP
Edit
DeleteTime
Available
The FR mode recording setup is the same as Timer
Recording. When setting the mode in step 4, set the FR
mode.
DVD
29:10 SP
MOVE
3
Editing the Timer
Record List
SELECT
RETURN
EXIT
Press the …† buttons to select Edit, then press the
ENTER or √ button.
• The Timer Record Input item is displayed.
Edit the items you want to modify. See the “Making a
Timer Recording” section for more information on
Timer Recording Input items.(See pages 77~78)
Timer Rec.List
Current Time 11:00 AM
DVD-RAM(VR)
No. Source
Title No. 02
Follow these directions to edit the timer record list.
Start
End
Mode
Source
Date
Date
Add a list
Start
End
Mode
AV2
01 JAN
11 : 00 AM
02 : 00 PM
SP
Save
Available Time
Available Time
DVD
DVD
MOVE
29:10 SP
29:10 SP
SELECT
RETURN
EXIT
1
Press the RECORDER button on the front panel or R
button on the remote control.
With the unit in Stop mode/Playback mode, press
the TIMER button.
The Timer Record List screen is displayed.
4
Press the ENTER button to select Save, then press
the ENTER button to confirm the edited setting.
5
Press the MENU button after finishing the operation.
The Timer Record List screen will disappear.
Timer Rec.List
Current Time 11:00 AM
DVD-RAM(VR)
No.
Source
Date
01
02
03
CH 04
AV 2
CH 04
01 JAN
15 JAN
01 JAN
Available Time
DVD
MOVE
Start
11 : 00 AM
11: 10 AM
15 : 10 AM
Add a list
End
02 : 00PM
01 : 30PM
02 : 30PM
Mode
SP
SP
SP
29:10 SP
SELECT
RETURN
EXIT
Using the MENU button.
• With the unit in Stop mode/Playback mode, press
the MENU button.
• Press the …† buttons to select Timer Record,
then press the ENTER or √ button.
English - 79
Recording
Using the TIMER button
00627D-DVD-TR520_XAA_71-80
2005.7.26
9:35 AM
Deleting a Timer
Record List
Page 80
3
Press the …† buttons to select Delete, then press
the ENTER or √ button.
• You will be prompted with the delete confirm
message such as “Do you want to delete No.02?”.
Timer Rec.List
Follow these directions to delete an entry from the timer
record list.
Current Time 11:00 AM
DVD-RAM(VR)
No.
01
02
03
Source
HDD
HDD
HDD
Date
Available Time
DVD
MOVE
Using the TIMER button
1
Press the RECORDER button on the front panel or R
button on the remote control.
With the unit in Stop mode/Playback mode, press
the TIMER button. The Timer Record List screen is
displayed.
4
No.
Source
Date
01
02
03
CH 04
AV 2
CH 04
01 JAN
15 JAN
01 JAN
DVD
MOVE
Start
11 : 00 AM
11: 10 AM
15 : 10 AM
Add a list
End
02 : 00PM
01 : 30PM
02 : 30PM
Recording
RETURN
EXIT
Timer Rec.List
Current Time 11:00 AM
DVD-RAM(VR)
No.
Source
Date
01
02
CH 04
AV 2
01 JAN
15 JAN
Start
11 : 00 AM
11: 10 AM
Add a list
End
02 : 00PM
01 : 30PM
Mode
SP
SP
Mode
SP
SP
SP
RETURN
EXIT
• With the unit in Stop mode/Playback mode, press
the MENU button.
• Press the …† buttons to select Timer Record,
then press the ENTER or √ button.
Press the …† buttons to select the number of the
Timer Record List you want to delete, and then
press the ANYKEY button.
• The Add, Edit and Delete items are displayed.
Timer Rec.List
Current Time 11:00 AM
No.
Source
Date
01
02
03
CH 04
AV 2
CH 04
01 JAN
15 JAN
01 JAN
Add
Start
11 : 00 AM
11: 10 AM
15 : 10 AM
Add a list
End
02 : 00PM
01 : 30PM
02 : 30PM
Mode
SP
SP
SP
Edit
DVD
MOVE
29:10 SP
SELECT
RETURN
EXIT
29:10 SP
SELECT
DVD-RAM(VR)
DVD
MOVE
Using the MENU button.
80 - English
SP
SP
SP
Press the œ √ buttons to select Yes, then press the
ENTER button.
• The selected entry will be deleted from the list.
Available Time
DeleteTime
Available
Mode
29:10 SP
SELECT
Timer Rec.List
2
End
Current Time 11:00 AM
DVD-RAM(VR)
Available Time
Start
CH 07
01 JAN
11 : 00 AM 02 : 00PM
CH 11
15 to
JANdelete11:No.02?
10 AM 01 : 30PM
Do
you want
AV 2
01 JAN
15 : 10 AM 02 : 30PM
Yes Add a list No
29:10 SP
SELECT
RETURN
EXIT
5
Press the MENU button after finishing the operation.
The Timer Record List screen will disappear.
00627D-DVD-TR520_XAA_81-86
2005.7.26
9:38 AM
Page 81
Editing
This section introduces basic functions of
editing and explains both edit functions for the
recording on a disc and edit functions for the
entire disc.
• Title List
A title is a section of recorded video and audio.
Title List shows a list to help you select a title.
Since the title consists of the information on stream that
is actually recorded, if one title is deleted, that title
cannot be played again.
This refers to a unit of playback, which is made by
selecting a desired scene in the entire Title List.
When one playlist is played, only the scene selected by
the user will play and then stop. Since only the
information necessary for playing a desired scene is
included in a playlist, even if that playlist is deleted, the
original stream will not be deleted.
Basic Editing (Title List) . . . . . . . . . . . . . . . . . . . . .82
Advanced Editing (Playlist) . . . . . . . . . . . . . . . . . .87
Title Copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Recording or editing might not be completed if an
error, such as a sudden power failure occurs.
Please be aware that a title that has been damaged
cannot be retrieved.
Copying Multiple Titles at One Time . . . . . . . . . . .99
Disc Copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
■
Disc Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . .103
NOTE
Edit functions of Title List and Play List are
available only in the R Tray.
English - 81
Editing
• Play List
00627D-DVD-TR520_XAA_81-86
2005.7.26
9:38 AM
Page 82
Basic Editing (Title List)
4
Press the …† buttons to select Rename, then press
the ENTER or √ button.
The Rename screen is displayed.
Rename
DVD-RAM(VR)
Renaming(Labeling) a Title
JAN / 1 8 / 2005 12:15 AM CH 11
Follow these instructions to rename a title list entry,
i.e., to edit the name of a recorded program.
Back Space
MOVE
Using the TITLE LIST button
1
5
Space Delete
SELECT
Clear
RETURN
Save
EXIT
Select the desired characters using the …† œ √
buttons, press the ENTER button to select the
character.
Press the RECORDER button on the front panel or R
button on the remote control.
Rename
DVD-RAM(VR)
Sports(A1)
2
With the unit in Stop mode/Playback mode, press the
TITLE LIST button.
The Title List screen is displayed.
Back Space
MOVE
Space Delete
SELECT
Clear
RETURN
Save
EXIT
Title List
DVD-RAM(VR)
No.
01
02
03
04
Title
Length
JAN/18/2005 12:15A
JAN/19/2005 12:15A
JAN/20/2005 12:15A
JAN/25/2005 12:15A
00:10:21
00:40:03
00:20:15
00:50:16
• Back Space: Deletes and moves the cursor
backwards by one position.
• Space: Enters a blank and moves the cursor one
forward (to the right).
• Delete: Deletes the character at the cursor position.
• Clear: Deletes all the character inputs.
• Save: Registers the character inputs.
JAN/18/2005 12:15 AM CH11
JAN/18/2005 12:15 AM
SP
1/1 Page
MOVE
SELECT
RETURN
EXIT
Using the MENU button.
Editing
• With the unit in Stop mode/Playback mode, press
the MENU button.
• Press the …† buttons to select Title,
then press the ENTER or √ button.
3
6
Press the …† œ √ buttons to select Save, and then
press the ENTER button.
The changed title name is displayed.
Title List
Press the …† buttons to select an entry you want to
rename from the Title List, then press the ANYKEY
button.
DVD-RAM(VR)
01
02
03
04
No.
Rename
01
02
03
04
Protection
Delete
Partial Delete
SP
Title
JAN/18/2005 12:15A
JAN/19/2005 12:15A
JAN/20/2005 12:15A
JAN/25/2005 12:15A
√
Playlist
JAN/18/2005 12:15 AM CH11
√
Navigation
JAN/18/2005 12:15 AM
√
Select Tray
1/1 Page
Disc Manager
MOVE
82 - English
SELECT
RETURN
EXIT
Sports(A1)
JAN/19/2005 12:15A
JAN/20/2005 12:15A
JAN/25/2005 12:15A
Length
00:10:21
00:40:03
00:20:15
00:50:16
JAN/18/2005 12:15 AM
Length
00:10:21
00:40:03
00:20:15
00:50:16
Title
Sports(A1)
Title List
DVD-RAM(VR)
No.
SP
1/1 Page
MOVE
SELECT
RETURN
EXIT
00627D-DVD-TR520_XAA_81-86
2005.7.26
9:38 AM
Page 83
Locking (Protecting) a Title
Follow these instructions to lock a Title to protect it from
accidental deletion.
4
Press the …† buttons to select Protection, then press
the ENTER or √ button.
Title List
DVD-RAM(VR)
Title Protection:
Using the TITLE LIST button
JAN/18/2005 12:15 AM CH11
On
Off
JAN/18/2005 12:15 AM
SP
MOVE
1
2
SELECT
RETURN
EXIT
Press the RECORDER button on the front panel or R
button on the remote control.
With the unit in Stop mode/Playback mode, press the
TITLE LIST button .
The Title List screen is displayed.
5
Press the œ √ buttons to select On, then press the
ENTER button. The key icon on the information
window for the selected entry changes to the locked
status. ( ➝ )
Title List
DVD-RAM(VR)
No.
01
02
03
04
Title
Title List
Length
JAN/18/2005 12:15A
JAN/19/2005 12:15A
JAN/20/2005 12:15A
JAN/25/2005 12:15A
DVD-RAM(VR)
00:10:21
00:40:03
00:20:15
00:50:16
01
02
03
04
JAN/18/2005 12:15 AM CH11
Title
JAN/18/2005 12:15A
JAN/19/2005 12:15A
JAN/20/2005 12:15A
JAN/25/2005 12:15A
Length
00:10:21
00:40:03
00:20:15
00:50:16
JAN/18/2005 12:15 AM CH11
JAN/18/2005 12:15 AM
JAN/18/2005 12:15 AM
SP
1/1 Page
MOVE
No.
SELECT
SP
RETURN
EXIT
1/1 Page
MOVE
SELECT
RETURN
EXIT
Using the MENU button.
• With the unit in Stop mode/Playback mode, press
the MENU button.
• Press the …† buttons to select Title, then
press the ENTER or √ button.
Follow these instructions to delete a title from the
Title List.
Press the …† buttons to select a Title you want to
protect from the Title List, then press the ANYKEY
button.
Using the TITLE LIST button
Title List
DVD-RAM(VR)
No.
Rename
01
02
03
04
Protection
Delete
Partial Delete
SP
Title
JAN/18/2005 12:15A
JAN/19/2005 12:15A
JAN/20/2005 12:15A
JAN/25/2005 12:15A
Length
00:10:21
00:40:03
00:20:15
00:50:16
1
Press the RECORDER button on the front panel or R
button on the remote control.
√
Playlist
JAN/18/2005 12:15 AM CH11
√
Navigation
JAN/18/2005 12:15 AM
√
Select Tray
1/1 Page
Disc Manager
MOVE
SELECT
RETURN
EXIT
English - 83
Editing
3
Deleting a Title
00627D-DVD-TR520_XAA_81-86
2
2005.7.26
9:38 AM
Page 84
With the unit in Stop mode/Playback mode, press the
TITLE LIST button.
The Title List screen is displayed.
5
Press the œ √ buttons to select Yes, then press the
ENTER button.
Title List
DVD-RAM(VR)
Title List
No.
DVD-RAM(VR)
01
02
03
04
Title
Length
JAN/18/2005 12:15A
JAN/19/2005 12:15A
JAN/20/2005 12:15A
JAN/25/2005 12:15A
Deleting...
(Please wait)
00:10:21
00:40:03
00:20:15
00:50:16
JAN/18/2005 12:15 AM CH11
JAN/18/2005 12:15 AM
JAN/18/2005 12:15 AM CH11
SP
JAN/18/2005 12:15 AM
SP
1/1 Page
MOVE
SELECT
RETURN
EXIT
Title List
Using the MENU button.
DVD-RAM(VR)
• With the unit in Stop mode/Playback mode, press
the MENU button.
• Press the …† buttons to select Title,
No.
01
02
03
Title
JAN/18/2005 12:15 AM CH11
then press the ENTER or √ button.
JAN/18/2005 12:15 AM
SP
1/1 Page
MOVE
3
Length
JAN/19/2005 12:15A 00:40:03
JAN/20/2005 12:15A 00:20:15
JAN/25/2005 12:15A 00:50:16
SELECT
RETURN
EXIT
Press the …† buttons to select a title that you want to
delete in the Title List, then press the ANYKEY button.
Title List
DVD-RAM(VR)
No.
Rename
01
02
03
04
Protection
Delete
Partial Delete
Title
Length
JAN/18/2005 12:15A
JAN/19/2005 12:15A
JAN/20/2005 12:15A
JAN/25/2005 12:15A
00:10:21
00:40:03
00:20:15
00:50:16
√
Playlist
JAN/18/2005 12:15 AM CH11
√
Navigation
JAN/18/2005 12:15 AM
SP
Select Tray
√
4
SELECT
RETURN
Title List
Editing
DVD-RAM(VR)
Do you want to delete?
(Related playlists
may be deleted.)
Yes
No
JAN/18/2005 12:15 AM
SP
MOVE
SELECT
RETURN
EXIT
• The message may be different depending on the
type of disc that you are using. You will be prompted
with the confirmation message. DVD-RAM(VR
mode), DVD-RW(VR mode): Since Playlist is
present, the message “Do you want to delete?
(Related playlists may be deleted.)” is displayed.
DVD-RW(Video mode)/-R: Since Playlist is not
present, the message “Do you want to delete?” is
displayed.
84 - English
■
When the Cartridge Protection or Disc
Protection has been set to Protected, you
cannot delete titles. (See page 6 and 105)
■
Once an entry is deleted from the Title List
it cannot be recovered.
■
Once DVD-RW/-R is finalized, it cannot be
deleted.
EXIT
Press the …† buttons to select Delete, then press the
ENTER or √ button.
JAN/18/2005 12:15 AM CH11
You cannot delete a protected entry. If you
want to delete a protected entry, select
“Off” in the Title Protection menu. (See
page 83)
1/1 Page
Disc Manager
MOVE
■
NOTE
00627D-DVD-TR520_XAA_81-86
2005.7.26
9:38 AM
Page 85
Deleting a Section of a Title (Partial
Delete)
3
Press the …† buttons to select an entry you want to
edit from the Title List, then press the ANYKEY button.
Follow these instructions to edit or delete a section
of a Title List entry.
Title List
DVD-RAM(VR)
No.
Rename
01
02
03
04
Protection
Delete
(VR mode)
Partlal Delete
Title
√
Select Tray
1/3 Page
Disc Manager
Using the TITLE LIST button
1
00:10:21
00:40:03
00:20:15
00:50:16
√
Playlist
JAN/18/2005 12:15 AM CH11
Navigation
JAN/18/2005 12:15 AM √
SP
Press the RECORDER button on the front panel or R
button on the remote control.
Length
JAN/18/2005 12:15A
JAN/19/2005 12:15A
JAN/20/2005 12:15A
JAN/25/2005 12:15A
MOVE
4
SELECT
RETURN
EXIT
Press the …† buttons to select Partial Delete, then
press the ENTER or √ button.
Partial Delete
JAN/18/2005 12:15 AM CH11
DVD-RAM(VR)
Title List No. 01
2
With the unit in Stop mode/Playback mode, press the
TITLE LIST button.
The Title List screen is displayed.
Start
End
00:00:00
00:00:00
00:01:00
Start
End
Delete
MOVE
Return
SELECT
RETURN
EXIT
Title List
DVD-RAM(VR)
No.
01
02
03
04
Title
JAN/18/2005 12:15A
JAN/19/2005 12:15A
JAN/20/2005 12:15A
JAN/25/2005 12:15A
Length
00:10:21
00:40:03
00:20:15
00:50:16
JAN/18/2005 12:15 AM CH11
JAN/18/2005 12:15 AM
SP
1/1 Page
MOVE
SELECT
RETURN
EXIT
Using the MENU button.
• With the unit in Stop mode/Playback mode,
press the MENU button.
• Press the …† buttons to select Title,
then press the ENTER or √ button.
Editing
English - 85
00627D-DVD-TR520_XAA_81-86
5
2005.7.26
9:38 AM
Page 86
Press the ENTER button at the starting point.
The image and starting point time are displayed in the
section deletion starting point window.
7
Press the œ √ buttons to select Delete, then press
the ENTER button. You will be asked: "Do you want
to delete?".
Partial Delete
Partial Delete
DVD-RAM(VR)
DVD-RAM(VR)
JAN/18/2005 12:15 AM CH11
JAN/18/2005 12:15 AM CH11
Title List No. 01
Title List No. 01
Start
End
00:01:00
00:00:00
End
Delete
Start
End
00:01:00
00:06:35
Delete
Return
Return
MOVE
MOVE
End
00:06:35
00:01:00
Start
Start
SELECT
RETURN
SELECT
RETURN
EXIT
EXIT
Partial Delete
JAN/18/2005 12:15 AM CH11
DVD-RAM(VR)
Edit Title List Screen Elements
Title List No. 001
Start
End
Do you want to delete?
(Deleted part will not be restored.)
00:01:00
Partial Delete
Yes
JAN/18/2005 12:15 AM CH11
DVD-RAM(VR)
Start
Title List No. 01
Start
End
00:01:00
00:00:00
①
End
Delete
MOVE
RETURN
EXIT
➂
① Playback bar
➁ Playtime
➂ Section deletion starting point window and time
➃ Section deletion end point window and time
• Select the start and end points of the section you
want to delete using the playback related buttons.
• Playback related buttons :
(PLAY( ), SEARCH (
))
6
00:06:35
Return
SELECT
RETURN
EXIT
➃
➁
Return
SELECT
Delete
MOVE
00:06:35
Start
End
00:02:00
No
Press the ENTER button at the end point.
The image and end point time are displayed in the
Section deletion ending point window.
8
Press the œ √ buttons to select Yes, then press the
ENTER button. The selected section has been
deleted.
9
Press the œ √ buttons to select Return, then press
the ENTER button to finish the operation.
■
The length of the section to be deleted
must be at least 5 seconds long.
■
If the length of the section to be deleted is
less than 5 seconds, you will be prompted
with the message “The range is too
short.”.
■
If the end time precedes the starting time,
you will be prompted with the message
“End point cannot be marked earlier than
start point”.
■
Press the MENU button after the operation has
finished.
The Title List screen will disappear.
NOTE
Editing
Partial Delete
DVD-RAM(VR)
JAN/18/2005 12:15 AM CH11
Title List No. 01
Start
End
00:01:00
00:06:35
00:06:35
Start
End
Delete
MOVE
86 - English
Return
SELECT
RETURN
EXIT
00627D-DVD-TR520_XAA_87-98
2005.7.26
9:43 AM
Page 87
Advanced Editing
(Playlist)
3
Press the ANYKEY button.
Press the …† buttons to select Playlist, then
press the ENTER or √ button.
Title List
No.
DVD-RAM(VR)
Rename
Creating a Playlist
Protection
Delete
Partial Delete
Follow these instructions to create a new playlist entry
from a recorded title.
√
√
Playlist
JAN/18/2005 12:15 AM CH11
√
Navigation
JAN/18/2005 12:15 AM
√
Select Tray
SP
Disc Manager
MOVE
01
02
03
04
Title
Length
JAN/18/2005 12:15A
JAN/19/2005 12:15A
JAN/20/2005 12:15A
JAN/25/2005 12:15A
00:10:21
00:40:03
00:20:15
00:50:16
New Playlist
Go To Playlist
1/1 Page
SELECT
RETURN
EXIT
(VR mode)
Using the TITLE LIST button
1
2
4
Press the RECORDER button on the front panel or R
button on the remote control.
Press the …† buttons to select New Playlist,
then press the ENTER or √ button.
The Make Playlist screen is displayed.
Make Playlist
DVD-RAM(VR)
New Playlist
Scene No. 01
With the unit in Stop mode/Playback mode, press the
TITLE LIST button.
The Title List screen is displayed.
Title List 1/4
Start
End
00:00:00
00:00:00
00:00:00
Start
End
Make
MOVE
Return
SELECT
RETURN
EXIT
Title List
DVD-RAM(VR)
No.
01
02
03
04
Title
JAN/18/2005 12:15A
JAN/19/2005 12:15A
JAN/20/2005 12:15A
JAN/25/2005 12:15A
Length
00:10:21
00:40:03
00:20:15
00:50:16
5
Press the ENTER button at the start point.
JAN/18/2005 12:15 AM CH11
JAN/18/2005 12:15 AM
SP
Make Playlist
1/1 Page
MOVE
SELECT
RETURN
EXIT
DVD-RAM(VR)
New Playlist
Scene No. 01
Using the MENU button.
Title List 1/4
Start
End
00:00:10
00:00:00
00:00:10
• With the unit in Stop mode/Playback mode,
press the MENU button.
Start
End
MOVE
Make
Return
SELECT
RETURN
EXIT
then press the ENTER or √ button.
• The image and time at the start point are displayed on
the Start window.
• The yellow-colored selection bar moves to the End
item.
• Select the starting point of the section from which you
want to create a new scene using the playback
)).
related buttons (PLAY( ), SEARCH (
English - 87
Editing
• Press the …† buttons to select Title,
00627D-DVD-TR520_XAA_87-98
2005.7.26
9:43 AM
Page 88
Playing Entries in the Playlist
6
Press the ENTER button at the end point.
Follow these instructions to play the playlist entries.
Make Playlist
DVD-RAM(VR)
(VR mode)
New Playlist
Scene No. 01
Start
End
00:00:10
00:10:10
Using the PLAY LIST button
Title List 1/4
00:10:10
Start
End
MOVE
Make
Return
SELECT
RETURN
EXIT
• The image and end point time are displayed in the
End window.
• The yellow-colored selection bar moves to the
Make item.
7
8
1
Press the RECORDER button on the front panel or R
button on the remote control.
2
With the unit in Stop mode, press the PLAY LIST
button.
The Playlist screen is displayed.
Press the œ √ buttons to select Make, then press the
ENTER button.
• To make a scene for playlist.
A new Make scene screen is displayed.
Repeat steps 3~6 to make scene of playlist.
A new scene will be added to the current playlist.
You can check and view all the scenes on Edit playlist
screen. (See page 90)
• To make a new playlist, repeat steps 1~6.
Playlist
DVD-RAM(VR)
No.
01
02
03
04
Title
Length
00:10:21
JAN/19/2005 12:15A 00:40:03
JAN/20/2005 12:15A 00:20:15
JAN/25/2005 12:15A 00:50:16
Dolphin
JAN/18/2005 12:15 AM CH11
JAN/18/2005 12:15 AM
1 Scene
1/1 Page
MOVE
SELECT
RETURN
EXIT
Using the MENU button.
Press the œ √ button to select Return,
then press the ENTER button to finish the operation.
• With the unit in Stop mode, press the MENU
button.
• Press the …† buttons to select Title, then
press the ENTER or √ button. The Title List
screen is displayed.
• Press the ANYKEY button.
Editing
NOTE
■
You can create up to 99 playlist entries.
■
Depending on the type of disc used, the
displayed Make Playlist screen may
appear different.
88 - English
• Press the …† buttons to select Playlist, then press
the ENTER or √ button.
• Press the …† buttons to select Go To Playlist,
then press the ENTER or √ button.
3
Press the …† buttons to select the playlist you
want to play, then press the ENTER or PLAY ( )
button.
4
Press the STOP ( ) button to stop playing.
The screen returns to the Playlist screen.
00627D-DVD-TR520_XAA_87-98
2005.7.26
9:43 AM
Page 89
Renaming a Playlist Entry
Follow these instructions to rename a playlist entry, i.e.
to edit the name of a playlist entry.
3
Press the …† buttons to select the title you want to
Rename from the Playlist, then press the ANYKEY
button.
ANYKEY menu is displayed : Rename, Delete, Edit
Playlist, Go To Titlelist, Disc Manager
(VR mode)
Playlist
No.
DVD-RAM(VR)
Using the PLAY LIST button
01
02
03
04
Rename
Title
Length
JAN/18/2005 12:15A
JAN/19/2005 12:15A
JAN/20/2005 12:15A
JAN/25/2005 12:15A
00:10:21
00:40:03
00:20:15
00:50:16
Delete
JAN/16/2005 12:15 AM CH11
1
Press the RECORDER button on the front panel or R
button on the remote control.
2
With the unit in Stop mode, press the PLAY LIST
button.
The Edit Playlist screen is displayed.
Edit Playlist
JAN/16/2005 12:15 AM
Go To Titlelist
7 Scenes
1/1 Page
Disc Manager
MOVE
4
SELECT
RETURN
EXIT
Press the …† buttons to select Rename, then press
the ENTER or √ button.
The Rename screen is displayed.
Playlist
DVD-RAM(VR)
No.
01
02
03
04
Title
JAN/18/2005 12:15A
JAN/19/2005 12:15A
JAN/20/2005 12:15A
JAN/25/2005 12:15A
Rename
Length
DVD-RAM(VR)
00:10:21
00:40:03
00:20:15
00:50:16
1 8 / JAN / 2005 12:15 AM
JAN/18/2005 12:15 AM CH11
JAN/18/2005 12:15 AM
1 Scene
1/1 Page
Back Space
MOVE
SELECT
RETURN
Space Delete
Clear
Save
EXIT
MOVE
SELECT
RETURN
EXIT
Using the MENU button.
• With the unit in Stop mode, press the MENU
button.
• Press the …† buttons to select Title,
5
Select the desired characters using the …† œ √
buttons, then press the ENTER button.
then press the ENTER or √ button.
The Title List screen is displayed.
• Press the ANYKEY button.
Rename
DVD-RAM(VR)
Dolphin
• Press the …† buttons to select Playlist, then press
the ENTER or √ button.
Back Space
MOVE
Space Delete
SELECT
Clear
RETURN
Save
EXIT
• This function is the same as the Rename function in
the renaming the title. (See page 82)
• The maximum number of characters that can be
entered is 31. All 31 characters can be displayed
by pressing the INFO button.
English - 89
Editing
• Press the …† buttons to select Go To Playlist,
then press the ENTER or √ button.
00627D-DVD-TR520_XAA_87-98
6
2005.7.26
9:44 AM
Page 90
Press the …† œ √ buttons to select Save, then press
the ENTER button.
The changed title is displayed in the title field of the
selected playlist entry.
3
Press the …† buttons to select the title you want to
edit from the Playlist, then press the ANYKEY button.
The Edit Playlist menu is displayed: Rename, Delete,
Edit Playlist, Go To Titlelist, Disc Manager.
Playlist
DVD-RAM(VR)
No.
01
02
03
04
Title
Playlist
Length
DVD-RAM(VR)
00:10:21
JAN/19/2005 12:15A 00:40:03
JAN/20/2005 12:15A 00:20:15
JAN/25/2005 12:15A 00:50:16
Dolphin
No.
01
02
03
04
Rename
Dolphin
Length
JAN/18/2005 12:15A
JAN/19/2005 12:15A
JAN/20/2005 12:15A
JAN/25/2005 12:15A
00:10:21
00:40:03
00:20:15
00:50:16
Delete
JAN/16/2005 12:15 AM CH11
18/JAN/2005 12:15 AM
Edit Playlist
6 Scenes
JAN/16/2005 12:15 AM
1/1 Page
MOVE
Title
SELECT
Go To Titlelist
7 Scenes
RETURN
1/1 Page
Disc Manager
EXIT
MOVE
Editing a Scene for the Playlist
4
Follow these instructions to edit scenes for a playlist.
SELECT
RETURN
EXIT
Press the …† buttons to select Edit Playlist,
then press the ENTER or √ button.
The Edit Playlist Scene screen is displayed.
Edit Playlist
Playlist No. 1
DVD-RAM(VR)
(VR mode)
01
00:00:26
02
0:00:07
03
00:06:04
05
0:00:26
06
00:01:07
07
00:00:00
04
0:00:03
Using the PLAY LIST button
1/1 Page
MOVE
1
Press the RECORDER button on the front panel or R
button on the remote control.
2
With the unit in Stop mode, press the PLAY LIST
button.
The Edit Playlist screen is displayed.
Playlist
DVD-RAM(VR)
No.
Editing
01
02
03
04
Title
JAN/18/2005 12:15A
JAN/19/2005 12:15A
JAN/20/2005 12:15A
JAN/25/2005 12:15A
Return
SELECT
RETURN
EXIT
Playing a Selected Scene
5
Press the …†œ √ buttons to select the scene you
want to play, then press the ANYKEY button.
The playlist entry to be played is selected.
Length
00:10:21
00:40:03
00:20:15
00:50:16
Edit Playlist
Playlist No. 1
DVD-RAM(VR)
JAN/18/2005 12:15 AM CH11
JAN/18/2005 12:15 AM
6 Scenes
1/1 Page
MOVE
SELECT
RETURN
01
EXIT
0:00:26
Play
02
0:00:07
03
00:06:04
06
00:01:07
07
00:00:00
04
0:00:03
Modify
Move
05
Add0:00:26
Delete
Using the MENU button.
• With the unit in Stop mode, press the MENU
button.
• Press the …† buttons to select Title, then
press the ENTER or √ button.
The Title List screen is displayed.
• Press the ANYKEY button.
• Press the …† buttons to select Playlist, then press
the ENTER or √ button.
• Press the …† buttons to select Go To Playlist,
then press the ENTER or √ button.
90 - English
1/1 Page
MOVE
SELECT
Return
RETURN
EXIT
00627D-DVD-TR520_XAA_87-98
6
2005.7.26
9:44 AM
Press the …† buttons to select Play, then press the
ENTER or √ button.
The selected scene is played.
Page 91
7
Press the ENTER button at the start point of the scene.
Modify Scene
DVD-RAM(VR)
JAN/16/2005 12:15
Scene No. 001
√ PLAY
Title List : 1/7
Start
End
00:00:20
00:00:00
00:00:20
Start
End
Change
MOVE
Cancel
SELECT
RETURN
EXIT
• The image and starting point time are
• To stop scene play, press the STOP (
displayed on the Start window.
) button.
• Select the starting or ending point of the
section you want to modify using the playback
related buttons (PLAY( ), SEARCH (
)).
Modifying a Scene (Replacing a Scene)
To setup, follow steps 1 to 4 in page 90.
5
8
Press the ENTER button at the end point of the scene.
Modify Scene
Press the …† œ √ buttons to select the scene you
want to modify, then press the ANYKEY button.
JAN/16/2005 12:15
DVD-RAM(VR)
Scene No. 01
Title List : 1/7
Edit Playlist
End
00:00:30
Change
MOVE
0:00:26
00:00:20
00:00:30
Start
Play
End
Playlist No. 1
DVD-RAM(VR)
01
Start
02
0:00:07
03
00:06:04
06
00:01:07
07
00:00:00
04
Cancel
SELECT
RETURN
EXIT
0:00:03
Modify
Move
05
Add0:00:26
Delete
1/1 Page
MOVE
6
• The image and ending point time are displayed
in the End window.
• The yellow-colored selection bar moves to the
Change item.
Return
SELECT
RETURN
EXIT
Press the …† buttons to select Modify, then press the
ENTER or √ button.
The Modify Scene screen is displayed.
9
Press the œ √ buttons to select Change, then press
the ENTER button.
Playlist No. 1
Modify Scene
DVD-RAM(VR)
JAN/16/2005 12:15
01
00:00:10
02
0:00:07
03
00:00:10
05
0:00:26
06
00:01:07
07
00:00:00
04
0:00:03
Scene No. 01
Start
End
1/1 Page
00:00:00
Title List : 1/7
MOVE
00:00:00
SELECT
Return
RETURN
EXIT
00:00:20
Start
End
Change
MOVE
Cancel
SELECT
RETURN
EXIT
• The scene you want to modify is changed with the
selected section.
English - 91
Editing
Edit Playlist
DVD-RAM(VR)
00627D-DVD-TR520_XAA_87-98
2005.7.26
9:44 AM
Page 92
Moving a Scene (Changing the Position of a Scene)
7
Press the …† œ √ buttons to select the position
to which you want to move the selected scene,
then select the ENTER button.
To setup, follow steps 1 to 4 in page 90.
Edit Playlist
Playlist No. 1
DVD-RAM(VR)
5
Press the …† œ √ buttons to select the scene you
want to move (change the position), then press the
ANYKEY button.
01
00:00:26
02
00:00:07
03
00:00:04
05
00:00:26
02
00:00:26
07
00:00:00
1/1 Page
Edit Playlist
DVD-RAM(VR)
01
0:00:26
Play
Playlist No. 1
02
0:00:07
03
00:06:04
04
06
00:01:07
07
00:00:00
MOVE
Delete
1/1 Page
MOVE
Cancel
RETURN
EXIT
• The selected scene is moved to the selected
position.
Move
Add0:00:26
SELECT
00:00:03
0:00:03
Modify
05
04
Return
SELECT
RETURN
EXIT
Edit Playlist
Playlist No. 1
DVD-RAM(VR)
6
Press the …† buttons to select Move, then press the
ENTER or √ button.
01
00:00:07
02
00:00:04
03
00:00:03
05
00:00:26
06
00:00:26
07
00:00:00
04
1/1 Page
MOVE
Edit Playlist
01
00:00:26
02
00:00:07
03
00:00:04
05
00:00:26
06
00:01:07
07
00:00:00
04
SELECT
Cancel
RETURN
EXIT
• A yellow outline is displayed around the
scene to be moved.
Editing
EXIT
00:00:03
■
1/1 Page
92 - English
Return
RETURN
Playlist No. 1
DVD-RAM(VR)
MOVE
SELECT
00:00:26
NOTE
Depending on the type of disc you are
using, the displayed screen may appear
slightly different.
00627D-DVD-TR520_XAA_87-98
2005.7.26
9:44 AM
Page 93
8
Adding a Scene
Press the ENTER button at the end point of the scene.
Add Scene
To setup, follow steps 1 to 4 on page 90.
DVD-RAM(VR)
JAN/16/2005 12:15AM
Scene No. 01
5
Press the …† œ √ buttons to select the scene that
will have a new scene inserted before it, then press
the ANYKEY button.
Title List : 1/7
Start
End
00:00:15
00:00:35
00:00:35
Start
End
Add
Cancel
MOVE
SELECT
RETURN
EXIT
Edit Playlist
Playlist No. 1
DVD-RAM(VR)
01
0:00:26
Play
02
0:00:07
03
02
00:00:07
07
00:00:04
04
• The image and time of the end point are displayed in
the End window.
• To cancel, press the œ √ buttons to select Cancel,
then press the ENTER button.
0:00:03
Modify
Move
01
Add0:00:26
Delete
00:00:00
1/1 Page
MOVE
Return
SELECT
RETURN
EXIT
9
6
Press the œ √ buttons to select Add, then press the
ENTER button.
Press the …† buttons to select Add, then press the
ENTER or √ button.
The Add Scene screen is displayed.
Edit Playlist
Playlist No. 1
DVD-RAM(VR)
01
00:00:15
02
00:00:26
03
06
00:00:26
07
00:00:07
04
00:00:04
08
00:00:00
Add Scene
DVD-RAM(VR)
JAN/16/2005 12:15AM
05
00:00:03
Scene No. 01
Start
MOVE
00:00:00
Title List : 1/7
End
Add
MOVE
7
Cancel
SELECT
SELECT
Return
RETURN
EXIT
00:00:00
00:00:00
Start
00:00:07
1/1 Page
End
RETURN
EXIT
• The section you want to add is inserted prior to the
scene selected in step 4 of Adding a Scene on the
previous page.
Press the ENTER button at the starting point of the
scene.
Add Scene
DVD-RAM(VR)
JAN/16/2005 12:15AM
Editing
Scene No. 01
Title List : 1/7
Start
End
00:00:15
00:00:00
00:00:15
Start
End
MOVE
Add
Cancel
SELECT
RETURN
EXIT
• The image and starting point time are displayed
on the Start window.
• Select the starting or ending point of the
section you want to modify using the playback
related buttons (PLAY( ), SKIP (
)).
English - 93
00627D-DVD-TR520_XAA_87-98
2005.7.26
9:44 AM
Page 94
Deleting a Scene
Deleting a Playlist Entry from the
Playlist
To setup, follow steps 1 to 4 in page 90.
5
Using the PLAY LIST button
Press the …† œ √ buttons to select the scene you
want to delete, then press the ANYKEY button.
Edit Playlist
Playlist No. 1
DVD-RAM(VR)
01
0:00:26
02
Play
0:00:07
03
00:06:04
04
Move
Add0:00:26
06
00:01:07
Delete
07
00:00:00
1/1 Page
MOVE
Press the RECORDER button on the front panel or R
button on the remote control.
2
With the unit in Stop mode, press the PLAY LIST
button.
The Edit Playlist screen is displayed.
0:00:03
Modify
05
1
Return
SELECT
RETURN
EXIT
Playlist
DVD-RAM(VR)
6
No.
01
02
03
04
Press the …† buttons to select Delete, then press
the ENTER or √ button.
Title
Length
JAN/18/2005 12:15A
JAN/19/2005 12:15A
JAN/20/2005 12:15A
JAN/25/2005 12:15A
00:10:20
00:40:03
00:20:15
00:50:16
JAN/18/2005 12:15 AM CH11
JAN/18/2005 12:15 AM
SP
1/1 Page
Edit Playlist
01
the scene
0:00:26 Do02you want
0:00:07 to delete
03
00:06:04
04
Yes
05
0:00:26
06
MOVE
Playlist No. 1
DVD-RAM(VR)
? 0:00:03
Return
SELECT
RETURN
EXIT
• With the unit in Stop mode, press the MENU
button.
00:01:07
MOVE
RETURN
Using the MENU button.
No
1/1 Page
SELECT
• Press the …† buttons to select Title, then
EXIT
press the ENTER or √ button.
• The message “Do you want to delete the scene ?” is
displayed.
7
The Title List screen is displayed.
• Press the ANYKEY button.
• Press the …† buttons to select Playlist, then press
the ENTER or √ button.
Press the œ √ buttons to select Yes,
then press the ENTER to delete the selected scene.
• Press the …† buttons to select Go To Playlist,
then press the ENTER or √ button.
Edit Playlist
Playlist No. 1
Editing
DVD-RAM(VR)
01
00:00:26
02
0:00:07
05
0:00:26
06
00:00:00
03
00:06:04
04
1/1 Page
MOVE
SELECT
3
0:00:03
Return
RETURN
Press the …† buttons to select the title you want to
delete from the Playlist, then press the ANYKEY
button.
The Edit Playlist menu is displayed:Rename, Delete,
Edit Playlist, Go To Titlelist, Disc Manager.
EXIT
Playlist
DVD-RAM(VR)
No.
01
02
03
04
Rename
Title
JAN/18/2005 12:15A
JAN/19/2005 12:15A
JAN/20/2005 12:15A
JAN/25/2005 12:15A
Length
00:10:21
00:40:03
00:20:15
00:50:16
Delete
JAN/16/2005 12:15 AM CH11
Edit Playlist
JAN/16/2005 12:15 AM
Go To Titlelist
7 Scenes
1/1 Page
Disc Manager
MOVE
94 - English
SELECT
RETURN
EXIT
00627D-DVD-TR520_XAA_87-98
4
2005.7.26
9:44 AM
Press the …† buttons to select Delete, then press
the ENTER or √ button.
• You will be prompted with the delete confirmation
message “Do you want to delete?”.
Page 95
Title Copy
Playlist
DVD-RAM(VR)
About the Copy Screen
Do you want to delete?
JAN/18/2005 12:15 AM CH11
JAN/18/2005 12:15 AM
Yes
No
Copy
7 Scenes
DVD-RAM(VR)
MOVE
SELECT
RETURN
EXIT
!
@
No.
1
Copy To : DVD-RAM(VR) ➞ DVD-RAM(VR)
Title
Rec.Mode
JAN/01/2005 20:25A SP ➞ HS
Add a list
Length
00:01:40
Start
Rec. Mode
[ R ] Available
XP 00:59:43
#
$
5
Press the œ √ buttons to select Yes, then press the
ENTER button.
You automatically returned to the Playlist screen after
the delete operation has finished.
3.80 GB
[ P ] Total
00:00:16
0.01 GB
MOVE
SELECT
RETURN
%
^
&
*
EXIT
! Title to be copied
@ Add titles to be copied (up to 7 titles can be copied
at one time)
Playlist
# Recording mode for copying
DVD-RAM(VR)
Deleting...
(Please wait)
$
%
^
&
JAN/18/2005 12:15 AM CH11
JAN/18/2005 12:15 AM
7 Scenes
*
Playlist
DVD-RAM(VR)
No.
01
02
03
Title
Lengtha
- HS(high speed): you can copy more quickely than
normal playback speed.
Copies in the same record mode as source title.
- XP/SP/LP/EP : you can not use high speed copy.
Record time of title to be copied
Copy start button
Record mode setup button
Remaining time and space on the current disc in
DVD Record mode
Total record time and space of selected titles for
copying
JAN/19/2005 12:15A 00:40:03
JAN/20/2005 12:15A 00:40:03
JAN/25/2005 12:15A 00:50:16
Contents(Title) Copy Specifications
JAN/19/2005 12:15 AM CH11
JAN/19/2005 12:15 AM
7 Scenes
1/1 Page
MOVE
SELECT
RETURN
EXIT
No
No
No
No
No
No
No
No
DVD-R
Recorded Video Title
Copy Protected
Title
Copy Once Title
Yes
Yes = Contents(Title) copying is possible.
No = Contents(Title) copying is not possible.
Protection
This TWIN TRAY DVD RECORDER can allow you to
protect the contents of your discs, as described below.
• Title Protection : See page 83 “Locking(Protecting) a
Title”
• Disc Protection : See page 104 “Disc Protection”
• Title copy will function only if protection is cleared.
English - 95
Editing
DVD-RW
(V mode)
Yes
DVD-RAM
Yes
DVD-RW
(VR mode)
Yes
Contents(Title)
00627D-DVD-TR520_XAA_87-98
Player Tray
DVD-RAM
DVD-RW(VR)
Copy contents
Unedited Title
Edited Title
Playlist
DVD-RW(V)
DVD-R(V)
Title copy
Media
2005.7.26
9:44 AM
Page 96
Recorder Tray
High speed Copy
Normal Copy
RAM RW(VR) RAM RW(VR) RW(V) R(V)
Yes
Yes Yes Yes Yes Yes
No
No
Yes Yes Yes Yes
No
No
Yes Yes Yes Yes
No
No
Yes
Yes
Yes
4
With the unit in Stop mode/Playback mode, press the
TITLE LIST button.
The Title List screen is displayed.
Title List
Yes
No.
DVD-RAM(VR)
01
02
03
04
Yes = Contents(Title) copying is possible.
No = Contents(Title) copying is not possible.
Title
Length
JAN/18/2005 12:15A
JAN/19/2005 12:15A
JAN/20/2005 12:15A
JAN/25/2005 12:15A
00:10:21
00:20:15
00:20:15
00:50:16
JAN/18/2005 12:15 AM CH11
• High speed copy works only with the same Mode
(VR ➞ VR).
• Only Single-Layered Discs can be copied.
• When using High speed Copy, recording available time
may differ depending on the amount of recorded data.
• High speed copy is done at the default speed of x2(DVDRAM), x4(DVD-RW) or x8(DVD-R).
• MP3, JPEG, DivX, VCD, CDDA discs cannot be copied.
• Copy screen is not displayed during High or Normal
speed Copy. The current Broadcast is displayed instead.
JAN/18/2005 12:15 AM
SP
2
Press the OPEN/CLOSE button and place a disc that
contains a title you want to copy.
Editing
3
Press the OPEN/CLOSE button to close the disc
tray. Wait until LOAD disappears from the front panel
display and check that the recordable disc is in the R
Tray.
EXIT
• Press the …† buttons to select Title,
then press the ENTER or √ button.
The Title List screen is displayed.
Press the …† buttons to select the title you want to
copy.
To move to other pages, press the SKIP(
buttons.
SKIP( ) : previous page of title list
SKIP( ) : next page of title list
6
)
Press ANYKEY button, then press the …† buttons
to select COPY, then press the ENTER or √ button.
Title List
SP
DVD-RAM(VR)
No.
Copy
01 JAN/18/2005 12:15A
02 JAN/19/2005 12:15A
03 JAN/20/2005 12:15A
004TitleJAN/25/2005 12:15A
√
Playlist
JAN/18/2005 12:15 AM CH11
Scene Navigation
JAN/18/2005 12:15 AM
Time Navigation
Title
Length
00:10:21
00:40:03
00:20:15
00:50:16
Disc
1/1 Page
√
Select Tray
MOVE
96 - English
RETURN
• With the unit in Stop mode/Playback mode,
press the MENU button.
Using the TITLE LIST button
Press the PLAYER button on the front panel or P
button on the remote control.
SELECT
Using the MENU button.
5
1
1/1 Page
MOVE
SELECT
RETURN
EXIT
00627D-DVD-TR520_XAA_87-98
7
2005.7.27
1:19 AM
Page 97
Press the …† buttons to select Title, then press the
ENTER or √ button.
The Copy screen is displayed.
- Copying a Title that has been edited
once before -
9
The “Do you want to view screen of copying title?”
message is displayed.
Copy
DVD-RAM(VR)
No.
Copy To : DVD-RAM(VR) ➞ DVD-RAM(VR)
Title
Rec.Mode
JAN/18/2005 12:15A LP ➞ HS
Add a list
1
Copy
DVD-RAM(VR)
Length
00:10:21
Start
No.
Rec. Mode
Copy To : DVD-RAM(VR) ➞ DVD-RAM(VR)
Title
Rec.Mode
Length
JAN/18/2005 12:15A LP ➞ HS 00:10:21
Start
Do you want
view screen of copying title?
Add to
a list
Rec. Mode
1
[ R ] Available
XP 00:59:43
3.80 GB
[ P ] Total
Yes
00:00:16
0.01 GB
MOVE
SELECT
RETURN
[DVD] Available
LP
04: 08:47
Total
04: 08:47
EXIT
MOVE
• If you want to change the record mode when copying,
see page 98.
8
No
10
SELECT
RETURN
EXIT
To copy a title while viewing the title on the copy
screen, press the œ √ buttons to select Yes, then
press the ENTER button.
Press the ENTER or √ button to select Start,
then press the ENTER button.
Copy
DVD-RAM(VR)
No.
1
Copy To : DVD-RAM(VR) ➞ DVD-RAM(VR)
Title
Rec.Mode
JAN/18/2005 12:15A LP ➞ HS
Add a list
Length
00:10:21
Start
1%
DVD
Rec. Mode
[ R ] Available
LP 00:59:43
DVD
If you want to stop copy, press CANCEL key.
3.80 GB
[ P ] Total
00:00:16
0.01 GB
MOVE
SELECT
RETURN
• If No is selected, the title to be copied is not displayed
on the screen. Copying begins while the current
broadcast program is displayed on the screen.
• To cancel the copying in progress, press the
CANCEL button.
• Press the INFO button to disappear the copy
processing bar.
EXIT
- About Using DIRECT COPY button -
- Copying an Unedited title -1 The “Do you want to use high speed copy mode?”
message is displayed.
9
Copy
DVD-RAM(VR)
No.
1
Copy To : DVD-RAM(VR) ➞ DVD-RAM(VR)
Title
Rec.Mode
Length
JAN/18/2005 12:15A LP ➞ HS 00:10:21
Start
Do you want
use high speed copy mode?
Add to
a list
Rec. Mode
Yes
No
[DVD] Available
LP
04: 08:47
Total
04: 08:47
MOVE
SELECT
RETURN
EXIT
English - 97
Editing
Press the …† buttons to select title that you want
to copy from the title list and then press the
DIRECT COPY button on the remote control. You
will then be brought to the copy screen.
• During Playback, you can also copy the title by
pressing the DIRECT COPY button. After select
Copy Mode to title, you can go to copy screen.
00627D-DVD-TR520_XAA_87-98
■
NOTE
2005.7.27
5:22 AM
Page 98
High speed copy : Copying can be performed
at the maximum speed possible (4x).
-1 To begin high speed copy, press the œ √ buttons to
select Yes, then press the ENTER button.
High speed copy begins. The title being copied is not
played back. The current broadcast program is
displayed on the screen.
10
Changing the Record Mode
To setup, follow steps 1 to 7 in page 96~97.
8
Press the √ and † buttons to select Rec. Mode, then
press the ENTER button.
Copy
DVD-RAM(VR)
No.
1
Copy To : DVD-RAM(VR) ➞ DVD-RAM(VR)
Title
Rec.Mode
JAN/18/2005 12:15A LP ➞ HS
Add a list
Length
00:10:21
Start
Rec. Mode
XPAvailable
[DVD]
LPSP 04: 08:47
LP
EP Total
High 04:
Speed
08:47
MOVE
DVD
1%
9
Press the …† buttons to select the record mode you
want to use, then press the ENTER button.
■
-1 After a successful copy, “The title is successfully
copied” message is displayed.
NOTE
■
■
■
Editing
■
■
■
98 - English
EXIT
• HS(High Speed) : Copies in the same record mode
the original disc was recorded in.
• XP/SP/LP/EP : You cannot copy a disc at a higher
quality than it was originally recorded in. If the
same record mode is selected, the title is copied
at high speed.
• If No is selected, the title to be copied is displayed at
its playback speed while copying.
• To cancel the copying in progress, press the
CANCEL button.
• Press the INFO button to disappear the copy
processing bar.
The title is successfully copied.
RETURN
DVD
If you want to stop copy, press CANCEL key.
11
SELECT
This unit can not open the P tray and the R
tray simultaneously.
Using the same method, you can copy a
Playlist.
High speed copying is not available for a title
list that has been deleted partially.
During copying, timer recording is not
available.
High speed copying is not available when:
- Copying a title that can only be copied once
- Copying a playlist
- Copying a partially-deleted title
Regarding title lists that can be copied only
once:
- Only available for DVD discs that support
CPRM.
- If a playlist contains a scene that can only be
copied once, it cannot be copied.
The High Speed copying can be carried out
at the maximun speed possible.
00627D-DVD-TR520_XAA_99-108
2005.7.26
9:50 AM
Copying Multiple Titles
at One Time
Page 99
6
Press the ANYKEY button.
Title List
DVD-RW(VR)
No.
001
002
003
004
√
Copy
Title
Playlist
JAN/18/2005 12:15 AM CH11
Scene Navigation
JAN/18/2005 12:15 AM
Time Navigation
SP
√
Select Tray
MOVE
Using the TITLE LIST button
1
Press the PLAYER button on the front panel or P
button on the remote control.
2
Press the OPEN/CLOSE button and place a disc that
contains a title you want to copy.
3
Press the OPEN/CLOSE button to close the disc
tray. Wait until LOAD disappears from the front panel
display and check that the recordable disc is in the R
Tray.
7
1/1 Page
SELECT
RETURN
Copy To : DVD-RAM(VR) ➞ DVD-RAM(VR)
Title
Rec.Mode
JAN/18/2005 12:15A LP ➞ HS
Add a list
1
Length
00:10:21
Start
Rec. Mode
[ R ] Available
LP 00:59:43
3.80 GB
[ P ] Total
00:00:16
0.01 GB
MOVE
8
SELECT
RETURN
No.
001
002
003
004
Title
JAN/18/2005 12:15A
JAN/19/2005 12:15A
JAN/20/2005 12:15A
JAN/25/2005 12:15A
Copy
DVD-RAM(VR)
Length
00:10:21
00:40:03
00:20:15
00:50:16
No.
1
Copy To : DVD-RAM(VR) ➞ DVD-RAM(VR)
Title
Rec.Mode
JAN/18/2005 12:15A LP ➞ HS
Add a list
Length
00:10:21
Delete
JAN/18/2005 12:15 AM
Preview
SELECT
RETURN
EXIT
Rec. Mode
3.80 GB
[ P ] Total
00:00:16
0.01 GB
√
Rec. Mode
1/1 Page
MOVE
Start
[ R ] Available
LP 00:59:43
Add
JAN/18/2005 12:15 AM CH11
SP
EXIT
Press the ANYKEY button.
Title List
DVD-RAM(VR)
EXIT
Copy
DVD-RAM(VR)
With the unit in Stop mode/Playback mode, press the
TITLE LIST button.
The Title List screen is displayed.
00:10:21
00:40:03
00:20:15
00:50:16
Press the …† buttons to select Copy, then press the
ENTER or √ button and select Title.
The Copy screen is displayed.
No.
4
Length
JAN/18/2005 12:15A
JAN/19/2005 12:15A
JAN/20/2005 12:15A
JAN/25/2005 12:15A
MOVE
SELECT
RETURN
EXIT
Editing
Using the MENU button.
• With the unit in Stop mode/Playback mode,
press the MENU button.
• Press the …† buttons to select Title,
then press the ENTER or √ button.
The Title List screen is displayed.
5
Press the …† buttons to select one of the title you
want to copy.
)
To move to other pages, press the SKIP (
buttons.
SKIP( ) : previous page of title list
SKIP( ) : next page of title list
English - 99
00627D-DVD-TR520_XAA_99-108
9
2005.7.26
9:50 AM
Press the …† buttons to select Add, then press the
ENTER button.
The Add Copy List screen is displayed.
Press the …† buttons to select the title you want to
copy, then press the ENTER button.
Other method: Press the …† buttons to select Add a
list, then press the ENTER button.
Press the …† buttons to select the title you want to
copy, then press the ENTER button.
Page 100
Deleting an Undesired Title from the
Copy List
To setup, follow steps 1 to 7 in page 99 and then continue
with step 8 below.
8
Press the …† buttons to select a title you want to
delete from the copy screen.
Copy
DVD-RAM(VR)
Add Copy List
DVD-RAM(VR)
No.
001
002
003
004
Title
Length
JAN/18/2005 12:15A
JAN/19/2005 12:15A
JAN/20/2005 12:15A
JAN/25/2005 12:15A
No.
00:10:21
00:40:03
00:20:15
00:50:16
Copy To : DVD-RAM(VR) ➞ DVD-RAM(VR)
Title
Rec.Mode
JAN/18/2005 12:15A LP ➞ HS
JAN/19/2005 13:15A LP ➞ HS
JAN/20/2005 15:15A LP ➞ HS
Add a list
1
2
3
Length
00:10:21
00:15:21
00:30:21
Start
Rec. Mode
[ R ] Available
LP 00:59:43
3.80 GB
JAN/18/2005 12:15 AM CH11
[ P ] Total
00:00:16
0.01 GB
JAN/18/2005 12:15 AM
SP
1/1 Page
MOVE
10
SELECT
MOVE
RETURN
Repeat steps 8~9 to copy additional titles.
Copy
DVD-RAM(VR)
No.
Copy To : DVD-RAM(VR) ➞ DVD-RAM(VR)
Title
Rec.Mode
JAN/18/2005 12:15A LP ➞ HS
JAN/19/2005 13:15A LP ➞ HS
JAN/20/2005 15:15A LP ➞ HS
Add a list
1
2
3
Length
00:10:21
00:15:21
00:30:21
9
Rec. Mode
[ R ] Available
LP 00:59:43
Copy
3.80 GB
DVD-RAM(VR)
RETURN
No.
Title
Rec.Mode
Length
JAN/18/2005 12:15A LP ➞ HS 00:10:21
Do youLPwant
JAN/19/2005 13:15A
➞ HS to delete?
00:15:21
JAN/20/2005 15:15A LP ➞ HS 00:30:21
Add a list
1
2
3
EXIT
Copy To : DVD-RAM(VR) ➞ DVD-RAM(VR)
Yes
11
EXIT
Start
00:00:16
0.01 GB
SELECT
RETURN
Press the ANYKEY button.
Press the …† buttons to select Delete, then press the
ENTER or √ button.
The message “Do you want to delete?” is displayed.
[ P ] Total
MOVE
SELECT
EXIT
Start
Rec. Mode
[DVD] Available
LP 04:00:16
4.48 GB
No
Total
01:06:03
1.88 GB
Press the ENTER or √ buttons to select Start,
then press the ENTER button.
MOVE
SELECT
RETURN
EXIT
Copy
DVD-RAM(VR)
No.
Editing
1
2
3
Copy To : DVD-RAM(VR) ➞ DVD-RAM(VR)
Title
Rec.Mode
JAN/18/2005 12:15A LP ➞ HS
JAN/19/2005 13:15A LP ➞ HS
JAN/20/2005 15:15A LP ➞ HS
Add a list
10
Length
00:10:21
00:15:21
00:30:21
Start
Rec. Mode
[ R ] Available
LP 00:59:43
Press the œ √ buttons to select Yes, then press the
ENTER button.
The selected title is deleted.
3.80 GB
[ P ] Total
00:00:16
0.01 GB
MOVE
SELECT
RETURN
Copy
EXIT
The added title lists are copied.
To cancel the copying in progress, press the CANCEL
button.
DVD-RAM(VR)
Copy To : DVD-RAM(VR) ➞ DVD-RAM(VR)
No.
Title
Rec.Mode
Length
1
3
JAN/19/2005 13:15A
JAN/20/2005 15:15A
LP ➞ HS
LP ➞ HS
00:15:21
00:30:21
Add a list
■
If copy list contains at least one title that
cannot be copied at high speed, it performs
step 9 described on page 97.
Otherwise, it performs the step 9-1 described
on page 97.
100 - English
Rec. Mode
[ R ] Available
LP 00:59:43
3.80 GB
[ P ] Total
00:00:16
0.01 GB
MOVE
NOTE
Start
SELECT
RETURN
EXIT
00627D-DVD-TR520_XAA_99-108
2005.7.26
9:50 AM
Page 101
Previewing a Selected Title from the
Copy List
Selecting Record Mode of Each
Title from the Copy List
To setup, follow steps 1 to 7 in page 99 and then continue
You can copy multiple titles while setting different record
with step 8 below.
modes for each title.
To setup, follow steps 1 to 7 in page 99 and then continue
8
Press the …† buttons to select a title you want to
preview in the copy screen.
8
Copy
DVD-RAM(VR)
No.
Press the …† buttons to select a title to change its
record mode in the copy screen.
Copy To : DVD-RAM(VR) ➞ DVD-RAM(VR)
Title
Rec.Mode
JAN/18/2005 12:15A LP ➞ HS
JAN/19/2005 13:15A SP ➞ LS
JAN/20/2005 15:15A SP ➞ HS
Add a list
1
2
3
with step 8 below.
Length
00:10:21
00:15:21
00:30:21
Start
Copy
Rec. Mode
DVD-RAM(VR)
[ R ] Available
LP 00:59:43
No.
3.80 GB
00:00:16
0.01 GB
MOVE
SELECT
RETURN
Title
Rec.Mode
JAN/18/2005 12:15A LP ➞ HS
JAN/19/2005 13:15A SP ➞ LS
JAN/20/2005 15:15A SP ➞ HS
Add a list
1
2
3
[ P ] Total
Copy To : DVD-RAM(VR) ➞ DVD-RAM(VR)
EXIT
Length
00:10:21
00:15:21
00:30:21
Start
Rec. Mode
[ R ] Available
LP 00:59:43
3.80 GB
[ P ] Total
00:00:16
0.01 GB
MOVE
9
Press the ANYKEY button.
Press the …† buttons to select Preview, then press the
ENTER or √ button.
You can preview the selected title through the display
window located at the center of the screen.
9
SELECT
RETURN
Press the ANYKEY button. Press the …† buttons to
select Rec. Mode, then press the ENTER or √
button.
Copy
Copy
DVD-RAM(VR)
No.
1
2
3
Title
DVD-RAM(VR)
Copy To : DVD-RAM(VR) ➞ DVD-RAM(VR)
Rec.Mode
JAN/18/2005 12:15A LP ➞ HS
JAN/19/2005 13:15A SP ➞ LS
JAN/20/2005 15:15A SP ➞ HS
Add a list
No.
Length
00:10:21
00:15:21
00:30:21
1
2
3
Start
Rec. Mode
[ R ] Available
LP 00:59:43
3.80 GB
00:00:16
0.01 GB
Rec.Mode
Length
JAN/18/2005 12:15A LP ➞ HS
JAN/19/2005 13:15A SP ➞ LS
JAN/20/2005 15:15A SP ➞ HS
Add
XP
Add a list
Delete
SP
Title
00:10:21
00:15:21
00:30:21
MOVE
EXIT
Press the RETURN button to exit the Preview mode.
LP
√
Rec. Mode
Start
Rec. Mode
[ R ] Available
LP 00:59:43
3.80 GB
[ P ] Total
00:00:16
0.01 GB
EP
SELECT
RETURN
EXIT
10
Press the …† buttons to select the record mode you
want, then press the ENTER or √ button.
11
Repeat steps 9~11 to select a title to change it’s
record mode.
The rest of the copying process can be performed
as described on pages 96 to 97.
English - 101
Editing
10
RETURN
Copy To : DVD-RAM(VR) ➞ DVD-RAM(VR)
Preview
[ P ] Total
SELECT
EXIT
00627D-DVD-TR520_XAA_99-108
2005.7.26
9:50 AM
Changing Record Mode of All Titles
from the Copy List
Page 102
Disc Copy
You can copy multiple titles while setting the same record
mode for all titles.
To setup, follow steps 1 to 7 in page 99 and then continue
with step 8 below.
8
Select the Rec. Mode on the right-hand side on the
screen using the …†œ √ buttons, then press the
ENTER button.
Copy
DVD-RAM(VR)
No.
Copy To : DVD-RAM(VR) ➞ DVD-RAM(VR)
Title
Rec.Mode
JAN/18/2005 12:15A LP ➞ HS
JAN/19/2005 13:15A SP ➞ LS
JAN/20/2005 15:15A SP ➞ HS
Add a list
1
2
3
MOVE
9
Length
00:10:21
00:15:21
00:30:21
SELECT
Start
Rec. Mode
[DVD]
XP Available
LP
SP 04:00:16
LP 4.48 GB
Total
EP 01:06:03
High Speed
1.88 GB
RETURN
EXIT
Press the …† buttons to select the record mode you
want, then press the ENTER button.
The rest of the copying process can be performed as
described on pages 96 to 97.
Copy
DVD-RAM(VR)
No.
1
2
3
Copy To : DVD-RAM(VR) ➞ DVD-RAM(VR)
Title
Rec.Mode
JAN/18/2005 12:15A LP ➞ HS
JAN/19/2005 13:15A SP ➞ HS
JAN/20/2005 15:15A SP ➞ HS
Add a list
Length
00:10:21
00:15:21
00:30:21
DVD-Dual Layer
Disc
DVD-Single
Layer, DVDVideo, without
Copy Protection
Copy Protected
Disc
Recorded Video
Disc- DVD-RAM
Recorded Video
Disc- DVD-RW
(V Mode)
Recorded Video
Disc- DVD-RW
(VR Mode)
Recorded Video
Disc- DVD-R
DVD-R
DVD-RW
(VR mode)
DVD-RW
(V mode)
DVD-RAM
No
No
No
No
Yes
No
Yes
No
No
No
No
No
No
No
No
Yes
Yes
No
Yes
No
No
Yes
No
No
Yes
No
Yes
No
Yes = Disc copying is possible.
No = Disc copying is not possible.
Protection
Rec. Mode
[ R ] Available
XP 00:59:43
3.80 GB
00:00:16
0.01 GB
SELECT
Recorder tray
Player tray
Start
[ P ] Total
MOVE
Disc Copy Specifications
RETURN
EXIT
This TWIN TRAY DVD RECORDER can allow you to
protect the contents of your discs, as described below.
• Title Protection : See page 83 “Locking(Protecting) a
Title”
• Disc Protection : See page 104 “Disc Protection”
Editing
• Cartridge protection : See page 6.
Disc copy will operate only if these protection is
cleared.
102 - English
1
Press the RECORDER button on the front panel or R
button on the remote control.
2
Press the OPEN/CLOSE button and insert a
recordable disc in the R tray, then press the PLAYER
button on the front panel or P button on the remote
control.
3
Press the OPEN/CLOSE button and insert a
non-copy protected disc that you want to copy into
the P tray.
00627D-DVD-TR520_XAA_99-108
2005.7.27
5:21 AM
4
Press the OPEN/CLOSE button to close the disc
tray. Wait until LOAD disappears from the front panel
display and check that the recordable disc is in the R
Tray.
5
With the unit in Stop mode/Playback mode, press the
DIRECT COPY button.
The “Do you want to start the Disc Copy?” message
is displayed.
Page 103
■
NOTE
■
■
Caution
■
MP3/JPEG/DivX file copy is not supported.
This unit can not open the P tray and the
R tray simultaneously.
DVD-R discs are write-once media.
Canceling in the middle of the writing
process will make the DVD-R unusable.
For DVD-RAM/RW discs, canceling in the middle
of the writing process will erase the file which
had been copied to the DVD-RAM/-RW disc.
Title List
DVD-RAM(VR)
No.
Title
No.
Rec.Mode
Title
Length
Length
JAN/18/2005 12:15A LP ➞ HS 00:10:21
Start
Do you
want LP
to ➞start
Disc Copy?Rec. Mode
JAN/19/2005
13:15A
HS the
00:15:21
1
2
3
JAN/20/2005
15:15A LP ➞ ➞
HS R:DVD-RW(VR)
00:30:21
P:DVD-RW(VR)
[DVD] Available
Add a list
LP 04:00:16
4.48 GB
Yes
No
Total
01:06:03
1.88 GB
MOVE
6
SELECT
RETURN
Disc Manager
EXIT
To perform Disc Copy, press the œ √ buttons to select
Yes, then the “All data Recorder Tray’s Disc will be
deleted. Do you want to continue? message is
displayed.
Disc manager functions are only available when a disc
is inserted in the R tray.
Title List
DVD-RAM(VR)
No.
1
2
3
Title
No.
Rec.Mode
Title
JAN/18/2005 12:15A LP ➞ HS 00:10:21
Start
All data in13:15A
Recorder
will be deleted.
JAN/19/2005
LP Tray’s
➞ HS Disc
00:15:21
Rec. Mode
JAN/20/2005 15:15A
➞ HSto continue?
00:30:21
Do you LP
want
[DVD] Available
Add a list
LP 04:00:16
Yes
Editing the Disc Name
Length
Length
Follow these instructions to give a name to a disc.
4.48 GB
No
Total
01:06:03
1.88 GB
MOVE
7
SELECT
RETURN
EXIT
To begin Disc Copy, press the œ √ buttons to select
Yes, then the Copy screen is displayed.
1
With the unit in Stop mode / playback mode, press
the ANYKEY button.
Search
Scene Navigation
Time Navigation
Marker
Rec. Mode
√
Select Tray
√
DVD
1%
Editing
Disc Manager
DVD
If you want to stop copy, press CANCEL key.
• To cancel the copying in progress, press the
CANCEL button.
• Press the INFO button to disappear the copy
processing bar.
2
Press the …† buttons to select Disc Manager, then
press the ENTER or √ button.
Disc Manager
DVD-RAM(VR)
Disc Name
The Disc is successfully copied.
Used Space
00 : 04 : 30
Available Space
02 : 08 SP
Disc Protection Info
Not Protected
Disc Cartridge Info
Not Protected
Rename
Protection
MOVE
Delete All
SELECT
Format
RETURN
EXIT
English - 103
00627D-DVD-TR520_XAA_99-108
3
2005.7.26
9:50 AM
Press the œ √ buttons to select Rename, then press
the ENTER button.
The Rename screen is displayed.
Page 104
Disc Protection
Disc Protection allows you to protect your discs from being
formatted(erased) or deleted due to unintended operations.
Rename
DVD-RAM(VR)
1
Back Space
Space Delete
MOVE
SELECT
Clear
RETURN
With the unit in Stop mode / playback mode,
press the ANYKEY button.
Save
EXIT
Search
Scene Navigation
Time Navigation
4
Marker
Select the desired characters using the …† œ √
buttons, then press the ENTER button.
Rec. Mode
√
Select Tray
√
Disc Manager
Rename
DVD-RAM(VR)
Disc
2
Back Space
Space Delete
MOVE
SELECT
Clear
RETURN
Press the …† buttons to select Disc Manager, then
press the ENTER or √ button.
Save
EXIT
Disc Manager
DVD-RAM(VR)
Disc Name
5
Press the …† œ √ buttons to select Save,
then press the ENTER button.
A disc name is given to the disc.
Used Space
00 : 04 : 30
Available Space
02 : 08 SP
Disc Protection Info
Not Protected
Disc Cartridge Info
Not Protected
Rename
Protection
MOVE
Delete All
SELECT
RETURN
Format
EXIT
Disc Manager
DVD-RAM(VR)
Disc Name
Disc
Used Space
00 : 04 : 30
Available Space
02 : 08 SP
Disc Protection Info
Not Protected
Disc Cartridge Info
Not Protected
Rename
Protection
3
Delete All
Press the œ √ buttons to select Protection, then press
the ENTER button.
Disc Manager
Format
DVD-RAM(VR)
MOVE
SELECT
RETURN
EXIT
Disc Name
Editing
Used Space
Available Space
00 : 11 : 56
Disc Protection:
00 : 11 : 56 SP
On
Disc Protection Info
Rename
■
You may need to clear the disc protection
before beginning editing.
■
Depending on the disc type, the displayed
screen may be different.
NOTE
■
You may need to clear cartridge protection
(DVD-RAM) or unlock the protect before
beginning editing.
Delete All
SELECT
RETURN
Format
EXIT
Press the œ √ buttons to select On, then press the
ENTER button.
■
NOTE
104 - English
Protection
MOVE
4
Off
Not Protected
Disc Protection will operate only if
cartridge protect is cleared.
00627D-DVD-TR520_XAA_99-108
2005.7.26
9:50 AM
Page 105
DVD-RW
• You will be prompted with the confirmation
message “Choose the recording format for
DVD- RW.”
Formatting a Disc
Use these instructions to format (erase) a disc. The
cartridge write protect tab should be set to the
unprotect position. The disc protect should also be
cleared.
Disc Manager
DVD-RAM(VR)
Disc Name
Used Space
00 : 10 : 32
Available Space
01 : 29 SP
Choose the recording format for DVD-RW.
Disc Protection Info Not Protected
Current Rec. ModeDVD-VR
VR-Mode
DVD-V
Rename
1
Protection
With the unit in Stop mode / playback mode, press
the ANYKEY button.
Scene Navigation
Time Navigation
Finalize
SELECT
Format
RETURN
EXIT
Press the œ √ buttons to select Yes, then press the
ENTER button. The disc is formatted.
4
Search
Delete All
MOVE
Marker
Rec. Mode
√
Select Tray
√
DVD-VR
DVD-RAM
DVD-RW
Disc Manager
DISC
2
Press the …† buttons to select Disc Manager, then
press the ENTER or √ button.
DVD-V
DVD-RW
DVD-R
DVD-VR and DVD-V are defined according to their
recording format.
Disc Manager
DVD-RAM(VR)
Disc Name
Used Space
00 : 04 : 30
Available Space
02 : 08 SP
Disc Protection Info
Not Protected
Disc Cartridge Info
Not Protected
■
NOTE
Rename
Protection
MOVE
3
Delete All
SELECT
RETURN
Format
Discs created in DVD-VR mode can only
be played in DVD recorders.
Discs created in DVD-V mode can be
played on all standard DVD players.
EXIT
Delete All Title Lists
Press the œ √ buttons to select Format, then press the
ENTER button.
Disc Manager
DVD-RAM(VR)
00 : 10 : 32
Available Space
054 : 20 SP
1
Do you want to format this disc?
[Music/Photo Partition]
Used Space
0006MB
Available Space
Yes
No
10034MB
Delete All
MOVE
With the unit in Stop mode / playback mode, press
the ANYKEY button.
SELECT
RETURN
Format
EXIT
Search
Scene Navigation
DVD-RAM
• You will be prompted with the confirmation
message “Do you want to format this disc?”.
• If you select Yes, you will be prompted with the
confirmation message “All data will be deleted.
Do you want to continue?”.
Time Navigation
Marker
Rec. Mode
√
Select Tray
√
Disc Manager
English - 105
Editing
[Title Partition]
Used Space
00627D-DVD-TR520_XAA_99-108
2
2005.7.26
9:50 AM
Page 106
Press the …† buttons to select Disc Manager, then
press the ENTER or √ button.
Disc Manager
Finalizing a Disc
After you record titles onto a DVD-RW/DVD-R disc with
your TWIN TRAY DVD RECORDER, the disc needs to
be finalized before it can be played back on external
devices.
DVD-RAM(VR)
Disc Name
Used Space
00 : 11 : 56
Available Space
01 : 06 SP
Disc Protection Info
Not Protected
Disc Cartridge Info
Not Protected
Rename
Protection
MOVE
3
Delete All
SELECT
RETURN
Format
EXIT
1
Press the œ √ buttons to select Delete All, then press
the ENTER button.
• You will be prompted with the confirmation message
“Do you want to delete all title lists?”.
Press the RECORDER button on the front panel or R
button on the remote control.
With the unit in Stop mode, press the ANYKEY
button.
Search
Scene Navigation
Time Navigation
Marker
Rec. Mode
√
Select Tray
√
Disc Manager
Disc Manager
DVD-RAM(VR)
Disc Name
00 : 11 : 56
Used Space
Do you want to00delete
allSPtitle lists?
: 11 : 56
Available Space
Yes
Disc Protection Info
Rename
No
Not Protected
Protection
MOVE
Delete All
SELECT
RETURN
Format
2
Press the …† buttons to select Disc Manager, then
press the ENTER or √ button.
EXIT
Disc Manager
DVD-RW(VR)
Disc Name
• When a Protected Entry exists: The Delete All Title
List function will not operate.
If you want to delete a protected entry, disable Protect
for it on the Lock item.
Used Space
00 : 10 : 32
Available Space
02:08 SP
Disc Protection Info Not Protected
Current Rec. Mode VR-Mode
Rename
Protection
Delete All
Editing
• Disc Protection: When Disc Protection or Cartridge
Protection has been set, data cannot be deleted from
a disc.
4
Press the œ √ buttons to select Yes, then press the
ENTER button.
All title lists are deleted.
MOVE
3
Finalize
SELECT
Format
RETURN
EXIT
Press the …† œ √ buttons to select Finalize, then
press the ENTER button.
You will be prompted with the message “Do you want to
finalize disc?”.
Disc Manager
DVD-RW0VR)
Disc Name
00 : 10 : 32
Used Space
Available Space
01 : 06 SP
Do you want to finalize disc?
Disc Protection Info Not Protected
Current Rec. Mode Yes
VR-Mode
No
Rename
Protection
Delete All
MOVE
106 - English
Finalize
SELECT
Format
RETURN
EXIT
00627D-DVD-TR520_XAA_99-108
2005.7.26
9:50 AM
Page 107
If you select Yes, you will be prompted again with the
message “Disc will be finalized. Do you want to
continue?”.
Unfinalizing a Disc (V/VR mode)
Disc Manager
DVD-RW(VR)
Disc Name
Used Space
00 : 10 : 32
Available Space
01 : 29 SP
To add additional titles to a finalized disc, you must first
unfinalize it.
Disc will be finalized.
Do you want to continue?
Disc Protection Info Not Protected
Current Rec. Mode Yes
VR-Mode
No
Rename
Protection
Delete All
MOVE
4
Finalize
SELECT
Format
RETURN
EXIT
1
Press the œ √ buttons to select Yes, then press the
ENTER button.
The disc is finalized.
Press the RECORDER button on the front panel or R
button on the remote control.
With the unit in Stop mode, press the ANYKEY
button.
Search
Scene Navigation
Time Navigation
Marker
■
Once a disc is finalized, you cannot delete
entries from the record list.
■
After being finalized, the DVD-R/DVDRW(video mode) operates in the same
manner as a DVD-Video.
NOTE
■
Depending on the disc type, the displayed
screen may be different.
■
Finalizing time may be different depending
on the amount of data recorded on the
disc.
■
Data on the disc will be damaged if the
TWIN TRAY DVD RECORDER is powered
off during finalize process.
■
When the disc contains a music or JPEG
files, you cannot finalize the disc.
2
Select Tray
√
Disc Manager
√
Press the …† buttons to select Disc Manager, then
press the ENTER or √ button.
Disc Manager
DVD-RW(VR:F)
Disc Name
Used Space
00 : 00 : 00
Available Space
00 : 00 SP
Current Rec. Mode DVD-VR
unfinalize
MOVE
3
SELECT
RETURN
Format
EXIT
Disc Manager
DVD-RW(VR:F)
Disc Name
Used Space
00 : 00 : 00
Available Space
00 : 00 SP
Do you want to unfinalize disc?
Current Rec. Mode DVD-V
Yes
No
unfinalize
MOVE
SELECT
RETURN
Format
EXIT
English - 107
Editing
Press the œ √ buttons to select Unfinalize, then
press the ENTER button.
You will be prompted with the message “Do you want
to unfinalize disc?”.
00627D-DVD-TR520_XAA_99-108
2005.7.26
9:50 AM
If you select Yes, you will be prompted again with the
message “Disc will be unfinalized. Do you want to
continue?”.
Disc Manager
DVD-RW(VR:F)
Disc Name
00 : 00 : 00
Used Space
Available Space
00 : 00 SP
Disc will be unfinalized.
Do you want to continue?
Current Rec. Mode DVD-V
Yes
No
unfinalize
MOVE
4
SELECT
Format
RETURN
EXIT
Press the œ √ buttons to select Yes, then press the
ENTER button.
The disc is unfinalized.
■
NOTE
A DVD-RW can be finalized or unfinalized
in Video mode.
Unfinalize
DVD-RW(V)
Additional recording, protection
Operation Same as DVD-Video
and deletion are possible.
Mark
A DVD-RW can be finalized or unfinalized
in VR mode.
Finalize
Unfinalize
Mark
DVD-RW(VR:F)
DVD-RW(VR)
Operation
Additional recording,
deletion, editing, and
protection are impossible.
Additional recording,
deletion, editing, and
protection are possible.
Editing
■
Finalize
DVD-Video(RW)
108 - English
Page 108
00627D-DVD-TR520_XAA_109-114
2005.7.26
12:49 PM
Reference
Page 109
Troubleshooting
If your product malfunctions, go through the
checkpoints below before contacting a Samsung
authorized service center.
Power
The input is displayed for a while when the
power is turned on.
Checkpoint 1
The TWIN TRAY DVD RECORDER
requires some time to initialize and the
input will be displayed for approx. 10
seconds after it is turned on.
Recording
Cannot record TV programs.
Checkpoint 1
Check whether the power cord is
securely plugged into the power outlet.
Checkpoint 2
Did you set the TWIN TRAY DVD
RECORDER channel settings
correctly?
Checkpoint 3
Check the free space on your DVDRAM/DVD-RW/DVD-R discs.
Checkpoint 4
Is the DVD-RAM Cartridge protected?
I pressed the REC button but there is no response.
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . .109
Recording is possible for DVDRAM/DVD-RW/DVD-R discs only. If a
program is copy protected, it cannot
be recorded.
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
English - 109
Reference
Checkpoint 1
00627D-DVD-TR520_XAA_109-114
2005.7.26
12:49 PM
Page 110
Playback
Cannot play the disc.
Checkpoint 1
Checkpoint 2
Checkpoint 3
Check whether the disc is inserted
correctly with the label facing up.
You cannot use this operation or
function due to one of the following
reasons:
(1) Your DVD disc restricts it.
(2) Your DVD disc does not support
this feature (for example: angles)
(3) The feature is not available at the
moment.
(4) You've requested a title, chapter, or
scan time that is out of range.
Reference
The disc does not support all selected
functions. In this case, some settings
configured in the settings menu may
not work properly.
Cannot change the aspect ratio.
Checkpoint 1
The angle operation is available only
when the disc contains images
captured from different angles.
This TWIN TRAY DVD RECORDER
cannot play some types of discs. (See
page 6.)
Play mode settings are different from the settings
configured in the Settings menu.
Checkpoint 1
Checkpoint 1
Check the regional code of the DVD
disc.
icon appears on the screen.
Checkpoint 1
The angle operation does not work while
playing a DVD disc.
The aspect ratio is fixed for some DVD
discs. (See page 38.)
110 - English
The selected audio and/or subtitle language is
not played.
Checkpoint 1
Audio and subtitle languages are
disc-specific. Only the sound and
subtitle languages contained on
the DVD disc are available and
displayed in the disc menu.
00627D-DVD-TR520_XAA_109-114
2005.7.26
12:49 PM
Video
Timer Recording
The disc revolves, but no image or bad quality
images are displayed.
Checkpoint 1
Check whether there is damage to or
any foreign material on your disc.
Checkpoint 2
Some low quality discs may not play
properly.
Checkpoint 3
Page 111
Timer lamp flickers.
Checkpoint 1
Check there is enough space in the
disc for recording.
Checkpoint 2
Check whether the current disc is
recordable or not.
Make sure to check before the start
time of recording.
If scenes change from dark to bright
suddenly, the screen may shake
vertically temporarily, but this is not a
fault.
Timer recording does not work properly.
Sound
No sound.
Checkpoint 1
Are you watching a program in slow
or skip mode?
If you are playing a program at a
speed other than normal speed,
sound will not be heard.
Checkpoint 2
Check the connections and settings.
Checkpoint 3
Checkpoint 4
Checkpoint 1
Re-check the recording time and the
end time settings again.
Checkpoint 2
Recording will be canceled if the
power is interrupted due to a power
failure or another similar reason
while recording.
Check whether the disc is damaged.
Clean the disc, if necessary.
Check whether the disc is inserted
correctly with the label facing up.
No audio output.
Reference
Checkpoint 1
Check whether you have selected
the correct digital output options in
the Audio Output Options menu.
(See page 36.)
English - 111
00627D-DVD-TR520_XAA_109-114
2005.7.26
12:49 PM
Remote Control Unit
Page 112
Other problems.
The remote control doesn't work.
Checkpoint 1
Point the remote control at the remote
control sensor on your TWIN TRAY
DVD RECORDER. Allow for proper
distance. Remove obstacles between
your TWIN TRAY DVD RECORDER
and the remote control.
Checkpoint 2
Check the batteries.
Checkpoint 3
Check for the DVD/TV selection
button.
Other
I forgot my password for parental supervision.
Checkpoint 1
Press the ( √√ ) buttons on your
TWIN TRAY DVD RECORDER
simultaneously when the power is on.
All settings including the password will
revert to the factory settings. Do not
use this unless absolutely necessary.
(Note that this function is possible only
when no disc is inserted.)
Reference
Is it possible to change a subtitle and an audio
signal on a recorded disc?
Checkpoint 1
A recorded disc is played with only
the subtitle and the audio signal
which were selected during recording.
112 - English
Checkpoint 1
Read the table of contents and then
find and read the section describing
your problem, and follow the
instructions given.
Checkpoint 2
Turn your TWIN TRAY DVD
RECORDER off and on.
Checkpoint 3
If the problem still persists, contact a
nearby Samsung service center or
call 1-800-SAMSUNG to arrange
service.
00627D-DVD-TR520_XAA_109-114
2005.7.26
12:49 PM
Page 113
Specifications
General
Power requirements
120V AC, 60Hz
Power consumption
40 Watts
Weight
10.47 lb
Dimensions
16.9in(W) x 12.52in(D) x 3.11in(H)
Operating temp.
+41°F to +95°F
Other conditions
Keep level when operating. Less than 75% operating humidity
1.0 V p-p at 75Ω load, sync negative
Video (1,2)
Input
S-Video input (Y: 1.0Vp-p, C: 0.286Vp-p at 75Ω load)
Audio(1,2)
Max.Audio Input Level : 2Vrms
DV Input
IEEE 1394(4p) compatible jack
Receivable Channels
Regular TV broadcasting: VHF (2~13), UHF (14~69)
Cable TV broadcasting: 1~125
Analog output jacks 1, 2
Audio
Optical/Coaxial digital audio output
Full scale Analog output level : 2Vrms
Video output jack 1
Output
Video
S-Video output 1 (Y:1.0Vp-p, C:0.286Vp-p at 75Ω load)
Component output 1 (Y: 1.0Vp-p, Pb: 0.70Vp-p, Pr: 0.70Vp-p at 75Ω load)
Picture Compression format
MPEG-II
Audio Compression format
Dolby Digital 2ch/256kbps
Recording Quality
XP (about 8.5 Mbps), SP (about 4.5 Mbps), LP (about 2 Mbps),
EP (about 1.6 Mbps or about 1.2 Mbps)
Recording
Audio Frequency Response
20 Hz ~ 20 kHz
Audio Output
For DVD discs, audio signals recorded at 96kHz sampling frequency are converted into and output at 48kHz.
DVD
AUDIO CD(CD-DA)
Analog Audio Output
48 / 96kHz
44.1kHz
Digital Audio Output
48kHz
44.1kHz
English - 113
Reference
Disc Type
00627D-DVD-TR520_XAA_109-114
2005.7.26
12:49 PM
Page 114
Warranty
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC.
(SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by
SAMSUNG against manufacturing defects in materials and workmanship for the following limited warranty
period:
One (1) Year Parts / Ninety (90) Days Labor
This limited warranty begins on the original date of purchase, and is valid only on products purchased and
used in the United States, and does not include transportation, installation, removal or reinstallation. Warranty
repairs must be performed by SAMSUNG’s authorized service center. To receive warranty service, the original
dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG’s
authorized service center. Transportation to and from the service center is the responsibility of the purchaser.
SAMSUNG will repair or replace this product, at our option and at no charge with new or reconditioned parts, if
found to be defective during the limited warranty period specified above. The product must be returned during
the warranty period with transportation charges prepaid to SAMSUNG’s designated service center. Prior to
returning any product for warranty service, the purchaser must contact SAMSUNG for problem determination
and service procedures. SAMSUNG does not warrant uninterrupted or error-free operation of the product.
All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG.
Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is
longer.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal,
noncommercial use of this product and shall not apply to the following, including, but not limited to: damage
which occurs in shipment; applications and uses for which this product was not intended; failures or problems
which are caused by products or equipment not supplied by SAMSUNG; accidents, misuse, abuse, neglect,
misapplication, fire, water, lightning or other acts of nature; incorrect electrical line voltage, fluctuations or
surges; damage caused by improper or faulty installation; improper connection with any peripheral; product
alteration or modification; improper or unauthorized repair; cosmetic damage or exterior finish; product with
altered serial numbers; failure to follow operating instructions, customer adjustments, maintenance and
environmental instructions that are covered and prescribed in the instruction book; use of non-SAMSUNG or
unauthorized parts, supplies, accessories or equipment which damage this product or result in service
problems; failures or problems due to incompatibility with other equipment.
00627D-DVD-TR520_XAA_109-114
2005.7.26
12:49 PM
Page 115
ELECTRONICS
SAMSUNG ELECTRONICS AMERICA, INC.
HEADQUARTERS
105 Challenger Road, Rldgefield Park, N.J.
07660-0511
TEL: 1-800-SAMSUNG
SERVICE DIVISION
400 Valley Road, Suite 201, Mount Arlington, NJ 07856
1-800-SAMSUNG (1-800-726-7864)
www.samsung.com
AK68-00627D-01