NETGEAR MR6110 5G Mobile Router User Guide

1. GET TO KNOW YOUR DEVICE

QUICK START

5G Mobile Hotspot

To use your mobile hotspot, you need a valid, activated nano SIM card and a data plan from your mobile provider. For more information, scan the QR code or visit netgear.com/mobile-setup.

For more detailed information about setting up and using your mobile hotspot, scan the QR code to download the Nighthawk M6 user manual or visit netgear.com/m6usermanual.

Your mobile hotspot comes packaged with the following components:

• Nighthawk® M6 5G Mobile Hotspot

• Battery cover

• Battery

• USB Type-C cable

• Power adapter

Touch screen

2. INSTALL THE SIM AND BATTERY

Battery cover

Battery

Nano SIM card

Make sure that your nano SIM card matches the orientation shown on the device label and gently insert it, then install the battery and back cover.

NOTE: Only use your fingers to insert or remove the nano

SIM card. Using other objects might damage your device.

To charge the battery, connect the USB cable to the mobile hotspot, then plug it into a wall socket using the AC power adapter or a computer USB port.

Back

Home Power button

NETGEAR, Inc.

350 East Plumeria Drive

San Jose, CA 95134, USA

NETGEAR INTERNATIONAL LTD

Floor 6, Penrose Two,

Penrose Dock, Cork,

T23 YY09, Ireland

© NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of

NETGEAR, Inc. Any non-NETGEAR trademarks are used for reference purposes only.

March 2023

External antenna port (TS-9)

USB

Type-C port

Ethernet port

External antenna port (TS-9)

3. SET UP YOUR MOBILE HOTSPOT

Press and hold the Power button for two seconds, then follow the onscreen instructions to set up a unique WiFi network name and password.

Customizing your WiFi settings helps to protect your mobile hotspot’s WiFi network.

When setup is complete, your hotspot displays the home screen:

Signal strength

Mobile network

Battery charge

4. CONNECT TO THE INTERNET

You can connect to the Internet by using your mobile hotspot’s QR code from a smartphone, or by manually selecting your hotspot’s WiFi network name and entering the password.

QR code connect from a smartphone

1. Tap the QR code icon on the mobile hotspot’s LCD home screen.

WiFi network name and password

WiFi quick connect

QR code

QR code icon

A QR code displays.

2. Open your phone’s camera app and aim at the QR code.

Your phone connects to the mobile hotspot WiFi network.

NOTE: When idle, the touch screen goes dark to save power. Quickly press and release the Power button to wake the screen.

MANAGE SETTINGS WITH THE

NETGEAR MOBILE APP

Use the NETGEAR Mobile app to change your

WiFi network name and password. You can also use it to play and share media, and access advanced mobile hotspot features.

1. Make sure that your device is connected to the Internet.

2. Scan the QR code to download the NETGEAR Mobile app.

Connect with the WiFi network name and password

1. Open your device’s WiFi network manager.

2. Find your mobile hotspot’s WiFi network name (NTGR_

XXXX) and connect.

WiFi network name and password

3. Enter your mobile hotspot’s WiFi password.

NOTE: If you use an older computer or mobile device and can’t connect to your hotspot, try enabling Dual-

Band (2.4 & 5 GHz) in WiFi Band settings. By default, your hotspot is set to 5 GHz Only to reduce power consumption and extend battery life.

Connect using Ethernet

To extend battery life, Ethernet is disabled by default.

To enable Ethernet, tap Power Manager and change to

Performance Mode .

SUPPORT AND COMMUNITY

From the Web Admin Portal at mywebui.net, click the three-dot icon in the upper-right corner to access help and support files.

For additional information, visit netgear.com/support to access the user manual and to download firmware updates.

You can also check out our NETGEAR Community for helpful advice at community.netgear.com.

REGULATORY AND LEGAL

Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français canadien à https://www.netgear.com/support/download/.

(If this product is sold in Canada, you can access this document in

Canadian French at https://www.netgear.com/support/download/.)

For regulatory compliance information including the EU Declaration of Conformity, visit https://www.netgear.com/about/regulatory/.

See the regulatory compliance document before connecting the power supply.

For NETGEAR’s Privacy Policy, visit https://www.netgear.com/about/privacy-policy.

By using this device, you are agreeing to NETGEAR’s Terms and Conditions at https://www.netgear.com/about/terms-and-conditions. If you do not agree, return the device to your place of purchase within your return period.

Applicable to 6 GHz devices only: Only use the device indoors.

The operation of 6 GHz devices is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet. Opera tion of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems.