Reebok Fitness RBEX33180 User`s manual

Add to my manuals
16 Pages

advertisement

Reebok Fitness RBEX33180 User`s manual | Manualzz

Model No. RBEX33180

Serial No.

Serial

Number

Decal

Q

UESTIONS?

As a manufacturer, we are committed to providing complete customer satisfaction. If you have questions, or if there are missing or damaged parts, we will guarantee complete satisfaction through direct assistance from our factory.

TO AVOID UNNECESSARY

DELAYS, PLEASE CALL DIRECT

TO OUR TOLL-FREE CUSTOMER

HOT LINE. The trained technicians on our customer hot line will provide immediate assistance, free of charge to you.

CUSTOMER HOT LINE:

1-800-999-3756

Mon.ÐFri., 6 a.m.Ð6 p.m. MST

C

AUTION

Read all precautions and instructions in this manual before using this equipment. Keep this manual for future reference.

Patent Pending

U

SER'S

M

ANUAL

Visit our website at www.workoutwarehouse.com

New products, prizes, fitness tips, and much more

T

ABLE OF

C

ONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

HOW TO OPERATE THE EXERCISE CYCLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

MAINTENANCE AND TROUBLE-SHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

HOW TO ORDER REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

I

MPORTANT

P

RECAUTIONS

WARNING: To reduce the risk of serious injury, read the following important precautions before using the REEBOK ¨ CYC6 exercise cycle.

1. Read all instructions in this manual before using the CYC6.

2. It is the responsibility of the owner to ensure that all users of the CYC6 are adequately informed of all precautions. Use the CYC6 only as described in this manual.

10. The pulse sensor is not a medical device.

Various factors, including the user's movement, may affect the accuracy of heart rate readings. The pulse sensor is intended only as an exercise aid in determining heart rate trends in general.

3. Use the CYC6 indoors on a level surface.

Keep the CYC6 away from moisture and dust. Place a mat under the CYC6 to protect the floor or carpet.

11. The CYC6 is intended for in-home use only.

Do not use the CYC6 in a commercial, rental, or institutional setting.

4. Inspect and tighten all parts regularly.

Replace any worn parts immediately.

5. Keep children under the age of 12 and pets away from the CYC6 at all times.

12. CAUTION DECAL PLACEMENT: The decal shown below has been placed on the

CYC6. If the decal is missing, or if it is not legible, please call our Customer Service

Department toll-free at 1-800-999-3756 to order a free replacement decal. Apply the decal in the location shown.

6. The CYC6 should not be used by persons weighing more than 250 pounds.

7. Wear appropriate clothing when exercising; do not wear loose clothing that could become caught on the CYC6. Always wear athletic shoes when using the CYC6.

8. Always keep your back straight when using the CYC6. Do not arch your back.

9. If you feel pain or dizziness while exercising, stop immediately and cool down.

Do not allow children on or around machine.

Keep hands and feet away from moving parts and contact points.

Read owner's manual and follow instructions.

Decal shown at

75% actual size

WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems.

Read all instructions before using. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.

2

B

EFORE

Y

OU

B

EGIN

Congratulations for selecting the new REEBOK ¨ CYC6 exercise cycle. Cycling is one of the most effective exercises for increasing cardiovascular fitness, building endurance and toning the entire body. The REEBOK ¨

CYC6 offers an impressive array of features designed to let you enjoy this healthful exercise in the comfort and privacy of your home.

For your benefit, read this manual carefully before you use the REEBOK ¨ CYC6. If you have additional questions, please call our Customer Service

Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time

(excluding holidays). To help us assist you, please mention the product model number and serial number when calling. The model number is RBEX33180. The serial number can be found on a decal attached to the

REEBOK ¨ CYC6 (see the front cover of this manual).

Before reading further, please familiarize yourself with the parts that are labeled in the drawing below.

Water Bottle Holder

(Bottle not included)

Pulse Sensor

Handlebar

Book Holder

Console

Backrest

Seat

Handlebar Post

FRONT

Side Shield

Seat Knob

Seat Handle

BACK

Pedal Strap

Roller

Pedal

Leveling Pad

RIGHT SIDE

3

A

SSEMBLY

Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.

Assembly requires the included tools and your own adjustable wrench .

PART CHART

Use the part drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page 14. The second number refers to the quantity used in assembly. Note: Some small parts may have been pre-attached for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled.

M8 Flat Washer (18)Ð12 M8 Nylon Locknut (56)Ð8 M4 x 10mm Screw (21)Ð4

M8 Curved Washer (28)Ð8 M6 x 16mm Hex Screw (29)Ð4 Bumper Screw (84)Ð2

M8 x 20mm Button Screw (82)Ð4 M8 x 15mm Button Screw (27)Ð4

M6 x 38mm Hex Screw (88)Ð4 M8 x 70mm Carriage Bolt (72)Ð2

M8 x 80mm Carriage Bolt (63)Ð2

4

1. Attach the Front Stabilizer (2) to the front of the

Frame (1) with two M8 x 70mm Carriage Bolts (72), two M8 Curved Washers (28), and two M8 Nylon

Locknuts (56). Make sure that the Front Stabilizer is turned so the Roller (75) is not touching the floor.

1

2

75

72

1

2. Attach the Rear Stabilizer (3) to the rear of the

Frame (1) with two M8 x 80mm Carriage Bolts (63), two M8 Curved Washers (28), and two M8 Nylon

Locknuts (56).

2

3

56

28

28

56

1

28

56

63

3. While a second person holds the Handlebar Post (6) near the Frame (1) as shown, connect the Upper

Wire Harness (16) to the Lower Wire Harness (87).

Carefully slide the Handlebar Post (6) onto the

Frame (1). Be careful to avoid pinching the Wire

Harnesses (16, 87). Attach the Handlebar Post to the Frame with four M8 x 20mm Button Screws (82) and four M8 Curved Washers (28).

3

82

28

16

87 1

28

6

82

4. The Console (9) requires two ÒAAÓ batteries (not included); alkaline batteries are recommended.

Remove the Battery Cover (17) from the back of the

Console. Press two batteries into the battery clip as shown in the inset drawing. Make sure that the negative (Ð) ends of the batteries are touching

the springs. Reattach the Battery Cover.

Connect the two Pulse Wires (22) to the two wires extending from the Console (9). Next, connect the

Upper Wire Harness (16) to the back of the Console.

Insert all wires into the Handlebar Post (6).

Attach the Console (9) to the Handlebar Post (6) with four M4 x 10mm Screws (21).

5

4

Console

Wires

16

6

9

17

22

Batteries

Battery

Clip

21

5. Attach the Seat (12) to the Seat Carriage (11) with four M6 x 16mm Hex Screws (29) and four M8 Flat

Washers (18).

5

12

11

29

18

6. Attach a Seat Handle (14) to the Seat Carriage (11) with two M8 x 15mm Button Screws (27), two M8

Flat Washers (18), and two M8 Nylon Locknuts (56).

Attach the other Seat Handle (14) to the Seat

Carriage (11) in the same manner.

6

7. Attach the Backrest (13) to the Seat Carriage (11) with four M6 x 38mm Hex Screws (88) and four M8

Flat Washers (18).

7

11

56

18

11

14

29

18

27

14

13

8. Pull the seat knob and slide the Seat Carriage (11) onto the Seat Rail (7).

Refer to the inset drawing. Hold the Bumper Axle

(86) inside of the Seat Rail (7). Attach a Bumper

(85) to each end of the Bumper Axle with a Bumper

Screw (84) as shown. Press the Seat Rail Endcap

(23) into the end of the Seat Rail.

8

88

18

23

84

85

7

7

86

84

85

11

Knob

6

9. Firmly tighten the four 5/16Ó x 1Ó Button Screws (80) in the Seat Carriage (11).

Pull the seat knob and slide the Seat Carriage (11) to the desired position. Release the seat knob and slide the Seat Carriage back and forth slightly until it locks into position.

9

11

80

Knob

10. Identify the Right Pedal (37) (there is an ÒRÓ on the

Right Pedal for identification). Using an adjustable wrench, tighten the Right Pedal clockwise into the right Crank Arm (34).

Tighten the Left Pedal counterclockwise into the left

Crank Arm (not shown).

Adjust the Pedal Strap (38) on the Right Pedal (37) to the desired position. Press the Pedal Strap onto the tab on the Right Pedal.

Adjust the Pedal Strap on the Left Pedal in the same manner (not shown).

10

34 38

37

Tab

11. Make sure that all parts are tightened before you use the exercise cycle. Place a mat beneath the exercise cycle to protect the floor.

7

H

OW TO

O

PERATE THE

E

XERCISE

C

YCLE

HOW TO ADJUST THE POSITION OF THE SEAT

For effective exercise, the seat should be in the proper position. As you pedal, there should be a slight bend in your knees when the pedals are in the farthest position.

To adjust the seat, pull the seat knob and slide the Seat

Carriage (11) to the desired position.

Release the seat knob and slide the

Seat Carriage back and forth slightly until it locks into position.

7 11

Seat Knob

DESCRIPTION OF THE CONSOLE

HOW TO ADJUST THE PEDAL STRAPS

To adjust the pedal straps, first pull the ends of the straps off the tabs on the pedals. Press the straps back onto the tabs using different holes in the straps.

Strap

Tab

Note: If there is a thin sheet of clear plastic on the console, remove it.

The innovative console offers an impressive array of features to help you get the most from your workouts.

When the manual program is selected, you can adjust the pedaling resistance with a touch of a button. As you exercise, the console will display your pedaling speed, the number of Calories you have burned, the elapsed time and the distance you have pedaled. You can even measure your heart rate using the built-in pulse sensor.

The console also offers ten preset workout programs.

Five programs automatically change the pedaling resistance as they guide you through effective workouts, and five programs automatically adjust the pedaling resistance to keep your heart rate near a preselected level during your workouts.

Note: Before the console can be operated, two ÒAAÓ batteries must be installed. For installation instructions, see assembly step 4 on page 5.

8

HOW TO USE THE MANUAL PROGRAM

1

Turn on the power

To turn on the power, press any button on the console or simply begin pedaling. Note: If batteries were just installed, the power will already be on.

2

Select the manual program

Each time the power is turned on, the manual program will automatically be selected, as shown by the ÒP-1Ó in the display. (P-1 is the manual program.) If you have selected a different program, select the manual mode again by pressing the program button repeatedly until the ÒP-1Ó reappears.

3

Begin pedaling and adjust the resistance of the pedals as desired

As you exercise, press the resistance + and Ð buttons to adjust the resistance of the pedals.

Note: After the buttons are pressed, it may take a moment for the selected resistance setting to be reached.

4

Follow your progress with the console display

As you exercise, the matrix on the left side of the display will show your

Matrix progress. During the first minute that you pedal, the first column of the matrix will flash; during the second minute, the second column will flash; during the third minute, the third column will flash, and so on, until the tenth column is flashing. After you have pedaled for ten minutes, the matrix will reset and the first column will begin to flash again.

The matrix will also show the resistance level of the pedals. As you press the resistance + or Ð button, the height of the columns in the matrix will increase or decrease.

In addition to the matrix, the display will show your pedaling speed, the number of Calories you have burned, the elapsed time and the distance you have pedaled. The display will also show your heart rate when the pulse sensor is used

(see step 5).

Note: The console can display speed in miles per hour, kilometers per hour or repetitions per minute.

The letters ÒMPH,Ó

ÒKMH,Ó or ÒRPMÓ will appear in the display to show which unit of measurement is selected. To change the unit of measurement, first hold down the select button for three seconds. Press the resistance + or Ð button to change the unit of measurement. Note: If you select miles per hour, distance will be displayed in miles. If you select kilometers per hour or repetitions per minute, distance will be displayed in kilometers.

5

Measure your heart rate if desired

To use the pulse sensor, place your hands on the metal contacts.

Your palms must be resting on the contacts closest to you and your fingers must be touching the other

Metal Contacts contacts. Avoid moving your hands. After a moment, the heart indicator in the display will begin to flash and your heart rate will be shown. For the most accurate heart rate reading, continue to hold the contacts for about 15 seconds. WARNING: The pulse sensor is not a medical device. Various factors, including the user's movement, may affect the accuracy of heart rate readings. The pulse sensor is intended only as an exercise aid in determining heart rate trends in general.

Note: If your heart rate is not shown, press the resistance Ð button to reset the pulse sensor.

In addition, make sure that your hands are positioned as described above. Be careful not to move your hands excessively or squeeze the metal contacts too tightly.

6

When you are finished exercising, turn off the power

To turn off the power, simply wait for about

three minutes. If the pedals are not moved and the console buttons are not pressed for three minutes, the power will turn off automatically.

9

HOW TO USE A RESISTANCE PROGRAM

1

Turn on the power

To turn on the power, press any button on the console or simply begin pedaling. Note: If batteries were just installed, the power will already be on.

2

Select one of the resistance programs

Each time the power is turned on, the manual program will be selected, as shown by the ÒP-1Ó in the display. To select one of the resistance programs, press the program button repeatedly until a ÒP-2,Ó ÒP-3,Ó

ÒP-4,Ó ÒP-5Ó or ÒP-6Ó appears in the display.

As you select each resistance program, the matrix will show the resistance set-

Matrix tings of the program you have selected.

If you select program 2, for example, the matrix will show that the resistance will gradually increase during the first half of the program and then gradually decrease during the last half of the program.

3

Begin pedaling and follow your progress with the console display

As you exercise, follow your progress with the matrix on the left side of the

Matrix display. During the first minute of the program, the first column of the matrix will flash; during the second minute, the second column will flash; during the third minute, the third column will flash. In addition, the resistance of the pedals will automatically change according to the height of the flashing columnÑthe higher the column is, the greater the resistance will be. After ten minutes, the program will be completed.

Note: If the program is too easy or too difficult, press the resistance + or Ð button to adjust the intensity level of the program. As you press the resistance + or Ð button, the height of the columns in the matrix will increase or decrease.

In addition to the matrix, the display will show your pedaling speed, the number of Calories you have burned, the elapsed time and the distance you have pedaled. The display will also show your heart rate when the pulse sensor is used

(see step 4).

4

Measure your heart rate if desired

Refer to step 5 on page 9.

5

When you are finished exercising, turn off the power

To turn off the power, simply wait for about

three minutes. If the pedals are not moved and the console buttons are not pressed for three minutes, the power will turn off automatically.

HOW TO USE A HEART RATE PROGRAM

1

Turn on the power

To turn on the power, press any button on the console or simply begin pedaling. Note: If batteries were just installed, the power will already be on.

2

Enter your age into the console

Before you use a heart rate program, you must enter your age into the console. To enter your age, first press the select button repeatedly until the letters

ÒAGEÓ and a two-digit number appear at the bottom of the display.

Next, press the resistance + or Ð button repeatedly to enter your age.

After you have entered your age, the display will change back to the main display in six seconds.

3

Select one of the heart rate programs

Each time the power is turned on, the manual program will be selected, as shown by the ÒP-1Ó in the display. To select one of the heart rate programs, press the program button repeatedly until a ÒP-7,Ó ÒP-8,Ó ÒP-9,Ó ÒP10Ó or ÒP11Ó appears in the display.

10

Each heart rate program is designed to keep your heart rate near a preselected percentage of your

maximum heart rate while you exercise. (Your maximum heart rate is estimated by subtracting your age from 220. For example, if you are 30 years old, your maximum heart rate is 190.) the console buttons are not pressed for three minutes, the power will turn off automatically.

HOW TO SET A WORKOUT GOAL

4

Program 7 (P-7) will keep your heart rate near

50% of your maximum heart rate while you exercise; P-8 will keep your heart rate near 60% of your maximum heart rate; P-9 will keep your heart rate near 75% of your maximum heart rate;

P10 will keep your heart rate near 85% of your maximum heart rate; and P11 will keep your heart rate near 95% of your maximum heart rate.

If desired, you can set a workout goal before you begin exercising. If you set a time, distance, or calorie goal, the console will count down the goal as you exercise and sound a tone when the goal is reached. If you set a maximum or minimum heart rate goal, the console will sound a tone to alert you if your heart rate is too high or too low during your workout.

Place your hands on the pulse sensor

See step 5 on page 9.

Follow the instructions below to set a goal. Note: Do not set more than one type of goal at a time.

5

Begin pedaling and follow your progress with the console display

As you exercise, follow your progress with the matrix on the left side of the

Matrix display. During the first ten seconds of the program, the first column of the matrix will flash. After ten seconds, the column will move to

the right and the first column will continue to flash. At the end of every ten seconds, all

columns will move to the right. In addition, the resistance of the pedals will automatically increase or decrease, if necessary, to keep your heart rate near the preselected level. As the resistance changes, the height of the flashing column will also change. After ten minutes, the program will be completed. Important: For the heart rate program to function properly, you must keep your hands on the pulse sensor. If your heart rate is not displayed, see PULSE SEN-

SOR TROUBLE-SHOOTING on page 12.

Time goalÑPress the select button to select the time mode. Next, press the resistance buttons to set a time goal. Each button press will change the goal by 1 minute. After you have set a goal, the display will change back to the main display in six seconds.

Distance goalÑPress the select button repeatedly to select the distance mode.

Next, press the resistance buttons to set a distance goal. Each button press will change the goal by 0.5 miles or kilometers.

Calorie goalÑPress the select button repeatedly to select the calorie mode.

Next, press the resistance buttons to set a calorie goal. Each button press will change the goal by 10 calories.

Note: When a heart rate program is used, the resistance buttons will not function.

In addition to the matrix, the display will show your heart rate, your pedaling speed, the number of Calories you have burned, the elapsed time and the distance you have pedaled.

Heart rate goalÑPress the select button repeatedly to select the maximum or minimum heart rate mode. Next, press the resistance buttons to set a heart rate goal. Each button press will change the heart rate goal by 5 beats per minute.

6

When you are finished exercising, turn off the power

To turn off the power, simply wait for about

three minutes. If the pedals are not moved and

Note: To cancel a goal, press the resistance Ð button for three seconds. Any time that the button is pressed for three seconds, the display will be reset.

11

M

AINTENANCE AND

T

ROUBLE-SHOOTING

Inspect and tighten all parts of the exercise cycle regularly. The exercise cycle can be cleaned with a soft, damp cloth. To prevent damage to the console, keep liquids away from the console and keep the console out of direct sunlight.

BATTERY REPLACEMENT

If the console does not function properly, the batteries should be replaced. To replace the batteries, refer to assembly step 4 on page 5.

HOW TO LEVEL THE EXERCISE CYCLE

If the exercise cycle does not sit flat on the floor, turn one or both of the leveling pads until the exercise cycle is level.

Leveling

Pads

PULSE SENSOR TROUBLE-SHOOTING

¥ Avoid moving your hands while using the pulse sensor. Excessive movement may interfere with heart rate readings.

¥ If your heart rate is not shown when the pulse sensor is used, press the resistance Ð button to reset the pulse sensor.

¥ Do not hold the metal contacts too tightly; doing so may interfere with heart rate readings.

¥ For the most accurate heart rate reading, hold the metal contacts for about 15 seconds.

¥ For optimal performance of the pulse sensor, keep the metal contacts clean. The contacts can be cleaned with a soft clothÑnever use alcohol, abrasives, or chemicals.

12

E

XERCISE

G

UIDELINES

WARNING: Before beginning this or any exercise program, consult your physician.

This is especially important for individuals over the age of 35 or individuals with preexisting health problems.

WARNING: The pulse sensor is not a medical device. Various factors may affect the accuracy of heart rate readings. The pulse sensor is intended only as an exercise aid in determining heart rate trends in general.

Exercise has proven essential for good health and well-being. Regular participation in a well-rounded exercise program results in a stronger and more efficient heart, improved respiratory function, increased stamina, better weight management, increased ability to deal with stress, and greater self-esteem.

EXERCISE INTENSITY

During the first few months of your exercise program, keep your heart rate near the low end of your training zone as you exercise. After a few months of regular exercise, your heart rate can be increased until it is near the middle of your training zone as you exercise.

To measure your heart rate, use the built-in pulse sensor. You can also measure your pulse by placing two fingers on your wrist as shown. Stop exercising and take a sixsecond heartbeat count. Multiply the result by ten to find your heart rate. (A six-second count is used because your heart rate drops quickly when you stop exercising.) If your heart rate is too high, decrease the intensity of your exercise. If your heart rate is too low, increase the intensity of your exercise.

To maximize the benefits of exercising, it is important to exercise with the proper intensity. The proper intensity level can be found by using your heart rate as a guide. For effective aerobic exercise, your heart rate should be maintained at a level between 70% and

85% of your maximum heart rate as you exercise.

This is known as your training zone. You can find your training zone in the table below. Training zones are listed according to age and physical condition.

WORKOUT GUIDELINES

A well-rounded workout includes three important parts:

A warm-up, consisting of 5 to 10 minutes of stretching and light exercise. A proper warm-up increases your body temperature, heart rate, and circulation in preparation for exercise.

Training zone exercise, consisting of 20 to 40 minutes of exercising with your heart rate in your training zone. (During the first few weeks of your exercise program, do not keep your heart rate in your training zone for longer than 20 minutes.)

AGE

55

60

65

70

75

80

20

25

30

35

40

45

50

UNCONDITIONED

138Ð167

136Ð166

135Ð164

134Ð162

132Ð161

131Ð159

129Ð156

127Ð155

126Ð153

125Ð151

123Ð150

122Ð147

120Ð146

TRAINING ZONE (BEATS/MIN.)

CONDITIONED

133Ð162

132Ð160

130Ð158

129Ð156

127Ð155

125Ð153

124Ð150

122Ð149

121Ð147

119Ð145

118Ð144

117Ð142

115Ð140

A cool-down, with 5 to 10 minutes of stretching. This will increase the flexibility of your muscles and will help to prevent post-exercise problems.

EXERCISE FREQUENCY

To maintain or improve your condition, plan three workouts each week, with at least one day of rest between workouts. After a few months of regular exercise, you may complete up to five workouts each week, if desired. Caution: Be sure to progress at your own pace and avoid overdoing it. Incorrect or excessive training may result in injury to your health.

Remember, the key to success is make exercise a regular and enjoyable part of your everyday life.

13

14

15

H

OW TO

O

RDER

R

EPLACEMENT

P

ARTS

To order replacement parts, call our Customer Service Department toll-free at 1-800-999-3756, Monday through

Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be prepared to give the following information:

¥ The MODEL NUMBER of the product (RBEX33180).

¥ The NAME of the product (REEBOK ¨ CYC6 exercise cycle).

¥ The SERIAL NUMBER of the product (see the front cover of this manual).

¥ The KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST on page 14 of this manual).

REEBOK and the Vector Logo are registered trademarks and service marks of Reebok. This product is manufactured and distributed under license from Reebok International.

L

IMITED

W

ARRANTY

ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of ninety (90) days from the date of purchase. This warranty extends only to the original purchaser. ICON's obligation under this warranty is limited to replacing or repairing, at ICON's option, the product through one of its authorized service centers.

All repairs for which warranty claims are made must be pre-authorized by ICON. This warranty does not extend to any product or damage to a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal usage or repairs not provided by an ICON authorized service center, products used for commercial or rental purposes, or products used as store display models. No other warranty beyond that specifically set forth above is authorized by ICON.

ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use or performance of the product or damages with respect to any economic loss, loss of property, loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or other consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not apply to you.

The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above limitation may not apply to you.

This warranty gives you specific legal rights. You may also have other rights which vary from state to state.

ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813

Part No. 149963 R1198A Printed in Taiwan © 1998 ICON Health & Fitness, Inc.

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement