MFN

Automatic Frepuency Switch

TM

User's manual

1.Front Panel

Ant. In(1) Rear Display(2) Audio Out R/L(3)

Front Display(2) Power(4)

(1) Ant. In: Antenna connection port (NOTE: This unit provides +5V antenna power on these inputs for 5V

active antennas)

(2) VIDEO OUT: Output ports for connection to car monitors. Connect the video output "FRONT and

REAR"with the video inputs of your monitors. The video output "FRONT"can be controlled by the

vehicles handbrake fo avoid danger.

(3) AUDIO OUT R/L: Audio R/L which can be connected to a head unit with stereo amplifier inputs (if

supported).

(4) POWER: Wiring Connection Input harness. The power input is supported either 12V or24V car power

system. connect the red ACC cable to the accessories cable of your vehicles

Use the blue +12V output cable to power your active antennas. If your active antenna could support the

5V power through RF ,input don’t need to connect this +12V cable connect the yellow BAT+ cable with the (+) pole of battery connect both black GND cable to the vehicles chassis ground

AV INPUT

IR

USB

IR. In(5) USB Port(6) AV Input(7)

(5) IR. In: Port for connecting the infrared receiver module.(must be connected)

(6) USB Port: For reading USB memory stick.(Max.8GB)

(7) AV Input: Audio/video signal input for external devices such as DVD ,GPS.

2.Remote Help

1.ON /OFF-Turn the TV tuner ON/OFF.

2.Mute-Mute the audio output.

3.Numeric key(0~9) or channel numbers.

4.Vol.+/--adjust the volume.

5.CH.+ / - - Changes to the next / previous channel.

6.Increases/decreases the volume level in no-menu

mode. Moves the cursor in menu mode.

7.Up/Down-Changes the current channel to the

next /previous channel in no-menu mode. Moves the

cursor up/downwards in menu mode.

8.OK-Calls simple channel list in no-menu mode.

Activates the highlighted menu item in menu mode.

9.Exit-Exits from the menu or sub-menu and cancel any

functions.

10.Menu-Shows the main menu.

11.F1-A.In Channel Edit menu, set favourite program.

B. TV program is playing ,press F1, program

description appears.

12.F2-A.In Channel Edit menu ,press F2 to lock the

menu(parental lock).

B .TV program is playing, press F2, Audio language

appears.

13 F3-A.In Channel Edit menu ,press F3 to rename the

channels.

B. TV program is playing, press F3, adjust display

format4:3/16:9.

14 F4-A .In Channel Edit menu ,press F4,to delete the

channels.

B. TV program is playing, press F4 button , auto

terrestrial total scan.

15. EPG- Electronic Program Guide.

16. Fav-Press the Fav button to view the favourite programs.

17.Info-TV program is playing, press the Info button once ,the

info bar at thebottom of screen appears. Press the Info

button twice, the related channel parameters information

appears.

18.TV/Radio:switches between TV and radio channels.

19. Prev. CH: switches between TV/AV-in

20. Sub: Sub function.

21. Text: Teletext function.

20

2

4

6

8

9

11

14

15

17

1

3

7

5

6

7

10

12

16

13

18

19

21

Note:

Please set the type of antenna used correctly as shown in 4.3.3: active antenna On/OFF, if this setting is done wrongly the unit will not work properly.

7