Agilent U1401A/U1401B Handheld Multi-function

Agilent U1401A/U1401B Handheld
Multi-function Calibrator/Meter
Data Sheet
Calibrate while you measure with just one tool
Agilent handheld multi-function
calibrator/meter has all you need for quick
validation, servicing or troubleshooting of
process control devices on the go. Travel
and test easily with one rugged, featurepacked tool. Agilent now offers its latest
handheld calibrator/meter, the U1401B in
all-new orange, providing capabilities and
functions equivalent to the U1401A.
Features
Dual display with bright LCD backlight
Simultaneous source and measure
Bipolar voltage and current,
square-wave, auto scan and
ramp outputs
Full-span DMM capability, including
temperature and frequency
measurements
Hold and Min/Max/Average recordings
Data logging to PC with optional
IR-to-USB cable
Built-in charging capability
The 2-in-1 that helps you travel light
More often than not, the calibration of
process control parts requires simultaneous
measurements with a DMM. With the
U1401A/U1401B, you can carry two tools in
one—and calibrate while you measure. Slip
the U1401A/U1401B in its sturdy carrying
case and you’re ready to go.
Full-featured DMM functions
The U1401A/U1401B is packed with a full
span of DMM measurement functions,
including AC+DC voltage and current,
resistance, temperature, frequency, diode
and continuity tests. It also equips you with
recording functions such as Hold, Min/Max/
Average and data logging to PC.
Rugged and tested to
stringent standards
The U1401A/U1401B comes with a robust
protective holster and tested to stringent industrial standards. Each U1401A/U1401B is
also sealed with a three-year warranty and
the assurance that you can perform your
calibration tasks with confidence.
Take a closer look
Robust protective holster
Dual display with backlight
4-20 mA and 0-20 mA
percentage scale readout
Hold and Min/Max/Avg
recordings
Easy function access
through intuitive buttons
and rotary switch
Built-in batterycharging capability
Voltage, current, resistance,
temperature, frequency, pulse
width, duty cycle, diode and
continuity
Bipolar voltage and
current, square-wave,
auto scan and ramp
Simultaneous source and measure
2
Input Specifications
The accuracy is given as ± (% of reading + counts of least significant digit (LSD)) at 23 °C ±
5 °C, with relative humidity less than 80% R.H., and after a warm-up period of at least five minutes.
Without warm-up, an additional five counts of LSD need to be considered.
Voltage specifications
Function
DC voltage
AC voltage
Range
[1]
Resolution
Overload protection
Accuracy
[2]
50 mV
1 µV
500 mV
10 µV
5V
0.1 mV
50 V
1 mV
250 V
10 mV
50 mV
1 µV
500 mV
10 µV
5V
0.1 mV
45 Hz to 5 kHz: 0.7% + 20
50 V
1 mV
5 kHz to 20 kHz: 1.5% + 20
250 V
10 mV
50 mV
1 µV
500 mV
10 µV
5V
0.1 mV
45 Hz to 5 kHz: 0.8% + 25
50 V
1 mV
5 kHz to 20 kHz: 1.6% + 25
250 V
10 mV
0.05% + 50
0.03% + 5
[3]
(True-rms: From 5% to
100% of range)
AC+DC voltage
45 Hz to 5 kHz: 0.7% + 40
5 kHz to 20 kHz: 1.5% + 40
[3]
(True-rms: From 5% to
100% of range)
45 Hz to 5 kHz: 0.8% + 70
5 kHz to 20 kHz: 1.6% + 70
[1] Input impedance: 10 MW (nominal) for the range of 5 V and above, and 1 GW (nominal) for the 50/500 mV range.
[2] Accuracy can be improved to 0.05% + 5. Always use the Relative function to offset thermal effects before measuring the signal.
[3] Input impedance: 1.1 MW in parallel with <100 pF (nominal) for the range of 5 V and above, and 1 GW (nominal) for the 50/500 mV range. Crest factor ~ 3.
3
250 Vrms
Current specifications
Function
Range
Resolution
DC current
50 mA
1 µA
500 mA
10 µA
50 mA
1 µA
500 mA
10 µA
50 mA
1 µA
500 mA
10 µA
AC current
[2]
(True-rms: From 5%
to 100% of range)
AC+DC current
[2]
(True-rms: From 5%
to 100% of range)
Burden voltage/shunt
Accuracy
0.03% + 5
[1]
45 Hz to 5 kHz:
0.6% + 20
45 Hz to 5 kHz:
0.7% + 25
0.06 V (1 W)
0.6 V (1 W)
0.06 V (1 W)
0.6 V (1 W)
0.06 V (1 W)
0.6 V (1 W)
[1] Always use the Relative function to offset thermal effects before measuring the signal. If this function is not used, accuracy
could go down to 0.03% + 25. Thermal effects may be present due to:
• Constant current, constant voltage, or square wave output.
• Wrong operation. For example, resistance, diode, or mV measurement function is used to measure high voltage signals exceeding 250 V.
• After battery charging has completed.
• After measuring current greater than 50 mA.
[2] Crest factor ~ 3
4
Overload
protection
250 V, 630 mA
Quick acting fuse
Temperature specifications
Thermocouple type
K
[1]
Range
Resolution
Accuracy
–40 °C to 1372 °C
0.1 °C
0.3% + 3 °C
–40 °F to 2502 °F
0.1 °F
0.3% + 6 °F
Overload protection
250 Vrms
Resistance specifications
The following resistance specifications are valid if the maximum open voltage is less than +4.8 V.
Accuracy
Resolution
Range
500 W
0.01 W
5 kW
0.1 W
50 kW
1W
500 kW
10 W
5 MW
0.1 kW
50 MW
Minimum input current
[2]
0.15% + 8
Overload protection
0.45 mA
0.45 mA
45 µA
[2]
���
����������
0.15% + 5
4.5 µA
250 Vrms
450 nA
1 kW
1% + 8
[3]
45 nA
Diode and continuity specifications
For diode test, the overload protection is 250 Vrms and the instrument will beep when the
reading is below 50 mV (approx). For continuity test, the instrument will beep when the
resistance is less than 10.00 W.
Resolution
Accuracy
Test current
Open voltage
0.1 mV
0.05% + 5
Approximately 0.45 mA
< +4.8 VDC
1 ms peak hold specifications
Signal width
Accuracy for DC mV/voltage/current
Single event >1 ms
2% + 400 for all ranges
[1] Accuracy is specified for meter operation only, excludes thermocouple probe tolerance and with the instrument placed in the operating area for at least one hour.
[2] Accuracy is specified after applying the Relative function to offset any test lead resistance and thermal effect.
[3] Accuracy is specified for <60% R.H.
5
Frequency specifications
Range
Resolution
100 Hz
0.001 Hz
1 kHz
0.01 Hz
10 kHz
0.1 Hz
100 kHz
1 Hz
200 kHz
10 kHz
Accuracy
Minimum input frequency
Overload protection
0.02% + 3
1 Hz
250 Vrms
Frequency sensitivity and trigger level for voltage measurement
Trigger level for DC coupling
Minimum sensitivity
(rms sine wave)
Input range
1 Hz to 100 kHz
>100 kHz
<20 kHz
20 kHz to 200 kHz
50 mV
15 mV
25 mV
20 mV
30 mV
500 mV
35 mV
50 mV
60 mV
80 mV
5V
0.3 V
0.5 V
0.6 V
0.8 V
50 V
3V
5V
6V
8V
250 V
30 V
–
60 V
–
Frequency sensitivity for current measurement
Minimum sensitivity (rms sine wave)
Input range
30 Hz to 20 kHz
50 mA
2.5 mA
500 mA
25 mA
Duty cycle and pulse width
Function
Duty cycle
Pulse width
[2]
Mode
Range
DC coupling
0.1% to 99.9%
AC coupling
5% to 95%
–
Accuracy at full scale
0.3% per kHz + 0.3%
0.01 ms to 1999.9 ms
[1] Accuracy is based on a 5-V square-wave input to the 5 VDC range.
[2] Pulse width must be greater than 10 µs and its range is determined by the frequency of the signal.
6
0.2% + 3
[1]
Output Specifications
Accuracy is given as ± (% of output + counts of least significant digit (LSD)) at 23 °C ± 5 °C,
with relative humidity less than 80% R.H., and after a warm-up period of at least five minutes.
The maximum input voltage protection is 30 VDC.
Constant voltage and current outputs
Function
Range
Resolution
Constant voltage (CV)
± 1.500 V
0.1 mV
± 15.000 V
1 mV
± 25.000 mA
1 µA
Constant current (CC)
Accuracy
Minimum output
0.03% + 3
25 mA or above
0.03% + 5
12 V or above
[1]
[2][3]
Square wave output
Output
Range
Frequency (Hz)
0.5, 1, 2, 5, 10, 15, 20, 25, 30, 40, 50, 60, 75,
80, 100, 120, 150, 200, 240, 300, 400, 480,
600, 800, 1200, 1600, 2400, 4800
Duty Cycle (%)
[4]
Pulse Width (ms)
Amplitude (V)
[4]
Resolution
Accuracy
0.01
0.005% + 1
[5]
0.39% to 99.60%
0.390625%
0.01% + 0.2%
1/Frequency
Range/256
0.01% + 0.3 ms
5 V, 12 V
0.1 V
±5 V, ±12 V
2% + 0.2 V
2% + 0.4 V
[1] Loading coefficient: 0.012 mV/mA for 1.5 V output.
[2] Loading coefficient: 1 µA/ V. The minimum output voltage is based on 20 mA into a 600 W load.
[3] If the current loop has a 24-V power, a minimum output voltage of 24 V is achievable with a 20 mA current into a 1200-W load (using the yellow test lead).
[4] The positive or negative pulse width must be greater than 50 µs to enable adjustment of duty cycle or pulse width under different frequencies. Otherwise, the accuracy and range will
be different from the specifications defined.
[5] For signal frequencies greater than 1 kHz, add an addition of 0.1% per kHz.
7
General Specifications
Display
Power supply
Both primary and secondary displays are 5-digit on the liquid crystal display (LCD) with a
maximum resolution of 51,000 counts and automatic polarity indication. Backlight available.
9.6 V Ni-MH rechargeable batteries: 1.2 V x 8 pieces. No cadmium, lead or mercury.
External switching adapter: AC 100 V to 240 V, 50/60 Hz input and DC 24 V/2.5 A output
Power consumption
Battery charging: 9.3 VA typical
Sourcing of constant current at 25 mA, maximum load: 5.5 VA typical on 24 V DC adapter,
2.4 VA typical on 9.6 V batteries
Meter only: 1.8 VA typical on 24 V DC adapter, 0.6 VA typical on 9.6 V batteries
Battery life
Assuming fully-charged Ni-MH batteries:
Meter only: 20 hours (approx.)
Source/Meter: 4 hours (approx.)
will appear when voltage drops below 9 V (approx.)
Charging time
3 hours (approx.) in 10 °C to 30 °C environment
NOTE: Prolonged charging is required if battery is fully discharged.
Measurement rate
3 readings/second, except for:
AC+DC: 1 reading/second
Frequency and duty cycle (> 1 Hz): 1 reading/second
Pulse width (> 1 Hz): 0.25 to 1 reading/second
Common Mode Rejection Ratio (CMRR)
> 90 dB at DC, 50/60 Hz ± 0.1% (1 kW unbalanced)
Normal Mode Rejection Ratio (NMRR)
> 60 dB at DC, 50/60 Hz ± 0.1%
Operating environment
0 °C to 40 °C; up to 80% relative humidity (R.H.) for temperatures up to 31 °C,
decreasing linearly to 50% R.H. at 40 °C
Storage environment
–20 °C to 60 °C with batteries removed; 5% to 80% R.H. non-condensing
Altitude
0 to 2000 m
Safety compliance
IEC 61010-1:2001/EN61010-1:2001 (2nd Edition), CAN/CSA-C22.2 No. 61010-1-04,
ANSI/UL 61010-1:2004, CAT II 150 V Overvoltage Protection, Pollution Degree 2
EMC compliance
IEC61326-2-1:2005/EN61326-2-1:2006, ICES-001:2004, AS/NZS CISPR11:2004
Temperature coefficient
Input: 0.15 x (specified accuracy)/°C (from 0 °C to 18 °C or 28 °C to 40 °C)
Output: ±(50 ppm output + 0.5 digit)/°C
Dimensions (H x W x D)
192 mm x 90 mm x 54 mm
Weight
0.98 kg with holster and batteries
Calibration
One-year calibration cycle recommended
Warranty
3 years for main unit
3 months for standard accessories unless otherwise specified
8
Ordering Information
Standard shipped items
U1401A
U1401B
Quick Start Guide
Certificate of Calibration (CoC)
Calibrator/Meter standard
test lead kit
Yellow test lead for mA
simulation
Protective holster
Rechargeable battery pack
AC power adapter and cord
(according to country)
* Soft carrying case is included for U1401A
Optional accessories
U5481A IR-to-USB cable
U1168A Standard test lead kit
U1186A K-type thermocouple and adapter
U5491A Soft carrying case
More accessories at: www.agilent.com/find/handheld-calibrator-meter
9
U1181A Immersion temperature probe
U1182A Industrial surface temperature probe
U1183A Air temperature probe
U5402A Yellow test lead for mA simulation
www.agilent.com
www.agilent.com/find/handheldcalibrator-meter
Agilent Email Updates
www.agilent.com/find/emailupdates
Get the latest information on the
products and applications you select.
Agilent Direct
www.agilent.com/find/agilentdirect
Quickly choose and use your test
equipment solutions with confidence.
Remove all doubt
Our repair and calibration services
will get your equipment back to you,
performing like new, when promised. You will get full value out of
your Agilent equipment throughout its lifetime. Your equipment
will be serviced by Agilent-trained
technicians using the latest factory
calibration procedures, automated
repair diagnostics and genuine parts.
You will always have the utmost
confidence in your measurements.
Agilent offers a wide range of additional expert test and measurement services for your equipment,
including initial start-up assistance
onsite education and training, as
well as design, system integration,
and project management.
For more information on repair and
calibration services, go to
www.agilent.com/find/removealldoubt
Product specifications and descriptions
in this document subject to change
without notice.
For more information on Agilent Technologies’
products, applications or services, please
contact your local Agilent office. The complete list is available at:
www.agilent.com/find/contactus
Phone or Fax
Americas
Canada
Latin America
United States
(877) 894-4414
305 269 7500
(800) 829-4444
Asia Pacific
Australia
China
Hong Kong
India
Japan
Korea
Malaysia
Singapore
Taiwan
Thailand
1 800 629 485
800 810 0189
800 938 693
1 800 112 929
0120 (421) 345
080 769 0800
1 800 888 848
1 800 375 8100
0800 047 866
1 800 226 008
Europe & Middle East
Austria
Belgium
Denmark
Finland
France
01 36027 71571
32 (0) 2 404 93 40
45 70 13 15 15
358 (0) 10 855 2100
0825 010 700*
*0.125 /minute
07031 464 6333
Germany
1890 924 204
Ireland
972-3-9288-504/544
Israel
39 02 92 60 8484
Italy
31 (0) 20 547 2111
Netherlands
34 (91) 631 3300
Spain
0200-88 22 55
Sweden
0800 80 53 53
Switzerland
44 (0) 118 9276201
United Kingdom
Other European Countries:
www.agilent.com/find/contactus
Revised: October 6, 2008
© Agilent Technologies, Inc. 2009
Printed in USA, November 26, 2009
5990-3459EN
Agilent U1177A
IR-to-Bluetooth Adapter
Data Sheet
Features
•
Enables Bluetooth® connection to Agilent handheld
digital multimeters
•
Easy to install by attaching
to Infrared (IR) port located
at the back of Agilent handheld digital multimeters
•
Compatible with Agilent
U1230 series, U1240 series,
U1250 series and U1270
series handheld digital
multimeters
•
Operated by two 1.5 V AAA
batteries
The Bluetooth® word mark and logos are
registered trademark owned by Bluetooth
SIG, Inc and any use of such marks by
Agilent Technologies, Inc. is under license.
Other trademark and trade names are those
of their respective owners.
Agilent U1177A Infrared (IR)-to-Bluetooth® adapter offers wireless
remote connectivity solution via Bluetooth® connection simply by
attaching the adapter to the IR port of an Agilent handheld digital
multimeter. The wireless remote connectivity is set up when an
Agilent handheld digital multimeter is connected to U1177A and an
Android device (tablet or smart phone) with the installed software.
Every U1177A also has a unique Media Access Control (MAC)
address. User can quickly and easily scan for the right U1177A using
their Android device and pair up with the U1177A.
Figure 1. Agilent wireless remote connectivity solution
Take a closer look
Low battery indication:
Red LED flashing
Bluetooth® disconnected:
Green LED flashing
Bluetooth® connected:
Green solid LED
Bluetooth® power off:
LED off
ON/OFF/Setup
slide switch
Figure 2. The U1177A as illustrated
2
Perform data logging with multimeters – wirelessly!
Data logging is an important function for industrial users to capture data
streams or plotting trending graphs. These data and graphs are used for analysis
to identify intermittent behavior or detect drifts. Agilent Mobile Logger is the
free Android application software that logs data and provides trending graphs
from Agilent handheld digital multimeters. Agilent Mobile Logger offers an array
of extended functions such as sending e-mail or Short Message Service (SMS)
automatically, and pan and zoom function via the Android device’s touch screen.
Alternatively, data logging and monitoring activities can also be performed at the
comfort of one’s Personal Computer (PC) via a downloadable Agilent GUI data
logger software.
Notes:
1. Agilent Mobile Meter and Agilent Mobile Logger can be downloaded from www.agilent.com/
find/hh-Android or from Android Market (https://market.android.com/)
2. Agilent GUI Data Logger Software can be www.agilent.com/find/hh-logger
Figure 3. Data logging with Agilent
Mobile Logger software.
Perform up to three multimeter measurements at the same time
with Agilent Mobile Meter
Agilent Mobile Meter is a free Android application software that allows an
Android device to connect, control and perform up to 3 multimeter measurements. Without the need to be physically present at various points, users can
now extend their reach to two or three places. This solution allows you to make
measurements from a safe distance, eliminates the need to walk back-and-forth
between measure target and control points, and monitors multiple measurements simultaneously. Achieve higher work productivity when you use the
U1177A with your Agilent handheld digital multimeters.
Figure 4. Up to three multimeters
measurements with the Agilent
Mobile Meter
Figure 5. Make measurements with the Agilent Mobile Meter via an Android smart phone
3
Specifications
Product characteristics
Description
Radio specification
•
•
•
•
Operating environment
Operating temperature from –20 to 55 °C
Storage environment
Storage temperature from –40 to 70 °C
Relative humidity (R.H.)
Relative humidity up to 95% at 40 °C (non-condensing)
Power consumption
Maximum 130 mVA for two 1.5 V AAA batteries
Battery life
30 hours typical (based on continuous data transfer)
Battery type
Alkaline 24 A (ANSI/NEDA) and LR03 (IEC), or Zinc Chloride 24 D (ANSI/NEDA)
and R03 (IEC)
Dimension (W x H x L)
39.0 × 71.0 × 37.0 mm
Weight
60 g with batteries
Warranty
Three months
Bluetooth
"Bluetooth" Version 2.1 + EDR compliant, SPP profile, Class 2 device
(with 10 metres connection range)
Safety
Frequency: 2402 MHz ~ 2480 MHz
Antenna Power: 1 mW or less
Number of Channels: 79
Modulation: GFSK / PSK
The U1177A complies with the requirements of the following safety and regulation
standards:
• FCC Part15C (Certification) (15.209, 15.247) FCC ID: ZKMAGILENT-U1177A
• FCC Part15B (DoC) (15.109)
• RSS–210 Issue 8:2010 IC: 6310A–U1177A
• ICES–003 Issue 4:2004
• EN 300 328 V1.7.1:2008
• EN 301 489–1V1.8.1:2008/–17 V2.11:2009
• EN 55022:2006+A1:2007/EN55024:1998+A1:2001+A2:2003
• EN 50371:2002
• EN 60950–1:2006/A11:2009/A1:2010
• Complies with IDA Standards (DB 102425)
• India Equipment Type Approval (ETA) Certificate No: 1424/2011/WRLO
• COFETEL Certificate No: RCPAGU111-1066, registered under Agilent Technologies
Mexico S de RL de CV
"This telecommunication equipment conforms NTC technical requirement"
Standard shipped items:
• Two 1.5 V AAA batteries
• Operating instructions
4
www.agilent.com
www.agilent.com/find/U1177A
For more information on Agilent
Technologies’ products, applications or
services, please contact your local Agilent
office. The complete list is available at:
Agilent Email Updates
www.agilent.com/find/emailupdates
Get the latest information on the
products and applications you select.
www.axiestandard.org
AdvancedTCA® Extensions for
Instrumentation and Test (AXIe) is
an open standard that extends the
AdvancedTCA for general purpose
and semiconductor test. Agilent
is a founding member of the AXIe
consortium.
www.lxistandard.org
LAN eXtensions for Instruments puts
the power of Ethernet and the Web
inside your test systems. Agilent
is a founding member of the LXI
consortium.
www.pxisa.org
PCI eXtensions for Instrumentation
(PXI) modular instrumentation
delivers a rugged, PC-based highperformance measurement and
automation system.
Agilent Channel Partners
www.agilent.com/find/channelpartners
Get the best of both worlds: Agilent’s
measurement expertise and product
breadth, combined with channel
partner convenience.
Agilent Advantage Services is committed
to your success throughout your equipment’s lifetime. To keep you competitive,
we continually invest in tools and
processes that speed up calibration and
repair and reduce your cost of ownership.
You can also use Infoline Web Services
to manage equipment and services more
effectively. By sharing our measurement
and service expertise, we help you create
the products that change our world.
www.agilent.com/find/advantageservices
www.agilent.com/quality
www.agilent.com/find/contactus
Americas
Canada
Brazil Mexico
United States
(877) 894 4414
(11) 4197 3600
01800 5064 800
(800) 829 4444
Asia Pacific
Australia 1 800 629 485
China
800 810 0189
Hong Kong 800 938 693
India 1 800 112 929
Japan
0120 (421) 345
Korea
080 769 0800
Malaysia 1 800 888 848
Singapore 1 800 375 8100
Taiwan
0800 047 866
Other AP Countries (65) 375 8100
Europe & Middle East
Belgium 32 (0) 2 404 93 40
Denmark
45 45 80 12 15
Finland
358 (0) 10 855 2100
France
0825 010 700*
*0.125 €/minute
Germany
49 (0) 7031 464 6333
Ireland
1890 924 204
Israel972-3-9288-504/544
Italy
39 02 92 60 8484
Netherlands
31 (0) 20 547 2111
Spain
34 (91) 631 3300
Sweden
0200-88 22 55
United Kingdom 44 (0) 118 927 6201
For other unlisted countries:
www.agilent.com/find/contactus
Revised: January 6, 2012
Product specifications and descriptions
in this document subject to change
without notice.
© Agilent Technologies, Inc. 2012
Published in USA, February 2, 2012
5990-9531EN