Casio PHOTO LOADER - VER.3.0 FOR WINDOWS User`s guide

E
Digital Camera
EX-Z50
User’s Guide
Thank you for purchasing this CASIO
product.
• Before using it, be sure to read the
precautions contained in this User’s Guide.
• Keep the User’s Guide in a safe place for
future reference.
• For the most up-to-date information about
this product, visit the official EXILIM
Website at http://www.exilim.com/.
K879PCM1DKX
INTRODUCTION
INTRODUCTION
Unpacking
Check to make sure that all of the items shown below are included with your camera. If something is missing, contact your
dealer as soon as possible.
Camera
Rechargeable Lithium Ion Battery
(NP-40)
CD-ROM
USB Cradle
(CA-24)
USB Cable
Strap
Basic Reference
* The shape of the AC
power cord plug varies
according to country or
geographic area.
Special AC Adaptor (Inlet Type)
(AD-C51G)
AC Power Cord *
2
○ ○ ○ ○ ○ ○ ○
• Note that the shape of the AC adaptor depends on the area where you purchased the camera.
Special AC Adaptor (Plug-in Type)
(AD-C51J)
INTRODUCTION
20
Contents
GETTING READY
About This Manual ..................................................... 20
2
INTRODUCTION
General Guide ............................................................ 21
Camera
USB Cradle
Unpacking .................................................................... 2
Monitor Screen Contents ........................................... 24
Features ....................................................................... 9
Changing the Contents of the Monitor Screen
Precautions ................................................................ 12
16
21
23
26
Attaching the Strap .................................................... 28
Power Requirements .................................................. 29
QUICK START GUIDE
Loading and Removing the Rechargeable Battery
To charge the battery
Power Supply Precautions
Turning the Camera On and Off
Configuring Power Saving Settings
First, charge the battery! ............................................ 16
To configure display language and clock settings ..... 17
To record an image .................................................... 18
29
31
36
39
41
Using the On-screen Menus ...................................... 42
To view a recorded image .......................................... 19
Configuring Display Language and Clock Settings ... 44
To delete an image ..................................................... 19
To configure display language and clock settings
3
45
INTRODUCTION
48
Adjusting White Balance ............................................ 78
BASIC IMAGE RECORDING
Configuring the White Balance Setting Manually
Recording an Image ................................................... 48
Specifying the Recording Mode
Aiming the Camera
Recording an Image
48
49
50
Creating Your Own BESTSHOT Setup
To delete a BESTSHOT user setup
Using Zoom ................................................................ 55
Recording a Subject onto an Existing
Background Image (Pre-shot) .................................... 87
55
57
Recording Images of Business Cards and
Documents (Business Shot) ...................................... 89
Using the Flash .......................................................... 59
Flash Unit Status
Changing the Flash Intensity Setting
Using Flash Assist
60
61
61
To use Business Shot
Recording Audio ......................................................... 94
Adding Audio to a Snapshot
Recording Your Voice
Specifying Image Size ............................................... 65
Specifying Image Quality ........................................... 66
REC Mode Camera Settings ...................................... 99
Specifying ISO Sensitivity
Specifying Outline Sharpness
Specifying Color Saturation
Specifying Contrast
Turning the On-screen Grid On and Off
Turning Image Review On and Off
Using Icon Help
Assigning Functions to the [] and [] Keys
Specifying Power On Default Settings
Resetting the Camera
Selecting the Focus Mode ......................................... 68
Auto Focus
the Macro Mode
Pan Focus
the Infinity Mode
Manual Focus
Focus Lock
94
95
Using the Histogram ................................................... 97
OTHER RECORDING FUNCTIONS
Using
Using
Using
Using
Using
Using
90
Using the Movie Mode ............................................... 91
Using the Self-timer ................................................... 63
68
83
84
Combining Shots of Two People into
a Single Image (Coupling Shot) ................................. 85
Using the Optical Viewfinder ...................................... 54
Optical Zoom
Digital Zoom
79
Using the BESTSHOT Mode ..................................... 81
69
71
72
73
74
75
Exposure Compensation (EV Shift) ........................... 76
4
100
101
101
102
102
103
103
104
105
107
INTRODUCTION
108
PLAYBACK
127
Basic Playback Operation ........................................ 108
Playing an Audio Snapshot
FILE MANAGEMENT
Folders ...................................................................... 127
109
Memory Folders and Files
Flipping the Display .................................................. 110
127
Protecting Files ........................................................ 128
To protect a single file
To protect all files in memory
Zooming the Display Image ..................................... 111
Resizing an Image ................................................... 112
128
129
Using the FAVORITE Folder .................................... 129
Cropping an Image ................................................... 113
To
To
To
To
Playing a Movie ........................................................ 114
Displaying the 9-image View .................................... 115
copy a file to the FAVORITE folder
display a file in the FAVORITE folder
delete a file from the FAVORITE folder
delete all files from the FAVORITE folder
129
131
132
132
Displaying the Calendar Screen .............................. 116
133
Playing a Slideshow ................................................. 117
Using the Photo Stand Feature
Configuring Sound Settings ..................................... 133
Rotating the Display Image ...................................... 120
To configure sound settings
To set the volume level
Using Image Roulette .............................................. 121
Adding Audio to a Snapshot .................................... 122
To re-record audio
133
134
Specifying an Image for the Startup Screen ........... 134
123
Configuring Power Down Image Settings ................ 135
Playing Back a Voice Recording File ....................... 124
125
OTHER SETTINGS
119
Specifying the File Name Serial Number
Generation Method .................................................. 137
DELETING FILES
Using the Alarm ....................................................... 137
Setting the Clock ...................................................... 139
Deleting a Single File ............................................... 125
To select your Home Time zone
To set the current time and date
Changing the Date Format
Deleting All Files ...................................................... 126
5
139
140
140
INTRODUCTION
Using World Time ..................................................... 141
To display the World Time screen
To configure World Time settings
152
141
141
DPOF ........................................................................ 153
To configure print settings for a single image
To configure print settings for all images
Changing the Display Language .............................. 142
Changing the USB Port Protocol ............................. 143
PRINT Image Matching III ............................................ 159
Exif Print ................................................................... 159
Formatting Built-in Memory ...................................... 145
160
USING A MEMORY CARD
VIEWING IMAGES ON A COMPUTER
Using the Camera with a Windows Computer ......... 160
Using a Memory Card .............................................. 147
To insert a memory card into the camera
To remove a memory card from the camera
Formatting a Memory Card
154
155
Using PictBridge or USB DIRECT-PRINT ............... 156
Configuring [
] (REC) and [
] (PLAY)
Power On/Off Functions ........................................... 144
146
PRINTING IMAGES
147
148
148
Using the Camera with a Macintosh Computer ....... 166
Copying Files ............................................................ 150
Using a Memory Card to Transfer Images to a
Computer .................................................................. 171
To copy all the files in built-in memory to a
memory card
To copy a specific file from a memory card to built-in
memory
Operations You Can Perform from Your Computer .... 170
150
Memory Data ............................................................ 172
DCF Protocol
Memory Folder Structure
Image Files Supported by the Camera
151
6
172
172
174
INTRODUCTION
175
USING THE CAMERA WITH A COMPUTER
192
Using the Album Feature ......................................... 175
Creating an album
Selecting an Album Layout
Configuring Detailed Album Settings
Viewing Album Files
Saving an Album
To delete an album
Menu Reference ....................................................... 192
175
177
177
180
182
183
Indicator Lamp Reference ........................................ 195
Troubleshooting Guide ............................................. 198
If you have problems installing the USB driver...
Display Messages
183
185
Installing Software from the CD-ROM in Windows ... 186
Getting Started
Selecting a Language
Viewing the Contents of the “Read me” File
Installing an Application
Viewing User Documentation (PDF Files)
User Registration
Exiting the Menu Application
187
187
187
188
188
189
189
Installing Software from the
CD-ROM on a Macintosh ......................................... 189
Installing Software
Viewing User Documentation (PDF Files)
201
202
Specifications ........................................................... 204
Installing the Software from the CD-ROM ............... 183
About the bundled CD-ROM (CASIO Digital Camera
Software)
Computer System Requirements
APPENDIX
189
190
7
INTRODUCTION
• Macintosh is a registered trademark of Apple
Computer, Inc.
• MultiMediaCard is a trademark of Infineon
Technologies AG of Germany, and licensed to the
MultiMediaCard Association (MMCA).
• Adobe and Reader are either registered trademarks
or trademarks of Adobe Systems Incorporated in the
United States and/or other countries.
• The USB driver (mass storage) uses Phoenix
Technologies Ltd. software.
Compatibility Software Copyright C 1997
Phoenix Technologies Ltd., All Rights Reserved.
• Other company, product and service names used
herein may also be trademarks or service marks of
others.
• Photo Loader and Photohands are the property of
CASIO COMPUTER CO., LTD. Except as stipulated
above, all copyrights and other related rights to these
applications revert to CASIO COMPUTER CO., LTD.
IMPORTANT!
• The contents of this manual are subject to change
without notice.
• CASIO COMPUTER CO., LTD. assumes no
responsibility for any damage or loss resulting from
the use of this manual.
• CASIO COMPUTER CO., LTD. assumes no
responsibility for any loss or claims by third parties
which may arise through the use of the EX-Z50.
• CASIO COMPUTER CO., LTD. shall not be held
liable for any damages or losses suffered by you or
any third party due to the use of Photo Loader and/or
Photohands.
• CASIO COMPUTER CO., LTD. assumes no
responsibility for any damage or loss caused by
deletion of data as a result of malfunction, repairs, or
battery replacement. Be sure to back up all important
data on other media to protect against its loss.
• Note that the example screens and product
illustrations shown in this User’s Guide may differ
somewhat by the screens and configuration of the
actual camera.
• The SD logo is a registered trademark.
• Windows, Internet Explorer, and DirectX are
registered trademarks of Microsoft Corporation.
8
INTRODUCTION
■ Copyright Restrictions
Except for the purposes of your own personal enjoyment,
unauthorized copying of snapshot files, movie files, and
audio files violates copyright laws and international
contracts.
Distribution to third parties of such files over the Internet
without permission of the copyright holder, whether for
profit or for free, violates copyright laws and international
contracts.
Features
• 5 million effective pixels
The CCD provides 5.25 million total pixels of very highresolution for crisp, clear, prints and display images.
• 2.0-inch TFT color LCD monitor screen
• Long battery life
A low-power design combines with a large-capacity
battery to provide more recording and playback between
charges.
• 12X zoom (page 55)
3X optical zoom, 4X digital zoom
• 9.3MB flash memory
Images can be recorded without using a memory card.
• REC mode or PLAY mode power up (page 39)
Press [
] (REC) or [
] (PLAY) to turn on the camera
and enter the mode you want to use.
• Multi Auto Focus (page 70)
When “Multi” is selected for the Auto Focus area, the
camera takes simultaneous meter readings at seven
different points and automatically selects the best one.
• Pan Focus (page 72)
This feature lets you lock the focus point.
9
INTRODUCTION
• Coupling Shot and Pre-shot (pages 85, 87)
Coupling Shot lets you combine two subjects into a single
image, while Pre-shot lets you add a subject to a
previously recorded background image. This means you
can create images that include you and your friend, even
if you are the only two people around.
• Auto Pan Focus (page 69)
When you press the shutter button all the way down
without pausing, the camera immediately records the
image without waiting for Auto Focus to be performed.
This helps to avoid missing a special moment while you
wait for the camera to Auto Focus.
• Support for SD memory cards and MMC (MultiMedia
Cards) for memory expansion (page 146)
• Triple Self-timer (page 63)
The self-timer can be set up to repeat three times,
automatically.
• Bundled with a USB Cradle (pages 31, 119, 156, 160)
The bundled USB cradle can be used to charge the
camera’s battery, and to transfer images to a computer. A
Photo Stand feature lets you view images while the
camera is on the cradle.
• Real-time histogram (page 97)
An on-screen histogram lets you adjust exposure as you
view the effect on overall image brightness.
• World Time (page 141)
A simple operation sets the current time for your current
location. You can select from among 162 cities in 32 time
zones.
• BESTSHOT (page 81)
Simply select the sample scene that matches the type of
image you are trying to record and the camera performs
troublesome setups automatically for beautiful pictures
every time.
• Alarm (page 137)
A built-in alarm helps to keep you on time for important
events, and even can be used in place of an alarm clock.
You can also have a specific image appear, or a movie or
audio file to play when the alarm time is reached.
• Business Shot (page 89)
Business Shot automatically corrects rectangular shapes
when recording the image of a business card, document,
whiteboard, or similar subjects from an angle.
10
INTRODUCTION
• Selectable Sound Settings (page 133)
You can configure different sounds to play whenever you
turn on the camera, press the shutter button half-way or
all the way, or perform a key operation.
• Album Function (page 175)
HTML files are generated automatically to create an
album of recorded images. Album contents can be viewed
and printed using a standard Web browser. Images can
also be incorporated into Web pages quickly and easily.
• DCF Data Storage (page 172)
DCF (Design rule for Camera File system) data storage
protocol provides image compatibility between the digital
camera and printers.
• Calendar screen (page 116)
A simple operation displays a full-month calendar on the
camera’s monitor screen. Each day of the full-month
calendar shows a thumbnail of the first image recorded
for that date, which helps to make searching for a
particular image quicker and easier.
• Digital Print Order Format (DPOF) (page 153)
Images can be printed easily in the sequence you want
using a DPOF compatible printer. DPOF can also be used
when specifying images and quantities for printing by
professional print services.
• Audio Snapshot Mode (page 94)
Use this mode to record snapshots that also include
audio.
• PRINT Image Matching III Compatible (page 159)
Images include PRINT Image Matching III data (mode
setting and other camera setup information). A printer that
supports PRINT Image Matching III reads this data and
adjusts the printed image accordingly, so your images
come out just the way you intended when you recorded
them.
• Movie + Audio Mode (page 91)
• Voice Recording (page 95)
Quick and easy recording of voice input.
• After Recording (page 122)
Use this mode to add audio to snapshots after you record
them.
11
INTRODUCTION
• USB DIRECT-PRINT and PictBridge support (page 156)
Connect directly to a USB DIRECT-PRINT or PictBridge
compatible printer and you can print images without going
through a computer.
Precautions
■ General Precautions
Be sure to observe the following important precautions
whenever using the EX-Z50.
• Bundled with Photo Loader and Photohands (page 184)
Your camera comes bundled with Photo Loader, the
popular application that automatically loads images from
your camera to your PC. It also comes with Photohands,
and application that makes image retouching quick and
easy.
All references in this manual to “camera” refer to the
CASIO EX-Z50 Digital Camera.
• Never try to take pictures or use the built-in display while
operating a motor vehicle or while walking. Doing so
creates the risk of serious accident.
• Never try to open the case of the camera or attempt your
own repairs. High-voltage internal components create the
risk of electric shock when exposed. Always leave
maintenance and repair work up to a CASIO authorized
service center.
• Never look at the sun or any other bright light through the
camera’s viewfinder. Doing so can damage your eyesight.
• Keep the small parts and accessories of this camera out
of the reach of small children. If swallowed accidentally,
contact your physician immediately.
• Never fire the flash in the direction of a person operating
a motor vehicle. Doing so can interfere with the driver’s
vision and create the risk of accident.
12
INTRODUCTION
• Never use the AC adaptor to power any other device
besides this camera. Never use any other AC adaptor
besides the one that comes with this camera.
• Never cover the AC adaptor with a quilt, blanket, or other
cover while it is in use, and do not use it near a heater.
• At least once a year, unplug the AC adaptor power cord
from the power outlet and clean the area around the
prongs of the plug. Dust build up around the prongs can
create the risk of fire.
• If the camera’s case should ever become cracked due to
dropping it or otherwise subjecting it to rough treatment,
immediately turn it off. Next, remove the camera’s battery
and/or unplug the AC adaptor power cord from the power
outlet, and contact your dealer or nearest CASIO
authorized service center.
• Never use the camera inside of an aircraft or in any other
area where its use is prohibited. Doing so creates the risk
of accident.
• Physical damage and malfunction of this camera can
cause the data stored in its memory to be deleted. Always
keep backup copies of data by transferring them to
personal computer memory.
• Never open the battery cover, disconnect the AC adaptor
from the camera, or unplug the AC adaptor from the wall
socket while an image is being recorded. Doing so will not
only make storage of the current image impossible, it can
also corrupt other image data already stored in file
memory.
• Never fire the flash while it is too close to the subject’s
eyes. Intense light from the flash can cause eye damage
if it is fired too close to the eyes. This is especially true
with young children. When using the flash, the camera
should be at least one meter (3.3´) from the eyes of the
subject.
• Keep the camera away from water and other liquids, and
never let it get wet. Moisture creates the risk of fire and
electric shock. Never use the camera outdoors in the rain
or snow, at the seashore or beach, in the bathroom, etc.
• Should foreign matter or water ever get into the camera,
immediately turn it off. Next, remove the camera’s battery
and/or unplug the AC adaptor power cord from the power
outlet, and contact your dealer or nearest CASIO
authorized service center. Using the camera under these
conditions creates the risk of fire and electric shock.
• Should you ever notice smoke or a strange odor coming
out of the camera, immediately turn it off. Next, taking
care you do not burn your fingers, remove the camera’s
battery and/or unplug the AC adaptor power cord from the
power outlet, and contact your dealer or nearest CASIO
authorized service center. Using the camera under these
conditions creates the risk of fire and electric shock. After
making sure there is no more smoke coming from the
camera, take it to your nearest CASIO authorized service
center for repair. Never attempt your own maintenance.
13
INTRODUCTION
■ Test for proper operation before using the
camera!
Any of the above conditions can cause an error message to
appear on the monitor screen (page 202). Follow the
instructions provided by the message to eliminate the
cause of the error.
Before using the camera to record important images, make
sure you first record a number of test images and check the
results to ensure that the camera is configured correctly
and operating properly (page 16).
■ Operating conditions
• This camera is designed for use in temperatures ranging
from 0°C to 40°C (32°F to 104°F).
• Do not use or keep the camera in the following areas.
■ Data Error Precautions
• Your digital camera is manufactured using precision
digital components. Any of the following creates the risk
of corruption of data in file memory.
— In areas subject to direct sunlight
— In areas subject to high humidity or dust
— Near air conditioners, heaters, or other areas subject
to temperature extremes
— Inside of a closed vehicle, especially one parked in the
sun
— In areas subject to strong vibration
— Removing the battery or memory card, or setting the
camera onto the USB cradle while the camera is
performing a record or memory access operation
— Removing the battery, removing the memory card, or
placing the camera onto the USB cradle while the
green operation lamp is still flashing after you turn off
the camera
— Disconnecting the USB cable, removing the camera
from the USB cradle, or disconnecting the AC adaptor
from the USB cradle while a data communication
operation is being performed
— Low battery power
— Other abnormal operations
14
INTRODUCTION
■ Condensation
■ Lens
• When you bring the camera indoors on a cold day or
otherwise expose it to a sudden change of temperature,
there is the possibility that condensation can form on the
exterior or on interior components. Condensation can
cause malfunction of the camera, so you should avoid
exposing it to conditions that might cause condensation.
• To keep condensation from forming, place the camera
into a plastic bag before moving it into a location that is
much warmer or colder than your current location. Leave
it in the plastic bag until the air inside the bag has a
chance to reach the same temperature as the new
location. If condensation does form, remove the battery
from the camera and leave the battery cover open for a
few hours.
• Never apply too much force when cleaning the surface of
the lens. Doing so can scratch the lens surface and cause
malfunction.
• Fingerprints, dust, or any other soiling of the lens can
interfere with proper image recording. Never touch the
lens with your fingers. You can remove dust particles
from the lens surface by using a lens blower to blow them
off. Next, wipe the surface of the lens with a soft lens
cloth.
■ Other
• The camera may become slightly warm during use. This
does not indicate malfunction.
• If the exterior of the camera needs cleaning, wipe it with a
soft, dry cloth.
15
QUICK START GUIDE
QUICK START GUIDE
First, charge the battery!
1. Load the battery into the camera
(page 29).
1
2. Place the camera onto the USB cradle to charge the
battery (page 31).
• Note that the shape of the AC adaptor depends on the area where
you purchased the camera.
• It takes about 190 minutes to achieve a full charge.
1 Inlet Type
2
Stopper
2
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
1 Plug-in Type
3
16
[CHARGE] lamp
Charging: Lights red
Charging Complete: Lights green
QUICK START GUIDE
To configure display language and clock settings
• Be sure to configure the following settings
before using the camera to record images.
See page 44 for details.
1. Press the power button to turn on the camera.
2. Press [왖] to select the language you want.
1
3. Press [SET] to register the language setting.
4. Use [왖], [왔], [왗], and [왘] to select the geographical
area you want, and then press [SET].
5. Use [왖] and [왔] to select the city you want, and then
press [SET].
6. Use [왖] and [왔] to select the summer time (DST)
2, 3, 4, 5, 6, 7, 8, 9
setting you want, and then press [SET].
7. Use [왖] and [왔] to select the date format setting you
want, and then press [SET].
8. Set the date and the time.
9. Press [SET] to register the clock settings and exit the
setting screen.
17
QUICK START GUIDE
Green
operation lamp
See page 48 for details.
1
7
2
3,4,5
6
10
Snapshot mode icon
1600 1200
NORMAL
IN
1 / 1000
F2.6
Focus frame
04/ 12/24
04/12
24
12:58
12
58
1. Press [
] (REC).
2. Press [MENU].
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
To record an image
3. Use [왗] and [왘] to select the “REC” tab.
4. Use [왖] and [왔] to select “REC Mode”, and then
press [왘].
5. Use [왖] and [왔] to select “
Snapshot”, and then
press [SET].
• This causes “
screen.
” (Snapshot mode) to appear on the monitor
6. Point the camera at the subject, use the monitor
screen or viewfinder to compose the image, and then
press the shutter button half way.
• When proper focus is achieved, the focus frame turns green
and the green operation lamp lights.
7. Holding the camera still, gently press the shutter
button all the way down.
18
QUICK START GUIDE
To view a recorded image
To delete an image
See page 108 for details.
See page 125 for details.
1
1
2, 3, 4, 5
2
1. Press [
] (PLAY).
2. Use [왗] and [왘] to scroll through the
images.
1. Press [
] (PLAY).
2. Press [왔] (
).
3. Use [왗] and [왘] to display the image you want to
delete.
4. Use [왖] and [왔] to select “Delete”.
• To exit the image delete operation without deleting anything,
select “Cancel”.
5. Press [SET] to delete the image.
19
GETTING READY
GETTING READY
This section contains information about things you need to
know about and do before trying to use the camera.
This term as used in this
manual:
Tiny flecks or “snow” in a
recorded image or on the
monitor screen, which makes
the image look grainy.
“a REC mode”
The currently selected
recording mode (Snapshot,
BESTSHOT, Movie, Voice
Recording, Audio Snapshot)
About This Manual
This section contains information about the conventions
used in this manual.
■ Terminology
The following table defines the terminology used in this
manual.
This term as used in this
manual:
Means this:
“digital noise”
■ Button Operations
Button operations are indicated by the button name inside
of brackets ([ ]).
Means this:
“camera”
The CASIO EX-Z50 Digital
Camera
“file memory”
The location where the
camera is currently storing
images you record (page 50)
“battery”
The NP-40 Rechargeable
Lithium Ion Battery
“charger”
The optionally available CASIO
BC-30L rapid charger
■ On-screen Text
On-screen text is always enclosed by double quotation
marks (“ ”).
■ Supplementary Information
•
IMPORTANT!
indicates very important
information you need to know in order to use the camera
correctly.
•
NOTE
indicates information that is useful when
operating the camera.
20
GETTING READY
■ File Memory
General Guide
The term “file memory” in this manual is a general term that
refers to the location where your camera is currently storing
the images you record. File memory can be any one of the
following three locations.
The following illustrations show the names of each
component, button, and switch on the camera.
Camera
• The camera’s built-in flash memory
• An SD memory card loaded in the camera
• A MultiMediaCard loaded in the camera
■ Front
12
For more information about how the camera stores images,
see page 172.
3
7
21
4 5
6
1 Shutter button
2 Power button
3 Flash
4 Microphone
5 Self-timer lamp
6 Viewfinder
7 Lens
GETTING READY
■ Back
■ Bottom
8 9
:A B
J Stopper
K Memory card slot
L Battery compartment
M Battery cover
N Connector
O Tripod screw hole
C
D
8 Viewfinder
9 Operation lamp
0 [ ] (PLAY mode)
* Use this hole when attaching to a tripod.
button
] (REC mode)
button
B [MENU] button
C Zoom button
D Strap ring
E [SET] button
F [][][][]
G [DISP] button
H Monitor Screen
I Speaker
A[
I
H
G F
E
J
K
O N
L
M
22
GETTING READY
■ Back
USB Cradle
Simply placing your CASIO digital camera onto the USB
cradle lets you perform the following tasks.
•
•
•
•
6 [DC IN 5.3V]
Battery charging (page 31)
Automatic transfer of images to a computer (page 160)
Direct connection to a printer for printing (page 156)
Viewing of images using the Photo Stand slideshow
feature (page 119).
(AC adaptor connector)
6
7
■ Front
1
23
5 4
1 Camera connector
2 [USB] lamp
3 [USB] button
4 [CHARGE] lamp
5 [PHOTO] button
23
7 [USB]
(USB port)
GETTING READY
Monitor Screen Contents
The monitor screen uses various indicators and icons to keep you informed of the camera’s status.
• Note that the example screens in this chapter are for illustrative purposes only. They do not exactly match the screen
contents actually produced on the camera.
■ REC Modes
1 2 34 5
6
1 Flash mode indicator
7
8
9
0
A
B
C
G
F
3 White balance indicator 5 REC modes (page 48)
(page 59)
(page 78)
None
None
Auto
Flash Off
Daylight
Flash On
Cloudy
Red-eye reduction
Shade
• If the camera detects that flash
is required while auto flash is
selected, the flash on indicator
will appear when the shutter
button is pressed half way.
1
Fluorescent 1
2
Fluorescent 2
Tungsten
2 Focus mode indicator
E
D
(page 68)
None
Auto
Manual
4 Self-timer (page 63)
Auto Focus
None
1-Image
Macro
Pan Focus
10s
Infinity
2s
Manual Focus
x3
24
Self-timer 10 sec
Self-timer 2 sec
Triple self-timer
Snapshot
BESTSHOT
Movie
Audio Snapshot
Voice Recording
6 Memory capacity
(pages 52, 91, 204)
(Remaining number of storable
images)
Movie Recording: Remaining
recording time
7 Image size (page 65)
2560 × 1920 pixels
2560 × 1712 (3:2) pixels
2048 × 1536 pixels
1600 × 1200 pixels
1280 × 960 pixels
640 × 480 pixels
Movie Recording: Recording
time
GETTING READY
8 Quality (page 66)
FINE
NORMAL
ECONOMY
9
Built-in memory selected
for data storage.
Memory card selected for
data storage.
(page 146)
0 Shutter speed value
(page 52)
• An out of range aperture or
shutter speed causes the
corresponding monitor screen
value to turn amber.
A Aperture value (page 52)
■ PLAY Mode
B ISO sensitivity
(page 100)
12
3
C Date and time
(page 139)
D EV value (page 76)
4
5
6
7
8
9
0
F
E Battery capacity
(page 35)
E
F Histogram (page 97)
G Focus frame
(page 51)
D
• Focusing complete: Green
• Focusing failed: Red
CBA
1 PLAY mode file type
4 Image size (page 65)
2560 × 1920 pixels
2560 × 1712 (3:2) pixels
2048 × 1536 pixels
1600 × 1200 pixels
1280 × 960 pixels
640 × 480 pixels
Movie Playback: Elapsed play
time
(page 108)
NOTE
Snapshot
Movie
• Changing the setting of any one of the following
functions will cause Icon Help (page 103) text to
appear on the monitor screen. You can turn off Icon
Help if you want (page 103).
Flash mode, Focus mode, White balance, Self-timer,
REC mode
Audio Snapshot
Voice Recording
2 Image protection
indicator (page 128)
5 Quality (page 66)
FINE
NORMAL
ECONOMY
3 Folder number/File
number (page 127)
Example : When a file named
CIMG0023.JPG is stored in a
folder named 100CASIO
100-0023
Folder name
25
File name
6
Built-in memory selected
for data storage.
Memory card selected for
data storage.
(page 146)
GETTING READY
7 Shutter speed value
8 Aperture value
9 ISO sensitivity
(page 100)
0 Date and time
(page 139)
A White balance indicator
(page 78)
AWB
Auto
Daylight
B Flash mode indicator
Flash On
Red-eye reduction
Snapshot
BESTSHOT
D Battery capacity
(page 35)
E Histogram (page 97)
F EV value (page 76)
2
Fluorescent 2
■ REC Modes
C REC modes (page 48)
Shade
Fluorescent 1
Each press of the [DISP] button changes the contents of
the monitor screen as shown below.
Flash Off
Cloudy
1
Changing the Contents of the Monitor
Screen
(page 59)
Indicators on
Histogram on
Monitor screen off
Indicators off
Tungsten
Manual
IMPORTANT!
• Some information may not display properly if you
display an image that was recorded using a different
digital camera model.
26
GETTING READY
■ PLAY Mode
IMPORTANT!
Indicators on
• You cannot turn off the monitor screen in the
following cases: In the PLAY mode, in the
BESTSHOT mode, when not recording in the Movie
mode.
• Pressing [DISP] will not change monitor screen
contents during movie recording, or during standby
or recording of an audio snapshot.
• Pressing [DISP] in the Voice Recording REC mode
toggles the monitor screen on (“indicators on”) and
off. While a Voice Recording file is displayed in the
PLAY mode, pressing [DISP] toggles between
“indicators on” and “indicators off”.
• When playing back the contents of a Voice
Recording file while "indicators off" is selected (Voice
Recording file icon only on the monitor screen), the
monitor screen will go black about two seconds after
you press [SET] to start playback. The Voice
Recording file icon (indicators off) will reappear after
playback is complete.
Histogram/Details on
Indicators off
27
GETTING READY
IMPORTANT!
Attaching the Strap
• Be sure to keep the strap around your wrist when
using the camera to protect against accidentally
dropping it.
• The supplied strap is intended for use with this
camera only. Do not use it for any other purpose.
• Never swing the camera around by the strap.
Attach the strap to the strap ring as shown in the
illustration.
Strap ring
28
GETTING READY
2. While pulling the stopper in the direction
Power Requirements
indicated by the arrow in the illustration, align
the (–) mark on the battery with the (–) mark
on the camera and slide the battery into the
camera.
Your camera is powered by a rechargeable lithium ion
battery (NP-40).
Loading and Removing the
Rechargeable Battery
Stopper
■ To load the battery
1. Slide the battery cover in the direction
indicated by the arrow, and then swing it
open.
(–) marks
(–) mark
NP-40
• Push the bottom of the battery, and make sure that
the stopper securely locks the battery in place.
29
GETTING READY
■ To remove the battery
3. Swing the battery cover closed, and then slide
it in the direction indicated by the arrow.
1. Open the battery cover.
2. Pull the stopper in the direction indicated by
the arrow.
• This will cause the battery to come part way out of
the slot.
Stopper
IMPORTANT!
• Use only the special NP-40 rechargeable lithium ion
battery to power this camera. Use of any other type
of battery is not supported.
The battery is not charged when you purchase the
camera. You need to charge the battery before using
the camera for the first time (page 31).
3. Release the stopper and pull the battery from
the camera.
• Take care so you do not drop the battery.
30
GETTING READY
NOTE
To charge the battery
• The bundled AC adaptor is designed for operation
with any power supply in the range of 100V to 240V
AC. Note, however, that the shape of the AC power
cord plug varies according to country or geographic
area. If you plan to use the AC adaptor in a
geographic area where the power receptacle shape
is different from that in your area, replace the AC
power cord with one of the other ones that comes
with the camera, or purchase a commercially
available AC power cord that is compatible with the
power outlets in that area.
1. Connect the bundled AC adaptor to the [DC IN
5.3V] connector of the USB cradle, and then
plug it in to a household power outlet.
• Note that the shape of the AC adaptor depends on
the area where you purchased the camera.
USB Cradle
[DC IN 5.3V]
AC Adaptor
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
AC Adaptor
USB Cradle
[DC IN 5.3V]
AC power cord
31
GETTING READY
4. After charging is complete, remove the
NOTE
camera from the USB cradle.
• The AC adaptor is designed for operation on power
ranging from 100V AC to 240V AC. Note, however,
that the shape of the power cord plug varies
according to country or geographic area. It is up to
you to find out if the shape of the AC adaptor power
cord plug is compatible with local power outlets when
traveling abroad.
IMPORTANT!
• Use only the USB cradle (CA-24) that comes with the
camera or the optionally available rapid charger (BC30L) to charge the special NP-40 rechargeable
lithium ion battery. Never use any other charging
device.
• Use only the bundled AC adaptor. Never use any
other type of AC adaptor. Do not use optionally
available AD-C40, AD-C620 and AD-C630 AC
adaptors with this camera.
• Make sure that the camera connector of the USB
cradle is securely inserted into the camera’s
connector as far as it will go.
2. Turn off the camera.
3. Set the camera onto
the USB cradle.
• Do not place the
camera onto the USB
cradle while it is turned
on.
• The [CHARGE] lamp
on the USB cradle
should turn red,
indicating that charging
has started. When
charging is complete,
the [CHARGE] lamp
will turn green.
[CHARGE] lamp
• It takes about 190 minutes to achieve a full charge.
Actual charging time depends on current battery
capacity and charging conditions.
32
GETTING READY
■ If the camera does not work normally
• The [CHARGE] lamp may remain amber colored and
the charge operation may not start right away if you
try to charge immediately after using the camera
(which causes battery to become warm) or when it is
too hot or too cold where you are performing the
charge operation. If this happens, simply wait until
the battery reaches normal temperature. The
[CHARGE] lamp will turn red and charging will start
when the battery temperature returns to the
allowable charging temperature range.
• If the [CHARGE] lamp starts flashing red, it means
that an error occurs while charging. An error can be
caused by any of the following: a problem with the
USB cradle, a problem with the camera, or a problem
with the battery or how it is loaded. Remove the
camera from the USB cradle and see if it works
normally.
• The following are the only operations that can be
performed while the camera is on the USB cradle:
charging of the camera’s battery, exchanging data
with a computer over a USB connection, and Photo
Stand operation.
This can mean there is a problem with how the battery is
loaded. Perform the following steps.
1. Remove the battery from the camera and
check the battery contacts for dirt. If the
contacts are dirty, wipe them clean with a dry
cloth.
2. Check to make sure that the AC adaptor’s
power cord is connected securely to the
power outlet and USB cradle.
• If the same symptoms occur again when you place
the camera on the USB cradle after taking the above
steps, contact a CASIO authorized service center.
33
GETTING READY
■ Battery Life Guidelines
Supported Battery: NP-40 (Rated Capacitance: 1230mAh)
Storage Medium: SD Memory Card
The battery life guideline values given below indicate the
amount of time under the conditions defined below the
table, until power automatically turns off due to battery
failure. They do not guarantee that the battery will provide
the amount of service indicated. Low temperatures and
continued use reduce battery life.
Operation
Apporoximate Battery Life
Number of Shots (CIPA
Standard)*1 (Operating Time)
390 shots (195 minutes)
Number of Shots, Continuous
Recording*2 (Operating Time)
970 shots (190 minutes)
Continuous Snapshot Playback*3
4
Continuous Voice Recording*
*1 Number of Shots (CIPA Standard)
• Temperature: 23°C (73°F)
• Monitor Screen: On
• Zoom operation between full wide to full telephoto
every 30 seconds, during which two images are
recorded, one image with flash; power turned off and
back on every time 10 images are recorded.
*2 Continuous Recording Conditions
• Temperature: 23°C (73°F)
• Monitor screen: On
• Flash: Off
• Image recorded every 12 seconds, alternating full
wide-angle and full telephoto zoom
380 minutes
350 minutes
*3 Continuous Snapshot Playback Conditions
• Temperature: 23°C (73°F)
• Scroll one image about every 10 seconds
*4 Voice recording times are based on continuous
recording.
34
GETTING READY
■ Low Battery Indicator
• The above values are based on a new battery starting
from a full charge. Repeated charging shortens battery
life.
• Battery life is greatly affected by how much you use flash,
zoom and other functions, and how long you leave power
turned on.
The following shows how the battery capacity indicator on
the monitor screen changes as battery power is used. The
indicator means that remaining battery power is low.
Note that you will not be able to record images while the
battery indicator is
. Charge the battery immediately
whenever either of these indicators appears.
■ Tips to Make the Battery Last Longer
• If you do not need the flash while recording, select
(flash off) for the flash mode. See page 59 for more
information.
• Enable the Auto Power Off and the Sleep features (page
41) to protect against wasting battery power when you
forget to turn off the camera.
• You can also conserve battery power by using the [DISP]
button to turn off the monitor screen.
Battery Level
Indicator
35
High
Low
GETTING READY
• Failure to observe any of the following precautions
while using the battery creates the risk of overheating,
fire, and explosion.
— Never use any other type of charger except the
optional charger specified for the battery.
— Never try to use the battery to power any device
other than this camera.
— Never use or leave the battery near open flame.
— Never place the battery in a microwave oven, throw
it into fire, or otherwise expose it to intense heat.
— Make sure the battery is oriented correctly when you
load it into the camera or attach it to the optional
charger.
— Never carry or store the battery together with items
that can conduct electricity (necklaces, pencil lead,
etc.)
— Never try to take the battery apart, modify it in any
way, or expose it to strong impact.
— Do not immerse the battery in fresh water or salt
water.
— Do not use or leave the battery under direct
sunlight, in an automobile parked in the sun, or in
any other area subject to high temperatures.
Power Supply Precautions
Note the following precautions when handling or using the
battery and the optional charger.
■ Battery Handling Precautions
● SAFETY PRECAUTIONS
Be sure to read the following Safety Precautions before
using the battery for the first time. Keep these safety
precautions and all operating instructions on hand for
future reference.
NOTE
• The term “battery” in this manual refers to the CASIO
NP-40 Rechargeable Lithium Ion Battery.
• Use only the USB cradle (CA-24) that comes with the
camera or the optionally available rapid charger (BC30L) to charge the special NP-40 rechargeable
lithium ion battery. Never use any other charging
device.
36
GETTING READY
• Should fluid from the battery accidentally get onto
clothing or your skin, immediately rinse it off with clean
tap water. Prolonged contact with battery fluid can
cause skin irritation.
• Should you ever notice any of the following conditions
while using, charging, or storing a battery, immediately
remove it from the camera or charger, and keep it away
from open flame:
— Fluid leaking
— Emission of a strange odor
— Heat emission
— Battery discoloration
— Battery deformation
— Any other battery abnormality
• If the battery does not achieve full charge after the
normal charging time has passed, stop charging.
Continued charging creates the risk of overheating, fire,
and explosion.
• Battery fluid can damage your eyes. Should battery
fluid get into your eyes accidentally, immediately rinse
them with clean tap water and then consult a physician.
• Be sure to read page 31 of this User’s Guide and the
instructions that come with the optional charger before
using or charging the battery.
• If the battery is to be used by young children, make
sure that a responsible adult makes them aware of the
precautions and proper handling instructions and make
sure that they handle the battery correctly.
● PRECAUTIONS DURING USE
• The battery is designed for use with this CASIO digital
camera only.
• Use only the USB cradle that comes with the camera or
the specified optional charger to charge the battery.
Never use any other type of charger for charging.
• Use of a battery in cold environments shortens the
operating time you can expect on a full charge. Charge
the battery in a location where the temperature is in the
range of 10°C to 35°C (50°F to 95°F). Charging
outside this temperature range can cause charging to
take longer than normal or even cause charging to fail.
• Very limited operation following a full charge indicates
that the battery has reached the end of its service life.
Replace the battery with a new one.
• Never wipe the battery with thinner, benzene, alcohol,
or other volatile agents or chemically treated rags.
Doing so can cause deformation of the battery and lead
to malfunction.
37
GETTING READY
■ USB Cradle and AC Adaptor Precautions
● BATTERY STORAGE PRECAUTIONS
• Make sure you remove the battery from the camera
when you do not plan to use it for a long time. A battery
left in the camera discharges very small amounts of
power even when power is turned off, which can lead to
a dead battery or the need for longer charging before
the next use.
• Store the battery in a cool, dry place (20°C (68 °F) or
lower).
● USING THE BATTERY
• See page 31 of this manual or the instructions that
come with the optional charger for information about
charging procedures and charging times.
• When transporting a battery, keep it either loaded in
the camera or stored in its case.
Caution!
38
• Never use an electrical outlet whose voltage
is outside the rating marked on the AC
adaptor. Doing so can create the risk of fire or
electric shock. Use only the AC adaptor
bundled with this camera.
• Do not allow the AC adaptor cord to become
cut or damaged, do not place heavy objects
on it, and keep it away from heat. A damaged
power cord creates the risk of fire and electric
shock.
• Never try to modify the AC adaptor cord, or
subject it to severe bending, twisting, or
pulling. Doing so creates the risk of fire and
electric shock.
• Never touch the AC adaptor while your hands
are wet. Doing so creates the risk of electric
shock.
• Do not overload extension cords or wall
outlets. Doing so creates the risk of fire and
electric shock.
• Should the cord of the AC adaptor become
damaged (exposed internal wiring), request a
replacement from a CASIO authorized service
center. A damaged AC adaptor cord creates
the risk of fire or electric shock.
GETTING READY
Caution!
• Use the AC adaptor where it will not be
splashed with water. Water creates the risk of
fire and electric shock.
• Do not place a vase or any other container
filled with liquid on top of the AC adaptor.
Water creates the risk of fire and electric
shock.
Turning the Camera On and Off
■ To turn on the camera
Press the power button, [
] (REC), or [
] (PLAY). This
will cause the green operation lamp to light momentarily,
and then power will turn on. The mode the camera enters
depends on which button you pressed to turn it on.
• Make sure you always remove the camera from the USB
cradle before connecting or disconnecting the AC
adaptor.
• Charging, USB data communication, and using the Photo
Stand feature can cause the AC adaptor to become
warm. This is normal and does not indicate malfunction.
• Unplug the AC power cord from the power outlet
whenever you are not using it.
• Never place a blanket or any other cover on the AC
adaptor. Doing so creates the risk of fire.
To enter this mode at
startup:
Press this button to turn on the camera:
REC
Power button or [
PLAY
[
] (REC)
] (PLAY)
Green operation lamp
Power button
39
[
] (PLAY)
[
] (REC)
GETTING READY
■ To turn off the camera
NOTE
• Pressing [
] (REC) to turn on the camera enters
the REC mode, while pressing [
] (PLAY) enters
the PLAY mode.
• Pressing [
] (PLAY) while in a REC mode switches
to the PLAY mode. The lens retracts about 10
seconds after switching modes.
Press the power button to turn off the camera.
NOTE
• You can setup the camera so it does not turn on
when you press [
] (REC) or [
] (PLAY), or to
turn off when you press [
] (REC) or [
] (PLAY).
For details, see “Configuring [
] (REC) and [
]
(PLAY) Power On/Off Functions” on page 144.
IMPORTANT!
• If camera power is turned off by the Auto Power Off
feature, press the power button, [
] (REC) or [
]
(PLAY) to turn it back on again.
• Pressing the power button or [
] (REC) to turn on
the camera also causes the lens to extend. Take
care to avoid any interference with the lens operation
or allowing anything to strike the lens when it is
extended.
40
GETTING READY
● See “Using the On-screen Menus” (page 42) for
information about how to use menus.
Configuring Power Saving Settings
You can configure the settings described below to
conserve battery power.
Sleep
: Automatically turns off the monitor screen
if no operation is performed for a specified
amount of time in a REC mode.
Performing any button operation causes
the monitor screen to turn back on.
Auto Power Off : Turns off power if you do not perform any
operation for a specified amount of time.
To configure this feature:
Select this setting:
Sleep
Sleep
Auto Power Off
Auto Power Off
5. Use [] and [] to change the currently
selected setting, and then press [SET].
• Available Sleep settings are: “30 sec”, “1 min”, “2 min”,
and “Off”.
1. Turn on the camera.
• Available Auto Power Off settings are: “2 min” and
“5 min”.
2. Press [MENU].
• Note that the Sleep feature does not operate in the
PLAY mode.
3. Use [] and [] to select the “Set Up” tab.
• Pressing any button while the camera is in the Sleep
state immediately turns the monitor screen back on.
4. Use [] and [] to select the feature whose
• The Auto Power Off and Sleep features are disabled
in the following cases.
setting you want to configure, and then press
[].
— When the camera is connected to a computer or
some other device through the USB cradle
— While a slideshow is in progress
— While playing back a voice recording file
— While playing back a movie
41
GETTING READY
2. Press [MENU].
Using the On-screen Menus
Tab
Pressing [MENU] displays menus on the monitor screen
that you can use to perform various operations. The menu
that appears depends on whether you are in a REC mode
or the PLAY mode. The following shows an example menu
procedure in a REC mode.
1. Press the power
button or [
Selection cursor (indicates
the currently selected item)
[MENU]
[SET]
Power button
] (REC).
• If you want to enter the
PLAY mode instead,
press [
] (PLAY).
[][ ][][ ]
[
][
]
42
Settings
GETTING READY
● Menu Screen Operations
3. Press [] or [] to select the tab you want,
When you want to do this:
Do this:
Move between tabs
Press [] and [].
Move from the tab to the
settings
Press [].
Move from the settings to
the tab
Press [].
Move between the settings
Press [] and [].
Display the options
available for a setting
Press [] or press [SET].
Select an option
Press [] and [].
Apply the setting and exit
the menu screen
Press [SET].
Apply the setting and
return to tab selection
Press [].
Exit the menu screen
Press [MENU].
and then press [SET] to move the selection
cursor from the tab to the settings.
4. Use [] and [] to
select the feature
whose setting you
want to configure,
and then press [].
• Instead of pressing [],
you could also press
[SET].
Example: To select the
“REC Mode”
item.
5. Use [] and [] to change the currently
selected setting.
43
GETTING READY
6. Perform one of the following operations to
Configuring Display Language and Clock
Settings
apply the setting you configured.
To do this:
Perform this key operation:
Apply the setting and exit
the menu screen.
Press [SET].
Apply the setting and
return to feature selection
in step 4.
Press [].
Apply the setting and
return to tab selection in
step 3.
1. Press [].
2. Use [] to move back up to
tab selection.
Be sure to configure the following settings before using the
camera to record images.
•
•
•
•
Display language
Home city
Date Style
Date and time
Note that the current date and time settings are used by
the camera to generate the date and time that are stored
along with image data, etc.
• See “Menu Reference” on page 192 for more information
about menus.
44
GETTING READY
IMPORTANT!
To configure display language and clock
settings
• Recording images without configuring the clock
settings causes incorrect time information to be
registered. Be sure to configure the clock settings
before using the camera.
• A built-in backup battery retains the date and time
settings of the camera for about two days if the
camera is not supplied with power. Date and time
settings will be cleared when the backup battery
goes dead. The following are the conditions when
power is not being supplied to the camera.
— When the rechargeable battery is dead or
removed from the camera
— When power is not being supplied to the camera
from the cradle while the rechargeable battery is
dead or removed from the camera
• The date and time setting screen will appear on the
monitor screen the next time you turn on the camera
after the date and time settings have been cleared.
If this happens, reconfigure the date and time
settings.
• If you make a mistake when setting the language or
clock with the following procedure, you will need to
use the camera’s menu to individually change the
language (page 142) or clock (page 139) settings.
1. Press the power button, [
[
] (REC) or
] (PLAY) to turn on the camera.
2. Use [], [], [], and
[] to select the
language you want,
and then press [SET].
: Japanese
English
: English
Français : French
Deutsch
: German
Español
: Spanish
Italiano
: Italian
Português : Portuguese
: Chinese (Complex)
: Chinese (Simplified)
: Korean
45
GETTING READY
3. Use [], [], [], and
6. Use [] and [] to
[] to select the
geographical area
where you live, and
then press [SET].
select the date format
setting you want, and
then press [SET].
Example: December 24, 2004
4. Use [] and [] to
select the name of the
city where you live,
and then press [SET].
5. Use [] and [] to select the summer time
(DST) setting you want, and then press [SET].
When you want to do this:
Select this setting:
Keep time using summer time
(Daylight Saving Time)
On
Keep time using standard time
Off
46
To display the date like this:
Select this format:
04/12/24
YY/MM/DD
24/12/04
DD/MM/YY
12/24/04
MM/DD/YY
GETTING READY
7. Set the current date
and the time.
To do this:
Do this:
Change the setting at the current
cursor location
Press [] and [].
Move the cursor between settings
Press [] and [].
Toggle between 12-hour and 24hour timekeeping
Press [DISP].
8. Press [SET] to register the settings and exit
the setting screen.
47
BASIC IMAGE RECORDING
BASIC IMAGE RECORDING
This section describes the basic procedure for recording an
image.
•
(Movie mode)
Use this mode to record movies with audio (page 91).
•
(Audio Snapshot mode)
Use this mode to add audio to a snapshot after recording
it (page 94).
•
(Voice Recording mode)
Use this mode to record audio only (page 95).
Recording an Image
Specifying the Recording Mode
Your CASIO digital camera has five recording modes, each
of which is described below. Before recording an image,
use the procedure below to select the applicable recording
mode.
1. Press the power button or [
] (REC).
2. Press [MENU], and use [왗] and [왘] to select
•
(Snapshot mode)
Use this mode to record still images. This is the mode you
should normally use for image recording (page 50).
•
(BESTSHOT mode)
This mode makes camera setup as easy as selecting the
applicable sample scene. Simply select one of 23 sample
scenes, and the camera will automatically be configured
with the settings required to record a similar image (page
81).
the “REC” tab.
3. Use [왖] and [왔] to
select “REC Mode”,
and then press [왘].
48
BASIC IMAGE RECORDING
4. Use [왖] and [왔] to
select the recording
mode you want, and
then press [SET].
• The icon (like “
”) for
the mode you select is
displayed on the monitor
screen.
Recording mode icon
Aiming the Camera
Use both hands to hold the camera still when shooting an
image. Holding the camera with one hand increases the
chance of movement, which can blur your images.
10
1600 1200
NORMAL
IN
• Horizontal
Hold the camera
still in both
hands, with your
arms firmly
against your
sides.
• Vertical
When holding
the camera
vertically, make
sure that the
flash is above
the lens. Hold
the camera still
with both hands.
04/ 12/24
04/12
24
12 : 58
49
BASIC IMAGE RECORDING
IMPORTANT!
Recording an Image
• Make sure your fingers and the strap do not block
the flash, microphone or lens.
Your camera automatically adjusts shutter speed in
accordance with the brightness of the subject. Images you
record are stored in the camera’s built-in memory, or to a
memory card if you have one loaded in the camera.
• When an optionally available SD memory card or
MultiMediaCard (MMC) is loaded in the camera, images
are stored on the card (page 146).
Flash
Microphone
Lens
1. Press the power button or [
] (REC) to turn
on the camera.
NOTE
[
• Your image will be blurred if you move the camera
when pressing the shutter button. Press the shutter
button carefully, taking care to avoid camera
movement. This is especially important when
available lighting is low, which slows down the
shutter speed.
N/OFF
Power button
50
]
BASIC IMAGE RECORDING
3. Compose the image on the monitor screen so
• This causes an image or a message to appear on
the monitor screen, and then enters the currently
selected recording mode.
the main subject is within the focus frame.
• The focusing range of the camera depends on focus
mode you are using (page 68).
• If the camera is in the PLAY mode when it turns on,
the message “There are no files” will appear if you do
not have any images stored in memory yet. In
addition, the
icon will be visible at the top of the
display. If this happens, press [
] (REC) to enter
the currently selected recording mode.
2. Change the “REC
Mode” setting to “
Snapshot”.
• The
(Snapshot
mode) icon is displayed
on the monitor screen
while the Snapshot
mode is selected.
• You can also use the
key customization
feature to assign the
mode change operation
to the cursor keys, so
the “REC Mode” setting
is changed whenever
you press the [왗] or [왘]
key (page 104).
• You can compose images using either the monitor
screen or the optical viewfinder (page 54).
• When using the optical viewfinder to compose
images, you can use the [DISP] button to turn off the
monitor screen and conserve battery power.
Snapshot mode icon
4. Press the shutter button half
way to focus the image.
10
1600 1200
NORMAL
• When you press the shutter
button half way, the camera’s
Auto Focus feature automatically
focuses the image, and displays
Shutter button
the shutter speed and aperture
values.
Green operation lamp
• You can tell whether the
image is focused by
observing the focus frame
and the green operation
lamp.
IN
04/ 12/24
04/12
24
12:58
12
58
Focus frame
51
BASIC IMAGE RECORDING
● Operation Lamp and Focus Frame Operation
When you see this:
It means this:
Green focus frame
Green operation lamp
The image is in focus.
Red focus frame
Flashing green operation lamp
The image is not in focus.
5. After making sure that the
image is focused properly,
press the shutter button the
rest of the way down to
record.
• The monitor screen uses various indicators and
icons to keep you informed of the camera’s status.
Shutter button
• The number of images you can
record depends on the image
size and the image quality setting
you are using (pages 65, 66, 204).
White balance
Focus mode
Self-timer
IMPORTANT!
Flash mode
Memory capacity
• Auto Pan Focus is enabled when the “REC” tab’s
“Auto PF” setting is turned on (page 69). With Auto
Pan Focus the shutter releases without waiting for
Auto Focus to be performed and the image is
recorded as soon as you press the shutter button all
the way down. This helps to ensure that you are able
to capture exactly the moment you want.
Image size
Image quality
Memory type
Shutter speed value
Aperture value
ISO sensitivity
Date and time
52
BASIC IMAGE RECORDING
■ Recording Precautions
■ About Auto Focus
• Never open the battery cover or place the camera onto
the USB cradle while the green operation lamp is
flashing. Doing so not only causes the current image to
be lost, it can also corrupt images already stored in file
memory and even lead to malfunction of the camera.
• Never remove the memory card while an image is being
recorded to the memory card.
• Fluorescent lighting actually flickers at a frequency that
cannot be detected by the human eye. When using the
camera indoors under such lighting, you may experience
some brightness or color problems with recorded images.
• When “Auto” is selected for the ISO sensitivity setting
(page 100), the camera automatically adjusts its
sensitivity in accordance with the brightness of the
subject. This can cause some digital noise (graininess) to
appear in images of relatively dark subjects.
• When recording a dimly lit subject while “Auto” is selected
for the ISO sensitivity setting (page 100), the camera
increases sensitivity and uses a slower shutter speed.
Because of this, you need to guard against camera
movement if you have flash turned off
(page 59).
• Bright light shining on the lens can cause images to
appear “washed out”. This tends to happen when
recording images outdoors in bright sunlight. To protect
against this, use your free hand to shade the lens from
the light.
• Auto Focus tends not to work well if the camera is moved
during recording, or when recording the types of subjects
listed below.
— Solid color walls or subjects with little contrast
— Strongly backlit subjects
— Polished metal or other brightly reflective subjects
— Venetian blinds or other horizontally repeating patterns
— Multiple subjects that are varying distances from the
camera
— Subjects in poorly lit areas
— Moving subjects
• Note that a green operation lamp and focus frame do not
necessarily guarantee that the resulting image will be in
focus.
• If Auto Focus does not produce the results you want for
some reason, try using focus lock (page 75) or manual
focus (page 74).
53
BASIC IMAGE RECORDING
■ About the REC Mode Monitor Screen
Using the Optical Viewfinder
• The image shown on the monitor screen in a REC mode
is a simplified image for composing purposes. The actual
image is recorded in accordance with the image quality
setting currently selected on your camera. The image
saved in file memory has much better resolution and
detail than the REC mode monitor screen image.
• Certain levels of subject brightness can cause the
response of the REC mode monitor screen to slow down,
which causes some digital noise (graininess) in the
monitor screen image.
• Very bright light inside of an image can cause a vertical
band to appear in the monitor screen image. This is a
CCD phenomenon known as “vertical smear”, and does
not indicate malfunction of the camera. Note that vertical
smear is not recorded with the image in the case of a
snapshot, but it is recorded in the case of a movie (page
91).
You can conserve battery power by turning off the
camera’s monitor screen (page 26) and using the optical
viewfinder to compose images. The optical viewfinder also
comes in handy when shooting in areas where the monitor
screen is difficult to view because available lighting is dim,
etc.
IMPORTANT!
• The visible area framed by the viewfinder shows the
image that would be recorded at a distance of about
one meter (3.3´). When recording a subject that is
closer to you than one meter, the recorded image will
be lower than what you can see inside the viewfinder
area.
Optical viewfinder
Area recorded at
distances less than
one meter (3.3´)
54
Area visible in
the viewfinder
BASIC IMAGE RECORDING
• Since the monitor screen shows exactly what will be
recorded, always use it for composing images in the
Macro and Manual Focus modes.
Using Zoom
Your camera is equipped with two types of zoom: optical
zoom and digital zoom. Normally, the camera automatically
switches over to digital zoom after you reach the maximum
limit for optical zoom. You can, however, configure the
camera to disable digital zoom, if you want.
Optical Zoom
The optical zoom range is 1X to 3X.
1. In a REC mode, press the
zoom button to change
the zoom factor.
Zoom button
To do this:
55
Press this side of the zoom button:
Zoom out
(Wide Angle)
Zoom in
(Telephoto)
BASIC IMAGE RECORDING
NOTE
Zoom out
• The optical zoom factor also affects the lens
aperture.
• Use of a tripod is recommended to protect against
hand movement when using the telephoto setting
(zoom in).
• You can change the digital zoom setting during
movie recording, but not the optical zoom setting.
Make sure you select the optical zoom setting you
want to use before you press the shutter button to
start movie recording.
• Whenever you perform an optical zoom operation
while recording with the Macro mode or manual
focus, a value will appear on the monitor screen to
tell you the focusing range (pages 71, 74).
Zoom in
2. Compose the image, and then press the
shutter button.
56
BASIC IMAGE RECORDING
Digital Zoom
■ To record an image using digital zoom
Digital zoom digitally enlarges the part of the image at the
center of the image screen. The range of digital zoom is 3X
to 12X (in combination with optical zoom).
1. In a REC mode, hold
Digital zoom indicator
down the telephoto
( ) side of the zoom
button.
IMPORTANT!
• This causes the zoom
indicator to appear on the
display.
• Digital zoom is disabled whenever the monitor
screen is turned off (page 26).
• When you perform a digital zoom operation, the
camera manipulates the image data to enlarge the
center of the image. Unlike optical zoom, an image
enlarged with digital zoom appears coarser than the
original.
Zoom level indicator
2. When the zoom pointer reaches the optical/
digital zoom switch over point, it will stop.
Digital
Zoom range
Optical Zoom range
1X
3X
12X
Zoom pointer
Optical/digital zoom switch over point
• The above shows what the zoom indicator looks like
when digital zoom is turned on (page 58). The digital
zoom range is not displayed when digital zoom is
turned off.
57
BASIC IMAGE RECORDING
■ To turn digital zoom on and off
3. Release the zoom button momentarily, and
then hold down its telephoto ( ) side again
to move the zoom pointer into the digital
zoom range.
1. In a REC mode, press [MENU].
• The zoom pointer will also stop when you move the
pointer back to the switch over point to re-enter the
digital zoom range. Release the zoom button and
) side again to
then hold down its wide angle (
move into the digital zoom range.
3. Use [왖] and [왔] to select “Digital Zoom”, and
2. Use [왗] and [왘] to select the “REC” tab.
then press [왘].
4. Use [왖] and [왔] to select the setting you
4. Compose the image, and then press the
want, and then press [SET].
shutter button.
To do this:
Select this setting:
Turn on digital zoom
On
Turn off digital zoom
Off
• Only the optical zoom range is displayed in the zoom
level indicator when digital zoom is turned off.
58
BASIC IMAGE RECORDING
To do this:
Using the Flash
Have the flash fire automatically when
required (Auto Flash)
Perform the following steps to select the flash mode you
want to use.
• The approximate effective range of the flash is shown
below.
Wide Angle : Approximately 0.4 to 2.6 meters (1.3´ to
8.5´)(ISO Sensitivity: Auto)
Telephoto : Approximately 0.4 to 2.0 meters (1.3´ to
6.6´)(ISO Sensitivity: Auto)
Always fire the flash (Flash On)
Fire a pre-flash followed by image
recording with flash, reducing the
chance of red-eye in the image (Redeye reduction)
In this case, the flash fires automatically
when required
) to select the flash mode.
3. Record the image.
• Each press of [왔] (
) cycles through the flash
mode settings described below on the monitor
screen.
IMPORTANT!
• The flash unit of this camera fires a number of times
when you record an image. The initial flashes are
pre-flashes, which the camera uses to obtain
information that it uses for exposure settings. The
final flash is for recording. Make sure that you keep
the camera still until the shutter releases.
Flash mode indicator
[ 왔] (
None
Turn off the flash (Flash Off)
1. In a REC mode, press [MENU].
2. Press [왔] (
Select this setting:
)
59
BASIC IMAGE RECORDING
■ About Red-eye Reduction
Flash Unit Status
Using the flash to record at night or in a dimly lit room can
cause red spots inside the eyes of people who are in the
image. This happens because the light from the flash
reflects off of the retina of the eye. When red-eye reduction
is selected as the flash mode, the camera performs two
pre-flash operations, one designed to cause the irises in
the eyes of any people in the image to close, and one for
the Auto Focus operation. This is followed by another flash
operation for actual recording of the image.
You can find out the current flash unit status by pressing
the shutter button half way and checking the monitor
screen and red operation lamp.
The
indicator is also
shown on the monitor
screen when the flash unit
is ready to fire.
IMPORTANT!
Note the following important points when using redeye reduction.
• Red-eye reduction does not work unless the people
in the image are looking directly at the camera during
the pre-flash. Before pressing the shutter button, call
out to the subjects so they all look at the camera
while the pre-flash operation is performed.
• Red-eye reduction may not work very well if the
subjects are located far away from the camera.
Red operation lamp*
* Red operation lamp
60
When the red operation
lamp is this:
It means this:
Flashing
Flash unit is charging
Lit
Flash unit is ready to fire
BASIC IMAGE RECORDING
Changing the Flash Intensity Setting
Using Flash Assist
Perform the following steps to change the flash intensity
setting.
Recording a subject that is outside the flash range can
cause the subject to appear dark in the resulting image,
because not enough of the flash reaches the subject. When
this happens, you can use flash assist to correct the
brightness of the recorded subject, so it appears as if the
flash illumination was sufficient.
1. In a REC mode, press [MENU].
2. Use [왗] and [왘] to select the “REC” tab.
3. Use [왖] and [왔] to select “Flash Intensity”,
and then press [왘].
4. Use [왖] and [왔] to select the setting you
disp
disp
Flash assist used
Flash assist not used
want, and then press [SET].
To make flash intensity:
Select this setting:
Stronger
+2
+1
Normal
1. In a REC mode, press [MENU].
0
–1
Weaker
2. Use [왗] and [왘] to select the “REC” tab.
–2
3. Use [왖] and [왔] to select “Flash Assist”, and
IMPORTANT!
then press [왘].
• Flash intensity may not change if the subject is too
far or too close to the camera.
61
BASIC IMAGE RECORDING
■ Flash Precautions
4. Use [왖] and [왔] to select “Auto”, and then
press [SET].
Flash
• Take care that your fingers
do not block the flash when
you hold the camera.
Covering the flash with your
finger can greatly reduce its
effectiveness.
• Selecting “Off” disables flash assist.
IMPORTANT!
• Flash assist may not produce the desired result for
some types of subjects.
• Flash assist may have little effect on your image if
you changed any of the following settings when you
recorded it.
— Flash intensity (page 61)
— Exposure compensation (EV shift) (page 76)
— ISO sensitivity (page 100)
— Contrast (page 102)
• You may not be able to achieve the desired results using
the flash if the subject is too close or too far away.
• The flash takes anywhere from a few seconds to as long
as 10 seconds to attain full charge after being fired. The
actual time required depends on the battery level,
temperature, and other conditions.
• The flash does not fire in the Movie mode. This is
indicated by
(Flash Off) on the monitor screen.
• The flash unit may not be able to charge when battery
power is low. Low battery power is indicated by
(Flash
Off) on the monitor screen, and when the flash fails to fire
properly resulting in poor image exposure. When these
symptoms occur, charge the camera’s battery as soon as
possible.
• When the flash is turned off (
), mount the camera on a
tripod to record images in an area where available lighting
is dim. Recording images under dim lighting without the
flash can cause digital noise, which makes images
appear coarse.
62
BASIC IMAGE RECORDING
• When red-eye reduction (
) is selected, flash intensity
is adjusted automatically in accordance with the
exposure. The flash may not fire at all when the subject is
brightly lit.
• Using flash in combination with another light source
(daylight, fluorescent light, etc.) can result in abnormal
image colors.
Using the Self-timer
The self-timer lets you select either a 2-second or 10second delay of the shutter release after you press the
shutter button. A Triple Self-timer feature lets you perform
three consecutive self-timer operations to record three
images.
1. In a REC mode, press [MENU].
2. Use [왗] and [왘] to select the “REC” tab.
3. Use [왖] and [왔] to select “Self-timer”, and
then press [왘].
4. Use [왖] and [왔] to select the self-timer type
you want to use, and then press [SET].
• Selecting “Off” in step 4 disables the self-timer.
63
BASIC IMAGE RECORDING
To do this:
Specify a 10-second self-timer
Specify a 2-second self-timer
Specify Triple Self-timer
Disable the self-timer
2. The camera prepares to record the next image.
The amount of time required for preparation
depends on the camera’s current “Size” and
“Quality” settings, the type of memory (built-in or
card) you are using for image storage, and
whether or not the flash is charging.
Select this setting:
10s
2s
x3
10 sec
2 sec
X3
3. After preparation is complete, the indicator “1sec”
appears on the monitor screen, and another
image is recorded one second later.
Off
• This causes an
indicator identifying the
selected self-timer type
to appear on the
monitor screen.
4. Steps 2 and 3 are repeated once more to record
the third image.
5. Record the image.
Self-timer lamp
• When you press the
shutter button, the selftimer lamp flashes as
the countdown
progresses, and then
the shutter releases
after the self-timer
reaches the end of its
countdown.
• With the Triple Self-timer,
the camera records a
series of three images in
the sequence described
below.
1. The camera performs a 10-second countdown
and then records the first image.
• You can interrupt an ongoing self-timer countdown
by pressing the shutter button while the self-timer
lamp is flashing.
64
BASIC IMAGE RECORDING
NOTE
Specifying Image Size
• The “2 sec” self-timer setting is best when shooting
with a slow shutter speed, because it helps to avoid
blurring of images due to hand movement.
• In the case of the Triple Self-timer, the indicator
“1sec” appears on the monitor screen between the
recording of each image, indicating an interval of
about one second between image recording. The
actual amount of time required between images
depends on the camera’s current “Size” and “Quality”
settings, as well as the type of memory being used
and whether or not the flash is being used.
• The following functions are not available for use in
combination with the Triple Self-timer.
Coupling Shot (page 85), Pre-shot (page 87),
Business Shot (page 89)
“Image size” is the size of the image, expressed as the
number of vertical and horizontal pixels. A “pixel” is one of
the many tiny dots that make up the image. More pixels
provide finer detail when an image is printed, but a higher
pixel count also causes the image’s file size of to be larger.
You can select an image size to suit your needs for greater
detail or smaller file size.
1. In a REC mode, press [MENU].
2. Use [왗] and [왘] to select the “REC” tab.
3. Use [왖] and [왔] to select “Size”, and then
press [왘].
4. Use [왖] and [왔] to select the setting you
want, and then press [SET].
• When selecting the image size,the image size value
(pixels) will alternate on the display with a
corresponding print size. The print size indicates the
optimum paper size when you print an image that is
the image size you select.
65
BASIC IMAGE RECORDING
Image Size
2560 × 1920
Print Size
2560 × 1712
(3:2)
2048 × 1536
A3 Print (3:2 horizontal-tovertical ratio)
1600 × 1200
1280 × 960
5˝ × 7˝ Print
3.5˝ × 5˝ Print
640 × 480
E-mail (optimum size when
attaching image to e-mail)
Specifying Image Quality
A3 Print
Compressing an image before storage can cause a
deterioration of its quality. The more an image is
compressed, the greater the loss of quality. The image
quality setting specifies the compression ratio to be used
when an image is stored in memory. You can select an
image quality setting to suit your needs for higher quality or
smaller file size.
Larger
A4 Print
Smaller
1. In a REC mode, press [MENU].
• Indicated sizes are rough approximates only.
2. Use [왗] and [왘] to select the “REC” tab.
• The above print sizes are all approximate values when
printing at a resolution of 200 dpi (dots per inch). Use a
larger setting when you want to print at a higher
resolution or when you plan to produce a larger size print.
• Selecting the “2560 × 1712 (3:2)” image size will record
images with a 3:2 (horizontal : vertical ) aspect ratio,
which is optimal for printing on paper with an aspect ratio
of 3:2.
3. Use [왖] and [왔] to select “Quality”, and then
press [왘].
4. Use [왖] and [왔] to select the setting you
want, and then press [SET].
66
BASIC IMAGE RECORDING
To get this:
Select this setting:
High image quality, large file
size
Fine
Normal image quality and
normal file size
Normal
Low image quality, small file
size
Economy
Higher
Quality
Lower
Quality
IMPORTANT!
• Actual file size depends on the type of image you
record. This means that the remaining image
capacity noted on the monitor screen may not be
exactly accurate (pages 24, 204).
67
OTHER RECORDING FUNCTIONS
OTHER RECORDING FUNCTIONS
Selecting the Focus Mode
You can select one of five different focus modes: Auto
Focus, Macro, Pan Focus, Infinity, and Manual.
To set up the camera to do this:
Select this setting:
Focus automatically (Auto Focus)
None
Perform close-up focus (Macro)
Fix the focal distance (Pan Focus)
1. In a REC mode, press
[] (
[] (
Perform infinity focus (Infinity)
)
Focus manually (Manual Focus)
).
• Each press of [] (
)
cycles thorough the focus
mode settings in the
sequence shown below.
Focus mode indicator
68
OTHER RECORDING FUNCTIONS
Using Auto Focus
When you see this:
It means this:
As its name suggests, Auto Focus focuses the image
automatically. The automatic focus operation starts when
you press the shutter button down half way. The following
is the Auto Focus range.
Green focus frame
Green operation lamp
The image is focused.
Red focus frame
Flashing green operation lamp
The image is not
focused.
Range: Approximately 40cm to ∞ (1.3´ to ∞)
3. Press the shutter button the rest of the way to
record the image.
1. Press [] (
) to cycle through the focus
mode settings until there is no focus mode
indicator on the display.
NOTE
• When proper focusing is not possible because the
subject is closer than the Auto Focus range, the
camera automatically switches to the Macro mode
range (page 71).
2. Compose the image so the main subject is
within the focus frame, and then press the
shutter button half way.
• You can tell whether the image is focused by
observing the focus frame and the green operation
lamp.
10
■ Auto Pan Focus
When you press the shutter button all the way down in the
Auto Focus mode without pausing, the camera immediately
records the image using Pan Focus (page 72) without
waiting for Auto Focus to be performed. This helps to avoid
missing a special moment while you wait for the camera to
Auto Focus.
Green operation lamp
1600 1200
NORMAL
IN
1 / 1000
F2.6
04/ 12/24
04/12
24
12 : 58
1. In a REC mode, press [MENU].
Focus frame
69
OTHER RECORDING FUNCTIONS
2. Select the “REC” tab, select “Auto PF”, and
then press [].
3. Use [] and [] to select the setting you
want, and then press [SET].
To do this:
Select this setting:
Turn on Auto Pan Focus
On
Turn off Auto Pan Focus
Off
■ Specifying the Auto Focus Area
You can use the following procedure to change the Auto
Focus area used in the Auto Focus mode and the Macro
mode.
1. In a REC mode, press [MENU].
2. On the “REC” tab, select “AF Area”, and then
press [].
3. Use [] and [] to select the Auto Focus area
you want, and then press [SET].
70
For this type of Auto Focus area:
Select this:
Very limited range in the center of the
screen
• This setting works well with focus lock
(page 75).
Spot
Automatic selection of the focus area where
the subject closest to the camera is located
• With this setting, a wide focus frame,
which contains seven focus points,
appears on the monitor screen first. When
you press the shutter button half way, the
camera automatically selects the focus
point where the subject closest to the
camera is located, and a focus frame
appears at that point.
• This setting avoids the loss of focus of
foreground images that occurs when the
camera focuses on the background. It
comes in handy for simple snapshots
where the subject is not in the center of
the screen.
Multi
OTHER RECORDING FUNCTIONS
• Spot
• Multi
Using the Macro Mode
Use the Macro mode when you need to focus on close up
subjects. The following shows the approximate focus range
in the Macro mode.
Range: 6cm to 50cm (2.4˝ to 19.7˝)
1. Press [] (
Focus frame
) to cycle through the focus
mode settings until “ ” is shown as the
focus mode indicator.
Focus frame
2. Record the image.
• The focus and image recording operations are
identical to those in the Auto Focus mode.
NOTE
• When the Macro mode cannot focus properly
because the subject is too far away, the camera
automatically switches to the Auto Focus range
(page 69).
• Whenever you perform an optical zoom operation
(page 55) while recording with the Macro mode, a
value will appear on the monitor screen as shown
below to tell you the focusing range.
Example: 10cm - 50cm
71
OTHER RECORDING FUNCTIONS
IMPORTANT!
Using Pan Focus
• Use of the flash along with wide angle zoom or the
Macro mode can cause the light of the flash to
become blocked, which can produce unwanted
shadows in your image.
Normally, your camera performs Auto Focus to ensure that
your images are always in focus. Selecting Pan Focus
disables Auto Focus, so the shutter is released as soon as
you press the shutter button. This mode is best for basic
snapshots. The focus range depends on the zoom setting,
the amount of light available when recording, and other
recording conditions.
1. Press [] (
) to cycle through the focus
mode settings until “ ” is shown as the
focus mode indicator.
2. Press the shutter button all the way down to
immediately record without Auto Focus.
NOTE
• If you press the shutter
button half way, the focus
distance will appear on
the monitor screen.
Focus range
72
OTHER RECORDING FUNCTIONS
IMPORTANT!
Using the Infinity Mode
• The focus range at the optical zoom telephoto setting
is narrower than the focus range at the wide angle
setting.
• The focus range during darker lighting is narrower
than the focus range of brighter lighting.
The Infinity mode fixes focus at infinity (∞). Use this mode
when recording scenery and other faraway images.
1. Press [] (
) to cycle through the focus
mode settings until “ ” is shown as the
focus mode indicator.
2. Record the image.
73
OTHER RECORDING FUNCTIONS
2. While watching the
Using Manual Focus
image on the monitor
screen, use [] and
[] to focus.
With the Manual Focus mode, you can adjust the focus of
an image manually. The following shows focus ranges in
the Macro mode for two optical zoom factors.
Optical Zoom Factor
Approximate Focus Range
1X
6cm (2.4˝) to infinity (∞)
3X
18cm (7.1˝) to infinity (∞)
Manual focus position
To do this:
1. Press [] (
) to
cycle through the
focus mode settings
until “ ” is shown
as the focus mode
indicator.
• At this point, a
boundary also appears
on the display,
indicating the part of the
image that will be used
for manual focus.
Do this:
Focus in on the subject
Press [].
Focus out on the subject
Press [].
• Pressing [] or [] causes the area inside of the
boundary displayed in step 1 to fill the monitor
screen momentarily to aid in focus. The normal
image will reappear a short while later.
3. Press the shutter button to record the image.
Boundary
IMPORTANT!
• In the Manual Focus mode, the [] and [] keys
adjust focus, even if you used key customization to
assign other functions to them (page 104).
74
OTHER RECORDING FUNCTIONS
NOTE
Using Focus Lock
• Whenever you perform an optical zoom operation
(page 55) while recording with manual focus, a value
will appear on the monitor screen as shown below to
tell you the focusing range.
Example: MF 10cm - ∞
Focus lock is a technique you can use to focus on a subject
that is not located within the focus frame when you record
an image. You can use focus lock in the Auto Focus mode
).
and the Macro mode (
1. Using the monitor
screen, compose the
image so the main
subject is within the
focus frame, and then
press the shutter
button half way.
• This locks the focus on
the subject that is
currently within the
focus frame.
75
Main subject
10
1600 1200
NORMAL
IN
1 / 1000
F2.6
04/ 12/24
04/12
24
12:58
12
58
Focus frame
OTHER RECORDING FUNCTIONS
2. Keeping the shutter
Exposure Compensation (EV Shift)
10
1600 1200
NORMAL
button pressed half
way down, recompose the image
as you like.
Exposure compensation lets you change the exposure
setting (EV value) manually to adjust for the lighting of your
subject. This feature helps to achieve better results when
recording a backlit subject, a strongly lit subject indoors, or
a subject that is against a dark background.
IN
1 / 1000
F2.6
04/ 12/24
04/12
24
12 : 58
Main subject
EV Shift Range: –2.0EV to +2.0EV
Steps: 1/3EV
3. When the image is composed the way you
want, press the shutter button the rest of the
way to record it.
1. In a REC mode, press [MENU].
• The focus and image recording operations are
identical to those in the Auto Focus mode.
2. Select the “REC” tab,
select “EV Shift”, and
then press [].
NOTE
• Locking the focus also locks the exposure.
Exposure compensation
value
76
OTHER RECORDING FUNCTIONS
3. Use [] and [] to
• To cancel EV Shift, adjust the value until it becomes
0.0.
change the exposure
compensation value,
and then press [SET].
4. Record the image.
• Pressing [SET] registers
the displayed value.
IMPORTANT!
• When shooting under very dark or very bright
conditions, you may not be able to obtain satisfactory
results even after performing exposure
compensation.
EV value
[] : Increases the EV value. A higher EV value is best
used for light-colored subjects and backlight
subjects.
NOTE
• Performing an EV shift operation causes the
metering mode to switch automatically to center
weighted metering. Returning the EV shift value to
0.0 causes the metering mode to change back to
multi-pattern metering.
• You can use key customization (page 104) to
configure the camera to perform exposure
compensation whenever you press [] or [] while in
a REC mode. This comes in handy when adjusting
exposure compensation while viewing the on-screen
histogram (page 97).
[] : Decreases the EV value. A lower EV value is best
for dark-color subjects and for shooting outdoors
on a clear day.
77
OTHER RECORDING FUNCTIONS
3. Use [] and [] to select the setting you
Adjusting White Balance
want, and then press [SET].
The wavelengths of the light produced by various light
sources (daylight, light bulb, etc.) can affect the color of a
subject when it is recorded. White balance lets you make
adjustments to compensate for different lighting types, so
the colors of an image appear more natural.
When shooting under these conditions:
Normal conditions
Select this setting:
Auto
Outdoor daylight on a clear day
Outdoor daylight on an overcast or
rainy day, in the shade of a tree, etc.
1. In a REC mode, press [MENU].
In the shade of a building or any other
area where the color temperature is
high
2. Select the “REC” tab,
select “White
Balance”, and then
press [].
Under white or daylight white
fluorescent light (suppresses color
fogging)
1
Under daylight fluorescent light
(suppresses color fogging)
2
Under incandescent lighting
Difficult lighting that requires manual
control (See “Configuring the White
Balance Setting Manually”.)
78
Manual
OTHER RECORDING FUNCTIONS
NOTE
Configuring the White Balance Setting
Manually
• When “Auto” is selected for the white balance
setting, the camera automatically determines the
white point of the subject. Certain subject colors and
light source conditions can cause problems when the
camera tries to determine the white point, which
makes proper white balance adjustment impossible.
When this happens, use daylight, cloudy, or one of
the other fixed white balance settings to specify the
type of lighting available.
• You can use the key customization feature (page
104) to configure the camera so the white balance
setting changes whenever you press [] or [] while
in a REC mode.
Certain complex light sources or other environmental
conditions can make it impossible to obtain good results
when “Auto” or one of the fixed light source settings is
selected for white balance. Manual white balance lets you
configure the camera for a particular light source and other
conditions.
Note that you must perform manual white balance under
the same conditions you will be shooting under. Have a
sheet of white paper on hand before starting the following
procedure.
1. In a REC mode, press [MENU].
2. Select a “REC” tab, select “White Balance”,
and then press [].
79
OTHER RECORDING FUNCTIONS
3. Use [] and [] to
• This starts the white balance adjustment procedure.
The message “Complete” appears on the monitor
screen after white balance adjustment is complete.
select “Manual”.
• This causes the object
you last used to adjust
manual white balance to
appear on the monitor
screen. If you want to use
the same settings you
configured during a
previous manual white
balance setting
operation, skip step 4
and perform step 5.
• Dim lighting or pointing the camera at a dark colored
object while performing manual white balance
adjustment can cause the procedure to take a long
time to complete.
5. Press [SET].
• This registers the white balance settings and returns
to the currently selected recording mode.
NOTE
• After you adjust white balance manually, the setting
remains in effect until you change it or until you turn
off the camera.
4. Point the camera at a white paper or similar
object under the lighting conditions for which
you want to set the white balance, and then
press the shutter button.
White paper
80
OTHER RECORDING FUNCTIONS
Scene Number
Using the BESTSHOT Mode
22
23
Selecting one of the 23 BESTSHOT scenes automatically
sets up the camera for recording a similar type of image.
Scene Number
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Scene Name
Portrait
Scenery
Portrait With Scenery
Coupling Shot (page 85)
Pre-shot (page 87)
Children
Candlelight Portrait
Party
Pet
Flower
Natural Green
Sundown
Night Scene
Night Scene Portrait
Fireworks
Food
Text
Collection
Monochrome
Retro
Twilight
Scene Name
Business cards and documents (page 89)
White board, etc. (page 89)
Register User Scene (page 83)
1. Press [
] (REC), and
then select “
BESTSHOT” as the
recording mode (page
48).
• This enters the
BESTSHOT mode and
displays a sample scene.
• You can use the key customization feature (page
104) to configure the camera to enter the
BESTSHOT mode whenever you press [] or []
while in a REC mode.
2. Use [] and [] to select the sample scene
you want, and then press [SET].
• If you want to check which sample scene is currently
selected or if you want to change to a different
scene, press [SET] again.
3. Record the image.
81
OTHER RECORDING FUNCTIONS
IMPORTANT!
NOTE
• BESTSHOT scenes were not recorded using this
camera. They are provided as samples only.
• Due to shooting conditions and other factors, an
image recorded using the setup of a BESTSHOT
scene may not produce exactly the results you
expect.
• You can change the camera settings that are made
when you select a BESTSHOT scene. Note,
however, that the BESTSHOT settings revert to their
defaults when you select another BESTSHOT scene,
change the recording mode, or turn off the camera.
• Digital noise reduction processing is performed
automatically when you are recording a night scene,
fireworks, or other image that requires slow shutter
speeds. Because of this, it takes longer to record
images at lower shutter speeds. Make sure that you
do not perform any camera button operations until
the image recording operation is complete.
• When recording the image of a night scene,
fireworks, or some other image using a slow shutter
speed, use of a tripod is recommended to prevent
hand movement.
• Operation guidance and the currently selected
BESTSHOT scene appear on the display for about
two seconds after you enter the BESTSHOT mode
this way, or if the camera is in the BESTSHOT mode
when you turn it on.
82
OTHER RECORDING FUNCTIONS
5. Use [] and [] to select “Save”, and then
Creating Your Own BESTSHOT Setup
press [SET].
You can use the procedure below to save the setup of an
image you recorded as a BESTSHOT scene. After that,
you can recall the setup whenever you want to use it.
• This registers the setup. Now you can use the
procedure on page 81 to select your user setup for
recording.
1. Press [
] (REC), and then select “
BESTSHOT” as the recording mode (page 48).
• This enters the BESTSHOT mode and displays a
sample scene.
2. Use [] and [] to
display “Register
User Scene”.
3. Press [SET].
4. Use [] and [] to
display the image
whose setup you
want to register as a
BESTSHOT scene.
83
OTHER RECORDING FUNCTIONS
IMPORTANT!
To delete a BESTSHOT user setup
• BESTSHOT user setups are located in the camera’s
built-in memory following the built-in sample scenes.
• Note that formatting built-in memory (page 145)
deletes all BESTSHOT user setups.
1. Press [
] (REC), and then select “
BESTSHOT” as the recording mode (page 48).
2. Use [] and [] to display the user setup you
NOTE
want to delete.
• The following are the settings that are included in a
BESTSHOT user setup: focus mode, EV shift value,
white balance mode, flash mode, ISO sensitivity,
Flash Intensity, Flash Assist, Sharpness, Saturation,
and Contrast.
• Note that images recorded with this camera only can
be used to create a BESTSHOT user setup.
• You can have up to 999 BESTSHOT user setups in
the camera’s built-in memory at one time.
• You can check the current setup of a scene by
displaying the various setting menus.
• When you register a BESTSHOT user setup, it is
automatically assigned a file name using the format
shown below, and stored in the “SCENE” folder.
UEZ50nnn.JPE (n = 0 to 9)
3. Press [] (
) to delete the user setup.
4. Use [] and [] to select “Delete”.
5. Press [SET] to delete the file.
6. Press [MENU].
84
OTHER RECORDING FUNCTIONS
Combining Shots of Two People into a
Single Image (Coupling Shot)
• Combined
Images
Coupling Shot lets you record images of two people and
combine them into a single image. This makes it possible
for you to include yourself in group images, even when
there is no one else around to record the image for you.
Coupling Shot is available in the BESTSHOT mode (page
81).
• First Image
• Second
Image
This is the part
of the image that
does not include
the person who
is recording the
first image.
1. Press [
] (REC), and then select “
BESTSHOT” as the recording mode (page 48).
2. Use [] and [] to select “Coupling Shot”,
and then press [SET].
Making sure that
the background
of the image is
aligned correctly,
record the image
of the person
who recorded
the first image.
85
OTHER RECORDING FUNCTIONS
3. Align the focus frame
5. Next, align the focus
on the monitor screen
with the subject you
want on the left side
of the image.
• While “Coupling Shot” is
selected, the “AF Area”
(page 70) setting
automatically becomes
“Spot”.
frame with the
subject you want in
the right side of the
image, taking care to
align the actual
background with the
semi-transparent
background of the
first image, which is
shown on the monitor
screen.
Focus frame
4. Press the shutter button to record the left
side of the image.
Semi-transparent
background
• Pressing [MENU] any time after step 4 of the above
procedure cancels the first image and returns to step
3.
• The focus, exposure, white balance, zoom, and flash
settings are fixed for this type of image.
6. When everything is aligned correctly, record
the right side of the image.
86
OTHER RECORDING FUNCTIONS
• Freeze the background on
the monitor screen.
Recording a Subject onto an Existing
Background Image (Pre-shot)
Pre-shot helps you get the background you want, even if
you need to ask someone else to record the image for you.
Basically, Pre-shot is a two-step process.
1. You compose the background you want and press the
shutter button, which causes a semi-transparent image
of the background to remain on the monitor screen.
2. Ask someone else to record a shot of you against your
original background, telling them to compose the image
by using the semi-transparent monitor screen image as a
guide.
• The camera stores the image produced by step 2 only.
• Depending on how the image is actually composed in
step 2, its background may not be exactly the same as
the one you composed in step 1.
• Record the image, using
the background on the
monitor screen as a guide.
Note that Pre-shot is available in the BESTSHOT mode
only (page 81).
• Only the second image is
recorded.
87
OTHER RECORDING FUNCTIONS
1. Press [
• You can press [MENU] at this point to clear the semitransparent background from the monitor screen.
Then you can repeat step 3 to record a new
background.
] (REC), and then select “
BESTSHOT” as the recording mode (page 48).
2. Use [] and [] to select “Pre-shot”, and then
press [SET].
5. After composing the final image (using the
semi-transparent background as a guide), the
person with the camera should press the
shutter button to record.
3. Compose the background you want on the
monitor screen, and then press the shutter
button to temporarily record it as a reference
image.
• Note that the semi-transparent background image
you temporarily record in step 3 is for composition
purposes only. The final image contains only what is
in front of the camera when the shutter button is
pressed in step 5.
• This operation causes a semi-transparent image of
the background to appear on the monitor screen, but
the displayed image is not actually saved in camera
memory.
• The focus, exposure, white balance, zoom, and flash
settings are fixed for this type of image.
4. Now you can stand in
front of the
background and ask
someone else to snap
your picture, using
the semi-transparent
background on the
monitor screen as a
composition guide.
Semi-transparent
background
88
OTHER RECORDING FUNCTIONS
■ Setup Sample Images
Recording Images of Business Cards and
Documents (Business Shot)
• Business cards and
documents
Recording a business card, document, whiteboard, or
similarly shaped object from an angle can cause the
subject to appear misshaped in the resulting image.
Business Shot automatically corrects the shape of
rectangular objects to make them appear like the camera
was positioned directly in front of them.
• White board, etc.
IMPORTANT!
Before keystone
correction
• Before recording, compose the image so outline of
the item you want to record fits entirely within the
monitor screen. The camera will not be able to detect
the shape of the subject correctly unless it is
enclosed entirely within the monitor screen.
• The camera also will be unable to detect the shape
of the subject if it is the same color as the
background. Make sure the subject is against a
background that allows the outline of the subject to
stand out.
After keystone
correction
89
OTHER RECORDING FUNCTIONS
NOTE
To use Business Shot
• When the camera is at an angle to a business card
or document it is recording, the shape of the
business card or document may appear distorted in
the image. Auto keystone correction corrects for this
distortion, which means that subjects appear normal
even if you record at an angle.
1. Press [
] (REC), and then select “
BESTSHOT” as the recording mode (page 48).
2. Use [] and [] to select the Business Shot
image you want, and then press [SET].
3. Record the image.
• This displays a screen
that shows all of the
objects in the image that
qualify as candidates for
keystone correction. An
error message will
appear (page 202) if the
camera is unable to find
any suitable keystone
correction candidate in
the image. After a short
while, the original image
will be stored in memory,
as-is.
90
OTHER RECORDING FUNCTIONS
4. Use [] and [] to select the candidate you
Using the Movie Mode
want to correct.
You can record movies with audio. A single movie can be
as long as available memory capacity allows.
5. Use [] and [] to
select “Correct”, and
then press [SET].
• File Format: AVI
AVI format conforms to the Motion JPEG format promoted
by the Open DML Group.
• Selecting “Cancel” in
place of “Correct” stores
the original image as-is,
without correcting it.
• Image Size: 320 × 240 pixels
• Movie File Size: Approximately 300KB/second.
• Maximum Movie Length
— One Movie:
As long as available memory capacity allows
IMPORTANT!
• The maximum Business Shot image size is 1600 ×
1200 pixels, even if the camera is configured for a
larger image size. An image size setting smaller than
1600 × 1200 pixels records images at the specified
size.
NOTE
• You can play back movies recorded in the Movie
mode on your computer using Windows Media
Player.
91
OTHER RECORDING FUNCTIONS
1. Press [
] (REC), and
Movie”
then select “
as the recording mode
(page 48).
Remaining recording time
• Starting a movie record operation causes optical
zoom to be disabled. Only digital zoom is available
while a movie record operation is in progress. If you
want to use optical zoom to record a movie, perform
the zoom operation before starting the record
operation.
• This enters the Movie
mode and causes “
” to
appear on the monitor
screen.
• You can use the key
customization feature
(page 104) to configure
the camera to enter the
Movie mode whenever
you press [] or [] while
in a REC mode.
2. Point the camera at the
• The focus mode automatically changes to Pan Focus
(page 72) when you enter the Movie mode,
regardless of the mode memory’s (page 105) Focus
setting. You can, however, change to another focus
mode before starting a recording.
Recording time
3. When movie recording is complete, the movie
file is stored in file memory.
Movie recording indicator
subject and then press
the shutter button.
• Movie recording
continues as long as
remaining memory
capacity allows, or until
you stop it by pressing
the shutter button again.
92
OTHER RECORDING FUNCTIONS
IMPORTANT!
— Auto Focus is not performed in the case of the
Pan Focus (
), Manual Focus (
) and Infinity
(
) focus modes, and so no confirmation tone
sounds. In the case of the Manual Focus mode,
you cannot adjust focus settings while recording
is in progress. Be sure to make all adjustments
before beginning the record operation.
• Certain types of memory cards take longer to record
data, which can cause movie frames to be dropped.
and REC flash on the monitor screen during
recording to let you know when a frame has been
dropped.
• The flash does not fire in the Movie mode.
• This camera also records audio. Note the following
points when recording a movie.
— Take care that you do
not block the
microphone with your
fingers.
— Good recording
results are not
possible when the
camera is too far from
Microphone
the subject.
— Operating camera buttons during recording can
cause button noise to be included in the audio.
— Movie audio is recorded in monaural.
— The camera automatically switches to Pan Focus
(
) (page 72) whenever you enter the Movie
mode.
— The camera focuses automatically whenever you
) (page 68)
have Auto Focus or Macro (
selected as the focus mode. Note that the
confirmation tone that sounds during the Auto
Focus operation will be recorded in the audio. If
you do not want confirmation tones in your audio,
keep Pan Focus (
) as the focus mode, or
select Manual Focus (
) and manually focus the
image before starting your recording.
93
OTHER RECORDING FUNCTIONS
NOTE
Recording Audio
• You can play back an audio file recorded in the
Audio Snapshot mode on your computer using
Windows Media Player.
Recording audio for a snapshot creates two separate
files: one for the image data and one for the audio
data. Each file is stored in a different folder in
camera memory (page 172).
Adding Audio to a Snapshot
You can add audio to a snapshot after you record it.
• Image Format: JPEG
JPEG is an image format that provides efficient data
compression.
The file extension of a JPEG file is “.JPG”.
1. Press [
] (REC), and then select “
)” as the recording mode (page 48).
• Audio Format: WAVE/ADPCM recording format
This is the Windows standard format for audio recording.
The file extension of a WAVE/ADPCM file is “.WAV”.
(
• Recording Time:
Up to about 30 seconds per image
• You can use the key customization feature (page
104) to configure the camera to enter the Audio
Snapshot mode whenever you press [] or [] while
in a REC mode.
+
• This enters the Audio Snapshot mode and causes
“
” to appear on the monitor screen.
• Audio File Size:
Approximately 120KB (30-second recording of
approximately 4KB per second)
2. Press the shutter
button to record the
image.
• After the image is
recorded, the camera
enters audio recording
standby, with the image
you just recorded on the
monitor screen.
94
Remaining recording time
OTHER RECORDING FUNCTIONS
• You can cancel audio recording standby by pressing
[MENU].
Recording Your Voice
The Voice Recording mode provides quick and easy
recording of your voice.
3. Press the shutter button to start audio
recording.
• The green operation lamp flashes as recording is
performed.
• Audio Format: WAVE/ADPCM recording format
This is the Windows standard format for audio recording.
The file extension of a WAVE/ADPCM file is “.WAV”.
• If you have the monitor screen turned off (page 26),
the monitor screen turns on while you are adding
audio to a snapshot.
• Recording Time:
Approximately 39 minutes with built-in memory
• Audio File Size:
Approximately 120KB (30-second recording of
approximately 4KB per second)
4. Recording stops after about 30 seconds or
when you press the shutter button.
IMPORTANT!
NOTE
• You cannot use the Audio Snapshot mode in
combination with triple self-timer or Coupling Shot.
• You can play back files recorded in the Voice
Recording mode on your computer using Windows
Media Player.
95
OTHER RECORDING FUNCTIONS
1. Press [
] (REC), and
then select “
Voice” as the
recording mode (page
48).
• This enters the Voice
Recording mode and
causes “
” to appear
on the monitor screen.
• You can insert index marks while recording by
pressing [SET]. See page 124 for information about
jumping to an index mark during playback.
Recording time
3. To stop recording, press the shutter button
again. This also saves the recording to a file
in camera memory.
NOTE
Remaining recording time
• Holding down [DISP] as you press the power button
or [
] (REC) enters the Voice Recording mode
without extending the lens.
• You can use the key
customization feature
(page 104) to configure
the camera to enter the
Voice Recording mode
whenever you press []
or [] while in a REC
mode.
2. Press the shutter button to start voice
recording.
• The green operation lamp flashes as recording is
performed.
• Pressing [DISP] during voice recording turns off the
monitor screen.
96
OTHER RECORDING FUNCTIONS
■ Audio Recording Precautions
• Keep the microphone on the
front of the camera pointed
at the source.
• Take care that you do not
block the microphone with
your fingers.
Using the Histogram
Microphone
You can use the [DISP] button to display a histogram on
the monitor screen. The histogram lets you check exposure
conditions as you record images (page 26). You can also
display the histogram of a recorded image in the PLAY
mode.
• Good recording results are not possible when the camera
is too far from the subject.
• Pressing the power button or pressing [
] (PLAY) stops
recording and stores any audio recorded up to that point.
• You can also perform “after-recording” to add audio to a
snapshot after recording it, and also change the audio
recorded for an image. See page 122 for more
information.
Histogram
• A histogram is a graph that represents the lightness of an
image in terms of the number of pixels. The vertical axis
indicates the number of pixels, while the horizontal axis
indicates lightness. You can use the histogram to
determine whether an image includes the shadowing (left
side), mid tones (center), and highlighting (right) required
to bring out sufficient image detail. If the histogram
appears too lopsided for some reason, you can use EV
shift (exposure compensation) to move it left or right in
order to achieve better balance. Optimum exposure can
be achieved by correcting exposure so the graph is as
close to the center as possible.
97
OTHER RECORDING FUNCTIONS
• An RGB histogram that shows the distribution of R (red) ,
G (green) , and B (blue) components is also displayed.
This histogram can be used to determine whether there is
too much or too little of each of the color components in
an image.
• When the histogram is too far
to the right, it means that
there are too many light
pixels.
This type of histogram results
when the overall image is
light. A histogram that is too
far to the right may result in
“white out” of the light areas of
an image.
NOTE
• You can use key customization (page 104) to
configure the camera to perform exposure
compensation whenever you press [] or [] while in
a REC mode. If you do this, you can adjust exposure
compensation while viewing the on-screen histogram
(page 76).
• A centered histogram
indicates that there is good
distribution of light pixels and
dark pixels. This type of
histogram results when the
overall image is at optimal
lightness.
• When the histogram is too far
to the left, it means that there
are too many dark pixels.
This type of histogram results
when the overall image is
dark. A histogram that is too
far to the left may result in
“black out” of the dark areas
of an image.
98
OTHER RECORDING FUNCTIONS
IMPORTANT!
REC Mode Camera Settings
• Note that the above histograms are shown for
illustrative purposes only. You may not be able to
achieve exactly the same shapes for particular
subjects.
• A centered histogram does not necessarily
guarantee optimum exposure. The recorded image
may be over-exposed or under-exposed, even
though its histogram is centered.
• You may not be able to achieve an optimum
histogram configuration due to the limitations of EV
shift.
• Use of the flash as well as certain shooting
conditions can cause the histogram to indicate
exposure that is different from the actual exposure of
the image when it was recorded.
• The histogram does not appear when you are using
Coupling Shot (page 85) or Pre-shot (page 87).
• The RGB (color component) histogram is displayed
for snapshots only. In the Movie mode, only the
luminance distribution histogram appears on the
monitor screen.
The following are the settings you can configure before
recording an image using a REC mode.
•
•
•
•
•
•
•
•
•
•
ISO sensitivity
Sharpness
Saturation
Contrast
Grid on/off
Image Review on/off
Icon Help on/off
L/R key setting
Power on default settings
Resetting the camera
NOTE
• You can also configure the settings listed below. See
the referenced pages for more information.
— Size (page 65)
— Quality (page 66)
— White Balance (page 78)
— Digital Zoom (page 57)
— AF Area (page 70)
— Auto PF (page 69)
— Flash Intensity (page 61)
— Flash Assist (page 61)
99
OTHER RECORDING FUNCTIONS
IMPORTANT!
Specifying ISO Sensitivity
• Under certain conditions, a high shutter speed in
combination with a high ISO sensitivity setting can
cause digital noise (graininess), which makes an
image appear rough. For clean, good-quality images,
use the lowest ISO sensitivity setting possible.
• Using a high ISO sensitivity setting along with the
flash to shoot a nearby subject may result in
improper illumination of the subject.
You can change the ISO sensitivity setting for better
images in places where lighting is dim or when you are
using faster shutter speeds.
• ISO sensitivity is expressed in terms of values that
originally indicated the sensitivity to light for photographic
film. A larger value indicates higher sensitivity, which is
better for recording when available lighting is dim.
1. In a REC mode, press [MENU].
NOTE
• You can use the key customization feature (page
104) to configure the camera so the ISO sensitivity
setting changes whenever you press [] and []
while in a REC mode.
2. Select the “REC” tab, select “ISO”, and then
press [].
3. Use [] and [] to select the setting you want
and then press [SET].
To get this:
Select this setting:
Automatic sensitivity selection
Auto
Lower sensitivity
ISO 50
ISO 100
ISO 200
Higher sensitivity
ISO 400
100
OTHER RECORDING FUNCTIONS
Specifying Outline Sharpness
Specifying Color Saturation
Use the following procedure to control the sharpness of
image outlines.
Use the following procedure to control the intensity of the
image you are recording.
1. In a REC mode, press [MENU].
1. In a REC mode, press [MENU].
2. Select the “REC” tab, select “Sharpness”, and
2. Select the “REC” tab, select “Saturation”, and
then press [].
then press [].
3. Use [] and [] to select the setting you
3. Use [] and [] to select the setting you
want, and then press [SET].
want, and then press [SET].
To get this:
Select this setting:
To get this:
Select this setting:
High sharpness
+2
High color saturation (intensity)
+2
+1
Normal sharpness
+1
0
Normal color saturation (intensity)
–1
Low sharpness
0
–1
Low color saturation (intensity)
–2
101
–2
OTHER RECORDING FUNCTIONS
Specifying Contrast
Turning the On-screen Grid On and Off
Use this procedure to adjust the relative difference
between the light areas and dark areas of the image you
are recording.
You can display gridlines on the monitor screen to help you
compose images and ensure that the camera is straight
when recording.
1. In a REC mode, press [MENU].
2. Select the “REC” tab, select “Contrast”, and
then press [].
3. Use [] and [] to select the setting you
want, and then press [SET].
To get this:
Select this setting:
High contrast
+2
1. In a REC mode, press [MENU].
2. Select the “REC” tab, select “Grid”, and then
+1
Normal contrast
press [].
0
–1
Low contrast
3. Use [] and [] to select the setting you
–2
want, and then press [SET].
102
To do this:
Select this setting:
Display the grid
On
Hide the grid
Off
OTHER RECORDING FUNCTIONS
Turning Image Review On and Off
Using Icon Help
Image review displays the images you record on the
monitor screen as soon as you record them. Use the
following procedure to turn image review on and off.
Icon Help displays guidance text about an icon when you
select it on the monitor screen while in a REC mode.
• Icon Help text is displayed for the following functions:
Flash mode, focus mode, white balance, self-timer,
current REC mode.
Note, however, that current REC mode, white balance
and self-timer Icon Help text appears only when “REC
Mode” “White Balance” or “Self-timer” is assigned to the
[] and [] keys with the key customization feature (page
104).
1. In a REC mode, press [MENU].
2. Select the “REC” tab, select “Review”, and
then press [].
3. Use [] and [] to select the setting you
want, and then press [SET].
1. In a REC mode, press [MENU].
To do this:
Select this setting:
Display images on the monitor
screen for about one second
immediately after they are recorded
On
Do not display images immediately
after they are recorded
Off
2. Select the “REC” tab, select “Icon Help”, and
then press [].
3. Use [] and [] to select the setting you
want, and then press [SET].
103
To do this:
Select this setting:
Display guidance text when you
select an icon on the monitor screen.
On
Turn off Icon Help
Off
OTHER RECORDING FUNCTIONS
IMPORTANT!
Assigning Functions to the [] and []
Keys
• Selecting one of the following settings causes the
icon and its Icon Help text to appear momentarily on
the monitor screen. The icon and text disappear after
a short while.
— Flash mode
(Auto) icon (page 59)
(Auto Focus) icon (page 69)
— Focus mode
— White balance
(Auto) icon (page 78)
A “key customization” feature lets you configure the []
and [] keys so they change camera settings whenever
they are pressed in a REC mode. After you configure the
[] and [] keys, you can change the setting assigned to
them without going through the menu screen.
1. In a REC mode, press [MENU].
2. Select the “REC” tab, select “L/R Key”, and
then press [].
3. Use [] and [] to select the setting you
want, and then press [SET].
• After you assign a function, you can change its
setting simply by pressing the [] and [] keys.
—
—
—
—
—
—
104
REC Mode (page 48)
EV Shift (page 76)
White Balance (page 78)
ISO (page 100)
Self-timer (page 63)
Off: No function assigned
OTHER RECORDING FUNCTIONS
Specifying Power On Default Settings
Function
On
REC Mode
The camera’s “mode memory” feature lets you specify the
power on default settings individually for the recording
mode, flash mode, focus mode, white balance mode, ISO
sensitivity, AF Area, self-timer, flash intensity, digital zoom
mode, manual focus position and zoom position. Turning
on mode memory for a mode tells the camera to remember
the status of that mode when you turn off the camera, and
restore it the next time you turn the camera back on. When
mode memory is turned off, the camera automatically
restores the initial factory default setting for the applicable
mode.
— The following table shows what happens when you turn
mode memory on or off for each mode.
Off
Snapshot
Flash
Auto
Focus*1
Auto
White Balance
Auto
ISO
AF Area
Self-timer
Flash Intensity
Digital Zoom
MF Position
Zoom Position*2
Auto
Setting when
camera is
turned off
Spot
Off
0
On
Last Auto Focus
position that was in
effect before you
switched to manual
focus
Wide
*1 The focus mode setting is not remembered for the
Movie mode. PF (Pan Focus) is automatically
selected in the Movie mode.
*2 Only the optical zoom position is remembered.
105
OTHER RECORDING FUNCTIONS
1. In a REC mode, press [MENU].
IMPORTANT!
• Note that BESTSHOT mode settings take priority
over mode memory settings. If you turn the camera
off while in the BESTSHOT mode, all settings except
for “REC Mode” and “Zoom Position” will be
configured according to the BESTSHOT sample
scene when you turn it back on again, regardless of
mode memory on/off settings.
• If you turn the camera off while in the Movie mode,
the flash will be turned off “
” when you turn the
camera back on again, regardless of the mode
memory on/off setting for the flash.
2. Use [] and [] to select the “Memory” tab.
3. Use [] and [] to select the item you want to
change, and then press [].
4. Use [] and [] to select the setting you
want, and then press [SET].
To do this:
Select this setting:
Turn on mode memory so settings
are restored at power on
On
Turn off mode memory so settings
are initialized at power on
Off
106
OTHER RECORDING FUNCTIONS
Resetting the Camera
Use the following procedure to reset all of the camera’s
settings to their initial defaults as shown under “Menu
Reference” on page 192.
1. Press [MENU].
2. Select the “Set Up” tab, select “Reset”, and
then press [].
3. Use [] and [] to select “Reset”, and then
press [SET].
• To cancel the procedure without resetting, select
“Cancel” and press [SET].
107
PLAYBACK
PLAYBACK
2. Use [] (forward) or [] (back) to scroll
You can use the camera’s built-in monitor screen to view
images after you record them.
through files on the monitor screen.
Basic Playback Operation
Use the following procedure to scroll through files stored in
the camera’s memory.
NOTE
1. Press [
] (PLAY) to
turn on the camera.
[
]
• Holding down [] or [] scrolls images at high
speed.
• In order to allow for faster playback image scrolling,
the image that initially appears on the monitor screen
is a preview image, which is of somewhat lower
quality than the actual display image. The actual
display image appears a short while after the preview
image. This does not apply to images copied from
another digital camera.
• This enters the PLAY
mode and causes an
image or a message to
appear on the monitor
screen.
PLAY mode file type
Folder number/ File number
Image size
Quality
Date and time
108
PLAYBACK
IMPORTANT!
Playing an Audio Snapshot
• Audio volume can be adjusted only when playback is
being performed or is paused.
Perform the steps below to display an audio snapshot
) and play its audio.
(indicated by
1. In the PLAY mode, use [] and [] until the
image you want is displayed.
2. Press [SET].
• This plays back the
audio that accompanies
the displayed image.
• You can perform the
following operations
while audio is playing.
To do this:
Do this:
Fast forward or fast reverse
the audio
Hold down [] or [].
Pause and unpause audio
playback
Press [SET].
Adjust audio volume
Press [] or [].
Cancel playback
Press [MENU].
109
PLAYBACK
1. In the PLAY mode, use [] and [] to scroll
Flipping the Display
through images on the monitor screen and
display the one you want.
The following procedure flips the image 180 degrees. This
comes in handy when you want to show someone standing
in front of you an image on the monitor screen.
2. While holding down the shutter button, press
[SET].
[SET]
• This flips the image 180 degrees. The histogram or
any other display information you had displayed is
cleared automatically whenever you flip the image.
• While an image is flipped, you can use [] and [] to
scroll to another image, if you want.
3. To return the image to its normal orientation,
press any button other than [], [], [], or
[].
Shutter button
IMPORTANT!
• Note that you cannot play a movie, or a voice
recording file on the monitor screen while a flipped
image is displayed.
• You cannot use the above procedure to flip an image
while a zoomed image, 9-image screen, calendar
screen image, a movie image, an audio snapshot, or
a voice recording file icon is on the display.
110
PLAYBACK
IMPORTANT!
Zooming the Display Image
• You cannot zoom a movie image.
• Depending on the original size of the recorded
image, you may not be able to zoom a display image
the full four times normal size.
Perform the following procedure to zoom the image
currently on the monitor screen up to four times its normal
size.
1. In the PLAY mode, use [] and [] to display
the image you want.
2. Press the zoom
button ( ) to enlarge
the image.
• You can toggle display
of the zoom factor on
and off by pressing
[DISP].
Current zoom factor
3. Use [], [], [], and [] to shift the image
up, down, left, or right.
4. Press [MENU] to return the image to its
original size.
111
PLAYBACK
IMPORTANT!
Resizing an Image
• Resizing an image creates a new file that contains
the image in the size you select. The file with the
original image also remains in memory.
• Note that you cannot resize the following types of
images.
— 640 × 480-pixel and smaller images
— 2560 × 1712-pixel (3:2) images
— Movie images and the voice recording file icon
— Images recorded with another camera
• The resize operation cannot be performed when
there is not enough memory to store the resized
image.
• When you display a resized image on the camera’s
monitor screen, the date and time that appear when
the image is displayed indicate when the image was
originally recorded, not when the image was resized.
You can resize a recorded image to either of the two
following sizes.
• 1280 × 960 pixels (SXGA): Best for print sizes 3.5˝ × 5˝ or
smaller
• 640 × 480 pixels (VGA): Best for attachment to e-mail
messages or incorporation into Web pages
1. In the PLAY mode, press [MENU].
2. Select the “PLAY”
tab, select “Resize”,
and then press [].
• Note that this operation is
possible only when a
snapshot image is on the
monitor screen.
3. Use [] and [] to scroll through images and
display the one you want to resize.
4. Use [] and [] to select the setting you
want, and then press [SET].
• To cancel the resize operation, select “Cancel”.
112
PLAYBACK
5. Use [], [], [], and [] to move the
Cropping an Image
cropping boundary up, down, left, or right
until the area of the image you want to extract
is within the boundary.
You can use the following procedure to crop a portion of an
enlarged image.
6. Press [SET] to extract the part of the image
1. In the PLAY mode, use [] and [] to scroll
enclosed in the cropping boundary.
through images and display the one you want
to crop.
• If you want to cancel the procedure at any point,
press [MENU].
2. Press [MENU].
3. Select the “PLAY”
tab, select
“Trimming”, and then
press [].
• This causes a cropping
boundary to appear.
• Note that this operation is
possible only when a
snapshot image is on the
monitor screen.
4. Use the zoom button (
) to make the
cropping boundary larger or smaller.
• The smaller the image, the more limited is the size of
the cropping boundary.
113
PLAYBACK
IMPORTANT!
Playing a Movie
• Cropping an image creates a new file that contains
the cropped image. The file with the original image
also remains in memory.
• Note that you cannot crop the following types of
images.
— 2560 × 1712 pixel (3:2) images
— Movie images and the voice recording file icon
— Images recorded with another camera
• The cropping operation cannot be performed when
there is not enough memory to store the cropped
image.
• When you display a cropped image on the camera’s
monitor screen, the date and time that appear when
the image is displayed indicate when the image was
originally recorded, not when the image was
cropped.
Use the following procedure to play back a movie that was
recorded in the movie mode.
1. In the PLAY mode,
Movie icon
press [] and [] to
scroll through images
until the movie you
want to play is
displayed.
2. Press [SET].
• This start playback of the movie.
• You can perform the following operations while a
movie is playing.
114
To do this:
Do this:
Fast forward or fast reverse the
movie
Hold down []
or [].
Pause and unpause movie playback
Press [SET].
Skip forward or back one frame
while paused
Press [] or [].
Cancel playback
Press [MENU].
Adjust audio volume
Press [] or [].
PLAYBACK
IMPORTANT!
Displaying the 9-image View
• Audio volume can be adjusted only when playback is
being performed or is paused.
The following procedure displays nine images on the
monitor screen at the same time.
1. In the PLAY mode, press the zoom button
(
).
• This displays the 9-image screen with the image that
was on the monitor screen in step 2 in the center,
with a selection boundary around it.
• On the 9-image screen,
recording file (page 124).
indicates a voice
• If there are fewer than nine images in memory, they
are displayed starting from the upper left corner. The
selection boundary is located at the image that was
on the display before you switched to the 9-image
view.
115
PLAYBACK
2. Use [], [], [], and
Selection boundary
Displaying the Calendar Screen
[] to move the
selection boundary to
the image you want.
Pressing [] while the
selection boundary is
in the right column or
[] while it is in the left
column scrolls to the
next full screen of nine
images.
Use the following procedure to display a 1-month calendar.
Each day shows the first image recorded on that day,
which makes it easy to find the image you want.
1. In the PLAY mode,
press [] (
Example: When there are 20 images in memory, and
Image 1 is displayed first
17
18
19
20
1
2
9
3
4
5
12
6
7
8
15
16
17
10
11
18
19
20
13
14
1
2
3
).
• Use the procedure
under “Changing the
Date Format” on page
140 to specify the date
format.
• The image displayed on
the calendar for each
date is the first image
that was recorded on
that date.
Month/Year
Date selection cursor
• To exit the calendar screen, press [MENU] or [DISP].
3. Pressing any button besides [], [], [], or
• On the calendar screen,
recording file (page 124).
[] displays the full-size version of the image
where the selection boundary is located.
•
116
indicates a voice
appears in place of the image when the date
contains data that cannot be displayed by this
camera.
PLAYBACK
2. Use [], [], [], and [] to move the
Playing a Slideshow
selection boundary to the date whose image
you want to view, and then press [SET].
A slideshow automatically plays back images in sequence
at a fixed interval.
• This displays the first image that was recorded on
the selected date.
1. In the PLAY mode, press [MENU].
2. Select the “PLAY” tab, select “Slideshow”,
and then press [].
117
PLAYBACK
3. Use the screen that appears to configure the
IMPORTANT!
image, time, and interval settings.
Images
• All Images
Displays all images in camera memory.
• One Image
Displays a particular image.
• Favorites
Displays all images in the FAVORITE folder.
Time
Use [] and [] to specify the playback time you
want (1 to 60 minutes).
Interval
Use [] and [] to specify the interval you want
(MAX, or 1 to 30 seconds).
• When playback reaches a movie file while
“MAX” is selected as the interval, only the first
frame of the movie is displayed.
• Note that all buttons are disabled while an image
change is in progress. Wait until an image is stopped
on the monitor screen before performing a button
operation, or hold down the button until the image
stops.
• Pressing [] during a slideshow will scroll to the
previous image, while [] scrolls to the next image.
• When the slideshow comes to a movie file, it plays
the movie and its audio once.
• When the slideshow comes to a voice recording file
or an audio snapshot, it plays the audio once.
• The audio of movies, audio snapshots, and voice
recording files is not played when “MAX” is specified
for the slideshow “Interval” setting. With all other
“Interval” settings, movies and all audio (movies,
audio snapshots, voice recording files) are played
back, regardless of their length.
• While audio is playing, you can use [] and [] to
adjust the volume level.
• Images copied from another digital camera or a
computer may take longer time to appear than the
slideshow interval time you specify.
• If there are indicators on the display, you can clear
them by pressing [DISP] (page 26).
4. Use [] and [] to select “Start”, and then
press [SET].
• This starts the slideshow.
5. To stop the slideshow, press [SET].
• The slideshow will also stop automatically after the
amount of time you specified for “Time” elapses.
118
PLAYBACK
• Pressing [MENU] displays a screen for configuring
slideshow settings. To restart the slideshow, press
[MENU] while the menu screen is displayed, or
select “Start” and then press [SET].
• While audio is playing, you can use [] and [] to
adjust the volume level.
Using the Photo Stand Feature
The “Photo Stand” feature lets you specify what should
appear on the camera’s monitor screen while the camera is
on its USB cradle. You can play a Photo Stand slideshow
without worrying about remaining battery power, or you can
specify display of a particular image. Photo Stand feature
operations are performed in accordance with slideshow
setting. See page 117 for information about configuring
slideshow settings to suit your needs.
4. To stop the Phot Stand slideshow, press
[PHOTO] again.
1. Turn off the camera.
2. Set the camera onto the USB cradle.
IMPORTANT!
• The battery is not charged while a Photo Stand
slideshow is in progress. To charge the battery, stop
the slideshow.
• Do not place the camera onto the USB cradle while it
is turned on.
3. Press the USB cradle’s
[PHOTO] button.
• This starts the Photo
Stand slideshow with the
images or image you
specified (page 118).
[PHOTO]
119
PLAYBACK
4. Use [] and [] to
Rotating the Display Image
select “Rotate”, and
then press [SET].
Use the following procedure to rotate the image 90 degrees
and register the rotation information along with the image.
After you do this, the image is always displayed in its
rotated orientation.
• Each press of [SET]
rotates the image 90
degrees.
1. In the PLAY mode, press [MENU].
5. After you are finished configuring settings,
press [MENU] to exit the setting screen.
2. Select the “PLAY” tab, select “Rotation”, and
then press [].
IMPORTANT!
• Note that this operation is possible only when a
snapshot image is on the monitor screen.
• You cannot rotate an image that is protected. To
rotate such an image, first unprotect it.
• You may not be able to rotate a digital image that
was recorded with another type of digital camera.
• You cannot rotate movie images or the voice
recording file icon.
3. Use [] and [] to scroll through images until
the one you want to rotate is on the monitor
screen.
120
PLAYBACK
IMPORTANT!
Using Image Roulette
• Image Roulette does not play movie files or display
the voice recording file icon.
• Image Roulette is disabled when there is only one
snapshot image available.
• Note that Image Roulette works only with images
recorded with this camera. Image Roulette may not
operate properly when other types of images are in
memory.
• If you do not start another Image Roulette operation
for about one minute after the final image appears,
the camera will automatically cancel Image Roulette
and enter the normal PLAY mode.
• You can use Image Roulette while “Power On” or
“Power On/Off” is selected for the “REC/PLAY”
setting (page 144).
Image Roulette cycles images like a slot machine on the
display, before stopping at one of them. The image that
finally appears is random.
1. While the camera is turned off, hold down []
as you press [
] (PLAY) to turn it on.
• Keep [] held down until images appear on the
monitor screen.
• This starts the Image Roulette operation, scrolling
images on the display, finally stopping at one.
2. Press [] or [] to restart the Image Roulette
operation.
3. To turn off Image Roulette, press [
] (REC)
to enter the currently selected recording
mode or press the power button to turn off
the camera.
121
PLAYBACK
1. In the PLAY mode, use [] and [] to scroll
Adding Audio to a Snapshot
through snapshots until the one to which you
want to add audio is displayed.
The “after-recording” feature lets you add audio to
snapshots after they are recorded. You can also re-record
the audio of an audio snapshot (one with a
icon on it).
2. Press [MENU].
• Audio Format: WAVE/ADPCM recording format
This is the Windows standard format for audio recording.
The file extension of a WAVE/ADPCM file is “.WAV”.
3. Select the “PLAY”
tab, select “Dubbing”,
and then press [].
• Recording Time:
Up to about 30 seconds per image
• Audio File Size:
Approximately 120KB (30-second recording of
approximately 4KB per second)
4. Press the shutter button to start audio
recording.
5. Recording stops after about 30 seconds or
when you press the shutter button.
122
PLAYBACK
IMPORTANT!
To re-record audio
Microphone
• Keep the microphone
on the front of the
camera pointed at the
subject.
• Take care that you do
not block the
microphone with your
fingers.
• Good recording results
are not possible when
the camera is too far
from the subject.
• The
(Audio) icon appears on the monitor screen
after audio recording is complete.
• You will not be able to record audio when remaining
memory capacity is low.
• The following types of audio recording are not
supported.
— Adding audio to a movie image
— Adding audio to a protected snapshot (page 128)
• Audio that is re-recorded or deleted cannot be
recovered. Make sure you no longer need audio
before re-recording or deleting it.
1. In the PLAY mode, use [] and [] to scroll
through snapshots until the one whose audio
you want to re-record is displayed.
2. Press [MENU].
3. Select the “PLAY” tab, select “Dubbing”, and
then press [].
4. Use [] and [] to select “Delete”, and then
press [SET].
• If you merely want to delete the audio without rerecording, press [MENU] here to complete the
procedure.
5. Press the shutter button to start audio
recording.
6. Recording stops after about 30 seconds or
when you press the shutter button.
• This deletes the existing audio and replaces it with
the new one.
123
PLAYBACK
IMPORTANT!
Playing Back a Voice Recording File
• Audio volume can be adjusted only when playback is
being performed or is paused.
• If your recording has index marks (page 96) inside it,
you can jump to the index mark before or after the
current playback location by pausing playback and
then pressing [] or []. Next, press [SET] to
resume playback from the index mark position.
Perform the following steps to play back a voice recording
file.
1. In the PLAY mode, use [] and [] to display
the voice recording file (a file with
you want to play.
on it)
2. Press [SET].
• This starts playback of
the voice recording file
through the camera’s
speaker.
• You can perform the
following operations
while audio is playing.
To do this:
Do this:
Fast forward or fast reverse
the audio
Hold down [] or [].
Pause and unpause audio
playback
Press [SET].
Adjust audio volume
Press [] or [].
Cancel playback
Press [MENU].
124
DELETING FILES
DELETING FILES
You can delete a single file, or you can delete all files
currently in memory.
Deleting a Single File
1. In the PLAY mode,
IMPORTANT!
press [] (
• Note that file deletion cannot be undone. Once you
delete a file, it is gone. Make sure you really do not
need a file anymore before you delete it. Especially
when deleting all files, make sure you check all the
files you have stored before proceeding.
• A protected file cannot be deleted. To delete a
protected file, unprotect it first (page 128).
• Delete cannot be performed when all files in memory
are protected (page 129).
• Deleting an audio snapshot deletes both the image
file and the audio file attached to it.
• You cannot use the procedures in this section to
delete images from the FAVORITE folder. See the
procedures on page 129 and 132 for details about
deleting FAVORITE folder contents.
).
2. Use [] and [] to scroll through files and
display the one you want to delete.
3. Use [] and [] to select “Delete”.
• To exit the file delete operation without deleting
anything, select “Cancel”.
4. Press [SET] to delete the file.
• Repeat steps 2 through 4 to delete other files, if you
want.
5. Press [MENU] to exit the menu screen.
125
DELETING FILES
Deleting All Files
1. In the PLAY mode, press [] (
).
2. Use [] and [] to select “All Files Delete”,
and then press [SET].
3. Use [] and [] to select “Yes”.
• To exit the file delete operation without deleting
anything, select “No”.
4. Press [SET] to delete all the files.
• The message “There are no files.” appears on the
screen after all of the files are deleted.
126
FILE MANAGEMENT
FILE MANAGEMENT
The file management capabilities of the camera make it
easy to keep track of images. You can protect files against
deletion and store the files you want in the camera’s built-in
memory.
Each folder can hold files numbered up to 9,999.
Trying to store the 10,000th file in a folder causes the next
serially numbered folder to be created. File names are
generated as shown below.
Example: Name of the 26th file
Folders
CIMG0026.JPG
Your camera automatically creates folders in its built-in
flash memory or on the memory card.
Extension
Serial number (4 digits)
Memory Folders and Files
• The folder and file names described here appear when
you view folders and files on a computer. See page 25 for
information about how the camera displays folder and file
names.
• The actual number of files you will be able to store on a
memory card depends on image size and quality, card
capacity, etc.
• For details about the folder structure, see “Memory Folder
Structure” on page 172.
An image you record is automatically stored in a folder,
whose name is a serial number. You can have up to 900
folders in memory at the same time. Folder names are
generated as shown below.
Example: Name of the 100th folder.
100CASIO
Serial number (3 digits)
127
FILE MANAGEMENT
4. Use [] and [] to
Protecting Files
select “On”, and then
press [SET].
Once you protect a file it cannot be deleted (page 125).
You can protect files individually or you can protect all files
in memory with a single operation.
• A file that is protected is
indicated by the
mark.
To protect a single file
• To unprotect a file, select
“Off” in step 4, and then
press [SET].
1. In the PLAY mode, press [MENU].
5. Press [MENU] to exit the menu screen.
2. Select the “PLAY” tab,
select “Protect”, and
then press [].
3. Use [] and [] to scroll through files and
display the one you want to protect.
128
FILE MANAGEMENT
To protect all files in memory
Using the FAVORITE Folder
You can copy scenery shots, photos of your family, or other
special images from a file storage folder (page 173) to the
FAVORITE folder in built-in memory (page 173). Images in
the FAVORITE folder are not displayed during normal
playback, so it helps to keep your personal images private
as you carry them around. FAVORITE folder images are
not deleted when you change memory cards, so you can
always keep them on hand.
1. In the PLAY mode, press [MENU].
2. Select the “PLAY” tab, select “Protect”, and
then press [].
3. Use [] and [] to select “All Files : On”, and
then press [SET].
• To unprotect all files, press [SET] in step 3 so the
setting shows “All Files : Off”.
To copy a file to the FAVORITE folder
4. Press [MENU] to exit the menu screen.
1. In the PLAY mode, press [MENU].
2. Select the “PLAY” tab,
select “Favorites”, and
then press [].
129
FILE MANAGEMENT
3. Use [] and [] to
NOTE
select “Save”, and
then press [SET].
• Copying an image file with the above procedure
creates a 320 × 240-pixel QVGA-size image in the
FAVORITE folder.
• A file copied into the FAVORITE folder is
automatically assigned a file name that is a serial
number. Though the serial number starts from 0001
and can go as high as 9999, the actual upper end of
the range depends on built-in memory capacity.
Remember that the maximum number of images that
can be stored in built-in memory depends on the size
of each image and other factors.
• This displays the names
of the files in built-in
memory or on the loaded
memory card.
4. Use [] and [] to select the file you want to
copy to the FAVORITE folder.
5. Use [] and [] to select “Save”, and then
press [SET].
IMPORTANT!
• This copies the displayed file to the FAVORITE
folder.
• Note that an image that has been copied to the
FAVORITE folder and then resized cannot be
returned to its original size.
• Files in the FAVORITE folder cannot be copied to a
memory card.
6. After copying all of the files you want, use []
and [] to select “Cancel”, and then press
[SET] to exit.
130
FILE MANAGEMENT
IMPORTANT!
To display a file in the FAVORITE folder
• Note that a FAVORITE folder is created in the
camera’s built-in memory only. No FAVORITE folder
is created on a memory card when you use one. If
you want to view the contents of the FAVORITE
folder on your computer screen, you need to remove
the memory card from the camera (if you are using
one) before placing the camera onto the USB cradle
to start data communication (pages 160, 166).
1. In the PLAY mode, press [MENU].
2. Select the “PLAY” tab, select “Favorites”, and
then press [].
3. Use [] and [] to select “Show”, and then
press [SET].
• If the FAVORITE folder is empty, the message “No
Favorites file!” appears.
4. Use [] (forward) and
File Name
[] (back) to scroll
through the files in the
FAVORITE folder.
FAVORITE folder icon
5. After you are finished viewing files, press
[MENU] twice to exit.
131
FILE MANAGEMENT
To delete a file from the FAVORITE
folder
To delete all files from the FAVORITE
folder
1. In the PLAY mode, press [MENU].
1. In the PLAY mode, press [MENU].
2. Select the “PLAY” tab, select “Favorites”, and
2. Select the “PLAY” tab, select “Favorites”, and
then press [].
then press [].
3. Use [] and [] to select “Show”, and then
3. Use [] and [] to select “Show”, and then
press [SET].
4. Press [] (
press [SET].
4. Press [] (
).
).
5. Use [] and [] to select “All Files Delete”,
5. Use [] and [] to select the file you want to
and then press [SET].
delete from the FAVORITE folder.
6. Use [] and [] to select “Delete”, and then
IMPORTANT!
press [SET].
• You cannot use the delete operations on page 125 to
delete images from the FAVORITE folder.
Performing the memory format operation (page 145),
however, does delete FAVORITE folder files.
• To exit the file delete operation without deleting
anything, select “Cancel”.
7. After deleting all of the files you want, use []
and [] to select “Cancel”, and then press
[SET] to exit.
132
OTHER SETTINGS
OTHER SETTINGS
4. Use [] and [] to change the setting, and
Configuring Sound Settings
then press [SET].
You can configure different sounds to play whenever you
turn on the camera, press the shutter button half-way or all
the way, or perform a key operation.
To configure sound settings
1. Press [MENU].
2. Select the “Set Up” tab, select “Sounds”, and
then press [].
3. Use [] and [] to select the sound whose
setting you want to configure, and then press
[].
133
To do this:
Select this setting:
Select a built-in sound
Sound 1 through Sound 5
Turn off the sound
Off
OTHER SETTINGS
To set the volume level
Specifying an Image for the Startup Screen
You can specify an image you recorded as the startup
screen image, which causes it to appear on the monitor
screen for about two seconds whenever you press the
] (REC) to turn on the camera. The
power button or [
startup screen image does not appear if you press [
]
(PLAY) to turn on the camera.
1. Press [MENU].
2. Select the “Set Up” tab, select “Sounds”, and
then press [].
3. Use [] and [] to select “Volume”.
1. Press [MENU].
4. Use [] and [] to specify the volume setting
you want, and then press [SET].
2. Select the “Set Up” tab, select “Startup”, and
• You can set the volume in the range of 0 (no sound)
to 7 (loudest).
then press [].
3. Use [] and [] to display the image you want
to use as the startup image.
4. Use [] and [] to change the setting, and
then press [SET].
134
To do this:
Select this setting:
Use the currently displayed image
as the startup screen image
On
Disable the startup screen
Off
OTHER SETTINGS
IMPORTANT!
Configuring Power Down Image Settings
• You can select any one of the following types of
image as the startup image.
— The camera’s built-in image
— A snapshot
— The image only of an audio snapshot
— A movie whose file size is less than the amount of
unused built-in memory still available
• Only one image can be stored in startup image
memory at one time. Selecting a new startup image
overwrites anything that is already stored in startup
image memory. Because of this, if you want to return
to a previous startup image, you need to have a
separate copy of that image in the camera’s standard
image memory.
• The startup image is deleted if you format built-in
memory (page 145).
• If you store an audio snapshot to startup image
memory, the image’s audio is not played when the
image is displayed at startup.
With the power down image feature, you can configure the
camera so a specific snapshot or movie stored in camera
image memory appears whenever you turn off power.
1. Use the USB cable to connect the camera to
your computer (page 160).
2. Move the image data that you want to use for
the power down image to the top (root) folder
of the camera’s built-in Flash memory.
• The file name extension will not be displayed if your
computer is configured to hide file name extensions.
Example: CIMG0001
• If your power down image is stored on a memory
card, be sure to copy the image to built-in memory
before removing the memory card from the camera.
135
OTHER SETTINGS
3. Change the name of the file to one of the
NOTE
following.
• To disable display of the power down image, change
the name of the current power down image from
ENDING.JPG or ENDING.AVI to something else. Or
you can delete the current power down image from
flash memory.
Snapshot Image: ENDING.JPG
Movie Image: ENDING.AVI
• You do not need to input the file name extension
(JPG or AVI) if your computer is configured to hide
file name extensions.
File Name: ENDING
• Now when you turn off the camera, the power down
image you specified above will appear on the monitor
screen.
IMPORTANT!
• Formatting the camera’s flash memory deletes the
power down image (page 145).
• When both a still image and a movie are present for
the power down image, only the movie is used.
• Note that a power down image display operation
cannot be interrupted once it starts. Because of this,
you should select a relatively short movie when using
a movie file as the power down image.
136
OTHER SETTINGS
Specifying the File Name Serial Number
Generation Method
Using the Alarm
You can configure up to three alarms that cause the
camera to beep and display a specified image at the time
you specify. Specifying a movie or an audio snapshot plays
back the image and the audio at the assigned time.
Specifying a voice recording file plays the audio.
• You can configure up to three alarms, named “Alarm 1”,
“Alarm 2”, and “Alarm 3”.
Use the following procedure to specify the method for
generating the serial number used for file names (page 127).
1. Press [MENU].
2. Select the “Set Up” tab, select “File No.”, and
then press [].
1. In the PLAY mode, press [MENU].
3. Use [] and [] to change the setting, and
2. Select the “PLAY” tab, select “Alarm”, and
then press [SET].
then press [].
To do this for a newly saved file:
Select this setting:
3. Use [] and [] to select the alarm (1, 2, or 3)
Store the last file number used and
increment it, regardless of whether
files are deleted or whether the
memory card is replaced with a new
one
Continue
Find the highest file number in the
current folder and increment it
Reset
whose setting you want to configure, and
then press [].
4. Use [] and [] to select the setting you want
to change, and then use [] and [] to
change the selected setting.
• You can set an alarm time and configure the alarm to
sound only once (Once) or at the same time
everyday (Daily). You can also turn the alarm on or
off.
137
OTHER SETTINGS
5. Press [DISP].
NOTE
• When an alarm time is reached while the camera is
turned off, the alarm will sound for about one minute
(or until you stop it), and then the camera will turn
on. To stop the alarm after it starts to sound, press
any button. If the camera is on the USB cradle when
an alarm sounds, you can stop it by pressing the
USB cradle [USB] button or [PHOTO] button, or any
camera button.
• You could press [SET] in place of [DISP] if you want
to configure the alarm without an image.
6. Use [] and [] to select the scene you want
to appear at the alarm time, and then press
[SET].
7. After all the settings are the way you want,
press [SET].
IMPORTANT!
• Note that the alarm does not sound if the alarm time
is reached when any one of the following conditions
exists.
— While the camera is turned on
— While a USB data communication operation is in
progress
— While a Photo Stand operation is in progress
138
OTHER SETTINGS
4. Use [] and [] to select “City”, and then
Setting the Clock
press [].
Use the procedures in this section to select a Home Time
Zone, and to change its date and time settings. If you want
to change the time and date setting only without changing
the Home Time Zone, perform the procedure under “To set
the current time and date” (page 140) only.
5. Use [], [], [], and [] to select the
geographical area that contains location you
want to select as your Home Time zone, and
then press [SET].
IMPORTANT!
6. Use [] and [] to select the city you want,
• Make sure you select your Home Time zone (the
zone where you are currently located) before
changing the time and date settings. Otherwise, the
time and date setting will change automatically when
you select another time zone.
and then press [SET].
7. After selecting the city you want, press [SET]
to register its zone as your Home Time zone.
To select your Home Time zone
1. Press [MENU].
2. Select the “Set Up” tab, select “World Time”,
and then press [].
• This displays the current World Time zone.
3. Use [] and [] to select “Home”, and then
press [].
139
OTHER SETTINGS
To set the current time and date
Changing the Date Format
1. Press [MENU].
You can select from among three different formats for
display of the date.
2. Select the “Set Up” tab, select “Adjust”, and
1. Press [MENU].
then press [].
2. Select the “Set Up” tab, select “Date Style”,
3. Set the current date and the time.
and then press [].
To do this:
Do this:
Change the setting at the current
cursor location
Press [] or [].
then press [SET].
Move the cursor between settings
Press [] or [].
Example: December 24, 2004
Toggle between 12-hour and 24hour timekeeping
Press [DISP].
3. Use [] and [] to change the setting, and
4. When all the settings are the way you want,
press [SET] to register them and exit the
setting screen.
140
To display the date like this:
Select this format:
04/12/24
YY/MM/DD
24/12/04
DD/MM/YY
12/24/04
MM/DD/YY
OTHER SETTINGS
To configure World Time settings
Using World Time
You can use the World Time screen to select a time zone
and instantly change the time setting of the camera’s clock
when you go on a trip, etc. World Time lets you select one
of 162 cities in 32 time zones.
1. Press [MENU].
2. Select the “Set Up” tab, select “World Time”,
and then press [].
3. Use [] and [] to select “World”, and then
To display the World Time screen
press [].
1. Press [MENU].
4. Use [] and [] to
2. Select the “Set Up” tab, select “World Time”,
select “City”, and then
press [].
and then press [].
• To configure the summer
time setting, select
“DST”, and then select
either “On” or “Off”.
3. Use [] and [] to select “World”.
To do this:
Select this:
Display the time in your home time zone
Home
Display the time in the zone currently
selected on the World Time screen
World
• Summer time is used in some geographical areas to
advance the current time setting by one hour during
the summer months.
• Use of summer time depends on the local customs
and laws.
4. Press [SET] to exit the setting screen.
141
OTHER SETTINGS
5. Use [], [], [], and
Changing the Display Language
[] to select the
geographical area you
want, and then press
[SET].
You can use the following procedure to select one of ten
languages as the display language.
1. Press [MENU].
2. Select the “Set Up” tab, select “Language”,
6. Use [] and [] to select the city you want,
and then press [].
and then press [SET].
3. Use [], [], [], and [] to change the
7. When the setting is the way you want, press
setting, and then press [SET].
[SET] to apply it and exit the setting screen.
142
OTHER SETTINGS
• Mass Storage (USB DIRECT-PRINT) causes the
camera to see the computer as an external storage
device. Use this setting for normal transfer of images
from the camera to a computer (using the bundled
Photo Loader application).
• PTP (PictBridge) simplifies the transfer of image data
to the connected device.
Changing the USB Port Protocol
You can use the procedure below to change the
communication protocol of the camera’s USB port when
connecting to a computer, printer, or other external device.
Select the protocol that suits the device to which you are
connecting.
1. Press [MENU].
2. Select the “Set Up” tab, select “USB”, and
then press [].
3. Use [] and [] to select the setting you
want, and then press [SET].
When connecting to this type of
device:
Select this setting:
Computer or USB DIRECTPRINT-compatible printer (page
156)
Mass Storage (USB
DIRECT-PRINT)
PictBridge-compatible printer
(page 156)
PTP (PictBridge)*
* “PTP” stands for “Picture Transfer Protocol”.
143
OTHER SETTINGS
Configuring [ ] (REC) and [
Power On/Off Functions
] (PLAY)
You can use the following procedures to configure the [
(REC) and [
] (PLAY) so power turns and/or off
whenever they are pressed.
]
1. Press [MENU].
To configure this operation:
Select this setting:
Power turns on when [
] (REC) or
[
] (PLAY) is pressed (but does not
turn off)
Power On
Power turns on or off when [
]
(REC) or [
] (PLAY) is pressed
Power On/Off
Power does not turn on or off when
[
] (REC) or [
] (PLAY) is
pressed
Disable
2. Select the “Set Up” tab, select “REC/PLAY”,
and then press [].
IMPORTANT!
• When “Power On/Off” is selected, pressing [
]
(REC) in a REC mode or [
] (PLAY) in the PLAY
mode turns off the camera.
• Pressing [
] (REC) in the PLAY mode switches to
the currently selected recording mode, and pressing
[
] (PLAY) in a REC mode switches to the PLAY
mode.
3. Use [] and [] to select the setting you
want, and then press [SET].
NOTE
• The initial default setting is “Power On”.
144
OTHER SETTINGS
4. Use [] and [] to select “Format”, and then
Formatting Built-in Memory
press [SET].
Formatting built-in memory deletes any data stored in it.
• To exit the format operation without formatting,
select “Cancel”.
IMPORTANT!
• Note that data deleted by a format operation cannot
be recovered. Check to make sure you do not need
any of the data in memory before you format it.
• Formatting built-in memory deletes the following.
— Protected images
— FAVORITE folder images
— BESTSHOT mode user setups
— Startup screen image
— Power down image
1. Check to make sure there is no memory card
loaded in the camera.
• If there is a memory card loaded in the camera,
remove it (page 148).
2. Press [MENU].
3. Select the “Set Up” tab, select “Format”, and
then press [].
145
USING A MEMORY CARD
USING A MEMORY CARD
You can expand the storage
capabilities of your camera by using
a commercially available memory
card (SD memory card or
MultiMediaCard). You can also
copy files from built-in flash
memory to a memory card and from
a memory card to flash memory.
IMPORTANT!
• Use only an SD memory card or a MultiMediaCard
with this camera. Proper operation is not guaranteed
when any other type of card is used.
• See the instructions that come with the memory card
for information about how to use it.
• Certain types of cards can slow down processing
speeds.
• SD memory cards have a write protect switch, which
you can use to protect against accidental deletion of
image data. Note, however, if you write protect an
SD memory card, you must remove write protection
whenever you want to record to it, format it, or delete
any of its files.
• Electrostatic charge, digital noise, and other
phenomena can cause data to become corrupted or
even lost. Always maintain backup copies of
important data on other media (CD-R, CD-RW, MO
disc, computer hard disk, etc.)
• Normally, files are stored in built-in flash memory. When
you insert a memory card, however, the camera
automatically stores files to the card.
• Note that you cannot save files to built-in memory while a
memory card is installed in the camera.
146
USING A MEMORY CARD
2. Positioning the memory
Using a Memory Card
card so its back is facing in
the same direction as the
camera’s monitor screen,
carefully slide it into the
card slot. Slide the card all
the way in until you hear it
click securely into place.
IMPORTANT!
• Make sure you turn off the camera before inserting or
removing a memory card.
• Be sure to orient the card correctly when inserting it.
Never try to force a memory card into the slot when
you feel resistance.
To insert a memory card into the camera
1. Slide the battery cover in
the direction indicated by
the arrow, and then swing it
open.
Front
3. Swing the battery cover
closed, and then slide it in
the direction indicated by
the arrow.
147
Back
USING A MEMORY CARD
To remove a memory card from the
camera
Formatting a Memory Card
Formatting a memory card deletes any data already stored
on it.
1. Press the memory card into
IMPORTANT!
the camera and then release
it. This will cause the card to
come part way out of the
camera.
• Be sure to use the camera to format a memory card.
Formatting a memory card on a computer and then
using it in the camera can slow down data
processing by the camera. In the case of an SD card,
formatting on a computer can result in nonconformity with the SD format, causing problems with
compatibility, operation, etc.
• Note that data deleted by a memory card format
operation cannot be recovered. Check to make sure
you do not need any of the data on the memory card
before you format it.
• Formatting a memory card that contains files deletes
all the files, even those that are protected (page
128).
2. Pull the memory card out of the slot.
IMPORTANT!
• Never insert any other object besides a memory card
into the camera’s card slot. Doing so creates the risk
of damage to the camera and card.
• Should water or any foreign object ever get into the
card slot, immediately turn off the camera, remove
the battery, and contact your dealer or nearest
CASIO authorized service center.
• Never remove a card from the camera while the
green operation lamp is flashing. Doing so can cause
the file save operation to fail, and even damage the
memory card.
148
USING A MEMORY CARD
■ To format a memory card
■ Memory Card Precautions
• If a memory card starts to behave abnormally, you can
restore normal operation by reformatting it. However, we
recommend that you always take along more than one
memory card whenever using the camera far away from
the home or office.
• We recommend that you format a memory card before
using it for the first time after purchasing it, or whenever
the card you are using seems to be the cause of
abnormal images.
• As you record data to and delete data from an SD
memory card a number of times, it loses its ability to
retain data. Because of this, periodic re-formatting of an
SD memory card is recommended.
• Before starting a format operation, check to make sure
that the battery is fully charged. Power interruption during
the format operation can result in improper formatting,
and even damage the memory card and make it
unusable.
1. Load the memory card into the camera.
2. Turn on the camera, and press [MENU].
3. Select the “Set Up” tab, select “Format”, and
then press [].
4. Use [] and [] to select “Format”, and then
press [SET].
• To exit the format operation without formatting,
select “Cancel”.
149
USING A MEMORY CARD
4. Use [] and [] to select “Built-in
Copying Files
Card”,
and then press [SET].
Use the procedures below to copy files between built-in
memory and a memory card.
• This starts the copy operation and displays the
message “Busy.... Please wait...”.
• After the copy operation is complete, the monitor
screen shows the last file in the folder.
IMPORTANT!
• Only snapshot, movie files, audio snapshot, and
voice recording files recorded with this camera can
be copied. Other files cannot be copied.
• Files in the FAVORITE folder cannot be copied.
• Copying an audio snapshot copies both its image file
and the audio file.
To copy all the files in built-in memory to
a memory card
1. Load the memory card into the camera.
2. Turn on the camera. Next, enter the PLAY
mode and press [MENU].
3. Select the “PLAY” tab,
select “Copy”, and
then press [].
150
USING A MEMORY CARD
NOTE
To copy a specific file from a memory
card to built-in memory
• Files are copied to the folder in built-in memory
whose name has the largest number.
1. Perform steps 1 through 3 of the procedure
under “To copy all the files in built-in memory
to a memory card”.
2. Use [] and [] to select “Card
Built-in”,
and then press [SET].
3. Use [] and [] to select the file you want to
copy.
4. Use [] and [] to select “Copy”, and then
press [SET].
• This starts the copy operation and displays the
message “Busy.... Please wait...”.
• The file reappears on the monitor screen after the
copy operation is complete.
• Repeat steps 3 through 4 to copy other images, if
you want.
5. Press [MENU] to exit the copy operation.
151
PRINTING IMAGES
PRINTING IMAGES
■ Printing Directly on a Printer Equipped with
a Card Slot, or a Printer that Supports USB
DIRECT-PRINT or PictBridge
A digital camera provides you with a variety of different
ways to print the images it records. The three main printing
methods are described below. Use the method that best
suits your needs.
After using the camera’s DPOF feature to specify the
images you want to print and how many copies of each
should be printed, you can plug the memory card into a
printer equipped with a card slot, or connect the camera to
a PictBridge or USB DIRECT-PRINT printer for printing.
For more information, see “DPOF” (page 153) and “Using
PictBridge or USB DIRECT-PRINT” (page 156).
■ Professional Print Service
The camera’s DPOF feature lets you specify which images
you want to print and how many copies of each you want.
For more information, see “DPOF” (page 153).
NOTE
• Certain print service providers may not support
DPOF or may support different printing protocols. In
this case, use the protocol supported by your print
service to specify the images you want to have
printed.
152
PRINTING IMAGES
■ Printing with a Computer
DPOF
Windows Users
The camera comes bundled with Photo Loader and
Photohands applications (page 184), which can be installed
on a Windows computer for image transfer, management,
and printing. For more information, see “Viewing Images on
a Computer” (page 160) and “Installing the Software from
the CD-ROM” (page 183).
The letters “DPOF” stand for “Digital Print
Order Format”, which is a format for
recording on a memory card or other medium
which digital camera images should be
printed and how many copies of the image
should be printed. Then you can print on a
DPOF-compatible printer or at a professional
print service in accordance with the file name
and number of copies settings recorded on
the card.
With this camera, you can select images by viewing them
on the monitor screen without needing to remember file
names, their locations in memory, etc.
Macintosh Users
The camera comes bundled with Photo Loader for the
Macintosh, which can be installed for image transfer and
management, but not for printing. Use commercially
available software for printing with a Macintosh. For more
information, see “Viewing Images on a Computer” (page
160) and “Installing the Software from the CD-ROM” (page
183).
■ DPOF Settings
File Name,
number of copies,
date
153
PRINTING IMAGES
5. Use [] and [] to specify the number of
To configure print settings for a single
image
copies.
• You can specify up to 99 for the number of copies.
Specify 00 if you do not want to have the image
printed.
1. In the PLAY mode, press [MENU].
2. Select the “PLAY” tab,
6. To turn on date stamping for the prints, press
select “DPOF”, and
then press [].
[DISP] so
•
12
1
12
1
is displayed.
indicates that date stamping is turned on.
• To turn off date stamping for the prints, press [DISP]
so
is not displayed.
12
1
• Repeat steps 4 through 6 if you want to configure
other images for printing.
3. Use [] and [] to select “Select images”,
and then press [].
7. After all the settings are the way you want,
press [SET] to apply them.
4. Use [] and [] to
display the image you
want.
154
PRINTING IMAGES
5. To turn on date stamping for the prints, press
To configure print settings for all images
[DISP] so
12
1
is displayed.
1. In the PLAY mode, press [MENU].
•
2. Select the “PLAY” tab, select “DPOF”, and
• To turn off date stamping for the prints, press [DISP]
so
is not displayed.
12
1
indicates that date stamping is turned on.
12
1
then press [].
6. After all the settings are the way you want,
3. Use [] and [] to select “All images”, and
press [SET] to apply them.
then press [].
IMPORTANT!
4. Use [] and [] to
• If you take a memory card to a professional print
service, be sure to tell them that it includes DPOF
settings for the images to be printed and the number
of copies. If you don’t, they may print all images on
the card, including the ones you do not want printed.
• Note that some professional print services do not
support DPOF printing. Check with your service
before ordering prints.
• Some printers may have settings that disable date
stamp and/or DPOF printing. See the user
documentation that comes with your printer for
details about how to enable these features.
specify the number of
copies.
• You can specify up to 99
for the number of copies.
Specify 00 if you do not
want to have the image
printed.
155
PRINTING IMAGES
1. Press [MENU].
Using PictBridge or USB DIRECT-PRINT
2. Select the “Set Up” tab, select “USB”, and
You can connect the camera
directly to a printer that supports
PictBridge or USB DIRECT-PRINT,
and perform image selection and
printing using the camera monitor
screen and controls. DPOF support
(page 153) also lets you specify
which images you want to print and
how many copies of each should be
printed.
• PictBridge is a standard
established by the Camera and
Imaging Products Association
(CIPA).
• USB DIRECT-PRINT is a
standard proposed by Seiko
Epson Corporation.
then press [].
3. Use [] and [] to select the setting you
want, and then press [SET].
When connecting to this type of
device:
Select this setting:
Computer or USB DIRECTPRINT-compatible printer
Mass Storage (USB
DIRECT-PRINT)
PictBridge-compatible printer
PTP (PictBridge)
• Mass Storage (USB DIRECT-PRINT) causes the
camera to see the computer as an external storage
device. Use this setting for normal transfer of images
from the camera to a computer (using the bundled
Photo Loader application).
• PTP (PictBridge) simplifies the transfer of image data
to the connected device.
156
PRINTING IMAGES
4. Use the USB cable that comes with the
8. Press the USB
camera to connect the USB cradle to a printer.
cradle’s [USB] button.
• This displays the print
menu on the camera’s
monitor screen.
USB
9. Use [] and [] to select “Paper Size”, and
then press [].
• Also, connect the AC adaptor to the USB cradle and
plug the AC adaptor into an electrical outlet.
10. Use [] and [] to select the paper size you
want to use for printing, and then press [SET].
• If you are using battery power without the AC
adaptor, make sure that the battery is fully charged.
• The following are the print sizes that are available.
3.5˝ × 5˝
5˝ × 7˝
4˝ × 6˝
A4
8.5˝ × 11˝
By Printer
5. Set the camera on the USB cradle.
6. Turn on the printer.
7. Load paper for printing the images into the
• Selecting “By Printer” prints using the paper size
selected on the printer.
printer.
• Available paper size settings depend on the
connected printer. For full details, see the
instructions that come with your printer.
157
PRINTING IMAGES
11. Use [] and [] to
13. After you are finished printing, press the USB
specify the print option
you want.
cradle’s [USB] button, and then turn off the
camera.
• To print a single image:
Select “1 Image” and then
press [SET]. Next, use
[] and [] to select the
image you want to print.
■ Printing Precautions
• See the documentation that comes with your printer for
information about print quality and paper settings.
• Contact your printer manufacturer for information about
models that support PictBridge and USB DIRECT-PRINT,
upgrades, etc.
• Never disconnect the USB cable, or perform any camera
or USB cradle operation while printing is in progress.
Doing so causes a printer error.
• To print all images: Select “DPOF”, and then press
[SET].
• You can toggle date stamping of the image on and
icon indicates that
off by pressing [DISP]. The
date stamping is turned on.
12
1
12. On the camera’s monitor screen, use [] and
[] to select “Print”, and then press [SET].
• This starts printing and displays the message
“Busy.... Please wait...” on the monitor screen. The
message will disappear after a short while, even
though printing is still being performed. Pressing any
of the camera’s buttons while printing is in progress
will cause the message to reappear.
• The print menu will appear when printing is
complete.
• If you selected “1 Image” in step 11, you can select
another image for printing and then repeat this step
to print.
158
PRINTING IMAGES
PRINT Image Matching III
Exif Print
Images include PRINT Image Matching
III data (mode setting and other camera
setup information). A printer that
supports PRINT Image Matching III
reads this data and adjusts the printed
image accordingly, so your images
come out just the way you intended
when you recorded them.
Exif Print is an
internationally supported,
open standard file format
that makes it possible to
capture and display vibrant
digital images with accurate
colors. With Exif 2.2, files
include a wide range of
shooting condition
information that can be
interpreted by an Exif Print
printer to produce betterlooking prints.
* Seiko Epson Corporation holds the
copyright for PRINT Image Matching and
PRINT Image Matching III.
IMPORTANT!
• Information about the availability of Exif Print
compatible printer models can be obtained from each
printer manufacturer.
159
VIEWING IMAGES ON A COMPUTER
VIEWING IMAGES ON A COMPUTER
After using the USB cradle to establish a USB connection
between the camera and your computer, you can use your
computer to view images in file memory and copy images
to your computer’s hard disk or other storage media. In
order to do this, you first need to install the USB driver
located on the CD-ROM (CASIO Digital Camera Software)
that comes bundled with the camera onto your computer.
Note that the procedure you need to perform depends on
whether you are using computer running under Windows
(see below) or a Macintosh (see page 166).
Using the Camera with a Windows
Computer
The following are the general steps for viewing and copying
files from a computer running under Windows. You can find
details about each operation in the procedures that follow
below. Note that you should also refer to the
documentation that comes with your computer for other
information about USB connections, etc.
1. If you are running Windows 98, Me, or 2000, install
the USB driver onto your computer.
• You need to perform this step only once, the first
time you connect to your computer.
• If you are running Windows XP, you do not need to
install the USB driver.
2. Use the USB cradle to establish a connection between
the camera and computer.
3. View and copy the images you want.
160
VIEWING IMAGES ON A COMPUTER
1. What you should do first depends on whether
IMPORTANT!
your computer is running under Windows 98,
Me, 2000, or XP.
• Low battery power can cause the camera to power
down suddenly during data communication. Use of
the special AC adaptor is recommended to power the
camera during data communication.
• If you are using battery power without the AC
adaptor, make sure that the battery is fully charged.
• If you want to transfer files from the camera’s built-in
memory to a computer, make sure there is no
memory card loaded in the camera before you place
it onto the USB cradle.
■ Windows 98/Me/2000 Users
• Start from step 2 to install the USB driver.
• Note that the example installation presented here
uses Windows 98.
■ Windows XP Users
• Installation of the USB driver is not required, so jump
directly to step 6.
Do not try to establish a connection between the
camera and computer before installing the USB
driver onto the computer. If you do, the computer will
not be able to recognize the camera.
• USB driver installation is required in the case of
Windows 98, Me, and 2000. Do not connect the
camera to a computer running one of the above
operating systems without installing the USB driver
first.
• USB driver installation is not required in the case of
Windows XP.
2. Set the bundled CD-ROM (CASIO Digital
Camera Software) into the CD-ROM drive of
your computer.
3. On the menu screen that appears, click
“English”.
4. Click [USB driver] and then [Install].
• This starts installation.
• The following steps show installation under the
English version of Windows.
161
VIEWING IMAGES ON A COMPUTER
5. On the screen that appears after installation
is complete, select the “Yes, I want to restart
my computer now.” check box and then click
[Finish] to restart your computer.
• Note that you should leave the bundled CD-ROM in
your computer’s CD-ROM drive when you restart.
[DC IN 5.3V]
6. Connect the bundled AC adaptor to the [DC IN
5.3V] connector of the USB cradle, and then
plug it in to a household power outlet.
• If you are using battery power without the AC
adaptor, make sure that the battery is fully charged.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• Note that the shape of the AC adaptor depends on
the area where you purchased the camera.
[DC IN 5.3V]
162
VIEWING IMAGES ON A COMPUTER
7. Connect the USB cable that comes bundled
8. Press the camera’s power button to turn it on,
with the camera to the USB cradle and your
computer’s USB port.
USB port
USB cable
(bundled)
and then press its [MENU] button.
9. Select the “Set Up” tab, select “USB”, and
then press [].
Connector B
10. Use [] and [] to select “Mass Storage (USB
DIRECT-PRINT)”, and then press [SET].
Connector A
11. Turn off the camera.
12. Place the camera onto the USB cradle.
• Do not place the camera onto the USB cradle while it
is turned on.
[USB]
• Take care when connecting the USB cable to the
USB cradle or your computer. USB ports and cable
plugs are shaped for proper positioning.
• Plug the USB cable plugs into the ports securely, as
far as they will go. Proper operation is not possible if
connections are not correct.
163
VIEWING IMAGES ON A COMPUTER
13. Press the USB cradle’s [USB] button.
14. On your computer, double-click “My
Computer”.
• This will cause the “Add New Hardware...” dialog box
to appear on the computer screen as the computer
automatically detects the camera’s file memory. After
you install the USB driver, “Add New Hardware...”
dialog box will no longer appear when you perform
the above steps to establish a USB connection.
• If you are running Windows XP, click [Start] and then
[My Computer].
15. Double-click “Removable Disk”.
• Your computer sees the camera’s file memory as a
removable disk.
• Pressing the [USB] button enters the USB mode,
which causes the USB cradle’s [USB] lamp to light
green (page 197).
16. Double-click the “Dcim” folder.
• At this point, some operating systems will display a
“Removable Disk” dialog box. If your operating
system does, close the dialog box.
17. Double-click the folder that contains the
image you want.
18. Double-click the file that contains the image
you want to view.
• For information about file names, see “Memory
Folder Structure” on page 172.
19. Depending on your operating system, perform
one of the following procedures to save the
files, if you want.
[USB] button
[USB] lamp
164
VIEWING IMAGES ON A COMPUTER
■ Windows 98, 2000, Me
IMPORTANT!
1. In the camera’s file memory (Removable Disk), rightclick the “Dcim” folder.
• Never use your computer to edit, delete, move, or
rename images stored in the camera’s file memory.
Doing so can cause problems with the image
management data used by the camera, which may
make it impossible to display images on the camera
or it may cause large error in the number of images
value displayed by the camera. Always copy images
to your computer before performing any edit, delete,
move, or rename operation.
2. On the shortcut menu that appears, click [Copy].
3. Double click [My Documents] to open it.
4. On the My Documents [Edit] menu, click [Paste].
• This copies the “Dcim” folder (which contains the
image files) to your “My Documents” folder.
■ Windows XP
20. Depending on the version of Windows you are
1. In the camera’s file memory (Removable Disk), rightclick the “Dcim” folder.
running, use one of the following procedures
to terminate the USB connection.
2. On the shortcut menu that appears, click [Copy].
■ Windows Me/98/XP Users
3. Click [Start] and then [My Documents].
• After pressing the USB cradle’s [USB] button and
making sure that the [USB] lamp is not lit, remove
the camera from the USB cradle.
4. On the My Documents [Edit] menu, click [Paste].
• This copies the “Dcim” folder (which contains the
image files) to your “My Documents” folder.
■ Windows 2000 Users
• Click card services in the task tray on your computer
screen, and disable the drive number assigned to the
camera. After pressing the USB cradle’s [USB]
button and making sure that the [USB] lamp is not lit,
remove the camera from the USB cradle.
165
VIEWING IMAGES ON A COMPUTER
■ USB Connection Precautions
Using the Camera with a Macintosh
Computer
• Do not leave the same image displayed on your computer
screen for a long time. Doing so can cause the image to
“burn in” on the screen.
• Never disconnect the USB cable, or perform any camera
or USB cradle operation while data communication is in
progress. Doing so can cause data to become corrupted.
The following are the general steps for viewing and copying
files from a Macintosh.
You can find details about each operation in the
procedures that follow below. Note that you should also
refer to the documentation that comes with your Macintosh
for other information about USB connections, etc.
IMPORTANT!
• This camera does not support operation on a
computer running Mac OS 8.6 or lower, or Mac OS X
10.0. If you have a Macintosh running Mac OS 9 or
OS X (10.1, 10.2 or 10.3), use the standard USB
driver that comes with your OS.
1. Use the USB cradle to establish a connection between
the camera and your Macintosh.
2. View and copy the images you want.
166
VIEWING IMAGES ON A COMPUTER
IMPORTANT!
• If you want to transfer files from the camera’s built-in
memory to a computer, make sure there is no
memory card loaded in the camera before you place
it onto the USB cradle.
[DC IN 5.3V]
1. Connect the bundled AC adaptor to the [DC IN
5.3V] connector of the USB cradle, and then
plug it in to a household power outlet.
• If you are using battery power without the AC
adaptor, make sure that the battery is fully charged.
• Note that the shape of the AC adaptor depends on
the area where you purchased the camera.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
[DC IN 5.3V]
167
VIEWING IMAGES ON A COMPUTER
2. Connect the USB cable that comes bundled
3. Press the camera’s power button to turn it on,
with the camera to the USB cradle and your
computer’s USB port.
USB port
USB cable
(bundled)
and then press its [MENU] button.
4. Select the “Set Up” tab, select “USB”, and
then press [].
Connector B
5. Use [] and [] to select “Mass Storage (USB
DIRECT-PRINT)”, and then press [SET].
6. Turn off the camera.
Connector A
7. Place the camera onto the USB cradle.
• Do not place the camera onto the USB cradle while it
is turned on.
[USB]
• Take care when connecting the USB cable to the
USB cradle or your computer. USB ports and cable
plugs are shaped for proper positioning.
• Plug the USB cable plugs into the ports securely, as
far as they will go. Proper operation is not possible if
connections are not correct.
[USB] button
[USB] lamp
168
VIEWING IMAGES ON A COMPUTER
8. Press the USB cradle’s [USB] button.
12. To copy all the files in file memory to your
Macintosh hard disk, drag the “DCIM” folder
to the folder to which you want to copy it.
• Pressing the [USB] button enters the USB mode,
which causes the USB cradle’s [USB] lamp to light
green (page 197).
IMPORTANT!
9. Your Macintosh will see the camera’s file
• Never use your computer to edit, delete, move, or
rename images stored in the camera’s file memory.
Doing so can cause problems with the image
management data used by the camera, which may
make it impossible to display images on the camera
or it may cause large error in the number of images
value displayed by the camera. Always copy images
to your computer before performing any edit, delete,
move, or rename operation.
memory as a drive.
• The appearance of the drive icon depends on the
Mac OS version you are using.
• After installing the USB driver, your Macintosh will
see the camera’s file memory as a drive whenever
you establish a USB connection between them.
10. Double-click the drive icon for the camera’s
file memory, the “DCIM” folder, and then the
folder that contains the image you want.
13. To terminate the USB connection, drag the
drive icon that represents the camera to
Trash.
11. Double-click the file that contains the image
you want to view.
14. Press the USB cradle’s [USB] button. After
• For information about file names, see “Memory
Folder Structure” on page 172.
making sure the [USB] lamp is not lit, remove
the camera from the USB cradle.
169
VIEWING IMAGES ON A COMPUTER
■ USB Connection Precautions
Operations You Can Perform from Your
Computer
• Do not leave the same image displayed on your computer
screen for a long time. Doing so can cause the image to
“burn in” on the screen.
• Never disconnect the USB cable, or perform any camera
or USB cradle operation while data communication is in
progress. Doing so can cause data to become corrupted.
The following are the operations you can perform while
there is a USB connection between your camera and
computer. See the referenced pages for more information
about each operation.
• View images in album format
.... See “Using the Album Feature” on page 175.
• Print images in album format
.... See “Using the Album Feature” on page 175.
• Automatically transfer images to your computer and
manage images
.... See “Installing the Software from the CD-ROM” on
page 183 for information about installing Photo
Loader.
• Retouch images
.... See “Installing the Software from the CD-ROM” on
page 183 for information about installing Photohands.
170
VIEWING IMAGES ON A COMPUTER
Using a Commercially Available SD Memory Card
Reader/Writer
See the user documentation that comes with the SD
memory card reader/writer for details about how to use it.
Using a Memory Card to Transfer Images
to a Computer
The procedures in this section describe how to transfer
images from the camera to your computer using a memory
card.
Using a Computer with a Built-in SD Memory Card Slot
Insert the SD memory card directly into the slot.
Using a Computer with a Built-in PC Card Slot
Use a commercially available PC card adaptor (for an SD
memory card or MMC). For full details, see the user
documentation that comes with the PC card adaptor and
your computer.
Using a Commercially Available PC Card Reader/Writer
and PC Card Adaptor (for an SD memory card or MMC)
See the user documentation that comes with the PC card
reader/writer and PC card adaptor for details about how to
use them.
171
VIEWING IMAGES ON A COMPUTER
Memory Folder Structure
Memory Data
Images recorded with this camera and other data are
stored in memory using DCF (Design rule for Camera File
system) protocol. DCF protocol is designed to make it
easier to exchange image and other data between digital
cameras and other devices.
■ Folder Structure
DCIM
100CASIO
CIMG0001.JPG
CIMG0002.AVI
CIMG0003.WAV
CIMG0004.JPG
CIMG0004.WAV
(Storage folder)
(Image file)
(Movie file)
(Audio file)
(Audio snapshot image file)
(Audio snapshot audio file)
101CASIO
102CASIO
(Storage folder)
(Storage folder)
ALBUM
INDEX.HTM
(Album folder)
(Album HTML file)
...
DCF Protocol
(DCIM Folder)
...
DCF devices (digital cameras, printers, etc.) can exchange
images with each other. DCF protocol defines a format for
image file data and the folder structure for file memory, so
images can be viewed using another manufacturer’s DCF
camera or printed on a DCF printer.
...
FAVORITE *
...
CIMG0001.JPG
CIMG0002.JPG
MISC
(FAVORITE folder)
(Storage file)
(Storage file)
(DPOF file folder)
AUTPRINT.MRK
SCENE*
(DPOF file)
(BESTSHOT folder)
...
UEZ50001.JPE
UEZ50002.JPE
(User setup file)
(User setup file)
* These folders are created in built-in memory only.
172
VIEWING IMAGES ON A COMPUTER
■ Folder and File Contents
• FAVORITE folder
Folder that contains Favorites image files
(Image Size: 320 × 240 pixels)
• DCIM folder
Folder that stores all of the digital camera files
• DPOF file folder
Folder that contains DPOF files
• Storage folder
Folder for storing files created by the digital camera
• BESTSHOT folder (Built-in memory only)
Folder that contains BESTSHOT user setup files
• Image file
File that contains an image recorded with the digital
camera (File Name Extension: JPG)
• User setup files (Built-in memory only)
Files that contain BESTSHOT user setups
• Movie file
File that contains a movie recorded with the digital
camera (File Name Extension: AVI)
• Audio file
File that contains an audio recording (File Name
Extension: WAV)
• Audio snapshot image file
File that contains the image part of an audio snapshot
(File Name Extension: JPG)
• Audio snapshot audio file
File that contains the audio part of an audio snapshot
(File Name Extension: WAV)
• Album folder
Folder that contains files used by the album function
• Album HTML file
File used by the album function
(File Name Extension: HTM)
173
VIEWING IMAGES ON A COMPUTER
■ Built-in Memory and Memory Card
Precautions
Image Files Supported by the Camera
• Image files recorded with this camera
• DCF protocol image files
• Note that the folder named “DCIM” is the parent (top)
folder of all the files in memory. When transferring
memory contents to a hard disk, CD-R, MO disk, or other
external storage, treat all the contents inside a DCIM
folder as a set and always keep them together. You can
change the name of the DCIM folder on your computer.
Changing the name to a date is a good way to keep track
of multiple DCIM folders. However, if you even want to
copy the folders back to the camera’s file memory, be
sure you change the name of the DCIM folder back to
“DCIM” first. The camera does not recognize any folder
name other than DCIM.
Certain DCF functions may not be supported. When
displaying an image recorded on another camera model, it
may take a long time for the image to appear on the
display.
174
USING THE CAMERA WITH A COMPUTER
USING THE CAMERA WITH A COMPUTER
The album feature of the camera creates files that make it
possible for you to view images on your computer in a
photo album layout. You can also use the applications
contained on the CD-ROM that comes bundled with the
camera to automate image transfer and to retouch images.
• You can use the Web browser shown below to view or
print the contents of an album. Note that to view a movie
on a computer running Windows 2000 or 98, you need to
install DirectX from the bundled CD-ROM.
Microsoft Internet Explorer Ver 5.5 or later
Using the Album Feature
Creating an album
The album feature creates an HTML photo album layout
that displays your images. You can use the HTML layout to
post your images on a Web page, or for printing the
images.
IMPORTANT!
• Remember that creating an “ALBUM” folder (page
173) causes different size versions of each image to
be created in memory. If there is an “ALBUM” folder
in image memory when you specify printing of all
images by a professional print service or on a printer,
you may end up with unwanted multiple prints of the
same image. To avoid this problem, use the
procedure under “To delete an album” on page 183
to delete the ALBUM folder.
Album
Index
Info
175
USING THE CAMERA WITH A COMPUTER
■ To create an album
IMPORTANT!
• Never open the battery cover or remove the memory
card from the camera while an album is being
created. Doing so not only runs the risk of certain
album files being skipped, it can also result in image
data and other data in memory being corrupted.
• If memory becomes full while an album is being
created, the message “Memory Full” appears on the
monitor screen and album creation is terminated.
• Album creation will not be performed properly if the
battery goes dead while album creation is in
progress.
• Pressing [SET] in step 3 of the above procedure
creates an album regardless of whether auto album
creation is turned on or off (page 179).
• Images in the “ALBUM” folder (page 173) cannot be
viewed on the camera’s monitor screen.
1. In the PLAY mode, press [MENU].
2. Select the “PLAY” tab,
select “Create
Album”, and then
press [].
Sample layout
3. Use [] and [] to select “Create”, and then
press [SET].
• This starts creation of the album, and causes the
message “Busy.... Please wait...”. to appear on the
monitor screen.
• The PLAY mode screen reappears after creation of
the album is complete.
• Creating an album causes a file folder named
“ALBUM”, which contains a file named “INDEX.HTM”
plus other files to be created in camera memory or
on the memory card.
176
USING THE CAMERA WITH A COMPUTER
Selecting an Album Layout
Configuring Detailed Album Settings
You can select from among 10 different display layouts for
an album.
1. In the PLAY mode, press [MENU].
2. Select the “PLAY” tab, select “Create
1. In the PLAY mode, press [MENU].
Album”, and then press [].
2. Select the “PLAY” tab, select “Create
3. Use [] and [] to select “Set Up”, and then
Album”, and then press [].
press [].
3. Use [] and [] to select “Layout”.
4. Use [] and [] to
select the item whose
setting you want to
change, and then press
[].
4. Use [] and [] to select the layout you want.
• When you select a layout, the corresponding layout
sample appears on the right side of the screen.
• Details about each of the
settings are provided in
the following sections.
IMPORTANT!
• The sample layout shows the arrangement of items
and the background color only. It does not reflect any
of the detailed album settings you configure in the
following section.
5. Use [] and [] to change the setting, and
then press [SET].
177
USING THE CAMERA WITH A COMPUTER
■ Background Color
■ Image Use
You can specify white, black, or gray as the color of the
album background using the procedure under “Configuring
Detailed Album Settings”.
This setting lets you select from among three different
image uses, as described below. Select the image use that
best suits the way you plan to use the image.
■ Album Type
There are two album types: “Normal” and “Index/Info”.
“Normal” Type
: This type of album displays images in
accordance with the currently selected
layout.
“Index/Info” Type : In addition to the normal album screen,
this type of album also includes
thumbnails of images and detailed
information about each image.
178
For this purpose:
Select this
setting:
Smaller images for album browsing, Website
thumbnails, or archiving on a CD-R or other
media, with the full-size image displayed
when a thumbnail is clicked
• This setting can be used for browsing with
the thumbnails. Clicking a thumbnail
displays a larger version for viewing or
printing.
View
Small image files only for album browsing, or
uploading to a Website, etc.
• This option displays only the small-file
images (located in the camera’s “ALBUM”
folder). Smaller files upload to the Internet
faster.
• You cannot enlarge images by clicking a
thumbnail or play movies while this image is
selected.
WEB
Printing (high resolution)
• High-resolution images take longer to
display on your computer screen.
• You cannot enlarge images by clicking a
thumbnail or play movies while this image is
selected.
Print
USING THE CAMERA WITH A COMPUTER
■ Auto Album Creation On/Off
NOTE
• Depending on the number of images in memory, it
can take quite a bit of time to complete auto album
creation when you turn off the camera. If you do not
plan to use the album feature, we suggest that you
keep auto album creation turned off, which shortens
the amount of time the camera takes to power down
completely.
This setting controls whether an album is created
automatically whenever you turn off the camera.
To do this:
Select this option:
Turn on auto album creation
On
Turn off auto album creation
Off
• When auto album creation is turned on, an album is
created automatically in built-in memory or on the
memory card whenever you turn off the camera.
IMPORTANT!
• When you turn off the camera while auto album
creation is turned on, the monitor screen turns off,
but the green operation lamp continues to flash for a
few seconds to indicate that the album creation
process is being performed. Never open the battery
cover or remove the memory card while the green
operation lamp is flashing.
179
USING THE CAMERA WITH A COMPUTER
4. If you created the album after selecting
Viewing Album Files
“Index/Info” as the album type under
“Configuring Detailed Album Settings” on
page 177, you can click one of the following
display options.
You can view and print album files using your computer’s
Web browser application.
1. Use your computer to access the data in built-
Album : Displays an album created by the camera.
in memory or on the memory card, or access
a memory card with your computer (pages
160, 171).
Index : Displays a list of images stored in a folder.
Info
2. Open the built-in memory “ALBUM” folder or
• If “View” is selected for “Use” (page 178), you can
double-click an image on your computer screen to
display the full-size version.
the memory card “ALBUM” folder, which is
located inside the folder named “DCIM”.
3. Use your computer’s
: Displays information about each image.
Index/Info Album Type
Web browser to open
the file named
“INDEX.HTM”.
• This displays a list of
folders in built-in memory
or on the memory card.
Image
File Name
Album
180
USING THE CAMERA WITH A COMPUTER
• The following describes the information that appears
on the Info Screen.
This Info Screen item:
File Size
Resolution
Quality
Recording mode
AE
Light metering
Shutter speed
Aperture stop
Exposure comp
Focusing mode
AF Area
Flash mode
Sharpness
Saturation
Contrast
White balance
Sensitivity
Filter
Enhancement
Flash intensity
Digital zoom
World
Date
Model
Index
Info
181
Shows this:
Image file size
Resolution
Quality
Recording mode
Exposure mode
Metering mode
Shutter speed
Aperture stop
EV shift
Focusing mode
Auto Focus area
Flash mode
Sharpness
Saturation
Contrast
White balance
Sensitivity
Filter setting
Enhancement setting
Flash intensity
Digital zoom setting
Location
Recording date and time
Camera model name
USING THE CAMERA WITH A COMPUTER
NOTE
Saving an Album
• When printing an album page, you should set up
your Web browser as described below.
— Select the browser frame where the images are
located.
— Set margins to the lowest possible values.
— Set the background color to a printable color.
• See the user documentation that came with your
Web browser application for details about printing
and configuring settings for printing.
• Album contents (titles, comments, etc.) cannot be
edited on the camera. Use a commercially available
HTML file editor to edit album contents.
• To save an album, copy the “DCIM” folder from camera
memory or the memory card to your computer’s hard disk,
a CD-R, an MO disk, or some other storage medium.
Note that copying only the “ALBUM” folder, does not copy
image data and other necessary files.
• After copying the “DCIM” folder, do not change or delete
any of the files inside of it. Adding new images or deleting
existing images may lead to abnormal album display.
• If you plan to use a memory card again after saving its
album, first delete all of files or format it before loading it
into the camera.
• When you have “WEB” selected for the “Use” setting, the
album shows only the smaller image files stored in the
“ALBUM” folder. Such images can be uploaded to the
Internet more quickly.
5. After you are finished viewing the album, exit
your Web browser application.
182
USING THE CAMERA WITH A COMPUTER
To delete an album
Installing the Software from the CD-ROM
Your digital camera comes bundled with useful applications
for using it in combination with a computer. Install the
applications you need on your computer.
1. In the PLAY mode, press [MENU].
2. Select the “PLAY” tab, select “Create Album”,
and then press [].
About the bundled CD-ROM (CASIO
Digital Camera Software)
3. Use [] and [] to select “Delete”, and then
press [SET].
The CD-ROM (CASIO Digital Camera Software) that
comes bundled with the camera contains the applications
described below. Installation of these applications is
optional, and you should install only the ones you want to
use.
• This deletes the album and returns to the PLAY
mode screen.
USB Driver for Mass Storage (for Windows)
This is the software that makes it possible for the camera
to “talk” to your personal computer over a USB connection.
If you are using Windows XP, do not install the USB driver
from the CD-ROM. With Windows XP, you will be able to
perform USB communication simply by connecting the
camera to your computer with the USB cable.
183
USING THE CAMERA WITH A COMPUTER
DirectX (for Windows)
This software provides an extended tool set including a
codec that allows Windows 98 and 2000 to handle movie
files recorded using a digital camera. You do not need to
install DirectX if you are running Windows XP or Me.
Photo Loader (for Windows/Macintosh)
This application automatically transfers image, audio
snapshot, and voice recording WAV files from the camera
to your computer. Photo Loader automatically stores
transferred files in folders named using the current date
(year, month, day) and generates HTML files that make it
possible to view images using a web browser. Photo
Loader (Windows version only) also includes a feature that
simplifies the task of attaching images to e-mail.
Adobe Reader (for Windows)
This is an application that lets you read PDF files. Use it to
read the user documentation for the camera, Photo Loader,
and Photohands, all of which is included on the bundled
CD-ROM.
• See the user documentation file (PDF) on the bundled
“CASIO Digital Camera Software” CD-ROM for details
about using Photo Loader.
• See the user documentation files (PDF) on the bundled
CD-ROM for details about using Photo Loader and
Photohands. See “Viewing User Documentation (PDF
files)” on page 188 (Windows) and page 190 (Macintosh)
of this manual for more information.
Photohands (for Windows)
Photohands includes retouching tools for adjusting image
color, contrast, and brightness, for resizing images, and for
changing image orientation. You can also use Photohands
for printing images and for adding a date stamp to printed
images.
• See the user documentation file (PDF) on the bundled
“CASIO Digital Camera Software” CD-ROM for details
about using Photohands.
184
USING THE CAMERA WITH A COMPUTER
Macintosh
Computer System Requirements
Computer system requirements depend on each of the
applications, as described below.
Photo Loader
Windows
USB Driver*
OS
1
XP*2/2000/Me/
98
Photo Loader
Photohands
XP/2000/Me/98
XP/2000/Me/98
Memory
–
At least 16MB
At least 64MB
HD
–
At least 7MB
At least 10MB
OS
9
Memory
At least 32MB
HD
At least 3MB
• USB connection is supported on a Macintosh running OS 9, 10.1,
10.2 or 10.3. Operation is supported using the standard USB
driver that comes with the operating system, so all you need to do
is connect the camera to your Macintosh using the USB cable.
*1 In the case of Windows 2000, you need to install a data file that
enables use of the operating system’s standard USB driver. You
do not need to install a special USB driver. Proper operation is
not guaranteed on a computer that has been upgraded from
Windows 95 or 3.1 to Windows Me or 98, or from Windows 95 or
NT to Windows 2000.
*2 With Windows XP, use the USB driver that comes with the
operating system. You do not need to install the USB driver that
comes with the camera.
185
USING THE CAMERA WITH A COMPUTER
IMPORTANT!
Installing Software from the CD-ROM in
Windows
• For details about Windows minimum system
requirements, see the “Readme” file on the CD-ROM
(CASIO Digital Camera Software) that comes
bundled with the camera.
• For details about Macintosh minimum system
requirements, use a Web browser application to read
the contents of the “readme” file on the CD-ROM
(CASIO Digital Camera Software) that comes
bundled with the camera.
• The software on the CD-ROM (CASIO Digital
Camera Software) that comes bundled with the
camera does not support operation under Mac OS X
(10.0).
Use the procedures in this section to install the software
from the bundled CD-ROM (CASIO Digital Camera
Software) to your computer.
NOTE
• If you already have one of the bundled applications
installed on your computer, check its version. If the
bundled version is newer than the one you have,
uninstall the old version and then install the newer
version.
The CD-ROM (CASIO Digital Camera Software) includes
the software and user documentation for various
languages. Check the CD-ROM menu screen to see if
applications and user documentation are available for a
particular language.
186
USING THE CAMERA WITH A COMPUTER
Getting Started
Viewing the Contents of the “Read me”
File
Start up your computer and insert the CD-ROM into its CDROM drive. This will automatically launch the menu
application, which displays a menu screen on your
computer.
You should always read the “Read me” file for any
application before installing it. The “Read me” file contains
information you need to know when installing the
application.
• The menu application may not start up automatically on
some computers. If this happens, navigate to the CDROM and double-click “menu.exe” to launch the menu
application.
1. Click the “Read me” button for the application
you are going to install.
IMPORTANT!
Selecting a Language
• Before upgrading or reinstalling Photo Loader, or
before installing it onto another computer, be sure to
read the “Read me” file for information about
retaining existing libraries.
First select a language. Note that some software is not
available in all languages.
1. On the menu screen, click the tab for the
language you want.
187
USING THE CAMERA WITH A COMPUTER
Installing an Application
Viewing User Documentation (PDF Files)
1. Click the “Install” button for the application
1. In the “Manual” area, click the name of the
you want to install.
manual you want to read.
2. Follow the instructions that appear on your
IMPORTANT!
computer screen.
• You need to have Adobe Reader installed on your
computer to read user documentation files. If you do
not already have Adobe Reader installed, you can
install it from the bundled CD-ROM.
IMPORTANT!
• Be sure to follow the instructions carefully and
completely. If you make a mistake when installing
Photo Loader, you may not be able to browse your
existing library information and HTML files that are
created automatically by Photo Loader. In some
cases, image files may be lost.
• When using an operating system other than
Windows XP, never connect the camera to your
computer without installing the USB driver from the
CD-ROM first.
188
USING THE CAMERA WITH A COMPUTER
User Registration
Installing Software from the CD-ROM on a
Macintosh
You can perform user registration over the Internet. To do
so, of course, you need to be able to connect to the
Internet with your computer.
Use the procedures in this section to install the software
from the bundled CD-ROM (CASIO Digital Camera
Software) to your computer.
1. Click the “Register” button.
Installing Software
• This starts up your Web browser and accesses the
user registration website. Follow the instructions that
appear on your computer screen to register.
Use the following procedures to install the software.
Exiting the Menu Application
1. On the menu screen, click “Exit” to exit the
menu.
189
USING THE CAMERA WITH A COMPUTER
■ To install Photo Loader
Viewing User Documentation (PDF Files)
To perform the following procedures, you must have Adobe
Reader installed on your Macintosh. You can download the
latest version of Adobe Reader by visiting the Adobe
Systems website.
1. Open the folder named “Photo Loader”.
2. Open the folder named “English”, and then
open the file named “Important”.
■ To view the camera user’s guide
3. Open the folder named “Installer”, and then
open the file named “readme”.
1. On the CD-ROM, open the “Manual” folder.
4. Follow the instructions in the “readme” file to
2. Open the “Digital Camera” folder, and then
install Photo Loader.
open the folder for the language whose user’s
guide you want to view.
IMPORTANT!
• If you are upgrading to the new version of Photo
Loader from a previous version and you want to use
library management data and HTML files created
using the old version of Photo Loader, be sure to
read the “Important” file in the “Photo Loader” folder.
Follow the instructions in the file to use your existing
library management files. Failure to follow this
procedure correctly can result in loss or corruption of
your existing files.
3. Open the file named “camera_xx.pdf”.
• “xx” is the language code (Example: camera_e.pdf is
for English.)
190
USING THE CAMERA WITH A COMPUTER
■ To view the Photo Loader user’s guide
1. On the CD-ROM, open the “Manual” folder.
2. Open the “Photo Loader” folder and then
open the “English” folder.
3. Open “PhotoLoader_english”.
■ To register as a camera user
Internet registration only is supported. Visit the following
CASIO website to register:
http://world.casio.com/qv/register/
191
APPENDIX
APPENDIX
Sharpness
+2 / +1 / 0 / –1 / –2
Saturation
+2 / +1 / 0 / –1 / –2
Contrast
+2 / +1 / 0 / –1 / –2
Flash Intensity
+2 / +1 / 0 / –1 / –2
Flash Assist
Auto / Off
Grid
On / Off
■ REC Modes
Digital Zoom
On / Off
Review
On / Off
● REC Tab Menu
Icon Help
On / Off
L/R Key
REC Mode / EV shift / White Balance / ISO /
Menu Reference
The following shows lists of menus that appear in REC
modes and the PLAY mode, and their settings.
• The settings that are underlined in the following table are
initial defaults.
REC Mode
Snapshot /
(
Self-timer
Size
+
)/
BESTSHOT /
Movie /
Self-timer / Off
Voice
10 sec / 2 sec / X3 / Off
2560 × 1920 / 2560 × 1712 (3:2) /
2048 × 1536 / 1600 × 1200 / 1280 × 960 /
640 × 480
Quality
Fine / Normal / Economy
EV Shift
–2.0 / –1.7 / –1.3 / –1.0 / –0.7 / –0.3 / 0.0 /
+0.3 / +0.7 / +1.0 / +1.3 / +1.7 / +2.0
White Balance
Auto /
(Daylight) /
(Shade) /
1
(Cloudy) /
(Fluorescent 1) /
(Fluorescent 2) /
2
(Tungsten) / Manual
ISO
Auto / ISO 50 / ISO 100 / ISO 200 / ISO 400
AF Area
Spot / Multi
Auto PF
On / Off
192
APPENDIX
● Memory Tab Menu
● Set Up Tab Menu
REC Mode
Flash
On / Off
On / Off
Sounds
Focus
White Balance
On / Off
On / Off
Startup
On (Selectable image) / Off
File No.
Continue / Reset
ISO
AF Area
On / Off
On / Off
World Time
Home / World
Self-timer
Flash Intensity
On / Off
On / Off
Digital Zoom
MF Position
On / Off
On / Off
Zoom Position
On / Off
Startup / Half Shutter /Shutter / Operation /
Volume
Home Time setup (city, DST, etc.)
World Time setup (city, DST, etc.)
Date Style
YY/MM/DD / DD/MM/YY / MM/DD/YY
Adjust
Time setting
Language
/ English / Français / Deutsch /
Español / Italiano / Português /
/
/
Sleep
30 sec / 1 min / 2 min / Off
Auto Power Off
2 min / 5 min
REC / PLAY
Power On / Power On/Off / Disable
USB
Mass Storage (USB DIRECT- PRINT) /
PTP (PictBridge)
193
Format
Format / Cancel
Reset
Reset / Cancel
APPENDIX
■ PLAY Mode
● Set Up Tab Menu
● PLAY Tab Menu
Sounds
Slideshow
Start / Images / Time / Interval / Cancel
Favorites
Show / Save / Cancel
DPOF
Select images / All images / Cancel
Protect
On / All Files : On / Cancel
Rotation
Resize
Rotate / Cancel
1280 × 960 / 640 × 480 / Cancel
Trimming
–
Dubbing
–
Create Album
Create / Delete / Layout / Set Up / Cancel
Alarm
Alarm setups
Copy
Built-in
Card / Card
Startup / Half Shutter /Shutter / Operation /
Volume
Startup
On (Selectable image) / Off
File No.
Continue / Reset
World Time
Home / World
Home Time setup (city, DST, etc.)
World Time setup (city, DST, etc.)
Date Style
YY/MM/DD / DD/MM/YY / MM/DD/YY
Adjust
Time setting
Language
/ English / Français / Deutsch /
Español / Italiano / Português /
/
/
Built-in / Cancel
Sleep
30 sec / 1 min / 2 min / Off
Auto Power Off
2 min / 5 min
REC / PLAY
Power On / Power On/Off / Disable
USB
Mass Storage (USB DIRECT- PRINT) /
PTP (PictBridge)
194
Format
Format / Cancel
Reset
Reset / Cancel
APPENDIX
■ REC Modes
Indicator Lamp Reference
The camera has three indicator lamps: a green operation
lamp, a red operation lamp, and a self-timer lamp. These
lamps light and flash to indicate the current operational
status of the camera.
Operation Lamp
Green
Red
Self-timer
Lamp
Operational (Power on, recording
enabled)
Lit
Green operation lamp
Self-timer lamp
Pattern 3
Lit
Flash is charging.
Flash charging is complete.
Lit
Pattern 3
Auto Focus operation was successful.
Cannot Auto Focus.
Lit
Pattern 2
Monitor screen is off.
Storing image
Storing movie data / processing
Pattern 1
Red operation lamp
Meaning
Red
Pattern 1
* There are three lamp flash patterns. Pattern 1 flashes once per
second, Pattern 2 flashes twice per second, and Pattern 3 flashes
four times per second. The table below explains what each flash
pattern indicates.
Pattern 2
image data
Self-timer countdown
(10 to 3 seconds)
Self-timer countdown
Pattern 1
(3 to 0 seconds)
Cannot charge flash.
Pattern 2
Memory card problem / Memory
card is unformatted. / BESTSHOT
setup cannot be registered.
Memory card is locked. / Cannot
Lit
195
create folder. / Memory is full. /
Write error
APPENDIX
Operation Lamp
Green
Self-timer
Lamp
Red
Pattern 3
■ PLAY Mode
Meaning
Red
Operation Lamp
Pattern 3
Low battery alert
Formatting card
Pattern 3
Powering down
Green
Red
enabled)
One of the following operations is
IMPORTANT!
being performed: delete, DPOF,
image protect, copy, album creation,
Pattern 3
Pattern 2
Lit
Pattern 3
196
Meaning
Red
Operational (Power on, recording
Lit
• When you are using a memory card, never remove
the card from the camera while the green operation
lamp is flashing. Doing so will cause recorded
images to be lost.
Self-timer
Lamp
format, power down
Memory card problem / Memory
card is unformatted.
Memory card is locked. / Cannot
create folder. / Memory is full.
Low battery alert
APPENDIX
■ USB Cradle Indicator Lamps
The USB cradle has two indicator lamps: a [CHARGE]
lamp and a [USB] lamp. These lamps light and flash to
indicate the current operational status of the USB cradle
and camera.
[CHARGE] lamp
[USB] lamp
[CHARGE] lamp
Color
Red
Status
Lit
Green
Amber
Lit
Lit
Red
Flashing
[USB] lamp
Color
Meaning
Status
Charging
Charging complete
Charge standby
Green
Green
Lit
Charge error
USB connection
Flashing Accessing memory
197
APPENDIX
Troubleshooting Guide
Symptom
Possible Cause
Power does not turn on.
1) The battery is not oriented correctly.
2) The battery is dead.
1) Orient the battery correctly (page 29).
2) Charge the battery (page 31). If the battery
goes dead soon after being charged, it means
the battery has reached the end of its life and
needs to be replaced. Purchase a separately
available NP-40 rechargeable lithium ion
battery.
Camera suddenly powers
down.
1) Auto Power Off activated (page 41).
2) The battery is dead.
1) Turn power back on.
2) Charge the battery (page 31).
Image is not recorded
when the shutter button is
pressed.
1) The camera is in the PLAY mode.
1) Press [
] (REC) to enter the currently
selected recording mode.
2) Wait until the flash unit finishes charging.
3) Transfer files you want to keep to your
computer and then delete files from image
memory, or use a different memory card.
Auto Focus does not focus
properly
1) The lens is dirty.
2) The subject is not located in the center of the
focus frame when you compose the image.
3) The subject you are shooting is a type that is
not compatible with Auto Focus operation (page
53).
4) You are moving the camera.
Power Supply
Image Recording
Action
2) Flash unit is being charged.
3) Memory is full.
198
1) Clean the lens.
2) Make sure the subject is centered in the focus
frame when composing the image.
3) Use manual focus (page 74).
4) Mount the camera on a tripod.
APPENDIX
Image Recording
Symptom
Possible Cause
Action
The subject is out of focus
in the recorded image.
The image is not focused properly.
When composing the image, make sure the
subject on which you want to focus is located
inside the focus frame.
The flash does not fire.
1)
2)
3)
4)
1)
2)
3)
4)
Camera powers down
during self-timer
countdown.
The battery is dead.
Charge the battery (page 31).
Monitor screen image is
out of focus.
1) You are using the Manual Focus mode and
have not focused the image.
2) You are trying to use the Macro mode (
)
when shooting a scenery or portrait shot.
3) You are trying to use Auto Focus or the Infinity
mode (
) when shooting a close-up shot.
1) Focus the image (page 74).
1) Camera powers down before the save
operation is complete.
2) Removing the memory card before the save
operation is complete.
”, charge
1) When the battery indicator shows “
the battery as soon as possible (page 31).
2) Do not remove the memory card before the
save operation is complete.
Recorded images are not
saved in memory.
“
” (flash off) is selected as the flash mode.
The battery is dead.
The camera is in the Movie mode.
A scene that selects “
” (flash off) as the flash
mode is selected in the BESTSHOT mode.
199
Select a different flash mode (page 59).
Charge the battery (page 31).
Select a different recording mode.
Select a different flash mode (page 59) or
BESTSHOT scene (page 81).
2) Use Auto Focus for scenery and portrait shots.
3) Use the Macro mode (
) for close-ups.
APPENDIX
Possible Cause
Action
Sunlight or light from another source is shining
directly into the lens during recording.
Position the camera so sunlight does not shine
directly into the lens.
Images are not displayed.
A memory card with non-DCF images recorded
with another camera is loaded in the camera.
This camera cannot display non-DCF images
recorded onto a memory card using another digital
camera.
All buttons and switches
are disabled.
Circuit problem caused by electrostatic charge,
impact, etc. while the camera was connected to
another device.
Remove the battery from the camera, reinsert it,
and then try again.
Monitor screen is off.
1) USB communication is in progress.
1) After the computer stops accessing camera file
memory, press the [USB] button on the USB
cradle. Check to make sure that the [USB] lamp
on the USB cradle is off, and then remove the
camera from the USB cradle.
2) Press [DISP] to turn on the monitor screen.
Other
Playback
Symptom
Color of the playback
image is different from the
image on the monitor
screen during recording.
2) The monitor screen is turned off (in a REC
mode).
Cannot transfer files over a
USB connection.
1) Camera is not set securely on the USB cradle.
2) USB cable is not connected securely.
3) USB driver is not installed.
4) Camera is turned off.
200
1) Check the connection between the camera and
USB cradle.
2) Check all connections.
3) Install the USB driver on your computer (page
160).
4) Press the [USB] button on the USB cradle.
APPENDIX
If you have problems installing the USB driver...
You may not be able to install the USB driver properly if you use the USB cable to connect the camera to a computer running
Windows 98 before installing the USB driver from the bundled CD-ROM (CASIO Digital Camera Software), or if you have
another type of driver installed. This will make it impossible for the computer to recognize the digital camera when it is
connected. If this happens, you will need to re-install the camera’s USB driver. For information about how to re-install the USB
driver, see the USB driver’s “Read me” file on “CASIO Digital Camera Software” CD-ROM that comes bundled with the
camera.
201
APPENDIX
Display Messages
Alarm setting
complete.
This message appears after you change the alarm
setting.
Check connections!
You are trying to print on the printer over an
incompatible USB connection.
Battery is low.
The battery is dead.
The battery is dead, so the recorded image could
not be saved.
Cannot correct
image!
Keystone correction cannot be performed for some
reason. The image will be stored as-is, without
correction (page 90).
File could not be
saved because
battery is low.
Folder cannot be
created.
This message appears when you try to record an
image while there are 9,999 files stored in the
999th folder. If you want to record more files,
delete files you no longer need (page 125).
LENS ERROR
If the lens comes into contact with some obstacle
while it is extending, this message appears, the lens
retracts, and the camera turns off. Take action to
remove the obstacle, and try turning on power again.
Load paper!
The camera is in the Printer mode, and the printer
is out of paper.
Memory Full
Memory is full. If you want to record more files,
delete files you no longer need (page 125).
No Favorites file!
There is no FAVORITE file.
Printing Error
One of the following problems occurred during
printing.
• Printer power off
• Printer internal error
Can not find the file. The camera cannot find a image specified by the
slideshow “Images” setting. Specify another image
(page 117).
Cannot register any
more files.
Card ERROR
• You are attempting to save a BESTSHOT user
setup when the “SCENE” folder already contains
999 setups (page 83).
• You are attempting to copy a FAVORITE file
when the “FAVORITE” folder already contains
9999 files (page 129).
Some problem occurred with the memory card.
Turn off the camera, and remove and then reinsert
the memory card. If the same message appears,
format the memory card (page 148).
IMPORTANT!
Formatting the memory card deletes all files on
the memory card. Before formatting, try
transferring recoverable files to a computer or
some other storage device.
202
APPENDIX
Record Error
Image compression could not be performed during
image data storage for some reason. Record the
image again.
This function cannot You attempted to copy files from built-in memory
be used.
to a memory card loaded in the camera while there
is no memory card in the camera (page 150).
Replenish ink!
The camera is in the Printer mode, and the printer
is running low on ink or is out of ink.
This function is not
supported for this
file.
SYSTEM ERROR
Your camera system is corrupted. Contact your
retailer or a CASIO service center.
The card is locked.
The LOCK switch of the SD memory card is locked.
You cannot store images to or delete images from
a memory card that is locked.
There are no files.
There are no files in built-in memory or on the
memory card.
There are no printing There are no DPOF settings specifying images and
images.
the number of copies of each for printing.
Set up DPOF.
Configure the required DPOF settings (page 153).
There is no image to You are trying to save an invalid image as a
register.
BESTSHOT user setup, or as an original startup
image.
This card is not
formatted.
The memory card loaded in the camera is not
formatted. Format the memory card (page 148).
This file cannot be
played.
The image file or audio file is corrupted, or is a type
that cannot be displayed by this camera.
203
The function you are trying to perform is not
supported for the file on which you are trying to
perform it.
APPENDIX
Approximate Memory Capacity and File sizes:
Specifications
• Snapshots
Product ............................... Digital Camera
File Size
(pixels)
2560 × 1920
Model .................................. EX-Z50
■ Camera Functions
2560 × 1712
(3:2)
Image Files Format
Snapshots ....................... JPEG (Exif Ver.2.2); DCF (Design rule
for Camera File system) 1.0 standard;
DPOF compliant
Movies ............................. AVI (Motion JPEG)
Audio ............................... WAV
2048 × 1536
1600 × 1200
(UXGA)
Recording Media ............... 9.3MB built-in flash memory
SD Memory Card
MultimediaCard
1280 × 960
(SXGA)
Image Size
Snapshots ...................... 2560 × 1920 pixels
2560 × 1712 (3:2) pixels
2048 × 1536 pixels
1600 × 1200 pixels
1280 × 960 pixels
640 × 480 pixels
Movies ............................... 320 × 240 pixels
640 × 480
(VGA)
Quality
Approximate
Built-in flash
Image File Size memory 9.3MB
Fine
2.2MB
Normal
Economy
Fine
Normal
Economy
Fine
Normal
Economy
Fine
Normal
Economy
Fine
Normal
Economy
Fine
Normal
Economy
1.8MB
1.3MB
2.0MB
1.6MB
1.1MB
1.6MB
1.2MB
630KB
1.05MB
710KB
370KB
680KB
460KB
250KB
190KB
140KB
90KB
4 shots
4
6
4
5
7
5
6
13
8
12
23
12
19
33
44
58
94
shots
shots
shots
shots
shots
shots
shots
shots
shots
shots
shots
shots
shots
shots
shots
shots
shots
SD Memory
Card 64MB*
26 shots
32 shots
44 shots
29 shots
36 shots
51 shots
34 shots
45 shots
88 shots
53 shots
79 shots
154 shots
82 shots
126 shots
221 shots
294 shots
386 shots
618 shots
* Based on Matsushita Electric Industrial Co., Ltd. products.
Capacity depends on card manufacturer.
* To determine the number of images that can be stored on a
memory card of a different capacity, multiply the capacities in the
table by the appropriate value.
204
APPENDIX
• Movies (320 × 240 pixels)
Data Size
Exposure Control
Light Metering ................. Multi-pattern by CCD
Exposure ......................... Program AE
Exposure Compensation ..... –2EV to +2EV (1/3EV units)
300KB/second max.
Delete .................................. Single-file, all files (with protection)
Shutter ................................ CCD electronic shutter; mechanical
shutter, 1/8 to 1/2000 second
• Shutter speed is different for the
following BESTSHOT scenes.
Night Scene: 4 to 1/2000 second
Fireworks: 2 seconds (fixed)
Effective Pixels .................. 5.0 million
Imaging Element ................ 1/2.5-inch square pixel color CCD
(Total pixels: 5.25 million)
Lens/Focal Distance
Lenses ............................. Six lenses in five groups, including an
aspherical lens
F2.6 (W) to 4.8 (T); f=5.8 (W) to
17.4mm (T) (equivalent to
approximately 35 (W) to 105 (T) for
35mm film)
Aperture .............................. F2.6/4.3, auto switching
White Balance .................... Automatic, fixed (6 modes), manual
switching
Sensitivity ........................... Auto, ISO 50, ISO 100, ISO 200, ISO
400
Zoom ................................... 3X optical zoom; 4X digital zoom
(12X in combination with optical zoom)
Self-timer ............................ 10 seconds, 2 seconds, Triple Selftimer
Focusing ............................. Contast-type Auto Focus with AF
mode (Spot or Multi AF Area), Macro
mode, Pan Focus, Infinity mode, focus
lock, manual focus
Built-in Flash
Flash Modes .................... AUTO, ON, OFF, Red eye reduction
Flash Range .................... Wide Angle Optical Zoom: 0.4 to 2.6
meters (1.3´ to 8.5´)
Telephoto Optical Zoom: 0.4 to 2.0
meters (1.3´ to 6.6´)
(ISO Sensitivity: “Auto”)
Approximate Focus Range (from lens surface)
Normal ............................. 40cm to ∞ (1.3´ to ∞)
Macro .............................. 6cm to 50cm (2.4˝ to 19.7˝)
Recording Functions ........ Audio snapshot; Macro; self-timer;
BESTSHOT; Movie with audio; voice
recording
• Audio recording is monaural.
205
APPENDIX
■ Power Requirements
Audio Recording Time
Audio Snapshot ............... Approximately 30 seconds maximum
per image
Voice Recording .............. Approximately 39 minutes with built-in
memory
After Recording ............... Approximately 30 seconds maximum
per image
Power Requirements ........ Rechargeable lithium ion battery
(NP-40) × 1
Approximate Battery Life:
The values below indicate the amount of time under the conditions defined
below, until power automatically turns off due to battery failure. They do not
guarantee that you will be able to achieve this level of operation. Low
temperatures shorten battery life.
Monitor Screen .................. 2.0-inch TFT color LCD
84,960 pixels (354 × 240)
Viewfinder .......................... Monitor screen and optical viewfinder
Timekeeping Functions .... Built-in digital quartz clock
Date and Time ................ Recorded with image data
Auto Calendar ................. To 2049
World Time ...................... City; Date; Time; Summer time;
162 cities in 32 time zones
Operation
Approximate Battery Life
Number of Shots (CIPA Standard)*1
(Operating Time)
390 shots (195 minutes)
Number of Shots, Continuous
Recording*2 (Operating Time)
970 shots (190 minutes)
Continuous Snapshot Playback*
Continuous Voice Recording*4
Input/Output Terminals .... Cradle connector
Microphone ........................ Monaural
3
380 minutes
350 minutes
Supported Battery: NP-40 (Rated Capacitance: 1230mAh)
Storage Medium: SD Memory Card
Speaker ............................... Monaural
*1 Number of Shots (CIPA Standard)
• Temperature: 23°C (73°F)
• Monitor Screen: On
• Zoom operation between full wide to full telephoto every 30 seconds,
during which two images are recorded, one image with flash; power
turned off and back on every time 10 images are recorded.
206
APPENDIX
■ Rechargeable Lithium Ion Battery (NP-40)
*2 Continuous Recording Conditions
• Temperature: 23°C (73°F)
• Monitor screen: On
• Flash: Off
• Image recorded every 12 seconds, alternating full wide-angle and full
telephoto zoom
Rated Voltage .................... 3.7 V
Rated Capacitance ............ 1230 mAh
Operating Temperature
Range .................................. 0°C to 40°C (32°F to 104°F)
*3 Continuous Snapshot Playback Conditions
• Temperature: 23°C (73°F)
• Scroll one image about every 10 seconds
Dimensions ........................ 38.5(W) × 38.0(H) × 9.3(D) mm
(1.53˝(W) × 1.50˝(H) × 0.37˝(D))
*4 Voice recording times are based on continuous recording.
Weight ................................. Approximately 34 g (1.2 oz)
Power Consumption ......... 3.7V DC Approximately 3.0W
Dimensions ........................ 87(W) × 57(H) × 22.4(D) mm
(3.4˝(W) × 2.2˝(H) × 0.88˝(D))
(excluding projections; 19.7mm (0.78˝)
at thinnest part)
■ USB Cradle (CA-24)
Input/Output Terminals .... Camera connector; USB port; AC
adaptor terminal (DC IN 5.3V)
Weight ................................. Approximately 121 g (4.3 oz)
(excluding battery and accessories)
Power Consumption ......... 5.3V DC Approximately 3.2W
Dimensions ........................ 103(W) × 32(H) × 70(D) mm
(4.1˝(W) × 1.3˝(H) × 2.8˝(D))
(excluding projections)
Bundled Accessories ........ Rechargeable lithium ion battery (NP40); USB cradle (CA-24); Special AC
adaptor; AC power cord; USB cable;
Strap; CD-ROM; Basic Reference
Weight ................................. Approximately 71 g (2.5 oz)
207
APPENDIX
■ Special AC Adaptor (Inlet Type) (AD-C51G)
Power Supply
• Use only the special NP-40 rechargeable lithium ion battery to power this
camera. Use of any other type of battery is not supported.
• This camera does not have a separate battery for the clock. The date and
time settings of the camera are cleared whenever power is totally cut off
(from both the battery and USB cradle). Be sure to reconfigure these
settings after power is interrupted (page 44).
Power Requirement .......... 100 to 240V AC, 50/60Hz, 83 mA
Output ................................. 5.3V DC, 650 mA
Dimensions ........................ 78(W) × 20(H) × 39(D) mm
(3.1˝(W) × 0.8˝(H) × 1.5˝(D))
(excluding projections and cable)
LCD Panel
• The LCD panel is a product of the latest LCD manufacturing technology that
provides a pixel yield of 99.99%. This means that less than 0.01% of the
total pixels are defective (they do not turn on or always remain turned on).
Weight ................................. Approximately 90 g (3.2 oz)
Lens
• You may sometimes notice some distortion in certain types of images, such
as a slight bend in lines that should be straight. This is due to the
characteristics of lens, and does not indicate malfunction of the camera.
■ Special AC Adaptor (Plug-in Type) (AD-C51J)
Power Requirement .......... 100 to 240V AC, 50/60Hz, 83mA
Output ................................. 5.3V DC, 650mA
Dimensions ........................ 48(W) × 16(H) × 69(D) mm
(1.9˝(W) × 0.6˝(H) × 2.7˝(D))
(excluding projections and cable)
Weight ................................. Approximately 95 g (3.6 oz)
208