Sharp LC-50LB261U User guide

IMPORTANT INFORMATION
50" LED TV
LC-50LB261U
FIND YOUR USER GUIDE ONLINE!
We are going green so a copy of your
User Guide is not provided in the box
but is available online.
For the U.S., go to: www.sharpusa.com/manuals/hd.aspx
For Canada (English), go to:
www.sharp.ca/en-CA/CustomerSupport/Support/ProductDownloads.aspx
For Canada (French), go to:
www.sharp.ca/fr-CA/CustomerSupport/Support/ProductDownloads.aspx
Find your model, then click Download Owner’s Manual.
Your online User Guide opens.
Before using your new product, please read these instructions to
prevent any damage.
CHILD SAFETY
PROPER TELEVISION PLACEMENT MATTERS
THE CONSUMER ELECTRONICS INDUSTRY CARES
•
Manufacturers, retailers and the rest of the consumer electronics industry are
committed to making home entertainment safe and enjoyable.
• As you enjoy your television, please note that all televisions - new and old- must be
supported on proper stands or installed according to the manufacturer's
recommendations. Televisions that are inappropriately situated on dressers,
bookcases, shelves, desks, speakers, chests, carts, etc., may fall over, resulting in
injury.
TUNE IN TO SAFETY
•
•
•
•
•
•
ALWAYS follow the manufacturer’s recommendations for the safe installation of
your television.
ALWAYS read and follow all instructions for proper use of your television.
NEVER allow children to climb on or play on the television or the furniture on which
the television is placed.
NEVER place the television on furniture that can easily be used as steps, such as a
chest of drawers.
ALWAYS install the television where it cannot be pushed, pulled over or knocked
down.
ALWAYS route cords and cables connected to the television so that they cannot be
tripped over, pulled or grabbed.
WALL OR CEILING MOUNT YOUR TELEVISION
•
•
•
•
•
ALWAYS contact your retailer about professional installation if you have any doubts
about your ability to safely mount your television.
ALWAYS use a mount that has been recommended by the television manufacturer
and has a safety certification by an independent laboratory (such as UL, CSA, ETL).
ALWAYS follow all instructions supplied by the television and mount
manufacturers.
ALWAYS make sure that the wall or ceiling where you are mounting the television is
appropriate. Some mounts are not designed to be mounted to walls and ceilings
with steel studs or cinder block construction. If you are unsure, contact a
professional installer.
Televisions can be heavy. A minimum of two people is required for a wall or ceiling
mount installation.
MOVING AN OLDER TELEVISION TO A NEW PLACE IN YOUR
HOME
•
Many new television buyers move their older CRT televisions into a secondary room
after the purchase of a flat-panel television. Special care should be made in the
placement of older CRT televisions.
• ALWAYS place your older CRT television on furniture that is sturdy and appropriate
for its size and weight.
• NEVER place your older CRT television on a dresser where children may be tempted
to use the drawers to climb.
• ALWAYS make sure your older CRT television does not hang over the edge of your
furniture.
2
CE.org/safety
LC-50LB261U
Important Safety
Instructions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates that
dangerous voltage constituting a
risk of electric shock is present
within your TV. This label is located
on the back of your TV.
This symbol indicates that there
are important operating and
maintenance instructions in the
literature accompanying your TV.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
Only use attachments/accessories specified by the
manufacturer.
Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
S3125A
moving the cart/apparatus combination
to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally,
or has been dropped.
The wall plug is the disconnecting device. The plug
must remain readily operable.
16 Remote control batteries should not be exposed to
excessive heat such as sunshine, fire, or the like.
17 The apparatus should not be exposed to dripping or
splashing, and no objects filled with liquids, such as
vases, should be placed on the apparatus.
WARNING
Electric shock hazard
To reduce the risk of fire or electric shock, do not remove
any cover or expose the device to rain or moisture. No
user-serviceable parts are inside. Refer servicing to
qualified service technicians.
Lightning
For added protection for your device receiver during a
lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the power outlet
and disconnect any antenna or cable system. This helps
prevent property damage and personal injury from
lightning and power line surges.
Power lines
An outside antenna system should not be located in the
vicinity of overhead power lines or other electric light or
power circuits, or where it can fall into such power lines or
circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.
Handling the LCD panel
• Your TV’s screen is made of glass. Do not drop your TV
or hit, jolt, or press hard against the LCD panel. If the
screen breaks, be careful of broken glass.
• If the LCD panel is broken, make absolutely sure that
you do not touch the liquid in the panel. This may
cause skin inflammation.
• If the liquid gets in your mouth, immediately gargle,
rinse, and consult with your doctor. Also, if the liquid
gets in your eyes or touches your skin, consult with
your doctor after rinsing for at least 15 minutes or
longer in clean water.
Replacement parts
When replacement parts are required, make sure that the
service technician uses replacement parts specified by the
manufacturer that have the same characteristics as the
original part. Unauthorized substitutions may result in fire,
electric shock, personal injury, or other hazards.
Safety check
After completing any service or repair to this device, ask
the service technician to perform routine safety checks to
determine that your TV is in correct operating condition.
Power source
Operate your TV only from the type of power source
indicated on the marking label. If you are not sure of the
type of power supplied to your home, consult an
electrician or your local power company.
Servicing
These servicing instructions are for use by qualified service
personnel only. To reduce the risk of electric shock, do not
perform any servicing other than that contained in the
operating instructions unless you are qualified to do so.
3
CAUTION
Damage requiring service
Unplug this TV from the power outlet and refer servicing
to qualified service personnel under the following
conditions:
• When the power supply cord or plug is damaged or
frayed.
• If liquid has been spilled or objects have fallen into
your TV.
• If your TV has been exposed to rain or water.
• If your TV does not operate normally by following the
operating instructions. Adjust only those controls
that are covered by the operating instructions
because incorrect adjustment of other controls may
result in damage and will often require extensive
work by a qualified technician to restore your TV to its
normal operation.
• If your TV has been dropped or damaged in any way.
• When your TV exhibits a distinct change in
performance.
Outdoor antenna grounding
If an outside antenna or cable system is connected to your
TV, make sure that the antenna or cable system is
grounded to provide some protection against voltage
surges and built-up static charges. Article 810 of the
National Electrical Code, ANSI/NFPA No. 70, provides
information with respect to correct grounding of the mast
and supporting structure, grounding of the lead-in wire to
an antenna discharge unit, size of grounding conductors,
location of the antenna-discharge unit, connection to
grounding electrodes, and requirements for the grounding
electrode.
Mobile telephone warning
To avoid interference with your TV picture and sound,
operating problems, or even damage, keep your cordless
and cellular telephones away from the TV.
End of life directives
Your TV may contain materials that are regulated for
environmental reasons. Your TV also contains materials
that can be recycled and reused. To help protect the
environment, contact your local authorities for information
about disposal or recycling and about finding a recycler in
your area before you dispose of your TV.
Non-active pixels
The LCD panel contains almost 3 million thin film
transistors, which provide exceptionally sharp video
quality. Occasionally, a few non-active pixels may appear
on the screen as a fixed blue, green, or red point. These
non-active pixels do not adversely affect the performance
of your TV, and are not considered defects.
Troubleshooting
Warning
Do not try to repair your TV yourself. Contact
authorized service personnel.
Remote control
Problem
Remote control does
not work
• Make sure that the power cord is correctly connected to
your TV and a power outlet.
• Make sure that there are no obstructions between the
remote control and the remote control sensor on the front
of the TV.
• Point the remote control directly at the remote control
sensor on your TV. For the location of the remote control
sensor, see “Front view” in your Quick Setup Guide.
• Make sure that the batteries are installed correctly. See
“When can I turn on my TV” in your Quick Setup Guide.
• Replace dead batteries with new batteries. See “When can
I turn on my TV” in your Quick Setup Guide.
Trouble programming
your existing
universal remote
control
• Replace dead batteries with new batteries. Refer to the
User Guide that accompanied your universal remote
control.
• Refer to the User Guide that accompanied your universal
remote control and contact the manufacturer if problems
persist.
1 Antenna lead-in wire
1
2
3
4
5
7
6
2 Grounding clamp
3 Antenna discharge unit
4 Grounding conductors
5 Ground clamps
Power service grounding
6 electrode system
7 Electric service equipment
Note to CATV system installer
Article 820 of the National Electrical Code, ANSI/NFPA No.
40 provides guidance for correct grounding. Specifically, it
states that the cable ground must be connected to the
grounding system of the building as close to the point of
cable entry as practical.
Condensation
Moisture will form on the TV if the TV is brought from cool
surroundings into a warm room or if the temperature of
the room rises suddenly. When this happens, the TV's
performance may be impaired. To prevent this, let the TV
stand in its new surroundings for about an hour before
switching it on, or make sure that the room temperature
rises gradually.
Condensation may also form during the summer if the TV
is exposed to the breeze from an air conditioner. In such
cases, change the location of the TV.
4
Solution
General
Problem
Solution
No power
• Make sure that the power cord is correctly connected to
your TV and a power outlet.
• Unplug the power cord, wait 60 seconds, then plug the
cord back in and turn on your TV.
• Other devices (for example, a surround sound receiver,
external speakers, fans, or hair dryers) may be interfering
with your TV. Try turning off one device at a time to
determine which device is causing interference. After you
have determined which device is causing interference,
move it further from the TV to eliminate the interference.
“No signal” error
message is displayed
• Press INPUT and make sure that you have selected the
correct input for the device or service you are trying to use.
• If you are using a cable or satellite box, use the remote that
came with that box to change channels.
• Make sure that you have the correct input selected to view
channels from the cable or satellite box.
LC-50LB261U
Problem
Screen
Solution
After Auto Channel
Search, there are no
channels
• Reception can vary by channel depending on the broadcast
power level of a given station. Contact your cable or
satellite TV provider.
• Make sure that the antenna or cable/satellite TV is
connected securely to your TV.
• Try replacing the cable between the antenna/cable or
cable/satellite box and your TV.
One or more channels
do not display
• Make sure that the channels are not blocked. See “Set
parental control levels” in the online User Guide.
• Make sure that the channels are not hidden. The channel
may have been deleted from the channel list. You can tune
to the channel by pressing the number buttons or you can
add the channel back to the channel list. See “Hide
channels” in the online User Guide.
• If you are using a cable or satellite box, use the remote that
came with that box to change channels.
• Make sure that you have the correct input selected to view
channels from the cable or satellite box.
• If you are using an antenna, the digital channel signal may
be low. To check the digital channel signal strength, see
“Check the digital signal strength” in the online User Guide.
Password is lost
• Enter 9999 to access parental controls, then set a new
password. See “Set or change the password” in the online
User Guide.
Some settings cannot
be accessed
• If a setting is grayed, the setting is not available in the
current video input mode.
Control buttons do
not work
• Make sure that the Button Block option is set to Off. See
“Lock control buttons” in the online User Guide.
• Unplug the power cord, wait a few seconds, then plug the
cord back in and turn on your TV.
Screen size measured
diagonally
Display type
Panel 60 Hz vs.120 Hz
Display resolution
Panel resolution
Aspect ratio
Contrast ratio
(typical)–panel
Dynamic contrast ratio–
list value
TV Brightness (minimum)
cd/m2
Comb filter
Response time
Horizontal viewing angle
Vertical viewing angle
49.5 in.
LED
120Hz
1080p
1920 (H) × 1080 (V)
16:9
3000:1
4,000,000:1
240 nits
3d y/c digital
5.5 ms
178°
178°
Display resolutions
HDMI suggested resolutions
Component video suggested
resolutions
1080p, 1080i, 720p, 480p, 480i
1080i, 720p, 480p, 480i
Tuner
Analog
Digital
NTSC
ATSC, 8-VSB, Clear-QAM
Inputs
Additional troubleshooting information is in your online
User Guide.
For the U.S., go to:
www.sharpusa.com/manuals/hd.aspx
HDMI
For Canada (English), go to:
www.sharp.ca/en-CA/CustomerSupport/Support/ProductDownloads.aspx
For Canada (French), go to:
Component video
www.sharp.ca/fr-CA/CustomerSupport/Support/ProductDownloads.aspx
Composite video
Find your model, then click Download Owner’s Manual.
Your online User Guide opens.
Shared audio (component
and composite)
PC/VGA
3.5mm PC audio input
Specifications
Specifications are subject to change without notice.
DVI
Dimensions and weight
Without stand
With stand
44.2 × 25.9 × 2.5 in. (112.4 × 65.7 × 6.3 cm)
29.3 lb. (13.3 kg)
44.2 × 27 × 12.2 in. (112.4 × 68.5 × 31 cm)
31.1 lb. (14.1 kg)
USB
Antenna/Cable
3 (side)
E-EDID compliant
HDCP compliant
MHL-enabled and Roku Ready® (HDMI 2/MHL jack)
1 (back)
1 (back)
Shared with component Y
Yes
1 (back)
1 (back)
1 (side)
HDMI 3/DVI jack
1 (side)
Supports JPEG and firmware upgrade
1 (back)
Outputs
Video
Analog audio/Headphone
Digital audio
WiFi
Ethernet
No
1 (side)
1 (optical) (back)
No
No
5
Audio
HDMI
DTS Tuning Package
Speakers
Power
DTS Sound™
Manufactured under license from DTS Licensing Limited.
DTS, the Symbol, & DTS and the Symbol together are
registered trademarks and DTS Sound is a trademark of
DTS, Inc. © DTS, Inc. All Rights Reserved.
On: 120W
Standby: <1W
AC 120 V, 60Hz
Power consumption
Power input
MHL™ (Mobile High-Definition Link)
Miscellaneous
OSD languages
MHL-enabled and
Roku Ready®
English, French, Spanish
Yes
(HDMI 2/MHL jack)
Yes
No
Base to TV screen:
M6 type (20 mm length) (4 pcs)
Yes
Yes
Yes
ENERGY STAR qualified
Internet connectable
TV base screws
V-Chip (version 2.0)
Sleep timer
Channel labeling
VESA mount (mm)
(horizontal × vertical)
VESA mount screws
400 × 200
M6 type
Note
The length of the wall-mount screws vary
depending on the wall-mount bracket you
purchased. See the instructions that came with the
wall-mount bracket for screw lengths.
Legal notices
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
Cables
Connections to this device must be made with shielded cables with
metallic RF/EMI connector hoods to maintain compliance with FCC Rules
and Regulations.
Dolby License Notice and Trademark Acknowledgement
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
6
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
DTS Sound
Number: 2
Watts per channel: 10W
MHL and the MHL logo are trademarks or
registered trademarks of MHL Licensing, LLC
in the United States and other countries.
Roku®
®
Roku and the Roku logo are registered trademarks
of Roku, Inc. in the United States and other
countries.
Energy Star
Your Sharp TV is ENERGY STAR® qualified in the “Energy
Savings” mode. It meets strict energy efficiency guidelines set
by the U.S. Environmental Protection Agency and Department
of Energy. ENERGY STAR is a joint program of these
government agencies, designed to promote energy efficient
products and practices. Changes to certain features, settings,
and functionalities of this TV (i.e. Picture, Sound) can increase
or change the power consumption. Depending upon such
changed settings, the power consumption may exceed the
limits required for the ENERGY STAR qualification in the
“Energy Savings” mode.
LC-50LB261U
One-year limited warranty –
Sharp Televisions
Definitions:
Best Buy (“Warrantor”) warrants to you, the original purchaser of this new
Sharp-branded television (“Product”), that the Product shall be free of
defects in the original manufacturer of the material or workmanship for a
period of one (1) year from the date of your purchase of the Product
(“Warranty Period”). For this warranty to apply, your Product must be
purchased in the United States or Canada from a Best Buy or Future Shop
authorized dealer of Sharp brand products only that are packaged with
this warranty statement.
How long does the coverage last?
The Warranty Period lasts for 1 year (365 days) from the date you
purchased the Product. Your purchase date is printed on the receipt you
received with the Product.
What does this warranty cover?
During the Warranty Period, if the original manufacture of the material or
workmanship of the Product is determined to be defective by an
authorized Warrantor repair center or store personnel, Warrantor will (at its
sole option): (1) repair the Product with new or rebuilt parts; or (2) replace
the Product at no charge with new or rebuilt comparable products or
parts. Products and parts replaced under this warranty become the
property of Warrantor and are not returned to you. If service of Products or
parts are required after the Warranty Period expires, you must pay all labor
and parts charges. This warranty lasts as long as you own your Sharp
Product during the Warranty Period. Warranty coverage terminates if you
sell or otherwise transfer the Product.
How to obtain warranty service?
If you purchased the Product at a Best Buy or Future Shop retail store
location and your television Product has a screen size of less than 42
inches, please take your original receipt and the Product to any Best Buy or
Future Shop store. Make sure that you place the Product in its original
packaging or packaging that provides the same amount of protection as
the original packaging. If you purchased the Product from a Best Buy or
Future Shop online web site, mail your original receipt and the Product to
the address listed on the web site. Make sure that you put the Product in
its original packaging or packaging that provides the same amount of
protection as the original packaging.
To obtain in-home warranty service for a television with a screen 42 inches
or larger, in the United States call 1-888-BESTBUY, Canada call
1-866-BESTBUY for Future Shop call 1-800-663-2275. Call agents will
diagnose and correct the issue over the phone or will have an
Sharp-approved repair technician dispatched to your home.
Where is the warranty valid?
This warranty is valid only in the United States and Canada at Best Buy or
Future Shop branded retail stores or websites to the original purchaser of
the product in the county where the original purchase was made.
What does the warranty not cover?
This warranty does not cover:
• Customer instruction/education
• Installation
• Set up adjustments
• Cosmetic damage
• Damage due to acts of God, such as power surges
• Accident(s)
• Misuse, unintentional or intentional
• Abuse, unintentional or intentional
• Negligence
• Commercial purposes/use, including but not limited to use in a place
of business or in communal areas of a multiple dwelling condominium
or apartment complex, or otherwise used in a place of other than a
private home.
• Modification of any part of the Product, including the antenna
• Damage due to incorrect operation or maintenance
• Connection to an incorrect voltage or power supply
• Outages, static or other problems with over-the-air reception of the
television broadcast signals.
• Attempted repair by any person not authorized by Warrantor to
service the Product
• Products sold “as is” or “with all faults”
• Consumables, including but not limited to batteries (i.e. AA, AAA, C
etc.)
• Products where the factory applied serial number has been altered or
removed
• Loss or Theft of this product or any part of the product
• Failures or Damage caused by any contact including but not limited to
liquids, gels or pastes.
• Up to three (3) pixel failures (dots that are dark or incorrectly
illuminated) grouped in an area smaller than one tenth (1/10) of the
display size or up to five (5) pixel failures throughout the display. (Pixel
based displays may contain a limited number of pixels that may not
function normally.)
• Problems with delay in motion or action of video images while playing
first-person style video games.
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR
EXCLUSIVE REMEDY FOR BREACH OF WARRANTY. WARRANTOR SHALL NOT
BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR THE
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT,
INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR
PRODUCT, LOST BUSINESS OR LOST PROFITS. WARRANTOR MAKES NO
OTHER EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, ALL
EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING, BUT
NOT LIMITED TO, ANY IMPLIED WARRANTIES OF AND CONDITIONS OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE
LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE
WARRANTY PERIOD. SOME STATES, PROVINCES AND JURISDICTIONS DO
NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS,
SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THIS WARRANTY
GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER
RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.
Product information:
For the U.S., go to: www.sharpusa.com/manuals/hd.aspx
For Canada (English), go to:
www.sharp.ca/en-CA/CustomerSupport/Support/ProductDownloads.aspx
For Canada (French), go to:
www.sharp.ca/fr-CA/CustomerSupport/Support/ProductDownloads.aspx
Product support (855) 544-2030
This product is manufactured for Best Buy China Ltd, as trustee for Best Buy
China, and distributed and warranted by Best Buy Purchasing, LLC (7601
Penn Avenue South, Richfield, Minnesota, U.S.A. 55423-3645) under brand
license by SHARP Corporation.
©2014 Best Buy China LTD. All rights reserved.
SHARP is a registered trademark of Sharp Corporation; used under license
by SHARP Corporation . All other trademarks are property of their
respective owners.
7
Product information:
For the U.S., go to: www.sharpusa.com/manuals/hd.aspx
For Canada (English), go to:
www.sharp.ca/en-CA/CustomerSupport/Support/ProductDownloads.aspx
For Canada (French), go to:
www.sharp.ca/fr-CA/CustomerSupport/Support/ProductDownloads.aspx
Product support (855) 544-2030
This product is manufactured for Best Buy China Ltd, as trustee for Best Buy China, and distributed and warranted by Best Buy Purchasing, LLC
(7601 Penn Avenue South, Richfield, Minnesota, U.S.A. 55423-3645) under brand license by SHARP Corporation.
©2014 Best Buy China LTD. All rights reserved.
SHARP is a registered trademark of Sharp Corporation; used under license by SHARP Corporation .
All other trademarks are property of their respective owners.
V4 ENGLISH
14-1223