Samsung MAX-DC990 Instruction manual

3 DVD MINI
COMPONENT SYSTEM
WITH USB HOST
DVD/VCD/CD/MP3-CD/CD-R/RW
PLAYBACK
THIS APPLIANCE IS MANUFACTURED BY:
MAX-DC20800
Instruction Manual
MONO/ST
COMPACT
DIGITAL AUDIO
AH68-01780B
COMPACT
DIGITAL VIDEO
This symbol indicates that dangerous voltage which
can cause electric shock is present inside this unit.
This symbol alerts you to important operating and
maintenance instructions accompanying the unit.
NOT REMOVE REAR COVER. NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
CLASS 1 LASER PRODUCT
This Compact Disc player is classified
as a CLASS 1 LASER product.
WARNING: To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.
SETUP
QUALIFIED
SERVICE PERSONNEL.
Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your
player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure the ventilation slots
are not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which may become
hot. Before moving the player, ensure the disc tray is empty. This player is designed for continuous use. Switching off the DVD player to
the stand-by mode does not disconnect the electrical supply. In order to disconnect the player completely from the power supply,
remove the main plug from the wall outlet, especially when left unused for a long period of time.
OPERATION
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
CAUTION-INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCKS DEFEATED, AVOID
EXPOSURE TO BEAM.
CONNECTIONS
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
Use of controls, adjustments or performance of procedures other
than those specified herein may result in hazardous radiation
exposure.
PREPARATION
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUCT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
Precautions
PREPARATION
Safety Warnings
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
THIS APPLIANCE IS FITTED WITH 220V SASO APPROVED PLUG.THE CUSTOMER IS
ENTITLED TO A FREE SASO APPROVED 127V PLUG FROM THE LOCAL DEALER.
During thunderstorms, disconnect AC main plug from the
wall outlet.
Voltage peaks due to lightning could damage the unit.
Do not expose the unit to direct sunlight or other heat
sources.
This could lead to overheating and malfunction of the unit.
RADIO OPERATION
(Saudi Arabian Standards Organisation)
TAPE DECK
Phones
The battery used with this product contain chemicals that
are harmful to the environment.
Do not dispose of batteries in the general household trash.
2
MISCELLANEOUS
1
Protect the player from moisture(i.e. vases) , and excess
heat(e.g.fireplace) or equipment creating strong magnetic or electric
fields (i.e.speakers...). Disconnect the power cable from the AC supply if
the player malfunctions. Your player is not intended for industrial use.
Use of this product is for personal use only.
Condensation may occur if your player or disc have been stored in cold
temperatures.
If transporting the player during the winter, wait approximately 2 hours
until the unit has reached room temperature before using.
PREPARATION
Contents
Features
PREPARATION
Safety Warnings ............................................................................................................................................................................................1
Precautions....................................................................................................................................................................................................2
Features.........................................................................................................................................................................................................3
Description.....................................................................................................................................................................................................5
CONNECTIONS
Multi-Disc Playback & AM/FM Tuner, TAPE,USB HOST.
The MAX-DC990combines the convenience of multi-disc playback capability,
including DVD-VEDIO, DVD-AUDIO,CD, MP3-CD, CD-R, CDRW,VCD,DivX,JPEG and DVD-R/RW, with a sophisticated AM/FM tuner, TAPE,
USB HOST all in a single player.
TV Screen Saver Function
The MAX-DC990 automatically brightens and darkens the brightness of
the TV screen after 3 minutes in the stop mode.
The MAX-DC990 automatically switches itself into the power saving
mode after 20 minutes in the screen saver mode.
Power Saving Function
The MAX-DC990 automatically shuts itself off after 20 minutes in the stop mode.
Customized TV Screen Display
The MAX-DC990 allows you to select your favorite image during JPEG,
VCD/DVD playback and set it as your background wallpaper.
1
~ 6
OPERATION
Disc Playback ................................................................................................................................................................................................16
Bonus Group/Navigating pages ...................................................................................................................................................................18
DivX Playback................................................................................................................................................................................................19
Playing Media Files using the USB feature ...................................................................................................................................................21
Displaying Disc Information ...........................................................................................................................................................................23
Fast/Slow Playback .......................................................................................................................................................................................24
Skipping Scenes/Songs.................................................................................................................................................................................25
Angle Function...............................................................................................................................................................................................26
Repeat Playback............................................................................................................................................................................................27
A-B Repeat playback ....................................................................................................................................................................................29
Zoom Function...............................................................................................................................................................................................30
Selecting Audio/Subtitle Language................................................................................................................................................................31
Moving Directly to a Scene/Song...................................................................................................................................................................32
JPEG File Playback .......................................................................................................................................................................................33
Using Disc Menu............................................................................................................................................................................................35
Using the Title Menu......................................................................................................................................................................................36
SETUP
DVD players and the discs are coded by region. These regional codes must match in order
for the disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is given on the rear panel of the player.
Setting the Language.....................................................................................................................................................................................37
Language Code List.......................................................................................................................................................................................38
Setting TV Screen type..................................................................................................................................................................................39
Setting Parental Controls (Rating Level) .......................................................................................................................................................41
Setting the Password.....................................................................................................................................................................................42
Setting the Wallpaper ....................................................................................................................................................................................43
DVD Playback Mode .....................................................................................................................................................................................45
AV SYNC Setup ............................................................................................................................................................................................46
Setting the Speaker Mode ............................................................................................................................................................................47
Setting the Test Tone ...................................................................................................................................................................................48
Setting the Delay time ...................................................................................................................................................................................49
Setting the Audio Quality ..............................................................................................................................................................................51
Setting the DRC (Dynamic Range Compression) .........................................................................................................................................53
Dolby Pro Logic I I Mode ..............................................................................................................................................................................55
Dolby Pro Logic I I Effect ..............................................................................................................................................................................56
(Your DVD player will only play DVDs that are labeled with identical region codes.)
RADIO OPERATION
DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby Digital
VIDEO
Connecting the Speakers ..............................................................................................................................................................................9
Connecting to a TV ........................................................................................................................................................................................11
P.SCAN(Progressive Scan) Function ............................................................................................................................................................12
Connecting External Components .................................................................................................................................................................13
Connecting the FM,AM and SW(option) Antennas........................................................................................................................................14
Setting the Clock............................................................................................................................................................................................15
surround sound and MPEG-2 video compression technology. Now you can enjoy these
realistic effects in the home, as if you were in a movie theater or concert hall.
Listening to Radio ..........................................................................................................................................................................................57
Presetting Stations.........................................................................................................................................................................................58
Copy Protection
TAPE DECK
Listening to a Cassette ..................................................................................................................................................................................59
• Many DVD discs are encoded with copy protection. Because of this, you should only connect your
•
3
DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture
from copy-protected DVD discs.
This product incorporates copyright protection technology that is protected by methods claims of certain
U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
MISCELLANEOUS
Recording a Compact Disc ............................................................................................................................................................................62
Recording a Radio Program ..........................................................................................................................................................................64
Timer Function...............................................................................................................................................................................................65
Canceling the Timer/SUB WOOFER LEVEL Function ..................................................................................................................................66
P.SURROUND XT AND SOUND MODE Function .......................................................................................................................................67
Sleep Timer Function / Mute Function...........................................................................................................................................................68
DEMO Function / DIMMER Function/ECO Function ....................................................................................................................................69
Bass/Treble Level Function ...........................................................................................................................................................................70
Connecting Headphones/Microphone(option) ...............................................................................................................................................71
Cautions on Handling and Storing Discs .......................................................................................................................................................72
Before Calling for Service ..............................................................................................................................................................................73
Notes on Discs...............................................................................................................................................................................................75
Notes on Terminology....................................................................................................................................................................................76
Specifications.................................................................................................................................................................................................77
USB Feature Supported Player .....................................................................................................................................................................78
4
PREPARATION
Description
—Front Panel—
35
—Rear Panel—
34
33
32
1
2
3
4
31
1
2
3
4
5
6
30
5
29
6
7
28
27
26
25
24
23
8
9
10
11
12
1.
2.
3.
4.
5.
6.
7.
If the TV is equipped with an S-Video input
connector (S-VIDEO IN), connect it to the
player's S-Video output jack.
8. Video Output Connector
7
8
9
SW Antenna Connector (Option)
AM Antenna Connectors
FM Antenna Connector
AUX-In
LINE OUT
Sub woofer Control Jack
S-Video Output Connector
Connect the TV's video input jacks (VIDEO IN) to
the VIDEO OUT connector.
9. Component Video Output Connectors
Connect a TV with component vide input jacks to
these jacks.
22
10
21
11
10. 5.1 Channel Speaker Output
Terminals
11.Voltage Selector (Option)
20
13
Accessories
14 15 161718 19
5
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
Tuner Memory
Timer On/Off
Cassette Deck 2
TREBLE
BASS
Sound Mode
Sleep
USB
Enter
Timer/Clock
Multi Jog
Power Sourround XT
Volume
Compact Disc Compartment
Disc Change
Open/Close
Disc Selection buttons
OPEN
/CLOS
E
DISC
SLEEP
SKIP
DIMM
ER
ZOOM
REPEA
T
SLOW
REMA
IN
TUNE
BAND R
TAPE
SUB
TITLE
AUX
VOLU
ME
TUNIN
G
MENU
MUTE
ENTER
TEST
TIMER/
CLOCK
RETURN
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
Window Display
STANDBY/ON/ECO
Function Selection buttons
Demo/Dimmer
Echo
MIC Level
Search Function buttons
Tuning Mode or Stop button
MIC1,MIC2
Headphone Jack Connector
Record/Pause (PAL/NTSC)
Tape 1/2
Cassette Deck 1
Tape Reverse Mode
Tape Normal Speed Dubbing
Tape Counter Reset
CD Synchro Recording
AUX
FM Mono/Stereo
INFO
1.
2.
3.
4.
5.
6.
7.
TONE
SOUND
TIMER
EDIT
ON/OFF
AH59-013
EZ/VIEW
79B
NTSC/P
AL
CANCE
L
P.SCA
N
DIGES
T
LOGO
SLIDE
MODE
Remote Control
Video Cable
AM Antenna
Audio Cable
FM Antenna
User's Manual
6
PREPARATION
Description
—Remote Control—
Insert Remote Batteries
POWER STANDBY/ON button
TAPE PLAY button
OPEN/CLOSE button
REMAIN/TAPE 1/2 button
AUX/USB button
TUNER/BAND button
SLEEP button
DISC SKIP/DVD button
Number(0~9) buttons
CANCEL button
DIMMER/DEMO button
Play/Pause button
1
Remove the battery
cover on the back of
the remote by
pressing down and
sliding the cover in
the direction of the
arrow.
2
Insert two 1.5V AAA
batteries, paying
attention to the correct
polarities (+ and –).
3
Replace the battery
cover.
Stop button
Tuning Preset/CD Skip button
SOUND MODE button
VOLUME button
TUNER MEMORY,P.SCAN button
TUNING button
MENU button
INFO button
RETURN button
MUTE button
Caution
Follow these precautions to avoid leaking or cracking cells:
• Place batteries in the remote control so they match the polarity:(+) to (+)and (–)to (–).
• Use the correct type of batteries.Batteries that look similar may differ in voltage.
• Always replace both batteries at the same time.
• Do not expose batteries to heat or flame.
Direction/Enter button
PL II MODE buttons
PL II EFFECT button
DIGEST button
SOUND EDIT button
SUB TITLE button
REPEAT button
TIMER/CLOCK button
TIMER ON/OFF button
SLIDE MODE button
LOGO button
TEST TONE button
MONO/ST
SLOW,MONO/ST button
ZOOM button
Range of Operation of the Remote Control
The remote control can be used up to approximately 23
feet/7 meters in a straight line. It can also be operated at
a horizontal angle of up to 30° from the remote control
sensor.
EZ VIEW, NTSC/PAL button
7
8
Connecting the Speakers
Subwoofer
SW
L
R
C
Front Speaker (R)
SW
Center Speaker
Violet
C
Green
SR
SL
Front Speaker (L)
L
R
Gray
Blue
White
Red
SR
Position of the DVD Player
• Place it on a stand or cabinet shelf, or under
the TV stand.
The listening position should be located about 2.5 to 3
times the distance of the TV's screen size away from the
TV. Example: For 32" TVs 2~2.4m (6~8feet)
For 55" TVs 3.5~4m (11~13feet)
position, facing inwards (about 45°) toward you.
•
the same height as your ear.
Align the front face of the front speakers with the
front face of the center speaker or place them
slightly in front of the center speakers.
Rear Speaker (R)
Rear Speaker (L)
Back of the Main Unit
Connect the connecting jacks to
the back of the DVD player.
Front Speakers L R
• Place these speakers in front of your listening
• Place the speakers so that their tweeters will be at
SL
Selecting the Listening Position
Rear Speakers SL SR
• Place these speakers behind your listening position.
• If there isn't enough room, place these speakers to face each other.
• Place them about 60 to 90cm (2 to 3feet) above your ear, facing
• Make sure the colors of the speaker terminals
match the colors of the connecting jacks.
slightly downward.
the front and center speakers, the rear speakers are used
* Unlike
to handle mainly sound effects and sound will not come from
them all the time.
Center Speaker C
• It is best to install it at the same height as the front
speakers.
• You can also install it directly over or under the TV.
Subwoofer SW
• The position of the subwoofer is not so critical.
Place it anywhere you like.
• Usually, it is placed by a corner near the front speakers.
9
10
CONNECTIONS
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Connecting to a TV
P.SCAN (Progressive Scan) Function
Please be sure to turn off the power and unplug the power cord before moving or installing this unit.
Please choose one of three video connection methods.
Method 1
Unlike regular Interlace Scan, in which two fields of picture information alternate to create the
entire picture (odd scan lines, then even scan lines), Progressive Scan uses one field of
information (all lines displayed in one pass) to create a clear and detailed picture without
visible scan lines.
Using Video Out (Good Quality)
Connect Video Out on the player to Video In on your TV.
2
Press the TV/VIDEO button on the remote of TV control to
set the TV to "VIDEO".
Press and hold P.SCAN button on the remote controller for over 5 seconds in
STOP mode.
• Pressing and holding the button for over 5 seconds will select "Progressive Scan" and "Interlace
Supplied
Scan" repetitively.
What is Progressive (or Non-Interlaced) Scanning?
Method 2
Interlaced Scan (1 FRAME = 2 FIELDS)
Progressive Scan (FULL FRAME)
Using S-Video Out (Better Quality )
Use this method if your TV has an S-Video In jack.
1
Connect S-Video Out to S-Video In on your TV.
2
Press the TV/VIDEO button on the remote control of TV to set
the TV to "S-VIDEO".
Not Supplied
Method 3
In interlaced-scan video, a frame consists of two
interlaced fields (odd and even), where each field
contains every other horizontal line in the frame.
The odd field of alternating lines is displayed first, and
then the even field is displayed to fill in the alternating
gaps left by the odd field to form a single frame.
One frame, displayed every 1/30th of a second, contains
two interfaced fields, thus a total of 60 fields are
displayed every 1/60th of a second.
The interlaced scanning method is intended for capturing
a still object.
Component Video (Best Quality)
Use this method if your TV have Pr,Pb and Y jacks.
The progressive scanning method scans one full frame of
video consecutively down the screen, line by line.
An entire image is drawn at one time, as opposed to the
interlaced scanning process by which a video image is
drawn in a series of passes.
The progressive scanning method is desirable for dealing
with moving objects.
COMPONENT
IN
If you television is equipped with Component Video inputs,connect a
component video cable from the Pr,Pb and Y jacks on
the back panel of the system to the corresponding jacks on your television.
Note
Not Supplied
Note
• Composite Video: A single video signal that is a composite of
the black-and-white information (Y) and the color information (C).
• S-Video: A video transmission standard that provides a sharper,
brighter picture than ordinary composite video by separating
brightness and color signals.
11
• This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that support
•
Progressive Video. (It does not work on TVs with conventional component inputs, i.e., non-progressive
scan TVs.)
Depending on the brand and model of your TV, this function may not work.
Selecting the Video Format
Turn off the main unit and then press NTSC/PAL on the Remote Control or REC/PAUSE on the Main Unit.
• By default, the video format is set to "PAL".
• Each time the button is pressed, the video format switches between "NTSC" and "PAL".
• Each country has a different video format standard.
• For normal playback, the video format of the disc must be the same as the video format of your TV.
12
CONNECTIONS
1
Connecting the FM, AM(MW) and SW(option) Antennas
Connecting External Components
Connecting an External Analog Component
If AM reception is poor, connect an
outdoor AM antenna(not supplied).
Example: Analog signal components such as a VCR, Camcorder, and TV.
CONNECTIONS
AM Loop Antenna
(supplied)
FM Antenna (supplied)
Audio Cable
If the external analog component
has only one Audio Out, connect
either left or right.
Snap the tabs on the loop into the
slots of the base to assemble the
AM loop antenna.
Spread the SW aerial out and attach the
ends to a wall, in the position providing the
best reception.
If reception is poor (e.g. distance from
transmitter too great, walls blocking the
radio waves, etc.), install an outdoor aerial.
FM antenna connection
1. Connect the FM antenna supplied to the FM 75Ω
COAXIAL terminal as a temporary measure.
2. Slowly move the antenna wire around until you
find a location where reception is good, then
fasten it to a wall or other rigid surface.
• If reception is poor, connect an outdoor antenna.
Before attaching a 75Ω coaxial cable (with a standard
type connector), disconnect the supplied FM antenna.
1
Connect Audio In on the DVD player to Audio Out on the external analog component.
2
Press AUX to select AUX.
• Be sure to match connector colors.
Cooling Fan
AM (MW) antenna connection
1. Connect the AM loop antenna supplied
to the AM and
terminals.
2. If reception is poor, connect an outdoor
single vinyl-covered wire to the AM
terminal. (Keep the AM loop antenna
connected).
The cooling fan dissipates the heat generated inside the unit so that the unit can be operated
normally. The cooling fan is activated automatically to supply cool air to the unit.
Please observe the following cautions for your safety.
• ‘AUX’ appears in the display.
• Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit
could rise and may damage it.
• Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are
covered with a newspaper or cloth, heat may build up inside the unit and fire may result.)
13
14
Setting the Clock
Disc Playback
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
1
Switch the system
on by pressing
POWER button.
2
Press TIMER/CLOCK
twice.
• CLOCK is displayed.
3
Selecting a CD in the Disc changer
Press ENTER.
The hour flashes.
The CD function is automatically selected when Disc Skip is pushed.
To select a specific disc, press the corresponding DISC (1, 2, 3) button on the front panel or
DISC SKIP on the remote control, until the required disc indicator flashes.
Result: All the discs will be played in turn, starting with the one selected.
• Increase the hours :
• Decrease the hours :
• If you use the DISC (1, 2, 3) function when listening to the radio or to a tape, the
4
Note
When the correct
hour is displayed,
press ENTER.
The minutes flash.
5
• Increase the minutes :
• Decrease the minutes :
When the correct
time is displayed,
press ENTER.
• You can display the time, even
when you are using another
function, by pressing
TIMER/CLOCK once.
DVD
DVDAUDIO
VCD
CD
OPERATION
system switches automatically to the CD mode.
• If the disc selected is not loaded, the next disc is played automatically.
• Playback starts automatically.
• "TIMER" appears in the display.
• The current time is now set.
MP3
JPEG
DivX
• Playback starts automatically.
• If the TV is on, a list of MP3s on
Note
•You
can also use Multi-Jog or
instead of
,
buttons in step 3,4.
the CD will appear on the TV
screen.
button on the panel front
Note
Checking the Remaining Time
• Depending on the content of the disc, the initial screen may appear different.
• Depending on the recording mode, some MP3-CDs cannot be played.
• Table of contents of a MP3-CD varies depending on the MP3 track format recorded
on the disc.
Press the REMAIN button.
• For checking the total and remaining time of a title or chapter being played.
To stop playback,
press STOP during playback.
Each time the REMAIN button is pressed
TITLE ELAPSED
• If pressed once, “PRESS PLAY” is displayed and the
TRACK ELAPSED
GROUP ELAPSED
DVD
TITLE REMAIN
CHAPTER ELAPSED
CHAPTER REMAIN
VCD
CD
DVDAUDIO
TRACK REMAIN
TOTAL ELAPSED
MP3
GROUP REMAIN
TRACK ELAPSED
TOTAL REMAIN
TRACK ELAPSED
TRACK REMAIN
To temporarily pause playback,
press PLAY/PAUSE during playback.
• To resume playback, press PLAY/PAUSE
button again.
•
stop position will be stored in memory. If PLAY/PAUSE
(
) button or ENTER button is pressed, playback
resumes from the stop position. (This function works
only with DVDs.)
If pressed twice, “STOP” is displayed, and if
PLAY/PAUSE (
) button is pressed, playback
starts from the beginning.
TRACK REMAIN
15
16
Bonus Group / Navigating Pages
Disc terminology
Groups and tracks (DVD-AUDIO)
• DVD-audios are divided into several large sections called "groups" and smaller
sections called "tracks". Numbers are allotted to these sections.
These numbers are called "group numbers" and "track numbers".
Bonus Group
DVDAUDIO
Some DVD-Audio discs have an extra ‘bonus’ group that requires a 4-digit key
number to access. See the disc packaging for details and the-key number.
When you play a DVD-Audio disc that has a
bonus group, the key number input screen
appears automatically.
Titles and chapters (DVD-VIDEO)
• DVD-videos are divided into several large sections called "titles" and smaller
sections called "chapters". Numbers are allotted to these sections.
These numbers are called "title numbers" and "chapter numbers".
Tracks (Video and music CDs)
Note
• Video and music CDs are divided into sections called "tracks".
Numbers are allotted to these sections. These numbers are called "track numbers".
• If you eject the disc, switch the power off, or unplug the player, you will need to re-enter
the key number.
Navigating Pages
Note
• In this manual, the instructions marked with "DVD (
OPERATION
KEY NUMBER :
DVD )" are applicable to
DVD-VIDEO, DVD-AUDIO, and DVD-R/RW discs.
Where a particular DVD type is mentioned, it is indicated separately.
• Depending on the content of the disc, the initial screen may appear different.
During playback, press the
remote control.
DVDAUDIO
button on the
• You can select the desired image from a DVD-Audio disc containing still images.
• With some discs, you may not be able to select images depending on how the
disc was manufactured.
17
18
DivX Playback
5 Minute Skip function
During playback, press the
,
button.
• Go to the screen about 5 minutes after whenever you press
• Go to the screen about 5 minutes earlier whenever you press
Skip Forward/Back
During playback, press the
button.
button.
button.
• Go to the next file whenever you press
button, if there are over
2 files in the disk.
• Go to the previous file whenever you press
Subtitle Display
button, if there are over
2 files in the disk.
Press the SUBTITLE button.
Press and hold
button.
• Each time the button is held down during playback,
the playback speed changes as follows:
DivX Feature Table
DivX Supported
Avi files are used to contain the audio and video data; these must be stored on CD in the ISO 9660 format.
SPEC
VIDEO Compatibility
AUDIO Compatibility
Zoom Function
1
Press ZOOM
button.
DivX3.11
Up to the latest VERSION
WMV
WMV V1/V2/V3/V7
MP3
CBR : 80kbps~384kbps
AC3
CBR : 128kbps~384kbps
WMA
CBR : 56kbps~128kbps
MPEGs containing DivX can be divided into Video and Audio.
• Video compatibility : All versions of DivX later than 3.11 (including
the latest 5.1) are supported. In addition, XviD is supported.
For WMV, V1, V2, V3, and V7 formats are possible.
The initial resolution is 720X480 and may support up to 720X576 .
• Audio compatibility : MP3s encoded at bitrates from 80kbps to
384kbps, AC3s from 128kbps to 384kbps, and WMAs from 56kbps
to 128kbps are supported.
• In addition, for subtitles, this unit will support Text format (SMI).
2
Press Cursor , ,
, buttons to
move to the area
you want to enlarge.
• Each time you press the button,
your selection will toggle between
“ZOOM X2” and “ZOOM OFF”.
Note
• When playing the DivX disk, you can play the file with extension of AVI only.
• Among the available DivX audio formats, DTS Audio is not supported.
• WMV V8 is not supported for WMV files.
• When burning a subtitle file to a CD-ROM with your PC, be sure to burn it as an SMI file.
• Divx Disc does not playing when its sampling frequency is lower than 32KHz.
• Some of the discs recorded in DivX or XviD depending on the way of recording could be
played back not correctly or couldn’t be played back at all.
• MP3 file support: MPEG1 LAYER3 (BITRATE : 128KBPS~320KBPS , SAMPLING FREQ.:
32K/44.1K/48KHz) .
Note
19
• DivX files can be played in
Zoom X2 mode only.
20
OPERATION
• Each time you press the button, your selection will toggle between “SUBTITLE ON” and “SUBTITLE OFF”.
• If the disc has only one subtitle file, it will be played automatically.
• Up to 8 subtitle languages are supported.
Fast playback
Skip Forward/Back
Playing Media Files using the USB feature
During playback, press the
You can connect and play files from external USB storage devices such as MP3 players, USB flash memory,
etc. using the player's USB function.
1
connect the USB
cable.
2
button.
• When there is more than a file, when you press the
• When there is more than a file, when you press the
Press the USB button
on the main unit or the
AUX button on the
remote control to
select the USB mode.
button, the next file is selected.
button, the previous file is selected.
Fast playback
To playback the disc at a faster speed, press and hold
during playback.
or
• Each time you press and hold either button, the playback speed will change as follows:
2x ➞ 4x ➞ 8x ➞ 32x ➞ Normal.
• “USB” appears on the display screen and
•
then disappear.
USB SORTING screen appears on the
TV screen and the saved file is played.
Compatible Devices
1. USB devices that support USB Mass Storage v1.0.
(USB devices that operate as a removable disk in Windows
(2000 or later) without additional driver installation.)
2. MP3 Player: HDD and flash type MP3 player.
3. Digital camera: PTP protocol is not supported.
To stop playback, press the STOP ( ) button.
• Devices which require additional program installation when you have connected it to a computer, are not
supported.
• Video files (DivX, WMV, MPEG, etc.) are supported.
• To prevent the loss of data saved in the USB device, please turn the unit off or
4. USB HDD and USB Flash Drive: Devices that support USB2.0 or USB1.1.
• You may experience a difference in playback quality when you connect a USB1.1 device.
• For a USB HDD, make sure to connect an auxiliary power cord to the USB HDD for proper operation.
switch it to another mode before disconnecting the USB cable.
5. USB card Reader: One slot USB card reader and Multi slot USB card reader
• Depending on the manufacturer. the USB card reader may not be supported.
• If you install multiple memory devices into a multi card reader, you may experience problems.
To play a file in the USB menu screen,
●
Supported Formats
• Music File Icon
• Image File Icon
• All File Icon
• Movie File Icon
Press the
button when it is in stop status and
select a desired icon from the top part of the menu.
• To play music files only, select the
• To view image files only, select the
Icon.
• To select all files select the
• To view movie files only, select the
21
Icon.
Icon.
Icon.
File name
Still Picture
Music
Movie
JPG
MP3
WMA
VCD
WMV
File
extension
Bit rate
.JPG .JPEG
–
.MP3
80~384kbps
.WMA
56~128kbps
MPG.MPEG .DAT
.WMV
Version
Pixel
Sampling
Frequency
–
–
V8
640*480
–
–
–
44.1kHz
44.1kHz
1.5Mbps
VCD1.1,VCD2.0
320*480
44.1KHz
4Mbps
V1,V2,V3,V7
720*480
44.1KHz~48KHz
720*480
44.1KHz~48KHz
(V9 is not supported)
DivX
.AVI,.ASF
4Mbps
DivX3.11~DivX5.1,Xvid
• A device using NTFS file system is not supported.(Only FAT file system is supported.)
The USB host function of this product does not support all USB devices.
For the information on the supported devices,pls see the P78
22
OPERATION
Note
Displaying Disc Information
Fast/Slow Playback
You can view playback information on the disc on the TV screen.
Fast Playback
Press and hold
Press INFO button on the remote control .
VCD
CD
VCD
CD
MP3
.
• Each time the button is held down during playback,
• Each time the button is pressed, the display changes as follows:
DVD
DVD
the playback speed changes as follows:
MP3
JPEG
DivX
OPERATION
Display disappears
Display disappears
Slow Playback
Press SLOW button.
Display disappears
• Each time the button is pressed during playback,
the playback speed changes as follows:
• What is a Title?
A movie contained in a DVD disc.
Note
DVD
• What is a Chapter?
information display may appear different.
• Depending on the disc, you can also
VCD
DivX
Each title on a DVD disc is divided into several smaller sections called "chapters".
• Depending on the disc, the disc
•
select DOLBY DIGITAL, or PRO LOGIC.
appears on the TV screen!
If this symbol appears on the TV screen while buttons are being operated, that
operation is not possible with the disc currently being played.
• What is a Track (File)?
A section of video or a music file recorded on a VCD, CD, or MP3-CD.
Screen Display
DVD display
MP3 CD display
VCD display
TRACK (FILE) display
CD display
23
DOLBY DIGITAL display
SUBTITLE display
ANGLE display
REPEAT PLAYBACK display
CHAPTER display
GROUP display
Note
• Reverse slow playback does not work with VCDs and DivX.
TRACK (FILE) display
TITLE display
DVD DVD-AUDIO display
AUDIO
AUDIO LANGUAGE display
STEREO (L/R) display
DivX display
• During fast playback of a CD or MP3-CD, sound is heard only at
2x speed, and not at 4x, 8x, and 32x speeds.
• No sound is heard during slow playback and step motion
playback.
24
Skipping Scenes/Songs
Angle Function
This function allows you to view the same scene in different angles.
DVD
VCD
DVD
MP3
Briefly press
.
• Each time the button is pressed briefly during playback, the previous or next chapter,
•
track, or directory (file) will be played.
But, you cannot skip chapters consecutively.
VCD
1
3
Press Cursor , buttons or numeric buttons
to select the desired angle.
MP3
OPERATION
DVD
2
Press Cursor
button to move to
ANGLE display.
Press INFO button.
TITLE 01/05 CHAPTER 002/040
• Each time the button is pressed, the angle changes as follows:
TITLE 01/05 CHAPTER 004/040
• When watching a VCD with a track
longer than 15 minutes, each time
is pressed, playback
will skip back or forward 5 minutes.
Note
25
• The Angle function works only with discs on which multiple angles
have been recorded.
26
Repeat Playback
Repeat playback allows you to repeatedly play a chapter, title, track (song), or directory (MP3 file).
DVD
DVD
VCD
CD
MP3
CD
To Select a Repeat Playback Mode
in the Disc Information Screen
JPEG
Press REPEAT button.
• Each time the button is pressed during playback, the repeat playback mode changes as follows:
DVD
VCD
MP3
JPEG
Repeat Playback Options
2
Press Cursor button
to move to REPEAT
PLAYBACK display.
•For a VCD or CD,Press INFO
button once.
TITLE
Repeatedly plays the selected title.
RANDOM
Plays tracks in random order.
(A track that has already been played
may be played again.)
3
TRACK
Repeatedly plays the selected track.
VCD
CD
DIR
Repeatedly plays all tracks in the
selected folder.
Press Cursor
button to select the
desired Repeat
Playback mode.
4
Press ENTER
button.
DVD
DISC
Repeatedly plays the entire disc.
OFF
Cancels Repeat Playback.
VCD
CD
Note
• Repeat playback operation is not possible with version 2.0 VCD discs if PBC is turned on.
Note
To use Repeat Playback on a VCD with PBC, you should set the PBC to OFF in the disc menu. (See page 35.)
• For MP3 and JPEG discs, you cannot select Repeat Play
from the information display screen.
• For VCD Version 2.0 discs, you can select Repeat Play in
PBC off mode.
27
28
OPERATION
CHAPTER
Repeatedly plays the selected chapter.
1
Press INFO button
twice .
A↔B Repeat Playback
Zoom Function
This function allows you to enlarge a particular area of the displayed image.
DVD
1
VCD
CD
Press INFO button
twice.
Zoom (Screen Enlarge) Function
2
Press Cursor
button to move to
REPEAT PLAYBACK
( ) display.
1
Press ZOOM
button.
2
Press Cursor , ,
, buttons to
move to the area
you want to enlarge.
• For a VCD or CD, press INFO
DVD
3
VCD
Press ENTER
button.
• Each time the button is pressed, the
button once.
zoom level changes as follows:
3
Press Cursor , buttons
to select ‘A-’ and then press
ENTER button at the beginning
of the desired segment.
• When ENTER button is pressed,
the selected position will be stored in
memory.
4
OPERATION
SELECT ZOOM POSITION
Press ENTER
button at the end of
the desired
segment.
• The specified segment will be played
repeatedly.
Aspect Ratio
DVD
Press EZ VIEW button.
• Each time the button is pressed, the zoom function will switch between On
and Off.
• When a movie is played in Wide screen format, black bars at the top and
bottom of the TV screen can be removed by pressing the EZ VIEW button.
To return to normal playback, press Cursor
to select
OFF.
, buttons
EZ VIEW
EZ VIEW OFF
Note
• The A-B Repeat function will not work on an MP3 or JPEG disc.
Note
• This function will not work if the DVD is recorded with multi-camera angle format.
• Black bars may not disappear because some DVD discs have a built-in horizontal to vertical ratio.
29
30
Selecting Audio Subtitle Language
Audio Language Selection Function
1
2
Press INFO button
twice.
DVD
Press Cursor ,
buttons or numeric
buttons to select the
desired audio language.
Moving Directly to a Scene/Song
DVD
1
VCD
CD
Moving to a Title/Track
Press INFO button.
2
Moving to a Chapter
Press Cursor , buttons
or numeric buttons to select
the desired title/track and then
press ENTER button.
3
Press Cursor ,
buttons to move to
Chapter display.
• Depending on the number of languages on a
01/05
001/040
0:00:37
1/1
Moving to a Chapter
Subtitle Language Selection Function
1
2
Press INFO button
twice.
DVD
4
Press Cursor
button to move to
SUBTITLE display.
01/05
MP3
3
Press Cursor
button or numeric
buttons to select
the desired subtitle.
Note
Press Cursor , buttons
or numeric buttons to select
the desired chapter and
then press ENTER button.
025/040
0:00:01
03/05
001/002
0:00:01
1/1
Moving to a Specific Time
5
1/1
01/05
025/040
1:17:30
6
•
1/1
Press the numeric
buttons to select the
desired time and then
press ENTER button.
01/05
1/1
028/040
1:30:00
1/1
JPEG
Press the numeric
buttons.
Note
• You can press
• You can use the SUBTITLE button on the
remote control to select a subtitle
language.
Depending on the disc, the Subtitle and
Audio Language functions may not work.
0:00:01
Moving to a Specific Time
Press Cursor ,
buttons to move to
time display.
01/05
001/040
• The selected file will be played.
• A MP3 or JPEG disc cannot be moved
•
on the remote
control to move directly to the desired
title, chapter, or track.
Depending on the disc, you may not
be able to move to the selected title or
time.
from the disc information screen.
• When playing a MP3 or JEPG disc, you
cannot use
,
to move a folder.
To move a folder, press (Stop) and
then press
, .
31
32
OPERATION
DVD disc, a different audio language (ENGLISH,
SPAIN,JAPANESE, etc.) is selected each time
the button is pressed.
JPEG File Playback
JPEG
Images captured with a digital camera or camcorder, or JPEG files on a PC can be
stored on a CD and then played back with this DVD player.
Slide Mode
Digest Function
You can view 9 JPEG images on the TV screen.
1
1
Place the JPEG disc on the disc tray.
Press DIGEST
button during
playback.
2
• JPEG files will be shown in
• The selected image is played for 5 seconds before moving to
9 windows.
Press the OPEN/CLOSE button.
• Playback starts automatically.
• Each image is shown for 5 seconds before another image is displayed.
3
the next image.
OPERATION
2
Press Cursor , , , buttons
to select the desired image and
then press ENTER button.
To view the previous or next image with 9 windows, press
.
Press SLIDE MODE button.
• Playback starts automatically.
• Each time the button is pressed, the image makes the transition as follows:
Rotate/Flip Function
From top to bottom
Press Cursor
,
,
,
buttons during playback.
From bottom to top
Rectangular shape in the center
button: Flip Vertically
Vertical curtain shape
Each time a new image is displayed, slide modes
(1~11) will be randomly and automatically be applied.
33
button: Rotate 90° Clockwise
Original Image
Cancels the slide mode.
Press
button: Rotate 90°
Counterclockwise
to skip to the next slide.
• Each time the button is pressed, the slide moves backward or forward.
button: Flip Horizontally
34
Using Disc Menu
Using the Title Menu
You can use the menus for the audio language, subtitle language, profile, etc.
DVD menu contents differ from disc to disc.
For DVDs containing multiple titles, you can view the title of each movie.
Depending on the disc, this function may either not work at all or may work differently.
DVD
1
In stop mode,Press
MENU button.
• When playing a VCD (version 2.0),
this toggles between PBC ON and
OFF.
2
Press Cursor , buttons
to move to ‘DISC MENU’
and then press ENTER
button.
1
In stop mode Press
MENU button.
2
Press Cursor ,
button to move to
‘Title Menu’.
• When you select the disc menu that is not
• The title menu appears.
supported by the disc, the "This menu is not
supported" message appears on the screen.
4
3
Press ENTER button.
OPERATION
3
Press Cursor , ,
, buttons to select
the desired item.
DVD
Press ENTER button.
Press MENU button to exit the setup screen.
Note
PBC (Playback Control) Function
When playing a VCD (version 2.0), you can select and view various scenes according to the menu screen.
PBC ON: This VCD disc is version 2.0. The disc is played back according to the menu screen. Some functions may be
disabled. When some functions are disabled, select "PBC OFF" to enable them.
PBC OFF: This VCD disc is version 1.1. The disc is played back in the same way as with a music CD.
35
36
Language Code List
Setting the Language
Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle”
and/or “Disc Menu” (See page 35).
OSD language is set to English by default.
1
In stop mode,Press
MENU button.
5
Press Cursor ,
button to select the
desired language and then
press ENTER button.
• Once the setup is complete, if the language was
set to English, OSD will be displayed in English.
Selecting the
OSD Language
Selecting the
Audio Language
(recorded on the disc)
3
Note
• To select other language, select OTHER
and enter the language code of your
country.
(See 38 page for language code of
countries)
AUDIO, SUB TITLE and DISC MENU
language can be selected.
Selecting the
Subtitle Language
(recorded on the disc)
Press MENU button to exit the setup screen.
37
Press ENTER
button.
Selecting the Disc Menu
Language (recorded on the disc)
Code
Language
Code
Language
Code
Language
Code
Language
1027
Afar
1181
Frisian
1334
Latvian, Lettish
1506
Slovenian
1028
Abkhazian
1183
Irish
1345
Malagasy
1507
Samoan
1032
Afrikaans
1186
Scots Gaelic
1347
Maori
1508
Shona
1039
Amharic
1194
Galician
1349
Macedonian
1509
Somali
1044
Arabic
1196
Guarani
1350
Malayalam
1511
Albanian
1045
Assamese
1203
Gujarati
1352
Mongolian
1512
Serbian
1051
Aymara
1209
Hausa
1353
Moldavian
1513
Siswati
1052
Azerbaijani
1217
Hindi
1356
Marathi
1514
Sesotho
1053
Bashkir
1226
Croatian
1357
Malay
1515
Sundanese
1057
Byelorussian
1229
Hungarian
1358
Maltese
1516
Swedish
1059
Bulgarian
1233
Armenian
1363
Burmese
1517
Swahili
1060
Bihari
1235
Interlingua
1365
Nauru
1521
Tamil
1069
Bislama
1239
Interlingue
1369
Nepali
1525
Tegulu
1066
Bengali; Bangla
1245
Inupiak
1376
Dutch
1527
Tajik
1067
Tibetan
1248
Indonesian
1379
Norwegian
1528
Thai
1070
Breton
1253
Icelandic
1393
Occitan
1529
Tigrinya
Turkmen
1079
Catalan
1254
Italian
1403
(Afan) Oromo
1531
1093
Corsican
1257
Hebrew
1408
Oriya
1532
Tagalog
1097
Czech
1261
Japanese
1417
Punjabi
1534
Setswana
1103
Welsh
1269
Yiddish
1428
Polish
1535
Tonga
1105
Danish
1283
Javanese
1435
Pashto, Pushto
1538
Turkish
1109
German
1287
Georgian
1436
Portuguese
1539
Tsonga
1130
Bhutani
1297
Kazakh
1463
Quechua
1540
Tatar
1142
Greek
1298
Greenlandic
1481
Rhaeto-Romance
1543
Twi
1144
English
1299
Cambodian
1482
Kirundi
1557
Ukrainian
1145
Esperanto
1300
Kannada
1483
Romanian
1564
Urdu
1149
Spanish
1301
Korean
1489
Russian
1572
Uzbek
1150
Estonian
1305
Kashmiri
1491
Kinyarwanda
1581
Vietnamese
1151
Basque
1307
Kurdish
1495
Sanskrit
1587
Volapuk
1157
Persian
1311
Kirghiz
1498
Sindhi
1613
Wolof
1165
Finnish
1313
Latin
1501
Sangro
1632
Xhosa
1166
Fiji
1326
Lingala
1502
Serbo-Croatian
1665
Yoruba
1171
Faeroese
1327
Laothian
1503
Singhalese
1684
Chinese
1174
French
1332
Lithuanian
1505
Slovak
1697
Zulu
language you selected is
* Ifnottherecorded
on the disc, menu
language will not change even
if you set it to your desired
language.
Press RETURN button to return to the previous level.
38
SETUP
4
Press Cursor ,
button to select the
desired item and then
press ENTER button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
Setting TV Screen type
1
In stop mode,Press
MENU button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
Adjusting the TV Aspect Ratio (Screen Size)
The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of wide screen and high
definition TVs is 16:9. This ratio is called the aspect ratio. When playing DVDs recorded in different
screen size, you should adjust the aspect ratio to fit your TV or monitor.
✱ For a standard TV, select either "4:3LB" or "4:3PS" option according to
personal preference. Select "16:9" if you have a wide screen TV.
WIDE
: Select this to view a 16:9 picture in the full-screen
mode on your wide screen TV.
• You can enjoy the wide screen aspect.
4:3LB
4
Press Cursor ,
button to select the
desired item and then
press ENTER button.
• Once the setup is complete, you will
(4:3 Letter box)
: Select this to play a 16:9 picture in the letter box
mode on a conventional TV.
• Black bars will appear at the top and bottom of the screen.
4:3PS
(4:3 Pan&Scan)
SETUP
3
Press Cursor
button to move to ‘TV
DISPLAY’ and then
press ENTER button.
: Select this to play a 16:9 picture in the pan & scan
mode on a conventional TV.
• You can see the central portion of the screen only (with the
sides of the 16:9 picture cut off).
be taken to the previous screen.
Note
• If a DVD is in the 4:3 ratio, you cannot view it in wide screen.
• Since DVD discs are recorded in various image formats, they will look different depending on
the software, the type of TV, and the TV aspect ratio setting.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
39
40
1
Setting the Password
Use this to restrict playback of adult or violent DVDs you do not want children to view.
You can set the password for the Parental (rating level) setting.
in stop mode,Press
MENU button.
Press Cursor , button
to select the desired rating
level and then press
ENTER button.
• If you have selected Level 6, you
•
cannot view DVDs with Level 7 or
higher.
The higher the level, the closer the
content is to violent or adult material.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
5
Enter the password
and then press
ENTER button.
3
Press Cursor
button to move to
‘PARENTAL’ and then
press ENTER button.
1
4
• The password is set to "7890" by default.
• Once the setup is complete, you will be
Press MENU button.
Press ENTER
button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
5
Enter the password
and then press
ENTER button.
3
Press Cursor button to
move to ‘PASSWORD’
and then press ENTER
button.
SETUP
4
Setting Parental Controls (Rating Level)
• Enter the old password, a new
password, and confirm new password.
taken to the previous screen.
• The setting is complete.
Note
• This function works only if a DVD disc
contains the rating level information.
Press RETURN button to return to the previous level.
Press RETURN button to return to the previous level.
Press CANCEL button to cancel the error numeric when you inputting password.
41
Press MENU button to exit the setup screen.
Press MENU button to exit the setup screen.
42
Setting the Wallpaper
JPEG
DVD
VCD
While watching a DVD,,VCD or JPEG CD, you can set the image you like as a wallpaper.
Setting the Wallpaper
1
During playback, press
PLAY/PAUSE button
when the image you
like comes up.
2
To Change the Wallpaper
Press LOGO
button.
1
Press MENU
button.
4
Press to select
the desired ‘USER’,
and then press
ENTER.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
5
Press MENU
button to exit the
setup screen.
3
Press Cursor
button to move to
‘LOGO’ and then
press ENTER button.
• “COPY LOGO DATA” will be
displayed on the TV screen.
COPY LOGO DATA
PAUSE
• The selected wallpaper will be displayed.
• You can repeat Steps 1 and 2 to set up to
3 wallpapers.
• The power will turn off and turn on
automatically and back on the display
mode.
SETUP
Note
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Select this to set the
Samsung Logo image as
your wallpaper.
43
Select this to set the desired
image as your wallpaper.
44
DVD Playback Mode
AV SYNC Setup
Some DVD-Audio discs contain DVD-Video as well as DVD-Audio.
To play back the DVD-Video portion of the DVD-Audio disc, set the unit to DVD-Video mode.
Video may look slower than the audio if it is connected with digital TV.
In this case, adjust the delay time of audio to optimal status to fit the video.
1
Press the MENU
button while the
disc tray is open.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
1
Press the MENU button.
• Setup menu appears.
3
Press Cursor
button to move to
‘DVD TYPE’ and then
press ENTER button.
4
2
Press Cursor , buttons
to move to ‘Audio’ and then
press ENTER button.
• 'Audio' menu appears.
Press Cursor ,
button to move to
‘DVD VIDEO’ and then
press ENTER button.
switch to DVD AUDIO Play mode.
3
Press Cursor ,
buttons
to move to ‘AV-SYNC’ and
then press ENTER button.
• AV-SYNC screen appears.
4
Press Cursor
, buttons
to select the Delay Time of
AV-SYNC and then press the
ENTER button.
• You can set the audio delay time between 0 ms
and 300 ms. Set it to the optimal status.
When Selecting DVD Play Mode:
• DVD VIDEO : set to play the DVD video
•
contents contained in DVD
audio disc.
DVD AUDIO : set to play the default DVD
audio.
Note
• DVD Play mode is set to DVD
Press RETURN button to return to the previous level.
Audio as factory default setting.
Press RETURN button to return to the previous level.
45
Press MENU button to exit the setup screen.
Press MENU button to exit the setup screen.
46
SETUP
• Set steps 1 ~ 4 again if you want to
1
Setting the Speaker Mode
Setting the Test Tone
Signal outputs and frequency responses from the speakers will automatically be adjusted
according to your speaker configuration and whether certain speakers are used or not.
Press the Test Tone to check the speaker connections and to adjust the speaker levels.
In Stop mode,
press MENU
button.
2
Press Cursor
button to move to
‘Audio’ and then
press ENTER button.
1
In Stop mode,
press MENU
button.
2
Press Cursor
button to move to
‘Audio’ and then
press ENTER button.
3
Press Cursor button
to move to ‘TEST
TONE’ and then press
ENTER button.
• The test tone will be sent to L ➝ C ➝
R ➝ SR ➝ SL ➝ SW in that order.
If the ENTER button is pressed again
at this time, the test tone will stop.
3
In the Speaker
Setup, press the
ENTER button again.
4
Press RETURN button to return to the previous level.
• For C, LS, and RS, each time the button
•
SETUP
Press Cursor , ,
, buttons to move
to the desired
speaker and then
press ENTER button.
is pressed, the mode switches
alternately as follows: SMALL ➝ NONE.
For L and R, the mode is set to SMALL.
Press MENU button to exit the setup screen.
Continues to
next page
SMALL : Select this when using the speakers.
NONE : Select this when no speakers are installed.
When manually testing using the TEST TONE button
Press TEST TONE button.
L: Front Speaker (L)
R: Front Speaker (R)
C: Center Speaker
LS: Rear Speaker (L)
SW: Subwoofer
RS: Rear Speaker (R)
Multi-Channel Pro Logic Mode
• Test tone will be produced as follows:
Note
• Depending on PRO LOGIC and STEREO, the speaker mode may vary.
47
•
When playing a DVD or CD, this will work
only in Stop mode.
Use this function to check that each speaker is
correctly connected and that there is no problem.
To end the test tone,
press TEST TONE button.
Start
48
Setting the Delay Time
If the speakers cannot be placed at equal distances from the listening position, you can adjust the
delay time of the audio signals from the center and rear speakers.
1
In Stop mode,
press MENU
button.
2
Press Cursor button
to move to ‘Audio’ and
then press ENTER
button.
3
Press Cursor button
to move to ‘DELAY
TIME’ and then press
ENTER button.
4
Press Cursor , ,
, buttons to move
to the desired
speaker and then
press ENTER button.
5
Press Cursor ,
to set the Delay
time.
• You can set the delay time for C
between 00 and 05mSEC and for
LS and RS between 00 and
15mSEC.
SETUP
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can enjoy the best sound if
the distance between you and each speaker is the same. Since the sounds
arrive at the listening position at different times depending on the
placement of speakers, you can adjust this difference by adding a delay
effect to the sound of the Center Speaker and Surround Speakers.
Note
(Dolby Pro Logic II), the delay time may be different for each mode.
• With
• With AC-3 and DTS, the delay time can be set between 00 and 15mSEC.
• Setting CENTER SPEAKER
If the distance of Dc is equal to or longer than the
distance of Df in the figure, set the mode as 0ms.
Otherwise, change the setting according to the table.
Distance between Df and Dc
0.00 m
0.34 m
0.68 m
1.02 m
1.36 m
1.70 m
49
Delay Time
0 ms
1 ms
2 ms
3 ms
4 ms
5 ms
• Setting REAR () SPEAKERS
If the distance of Df is equal to the distance of Ds
in the figure, set the mode as 0ms. Otherwise,
change the setting according to the table.
Distance between Df and Ds
0.00 m
1.02 m
2.04 m
3.06 m
4.08 m
5.10 m
Ideal CENTER
SPEAKER placement
Delay Time
0 ms
3 ms
6 ms
9 ms
12 ms
15 ms
Ideal
SPEAKER
placement
It is desirable to place all speakers within this circle.
Df: The distance from FRONT SPEAKER
Dc: The distance from CENTER SPEAKER
Ds: The distance from SPEAKER
50
Setting the Audio Quality
You can adjust the balance and level for each speaker.
Method 1
1
When adjusting the audio quality using the setup screen
In Stop mode,
press MENU
button.
2
Press Cursor
button to move to
‘Audio’ and then press
ENTER button.
When manually adjusting with the SOUND EDIT button
Method 2
Adjusting Front Speaker Balance
1
TITLE
Press SOUND
EDIT button and
then press Cursor
, .
CHAP PRGM RDS RT
ST
TUNED
Adjusting Rear Speaker Balance
Adjusting Center Speaker Level
Press SOUND
EDIT button and
then press Cursor
, .
Press SOUND
EDIT button and
then press Cursor
, .
2
TITLE
CHAP PRGM RDS RT
ST
kHz
MHz
4
Press Cursor , ,
, buttons to select
the desired item and then
press ENTER button.
Adjusting Rear Speaker Level
4
TITLE
Press SOUND
EDIT button and
then press Cursor
, .
CHAP PRGM RDS
ST
TUNED
Press MENU button to exit the setup screen.
CHAP PRGM RDS RT
ST
TUNED
kHz
MHz
Adjusting Subwoofer Speaker Level
5
TITLE
Press SOUND
EDIT button and
then press Cursor
, .
CHAP PRGM RDS RT
kHz
MHz
Press RETURN button to return to the previous level.
TITLE
kHz
MHz
SETUP
3
Press Cursor button
to move to ‘SOUND
EDIT’ and then press
ENTER button.
TUNED
3
ST
TUNED
kHz
Note
Adjusting Front/Rear Speaker Balance
• You can select between 00 and –06 and OFF.
• The volume decreases as you move closer to –6.
Adjusting Center/Rear/Subwoofer Speaker Level
51
• The volume level can be adjusted in steps from +6dB to –6dB.
• The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.
52
Setting the DRC (Dynamic Range Compression)
You can use this function to enjoy Dolby Digital sound when watching movies at
low volume at night.
1
In stop mode,Press MENU
button.
3
If “DRC” is selected,
press ENTER.
4
Press Cursor ,
adjust the ‘DRC’.
to
• The
Cursor
button is pressed, the greater the
effect, and the Cursor
button is pressed, the
smaller the effect.
SETUP
2
Press Cursor button to
move to ‘Audio’ and then
press ENTER button.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
53
54
Dolby Pro Logic II Mode
Dolby Pro Logic II Effect
This function works only in Dolby Pro Logic MUSIC mode.
You can select the desired Dolby Pro Logic II audio mode.
Press
1
PL II MODE button.
Press
PL II MODE
button to select ‘MUSIC’
mode.
2
Press
PL II EFFECT button
and then press Cursor ,
buttons to select the mode.
• You can select either 0 or 1.
TITLE PBC CHAP PRGM RDS RT
TITLE PBC CHAP PRGM RDS RT
TA
ST
TA
ST
CMX
TUNED
TUNED
kHz
MHz
MPEG
kHz
MHz
3
Press
PL II EFFECT button
and then press Cursor ,
buttons to select the mode.
TITLE PBC CHAP PRGM RDS RT
PL II
MODE
Note
TA
• You can select between 0 and 6.
ST
PL II
EFFECT
• When selecting Pro Logic II mode, connect your external device to the
AUDIO INPUT jacks (L and R) on the player. If you connect to only one of
the inputs (L or R), you cannot listen to 5.1 channel surround sound.
TUNED
DSP TITLE PBC CHAP PRGM RDS RT
Note
TA
CMX
kHz
MHz
MPEG
ST
TUNED
kHz
MHz
• When playing a DVD disc encoded with two or more channels, multi-channel mode will be
selected automatically and
(Dolby Pro Logic II) button does not work.
PRO LOGIC II
• MUSIC: When listening to music, you can experience sound effects as if you are listening to the actual performance.
• MOVIE: Adds realism to the movie soundtrack.
• PRO LOGIC: You will experience a realistic multi-channel effect, as if using five speakers, while using just the front left
and right speakers.
• MATRIX: You will hear 5.1 channel surround sound.
STEREO: Select this to listen to sounds from the front left and right speakers and the subwoofer only.
55
• PANORAMA: This mode extends the front stereo image to include the surround speakers for
an exciting "wraparound" effect with side wall imaging.
• CENTER WIDTH: Sound is output to the center speaker only. The front left and right speakers
produce phantom sound.
• DIMENSION: Incrementally adjusts the sound field (DSP) from the front or rear.
56
SETUP
• You can select between 0 and 7.
4
Press
PL II EFFECT button
and then press Cursor ,
buttons to select the mode.
Listening to Radio
Presetting Stations
You can store up to:
You can listen to the chosen band (FM, (SW1,2),MW broadcast stations) by using
either the automatic or manual tuning operation.
Remote Control Unit
1
or
Tune in to the
desired station.
Automatic Tuning 1
• The selection toggles back
1
Press
button to select
the preset station.
Press the
TUNER(BAND)
button and select
the FM band.
2
• Each time the button is pressed,
and forth between "FM
➝(SW1,2) ➝MW" each time
the TUNER(BAND) button is
pressed.
15 FM stations
15AM stations
Example: Presetting FM 89.1 in the memory
2
Press TUNER/
BAND button.
15 FM stations
5 MW stations
5 SW1 stations
5 SW2 stations
Automatic Tuning 2
Press and hold
button
to automatically search the band.
3
Press
to
select "89.10".
• Refer to Step 2 on page 41
the band switches between
"FM ➝ (SW1,2) ➝MW".
Press the TUNER
MEMORY button.
• “PROGRAM” flashes in the
to automatically or manually
tune in to a station.
display.
PROGRAM
kHz
Manual Tuning
Briefly press
button to
kHz
MHz
kHz
MHz
MHz
increase or decrease the frequency incrementally.
Main Unit
1
2
Select a broadcast
station.
Press the STOP ( ) button
to select PRESET and then
press
button or turn Multi Jog
Knob to select the preset station.
Automatic Tuning 1
Press the STOP ( ) button to
select "AUTO" and then press
button or turn Multi-Jog Knob to
automatically search the band.
4
Press
to
select preset
number.
• You can select between 1 and
5
6
Press the TUNER
MEMORY button.
To preset another
station, repeat
steps 2 to 5.
• Press the TUNER MEMORY button before
‘PROGRAM’ disappears from the display.
15.
• ‘PROGRAM’ disappears from the display
and the station is stored in memory.
Automatic Tuning 2
PROGRAM
STOP ( ) to select
Manual Tuning Press
MANUAL and then briefly
press
or turn Multi Jog Knob
to tune in to a lower or higher frequency.
(This applies only when listening to an FM station.)
57
• Each time the button is pressed, the sound switches between "STEREO" and "MONO".
• In a poor reception area, select MONO for a clear, interference-free broadcast.
Note
kHz
kHz
MHz
Press MONO/ST button to listen in Mono/Stereo.
RADIO OPERATION
Press the TUNER/BAND
button to select the
desired band (FM,
(SW1,2),MW).
MHz
• When listening AM/SW ,
(Dolby Pro Logic II)
button does not work.
To tune in to a preset station, press
remote control to select a channel.
on the
58
Listening to a Cassette
Selecting the Cassette Playback Mode
Always treat your cassettes with care; refer, if necessary, to the section entitled
“Precautions When Using Audio Cassettes” on page 70.
Your mini component system has three cassette playback modes which
enable you to listen to both sides of a cassette automatically. .
Press REVERSE MODE until the appropriate
symbol is displayed.
•
: One
•
: One
•
1
Switch the system
on by pressing
STANDBY ON.
2
Press TAPE on
the player to
select the Tape
function.
3
Press the PUSH
EJECT ( ) of the
cassette deck to open
the cassette door and
insert a cassette.
• Insert a cassette with the
recording/playback side facing
the cassette holder, and then
push the cassette door shut.
• Side A : Tape (
• Side B : Tape (
) button once.
) button twice
Press Tape 1/2 button to select the
cassette to be played.
59
5
Press the
,
button if necessary.
6
When you have
finished playback,
press STOP button.
side of the cassette.
The other side of the cassette and then stops.
: Both sides of the cassette indefinitely until you
press stop.
Tape Counter
When playing a cassette in one of the cassette
decks, a counter is displayed to enable you to
take note of the counter value at the start of
each track to start playback at the
beginning of the track to which you wish to
listen.
•
•
TAPE DECK
4
Press the
button. The cassette
starts playing.
side of the selected cassette and then stops.
Before starting to record a cassette for which you wish to take
note of the counter values at the beginning of each track, reset
the counter by pressing COUNTER RESET .
Each cassette deck has a separate counter.
• Rewind the cassette
•
/ DOWN
button.
Fast-forward the cassette UP /
button.
60
Recording a Compact Disc
Coping a Cassette(Dubbing)
You can record a compact disc on a cassette in two different ways:
You can copy a cassette from Tape 1 to Tape 2.
•Normal speed dubbing in selecting Tape function mode.
•You do not need to adjust the volume, as it has no effect on the recording.
•Take care not to insert the tape to be copied in Tape 2, as it will be erased when
you start recording.
Synchronised recording
This feature enables you to synchronize the start of the recording with the start of the disc or track of your choice
only on Audio CD.
1
Switch the system
on by pressing
STANDBY/ON.
2
Insert a blank
cassette in Tape 2.
3
Insert the tape to
be copied in Tape 1.
1
Switch the system
on by pressing
STANDBY/ON.
2
Insert a blank
cassette in Tape 2.
• Press the PUSH/EJECT button (
•
The appropriate indications are
displayed and the cassette in
Tape 1 is copied to the cassette
in Tape 2.
5
4
Press
STOP button.
• Use the CD selection (
,
)
buttons to select the desired song.
5
Note
Press CD SYNCHRO
button.
•
start the recording from the first
piece of music.
Press and hold CD SYNCHRO
button during the playback of CD to
start the recording from the first part
of the music being played.
)
to open the CD door.
Insert a CD and press the
OPEN/CLOSE button ( ) to close
the CD door.
6
To stop recording,
press button.
• When stopped, press the button to
•
•In Recoding,DPL II doesn’t work.
61
Press the DVD/CD
(
) button.
• Press the OPEN/CLOSE button (
Note
•You can use CD/SYNCHRO button
only in CD Playback Mode.
•In Recoding,DPL II doesn’t work.
62
TAPE DECK
4
Press DUBBING
button to copy a
cassette.
)
to open the cassette door, insert a
cassette, and then close the cassette
door.
Insert the cassette with the safety
tabs.
3
Load a compact
disc.
Recording a Radio Program
Direct recording
You can record a radio program of your choice.
You do not need to adjust the volume, as it has no effect on the recording.
The direct recording mode enables you to start recording with any track on the compact disc.
1
Switch the system
on by pressing
STANDBY/ON.
2
• Press the PUSH/EJECT button (
•
4
Press the DVD/CD
(
) button.
• Use the CD selection (
)
buttons to select the desired song.
3
Insert a blank
cassette in Tape 2.
)
to open the cassette door, insert a
cassette, and then close the cassette
door.
Insert the cassette with the safety
tabs.
5
Press
REC/ PAUSE
button.
• Recording will begin.
• To stop recording, press
Load a compact
disc.
• Press the OPEN/CLOSE button (
•
to open the CD door.
Insert a CD and press the
OPEN/CLOSE button ( ) to close
the CD door.
)
1
Switch the system
on by pressing
STANDBY/ON.
4
Select the radio
station that you wish
to record by pressing
/DOWN or UP/
button .
2
Insert a blank
cassette in Deck 2.
3
Select the
TUNER function
by pressing
TUNER/BAND.
5
Press(REC/PAUSE)
button.
6
To stop recording,
press button.
Note
• The cassette tape you want to record
button.
on must have the safety tabs intact.
• REC is displayed in red and
recording starts.
Note
• In Recoding,DPL II doesn’t work.
63
64
MISCELLANEOUS
• In Recoding,DPL II doesn’t work.
Canceling the Timer/SUB WOOFER LEVEL Function
Timer Function
After having set the timer, it will start automatically as shown by the TIMER indication on the display.
If you no longer wish to use the timer, you must cancel it.
• The timer enables you to switch the system on or off at specific times.
• If you no longer want the system to be switched on or off automatically, you must cancel the timer.
• Before setting the timer, check that the current time is correct.
• For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
To cancel the timer, press TIMER
ON/OFF once.
Example: You wish to wake up to music every morning.
1
Switch the system
on by pressing
STANDBY/ON.
2
Press
TIMER/CLOCK
until TIMER is
displayed.
3
Press the ENTER
button.
•
To resume the timer, press TIMER
ON/OFF again.
•
is no longer displayed.
is displayed again.
• ON TIME is displayed (instead
Note
of the equalizer symbols) for a
few seconds, followed by any
switch-on time already set; you
can set the timer switch-on time.
4
5
Set the timer
switch-on time.
a. Set the hour by pressing
or
button.
b. Press ENTER .
• The minutes flash.
c. Set the minutes by pressing
or
button.
d. Press ENTER.
• OFF TIME is displayed (instead
of the equalizer symbols) for a few
seconds, followed by any switchoff time already set; you can now
set the timer switch-off time.
7
Press or button
to select the source to
be played when the
system switches on.
Set the timer
switch-off time.
a. Set the hour by pressing
or
button.
b. Press ENTER.
• The minutes flash.
c. Set the minutes by pressing
or
button.
d. Press ENTER.
• VOL 10 is displayed, where 10
corresponds to the volume
already set.
8
Press ENTER to
confirm the timer.
•
•
SUB Woofer Level Function
You can control the sub woofer level with the SUB WOOFER OUT
SYSTEM CONTROL Jack.
• The source to be selected is
displayed.
1
9
•
Press the POWER
button to switch on
the subwoofer .
2
Turn the VOLUME
knob to adjust the sub
woofer volume.
Press
STANDBY/ON to
set the system to
standby mode.
MISCELLANEOUS
• TAPE (cassette) : Insert a cassette
tape.
• TUNER (radio) : a Press ENTER.
6
Press or button
to adjust the volume
level and press
ENTER.
• You can cancel the timer while the power is on or while the player is in standby.
is displayed to the top right of
the time, indicating that the timer
has been set.
The system will switch on and off
automatically at the required
times.
b Select a preset
station by pressing
•
or .
DVD/CD (compact disc) : Load on or
more compact
disc.
USB :Insert a USB.
Note • If the timer switch on and off times are identical, the word ERROR is displayed.
65
•You can also use Multi Jog or
remote control in step 4,5,6,7.
button on the front panel to instead
,
button on the
66
Sleep Timer Function / Mute Function
P.SURROUND XT AND SOUND MODE Function
Sleep Timer Function
You can set the time that the DVD player will shut itself off.
Press SLEEP button.
• Each time the button is pressed, the selection changes as follows:
90 MIN ➝ 60 MIN ➝ 45 MIN ➝ 30 MIN ➝ 15 MIN ➝ OFF.
kHz
MHz
Selecting SOUND MODE
P.SURROUND XT Function
Your compact system is equipped with the function
of Power Sound/Power Surround/Power Surround
XT.
The Power Surround replaces conventional stereo
sound with a wider and more true-to-life sound. It
creates the feeling of being right at the centre of
the music and being surrounded by total music
sound.
The function of Power Sound amplifies bass and
improves high key or bass twice as much for you to
appreciate powerful real sound.
Press P SURROUND XT button until
the required option is selected.
Result: Each time the P SURROUND XT button is
pressed, “P.SOUND,P.SURR ,SURR XT, OFF”
is selected.
Your mini-compact system is equipped with a
preset equalizer that allows you to choose the
most appropriate balance between treble and
bass frequencies, according to the type of
music you are listening to.
To confirm the sleep timer setting, press SLEEP button.
•The remaining time before the DVD player will shut itself off is displayed.
•Pressing the button again changes the sleep time from what you have set
earlier.
To cancel the sleep timer, press SLEEP button until
OFF appears on the display.
Turn SOUND MODE on the front panel or
Press SOUND MODE on the remote control
until the required option is selected.
To obtain a...
Select...
Normal balance (linear)
Balance suitable for pop music
Balance suitable for rock music
Balance suitable for classic music
PASS
POP
ROCK
CLASSIC
Balance suitable for hall
Balance suitable for live
Balance suitable for cinema
Balance suitable for USER EQ
HALL
LIVE
CINEMA
USER EQ
Mute Function
This is useful when answering a doorbell or telephone call.
Press MUTE button.
MISCELLANEOUS
• ‘MUTE ’ appears in the display.
• To turn off mute, press the button again.
kHz
MHz
67
68
DEMO Function / DIMMER Function/
ECO Function
DEMO Function
You can view the various functions available on
your system.
Press DEMO/DIMMER button.
• The various functions available are listed in turn on the
•
display.
All these functions are described in detail in this booklet.
For instructions on how to use them, refer to the
appropriate sections.
Bass/Treble Level (USER EQ) Function
BASS Level Function
DIMMER Function
BASS function stresses low tones providing thudding sound effects.
You can adjust the brightness of the display on the main
unit so it won't interfere with your movie viewing.
Press DEMO/DIMMER button.
1
Turn BASS knob on the front
panel to select from BASS -08
to BASS +08 , total 9 steps.
2
You can select the level of low
tones you desire.
• Each time the button is press, the brightness changes as
follows: DIMMER ON(Dim) ➞ DIMMER
OFF(Bright).
TREBLE Level Function
To cancel this function, press
DEMO/DIMMER again.
ECO Mode Function
1
Turn Treble knob on the front
panel to select from TRE -08
to TRE +08 , total 9 steps.
2
You can select the level of
high tones you desire.
MISCELLANEOUS
You can save the power consumption while the unit is turned
off(on standby).
Treble function stresses high tones providing thudding sound effects.
• To activate the ECO mode,Press STANDBY/ON/ECO while the unit is turned off (on
standby),The display illumination(including the display demonstration) disappears.
• While ECO mode is activated, the display demonstration is canceled temporarily.
69
70
Connecting Headphones/Microphone(option)
You can connect a set of headphones to your micro component system so that you
can listen to music or radio programmers without disturbing other people in the room.
The earphones must have a 3.5ø jack or an appropriate adapter.
Cautions on Handling and Storing Discs
Small scratches on the disc may reduce sound and picture quality or cause breaks in
playback. Be especially careful not to scratch discs when handling them.
Handling discs
Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints will not
get on the surface.
Do not stick paper or tape on the disc.
Handling and Storing Discs
When you get fingerprints or dirt on the disc, clean it
with a mild detergent diluted in water and wipe with a
soft cloth.
• When cleaning, wipe gently from the inside to the outside of the disc.
Note
• Condensation may form if warm air comes into contact with cold parts
inside the player. When condensation forms inside the player, the player
may not operate correctly. If this occurs, remove the disc and let the
player stand for 1 or 2 hours with the power on.
Connect the headphones to the PHONES jack on the front panel.
• The loudspeakers are no longer used to output the sound.
Note
• Prolonged use of headphones at a high volume may damage your hearing.
Precautions When Using Audio Cassettes
• Check that the tape in the cassette is sufficiently taut.
• To prevent erasing a cassette that you wish to keep, remove the safety tab on the upper edge of the
cassette. To record a cassette, where the tab has been broken, simply cover the opening with adhesive
tape.
When you have finished playing a cassette, always put it back in its case.
•
• Store your cassettes in a clean place, out of direct sunlight, where they will not be exposed to high
temperatures.
• Avoid using 120-minute cassettes as they place unnecessary strain on the tape mechanism.
Plug the microphone with a 6.3ø MIC jack into microphone terminal.
MISCELLANEOUS
• Connect the Microphone.
• Turn the MIC LEVEL knob to adjust the MIC level.
• Press the ECHO button to select ECHO1,ECHO2, and ECHO OFF.
• During using the microphone ,you can press the REC/PAUSE button to record your favorite.
71
72
Before Calling for Service
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not
listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact
the nearest authorized dealer or Samsung Electronics Service Center.
Symptom
Disc tray does not open.
Playback does not start.
Check/Remedy
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
Audio language and
subtitles do not work.
• Check the region number of the DVD.
Menu screen does not appear even
when the menu function is selected.
•
•
The remote control does
not work.
DVD discs purchased from abroad may not be playable.
CD-ROMs and DVD-ROMs cannot be played on this DVD
player.
Make sure that the rating level is correct.
• Is the remote control being operated within its operation range of
• No sound is heard during fast playback, slow playback, and step
motion playback.
• Are the speakers connected properly? Is the speaker setup
correctly customized?
• Is the disc severely damaged?
Picture does not appear, sound
is not produced, or the disc
tray opens 2 to 5 seconds later.
73
them. And depending on the disc, they may work differently.
• Are you using a disc that does not contain menus?
• You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX
The tape does not start
playing
• The TAPE function has not been selected.
• The cassette has not been inserted correctly.
• The cassette player has not been closed.
• The tape is either slack or broken.
The volume falls off
The cassette is not erased correctly
There is excessive wow and flutter
• The audio heads are dirty.
• The rollers or drive capstans are dirty.
• The tape is worn.
Can't receive radio
broadcast.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM
• The main unit is not working.
(Example: The power goes out or
strange noise is heard.)
• The DVD player is not
working normally.
• Is the TV power on?
• Are the video cables connected properly?
• Is the disc dirty or damaged?
• A poorly manufactured disc may not be playable.
• Audio language and subtitles will not work for DVDs not containing
The password for rating
level has been forgotten.
mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3
ratio only. Refer to the DVD disc jacket and then select the
appropriate function.
antenna in an area with good reception.
• Turn off the power and hold the P.SURROUND XT button on the
main unit for longer than 5 seconds.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
• While the player is in “NO DISC” mode, hold the main unit's TUNING
MODE/ button for longer than 5 seconds. “INITIAL” appears on the
display and all settings will return to the default values.
• Press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
74
MISCELLANEOUS
• Disc is rotating but no
picture is produced.
• Picture quality is poor and
picture is shaking.
•
Was the DVD player suddenly moved from a cold place to a warm
one? When condensation forms inside the player, remove the disc
and let the player stand for 1 or 2 hours with the power on. (You
can use the player again after condensation disappears.)
Check/Remedy
Aspect ratio cannot be
changed.
angle and distance?
• Are the batteries exhausted?
Playback does not start
• Are you using a deformed disc or a disc with scratches on
the surface?
immediately when the
•
Play/Pause button is pressed. Wipe the disc clean.
Sound is not produced.
Symptom
Notes on Discs
Disc Recording Format
Notes on Terminology
ANGLE
CD-R Discs
• Depending on the disc recording device (CD-Recorder or PC ) and the condition of the disc, some CD-R discs
may not be playable.
• Use a 650MB/74 minute CD-R. Avoid CD-R media, as they may not be playable.
• If possible, do not use CD-RW (Rewritable) media, as they may not be playable.
• Only the CD-Rs that are properly "closed" can be fully played. If the session is closed but the disc is left open,
you may not be able to fully play the disc.
CD-R MP3 Discs
• Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played.
• MP3 file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• If the name of a file is in Korean, the name will be displayed on the TV screen in Korean and * will be shown in the
•
•
•
•
•
•
•
display of the main unit.
Use discs recorded with a compression/decompression data rate greater than 128Kbps.
Only files with the ".mp3" and ".MP3" extensions can be played.
Only a consecutively written Multisession disc can be played. If there is a blank segment in the Multisession disc, the
disc can be played only up to the blank segment.
If the disc is not closed, it will take longer to begin playback and not all of the recorded files may be played.
For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded in both low bit rate and high bit rate (e.g.,
32Kbps ~ 320Kbps), the sound may skip during playback.
If more than 500 tracks are recorded on a single CD, a maximum of 500 tracks can be played.
If more than 300 folders are recorded on a single CD, a maximum of 300 folders can be played.
What is MP3?
MP3 is short for MPEG-1 Audio Layer 3 and MPEG is an acronym for Moving Pictures Experts
Group. MP3 is a file format with compression ratio of 1:12 (128 Kbps*) That is, you can use MP3
format to record about 12 times the usual amount of data on a regular CD.
CHAPTER
NUMBER
DVD
PCM
75
An acronym for Pulse Code Modulation - another name for digital audio.
REGION NUMBER
Both the DVD player and DVD discs are encoded with a region number.
If the region number on the DVD disc does not correspond to the region number
of the DVD player, the player cannot play the disc.
SUBTITLES
Translated appearing at the bottom of the screen. A DVD disc can contain up to
32 subtitle languages.
TITLE NUMBER
These numbers are recorded on DVD discs. When a disc contains two or more
movies, these movies are numbered as Title 1, Title 2, etc.
VIDEO CD
These numbers are assigned to the tracks which are recorded on video and
audio CDs. They enable specific tracks to be located quickly.
Contains recordings of pictures and sound whose quality is roughly comparable
to that of video tape.
This player also supports video CDs with playback control (version 2.0).
5.1 (or 6) Channel Digital Surround sound reproduced from DVDs and LDs
recorded as a digital signals (with
disc marking). With better sound quality,
dynamic range, and directionality than traditional Dolby surround technology, you
can enjoy dynamic, realistic sound.
76
MISCELLANEOUS
•
•
•
A high-density optical disc on which high-quality pictures and sound have been
recorded by means of digital signals. Incorporating a new video compression
technology (MPEG-2) and high-density recording technology, a DVD disc
comprises two 0.6 mm thick discs bonded together.
This is recorded on a video CD (version 2.0). Selected scenes or information can
be chosen from the menu displayed on the TV monitor.
CD-R JPEG Discs
disc can be played only up to the blank segment.
A maximum of 9,999 images can be stored on a single CD.
When playing a Kodak/Fuji Picture CD, only the JPEG files in the picture folder can be played.
Picture discs other than Kodak/Fuji Picture CDs may take longer to start playing or may not play at all.
These numbers are recorded on DVD discs. A Title is subdivided into many
sections, each of which is numbered, and specific parts of the video can be
searched quickly using these numbers.
PBC
(PLAYBACK
CONTROL)
TRACK NUMBER
• Only files with the ".jpeg" and ".JPEG" extensions can be played.
• If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
• JPEG file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• Only a consecutively written multisession disc can be played. If there is a blank segment in the multisession disc, the
Recorded onto some DVD discs are scenes which have been simultaneously shot
from a number of different angles (the same scene is shot from the front, from the
left , from the right , etc.).
With such discs, the Angle button can be used to change the angle of view for
specific scenes.
USB Feature Supported Player
Specifications
Digital Camera
G
E
N
E
R
A
L
F
M
A
M
T
U
N
E
R
T
U
N
E
R
Weight
Dimensions (W x H x D)
Operating Temperature Range
Operating Humidity Range
Usable Sensitivity
S/N Ratio
Distortion
Usable Sensitivity
S/N Ratio
Distortion
Composite Video
V
I
D
E
O
O
U
T
P
U
T
A
M
P
L
I
F
I
E
R
Luminance Signal : 1.0Vp-p(75Ω load)
S-Video
Color Signal : 0.286Vp-p(75Ω load)
Component Video
Front speaker output
Center speaker output
Rear speaker output
Subwoofer speaker output
Frequency range
S/N Ratio
Channel separation
Input sensitivity
Speaker system
S
P
E
A
K
E
R
Y:1.0Vp-p(75Ω load)
Pr:0.70Vp-p(75Ω load)
Pb:0.70Vp-p(75Ω load)
130W x 2(6Ω)
130W(6Ω)
130W x 2(6Ω)
150W(4Ω)
20Hz~20kHz
70dB
55dB
(AUX)400mV
5.1ch speaker system
Company
Type
Company
Type
PowerShot A70
Canon
Digital Camera
Lumix LC33
Panasonic
Digital Camera
A90
Canon
Digital Camera
LUMIX DMC-F1
Panasonic
Digital Camera
IXY40
Canon
Digital Camera
Optio-S40
Pentax
Digital Camera
Canon
Digital Camera
Optio-S50
Pentax
Digital Camera
A90
Canon
Digital Camera
Optio 33LF
Pentax
Digital Camera
A95
Canon
Digital Camera
Optio 33L
Pentax
Digital Camera
G6
Canon
Digital Camera
Optio X
Pentax
Digital Camera
S60
Canon
Digital Camera
S¥œ
Pentax
Digital Camera
Exilom Z-40
Casio
Digital Camera
Optio MX
Pentax
Digital Camera
QV-R51
Casio
Digital Camera
Digimax-420
Samsung
Digital Camera
Finepix-A340
Fuji
Digital Camera
Digimax-400
Samsung
Digital Camera
Finepix-F810
Fuji
Digital Camera
Kenox UX4
Samsung
Digital Camera
Finepix-F610
Fuji
Digital Camera
VPC-AZ1
Sanyo
Digital Camera
Finepix-f450
Fuji
Digital Camera
Not recognize in PC
Finepix S7000
Fuji
Digital Camera
DSC-F828
Sony
Digital Camera
Finepix A310
Fuji
Digital Camera
DSC-P73
Sony
Digital Camera
Easy Save CX-4300
Kodak
Digital Camera
DSC-T1
Sony
Digital Camera
KD-310Z
Konica
Digital Camera
DSC-F88
Sony
Digital Camera
Finecam SL300R
Kyocera
Digital Camera
DSC-M1
Sony
Digital Camera
Finecam SL400R
Kyocera
Digital Camera
DSC-W1
Sony
Digital Camera
Finecam S5R
Kyocera
Digital Camera
DSC-T3
Sony
Digital Camera
Finecam Xt
Kyocera
Digital Camera
Sora PDR-T30
Toshiba
Digital Camera
Dimage-Z1
Minolta
Digital Camera
Coolpix 5900
Nikon
Digital Camera
Dimage Z1
Minolta
Digital Camera
Coolpix S1
Nikon
Digital Camera
Dimage X21
Minolta
Digital Camera
Coolpix 7600
Nikon
Digital Camera
Coolpix4200
NIKON
Digital Camera
DMC-FX7
Panasonic
Digital Camera
Coolpix4300
NIKON
Digital Camera
DMC-LS1
Panasonic
Digital Camera
Coolpix 2200
Nikon
Digital Camera
DMC-LZ2
Panasonic
Digital Camera
Coolpix 3500
Nikon
Digital Camera
IXY-Digital600
Canon
Digital Camera
Coolpix 3700
Nikon
Digital Camera
S5i
Pentax
Digital Camera
Coolpix 4100
Nikon
Digital Camera
Dimage Xt
Coolpix 5200
Nikon
Digital Camera
AZ-1
DSC-W5
Rear speaker
stylus 410 digital
Olympus
Digital Camera
Impedance
6Ω x 2
6Ω
6ΩX2
300-digital
Olympus
Digital Camera
Frequency range
150Hz~20kHz 30Hz~150Hz
150Hz~20KHz
150Hz~20KHz
u300
Olympus
Digital Camera
86dB/W/M
86dB/W/M
X-350
Olympus
Digital Camera
130W
130W
C-760
Olympus
Digital Camera
C-5060
Olympus
Digital Camera
X1
Olympus
Digital Camera
Output sound pressure level 85dB/W/M
4Ω
85dB/W/M
Rated input
130W
Maximum input
260W
Dimensions (W x H x D)
270 x 370 x 330 mm 250x 370 x 402 mm
8.0 Kg
150W
300W
260W
260W
372 x 160 x 235 mm 250 x 370 x 402 mm
0.85 Kg
0.85 Kg
Product
IXY50
Front speaker Subwoofer speaker Center speaker
Weights
77
Product
13Kg
280 x 372 x 390mm
+5°C~+35°C
10%~75%
12dB
55dB
0.8%
60dB
35dB
2%
1.0Vp-p(75Ω load)
u-mini
Olympus
Digital Camera
Lumix-FZ20
Panasonic
Digital Camera
DMC-FX7GD
Panasonic
Digital Camera
Minolta
Digital Camera
Olympus
Digital Camera
Sony
Digital Camera
78
USB Feature Supported Player
Multi Card Reader
USB Flash Disk
Product
Company
Type
Cruzer Micro
SanDisk
USB2.0 USB Flash Drive 128M
Cruzer Mini
SanDisk
USB2.0 128M
Cruzer Mini
SanDisk
USB2.0 256M
SONY
USB2.0 64MB
SONY Micro Vault
FLEX DRIVE
serotech
USB2.0 32MB
AnyDrive
A.L tech
USB2.0 128MB
XTICK
Micro Mini
iFlash
LG
RiDATA
Memo
LG
USB2.0 128M
IOMEGA
USB2.0 128M
Imation
USB2.0 64M
XTICK(M)
USB2.0 64M
EZDrive
USB2.0 64M
Product
UNICORN
USB2.0 Card Reader
Company
Type
Unicorn
USB 2.0 7 IN 1 CARD READER UC-601R
Billionton(Taiwan) USB 2.0 Card Reader for SD/MMC/RS-MMC(3-in-1)
USB External HDD
MP3 Player
Product
Product
Company
Creative MuVo NX128M
Creative
128 MB MP3 Player
Iriver
20G HDD MP3 player
YEPP YH-920
SAMUSUNG
20G HDD MP3 PLAYER
YEPP YH-925
samusung
20G HDD MP3 player
apple
HDD MP3 player(40G)
Iriver H320
I-pod
I-pod mini
Type
Apple
HDD MP3 Player(20G)
YEPP (YP-T7)
SAMSUNG
MP3 PLAYER
YEPP(YP-MT6)
SAMSUNG
MP3 PLAYER
YEPP(YP-T6)
SAMSUNG
MP3 PLAYER
YEPP(YP-53)
SAMSUNG
MP3 PLAYER
YEPP(YP-ST5)
SAMSUNG
MP3 PLAYER
YEPP(YP-T5)
SAMSUNG
MP3 PLAYER
YEPP(YP-60)
SAMSUNG
MP3 PLAYER
YEPP(YP-780)
SAMSUNG
MP3 PLAYER
YEPP(YP-35)
SAMSUNG
MP3 PLAYER
samsung
MP3 Player
YEPP(YP-55)
iAUDIO U2
COWON(Korea)
MP3 Player
iAUDIO G3
COWON(Korea)
MP3 Player
iAudio M3
COWON(Korea)
HDD MP3 player
SI-M500L
SHARP(Japan)
256MB MP3Player
IRIVER(Korea)
MP3Player
YEPP YP-T5 VB
Samsung(Korea)
MP3Player
YEPP YP-53
Samsung(Korea)
256MB MP3Player
79
Type
serotech
POCKET HARD DISK DRIVE
MOMOBAY UX-2
DVICO
USB2.0
MISCELLANEOUS
H10
Company
CUTIE
80