Mini Tracker MT-900

Mini Tracker Model:MT-900

USER MANUAL

UniTraQ International Corp. All right reserved, © 2010

2F., No.136, Ziqiang S. Rd., Zhubei City, Hsinchu County 30264, Taiwan (R.O.C.)

TEL：886-3-6578491 FAX：886-3-6578492

MADE IN TAIWAN

UniTraQ International Corp.

RoHS compliance

.

2010,05, Version 1.0

1

Mini Tracker MT-900

1. Introduction ........................................................................................................3

2. Features...............................................................................................................3

3. Applications........................................................................................................4

4. Electrical Specifications..................................................................................4

4.1 General Specification ................................................................................4

4.2 GSM/GPRS Specification .........................................................................5

4.3 GPS Specification ......................................................................................5

5. USB Interface .....................................................................................................6

5.1 Battery Charging ........................................................................................6

5.2 Parameters Setting ....................................................................................6

6. Button/Switch Indication.................................................................................6

Slide switch ........................................................................................................6

Panic Key ............................................................................................................6

7. LED Indication....................................................................................................7

7.1 Power On/Off status...................................................................................7

7.2 GPS Status ...................................................................................................7

7.3 GSM/GPRS Status ......................................................................................7

7.4 Charging Status ..........................................................................................7

8. DEVICE CONFIGURATION ..............................................................................8

8.1 USB driver installation procedure .........................................................8

8.2 Min Tracker Setting description ...........................................................10

8.3 Upgrade Firmware.................................................................................... 11

8.4 Short Message Service Control............................................................12


RoHS compliance

.

2010,05, Version 1.0

2


1. Introduction

The MT-900 is a portable compact tracking device for personal safety and asset monitoring. It combines high sensitivity GPS and quad band GSM/GPRS to perform the powerful security application.

The MT-900 can, based on quad band GSM/GPRS network and GPS satellite positioning system, track far-way objects conveniently by Short Message or internet. It can be used for child protection, anti-kidnapping, vehicle tracking, pets go out tracking, panic assistant for the aged, and much more.

2. Features



Available Quad band GSM/GPRS 850/900/1800/1900 MHz



GPS 50 channels all-in-view tracking.



GPS high sensitivity -159 dBm.



Real time dynamic reporting based on time interval.

 Data logger capability built in with 4Mega bytes flash memory to record time stamp, position and event status.

(option)



3D G-sensor to report motion sensing, accident from ±4G.

(option)



Remote command control by SMS or GPRS network.



Emergency call and notification, plus SMS sending location.



Geo-fence capability with out of fencing notification.



Over speed notification capability.



Low battery notification capability.



Power management for low power consumption.



Surrounding audio monitoring capability.

(option)



Mini USB for charging and data exchanging.



Personal service center program support.



Over the air(OTA) firmware update (option)


RoHS compliance

.

2010,05, Version 1.0

3

3. Applications




Security – safety of security guard, locate asset



Asset unauthorized movement detection



Child care – locate missing kids, track whereabouts of children



Disables’ safety – seniors’ safety



Outdoor recreation – travel, hiking, bike riding



Animal tracking – track pets’ location

4.1 General Specification

Parameter specification

Operating Voltage 3.4 V

Operating Temperature

Storage Temperature

-20 ℃ ~ +60 ℃

-40 ℃ ~ +85 ℃

Power Consumption

Battery

Battery Voltage

SIM card type

LED Status Indicator

Dimension

Weight

Full power 150 mA

Idle mode < 6 mA

600mAh

Min:3.4V, Typ:3.7V, Max:4.2V

1.8V, 3V

Power/ GPRS/GPS

53 x 37 x 20 mm

39g


RoHS compliance

.

2010,05, Version 1.0

4


4.2 GSM/GPRS Specification

Parameter specification

Output power

Protocol support

GPRS Multi-slot

GPRS Mobile station

Coding scheme

Downlink/ Uplink max.

Operating temperature

Storage temperature

Current consumption

850MHz/900MHz/1800MHz/1900MHz

Class 4(2W) for EGSM 850 and 900

Class 1(1W) for GSM 1800 and 1900

TCP/UDP/PPP

Class 10

Class B

CS1,CS2,CS3,CS4

85.6Kbps/42.8 kbps

-20 ℃~ +55 ℃

-40 ℃~+85 ℃

Idle mode: <1.6 mA

GSM : < 300mA

GPRS (2Tx,3Rx power level 10): < 410mA

4.3 GPS Specification

Parameter

Frequency

Channels

Acquisition sensitivity

Tracking sensitivity

TTFF hot start warm start cold start

Signal Reacquisition

Update Rate

Tracking current

Operating temperature

Datum

Protocol

specification

L1, 1575.42MHz

50 channel all in view

-142dBm

-159dBm

< 1 sec

< 36 sec

< 36 sec

<1s

1Hz (standard)

40mA

-40℃ ~ +85℃

WGS-84(Default)

NMEA-0183 V3.01

Dynamics 4G (39.2m/sec2)


RoHS compliance

.

2010,05, Version 1.0

5


5.1 Battery Charging

1. Charging by a computer USB port:

Connect the supplied USB cable between the computer USB port and the mini USB connector of the MT-900 device.

2. Charging by a cigarette lighter power adapter:

a. Plug the USB connector of the supplied USB cable to the USB connector of the cigarette lighter power adapter. b. Connect the mini USB plug of the USB cable to the mini USB port of the MT-900 device.

3. Charging by AC adapter:

Connect the supplied AC adapter to the mini USB port of the MT-900 device.

5.2 Parameters Setting

Connect the supplied USB cable between the computer USB port and the mini USB connector of the MT-900 device.

The USB interface is also a command and data interface which allows users to download the firmware and set configurations.

Slide switch

Power on/off MT900

Panic Key

Press and hold the Panic key for 3 seconds to activate the device to perform the emergency notification and followed the pre-defined

setting.


RoHS compliance

.

2010,05, Version 1.0

6

7.1 Power On/Off status

LED mode


Operation status

FLASH

7.2 GPS Status

IDEL MODE

For the GPS status indicator through LED, detailed information is shown in the following table

LED mode Operation status

OFF un-fixed

FLASH fixed

7.3 GSM/GPRS Status

For the GPRS/GSM status indicator through LED, detailed the information is shown in the following table.

LED mode

OFF

FLASH

Operation status

GSM/GPRS is not running

Indicates GPRS data transfer:

7.4 Charging Status

LED mode Operation status

ON Charging

OFF Finish


RoHS compliance

.

2010,05, Version 1.0

7


8.1 USB driver installation procedure

Connect MT-900 device to PC, choose “No, not this time”

then click Next button

Choose “install from a list or specific location(Advanced)”, then click Next button


RoHS compliance

.

2010,05, Version 1.0

8


Click the Browser button to search the installation file, then click Next button to install USB driver

Click Finish button to complet


RoHS compliance

.

2010,05, Version 1.0

9


8.2 Min Tracker Setting description

Set TCP IP & Port:

Run Mini Tracker Setting tool software, then it will show the setting environment. Choose

TCP IP & Port Set in commands column. Follow the below picture setting, then click the

“Send command” button, then you will see OK in Result Window.

Set Device ID:

Choose Device ID in Commands column. Follow the below picture setting, then click the

“Send command” button, then you will see OK in Result Window


RoHS compliance

.

2010,05, Version 1.0

10


8.3 Upgrade Firmware

Power on the device. Using USB cable connects the device with PC.

Check if the device access to the PC’s COM port.

My Computer>Properties>Hardware>Device >Manager>Ports (COM&LPT)

Open the Hyper Terminal, and select the corresponding COM.

The baud rate is 115200, 8 data bits, none parity check, 1 stop bit, none flow control.

Input “updmtfm” and Enter in HyperTerminal.

Select the file which to be downloaded via “Transfer” -> “Send File” of the HyperTerminal as the figure.

After all, press the “Send” button to download file from PC.

And then you will see the download progress.


RoHS compliance

.

2010,05, Version 1.0

11


8.4 Short Message Service Control

Introduction

The tracker also provides another way for control access or configuration. From the Short

Message Service, the user can use the defined number mobile phone to control the tracker. After received the SMS, the tracker will perform as the request command and will response to the mobile phone with SMS.

General Rule

Password: pppppp, 6 ~12 alphanumeric characters.

*: Start symbol.

#: End symbol.

ID: Tracker Identification number, 4 ~ 16 alphanumeric characters.

No Space character is allowed, only “,” between the * and #.

RX: receive from mobile phone.

TX: response to mobile phone.

GPS location information: the format will be yy/mm/dd,hh:mm:ss,Elongitude,Nlatitude,Sxxx.x,Cxxx.x

x: 0~9 digital number.

Command Description

Set Tracker ID

Function

Format

Response or

Set up the ID into the tracker.

RX *ID,PPPPPP,setid,new ID,new ID#

TX

TX

New ID Setup OK

Old ID Setup fail

Set Cellular Number

Function Set up the phone number(s) into the tracker.

Format RX *ID,PPPPPP,fonsetup,phone - 1(, phone - 2, phone - 3)#

Response or

TX

TX

ID fonsetup OK

ID fonsetup fail


RoHS compliance

.

2010,05, Version 1.0

12


Set Time Interval

Function Set up the location response time interval into the tracker, the unit is seconds.

Format RX *ID,PPPPPP,tintsetup,xxxxx#

Response or

TX

TX

ID tintsetup OK

ID tintsetup fail

Enable and Set up Geofence

Function Set up the radius of the Geofence into the tracker, the unit is meters.

Format RX *ID,PPPPPP,geofenceon,xxxxx#

Response TX or

Disable Geofence

TX ID geofence on fail

Function Disable the Geofence function of the tracker.

Format RX *ID,PPPPPP,geofenceoff#

Response TX or TX

Set Tracker Password

ID geofence off fail

Function Set up the password into the tracker.

Format RX *ID,PPPPPP,setpass,new password,new password#

Response or

Inquire Current Location

TX

TX

ID setpass OK

ID setpass fail

Function Inquire the location information from the tracker.

Format RX *ID,PPPPPP,gpsinq#

Response TX or TX ID gpsinq fail


RoHS compliance

.

2010,05, Version 1.0

13


Inquire IMEI code

Function Inquire the GSM IMEI code from the tracker.

Format RX *ID,PPPPPP,getimei#

Response or

TX

TX

ID 15 decimal of IMEI

ID getimei fail

Set IP and Port

Function Set up the IP and Port of the server into the tracker.

Format RX *ID,PPPPPP,ippsetup,xxx.xxx.xxx.xxx,xxxxx#

Response TX

TX or

Inquire Battery Voltage

ID IPxxx.xxx.xxx.xxx Portxxxxx

ID ippsetup fail

Function Inquire the battery voltage from the tracker.

Format RX *ID,PPPPPP,batteryinq#

Response or

Set Notification Way

TX

TX

ID battery x.xx

ID battery fail

Function

Format

Select notification from the GPRS or GSM SMS.

RX *ID,PPPPPP,notify,GPRS on/ff,SMS on/off#

Response or

TX

TX

ID notify GPRS on/ff,SMS on/off

ID notify fail

Enable and Set up Over Speed Detection

Function Set up the speed threshold for alarm detection into the tracker, the unit is kilometer.

Format RX

Response or

TX

TX

ID overspeed ON xxx

ID overspeed fail


RoHS compliance

.

2010,05, Version 1.0

14


Disable Over Speed Detection

Function Disable the over speed detection function.

Format RX *ID,PPPPPP,overspeedoff#

Response or

TX

TX

ID overspeed OFF

ID overspeed fail

Enable Unauthorized Movement Detection

Function Activate the movement detection function.

Format RX *ID,PPPPPP,movedeton#

Response TX ID move detection ON or TX ID move detection fail

Disable Unauthorized Movement Detection

Function Disable the movement detection function.

Format RX *ID,PPPPPP,movedetoff#

Response or

Set Idle Time Period

Function

TX

TX

ID move detection OFF

ID move detection fail

Set up the system idle time interval for the tracker to get into the sleep mode, the unit is seconds.

Format RX

Response or

Enable Audio Monitoring

TX

TX

ID tidlesetup OK

ID tidlesetup fail

Function Activate the audio monitoring function.

Format RX *ID,PPPPPP,moniteron#

Response or

TX

TX

ID audio monitor ON

ID audio monitor fail

Disable Audio Monitoring

Function Disable the audio monitoring function.

Format RX *ID,PPPPPP,moniteroff#

Response TX ID audio monitor OFF or TX ID audio monitor fail


RoHS compliance

.

2010,05, Version 1.0

15


UniTraQ International Corp

2F., No.136, Ziqiang S. Rd., Zhubei City, Hsinchu County 30264, Taiwan (R.O.C.)

TEL：886-3-6578491 FAX：886-3-6578492

Email [email protected]

Website www.unitraq.com

© 2010 UniTraQ International Corp. All rights reserved.

Not to be reproduced in whole or part for any purpose without written permission of UniTraQ International

Corp (“UniTraQ”) Information provided by UniTraQ is believed to be accurate and reliable. These materials are provided by UniTraQ as a service to its customers and may be used for informational purposes only. UniTraQ assumes no responsibility for errors or omissions in these materials, nor for its use. UniTraQ reserves the right to change specification at any time without notice.

These materials are provides “as is” without warranty of any kind, either expressed or implied, relating to sale and/or use of UniTraQ products including liability or warranties relating to fitness for a particular purpose, consequential or incidental damages, merchantability, or infringement of any patent, copyright or other intellectual property right. UniTraQ further does not warrant the accuracy or completeness of the information, text, graphics or other items contained within these materials. UniTraQ shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials.

UniTraQ products are not intended for use in medical, life-support devices, or applications involving potential risk of death, personal injury, or severe property damage in case of failure of the product.


RoHS compliance

.

2010,05, Version 1.0

16

Mini Tracker MT-900

Mini Tracker Model:MT-900

USER MANUAL

UniTraQ International Corp. All right reserved, © 2010

Related manuals

UniTraQ International Corp.

MT-900C

UniTraQ

MT-900M