Bosch 19-inch High-resolution LCD Monitor UML-190-90 en Installation Manual UML-190-90 | en iii Table of Contents 1 Safety 1 1.1 Important safety instructions 1 1.2 Safety precautions 2 1.3 Important notices 3 1.4 Customer Support and Service 6 2 Unpacking 7 2.1 Parts List 7 3 Exploded View 8 4 Description 10 4.1 Features 10 4.2 Power 10 5 Installing the UML-190-90 11 5.1 Mounting the UML-190-90 11 5.1.1 Desktop Installation 11 5.1.2 Wall Mount Installation 11 5.2 Connecting the Composite Video Signal to the Monitor 13 5.3 Connecting the Y/C (S-Video) Signal to the Monitor 13 5.4 Connecting the PC Signal to the Monitor 13 5.5 Ventilation 14 5.6 Single / Multiple Monitor Configuration 14 6 Navigating the Monitor 15 6.1 Navigating the Front Panel 15 6.2 Navigating the Monitor On-screen Display (OSD) 16 6.3 On-screen Display Menus 17 6.4 Video Mode 18 6.5 Screen 18 6.6 Audio 19 6.7 OSD 19 6.8 Color (PC mode) 20 6.9 Utility 20 6.10 Exit 21 7 Power Management 22 7.1 Power Consumption 22 7.2 LED Indicator 22 8 Trouble Shooting Guide 23 9 Maintenance 24 10 Technical Specifications 25 Bosch Security Systems, Inc. Installation Manual F01U075712 | 1.0 | 2007.09 iv en | F01U075712 | 1.0 | 2007.09 UML-190-90 Installation Manual Bosch Security Systems, Inc. UML-190-90 Safety | en 1 Safety 1.1 Important safety instructions 1 Read, follow, and retain for future reference all of the following safety instructions. Heed all warnings on the unit and in the operating instructions before operating the unit. 1. Heat Sources - Do not install the unit near any heat sources such as radiators, heaters, stoves, or other equipment (including amplifiers) that produce heat. 2. Ventilation - Any openings in the unit enclosure are provided for ventilation to prevent overheating and ensure reliable operation. Do not block or cover these openings. Do not place the unit in an enclosure unless proper ventilation is provided, or the manufacturer's instructions have been adhered to. 3. Water - Do not use this unit near water, for example near a bathtub, washbowl, sink, laundry basket, in a damp or wet basement, near a swimming pool, in an outdoor installation, or in any area classified as a wet location. To reduce the risk of fire or electrical shock, do not expose this unit to rain or moisture. 4. Object and liquid entry - Never push objects of any kind into this unit through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electrical shock. Never spill liquid of any kind on the unit. Do not place objects filled with liquids, such as vases or cups, on the unit. 5. Lightning - For added protection during a lightning storm, or when leaving this unit unattended and unused for long periods, unplug the unit from the wall outlet and disconnect the cable system. This will prevent damage to the unit from lightning and power line surges. 6. Controls adjustment - Adjust only those controls specified in the operating instructions. Improper adjustment of other controls may cause damage to the unit. Use of controls or adjustments, or performance of procedures other than those specified, may result in hazardous radiation exposure. 7. Overloading - Do not overload outlets and extension cords. This can cause fire or electrical shock. 8. Power cord and plug protection - Protect the plug and power cord from foot traffic, being pinched by items placed upon or against them at electrical outlets, and its exit from the unit. For units intended to operate with 230 VAC, 50 Hz, the input and output power cord must comply with the latest versions of IEC Publication 227 or IEC Publication 245. 9. Power disconnect - Units with or without ON/OFF switches have power supplied to the unit whenever the power cord is inserted into the power source; however, the unit is operational only when the ON/OFF switch is in the ON position. The power cord is the main power disconnect device for switching off the voltage for all units. 10. Power sources - Operate the unit only from the type of power source indicated on the label. Before proceeding, be sure to disconnect the power from the cable to be installed into the unit. – For battery powered units, refer to the operating instructions. – For external power supplied units, use only the recommended or approved power – For limited power source units, this power source must comply with EN60950. – For 24 VAC units, voltage applied to the unit's power input should not exceed ±10%, supplies. Substitutions may damage the unit or cause fire or shock. or 28 VAC. User-supplied wiring must comply with local electrical codes (Class 2 Bosch Security Systems, Inc. Installation Manual F01U075712 | 1.0 | 2007.09 2 en | Safety UML-190-90 power levels). Do not ground the supply at the terminals or at the unit's power supply terminals. – If unsure of the type of power supply to use, contact your dealer or local power company. 11. Servicing - Do not attempt to service this unit yourself. Opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 12. Damage requiring service - Unplug the unit from the main AC power source and refer servicing to qualified service personnel when any damage to the equipment has occurred, such as: – the power supply cord or plug is damaged; – exposure to moisture, water, and/or inclement weather (rain, snow, etc.); – liquid has been spilled in or on the equipment; – an object has fallen into the unit; – unit has been dropped or the unit cabinet is damaged; – unit exhibits a distinct change in performance; – unit does not operate normally when the user correctly follows the operating instructions. 13. Replacement parts - Be sure the service technician uses replacement parts specified by the manufacturer, or that have the same characteristics as the original parts. Unauthorized substitutions may cause fire, electrical shock, or other hazards. 14. Safety check - Safety checks should be performed upon completion of service or repairs to the unit to ensure proper operating condition. 15. Installation - Install in accordance with the manufacturer's instructions and in accordance with applicable local codes. 16. Attachments, changes or modifications - Only use attachments/accessories specified by the manufacturer. Any change or modification of the equipment, not expressly approved by Bosch, could void the warranty or, in the case of an authorization agreement, authority to operate the equipment. 1.2 Safety precautions DANGER! High risk: This symbol indicates an imminently hazardous situation such as “Dangerous Voltage” inside the product. If not avoided, this will result in an electrical shock, serious bodily injury, or death. WARNING! Medium risk: ! Indicates a potentially hazardous situation. If not avoided, this could result in serious bodily injury or death. CAUTION! Medium risk: ! Indicates a potentially hazardous situation. If not avoided, this may result in minor or moderate injury. Alerts the user to important instructions accompanying the unit. F01U075712 | 1.0 | 2007.09 Installation Manual Bosch Security Systems, Inc. UML-190-90 Safety | en 3 CAUTION! Low risk: (without safety alert symbol) Indicates a potentially hazardous situation. if not avoided, this may result in property damage or risk of damage to the unit. NOTICE! i 1.3 This symbol indicates information or a company policy that relates directly or indirectly to the safety of personnel or protection of property. Important notices Accessories - Do not place this unit on an unstable stand, tripod, bracket, or mount. The unit may fall, causing serious injury and/or serious damage to the unit. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer. When a cart is used, use caution and care when moving the cart/apparatus combination to avoid injury from tip-over. Quick stops, excessive force, or uneven surfaces may cause the cart/unit combination to overturn. Mount the unit per the manufacturer's instructions. All-pole power switch - Incorporate an all-pole power switch, with a contact separation of at least 3 mm in each pole, into the electrical installation of the building. If it is needed to open the housing for servicing and/or other activities, use this all-pole switch as the main disconnect device for switching off the voltage to the unit. Coax grounding: – Ground the cable system if connecting an outside cable system to the unit. – Connect outdoor equipment to the unit's inputs only after this unit has had its grounding plug connected to a grounded outlet or its ground terminal is properly connected to a ground source. – Disconnect the unit's input connectors from outdoor equipment before disconnecting the grounding plug or grounding terminal. – Follow proper safety precautions such as grounding for any outdoor device connected to this unit. U.S.A. models only - Section 810 of the National Electrical Code, ANSI/NFPA No.70, provides information regarding proper grounding of the mount and supporting structure, grounding of the coax to a discharge unit, size of grounding conductors, location of discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. Disposal - Your Bosch product was developed and manufactured with high-quality material and components that can be recycled and reused. This symbol means that electronic and electrical appliances, which have reached the end of their working life, must be collected and disposed of separately from household waste material. Separate collecting systems are usually in place for disused electronic and electrical products. Please dispose of these units at an environmentally compatible recycling facility, per European Directive 2002/96/EC. Environmental statement - Bosch has a strong commitment towards the environment. This unit has been designed to respect the environment as much as possible. Electrostatic-sensitive device - Use proper CMOS/MOS-FET handling precautions to avoid electrostatic discharge. NOTE: Wear required grounded wrist straps and observe proper ESD safety precautions when handling the electrostatic-sensitive printed circuit boards. Bosch Security Systems, Inc. Installation Manual F01U075712 | 1.0 | 2007.09 4 en | Safety UML-190-90 Fuse rating - For security protection of the device, the branch circuit protection must be secured with a maximum fuse rating of 16A. This must be in accordance with NEC800 (CEC Section 60). Grounding and polarization - This unit may be equipped with a polarized alternating current line plug (a plug with one blade wider than the other blade). This safety feature allows the plug to fit into the power outlet in only one way. If unable to insert the plug fully into the outlet, contact a locally certified electrician to replace the obsolete outlet. Do not defeat the safety purpose of the polarized plug. Alternately, this unit may be equipped with a 3-pole grounding plug (a plug with a third pin for earth grounding). This safety feature allows the plug to fit into a grounded power outlet only. If unable to insert the plug into the outlet, contact a locally certified electrician to replace the obsolete outlet. Do not defeat the safety purpose of the grounding plug. Moving - Disconnect the power before moving the unit. Move the unit with care. Excessive force or shock may damage the unit and the hard disk drives. Permanently connected equipment - Incorporate a readily accessible disconnect device in the building installation wiring. Pluggable equipment - Install the socket outlet near the equipment so it is easily accessible. Power disconnect - Units have power supplied whenever the power cord is inserted into the power source. The power cord is the main power disconnect for all units. Rack-mount – Ventilation - Do not place this unit in a built-in installation or rack without proper ventilation or adhering to the manufacturer's instructions. The equipment must not exceed its maximum operating temperature requirements. – Mechanical loading - Properly mount the equipment in a rack to prevent a hazardous condition due to uneven mechanical loading. SELV – All the input/output ports are Safety Extra Low Voltage (SELV) circuits. SELV circuits – Because the ISDN circuits are treated like telephone-network voltage, avoid connecting should only be connected to other SELV circuits. the SELV circuit to the Telephone Network Voltage (TNV) circuits. NOTICE! i This is a class A product. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures. FCC & ICES Information (U.S.A. and Canadian Models Only) This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions: – this device may not cause harmful interference, and – this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules and ICES-003 of Industry Canada. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and radiates radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his expense. F01U075712 | 1.0 | 2007.09 Installation Manual Bosch Security Systems, Inc. UML-190-90 Safety | en 5 Intentional or unintentional modifications, not expressly approved by the party responsible for compliance, shall not be made. Any such modifications could void the user's authority to operate the equipment. If necessary, the user should consult the dealer or an experienced radio/television technician for corrective action. The user may find the following booklet, prepared by the Federal Communications Commission, helpful: How to Identify and Resolve Radio-TV Interference Problems. This booklet is available from the U.S. Government Printing Office, Washington, DC 20402, Stock No. 004000-00345-4. Disclaimer Underwriter Laboratories Inc. (“UL”) has not tested the performance or reliability of the security or signaling aspects of this product. UL has only tested fire, shock and/or casualty hazards as outlined in UL's Standard(s) for Safety for Information Technology Equipment, UL 60950-1. UL Certification does not cover the performance or reliability of the security or signaling aspects of this product. UL MAKES NO REPRESENTATIONS, WARRANTIES, OR CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING-RELATED FUNCTIONS OF THIS PRODUCT. Copyright This user guide is the intellectual property of Bosch Security Systems and is protected by copyright. All rights reserved. Trademarks All hardware and software product names used in this document are likely to be registered trademarks and must be treated accordingly. NOTICE! This user guide has been compiled with great care and the information it contains has been thoroughly verified. The text i was complete and correct at the time of printing. The ongoing development of the products may mean that the content of the user guide can change without notice. Bosch Security Systems accepts no liability for damage resulting directly or indirectly from faults, incompleteness or discrepancies between the user guide and the product described. More information For additional information, please contact the Bosch Security Systems location nearest you or visit our web site at www.boschsecuritysystems.com Bosch Security Systems, Inc. Installation Manual F01U075712 | 1.0 | 2007.09 6 1.4 en | Safety UML-190-90 Customer Support and Service If this unit needs service, contact the nearest Bosch Security Systems Service Center for authorization to return and shipping instructions. Service Centers USA Telephone: 800-366-2283 or 585-340-4162 Fax: 800-366-1329 Email: email@example.com Customer Service Telephone: 800-289-0096 Fax: 585-223-9180 Email: firstname.lastname@example.org Technical Support Telephone: 800-289-0096 Fax: 585-223-3508 or 717-735-6560 Email: email@example.com Repair Center Telephone: 585-421-4220 Fax: 585-223-9180 or 717-735-6561 Email: firstname.lastname@example.org Canada Telephone: 514-738-2434 Fax: 514-738-8480 Europe, Middle East & Asia Pacific Region Telephone: 44 (0) 1495 274558 Fax: 44 (0) 1495 274280 Email: email@example.com More information For additional information, please contact your Bosch Security Systems representative or visit our web site at www.boschsecurity.com F01U075712 | 1.0 | 2007.09 Installation Manual Bosch Security Systems, Inc. UML-190-90 2 Unpacking | en 7 Unpacking This equipment should be unpacked and handled with care. If an item appears to have been damaged in shipment, notify the shipper immediately. Verify that all the parts listed in the Parts List below are included. If any items are missing, notify your Bosch Security Systems Sales or Customer Service Representative. The original packing carton is the safest container in which to transport the unit and must be used if returning the unit for service. Save it for possible future use. 2.1 Parts List The following table lists the parts included: Quantity Part 1 UML-190-90 Color LCD Flat Panel Monitor 1 Installation manual 2 Power Cords, 3-wire with grounded plug 1.8 m (6 ft) long: one with a U.S plug type and one with a European Continental plug type 1 VGA to VGA (D-SUB) cable, 1.5 m (5 ft) 1 Power Supply (brick) 12 V, 4.1 VA, 100-240 VAC; 50/60 Hz Bosch Security Systems, Inc. Installation Manual F01U075712 | 1.0 | 2007.09 UML-190-90 3 Exploded View | en 8 Exploded View Fig. 3.1 Front Panel UML-190-90 Reference # Button Description 1 Input Button Selects the signal to be displayed 2 Menu Button Selects the on-screen display (OSD) 3 Adjusts the value when in Scrolls up in the OSD the OSD 4 Adjusts the value when in Scrolls down in the OSD the OSD or auto adjusts when in PC mode 5 Decreases the value when in Scrolls left in the OSD the OSD 6 Increases the value when in Scrolls right in the OSD the OSD 7 Not Used. 8 Power Button / LED Display power (On/Off) Indicator Power On (green) Standby, suspend, active Off (amber) Unsupported mode (green) Power Off (red) Bosch Security Systems, Inc. Installation Manual F01U075712 | 1.0 | 2007.09 9 en | Exploded View UML-190-90 Fig. 3.2 Bottom Panel UML-190-90 Reference # Connector Description 1 DC 12 V IN 4.1 VA 2 D-SUB IN PC Signal Input 3 VIDEO 1 (AV1) IN Composite signal Input for AV1 4 VIDEO 1 (AV1) OUT Video looping output for AV1 5 VIDEO 2 (AV2) IN Composite signal Input for AV2 6 VIDEO 2 (AV2) OUT Video looping output for AV2 7 S-VIDEO (Y/C) IN Y/C separated signal input 8 S-VIDEO (Y/C) OUT Y/C separated signal looping output F01U075712 | 1.0 | 2007.09 Installation Manual Bosch Security Systems, Inc. UML-190-90 4 Description | en 10 Description The UML-190-90 19-inch (48-cm) Color Panel Display Monitor displays PAL or NTSC standard color pictures in CCTV systems. The UML-190-90 monitor includes two (2) looping Composite Video BNC connector inputs, and one (1) looping Y/C (S-Video) input using a 4-pin mini-DIN. In addition, this model works with a VGA signal. Monitor control functions are accessed via the front panel push buttons and the multi-language On-screen Display (OSD). See Figure 3.1 on page 8 for front panel descriptions. 4.1 Features This high-performance, 19-inch Color Panel Display Monitor with 1280 X 1024 pixels resolution has been designed to display Analog VGA and Composite Video signals. 4.2 – 90 to 264 VAC Power Supply – NTSC/PAL Auto-Detect – 1280 x 1024 High-Resolution Display – VGA Input – Composite Video Input – Y/C Input (S-Video) – On-screen Display (OSD) with Multiple Languages Power Model No. Rated Voltage Voltage Range Power at Rated Voltage Sync Format UML-190-90 120/230 VAC 90 to 264 V 45 W (max) NTSC/PAL 50/60 Hz Bosch Security Systems, Inc. Installation Manual F01U075712 | 1.0 | 2007.09 11 en | Installing the UML-190-90 5 UML-190-90 Installing the UML-190-90 This chapter outlines the procedures needed to install the UML-190-90 Series. A qualified service person should install the monitor and adhere to all local codes. 5.1 Mounting the UML-190-90 The UML-190-90 is designed to be used on a desktop or mounted to a wall or rack. 5.1.1 Desktop Installation The UML-190-90 monitor is delivered with a 3-pole US-style power cord and a 3-pole Eurostyle power cord. Use the US-style power cord where 120 VAC, 60 Hz power is available; and use the Euro-style power cord where 230 VAC, 50 Hz power is available. The monitor automatically adjusts to either power input voltage. 5.1.2 Wall Mount Installation The square mounting holes (100 mm (3.9 in.) centers) can be used with wall mount brackets UMM-LW-20B fixed or UMM-LW-30B swivel/tilt. To install the wall mount, do the following: 1. Remove the UML-190-90 base from the LCD panel section by unscrewing the four (4) holding screws before separating the base from the panel. Fig. 5.1 Removing the Base i NOTICE! Save screws for future use. 2. Mount the unit to the mounting device (not provided) using the four (4) mounting holes on the rear panel. The square mounting hole patterns are standard on 100 mm (3.9 in.) centers. F01U075712 | 1.0 | 2007.09 Installation Manual Bosch Security Systems, Inc. UML-190-90 Installing the UML-190-90 | en 12 Fig. 5.2 Mounting the Device Bosch Security Systems, Inc. Installation Manual F01U075712 | 1.0 | 2007.09 13 en | Installing the UML-190-90 5.2 UML-190-90 Connecting the Composite Video Signal to the Monitor There are two (2) BNC connectors located on the rear of the monitor for composite video input and two (2) BNC connectors for composite video outputs (see Figure 3.2 on page 9). NOTE: All video inputs are active loop-through. The impedance is automatically set to 75 ohm by the input of the signal on the input connector, while operating in a single connection mode (see Figure 5.5 on page 14). If a cable is also connected to the output connector, the video signal can be passed on to another monitor connected to it via the active loop-through function. Up to three (3) monitors may be connected in this manner (see Figure 5.6 on page 14). i 5.3 NOTICE! To select between AV1 and AVI, press Input (Figure 3.1 on page 8, Item 1) located on the front of the monitor. Connecting the Y/C (S-Video) Signal to the Monitor There is one (1) mini-DIN type connector for the S-Video (Y/C) input (see Figure 5.3 on page 13). NOTE: Both Y and C inputs are terminated with 75 ohm. Fig. 5.3 Y/C Connection Pinout 5.4 Reference Input 1 GND 2 GND 3 Y-signal IN or OUT 4 C-signal IN or OUT Connecting the PC Signal to the Monitor The monitor can be connected to the analog VGA signal by using the provided VGA cable (DSUB to D-SUB). Fig. 5.4 VGA Input F01U075712 | 1.0 | 2007.09 Installation Manual Bosch Security Systems, Inc. UML-190-90 5.5 Installing the UML-190-90 | en 14 Ventilation To prevent overheating, ensure that the ventilation openings on the rear of the monitor are not covered. 5.6 Single / Multiple Monitor Configuration Fig. 5.5 Single Monitor Configuration Reference # 1 Description Video Camera 2 VIDEO 1 (AV1) IN 3 VIDEO 1 (AV1) OUT 4 VCR Fig. 5.6 Multiple Monitor Configuration Reference # Description 1 Video Camera 2 VIDEO 1 (AV1) IN 3 VIDEO 1 (AV1) OUT Bosch Security Systems, Inc. Installation Manual F01U075712 | 1.0 | 2007.09 15 en | Navigating the Monitor UML-190-90 6 Navigating the Monitor 6.1 Navigating the Front Panel Use the front panel to make any necessary OSD adjustments to the UML-190-90. See the figure below for an explanation of the front panel. Fig. 6.1 Front Panel Buttons Reference Button Description 1 Input Button Selects the signal to be displayed. Choices are: PC, AV1, AV2, or S-Video. 2 Menu Button 3 Selects the on-screen display (OSD) Adjusts the value when in Scrolls up in the OSD OSD 4 Adjusts the value when in Scrolls down in the OSD OSD or auto adjusts when in PC mode Decreases the value when Scrolls left in the OSD 5 in OSD 6 Increases the value when Scrolls right in the OSD in OSD 7 Not Used. 8 Power Button / LED Power On (green) Indicator Standby, suspend, active off (amber) Unsupported mode (green) Power Off (red) F01U075712 | 1.0 | 2007.09 Installation Manual Bosch Security Systems, Inc. UML-190-90 6.2 Navigating the Monitor | en 16 Navigating the Monitor On-screen Display (OSD) The UML-190-90 has two (2) modes, Video and VGA. The UML-190-90 is programmed through the on-screen display (OSD) menus. Each on-screen display (OSD) shows a list of parameters or submenus that can be selected by the operator. To access the OSD menus, press the Menu button. Use the front panel of the UML-190-90 to make any necessary adjustments to the OSD. To navigate the set up menus, follow the steps below: 1. Connect the CVBS or VGA cable. 2. If required, press the Input button until a signal is displayed. NOTE: Menus are not available without a signal applied. 3. Power on the unit by pressing the power button (see Figure 6.1 on page 15). 4. Press the Menu button to activate the main menu selections (see Figure 6.1 on page 15). 5. Press the 6. Press the Menu button to enter into the selected main menu. 7. Press the and and buttons to navigate in selecting a main menu. button to toggle the OSD values. When finished, scroll to Exit and press the Menu button. NOTE: If there is no Exit button, press the Menu button. Bosch Security Systems, Inc. Installation Manual F01U075712 | 1.0 | 2007.09 17 6.3 en | Navigating the Monitor UML-190-90 On-screen Display Menus There are seven (7) on-screen menus that allow you to customize your settings. Press the Menu button to access the OSD menu. Icon Menu Function Input Source Enables or disables the input selections. Selects the video source. Choices are: PC, AV1, AV2, or SVideo. Screen Adjusts the Brightness, Contrast, Saturation, Hue, and the Sharpness level for video performance of the OSD. Audio Not available. OSD (on-screen display) Adjusts the H. Position, V. Position, Transparency, OSD Timer, and Language. Language choices are: English, French, German, Italian, Dutch, and Spanish. Color (PC mode) Adjusts the color temperature to 9300, 6500, and user (factory default is 9300). Not available. Utility Enables the user to reset all settings to the factory default values and allows the user to lock or unlock the control key. Exit Enables the user to turn on and off the OSD menu, and displays the following information: horizontal frequency, vertical frequency, and the firmware version number. F01U075712 | 1.0 | 2007.09 Installation Manual Bosch Security Systems, Inc. UML-190-90 6.4 Navigating the Monitor | en 18 Video Mode To access the Input Source, press the Menu button on the front panel of the monitor, then press the arrows to select the Input Source submenu. Input Source Move: EXIT: MENU Fig. 6.2 Input Source Menu 6.5 Screen To access the Screen, press the Menu button on the front panel of the monitor, then press the left and right arrows to select the Screen icon. Press the up and down arrows to select the Screen submenu. Screen Brightness Contrast Saturation Hue Sharpness Move: EXIT: MENU Fig. 6.3 Screen Menu (Video Mode) Screen Brightness Contrast H. Position V. Position Clock Phase Move: EXIT: MENU Fig. 6.4 Screen Menu (PC Mode) Bosch Security Systems, Inc. Installation Manual F01U075712 | 1.0 | 2007.09 19 en | Navigating the Monitor UML-190-90 Submenu Definition Brightness Adjusts the brightness level for video performance (range 0-100%). Contrast Adjusts the contrast level for video performance (range 0-100%). Saturation Adjusts the saturation level for video performance (range 0-100%). Hue Adjusts the overall intensity of the screen (range 0-100%). Sharpness Adjusts the sharpness level for video performance (range 0-100%). H. Position (PC mode) Adjusts the horizontal position for the desktop (range 0-100%). V. Position (PC mode) Adjusts the vertical position for the desktop (range 0-100%). Clock Adjusts the best picture quality by adjusting the horizontal size of the video displayed (range 0-100%). Phase Adjusts for best picture quality by adjusting for sharpness of vertical lines (range 0-100%). 6.6 Audio Not available on this monitor. 6.7 OSD To access the OSD, press the Menu button on the front panel of the monitor, then press the left and right arrows to select the OSD icon. Press the up and down arrows to select the OSD submenu. OSD H. Position V. Position Transparency OSD Timer Language Move: EXIT: MENU Fig. 6.5 OSD Menu Submenu Definition H. Position Adjusts the horizontal position for the OSD menu (range 0-100%). V. Position Adjusts the vertical position for the OSD menu (range 0-100%). Transparency Adjusts the transparency level for video performance (0, 25, 50, and 100% increments). OSD Timer Adjusts the on-screen display time (range 5s-20s). Language Adjusts the language of the OSD. Choices are: English, French, German, Italian, Dutch, and Spanish. F01U075712 | 1.0 | 2007.09 Installation Manual Bosch Security Systems, Inc. UML-190-90 6.8 Navigating the Monitor | en Color 20 (PC mode) To access the Color, press the Menu button on the front panel of the monitor, then press the left and right arrows to select the Color icon. Press the up and down arrows to select the Color submenu (range 0-100%). Color Color Temp Red Green Blue 9300 K 6500 K User Fig. 6.6 Color Menu 6.9 Utility To access the Utility menu, press the Menu button on the front panel of the monitor, then press the left and right arrows to select the Utility icon. Press the up and down arrows to select the Utility submenu. Utility Recall Lock Move: EXIT: MENU Fig. 6.7 Utility Menu (Video Mode) Utility Recall AUTO Full Auto Lock Move: EXIT: MENU Fig. 6.8 Utility Menu (PC Mode) Bosch Security Systems, Inc. Installation Manual F01U075712 | 1.0 | 2007.09 21 en | Navigating the Monitor UML-190-90 Submenu Definition Recall Restores default settings. AUTO Full Auto Auto synchronizes screen to graphics adaptor. When selected, displays “Auto in Process...”. Lock Locks user from accessing the monitor OSD menus. To unlock, hold down the menu and up arrow keys together for three (3) seconds. 6.10 Exit To access the Exit menu, press the Menu button on the front panel of the monitor, then press the left and right arrows to select the Exit icon, then press the menu buttons to exit the OSD. Exit H: 63.1KHz PC V: 70.0Hz VER. 1.0 Move: EXIT: MENU Fig. 6.9 Exit Menu F01U075712 | 1.0 | 2007.09 Installation Manual Bosch Security Systems, Inc. UML-190-90 7 Power Management | en 22 Power Management This monitor features a power management system to “power down” upon receipt of the display power management signaling (DPMS) from a DPMS video card. The DPMS-compliant video card performs this signaling system through not sending horizontal, vertical, or sync signal. This monitor enters an appropriate mode through identifying each of the three modes of the signaling system. 7.1 7.2 Power Consumption Mode Power Consumption ON 45 W STANDBY <5 W SUSPEND <5 W ACTIVE OFF <5 W LED Indicator The power management feature of the monitor is comprised of four stages: On (Green), Standby, Suspend, Active Off (Red & Green) and Unsupported mode (Green). Mode LED Color Monitor Operation ON Green Normal operation. STANDBY Amber Screen blanks after idle time and some electronic circuits or all circuitry in the monitor shut down. SUSPEND ACTIVE OFF UNSUPPORTED MODE Green Normal operation but the screen displays error message. POWER OFF Bosch Security Systems, Inc. Red Not operational. Installation Manual F01U075712 | 1.0 | 2007.09 23 8 en | Trouble Shooting Guide UML-190-90 Trouble Shooting Guide Problem Solution No image is displayed on 1. Check that the power cord of the monitor is securely con- screen nected into the wall outlet or grounded extension cable or strip. 2. 3. Power switch should be in the ON position and the LED lit. Check that the Brightness and/or Contrast adjustments of the display have not been turned down to minimum levels. “Check Input Signal” 1. card/computer. message is displayed in PC mode The signal cable should be completely connected to the video 2. The video card should be completely seated in its slot and the computer switched ON. Display image is not cen- Push the down key to activate the Autoset function. tered, is too small, or too large in the PC mode Vertical or horizontal Adjust the Clock and Phase in the OSD submenu. noise is present in the picture Incorrect colors 1. Press the Menu button on the front panel of the monitor, then press the right arrow to select the Color menu. Press the down arrow on the front panel and select 9300K or 6500K. - or - 2. Press the Menu button on the front panel of the monitor, then press the right arrow to select the Utility menu. Press the down arrow on the front panel and select Recall to reset to the default settings. The error message PC is operating with either a resolution or timing mode that is not “Unsupport Mode” is dis- supported by the UML-190-90. Change the PC timing mode to one played of the valid combinations below: 640 x 480; 60/72/75 Hz 800 x 600; 60/72/75 Hz 1024 x 768; 60/70/75 Hz 1280 x 1024; 60/75 Hz F01U075712 | 1.0 | 2007.09 Installation Manual Bosch Security Systems, Inc. UML-190-90 Maintenance | en 9 24 Maintenance To clean the LCD panel, wipe off water droplets or oil immediately with absorbent cotton or a soft lint-free cloth. Staining and discoloration may occur if left on the panel for long periods. If the surface (polarizer) of the LCD panel is dirty or stained, use absorbent cotton or a soft lint-free cloth to remove the residue as follows: 1. Turn off the computer or display. 2. Do not spray any liquid directly on the screen. Dampen a clean, soft, lint-free cloth with water only (using a paper towel or dirty cloth can scratch the screen). 3. Gently wipe the screen starting from the top of the screen to bottom wiping in a downward motion. Be careful not to press too hard to avoid damaging the screen. 4. i To avoid streaking, wipe the screen again with another clean, dry, lint-free cloth. NOTICE! If water does not work, use a mild cleaner labeled for use with LCD panels, available at office supply stores. Do not use any of the following as a cleaning agent: – Ketone type materials – Ethyl alcohol – Ethyl acid – Tolulene – Methyl chloride – Ammonia Use of these materials may permanently damage the polarizer due to a chemical reaction. Bosch Security Systems, Inc. Installation Manual F01U075712 | 1.0 | 2007.09 25 10 en | Technical Specifications UML-190-90 Technical Specifications Electrical Rated Voltage 120/230 VAC, 50/60 Hz Voltage Range 90 to 264 Power at Rated Voltage 45 W operation, 5 W standby Sync Format PAL/NTSC LCD Panel TFT LCD Screen Size (H x V) 376 x 301 mm (14.8 x 11.9 in.) Viewable Picture Area 19 in. (48 cm) measured diagonally Pixel Pitch (H x V) 0.294 x 0.294 mm (0.01 x 0.01 in.) Resolution 1280 x 1024 pixels, 400 TVL Aspect Ratio 5:4 Display Colors 8-bit interface; 16.7 million colors Response Time 5 ms Backlight Two (2) cold cathode fluorescent tubes, rated life 50,000 hours LCD Panel Optical Characteristics Luminance 300 cd/m2, anti-glare, hard-coating treatment Contrast Ratio (CR) 1000:1 Viewing Angle 160° horizontal, 160° vertical @ CR >= 10 Video Input Composite Video (CVBS) 1.0 Vp-p (0.5-1.5 Vp-p), automatic switching from 75 Ohm unbalanced termination to Hi-Z with passive loop-through operation Y/C (S-video) 0.7 Vp-p (Y-signal), 0.3 Vp-p (C-signal), 75 Ohm termination PC Input Analog RGB PC Timing Modes 0.7 Vp-p (0.5-1 Vrms) 640 x 480, 60/72/75 Hz 800 x 600, 60/72/75 Hz 1024 x 768, 60/70/75 Hz 1280 x 1024, 60/75 Hz Controls Front Panel Push-buttons Input Selects Video1, Video2, S-video, or VGA Menu Selects on-screen display (OSD) up cursor, down cursor/auto adjust, left cursor, right cursor Power On/Off Front Panel Lockout Multiple push-button combination On-Screen Display Video Mode Input Source, Screen, OSD, Utility PC Mode Input Screen, OSD, Color, Utility F01U075712 | 1.0 | 2007.09 Installation Manual Bosch Security Systems, Inc. UML-190-90 Technical Specifications | en 26 Indicators LED Power On (green) Standby, Suspend, Active Off (amber) Unsupported Mode (green) Power Off (red) On-Screen VGA: Check input signal Video: Flashes "AV1" or "AV2" when there is a black screen Connectors Video1 (AV1) Composite video: two (2) BNC (1 in, 1 out) Video2 (AV2) Composite video: two (2) BNC (1 in, 1 out) Y/C (S-video) Two (2) mini-DIN, 4-pin (1 in, 1 out) VGA One (1) VGA cable included Power Input 5.5 mm DC input jack Power Adapter (Included) Input: 100-240 VAC, 50/60 Hz Output: 12 VDC, 4.2 A Mechanical Cabinet Material ABS plastic Finish Black Mount Wall mounting compatible with standard bracket, 100-mm centers, M4 thread Dimensions Monitor with Base 430 x 428 x 200 mm (W x H x D) (16.9 x 16.9 x 7.9 in.) Monitor Only 420 x 374 x 60 mm (W x H x D) (16.5 x 14.7 x 2.4 in.) Weight Monitor with base: 6.61 kg (14.6 lb) Monitor only: 4.1 kg (9.05 lb) Environmental Operating Temp. 0°C to 40°C (32°F to 104°F) Storage Temp. -20°C to 60°C (-4°F to 140°F) Humidity Max. 90%, non-condensing Bosch Security Systems, Inc. Installation Manual F01U075712 | 1.0 | 2007.09 Bosch Security Systems, Inc. 130 Perinton Parkway Fairport, New York, 14450 USA Telephone +1 (585) 223 4060 +1 (800) 289 0096 www.boschsecurity.com © Bosch Security Systems, Inc., 2007; F01U075712 | 1.0 | 2007.09; Data subject to change without notice.