Tuttnauer T-EDGE Wi-Fi Quick Start Guide

WI-FI CONFIGURATION

Prior to operating the autoclave for the first time, please connect the Wi-Fi and ensure it remains connected at all times.

The Wi-Fi connection is used for uploading all data information from devices in the field, to the online company's server.

This data is used for:

• Monitoring

• Viewing and downloading device history

• Software updates while validating the integrity of the update (applicable for users with Tuttnauer code)

The data is backed-up on the device main board.

Note: In case of connection failure, the data may be exported manually.

To connect the Wi-Fi:

1. In the Quick Option screen, press the Wifi Configuration option .

2. To enable the connection, press .

3. The Wifi Configuration screen is displayed with the available networks.

T-Edge Quick Start Guide

4. Select your network, enter your Password and press the Accept privacy policy.

5. Press .

6. The Wi-Fi is connected successfully. Press .

USER INTERFACE

Top bar

Pressure and temperature in sterilization chamber

Clean Water tank

Waste Water Tank

Door condition

Main screen area changes based on state of system

Page navigation arrows (left/right)

Alert indication

T-Edge Quick Start Guide