F

IND OUT MORE

ON THE WEB

.

WILBURCURTIS.COM

Service Manual Nº 6

W

ILBUR

C

URTIS

C

OMP ANY

, I

NC

.....

GEM 120P

POUR-OVER SATELLITE COFFEE BREWER

TABLE OF CONTENTS

Rough-in Dwg . . .

Inside Cvr.

Start-up . . . . . . . . . . . . . . . .

Brewing Coffee . . . . . . . . .

Decaf & Hi-yield Brewing .

Care & Maintenance . . . .

Trouble Shooting . . . . . . . .

1

Wiring Diagram . . . . . . . . .

Illustrated Parts List . .

Warranty . . . . . .

Back Cover

2

3

1

1

4

5 - 8

CARTON CONTENTS

Qty Item

1

25

1

1

1

1

1

Brewer, Gemini 120P

Satellite, Gem-3 w/Lid

Faucet for Satellite

Guard for Faucet

Brew Cone, Universal

Paper Filters

Service Manual

GEM120P

C

ISO 9001 REGISTERED

WILBUR CURTIS COMPANY

Montebello, CA 90640

9/7/99 9.8 F-1904.p65 . p1X

FOR 120 VOLT OPERATION ONLY

FOR THE LATEST SPECIFICATIONS AND INFORMATION GO TO

WWW.WILBURCURTIS.COM

ROUGH-IN DRAWING - GEMINI 120P

← 9 " → ←

↑

GEMINI

1 6 ½ " →

123 123

2 6 ¾ "

1234567890123456

1234567890123456

1234567890123456

12345678

12345678

12345678

6' ELECTRICAL

CORD

¼ "

↓

↑

↓

↑

4 ½ "

↓

← 2 4 " →

Capacity: 12 Cups.

Finished Brew Capacity: 36 Cups.

Power Requirements: 1700W - 14.2 Amps

Electrical: 120 VAC/60 Hz

S P E C I F I C A T I O N S

Height: 28 inches

Width: 9 inches

Depth: 16½ inches

Shipping Weight: Approximately 47lbs.

THE GEMINI 120P

The Gemini 120P is not an automatic coffee brewer. To brew coffee, water must be poured into the machine by hand. Connecting a water line is not necessary.

START UP

1.

Carefully, unpack the shipping carton. Check for any damage.

2.

Place an empty satellite, Gem-3, on the warmer deck.

CAUTION This brewer is shipped with the thermostat turned on. To prevent damage to the heating element, DO NOT plug in power cord until tank has been filled (step 3).

3.

Pour water into the pour hole on top cover of the brewer. When water starts to come out of the sprayhead, this is an indication that the heating tank is full.*

Figure 1. Filling Heating Tank

4 . Plug cord into a 120 volt, 20 amp, electrical outlet. Switch on power at the toggle switch

(item #31) behind the brewer.

5.

Place a clean satellite on the warmer deck. Push the warmer switch (item #5) on to preheat the satellite.

Make sure satellite is warmed up for at least 10 minutes prior to brewing. Failure to preheat the insulated satellite will result in an instant drop in coffee temperature.

6 . The brew light (item 6) will come on about 15 to 20 minutes after plugging in the power cord. This indicates that the water in the heating tank is at brewing temperature (200º F).

BREWING COFFEE

1 . Place a paper filter into the brew cone (item #1). Pour ground coffee into the filter.

2 . Slide brew cone into the rails under the sprayhead.

3 . Pour cold water through the pour hole on top of the brewer. As water goes into the pour hole, hot coffee will brew into the satellite. Do not pour more than 24 cups (one gallon max.) of water through the pour hole per brew.

Figure 2. Fill brewcone

BREWING DECAFFEINATED OR HIGH YIELD COFFEE

This Gemini 120P brewer comes equipped with the black plastic universal brew cone (Part No.

WC-3621). To brew one gallon (24 cups) of high yield or decaffeinated coffee, the universal brew cone may overflow due to the flow characteristics of these types of ground coffee.

We recommend that you order the large capacity brew cone (Part No. WC-3313), with wire basket (Part No. WC-3314). To order paper filters for this brew cone ask for filter number Gem-6

(4" x 13").

* IMPORTANT Water may be lost from the tank due to evaporation if the brewer is left for long periods of

time without making coffee. When this occurs, refill the tank (step 2 above) before attempt

ing to brew coffee.

1

CARE AND MAINTENANCE

Regular cleaning and preventive maintenance is essential to keep the Gemini 120P looking and working like new. By following these easy cleaning guidelines, you can assure years of quality coffee brewing service.

CLEANING THE GEMINI 120P BREWER

Using a daily routine of cleaning the external parts of the Gemini 120P brewing system should maintain it's new appearance and insure that the flavor of the coffee is always good.

1.

Wipe any spills, dust or debris from exterior surfaces.

2.

Slide out brew cone. Rinse thoroughly with clean water.

3.

Remove sprayhead and clean. Clean around dome area, wiping with nontoxic cleaner.

4.

Clean brew cone rails with a damp cloth or brush. Dry thoroughly with clean cloth.

PREVENTIVE MAINTENANCE

1.

Remove the sprayhead from brewer and clean it once a week; more often in heavy lime areas.

2.

The inside of the heating tank may, occasionally, require the removal of lime buildup. The frequency will depend on local water conditions.

CLEANING THE SATELLITE SERVER

1. Clean the interior of the Satellite and lid daily after the last batch of coffee is used. Use a good nontoxic cleaner. You can also clean inside the satellite with a Scotch Briteä pad.

Rinse thoroughly and dry.

2. Outside of the Satellite should be cleaned with stainless steel polish only, to prevent surface scratches.

3. The gauge glass should be cleaned. Disassemble by unscrewing the top fitting. Be sure to save the rubber washers for reassembly. Use a small brush to scrub inside the gauge glass

(Curtis sells a brush for cleaning inside the glass, WC-3640).

4. Replace the gauge glass. Remember to replace the washers, top and bottom, or leaking will occur.

5. Disassemble the faucet by unscrewing the cap. Rinse and dry all parts. Check faucet seat cups and replace if cracked or leaking. Reassemble the faucet.

IMPORTANT When cleaning your Gemini System, do not use cleansers, liquid bleach, powders or any other substance that contains chlorine. These products promote corrosion and will pit the stainless steel. USE OF THESE PRODUCTS WILL VOID WARRANTY.

2

ALL SERVICE PERFORMED ON THIS UNIT MUST BE DONE BY A QUALIFIED SERVICE TECHINICAN.

PROBLEM Water in heating tank does not heat up at all.

SOLUTION

1 . Check the power supply. Make sure the power cord is properly connected and 120 volts are flowing to the outlet.

2. Check that the thermostat is turned on. Turn the stem clockwise until it stops.

3. Check the reset thermostat to see if the red button has popped out. There should be water in the heating tank. Fill with water then push in the red reset button.

4. Check for voltage at the heating element terminals. Voltmeter should read 110V to

120V. If there is no voltage reading at these terminals, the thermostat may be defective and not allowing current to flow to the element (a common occurrence if the unit has been allowed to run dry). Replace thermostat.

5 . If the volt meter reads 110V to 120V at the heating element terminals, the thermostat is okay. Remove wires from heating element terminals and test them for continuity. You may use an ammeter if available. Clamp it on the black wire, from thermostat to heating element. This will indicate how much current, if any is flowing through the wire. If no continuity or low amp reading is indicated (under 15 amps), replace the heating element.

PROBLEM Brewed coffee cools down too fast.

SOLUTION

1 . Check warmer switch (item #5) by reading voltage at the terminals of warmer element. If there is no voltage reading when switch is pressed, then switch is faulty. Replace switch.

2 . If there is voltage at the terminals of the warmer element (item #22) but the element still does not heat up, test element for continuity. If it is open (burned out), replace element.

PROBLEM Poor spray pattern over coffee grounds. Coffee is not evenly saturated.

SOLUTION

1 . Check all the silicone water tubing for lime buildup and clean out.

2 . Sometimes the silicone tubing gets kinked. Make sure the tubes are not too long where they might fold; or too short where they could be pinched off when the unit is closed up.

3 . Look for an obstruction in the sprayhead fitting and clean if necessary.

4 . The plastic sprayhead might be deformed or in need of cleaning. It is very difficult to tell if the tiny point in the center of the sprayhead is worn or is just slightly off-center.

Replace the plastic sprayhead.

3

4

ILLUSTRA TED P AR TS BREAKDOWN

5

ILLUSTRA TED P AR TS LIST - GEMINI 120P

PART

Nº

WC-2906

WC-5452

WC-5451

WC-38310

WC-37102

WC-6732

WC-5424

WC-4201

WC-4439

WC-4525

WC-3503

WC-3504

WC-3500

WC- 102

WC- 517

WC-1200

WC-3621

WC-4403

CR- 10

WC-3922

WC- 114R

WC- 202

WC-5470

WC-4211

WC-4320

WC-5350

WC-2996

WC-2940

WC-6301

WC-5310

WC-1411

WC-4213

WC-1408

WC-5403

WC-3801

WC-5469

WC-3238

WC-5489

WC-5468

WC-37008

WC- 522

WC-4314

WC-2959

WC-6210

WC-4306

WC- 904

WC-5409

WC-2951

INDEX

Nº

30

31

32

34

26

27

28

29

22

23

24

25

17

18

20

21

13

14

15

16

9

10

11

12

5

6

7

8

1

2

3

4

49

50

51

52

45

46

47

48

39

41

43

44

35

36

37

38

DESCRIPTION

LIST

PRICE

BREW CONE, UNIVERSAL 7 1/8" BLK PLASTIC . . . . . . . . . . . . . . . . . . . . . . . . . . .

SCREW, 6-32x3/8 PHIL ROUND HD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

FILTER, COFFEE #506 PKG. OF 1000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

LABEL, PANELS TOP & BOTTOM GEMINI 120P . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SWITCH, ROCKER 120V RED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

LIGHT, BREW 115V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

POUR PAN GEMINI 120P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

NUT, 3/8" JAM NPT NICKEL PLATED. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

O' RING ½" I.D. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

TUBE, ½" I.D. x 130W SILICONE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

FITTING, POUR PAN GEM 120P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

FITTING, SPRAYHEAD ASSY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

BRACKET, UPPER TANK SUPPORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

TUBE, 5/16" I.D. SILICONE GEN USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

BUSHING, 5/8" SNAP-IN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

NUT, 5/8" LOCK BRASS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SPRAYHEAD, BLUE .178 DIA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

COVER, FRONT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DECK, WARMER ELEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

LABEL, CAREFUL HOT SURFACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

KIT, WARMER ELEMENT 100W 120V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

STRAP, WARMER ELEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

BRACKET, FAUCET SUPPORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

NUT, 8-32 HEX KEP ZINC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SCREW, 6-32x¼ PHIL PAN HD SS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SCREW, 3/8-16x5/8 HEX BOLT, SS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

LEG, SCREW 3/8-16 STD BUMPER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

LEG, ADJUSTABLE 2½ - 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

LEG, ADJUSTABLE 4" COUNTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SWITCH, TOGGLE SPST 25A 125/250 VAC RESISTIVE . . . . . . . . . . . . . . . . . . . . . . . .

THERMOSTAT, CAPILLARY SPST 277V 22A GEN USE. . . . . . . . . . . . . . . . . . . . . . . . . .

POWER CORD 6' 14/8 BLK SJTO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.10

.10

1.50

5.00

10.00

12.00

50.00

10.00

3.00

28.00

30.00

2.00

8.00

5.00

20.00

.10

$ 11.00

.10

18.00

9.00

13.00

6.00

50.00

1.50

.50

8.50

18.00

14.00

10.00

6.00

2.00

1.50

GRIP, CORD 7/8" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SCREEN POUR HOLE CR, GEM-120P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

LABEL, CAUTION WATER ONLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

COVER, TOP GEM-120P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

KNOB, POUR OVER LID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

LID ASSY W/KNOB, POUROVERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

TANK, COMPLETE GEM-120P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

KIT, TANK LID RETROFIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

THERMOSTAT, RESET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

INSERT, SILICONE GROMMET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

FITTING, SYPHON TUBE BRASS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SHIELD, BUBBLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

WASHER, 9/16" TEFLON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ELEMENT, HEATING ENVELOPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

CLIP, HEATING ELEMENT/CAPILLARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

FITTING, TANK WATER INLET NICKEL PLATED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.00

6.00

.50

50.00

5.00

7.50

210.00

20.00

28.00

2.50

25.00

20.00

1.50

25.00

1.50

15.00

6

INDEX

Nº

57

58

59

53

54

55

56

ILLUSTRA TED P AR

PART

Nº

WC-4243

WC-3686

WC-4212

WC-43058

WC-4373

WC-43055

WC-4394

DESCRIPTION

LIST

PRICE

NUT, 3/4-16 LOCK BRASS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

INSULATION WRAP GEM-120P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

NUT, 5/8" JAM NPT BRASS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

PLUG, DRAIN PP RED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

O' RING, 3/4" I.D. x 15/16" O.D. 3/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

GUARD, SHOCK RESET THERMOSTAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

GUARD, SHOCK HEATING ELEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

$ 5.00

12.00

1.50

20.00

1.00

CALL

6.00

ILLUSTRA TED P AR TS BREAKDOWN GEM-3, -5, -8

55555

66666 77777

88888

99999 44444 22222

11111

33333

5

5A

6

7

8

3

4

1

2

INDEX

NNººººº

PART

NNººººº

GEM-5

WC-1201

WC- 114R

GEM 3

WC-3307

WC-5622

WC-2102

WC-2010C

WC-2025

LIST

PRICE

SATELLITE WARMER STAND,115V . . . . .

$124.00

POWER CORD 6’ 18/3 BLK . . . . . . . . . .

10.00

SWITCH, ROCKER 120V RED . . . . . . . . .

SATELLITE SERVER 1½ GAL . . . . . . . .

13.00

239.00

LID GEMINI SATELLITE . . . . . . . . . . .

LID, SATELLITE PLASTIC GEM3 (OPTIONAL)

GAUGE GLASS ASSEMBLY, 8” C . . . . . .

SHIELD, 8 INCH GAUGE GLASS . . . . . . .

GAUGE GLASS, 8 INCH . . . . . . . . . . .

26.50

18.00

11.00

4.50

7

INDEX

NNººººº

9

10

11

11A

12

13

14

15

PART

NNººººº

LIST

PRICE

WC-2007

WC-1901

WC-1800

WC-1841

WC-3705

GEM 4

WC-3503

WC-37102

BRACKET, GAUGE GLASS FORMED . . . . .

SHANK, FAUCET D&T CHROME . . . . . .

FAUCET S’ NONLOCKING . . . . . . . . .

$5.50

24.00

36.00

SATELLITE STAND . . . . . . . . . . . . .

LEG, SCREW BUMPER 3/8"-16 STD . . . .

KIT, WARMER ELEMENT 100W 120VAC . . .

76.00

1.50

8.00

Wiring Diagram Gem -5 & -8

120 Volts, 90 Watts

WARMER ELEMENT

RED

WARMER

SWITCH

WHITE

5B 4B

3A

BLACK

WHITE

POWER CORD

GEM-5D & 8D Parts List

11111

22222

55555

33333

33333

44444

INDEX

Nº

1

2

3

4

5

PART

Nº

GEM-8D

GEM-5D

WC-39223

WC-567

WC- 37102

DESCRIPTION

SATELLITE WARMER STAND, DIGITAL SHORT 120V . . . . . . . . . . . . . . .

SATELLITE WARMER STAND, DIGITAL TALL 120V . . . . . . . . . . . . . . . .

MEMBRANE CONTROL PANEL, GEM-5D & -8D . . . . . . . . . . . . . . . . .

CONTROL BOARD GEM-5D & -8D . . . . . . . . . . . . . . . . . . . . . . .

KIT, HEATER ELEMENT 100W 120V . . . . . . . . . . . . . . . . . . . . . . .

. . .

$248.00

238.00

40.00

100.00

8.00

78

DATE OF PURCHASE_____________ DATE OF INSTALLATION_______________

VOLTAGE_____________________

NOTES_______________________________________________________________________

____________________________________________________________________________

___________________________________________________________________________

___________________________________________________________________________

____________________________________________________________________________

___________________________________________________________________________

____________________________________________________________________________

___________________________________________________________________________

___________________________________________________________________________

____________________________________________________________________________

___________________________________________________________________________

___________________________________________________________________________

____________________________________________________________________________

9

WARRANTY

We hereby certify that the products manufactured by the Wilbur Curtis Company, Inc., are, to thebest of our knowledge, free from all defects and faulty workmanship.

The following warranties and conditions are applicable:

1.

1 Year Parts & Labor from Date of Purchase from Factory: This warranty covers all electrical parts, fittings and tubing.

2.

40 Months or 40, 000 Pounds of Coffee on a set of Grinding Burrs. (ADS Grinders)

3. 3 Years from Date of Purchase: This warranty covers electronic control boards and leaking or pitting of a stainless steel body of a Brewer or Urn.

4.

90 Days from Date of Purchase: On replacement parts that have been installed on out of warranty equipment

All in-warranty service calls must have prior authorization from the manufacturer. For an RMA (Return Merchandise

Authorization) number, call the Technical Service Department at 1-800-995-0417. The Wilbur Curtis Company will allow up to 100 miles, round trip, per in-warranty service call.

CONDITIONS & EXCEPTIONS

The warranty covers original equipment at time of purchase only. The Wilbur Curtis Company, Inc., assumes no responsibility for substitute replacement parts installed on Curtis equipment that have not been purchased from the

Wilbur Curtis Company. Inc The Wilbur Curtis Company will not accept any responsibility if the following conditions are not met. The warranty does not cover and is void under these circumstances:

1) Improper operation of equipment. The equipment must be used for its designed and intended purpose and function.

2) Improper installation of equipment. This equipment must be installed by a professional, certified technician and must comply with all local electrical, mechanical and plumbing codes.

3) Wilbur Curtis Company will not be responsible for the operation of equipment at other than the stated voltages on the serial plate.

4) Abuse or neglect (including failure to periodically clean or remove lime accumulations).

Manufacturer is not responsible for variation in equipment operation due to excessive lime or local water conditions.

5) Replacement of items subject to normal use and wear. This shall include, but is not limited to, light bulbs, shear disks, “0” rings, gaskets, canister assemblies. whipper chambers and plates, mixing bowls, agitation assemblies and whipper propellers.

6) Any faults resulting from inadequate water supply. This includes, but is not limited to, excessive or low water pressure, and inadequate or fluctuating water flow rate.

7) All repairs and/or replacements are subject to our decision that the workmanship or parts were faulty and the defects showed up under normal use.

8) All labor shall be performed during regular working hours. Overtime charges are the responsibility of the owner.

9) Charges incurred by delays, waiting time, or operating restrictions that hinder the service technician’s ability to perform service is the responsibility of the owner of the equipment.

This includes institutional and correctional facilities.

10) All claims under this warranty must be submitted to the Wilbur Curtis Company Technical

Service Department before return of the unit to the factory.

11) All equipment returned to us must be repackaged properly in the original carton. No units will be accepted if they are damaged in transit due to improper packaging.

12) Damaged in transit.

13) The resetting of safety thermostats and circuit breakers, programming and temperature adjustments are the responsibility of the equipment owner.

NO UNITS OR PARTS WILL BE ACCEPTED WITHOUT A RETURN MERCHANDISE AUTHORIZATION (RMA).

RMA NUMBER MUST BE MARKED ON THE CARTON OR SHIPPING LABEL.

All in-warranty service calls must be performed by an authorized service center, where service is available. Call the factory for location near you.

8/22/03 . ecn6023 . revA X

WILBUR CURTIS CO., INC.

6913 Acco St., Montebello, CA 90640-5403 USA

Phone: 800/421-6150 Fax: 323-837-2410

Technical Support Phone: 800/995-0417 (M-F 5:30A - 4:00P PST) E-Mail: [email protected]

Web Site: www.wilburcurtis.com

Printed in U.S.A. 8/20/03 F - 1904 rev A

FOR THE LATEST SPECIFICATION INFORMATION GO TO WWW.WILBURCURTIS.COM