advertisement
FX-Family
MELSEC PLC
The world’s favorite micro PLCs
10 Million FX PLCs Worldwide ///
Over
30 Years Experience ///
Expanded Micro PLC Control /// Networking Solutions ///
Analog Solutions /// Positioning Solutions ///
Global leader /// Global leader /// Global leader /// Global leader /// Global
Global Leader
The MELSEC FX3U/FX3UC series are the third generation on programmable controllers of the Mitsubushi Electric FX family.
They offer improved network capability and solutions for positioning tasks.
10 Million FX
The FX Family of PLCs is the PLC of choice across the world, industries and applications.
Mitsubishi Electric has always worked closely with its customers to design the
PLC that they want for their applications.
The manufacturing and use of 10 million
FX CPUs is a demonstration that this close working relationship has delivered quality, reliability and the product that customers want.
Over 30 Years
The FX Family of PLCs has been an important part of control engineering for over
30 years. Throughout its history, the product has evolved from the original F Series into today's current FX3G series.
The FX Family has proven to be highly reliable and it consistently improves its compatibility with previous PLC generations.
Number 1 in the world
Mitsubishi Electric was shown to be the largest volume producer of PLCs in the world following the 2004 Worldwide
PLC survey by the respected American automation research company ARC.
2 ARC is protected by ARC Advisory Group copyright 2004
/// Contents /// Contents /// Contents /// Contents /// Contents /// Contents
Contents
What makes a world leading PLC?
Range overview
FX3U/FX3UC, a new concept in PLCs
FX3G, an automation standard
FX1N, the modular micro
FX1S, micro control
Programming and software
Networking
Analog solutions
Positioning solutions
Displays solutions
Applications
Section 2: Technical Informations
13
14
11
12
7-9
10
4-5
6
17
18
15
16
3
World leading PLCs /// World leading PLCs /// World leading PLCs /// World l
What makes a world leading PLC range?
Adapter or "ADP" units are used on the left hand side of the main PLC unit.
Memory cassette port is located under the removable front cover.
Global use
Wide range power supply means your
FX solution will work all over the world.
International acceptance
Shipping approvals such as Lloyds, German
Lloyds, ABS, RINA, Det Norse Vetaritas, for example plus CE and E1 compliance for
Low Voltage and EMC directives as well as manufacturing to Automotive industry quality levels, make the FX Family PLCs products to trust.
The standard RS422 Mini-DIN programming port can also be used for HMI connection.
Optional communication boards are available in USB, RS232C,
RS422 and RS485 formats.
The RUN/STOP switch has become a familiar feature with all FX Family PLCs.
Flexible design
The FX Family is designed so that the main
PLC CPU acts as a platform to which you can add and customize the special functions you need – making every FX your personal PLC.
4
eading PLCs /// World leading PLCs /// World leading PLCs /// World leading
Main base unit where CPU,
I/O and power supply are contained in a single unit.
All FX PLC units can be mounted on a DIN rail or directly mounted with screw fixings.
Easy
Programming
The FX Family incorporates an easy programming concept where several complex tasks can be reduced to a single instruction.
Fast and reliable
FX PLCs continually push the limits of high speed operation to process your applications more effectively and accurately.
Simple ribbon connection links each unit together.
Bright LED lamps indicate I/O and power status.
Special function blocks can be added to the right hand communications bus of the PLC.
Compatibility
The FX Family of PLCs continues to raise the level of backward compatibility with many existing FX PLC programs being transferable. And in later models, sharing common peripherals and special function blocks means even greater protection for your investment in both FX and the machine or process being controlled.
5
The power to perform /// The power to perform /// The power to perform /
The power to perform
/ FX3UC
Ultra high speed, maximum performance and a simplified design concept make this the ultimate micro PLC.
FX3G
Advanced control, multiple communication possibilities and a wide range of options make this PLC an industry leader.
FX1N
This powerful micro brings the flexibility of the modular
PLC design concept but, with the ease of use typical of
FX Family PLCs.
FX1S
A compact micro controller for simple applications, supported by a strong communications capability.
I/O
The FX Family of PLCs builds on previous performance and capability, ensuring you have a comprehensive range of control and automation options to choose from.
Model
Power supply
Maximum I/O
Digital I/O
Cycle period/ logical instruction
PLC program memory
FX1S
100–240 V AC,
24 V DC
30
(34 optional)
Relay/
Transistor
0.55 µs
2 k steps
FX1N
100–240 V AC,
12-24 V DC
128
(132 optional)
Relay /
Transistor
0.55 µs
8 k steps
FX3G
100–240 V AC
256**
Relay /
Transistor
0.21 µs or 0.42 µs
32 k steps
FX3U
100–240 V AC,
24 V DC
384*
Relay /
Transistor
0.065 µs
64 k steps
FX3UC
24 V DC
384*
Transistor
0.065 µs
64 k steps
Summary table of FX PLCs
Note * : When networked with CC-Link or AS-Interface (Discrete I/O, maximum 256)
Note ** : When networked with CC-Link or AS-Interface (Discrete I/O, maximum 128)
A solution for every application
Micro PLCs have opened up a world of opportunities in Industrial Automation due to their small size and low cost. Now many applications benefit from enhanced performance, easier manufacturing, maintenance and greater reliability.
The FX Family has been a part of this revolution for over 30 years and has developed and redeveloped a range of products to suit most applications. The FX Family consists of four main ranges which are distinct and independent but compatible.
Depending on your application and control needs, you can choose from; the simple
FX1S CPU, the modular FX1N range, the powerful FX3U and now the current and dynamic FX3G.
With the FX Family there really is a solution to most applications.
6
/// FX3U a perfect PLC concept /// FX3U a perfect PLC concept /// FX3U
The FX3U has an enhanced communications bus that automatically switches into high speed mode for communication with new FX3U expansion modules.
Full compatibility is still available with
FX2N and FX0N expansion blocks, and when these are configured the FX3U automatically reduces the bus speed to suit.
This means greater support for existing installed systems as well as delivering high performance and greater response with new installations.
Adapters add flexibility
A major design enhancement of FX3U is the new adapter expansion bus on the left hand side of the FX3U CPU. Through this bus users can add additional analog and temperature units as well as multiple communications and positioning blocks.
FX3U a perfect
PLC concept
The FX3U CPU brings a combination of greater flexibility and increased performance to the FX Family.
New high speed bus
The FX3U design has increased the opportunity to configure the PLC directly for your needs.
Following the standard FX Family configuration, the FX3U CPU can be expanded to the right hand side using a wide range of options. These include input and output blocks as well as special function blocks such as analog, pulse train and network communication units.
FX3U has a unique new system of directly programmable adapters.
However, the major benefit for the user is that the analog and positioning adapter units no longer require the use of the traditional To/From instruction to configure and operate.
All control is through direct access data registers and setting bits. This means quicker set-up, easier use, and above all much higher processing speeds.
The FX3U can use new FX3U blocks as well as standard FX2N and FX0N expansion blocks..
7
FX3U/FX3UC a perfect PLC concept /// FX3U/FX3UC a perfect PLC concept /// F
FX3U/FX3UC. More power.
More performance.
FX3U/FX3UC Base Unit Expansion I/O
Network master
Maximum
256 I/O
Remote I/O Remote I/O Remote I/O
Remote network stations
FX3U/FX3UC provides additional I/O and networking capacity.
Maximum
256 I/O
System Maximum
384 I/O
Increased I/O capacity
With enhanced networking functions, the
FX3U/FX3UC requires an increased input/ output (I/O) range. FX3U/FX3UC can support systems with combined local I/O and networked I/O up to a total of 384 I/O points. For users, this means increased system control and added possibilities for advanced networks.
In addition FX3U/FX3UC also fully supports Profibus/DP as well as Ethernet using
TCP and UDP protocols.
Basic instruction
Applied instruction (MOV)
FAST
FAST
FX3U/FX3UC provides increased performance in all areas.
Note: 4.5 times increase in speed is measured under the following conditions: program capacity=16 k step, with an I/O usage of 144 points. Program scan time is then; FX3U/FX3UC:
4.6 ms and FX2N: 21.0 ms, an increase in processing speed of
4.56 times.
Up to 4.5
times faster
This means the PC MIX value has been greatly improved with basic instructions now being processed in 0.065 µsec.
For users this means quicker program response and more accurate process performance as inputs, outputs and actions are processed and monitored more times per second.
Auxilliary Relay (M)
State Flags (S)
Timers (T)
Data Registers (D)
7680 points
3072 points
4096 points
1000 points
512 points
256 points
40768* points
8000 points
*Includes R Registers
FX3U/FX3UC offers increased resources as well as increased performance.
8 times more memory
FX3U/FX3UC comes with a standard internal memory of 64 k steps, which is 8 times more memory than FX2N.
More memory means users can write larger and more complex programs, store more data in file registers, or take greater advantage of using IEC 61131-3 style programming tools.
8
5 times more data storage
With a larger program memory comes the need for more operational devices such as timers, state flags, auxiliary relays and data registers. The FX3U/FX3UC has increased capacity in all of these major areas making program construction easier. Data register capacity has increased by a factor of
5 reflecting the needs of users who have an increased requirement to log operation information against products or batches of products being manufactured.
A typical example of this can be found in the Food and Pharmaceutical industries.
Here exact process data such as oven temperatures and cooking times or quantities of ingredients mixed need to be stored against production batches – all this requires increased data handling and data capacity within the PLC.
75 new instructions
The FX3U/FX3UC has 75 new instructions in comparison with FX2N. This now makes available 249 instructions for program creation. All of the instructions follow the traditional FX Applied instruction concept designed to make the task of application building and program writing easier and quicker, with less chance for errors.
FX3U/FX3UC a perfect PLC concept /// FX3U/FX3UC a perfect PLC concept ///
New instructions include greater control over data processing with a range of new comparison and string manipulation commands.
LOGE (Nr. 125)
Calculates the natural logarithm in floating point
SORT2 (Nr.149)
Sort tabulated data
TBL (Nr. 152)
Batch data positioning mode
BAND (Nr.257)
Defines a band or range of valid numbers
IVWR (Nr.273)
Write parameter to inverter
RS 485
RS 232
GOT1000
Inverter multidrop
Some examples of new instructions from the FX3U/FX3UC.
Inverter 1
FX3U/FX3UC has a range of flexible communication options.
RS 422
Inverter 8
USB
Simple high speed positioning
The FX3U/FX3UC has been designed with six high speed counters that can each count up to 100 kHz simultaneously per channel.
This, combined with three 100 kHz pulse train outputs, means users can directly configure simple 3-axis positioning systems without the use of additional modules.
A great communicator
FX3U/FX3UC has strengthened the communications capability of the FX Family even further.
The new adapters allow up to three RS communication channels to be operated simultaneously allowing multiple HMIs to be connected to a single FX3U/FX3UC CPU or combinations of HMIs, third party devices and programming tools – the choice is yours.
The FX3U/FX3UC also supports a wide range of network options including
AS-interface, Profibus-DP, CC-Link,
DeviceNet, CANopen as well as Ethernet.
Adapter modules increase positioning performance.
The FX3UC is the ideal choice for applications where there is not much space for the controller hardware. The smallest base unit with 8 digital inputs and 8 transistor outputs takes up just 27 % of the space required for a comparable FX3U unit – and yet the FX3UC incorporates all the features of the FX3U.
However, the new high speed counter ADP and pulse train ADPs can provide the
FX3U/FX3UC with maximum positioning performance. Each unit can process signal speeds of up to 200 kHz.
The connections for the FX3UC inputs and outputs on the front side can be wired with ribbon cable connectors. For this purpose system cabling sets and remote I/O terminal blocks for easy and fast connections are available.
FX3U/FX3UC at a glance
I/O range
16–384 (Discrete I/O, maximum 256)
Program memory
64 k steps (standard)
Basic instruction processing
0.065 µsec/logical instruction
Analog signal processing
Up to 80 analog inputs,
Up to 48 analog outputs
Analog resolution
8, 12 and 16 bits
Analog options
19 analog input, output and temperature blocks available for selection
Positioning
Internal:
6 high speed counters (100 kHz)
2 high speed counters (10 kHz)
3 pulse train outputs (100 kHz), transistor unit only
External (FX3U only):
High speed counter block (50 kHz)
High speed counter ADP module
(200 kHz)
Pulse train ADP (200 kHz)
Pulse train output block (1 MHz)
9
FX3G powerful micro control /// FX3G powerful micro control /// FX3G ///
FX3G an industry standard
FX3G PLCs are used in many applications for processing and packaging as well chilled storage and transportion of food items.
Since its launch, the FX3G has been a standard of micro PLC control.
Customized control
The FX3G is an introductory compact PLC and is the newest addition to the FX3 series, designed for simple yet performance-critical applications that require discrete control of up to 128 local I/O or up to
256 I/O with CC-Link remote I/Os.
Incorporating innovative FX3 series technology the customer is presented with a suite of benefits. These include a large program memory to implement sophisticated algorithms plus high speed execution to enhance system productivity.
Highly flexible
A dual bus architecture provides flexible expansion possibilities and with the ability to handle analog, high speed, positioning, and inverter control, the FX3G is able to successfully adapt to a range of applications in industry areas such agriculture, water processing, material handling, food processing and more.
The great communicator
With a wide range of network and serial protocols available, such as Ethernet,
CC-Link and Modbus, the FX3G enables seamless integration and data communications between both Mitsubishi Electric and third-party devices. Furthermore, a built-in
USB port permits convenient connection to any PC or laptop.
FX3G at a glance
I/O range
14–256 (Discrete I/O, maximum 128)
Program memory
32 k steps (internal)
Basic instruction processing
0.21 µs or 0.42 µs/logical instruction
Analog signal processing
Up to 74 analog inputs
Up to 41 analog outputs
Analog resolution
8, 12 and 16 bit
Analog options
19 analog input, output and temperature blocks available for selection
Positioning
Internal:
Up to 4 high speed counters (max. 10 kHz) up to 2 high speed counters (max. 60 kHz) up to 3 (2) pulse train outputs (100 kHz)
FX3G has the versatility to handle applications from a wide range of industries.
10
/ FX1N modular micro /// FX1N modular micro /// FX1N modular micro ///
FX1N the modular micro
Powerful performance
The FX1N saves space, cost and engineering time with the use of powerful, built in, positioning tools such two 100 kHz pulse train outputs and up to two 60 kHz high speed counters. These can be used to create simple 2-axis positioning systems, linked to servo amplifiers or stepper motor drivers without the need for additional PLC hardware saving space, cost and engineering time.
FX1N has six shipping approvals. It has been used in applications from controlling temperature in containers to managing diesel engines.
The FX1N offers comprehensive expansion options.
The FX1N provides a simple introduction to modular micro control offering comprehensive functionality and expansion options.
Compatibility cuts costs
The FX1N provides many user benefits including excellent compatibility with other FX Family PLCs. The FX1N is upwardly compatible to the FX2N/FX3G using many of the FX2Ns I/O and special function blocks. It also shares the same programming structure as the FX1S. This means that users benefit from learning and using one PLC programming syntax; resulting in faster program development and reduced programming errors.
In addition, users benefit from a reduced stock and spare parts requirement as the
FX1N uses the same expansion boards as the FX1S and the same special function and expansion I/O blocks as the FX2N.
FX1N at a glance
I/O range
14–132
Program memory
8 k steps (standard)
Basic instruction processing
0.55 µsec/logical instruction
Analog signal processing
66 analog inputs
33 analog outputs
Analog resolution
8, 12 and 16 bits
Analog options
12 analog input, output and temperature blocks available for selection
Positioning
Internal:
2 high speed counters 60 kHz,
4 high speed counters 10 kHz
2 pulse train outputs (100 kHz), transistor unit only
11
FX1S micro control /// FX1S micro control /// FX1S micro control /// FX1S //
FX1S micro control
Remote control
The FX1S has an additional range of BD expansion boards providing RS232,
RS485 and RS422 communications options. These can be used to connect and control various third party products such as bar code readers or panel printers.
Simple programming
The FX Family has a simple programming structure combining Basic and Applied instructions. The Basic instructions are common to all FX Family PLCs. Applied instructions provide the specialist control options such as data comparisons, PID and communications control, all of which are available on FX1S. As each FX PLC range increases in capability (FX1S, FX1N, FX3G,
FX3U/FX3UC) so do the number of available Applied instructions.
FX1S has been used in a wide range of embedded control applications.
FX1S offers communication and real time control from a single unit.
Fit and forget
Typically FX1S applications are small, embedded control functions that are hidden away or unaccessible under normal maintenance activities. This is why the FX1S has been designed to be a robust low maintenance PLC. Features such as the maintenance free, 2000 step EEPROM memory and real time clock management all help to make the FX1S a self managing system, reducing the impact on the maintenance engineer.
FX1S at a glance
I/O range
10–34
Program memory
2 k steps (standard)
Basic instruction processing
0.55 µsec/logical instruction
Analog signal processing
Up to 2 points
Analog resolution
12 bits
Analog options
2 analog input BD board
1 analog output BD board
Positioning
Internal:
2 high speed counters 60 kHz,
4 high speed counters 10 kHz
2 pulse train outputs (100 kHz), transistor unit only
Example of connectivity to 3rd party products
12
/// Programming /// Programming /// Programming /// Programming ///
Progressive software concepts
The Mitsubishi FX PLC Family has a worldwide reputation for reliability, performance and ease of use. These key values have also been used to form
Mitsubishi’s integrated software concept, MELSOFT.
Simple and intuitive
Productivity tools
Programming software for PLCs is constantly evolving. Users are placing more focus on reusable program code and function block concepts. This helps to reduce errors, reduce programming time and to help manage the whole programming process – increasing overall productivity.
GX Developer offers ease of use for programmers of all skill levels.
The key to any good software is that it is simple to use. Mitsubishi’s GX Developer
PLC programming packages have achieved this by using intuitive design.
One step further with iQ Works
Mitsubishi Electric's iQ Works software is a suite of four MELSOFT software packages that enable intuitive programming and setup of an iQ Platform system, including system/network configuration, Q and FX
Series programming, Q Motion Controller and Servo setup, GOT1000 HMI screen design. This next generation software provides a fully customizable user friendly environment with the developers in mind.
First time user?
For users who do not have the time to take local training, there is the option of using Mitsubishi’s home study software,
FX-TRN-BEG, where PLC programs can be created, simulated and debugged in the safety of a PC simulation.
They also have comprehensive help functions and an advanced communications layer, ensuring safe reliable communication to the target PLC.
Often the biggest cost on a project is engineering time.
Choose what you need
GX Developer offers users the chance to program all Mitsubishi MELSEC PLCs from a single package. However, for users who only need support for FX based systems there is GX Developer FX.
Mitsubishi also provide GX IEC Developer packages, providing IEC61131-3 compliant programming in; Instruction List,
Ladder, Function Block, Structured Text and SFC formats. Using standard programming languages, like IEC61131-3, on large programming projects can help users save costs by creating reusable PLC code and Function Blocks.
Learning to program can be achieved quickly using interactive software.
MELSOFT is a wide range of software solutions designed to optimize your plant productivity.
13
Networking solutions /// Networking solutions /// Networking solutions /
Networking and communication solutions
Remote maintenance
With communications technology it is now possible to put PLC control in the most remote locations. Using a PLC with a RS232 interface to a telemetry solution, such as a
GSM modem, allows the user the ability to remotely monitor and maintain the system. It can also allow the remote system to send alarm messages, warnings or general status information back to the user’s central data processing centre.
FX Family PLCs have a wide range of communications options.
Applications are often required to integrate between each other across a factory, to report production or tracking data back for office based processing and in some cases be remotely monitored and maintained when the application is in an inaccessible location. The FX Family of PLCs has evolved to match this demand at all levels.
Networks make sense
Networked solutions to complex applications often make the overall solution easier to achieve and more cost effective. For example a conveyor system integrated with a warehouse pick and place system may extend over many hundreds of meters, and by using a fieldbus, such as CC-
Link, wiring, troubleshooting and maintenance can be dramatically reduced.
Example of remote pumping station.
Easy communications
Today’s FX Family of PLCs share a basic communication concept where additional
RS232, RS422 or RS485 communications boards can be added to the main base unit without increasing the required cabinet space. These can then be used for communication to various third party devices like bar code readers, printers and modems.
FX Family PLCs, such as FX1N, FX3G, FX3U and FX3UC, have a wider range of communications modules. These include options for connection to open and bespoke networks such as Ethernet, Profibus-DP,
CC-Link, DeviceNet, CANopen, AS-interface or Modbus for example.
14
Networking solutions /// Networking solutions /// Networking solutions /// Analog solutions /// Analog solutions /// Analog solutions /// Analog
Analog solutions
Analog control is one of the most important areas for any automation system.
Critically for users the concern is to match the performance demanded by the application to the available solutions in a cost effective way.
Where is analog used?
Analog control is widely used. In simple terms it allows a variable signal to be used to control items such as a motor’s speed or to sense inputs such as fluid levels.
쐽
Digital to analog (D-A) control
Here a digital PLC value is output as an analog signal. It can be used, for example, to send a speed command to an inverter which in turn causes the motor to increase or decrease speed.
Analog to digital (A-D) control
In this type of control a variable signal is sent to a PLC where it is converted in to a direct digital value. An example of this could be the measurement of the level of a liquid in a storage tank so that the exact amount of stored liquid can be controlled by the PLC.
쐽
Temperature control
Temperature control is the third type of analog control. An example of use could be where the temperature of a furnace is measured and compared by the PLC against a set range. Additional heating or cooling can then be applied to maintain a constant temperature.
Inverter
Example: D-A control can be used to set the speed of an inverter driving a motor.
Example:
Temperature control keeps the liquid at the correct viscosity.
Example:
A-D control can be used to control the filling speed of the container.
Analog solutions are an important part of control engineering and can be used to simplify and accurately control actions happening in the production environment.
22 solutions to choose from
The FX Family offers a wide range of analog solutions from 1 and 2 channel BD boards for FX1S up to 8 channel input blocks like the FX2N-8AD where temperature, voltage and current input can be mixed on the same block. FX analog blocks also come in a range of resolutions from 8 bit up to
16 bit signal processing. Overall there are
22 different analog options available to users of the FX PLC Family.
With this range of choice and flexibility it is sure that there will be a solution here for most applications.
Example of temperature control.
15
Positioning solutions /// Positioning solutions /// Positioning solutions /// Displays /// GOTs /// Displays /// GOTs /// Displays /// GOTs /// Displays ///
Positioning solutions
X-Y table for simple shaping
The larger the range of output pulse frequencies available means greater speed and/or accuracy is achievable. For example, if a stepper motor with a larger number of steps is used, the travel distance per step can be reduced, resulting in an increased system accuracy.
쐽
High speed counter input
When a motor is being driven, its relative position can be controlled by counting the number of output pulses.
However, for a more accurate process,
reading the actual position from an encoder feedback directly into a high speed counter is preferred. This helps to overcome issues of backlash and slippage as the actual position is measured and not assumed.
Horizontal drill station
Vertical drill station
Positioning built in as standard
Simple positioning solutions can be effectively managed within a standard FX PLC.
Using simple positioning solutions can help increase the accuracy of the work process, reduce waste and rework as well as provide a higher quality of production.
FX PLCs come with high speed counters
(in some cases up to 100 kHz) and pulse train outputs (also in some cases up to
100 kHz) as standard. The high speed counters can be configured in single pulse train inputs, The high speed counters can be configured in a single or two phase input.
Pulse train outputs can be configured to provide continuous pulse streams at different frequencies or a set quantity of pulses at a single frequency.
Typical applications
Simple positioning applications typically involve independently controlled operational axis and can sometimes have many requirements. In the example of an X-Y table, a relative position is achieved by driving each axis until its target position is achieved, regardless of what happens with the other axis. There are two main elements to achieve this type of positioning control.
쐽
Pulse train outputs
A stream of output pulses can be used as a drive signal to a line driver, stepper motor or servo amplifier, which then causes the connected motor to perform the positioning activity.
There are also optional modules and adapters that can provide additional high speed counters with performance up to
200 kHz. The same is true for pulse train outputs with 200 kHz and 1 Mpps (1 MHz) output options available.
Example of conveyor belt control.
16
Positioning solutions /// Positioning solutions /// Positioning solutions /// Displays /// GOTs /// Displays /// GOTs /// Displays /// GOTs /// Displays ///
Display solutions
An increasingly important area of any automation solution is the reporting and display of operational information. This data enables operators, maintenance teams and business managers to make informed decisions in the best interests of the business.
The right tool for the right job
For maximum efficiency, each user requires access to information at their work place in a form that highlights the important data for them first. This means a range of different tools are required. As an example, here are three possible scenarios.
쐽
The machine operator
Machines often have a lot of manufacturing debris around or are subject to hygienic cleaning as in the food industry. Any display located in this environment would need to have a high Ingress Protection (IP) rating, indicating a high degree of waterproofness.
In the food industry hygiene is very important.
The maintenance team
The critical information for a maintenance engineer is the error and diagnostic data within the PLC as this is used to diagnose any process problems. However, additional
The FX3U-7DM can be directly mounted within the PLC (FX3U) or mounted on the front cabinet.
information regarding the operational
"hours run" or cycles processed, which could be called soft information as it is calculated on operational parameters, could allow the maintenance engineer to predict possible failure and arrange preventative maintenance.
Access to this data could be through the machine operator's terminal, across a network or through a dedicated display mounted inside or on the control cabinet itself.
The business manager
In a production controllers office it would be better to display information through a network to their existing desktop PC. In this application a piece of software such as an OPC server/client, a Java applet, an
Active X control or a SCADA system would allow lots of data from lots of sources to be displayed in a clear and concise way giving the production controller the overview of the business operation that they need.
The GOT1000 is a typical HMI.
It may also be a benefit to the operator to have a large and clear display to reduce the chances for error from misreading, due to poor light or small fonts being used. It is also recognized that the use of graphics also reduces the chances for reading errors with complex data.
Data the way you want it
Mitsubishi offers a wide range of visualization solutions from simple data displays such as the FX3U-7DM, advanced Graphic Operator
Terminals like the GOT1000 Series and E1000
Series, and a wide choice of software solutions from the MELSOFT software suite.
This powerful combination of hardware and software means there is a cost effective solution for most applications.
17
Application solutions /// Application solutions /// Application solutions /// Automation solutions /// Automation solutions /// Automation solutions
Where have FX PLCs been used?
Sanitation management on Eurostar rollingstock.
18
Customer applications with FX PLCs have been wide spread from critical applications in pharmaceutical industries to sublime applications in the leisure industry.
However, the FX PLC Family still remains the PLC of choice for many machine builders as it is flexible, compact and easy to use, which is why it is so often used.
Here are just a few examples of applications that customers have completed in the past
쐽
Agriculture
– Plant watering systems
– Plant handling systems
– Saw mill (wood)
쐽
Building management
– Smoke detection monitoring
– Ventilation and temperature control
– Lift (elevator) control
– Automated revolving doors
– Telephone management
– Energy management
– Swimming pool management
쐽
Construction
– Steel bridge manufacturing
– Tunnel boring systems
쐽
Food and drink
– Bread manufacture (mixing/baking)
– Food processing (washing/sorting/ slicing/packaging)
Leisure
– Multiplex cinema projection
– Animated mechatronics
(museums/theme parks)
쐽
Medical
– Respiration machine testing
– Sterilization
쐽
Pharmaceutical/chemical
– Dosing control
– Polution measurement systems
– Cryogenic freezing
– Gas chromotography
– Packaging
쐽
Plastics
– Plastic welding systems
– Energy management systems for injection molding machines
– Loading/unloading machines
– Blow molding test machines
– Injection molding machines
쐽
Printing
쐽
Textiles
쐽
Transportation
– Sanitation on passenger ships
– Sanitation on rail rolling stock
– Fire tender, pump management
– Waste disposal truck management
쐽
Utilities
– Waste water treatment
– Fresh water pumping
Swimming pools are managed using FX PLCs.
ALPHA
///
FX1S
///
FX1N
///
FX3G
///
FX3U
///
FX3UC
///
Technical Information Section
Further Publications within the PLC Range
Brochures
System Q Family
Product catalogues for programmable logic controllers and accessories for the further MELSEC PLC series
HMI Family
Product catalogue for operator terminals, supervision software and accessories
Inverter Family
Product catalogue for frequency inverters and accessories
Servo and Motion Systems
Product catalogue for servo amplifiers and servo motors as well as motion controller and accessories
Robots Family
Product catalogue for industrial robots and accessories
Low Voltage Switchgears
Product catalogue for low voltage switchgears, magnetic contactors and circuit breakers
Automation Book
Overview on all Mitsubishi automation products, like frequency inverters, servo/motion, robots etc.
More information?
This product catalogue is designed to give an overview of the extensive range of FX Family of MELSEC PLCs. If you cannot find the information you require in this catalogue, there are a number of ways you can get further details on configuration and technical issues, pricing and availability.
For technical issues visit the www.mitsubishi-automation.com website.
Our website provides a simple and fast way of accessing further technical data and up to the minute details on our products and services. Manuals and catalogues are available in several different languages and can be downloaded for free.
For technical, configuration, pricing and availability issues contact our distributors and partners.
Mitsubishi partners and distributors are only too happy to help answer your technical questions or help with configuration building.
For a list of Mitsubishi partners please see the back of this catalogue or alternatively take a look at the "contact us" section of our website.
About this product catalogue
This catalogue is a guide to the range of products available. For detailed configuration rules, system building, installation and configuration the associated product manuals must be read. You must satisfy yourself that any system you design with the products in this catalogue is fit for purpose, meets your requires and conforms to the product configuration rules as defined in the product manuals.
Specifications are subject to change without notice. All trademarks acknowledged.
© Mitsubishi Electric Europe B.V., Factory Automation - European Business Group
2 MITSUBISHI ELECTRIC
System Description
1
ALPHA Controllers
2
MELSEC FX Base Units
3
MELSEC FX Extension Units
4
MELSEC FX Special Function Modules
5
Accessories
6
Dimensions
7
Software & Programming
Others
CONTENTS
///
5
6
7
3
4
1
2
MITSUBISHI ELECTRIC 3
///
SYSTEM
DESCRIPTION
ALPHA and MELSEC PLC Systems
The ALPHA Series
The ALPHA closes the gap between single components and a PLC system. It combines all advantages of a PLC system in a very compact housing and therefore provides a space and cost saving alternative to relays and contactors.
The ALPHA series is suited to applications in industrial machines and in automated building services.
Key enhancements in the ALPHA2 include a program capacity of 200 function blocks, an extra-large display, expansion options and a second communications port. The instruction set, includes math operations,
PWM and SMS text messaging functions.
All this opens up possibilities for analog and temperature control as well as remote operation.
The MELSEC FX Family
The MELSEC FX family includes a very comprehensive range of base and expansion modules, enabling you to configure a customised system tailored to your precise requirements.
Depending on your application and control needs you can choose from the small, attractively-priced, "stand-alone" FX 1S series, the expandable FX 1N series or the more powerful FX 3G and FX 3U series.
With the exception of the FX 1S all FX series can be expanded to adapt them to the changing needs of your installations and applications.
Network integration is also supported, making it possible for your FX controllers to communicate with other PLCs, controllers and HMIs. The PLC systems can be configured as local stations in MITSUBISHI networks. In addition these flexible units can also be used as master or slave units on fieldbus’s like Profibus/DP and CC-Link.
The MELSEC FX Family controllers also support CANopen, DeviceNet,
AS-Interface and Ethernet. Special versions with E-Mark label (ECE requestion) are available upon request for vehicle application.
+ (A) (B) 1 2
3 4 5 6
7
DC INPUT
8 9 10 11
12 13 14 15
POWER
24V DC
MITSUBISHI
ESC
AL2-24MR-D
OK
100-240
VAC
L N
S/S X1
X0
X2
X3
X4
X5 X7
X6
IN
MITSUBISHI
POWER
RUN
ERROR
0V
24V
Y0
Y1
COM0 COM1COM2
Y3
Y4
Y5
OUT
0 1 2 3
4 5
14MR
-ES/UL
100-240
VAC L
N
S/S
X1
X0 X2
X3
X4
X5
X6
X7 X11 X13
X10 X12
MITSUBISHI
0 1 2 3
4 5 6 7
8 9 10 11
12 13 14 15
IN
POWER
RUN
ERROR
24+
0V
Y0
COM0
Y1 Y2
COM1 COM2
Y3
Y4
Y5 Y6
COM4
Y7
OUT
0 1 2 3
4 5 6 7
10 11
Y11
24MR
-ES/UL
Expandability and Power
The MELSEC FX family is highly flexible, enabling fast and efficient configuration and programming for the application at hand.
It is the ideal choice, no matter whether you need to install a simple control application requiring 30 I/Os (FX 1S ) or a demanding, complex system with up to
384 I/O points (FX 3U ).
The use of memory cassettes can expand the available programming space on some
FX Family PLCs while generally providing a long term program storage option for all
FX PLC users. In addition, memory cassettes can also allow programs to be switched at very short notice simply by replacing the cassette.
There are five series in the MELSEC FX family, each of which is designed for a different application profile:
앬 The FX
1S
Series
The MELSEC FX 1S series is the inexpensive entry to the MELSEC FX family. With its small dimensions it is also an excellent alternative to relay/contactor control configurations.
앬 The FX 1N Series
The CPUs of the FX 1N series offer more power than the FX 1S series, plus modular expansion capabilities. You can choose from I/O expansion modules and special function modules for a wide variety of applications.
앬 The FX
3G
Series
The FX3G is an introductory compact PLC and is the newest addition to the FX3 series, designed for simple yet performance-critical applications. Incorporating innovative FX3 series technology the customer is presented with a suite of benefits.
앬 The FX 3U Series
The FX 3U series gives you the freedom of modular expandability, with a wide selection of expansion modules and special function modules.
The FX 3U is the fastest PLC systems available, with a cycle time of just 0.065 μs per logical instruction. This gives users a powerful CPU delivering modular PLC performance in a compact PLC design.
앬 The FX 3UC Series
The performance of the FX 3UC is the same as that of the FX 3U series, but it has more compact dimensions. It is the ideal choice for applications where little space is available for the controller.
Thus the FX 3U and FX 3UC series give you the most powerful CPU for your application and combines all benefits of a compact PLC system with the performance of a modular PLC system.
FX
1S
No. of inputs/outputs
Program steps
FX 1N
FX 3G
FX /FX 3UC
Cycle time (µs)
* Available with optional cassette
4 MITSUBISHI ELECTRIC
SYSTEM
DESCRIPTION
///
Features
The modular design of the FX family makes it extremely flexible, enabling it to be used for a very broad range of applications.
You can configure tailor-made systems by combining modules from a variety of different categories (see figure).
All modules are electrically isolated from their environment with optocouplers for maximum reliability.
Communications modules
Interface modules with
RS232/RS422/RS485 interfaces for the connection of peripherals and PLC–PLC links.
Network modules for Ethernet,
Profibus/DP, CC-Link, AS-Interface, DeviceNet, CANopen and for the configuration of proprietary Mitsubishi networks
DIGITAL
INPUTS/OUTPUTS
COMMUNI-
CATIONS-
MODULES
KOMMUNI-
KATIONS-
MODULE
DIGITALE
EIN-/AUSGÄNGE CPU
ANALOG
INPUTS/
OUTPUTS
ANALOGE
EIN-/AUS-
GÄNGE
POSITIONING
MODULES
POSITIONIER-
MODULE
Digital I/O modules
For a variety of signal levels with relay or transistor switches
Positioning modules
High-speed counter modules with support for the connection of incremental rotary transducers and positioning modules for servo and stepping motor drives
Analog I/O modules
For processing current/voltage signals and temperature registration with a direct connection option for
PT100 resistance thermometers and thermocouplers
Digital and special function modules – configuration
The options for using digital and special function modules are dictated by the CPU used in the system.
When calculating the number of special function modules you can use in a system you must take both the number of digital modules and the maximum number of special function modules that can be used into account.
The table on the right provides a simplified guide to the number of modules you can use in each system type. More detailed information and the basic principles of system configuration can be found in the corresponding manuals.
FX1S
FX1N
FX3G
FX3U
FX3UC
MITSUBISHI ELECTRIC
Stand-alone PLC with 10 / 14 / 20 or 30 I/Os; no special function modules but 1 I/O adapter board can be installed
PLC with max. 132 I/Os
A maximum of 2 special function modules or digital expansion modules with up to
32 inputs and outputs (4x8 I/Os or 2x16 I/Os) or one special function module and one digital extension module with up to 16 inputs and outputs (2x8 I/Os or 1x16 I/Os) can be connected.
PLC with max. 256 I/Os
A maximum of 8 special function modules and digital extension modules with up to
128 I/Os can be connected to the right side of the main unit. In addition, a maximum of
4 special adapters from the FX3U series can be connected to the left side.
PLC with max. 384 I/Os
To the left side of the main unit, a maximum of 10 special adapters from the FX3U series can be connected. To the right side of the main unit, up to 8 special function modules and digital extension modules with up to 256 I/Os can be connected.
PLC with max. 384 I/Os
To the left side of the main unit, a maximum of 6 special adapters from the FX3U series can be connected. To the right side of the main unit, up to 4 special function modules and digital extension modules with up to 256 I/Os can be connected.
5
///
SYSTEM
DESCRIPTION
The Components for an FX PLC System
A basic FX PLC system can consist of a stand alone base unit, with the functionality and I/O range increased by adding extension I/O and special function modules. The following section provides an overview of options available.
Base Units
The entire FX PLC range can be AC or DC powered with a mix of input and output styles. The PLCs can be programmed with the user friendly GX or GX IEC Developer programming software, allowing programs to be transferred between different
FX PLCs. All PLC base units include an integrated real time clock.
Base units are available with different I/O configurations from 10 to 128 points but can be expanded to 384 points depending upon the FX range selected.
Extension Boards
Extension adapter boards can be installed directly into the base unit and therefore do not require any additional installation space. For a small number of I/O (2 to 4) an extension adapter boards can be installed directly into the (left-hand side) FX
1S
,
FX 1N , FX 3G or FX 3U controller. Interface adapter boards can also provide the FX
PLC with additional RS232, RS422, RS485 or USB interfaces. To connect special function modules (e.g. Ethernet module) a communication adapter has to be installed (except FX 3UC ).
Extension I/O Modules
Unpowered and powered extension I/O modules can be added to the FX 1N /FX 3U and FX 3UC PLCs.
For expansion modules powered by the base unit, the power consumption has to be calculated as the 5 V DC bus can only support a limited number of expansion I/O
(for further details please refer to next page
– calculation of the power consumption).
Special Function Modules
A wide variety of special function modules are available for the FX 1N , FX 3G , FX 3U and
FX
3UC
PLCs. They cover networking functionality, analog control, pulse train outputs, data logging function and temperature inputs.
Memory extension and operator terminals
Each FX family base unit can be equipped with a memory cassette. The programming unit interface enables the connection of programming tools like PC and hand held programming units as well as graphical operator terminals.
FX
0N
-3A
POWER
0
ON L
1 2
4
ATION
5 6 7
OFF
ON
8
9 A B C D E F
ERR
IN
ERROR STATION
OFF
ON
MOD 0 1 2 3
6
Extensions for inside
PLC installation
Extension modules
(installation outside the PLC)
Network modules
Communications boards
Communications modules
Dedicated function modules
Memory cassettes
External Display
Digital
Analog
Digital
Analog
Temperature
AS-Interface
CC-Link
CAN open
Ethernet
Profibus/DP
DeviceNet
Modbus RTU/ASCII
SSCNET
RS232
RS422
RS485
USB
RS232
RS485
High speed counter
Positioning
ALPHA2
쎲
쎲
—
—
쎲
쎲
—
—
—
—
—
—
—
쎲
—
—
—
—
—
—
—
쎲
—
—
—
—
—
—
쎲
—
쎲
쎲
—
쎲
쎲
쎲
—
—
쎲
쎲
FX1S
쎲
쎲
—
—
—
—
—
—
쎲
쎲
—
�
—
쎲
쎲
쎲
—
쎲
쎲
—
쎲
쎲
쎲
쎲
FX3G
쎲
쎲
쎲
쎲
쎲
—
—
쎲
쎲
—
쎲
쎲
—
쎲
쎲
쎲
FX1N
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
—
—
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
FX3U
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
—
—
—
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
FX3UC
쎲
쎲
쎲
쎲
쎲
쎲
—
—
Reference page
11, 45
11, 46
29
33
11, 34
12, 39
41
43
44
37
48
38
43
40
44
44
36
48
48
47
37
12, 49
54
� only via IEC function blocks
MITSUBISHI ELECTRIC
SYSTEM
DESCRIPTION
///
Calculation of the Power Consumption
The power consumption figures on the
5 V DC bus for the special function modules are shown in the specifications tables on the following pages.
The maximum permissible currents on the
5 V DC and 24 V DC bus are shown in the table below.
Modules Max. current
5 V bus
FX 3G -14/24M
첸
-ES(ESS) —
FX 3G -40/60M
첸
-ES(ESS)
FX 3U -16/32M
첸
-ES(ESS)
—
500 mA
FX 3U -48–128M
첸
-ES(ESS) 500 mA
FX3UC-16MT/D(DSS) 600 mA
FX3UC-32MT/D(DSS)
FX3UC-64MT/D(DSS)
FX3UC-96MT/D(DSS)
560 mA
480 mA
400 mA
—
—
—
24 V bus
400 mA
400 mA
400 mA
600 mA
—
The residual currents for the 24 V DC service voltage at different input/output configurations are shown in the tables on the right.
A maximum of 256 I/Os are possible for
FX3U/FX3UC (128 I/Os for FX3G).
Max. residual current values (in mA) for FX 3U -16M
첸
-E
첸첸 through FX 3U -32M
첸
-E
첸첸 for the permissible configuration
Number of additional outputs
40 25
32 100 50
8
0
24 175 125 75 25
16 250 200 150 100 50 0
325 275 225 175 125 75
0
25
400 350 300 250 200 150 100 50 0
0 8 16 24 32 40 48 56 64
Number of additional inputs
Max. residual current values (in mA) for FX 3U -48M
첸
-E
첸첸 through FX 3U -128M
첸
-E
첸첸 for the permissible configuration
Number of additional outputs
64 0
56 75 25
48 150 100 50 0
40 225 175 125 75 25
32 300 250 200 150 100 50
8
0
24 375 325 275 225 175 125 75 25
16 450 400 350 300 250 200 150 100 50 0
525 475 425 375 325 275 225 175 125 75
0
25
600 550 500 450 400 350 300 250 200 150 100 50 0
0 8 16 24 32 40 48 56 64 72 80 88 96
Number of additional inputs
An external power supply is necessary, if the residual current for the 24 V supply of the special function modules is not sufficiant.
Sample Calculations
The tables below and on the right show different examples for sample power calculation for a PLC system.
The current values for the special function modules can be found in the specifications on the following pages.
Comparison with the current value tables show that the calculated figures for the
5 V bus lie within the allowable ranges.
In the example below all units can be supplied sufficiently with the internal
24 V power supply.
Module
FX3U-80MR/ES
FX3U-4AD
FX3U-4DA
FX3U-ENET
No.
1
3
2
1
24 V DC calculation
Current / module
600 mA
Calculation
+600 mA
90 mA
160 mA
240 mA
-180 mA
-320 mA
-240 mA
-140 mA !!!
An external 24 V power supply has to be added in the example above.
5 V DC calculation
Current / module
+500 mA
Total current
+500 mA
110 mA
120 mA
—
Result:
-220 mA
-240 mA
—
500 – 460 mA
40 mA (OK !)
Module
FX3U-48MR/ES
FX2N-16EYR-ES/UL
FX2N-8EX-ES/UL
FX2N-8EYR-ES/UL
FX3U-4AD-PT-ADP
FX2N-32ER-ES/UL
FX2N-16EX-ES/UL
FX2N-10PG
FX2N-32CCL
No.
1
1
1
1
Result:
1
1
1
1
1
16
16
—
—
8
—
—
X
24
—
Number of I/Os
—
8
—
Y
24
16
16
—
—
—
64 + 64 + 16 = 144! (< 256) OK!
—
—
8
8
—
—
—
X/Y
—
— X = 8
Y = 24
➞
X = 16
Y = 0
➞
24 V DC calculation
Total
햲
Total current
+325 mA
햳
-50 mA
+275 mA (OK!)
+150 mA residual current for extension unit
FX2N-32ER-ES/UL
0 mA
-50 mA
+100 mA (OK!)
5 V DC calculation
Current / module
500 mA
—
—
—
30 mA
690 mA
—
120 mA
130 mA
Total current
+500 mA
0 mA
0 mA
0 mA
-15 mA
+485 mA (OK!)
+690 mA
0 mA
-120 mA
-130 mA
+440 mA (OK!)
햲
Total no. of I/Os which are connected to a base unit to calculate the max. residual current values (see tables)
햳 see tables above (max. residual current values)
MITSUBISHI ELECTRIC 7
///
ALPHA
SYSTEM
OUTLINE
1
왎
The ALPHA 2 Series
Up to 15 inputs can be used as digital inputs and up to for (controllers with 24 V DC supply).
The analog inputs (0–10 V, 9 bits resolution) can be used very easily due to the integrated gain function and a
Schmitt-trigger.
The communication with a computer and with external peripherals is supported by the two integrated serial interfaces .
Integrated calender/real-time function with up to 1200 switch ON or OFF commands in one program
+ -
(A)
(B) 1
2
3 4
5
6 7
DC INPUT
8
9 10
11
12 13
14
15
POWER
24V DC
ESC
OK
MITSUBISHI
Direct programming via
8 function keys on the front control panel without any additional programming device
The units can be expanded to additional inputs/outputs with extension modules to be mounted directly into the controller
AL2-24MR-D
Flexible mounting through integrated
DIN rail adapter and screw fixing
Large LC display for programming, entering, and editing plain text, values and bar graphs
Password protection can be activated.
The program is stored in a maintenancefree EEPROM with a memory capacity of
5000 bytes.
A backup battery is not required.
Description of the Unit Components
Power supply terminals
Mounting hole
+ (A) (B)
1
2
3 4
5
6 7
DC INPUT
8
9 10
11
12 13
14
15
Adapter for
DIN rail mounting
Slot for
EEPROM cassette or connector for programming cable
POWER
24V DC
ESC
OK
AL2-24MR-D
Protective cover
LCD display
(4 lines x 12 characters)
MITSUBISHI
Terminals for digital/analog inputs
Connector for PC,
GSM, modem and other automation components
Operating keys (8 pcs.)
Housing cover
(place holder) for the extension modules
8
Connection for extensions
Terminals for digital outputs
MITSUBISHI ELECTRIC
ALPHA
BASE
UNITS
///
왎
Specifications ALPHA 2
+ -
(A)
(B) 1
2
3 4
5 6
7
DC INPUT
8 9
10 11
12 13
14 15
POWER
24V DC
MITSUBISHI
ESC
OK
AL2-24MR-D e.g. AL2-24M
쏔
-
쏔
ALPHA 2 Base Units
The ALPHA 2 controllers offer simple reliable control for a range of automation applications including lighting, air conditioning, security systems, and temperature and water control.
Special features:
앬
앬
앬
앬
앬
앬
Transistor and relay output options
Analog input/output
High Speed counters up to 1 kHz
GSM function for communication with mobile phones
Language support for 8 different languages
Display unit for messages and function block data
1
Base Units with 10–24 I/Os
AL2-10MR-D AL2-14MR-A AL2-14MR-D AL2-24MR-A AL2-24MR-D
Electrical specifications
Integrated inputs/outputs
Power supply
Digital inputs
Analog inputs
Channels
Integrated outputs
Max. power consumption
Typ. power consumption
Weight
All I/Os
ON /OFF
Dimensions (WxHxD)
Order information
Accessories
—
—
4
10
100–240 V AC
6
W 4.9
10
24 V DC
6
6
6
4
14
100–240 V AC
8
—
—
6
14
24 V DC
8
8
8
6
24
100–240 V AC
15
—
—
9
24
24 V DC
15
8
8
9 kg 0.2
mm 71.2x90x55
Art. no. 215070
4.0
2.5/0.75
0.2
71.2x90x55
215071
5.5
4.5/2.0 240 V AC
3.5/1.5 120 V AC
0.3
124.6x90x52
215072
7.5
4.0/1.0
0.3
124.6x90x52
215073
7.0
5.5/2.5 240 V AC
4.5/2.0 120 V AC
0.35
124.6x90x52
215074
Power supplies with DIN-rail or wall mounting possibilities for powering the 24 V DC modules (refer to the power supply chapter in this catalogue)
9.0
5.0/1.0
0.3
124.6x90x52
215075
MITSUBISHI ELECTRIC 9
///
GENERAL
SPECIFICATIONS
1
Environmental Specifications
Ambient temperature
Protection rating
Noise immunity
Dielectric withstand voltage
Allowable relative humidity
Shock resistance
Vibration resistance direct mounting
DIN rail mounting
Insulation resistance
Ambient conditions
Certifications
Display: -10–55 °C, Hardware: -25–55 °C (storage temperature: -30–+70 °C)
IP20
1000 Vpp with noise generator; 1 µs at 30–100 Hz, tested by noise simulator
3750 V AC, >1 min. according to EN60730
35–85 % (no condensation)
Acc. to IEC 68-2-27: 147 m/s
2 acceleration, 11 ms 3x3 directions
Acc. to IEC-2-6: 19.6 m/s
2 acceleration, 80 min. in each direction
Acc. to IEC-2-6: 9.8 m/s 2 acceleration, 80 min. in each direction
500 V DC, 7 M
W acc. to EN60730-1
No corrosive gases, no dust
Please refer to pages 66–67 in this catalogue
Electrical Specifications
Power supply
Inrush current at ON
24 V DC
£
7.0 A (at 24 V DC)
Allowable momentary power failure time 5 ms
Digital Inputs
Input voltage
Input current
Response time
OFF
ON
®
®
ON
OFF
100–240 V AC (50/60 Hz)
£
6.5 A (at 240 V AC)
10 ms
24 V DC
(+20 %/-15 %)
100–240 V AC
(+10 %/-15 %), 50/60 Hz
The input current changes depending on Source or Sink.
For Sink:
(AL2-10/14/24MR-D)
= 5.5 mA, 24 V DC
For Source:
(AL2-10/14MR-D)
= 6.0 mA, 24VDC
(AL2-24MR-D)
= 5.5 mA, 24 V DC
I01–I08
0.13 mA/120 V AC*
0.25 mA/240 V AC*
I09–I15
0.15 mA/120 V AC*
0.29 mA/240 V AC* ms 10–20 ms 10–20
35–85 ms, 120 V AC
25–55 ms, 240 V AC
35–85 ms, 120 V AC
50–130 ms, 240 V AC
Analog Inputs
Analog input range
Resolution
Conversion speed
Voltage
Impedance
Accuracy
0–500
9 bit, (10 V/500) ms 8
0–10 V DC k
W
142 ±5 %
±5 % (0.5 V DC)
—
—
—
—
—
—
* Current leakage from the sensors connected to the inputs might provide enough current to turn the controller On. Do not use two wire sensors
Type
Switching voltage (max.)
Rated current
Max. switching load
Minimum load
Response time
- inductive load
Type
Relay
V 250 V AC, 30 V DC
10M, 14M: 8 A/point
24M (001-004): 8 A/point
24M (005-009): 2 A/point
14M, 24M:249 VA, 250 V AC/373 VA, 250 V AC
24M: 93 VA, 125 V AC/93 VA, 250 V AC
10 mA, 5 V DC ms
£
10
Programming Specifications
Programming method
Program capacity
Program processing
Number of available instructions
Program storage
Data storage
Processing time
Real-time clock
Program protection
Function block
200 function blocks or 5000 bytes
Cyclic processing of the stored program
38 different function blocks
Integrated EEPROM and optional additional EEPROM cassette
At voltage loss the current status of values, running time meters, and real-time data are stored for up to 20 days (at temperatures of 0 to 25 °C) through integrated capacitors
1 ms + 20 m s/log. instruction (complex commands 500 m s/instruction)
Seconds, minutes, hours, day of week, month, year (4-digit); accuracy: 5 s/day; automatic summer and winter time toggling
Program and keys (3 levels)
10 MITSUBISHI ELECTRIC
EXTENSION
MODULES
///
RELAY
OUTPUT
EO1
EO2
MITSUBISHI
EO3
EO4
4EYR
Digital Extension Modules
There are 4 different extension modules available for the ALPHA 2, which allow the controller to be extended through additional inputs or outputs. The modules are inserted directly into the ALPHA 2 and therefore do not take up any additional space.
The AL2-4EX has the additional feature that 2 inputs may be used as high-speed counters with a counting frequency of 1 kHz.
All modules feature photocoupler insulation for all I/Os.
Note: The digital extension modules cannot be used with the AL2-10MR series.
1
AL2-4EX AL2-4EYR AL2-4EYT
Inputs
Integrated inputs
Input voltage
Input current
4
220–240 V AC
7.5 mA at 240 V AC (50 Hz),
9.0 mA at 240 V AC (60 Hz)
Outputs
Integrated outputs
Output type
—
—
Switched voltage (max.)
Rated current
V —
A —
Electrical specifications
Power Supply AC range (+10 %, -15 %) 220–240 V AC
Mechanical specifications
Weight kg 0.05
Dimensions (WxHxD) mm 53.1x90x24.5
4
24 V DC (+20 %, -15 %)
5.4 mA ±1 mA at 24 V DC
—
—
—
—
24 V DC
0.05
53.1x90x24.5
—
—
—
4
Relay
250 V AC, 30 V DC
2 A per output
100–240 V AC
0.05
53.1x90x24.5
—
—
—
4
Transistor
5–24 V DC
1 A per output
24 V DC
0.05
53.1x90x24.5
Order information Art. no. 142522 142521 142523 142524
Note: EI1 and EI2 of the AL2-4EX can be used as high-speed counter inputs. In each case the response time for the high-speed counter inputs will be 0.5 ms or less.
The AL2-4EX-A2, AL2-4EX, AL2-4EYR and AL2-4EYT modules can not be used with the AL2-10MR series.
+ V1+ V1-
V2+ V2-
POWER
24V DC
CH1
OUTPUT
CH2
0~10V
MITSUBISHI
POWER
450°C
CH1
-50°C Line
450°C
CH2
-50°C
Line
AL2-2TC-ADP
K-type Thermocouple
-50~450°C
CH1
CH2
L1+
L1SLD L2+
L2SLD
+ V1+ V1-
V2+ V2-
POWER
24V DC
CH1
OUTPUT
CH2
0~10V
MITSUBISHI
POWER
200°C
CH1
-50°C Line
200°C
CH2
-50°C
Line
AL2-2PT-ADP
PT100 -50~200°C
CH1
CH2
L1+
L1L2+
L2-
I
2-
POWER
24V DC
+
V1+ I1+
VI1-
ANALOG
OUTPUT
MITSUBISHI
ANALOG
OUTPUT
V2+ I2+
VI2-
2DA
Analog Extension Modules
The analog extension modules significantly increase the range of applications for the
ALPHA 2. With these modules it is possible to output voltage or current signals or to measure temperatures.
Three different analog extension modules are available:
앬 The AL2-2DA offers two additional analog outputs for the ALPHA 2 and converts a digital input value into a voltage or a current. This module is inserted directly into the
ALPHA 2.
Note: the AL2-2DA cannot be used with the AL2-10MR series.
앬 The AL2-2PT-ADP connects an external PT100 sensor to convert temperature readings into analog signals (0–10 V).
앬 The AL2-2TC-ADP connects thermocouple sensors (K type) to convert temperature readings into analog signals (0–10 V).
Analog inputs
Integrated inputs
Connectable temperature sensors
Compensated range
Analog outputs
Integrated outputs
Analog output range voltage current
Electrical specifications
Number of channels
Power Supply
Mechanical specifications
Weight
Dimensions (WxHxD)
Order information
—
—
—
2
0–10 V DC (5 k
⏲
1 M
⏲
)
4–20 mA (max. 500
⏲
)
2
24 V DC (-15–+10 %), 70 mA kg 0.05
mm 53.1x90x24.5
Art. no. 151235
AL2-2PT-ADP
—
—
—
2
PT100 sensor
Temp. coefficient 3.850 ppm/°C (IEC 751)
-50–+200 °C
2
24 V DC (-15–+20 %), 1 W
0.07
35.5x90x32.5
151238
AL2-2TC-ADP
—
—
—
2
Thermocouple (K type), isolated type
(IEC 584-1 1977, IEC 584-2 1982)
-50–+450 °C
2
24 V DC (-15–+20 %), 1 W
0.07
35.5x90x32.5
151239
MITSUBISHI ELECTRIC 11
///
EXTENSION
MODULES
AND
ACCESSORIES
1
12
MITSUBISHI ELECTRIC
ASI
+
ASI
-
ASI
+
ASI
-
AS-Interface Module AL2-ASI-BD
The Actuator Sensor Interface module AL2-ASI-BD in combination with an ALPHA 2 controller facilitates the data communications via an AS-Interface system. The AL2-ASI-BD is attached to an ALPHA 2 series module and forms a slave unit. Up to 4 inputs and 4 outputs can be exchanged with the AS-Interface master.
The addresses of the slave devices in the AS-Interface are assigned either automatically via the master in the network or via a programming device (software).
The maximum communication distance is 100 m without a repeater. If 2 repeaters are used, the distance is extended to up to 300 m.
For the AS-Interface a separate power supply is required. The communication signal is superimposed on the power supply of the AS-Interface bus.
Note: The AL2-ASI-BD cannot be used with the AL2-10MR series.
Module type
Number of I/O points
External power supply
External current consumption
Communications protocol
Weight
Dimensions (WxHxD)
Order information
Slave module
4 inputs, 4 outputs
30.5 V DC (AS-Interface power supply) mA Max. 40
AS-Interface standard kg 0.05
mm 53.1x90x24.5
Art. no. 142525
Memory Cassette AL2-EEPROM-2 Memory Media
With the AL2-EEPROM-2 memory cassettes, a new program can be transferred to the
ALPHA 2 controller’s internal system memory from the cassette, or the program of the internal system memory can be saved to the cassette.
If the memory cassette is used, a certain program can be run temporarily by simply plugging the external memory module onto the ALPHA 2.
After removing the memory cassette, the former program in the internal memory becomes active again.
The memory cassette AL2-EEPROM-2 is not a memory expansion device, but a medium for data exchange.
Memory type
Application
Memory capacity
Function blocks
Dimensions (WxHxD)
Order information
EEPROM
ALPHA 2
5,000 bytes
Max. 200 mm 10x45x25
Art. no. 142526
AL-232CAB
Interface Cable AL-232CAB
The AL-232CAB is an RS232C interface cable. It connects the ALPHA 2 controller to a personal computer running the programming software for the ALPHA 2 controller.
The cable ensures a galvanic isolation between the ALPHA 2 controller and the personal computer. The cable AL-232CAB can not be used for any other connection.
GSM Cable AL2-GSM-CAB
The GSM AL2-GSM-CAB is an RS232C interface cable and it is used to connect the
ALPHA 2 controller to a normal or GSM modem, a personal computer or other serial devices. It can transfer SMS data to a GSM modem for onward transmission to mobile telephones or e-mail addresses. It also permits remote monitoring and remote maintenance.
Note: The above cables cannot be used with the AL2-10MR series.
AL2-GSM-CAB
Connector
Application
Length
Order information
9-pin D-SUB female connector
ALPHA 2 <-> PC m 2.5
Art. no. 87674
9-pin D-SUB male connector
ALPHA 2 <-> PC, modem
1.5
142528
MITSUBISHI ELECTRIC
BASE UNITS
FX1S SERIES
///
The MELSEC FX 1S Series
All units feature two
RUN/STOP switch .
Integration of analog potentiometer for setpoint value entry and an integrated interface, extension, and functions adapters for direct installation in the base unit
High-speed inputs for fast counting tasks with counting frequencies of up to 60 kHz and capabilities interrupt processing
MITSUBISHI
MELSEC
0 1
2 3
4 5
6 7
IN
POWER
ERROR
FX1S-14MR
OUT
0 1
2 3
4 5
The internal service power supply unit for 24 V DC has a capacity of 400 mA.
Note: service power supply is only available for AC Power
Supply types.
Square pulse output
(this applies only to transistor units.)
Two high speed pulse outputs for frequencies up to
100 kHz for outputting and controlling stepping motors
Integrated real-time clock with year, month, day and time
Integrated serial RS422 interface for direct communication with computers
Flexible installation with the integrated DIN rail adapter and screw fastening holes for mounting on flat surfaces
Password access protection facility for effective protection of your intellectual property.
Your PLC programs are stored in a maintenance-free EEPROM user memory with a capacity of 2,000 program steps, so there is no need for a backup battery to protect against power failures.
2
Description of the Unit Components
Fixing hole
Connection of the power supply
Adapter interface
Slot for adapter
2 analog potentiometers
Connection for programming units
Service voltage source
Terminals for digital outputs
100-240
VAC
L
N
S/S
X0
X1
X2
X3
X4
X5
X6
X7
0 1 2 3
4 5 6 7
IN
POWER
RUN
ERROR
Y0
Y1
Y2
24V
0V
COM0 COM1COM2
Y3
Y4
Y5
OUT
0 1 2 3
4 5
14MR
-ES/UL
MITSUBISHI
Protective cover
Terminal cover
Terminals for digital inputs
LEDs for indicating the input status
RUN/STOP switch
LEDs for indicating the operating status
LEDs for indicating the output status
Housing cover
MITSUBISHI ELECTRIC 13
2
///
BASE UNITS
FX1S SERIES
왎
Base Units
100-240
VAC
L
N
S/S
X0
X1
X2
X3
X4
X5
X6
X7
0 1 2 3
4 5 6 7
IN
MITSUBISHI
POWER
RUN
ERROR
24V
0V
Y0 Y1
COM0 COM1COM2
Y2
Y3
Y4
Y5
OUT
0 1 2 3
4 5
14MR
-ES/UL
þ FX 1S
¨ FX 1N
¨ FX 3G
¨ FX 3U
¨ FX 3UC
Base Units FX 1S
The FX 1S series base units are available with 10 to 30 input/output points.
It is possible to choose between relay and transistor output type.
Note: Versions with UL certification are available on request.
앬
앬
앬
Special Features:
앬
앬
앬
앬
앬
앬
앬
Integrated power supply (AC or DC powered)
Maintenance-free EEPROM memory
Ample memory capacity (2000 steps) and device ranges
High-speed operations
Incorporated positioning control
Integrated real-time clock
System upgrades by exchangeable interface and I/O adapter boards for direct fitting into the base unit
LEDs for indicating the input and output status
Standard programming unit interface
User-friendly programming systems, including IEC 61131.3
(EN 61131.3)-compatible programming software, HMIs and hand-held programming units
Base Units with 10–14 I/Os
Max. number inputs/outputs
Power supply
Integrated inputs
Integrated outputs
Output type
Power consumption
Weight
Dimensions (WxHxD)
Order information
6
4
10
24 V DC
Relay
W 6 kg 0.22
mm 60x90x49
Art. no. 141240
FX1S-10
MR-ES/UL
6
4
10
100–240 V AC
Relay
19
0.3
60x90x75
141243
FX1S-10
MT-DSS
10
24 V DC
6
4
Transistor
(source)
6
0.22
60x90x49
141246
FX1S-14
MR-DS
8
6
14
24 V DC
Relay
6.5
0.22
60x90x49
141247
FX1S-14
MR-ES/UL
8
6
14
100–240 V AC
Relay
19
0.3
60x90x75
141248
FX1S-14
MT-DSS
14
24 V DC
8
6
Transistor
(source)
6.5
0.22
60x90x49
141249
Base Units with 20–30 I/Os
Max. number inputs/outputs
Power supply
Integrated inputs
Integrated outputs
Output type
Power consumption
Weight
Dimensions (WxHxD)
Order information
20
24 V DC
12
8
Relay
W 7 kg 0.3
mm 75x90x49
Art. no. 141251
FX1S-20
MR-ES/UL
20
100–240 V AC
12
8
Relay
20
0.4
75x90x75
141252
FX1S-20
MT-DSS
20
24 V DC
12
8
Transistor
(source)
7
0.3
75x90x49
141254
FX1S-30
MR-DS
30
24 V DC
16
14
Relay
8
0.35
100x90x49
141255
FX1S-30
MR-ES/UL
30
100–240 V AC
16
14
Relay
21
0.45
100x90x75
141256
FX1S-30
MT-DSS
30
24 V DC
16
14
Transistor
(source)
8
0.35
100x90x49
141257
14 MITSUBISHI ELECTRIC
BASE UNITS
FX1S SERIES
///
왎
Base Units
Environmental Specifications
Ambient temperature
Protection
Noise durability
Dielectric withstand voltage
Ambient relative humidity
Shock resistance
Vibration resistance
Insulation resistance
Ground
Fuse rating
Environment
Certifications
þ FX 1S
¨ FX 1N
¨ FX 3G
¨
0–55 °C (storage temperature: -20–+70 °C)
IP10
1000 Vpp with noise generator; 1 µs at 30–100 Hz
1,500 V AC, 1 min. (500 V AC for direct voltage modules)
35–85 % (non-condensing)
Acc. to IEC/EN 68-2-27: 15G (3 times each in 3 directions for 11 ms)
Acc. to IEC/EN 68-2-6: 1G (resistance to vibrations from 57–150 Hz for 80 minutes along all 3 axes); 0.5G for DIN rail mounting
500 V DC, 5 M
W
Class D: Grounding resistance 100
W or less
AC models: 250 V 1.0 A; DC models: 0.8 A
Avoid environments containing corrosive gases, install in a dust-free location.
Please refer to pages 66–67 in this catalogue
FX 3U
¨ FX 3UC
2
Electrical Specifications
Power supply 24 V DC (+10 %/-15 %)
Inrush current at ON 10 A/0.1 ms (at 24 V DC)
Allowable momentary power failure time
Primary power supply
5 ms
24 V DC, 400 mA
External power supply (24 V DC) —
100–240 V AC (+10 %/-15 %),
50/60 Hz (±10 %)
15 A/5 ms (at 100 V AC);
25 A/5 ms (at 200 V AC)
10 ms
400 mA
Switching voltage (max.)
Max. output current
Max. switching current
Response time
- per output
- per group*
- inductive load
- lamp load
Life of contacts (switching times)**
Type
Transistor modules
V <250 V AC, <30 V DC 5–30 V DC
A 2 0.5
A 8
80 VA
W 100 ms 10
0.8
12 W
1.2
0.2
3,000,000 at 20 VA; 1,000,000 at 35 VA;
200,000 at 80 VA
* The limitation applies only per reference terminal for each group, 1 and 4 outputs for relays and transistors. Please observe the terminal assignments for the group identification.
** Not guaranteed by Mitsubishi Electric.
Programming Specifications
Program data
Program memory
Program execution
Program protection
Number of instructions
Cycle period
Operands
Internal relays
Special relays
State relays
Timers
External setpoint entry via potentiometer
Counter
High-speed counter inputs
Data register
Index register
Special register
Pointer
Nesting operands
Interrupt inputs
Constants
2.000 steps EEPROM (internal)
Periodical execution of the stored program
Password protection with 3 protection levels. Note: Protection levels may only be changed with FX-10P/FX-20P/FX-30P.
27 sequence instructions, 2 step ladder instructions, 85 applied instructions
0.55–0.7 µs/logical instruction
512 total, with 384 general (M0–M383) and 128 latched (M384–M511)
256 (M8000–M8255)
128
64 (max. 63 timers, partially switchable to 100 ms and 10 ms)
2 potentiometers
32 (16 bit), C0–C31
1 phase, 6 points max: 60kHz/2 points, 10kHz/4 points ; 2 phase, 2 points max: 30kHz/1 point, 5kHz/1 point
256 subtotal (128 general (D0–D127) and 128 latched (D128–D255))
16
256 (16 bit), D8000–D8255
64, P0–P63
8, N0–N7
6
16 bits: K: -32768 to +32767, hex: 0–FFFF
32 bits: K: -2147483648 to +2147483647, hex: 0–FFFF FFFF
MITSUBISHI ELECTRIC 15
///
BASE UNITS
FX1N SERIES
The MELSEC FX 1N Series
High-speed inputs for fast counting tasks with counting frequencies of up to 60 kHz and interrupt processing capabilities
2
Integration of for direct installation in the base unit
The base units have integrated, maintenance-free EEPROM user memory for up to 8,000
PLC program steps, so there is no need for a backup battery to protect against power failure.
You can also configure password protection to prevent unauthorized access to your programs.
Integrated RUN/STOP switch and two analog potentiometers for setpoint value entry.
MITSUBISHI
MELSEC
0
4
1
10
2
5
11
14
3
6
12
7
13
15
IN
RUN
ERROR
FX1N-24MR
2
0
4
3
1
5
10
11
6
7
The base units can be expanded for up to 128 inputs/outputs with different extension units .
Integrated real-time clock with year, month, day and time
External EEPROM memory cassettes for PLC program storage
Square pulse output
(This only applies for transistor units.)
Two i ntegrated high-speed pulse outputs for frequencies up to
100 kHz for outputting pulse signals and controlling stepping motors
Description of the Unit Components
Terminal cover
Fixing hole
RUN/STOP switch
Slot for memory cassettes, displays and ADPs.
2 analog potentiometers
Connection for programming units
Terminals for service voltage source
Terminals for digital outputs
Terminal cover
Protective cover
100-240
VAC
L
N
S/S
X0
X1
X2
X3
X4
X5
X6
X7 X11 X13
X10 X12
X15
X14
0 1 2 3
4 5 6 7
8 9 10 11
12 13 14 15
IN
POWER
RUN
ERROR
OUT
24+
0V
Y0
COM0
Y1
Y2
COM1 COM2
Y3
COM3
Y4
Y5
Y6
COM4
Y10
Y7
0 1 2 3
4 5 6 7
10 11
Y11
24MR
-ES/UL
MITSUBISHI
16
Protective cover
Terminals for digital inputs
Connection of the power supply
Extension bus
LEDs for indicating the input status
LEDs for indicating the operating status
LEDs for indicating the output status
Housing cover
Lid
MITSUBISHI ELECTRIC
왎
Base Units
100-240
VAC
L N
S/S
X0
X1
X2
X3
X4
X5
X6
X7
X11 X13
X10
X12
X15
X14
0 1 2 3
4 5 6 7
MITSUBISHI
8 9 10 11
12 13 14 15
IN
POWER
RUN
ERROR
OUT
0 1 2 3
4 5 6 7
10 11
24+
0V Y0
COM0
Y1
Y2
COM1
COM2
Y3
COM3
Y4
Y5
Y6
COM4 Y7
Y10
Y11
24MR
-ES/UL
BASE UNITS
FX1N SERIES
///
¨ FX 1S
þ FX 1N
¨ FX 3G
¨ FX 3U
¨ FX 3UC
Base Units FX 1N
The FX 1N series base units are available with 14 to 60 input/output points.
It is possible to choose between relay and transistor output type.
Note: Versions with UL certification are available on request.
앬
앬
앬
앬
앬
앬
앬
Special Features:
앬 Integrated serial interface for communication between
Personal computers and HMI
Standard programming unit interface
LEDs for indicating the input and output status
Detachable terminal blocks for units with 14, 24, 40, and 60 I/Os.
Slot for memory cassettes
All DC models with variable voltage from 12 up to 24 V
Integrated real-time clock
Exchangeable interface and I/O adapter boards for direct fitting into the base unit
2
Base Units with 14–24 I/Os
Specifications
Integrated inputs/outputs
Power supply
Integrated inputs
Integrated outputs
Output type
FX1N-14
MR-DS
8
6
14
12–24 V DC
Relay
Power consumption
Weight
Dimensions (WxHxD)
Order information
W 13 kg 0.45
mm 90x90x75
Art. no. 141258
FX1N-14
MR-ES/UL
8
6
14
100–240 V AC
Relay
29
0.45
90x90x75
141259
FX1N-14
MT-DSS
14
12–24 V DC
8
6
Transistor
(source)
13
0.45
90x90x75
141260
FX1N-24
MR-DS
24
12–24 V DC
14
10
Relay
15
0.45
90x90x75
141261
FX1N-24
MR-ES/UL
24
100–240 V DC
14
10
Relay
30
0.45
90x90x75
141262
FX1N-24
MT-DSS
24
12–24 V DC
14
10
Transistor
(source)
15
0.45
90x90x75
141263
Base Units with 40–60 I/Os
Specifications
Integrated inputs/outputs
Power supply
Integrated inputs
Integrated outputs
Output type
FX1N-40
MR-DS
40
12–24 V DC
24
16
Relay
Power consumption
Weight
Dimensions (WxHxD)
Order information
W 18 kg 0.65
mm 130x90x75
Art. no. 141264
FX1N-40
MR-ES/UL
40
100–240 V AC
24
16
Relay
32
0.65
130x90x75
141265
FX1N-40
MT-DSS
40
12–24 V DC
24
16
Transistor
(source)
18
0.65
130x90x75
141266
FX1N-60
MR-DS
60
12–24 V DC
36
24
Relay
20
0.8
175x90x75
141267
FX1N-60
MR-ES/UL
60
100–240 V AC
36
24
Relay
35
0.8
175x90x75
141268
FX1N-60
MT-DSS
60
12–24 V DC
36
24
Transistor
(source)
20
0.8
175x90x75
141269
MITSUBISHI ELECTRIC 17
///
BASE UNITS
FX1N SERIES
2
왎
Base Units
Environmental Specifications
Ambient temperature
Protection
Noise durability
Dielectric withstand voltage
Ambient relative humidity
Shock resistance
Vibration resistance
Insulation resistance
Ground
Fuse rating
Environment
Certifications
¨ FX 1S
þ FX 1N
¨ FX 3G
¨ FX 3U
0–55 °C (storage temperature: -20–+70 °C)
IP10
1000 Vpp with noise generator; 1 µs at 30–100 Hz
1,500 V AC, 1 min. (500 V AC for direct voltage modules)
35–85 % (non-condensing)
Acc. to IEC 68-2-27: 15G (3 times each in 3 directions for 11 ms)
Acc. to IEC 68-2-6: 1G (resistance to vibrations from 57–150 Hz for 80 minutes along all 3 axes); 0.5G for DIN rail mounting
500 V DC, 5 M
W
Class D: Grounding resistance 100
W or less
AC units: From FX1N-14M
첸 to FX1N-24M
첸
: 250 V AC 1.0 A; From FX1N-40M
첸 to FX1N-60M
첸
: 250 V AC 3.15 A/DC units: 125 V DC 3.15 A
Avoid environments containing corrosive gases, install in a dust-free location.
Please refer to pages 66–67 in this catalogue
¨ FX 3UC
Electrical Specifications
Power supply 12–24 V DC (+20 %/-15 %)
Inrush current at ON
25 A/1 ms (at 24 V DC);
22 A/0.3 ms (at 12 V DC)
Allowable momentary power failure time
5 ms
Primary power supply 24 V DC, 400 mA
External power supply (24 V DC) —
100–240 V AC (+10 %/-15 %),
50/60 Hz (±10 %)
30 A/5 ms (at 100 V AC);
50 A/5 ms (at 200 V AC)
10 ms
400 mA
Switching voltage (max.)
Max. output current
Max. switching current
Response time
- per output
- per group
- inductive load
Life of contacts (switching times)*
* Not guaranteed by Mitsubishi Electric.
Type
Transistor modules
V <240 V AC, <30 V DC 5–30 V DC
A 2
A 8
0.5
0.8
80 VA 12 W ms 10 <0.2(Y0, Y1<5µs)
3,000,000 at 20 VA; 1,000,000 at 35 VA;
200,000 at 80 VA
Programming Specifications
Program data
I/O points (addresses)
Address range
Program memory
Cycle period
Number of instructions
128 (+4 optional)
Max.128 inputs X0–X177, max. 128 outputs Y0–Y177
8,000 steps EEPROM (internal), exchangeable
EEPROM for easy program exchange
0.55–0.7 µs /logical instruction
27 sequence instructions, 2 step ladder instructions,
89 applied instructions
Programming language
Program execution
Program protection
Step ladder, instruction list, SFC
Cyclical execution, refresh mode processing
Password protection with 3 protection levels*
* Protection levels may only be changed with FX-10P/FX-20P/FX-30P.
Operands
Internal relays
Special relays
Step ladder
Timer
Ext. preset value via potentiometer
Counter
High-speed counter
Real-time clock
Data register
File register
Index register
Special register
Pointer
Nestings
Interrupt inputs
Constants
1,536
256
1,000
256
2
235
1 phase, 6 points max: 60kHz/2 points, 10kHz/4 points;
2 phase, 2 points max: 30kHz/1 point, 5kHz/1 point
Year, month, day, hour, minute, second, weekday
8,000
Max. 7,000 (parameter editable),
Total registers = 8,000
16
256
128
8
6
16 bits: K: -32768 to +32767, hex: 0–FFFF; 32 bits:
K: 2147483648 to +2147483647, hex: 0–FFFF FFFF
18 MITSUBISHI ELECTRIC
BASE UNITS FX3G SERIES ///
The MELSEC FX 3G Series
Integrated high-speed counter inputs for processing fast input signals. For example, you can configure two 60 kHz counters and four 10 kHz counters.
Interrupt processing is also handled via the inputs.
Add-in function boards can be installed in the PLC to provide a second RS485/
RS422/RS232 communications interface for programming or network configurations.
Analog function boards for input and output and a function board with
8 analog potentiometers are also available as add-in.
An integrated RUN/STOP switch is available.
Connection possibility for special function adaptermodules
Two integrated serial interfaces for direct communication with computers.
Description of the Unit Components
RAM/EEPROM memory for up to
32,000 PLC program steps gives you plenty of reserve, even for big, complex applications.
The base units can be expanded to provide configurations with up to 256 inputs and outputs with modular and compact extension units .
2
Integrated real-time clock with year, month, day and time
Two integrated pulse outputs for frequencies from 2 to 100,000 Hz for controlling stepping motors and outputting pulse-width modulated signals .
Memory cassette, display module, and expansion board connector
2 analog potentiometers
RUN/STOP switch
Option battery holder
Programming port: RS-422
Programming port: USB
Flip cover for programming port, potentiometer and
Run/Stop switch
Top cover
Terminal cover
Terminal protector
Input terminals
Input indicator LEDs
Operation status indicator
LEDs
Expansion bus connector cover
Output indicator LEDs
Output terminals
Terminal protector
Terminal cover
Protective cover
MITSUBISHI ELECTRIC 19
///
BASE UNITS
FX3G SERIES
2
왎
Base Units ¨ FX 1S
¨ FX 1N
þ FX 3G
¨ FX 3U
¨ FX 3UC
Base Units FX 3G
The FX 3G series base units are available with 14 to 60 input/output points .
It is possible to choose between relay and transistor output types.
Special features:
앬
앬
앬
앬
앬
앬
앬
앬
앬
앬
Integrated USB interface for communication between PLCs and PC
Integrated serial interface for communication between PCs and HMI
LEDs for indicating the input and output status
Detachable terminal blocks for all units
Slot for memory cassettes
Integrated real-time clock
Integrated positioning control
Exchangeable interface and extension adapters for direct mounting into a base unit
Expandable with digital I/O modules, special function modules and ADP modules
User-friendly programming systems, including IEC 1131.3
(EN 61131.3) compatible programming software, HMIs and hand-held programming units
Base Units with 14–24 I/Os
Specifications
Integrated inputs/outputs
Power supply
Integrated inputs
Integrated outputs
Output type
Power consumption
Weight
Dimensions (WxHxD)
Order information
FX3G-14
MR/ES
14
FX3G-14
MT/ESS
14
100–240 V AC 100–240 V AC
8 8
6
Relay
6
Transistor
(source)*
W 31 kg 0.50
mm 90x90x86
31
0.50
90x90x86
Art. no. 231466
* Sink type transistor output units on request.
231470
FX3G-14
MR/DS
14
24 V DC
8
6
Relay
19
0,50
90x90x86
231474
FX3G-14
MT/DSS
14
24 V DC
8
6
Transistor
(source)*
19
0,50
90x90x86
231478
FX3G-24
MR/ES
24
100–240 V AC
14
10
Relay
32
0.55
90x90x86
231467
FX3G-24
MT/ESS
24
100–240 V AC
14
10
Transistor
(source)*
32
0.55
90x90x86
231471
FX3G-24
MR/DS
24
24 V DC
14
10
Relay
21
0,55
90x90x86
231475
FX3G-24
MT/DSS
24
24 V DC
14
10
Transistor
(source)*
21
0,55
90x90x86
231479
Base Units with 40–60 I/Os
Specifications
Integrated inputs/outputs
Power supply
Integrated inputs
Integrated outputs
Output type
Power consumption
Weight
Dimensions (WxHxD)
Order information
FX3G-40
MR/ES
40
FX3G-40
MT/ESS
40
100–240 V AC 100–240 V AC
24 24
16
Relay
16
Transistor
(source)*
W 37 kg 0.70
mm 130x90x86
37
0.70
130x90x86
Art. no. 231468
* Sink type transistor output units on request.
231472
FX3G-40
MR/DS
40
24 V DC
24
16
Relay
25
0,70
130x90x86
231476
FX3G-40
MT/DSS
40
24 V DC
24
16
Transistor
(source)*
25
0,70
130x90x86
231480
FX3G-60
MR/ES
60
100–240 V AC
36
24
Relay
40
0.85
175x90x86
231469
FX3G-60
MT/ESS
60
100–240 V AC
36
24
Transistor
(source)*
40
0.85
175x90x86
231473
FX3G-60
MR/DS
60
24 V DC
36
24
Relay
29
0,85
175x90x86
231477
FX3G-60
MT/DSS
60
24 V DC
36
24
Transistor
(source)*
29
0,85
175x90x86
231481
20 MITSUBISHI ELECTRIC
BASE UNITS FX3G SERIES ///
왎
Base Units
Environmental Specifications
Ambient temperature
Protection
Noise durability
Dielectric withstand voltage
Ambient relative humidity
Shock resistance
Vibration resistance
Insulation resistance
Ground
Fuse
Environment
Certifications
¨ FX 1S
¨ FX 1N
þ FX 3G
0–55 °C (storage temperature: -25–+75 °C)
IP10
1000 Vpp with noise generator; 1 µs at 30–100 Hz
1500 V AC, 1 min.
5–95 % (non-condensing)
147m/s 2 Acceleration, Action time: 11ms, 3 times by half-sine pulse in each direction X, Y, and Z
Acc. to IEC 68-2-6: 1 g (resistance to vibrations from 57–150 Hz for 80 minutes along all 3 axes); 0.5 g for DIN rail mounting
500 V DC, 5 M
W
Class D: Grounding resistance 100
W or less
For FX3G-14M
첸 and FX3G-24M
첸
: 250 V 1 A; For FX3G-40M
첸 and FX3G-60M
첸
: 250 V 3.15 A
Avoid environments containing corrosive gases, install in a dust-free location.
Please refer to pages 66–67 in this catalogue
¨ FX 3U
¨ FX 3UC
2
Electrical Specifications
Power supply
Inrush current at ON
100–240 V AC (+10 %/-15 %), 50/60 Hz
30 A/<5 ms (at 100 V AC);
50 A/<5 ms (at 200 V AC)
Allowable momentary power failure time
10 ms
Primary power supply —
External power supply (24 V DC) 400 mA
Switching voltage (max.)
Transistor modules
V <240 V AC, <30 V DC 5–30 V DC
Max. output current
- per output
- per group*
A 2
A 8
0.5
0.8
Max. switching current
Response time
- inductive load 80 VA ms 10
12 W
<0.2(<5 µs for Y0,Y1)
�
Life of contacts (switching times)
� 3,000,000 at 20 VA; 1,000,000 at 35 VA;
200,000 at 80 VA
햲
The 40 and 60 I/O points main units supports 5 µs for Y2.
햳
Not guaranteed by Mitsubishi Electric.
* This limitation applies only per reference terminal for each group, 4 and 8 outputs for relays and
2 and 4 outputs for transistors. Please observe the terminal assignments for the group identification.
Programming Specifications
Program data
I/O points (addresses)
Address range
Program memory
Cycle period
Number of instructions
Programming language
Program execution
Program protection
256 total (combined local and CC-Link remote I/O)
Max. 128 direct addressing and max. 128 remote I/O
32,000 steps EEPROM (internal), exchangeable EEPROM memory cassette
0.21 µs or 0.42 µs/contact instruction
29 sequence instructions,
2 step ladder instructions,
123 applied instructions
Step ladder, instruction list, SFC
Cyclical execution, refresh mode processing
2 different keywords, maximum password length 16 characters
Operands
Internal relays
Special relays
Step ladder
Timer
Ext. preset value via potentiometer
Counter
High-speed counter
Real-time clock
Data register
File register
Index register
Special register
Pointer
Nestings
Interrupt inputs
Constants
7680
512
4096
320
2
235
6 single phase inputs (max. 60 kHz),
3 double phase inputs (max. 30 kHz)
Year, month, day, hour, minute, second, weekday
8.000
24,000 (ER0~R23999) internal/optional memory
16
512 (D8000-D8511)
2,048
8
6
16 bits: K: -32,768 to +32,767; hex: 0–FFFF
32 bits: K: 2,147,483,648 to +2,147,483,647; hex: 0–FFFF FFFF
MITSUBISHI ELECTRIC 21
///
BASE UNITS
FX3U SERIES
2
The MELSEC FX 3U Series
RAM/EEPROM memory for up to
64,000 PLC program steps gives you plenty of reserve, even for big, complex applications.
Add-in function boards can be installed in the PLC to provide a second RS485 /
RS422 / RS232/USB communications interface for programming or network configurations.
An integrated RUN/STOP switch is available.
Connection possibility for special function adapter modules
Integrated serial interface for direct communication with computers
Integrated high-speed counter for processing fast input signals. For example, you can configure six
100 kHz counters and two 10 kHz counters.
Interrupt processing is also handled via the inputs.
The base units can be expanded to provide configurations with up to 384 inputs and outputs with compact extension units
(total of 384 only by using main unit I/Os, extension unit I/Os and remote I/Os).
Integrated real-time clock with year, month, days and time
Three integrated pulse outputs for frequencies up to 100 kHz with deceleration and acceleration ramps for controlling stepping motors and outputting pulse-width modulated signals .
Description of the Unit Components
Battery cover
Battery
Installation place for
FX3U-7DM
Expansion board dummy cover
RUN/STOP switch
Periphal device connecting connector
Top cover with Model name
(used, if FX3U-7DM is not installed)
Protective cover
Terminal block cover
Input terminals
LEDs for indicating the input status
LEDs for indicating the operating status
Extension device connecting connector cover
LEDs for indicating the output status
Output terminals
Terminal block cover
Protective cover
22 MITSUBISHI ELECTRIC
왎
Base Units
Base Units with 16 I/Os
Integrated inputs/outputs
Power supply
Integrated inputs
Integrated outputs
Output type
Power consumption
Weight
Dimensions (WxHxD)
Order information
8
8
16
24 V DC
Relay
25 W kg 0.6
mm 130x90x86
Art. no. 231498
Base Units with 32 I/Os
Integrated inputs/outputs
Power supply
Integrated inputs
Integrated outputs
Output type
Power consumption
Weight
Dimensions (WxHxD)
Order information
32
24 V DC
16
16
Relay
30 W kg 0.65
mm 150x90x86
Art. no. 231499
FX3U-16
MR/ES
8
8
16
100–240 V AC
Relay
30 VA
0.6
130x90x86
231486
BASE UNITS
FX3U SERIES
///
¨ FX 1S
¨ FX 1N
¨ FX 3G
þ FX 3U
¨ FX 3UC
Base Units FX 3U
The FX 3U series base units are available with 16, 32, 48, 64, 80 or
128 input/output points expandable to 384 points.
It is possible to choose between relay and transistor output type.
Note: Additional special versions are available on request.
앬
앬
앬
앬
Special Features:
앬
앬
앬
앬
Integrated serial interface for communication between PCs and HMI
Integrated positioning control
Exchangeable interface modules for direct mounting into a base unit
LEDs for indicating the input and output status
Slot for memory cassettes
Integrated real-time clock
Expandable with digital I/O modules, special function modules and ADP modules
User-friendly programming systems, including IEC 1131.3
(EN 61131.3) compatible programming software, HMIs and hand-held programming units
2
FX3U-16
MT/DSS
16
24 V DC
8
8
Transistor
(source type)
25 W
0.6
130x90x86
231503
FX3U-16
MT/ESS
16
100–240 V AC
8
8
Transistor
(source type)
30 VA
0.6
130x90x86
231492
FX3U-32
MR/ES
32
100–240 V AC
16
16
Relay
35 VA
0.65
150x90x86
231487
FX3U-32
MT/DSS
32
24 V DC
16
16
Transistor
(source type)
30 W
0.65
150x90x86
231504
FX3U-32
MT/ESS
32
100–240 V AC
16
16
Transistor
(source type)
35 VA
0.65
150x90x86
231493
MITSUBISHI ELECTRIC 23
///
BASE UNITS
FX3U SERIES
2
Base Units with 48 I/Os
Integrated inputs/outputs
Power supply
Integrated inputs
Integrated outputs
Output type
Power consumption
Weight
Dimensions (WxHxD)
Order information
48
24 V DC
24
24
Relay
35 W kg 0.85
mm 182x90x86
Art. no. 231500
48
100–240 V AC
24
24
Relay
40 VA
0.85
182x90x86
231488
FX3U-48
MT/ESS
48
100–240 V AC
24
24
Transistor
(source type)
40 VA
0.85
182x90x86
231494
FX3U-48
MT/DSS
48
24 V DC
24
24
Transistor
(source type)
35 W
0.85
182x90x86
231505
Base Units with 64 I/Os
Integrated inputs/outputs
Power supply
Integrated inputs
Integrated outputs
Output type
Power consumption
Weight
Dimensions (WxHxD)
Order information
64
24 V DC
32
32
Relay
40 W kg 1.0
mm 220x90x86
Art. no. 231501
FX3U-64
MR/ES
64
100–240 V AC
32
32
Relay
45 VA
1.0
220x90x86
231489
FX3U-64
MT/ESS
64
100–240 V AC
32
32
Transistor
(source type)
45 VA
1.0
220x90x86
231495
FX3U-64
MT/DSS
64
24 V DC
32
32
Transistor
(source type)
40 W
1.0
220x90x86
231506
Base Units with 80–128 I/Os
Integrated inputs/outputs
Power supply
Integrated inputs
Integrated outputs
Output type
Power consumption
Weight
Dimensions (WxHxD)
Order information
80
24 V DC
40
40
Relay
45 W kg 1.20
mm 285x90x86
Art. no. 231502
FX3U-80
MR/ES
80
100–240 V AC
40
40
Relay
50 VA
1.20
285x90x86
231490
FX3U-80
MT/DSS
80
24 V DC
40
40
Transistor
(source type)
45 W
1.20
285x90x86
231507
FX3U-80
MT/ESS
80
100–240 V AC
40
40
Transistor
(source type)
50 VA
1.20
285x90x86
231496
FX3U-128
MR/ES
128
100–240 V AC
64
64
Relay
65 VA
1.80
350x90x86
231491
FX3U-128
MT/ESS
128
100–240 V AC
64
64
Transistor
(source type)
65 VA
1.80
350x90x86
231497
24 MITSUBISHI ELECTRIC
BASE UNITS
FX3U SERIES
///
왎
Base Units
Environmental Specifications
Ambient temperature
Protection
Noise durability
Dielectric withstand voltage
Ambient relative humidity
Shock resistance
Vibration resistance
Insulation resistance
Ground
Fuse
Environment
Certifications
¨ FX 1S
¨ FX 1N
¨ FX 3G
0–55 °C (storage temperature: -25–+75 °C)
IP10
1000 Vpp with noise generator; 1 µs at 30–100 Hz
AC PSU: 1500 V AC, 1 min./DC PSU: 500 V AC, 1 min.
5–95 % (non-condensing)
Acc. to IEC 68-2-27: 15G (3 times each in 3 directions for 11 ms)
Acc. to IEC 68-2-6: 1G (resistance to vibrations from 57–150 Hz for 80 minutes along all 3 axes); 0.5G for DIN rail mounting
500 V DC, 5 M
W
Class D: Grounding resistance 100
W or less
From FX3U-16M
첸 to FX3U-32M
첸
: 3.15 A; From FX3U-48M
첸 to FX3U-128M
첸
: 5 A
Avoid environments containing corrosive gases, install in a dust-free location.
Please refer to pages 66–67 in this catalogue
þ FX 3U
¨ FX 3UC
2
Electrical Specifications
Power supply 24 V DC (+20 %/-30 %)
Inrush current at ON
Allowable momentary power failure time
Primary power supply
—
5 ms
24 V DC
External power supply (24 V DC) —
100–240 V AC (+10 %/-15 %),
50/60 Hz
30 A/<5 ms (at 100 V AC);
65 A/<5 ms (at 200 V AC)
10 ms
—
FX3U-16/32MR/ES: 400 mA/
FX3U-48–128MR/ES: 600 mA
Switching voltage (max.)
Max. output current
- per output
- per group*
Type
Transistor modules
V <240 V AC, <30 V DC 5–30 V DC
A 2 0.5 / 0.3
햲
A 8 0.8/1.6
햳
Max. switching current
Response time
- inductive load 80 VA 12 W/7.2 W ms 10 <0.2(Y0,Y1<30 µs)
Life of contacts (switching times)
햴 3,000,000 at 20 VA; 1,000,000 at 35 VA;
200,000 at 80 VA
햲 for Y0 and Y1 = 0.3 A; all others 0.5 A
햴
Not guaranteed by Mitsubishi Electric.
햳
0.8 for 4 per group and 1.6 for 8 per group
* This limitation applies only per reference terminal for each group, 4 and 8 outputs for relays and
2 and 4 outputs for transistors. Please observe the terminal assignments for the group identification.
Programming Specifications
Program data
I/O points (addresses)
Address range
Program memory
Cycle period
Number of instructions
Max. total 384 (with remote I/O)
Max. 256 direct addressing and max. 256 network I/Os
64,000 steps RAM (internal), exchangeable FLROM for easy program exchange
0.065 µs /basic instruction
27 sequence instructions, 2 step ladder instructions,
209 applied instructions
Programming language
Program execution
Program protection
Step ladder, instruction list, SFC
Cyclical execution, refresh mode processing
Password protection with 3 protection levels*
* Protection levels may only be changed with FX-10P/FX-20P/FX-30P.
Operands
Internal relays
Special relays
State relays
Timer
Counter
High-speed counter
High-speed counter speed
Real-time clock
Data register
Extension file register
Index register
Special register
Pointer
Nestings
Interrupt inputs
Constants
7,680
512
4,096
512
235
16
1 phase, 8 points max: 100kHz/6 points
10kHz/2 points
2 phase, 2 points max: 50kHz/2 points
Year, month, day, hour, minute, second, weekday
8,000
32768
16
512
4,096
8
6
16 bits: K: -32768 to +32768, hex: 0–FFFF;
32 bits: K: -2147483648 to +2147483647; hex: 0–FFFF FFFF
MITSUBISHI ELECTRIC 25
2
///
BASE UNITS
FX3UC SERIES
The MELSEC FX 3UC Series
Integrated serial interface for direct communication with computers
Interface adapter connection for
RS232
RS485 / RS422 /
Integrated high-speed counter for processing fast input signals. For example, you can configure six 100 kHz counters and two 10 kHz counters.
Interrupt processing is also handled via the inputs.
Integrated RUN/STOP switch
RAM/EEPROM memory for up to
64,000 PLC program steps gives you plenty of reserve, even for big, complex applications.
The base units can be expanded to provide configurations with up to 384 inputs and outputs with compact extension units
(total of 384 only by using main unit I/Os, extension unit I/Os and remote I/Os).
Three integrated pulse outputs for frequencies up to 100 kHz with deceleration and acceleration ramps for controlling stepping motors and outputting pulse-width modulated signals .
Description of the Unit Components
RUN/STOP switch
LEDs for indicating the operating status
Slot for memory cassettes
Memory cassette
(optional)
Cover for adapter module connection
LEDs for indicating the input status
LEDs for indicating the output status
Protective cover for the extension bus
Extension bus (lateral)
Connection for programming units
26
Back-up battery
Battery cover
Connector for digital outputs
Connector for digital inputs
MITSUBISHI ELECTRIC
BASE UNITS
FX3UC SERIES
///
왎
Base Units
Base Units with 16–96 I/Os
Integrated inputs/outputs
Power supply
Integrated inputs
Integrated outputs
Output type
Power consumption
Weight
Dimensions (WxHxD)
16
24 V DC (+20 %, -15 %)
8
8
Transistor (source type)*
W 6 kg 0.2
mm 34x90x74
Order information Art. no. 231508
* Sink type transistor output units on request.
System Cabling
A choice of terminal blocks with screw or spring terminals are available for easy wiring of the FX3UC modules with standard ribbon cable connectors.
For more details please refer to the
"Accessories" section in this catalogue.
FX3UC-32
MT/DSS
32
24 V DC (+20 %, -15 %)
16
16
Transistor (source type)*
8
0.2
34x90x74
231509
¨ FX 1S
¨ FX 1N
¨ FX 3G
¨ FX 3U
þ FX 3UC
Base Units FX 3UC
The FX 3U series base units are available with 16, 32, 64 or
128 input/output points (expandable to 384 I/Os).
It is possible to choose between relay and transistor output type.
Special Features:
앬
앬
앬
앬
앬
앬
앬
Integrated serial interface for communication between PCs and HMI
Same instruction set as FX3U
Integrated positioning control
Very compact dimensions
LEDs for indicating the input and output status
Slot for memory cassette
앬
앬
Adapter modules and system cabling sets available for units with ribbon cable connectors
Expandable with digital I/O modules, special function modules and ADP modules
User-friendly programming systems, including IEC 1131.3
(EN 61131.3) compatible programming software, HMIs and hand-held programming units
FX3UC-64
MT/DSS
64
24 V DC (+20 %, -15 %)
32
32
Transistor (source type)*
11
0.3
59.7x90x74
231510
96
24 V DC (+20 %, -15 %)
48
48
Transistor (source type)*
14
0.35
85.4x90x74
231511
2
Input terminal block with screw or spring terminals.
.0
.1
.2
.3
.4
.5
.6
.7
Output terminal block with screw or spring terminals. It can be fitted with relay or transistor outputs.
.0
.1
.2
.3
24V+
-
.4
.5
.6
.7
A2A2-
A2A2-
A2A2-
A2A2-
24
V
24
V
24
V
24
V
24
V
24
V
24
V
24
V
MITSUBISHI ELECTRIC 27
///
BASE UNITS
FX3UC SERIES
2
왎
Base Units
Environmental Specifications
Ambient temperature
Protection
Noise durability
Dielectric withstand voltage
Ambient relative humidity
Shock resistance
Vibration resistance
Insulation resistance
Ground
Environment
Certifications
¨ FX 1S
¨ FX 1N
¨ FX 3G
0–55 °C (storage temperature: -25–+75 °C)
IP10
1000 Vpp with noise generator; 1 µs at 30–100 Hz
AC PSU: 1500 V AC, 1 min./DC PSU: 500 V AC, 1 min.
5–95 % (non-condensing)
Acc. to IEC 68-2-27: 15G (3 times each in 3 directions for 11 ms)
Acc. to IEC 68-2-6: 1G (resistance to vibrations from 57–150 Hz for 80 minutes along all 3 axes); 0.5G for DIN rail mounting
500 V DC, 5 MW
Class D: Grounding resistance 100 W or less
Avoid environments containing corrosive gases, install in a dust-free location.
Please refer to pages 66–67 in this catalogue
¨ FX 3U
þ FX 3UC
Electrical Specifications
Power supply 24 V DC (+20 %/-30 %)
Inrush current at ON
Allowable momentary power failure time
—
5 ms
Primary power supply 24 V DC
External power supply (24 V DC) —
28
Switching voltage (max.)
Max. output current
- per output
- per group*
Max. switching current
- inductive load
V 5–30 V DC
A 0.1/0.3
A 0.8/1.6
햲
2.4 W/7.2 W
햳
Response time ms <0.2 (Y0,Y1<30 µs)
Life of contacts (switching times)
햴 햴 3,000,000 at 20 VA; 1,000,000 at 35 VA;
200,000 at 80 VA
햲 for Y0 and Y1 = 0.3 A; all others 0.1 A
햴
Not guaranteed by Mitsubishi Electric.
햳
7.2 W for Y0 to Y3, all other outputs 2.4 W
* This limitation applies only per reference terminal for each group, 4 and 8 outputs for relays and
2 and 4 outputs for transistors. Please observe the terminal assignments for the group identification.
Programming Specifications
Program data
I/O points (addresses)
Address range
Program memory
Cycle period
Number of instructions
Max. total 384 (with remote I/O)
Max. 256 direct addressing and max. 256 network I/Os
64,000 steps RAM (internal), exchangeable FLROM for easy program exchange
0.065 µs/basic instruction
27 sequence instructions, 2 step ladder instructions,
209 applied instructions
Programming language
Program execution
Program protection
Step ladder, instruction list, SFC
Cyclical execution, refresh mode processing
Password protection with 3 protection levels*
* Protection levels may only be changed with FX-30P.
Operands
Internal relays
Special relays
State relays
Timer
Counter
High-speed counter
High-speed counter speed
Real-time clock
Data register
Extension file register
Index register
Special register
Pointer
Nestings
Interrupt inputs
Constants
7,680
512
4,096
512
235
16
1 phase, 8 points max: 100 kHz/6 points
10 kHz/2 points
2 phase, 2 points max: 50 kHz/2 points
Year, month, day, hour, minute, second, weekday
8,000
32768
16
512
4,096
8
6
16 bits: K: -32768 to +32768, hex: 0–FFFF;
32 bits: K: -2147483648 to +2147483647; hex: 0–FFFF FFFF
MITSUBISHI ELECTRIC
왎
Powered Compact Extension Units
COMPACT
EXTENSION
UNITS
///
¨ FX 1S
þ FX 1N
¨ FX 3G
¨ FX 3U
¨ FX 3UC
Extension Units FX 0N
The FX 0N series extension units are available with 40 input/ output points.
It is possible to choose between relay and transistor output type.
Special Features:
앬
앬
앬
LEDs for indicating the input and output status
MELSEC FX 1N series compatible
Integrated service power supply with up to 200 mA capacity
3
FX0N-40
ER-DS
FX0N-40
ET-DSS
Electrical data
Integrated inputs/outputs
AC range (+10 %, -15 %)
Power supply
Frequency at AC
DC range (+20 %, -15 %)
Max. input apparent power
100 V AC
Inrush current at ON
200 V AC
24 V DC
Allowable momentary power failure time
External service power supply (24 V DC)
Inputs
Integrated inputs
Min. current for logical 1
Max. current for logical 0
Response time
Outputs
Integrated outputs
40
100–240 V
Hz 50/60
—
40 VA
30 A/5 ms
50 A/5 ms
— ms 10 mA 200
24 mA 3.5
40
—
—
24 V
20 W
—
—
60 A/50 m s
5
—
24
3.5
mA 1.5
1.5
For all extension units of the MELSEC FX 0N series: 10 ms (at time of shipment)
Output type
Max. switching voltage
Max. output current
- per output
- per group*
Max. switching power
- inductive load
Response time
Life of contacts (switching times)
햳
Mechanical data
Weight
Dimensions (WxHxD)
A 2
A 5
16 16
Relay Relay
Generally for relay version: <240 V AC, <30 V DC; for transistor version: 5–30 V DC
2
5
VA 80 ms 10
40
—
—
24 V
30 W
—
—
60 A/50 m s
24
3.5
1.5
For all extension units of the MELSEC FX 0N series: 3,000,000 at 20 VA; 1,000,000 at 35 VA; 200,000 at 80 VA (only for relay output) kg 0.75
mm 150x90x87
80
10
0.75
150x90x87
5
—
16
Transistor
0.5
0.8
12
<0.2
0.75
햲
150x90x87
55954 Order information Art. no. 60012 55955
햲
0.8 for 4 per group
햳
Not guaranteed by Mitsubishi Electric.
* This limitation applies only per reference terminal for each group. Please observe the terminal assignments for the group identification.
MITSUBISHI ELECTRIC 29
3
///
COMPACT
EXTENSION
UNITS
왎
Powered Compact Extension Units ¨ FX 1S
þ FX 1N
þ FX 3G
þ FX 3U
þ FX 3UC
Extension Units FX 2N
The FX 2N series extension units are available with 32 or
48 input/output points.
It is possible to choose between relay and transistor output type.
Special Features:
앬
앬
앬
앬
LEDs for indicating the input and output status
MELSEC FX 1N /FX 3G and FX 3U series compatible
Detachable terminal blocks
Integrated service power supply with 250 mA or 460 mA
FX2N-32
ET-ESS/UL
FX2N-48
ER-DS
FX2N-48
ER-ES/UL
FX2N-48
ET-DSS
Electrical data
Integrated inputs/outputs
AC range (+10 %, -15 %)
Power supply frequency at AC
DC range (+20 %, -30 %)
Max. input apparent power
Inrush current at ON
100 V AC
200 V AC
Allowable momentary power failure time
32
100–240 V
Hz 50/60
—
35 VA
40 A <5 ms
60 A <5 ms ms 10
32
100–240 V
50/60
—
35 VA
40 A <5 ms
—
10
48
—
—
24 V
30 W
—
—
5
48
100–240 V
50/60
—
45 VA
40 A <5 ms
60 A <5 ms
10
48
—
—
24 V
30 W
40 A < 5 ms
60 A < 5 ms
5
External service power supply (24 V DC) mA 250
Power supply int. bus (5 V DC)
Inputs mA 690
Integrated inputs
Min. current for logical 1
Max. current for logical 0
16 mA 3.5
mA 1.5
250
690
16
3.5
1.5
—
690
24
3.5
1.5
For all extension units of the MELSEC FX 2N series: 10 ms (at time of shipment) Response time
Outputs
Integrated outputs
Output type
Switching voltage (max.)
Max. output current
- per output
- per group *
Max. switching power
- inductive load
Response time
Life of contacts (switching times)
햲
A 2
A 8
16
Relay
16
Transistor
(source)
24
Relay
24
Relay
Generally for relay version: <264 V AC, <30 V DC; for transistor version: 5–30 V DC
0.5
0.8/1.6
햳
2
8
2
8
W 80 ms 10
12
<0.2
80
10
460
690
24
3.5
1.5
80
10
—
690
24
3.5
1.5
24
Transistor
(source)
0.5
0.8/1.6
12
<0.2
햳
For all extension units of the MELSEC FX 2N series: 3,000,000 at 20 VA; 1,000,000 at 35 VA; 200,000 at 80 VA (for relay output only)
Mechanical data
Weight
Dimensions (WxHxD) kg 0.65
mm 150x90x87
0.65
150x90x87
0.85
182x90x87
0.85
182x90x87
0.85
182x90x87
Order information Art. no. 65568 65569 66633 65571
햲
Not guaranteed by Mitsubishi Electric
햳
0.8 for 4 per group and 1.6 for 8 per group
* This limitation applies only per reference terminal for each group. Please observe the terminal assignments for the group identification.
66634
FX2N-48
ET-ESS/UL
24
3.5
1.5
10
460
690
48
100–240 V
50/60
—
45 VA
40 A <5 ms
60 A <5 ms
24
Transistor
(source)
0.5
0.8/1.6
햳
12
<0.2
0.85
182x90x87
65572
30 MITSUBISHI ELECTRIC
왎
Unpowered Modular Extension Blocks
2
IN
OUT
MODULAR
EXTENSION
UNITS
///
¨ FX 1S
þ FX 1N
þ FX 3G
þ FX 3U
þ FX 3UC
Extension Blocks FX 2N
The FX 2N series modular extension blocks are available with
8 or 16 input/output points.
It is possible to choose between relay and transistor output type.
Special Features:
앬
앬
앬
앬
LEDs for indicating the input and output status
MELSEC FX 1N /FX 3G and FX 3U series compatible
Very compact dimensions
Vertically terminal blocks with a cable guide to the upper or lower side
3
FX2N-8EX-ES
FX2N-16EYR-ES/UL
OUT
FX2N-8
EX-ES/UL
FX2N-8
EYR-ES/UL
FX2N-8
EYT-ESS/UL
FX2N-16
EYR-ES/UL
Electrical data
Integrated inputs/outputs
Nbr. of occupied I/O points in the PLC
Power supply
Inputs
Integrated inputs
Min. current for logical 1
Max. current for logical 0
Response time
Outputs
Integrated outputs
Output type
Max. switching voltage
Max. output current
- per output
- per group
햲
Max. switching power
- inductive load
Response time
Life of contacts (switching times)
햳
Mechanical data
Weight
Dimensions (WxHxD)
8
16
4 mA 3.5
mA 1.5
4
Relay
8
8
Generally for relay version: <240 V AC, <30 V DC; for transistor version: 5–30 V DC
A 2
A 8 kg 0.2
mm 43x90x87
8
8
8
3.5
1.5
—
—
—
—
0.2
43x90x87
8
8
All modular extension blocks are supplied by the base unit.
—
—
—
8
Relay
2
8
0.2
43x90x87
—
—
—
For all extension blocks of the MELSEC FX 2N series: 10 ms (at time of shipment)
8
Transistor
0.5
0.8
0.2
43x90x87
Order information Art. no. 166285 166284 166286 166287
햲
This limitation applies only per reference terminal for each group. Please observe the terminal assignments for the group identification.
햳
Not guaranteed by Mitsubishi Electric
16
16
16
3.5
1.5
—
—
—
—
VA 80 — 80 12 — 80 ms 10 10 10 <0.2
— 10
For all extension units of the MELSEC FX 2N series: 3,000,000 at 20 VA; 1,000,000 at 35 VA; 200,000 at 80 VA (for relay output only)
0.3
40x90x87
65776
16
16
—
—
—
16
Relay
2
8
0.3
40x90x87
65580
FX2N-16
EYT-ESS/UL
16
16
—
—
—
16
Transistor
(source)
0.5
1.6
12
<0.2
0.3
40x90x87
65581
MITSUBISHI ELECTRIC 31
3
///
MODULAR
EXTENSION
UNITS
왎
Modular Extension Units
POWER
X0
1
X4
5
6
7
2
3
X0
1
X4
5
2
3
6
7
3
X4
1
2
5
6
7
X0
1
2
3
X4
7
X0
5
6
FX -32EX
-DS
FX2NC-32EX-DS
PW
Y0
1
Y0
1
6
7
2
Y4
5
2
3
3
Y4
5
6
7
¨ FX 1S
¨ FX 1N
¨ FX 3G
¨ FX 3U
þ FX 3UC
Extension Units FX 2NC
The modular extension units of the FX 2NC series can be used in combination with FX 3UC series base units only. They are available with 16 or 32 input/output points. For modules with 16 outputs it is possible to choose between relay and transistor output type.
Note: These modules can be used in combination with a FX3UC PLC only!
Special Features:
앬
앬
앬
Very compact dimensions
LEDs for indicating the input and output status
Removable terminal blocks for FX 2NC -16EYR-T-DS and
FX 2NC -16EX-T-DS (interchangeable against optional spring terminal blocks)
앬 Adapter modules and system cabling sets are optionally available for units with ribbon cable connectors (transistor output types)
FX2NC-16EYR-DS
FX2NC-32
EX-DS
FX2NC-32
EYT-DSS
Electrical data
Integrated inputs/outputs
Power supply
Inputs
Integrated inputs
Input current X0
®
X7 / X10
®¥
Min. current for logical 1
X0
®
X7 / X10
®¥
Max. current for logical 0
Isolation
Response time
Outputs
Integrated outputs
Output type
Max. switching voltage
Max. output current
- per output
- per group*
Max. switching power
- inductive load
- lamp load
Response time
Life of contacts (switching times)
Mechanical data
Connection type
Weight
Dimensions (WxHxD)
16
16
7/5 mA 4.5/3.5
—
—
—
16
7/5
4.5/3.5
—
—
—
32
7/5
4.5/3.5
—
—
— mA 1.5
— 1.5
— 1.5
—
Photocoupler isolation between input terminals and PC power for all base units
For all extension units of the MELSEC FX 2NC series: 10 ms (at time of shipment), partly adjustable between 0 and 60 ms in 1 ms steps (REFF, FNC51 = 0–60 ms)
A —
A —
VA —
W — ms —
—
16
16
Relay
2
4/8
80
100
10 like base unit
16
All modular extension blocks are supplied by the base unit.
—
—
—
—
16
Transistor
V Generally for relay version: <240 V AC, <30 V DC; for transistor version: 5–30 V DC
Removable screw terminal blocks kg 0.2
mm 20.2x90x89
0.2
24.2x90x89
—
—
—
—
—
—
16
0.1/0.3
햲
0.8
2.4/7.2
햳
0.3/0.9
햴
<0.2
—
32
—
—
—
—
—
—
—
—
32
32
Transistor
0.1/0.3
0.8
2.4/7.2
햳
0.3/0.9
햴
<0.2
—
햲
Ribbon cable connector Ribbon cable connector Ribbon cable connector Ribbon cable connector
0.15
14.6x90x87
0.2
14.6x90x87
0.2
26.2x90x87
0.2
26.2x90x87
104505 104506 Order information Art. no. 128152 128153 104503 104504
햲
0.3A for Y0 to Y1; 0.1 A all others
햳
7.2 W for Y0 to Y3; 2.4 W all others
햴
0.9 W for Y0 to Y3; 0.3 W all others
* This limitation applies only per reference terminal for each group. Please observe the terminal assignments for the group identification.
32 MITSUBISHI ELECTRIC
ANALOG
MODULES
///
왎
Analog Output Modules
FX2N-2DA
FX3U-4DA
24 V
D/A
¨ FX 1S
þ FX 1N
þ FX 3G
þ FX 3U
þ FX 3UC
FX 2N -2DA, FX 2N
-4DA, FX
3U
-4DA
The analog output modules provide the user with 2 to 4 analog outputs. The modules convert digital values from the FX 1N /FX 3G /FX 3U controller to the analog signals required by the process. The module can output both current and voltage signals.
Note: The FX 3U -4DA can only be used in combination with a FX3G/FX3U series base unit.
Analog channels
Analog output range voltage
Resolution current
Fullscale overall accuracy
Power supply
5 V DC
24 V DC
Related I/O points
Weight
Dimensions (WxHxD) inputs outputs
—
2
0 –+10 V DC/
0–+5 V DC/
4–+20 mA
2.5 mV (12 bits)
4 µA (12 bits)
±1 %
30 mA (from base unit)
85 mA
8 kg 0.3
mm 43x90x87
Order information Art. no. 102868
* Dependent on the ambient temperature
FX2N-4DA
—
4
-10 –+10 V DC/
0 –+20 mA/
4–+20 mA
5 mV (10 bits)
20 µA (11 bits + sign)
±1 %
30 mA (from base unit)
200 mA
8
0.3
55x90x87
65586
FX3U-4DA
—
4
-10 –+10 V DC/
0 –+20 mA/
4–+20 mA
0.32 mV (16 bits +sign)
0.63 µA (15 bits)
±0.3–0.5 %*
100 mA (from base unit)
160 mA
8
0.2
55x90x87
169509
4
왎
Analog Input Modules
FX 2N
-2AD
POWER
MITSUBISHI
POWER
24V
¨ FX 1S
þ FX 1N
þ FX 3G
þ FX 3U
þ FX 3UC
FX 2N -2AD, FX 2N -4AD, FX 3U -4AD, FX 2N -8AD
The analog input modules provide the user with 2 to 8 analog inputs. The module converts analog process signals into digital values which are further processed by the
MELSEC FX 1N /FX 3G /FX 3U controller.
The actual values or mean values over several measurements may be output.
Note: The FX 3U -4AD can only be used in combination with a FX3G/FX3U series base unit.
Analog channels
Analog input range
Resolution inputs outputs voltage current
Fullscale overall accuracy
Power supply
Related I/O points
Weight
Dimensions (WxHxD)
5 V DC
24 V DC
2
—
0 –+10 V DC/
0–+5 V DC/
0/ 4–+20 mA
2.5mV, 1.25mV/
4 µA (12 bits)
±1 %
20 mA
(from base unit)
50 mA
(from base unit)
8 kg 0.3
mm 43x90x87
FX2N-4AD
4
—
-10–+10 V DC/
-20–+20 mA/
4–+20 mA
5 mV
(11 bits + sign)
20 µA
(10 bits + sign)
±1 %
30 mA
(from base unit)
55 mA
8
0.3
55x90x87
FX3U-4AD
4
—
-10 –+10 V DC/
-20–+20 mA/
4–+20 mA
0.32 mV
(16 bits + sign)
1.25 µA
(15 bits + sign)
±0.3–1 %*
110 mA
(from base unit)
90 mA
8
0.2
55x90x87
FX3UC-4AD
4
—
-10–+10 V DC/
-20–+20 mA/
8
4–+20 mA
0.32 mV
(16 bits + sign)
1.25 µA
(15 bits + sign)
±0.3–1 %*
100 mA
(from base unit)
80 mA
0.13
20.2x90x79
FX2N-8AD
8
—
-10 –+10 V DC/
-20–+20 mA/
4–+20 mA
0.63 mV
(14 bits + sign)
2.5 µA
(13 bits + sign)
±0.3–0.5 %*
50 mA
(from base unit)
80 mA
8
0.4
75x105x75
Order information Art. no. 102869 65585 169508 210090 129195
*Dependent on the ambient temperature
Note: The FX 2N -8AD can be configured to accept standard analog inputs as well as selected temperature inputs such as K, T or J type thermocouples.
MITSUBISHI ELECTRIC 33
///
ANALOG
MODULES
4
왎
Combined Analog I/O Modules ¨ FX 1S
þ FX 1N
þ FX 3G
þ FX 3U
þ FX 3UC
FX 0N -3A, FX 2N -5A, FX 3U -3A-ADP
The analog input/output modules are available in two different models. They provide the user with 2 or 4 analog inputs and 1 analog output. They serve for conversion of analog process signals into digital values, and vice versa.
As of the FX 2N -5A module the analog inputs can be selected between current or voltage input signals.
Note: The FX 2N -5A may not be used in combination with a FX 1N series base unit.
FX0N-3A
FX2N-5A
24 V
AD / DA
Number of analog points
Input (resolution)
Output (resolution)
Total accuracy
Power supply inputs outputs voltage current voltage current
5 V DC
24 V DC
2
1
0–+10 V (8 bit),
0–+5 V (8 bit)
0/4–+20 mA (8 bit)
Related I/O points
Weight
Dimensions (WxHxD)
Order information Art. no. 41790
*Dependent on the ambient temperature
0–+10 V (8 bit),
0–+5 V (8 bit)
4–+20 mA (8 bit)
±
1 %
30 mA (from base unit)
90 mA (from base unit)
8 kg 0.2
mm 43x90x87
FX2N-5A
4
1
FX3U-3A-ADP
2
1
-10–+10 V (15 bit + sign),
-100–+100 mV (11 bit + sign) 0–+10 V (2.5 mV/12 bit)
-20–+20 mA (14 bit + sign),
0/4–+20 mA (14 bit)
4–+20 mA (5 µA/12 bit)
-10–+10 V (12 bit) 0–+10 V (2.5 mV/12 bit))
0/4–+20 mA (10 bit)
±0.3–1 %*
70 mA (from base unit)
90 mA
8
0.3
55x90x87
4–+20 mA (4 µA/12 bit)
±0.5–1 %*
20 mA (from base unit)
90 mA
0
0.1
17.6x90x89.5
153740 221549
왎
Analog Temperature Input Modules
¨
FX 1S
þ
FX 1N
þ
FX 3G
þ
FX 3U
þ
FX 3UC
FX 2N -4AD-TC, FX 2N -4AD-PT, FX 2N -2LC
The analog input module for thermocouples FX 2N -4AD-TC is used for processing temperatures. It has 4 independent inputs for detecting signals from thermocouples of types J and K. The type of thermocouple can be chosen independently for each point.
The analog input module for Pt100 inputs FX 2N -4AD-PT permits the connection of four
Pt100 sensors to the FX 2N /FX 3U series controller.
The temperature control module FX 2N -2LC is equipped with two temperature input points and two transistor (open collector) output points. It is used to read temperature signals from thermocouples and Pt100 sensors, and performs PID output control
Note: The FX2N-2LC may not be used in combination with a FX1N series base unit.
A / D
Analog inputs
Compensated temperature range
Digital outputs
Resolution
Total accuracy
Power supply
Related I/O points
Weight
Dimensions (WxHxD)
Order information
5 V DC
24 V DC
4 (J or K type)
FX2N-4AD-PT
4 (Pt100 sensors)
-100–+600
-1000–+6000 (J type)/
-1000–+12000 (K type)
-1,000–6,000
(12 bit conversion)
0.3 (J type) / 0.4 (K type) 0.2–0.3 °C
±0.5 % fullscale +1 °C
40 mA (from base unit)
60 mA
8 kg 0.3
mm 55x90x87
Art. no. 65588
±1. 0 % fullscale
30 mA (from base unit)
50 mA
8
0.3
55x90x87
65587
FX2N-2LC
2 points
Thermocouple and
Pt100 sensor
2 transistor output points
0.1 °C or 1 °C
±0.7 % fullscale
(±0.3 % when ambient temperature is 23 °C ±5 °C)
70 mA (from base unit)
55 mA
8
0.3
55x90x87
129196
34 MITSUBISHI ELECTRIC
ANALOG
MODULES
///
왎
Analog Temperature Input Adapters
FX 3U
-4AD-TC-ADP
POWER
FX 3U -4AD-PT-ADP
POWER
¨ FX 1S
¨ FX 1N
¨ FX 3G
þ FX 3U
þ FX 3UC
FX 3U -4AD-TC-ADP, FX 3U -4AD-PT-ADP, FX 3U -4AD-PTW-ADP, FX 3U -4AD-PNK-ADP
The analog input adapter for thermocouples FX 3U -4AD-TC-ADP is used for processing temperatures. It has 4 independent inputs for detecting signals from thermocouples of types J and K.
The FX 3U -4AD-PNK-ADP analog input adapter enables the connection of up to four
Pt1000/Ni1000 thermocouples.
The FX 3U -4AD-PT-ADP and FX 3U -4AD-PTW-ADP analog input adapters enable the connection of up to four Pt100 thermocouples to the PLC system.
All analog adapters can be used in combination with the base units of the
FX 3G /FX 3U /FX 3UC series only.
Note: When connecting the analog adapters to a FX3U base unit, a communications adapter is required.
A direct connection without adapter is possible if these modules are connected to a FX3UC base unit.
When connecting an adapter to a FX3G PLC the communications adapter FX3G-CNV-ADP is required.
FX3U-4AD-TC-ADP
FX3U-4AD-PT-ADP
Analog inputs
Compensated temperature range
Digital outputs
Resolution
Total accuracy
Power supply
Related I/O points
Weight
Dimensions (WxHxD)
5 V DC
24 V DC
4 (J or K type)
-1000–+6000(Jtype)/
FX3U-4AD-PT-ADP FX3U-4AD-PTW-ADP FX3U-4AD-PNK-ADP
4 (Pt100 sensors)
-1000–+10000(Ktype) -500–+2500
4 (Pt100 sensors,
3-wire)
-100–+600
-1000–+6000
(Pt1000/Ni1000 sensors, 2/3 wire)
-50–+250 (Pt1000)/
-40–+110 (Ni1000)
-500–+2500 (Pt1000)/
-400–+1100 (Ni1000)
0.1
0.2–0.3
0.1
±0.5 % fullscale ±0.5–1.0 % fullscale*
15 mA (from base unit) 15 mA (from base unit) 15 mA (from base unit) 15 mA (from base unit)
45 mA 50 mA 50 mA 45 mA
0 kg 0.1
mm 17.6x90 (106)x89.5
Order information Art. no. 165273
*Dependent on the ambient temperature
0
0.1
165272
0
0.1
214173
0
0.1
214172
4
왎
Analog I/O Adapters
FX3U-4AD-ADP
¨
FX 1S
¨
FX 1N
¨
FX 3G
þ
FX 3U
þ
FX 3UC
FX 3U -4AD-ADP, FX 3U -4DA-ADP
The FX 3U -4AD-ADP adapter module for analog input is a special function adapter to add four analog input points to the FX 3G /FX 3U /FX 3UC PLC system.
The FX 3U -4DA-ADP adapter module for analog output is a special function adapter to add four analog output points to the FX 3G /FX 3U /FX 3UC PLC system.
Note: When connecting the analog adapters to a FX3U base unit, a communications adapter is required.
A direct connection without adapter is possible if these modules are connected to a FX3UC base unit.
When connecting an adapter to a FX3G PLC the communications adapter FX3G-CNV-ADP is required.
FX
3U
-4DA-ADP
POWER
FX3U-4DA-ADP
Analog channels inputs outputs
Analog range
Resolution
Overall accuracy
Power supply
Related I/O points
Weight
Dimensions (WxHxD)
5 V DC
24 V DC
4
—
0–+10 V DC, 4–+20 mA
2.5 mV/10 µA (12 bit/11 bit )
±0.5 %*/±1 %
15 mA (from base unit)
40 mA
0 kg 0.1
mm 17.6x90 (106)x89.5
Order information Art. no. 165241
*Dependent on the ambient temperature and signal quality
—
4
0–+10 V DC, 4–+20 mA
2.5 mV/4 µA (12 bit)
±0.5 %*/±1 %
15 mA (from base unit)
150 mA
0
0.1
17.6x90 (106)x89.5
165271
MITSUBISHI ELECTRIC 35
///
TEMPERATURE
CONTROL
/DATA
LOGGER
4
왎
Temperature Control Module ¨ FX 1S
¨ FX 1N
þ FX 3G
þ FX 3U
þ FX 3UC
Temperature control module
The temperature control module FX3U-4LC is equipped with four temperature input points and four transistor (open collector) output points. It is used to read temperature signals from thermocouples and Pt100 sensors, and performs PID output control.
The proportional band, the integral time and the derivative time can be easily set by auto tuning.
The channels are isolated against each other.
24 V
OUT1
OUT2
OUT3
OUT4
Analog inputs
Compensated temperature range
Digital outputs
Resolution
Total accuracy
Power supply
Related I/O points
Dimensions (WxHxD)
5 V DC
24 V DC
Order information
4 (Thermocouple and Pt100 sensors)
°C -200 to +2300
4 NPN transistor open collector output points
°C 0.1 or 1
±0.3 to 0.7 % (fullscale, dependent on the ambient temperature)
160 mA (from base unit)
50 mA
8 mm 90x90x86
Art. no. 232806
왎
Data Logger Module
FX
3U
-CF-ADP
POWER
BUFFER
ERR.
CF CARD
ACCESS
ON
FULL
ACCESS
SLOT
OFF
¨
FX 1S
¨
FX 1N
¨
FX 3G
þ
FX 3U
þ
FX 3UC
Data logger module
The FX3U-CF-ADP is a general purpose data logging adapter. The difference to other available logging units is that the PLC main unit controls the data logging based on user requirements, e.g. periodical or even based. For tracing a timestamp is automatically added to all data storages, that eases alarm and other time critical logging. Another usage is the storage of bigger recipe data. A CompactFlash 쏐 memory card up to 2GB can be used. Six applied instructions allow all kinds of data writing, manipulation or reading, making this adapter the optimum solution towards customer requirements.
Data access method
Connectable units
Time stamp function
Recommended storage media
Max. file size
File format
Max. numbers of files
FIFO function
Power supply 24 V DC
Related I/O points
Dimensions (WxHxD)
Controlled by the main unit, no polling from the logging unit possible.
A maximum of one FX3U-CF-ADP can be connected per PLC.
The real time clock data of the base unit is used.
CompactFlash
쏐 memory card (GT05-MEM-256MC, -512MC,-1GC, -2GC)
512 MB
CSV
63 (Plus one FIFO file.)
One pattern (The file name gets automatically generated.)
130 mA
0 mm 45x90x89.5
Order information Art. no. 230104
36 MITSUBISHI ELECTRIC
HIGH
SPEED
COUNTER
///
왎
High-Speed Counter Modules ¨ FX 1S
¨ FX 1N
¨ FX 3G
þ FX 3U
þ FX 3UC
FX 2N -1HC, FX 2NC -1HC
In addition to the internal high-speed MELSEC FX counters, the high-speed counter modules FX 2N -1HC and FX 2N c-1HC provide the user with an external counter. It counts 1- or
2-phase pulses up to a frequency of 50 kHz. The counting range covers either 16 or 32 bit.
The two integrated transistor outputs can be switched independently of one another by means of internal comparison functions. Hence, simple positioning tasks can also be realized economically. In addition, the FX 2N -1HC and FX 2Nc -1HC can be used as a ring counter.
Signal level
Counter inputs
Max. counting frequency
Input format
Type of counter
Counting range
Output type
Power supply
Related I/O points
Weight
Dimensions (WxHxD)
5 V DC
24 V DC
5, 12, 24 V DC/7 mA
2 (1 phase) or 1 (2 phase) kHz 50 bit 16, 32
Up/down counter, ring counter
16 bit 0–65535
32 bit -2147483648–+2147483647
2 x transistor (5–24 V DC; 0.5 A)
90 mA (from base unit)
—
8 kg 0.3
mm 55x90x87
Order information Art. no. 65584
5, 12, 24 V DC/7 mA
2 (1 phase) or 1 (2 phase)
50
16, 32
Up/down counter, ring counter
0–65535
-2147483648–+2147483647
2 x transistor (5–24 V DC; 0.5 A)
90 mA (from base unit)
—
8
0.13
20.2x90x89
217916
4
왎
High-Speed Counter Adapters
FX
3U
-2HSX-ADP
POWER
X0/3 X2/5
X1/4 X6/7
¨
FX 1S
¨
FX 1N
¨
FX 3G
þ
FX 3U
þ
FX 3UC
FX 3U -4HSX-ADP, FX 3U -2HSY-ADP, FX 3U -2HC
These adapter modules allow direct processing of positioning application data.
The FX 3U -4HSX-ADP and the FX 3U -2HC provide high speed counter inputs up to 200 kHz while the FX 3U -2HSY-ADP delivers 2 channels of pulse train outputs up to 200 kHz.
Note: The adapters FX3U-
첸
-ADP can only be used with the FX3U and they require a function extension board.
FX3U-4HSX-ADP
FX
3U
-2HSY-ADP
POWER
Y0/2 Y1/3
Y4/6 Y5/7
FP.RP
PLS DIR
FX3U-2HSY-ADP
Counter
Max. counting frequency
Input format
Output format
Maximum cable length
Input potential
Output load
Maximum connectivity
Power supply
5 V DC
24 V DC
Related I/O points
Weight
Dimensions (WxHxD)
Order information inputs 4 outputs inputs kHz
—
1 ch 1 input or
1 ch 2 inputs: 200
2 ch 2 inputs: 100 outputs kHz —
Differential line receiver
(AM26C32 is suitable)
Photocoupler isolation on inputs
— m 10
5 V DC
—
2
30 mA (from base unit)
30 mA (from base unit)
0 kg 0.08
mm 17.6x90 (106)x89.5
Art. no. 165274
FX3U-2HSY-ADP
—
2
—
200
—
Differential line driver
(AM26C31 is suitable)
Normal rotation pulse train, reverse pulse train or pulse train + one
10
— less than 25 mA
2
30 mA (from base unit)
60 mA (from base unit)
0
0.08
17.6x90 (106)x89.5
165275
FX3U-2HC
2
—
1 phase input: 200
2 phase input: 200/100/50
—
Differential line receiver
(AM26C32 is suitable)
Photocoupler isolation on inputs
Transistor output, 5–24 V DC
When the counter value coincides with an output compare value, the appropriate output is set ON.
10
5/12/24 V DC
0.5 A
8
245 mA (from base unit)
—
8
0.08
55x90x87
232805
MITSUBISHI ELECTRIC 37
///
POSITIONING
MODULES
4
왎
Positioning Modules
FX 2N
-10PG
START
DOG
X0
X1
øA
øB
POWER
ERROR
PGO
FP
RP
CLR
¨ FX 1S
¨ FX 1N
¨ FX 3G
þ FX 3U
þ FX 3UC
FX 2N -1PG-E, FX 2N -10PG
The positioning modules FX 2N -1PG-E and FX 2N -10PG are extremely efficient single-axis positioning modules for controlling either step drives or servo drives (by external regulator) with a pulse chain. They are very suitable for achieving accurate positioning in combination with the MELSEC FX series. The configuration and allocation of the position data are carried out directly via the PLC program. A very wide range of manual and automatic functions are available to the user.
Accessible axes
Output frequency
Signal level for digital inputs
Power supply
5 V DC
24 V DC
Related I/O points
Weight
Dimensions (WxHxD)
Order information
1 pulse/s 10–100 000
24 V DC/40 mA
55 mA (from base unit)
—
8 kg 0.3
mm 43x90x87
Art. no. 65583
FX2N-10PG
1
1–1 000 000
5 V DC/100 mA; 24 V DC/70 mA
120 mA (from base unit)
—
8
0.2
43x90x87
140113
왎
Positioning Module for SSCNET
INT 0
INT 1
A
B
START
DOG
INT 0
INT 1
A
B
X READY
Y READY
X ERROR
Y ERROR
POWER
¨ FX 1S
¨ FX 1N
¨ FX 3G
þ FX 3U
þ FX 3UC
SSCNET III Module FX 3U -20SSC-H
The SSCNET module FX 3U -20SSC-H can be used in combination with a FX 3U programmable controller to achieve a cost effective solution for high precision, high speed positioning. The plug-and-play fiber optic SSCNET cabling reduces setup time and increases control distance for positioning operations in a wide range of applications.
Servo parameters and positioning information for the FX 3U -20SSC-H are easily set up with an FX 3U base unit and a personal computer. For parameter setting, monitoring and testing the easy programming software FX Configurator-FP is available.
Note: the FX 3U -20SSC-H can be used in combination with a FX3U- or FX3UC base unit only. Please refer to the Mitsubishi Electric MELSERVO catalog for suitable servo motors and amplifiers.
FX2 CU -20SSC-H
Accessible axes
Output frequency
Pulse output format
Communications speed
Starting time
Max. to PLC connectable modules
Status displays
Power supply
5 V DC
24 V DC
Related I/O points
Weight
Dimensions (WxHxD)
Order information
2 (independent or interpolation)
1 Hz to 50 MHz
SSCNET III (servo bus)
50 Mbps ms 1.6 (+1.7 SSCNET cycle time)
Up to 8 can be connected to the FX3U PLC
Power, module status, axis status, error
100 mA
—
8 kg 0.3
mm 55x90x87
Art. no. 168914
38 MITSUBISHI ELECTRIC
NETWORK
MODULES
///
왎
Network Modules for CC-Link
RUN
ERR.
MST
TEST 1
TEST 2
L RUN
L ERR.
SW
M/S
PRM
TIME
LINE
SD
RD
CCLINK
¨ FX 1S
þ FX 1N
þ FX 3G
þ FX 3U
þ FX 3UC
CC-Link Master Module FX 2N -16CCL-M
The CC-Link network enables the controlling and monitoring of decentralized I/O modules at the machine.
The CC-Link master module FX2N-16CCL-M is a special extension block which assigns an
FX series PLC as the master station of the CC-Link system.
The setting of all modules within the network is handled directly via the master module.
Up to 15 remote stations and remote device stations can be connected to the master station as decentralized I/O stations. These remote stations can be up to 7 I/O modules and up to 8 remote device stations. 2 master modules can be connected to one FX
1N
, FX 3G or
FX 3U /FX3 UC base unit.
The maximum communications distance is 1200 m without repeater.
Note: When connecting this module to a FX3UC base unit, the communications adapter FX2N-CNV-IF resp. a power supply unit FX3UC-1PS-5V is required. For more informations about CC-Link please refer to the "Automation Book".
Module type
Link points per station
Max. number of I/O points
Number of connectable modules
5 V DC
Power supply
24 V DC
Related I/O points
Weight
Dimensions (WxHxD)
Master station
I/O points 32 register 8
128 (with FX1N PLC), 256 (with FX3G PLC)*, 384 (with FX3U PLC)*
Max. 15
—
150 mA
8
0.4
85x90x87
Order information
*Including I/O points in PLC and network.
Art. no. 133596
4
RUN
ERR.
L RUN
L ERR.
SD
RD
POWER
FX
3U
-64CCL
FX3U-64CCL Interface Block
The FX3U-64CCL CC-Link interface block is available for FX3 series main units and enables
CC-Link V2 functionality, for example expanded cyclic transmission which facilitates handling of multiple data processes.
Note: When attaching the FX3U-64CCL to an FX3UC main unit, the FX2NC-CNV-IF interface converter or the FX3UC-1PS-5V power supply unit is required. For more informations about CC-Link please refer to the
"Automation Book".
Module type
Link points per station
Max. transmission speed
Related I/O points
Power supply
Weight
Dimensions (WxHxD)
Order information
Intelligent device station
I/O points 128 (Occupying 1 station with Octuple expanded cyclic setting) register 32 (Occupying 1 station with Octuple expanded cyclic setting)
10 Mbps
8
24 V DC/220 mA
0.3
55x90x87
Art. no. 217915
MITSUBISHI ELECTRIC 39
///
NETWORK
MODULES
4
왎
Network Modules for CC-Link ¨ FX 1S
þ FX 1N
þ FX 3G
þ FX 3U
þ FX 3UC
CC-Link Communication Module FX 2N -32CCL
The communication module FX 2N -32CCL enables the user to connect to the CC-Link network with a superior PLC system as master CPU. This gives him access to the network of all MELSEC PLC systems and frequency inverters and to additional products from other suppliers.
Thus the network is expandable via the digital inputs/outputs of the FX modules to a maximum of 256 I/Os.
The buffer memory of the FX
2N
-32CCL is read and written by FROM/TO instructions.
The connection is to the extension bus on the right side of the controller.
Note: For more informations about CC-Link please refer to the "Automation Book".
LRUN • LERR • RD • SD
Module type
Link points per station
Max. number of I/O points
Number of connectable modules
5 V DC
Power supply
24 V DC
Related I/O points
Weight
Dimensions (WxHxD)
Order information
Remote station
I/O points 32 register 8
—
— max. 130 mA (from base unit)
50 mA
8
0.3
43x90x87
Art. no. 102961
왎
Network Module for AS-Interface
¨
FX 1S
þ
FX 1N
þ
FX 3G
þ
FX 3U
þ
FX 3UC
AS-Interface Module FX 2N -32ASI-M
The FX 2N -32ASI-M serves as master module for the connection of the FX 1N , FX 3G , FX 3U and FX 3UC PLC to the AS-Interface system. Up to 31 slave units with up to 4 inputs and
4 outputs can be controlled.
U ASI
ASI ACTIVE
ADRESS/ERROR
POWER
PRJ MODE
PRG ENABLE
FROM/TO
CONFIG ERR
Module type
Max. number of I/O points
Communication protocol
Communication speed
Method
Communication cable
Total extension distance
Max. number of controllable units
I/O refresh time
Network setup
Display
Power supply
Related I/O points
Weight
Dimensions (WxHxD)
5 V DC
24 V DC
FX2N-32ASI-M
Master module
128 (with FX1N PLC); 256 (with FX3G PLC); 384 (with FX3U/FX3UC PLC)*
AS-Interface standard kbps 167
APM method (Alternating Pulse Modulation)
AS-Interface standard cable
Up to 31 slave modules (up to 4 inputs / 4 outputs per slave)
Max. 5 ms
2 key network setup
7-segment display for status and diagnosis messages
150 mA (from base unit)
70 mA external
8 kg 0.2
mm 55x90x87
Order information
*Including I/O points in PLC and network.
Art. no. 103314
40 MITSUBISHI ELECTRIC
NETWORK
MODULES
///
왎
Network Module for Ethernet
POWER
LINK
ACT
SD
RD
þ FX 1S
þ FX 1N
¨ FX 3G
¨ FX 3U
¨ FX 3UC
Ethernet Communications Adapter FX 2NC -ENET-ADP
The FX 2NC -ENET-ADP communications adapter is an Ethernet interface with 10BASE-T specifications for the FX 1S and FX 1N series.
The FX 2NC -ENET-ADP enables upload, download, monitor and test sequence of programs via Ethernet from a personal computer (GX Developer or MX Component and the virtual
COM port driver installed).
Note: When connecting this adapter module to a FX1S or FX1N PLC the communications adapter
FX1N-CNV-BD is required.
Protocol
No. of simultaneous open connections
Interface
Connector
Max. transfer rate
Cable
Related I/O points
Power supply
5 V DC
24 V DC
Weight
Dimensions (WxHxD)
Order information
TCP/IP
1
IEEE802.3u (100BaseTX), IEEE802.3 (10BaseT)
RJ45 (to Ethernet), 3 screw terminals (to ground)
10 Mbit/s
CAT5 STP or 3 STP
0
135 mA (from base unit)
— kg 0.1
mm 19.1x90x78
Art. no. 157447
4
왎
Network Module for Ethernet
RUN
INIT.
100M
SD
RD
ERR.
COM.ERR.
POWER
¨ FX 1S
¨ FX 1N
þ FX 3G
þ FX 3U
þ FX 3UC
Ethernet Communications Module FX 3U -ENET
The FX3U-ENET communications module provides the FX 3G , FX 3U or FX3 UC with a direct connection on to an Ethernet network.
With the FX3U-ENET installed an FX 3G /FX 3U /FX3 UC PLC can exchange data quickly and easily with process visualization systems in addition to supporting full program
UP/DOWN load as well as comprehensive monitoring support. The module also supports
Peer to Peer connection and MC Protocol. It is easily set-up with the FX Configurator-EN software.
Note: The FX 3U -ENET can be used in combination with a FX3G, FX3U- or FX3UC base unit only.
FX3U-ENET
10BASE-T/100BASE-TX
C1
C2
C3
C4
C5
C6
C7
C8
Protocol
Communication mode
No. of simultaneous open connections
Fixed buffer communication
Communication with mail server
Interface
Connector
Max. transfer rate
Max. segment length
Cable
Power supply
5 V DC
24 V DC
Related I/O points
Weight
Dimensions (WxHxD)
Order information
TCP/IP, UDP
Full-duplex / half-duplex
8
1023 word x 8
SMTP, POP3
IEEE802.3u (100BaseTX), IEEE802.3 (10BaseT)
RJ45
100 Mbits/s, 10 Mbit/s m 100
CAT5 STP or 3 STP
—
240 mA (from base unit)
8 kg 0.3
mm 55x90x87
Art. no. 166086
MITSUBISHI ELECTRIC 41
///
NETWORK
MODULES
4
왎
Network Module for Profibus/DP
RUN
TOKEN
FROM/TO
ERROR
POWER
¨ FX 1S
¨ FX 1N
¨ FX 3G
þ FX 3U
þ FX 3UC
Master module FX 3U -64DP-M
The FX 3U -64DP-M PROFIBUS/DP master module enables you to integrate a MELSEC FX 3U or FX3 UC PLC system as a class 1 master of a PROFIBUS/DP network.
This interface module provides your FX 3U /FX 3UC base unit with an intelligent Profibus/DP link for the implementation of decentralised control tasks.
The FX 3U Profibus/DP master provides comprehensive data and alarm processing to the
Profibus/DP V1 standard. It is easily set up with the GX Configurator-DP software.
Note: The FX 3U -64DP-M can be used in combination with a FX3U- or FX3UC base unit only.
Module type
Transmission type
Transmission data
Interface
Max. number of master per configuration
Repeaters
Max. number of slaves
Communications speed
Communications distance
Communication cable
5 V DC
Power supply
24 V DC
Related I/O points
Weight
Dimensions (WxHxD)
Order information
Accessories
Master
Bus network
32 byte/slave (normal service mode)
244 byte/slave (extended service mode)
PROFIBUS/DP (with 9 pole D-SUB connector)
1
3
64
PROFIBUS standard m Max. 1,200 (depends on communication speed)
PROFIBUS cable with 9-pin D-SUB connector
—
Max. 155 mA (from base unit)
8 kg 0.2
mm 43x90x87
Art. no. 166085
PROFIBUS connector up to 12 Mbaud: PROFICON-PLUS, art. no. 140008 or
PROFICON-PLUS-PG, art. no. 140009
왎
Network Module for Profibus/DP
¨
FX 1S
þ
FX 1N
¨
FX 3G
¨
FX 3U
¨
FX 3UC
Slave Module FX 0N -32NT-DP
The FX 0N -32NT-DP PROFIBUS/DP slave module enables you to integrate a MELSEC FX 1N in an existing PROFIBUS/DP network.
This interface module provides your FX 1N CPU with an intelligent PROFIBUS/DP link for the implementation of decentralised control tasks.
It links the system to the master PLC in the PROFIBUS/DP network for efficient and trouble-free data exchange.
POWER
DC RUN
BF DIA
Module type
Interface
Communications speed
Profibus specifications
Communications distance
Communication cable
Power supply
5 V DC
24 V DC
Related I/O points
Weight
Dimensions (WxHxD)
Order information
Accessories
Slave
PROFIBUS/DP (with 9 pole D-SUB connector)
PROFIBUS standard
PROFIBUS standard m Max. 1,200 (depends on communication speed)
PROFIBUS cable with 9-pin D-SUB connector
Max. 170 mA (from base unit)
60 mA
8 kg 0.3
mm 43x90x87
Art. no. 62125
PROFIBUS connector up to 12 Mbaud: PROFICON-PLUS, art. no. 140008 or
PROFICON-PLUS-PG, art. no. 140009
42 MITSUBISHI ELECTRIC
NETWORK
MODULES
///
왎
Network Module for Profibus/DP ¨ FX 1S
¨ FX 1N
þ FX 3G
þ FX 3U
þ FX 3UC
FX 3U -32DP PROFIBUS DP Slave Module
The FX 3U -32DP PROFIBUS DP slave module is available for FX3 series main units and allows the attached FX main unit to function as a slave station on a PROFIBUS DP-V1 network. PROFIBUS DP-V1 functionality supports extensive alarm processing and messaging on top of standard cyclic data exchange.
Note: When attaching the FX3U-32DP to an FX3UC main unit, the FX2NC-CNV-IF interface converter or the FX3UC-1PS-5V power supply unit is required.
RUN
TOKEN
FROM/TO
DIA
POWER
Module type
Transmission type
Transmission data
Slave station
Bus network
Max. 144 bytes
Interface PROFIBUS DP connector
Max. number of slave stations per configuration 8
Communication speed
Communication distance
Communication cable
Max. 12 Mbps
Max. 1,200m (depends on communication speed)
PROFIBUS cable with PROFIBUS DP connector
Related I/O points
Power supply
Weight
Dimensions (WxHxD)
8
Internal 24 V DC/145 mA kg 0.2
mm 43x90x89
Order information Art. no. 194214
4
왎
Remote I/O Station for PROFIBUS/DP
L N
COM 24 +
RUN
STOP
MITSUBISHI
POWER
RUN
BF
DIA
Remote I/O Station FX 2N -32DP-IF
The remote I/O station FX 2N -32DP-IF forms an extremely compact communication unit and provides a connection of I/O modules with up to 256 I/O points and/or up to 8 special function modules as an alternative.
It features an entire electrical isolation of the PROFIBUS/DP connector and of the sensor/actuator circuits.
The FX 2N -32DP-IF includes a 240 V power supply unit and a 24 V service voltage terminal, e.g. for analog modules. The FX 2N -32DP-IF-D is supplied with 24 V DC.
PROFIBUS data such as the baud rate or I/O data can be monitored directly with the programming software or on the hand-held programming units FX-10P/FX-20P/ FX-30P. This facilitates an easy error diagnosis directly on the remote I/O station.
ON
OFF
Power supply
Power consumption
Internal current consumption
Interface (connectors)
Communication speed
200 m
100 m
Communication distance
Communication cable
Max. number of controllable I/O points
Related I/O points
Weight
Dimensions (WxHxD) distance
1200 m
1000 m
400 m
Order information
100–240 V AC
(+10 %/-15 %) 50/60 Hz
30 VA
5 V DC/max. 220 mA (from base unit),
24 V DC/500 mA
FX2N-32DP-IF-D
24 V DC
(+20 %/-30 %)
14 W
5 V DC/max. 220 mA (from base unit)
9-pin D-SUB for PROFIBUS/DP,
8-pin Mini-DIN for PC or programming unit FX-10P/FX-20P/FX-30P kbps 9.6/19.2/45.45/93.75
kbps 187.5
kbps 500 kbps 1500 kbps 3000/6000/12000 m Max. 1200 (depends on communication speed)
PROFIBUS cable with 9-pin D-SUB connector
256
0 kg 0.4
mm 75x98x87
Art. no. 145401 142763
MITSUBISHI ELECTRIC 43
///
NETWORK
MODULES
4
왎
Network Module for DeviceNet
POWER
¨ FX 1S
¨ FX 1N
þ FX 3G
þ FX 3U
þ FX 3UC
DeviceNet Slave Module FX 2N -64DNET
The DeviceNet slave module FX 2N -64DNET can be used to connect FX 3G and FX 3U programmable controllers to a DeviceNet network.
The FX 2N -64DNET can communicate to the master by the master/slave communication
(using the master/slave I/O connection), and to other nodes supporting the UCMM connection by client/server communication (using the UCMM connection).
The communication between the programmable controller and the internal buffer memory of the FX
2N-
64DNET is handled by FROM/ TO instructions.
/TO
MS
NS
Module type
Node type
Station numbers
Supported communication speeds
Communication data
(open connection)
Master/ slave
UCMM client/server
Communication data
(I/O connection)
Module ID code
Status displays
Related I/O points
Power supply
Weight
Dimensions (WxHxD) no. of connections
Slave (group 2)
G2 Server
0–63 points kbps 125/250/500
1 connection (group 2) transfer time-out no. of connections data length type data length
2,000 ms (ACK time-out)
63/63 (group 1, 3)
Max. 64 bytes per connection
Polling, cyclic, change of state
Max. 64 bytes (fragmentation is possible)
K 7090
5 V DC
24 V DC
Power, module status, network status
8
120 mA mA 50 mA kg 0.2
mm 43x90x87
Order information Art. no. 131708
왎
Network Module for CANopen
RUN
FROM/TO
Tx/Rx
ERROR
POWER
¨
FX 1S
þ
FX 1N
þ
FX 3G
þ
FX 3U
þ
FX 3UC
CANopen Master-Modul FX
2N
-32CAN
The FX
2N
-32CAN communications module makes it possible to connect an FX
1N
, FX
3G or
FX 3U /FX3 UC PLC to an existing CANopen network.
In addition to real-time capabilities and high-speed data transfer at rates of up to 1Mbit/s the
CANopen module also shines with high transfer reliability and simple network configuration.
Up to 120 data words can be sent and received as process data objects (30 PDOs). The number of words that can be transmitted in each direction can be set between 1 and 120.
Communication with the module’s memory buffer is performed with simple FROM/TO instructions.
44
Module type
Power supply
CAN standard
CANopen standard by CiA
Additional CANopen features
NMT, Guarding, and Guarding request based on DS-302 V2.0.
network variables based on DS-405 V1.0
Max. nbr. of modules that can be connected to the network
Station numbers
Supported baud rate
Status displays
30 without repeater; 127 with repeater
1–127 kBaud 10, 20, 50, 125, 250, 500, 800, 1000
RUN, Error, Power, Network status
Related I/O points
Power supply
Weight
Dimensions (WxHxD)
5 V DC
24 V DC
CANopen master
5 V DC (via base unit)
ISO 11898/1993
DS-301 version 3.0
8
290 mA
— kg 0.2
mm 43x90x88.7
Order information Art. no. 141179
MITSUBISHI ELECTRIC
COMMUNICATIONS
MODULES
///
왎
Modbus & Serial Communication Special Adapters þ FX 1S
þ FX 1N
þ FX 3G
þ FX 3U
þ FX 3UC
Active data modules (RS485)
The addition of active data interface modules permit active communication between the
PLC and surrounding devices. With RS485 communication can be configured as either
1:N multidrop, parallel link or peer to peer operation.
FX3U-485ADP-MB also supports Modbus RTU and Modbus ASCII.
FX2NC-485ADP
FX
3U
-
MB
POWER
RD
SD
330
OPEN
110
FX3U-485ADP
Interface
Communication speed*
Max. communication distance
Power supply
5 V DC
24 V DC
Related I/O points
Weight
Dimensions (WxHxD)
RS485 kbps 0.3–19.2
m 500
Max. 150 mA (from base unit)
—
0 kg 0.1
mm 19.1x90x78
FX3U-485ADP-MB
�
RS485; Modbus RS485
0.3–19.2
500
20 mA (from base unit)
—
0
0.08
17.6x90(106)x74
Order information Art. no. 149111 206191
�
Application for FX1S/FX1N base unit
�
Application for FX3G/FX3U/FX3UC base units
* Speed depends on communication method (Parallel link, N:N Network, No protocol, Dedicated protocol etc.)
Note: When connecting these adapter modules to a FX3U, a communications adapter FX3U첸첸첸 -BD is required. When connecting the
FX2NC adapters to a FX1S or FX1N PLC the communications adapter FX1N-CNV-BD is required. When connecting an FX3U adapter to a FX3G
PLC the communications adapter FX3G-CNV-ADP is required.
4
왎
Interface Modules
POWER
RD
SD
FX2NC-232ADP
FX
3U
-232ADP
POWER
RD
SD
FX3U-232ADP
þ FX 1S
þ FX 1N
þ FX 3G
þ FX 3U
þ FX 3UC
Active Data Interface Modules FX 2NC -232ADP, FX 3U -232ADP
The additional active data interface modules permit active communication between the
PLC and surrounding RS232C peripherals. All device information can be sent or received via these interfaces.
The module is suitable for the connection of printers, bar code readers, PCs and other PLC systems. The communication is handled by the PLC program using the RS instruction.
The connection is to the communications bus on the left side of the controller.
The internal serial RS422 interface is also fully available.
Note: The FX 2NC -232ADP requires a FX 2N -CNV-BD interface adapter when connecting to a FX1S or FX1N base unit.
The FX3U-232ADP can be used in combination with a FX3G, FX3U or FX3UC base unit only. When connecting the interface modules to a FX3U base unit, an interface or communications adapter FX3U-
쏔쏔쏔
-B is required.
A direct connection without adapter is possible if these modules are connected to a FX3UC base unit.
Interface
Communication speed*
Communication distance
Communication cable
Communication mode
Protocols
Format
Power supply
Related I/O points
Weight
Dimensions (WxHxD)
5 V DC
24 V DC
FX3U-232ADP
RS232C with 9 pin D-SUB compact plug (photocoupler isolation) kbps 0.3–19.2
0.3–115.2
m Max. 15
Shielded cable
Max. 15
Shielded cable
Half duplex /Full Duplex Half duplex /Full Duplex
Computer link (dedicated protocol: format1, format4), no protocol, optional programming port
7 or 8 bits, parity: none/even/odd, stop bits: 1 or 2
100 mA (from base unit)
—
0 kg 0.1
mm 19.1x90x83
7 or 8 bits, parity: none/even/odd, stop bits: 1 or 2
30 mA (from base unit)
—
0
0.08
17.6x90(106)x81.5
Order information Art. no. 149110 165276
* Speed depends on communication method (No protocol, Dedicated protocol, Protocol for programming tool)
MITSUBISHI ELECTRIC 45
///
COMMUNICATIONS
MODULES/
EXTENSION
ADAPTERS
4
왎
Interface Modules ¨ FX 1S
¨ FX 1N
¨ FX 3G
þ FX 3U
þ FX 3UC
Interface Module FX 2N -232IF
The interface module FX 2N -232IF provides an RS232C interface for serial data communications with the MELSEC FX 3U and FX 3UC .
Communication with PCs, printers, modems, barcode readers etc. is handled by the PLC program.
The send and receive data are stored in the FX 2N -232IF’s own buffer memory.
Changes at the user program are not possible via this interface module.
Interface
Communication speed
Communication distance
Communication cable
Communication mode
Protocols
Send and receive buffer
Format
Power supply
5 V DC
24 V DC
Related I/O points
Weight
Dimensions (WxHxD)
Order information
RS232C with 9 pole D-SUB connector (photocoupler isolation) kbps 0.3–19.2
m Max. 15
Shielded cable
Full duplex
Non protocol mode/start stop synchronisation
512 byte each
7 or 8 bits, parity none/even/odd, stop bits: 1 or 2
40 mA (from base unit)
80 mA
8 kg 0.3
mm 55x90x87
Art. no. 66640
왎
Digital Extension Adapter Boards
FX1N-2EYT-BD
þ FX 1S
þ FX 1N
¨ FX 3G
¨ FX 3U
¨ FX 3UC
Extension Adapters FX 1N -4EX-BD, FX 1N -2EYT-BD
The extension adapters for the FX 1N series are available with 4 inputs or 2 outputs.
They are installed directly in the controller of the FX 1S or FX 1N series and therefore do not require any additional installation space.
These adapters are especially advantageous when only few additional I/Os are required and there is not enough room for an adjacent module to be installed.
FX1N-2EYT-BD
Connector side
Applicable for
Integrated inputs/outputs
Power supply
Integrated inputs
Input level voltage current
Integrated outputs
Output type
Max. switching voltage
Weight
Dimensions (WxHxD)
Order information
Base units FX1S/FX1N
4
From base unit
4
24 V DC (+20 %/-15 %)
5 mA (24 V DC)
—
—
V — kg 0.02
mm 43x38.5x22
Art. no. 139418
FX1N-2EYT-BD
Base units FX1S/FX1N
2
From base unit
—
—
—
2
Transistor
5–30 V DC
0.02
43x38.5x22
139420
46 MITSUBISHI ELECTRIC
EXTENSION
ADAPTERS
///
왎
Analog Adapter Boards
FX1N-2AD
FX1N-2AD-BD
þ FX 1S
þ FX 1N
þ FX 3G
¨ FX 3U
¨ FX 3UC
Analog Adapter Boards FX 1N -2AD-BD, FX 1N -1DA-BD, FX 3G -1DA-BD and
FX 3G -2AD-BD
The analog input adapter boards FX 1N -2AD-BD and FX 3G -2AD-BD provide the user with
2 analog inputs.
The boards convert analog process signals into digital values which are further processed by the MELSEC controller.
The analog adapters FX 1N -1DA-BD and FX 3G -1DA-BD provide the user with 1 analog output. The modules convert digital values from the FX 1S /FX 1N /FX 3G controller to the analog signals required by the process.
Connector side
FX1N-1DA-BD
FX1N-1DA-BD
Connector side
Applicable for
Power supply
Analog channels inputs outputs
Analog input range
Input resistance
External load voltage input current input voltage output current output
Resolution
Overall accuracy
Conversion speed
Related I/O points
Weight
Dimensions (WxHxD) analog
® digital digital
® analog
Order information
Base units FX1S/FX1N
From base unit
2
—
0 –+10 V DC/4–+20 mA k
W
300
W
250 k
W
—
W
—
2.5 mV (12 bits)/8 µA (11 bits)
±1 %
1 program cycle ms —
0 kg 0.02
mm 43x38.5x22
Art. no. 139421
Base units FX1S/FX1N
From base unit
—
1
0 –+10 V DC/4–+20 mA
—
—
2 –1,000
< 500
2.5 mV (12 bits)/8 µA (11 bits)
±1 %
—
1 program cycle
0
0.02
43x38.5x22
139422
4
FX3G-2AD-BD
FX3G-1DA-BD
Applicable for
Power supply
Analog channels inputs outputs
Analog input range
Input resistance
External load voltage input current input voltage output current output
Resolution
Overall accuracy
Conversion speed
Related I/O points
Weight
Dimensions (WxHxD) analog
® digital digital
® analog
Order information
Base units FX3G
From base unit
2
—
0 –+10 V DC/4–+20 mA k
W
198.7
W
250 k
W
—
W
—
2.5 mV (12 bits)/8 µA (11 bits)
±1 %
180 µs (1 program cycle) ms —
0 kg 0.02
mm 35x51.2x29.2
Art. no. 221265
Base units FX3G
From base unit
—
1
0 –+10 V DC/4–+20 mA
—
—
2 –1,000
< 500
2.5 mV (12 bits)/8 µA (11 bits)
±1 %
—
60 µs (1 program cycle)
0
0.02
35x51.2x29.2
221266
MITSUBISHI ELECTRIC 47
///
ADAPTER
BOARDS
4
왎
Setpoint Adapter Boards
FX1N-8AV-BD
FX3G-8AV-BD
FX1N-8AV-BD
þ FX 1S
þ FX 1N
þ FX 3G
¨ FX 3U
¨ FX 3UC
Analog Setpoint Adapters FX 1N -8AV-BD and FX 3G -8AV-BD
The FX
첸첸
-8AV-BD analog setpoint adapters enable the user to set 8 analog setpoint values. The analog values of the potentiometers are read into the controller and used as default setpoint values for timers, counters and data registers by the user’s PLC programs.
Setpoint value polling and the definition of the potentiometer scales are performed in the PLC program using the dedicated instructions VRRD/VRSC (FNC85/86).
The FX
첸첸
-8AV-BD analog setpoint adapters are installed in the expansion slot of the
FX
1S
/FX 1N / FX 3G CPU. No additional power supply is required for operation.
Applicable for
Power supply
Adjusting range
Related I/O points
Potentiometer evaluation
Weight
Dimensions (WxHxD)
Order information
Base units FX1S/FX1N
From base unit
8 bit
0
FX3G-8AV-BD
Base units FX3G
From base unit
8 bit
0
Via application instruction from the PLC CPU (FNC 85/86) kg 0.02
0.02
mm 43x38.5x22
35x51.2x12
Art. no. 130744 221267
왎
Communications Adapter Boards
RD
SD
¨ FX 1S
¨ FX 1N
¨ FX 3G
þ FX 3U
¨ FX 3UC
Adapter Board FX 3U -USB-BD
This adapter board allows direct USB 2.0 connection to the front of the FX 3U PLC for program maintenance.
Applicable for
Power supply
Weight
Dimensions (WxHxD)
Order information
Base units FX3U
5 V DC (from base unit) kg 0.02
mm 19.6x46.1x53.5
Art. no. 165284
왎
Expansion Adapters
FX
3G
-CNV
-ADP
þ FX 1S
þ FX 1N
þ FX 3G
þ FX 3U
¨ FX 3UC
Expansion Adapters FX 1N -CNV-BD, FX 3G -CNV-ADP, FX 3U -CNV-BD
The below listed expansion adapters enable the connection of the adapter modules
FX
첸첸
-
첸첸첸
ADP on the left hand side of the FX1N, FX3G and FX3U base units.
Applicable for
Weight
Dimensions (WxH)
Order information
Base units FX1S/FX1N kg 0.01
mm 43x38x(D)14
Art. no. 130745
FX3G-CNV-ADP
Base units FX3G
0.1
90x14.6x(D)86
221268
Base units FX3U
0.01
19.6x46.1x(D)53.5
165285
FX3G-CNV-ADP
48 MITSUBISHI ELECTRIC
왎
Interface Adapters
FX3U-232-BD
FX3G-232-BD
FX3U-422-BD
FX3G-422-BD
INTERFACE
ADAPTERS
///
þ FX 1S
þ FX 1N
þ FX 3G
þ FX 3U
¨ FX 3UC
Interface Adapters FX 1N -232-BD, FX 3G -232-BD, FX 3U -232-BD
The FX 첸첸 -232-BD interface adapters provide an RS232C interface for serial data communications with the MELSEC FX 1S /FX 1N /FX 3G /FX 3U .
Applicable for
Interface
Power supply
Related I/O points
Weight
Dimensions (WxHxD)
Order information
Base units FX1S/FX1N
FX3G-232-BD
Base units FX3G
RS232C with 9 pole D-SUB connector
5 V DC/20 mA (from base unit)
— kg 0.02
mm 43x38.5x22
—
0.02
35x51.2x17.2
Art. no. 130743 221254
FX3U-232-BD
Base units FX3U
5 V DC/20 mA
(from base unit)
—
0.02
19.3x46.1x62.7
165281
Interface Adapters FX 1N -422-BD, FX 3G -422-BD, FX 3U -422-BD
The FX 첸첸 -422-BD interface adapters provide a second RS422 interface for connection of an additional device to the controller (programming unit or operator terminal).
Applicable for
Interface
Power supply
Related I/O points
Weight
Dimensions (WxHxD)
Order information
Base units FX1S/FX1N
FX3G-422-BD
Base units FX3G
RS422 with 8 pole mini DIN connector
5 V DC/60 mA
(from base unit)
5 V DC/20 mA (from base unit)
FX3U-422-BD
Base units FX3U
— kg 0.01
mm 43x38.5x20
—
0.02
35x51.2x14.9
—
0.02
19.6x46.1x53.5
Art. no. 130741 221252 165282
4
FX3U-485-BD
FX3G-485-BD
Interface Adapters FX 1N -485-BD, FX 3G -485-BD, FX 3U -485-BD
The interface adapters FX 첸첸 -485-BD provide the controller with an additional RS485 interface. The adapter, which is simply inserted into the base unit’s expansion slot, enables the configuration of RS485 1:n multidrop, parallel link or peer-to-peer networks with FX 1S /FX 1N /FX 3G /FX 3U systems.
Applicable for
Interface
Power supply
Related I/O points
Weight
Dimensions (WxHxD)
Order information
Base units FX1S/FX1N
RS485/RS422
5 V DC/60 mA
(from base unit)
— kg 0.02
mm 43x38.5x22
Art. no. 130742
FX3G-485-BD
Base units FX3G
5 V DC/20 mA
(from base unit)
—
0.02
35x51.2x29.2
221253
FX3U-485-BD
Base units FX3U
5 V DC/40 mA
(from base unit)
—
0.02
19.6x46.1x69
165283
MITSUBISHI ELECTRIC 49
///
EXPANSION
ADAPTER/
MEMORY
CASSETTES
왎
Expansion Adapter
FX
2NC
-CNV-IF
¨ FX 1S
¨ FX 1N
¨ FX 3G
¨ FX 3U
þ FX 3UC
FX 2NC -CNV-IF
The FX2NC-CNV-IF expansion adapter connects FX3UC main units with the standard
FX0N/FX2N/FX3U right side expansion bus.
Bus connection
Weight
Dimensions (WxHxD)
Order information
FX3UC bus to FX0N/FX2N/FX3U bus kg 0.3
mm 90x 4.6x74
Art. no. 104508
FX2NC-CNV-IF
5
왎
Memory Media
WR
RD
8L PLC
ON
PROTECT
SW
OFF
8L PLC
FX1N-EEPROM-8L
þ FX 1S
þ FX 1N
þ FX 3G
¨ FX 3U
¨ FX 3UC
Memory cassettes for FX 1S , FX 1N and FX 3G
All FX 1S , FX 1N and FX 3G base units are equipped with a slot for the optional, robust FX memory cassettes. By connection of these memory cassettes, the internal memory of the controller is switched off and only the program specified in the respective memory cassette is run.
The memory cassettes can upload/download programs to and from the FX PLC internal memory with the help of 2 buttons.
The memory cassette FX3G-EEPROM-32L can also be placed on top of the standard BD expansion boards.
Applicable for
Memory type
Size
Protect switch
Data transfer buttons
Order information
Base units FX1S/FX1N
EEPROM
2000/8000 steps
Provided
Provided
Art. no. 130746
FX3G-EEPROM-32L
Base units FX3G
EEPROM
32000 steps
Provided
Provided
221269
FX3G-EEPROM-32L
왎
Memory Media
¨
FX 1S
¨
FX 1N
¨
FX 3G
þ
FX 3U
þ
FX 3UC
Memory Cassettes for FX 3U /FX 3UC
The memory cassette can be installed at the main unit, and when installed, the memory cassette’s internal program is used in place of the internal RAM memory.
The FX 3U -FLROM-64L features additional data transfer buttons.
50
FX3U-FLROM-64L
Applicable for
Number of steps
Memory type
Protect switch
Data transfer buttons
Dimensions (WxHxD)
Order information
Base units FX3U/FX3UC
16,000
Flash memory
Provided
Not provided mm 37x20x6.1
Art. no. 165278
Base units FX3U/FX3UC
64,000
Flash memory
Provided
Not provided
37x20x6.1
165279
Base units FX3U/FX3UC
64,000
Flash memory
Provided
Provided
37x20x6.1
165280
MITSUBISHI ELECTRIC
EXTERNAL
TERMINAL
BLOCKS
///
왎
Terminal Blocks
2 4 6 8 10 12 14 16 18 20
TB-20C
¨ FX 1S
¨ FX 1N
¨ FX 3G
þ FX 3U
þ FX 3UC
These terminal blocks are adapter modules that simplify the wiring of the inputs and outputs of the FX3UC main units with ribbon cable connectors. This practical, time-saving wiring system also improves the performance of the outputs. Special terminal blocks are also available for the FX3U/FX3UC positioning modules with ribbon cable connectors.
Input blocks, output blocks and combined I/O blocks are available, with a choice of different terminal types.
The TB-
쏔
EX
쏔 input blocks are fitted with rows of bridged connectors for 24V/0V terminals, which make wiring quick and easy.
The TB-8EY-S and TB-8EY-C output blocks consist of 8 standard terminals and a system adapter. The standard terminals can be populated with relay or transistor elements, which makes it possible to configure the system for much higher output currents.
Preconfigured system cabling is available for all the terminal blocks (see next page).
TB-
.0
.1
.2
.3
.4
.5
.6
.7
쏔
EX
쏔
Type
Integrated inputs
Design
Connection type
Application
Dimensions (WxHxD)
Order information
Accessories
Input block
8
TB-8EX-C
Input block
8
Initiator module with potential terminals
TB-16EX-S
Input block
16
Screw terminals Spring terminals Screw terminals
FX2NC series base and extension modules with connectors mm 75x45x54 75x45x63 116x45x54
Art. no. 149144 149145
Connection Cable (see following page)
149021
Socket
Power supply terminal
.0
.1
.2
24V+
.3
-
.4
.5
.6
.7
PLC-V8/FLK14/OUT
Art. 22 95 55 4
System adapter
Base terminal
A2A2-
A2A2-
A2A2-
A2A2-
24
V
24
V
24
V
24
V
24
V
24
V
24
V
24
V
TB-
쏔
EY
쏔
Type
Channels
Design
Connection type
Application
Dimensions (WxHxD)
Output block
8
TB-8EY-C
Output block
8
Socket for relay or transistor elements
Screw terminals Spring terminals
FX2NC series base and extension modules with connectors mm 49.6x100x94
Order information Art. no. 149044
49.6x100x94
149045
Accessories
Pluggable function elements (see below),
Connection cable (see following page)
TB-16EX-C
Input block
16
Spring terminals
116x45x63
149022
TB-20-S
Input/output block
8/16
20 pin terminal module
Screw terminals
TB-20C
Input/output block
8/16
Spring terminals
FX2N series positioning module
75x45x52
149148
75x45x52
149023
Connection cable (see following page)
5
Catch
Contact for plug-in strip bridge
Terminal opertion aperture
LED status display
Inserted relay or transistor element
Notch lever for securing and ejecting
The transistor and relay elements are plugged directly into the standard terminals in the
TB-8EY-S or TB-8EY-C modules. All the elements feature a status LED, protection against reverse polarity connection and a freewheeling diode.
Neighbouring terminals with identical voltages can be connected with plug-in strip bridge connectors, which can be cut to length as required.
Output type
Number of elements
Relay with 1 switch-over contact
8
Rated input voltage 24 V DC
Switching voltage (min./max.) 12 V AC/DC; 250 V AC/DC
Limit permanent current
Max. breaking capacity
Ambient temperature
6 A
140 W (24 V DC), 1500 VA (250 V AC)
-20–+60 °C
Transistor (with optocoupler)
8
24 V DC
3 V DC; 33 V DC
3 A (at 20 °C), 2 A (at 60 °C)
—
-20–+60 °C
Order information Art. no. 149034 (set with 8 elements)
Accessories
149035 (set with 8 elements)
Insulated infinite pin bridge for potential isolation, TB-PIB-RD, color red, art.-no.: 149146;
Insulated infinite pin bridge for potential isolation, TB-PIB-BL, color blue art.-no.: 149147;
Isolation plate TB-SP for lateral base terminal connection, art.-no.: 149158
MITSUBISHI ELECTRIC 51
///
EXTERNAL
TERMINAL
BLOCKS
5
왎
Terminal Connection Cable ¨ FX 1S
¨ FX 1N
¨ FX 3G
þ FX 3U
þ FX 3UC
These preconfigured cables enable quick, error-free wiring of the terminal blocks of the positioning modules for the FX 3U and FX 3UC series fitted with ribbon cable connectors.
The cables are available in a choice of lengths between 1 and 5 m. Other lengths are also possible by special order.
Application
Length
For TB-20m 1
Order information Art. no. 149038
쏔
(1:1 cable)
3
149039
TB-EX-CAB-5M
5
149040
Application
Length
For 2 x terminal blocks TB-8EY-S or TB-8EY-C (Y cable) m 1
Order information Art. no. 149041
3
149042
TB-EY-CAB-5M
5
149043
왎
Connection terminals ¨ FX 1S
¨ FX 1N
¨ FX 3G
þ FX 3U
þ FX 3UC
The base unit FX 2NC -16MR-T-DS and the extension units FX 2NC -16EX-T-DS and
FX
2NC
-16EYR-T-DS are fitted with screw terminals as standard equipment.
These plug-in terminals can easily be replaced with spring terminals if required.
Two replacement terminal units are required for each module with 16 I/Os.
Number of terminal points
Connection type
Application
TB-CON-5-C
5
Spring terminals
Adapter modules
Dimensions (WxHxD) mm 12.5x20x21
Order information Art. no. 221539
10
Spring terminals
Adapter modules and FX2NC-16EX-T-DS /
FX2NC-16EYR-T-DS extension modules
12.5x20x21
149036
52 MITSUBISHI ELECTRIC
POWER
SUPPLIES/
BATTERIES
///
왎
24 V Power Supply Unit
Output DC
24V 1.75 A
Input AC
24V 1.75 A
ALPHA POWER
þ ALPHA þ FX 1S
þ FX 1N
þ FX 3G
þ FX 3U
þ FX 3UC
The ALPHA-POWER units are a convenient power supply for 24 V units and other external devices. They come with mounting systemfor wall or DIN rail mounting and their dimensions are matched to those of the ALPHA family.
Up to 5 power supply units can be installed together for redundant mode operation or connected in parallel for more power. The units have an integrated thermal overload protection circuit and a POWER LED. The output voltage is adjustable.
Application
General specifications
Nominal input voltage
Output voltage
Nominal output current
Max. output current
Ambient temperature
Ambient humidity
Weight
Dimensions (WxHxD)
Order information
ALPHA POWER 24-1.75
ALPHA POWER 24-2.5
Power supply for 24 V DC Alpha base units
Conforms to FX family and ALPHA base units
100–240 V (45–65 Hz)
24 V DC (+/-1 %)
0.75 A (at T=55 °C) 1.75 A (at T=55 °C)
1.4 A 3.75 A
-25–+55 °C (operation), -40–+85 °C (storage)
2.5 A (at T=55 °C)
4.4 A
Max. 95 % (no condensation) kg 0.1
0.2
mm 36x90x61 54x90x61
0.3
72x90x61
Art. no. 209029 209030 209031
왎
5 V Power Supply Unit
FX3U-1PSU-5V
FX3UC-1PS-5V
POWER
FX
3UC
-1PS-5V
¨ FX 1S
¨ FX 1N
¨ FX 3G
þ FX 3U
þ FX 3UC
The power supply modules FX 3U -1PSU-5V and FX 3UC -1PS-5V are used to reinforce the build-in 5 V DC and 24 V DC power supply of a FX 3G /FX 3U /FX 3UC main unit. They do not occupy any I/O points and deliver up to 1 A more current for the 5 V system bus (for special function modules).
Up to two FX 3U -1PSU-5V or FX 3UC -1PS-5V modules can be used. Both modules have an integrated overload protection available.
Note: The FX3U-1PSU-5V can't be used with a 24 V base unit!
When connecting an input extension module (incl. FX2N-8ER-ES/UL, FX2N-8ER) to the FX3U-1PSU-5V, supply the power for it from the 24 V DC service power supply of the connected main unit or powered extension unit on the upstream side.
Application
General specifications
Nominal input voltage
Output voltage
Max. output current
Ambient temperature
Ambient humidity
Weight
Dimensions (WxHxD)
Order information
FX3UC-1PS-5V
Power supply for the FX3G/FX3U system bus Power supply for the FX3UC system bus
Conforms to FX family base units
100–240 V (50/60 Hz) 24 V DC (+20 %/-15 %)
5 V DC/24 V DC
5 V DC 1 A at 40 °C; 0.8 A at 55 °C
5 V DC
1 A
24 V DC 0.3 A at 40 °C; 0.2 A at 55 °C —
-25–+55 °C (operation), -40–+85 °C (storage)
Max. 95 % (no condensation) kg 0.3
mm 55x90x87
0.15
24x90x74
Art. no. 169507 210086
왎
Backup Batteries
FX3U-32BL
MITSUBISHI ELECTRIC
¨ FX 1S
¨ FX 1N
þ FX 3G
þ FX 3U
þ FX 3UC
Batteries
The battery buffers the internal RAM of the MELSEC PLC in the event of a voltage failure.
The battery FX 2NC -32BL is suitable for the positioning modules FX 2N -20GM.
The battery FX 3U -32BL can be used for all base units of the MELSEC FX 3G /FX 3U /FX 3UC series.
Applicable for
Order information
FX2NC-32BL
FX2N-20GM module
Art. no. 128725
FX3U-32BL
Base unit FX3U
165286
53
5
5
///
CABLES
왎
Cables
FX-20P-CAB0
FX-16E-500CAB
FX0N-65EC
þ FX 1S
þ FX 1N
þ FX 3G
þ FX 3U
þ FX 3UC
FX Series connection cables
The cable listed in the following tables are used for FX Series PLC programming, positioning applications, block connections and interface conversion.
Connection cable for RS232C peripherals
Application
Length
Order information
FX2N-1RM to resolver m 5.0
Art. no. 76160
Connection cable for RS-422 peripherals
PC to FX-232AWC-H
3.0
76163
PC to GOT
3.0
124972
Application
Length
Order information
FX-232AWC-H to FX
첸
PLC m 1.5
Art. no. 76094
Connection cable for programming unit
FX-232AWC-H to FX PLC
0.3
25949
Application
Length
Order information
FX-20P-G/FX-30P to FX
첸
PLC FX-20P-E to FX PLC m 1.5
1.5
Art. no. 55917 30815
FX-232AWC-H to FX PLC
1.5
—
FX-20P-CAB to FX
첸
PLC
0.3
31870
Connection cable for extension bus
Application
Length
Order information
PLC bus cable for two-stage-configuration with extension units FX
첸첸
-
첸첸
ES m 0.65
Art. no. 45348
Interface converter
Application
Dimensions
Order information
USB to RS422 converter m 0.063+3.0
Art. no. 165288
RS422 to RS232C converter
0.25x0.8x0.6
159642
왎
Programming Cables
FX-USB-AW
54
The USB to RS-422 converter FX-USB-AW is used for the connection between the PLC and a serial interface of a personal computer. The converter is devided into 2 parts and thus universally applicable for all
FX-series PLCs.
The SC-09 programming cable is used for the connection between the PLC and a serial interface of a personal computer. The cable is devided into 2 parts and thus universally applicable for all Mitsubishi PLCs.
Connection on PC side
Order information
USB
Art. no. 165288
SC-09
9-pin D-SUB
43393
MITSUBISHI ELECTRIC
DISPLAYS
///
왎
Display Modules
MITSUBISHI
ESC -
+ OK
FX
3G
-5DM
Display Module FX 1N -5DM and FX 3G -5DM
The display modules FX 1N -5DM and FX 3G -5DM are inserted directly with space-saving into the controller and enable monitoring and editing of the data stored in the PLC.
The display module e.g. can be used instead of digital switches and external 7-segment displays in very confined areas.
Applicable for
Display
Power supply
Current consumption
Weight
Dimensions (WxHxD)
Order information
Base units FX1S/FX1N
LCD (with backlight)
5 V DC ±5 % (from base unit) mA 110 kg 0.02
mm 40x32x17
Art. no. 129197
FX3G-5DM
Base units FX3G series
LCD (with backlight)
5 V DC ± 5 % (from base unit) n/a
0.02
49x34x12
221270
CLR FNC
ENT
Control and Display Panel FX-10DM-E
The control and display panel FX-10-DM-E provides a key-oriented user-interface and enables you to monitor and edit process data in the PLC.
The display is arranged in 2 rows of 16 characters each. Functions can be invoked and values can be edited using the panel keys.
Applicable for
Display
Resolution
Power supply
Current consumption
Weight
Dimensions (WxHxD)
Order information
All base units FX1S/FX1N/FX2N/FX3U
LCD (with backlight)
2x16 signs (80x16 pixles)
5 V DC ±5 % (from base unit) mA 220 kg 0.02
mm 96x62x32
Art. no. 132600
5
Panel FX 3U -7DM with built-in holder
FX 3U -7DM-HLD
Control and Display Panel FX 3U -7DM, Holder FX 3U -7DM-HLD
The FX3U-7DM display module can be incorporated in the main unit, or can be installed in the enclosure using the FX3U-7DM-HLD display module holder.
Applicable for
Display
Resolution
Power supply
Current consumption
Extension cable
Weight
Dimensions (WxHxD)
Order information
Base units FX3U
16 letters x 4 lines
—
5 V DC (from base unit) mA 20
— kg 0.02
mm 48x35x11.5
Art. no. 165268
Base units FX3U
—
—
—
—
Included
0.01
66.3x41.8x13
165287
MITSUBISHI ELECTRIC
For further control and operator terminals please refer to the technical catalogue HMI.
55
///
DIMENSIONS
ALPHA
Dimensions of the ALPHA series
AL2-14M
쏔
-
쏔
, AL2-24M
쏔
-
쏔
6,0
(A) (B)
DC INPUT
MITSUBISHI
ESC
+
-
OK
AL2-10MR-D
52,0 71,2
6,0
6,0
+ (A) (B) 1 2 3 4 5
DC INPUT
6 7 8 9 10 11 12 13 14 15
POWER
24V DC
MITSUBISHI
ESC
+
-
OK
AL2-24MR-D
OUT1 OUT2 OUT3 OUT4
RELAY
OUTPUT
OUT
5 6 7 8 9
124,6
6,0
6
AL2-4EY
쏔
, AL2-2DA
53,1
+
EI1
+
EI2
-
MITSUBISHI
+
EI3
+
EI4
-
4EX
24,5
AL2-ASI-BD
53,1
ASI+
ASI-
ASI+
ASI-
24,5
AL2-2PT-ADP, AL2-2TC-ADP
33,5 35,5
+ -
V1+ V1V2+ V2-
POWER
24V DC
CH1
OUTPUT
CH2
0~10V
MITSUBISHI
POWER
200°C
CH1
-50°C Line 200°C
CH2
-50°C Line
AL2-2PT-ADP
PT100 -50~200°C
CH1 CH2
L1+ L1-
I
1L2+ L2-
I
2-
All dimensions in mm
56 MITSUBISHI ELECTRIC
DIMENSIONS
FX1S/FX1N/FX3G
BASE
UNITS
///
Dimensions of Base Units FX 1S
X
X-8
100-240
VAC
L N
S/S
X0
X1
X2
X3
X4
X5
X6
X7
MITSUBISHI
0 1 2 3
4 5 6 7
IN
POWER
RUN
ERROR
24V
0V
COM0
Y0
COM1
Y1
COM2
Y2
Y3
Y4
Y5
OUT
0 1 2 3
4 5
14MR
-ES/UL
2 x ø4,5
Dimensions of Base Units FX 1N
X
X – 8
100-240
VAC
L N
S/S
X0
X1
X2
X3
X4
X5
X6
X7
X10
X11
X12
X13
X14
X15
X16
X17
X20
X21
X22
X23
X24
X25
X26
X27
MITSUBISHI
0 1 2 3 4 5 6 7 10
11 12 13 14 15 16 17 20 21
22 23 24 25 26 27
IN
POWER
RUN
ERROR
24V
0V
COM0
Y0
COM1
Y1
COM2
Y2
Y3 COM3
Y4
Y5
Y6
Y7
0 1 2 3 4 5 6
11 12 13 14 15 16 17
OUT
7 10
COM4
Y10
Y11
Y12
Y13 COM5
Y14
Y15
Y16
Y17
40M
2 x ø4,5
Dimensions of Base Units MELSEC FX 3G
X
X - 8
Z
75
87
FX1S-10MR-DS
FX1S-10MR-ES/UL
FX1S-10MT-DSS
FX1S-14MR-DS
FX1S-14MR-ES/UL
FX1S-14MT-DSS
FX1S-20MR-DS
FX1S-20MR-ES/UL
FX1S-20MT-DSS
FX1S-30MR-DS
FX1S-30MR-ES/UL
FX1S-30MT-DSS
75
100
100
100
60
75
75
X
60
60
60
60
60
90
90
90
90
90
90
90
Y
90
90
90
90
90
All dimensions in mm
49
49
75
49
49
49
75
Z
49
75
49
49
75
FX1N-14MR
왏왏왏
FX1N-14MT
왏왏왏
FX1N-24MR
왏왏왏
FX1N-24MT
왏왏왏
FX1N-40MR
왏왏왏
FX1N-40MT
왏왏왏
FX1N-60MR
왏왏왏
FX1N-60MT
왏왏왏
FX3G-14
FX3G-24
FX3G-40
FX3G-60
X
90
90
90
90
130
130
175
175
All dimensions in mm
X
90
90
130
175
All dimensions in mm
6
ø4,5
MITSUBISHI ELECTRIC 57
6
///
DIMENSIONS
FX3U
BASE
UNITS
AND
ADAPTERS
Dimensions of Base Units FX 3U
22
X
X1
FX 3U
L N
S/S 0V
24V
X0
X1
X2
X3
X4
X5
X6
X7
-16M
03 12
IN
47 56
POWER
RUN
BATT
ERROR
03 12
OUT
47 56
Y0
Y0
Y1
Y1
Y2
Y2
Y3
Y3
Y4
Y4
Y5
Y5
Y6
Y6
Y7
Y7
R
86
Base Units
FX3U-16M
왏왏왏
FX3U-32M
왏왏왏
FX3U-48M
왏왏왏
FX3U-64M
왏왏왏
FX3U-80M
왏왏왏
FX3U-128M
왏왏왏
X
130
150
182
220
285
350
X1
103
123
155
193
258
323
All dimensions in mm
Ø 4.5
Dimensions of Base Units FX 3UC
X
Base Units
FX3UC-16MT/DSS
FX3UC-32MT/DSS
FX3UC-64MT/DSS
FX3UC-96MT/DSS
X
34
34
59.7
85.4
All dimensions in mm
Dimensions of Adapter Modules FX 3U and Extension Adapters
Ø3.2
74 15.5
17.6
FX 3U -4AD-ADP
POWER
53.5
Ø3.2
19.6
Extension Adapters
FX3U-CNV
FX3U-USB
FX3U-485
FX3U-422
FX3U-232
X
—
—
15,5
—
9,2
All dimensions in mm
53.5
X
19.6
58 MITSUBISHI ELECTRIC
DIMENSIONS
FX0N/FX2N
EXTENSION
UNITS
///
Dimensions of Compact Extension Units FX 0N
X
X -10
87
MITSUBISHI
MELSEC FX -24MR-ES
ø4,5
FX0N-40ER-DS
FX0N-40ER-ES/UL
FX0N-40ET-DSS
X
150
150
150
All dimensions in mm
Dimensions of Compact Extension Units and Modular Extension Blocks MELSEC FX 2N
87
ø4,5
Ø4.5
X
IN
3
4
5
6
7
0
1
2
POWER
4
IN
2
3
4
0
1
5
6
7
Compact Extension Units
FX2N-32E
왏왏왏
FX2N-48E
왏왏왏
FX2N-48ER-UA1/UL
X
150
182
220
Modular Extension Blocks
FX2N-8E
왏왏왏
FX2N-16E
왏왏왏
X
43
40
All dimensions in mm
6
Dimensions of Modular Extension Blocks FX 2NC
74 Y X
Power
X0
3
X4
5
1
2
X0
1
6
7
2
3
X4
5
6
7
FX
2NC
-32EX
-DS
2
3
X4
5
6
7
X0
1
2
3
X4
5
6
7
X0
1
Extension Blocks
FX2NC-16EX-DS
FX2NC-16EYT-DSS
FX2NC-16EX-T-DS
FX2NC-16EYR-T-DSS
FX2NC-32EX-DS
FX2NC-32EYT-DSS
X
14.6
14.6
20.2
24.2
26.2
26.2
Y
13
13
15
15
13
13
All dimensions in mm
MITSUBISHI ELECTRIC 59
6
///
DIMENSIONS
SPECIAL
FUNCTION
MODULES
Dimensions of Special Function Modules MELSEC FX 2N
ø4,5
X 87
4
POWER
24 V
A / D
FX0N-3A
FX2N-2DA
FX2N-2AD
FX2N-4DA
FX2N-4AD
FX2N-4AD-TC
FX2N-4AD-PT
FX2N-1HC
FX2N-1PG-E
FX2N-10PG
FX2N-2LC
FX2N-5A
FX2N-232-IF
FX2N-32ASI-M
FX2N-32CCL
FX2N-32CAN
FX2N-64DNET
Special Function Modules FX
0N
/FX
2N
55
43
43
43
43
43
55
55
55
55
55
55
55
55
X
43
43
43
All dimensions in mm
90
75
FX2N-8AD
75
24+ 24-
V1+
V2+
I1+
I2+
COM1 V3+
COM2 V4+
I3+ COM3
I4+ COM4
MITSUBISHI
POWER
RUN
V5+
V6+
I5+
I6+ COM6
COM5 V7+
V8+
I7+
I8+ COM8
COM7
FX2N-32DP-IF
75
L N
COM 24 +
RUN
STOP
MITSUBISHI
POWER
RUN
BF
DIA
ON
OFF
Dimensions of Special Function Modules MELSEC FX 3U /FX 3UC
X 87
ø4,5
4
POWER
24 V
A / D
FX3U-2HC
FX3U-3A-ADP
FX3U-4DA
FX3U-4AD
FX3U-4LC
FX3U-CF-ADP
FX3U-ENET
FX3U-20SSC-H
FX3U-64CCL
FX3U-64DPM
FX3U-1PSU-5V
FX3UC-4AD
FX3UC-1PS-5V
Special Function Modules FX 3U /FX 3UC
55
90
45
55
55
X
55
17.6
55
55
43
55
20.2
24.2
All dimensions in mm
60 MITSUBISHI ELECTRIC
Dimensions of Adapters FX 1N and FX 3G
FX3G-485-BD
FX1N-4EX-BD
43
DIMENSIONS
SPECIAL
FUNCTION
MODULES
///
43
35 X1 X
FX
3G
Extension Adapters
FX3G-1DA-BD
FX3G-232-BD
FX3G-2AD-BD
FX3G-422-BD
FX3G-485-BD
FX3G-8AV-BD
X
14.1
12
14.1
12
14.1
12
X1
15.1
5.2
15.1
2.9
15.1
–
All dimensions in mm
Dimensions for Terminal Blocks
TB-20-S
75
50
TB-20-C
6
75
TB-8EX-S
75 54
TB-8EX-C
75
63
TB-16EX-S
116
62
TB-16EX-C
54
MITSUBISHI ELECTRIC
All dimensions in mm
61
///
DIMENSIONS
ACCESSORIES
Dimensions for Accessories
FX-485PC-IF
MITSUBISHI
POWER
RD
SD
FX-485PC-IF
SDA SDB RDA RDB LINK SG
100
FX3G-EEPROM-32L
30
FX3U-FLROM-16/64/64L
FX1N-EEPROM-8L
33
WR
RD
8L PLC
ON
PROTECT
SW
OFF
8L PLC
9
37
35 9.6
6
Dimensions for Display Panels
FX1N-5DM
17
11 40
FX3U-7DM
11.5
8.5
ESC + OK
FX-10DM-E
96 32
48
6.1
FX3G-5DM
49.4
MITSUBISHI
DISPLAY MODULE
MODEL
SERIAL
FX-10DM-E
030002 V1.00
MITSUBISHI ELECTRIC CORPORATION
CLR FNC
86
ENT
4,5
62
All dimensions in mm
9.6
12
All dimensions in mm
MITSUBISHI ELECTRIC
PROGRAMMING
///
MELSOFT – Programming and Documentation Software for Standard Personal Computers
With the MELSOFT software family Mitsubishi Electric offers efficient software packages helping to reduce programming and setup times to a high degree. The MELSOFT software family provides instant access, direct communications, compatibility, and open exchange of variables.
The MELSOFT family comprises:
앬
앬
Programming packages AL-PCS/WIN and GX Developer
Various development software for operator terminals (please refer to the
GOT Technical Catalogue )
앬 Software for a dynamic data exchange like MX Change
AL-PCS/WIN is recommended as a cost-effective beginners package for the ALPHA series.
This package offers a quick and easy introduction to programming.
GX Developer is the right decision for a universal programming package.
In addition, GX Developer is fully compatible with all MELSEC PLCs, including A and
Q series controllers.
For detailed information please order our separate MELSOFT brochure.
For structured programming the IEC1131.3 (EN 61131-3) conform programming software
GX IEC Developer is recommended.
왎
ALPHA Programming Software
AL-PCS/WIN Programming Software
All controllers of the ALPHA series can be programmed with the MS Windows software
AL-PCS/WIN. Programming the ALPHA with this software is very easy and is done by placing the different program elements on a graphical programming environment. The connections (wiring) between the inputs, function blocks, and outputs are drawn graphically by mouse click to build the logic. By this, programs with up to 200 function blocks can be created, where each single function in a program can be used as many times as desired.
A complete documentation of the program can be created directly from AL-PCS/WIN.
Series
Language
Applicable for
Order information
Alpha series
7 languages (English/German/French/Italian/Spanish/Swedish/Russian)
Windows 95/98/ME/NT/2000/XP/Vista
Art. no. 152603
7
왎
PLC Training Software
FX-TRN-BEG-E Training Software
The FX-TRN-BEG-E training software package is designed to help beginners get started with the programming of PLC systems. It combines a simulated PLC environment with expert tutorials. A real-time module simulates the operation of the PLC program. Simulation speed is adjustable and you can also access system elements and display program status while the process is running.
Series
Language
Applicable for
Order information
Whole FX family
English, Russian
Windows 95/98/ME/NT/2000/XP/Vista
Art. no. 149714
MITSUBISHI ELECTRIC 63
///
PROGRAMMING
PLC Programming Software
왎
GX Developer
Series
Language
Disk type
Order information
Accessory
GX Developer is the standard programming software for all MELSEC PLC series and combines all functions of MELSEC
MEDOC with the user guidance of
Microsoft Windows.
With this software you can comfortably create PLC programs alternatively in the form of Ladder Diagrams or Instruction
Lists. Both forms of representation can be toggled easily during operation.
Besides efficient monitoring and diagnostics functions GX Developer features an offline simulation of any PLC type.
With GX Developer all MELSEC PLCs from the FX 1S to the Q25PH (Q series) are supported.
The GX Developer FX is limited to the programming of the FX series.
This software provides all the Windows-specific advantages and is especially suited to all MELSEC PLCs.
The software is supplied without an SC-09 programming cable, which can be ordered separately. This cable is needed for the connection between the PLC and a serial interface of a personal computer.
GX Developer can be run under MS Windows® XP and Vista.
FX1S, FX1N, FX3G, FX3U, FX3UC
German/English
CD ROM
GX DEVELOPER FX
V0878-2L0C-M_2&MORE
FX1S, FX1N, FX3G, FX3U, FX3UC
German/English
CD ROM
Art. no. 225141 225155
Programming cable SC-09, art. no.: 43393
GX Developer V0800-1LOC-G
All MELSEC PLCs
German
CD ROM
152816
All MELSEC PLCs
English
CD ROM
150420
7
왎
GX IEC Developer
GX IEC Developer provides all functions of the pre-mentioned programs and in addition meets the programming standard:
IEC 1131.3 (EN 61131). This makes the software ready for the programming standard of the future and offers beside the FX version in addition the full version as a basis for the on-leading programming of the MELSEC AnS/QnAS series, the
MELSEC AnU/QnA series and MELSEC System Q.
GX IEC Developer can be run under Windows 95/98 and Windows NT/2000/XP.
The software is supplied without an SC-09 programming cable, which can be ordered separately. This cable is needed for the connection between the PLC and a serial interface of a personal computer.
Series
Language
Disk type
Order information
Accessory
FX1S, FX1N, FX3G, FX3U, FX3UC
German
CD ROM
Art. no. 221425
Programming cable SC-09, art. no.: 43393
FX1S, FX1N, FX3G, FX3U, FX3UC
English
CD ROM
221430
All MELSEC PLCs
German
CD ROM
221413
GX IEC Developer V0703-1LOC-E
All MELSEC PLCs
English
CD ROM
221419
64 MITSUBISHI ELECTRIC
PROGRAMMING
///
Configurations Software
왎
GX Configurator DP
The GX Configurator DP is a user friendly configurations software for the open network
PROFIBUS/DP.
The software package is a 32 bit application and runs under all Windows versions.
Configuration of all PROFIBUS/DP modules for the MELSEC Ans/QnAS and A/Q series and also the FX family is possible.
Due to the supported extended user parameters of a GSD file, easy parameter setting of
PROFIBUS/DP slave devices is possible even for third-party devices.
The new GX Configurator DP enables the download of all configuration data via an overriding network.
All PROFIBUS modules are configured via the backside bus.
Supported PROFIBUS/DP master modules for the Mitsubishi MELSEC series
Language
Disk type
Order information
A1SJ71PB92D, AJ71PB92D, QJ71PB92D
English/German
CD ROM
Art. no. 145312
Ac cessory Programming cable SC-09, art. no.: 43393
왎
FX Configurator FP
FX Configurator-FP is beneficial for setting up table operation information, servo amplifier parameters and positioning parameters for the FX3U-SSC-H positioning module. Positioning operations and their associated parameters (speeds, addresses, torque limits etc.) can be monitored and tested with the integrated monitor and test functions.
Control patterns from simple to complicated combinations of positioning commands can easily be configured with new methods.
The software runs under all Windows versions.
7
Supported modules for the Mitsubishi MELSEC series
Language
Disk type
Order information
Accessory
FX3U-20SSC-H
English
CD ROM
Art. no. 189283
Programming cable SC-09, art. no.: 43393
MITSUBISHI ELECTRIC 65
///
PROGRAMMING
7
왎
Hand-Held Programming Unit
STL/MEP
RE
EF
The FX-30P is a small, industrial programming and maintenance tool for the FX Series.
This unit can perform program uploads/downloads and store up to 15 programs in its internal memory. Keywords can be registered, deleted or canceled in applicable PLCs.
Program monitoring and data device adjustment functionality is also available. To stay up to date the latest firmware can be downloaded on a PC then installed via the USB port.
PLC programs on the PC can also be transferred via USB, eliminating the need for peripheral devices.
Note: FX-30P firmware and program downloads from a PC via the embedded USB port available in firmware versions 1.10 and later.
Applicable for
Ambient temperature
Ambient relative humidity
(non-condensing)
Power supply
Display
Character display
Keyboard
Memory
Cable
Weight
Dimensions(WxHxD)
Base units FX1S, FX1N, FX3G, FX2N, FX3U, FX3UC
0–40 °C
5–95 %
Program capacity
HPP held data
5V DC ±5%/155 mA (from main unit)
LCD (with backlight)
21x8
35
Built-in RAM: 64K steps for program monitoring and modification RAM retention (for about five years, ambient temperature 25 C(77 F)) by battery.
Built-in flash memory ROM: Up to 15 programs can be stored in the built-in flash memory
ROM. Allowable number of writes: 100,000 times
Display language setting (Japanese, English or Chinese), contrast, buzzer sound volume, brightness adjustment, screen saver and HPP protect key (saved in the built-in flash memory)
FX-20P-CAB0 kg 0.3
mm 87x170x30
Order information Art. no. 221271
66 MITSUBISHI ELECTRIC
CERTIFICATIONS
///
CE
EMC LVD
ALPHA 2 Base Units
AL2-10MR-A
AL2-10MR-D
AL2-14MR-A
AL2-14MR-D
AL2-24MR-A
AL2-24MR-D
ALPHA Extension Modules
AL2-4EX-A2
쎲
AL2-4EX
AL2-4EYR
쎲
쎲
AL2-4EYT
AL2-2DA
AL2-2PT-ADP
AL2-2TC-ADP
AL2-ASI-BD
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
FX1S Base Units
FX1S-10MR-DS
FX1S-10MR-ES/UL
FX1S-10MT-DSS
FX1S-14MR-DS
FX1S-14MR-ES/UL
FX1S-14MT-DSS
FX1S-20MR-DS
FX1S-20MR-ES/UL
FX1S-20MT-DSS
FX1S-30MR-DS
FX1S-30MR-ES/UL
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쑗
쎲
쎲
쎲
쎲
쑗
쎲
쑗
쎲
쎲
쑗
FX1S-30MT-DSS
FX1N Base Units
FX1N-14MR-DS
FX1N-14MR-ES/UL
FX1N-14MT-DSS
FX1N-24MR-DS
FX1N-24MR-ES/UL
FX1N-24MT-DSS
FX1N-40MR-DS
FX1N-40MR-ES/UL
FX1N-40MT-DSS
FX1N-60MR-DS
FX1N-60MR-ES/UL
FX1N-60MT-DSS
FX3G Base Units
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쑗
쎲
쎲
쎲
쎲
쑗
쎲
쑗
쎲
쎲
쑗
FX3G-14MR/ES
FX3G-14MT/ESS
FX3G-14MR/DS
FX3G-14MT/DSS
FX3G-24MR/ES
FX3G-24MT/ESS
FX3G-24MR/DS
FX3G-24MT/DSS
FX3G-40MR/ES
FX3G-40MT/ESS
FX3G-40MR/DS
FX3G-40MT/DSS
FX3G-60MR/ES
FX3G-60MT/ESS
FX3G-60MR/DS
FX3G-60MT/DSS
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲 uL cUL
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
Ship approvals
ABS DNV LR GL BV RINA
— —
— — — — —
—
쎲
— — —
—
쎲
—
쎲
—
쎲
—
쎲
—
쎲
—
쎲
—
쎲
—
—
—
—
—
—
—
—
—
—
—
—
—
— — — — —
—
쎲
— — —
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
쎲
—
쎲
—
—
—
—
—
—
—
쎲
—
쎲
—
쎲
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
—
쎲
—
쎲
—
쎲
—
쎲
—
쎲
—
쎲
—
쎲
—
쎲
—
쎲
—
쎲
—
쎲
—
쎲
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
CE
EMC LVD
FX3U Base Units
FX3U-16
첸
FX3U-32
첸
FX3U-48
첸
FX3U-64
첸
FX3U-80
첸
FX3U-128
첸
FX3UC Base Units
FX3UC-16MT/DSS
FX3UC-32MT/DSS
FX3UC-64MT/DSS
FX3UC-96MT/DSS
쎲
쎲
쎲
쎲
FX0N/FX2N Extension Units
FX0N-40ER-ES/UL
쎲
FX0N-40ER-DS
FX0N-40ET-DSS
쎲
쎲
FX2N-32ER-ES/UL
FX2N-32ET-ESS/UL
FX2N-48ER-DS
FX2N-48ER-ES/UL
FX2N-48ET-DSS
FX2N-48ET-ESS/UL
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쑗
쎲
쎲
쎲
쑗
쎲 uL cUL
FX2N Extension Blocks
FX2N-8ER-ES/UL
쎲
FX2N-8EX-ES/UL
FX2N-8EYR-ES/UL
쎲
쎲
FX2N-8EYT-ESS/UL
FX2N-16EX-ES/UL
쎲
쎲
FX2N-16EYR-ES/UL
쎲
FX2N-16EYT-ESS/UL
쎲
쑗
쎲
쑗
쎲
쑗
쎲
쑗
FX1N/FX2N Special Function Modules
FX0N-3A
쎲
— —
FX0N-32NT-DP
쎲 쑗 쎲
FX2N-1HC
쎲 쎲 쎲
FX2N-1PG-E
쎲 쎲 쎲
FX2N-2AD
쎲 쑗 쎲
FX2N-2DA
쎲 쑗 쎲
FX2N-2LC
쎲 쑗 쎲
FX2N-4AD
쎲 쑗 쎲
FX2N-4AD-TC
쎲 쑗 쎲
FX2N-4AD-PT
쎲 쑗 쎲
FX2N-4DA
쎲 쑗 쎲
FX2N-5A
쎲 쑗 쎲
FX2N-8AD
FX2N-10PG
쎲
쎲
쑗
쑗
쎲
쎲
FX2N-16CCL-M
FX2N-32ASI-M
FX2N-32CAN
FX2N-32CCL
쎲
쎲
쎲
쎲
쑗
쑗
쑗
쑗
—
—
—
FX2N-32DP-IF
FX2N-64DNET
FX2N-232IF
쎲
쎲
쎲
쎲
쑗
쑗
—
쎲
쎲
—
FX2NC Extension Blocks
FX2NC-16EX-T-DS
쎲
FX2NC-16EYR-T-DS
FX2NC-16EX-DS
쎲
쎲
FX2NC-16EYT-DSS
FX2NC-32-EX-DS
FX2NC-32-EYT-DSS
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
—
쎲
쎲
쎲
—
쎲
쎲
쎲
Ship approvals
ABS DNV LR GL BV RINA
쎲
쎲
쎲
쎲
쎲
쎲
—
—
—
—
—
—
—
—
—
—
—
—
쎲
쎲
쎲
—
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
— —
— —
— —
— —
— —
— —
— —
쎲 쎲
쎲 쎲
— —
쎲 쎲
— —
쎲 쎲
— — — —
— — — —
—
—
쎲
쎲
쎲
— — —
— — —
쎲 쎲 쎲
쎲
쎲
쎲
쎲
쎲
쎲
— — — —
—
쎲
— —
쎲 쎲 쎲 쎲
쎲
쎲
쎲
—
쎲
—
쎲
—
쎲
— — —
— — — —
쎲 쎲 쎲 쎲
쎲
쎲
쎲
—
쎲
쎲
쎲
—
쎲
쎲
쎲
—
쎲
쎲
쎲
쎲
— — —
쎲
— — — —
— — — —
— — — —
— — — —
— — — —
—
쎲
— —
— — — —
쎲 쎲 쎲 쎲
쎲
= comply,
쑗
= no need to comply
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
—
—
—
—
—
—
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
— —
— —
— —
— —
— —
— —
— —
쎲 쎲
쎲 쎲
— —
쎲 쎲
—
쎲
쎲
쎲
— —
— —
— —
— —
쎲 쎲
쎲
쎲
쎲
쎲
— —
— —
— —
— —
— —
— —
쎲
쎲
쎲
쎲
쎲
쎲
— —
— —
쎲 쎲
쎲 쎲
— —
— —
— —
쎲 쎲
쎲
쎲
쎲
—
쎲
쎲
쎲
쎲
—
쎲
— —
— —
— —
— —
— —
— —
— —
쎲 쎲
MITSUBISHI ELECTRIC 67
///
CERTIFICATIONS
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
CE
EMC LVD uL cUL
FX2NC Special Function Modules
FX2NC-485ADP
FX2NC-232ADP
FX2NC-ENET-ADP
쎲
쎲
쎲
— — —
— — —
쑗 쎲
—
쎲
쎲
—
FX2NC-1HC
쎲 쑗 쎲
— —
Ship approvals
ABS DNV LR
쎲
쎲
—
—
GL
—
—
—
—
BV
—
—
—
—
RINA
—
—
—
—
FX3U Special Function Modules
FX3U-2HC
쎲 쑗
FX3U-3A-ADP
FX3U-4AD
쎲
쎲
쑗
쑗
FX3U-4DA
FX3U-4AD-TC-ADP
쎲
쎲
FX3U-4AD-PT-ADP
쎲
FX3U-4AD-PNK-ADP
쎲
쑗
쑗
쑗
쑗
FX3U-4AD-Ptw-ADP
쎲
FX3U-4AD-ADP
쎲
FX3U-4DA-ADP
FX3U-4HSX-ADP
쎲
쎲
FX3U-4LC
FX3U-CF-ADP
FX3U-2HSY-ADP
FX3U-20SSC-H
쎲
쎲
쎲
쎲
FX3U-485ADP-MB
FX3U-232ADP-MB
FX3U-ENET
FX3U-64DP-M
FX3U-64CCL
쎲
쎲
쎲
쎲
쎲
—
쑗
쑗
쑗
쑗
쑗
쑗
쑗
쑗
쑗
쑗
쑗
쑗
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
—
—
—
—
쎲
쎲
—
— —
쎲
쎲
쎲
—
—
쎲
—
—
—
—
—
—
—
—
—
—
쎲
쎲
—
쎲
쎲
쎲
—
—
쎲
—
—
—
—
—
—
—
—
—
—
쎲
쎲
—
— — —
쎲
쎲
쎲
—
—
쎲
— — —
—
—
—
—
—
—
—
—
—
쎲
쎲
—
쎲
쎲
쎲
—
—
쎲
쎲
쎲
—
—
—
—
—
—
—
쎲
쎲
—
쎲
쎲
쎲
—
—
쎲
쎲
쎲
—
—
—
—
—
—
—
쎲
쎲
—
—
쎲
쎲
쎲
—
—
쎲
—
—
—
—
—
—
Adapter Boards
FX1N-1DA-BD
FX1N-2AD-BD
FX1N-2EYT-BD
FX1N-4EX-BD
FX1N-8AV-BD
FX1N-232-BD
FX1N-422-BD
FX1N-485-BD
FX1N-CNV-BD
FX2N-8AV-BD
FX2N-232-BD
FX2N-422-BD
FX2N-485-BD
FX2N-CNV-BD
FX3G-1DA-BD
FX3G-2AD-BD
FX3G-8AV-BD
FX3G-232-BD
FX3G-422-BD
FX3G-485-BD
FX3U-232-BD
FX3U-422-BD
FX3U-485-BD
FX3U-CNV-BD
FX3U-USB-BD
쑗
쑗
쑗
쑗
쑗
쑗
쑗
쑗
쑗
쑗
쑗
쑗
쑗
쑗
쑗
쑗
쑗
쑗
쑗
쑗
쑗
쑗
쑗
쑗
쑗
—
—
—
—
—
—
—
—
—
—
—
—
—
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
—
—
—
쎲
—
—
—
—
— — —
—
—
—
—
—
—
—
—
—
—
—
쎲
—
—
—
—
—
— — —
—
쎲 쎲
—
쎲 쎲
—
쎲 쎲
—
쎲 쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
—
—
—
—
—
—
—
—
— —
— — —
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
— — —
쎲 쎲 쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
—
—
—
—
—
—
—
—
—
—
—
—
쎲
쎲
쎲
쎲
쎲
CE
EMC LVD uL cUL
Ship approvals
ABS DNV LR GL BV RINA
Terminal Blocks
TB-20S
TB-20C
Accessories
ALPHA POWER 24
FX1N-5DM
FX-10DM-E
FX-20 P-E-SET0
FX-USB-AW
FX-232AWC-H
FX2N-CNV-IF
FX2N-CNV-BC
FX2NC-CNV-IF
FX3U-1PSU-5V
FX3UC-1PS-5V
FX3U-7DM
FX3U-7DM-HLD
—
—
쑗
쑗
쎲
쎲
— — — —
— — — —
쑗
쑗
쑗
쑗
쑗
쎲
쑗
쑗
쑗
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
쎲
—
—
—
—
—
—
쎲
—
—
—
쎲
—
—
—
쎲
—
—
—
쎲
—
—
— — — —
— — — —
쎲
— — — —
—
—
— — — —
—
쎲 쎲
—
— — —
— — —
쎲 쑗
—
쎲
— —
— — — —
—
쎲
—
쎲
쎲
—
—
쎲
—
—
쎲
—
쎲
= comply,
쑗
= no need to comply
— —
— —
— —
—
쎲
— —
— —
— —
— —
— —
— —
— —
— —
— —
쎲 쎲
— —
68 MITSUBISHI ELECTRIC
INDEX
///
A
AL-232CAB . . . . . . . . . . . . . . . . . . . . . . . 12
AL2-10MR-A . . . . . . . . . . . . . . . . . . . . . . . 9
AL2-10MR-D . . . . . . . . . . . . . . . . . . . . . . . 9
AL2-14MR-A . . . . . . . . . . . . . . . . . . . . . . . 9
AL2-14MR-D . . . . . . . . . . . . . . . . . . . . . . . 9
AL2-24MR-A . . . . . . . . . . . . . . . . . . . . . . . 9
AL2-24MR-D . . . . . . . . . . . . . . . . . . . . . . . 9
AL2-2DA . . . . . . . . . . . . . . . . . . . . . . . . . 11
AL2-2PT-ADP. . . . . . . . . . . . . . . . . . . . . . 11
AL2-2TC-ADP . . . . . . . . . . . . . . . . . . . . . 11
AL2-4EX . . . . . . . . . . . . . . . . . . . . . . . . . 11
AL2-4EX-A2 . . . . . . . . . . . . . . . . . . . . . . 11
AL2-4EYR . . . . . . . . . . . . . . . . . . . . . . . . 11
AL2-4EYT . . . . . . . . . . . . . . . . . . . . . . . . 11
AL2-ASI-BD . . . . . . . . . . . . . . . . . . . . . . . 12
AL2-EEPROM-2 . . . . . . . . . . . . . . . . . . . . 12
AL2-GSM-CAB . . . . . . . . . . . . . . . . . . . . . 12
ALPHA 2 series
Accessories . . . . . . . . . . . . . . . . . . . . . 12
Base units . . . . . . . . . . . . . . . . . . . . . . . 9
Dimensions . . . . . . . . . . . . . . . . . . . . . 56
Extension modules . . . . . . . . . . . . . . . . 11
Interface Cable. . . . . . . . . . . . . . . . . . . 12
Memory Cassette . . . . . . . . . . . . . . . . . 12
Specifications . . . . . . . . . . . . . . . . . . . 10
System description. . . . . . . . . . . . . . . . . 8
ALPHA POWER 24-0.75 . . . . . . . . . . . . . . . 53
ALPHA POWER 24-1.75 . . . . . . . . . . . . . . . 53
ALPHA POWER 24-2.5 . . . . . . . . . . . . . . . . 53
Accessories
Batteries . . . . . . . . . . . . . . . . . . . . . . . 53
Cables . . . . . . . . . . . . . . . . . . . . . . . . 52
Connection terminals . . . . . . . . . . . . . . 52
Display modules. . . . . . . . . . . . . . . . . . 55
Programming Cables . . . . . . . . . . . . . . 54
Terminal blocks . . . . . . . . . . . . . . . . . . 51
Active data modules . . . . . . . . . . . . . . . . . 45
Adapter boards . . . . . . . . . . . . . . . . . . . . 47
Analog modules. . . . . . . . . . . . . . . . . . . . 33
Dimensions . . . . . . . . . . . . . . . . . . . . . 60
C
Cables . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Connection Cable . . . . . . . . . . . . . . . . . . . 52
Modules . . . . . . . . . . . . . . . . . . . . . . . 54
Terminal blocks . . . . . . . . . . . . . . . . . . 52
D
Data logger module . . . . . . . . . . . . . . . . . 36
Dimensions . . . . . . . . . . . . . . . . . . . . . . . 56
Display Modules. . . . . . . . . . . . . . . . . . . . 55
E
Extension Adapter Boards . . . . . . . . . . . . . 46
Extensions
ALPHA 2 Series. . . . . . . . . . . . . . . . . . . 11
Dimensions . . . . . . . . . . . . . . . . . . . . . 59
FX series . . . . . . . . . . . . . . . . . . . . . . . 26
External Terminal Blocks . . . . . . . . . . . . . . 51
F
F2-232CAB-1. . . . . . . . . . . . . . . . . . . . . . 54
F2-RS-5CAB. . . . . . . . . . . . . . . . . . . . . . . 54
FX Configurator FP . . . . . . . . . . . . . . . . . . 65
FX-10DM-E . . . . . . . . . . . . . . . . . . . . . . . 55
FX-20P-CAB. . . . . . . . . . . . . . . . . . . . . . . 54
FX-20P-CAB0. . . . . . . . . . . . . . . . . . . . . . 54
FX-20P-CADP. . . . . . . . . . . . . . . . . . . . . . 54
FX-232AWC-H . . . . . . . . . . . . . . . . . . . . . 54
FX-232CAB-1. . . . . . . . . . . . . . . . . . . . . . 54
FX-422CAB . . . . . . . . . . . . . . . . . . . . . . . 54
FX-422CAB-150 . . . . . . . . . . . . . . . . . . . . 54
FX-422CAB0 . . . . . . . . . . . . . . . . . . . . . . 54
FX-USB-AW . . . . . . . . . . . . . . . . . . . . . . . 54
FX0N-32NT-DP. . . . . . . . . . . . . . . . . . . . . 42
FX0N-3A . . . . . . . . . . . . . . . . . . . . . . . . . 34
FX0N-40ER-DS . . . . . . . . . . . . . . . . . . . . . 29
FX0N-40ER-ES/UL . . . . . . . . . . . . . . . . . . 29
FX0N-40ET-DSS . . . . . . . . . . . . . . . . . . . . 29
FX0N-65EC . . . . . . . . . . . . . . . . . . . . . . . 54
FX1N series
Base units . . . . . . . . . . . . . . . . . . . . . . 17
Specifications . . . . . . . . . . . . . . . . . . . 18
System description . . . . . . . . . . . . . . . . 16
FX1N-14MR-DS . . . . . . . . . . . . . . . . . . . . 17
FX1N-14MR-ES/UL . . . . . . . . . . . . . . . . . . 17
FX1N-14MT-DSS. . . . . . . . . . . . . . . . . . . . 17
FX1N-1DA-BD . . . . . . . . . . . . . . . . . . . . . 47
FX1N-232-BD . . . . . . . . . . . . . . . . . . . . . 49
FX1N-24MR-DS . . . . . . . . . . . . . . . . . . . . 17
FX1N-24MR-ES/UL . . . . . . . . . . . . . . . . . . 17
FX1N-24MT-DSS. . . . . . . . . . . . . . . . . . . . 17
FX1N-2AD-BD . . . . . . . . . . . . . . . . . . . . . 47
FX1N-2EYT-BD . . . . . . . . . . . . . . . . . . . . . 46
FX1N-40MR-DS . . . . . . . . . . . . . . . . . . . . 17
FX1N-40MR-ES/UL . . . . . . . . . . . . . . . . . . 17
FX1N-40MT-DSS. . . . . . . . . . . . . . . . . . . . 17
FX1N-422-BD . . . . . . . . . . . . . . . . . . . . . 49
FX1N-485-BD . . . . . . . . . . . . . . . . . . . . . 49
FX1N-4EX-BD. . . . . . . . . . . . . . . . . . . . . . 46
FX1N-5DM . . . . . . . . . . . . . . . . . . . . . . . 55
FX1N-60MR-DS . . . . . . . . . . . . . . . . . . . . 17
FX1N-60MR-ES/UL . . . . . . . . . . . . . . . . . . 17
FX1N-60MT-DSS. . . . . . . . . . . . . . . . . . . . 17
FX1N-8AV-BD . . . . . . . . . . . . . . . . . . . . . 48
FX1N-CNV-BD . . . . . . . . . . . . . . . . . . . . . 48
FX1N-EEPROM-8L. . . . . . . . . . . . . . . . . . . 50
FX1S series
Base units . . . . . . . . . . . . . . . . . . . . . . 14
Specifications . . . . . . . . . . . . . . . . . . . 15
System description . . . . . . . . . . . . . . . . 13
FX1S-10MR-DS . . . . . . . . . . . . . . . . . . . . 14
FX1S-10MR-ES/UL . . . . . . . . . . . . . . . . . . 14
FX1S-10MT-DSS . . . . . . . . . . . . . . . . . . . . 14
FX1S-14MR-DS . . . . . . . . . . . . . . . . . . . . 14
FX1S-14MR-ES/UL . . . . . . . . . . . . . . . . . . 14
FX1S-14MT-DSS . . . . . . . . . . . . . . . . . . . . 14
FX1S-20MR-DS . . . . . . . . . . . . . . . . . . . . 14
FX1S-20MR-ES/UL . . . . . . . . . . . . . . . . . . 14
FX1S-20MT-DSS . . . . . . . . . . . . . . . . . . . . 14
FX1S-30MR-DS . . . . . . . . . . . . . . . . . . . . 14
FX1S-30MR-ES/UL . . . . . . . . . . . . . . . . . . 14
FX1S-30MT-DSS . . . . . . . . . . . . . . . . . . . . 14
FX2N-10PG . . . . . . . . . . . . . . . . . . . . . . . 38
FX2N-16CCL-M. . . . . . . . . . . . . . . . . . . . . 39
FX2N-16EX-ES/UL . . . . . . . . . . . . . . . . . . 31
FX2N-16EYR-ES/UL. . . . . . . . . . . . . . . . . . 31
FX2N-16EYT-ESS/UL . . . . . . . . . . . . . . . . . 31
FX2N-1HC . . . . . . . . . . . . . . . . . . . . . . . . 37
FX2N-1PG-E . . . . . . . . . . . . . . . . . . . . . . 38
FX2N-232IF . . . . . . . . . . . . . . . . . . . . . . . 46
FX2N-2AD . . . . . . . . . . . . . . . . . . . . . . . . 33
FX2N-2DA . . . . . . . . . . . . . . . . . . . . . . . . 33
FX2N-2LC . . . . . . . . . . . . . . . . . . . . . . . . 34
FX2N-32ASI-M. . . . . . . . . . . . . . . . . . . . . 40
FX2N-32CAN . . . . . . . . . . . . . . . . . . . . . . 44
FX2N-32CCL . . . . . . . . . . . . . . . . . . . . . . 40
FX2N-32DP-IF . . . . . . . . . . . . . . . . . . . . . 43
FX2N-32DP-IF-D. . . . . . . . . . . . . . . . . . . . 43
FX2N-32ER-ES/UL . . . . . . . . . . . . . . . . . . 30
FX2N-32ET-ESS/UL . . . . . . . . . . . . . . . . . . 30
FX2N-48ER-DS . . . . . . . . . . . . . . . . . . . . . 30
FX2N-48ER-ES/UL . . . . . . . . . . . . . . . . . . 30
FX2N-48ET-DSS . . . . . . . . . . . . . . . . . . . . 30
FX2N-48ET-ESS/UL . . . . . . . . . . . . . . . . . . 30
FX2N-4AD . . . . . . . . . . . . . . . . . . . . . . . . 33
FX2N-4AD-PT . . . . . . . . . . . . . . . . . . . . . 34
FX2N-4AD-TC. . . . . . . . . . . . . . . . . . . . . . 34
FX2N-4DA . . . . . . . . . . . . . . . . . . . . . . . . 33
FX2N-5A . . . . . . . . . . . . . . . . . . . . . . . . . 34
FX2N-64DNET . . . . . . . . . . . . . . . . . . . . . 44
FX2N-8AD . . . . . . . . . . . . . . . . . . . . . . . . 33
FX2N-8ER-ES/UL . . . . . . . . . . . . . . . . . . . 31
FX2N-8EX-ES/UL . . . . . . . . . . . . . . . . . . . 31
FX2N-8EYR-ES/UL . . . . . . . . . . . . . . . . . . 31
FX2N-8EYT-ESS/UL . . . . . . . . . . . . . . . . . . 31
FX2NC-16EX-DS . . . . . . . . . . . . . . . . . . . . 32
FX2NC-16EX-T-DS. . . . . . . . . . . . . . . . . . . 32
FX2NC-16EYR-T-DS. . . . . . . . . . . . . . . . . . 32
FX2NC-16EYT-DSS . . . . . . . . . . . . . . . . . . 32
FX2NC-1HC . . . . . . . . . . . . . . . . . . . . . . . 37
FX2NC-232ADP . . . . . . . . . . . . . . . . . . . . 45
FX2NC-32BL . . . . . . . . . . . . . . . . . . . . . . 53
FX2NC-32EX-DS . . . . . . . . . . . . . . . . . . . . 32
FX2NC-32EYT-DSS . . . . . . . . . . . . . . . . . . 32
FX2NC-485ADP . . . . . . . . . . . . . . . . . . . . 45
FX2NC-CNV-IF . . . . . . . . . . . . . . . . . . . . . 50
FX2NC-ENET-ADP . . . . . . . . . . . . . . . . . . . 41
FX3G series
Base units . . . . . . . . . . . . . . . . . . . . . . 20
Specifications . . . . . . . . . . . . . . . . . . . 21
System description . . . . . . . . . . . . . . . 19
FX3G-14MR/DS . . . . . . . . . . . . . . . . . . . . 20
FX3G-14MR/ES . . . . . . . . . . . . . . . . . . . . 20
FX3G-14MT/DSS. . . . . . . . . . . . . . . . . . . . 20
FX3G-14MT/ESS . . . . . . . . . . . . . . . . . . . . 20
FX3G-1DA-BD . . . . . . . . . . . . . . . . . . . . . 47
FX3G-232-BD. . . . . . . . . . . . . . . . . . . . . . 49
FX3G-24MR/DS . . . . . . . . . . . . . . . . . . . . 20
FX3G-24MR/ES . . . . . . . . . . . . . . . . . . . . 20
FX3G-24MT/DSS. . . . . . . . . . . . . . . . . . . . 20
FX3G-24MT/ESS . . . . . . . . . . . . . . . . . . . . 20
FX3G-2AD-BD . . . . . . . . . . . . . . . . . . . . . 47
FX3G-40MR/DS . . . . . . . . . . . . . . . . . . . . 20
FX3G-40MR/ES . . . . . . . . . . . . . . . . . . . . 20
FX3G-40MT/DSS. . . . . . . . . . . . . . . . . . . . 20
FX3G-40MT/ESS . . . . . . . . . . . . . . . . . . . . 20
FX3G-422-BD. . . . . . . . . . . . . . . . . . . . . . 49
FX3G-485-BD. . . . . . . . . . . . . . . . . . . . . . 49
FX3G-5DM . . . . . . . . . . . . . . . . . . . . . . . 55
FX3G-60MR/DS . . . . . . . . . . . . . . . . . . . . 20
FX3G-60MR/ES . . . . . . . . . . . . . . . . . . . . 20
FX3G-60MT/DSS. . . . . . . . . . . . . . . . . . . . 20
FX3G-60MT/ESS . . . . . . . . . . . . . . . . . . . . 20
FX3G-8AV-BD . . . . . . . . . . . . . . . . . . . . . 48
FX3G-CNV-ADP . . . . . . . . . . . . . . . . . . . . 48
FX3G-EEPROM-32L . . . . . . . . . . . . . . . . . . 50
FX3U series
Base units . . . . . . . . . . . . . . . . . . . . . . 23
Specifications . . . . . . . . . . . . . . . . . . . 25
System description . . . . . . . . . . . . . . . . 22
FX3U-128MR/ES . . . . . . . . . . . . . . . . . . . 24
FX3U-128MT/ESS . . . . . . . . . . . . . . . . . . . 24
FX3U-16MR/DS . . . . . . . . . . . . . . . . . . . . 23
FX3U-16MR/ES . . . . . . . . . . . . . . . . . . . . 23
FX3U-16MT/DSS. . . . . . . . . . . . . . . . . . . . 23
FX3U-16MT/ESS . . . . . . . . . . . . . . . . . . . . 23
FX3U-1PSU-5V. . . . . . . . . . . . . . . . . . . . . 53
FX3U-20SSC-H . . . . . . . . . . . . . . . . . . . . 38
FX3U-232-BD . . . . . . . . . . . . . . . . . . . . . 49
FX3U-232ADP . . . . . . . . . . . . . . . . . . . . . 45
FX3U-2HC . . . . . . . . . . . . . . . . . . . . . . . . 37
FX3U-2HSY-ADP. . . . . . . . . . . . . . . . . . . . 37
FX3U-32BL . . . . . . . . . . . . . . . . . . . . . . . 53
FX3U-32DP . . . . . . . . . . . . . . . . . . . . . . . 43
FX3U-32MR/DS . . . . . . . . . . . . . . . . . . . . 23
FX3U-32MR/ES . . . . . . . . . . . . . . . . . . . . 23
FX3U-32MT/DSS. . . . . . . . . . . . . . . . . . . . 23
FX3U-32MT/ESS . . . . . . . . . . . . . . . . . . . . 23
FX3U-3A-ADP . . . . . . . . . . . . . . . . . . . . . 34
FX3U-422-BD . . . . . . . . . . . . . . . . . . . . . 49
FX3U-485-BD . . . . . . . . . . . . . . . . . . . . . 49
FX3U-485ADP-MB . . . . . . . . . . . . . . . . . . 45
FX3U-48MR/DS . . . . . . . . . . . . . . . . . . . . 24
FX3U-48MR/ES . . . . . . . . . . . . . . . . . . . . 24
FX3U-48MT/DSS. . . . . . . . . . . . . . . . . . . . 24
FX3U-48MT/ESS . . . . . . . . . . . . . . . . . . . . 24
FX3U-4AD . . . . . . . . . . . . . . . . . . . . . . . . 33
FX3U-4AD-ADP . . . . . . . . . . . . . . . . . . . . 35
FX3U-4AD-PNK-ADP . . . . . . . . . . . . . . . . . 35
FX3U-4AD-PT-ADP . . . . . . . . . . . . . . . . . . 35
FX3U-4AD-PTW-ADP . . . . . . . . . . . . . . . . 35
FX3U-4AD-TC-ADP . . . . . . . . . . . . . . . . . . 35
FX3U-4DA . . . . . . . . . . . . . . . . . . . . . . . . 33
FX3U-4DA-ADP . . . . . . . . . . . . . . . . . . . . 35
FX3U-4HSX-ADP. . . . . . . . . . . . . . . . . . . . 37
FX3U-4LC . . . . . . . . . . . . . . . . . . . . . . . . 36
FX3U-64CCL . . . . . . . . . . . . . . . . . . . . . . 39
FX3U-64DP-M . . . . . . . . . . . . . . . . . . . . . 42
FX3U-64MR/DS . . . . . . . . . . . . . . . . . . . . 24
FX3U-64MR/ES . . . . . . . . . . . . . . . . . . . . 24
FX3U-64MT/DSS. . . . . . . . . . . . . . . . . . . . 24
FX3U-64MT/ESS . . . . . . . . . . . . . . . . . . . . 24
FX3U-7DM . . . . . . . . . . . . . . . . . . . . . . . 55
FX3U-7DM-HLD . . . . . . . . . . . . . . . . . . . . 55
FX3U-80MR/DS . . . . . . . . . . . . . . . . . . . . 24
FX3U-80MR/ES . . . . . . . . . . . . . . . . . . . . 24
FX3U-80MT/DSS. . . . . . . . . . . . . . . . . . . . 24
FX3U-80MT/ESS . . . . . . . . . . . . . . . . . . . . 24
FX3U-CF-ADP . . . . . . . . . . . . . . . . . . . . . 36
FX3U-CNV-BD . . . . . . . . . . . . . . . . . . . . . 48
FX3U-ENET . . . . . . . . . . . . . . . . . . . . . . . 41
FX3U-FLROM-16 . . . . . . . . . . . . . . . . . . . 50
FX3U-FLROM-64 . . . . . . . . . . . . . . . . . . . 50
FX3U-FLROM-64L. . . . . . . . . . . . . . . . . . . 50
FX3U-USB-BD . . . . . . . . . . . . . . . . . . . . . 48
FX3UC-16MT/DSS. . . . . . . . . . . . . . . . . . . 27
FX3UC-1PS-5V . . . . . . . . . . . . . . . . . . . . . 53
FX3UC-32MT/DSS. . . . . . . . . . . . . . . . . . . 27
FX3UC-4AD . . . . . . . . . . . . . . . . . . . . . . . 33
FX3UC-64MT/DSS. . . . . . . . . . . . . . . . . . . 27
FX3UC-96MT/DSS. . . . . . . . . . . . . . . . . . . 27
FX3UC-Serie
Base Units . . . . . . . . . . . . . . . . . . . . . . 27
Specifications . . . . . . . . . . . . . . . . . . . 28
System description . . . . . . . . . . . . . . . . 26
G
GX Configurator DP. . . . . . . . . . . . . . . . . . 65
GX Developer. . . . . . . . . . . . . . . . . . . . . . 64
GX IEC Developer . . . . . . . . . . . . . . . . . . . 64
H
High speed counter . . . . . . . . . . . . . . . . . 37
I
Interface Adapters . . . . . . . . . . . . . . . . . . 49
Interface modules . . . . . . . . . . . . . . . . . . 45
M
Memory Media . . . . . . . . . . . . . . . . . . . . 12,
N
Network modules. . . . . . . . . . . . . . . . . . . 39
P
Positioning modules. . . . . . . . . . . . . . . . . 38
Power supply units . . . . . . . . . . . . . . . . . . 53
24 V . . . . . . . . . . . . . . . . . . . . . . . . . . 53
5 V . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
S
SC-09 . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Sample Calculations . . . . . . . . . . . . . . . . . . 7
Ship approvals . . . . . . . . . . . . . . . . . . . . . 67
Software
AL-PCS/WIN . . . . . . . . . . . . . . . . . . . . 63
FX Configurator FP V0100-1LOC-E . . . . . . 65
FX-TRN-BEG-E . . . . . . . . . . . . . . . . . . . 63
GX Configurator DP V0500-1L0C-E . . . . . 65
GX DEVELOPER FX V0878-1L0C-M . . . . . . 64
GX DEVELOPER FX V0878-2L0C-M_2&MORE 64
GX Developer V0800-1LOC-E . . . . . . . . . 64
GX Developer V0800-1LOC-G . . . . . . . . . 64
Specifications
ALPHA 2 . . . . . . . . . . . . . . . . . . . . . . . . 9
FX1N series . . . . . . . . . . . . . . . . . . . . . 18
FX1S series . . . . . . . . . . . . . . . . . . . . . 15
FX3G . . . . . . . . . . . . . . . . . . . . . . . . . 21
FX3U series . . . . . . . . . . . . . . . . . . . . . 25
FX3UC series . . . . . . . . . . . . . . . . . . . . 28
System description
ALPHA 2 series. . . . . . . . . . . . . . . . . . . . 8
FX1N series . . . . . . . . . . . . . . . . . . . . . 16
FX1S series . . . . . . . . . . . . . . . . . . . . . 13
FX3G Series . . . . . . . . . . . . . . . . . . . . . 19
FX3U series . . . . . . . . . . . . . . . . . . . . . 22
FX3UC series . . . . . . . . . . . . . . . . . . . . 26
MELSEC PLC Systems. . . . . . . . . . . . . . . . 4
T
TB-16EX-C. . . . . . . . . . . . . . . . . . . . . . . . 51
TB-16EX-S. . . . . . . . . . . . . . . . . . . . . . . . 51
TB-20-S . . . . . . . . . . . . . . . . . . . . . . . . . 51
TB-20C . . . . . . . . . . . . . . . . . . . . . . . . . . 51
TB-8EX-C . . . . . . . . . . . . . . . . . . . . . . . . 51
TB-8EX-S. . . . . . . . . . . . . . . . . . . . . . . . . 51
TB-8EY-C. . . . . . . . . . . . . . . . . . . . . . . . . 51
TB-8EY-S. . . . . . . . . . . . . . . . . . . . . . . . . 51
TB-8RELAY-6A . . . . . . . . . . . . . . . . . . . . . 51
TB-8TRANSISTOR-2A. . . . . . . . . . . . . . . . . 51
TB-CON-5-C. . . . . . . . . . . . . . . . . . . . . . . 52
TB-CON10-C . . . . . . . . . . . . . . . . . . . . . . 52
TB-EX-CAB-1M. . . . . . . . . . . . . . . . . . . . . 52
TB-EX-CAB-3M. . . . . . . . . . . . . . . . . . . . . 52
TB-EX-CAB-5M. . . . . . . . . . . . . . . . . . . . . 52
TB-EY-CAB-1M. . . . . . . . . . . . . . . . . . . . . 52
TB-EY-CAB-3M. . . . . . . . . . . . . . . . . . . . . 52
TB-EY-CAB-5M. . . . . . . . . . . . . . . . . . . . . 52
Temperature control module . . . . . . . . . . . 36
MITSUBISHI ELECTRIC 69
70 MITSUBISHI ELECTRIC
Application solutions /// Application solutions /// Application solutions /// Automation solutions /// Automation solutions /// Automation solutions
A world of automation solutions
Robots
Motion control and servos
Inverters
LV circuit protection
Laser machines
CNC controllers
HMI and GOTs
EDM machines
Micro PLCs
Modular PLCs
Mitsubishi offer a wide range of automation equipment from PLCs and HMIs to CNC and EDM machines.
A name to trust
Since its beginnings in 1870, some
45 companies use the Mitsubishi name, covering a spectrum of finance, commerce and industry.
This is why you can rely on a Mitsubishi automation solution – because we know first hand about the need for reliable, efficient, easy-to-use automation and control in our own factories.
The Mitsubishi brand name is recognized around the world as a symbol of premium quality.
Mitsubishi Electric Corporation is active in space development, transportation, semiconductors, energy systems, communications and information processing, audio visual equipment, home electronics, building and energy management and automation systems, and has 237 factories and laboratories worldwide in over 121 countries.
As one of the world’s leading companies with a global turnover of over 4 trillion
Yen (over $40 billion), employing over
100,000 people, Mitsubishi Electric has the resource and the commitment to deliver the ultimate in service and support as well as the best products.
Global Partner.
Local Friend.
EUROPEAN BRANCHES
MITSUBISHI ELECTRIC EUROPE B.V.
GERMANY
Gothaer Straße 8
D-40880 Ratingen
Phone: +49 (0)2102 / 486-0
MITSUBISHI ELECTRIC EUROPE B.V.
CZECH REPUBLIC
Radlická 714/113a
CZ-158 00 Praha 5
Phone: +420 - 251 551 470
MITSUBISHI ELECTRIC EUROPE B.V.
25, Boulevard des Bouvets
F-92741 Nanterre Cedex
Phone: +33 (0)1 / 55 68 55 68
FRANCE
MITSUBISHI ELECTRIC EUROPE B.V.
Viale Colleoni 7
I-20041 Agrate Brianza (MB)
Phone: +39 039 / 60 53 1
ITALY
MITSUBISHI ELECTRIC EUROPE B.V.
Krakowska 50
PL-32-083 Balice
Phone: +48 (0)12 / 630 47 00
POLAND
MITSUBISHI ELECTRIC EUROPE B.V.
SPAIN
Carretera de Rubí 76-80
E-08190 Sant Cugat del Vallés (Barcelona)
Phone: 902 131121 // +34 935653131
MITSUBISHI ELECTRIC EUROPE B.V.
Travellers Lane
UK-Hatfield, Herts. AL10 8XB
Phone: +44 (0)1707 / 27 61 00
UK
EUROPEAN REPRESENTATIVES
GEVA
Wiener Straße 89
AT-2500 Baden
AUSTRIA
Phone: +43 (0)2252 / 85 55 20
TEHNIKON BELARUS
Oktyabrskaya 16/5, Off. 703-711
BY-220030 Minsk
Phone: +375 (0)17 / 210 46 26
AutoCont C.S. s.r.o.
CZECH REPUBLIC
Technologická 374/6
CZ-708 00 Ostrava-Pustkovec
Phone: +420 595 691 150
KAZPROMAUTOM. Ltd.
KAZAKHSTAN
Mustafina Str. 7/2
KAZ-470046 Karaganda
Phone: +7 7212 / 50 11 50
B:ELECTRIC, s.r.o.
CZECH REPUBLIC
Mladoboleslavská 812
CZ-197 00 Praha 19 - Kbely
Phone: +420 286 850 848
Beijer Electronics SIA
Ritausmas iela 23
LV-1058 Riga
Phone: +371 (0)784 / 2280
LATVIA
Beijer Electronics AS
Postboks 487
NO-3002 Drammen
Phone: +47 (0)32 / 24 30 00
NORWAY
Sirius Trading & Services ROMANIA
Aleea Lacul Morii Nr. 3
RO-060841 Bucuresti, Sector 6
Phone: +40 (0)21 / 430 40 06
Beijer Electronics AB
Box 426
SE-20124 Malmö
Phone: +46 (0)40 / 35 86 00
SWEDEN
Omni Ray AG
Im Schörli 5
CH-8600 Dübendorf
SWITZERLAND
Phone: +41 (0)44 / 802 28 80
TEXEL ELECTRONICS Ltd.
2 Ha´umanut, P.O.B. 6272
IL-42160 Netanya
Phone: +972 (0)9 / 863 39 80
ISRAEL
CEG INTERNATIONAL LEBANON
Cebaco Center/Block A Autostrade DORA
Lebanon - Beirut
Phone: +961 (0)1 / 240 430
ESCO D & A
Culliganlaan 3
BE-1831 Diegem
Phone: +32 (0)2 / 717 64 30
BELGIUM Beijer Electronics A/S
Lykkegårdsvej 17
DENMARK
DK-4000 Roskilde
Phone: +45 (0)46/ 75 76 66
Beijer Electronics UAB LITHUANIA
Savanoriu Pr. 187
LT-02300 Vilnius
Phone: +370 (0)5 / 232 3101
Craft Con. & Engineering d.o.o.
SERBIA
Bulevar Svetog Cara Konstantina 80-86
SER-18106 Nis
Phone: +381 (0)18 / 292-24-4/5
GTS TURKEY
Bayraktar Bulvari Nutuk Sok. No:5
TR-34775 Yukarı İSTANBUL
Phone: +90 (0)216 526 39 90
CBI Ltd.
Private Bag 2016
SOUTH AFRICA
ZA-1600 Isando
Phone: + 27 (0)11 / 977 0770
Koning & Hartman b.v.
BELGIUM
Woluwelaan 31
BE-1800 Vilvoorde
Phone: +32 (0)2 / 257 02 40
Beijer Electronics Eesti OÜ ESTONIA
Pärnu mnt.160i
EE-11317 Tallinn
Phone: +372 (0)6 / 51 81 40
ALFATRADE Ltd.
99, Paola Hill
Malta- Paola PLA 1702
Phone: +356 (0)21 / 697 816
MALTA INEA SR d.o.o.
Izletnicka 10
SER-113000 Smederevo
Phone: +381 (0)26 / 617 163
SERBIA CSC Automation Ltd.
4-B, M. Raskovoyi St.
UKRAINE
UA-02660 Kiev
Phone: +380 (0)44 / 494 33 55
INEA BH d.o.o.
BOSNIA AND HERZEG.
Aleja Lipa 56
BA-71000 Sarajevo
Phone: +387 (0)33 / 921 164
Beijer Electronics OY
Peltoie 37
FIN-28400 Ulvila
FINLAND
Phone: +358 (0)207 / 463 540
INTEHSIS srl bld. Traian 23/1
MD-2060 Kishinev
MOLDOVA
Phone: +373 (0)22 / 66 4242
AutoCont Control s.r.o.
SLOVAKIA
Radlinského 47
SK-02601 Dolny Kubin
Phone: +421 (0)43 / 5868210
AKHNATON BULGARIA
4 Andrej Ljapchev Blvd. Pb 21
BG-1756 Sofia
Phone: +359 (0)2 / 817 6004
UTECO A.B.E.E.
5, Mavrogenous Str.
GR-18542 Piraeus
Phone: +30 211 / 1206 900
GREECE HIFLEX AUTOM. B.V.
NETHERLANDS
Wolweverstraat 22
NL-2984 CD Ridderkerk
Phone: +31 (0)180 – 46 60 04
CS MTrade Slovensko, s.r.o.
SLOVAKIA
Vajanskeho 58
SK-92101 Piestany
Phone: +421 (0)33 / 7742 760
INEA CR d.o.o.
Losinjska 4 a
HR-10000 Zagreb
CROATIA
Phone: +385 (0)1 / 36 940 - 01/ -02/ -03
MELTRADE Ltd.
Fertő utca 14.
HU-1107 Budapest
Phone: +36 (0)1 / 431-9726
HUNGARY Koning & Hartman b.v.
NETHERLANDS
Haarlerbergweg 21-23
NL-1101 CH Amsterdam
Phone: +31 (0)20 / 587 76 00
INEA d.o.o.
Stegne 11
SI-1000 Ljubljana
SLOVENIA
Phone: +386 (0)1 / 513 8100
Mitsubishi Electric Europe B.V. /// FA - European Business Group /// Gothaer Straße 8 /// D-40880 Ratingen /// Germany
Tel.: +49(0)2102 4860 /// Fax: +49(0)2102 4861120 /// [email protected] /// www.mitsubishi-automation.com
Specifications subject to change /// Art.-no. 167840-F /// 10.2010
All trademarks and copyrights acknowledged.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project