Asus VN279H User guide

Add to my manuals
30 Pages

advertisement

Asus VN279H User guide | Manualzz

VN279 series

LCD Monitor

User Guide

First Edition

May 2013 ii

Copyright © 2013 ASUSTeK COMPUTER INC. All Rights Reserved.

No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modified or alered, unless such repair, modification of alteration is authorized in writing byASUS; or (2) the serial number of the product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS

OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS

DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,

INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,

LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),

EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM

ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR

INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,

AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO

RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN

THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation nd to the owners’ benefit, without intent to infringe.

Contents

Notices.......................................................................................................... iv

Safety.information........................................................................................ v

Care.&.Cleaning........................................................................................... vi

Takeback.Services...................................................................................... vii

Chapter.1:.....Product.introduction

1.1.

Welcome!....................................................................................... 1-1

1.2.

Package.contents.......................................................................... 1-1

1.3.

Monitor.introduction..................................................................... 1-2

1.3.1 Front view ....................................................................... 1-2

1.3.2 Back view ........................................................................ 1-3

1.3.3 QuickFit Function ............................................................ 1-4

Chapter.2:.....Setup

2.1.

Assembling.the.monitor.arm/base.............................................. 2-1

2.2.

Adjusting.the.monitor................................................................... 2-1

2.3.

Detaching.the.arm/base.(for.VESA.wall.mount)......................... 2-2

2.4.

Using.the.connector.cover........................................................... 2-3

2.5.

Connecting.the.cables.................................................................. 2-3

2.6.

Turning.on.the.monitor................................................................. 2-4

Chapter.3:.....General.instructions

3.1.

OSD.(On-Screen.Display).menu.................................................. 3-1

3.1.1 How to reconfigure .......................................................... 3-1

3.1.2 OSD function introduction ............................................... 3-1

3.2.

Specifications.summary.(VN279H).............................................. 3-5

3.2.

Specifications.summary.(VN279Q).............................................. 3-7

3.3.

Troubleshooting.(FAQ)................................................................. 3-9

3.4.

Supported.operating.modes...................................................... 3-10

iii

iv

Notices

Federal.Communications.Commission.Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference, and

• This device must accept any interference received including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

As an Energy Star ® Partner, our company has determined that this product meets the Energy Star ® guidelines for energy efficiency.

Canadian.Department.of.Communications.Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the

Canadian Department of Communications.

This class B digital apparatus complies with Canadian ICES-003.

This Class B digital apparatus meets all requirements of the Canadian Interference

- Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du Réglement sur le matériel brouiller du Canada.

Safety information

• Before setting up the monitor, carefully read all the documentation that came with the package.

• To prevent fire or shock hazard, never expose the monitor to rain or moisture.

• Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury.

• If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.

• Before using the product, make sure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.

• Slots and openings on the back or top of the cabinet are provided for ventilation. Do not block these slots. Never place this product near or over a radiator or heat source unless proper ventilation is provided.

• The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supply to your home, consult your dealer or local power company.

• Use the appropriate power plug which complies with your local power standard.

• Do not overload power strips and extention cords. Overloading can result in fire or electric shock.

• Avoid dust, humidity, and temperature extremes. Do not place the monitor in any area where it may become wet. Place the monitor on a stable surface.

• Unplug the unit during a lightning storm or if it will not be used for a long period of time. This will protect the monitor from damage due to power surges.

• Never push objects or spill liquid of any kind into the slots on the monitor cabinet.

• To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate configured receptacles marked between

100-240V AC.

• If you encounter technical problems with the monitor, contact a qualified service technician or your retailer.

This symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment, and mercury-containing button cell battery) should not be placed in municipal waste. Please check local regulations for disposal of electronic products.

AEEE yönetmeliğine uygundur

v

vi

Care & Cleaning

• Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor.

Do not lift the display by the stand or the cord.

• Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with mild cleaner.

• Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended for use with the monitor. Never spray cleaner directly on the screen, as it may drip inside the monitor and cause an electric shock.

The.following.symptoms.are.normal.with.the.monitor:

• The screen may flicker during the initial use due to the nature of the fluorescent light. Turn off the Power Switch and turn it on again to make sure that the flicker disappears.

• You may find slightly uneven brightness on the screen depending on the desktop pattern you use.

• When the same image is displayed for hours, an afterimage of the previous screen may remain after switching the image. The screen will recover slowly or you can turn off the Power Switch for hours.

• When the screen becomes black or flashes, or cannot work anymore, contact your dealer or service center to fix it. Do not repair the screen by yourself!

Conventions.used.in.this.guide

WARNING: Information to prevent injury to yourself when trying to complete a task.

CAUTION: Information to prevent damage to the components when trying to complete a task.

IMPORTANT: Information that you MUST follow to complete a task.

NOTE: Tips and additional information to aid in completing a task.

Where.to.find.more.information

Refer to the following sources for additional information and for product and software updates.

1.. ASUS.websites

The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com

2.. Optional.documentation

Your product package may include optional documentation that may have been added by your dealer. These documents are not part of the standard package.

Takeback Services

ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for our customers to be able to responsibly recycle our products, batteries and other components as well as the packaging materials.

Please go to http://csr.asus.com/english/Takeback.htm for detail recycling information in different region.

vii

viii

1.1 Welcome!

Thank you for purchasing the ASUS ® LCD monitor!

The latest widescreen LCD monitor from ASUS provides a broader, brighter and crystal-clear display, plus a host of features that enhance your viewing experience.

With these features, you can enjoy the convenience and delightful visual experience that the monitor brings to you!

1.2 Package contents

Check your package for the following items:

LCD monitor

Monitor Base

Quick start guide

Warranty card

Power cord

VGA cable

MHL cable (optional)

HDMI cable (optional)

HDMI-DVI cable (optional)

DisplayPort cable (optional)

Audio cable

If any of the above items is damaged or missing, contact your retailer immediately.

ASUS VN279 Series LCD Monitor 1-1

1.3 Monitor introduction

1.3.1.

Front.view

1-2

1 2 3 4 5 6 7

1.

2.

QuickFit Button:

• Activates the QuickFit function designed for alignment.

• The QuickFit function contains 7 pages of common grid patterns, paper sizes, and photo sizes.

Button:

• Use this hotkey to switch from six video preset modes (Scenery, Standard,

Theater, Game, Night View, and sRGB Mode) with SPLENDID™ Video

Intelligence Technology

• Exits the OSD menu or goes back to the previous menu when the OSD menu is active.

• Automatically adjusts the image to its optimized position, clock, and phase by pressing this Button for 2-4 seconds (for VGA mode only).

3. Button:

• Decreases values or moves your selection left/down.

• Volume hotkey.

4. MENU Button:

• Turns on the OSD menu.

• Enacts the selected OSD menu item.

Chapter 1: Product introduction

5.

6.

7.

• Toggles the Key Lock function between on and off with a long press for

5 seconds.

Button:

• Increases values or moves your selection right/up.

• Brightness hotkey.

Input Select Button:

• Selects an available input source.

Press Button (Input Select Button) to display VGA, HDMI/MHL-1

(VN279H), HDMI/MHL-2 (VN279H), DisplayPort (VN279Q) signals after you connect VGA, HDMI/MHL, or DisplayPort cable with the monitor .

Power Button/Power Indicator

• Turns the monitor ON/OFF.

• The color definition of the power indicator is as the below table.

Status

White

Amber

Off

Description

ON

Standby mode

OFF

1.3.2.

Back.view

VN279H

VN279Q

8 6 7

1.. AC-IN.port. This port connects the power cord.

2.. DisplayPort. This port is for connection for a DisplayPort compatible device.

3.. HDMI/MHL.port. This port is for connection with an HDMI/MHL compatible device.

ASUS VN279 Series LCD Monitor 1-3

1-4

4.. VGA.port. This 15-pin port is for PC VGA connection.

5.. Audio-in.port.. This port connects PC audio source by the bundled audio cable.

6.. Earphone.jack. This port is only available when an HDMI/DisplayPort cable is connected.

7.. Kensington.lock.slot.

8.. Control.Buttons

1.3.3.

QuickFit.Function

The QuickFit function contains three kinds of patterns: (1) Grid patterns (2) Paper size (3) Photo size. To activate the patterns, press the QuickFit hotkey. Press the

Button again until a desired pattern is selected.

1. Grid patterns

The grid patterns facilitate designers and users to organize content and layout on a page and achieve a consistent look and feel.

Alignment Grid

2. Paper size

QuickFit provides numerous commonly used standard paper sizes for users to view their documents in real size on the screen.

A4 Letter

Chapter 1: Product introduction

3. Photo size

The various real photo sizes displayed in the QuickFit function provides photographers and other users to accurately view and edit their photos in real size on the screen.

Photo 4x6, 3x5, 2x2 Photo 8x10, 5x7

When QuickFit is activated, press the control Buttons to make adjustments. The

QuickFit OSD displayed in the lower right corner of the screen will guide users to make selections.

The QuickFit OSD shown on the screen is not accessible by tapping on it.

ASUS VN279 Series LCD Monitor 1-5

1-6 Chapter 1: Product introduction

2.1 Assembling the monitor arm/base

To assemble the monitor base:

1. Have the front of the monitor face down on a table.

2. Attach the base into the arm, making sure the tab on the arm fits into the groove on the base.

3. Fix the base to the arm by fastening the bundled screw.

We recommend that you cover the table surface with soft cloth to prevent damage to the monitor.

2.2 Adjusting the monitor

• For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you.

• Hold the stand to prevent the monitor from falling when you change its angle.

• The recommended adjusting angle is +22 to -5˚ .

-5。 to +22。

It is normal that the monitor slightly shakes while you adjust the viewing angle.

ASUS VN279 Series LCD Monitor 2-1

2.3 Detaching the arm/base

(for VESA wall mount)

The detachable arm/base of this monitor is specially designed for VESA wall mount.

To detach the arm/base:

1. Have the front of the monitor face down on a table.

2. Remove the rubbers in the four screw holes. (Figure 1)

3. Remove the base (Figure 2).

4. Pry the rear hinge cover (Figure 3).

5. Use a screwdriver to remove the four screws on the hinge (Figure 4), then remove the hinge.

1

2

Figure 1 Figure 2

2-2

Figure 3 Figure 4

• We recommend that you cover the table surface with soft cloth to prevent damage to the monitor.

• Hold the stand while removing the screws.

• The VESA wall mount kit (100 x 100 mm) is purchased separately.

• Use only the UL Listed Wall Mount Bracket with minimum weight/load

22.7kg (Screw size: M4 x 10 mm)

Chapter 2: Setup

2.4 Using the connector cover

•. To.remove.the.connector.cover: a. Pull the connector cover downwards.

b. Lift the connector cover form its center.

1

2

1

•. To.assemble.the.connector.cover: a. Insert the 2 tabs on both sides of the cover into the monitor.

b. Push the connector cover up to its original position.

2.5 Connecting the cables

1. Connect the cables as the following instructions:

VN279H

VN279Q

DisplayPort

HDMI

VGA Earphone jack

Audio-in

•. To.connect.the.power.cord: connect one end of the power cord securely to the monitor’s AC input port, the other end to a power outlet.

ASUS VN279 Series LCD Monitor 2-3

•. To.connect.the.VGA/HDMI.(MHL)/DisplayPort.cable: a. Plug one end of the VGA/HDMI (MHL)/DisplayPort cable to the monitor’s VGA/HDMI (MHL)/DisplayPort jack.

b. Connect the other end of the VGA/HDMI (MHL)/DisplayPort cable to your computer or mobile device's VGA/HDMI (MHL)/DisplayPort jack.

c. Tighten the two screws to secure the VGA connector.

•. To.connect.the.audio.cable:.connect one end of the audio cable to the monitor’s Audio-in port, the other end to the computer’s audio-out port.

•. To.use.the.earphone: connect the end with plug type to the monitor’s earphone jack when an HDMI or DisplayPort signal is fed.

When these cables are connected, you can choose the desired signal from the Input Select item in the OSD menu.

2.6 Turning on the monitor

Press the power button . See page 1-2 for the location of the power button. The power indicator lights up in white to show that the monitor is ON.

2-4 Chapter 2: Setup

ASUS VN279 Series LCD Monitor 2-5

2-6 Chapter 2: Setup

3.1 OSD (On-Screen Display) menu

3.1.1 How to reconfigure

1. Press the MENU Button to activate the OSD menu.

2. Press and to navigate through the functions.

Highlight the desired function and press the MENU Button to activate it. If the function selected has a sub-menu, press and again to navigate through the sub-menu functions. Highlight the desired sub-menu function and press the MENU Button to activate it.

3. Press and to change the settings of the selected function.

4. To exit and save the OSD menu, press the Button repeatedly until the OSD menu disappears. To adjust other functions, repeat steps 1-3.

3.1.2 OSD function introduction

1. Splendid

This function contains six subfunctions you can select for your preference. Each mode has the

Reset selection allowing you to maintain your setting or return to the preset mode.

Scenery Mode: best choice for scenery photo display with SPLENDID™

Video Enhancement.

Standard Mode: best choice for document editing with SPLENDID™

Video Enhancement.

Theater Mode: best choice for movies with SPLENDID™ Video

Enhancement.

Game Mode: best choice for games playing with SPLENDID™ Video

Enhancement.

Night View Mode: best choice for dark-scene games or movies with

SPLENDID™ Video Enhancement.

sRGB Mode: best choice for viewing photos and graphics from PCs.

• In the Standard Mode, the ASCR, Saturation ,Sharpness functions and Skin Tone are not user-configurable.

• In the sRGB Mode, the Saturation, Color Temp., Skin Tone,

Sharpness, Brightness, Contrast and ASCR functions are not userconfigurable.

ASUS VN279 Series LCD Monitor 3-1

2.. Color.

You can adjust Brightness,

Contrast, Saturation, Color Temp., and Skin Tone from this menu.

•.

Brightness: the adjusting range is from 0 to 100.

is a hotkey to activate this function.

•.

Contrast: the adjusting range is from 0 to 100.

•.

Saturation: the adjusting range is from 0 to 100.

•.

Color.Temp.: contains four modes including Cool, Normal, Warm, and

User Mode.

•.

Skin.Tone: contains three color modes including Reddish, Natural, and

Yellowish.

In the User mode, colors of R (Red), G (Green), and B (Blue) are userconfigurable; the adjusting range is from 0-100.

3.. Image

You can adjust Sharpness, Trace

Free, Aspect Control, VividPixel,

ASCR, Position (VGA only) and

Focus (VGA only) from this menu.

•.

Sharpness: the adjusting range is from 0 to 100.

•.

Trace.Free: adjusts the response time of the monitor.

•.

Aspect.Control: adjusts the aspect ratio to full, 4:3, 1:1 or OverScan.

4:3 is only available when input source is in 4:3 format. OverScan is only available for the HDMI input source.

•.

VividPixel: enhances the outline of the displayed picture and generates high-quality images on screen.

•.

ASCR: turns on/off the ASCR (ASUS Smart Contrast Ratio) function.

•.

Position.(Only.available.for.VGA.input): adjusts the horizontal position

(H-Position) and the vertical position (V-Position) of the image. The adjusting range is from 0 to 100.

•.

Focus.(Only.available.for.VGA.input): reduces Horizonal-line noise and Vertical-line noise of the image by adjusting (Phase) and (Clock) separately. The adjusting range is from 0 to 100.

3-2 Chapter 3: General Instructions

• Phase adjusts the phase of the pixel clock signal. With a wrong phase adjustment, the screen shows horizontal disturbances.

• Clock (pixel frequency) controls the number of pixels scanned by one horizontal sweep. If the frequency is not correct, the screen shows vertical stripes and the image is not proportional.

(VN279Q)

4.. Input.Select.

In this function, you can select your desired input source.

(VN279H)

5.. GamePlus.

The GamePlus Function provides a toolkit and creates a better gaming environment for users when playing different types of games. In addition, Aimpoint function is specially designed for new gamers or beginners interested in First Person Shooter

(FPS) games.

Press function.

and to select between Aimpoint and Timer

Press MENU to confirm the function you choose, and and exit.

to go back, off,

ASUS VN279 Series LCD Monitor 3-3

GamePlus Main Menu GamePlus — Aimpoint

GamePlus — Timer GamePlus — Timer — Position

6. System Setup

Allows you to adjust the system.

Splendid Demo Mode: splits the screen into two for

Splendid modes comparison.

Volume: the adjusting range is from 0 to 100.

ECO Mode: reduces power consumption.

OSD Setup:

* Adjusts the horizontal position (H-Position)/the vertical position

(V-Position) of the OSD from 0 to 100.

* Adjusts the OSD timeout from 10 to 120 seconds.

* Enables or disables the DDC/CI function.

* Adjusts the OSD background from opaque to transparent.

Keylock: enables the key lock function. A long press for 5 seconds on the MENU Button to disable the key lock function.

Information: shows the monitor information.

Language: there are 21 languages for your selection, including English,

French, German, Italian, Spanish, Dutch, Portuguese, Russian, Czech,

Croatian, Polish, Romanian, Hungarian, Turkish, Simplified Chinese,

Traditional Chinese, Japanese, Korean, Thai, Indonesia, Persian.

All Reset: “Yes” allows you to restore the default settings.

3-4 Chapter 3: General Instructions

3.2 Specifications summary (VN279H)

Panel Type

Panel size

Max. Resolution

Pixel pitch

Brightness (Typical)

Contrast Ratio (Typical)

Power LED

Tilt

Kensington lock

Voltage rating

Power consumption

TFT LCD

27”W (16:9, 68.6 cm) wide screen

1920 x 1080

0.311 mm

300 cd/m

3000:1

2

Contrast Ratio (Max.)

Viewing angle(H/V) CR>10

Display colors

100,000,000:1 (with ASCR on)

178˚/178˚

16.7 M

Response time 5 ms (Gray to gray)

SPLENDID™ Video Enhancement Yes

SPLENDID™ selection 6 video preset modes (by hotkey)

Yes

4 color temperatures

Auto adjustment

Color temperature selection

Analog input

Digital input

Earphone jack

Colors

Speaker (Built-in)

D-sub

HDMI v1.4 (MHL)

Yes

Black

2 W x 2 Stereo, RMS

White (On)/Amber (Standby)

+22˚~ -5˚

Yes

AC: 100~240V

Power On: < 35 W (Typical)*, Standby: < 0.5 W

(Typical), Power Off: < 0.3 W (Switch off)

Temperature (Operating) 0˚C~40˚C

Temperature (Non-operating)

Dimensions (W x H x D)

-20˚C~+60˚C

Weight (Esti.)

Multi-languages

Accessories

619.2 mm x 440.4 mm x 209.8 mm (machine)

706 mm x 536 mm x 188 mm (package)

4.8 kg (Net); 7.5 kg (Gross)

21 languages (English, French, German,

Italian, Spanish, Dutch, Portuguese, Russian,

Czech, Croatian, Polish, Romanian, Hungarian,

Turkish, Simplified Chinese, Traditional Chinese,

Japanese, Korean, Thai, Indonesia, Persian)

VGA cable, MHL cable (optional), HDMI-DVI cable (optional), HDMI cable (optional) , Audio cable, Power cord, Quick start guide, Warranty card

ASUS VN279 Series LCD Monitor 3-5

Regulation approvals Energy Star ® , China Energy Level 1, UL/cUL,

CB, CE, ErP, FCC (Class B), CCC, BSMI, CU,

C-Tick, VCCI, UkrSEPRO, TCO6.0, TUV-GS,

ISO 9241-307, J-MOSS, RoHS, WEEE, PSE,

WHQL for Windows 7 and Windows 8

*Without audio and USB hub connection.

**Specifications are subject to change without notice.

3-6 Chapter 3: General Instructions

3.2 Specifications summary (VN279Q)

Panel Type

Panel size

Max. Resolution

Pixel pitch

Brightness (Typical)

Contrast Ratio (Typical)

Power LED

Tilt

Kensington lock

Voltage rating

Power consumption

TFT LCD

27”W (16:9, 68.6 cm) wide screen

1920 x 1080

0.311 mm

300 cd/m

3000:1

2

Contrast Ratio (Max.)

Viewing angle(H/V) CR>10

Display colors

100,000,000:1 (with ASCR on)

178˚/178˚

16.7 M

Response time 5 ms (Gray to gray)

SPLENDID™ Video Enhancement Yes

SPLENDID™ selection 6 video preset modes (by hotkey)

Yes

4 color temperatures

Auto adjustment

Color temperature selection

Analog input

Digital input

Earphone jack

Colors

Speaker (Built-in)

D-sub

HDMI v1.4 (MHL), DisplayPort v1.1a

Yes

Black

2 W x 2 Stereo, RMS

White (On)/Amber (Standby)

+22˚~ -5˚

Yes

AC: 100~240V

Power On: < 35 W (Typical)*, Standby: < 0.5 W

(Typical), Power Off: < 0.3 W (Switch off)

Temperature (Operating) 0˚C~40˚C

Temperature (Non-operating)

Dimensions (W x H x D)

-20˚C~+60˚C

Weight (Esti.)

Multi-languages

Accessories

619.2 mm x 440.4 mm x 209.8 mm (machine)

706 mm x 536 mm x 188 mm (package)

4.8 kg (Net); 7.5 kg (Gross)

21 languages (English, French, German,

Italian, Spanish, Dutch, Portuguese, Russian,

Czech, Croatian, Polish, Romanian, Hungarian,

Turkish, Simplified Chinese, Traditional Chinese,

Japanese, Korean, Thai, Indonesia, Persian)

VGA cable, MHL cable (optional), HDMI-DVI cable (optional), HDMI cable (optional), DP cable

(optional), Audio cable, Power cord, Quick start guide, Warranty card

ASUS VN279 Series LCD Monitor 3-7

Regulation.approvals

Energy Star ® , China Energy Level 1, UL/cUL,

CB, CE, ErP, FCC (Class B), CCC, BSMI, CU,

C-Tick, VCCI, UkrSEPRO, TCO6.0, TUV-GS,

ISO 9241-307, J-MOSS, RoHS, WEEE, PSE,

WHQL for Windows 7 and Windows 8

*Without.audio.and.USB.hub.connection.

**Specifications.are.subject.to.change.without.notice.

3-8 Chapter 3: General Instructions

3.3 Troubleshooting (FAQ)

Problem Possible.Solution

Power LED is not ON

The power LED lights amber and there is no screen image

Screen image is too light or dark

Screen image is not centered or sized properly

Screen image bounces or a wave pattern is present in the image

Screen image has color defects (white does not look white)

Screen image is blurry or fuzzy

No sound or sound is low

• Press the Button to check if the monitor is in the ON mode.

• Check if the power cord is properly connected to the monitor and the power outlet.

• Check if the monitor and the computer are in the ON mode.

• Make sure the signal cable is properly connected the monitor and the computer.

• Inspect the signal cable and make sure none of the pins are bent.

• Connect the computer with another available monitor to check if the computer is properly working.

• Adjust the Contrast and Brightness settings via OSD.

• Press the Button for 2-4 seconds to automatically adjust the image (for VGA mode only).

• Adjust the H-Position or V-Position settings via OSD.

• Make sure the signal cable is properly connected to the monitor and the computer.

• Move electrical devices that may cause electrical interference.

• Inspect the signal cable and make sure that none of the pins are bent.

• Perform All Reset via OSD.

• Adjust the R/G/B color settings or select the Color Temperature via OSD.

• Press the Button for 2-4 seconds to automatically adjust the image (for VGA mode only).

• Adjust the Phase and Clock settings via

OSD.

• Ensure that the HDMI cable is properly connected to the monitor and the computer.

• Adjust the volume settings of both your monitor and HDMI device.

• Ensure that the computer sound card driver is properly installed and activated.

ASUS VN279 Series LCD Monitor 3-9

3.4 Supported operating modes

Resolution.

Frequency

640x480

640x480

640x480

640x480

720x400

800x600

800x600

800x600

800x600

832x624

1024x768

1024x768

1024x768

1152x864

1280x720

1280x768

1280x800

1280x960

1280x1024

1280x1024

1360x768

1366x768

1440x900

1600x1200

1680x1050

1920x1080

(Primary)

Horizontal.

Frequency.(KHz)

31.5

35.0

37.9

37.5

31.5

35.16

37.9

48.1

46.9

49.7

48.4

56.5

60.0

67.5

45

47.78

49.7

60.0

63.4

79.97

47.71

47.71

55.94

75.0

65.3

67.5

60

Vertical.Frequency.

(Hz)

60

67

72

75

70

56

60

70

75

75

60

60

72

75

75

60

60

60

60

60

60

60

60

75

60

Pixel.(MHz)

148.50

66.75

49.50

57.28

65.00

75.00

78.50

108.00

75.25

79.50

25.18

30.24

31.50

31.50

28.32

36.00

40.00

83.50

108.00

108.00

135.00

85.50

85.50

106.50

162.00

146.25

*.Modes.not.listed.in.the.table.may.not.be.supported..For.optimal.resolution,.we.recommend.that.

you.choose.a.mode.listed.in.the.table.above.

*.This.monitor.supports.full.HD.(480p,.576p,.720p,.1080i/p).video.content.from.game.consoles,.DVD.

players.and.other.consumer.video.devices.via.HDMI.

3-10 Chapter 3: General Instructions

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • 68.6 cm (27") LED
  • Full HD 1920 x 1080 pixels 16:9
  • 5 ms 300 cd/m²

Related manuals