Samsung HT-DS660 Instruction manual

1p~40p(DS660)-SECA GB
11/10/04 1:26 PM
Page 3
DIGITAL HOME
THEATER SYSTEM
HT-DS660
Instruction Manual
COMPACT
DIGITAL AUDIO
1p~40p(DS660)-SECA GB
11/10/04 1:26 PM
Page 4
Safety Warnings
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE REAR COVER.
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Note to CATV system installer :
This reminder is provided to call the CATV system
installer’s attention to Section 820~40 of the NEC
which provides guidelines for proper grounding and,
in particular, specifies that the cable ground shall be
connected to the grounding system of the building,
as close to the point of cable entry as practical
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a CLASS 1
LASER product.
Use of controls, adjustments or performance of
procedures other than those specified herein may result
in hazardous radiation exposure.
CAUTION-INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCKS DEFEATED, AVOID
EXPOSURE TO BEAM.
This symbol indicates that dangerous voltage which can cause electric shock is present inside
this unit.
This symbol alerts you to important operating and maintenance instructions accompanying
the unit.
WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
1
1p~40p(DS660)-SECA GB
11/10/04 1:26 PM
Page 5
Precautions
PREPARATION
Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your
player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure the ventilation slots
are not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which may become
hot. Before moving the player, ensure the disc tray is empty. This player is designed for continuous use. Switching off the DVD player to
the stand-by mode does not disconnect the electrical supply. In order to disconnect the player completely from the power supply,
remove the main plug from the wall outlet, especially when left unused for a long period of time.
During thunderstorms, disconnect AC main plug from the
wall outlet.
Voltage peaks due to lightning could damage the unit.
Do not expose the unit to direct sunlight or other heat
sources.
This could lead to overheating and malfunction of the unit.
Protect the player from moisture(i.e. vases) , and excess
heat(e.g.fireplace) or equipment creating strong magnetic or electric
fields (i.e.speakers...). Disconnect the power cable from the AC supply if
the player malfunctions. Your player is not intended for industrial use.
Use of this product is for personal use only.
Condensation may occur if your player or disc have been stored in cold
temperatures.
If transporting the player during the winter, wait approximately 2 hours
until the unit has reached room temperature before using.
The battery used with this product contain chemicals that
are harmful to the environment.
Do not dispose of batteries in the general household trash.
2
1p~40p(DS660)-SECA GB
11/10/04 1:26 PM
Page 6
Features
Multi-Disc Playback & AM/FM Tuner
The HT-DS660 combines the convenience of multi-disc playback capability, including DVD-AUDIO,
DVD-VIDEO, VCD, CD, MP3-CD, CD-R/RW, and DVD-R/RW, with a sophisticated AM/FM tuner,
all in a single player.
DVD-Audio compatible
Experience the super high-quality audio performance of DVD-Audio.
The on-board 24-bit/192kHz DAC enables this player to deliver exceptional sound quality in terms
of dynamic range, low-level resolution and high-frequency detail.
Super Digital Sound Master
Equipped with a new digital audio technology (Auto Sound Calibration, Magic
Sound Field, and Magic Headphone) developed in cooperation with DiMagic Co.,
Ltd. in Japan, you'll enjoy a more lively and sensitive sound.
RRSS (Rear Reflecting Surround System)
The sound from the rear speaker is reflected against the side and rear walls before reaching the
listener to produce realistic sound as if you have installed an actual 5.1-channel speaker system.
Sound Logo
When power is turned on, a sound logo is output from the speakers to notify the user that the unit
is optimized for disc playback.
TV Screen Saver Function
The HT-DS660 automatically brightens and darkens the brightness of the TV screen after 3
minutes in the stop mode.
The HT-DS660 automatically switches itself into the power saving mode after 20 minutes in the
screen saver mode.
Power Saving Function
The HT-DS660 automatically shuts itself off after 20 minutes in the stop mode.
Customized TV Screen Display
The HT-DS660 allows you to select your favorite image during JPEG, DVD playback and set it as
your background wallpaper.
P.SCAN(Progressive Scan) Function
Unlike regular Interlace Scan, in which two fields of picture information alternate to create the
entire picture (odd scan lines, then even scan lines), Progressive Scan uses one field of
information (all lines displayed in one pass) to create a clear and detailed picture without visible
scan lines.
Samsung AV Device Operation using Anynet
3
You can conveniently operate Samsung DVD and other Samsung AV devices with one remote
controller of Samsung TV, using Anynet.
1p~40p(DS660)-SECA GB
11/10/04 1:26 PM
Page 7
Contents
PREPARATION
PREPARATION
Safety Warnings..................................................................................................................................................................1
Precautions .........................................................................................................................................................................2
Features..............................................................................................................................................................................3
Notes on Discs....................................................................................................................................................................5
Description ..........................................................................................................................................................................7
CONNECTIONS
Connecting the Speakers....................................................................................................................................................11
Connecting the Video Out to TV .........................................................................................................................................14
P.SCAN(Progressive Scan) Function .................................................................................................................................15
How to Connect to Anynet ..................................................................................................................................................16
Connecting External Components ......................................................................................................................................17
Connecting the Antennas....................................................................................................................................................19
Before Using Your DVD Player...........................................................................................................................................21
OPERATION
Disc Playback .....................................................................................................................................................................23
Selecting a Disc in the Disc changer ..................................................................................................................................24
MP3-CD Playback...............................................................................................................................................................25
JPEG Disc Playback ...........................................................................................................................................................26
Displaying Disc Information ................................................................................................................................................27
Checking the Remaining Time............................................................................................................................................28
Fast/Slow Playback.............................................................................................................................................................29
Skipping Scenes/Songs ......................................................................................................................................................30
Repeat Playback.................................................................................................................................................................31
A-B Repeat Playback..........................................................................................................................................................33
Angle Function ....................................................................................................................................................................34
Zoom Function ....................................................................................................................................................................35
Bonus Group / Navigating Pages........................................................................................................................................36
Selecting Audio/Subtitle Language .....................................................................................................................................37
Moving Directly to a Scene/Song........................................................................................................................................38
Using Disc Menu.................................................................................................................................................................39
Using the Title Menu ...........................................................................................................................................................40
SETUP
Setting the Language..........................................................................................................................................................41
Language Code List............................................................................................................................................................41
Setting TV Screen type .......................................................................................................................................................43
Setting Parental Controls (Rating Level).............................................................................................................................45
Setting the Password ..........................................................................................................................................................47
Setting the Wallpaper..........................................................................................................................................................49
DVD Playback Mode...........................................................................................................................................................51
AV SYNC Setup .................................................................................................................................................................52
Setting the Speaker Mode ..................................................................................................................................................53
Setting the Test Tone..........................................................................................................................................................54
Setting the Delay Time........................................................................................................................................................55
Setting the Audio Quality ....................................................................................................................................................57
Setting the DRC (Dynamic Range Compression)...............................................................................................................59
Dolby Pro Logic II Mode......................................................................................................................................................61
Dolby Pro Logic II Effect .....................................................................................................................................................62
Setting the RRSS(Rear Reflecting Surround System)........................................................................................................63
Rear Reflecting Surround System ......................................................................................................................................65
Live Surround Mode ...........................................................................................................................................................66
SURROUND PLUS / Virtual Headphone ............................................................................................................................67
SUPER 5.1..........................................................................................................................................................................68
RADIO OPERATION
Listening to Radio ...............................................................................................................................................................69
Presetting Stations..............................................................................................................................................................70
MISCELLANEOUS
Convenient Functions .........................................................................................................................................................71
Operating a TV with the Remote Control ............................................................................................................................73
Before Calling for Service ...................................................................................................................................................75
Cautions on Handling and Storing Discs ............................................................................................................................77
Specifications......................................................................................................................................................................78
Notes on Terminology.........................................................................................................................................................79
Warranty .............................................................................................................................................................................80
4
1p~40p(DS660)-SECA GB
11/10/04 1:26 PM
Page 8
Notes on Discs
DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby Digital
VIDEO
1
~ 6
surround sound and MPEG-2 video compression technology. Now you can enjoy these
realistic effects in the home, as if you were in a movie theater or concert hall.
DVD players and the discs are coded by region. These regional codes must match in order
for the disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is given on the rear panel of the player.
(Your DVD player will only play DVDs that are labeled with identical region codes.)
Playable Discs
Disc Type
Mark (Logo)
Recorded Signals
Disc Size
5"
DVD-AUDIO
DVD-VIDEO
Audio + Video
3 1/2"
COMPACT
Audio + Video
VIDEO-CD
DIGITAL VIDEO
COMPACT
Audio
AUDIO-CD
DIGITAL AUDIO
Max. Playing Time
Approx. 240 min. (single-sided)
Approx. 480 min. (double-sided)
Approx. 80 min. (single-sided)
Approx. 160 min. (double-sided)
5"
74 min.
3 1/2"
20 min.
5"
74 min.
3 1/2"
20 min.
Do not use the following types of disc!
• LD, CD-G, CD-I, CD-ROM and DVD-ROM cannot be played on this player.
If such discs are played, a "WRONG DISC FORMAT" message appears on the TV screen.
• DVD discs purchased abroad may not play on this player.
If such discs are played, a "WRONG REGION CODE" message appears on the TV screen.
Copy Protection
• Many DVD discs are encoded with copy protection. Because of this, you should only connect your
•
5
DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture
from copy-protected DVD discs.
This product incorporates copyright protection technology that is protected by methods claims of certain
U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
1p~40p(DS660)-SECA GB
11/10/04 1:26 PM
Page 9
PREPARATION
Disc Recording Format
CD-R Discs
• Depending on the disc recording device (CD-Recorder or PC ) and the condition of the disc, some CD-R discs
may not be playable.
• Use a 650MB/74 minute CD-R. Avoid CD-R media, as they may not be playable.
• If possible, do not use CD-RW (Rewritable) media, as they may not be playable.
• Only CD-Rs that are properly "closed" can be fully played. If the session is closed but the disc is left open,
you may not be able to fully play the disc.
CD-R MP3 Discs
• Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played.
• MP3 file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• Use discs recorded with a compression/decompression data rate greater than 128Kbps.
• Only files with the ".mp3" and ".MP3" extensions can be played.
• Only a consecutively written Multi session disc can be played. If there is a blank segment in the Multi session disc, the
disc can be played only up to the blank segment.
• If the disc is not closed, it will take longer to begin playback and not all of the recorded files may be played.
• For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded in both low bit rate and high bit rate (e.g., 32Kbps
~ 320Kbps), the sound may skip during playback.
• If more than 500 tracks are recorded on a single CD, a maximum of 500 tracks can be played.
• If more than 300 folders are recorded on a single CD, a maximum of 300 folders can be played.
CD-R JPEG Discs
• Only files with the ".jpeg" and ".JPEG" extensions can be played.
• If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
• JPEG file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• Only a consecutively written multi session disc can be played. If there is a blank segment in the multi session disc, the
disc can be played only up to the blank segment.
• A maximum of 9,999 images can be stored on a single CD.
• When playing a Kodak/Fuji Picture CD, only the JPEG files in the picture folder can be played.
• Picture discs other than Kodak/Fuji Picture CDs may take longer to start playing or may not play at all.
6
1p~40p(DS660)-SECA GB
11/10/04 1:26 PM
Page 10
Description
—Front Panel—
Headphone Jack
Disc Tray
Standby indicator
Volume control
Direct Play button
Live Surround Mode button
Open/Close button
RRSS
1
2
DIRECT PLAY
3
Tuning Down & Skip (
) button
) buttons
Stop (
PRO LOGIC II indicator
LINEAR PCM indicator
RRSS INPUT Jack
) buttons
) button
GROUP indicator
CHAPTER indicator
DTS Disc
indicator
Remote Control Sensor
) button Tuning Up & Skip (
Play/Pause (
5
Disc Change
button
SURROUND PLUS button /
Virtual Headphone button
Function button
Power (
4
TITLE
indicator
TRACK indicator
PROGRAM indicator
TUNER indicator
REPEAT indicator
DISC A↔ B indicator
DISC(1~5)
indicator
System Status Display
P.SCAN indicator
DVD AUDIO indicator
SPEAKER indicator
DSP indicator
DOLBY DIGITAL indicator
7
RADIO FREQUENCY
indicator
1p~40p(DS660)-SECA GB
11/10/04 1:26 PM
Page 11
5.1 Channel Speaker
Output Terminals
External Digital in Optical Input Connector
Use this to connect external equipment
capable of digital output.
External Video Component
Input Connectors
External Audio Component
Input Connector
AM Antenna
Connector
Video Output Connector
ANYNET
OUTPUT/INPUT
Connector
FM Antenna
Connector
Connect the TV's video input jacks
(VIDEO IN) to the VIDEO OUT connector.
S-Video Output Connector
COMPONENT VIDEO
OUTPUT/INPUTConnectors
If the TV is equipped with an S-Video input
connector (S-VIDEO IN), connect it to the
player's S-Video output jack.
Accessories
Remote Control
AM Antenna
User's Manual
Audio Cable
Video Cable
FM Antenna
Anynet Cable
Auto Sound Calibration Microphone
8
PREPARATION
—Rear Panel—
1p~40p(DS660)-SECA GB
11/10/04 1:26 PM
Page 12
Description
—Remote Control—
TV, DVD POWER button
TV/VIDEO, DIMMER button
OPEN/CLOSE button
TV DVD RECEIVER
OPEN/CLOSE
TV/VIDEO
DIMMER
MODE
DISC SKIP
TUNER
BAND
AUX
PL II MODE
SLOW
MO/ST
LSM –
LSM +
PL II MODE button
Live Surround Mode –, + button
TV indicator
DVD RECEIVER indicator
MODE button
DISC SKIP button
PL II EFFECT
RRSS
AUX button
TUNER BAND button
PL II EFFECT button
SLOW, MO/ST button
RRSS button
DVD
Play/Pause button
VOLUME
SURR. PLUS button /
Virtual Headphone button
VOLUME button
SURR.
PLUS
SUPER 5.1
TUNING/CH button
U
MEN
INFO button
E
UT
M
RE
TU
RN
INFO
ENTER
SOUND EDIT
TUNER
MEMORY
P.SCAN
EZ VIEW button
SLEEP
LOGO
EZ VIEW
MUTE button
Direction/Enter button
TEST TONE
Number(0~9) buttons
SLEEP button
LOGO COPY button
Tuning Preset/CD Skip button
SUPER 5.1 button
V-H/P
MENU button
RETURN button
CANCEL
ZOOM
REPEAT
REMAIN
TEST TONE button
SOUND EDIT button
TUNER MEMORY, P.SCAN button
ZOOM button
CANCEL button
REMAIN button
REPEAT button
9
Stop button
TUNING/CH
1p~40p(DS660)-SECA GB
11/10/04 1:26 PM
Page 13
PREPARATION
Insert Remote Batteries
1
Remove the battery
cover on the back of
the remote by
pressing down and
sliding the cover in
the direction of the
arrow.
Caution
2
Insert two 1.5V AAA
batteries, paying
attention to the correct
polarities (+ and –).
3
Replace the battery
cover.
Follow these precautions to avoid leaking or cracking batteries:
• Place batteries in the remote control so they match the polarity:(+) to (+)and (–)to (–).
• Use the correct type of batteries.Batteries that look similar may differ in voltage.
• Always replace both batteries at the same time.
• Do not expose batteries to heat or flame.
Range of Operation of the Remote Control
The remote control can be used up to approximately 23
feet/7 meters in a straight line. It can also be operated at
a horizontal angle of up to 30° from the remote control
sensor.
To open the remote control cover, push the
top of the cover, then slide downward.
10
1p~40p(DS660)-SECA GB
11/10/04 1:26 PM
Page 14
Connecting the Speakers
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Position of the DVD Player
• Place it on a stand or cabinet shelf, or under
Selecting the Listening Position
The listening position should be located about 2.5 to 3
times the distance of the TV's screen size away from the
TV. Example: For 32" TVs 2~2.4m (6~8 feet)
For 55" TVs 3.5~4m (11~13 feet)
the TV stand.
Front/Rear Speakers L R / LS
• Place these speakers in front of your listening
•
•
position, facing inwards (about 45°) toward you.
Place the speakers so that their tweeters will be at
the same height as your ear.
Align the front face of the front speakers with the
front face of the center speaker or place them
slightly in front of the center speakers.
RS
Center Speaker C
• It is best to install it at the same height as the front
speakers.
• You can also install it directly over or under the TV.
Subwoofer SW
• The position of the subwoofer is not so critical.
Place it anywhere you like.
• Usually, it is placed by a corner near the front speakers.
11
1p~40p(DS660)-SECA GB
11/10/04 1:26 PM
Page 15
•Connect the front/rear, center, and subwoofer speakers to the speaker terminals on the back of the main unit.
Front/Rear Speaker (L)
Front/Rear Speaker (R)
CONNECTIONS
Center Speaker
Green
White
Purple
Blue
Red
Gray
Subwoofer
Back of the Main Unit
12
1p~40p(DS660)-SECA GB
11/10/04 1:26 PM
Page 16
Connecting the Speakers
Back of the Speaker
1 Press down the terminal 2
tab on the back of the
speaker.
Insert the black wire into the
back terminal (–) and the gray
wire into the gray (+) terminal,
and then release the tab.
Black
Gray
Caution
• Do not let children play with the speakers.
They could get hurt if a speaker falls.
• When connecting the speaker wires to the speakers,
make sure that the polarity (+/) is correct.
• Never touch the speaker terminal while the power is on.
Doing so may result in a risk of electric shock.
13
Back of the Main Unit
3 Connect the wires to the output plugs
of the same color on the back of the
main unit, making sure that the polarity
(+/–) is correct.
Example: Connect the center speaker's green
wire to the center speaker output plug
(green) on the back of the main unit.
Note
• If you place a speaker near your TV set,
screen color may be distorted because of
the magnetic field generated by the
speaker. In this case, place the speaker
away from your TV set.
1p~40p(DS660)-SECA GB
11/10/04 1:26 PM
Page 17
Connecting the Video Out to TV
CONNECTIONS
*
Depending on your TV, Component Video input jacks may be marked as DVD Video input.
Composite Video (Good Quality)
Connect the supplied video cable from the VIDEO OUT jack on the back panel of the
system to the VIDEO IN jack on your television.
S-Video (Better Quality)
If you television is equipped with an S-Video input, connect an S-Video cable (not supplied)
from the S-VIDEO OUT jack on the back panel of the system to the S-VIDEO IN jack on
your television.
Component Video (Best Quality)
If your television is equipped with Component Video inputs, connect a component video
cable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the
corresponding jacks on your television.
Note
• When the Progressive scan mode is selected, the VIDEO and S-VIDEO outputs do not feed
any signal. See page 15 to select Progressive Scan.
14
1p~40p(DS660)-SECA GB
11/10/04 1:26 PM
Page 18
P.SCAN(Progressive Scan) Function
Unlike regular Interlace Scan, in which two fields of picture information alternate to create the
entire picture (odd scan lines, then even scan lines), Progressive Scan uses one field of
information (all lines displayed in one pass) to create a clear and detailed picture without visible
scan lines.
1
Press STOP button.
• When disc is played back, press the STOP button twice so that “STOP”, appears on the display.
2
Press and hold P.SCAN button on the remote control for over 5 seconds.
• Pressing and holding the button for over 5 seconds will select "Progressive Scan" and "Interlace Scan"
repetitively.
• When you select P.SCAN, "P.SCAN" will appear on the display
What is Progressive (or Non-Interlaced) Scanning?
Interlaced Scan (1 FRAME = 2 FIELDS)
In interlaced-scan video, a frame consists of two
interlaced fields (odd and even), where each field
contains every other horizontal line in the frame.
The odd field of alternating lines is displayed first, and
then the even field is displayed to fill in the alternating
gaps left by the odd field to form a single frame.
One frame, displayed every 1/30th of a second, contains
two interfaced fields, thus a total of 60 fields are
displayed every 1/60th of a second.
The interlaced scanning method is intended for capturing
a still object.
Note
Progressive Scan (FULL FRAME)
The progressive scanning method scans one full frame of
video consecutively down the screen, line by line.
An entire image is drawn at one time, as opposed to the
interlaced scanning process by which a video image is
drawn in a series of passes.
The progressive scanning method is desirable for dealing
with moving objects.
• This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that support
•
Progressive Video. (It does not work on TVs with conventional component inputs, i.e., non-progressive
scan TVs.)
Depending on the brand and model of your TV, this function may not work.
Selecting the Video Format
Press and hold NTSC/PAL button on the remote controller for over 5 seconds while the power is turned off.
• "NTSC" or "PAL" will appear in the display.
At this time, press the NTSC/PAL button shortly to select between "NTSC" and "PAL".
• Each country has a different video format standard.
• For normal playback, the video format of the disc must be the same as the video format of your TV.
15
1p~40p(DS660)-SECA GB
11/10/04 1:26 PM
Page 19
How to Connect to Anynet
Using the Anynet function, the DVD Home Theater System can be conveniently controlled from
your Samsung TV. By connecting the Anynet output terminal on the DVD Home Theater
System to the input terminal of any Samsung Anynet-enabled device, both can be controlled
from your TV. For detailed operation instructions and connection diagram, refer to the user's
manual of your Anynet-enabled TV.
What is Anynet?
VIDEO IN
Other AV devices
Samsung DVD player
ANYNET
TERMINAL
Samsung VCR
Samsung Set-Top Box
Use this to connect Anynet-enabled
AV devices when necessary.
1
Connect the Anynet input terminal on the back of this unit to your Samsung TV's Anynet
output terminal.
2
Connect the Anynet Out Terminal on the back of this unit to the Anynet input of Samsung
external AV devices.
3
Refer to the user's manual of your Anynet-enabled TV and activate the Anynet function.
* This function is available only with Anynet-enabled TVs.
Caution
• If the Anynet input and output terminals are reversed, communication with the TV will fail and
you will not be able to use the Anynet function.
16
CONNECTIONS
• The Anynet function allows you to use your TV's remote control and menu to control all AV devices.
• However, this function is available only with Samsung Anynet-enabled models.
1p~40p(DS660)-SECA GB
11/10/04 1:26 PM
Page 20
Connecting External Components
Connecting an External Digital Component
Example: Digital signal components such as a Settop Box or CD Recorder.
Optical Cable
(not included)
1
Connect Video Out on the DVD player to Video In on the TV.
2
Connect the Digital Input (OPTICAL) to the Digital Output on the external digital component.
3
Press AUX on the remote control to select ‘DIGITAL IN’.
• Each time the button is pressed, the selection changes as follows: DIGITAL IN ➝ AUX 1 ➝ AUX 2.
• You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD ➝ DIGITAL IN ➝ AUX1 ➝ AUX2 ➝ FM ➝ AM.
17
1p~40p(DS660)-SECA GB
11/10/04 1:26 PM
Page 21
Connecting an External Analog Component
CONNECTIONS
Example: Analog signal components such as a VCR or TV.
Audio Cable
Video Cable
1
2
3
Connect Video Out on the DVD player to Video
In on the TV.
Connect Video In on the DVD player to Video
Out on the external analog component.
Connect Audio In on the DVD player to Audio
Out on the external analog component.
• Be sure to match connector colors.
4
Press AUX on the remote control to select AUX 1
or AUX 2.
• Each time the button is pressed, the selection changes as
If the external analog
component has only
one Audio Out,
connect either left or
right.
Note
• If you have connected an external digital
component and also an Analog
component to Video In (1, 2) at the same
time, there will be video from AUX 1 even
when you select DIGITAL IN.
• If you have connected Audio In (L, R) to
1, connect Video In to 1 as well, and if
you have connected Audio In (L, R) to 2,
connect Video In to 2 also.
• When you select Aux 1 or 2, you are
selecting Video 1 or 2 inputs respectively.
follows: DIGITAL IN➝ AUX 1 ➝ AUX 2.
• You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD ➝ DIGITAL IN
➝ AUX1 ➝ AUX2 ➝ FM ➝ AM.
18
1p~40p(DS660)-SECA GB
11/10/04 1:26 PM
Page 22
Connecting the Antennas
FM antenna connection
FM Antenna (supplied)
1
2
Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal as a
temporary measure.
Slowly move the antenna wire around until you find a location where reception
is good, then fasten it to a wall or other rigid surface.
19
1p~40p(DS660)-SECA GB
11/10/04 1:26 PM
Page 23
AM antenna connection
1
2
3
CONNECTIONS
If AM reception is poor, connect an outdoor
AM antenna(not supplied).
AM Loop Antenna
(supplied)
Snap the tabs on the loop into the
slots of the base to assemble the
AM loop antenna.
1
2
Connect the AM loop antenna supplied to the AM and
terminals.
If reception is poor, connect an outdoor single vinyl-covered wire to the AM
terminal. (Keep the AM loop antenna connected).
Cooling Fan
The cooling fan dissipates the heat generated inside the unit so that the unit can be operated
normally. The cooling fan is activated automatically to supply cool air to the unit.
Please observe the following cautions for your safety.
• Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise
and may damage it.
• Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a
newspaper or cloth, heat may build up inside the unit and fire may result.)
20
1p~40p(DS660)-SECA GB
11/10/04 1:26 PM
Page 24
Before Using Your DVD Player
Your DVD player is capable of playing DVD, CD, MP3 and JPEG discs.Depending on the disc you
are using, these instructions may vary slightly. Read the instructions carefully before using.
1
Plug the power
cord into the AC
power supply.
2
Press the MODE
button so that the TV
indicator on the
remote control flashes.
TV
4
Press TV/VIDEO
button to select
VIDEO mode.
5
3
Press the POWER
button to turn on
the TV.
DVD RECEIVER
Press the MODE button so
that the DVD RECEIVER
indicator on the remote
control flashes.
TV
6
Press FUNCTION
button on the main
unit to select
DVD/CD mode.
DVD RECEIVER
To Operate the TV and DVD Player with a Single Remote Control
Press MODE button.
• Each time the button is pressed, the TV indicator (red) and the DVD Receiver indicator (green) will flash
alternately.
• You can operate the TV while the TV indicator is flashing and the DVD player while the DVD indicator is flashing.
• Buttons Enabled for TV Operation: POWER, CHANNEL, VOLUME, TV/VIDEO, and Numeric (0-9) buttons.
• By default, the remote control is set to work with Samsung TVs. See page 73 for more information on the
operation of the remote control.
21
1p~40p(DS660)-SECA GB
11/10/04 1:26 PM
Page 25
Disc terminology
Groups and tracks (DVD-AUDIO)
smaller sections called "tracks". Numbers are allotted to these sections.
These numbers are called "group numbers" and "track numbers".
GROUP 1
TRACK 1
TRACK 2
GROUP 2
TRACK 3
TRACK 1
TRACK 2
Titles and chapters (DVD-VIDEO)
• DVD-video is divided into several large sections called "titles" and smaller
sections called "chapters". Numbers are allotted to these sections.
These numbers are called "title numbers" and "chapter numbers".
TITLE 1
CHAPTER 1
CHAPTER 2
TITLE 2
CHAPTER 3
CHAPTER 1
CHAPTER 2
Tracks (Video and music CDs)
• Video and music CDs are divided into sections called "tracks".
Numbers are allotted to these sections. These numbers are called
"track numbers".
TRACK 1
Note
TRACK 2
TRACK 3
• In this manual, the instructions marked with "DVD (
TRACK 4
DVD
TRACK 5
)" are applicable to
DVD-VIDEO, DVD-AUDIO, and DVD-R/RW discs.
Where a particular DVD type is mentioned, it is indicated separately.
• Depending on the content of the disc, the initial screen may appear different.
22
CONNECTIONS
• DVD-audio is divided into several large sections called "groups" and
1p~40p(DS660)-SECA GB
11/10/04 1:26 PM
Page 26
Disc Playback
1
Press OPEN/CLOSE button to open the
disc tray.
2
Load one or more discs.
3
Press DISC SKIP button.
4
Close the compartment by pressing the
OPEN/CLOSE button again.
• Place a disc gently into the tray with the disc’s label
facing up.
• Rotate the carousel tray so you can load the third, fourth, and
fifth discs .
DVD
VCD
CD
• Playback starts automatically.
To stop playback,
press STOP during playback.
• If pressed once, “PRESS PLAY” is displayed and the
stop position will be stored in memory.
If PLAY/PAUSE (
) button or ENTER button is
pressed, playback resumes from the stop position.
(This function works only with DVDs.)
• If pressed twice, “STOP” is displayed, and if
PLAY/PAUSE (
) button is pressed, playback
starts from the beginning.
To temporarily pause playback,
press PLAY/PAUSE during playback.
• To resume playback, press PLAY/PAUSE (
23
button again.
)
1p~40p(DS660)-SECA GB
11/10/04 1:26 PM
Page 27
Selecting a Disc in the Disc changer
The DVD/CD function is automatically selected when Disc Skip is pushed.
CONNECTIONS
To select a specific disc, press the corresponding DIRECT PLAY
(1, 2, 3, 4, 5) buttons on the front panel or DISC SKIP on the
remote control, until the required disc indicator flashes.
• All the discs will be played in turn, starting with the one selected.
If you wish to play the current disc only, press REPEAT on the front
panel one or more times, until REPEAT : DISC is displayed.
If the disc selected is not loaded, the next disc is played automatically.
.
24
1p~40p(DS660)-SECA GB
11/10/04 1:26 PM
Page 28
MP3-CD Playback
Data CDs (CD-R, CD-RW) encoded in MP3 format can be played.
1
Press the
OPEN/CLOSE
button to open the
disc tray, and then
load the MP3 disc.
2
In Stop mode, use
to select
the album, and
then press the
ENTER button.
4
Press the STOP
button to stop
playback.
• The MP3 menu screen will appear
and playback will start.
• Depending on the MP3 disc, the
appearance of the menu may be
different.
3
To change the album,
use
to
select another album
in Stop mode, and
then press the
ENTER button.
• To select another album and track,
repeat Steps 2 and 3 above.
Note
• Depending on the recording mode, some MP3-CDs may not play.
• Table of contents of a MP3-CD varies depending on the MP3 track format
recorded on the disc.
25
1p~40p(DS660)-SECA GB
11/10/04 1:26 PM
Page 29
JPEG Disc Playback
Images captured with a digital camera or camcorder, or JPG files on a PC can be stored on a CD and then
played back with this unit.
Press the OPEN/CLOSE button to open the disc tray, and then
load the JPEG disc.
• Playback will start automatically and each image will show for 5 seconds before moving to
the next image.
OPERATION
To rotate the image
During playback, press
.
Rotate vertically
Rotate 90° counterclockwise
Rotate horizontally
Rotate 90° clockwise
26
1p~40p(DS660)-SECA GB
11/10/04 1:26 PM
Page 30
Displaying Disc Information
You can view disc playback information on the TV screen.
Press INFO button.
• Each time the button is pressed, the display changes as follows:
DVD
VCD
CD
MP3
JPEG
DVD RECEIVER
SMART NAVI
Something like you
Back for good
Love of my life
More than words
Display disappears
•
Display disappears
appears on the TV screen!
If this symbol appears on the TV screen while buttons are being operated, that
operation is not possible with the disc currently being played.
Display disappears
• What is a Group?
A movie contained in a DVD-AUDIO disc.
Note
• What is a Title?
• Depending on the disc, the disc
•
A movie contained in a DVD-VIDEO disc.
information display may appear different.
Depending on the disc, you can also
select DTS, DOLBY DIGITAL, or PRO
LOGIC.
• What is a Chapter?
Each title on a DVD disc is divided into several smaller sections called "chapters".
• What is a Track (File)?
A section of video or a music file recorded on a DVD-AUDIO, CD, or MP3-CD.
Screen Display
DVD display
VCD display
CD display
MP3 CD display
27
DVD DVD-AUDIO display
AUDIO
TITLE display
GROUP display
CHAPTER display
REPEAT PLAYBACK display
STEREO (L/R) display
TRACK (FILE) display
AUDIO LANGUAGE display
DOLBY DIGITAL display
ELAPSED TIME display
SUBTITLE display
ANGLE display
1p~40p(DS660)-SECA GB
11/10/04 1:26 PM
Page 31
Checking the Remaining Time
Press the REMAIN button.
• For checking the total and remaining time of a title or chapter
being played.
Each time the REMAIN button is pressed
DVDVIDEO
DVDAUDIO
GROUP ELAPSED
TITLE REMAIN
GROUP REMAIN
CHAPTER ELAPSED
TRACK ELAPSED
CHAPTER REMAIN
TRACK REMAIN
VCD
CD
MP3
TRACK ELAPSED
TRACK REMAIN
TRACK REMAIN
TRACK ELAPSED
TOTAL ELAPSED
TOTAL REMAIN
28
OPERATION
TITLE ELAPSED
1p~40p(DS660)-SECA GB
11/10/04 1:26 PM
Page 32
Fast/Slow Playback
Fast Playback
Press and hold
DVD
VCD
CD
MP3
.
• Each time the button is held down during playback,
the playback speed changes as follows:
Slow Playback
Press SLOW button.
• Each time the button is pressed during playback,
the playback speed changes as follows:
DVD
VCD
Note
29
• Reverse slow playback does not work with VCDs.
1p~40p(DS660)-SECA GB
11/10/04 1:26 PM
Page 33
Skipping Scenes/Songs
DVD
VCD
MP3
Briefly press
.
• Each time the button is pressed briefly during playback, the previous or next chapter, track, or
directory (file) will be played.
• You cannot skip chapters consecutively.
DVD
VCD
MP3
TITLE 01/05 CHAPTER 002/040
DVD RECEIVER
SMART NAVI
DVD RECEIVER
OPERATION
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
SMART NAVI
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
TITLE 01/05 CHAPTER 004/040
DVD RECEIVER
SMART NAVI
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
• When watching a VCD with a track
longer than 15 minutes, each time
is pressed, playback
will skip back or forward 5 minutes.
Note
• During fast playback of a CD or MP3-CD, sound is heard only at 2x speed,
and not at 4x, 8x, and 32x speeds.
• No sound is heard during slow playback and step motion playback.
30
1p~40p(DS660)-SECA GB
11/10/04 1:26 PM
Page 34
Repeat Playback
Repeat playback allows you to repeatedly play a chapter, title, track (song), or directory (MP3 file).
DVD
VCD
CD
MP3
JPEG
Press REPEAT button.
• Each time the button is pressed during playback, the repeat playback
mode changes as follows:
DVDVIDEO
MP3
31
JPEG
DVDAUDIO
VCD
CD
1p~40p(DS660)-SECA GB
11/10/04 1:26 PM
Page 35
To Select a Repeat Playback Mode in the Disc Information Screen
Press INFO button twice.
2
Press Cursor
button to move to
REPEAT PLAYBACK(
) display.
3
Press Cursor button to select the
desired Repeat Playback mode.
4
Press ENTER button.
DVD
OPERATION
1
VCD
CD
* For MP3 and JPEG discs, you cannot select
Repeat Play from the information display screen.
Repeat Playback Options
• CHAPTER : Repeatedly plays the selected chapter.
• TITLE : Repeatedly plays the selected title.
• GROUP : Repeatedly plays the selected group.
• RANDOM : Plays tracks in random order.
(A track that has already been played may be played again.)
• TRACK : Repeatedly plays the selected track.
• DIR : Repeatedly plays all tracks in the selected folder.
• DISC : Repeatedly plays the entire disc.
• OFF : Cancels Repeat Playback.
Note
• Repeat playback operation is not possible with version 2.0 VCD discs if PBC is turned on.
To use Repeat Playback on a VCD with PBC, you should set the PBC to OFF in the disc
menu. (See page 39.)
32
1p~40p(DS660)-SECA GB
11/10/04 1:26 PM
Page 36
A-B Repeat Playback
DVD
1
VCD
CD
Press INFO button
twice.
2
Press Cursor button
to move to REPEAT
PLAYBACK ( ) display.
4
Press ENTER
button at the end
of the desired
segment.
• For a VCD or CD, press INFO
button once.
3
Press Cursor , buttons
to select ‘A-’ and then press
ENTER button at the beginning
of the desired segment.
• When ENTER button is pressed,
the selected position will be stored in
memory.
• The specified segment will be played
repeatedly.
A-
A-B
REPEAT : A—B
A -?
REPEAT : A—
To return to normal playback, press Cursor
buttons to select
OFF.
,
Note
• The A-B Repeat function will not work on an MP3 or JPEG disc.
33
1p~40p(DS660)-SECA GB
11/10/04 1:26 PM
Page 37
Angle Function
This function allows you to view the same scene in different angles.
DVD
1
Press INFO button.
2
Press Cursor
button to move to
ANGLE (
)
display.
1/3
OPERATION
3
1/3
Press Cursor , or numeric buttons to
select the desired angle.
• Each time the button is pressed, the angle changes as follows:
1/3
2/3
3/3
Note
• The Angle function works only with discs on which multiple angles have been recorded.
34
1p~40p(DS660)-SECA GB
11/10/04 1:27 PM
Page 38
Zoom Function
This function allows you to enlarge a particular area of the displayed image.
Zoom (Screen Enlarge) Function
1
Press ZOOM
button.
2
Press Cursor , ,
, buttons to
move to the area
you want to enlarge.
DVD
3
VCD
Press ENTER
button.
• Each time the button is pressed, the
zoom level changes as follows:
SELECT ZOOM POSITION
Aspect Ratio
DVD
Press EZ VIEW button.
• Each time the button is pressed, the zoom function will switch between On
and Off.
• When a movie is played in Widescreen format, black bars at the top and
bottom of the TV screen can be removed by pressing the EZ VIEW button.
EZ VIEW
EZ VIEW OFF
Note
• This function will not work if the DVD is recorded with multi-camera angle format.
• Black bars may not disappear because some DVD discs have a built-in horizontal to vertical ratio.
35
1p~40p(DS660)-SECA GB
11/10/04 1:27 PM
Page 39
Bonus Group / Navigating Pages
Bonus Group
DVDAUDIO
Some DVD-Audio discs have an extra ‘bonus’ group that requires a 4-digit key
number to access. See the disc packaging for details and the-key number.
When you play a DVD-Audio disc that has a
bonus group, the key number input screen
appears automatically.
OPERATION
BONUS GROUP
KEY NUMBER :
Note
• If you eject the disc, switch the power off, or unplug the player, you will need to re-enter
the key number.
Navigating Pages
During playback, press the
remote control.
DVDAUDIO
button on the
• You can select the desired image from a DVD-Audio disc containing still images.
• With some discs, you may not be able to select images depending on how the
disc was manufactured.
36
1p~40p(DS660)-SECA GB
11/10/04 1:27 PM
Page 40
Selecting Audio/Subtitle Language
Audio Language Selection Function
1
Press INFO button
twice.
2
DVD
Press Cursor ,
buttons or numeric
buttons to select the
desired audio language.
• Depending on the number of languages on a
DVD disc, a different audio language
(ENGLISH, SPANISH, FRENCH, etc.) is
selected each time the button is pressed.
SP 2/3
FR 3/3
Subtitle Language Selection Function
1
Press INFO button
twice.
3
Press Cursor
button or numeric
buttons to select
the desired subtitle.
EN 1/3
EN 01/ 03
2
DVD
Press Cursor
button to move to
SUBTITLE ( )
display.
OFF
SP 02/ 03
FR 03/ 03
OFF / 03
37
Note
• Depending on the disc, the
Subtitle and Audio Language
functions may not work.
1p~40p(DS660)-SECA GB
11/10/04 1:27 PM
Page 41
Moving Directly to a Scene/Song
DVD
1
VCD
CD
Moving to a Title/Track
Press INFO button.
01/05
001/040
0:00:37
1/1
Press Cursor , buttons
or numeric buttons to select
the desired chapter and then
press ENTER button.
01/05
MP3
025/040
0:00:01
Press Cursor , buttons
or numeric buttons to select
the desired title/track and then
press ENTER button.
03/05
001/002
0:00:01
3
01/05
1/1
Moving to a Specific Time
5
1/1
025/040
1:17:30
001/040
0:00:01
1/1
Moving to a Specific Time
6
Press Cursor ,
buttons to move to
time display.
01/05
Press Cursor ,
buttons to move to
Chapter ( ) display.
1/1
Press the numeric
buttons to select the
desired time and then
press ENTER button.
01/05
028/040
1:30:00
1/1
JPEG
Press the numeric
buttons.
• The selected file will be played.
• An MP3 or JPEG disc cannot be moved
Note
• You can press
•
on the remote
control to move directly to the desired
title, chapter, or track.
Depending on the disc, you may not
be able to move to the selected title or
time.
from the disc information screen.
• When playing an MP3 or JPEG disc, you
cannot use
,
to move a folder.
To move a folder, press (Stop) and
then press
, .
38
OPERATION
Moving to a Chapter
4
2
Moving to a Chapter
1p~40p(DS660)-SECA GB
11/10/04 1:27 PM
Page 42
Using Disc Menu
You can use the menus for the audio language, subtitle language, profile, etc.
DVD menu contents differ from disc to disc.
DVD
1
In Stop mode,
press MENU
button.
• When playing a VCD (version 2.),
this toggles between PBC ON
and OFF.
3
Note
Press Cursor , ,
, buttons to
select the desired
item.
2
Press Cursor ,
buttons to move to
‘DISC MENU’ and then
press ENTER button.
• When you select the disc menu that is not
supported by the disc, the "This menu is not
supported" message appears on the screen.
4
Press ENTER
button.
PBC (Playback Control) Function
Press the MENU button while VCD 2.0 version disk is played.
Each time you press the button, "PBC ON" and "PBC OFF" will be repetitively selected in the display.
• PBC ON: This VCD disc is version 2.0. The disc is played back according to the menu screen.
Some functions may be disabled. When some functions are disabled, select "PBC OFF" to enable them.
• PBC OFF: This VCD disc is version 1.1. The disc is played back in the same way as with a music CD.
39
1p~40p(DS660)-SECA GB
11/10/04 1:27 PM
Page 43
Using the Title Menu
For DVDs containing multiple titles, you can view the title of each movie.
Depending on the disc, this function may either not work at all or may work differently.
DVD
1
In Stop mode,
press MENU
button.
2
Press Cursor ,
button to move to
‘Title Menu’.
3
Press ENTER
button.
• The title menu appears.
OPERATION
Press MENU button to exit the setup screen.
40
41P~76P(DS700)-GB-ELS
2004.10.16
2:31 PM
Page 40
Setting the Language
OSD language is set to English by default.
1
4
In Stop mode,
press MENU
button.
Press Cursor ,
button to select the
desired item and then
press ENTER button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
5
Press Cursor ,
button to select the
desired language and then
press ENTER button.
• Once the setup is complete, if the language was
3
Press ENTER
button.
Note
• To select other language, select
OTHER and enter the language code
of your country.
(See 42 page for language code of
countries)
AUDIO, SUB TITLE and DISC MENU
language can be selected.
set to English, OSD will be displayed in English.
Selecting the
OSD Language
Selecting the
Audio Language
(recorded on the disc)
Selecting the
Subtitle Language
(recorded on the disc)
Press RETURN button to return to the previous level.
41
Press MENU button to exit the setup screen.
Selecting the Menu Language
(recorded on the disc)
language you selected is
* Ifnottherecorded
on the disc, menu
language will not change even
if you set it to your desired
language.
41P~76P(DS700)-GB-ELS
2004.10.16
2:31 PM
Page 41
Language Code List
Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle”
and/or “Disc Menu” (See page 41).
Language
Code
Language
Code
Language
Code
Language
1027
Afar
1181
Frisian
1334
Latvian, Lettish
1506
Slovenian
1028
Abkhazian
1183
Irish
1345
Malagasy
1507
Samoan
1032
Afrikaans
1186
Scots Gaelic
1347
Maori
1508
Shona
1039
Amharic
1194
Galician
1349
Macedonian
1509
Somali
1044
Arabic
1196
Guarani
1350
Malayalam
1511
Albanian
1045
Assamese
1203
Gujarati
1352
Mongolian
1512
Serbian
1051
Aymara
1209
Hausa
1353
Moldavian
1513
Siswati
1052
Azerbaijani
1217
Hindi
1356
Marathi
1514
Sesotho
1053
Bashkir
1226
Croatian
1357
Malay
1515
Sundanese
1057
Byelorussian
1229
Hungarian
1358
Maltese
1516
Swedish
1059
Bulgarian
1233
Armenian
1363
Burmese
1517
Swahili
1060
Bihari
1235
Interlingua
1365
Nauru
1521
Tamil
1069
Bislama
1239
Interlingue
1369
Nepali
1525
Tegulu
1066
Bengali; Bangla
1245
Inupiak
1376
Dutch
1527
Tajik
1067
Tibetan
1248
Indonesian
1379
Norwegian
1528
Thai
1070
Breton
1253
Icelandic
1393
Occitan
1529
Tigrinya
1079
Catalan
1254
Italian
1403
(Afan) Oromo
1531
Turkmen
1093
Corsican
1257
Hebrew
1408
Oriya
1532
Tagalog
1097
Czech
1261
Japanese
1417
Punjabi
1534
Setswana
1103
Welsh
1269
Yiddish
1428
Polish
1535
Tonga
1105
Danish
1283
Javanese
1435
Pashto, Pushto
1538
Turkish
1109
German
1287
Georgian
1436
Portuguese
1539
Tsonga
1130
Bhutani
1297
Kazakh
1463
Quechua
1540
Tatar
1142
Greek
1298
Greenlandic
1481
Rhaeto-Romance
1543
Twi
1144
English
1299
Cambodian
1482
Kirundi
1557
Ukrainian
1145
Esperanto
1300
Kannada
1483
Romanian
1564
Urdu
1149
Spanish
1301
Korean
1489
Russian
1572
Uzbek
1150
Estonian
1305
Kashmiri
1491
Kinyarwanda
1581
Vietnamese
1151
Basque
1307
Kurdish
1495
Sanskrit
1587
Volapuk
1157
Persian
1311
Kirghiz
1498
Sindhi
1613
Wolof
1165
Finnish
1313
Latin
1501
Sangro
1632
Xhosa
1166
Fiji
1326
Lingala
1502
Serbo-Croatian
1665
Yoruba
1171
Faeroese
1327
Laothian
1503
Singhalese
1684
Chinese
1174
French
1332
Lithuanian
1505
Slovak
1697
Zulu
42
SETUP
Code
41P~80P(DS660)-SECA GB
11/10/04 1:30 PM
Page 44
Setting TV Screen type
Depending on your TV type (Wide Screen TV or conventional 4:3 TV), you can select the
TV's aspect ratio.
1
In Stop mode,
press MENU
button.
3
Press Cursor button
to move to ‘TV
DISPLAY’ and then
press ENTER button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
4
Press Cursor ,
button to select the
desired item and then
press ENTER button.
• Once the setup is complete, you will
be taken to the previous screen.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
43
41P~80P(DS660)-SECA GB
11/10/04 1:30 PM
Page 45
Adjusting the TV Aspect Ratio (Screen Size)
The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of wide screen and high
definition TVs is 16:9. This ratio is called the aspect ratio. When playing DVDs recorded in different
screen sizes, you should adjust the aspect ratio to fit your TV or monitor.
✱ For a standard TV, select either "4:3LB" or "4:3PS" option according to
personal preference. Select "16:9" if you have a widescreen TV.
WIDE
: Select this to view a 16:9 picture in the full-screen
mode on your widescreen TV.
•You can enjoy the widescreen aspect.
4:3LB
(4:3 Letterbox)
: Select this to play a 16:9 picture in the letter box
mode on a conventional TV.
•Black bars will appear at the top and bottom of the screen.
: Select this to play a 16:9 picture in the pan & scan
mode on a conventional TV.
SETUP
4:3PS
(4:3 Pan&Scan)
•You can see the central portion of the screen only (with the
sides of the 16:9 picture cut off).
Note
• If a DVD is in the 4:3 ratio, you cannot view it in widescreen.
• Since DVD discs are recorded in various image formats, they will look different depending on
the software, the type of TV, and the TV aspect ratio setting.
44
41P~80P(DS660)-SECA GB
11/10/04 1:30 PM
Page 46
Setting Parental Controls (Rating Level)
Use this to restrict playback of adult or violent DVDs you do not want children to view.
1
45
In Stop mode,
press MENU
button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
41P~80P(DS660)-SECA GB
3
11/10/04 1:30 PM
Press Cursor
button to move to
‘PARENTAL’ and then
press ENTER button.
4
Page 47
Press Cursor ,
buttons to select the
desired rating level and
then press ENTER button.
• If you have selected Level 6, you
•
cannot view DVDs with Level 7 or
higher.
The higher the level, the closer the
content is to violent or adult material.
5
Enter the password
and then press
ENTER button.
• The password is set to "7890" by default.
• Once the setup is complete, you will be
taken to the previous screen.
SETUP
Note
• This function works only if a DVD disc contains rating level information.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
46
41P~80P(DS660)-SECA GB
11/10/04 1:30 PM
Page 48
Setting the Password
You can set the password for the Parental (rating level) setting.
1
Note
47
Press MENU button.
2
• The password is set to "7890" by default.
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
41P~80P(DS660)-SECA GB
3
11/10/04 1:30 PM
Press Cursor button to
move to ‘PASSWORD’
and then press ENTER
button.
4
Page 49
Press ENTER
button.
5
Enter the password
and then press
ENTER button.
• Enter the old password, a new
password, and confirm new password.
• The setting is complete.
SETUP
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
48
41P~80P(DS660)-SECA GB
11/10/04 1:30 PM
Page 50
Setting the Wallpaper
JPEG
VCD
DVD
While watching a DVD, VCD or JPEG CD, you can set the image you like as background wallpaper.
Setting the Wallpaper
1
During playback, press
PLAY/PAUSE button
when an image you
like appears.
2
Press LOGO
button.
• “COPY LOGO DATA” will be
displayed on the TV screen.
COPY LOGO DATA
PAUSE
3
The power will turn off
and then back on and
the disc tray will open
automatically.
• The selected wallpaper will be
displayed.
49
4
Press OPEN/
CLOSE to close
the disc tray.
• You can repeat Steps 1 and 2 to
set up to 3 wallpapers.
Select this to set the
Samsung Logo image as
your wallpaper.
Select this to set the desired
image as your wallpaper.
41P~80P(DS660)-SECA GB
11/10/04 1:30 PM
Page 51
To Change the Wallpaper
4
Press to select
the desired ‘USER’,
and then press
ENTER.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
5
Press MENU
button to exit the
setup screen.
3
Press Cursor
button to move to
‘LOGO’ and then
press ENTER button.
SETUP
1
In Stop mode,
press MENU
button.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
50
41P~80P(DS660)-SECA GB
11/10/04 1:30 PM
Page 52
DVD Playback Mode
Some DVD-Audio discs contain DVD-Video as well as DVD-Audio.
To play back the DVD-Video portion of the DVD-Audio disc, set the unit to DVD-Video mode.
1
Press the MENU
button while the
disc tray is open.
3
Press Cursor
button to move to
‘DVD TYPE’ and then
press ENTER button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
4
Press Cursor ,
button to move to
‘DVD VIDEO’ and then
press ENTER button.
• Set steps 1 ~ 4 again if you want to
switch to DVD AUDIO Play mode.
When Selecting DVD Play Mode:
• DVD VIDEO : set to play the DVD video
•
contents contained in DVD
audio disc.
DVD AUDIO : set to play the default DVD
audio.
Note
• DVD Play mode is set to DVD
Audio as factory default setting.
51
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
41P~80P(DS660)-SECA GB
11/10/04 1:30 PM
Page 53
AV SYNC Setup
Video may look slower than the audio if it is connected with digital TV.
In this case, adjust the delay time of audio to optimal status to fit the video.
1
Press the MENU button.
• Setup menu appears.
• AV-SYNC screen appears.
• 'Audio' menu appears.
4
Press Cursor
, buttons
to select the Delay Time of
AV-SYNC and then press the
ENTER button.
• You can set the audio delay time between 0 ms
and 300 ms. Set it to the optimal status.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
52
SETUP
3
Press Cursor ,
buttons
to move to ‘AV-SYNC’ and
then press ENTER button.
2
Press Cursor , buttons
to move to ‘Audio’ and then
press ENTER button.
41P~80P(DS660)-SECA GB
11/10/04 1:30 PM
Page 54
Setting the Speaker Mode
Signal outputs and frequency responses from the speakers will automatically be adjusted
according to your speaker configuration and whether certain speakers are used or not.
1
In Stop mode,
press MENU
button.
3
In the Speaker
Setup, press the
ENTER button again.
2
Press Cursor
button to move to
‘Audio’ and then
press ENTER button.
4
Press Cursor , ,
, buttons to move
to the desired
speaker and then
press ENTER button.
• For C, LS, and RS, each time the button
•
is pressed, the mode switches
alternately as follows: SMALL ➝ NONE.
For L and R, the mode is set to SMALL.
SMALL : Select this when using the speakers.
NONE : Select this when no speakers are installed.
Note
• Depending on PRO LOGIC and STEREO, the speaker mode may vary.
53
41P~80P(DS660)-SECA GB
11/10/04 1:30 PM
Page 55
Setting the Test Tone
Use the Test Tone feature to check the speaker connections and to adjust the speaker levels.
1
In Stop mode,
press MENU
button.
2
Press Cursor
button to move to
‘Audio’ and then
press ENTER button.
3
Press Cursor button
to move to ‘TEST
TONE’ and then press
ENTER button.
• The test tone will be sent to L ➝ C ➝
R ➝ RS ➝ LS ➝ SW in that order.
If the ENTER button is pressed again
at this time, the test tone will stop.
SETUP
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Alternate method: press the TEST TONE button on the remote.
Press TEST TONE button.
•
•
Test tone will be produced as follows:
When playing a DVD or CD, this will work
only in Stop mode.
Use this function to check that each speaker is
correctly connected and that there is no problem.
To end the test tone,
press TEST TONE button again.
L: Front Speaker (L)
R: Front Speaker (R)
C: Center Speaker
LS: Rear Speaker (L)
SW: Subwoofer
RS: Rear Speaker (R)
Multi-Channel Pro Logic Mode
Start
54
41P~80P(DS660)-SECA GB
11/10/04 1:30 PM
Page 56
Setting the Delay Time
If the speakers cannot be placed at equal distances from the listening position, you can adjust the
delay time of the audio signals from the center and rear speakers.
1
In Stop mode,
press MENU
button.
2
Press Cursor button
to move to ‘Audio’ and
then press ENTER
button.
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can enjoy the best sound if
the distance between you and each speaker is the same. Since the sounds
arrive at the listening position at different times depending on the
placement of speakers, you can adjust this difference by adding a delay
effect to the sound of the Center and Surround Speakers.
Note
• With
•
55
(Dolby Pro Logic II), the delay time may be different for each
mode.
With AC-3 and DTS, the delay time can be set between 00 and 15mSEC.
41P~80P(DS660)-SECA GB
3
11/10/04 1:30 PM
Press Cursor button
to move to ‘DELAY
TIME’ and then press
ENTER button.
4
Page 57
Press Cursor , ,
, buttons to move
to the desired
speaker and then
press ENTER button.
5
Press Cursor ,
to set the Delay
time.
• You can set the delay time for C
between 00 and 05mSEC and for
LS and RS between 00 and
15mSEC.
SETUP
• Setting CENTER SPEAKER
If the distance of Dc is equal to or longer than the
distance of Df in the figure, set the mode as 0ms.
Otherwise, change the setting according to the table.
Distance between Df and Dc
0 inch
13.6 inches
27.2 inches
40.8 inches
4.5 feet
5.6 feet
Delay Time
0 ms
1 ms
2 ms
3 ms
4 ms
5 ms
• Setting REAR (SURROUND) SPEAKERS
If the distance of Df is equal to the distance of Ds
in the figure, set the mode as 0ms. Otherwise,
change the setting according to the table.
Distance between Df and Ds
0 inch
40.8 inches
6.7 feet
10.0 feet
13.4 feet
16.7 feet
Delay Time
0 ms
3 ms
6 ms
9 ms
12 ms
15 ms
CENTER SPEAKER
Reflector Front/Rear (L)
Reflector Front/Rear (R)
Subwoofer Speaker
It is desirable to place all speakers within this circle.
Df: The distance from FRONT SPEAKER
Dc: The distance from CENTER SPEAKER
Ds: The distance from SURROUND SPEAKER
56
41P~80P(DS660)-SECA GB
11/10/04 1:30 PM
Page 58
Setting the Audio Quality
You can adjust the balance and level for each speaker.
Method 1
When adjusting the audio quality using the setup screen
1
In Stop mode,
press MENU
button.
3
Press Cursor button
to move to ‘SOUND
EDIT’ and then press
ENTER button.
2
Press Cursor
button to move to
‘Audio’ and then press
ENTER button.
4
Press Cursor ,
buttons to select and
adjust the desired item.
Press the , buttons
to adjust the settings.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
57
41P~80P(DS660)-SECA GB
Method 2
11/10/04 1:30 PM
When manually adjusting with the SOUND EDIT button
Adjusting Front Speaker Balance
1
TITLE
Page 59
Press SOUND
EDIT button and
then press Cursor
, .
CHAP PRGM RDS RT
ST
TUNED
Adjusting Rear Speaker Balance
2
TITLE
Press SOUND
EDIT button and
then press Cursor
, .
CHAP PRGM RDS RT
ST
kHz
MHz
Adjusting Rear Speaker Level
TITLE
CHAP PRGM RDS RT
ST
TUNED
3
TITLE
kHz
MHz
Press SOUND
EDIT button and
then press Cursor
, .
CHAP PRGM RDS RT
ST
TUNED
kHz
MHz
Adjusting Subwoofer Speaker Level
5
TITLE
kHz
MHz
SETUP
4
Press SOUND
EDIT button and
then press Cursor
, .
TUNED
Adjusting Center Speaker Level
Press SOUND
EDIT button and
then press Cursor
, .
CHAP PRGM RDS RT
ST
TUNED
kHz
MHz
Note
• The adjustments will appear on the main unit, not on your TV screen.
Adjusting Front/Rear Speaker Balance
• You can select between 00 and –06 and OFF.
• The volume decreases as you move closer to –6.
Adjusting Center/Rear/Subwoofer Speaker Level
• The volume level can be adjusted in steps from +6dB to –6dB.
• The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.
58
41P~80P(DS660)-SECA GB
11/10/04 1:30 PM
Page 60
Setting the DRC (Dynamic Range Compression)
You can use this function to enjoy Dolby Digital sound when watching movies at
low volume at night.
1
59
In Stop mode,
press MENU
button.
2
Press Cursor
button to move to
‘Audio’ and then
press ENTER
button.
41P~80P(DS660)-SECA GB
3
11/10/04 1:30 PM
Press Cursor
button to move to
‘DRC’ and then
press ENTER
button.
Page 61
4
Repeatedly
press Cursor
, to adjust
the ‘DRC’.
• Pressing the Cursor
button increases
the compression, and pressing the
Cursor
reduces it.
SETUP
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
60
41P~80P(DS660)-SECA GB
11/10/04 1:30 PM
Page 62
Dolby Pro Logic II Mode
You can select the desired Dolby Pro Logic II audio mode.
Press
•
Note
PL II MODE button.
Each time the button is pressed, the mode changes as follows.
• When selecting Pro Logic II mode, connect your external device to the
AUDIO INPUT jacks (L and R) on the player. If you connect to only one of
the inputs (L or R), you cannot listen to 5.1 channel surround sound.
PRO LOGIC II
• MUSIC: When listening to music, you can experience sound effects as if you are listening to the actual performance.
• CINEMA: Adds realism to the movie soundtrack.
• PRO LOGIC: You will experience a realistic multi-channel effect, as if using five speakers,
while using just the front leftand right speakers.
• MATRIX: You will hear 5.1 channel surround sound.
• STEREO: Select this to listen to sounds from the front left and right speakers and the subwoofer only.
61
41P~80P(DS660)-SECA GB
11/10/04 1:30 PM
Page 63
Dolby Pro Logic II Effect
This function works only in Dolby Pro Logic MUSIC mode.
1
Press
PL II MODE
button to select ‘MUSIC’
mode.
2
Press
PL II EFFECT button
and then press Cursor ,
buttons to select the mode.
• You can select either 0 or 1.
3
Press
PL II EFFECT button
and then press Cursor ,
buttons to select the next mode.
Note
• You can select between 0 and 6.
SETUP
• You can select between 0 and 7.
4
Press
PL II EFFECT button
and then press Cursor ,
buttons to select the mode.
• When playing a DVD disc encoded with two or more channels, multi-channel mode will be
selected automatically and
(Dolby Pro Logic II) button does not work.
• PANORAMA: This mode extends the front stereo image to include the surround speakers for
an exciting "wraparound" effect with side wall imaging.
• CENTER WIDTH: Sound is output to the center speaker only. The front left and right speakers
produce phantom sound.
• DIMENSION: Incrementally adjusts the sound field (DSP) from the front or rear.
62
41P~80P(DS660)-SECA GB
11/10/04 1:30 PM
Page 64
Setting the RRSS(Rear Reflecting Surround System)
• By setting up the RRSS function just once, the speaker distance, channel level, and rear sound
reflection effect are automatically set and create an optimal listening environment.
• This function works only in DVD/CD mode.
1
3
Connect the RRSS
Microphone to the
RRSS input jack.
Press the RRSS
button.
2
4
Place the RRSS
Microphone at the
listening position.
When "REMOVE MIC"
appears on the display,
disconnect the RRSS
Microphone.
• A speaker tone will be heard once
•
•
from each speaker in the order of
L ➝ C ➝ R ➝ RS ➝ LS ➝ SW, and
then the newly set error tone will be
heard again from L ➝ R.
An optimal listening environment will
be set up automatically.
It takes about 3 to 4 minutes to
complete the RRSS setup.
Tone Output
A piano sound will be heard and the
setup will be completed.
Note
• The RRSS button works as the RRSS setup function shown above if the RRSS Microphone is connected, and works as the rear sound
reflection effect function if the microphone is removed.
• If you are installing the system for the first time or if you have initialized the system, "NO MEASURED DATA" will appear on the display
when you press the RRSS button without connecting the RRSS Microphone.
• During the RRSS setup, the output volume of the tone is fixed and you cannot use the volume control buttons to adjust the output level.
• If you remove the RRSS Microphone during the RRSS setup, the setup will be cancelled.
• Place the front and left speakers (L/R) toward the side walls so that the rear speaker sound is reflected against the walls.
63
41P~80P(DS660)-SECA GB
11/10/04 1:30 PM
Page 65
drawing is provided for illustration
* This
purposes only and the actual appearance
of the items depicted may vary.
Auto Sound Calibration
Microphone
1
2
DIRECT PLAY
3
4
5
L: Front Speaker (L)
C: Center Speaker
LS: Rear Speaker (L)
To select the RRSS that you have set
Briefly press the RRSS button.
(If you have set the RRSS for the first time according to
• Your selection will toggle between "REAR REFLECTING
•
ON" and "REAR REFLECTING OFF" on the display.
Select "REAR REFLECTING ON" to listen using the
RRSS setting and select "REAR REFLECTING OFF" to
listen to the disc currently being played in its original
setting.
To enable or disable the sound logo
When you turn on the power, a sound logo will be heard,
indicating that the disc reading is completed and the player is
in its optimal condition to play the disc.
1. Press and hold the RRSS button.
• "S.LOGO ON" or "S.LOGO OFF" appears on the
display.
2. Briefly press the RRSS button.
• Each time you press the button, your selection toggles
between "S.LOGO ON" and "S.LOGO OFF".
• Select "S.LOGO ON" to enable the sound logo and
select "S.LOGO OFF" to disable the sound logo.
To check the RRSS that you have set
1. Press and hold the RRSS button twice.
• "CHECK" appears on the display.
2. Next,briefly press the RRSS button.
• The speaker distance and level value for each channel
Caution
• If the system is installed at a location where sound cannot
be reflected (e.g., an open space without walls), the speaker
distance, channel level, and rear sound reflection effect may
be set incorrectly during the RRSS setup.
will be displayed.
To cancel the RRSS setup
Press the RRSS button.
• The tone output stops, "CANCEL" appears on the
display, followed by "REMOVE MIC", and then the
setup will be cancelled.
64
SETUP
Steps 1 to 3 on the previous page)
R: Front Speaker (R)
SW: Subwoofer
RS: Rear Speaker (R)
41P~80P(DS660)-SECA GB
11/10/04 1:30 PM
Page 66
Rear Reflecting Surround System
You can enjoy realistic sound reproduction that approximates 5.1-channel surround
sound using the front speakers.
1
Press the RRSS button
to select "REAR
REFLECTING ON".
2
To cancel the rear
sound reflection
function, press the
RRSS button again to
select "REAR
REFLECTING OFF".
• The rear sound reflection function
will be enabled and you can enjoy
the 5.1-channels surround sound.
What is RRSS?
(RRSS: Rear Reflecting Surround System)
• The sound from the front/rear speakers, which are located in the front,
is first reflected against the side walls (or the ceiling) and then reflected
against the rear wall before reaching the listener.
It allows you to enjoy the realistic sound reproduction equal to that of a
5.1-channel speaker system using only 3 speakers.
• It not only increases space efficiency but eliminates the need for
speaker cable arrangement because it does not require installation of
rear speakers.
65
41P~80P(DS660)-SECA GB
11/10/04 1:30 PM
Page 67
Live Surround Mode
You can use the magic sound field to listen to 2-channel stereo sources in realistic
5.1-channel surround sound.
1
3
Play a Dolby Surround or
2-Channel disc, or listen
to the radio.
• CINEMA : A powerful sound field effect as in a movie theater.
• STADIUM : A sound field effect of being at a soccer or baseball game.
• LIVE : A sound field effect with a spatial feeling as in a live concert hall.
• JAZZ : Select this when listening to jazz.
• ROCK : Select this when listening to rock music.
• CLASSIC : Select this when listening to classical music.
• DISCO : A sound field with a powerful bass as in a disco club.
• SUPER 5.1 : Select this to listen to a 2 channel source in 5.1 channels.
• LSM OFF : If you press the Live Surround Mode button on the main
unit, the mode display will appear on the display in the same order
as pressing the LSM + button on the remote control.
SETUP
To cancel the magic sound field
function, press and hold the
Live Surround Mode button on
the main unit for longer than 1
second.
2
Each time you press the LSM +
button, the mode display
changes in the order shown
below. Each time you press the
LSM – button, the mode display
changes in the reverse order.
Note
• Depending on the disc being played, the effect of each
sound field may vary.
• You cannot select SUPER 5.1 mode when playing a
DVD disc recorded in more than 2 channels.
66
41P~80P(DS660)-SECA GB
11/10/04 1:30 PM
Page 68
SURROUND PLUS / Virtual Headphone
The Surround Plus function works when the headphone is not connected, and the
Virtual Headphone function works when the headphone is connected.
SURROUND PLUS
Enable the Surround plus function if you have installed the system at a location where sound cannot be reflected.
You will enjoy the same experience that you can at a theater.
1
Press the SURR. PLUS
button to select the surround
plus function.
2
To cancel the surround plus
function, press the
SURR. PLUS button again.
• It helps to deliver more effective 3D sound.
Note
• This function works only with DVDs recorded in more than 2 channels.
• The surround plus function does not work with 2-channel sources such as music CDs or MP3 CDs.
Virtual Headphone
You can enjoy a realistic sound very similar to that of a 5.1-channel sound system using regular stereo headphones.
1
Press the V-H/P button to
select "VIRTUAL ON".
• You can enjoy the feeling of being in the middle of
a concert hall using headphones.
67
2
To cancel this function,
press the V-H/P button to
select "VIRTUAL OFF".
• You can listen in a regular 2-channel stereo.
41P~80P(DS660)-SECA GB
11/10/04 1:30 PM
Page 69
SUPER 5.1
You can reproduce 2-channel sources, such as VCDs, CDs, and radio broadcasts,
in realistic 5.1-channel surround sound.
1
Press the SUPER 5.1
button to select
"SUPER 5.1".
2
To cancel this
function, press the
SUPER 5.1 button to
select "SUPER OFF".
• A 2-channel source will be reproduced
in 5.1 channels.
SETUP
Note
• If you insert a DVD recorded in more than 2 channels and press the
SUPER 5.1 button, "THIS FUNCTION APPLIES ONLY 2CH SOURCE"
will appear on the display and the function will not work.
68
41P~80P(DS660)-SECA GB
11/10/04 1:30 PM
Page 70
Listening to Radio
You can listen to the chosen band (FM, AM broadcast stations) by using either
the automatic or manual tuning operation.
Remote Control Unit
1
2
Press TUNER/
BAND button.
• The selection toggles back
Tune in to the
desired station.
Automatic Tuning 1
and forth between "FM" and
"AM" each time the
TUNER(BAND) button is
pressed.
Automatic Tuning 2
Manual Tuning
When
is pressed, a
preset broadcast station is
selected.
Press and hold
to
automatically search for
active broadcasting stations.
Briefly press
to
increase or decrease the
frequency incrementally.
Main Unit
1
Press the Function
button to select the
desired band (FM, AM).
2
Select a broadcast
station.
Press the STOP ( )
button to select
PRESET and then press
button to select the preset station.
Automatic Tuning 1
Press the STOP ( ) button
to select "MANUAL" and
then press and hold
button to
automatically search the band.
Automatic Tuning 2
STOP ( ) to select
Manual Tuning Press
MANUAL and then briefly
press
to tune in to a lower or
higher frequency.
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
69
• Each time the button is pressed, the sound switches between "STEREO" and "MONO".
• In a poor reception area, select MONO for a clear, interference-free broadcast.
41P~80P(DS660)-SECA GB
11/10/04 1:30 PM
Page 71
Presetting Stations
Y
•15 FM stations
•15 AM stations
o
u
• FM
• AM
Frequency Modulation
Medium Wave
Example: Presetting FM 89.1 in the memory
1
Press the
TUNER(BAND)
button and select
the FM band.
• Each time the button is pressed,
the band switches between
"FM" and "AM".
4
Press
to select preset
number.
15.
3
• Refer to Step 2 on page 69 to
Press the TUNER
MEMORY button.
• “PRGM” flashes in the display.
automatically or manually tune in
to a station.
5
Press the TUNER
MEMORY button
again.
6
To preset another
station, repeat
steps 2 to 5.
• Press the TUNER MEMORY button before
RADIO OPERATION
• You can select between 1 and
2
Press
to
select "89.10".
‘PRGM’ disappears from the display.
• ‘PRGM’ disappears from the display and
the station is stored in memory.
To tune in to a preset station, press
remote control to select a channel.
on the
70
41P~80P(DS660)-SECA GB
11/10/04 1:30 PM
Page 72
Convenient Functions
Sleep Timer Function
You can set the time that the DVD player will shut itself off.
Press SLEEP button.
• "SLEEP" will be displayed. Each time the button is pressed,
the preset time changes as follows: 10 ➝ 20 ➝ 30 ➝ 60 ➝
90 ➝ 120 ➝ 150 ➝ OFF.
TITLE
CHAP PRGM RDS RT
ST
TUNED
kHz
MHz
To confirm the sleep timer setting, press SLEEP button.
•The remaining time before the DVD player will shut itself off is displayed.
•Pressing the button again changes the sleep time from what you have set
earlier.
To cancel the sleep timer, press SLEEP button until
OFF appears on the display.
71
41P~80P(DS660)-SECA GB
11/10/04 1:30 PM
Page 73
Adjusting Display Brightness
You can adjust the brightness of the display on the
main unit so it won't interfere with your movie viewing.
Press DIMMER button.
• Each time the button is pressed, the brightness changes as
follows: SLIGHTLY DARK ➞ DARK ➞ BRIGHT.
Mute Function
This is useful when answering the door or a
telephone call.
Press MUTE button.
MISCELLANEOUS
• ‘MUTE ON’ appears in the display.
• To restore the sound, press the button again to
select ‘MUTE OFF’.
TITLE
CHAP PRGM RDS RT
ST
TUNED
kHz
MHz
72
41P~80P(DS660)-SECA GB
11/10/04 1:30 PM
Page 74
Operating a TV with the Remote Control
When operating a TV with the remote control
1
Press the MODE button to make the TV indicator
on the remote control flash.
TV DVD RECEIVER
2
Press POWER button to turn on the TV.
3
Point the remote control toward the TV.
4
While holding down POWER, enter the code
corresponding to your brand of TV.
• If the code matches the TV's code, the TV will be turned off.
• If there is more than one code listed for your TV in the table,
enter one at a time to determine which code works.
Example: For a Samsung TV
While holding down POWER, use the number buttons to enter 00,
01, 02, 03, 04, and 05.
5
Pont the remote control toward the TV and press
POWER. If the TV turns off or on, the setting is
complete.
• You can use the TV POWER, VOLUME, CHANNEL, and Numeric
buttons (0~9).
Note
• The remote control may not work on some brands of TVs. Also some operations may not be
73
possible depending on your brand of TV.
• If you do not set the remote control with the code for your brand of TV, the remote control will
work on a Samsung TV by default.
41P~80P(DS660)-SECA GB
11/10/04 1:30 PM
Page 75
TV Brand Code Number
No.
Brand
Code
No.
1
SAMSUNG
00(Initial Value), 01, 02, 03, 04, 05, 73
2
ANAM
06~11, 59
3
DAEWOO
4
LG
5
HITACHI
23, 40, 41, 49
6
JVC
24, 55
7
SHARP
27, 33, 34, 35, 54
8
SONY
9
TOSHIBA
10
SANYO
27, 30, 31, 32
11
MITSUBISHI
05, 27, 28
Brand
Code
30
BRANDT
41
31
FERGUSON
41
12~18, 20, 21
32
PIONEER
41, 48, 74
05, 20, 21, 22, 53
33
TELEAVA
41
34
FINLUX
05, 42, 47
35
FISHER
31
36
AKAI
31
27, 36
37
YOKO
05
27, 37, 42, 43, 44, 46
38
PHONOLA
05, 45, 47
39
RADIOLA
05, 45
40
SCHNEIDER
05
12
MATSUSHITA
09, 26
41
NEWSAN
58
13
TELEFUNKEN
41, 49, 51, 57
42
CONTINENTAL EDISON
49
14
RCA
29, 61
43
SALORA
48
15
PANASONIC
07, 09, 26, 48, 49, 50
44
SELECO
48
SABA
40, 41, 47, 48, 49
45
NOKIA
48
17
PHILIPS
05, 45, 47, 64, 65, 66, 67, 68, 69
46
REX
48
18
GRUNDIG
39, 42, 46, 70, 71, 72
47
MIVAR
46
19
ZENITH
38
48
IMPERIAL
46
20
MIVAL
52
49
CGE
46
21
NOBLEX
56
50
BANG & OLUFSEN
47
22
EMERSON
19
51
BRIONVEGA
47
23
MAGNAVOX
25
52
FORMENTI
47
24
LOEWE
05, 60
53
METZ
47
25
THOMSON
40, 41, 49, 62, 63
54
WEGA
47
26
NORDMENDE
40, 41, 49
55
RADIOMARELLI
47
27
LOEWE OPTA
36, 47, 05
56
SINGER
47
28
BLAUPUNKT
39
57
SINUDYNE
47
29
SIEMENS
39
MISCELLANEOUS
16
74
41P~80P(DS660)-SECA GB
11/10/04 1:30 PM
Page 76
Before Calling for Service
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not
listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact
the nearest authorized dealer or Samsung Electronics Service Center.
Symptom
Disc tray does not open.
Playback does not start.
Check/Remedy
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
• Is the region code of the disc "1" or "ALL"?
DVD discs purchased from abroad may not be playable.
• CD-ROMs and DVD-ROMs cannot be played on this DVD
•
player.
Make sure that the rating level is correct.
Playback does not start
• Are you using a deformed disc or a disc with scratches on
the surface?
immediately when the
• Wipe the disc clean.
Play/Pause button is pressed.
Sound is not produced.
• No sound is heard during fast playback, slow playback, and step
motion playback.
• Are the speakers connected properly? Is the speaker setup
correctly customized?
• Is the disc severely damaged?
Sound can be heard only
from a few speakers and
not all six.
Picture does not appear, sound
is not produced, or the disc
tray opens 2 to 5 seconds later.
Dolby Digital 5.1 CH
Surround Sound is not
produced.
75
• When listening to a CD or radio, sound is output to the front
•
•
speakers (L/R) only. Select "PRO LOGIC II" by pressing
(Dolby Pro Logic II) on the remote control to use all six speakers.
Make sure that the DVD disc is 5.1-CH compatible.
If you set C, SL, and SR to NONE in the speaker mode in the
audio setup of the setup screen, no sound is heard from the
center speaker and the front left and right speakers. Set C, SL,
and SR to SMALL.
• Was the DVD player suddenly moved from a cold place to a warm
one? When condensation forms inside the player, remove the disc
and let the player stand for 1 or 2 hours with the power on. (You
can use the player again after condensation disappears.)
• Is there a "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital
•
5.1 CH Surround Sound is produced only if the disc is recorded
with 5.1 channel sound.
Is the audio language correctly set to DOLBY DIGITAL 5.1-CH in
the information display?
41P~80P(DS660)-SECA GB
11/10/04 1:30 PM
Symptom
• Disc is rotating but no
picture is produced.
• Picture quality is poor and
picture is shaking.
Page 77
Check/Remedy
• Is the TV power on?
• Are the video cables connected properly?
• Is the disc dirty or damaged?
• A poorly manufactured disc may not be playable.
The remote control does not • Is the remote control being operated within its operation range of
angle and distance?
work.
• Are the batteries exhausted?
Audio language and
subtitles do not work.
• Audio language and subtitles will not work for DVDs not containing
Menu screen does not appear even
when the menu function is selected.
• Are you using a disc that does not contain menus?
them. And depending on the disc, they may work differently.
Aspect ratio cannot be
changed.
• You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX
Can't receive radio
broadcast.
• The main unit is not working.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM
(Example: The power goes out or
a strange noise is heard.)
antenna in an area with good reception.
• Turn off the power and hold the
button on the main unit for
longer than 5 seconds.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
• While “NO DISC” message appears on the display of main unit, hold
The password for rating
level has been forgotten.
the main unit's
button for longer than 5 seconds. “INITIALIZE”
appears on the display and all settings will return to the default values.
• Press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
76
MISCELLANEOUS
• The DVD player is not
working normally.
mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3
ratio only. Refer to the DVD disc jacket and then select the
appropriate function.
41P~80P(DS660)-SECA GB
11/10/04 1:30 PM
Page 78
Cautions on Handling and Storing Discs
Small scratches on the disc may reduce sound and picture quality or cause skipping.
Be especially careful not to scratch discs when handling them.
Handling discs
Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints will not
get on the surface.
Do not stick paper or tape on the disc.
Disc Storage
Keep in a cool
ventilated area
Do not keep in
direct sunlight
Caution
Keep in a clean
Protection jacket.
Store vertically.
• Do not allow the discs to become contaminated with dirt.
• Do not load cracked or scratched discs.
Handling and Storing Discs
When you get fingerprints or dirt on the disc, clean it
with a mild detergent diluted in water and wipe with a
soft cloth.
• When cleaning, wipe gently from the inside to the outside of the disc.
Note
• Condensation may form if warm air comes into contact with cold parts
inside the player. When condensation forms inside the player, the player
may not operate correctly. If this occurs, remove the disc and let the
player stand for 1 or 2 hours with the power on.
77
41P~80P(DS660)-SECA GB
11/10/04 1:30 PM
Page 79
Specifications
G
E
N
E
R
A
L
T
F U
N
M E
R
T
A U
M N
E
R
Power Consumption
Weight
Dimensions (W x H x D)
Operating Temperature Range
Operating Humidity Range
Usable Sensitivity
S/N Ratio
Distortion
Usable Sensitivity
S/N Ratio
Distortion
VIDEO
Component Video
INPUT
V
I
D
E
O
O
U
T
P
U
T
A
M
P
L
I
F
I
E
R
Composite Video
Component Video
S-VIDEO
Front speaker output
Center speaker output
Rear speaker output
Subwoofer speaker output
Frequency range
S/N Ratio
Channel separation
Input sensitivity
100W
12.8Ibs
17.2 x 3.3 x 16.3 inches
41°F ~ 95°F
10% ~ 75%
10dB
55dB
0.5%
65dB
35dB
2%
Y:1.0Vp-p(75Ω load), Pr:0.70Vp-p(75Ω load)
Pb:0.70Vp-p(75Ω load)
1.0Vp-p(75Ω load)
Y:1.0Vp-p(75Ω load)
Pr:0.70Vp-p(75Ω load)
Pb:0.70Vp-p(75Ω load)
Luminance Signal: 1.0Vp-p(75Ω load)
Color Signal: 0.286Vp-p(75Ω load)
80W x 2(4Ω)
80W(4Ω)
80W x 2(4Ω)
100W(4Ω)
20Hz~20KHz
75dB
50dB
(AUX)500mV
5.1ch speaker system
Speaker system
Impedance
Frequency range
Output sound pressure level
Rated input
Maximum input
Dimensions (W x H x D)
Weight
Front/Center/Rear speaker
4Ω x 5
150Hz~20kHz
81dB/W/M
80W
160W
Front/Rear
Center
Front/Rear
Center
12.1 x 7.5 x 7.3 inches
11.8 x 7.5 x 4.6 inches
3.3 Ibs
2.6 Ib
Subwoofer speaker
4Ω
30Hz~150Hz
80dB/W/M
100W
200W
MISCELLANEOUS
S
P
E
A
K
E
R
S
6.3 x 17.1 x 16.0 inches
18.7 Ib
78
41P~80P(DS660)-SECA GB
11/10/04 1:30 PM
Page 80
Notes on Terminology
ANGLE
CHAPTER
NUMBER
Recorded onto some DVD discs are scenes which have been simultaneously shot from a number
of different angles (the same scene is shot from the front, from the left , from the right , etc.).
With such discs, the Angle button can be used to change the angle of view for specific scenes.
These numbers are recorded on DVD discs. A Title is subdivided into many
sections, each of which is numbered, and specific parts of the video can be
searched quickly using these numbers.
DVD
A high-density optical disc on which high-quality pictures and sound have been recorded by
means of digital signals. Incorporating a new video compression technology (MPEG-2) and highdensity recording technology, a DVD disc comprises two 0.6 mm thick discs bonded together.
PCM
An acronym for Pulse Code Modulation - another name for digital audio.
PBC
(PLAYBACK
CONTROL)
This is recorded on a video CD (version 2.0). Selected scenes or information can
be chosen from the menu displayed on the TV monitor.
REGION NUMBER
Both the DVD player and DVD discs are encoded with a region number.
If the region number on the DVD disc does not correspond to the region number
of the DVD player, the player cannot play the disc.
SUBTITLES
Translated appearing at the bottom of the screen. A DVD disc can contain up to
32 subtitle languages.
TITLE NUMBER
These numbers are recorded on DVD discs. When a disc contains two or more
movies, these movies are numbered as Title 1, Title 2, etc.
TRACK NUMBER
VIDEO CD
These numbers are assigned to the tracks which are recorded on video and
audio CDs. They enable specific tracks to be located quickly.
Contains recordings of pictures and sound whose quality is roughly comparable
to that of video tape.
This player also supports video CDs with playback control (version 2.0).
You can enjoy 5.1 (or 6) channels of high fidelity digital sound from various
digital input sources such as DVD, CD etc.
DTS provides a realistic, clear surround sound that has not previously been
available from conventional surround sound.
5.1 (or 6) Channel Digital Surround sound reproduced from DVDs and LDs
recorded as a digital signals (with
disc marking). With better sound quality,
dynamic range, and directionality than traditional Dolby surround technology, you
can enjoy dynamic, realistic sound.
A 4 channel analog sound reproduced from a program source such as a
videotape or LD with the
mark. You can enjoy a more realistic, robust
sound unavailable from regular stereo sources.
79
41P~80P(DS660)-SECA GB
11/10/04 1:30 PM
Page 81
Samsung Limited Warranty
Samsung Electronics Canada Inc. (SECA), warrants that this product is
free from defective material and workmanship.
SECA further warrants that if this product fails to operate properly within the
specified warranty period and the failure is due to improper workmanship or
defective material SECA will repair or replace the product at its option.
All warranty repairs must be performed by a SECA authorized service
centre. (The name and address of the location nearest you can be obtained by
calling toll free 1-800-726-7864 or visiting our web site at
www.samsung.ca)
Labour
one (1) year (carry-in)
Parts
one (1) year
On carry-in models, transportation to and from the service centre is the
customer’s responsibility.
The original dated sales receipt must be retained by the customer and is the
only acceptable proof of purchase. It must be presented to the authorized
service centre at the time service is requested.
Exclusions
MISCELLANEOUS
This warranty does not cover damage due to accident, fire flood and/or other
acts of God; misuse, incorrect line voltage, improper installation, improper or
unauthorized repairs, commercial use, or damage that occurs in shipping.
Exterior and interior finish, lamps and glass are not covered under this
warranty. Customer adjustments which are explained in the instruction
manual are not covered under the terms of this warranty.
This warranty will automatically be voided for any unit found with a
missing or altered serial number. This warranty is valid only on products
purchased and used in Canada.
80
1p~40p(DS660)-SECA GB
11/10/04 1:26 PM
Page 2
SAMSUNG ELECTRONICS CANADA, INC.
HEADQUARTERS
7037 Financial Drive, Mississauga, Ontario, Canada L5N 6R3
TEL: 1-905-542-3535
www.samsung.ca
SERVICE DIVISION
7037 Financial Drive, Mississauga, Ontario, Canada L5N 6R3
1-800-SAMSUNG (1-800-726-7864)
AV SYNC
LC
AH68-01493B