- No category
advertisement
RF Wall Mounted Touch Panel
ML-2830
Wiring diagram
1)Sender Connection Diagram
ML-2830
L L N N
Feature
Backlight
Glass interface(White & Black)
Touch sensitive
Adjust brightness
Parameter
Remote
Part No.
ML-2830
Operation Voltage
100-240VAC
Receiver(purchased separately)
Part No.
Input Voltage
ML-1009FAWi 12-36VDC
Operation
Frequency
434MHz/868MHz
Current
4x5A
Product Size
5
DIMENSIONS
ø/h (mm)
120x75x29.1
Output
4x(60-180)W
Remarks
Touch Sensor
Remarks
Constant voltage
L
110V-230VAC
N
2)Receiver Connection Diagram
12V/24V/36V
Power Supply
Constant Voltage
ML-1009FAWi
RF & WiFi Receiver
Description of buttons
Turn ON/OFF
Save scene into S1/S2/S3.
75.0
Single Color LED Strip
4 zones control seperately or syhchronously, each zone could control multiple receivers.
Installation
Operation
1. Learning ID with SR-1009 series:
Click learning button on RF receiver →
Short Touch a zone button Z1,Z2,Z3 or Z4 →Touch dimming slider
The light flick means ID learnt successfully.
Touch zone button Z1/Z2/Z3/Z4 separately over 2 seconds, which will turn ON/OFF separately.
The backlight blue is ON for the zone, yellow is OFF for the zone.
Notice : Each sender can control 4 different zones separately, each zone can be learned endless receivers , so one sender can cont rol as many receivers as you can.
2. Save and replay
Save: Touch dimming slider to get a color→
Hold any button of S1,S2 or S3 over 2 seconds(4zones work together)
The light flick means successfully saved.
Replay: Short touch button S1,S2 or S3
→
Replay the scene just saved.
Safety & Warnings
1) The product shall be installed and serviced by a qualified person.
2) IP20. Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a water proof enclosure.
3) Always be sure to mount this unit in an area with proper ventilation to avoid overheating.
4) Please check if the output voltage of any LED power supplies used complies with the working voltage of the product.
5) Never connect any cables while power is on and always assure correct connections to avoid short circuits before switching on.
6) Please ensure that the cable is secured tightly to the connector.
7) For latest information please visit our website www.melec.com.au.
Warranty Agreement
1) We provide lifelong technical assistance with this product:
5 year warranty. Every product has printed date on, for example: 1125 means year 2011, week 25.The warranty is for free repair or replacement and covers manufacturing faults only. For faults beyond the 5-year warranty we reserve the right to charge for time and parts.
2) Warranty is void if:
Any defects are caused by wrong operation.
Any damages are caused by unauthorized removal, maintenance, modifying, incorrect connection and replacement of components.
Any damages are due to transportation, vibration etc. after purchase.
Any damages are caused by earthquake, fire, lightning, pollution and abnormal voltage.
Any damages are caused by negligence, inappropriate storing at high temperatures and humidity or near harmful chemicals.
Product has been updated or changed.
3) Repair or replacement as provided under this warranty is the exclusive remedy to the customer.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project