Bosch MON152CL30 Instruction manual

MON152CL30
Instruction Manual
EN 15-inch Color LCD
Flat Panel Display
Monitor
MON152CL30 | Instruction Manual | Important Safeguards
EN | 2
Important Safeguards
1. Read, Follow, and Retain Instructions - All safety
and operating instructions should be read and
followed before operating the unit. Retain instructions
for future reference.
2. Heed Warnings - Adhere to all warnings on the unit
and in the operating instructions.
3. Attachments - Attachments not recommended by
the product manufacturer should not be used, as they
may cause hazards.
4. Installation Cautions - Do not place this unit on an
unstable stand, tripod, bracket, or mount. The unit
may fall, causing serious injury to a person and
serious damage to the unit. Use only manufacturerrecommended accessories, or those sold with the
product. Mount the unit per the manufacturer's
instructions. Appliance and cart combination should
be moved with care. Quick stops, excessive force, or
uneven surfaces may cause the appliance and cart
combination to overturn.
5. Cleaning - Unplug the unit from the outlet before
cleaning. Follow any instructions provided with the
unit. Generally, using a damp cloth for cleaning is
sufficient. Do not use liquid cleaners or aerosol
cleaners.
6. Servicing - Do not attempt to service this unit
yourself. Opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
7. Damage Requiring Service - Unplug the unit from
the main AC power source and refer servicing to
qualified service personnel under the following
conditions:
• When the power supply cord or plug is damaged.
• If liquid has been spilled or an object has fallen
into the unit.
• If the unit has been exposed to water and/or
inclement weather (rain, snow, etc.).
• If the unit does not operate normally, when
following the operating instructions. Adjust only
those controls specified in the operating
instructions. Improper adjustment of other controls
may result in damage, and require extensive work
by a qualified technician to restore the unit to
normal operation.
• If the unit has been dropped or the cabinet
damaged.
• If the unit exhibits a distinct change in
performance, this indicates that service is needed.
8. Replacement Parts - When replacement parts are
required, the service technician should use
replacement parts specified by the manufacturer or
that have the same characteristics as the original part.
Unauthorized substitutions may result in fire,
electrical shock or other hazards.
9. Safety Check - Upon completion of servicing or
repairs to the unit, ask the service technician to
perform safety checks to ensure proper operating
condition.
Bosch Security Systems | April 12, 2006
10. Power Sources - Operate the unit only from the type
of power source indicated on the label. If unsure of
the type of power supply to use, contact your dealer
or local power company.
• For units intended to operate from battery power,
refer to the operating instructions.
• For units intended to operate with External Power
Supplies, use only the recommended approved
power supplies.
• For units intended to operate with a limited power
source, this power source must comply with
EN60950. Substitutions may damage the unit or
cause fire or shock.
• For units intended to operate at 24VAC, normal
input voltage is 24VAC. Voltage applied to the
unit's power input should not exceed 30VAC.
User-supplied wiring, from the 24VAC supply to
unit, must be in compliance with electrical codes
(Class 2 power levels). Do not ground the 24VAC
supply at the terminals or at the unit's power
supply terminals.
11. Coax Grounding - If an outside cable system is
connected to the unit, ensure that the cable system is
grounded. U.S.A. models only - Section 810 of the
National Electrical Code, ANSI/NFPA No.70,
provides information regarding proper grounding of
the mount and supporting structure, grounding of the
coax to a discharge unit, size of grounding
conductors, location of discharge unit, connection to
grounding electrodes, and requirements for the
grounding electrode.
12. Grounding - This unit may be equipped with a 3wire grounding plug (a plug with a third pin, for
grounding). This safety feature allows the plug to fit
into a grounding power outlet only. If unable to insert
the plug into the outlet, contact an electrician to
arrange replacement of the obsolete outlet. Do not
defeat the safety purpose of the grounding plug.
• Outdoor equipment should only be connected to
the unit's inputs after this unit has had its
grounding plug connected to a grounded outlet or
its ground terminal properly connected to a ground
source.
• The unit's input connectors must be disconnected
from outdoor equipment before disconnecting the
grounding plug or grounding terminal.
• Proper safety precautions such as grounding should
be followed for any outdoor device connected to
this unit.
13. Lightning - For added protection during a lightning
storm, or when this unit is left unattended and
unused for long periods of time, unplug the unit from
the wall outlet and disconnect the cable system. This
will prevent damage to the unit due to lightning and
power line surges.
EN | 3
MON152CL30 | Instruction Manual | Safety Precautions
For Indoor Product
1. Water and Moisture - Do not use this unit near
water - for example, in a wet basement, in an
unprotected outdoor installation or in any area
classified as a wet location.
2. Object and Liquid Entry - Never push objects of
any kind into this unit through openings, as they
might touch dangerous voltage points or create
short circuits, resulting in a fire or electrical
shock. Never spill liquid of any kind on the unit.
3. Power Cord and Power Cord Protection - For
units intended to operate with 230VAC, 50Hz,
the input and output power cord must comply
with the latest versions of IEC Publication 227 or
IEC Publication 245.
Power supply cords should be routed so they are
not likely to be walked on or pinched. Pay
particular attention to location of cords and plugs,
convenience receptacles, and the point of exit
from the appliance.
4. Overloading - Do not overload outlets and
extension cords; this can result in a risk of fire or
electrical shock.
For Outdoor Product
Power Lines - An outdoor system should not be
located in the vicinity of overhead power lines,
electric lights or power circuits, or where it may
contact such power lines or circuits. When
installing an outdoor system, extreme care should
be taken to keep from touching power lines or
circuits, as this contact might be fatal. U.S.A.
models only - refer to the National Electrical
Code Article 820 regarding installation of CATV
systems.
For Rack-mount Product
1. Ventilation - Do not place this equipment in a
built-in installation or rack, unless proper
ventilation is provided, or the manufacturer's
instructions were followed. The equipment must
not exceed its maximum operating temperature
requirements.
2. Mechanical Loading - When rack-mounting the
equipment, ensure that a hazardous condition is
not created by uneven mechanical loading.
Bosch Security Systems | April 12, 2006
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC SENSITIVE
DEVICES
WARNING:
Electrostatic-sensitive device. Use
proper CMOS/MOSFET handling
precautions to avoid electrostatic
discharge.
NOTE: Grounded wrist straps must be worn and proper ESD
safety precautions observed when handling the electrostaticsensitive printed circuit boards.
Safety Precautions
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
This symbol indicates the presence of
uninsulated “dangerous voltage” within the
product’s enclosure that can cause an electric
shock.
This symbol indicates the presence of
important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
Installation should be performed by qualified
service personnel only in accordance with the
National Electrical Code or applicable local
codes.
Power Disconnect. Units with or without
ON-OFF switches have power supplied to the
unit whenever the power cord is inserted into the
power source; however, the unit is operational
only when the ON-OFF switch is in the ON
position. The power cord is the main power
disconnect for all units.
EN | 4
MON152CL30 | Instruction Manual | FCC & ICES Information
FCC & ICES INFORMATION
Sicherheitshinweise
(U.S.A. and Canadian Models Only)
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1)
This device may not cause harmful interference, and
(2)
This device must accept any interference received,
including interference that may cause undesired
operation.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules and ICES-003 of Industry Canada. These limits
are designed to provide reasonable protection against harmful
interference when the equipment is operated in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy, and if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer, or an experienced radio/TV technician for
help.
Intentional or unintentional changes or modifications, not
expressly approved by the party responsible for compliance, shall
not be made. Any such changes or modifications could void the
user’s authority to operate the equipment.The user may find the
following booklet, prepared by the Federal Communications
Commission, helpful: How to Identify and Resolve Radio-TV
Interference Problems. This booklet is available from the U.S.
Government Printing Office, Washington, DC 20402,
Stock No. 004-000-00345-4.
VORSICHT: UM EINEN ELEKTRISCHEN SCHLAG ZU
VERMEIDEN, IST DIE ABDECKUNG (ODER RÜCKSEITE) NICHT
ZU ENTFERNEN. ES BEFINDEN SICH KEINE TEILE IN DIESEM
BEREICH, DIE VOM BENUTZER GEWARTET WERDEN
KÖNNEN. LASSEN SIE WARTUNGSARBEITEN NUR VON
QUALIFIZIERTEM WARTUNGSPERSONAL AUSFÜHREN.
Das Symbol macht auf nicht isolierte „gefährliche Spannung"
im Gehäuse aufmerksam. Dies kann zu einem elektrischen
Schlag führen.
Der Benutzer sollte sich ausführlich über Anweisungen für
die Bedienung und Instandhaltung (Wartung) in den
begleitenden Unterlagen informieren.
Achtung! Die Installation sollte nur von qualifiziertem
Kundendienstpersonal gemäß jeweils zutreffender
Elektrovorschriften ausgeführt werden.
Unterbrechung des Netzanschlusses. Geräte mit oder ohne
Netzschalter haben Spannung am Gerät anliegen, sobald der
Netzstecker in die Steckdose gesteckt wird. Das Gerät ist jedoch
nur betriebsbereit, wenn der Netzschalter (EIN/AUS) auf EIN
steht. Wenn das Netzkabel aus der Steckdose gezogen wird, ist
die Spannungszuführung zum Gerät vollkommen unterbrochen.
Precauciones de Seguridad
Sécurité
ATTENTION : POUR ÉVITER TOUT RISQUE D'ÉLECTROCUTION,
N'ESSAYEZ PAS DE RETIRER LE CAPOT (OU LE PANNEAU
PRECAUCIÓN: PARA DISMINUIR EL RIESGO DE DESCARGA
ELÉCTRICA, NO RETIRE LA CUBIERTA (NI LA PARTE
POSTERIOR). NO EXISTEN PIEZAS DE RECAMBIO EN EL
INTERIOR DEL EQUIPO. EL PERSONAL DE SERVICIO
CUALIFICADO SE ENCARGA DE REALIZAR LAS
REPARACIONES.
ARRIÈRE). CET APPAREIL NE CONTIENT AUCUN COMPOSANT
SUSCEPTIBLE D'ÊTRE RÉPARÉ PAR L'UTILISATEUR. CONFIEZ
LA RÉPARATION DE L'APPAREIL À DU PERSONNEL QUALIFIÉ.
Ce symbole signale que le produit renferme une « tension
potentiellement dangereuse » non isolée susceptible de
provoquer une électrocution.
Ce symbole invite l'utilisateur à consulter les instructions
d'utilisation et d'entretien (dépannage) reprises dans la
documentation qui accompagne l'appareil.
Attention : l'installation doit exclusivement être réalisée par du
personnel qualifié, conformément au code national d'électricité
américain (NEC) ou au code d'électricité local en vigueur.
Coupure de l'alimentation. Qu'ils soient pourvus ou non d'un
commutateur ON/OFF, tous les appareils reçoivent de l'énergie une
fois le cordon branché sur la source d'alimentation. Toutefois,
l'appareil ne fonctionne réellement que lorsque
le commutateur est réglé sur ON. Le débranchement du cordon
d'alimentation permet de couper l'alimentation des appareils.
Bosch Security Systems | April 12, 2006
Este símbolo indica que existen puntos de tensión peligrosos
sin aislamiento dentro de la cubierta de la unidad. Estos
puntos pueden constituir un riesgo de descarga eléctrica.
El usuario debe consultar las instrucciones de funcionamiento y
mantenimiento (reparación) en la documentación que se
suministra con el aparato.
Atención: la instalación la debe realizar únicamente personal
cualificado de conformidad con el National Electric Code o las
normas aplicables en su país.
Desconexión de la alimentación. Las unidades con o sin
interruptores de encendido/apagado reciben alimentación
eléctrica siempre que el cable de alimentación esté conectado a
la fuente de alimentación. Sin embargo, la unidad sólo funciona
cuando el interruptor está en la posición de encendido. El cable
de alimentación es la principal fuente de desconexión de todas
las unidades.
EN | 5
MON152CL30 | Instruction Manual | Safety Precautions
Veiligheidsmaatregelen
VOORZICHTIG: OPEN DE BEHUIZING OF DE ACHTERKANT
VAN HET APPARAAT NIET. ZO VERMINDERT U HET RISICO
OP ELEKTRISCHE SCHOKKEN. IN HET APPARAAT
BEVINDEN ZICH GEEN ONDERDELEN DIE U ZELF KUNT
REPAREREN. LAAT SERVICE EN ONDERHOUD UITVOEREN
DOOR GEKWALIFICEERD PERSONEEL.
Medidas de Segurança
CUIDADO: PARA REDUZIR O RISCO DE CHOQUE
ELÉCTRICO, NÃO RETIRE A TAMPA (OU A PARTE
POSTERIOR). NO INTERIOR, NÃO EXISTEM PEÇAS QUE
POSSAM SER REPARADAS PELO UTILIZADOR. REMETA A
ASSISTÊNCIA PARA OS TÉCNICOS QUALIFICADOS.
Dit symbool geeft aan dat er binnen in het apparaat
ongeïsoleerde, gevaarlijke spanning aanwezig is die mogelijk
elektrische schokken kan veroorzaken.
Este símbolo indica a presença de "tensão perigosa" não isolada
dentro da estrutura do produto, o que pode constituir risco de
choque eléctrico.
De gebruiker dient de bedienings- en onderhoudsvoorschriften
te raadplegen in de documentatie die werd meegeleverd met
het apparaat.
O utilizador deve consultar as instruções de funcionamento
e manutenção (assistência) nos documentos que
acompanham o aparelho.
Attentie: het apparaat mag alleen door gekwalificeerd personeel
worden geïnstalleerd. De installatie dient in overeenstemming
met de nationale elektrische richtlijnen of de van toepassing
zijnde lokale richtlijnen te worden uitgevoerd.
Spanning uitschakelen. Apparatuur met of zonder
aan-uitschakelaar staat onder spanning zolang de stekker is
aangesloten op de wandcontactdoos. De apparatuur is uitsluitend
in werking als de aan-uitschakelaar aan staat. Het netsnoer is de
"hoofdschakelaar" voor alle apparatuur.
Sicurezza
ATTENZIONE: PER RIDURRE IL RISCHIO DI SCOSSE
ELETTRICHE NON RIMUOVERE LA COPERTURA (O IL
PANNELLO POSTERIORE). L'UNITÀ NON CONTIENE
COMPONENTI INTERNI RIPARABILI DALL'UTENTE. PER
QUALSIASI INTERVENTO, RIVOLGERSI A PERSONALE
TECNICO QUALIFICATO.
Questo simbolo indica la presenza di "tensione pericolosa" non
isolata all'interno del contenitore del prodotto. Ciò comporta un
potenziale rischio di scosse elettriche.
Si consiglia di consultare le istruzioni operative e di
manutenzione (interventi tecnici) contenute nella
documentazione fornita con il dispositivo.
Attenzione: l'installazione deve essere effettuata esclusivamente
da personale tecnico qualificato in conformità con il National
Electrical Code o con le normative locali vigenti.
Scollegamento dell'alimentazione. Le unità dotate o sprovviste di
interruttori ON-OFF vengono alimentate quando si inserisce il
cavo nella presa dell'alimentazione. L'unità è tuttavia in funzione
solo quando l'interruttore ON-OFF si trova nella posizione ON. Il
cavo di alimentazione costituisce il dispositivo di scollegamento
dell'alimentazione principale per tutte le unità.
Bosch Security Systems | April 12, 2006
Atenção: a instalação deve ser executada apenas por técnicos
qualificados da assistência, de acordo com o código eléctrico
nacional ou os códigos locais aplicáveis.
Corte de corrente. As unidades com ou sem interruptores
ON-OFF (ligar/desligar) recebem corrente sempre que o fio de
alimentação está introduzido na fonte de alimentação; contudo, a
unidade apenas está operacional quando o interruptor ON-OFF
está na posição ON. O fio de alimentação destina-se a desligar a
corrente em todas as unidades.
MON152CL30 | Instruction Manual | Contents
EN | 6
Table of Contents
Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
FCC Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
1.0
UNPACKING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
1.1
Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
2.0
SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
3.0
MON152CL30 EXPLODED VIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
4.0
GENERAL FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
4.1
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
5.0
DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
5.1
Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
6.0
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
6.1
Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
6.2
Desktop Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
6.3
Wall Mount/Rack Mount Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
6.4
Connecting the Composite Video Signal to the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
6.5
Connecting the Y/C (S-video) Signal to the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
6.6
Connecting Audio to the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
6.7
Connecting the DVI Signal to the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
6.8
Ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
7.0
OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
7.1
Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
7.2
Front Panel Lock-out Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
7.3
On-screen Display (OSD) Menu (Multilanguage) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
8.0
SPECIAL FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
8.1
Channel Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
8.2
Underscan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
8.3
Picture-in-Picture (PIP) and Picture-and-Picture (PAP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
9.0
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
10.0 APPENDIX: On-screen Display Menu Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
10.1 Video Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
10.2 VGA/DVI Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Bosch Security Systems | April 12, 2006
EN | 7
MON152CL30 | Instruction Manual | Unpacking
1.0
UNPACKING
This equipment should be unpacked and handled with
care. If an item appears to have been damaged in
shipment, notify the shipper.
Verify that all parts shown in the Parts List have been
included. If any items are missing, notify your Bosch
Security Systems Sales or Customer Service
Representative.
Inp ut
Menu
The original packing carton is the safest container in
which to transport the unit. Save it for possible future use.
1 2
1.1
Parts List
3 4 5 6
7 8
Figure 1: Front Panel
Qty
Item
# Button
Description
1
MON152CL30 Color LCD flat panel monitor
1 Input
Selects the signal to be displayed
2
Power Cords: 3-wire with grounded plug, 1.8 m (6 ft) long;
One (1) with European Continental plug type and one (1)
with U.S. plug type
2 Menu
Selects the on screen display (OSD)
3
Selects brightness
Scrolls up in the OSD
1
Analog VGA cable, 1.5 m (5 ft) (DVI-I to D-SUB)
1
Power supply extension cable, 1.5 m (5 ft)
4
Selects contrast
Scrolls down in the OSD
1
This installation manual
5
Decreases the value
Scrolls left in the OSD
2.0 SERVICE
6
Increases the value
Scrolls right in the OSD
If the unit requires servicing, contact the nearest Bosch
Security Systems Service Center for authorization to
return the unit and for shipping instructions.
7 LED Indicator Power on (green), standby (amber), sleep mode
(flashing amber)
8 Green Power Display power (On/Off)
Button
Service Centers
USA
Phone:
800-366-2283 / 585-340-4162
fax:
800-366-1329
e-mail:
cctv.repair@us.bosch.com
CCTV Spare Parts
Phone:
800-894-5215 / 408-957-3065
fax:
408-935-5938
e-mail:
BoschCCTVparts@ca.slr.com
Canada
Phone:
514-738-2434
fax:
514-738-8480
Europe, Middle East & Asia Pacific Region
Phone:
44 (0) 1495 274558
fax:
44 (0) 1495 274280
email:
rmahelpdesk@solectron.com
For additional information, see
www.boschsecurity.com.
3.0 MON152CL30 EXPLODED VIEW
The front panel of the MON152CL30 contains various
push button features (see Figure 1, Items 1-8) that
allow you to adjust your screen to different levels.
Bosch Security Systems | April 12, 2006
The back panel contains various connector openings.
AUDIO
VIDEO
VIDEO
IN
IN
IN
IN
OUT
OUT
O UT
O UT
R
L
PC IN
1
Y/C
2
3
Figure 2: Back Panel (see Figure 3 for exploded view)
#
Item
1
DVI-I connector
2
Y/C connector (S-video)
3
Power input connector from base or optional power supply
EN | 8
MON152CL30 | Instruction Manual | Description
Audio input (L)
Audio input (R)
Video 2 input
Video 1 input
VGA / DVI-I input
Y/C input (S-video)
Audio output (R)
Audio output (L)
Video 1 output
Video 2 output
Figure 3: Connectors - Exploded View
The base unit contains the main connectors that supply
power to the monitor.
1
100 – 240v AC, 50/60 Hz, 55VA
Rated input power 42 W
I
O
Power
5.0
DESCRIPTION
5.1
Monitor
The MON152CL30 15-inch (38-cm) Color Panel
Display Monitor displays PAL or NTSC standard color
pictures in CCTV systems. The MON152CL30
monitor includes two (2) looping Composite Video
BNC connector inputs, two (2) looping Audio RCA
inputs, and one (1) Y/C (S-video) input using a 4-pin
mini-DIN. In addition, this model works with both
DVI-I and VGA signals.
To enhance the multi-input capability, "Picture-inPicture" allows any of the composite video or S-video
inputs to be inserted into each other, or into the
VGA/DVI-I display.
Monitor control functions are accessed via the front
panel push buttons and the multi-language On-screen
Display (OSD). See Figure 1 for front panel
descriptions.
6.0
2
INSTALLATION
3
Figure 4: Base
6.1
#
Model
Rated
Voltage
Power
Sync
No.
Voltage
Range
at Rated
Format
MON152CL30
120/230 VAC
90-264 V
42 W
Item
1
Power supply connector to display
2
Power supply ON/OFF
3
Power cord connection
4.0 GENERAL FEATURES
Power
Voltage
NTSC/PAL
50/60 Hz
6.2
Desktop Installation
This high-performance, 15-inch Color Panel Display
Monitor with 1024 x 768 pixels resolution has been
designed to display Digital DVI, Analog VGA, and
Composite Video signals.
The MON152CL30 monitor is delivered with a
3-pole, US-style power cord and a 3-pole, Euro-style
power cord. Use the US-style power cord where
120 VAC, 60 Hz power is available; use the Euro-style
power cord where 230 VAC, 50 Hz power is available.
4.1
The monitor automatically adjusts to either power
input voltage. A Power (ON/OFF) switch is located on
the base of the unit (Figure 4, Item 2).
•
•
•
•
•
•
•
•
•
•
•
Features
90 to 264 VAC Power Supply
NTSC/PAL Auto-Detect
(1024 x 768; 500 TVL) High Resolution
VGA/DVI-I Input
Composite Video Input
Audio Input / Output
Y/C Input (S-video)
On-screen Display (OSD) with Multiple
Languages
De-Interlace Function
Auto-Detect 3-D Comb Filter NTSC/PAL
PIP, PAP, Channel Title
Bosch Security Systems | April 12, 2006
EN | 9
MON152CL30 | Instruction Manual | Installation
6.3
Wall Mount/Rack Mount
Installation
The square mounting holes (75 mm (2.9 in.) centers)
can be used for rack mount installation or with wall
mount brackets (not provided) (refer to the Rack
Mount Kit Instructions).
2. Mount the unit to the mounting bracket (not
provided) using the four (4) mounting holes on
the rear panel. The square mounting hole
patterns are standard on 75 mm (2.9 in.) centers,
as shown in Photo C.
6.3.1 Wall Mount Installation
1. Remove the MON152CL30 power supply/base
from the LCD panel section.
a. Unscrew the two (2) holding screws before
separating the base from the panel, as shown
in Photo A.
Photo A
Photo C
6.3.2 Extension Cable Installation
Use the Extension Cable (included with the
MON152CL30) to place the power supply/base unit to
1.5 m (5 ft) from the LCD panel for wall mount or
rack mount installations.
b. Carefully remove the power bayonet
connector (Figure 4, Item 1) from the panel
(see Photo B), while sliding the base off the
monitor.
Photo B
1. Follow the instructions in Section 6.3.1, Step 1
to remove the power supply/base from the LCD
panel section.
2. Attach the power supply extension cable.
a. Connect one end of the extension cable
(large connector) to the power supply/base,
as shown in Photo D.
Photo D
Bosch Security Systems | April 12, 2006
EN | 10
MON152CL30 | Instruction Manual | Installation
b. Connect the other end of the extension cable
(small connector) to the power input
connector on the rear side of the LCD panel,
as shown below in Photo E.
2. Connect the bayonet connector from the power
supply to the power input connector on the rear
side of the LCD panel, as shown below in
Photo F.
Photo E
3. Connect the appropriate ends of the IEC power
cord to the power source (mains) and power
supply/base unit. Toggle the power switch on
the base to the ON position.
6.3.3 MON151PS Power Supply Installation
Use the MON151PS Power Supply (purchased
separately) to power the MON152CL30 unit's LCD
panel separately from the power supply/base unit. The
power source (mains) (120/230 VAC) can be located at
a distance of up to 3 m (10 ft) away. Use for a wall
mount or rack mount installation.
1. Follow the instructions in Section 6.3.1, Step 1
to remove the power supply/base from the LCD
panel section.
NOTE: The power supply/base unit may now be
stored, as it is no longer required to power the unit.
Photo F
3. Connect the IEC power cord to the
MON151PS power supply unit.
4. Mount the LCD panel in its intended location.
5. Connect the power end of the IEC power cord
to the power supply source.
6.4
Connecting the Composite Video
Signal to the Monitor
There are two (2) BNC connectors located on the rear
of the monitor for composite video input and two (2)
BNC connectors for composite video outputs
(Figure 6).
NOTE: All video inputs are active loop-through. The
impedance is automatically set to 75 ohm by the input
of the signal on the input connector, while operating in
a single connection mode (Figure 8). If a cable is also
connected to the output connector, the video signal
can be passed on to another monitor connected to it
via the active loop-through function. Up to three (3)
monitors may be connected in this manner (Figure 9).
NOTE: To select between VIDEO1 and VIDEO2,
press Input (Figure 1, Item 1) located on the front of
the monitor.
Bosch Security Systems | April 12, 2006
EN | 11
MON152CL30 | Instruction Manual | Installation
6.5
Connecting the Y/C (S-video)
Signal to the Monitor
There is one (1) mini-DIN type connector for the Svideo (Y/C) input (as shown in Figure 5 and Figure 6).
NOTE: Both Y and C inputs are terminated with
75 ohm.
3
4
1.
2.
3.
4.
GND
GND
Y-signal IN or OUT
C-signal IN or OUT
1
2
Connecting the VGA / DVI-I Signal
to the Monitor
6.7.1 VGA Signal
Connect the analog VGA signal using the provided
VGA cable (DVI-I to D-SUB).
6.7.2 DVI-I Signal
Connect the digital DVI-I signal using a standard
DVI-I cable (not provided).
Figure 7: VGA / DVI-I Input
Figure 5: Y/C Connection Pin-out
6.6
6.7
6.8
Connecting Audio to the Monitor
There are two (2) sets of audio connectors (Figure 6);
one set is audio input (R) and input (L); the second set
is audio output (R) and audio output (L).
Audio input (L)
Audio input (R)
Video 2 input
Audio output (R)
Audio output (L)
Video 1 output
Video 1 input
VGA / DVI-I input
Y/C input (S-video)
Video 2 output
Figure 6: Connectors - Exploded View
Bosch Security Systems | April 12, 2006
Ventilation
To prevent overheating, ensure that the ventilation
openings on the rear of the monitor are not covered.
EN | 12
MON152CL30 | Instruction Manual | Installation
Video Camera
VIDEO
AUDIO
IN
DC12V
IN
Y/C
PC IN
R
L
OUT
VCR
VIDEO
AUDIO
R
L
IN
OUT
Call Out.eps
Figure 8: Single Monitor Configuration
Video Camera
VIDEO
AUDIO
IN
PC IN
L
VIDEO
AUDIO
DC12V
IN
R
IN
VIDEO
AUDIO
DC12V
IN
Y/C
PC IN
IN
Y/C
R
From Video Output
Figure 9: Multiple Monitor Configuration
Bosch Security Systems | April 12, 2006
L
OUT
DC12V
IN
PC IN
OUT
R
L
OUT
Y/C
EN | 13
MON152CL30 | Instruction Manual | Operation
7.0
7.1
OPERATION
Front Panel Controls
7.2
7.3
Inp ut
Inp ut
Menu
Menu
Figure 10: Display Panel Exploded View
Input
Menu
Press this button to select the signal to be
displayed. Selects VIDEO1, VIDEO2,
S-video, PC, and DVI.
Press this button to select the on-screen
display (OSD) or to save your settings.
Press this button to scroll up in the OSD.
Press this button to scroll down in the OSD.
Press this button to decrease the value or to
scroll left in the OSD.
Press this button to increase the value or to
scroll right in the OSD.
Brightness
1. Press the
button to select the brightness.
2. Press the
the value.
or
button to increase or decrease
3. Press Menu to save changes.
Contrast
1. Press the
2. Press the
the value.
button to select the contrast.
or
button to increase or decrease
3. Press Menu to save changes.
LED Indicator
Indicates power is on (green), standby
(amber), sleep mode (flashing amber).
Green Power Button
Press this button to power (ON/OFF).
Bosch Security Systems | April 12, 2006
Front Panel Lock-out Feature
To lock the front panel, press and hold the
buttons simultaneously until a message
flashes “KEY LOCKED”, then release. To unlock the
front panel, press and hold the
buttons
simultaneously until a message flashes “KEY
UNLOCKED”, then release.
On-screen Display (OSD) Menu
(Multilanguage)
7.3.1
Navigating the Menu
1. Press the Input button to select an active input.
NOTE: If an active input is not selected, the OSD
main menu can not be accessed.
2. Press Menu to select the OSD Main menu.
3. Press the
or
button to select a menu option,
then press Menu to select the sub menu.
4. Press the
the value.
or
button to increase or decrease
5. Press the Menu button to save your changes.
6. To exit, press the
press Menu.
or
button to select Exit, then
NOTE: OSD will automatically disappears after
15 seconds of in-activity.
EN | 14
MON152CL30 | Instruction Manual | Operation
7.3.2 Video Mode
7.3.3 VGA / DVI Mode
Press the Menu button for the following menu options:
Press the Menu button for the following menu options:
RGB
Main Menu
Tint
TINT
COLOR
DEFAULT
LANGUAGE
CHANNEL TITLE
UNDER SCAN
DISABLE
PIP MENU
POWER ON OPTIONS
VOLUME
EXIT
Function
AUTO
RGB
i
RGB
RGB
Adjusts tint level; for best results, adjust until skin
color is natural.
NOTE: Applicable to NTSC only; not available in
PAL format.
Auto Set
AUTO
RGB
Selects the color temperature of the LCD
monitor.
Selects the language for the OSD text, available in
English, French, German, Italian, Spanish, Dutch,
and Portuguese.
Language
Selects the language for the OSD text,
available in English, French, German,
Italian, Spanish, Dutch, and Portuguese.
Enables / Disables and allows editing of the
16-character title per video input channel.
Volume
Adjusts the volume for the audio.
Default
Resets to the factory default settings for
brightness, contrast, tint, color, and volume.
Resets to the factory default settings for
brightness, contrast, tint, color, and volume.
RGB
AUTO
RGB
Under Scan Enables / Disables the Under Scan function.
Power/On
Option
Automatic adjustment of H position,
V position, phase and clock values.
Color Temperature
i
Default
PIP Menu
Function
Manual adjustment of the H position,
V position, and fine tune.
Adjusts the overall color intensity of the screen.
Channel
Title
Main Menu
Display Setting
Color
Language
AUTO SET
DISPLAY SETTING
COLOR TEMPERATURE
LANGUAGE
VOLUME
DEFAULT
PIP MENU
POWER ON OPTIONS
INFORMATION
EXIT
Selects the picture-in-picture sub menu.
PIP Menu
Selects the video input to be displayed upon
power-up after a power interruption. The factory
default setting is VIDEO1.
Power on Option
RGB
Volume
Adjusts the volume for the audio.
Exit
Exits the OSD Menu and returns to standard
monitor display.
i
AUTO
RGB
Displays H frequency, V frequency, and
resolution information.
Exit
Exits the OSD menu and returns to
standard monitor display.
i
AUTO
RGB
i
AUTO
RGB
i
Bosch Security Systems | April 12, 2006
Selects the video input to be displayed
upon power-up after a power interruption.
The factory default setting is VIDEO1.
Information
RGB
RGB
Selects the picture-in-picture sub menu.
NOTE: The OSD main menu is removed
from the display after 15 seconds if no
selections or adjustments are made.
RGB
EN | 15
MON152CL30 | Instruction Manual | Special Features
8.0
SPECIAL FEATURES
8.1
Channel Title
The Channel Title menu displays the name of the
active input at the bottom of the screen.
NOTE: This feature does not allow PIP or PAP to be
displayed when the Channel Title is ON.
•
The PAP feature splits the screen vertically;
displaying the PAP image on the left side and
the composite/S-video signal on the right side.
•
The PAP function will not work with a
VGA/DVI signal.
•
The signal processing of the PIP/PAP
compared to the main window causes a
difference in sharpness and color.
•
PIP, PAP, and Channel Title can not be
combined. Only one can be enabled at a time.
CHANNEL TITLE
TITLE EDITING
CHANNEL TITLE DISABLE
EXIT
Main Menu
Function
Title Editing
Edits the 16-character title for
VIDEO1, VIDEO2, and S-video
Channel Title
Enables/disables channel title
8.2
Underscan
When Underscan is enabled, it reduces the image by
approximately 5%.
8.3
Picture-in-Picture (PIP) and
Picture-and-Picture (PAP)
To enhance the multi-input capability, "Picture-inPicture" allows any of the composite video or S-video
inputs to be inserted into each other, or into the
VGA/DVI display.
PIP MENU
PIP INPUT
PIP LOCATION
PIP SIZE
PIP
DISABLE
PAP
DISABLE
HV KEYSTONE
EXIT
Main Menu
Function
PIP Input
Selects composite or S-video signal for use in the PIP
or the PAP window
NOTES:
• VGA/DVI-I can not be selected for PIP/PAP window
display
• The PIP window will be displayed on all channels
PIP Location Positions PIP window in any corner of the display or in
a custom location
PIP Size
Sets PIP window size to one of the following:
• Small (3.6 in. diagonal)
• Medium (4.9 in. diagonal)
• Large (7.4 in. diagonal)
PIP
Enables/disables PIP window
PAP
Enables/disables PAP window
HV Keystone Tilts entire picture in horizontal and/or vertical direction;
used to adjust the picture in monitor wall applications
Bosch Security Systems | April 12, 2006
EN | 16
MON152CL30 | Instruction Manual | Specifications
9.0
SPECIFICATIONS
Electrical
Rated Voltage
120/230 VAC, 50/60 Hz
Voltage Range
90 to 264
Power at Rated
42 W
On-screen Display
Video
Channel Title, Underscan, PIP Menu, Poweron Options, Volume, Exit
VGA/DVI
PAL/NTSC
LCD Panel
TFT LCD
Screen Size (H x V) 304.1 x 228.1 mm (12 x 9 in.)
Viewable Picture
38 cm (15 in.) measured diagonally
Area
Pixel Pitch (H x V)
0.297 x 0.297 mm
(0.01 x 0.01 in.)
Resolution
1024 x 768 pixels; 500 TVL typical
Aspect Ratio
4:3
Display Colors
8 bits interface; 16.2 million colors
Response Time
16 ms
Backlight
Four (4) cold cathode fluorescent tubes, rated
life 50,000 hours, at 50% brightness
on Options, Information, Exit
Indicators
LED
Viewing Angle
140° horizontal, 125° vertical @ CR ≥ 10
Video Input
Composite
1.0 Vp-p (0.5-1.5 Vp-p), automatic switching
Video (CVBS)
from 75 Ohm unbalanced termination to Hi-Z
with loop-through operation
Y/C (S-video)
0.7 Vp-p (Y-signal), 0.3 Vp-p (C-signal),
75 Ohm termination
Picture-in-Picture
Video 1, Video 2, S-Video
VGA Input
Analog RGB
0.7 Vp-p (0.5-1 Vrms)
Picture-in-Picture
Video 1, Video 2, S-Video
VGA Timing Modes 640 x 480, 60/72/75 Hz
800 x 600, 56/60/72/75 Hz
1024 x 768, 60/70/75/85 Hz
Audio Input
1.0 V line level
Audio Output
Loop-through line level
Speakers: two (2), 1 W
Controls
Front Panel
Push-buttons
Input
Selects Video 1, Video 2, S-Video, VGA, or
DVI input
Menu
Selects On-screen Display (OSD)
Up cursor, brightness select
Down cursor, contrast select
Adjustment decrease
Adjustment increase
Power
On / Off
Front Panel Lockout Multiple push-button combination
"No Signal" (flashing)
Connectors
Video 1
Composite video: two (2) BNC (1 in, 1 out)
Video 2
Composite video: two (2) BNC (1 in, 1 out)
Y/C (S-video)
One (1) mini-DIN, 4-pin (in only)
DVI
One (1) VGA to DVI-I cable included
audio: two (2) RCA (1 in, 1 out)
audio: two (2) RCA (1 in, 1 out)
Power Cord
Two (2), 3-wire with grounded plug,
1.8 m (6 ft) long. One (1) with a
European/Continental plug type and one (1)
400 cd/m2
Contrast Ratio (CR) 500:1
Power On (green), Standby (amber), Sleep
Mode (flashing amber)
On-Screen
Optical Characteristics
Luminance
Auto Set, Display Setting, Color Temperature,
Language, Volume, Default, PIP Menu, Power-
Voltage
Sync Format
Tint (NTSC only), Color, Default, Language,
with a U.S. plug type
Mechanical
Cabinet
Material: ABS94V0 plastic
Finish: Charcoal
Wall mounting compatible with standard
bracket, 75 mm centers, M4 thread
Dimensions
LCD Panel with
391 x 183 x 395 mm
Base (W x D x H)
(15.4 x 7.2 x 15.6 in.)
LCD Panel Only
391 x 70 x 306 mm
(W x D x H)
(15.4 x 2.75 x 12 in.)
Weight
LCD panel with base: 4.9 kg (10.8 lb)
LCD panel only: 3.6 kg (8.0 lb)
Environmental
Operating Temp.
0°C to 45°C (32°F to 122°F)
Storage Temp.
-20°C to 60°C (-4°F to 140°F)
Humidity
10%-95%, non-condensing
Product Regulatory Compliance
Electromagnetic Compatibility (EMC)
Complies with FCC Part 15, ICES-003, and
CE regulations
Product Safety
Complies with CE regulations, CUL US, EN,
and IEC Standards
Accessories
MON151PS
Power Supply
120/220 VAC, 50/60 Hz input, 12 VDC, 4.0 A
output. Used for operation away from the base.
MON151RK Rack Mount Kit
For mounting one MON152CL monitor in an
EIA standard 48.26 cm (19 in.) rack 1unit
wide by 7 rack units high
Bosch Security Systems | April 12, 2006
EN | 17
MON152CL30 | Instruction Manual | Appendix
10.0 APPENDIX: On-screen Display Menu Configurations
10.1
RGB
RGB
RGB
RGB
RGB
RGB
Video Mode (NTSC Only)
TINT
TINT
COLOR
DEFAULT
LANGUAGE
CHANNEL TITLE
UNDER SCAN
DISABLE
PIP MENU
POWER ON OPTIONS
VOLUME
EXIT
TINT
COLOR
DEFAULT
LANGUAGE
CHANNEL TITLE
UNDER SCAN
DISABLE
PIP MENU
POWER ON OPTIONS
VOLUME
EXIT
0
RGB
50
100
COLOR
0
50
100
TINT
COLOR
DEFAULT
LANGUAGE
CHANNEL TITLE
UNDER SCAN
DISABLE
PIP MENU
POWER ON OPTIONS
VOLUME
EXIT
TINT
COLOR
DEFAULT
LANGUAGE
CHANNEL TITLE
UNDER SCAN
DISABLE
PIP MENU
POWER ON OPTIONS
VOLUME
EXIT
TINT
COLOR
DEFAULT
LANGUAGE
CHANNEL TITLE
UNDER SCAN
DISABLE
PIP MENU
POWER ON OPTIONS
VOLUME
EXIT
TINT
COLOR
DEFAULT
LANGUAGE
CHANNEL TITLE
UNDER SCAN
DISABLE
PIP MENU
POWER ON OPTIONS
VOLUME
EXIT
Bosch Security Systems | April 12, 2006
LANGUAGE
ENGLISH
FRANCAIS
DEUTSCH
ESPANOL
ITALIANO
NEDERLANDS
PORTUGUES
EXIT
CHANNEL TITLE
TITLE EDITING
CHANNEL TITLE DISABLE
EXIT
CHANNEL TITLE
TITLE EDITING
CHANNEL TITLE DISABLE
EXIT
TITLE EDITING
VIDEO 1 : VIDEO 1
VIDEO 2 : VIDEO 2
S-VIDEO : S-VIDEO
EXIT
EN | 18
MON152CL30 | Instruction Manual | Appendix
RGB
RGB
RGB
RGB
RGB
RGB
TINT
COLOR
DEFAULT
LANGUAGE
CHANNEL TITLE
UNDER SCAN
DISABLE
PIP MENU
POWER ON OPTIONS
VOLUME
EXIT
TINT
COLOR
DEFAULT
LANGUAGE
CHANNEL TITLE
UNDER SCAN
DISABLE
PIP MENU
POWER ON OPTIONS
VOLUME
EXIT
PIP MENU
PIP INPUT
PIP LOCATION
PIP SIZE
PIP
DISABLE
PAP
DISABLE
HV KEYSTONE
EXIT
PIP INPUT
VIDEO 1
VIDEO 2
S-VIDEO
EXIT
TINT
COLOR
DEFAULT
LANGUAGE
CHANNEL TITLE
UNDER SCAN
DISABLE
PIP MENU
POWER ON OPTIONS
VOLUME
EXIT
PIP MENU
PIP INPUT
PIP LOCATION
PIP SIZE
PIP
DISABLE
PAP
DISABLE
HV KEYSTONE
EXIT
PIP LOCATION
TOP LEFT
TOP RIGHT
BOTTOM RIGHT
BOTTOM LEFT
PIP H. POSITION
PIP V. POSITION
EXIT
TINT
COLOR
DEFAULT
LANGUAGE
CHANNEL TITLE
UNDER SCAN
DISABLE
PIP MENU
POWER ON OPTIONS
VOLUME
EXIT
PIP MENU
PIP INPUT
PIP LOCATION
PIP SIZE
PIP
DISABLE
PAP
DISABLE
HV KEYSTONE
EXIT
PIP LOCATION
TOP LEFT
TOP RIGHT
BOTTOM RIGHT
BOTTOM LEFT
PIP H. POSITION
PIP V. POSITION
EXIT
PIP H. POSITION
TINT
COLOR
DEFAULT
LANGUAGE
CHANNEL TITLE
UNDER SCAN
DISABLE
PIP MENU
POWER ON OPTIONS
VOLUME
EXIT
PIP MENU
PIP INPUT
PIP LOCATION
PIP SIZE
PIP
DISABLE
PAP
DISABLE
HV KEYSTONE
EXIT
PIP LOCATION
TOP LEFT
TOP RIGHT
BOTTOM RIGHT
BOTTOM LEFT
PIP H. POSITION
PIP V. POSITION
EXIT
PIP V. POSITION
TINT
COLOR
DEFAULT
LANGUAGE
CHANNEL TITLE
UNDER SCAN
DISABLE
PIP MENU
POWER ON OPTIONS
VOLUME
EXIT
PIP MENU
PIP INPUT
PIP LOCATION
PIP SIZE
PIP
DISABLE
PAP
DISABLE
HV KEYSTONE
EXIT
PIP SIZE
SMALL
MEDIUM
LARGE
EXIT
Bosch Security Systems | April 12, 2006
0
0
EN | 19
MON152CL30 | Instruction Manual | Appendix
RGB
RGB
RGB
RGB
RGB
RGB
TINT
COLOR
DEFAULT
LANGUAGE
CHANNEL TITLE
UNDER SCAN
DISABLE
PIP MENU
POWER ON OPTIONS
VOLUME
EXIT
PIP MENU
PIP INPUT
PIP LOCATION
PIP SIZE
PIP
DISABLE
PAP
DISABLE
HV KEYSTONE
EXIT
TINT
COLOR
DEFAULT
LANGUAGE
CHANNEL TITLE
UNDER SCAN
DISABLE
PIP MENU
POWER ON OPTIONS
VOLUME
EXIT
PIP MENU
PIP INPUT
PIP LOCATION
PIP SIZE
PIP
DISABLE
PAP
DISABLE
HV KEYSTONE
EXIT
TINT
COLOR
DEFAULT
LANGUAGE
CHANNEL TITLE
UNDER SCAN
DISABLE
PIP MENU
POWER ON OPTIONS
VOLUME
EXIT
PIP MENU
PIP INPUT
PIP LOCATION
PIP SIZE
PIP
DISABLE
PAP
DISABLE
HV KEYSTONE
EXIT
TINT
COLOR
DEFAULT
LANGUAGE
CHANNEL TITLE
UNDER SCAN
DISABLE
PIP MENU
POWER ON OPTIONS
VOLUME
EXIT
POWER ON OPTIONS
VIDEO 1
VIDEO 2
S-VIDEO
PC
DVI
STAND BY
EXIT
VOLUME
TINT
COLOR
DEFAULT
LANGUAGE
CHANNEL TITLE
UNDER SCAN
DISABLE
PIP MENU
POWER ON OPTIONS
VOLUME
EXIT
TINT
COLOR
DEFAULT
LANGUAGE
CHANNEL TITLE
UNDER SCAN
DISABLE
PIP MENU
POWER ON OPTIONS
VOLUME
EXIT
HORI. KEYSTONE
VERT. KEYSTONE
0
100
BRIGHTNESS
0
Bosch Security Systems | April 12, 2006
50
100
CONTRAST
0
50
100
0
0
EN | 20
MON152CL30 | Instruction Manual | Appendix
10.2
VGA / DVI Mode
AUTO
RGB
i
AUTO
RGB
i
AUTO
RGB
i
AUTO
RGB
i
AUTO
RGB
i
AUTO
RGB
i
AUTO SET
DISPLAY SETTING
COLOR TEMPERATURE
LANGUAGE
VOLUME
DEFAULT
PIP MENU
POWER ON OPTIONS
INFORMATION
EXIT
PC
ADJUSTING
EXIT
AUTO SET
DISPLAY SETTING
COLOR TEMPERATURE
LANGUAGE
VOLUME
DEFAULT
PIP MENU
POWER ON OPTIONS
INFORMATION
EXIT
DISPLAY SETTING
H. POSITION
POSTION
V. POSITION
FINE TUNE
EXIT
AUTO SET
DISPLAY SETTING
COLOR TEMPERATURE
LANGUAGE
VOLUME
DEFAULT
PIP MENU
POWER ON OPTIONS
INFORMATION
EXIT
DISPLAY SETTING
H. POSITION
POSTION
V. POSITION
FINE TUNE
EXIT
AUTO SET
DISPLAY SETTING
COLOR TEMPERATURE
LANGUAGE
VOLUME
DEFAULT
PIP MENU
POWER ON OPTIONS
INFORMATION
EXIT
DISPLAY SETTING
H. POSTION
V. POSITION
FINE TUNE
EXIT
AUTO SET
DISPLAY SETTING
COLOR TEMPERATURE
LANGUAGE
VOLUME
DEFAULT
PIP MENU
POWER ON OPTIONS
INFORMATION
EXIT
AUTO SET
DISPLAY SETTING
COLOR TEMPERATURE
LANGUAGE
VOLUME
DEFAULT
PIP MENU
POWER ON OPTIONS
INFORMATION
EXIT
Bosch Security Systems | April 12, 2006
RGB
COLOR TEMPERATURE
6500K
9300K
EXIT
LANGUAGE
ENGLISH
FRANCAIS
DEUTSCH
ESPANOL
ITALIANO
NEDERLANDS
PORTUGUES
EXIT
H. POSITION
0
200
400
V. POSITION
0
50
400
FINE TUNE
0
50
400
EN | 21
MON152CL30 | Instruction Manual | Appendix
AUTO
RGB
i
AUTO
RGB
i
AUTO
RGB
i
AUTO
RGB
i
AUTO
RGB
i
AUTO
RGB
i
AUTO SET
DISPLAY SETTING
COLOR TEMPERATURE
LANGUAGE
VOLUME
DEFAULT
PIP MENU
POWER ON OPTIONS
INFORMATION
EXIT
VOLUME
0
100
AUTO SET
DISPLAY SETTING
COLOR TEMPERATURE
LANGUAGE
VOLUME
DEFAULT
PIP MENU
POWER ON OPTIONS
INFORMATION
EXIT
AUTO SET
DISPLAY SETTING
COLOR TEMPERATURE
LANGUAGE
VOLUME
DEFAULT
PIP MENU
POWER ON OPTIONS
INFORMATION
EXIT
PIP MENU
PIP INPUT
PIP LOCATION
PIP SIZE
PIP
DISABLE
PAP
DISABLE
HV KEYSTONE
EXIT
PIP INPUT
VIDEO 1
VIDEO 2
S-VIDEO
EXIT
AUTO SET
DISPLAY SETTING
COLOR TEMPERATURE
LANGUAGE
VOLUME
DEFAULT
PIP MENU
POWER ON OPTIONS
INFORMATION
EXIT
PIP MENU
PIP INPUT
PIP LOCATION
PIP SIZE
PIP
DISABLE
PAP
DISABLE
HV KEYSTONE
EXIT
PIP LOCATION
TOP LEFT
TOP RIGHT
BOTTOM RIGHT
BOTTOM LEFT
PIP H. POSITION
PIP V. POSITION
EXIT
AUTO SET
DISPLAY SETTING
COLOR TEMPERATURE
LANGUAGE
VOLUME
DEFAULT
PIP MENU
POWER ON OPTIONS
INFORMATION
EXIT
PIP MENU
PIP INPUT
PIP LOCATION
PIP SIZE
PIP
DISABLE
PAP
DISABLE
HV KEYSTONE
EXIT
PIP LOCATION
TOP LEFT
TOP RIGHT
BOTTOM RIGHT
BOTTOM LEFT
PIP H. POSITION
PIP V. POSITION
EXIT
PIP H. POSITION
AUTO SET
DISPLAY SETTING
COLOR TEMPERATURE
LANGUAGE
VOLUME
DEFAULT
PIP MENU
POWER ON OPTIONS
INFORMATION
EXIT
PIP MENU
PIP INPUT
PIP LOCATION
PIP SIZE
PIP
DISABLE
PAP
DISABLE
HV KEYSTONE
EXIT
PIP LOCATION
TOP LEFT
TOP RIGHT
BOTTOM RIGHT
BOTTOM LEFT
PIP H. POSITION
PIP V. POSITION
EXIT
PIP V. POSITION
Bosch Security Systems | April 12, 2006
0
0
EN | 22
MON152CL30 | Instruction Manual | Appendix
AUTO
RGB
i
AUTO
RGB
i
AUTO
RGB
i
AUTO
RGB
i
AUTO
RGB
i
AUTO
RGB
i
AUTO
RGB
i
AUTO SET
DISPLAY SETTING
COLOR TEMPERATURE
LANGUAGE
VOLUME
DEFAULT
PIP MENU
POWER ON OPTIONS
INFORMATION
EXIT
PIP MENU
PIP INPUT
PIP LOCATION
PIP SIZE
PIP
DISABLE
PAP
DISABLE
HV KEYSTONE
EXIT
AUTO SET
DISPLAY SETTING
COLOR TEMPERATURE
LANGUAGE
VOLUME
DEFAULT
PIP MENU
POWER ON OPTIONS
INFORMATION
EXIT
PIP MENU
PIP INPUT
PIP LOCATION
PIP SIZE
PIP
DISABLE
PAP
DISABLE
HV KEYSTONE
EXIT
AUTO SET
DISPLAY SETTING
COLOR TEMPERATURE
LANGUAGE
VOLUME
DEFAULT
PIP MENU
POWER ON OPTIONS
INFORMATION
EXIT
PIP MENU
PIP INPUT
PIP LOCATION
PIP SIZE
PIP
DISABLE
PAP
DISABLE
HV KEYSTONE
EXIT
AUTO SET
DISPLAY SETTING
COLOR TEMPERATURE
LANGUAGE
VOLUME
DEFAULT
PIP MENU
POWER ON OPTIONS
INFORMATION
EXIT
PIP MENU
PIP INPUT
PIP LOCATION
PIP SIZE
PIP
DISABLE
PAP
DISABLE
HV KEYSTONE
EXIT
AUTO SET
DISPLAY SETTING
COLOR TEMPERATURE
LANGUAGE
VOLUME
DEFAULT
PIP MENU
POWER ON OPTIONS
INFORMATION
EXIT
POWER ON OPTIONS
VIDEO 1
VIDEO 2
S-VIDEO
PC
DVI
STAND BY
EXIT
AUTO SET
DISPLAY SETTING
COLOR TEMPERATURE
LANGUAGE
VOLUME
DEFAULT
PIP MENU
POWER ON OPTIONS
INFORMATION
EXIT
AUTO SET
DISPLAY SETTING
COLOR TEMPERATURE
LANGUAGE
VOLUME
DEFAULT
PIP MENU
POWER ON OPTIONS
INFORMATION
EXIT
i
Bosch Security Systems | April 12, 2006
HORI. KEYSTONE
VERT. KEYSTONE
INFORMATION
H. FREQUENCY: 48 KHZ
V. FREQUENCY: 60 HZ
RESOLUTION: 1024 X 768
EXIT
BRIGHTNESS
0
PIP SIZE
SMALL
MEDIUM
LARGE
EXIT
50
100
CONTRAST
0
50
100
0
0
MON152CL30 | Instruction Manual |
Bosch Security Systems | April 12, 2006
EN | 23
Americas
Bosch Security Systems
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: +1 (585) 223 4060
+1 800 289 0096
security.sales@us.bosch.com
http://www.boschsecurity.us
Europe, Middle East, Africa
Bosch Security Systems B.V.
P.O. Box 80002
5600 JB Eindhoven, The Netherlands
Phone: +31 (0) 40 27 83955
Fax:
+31 (0) 40 27 86668
emea.securitysystems@bosch.com
http://www.boschsecurity.com
© 2006 Bosch Security Systems GmbH
F01U013639_01 06-15 | Updated April 12, 2006 | Data subject to change without notice.
Asia-Pacific
Bosch Security Systems Pte Ltd
38C Jalan Pemimpin
Singapore 577180
Phone: +65 6319 3450
Fax:
+65 6319 3499
apr.securitysystems@bosch.com
http://www.boschsecurity.com