Bush heritage ii Quick Start Guide

HERITAGE II CONNECT - QUICK START GUIDE

DAB+ Radio with Wi-Fi, Bluetooth, Internet Radio and Multi-room

QSG-APR15-HERITAGE II CONNECT

1. GETTING STARTED:

a b c

Connect the power cord into the DC-In socket.

Connect the plug to the mains socket.

Press to turn the radio on. “Setup wizard” will be shown when switched on for the first time.

2. SETUP WIZARD

When your Heritage II Connect is stared for the first time, it runs through a setup wizard to configure settings for date/time and network.

Setup wizard

Start no w?

YES NO

Press SELECT/SNOOZE knob to start setting.

Turn and then press SELECT/SNOOZE knob to set

12 or 24 hour format, synchronously update clock from DAB, FM, Network or No update. Keep network connection in all modes and select your network and insert the network password to connect.

When establishing a connection via WPS, you can select

“Push Button” to press SELECT/SNOOZE knob on your radio and SELECT button on your router to eatablish connection; or select “PIN” to enter the

8-digit number which is created by your radio into your router to eastablish connection; also you can select “Skip WPS” if you are using a standard network password and then enter your password to complete the connection.

Setup wizard is completed, press SELECT/SNOOZE knob to exit. “Main menu” will be shown with

“Internet radio” being highlighted. Now, you can select your desired mode.

NOTE: When used outside of network range, this product will always scan for a network connection when the “keep network connection” setting is selected during setup. In this case to disable the “keep network connection” go to MENU>MAIN MENU>SYSTEM SETTINGS

>NETWORK>”Keep Network connected” and set to NO.

3. LISTENING INTERNET RADIO

Mode “Internet Radio” lets you listen to thousands of global

Internet radio stations and Podcasts.

Press SELECT/SNOOZE knob to select “Internet radio” in main menu.

Turn and then press SELECT/SNOOZE knob to select your desired Internet radio station or Podcast.

4. PLAY MUSIC VIA SPOTIFY CONNECT

Your radio has Spotify Connect built-in, this lets you control the music on your radio using the Spotify App on your smartphone, tablet or PC.

5. LISTENING DAB RADIO

Mode “DAB” lets you listen to all digital radio stations in clear crystal sound, with better reception and more choice.

To check if you have coverage in your area, visit: www.digitalradioplus.com.au

Scan

Stations: 12

Scanning

Press MODE button repeatedly to select “DAB” Mode.

For initial use, radio will carry out a full scan and store available DAB stations in memory. Make sure antenna is fully extended.

Turn and then press SELECT/SNOOZE knob to listen to your desired DAB stations.

The Heritage II radio must be connected to the same network as your smartphone or tablet. Open the Spotify

App on your smartphone or tablet and play any song.

Tap the song cover image at the bottom left corner of the screen, and then tap the Spotify

Connect icon .

Tap “Heritage II” from the list.

6. BLUETOOTH / NFC

You can play music from any Bluetooth-enab led device through your Heritage II Connect.

7. UNDOK SMART APP CONTROL

You can control the product using your smartphone with the

UNDOK App installed. Multiroom and Control Volume,

Mode & Stations using UNDOK for the products in the kitchen, bedroom or living room.

Mode

BLUETOOTH:

Press the MODE button until “Bluetooth Mode” appears on the screen.

Enable bluetooth on your device and select your

DAB Digital Radio from the devices list. It will read: Heritage II.

Select the song you want and press play.

NFC:

Press the MODE button until “Bluetooth” appears on the screen.

Make sure your smartphone is set to visible and turn on NFC.

Hold close or TAP your smartphone to the

(NFC logo) mark located on top of your product.

Note: If pairing is not successful you may need to rotate your smartphone while on the mark located on top of the product.

Download UNDOK App from App Store for your iOS smartphone or download from Google Play for your Android smartphone.

Connect your radio to the same WI-FI network as your smartphone. Start UNDOK App.

All available devices will be listed. Tap your radio

“Heritage II” to connect to, then you can control your radio by using your smartphone to switch mode, play music, etc.

For more information and a full version of the User Guide for this product, visit http://www.bushaustralia.com.au/heritage-ii-connect