QUAD BAND EDGE Series
SGH-D807
Portable Digital Telephone
User Manual
Please read this manual before operating your phone, and keep it for
future reference.
Printed in Korea
Code No.: GH68-11340A
English 07/2006. Rev. 1.0
Intellectual Property
All Intellectual Property, as defined below, owned by or
which is otherwise the property of Samsung or its
respective suppliers relating to the SAMSUNG Phone,
including but not limited to, accessories, parts, or
software relating thereto (the “Phone System”), is
proprietary to Samsung and protected under federal
laws, state laws, and international treaty provisions.
Intellectual Property includes, but is not limited to,
inventions (patentable or unpatentable), patents, trade
secrets, copyrights, software, computer programs, and
related documentation and other works of authorship.
You may not infringe or otherwise violate the rights
secured by the Intellectual Property. Moreover, you
agree that you will not (and will not attempt to) modify,
prepare derivative works of, reverse engineer,
decompile, disassemble, or otherwise attempt to create
source code from the software. No title to or ownership
in the Intellectual Property is transferred to you. All
applicable rights of the Intellectual Property shall remain
with SAMSUNG and its suppliers.
©2006 Samsung Electronics Canada, Inc.. SAMSUNG is
a registered trademark of Samsung Electronics Co., Ltd.
and its related entities.
The Bluetooth® word mark and logos are owned by the
Bluetooth SIG, Inc. and any use of such marks by
Samsung Electronics Canada, Inc. is under license.
Other trademarks and trade names are those of their
respective owners.
Table of Contents
Important Safety Precautions.......................................... 1
Your Phone................................................................ 3
Features of Your Phone............................................................................ 3
Phone Layout ........................................................................................... 4
Display ..................................................................................................... 7
Camera..................................................................................................... 9
Memory Card ......................................................................................... 10
Getting Started ......................................................... 11
Activating Your Phone............................................................................ 11
Switching the Phone On or Off............................................................... 15
Call Functions .......................................................... 17
Selecting Functions and Options............................................................
Making a Call..........................................................................................
Adjusting the Volume.............................................................................
Answering a Call ....................................................................................
Viewing Missed Calls .............................................................................
Quiet mode.............................................................................................
17
19
21
21
22
24
Options During a Call .................................................. 25
Putting a Call on Hold ............................................................................
Making a Multi-party Call .......................................................................
Switching the Microphone Off (Mute) ....................................................
Sending a Sequence of DTMF Tones......................................................
Searching for a Number in the Contact list.............................................
Using Text Messages .............................................................................
Call Waiting............................................................................................
25
25
27
27
28
28
28
Entering Text ........................................................... 30
Changing the Text Input Mode ...............................................................
Using T9 Mode.......................................................................................
Using Alphabet Mode.............................................................................
Using Number Mode ..............................................................................
Using Symbol Mode...............................................................................
30
31
32
34
34
Transferring Files between your Phone and PC................... 35
Transferring files over the USB cable ..................................................... 35
i
Transferring Files via Bluetooth.............................................................. 36
Transferring Files via your microSD card ............................................... 37
Menus.................................................................... 42
List of Menu Functions........................................................................... 43
Call History.............................................................. 58
All Calls ..................................................................................................
Missed Calls...........................................................................................
Calls Made .............................................................................................
Calls Received........................................................................................
Delete All................................................................................................
Call Time ................................................................................................
58
58
59
59
60
60
Messages................................................................ 62
Instant Messaging..................................................................................
Create New Message..............................................................................
My Messages .........................................................................................
Templates ..............................................................................................
Voice Mail ..............................................................................................
Delete All................................................................................................
Settings..................................................................................................
Broadcast...............................................................................................
Memory Status.......................................................................................
Samsung PC Studio 3 ............................................................................
62
63
67
69
69
70
71
74
74
75
Games.................................................................... 76
Get Games ............................................................................................. 76
My Games.............................................................................................. 76
Tools ..................................................................... 78
Alarm .....................................................................................................
Calendar.................................................................................................
Task .......................................................................................................
Note .......................................................................................................
Organizer................................................................................................
78
80
83
84
84
Rogers Mall ............................................................. 87
Get Music & Tones................................................................................. 87
Get Games ............................................................................................. 87
Get Graphics .......................................................................................... 87
ii
Get Email/Chat .......................................................................................
Get TV/Video ..........................................................................................
Get Celebrity Voicemail ..........................................................................
Get News & Info.....................................................................................
Search....................................................................................................
Navigating the Internet Browser.............................................................
87
88
88
88
88
89
Media .................................................................... 91
Camera................................................................................................... 91
MP3 Player............................................................................................. 96
Record Audio ......................................................................................... 98
Voice Command................................................................................... 100
Samsung PC Studio ............................................................................. 106
File Manager........................................................... 107
Ring Tunes...........................................................................................
Graphics...............................................................................................
Video....................................................................................................
Music ...................................................................................................
Other Files............................................................................................
Memory Card .......................................................................................
Memory Status.....................................................................................
Samsung PC Studio 3 ..........................................................................
107
109
111
112
113
114
115
115
Contacts ................................................................ 116
Contact List..........................................................................................
Add New Contact..................................................................................
Group...................................................................................................
Speed Dial............................................................................................
My Name Card .....................................................................................
Own Number........................................................................................
Management ........................................................................................
Service Number ...................................................................................
Samsung PC Studio .............................................................................
116
118
119
121
122
122
123
125
126
Settings................................................................. 127
Time & Date .........................................................................................
Phone Settings.....................................................................................
Display Settings ...................................................................................
Sound Settings.....................................................................................
127
128
130
133
iii
Network Services .................................................................................
Bluetooth..............................................................................................
Security................................................................................................
Connection Settings .............................................................................
Voice Command Settings.....................................................................
Reset Settings......................................................................................
136
140
143
146
148
148
Access Codes.......................................................... 149
Phone Password ..................................................................................
PIN.......................................................................................................
PUK......................................................................................................
PIN2.....................................................................................................
PUK2....................................................................................................
149
150
150
150
151
Solving Problems...................................................... 152
Health and Safety Information ...................................... 155
Exposure to Radio Frequency (RF) Signals ..........................................
For Body Operation ..............................................................................
Precautions When Using Batteries .......................................................
Operating Environment ........................................................................
Electronic Devices................................................................................
Potentially Explosive Environments......................................................
Emergency Calls...................................................................................
Other Important Safety Information .....................................................
Care and Maintenance..........................................................................
FCC Notice ...........................................................................................
Appendix A: CERTIFICATION INFORMATION (SAR).............................
Appendix B: Safe and Responsible Wireless Phone Use ......................
Appendix C: Consumer Update on Wireless Phones ............................
155
156
157
158
158
160
160
161
162
163
164
165
169
STANDARD LIMITED WARRANTY .................................... 178
Index .................................................................... 183
iv
Important Safety Precautions
Please read these guidelines before using your wireless phone.
Failure to comply with them may be dangerous or illegal.
Road Safety at All Times
Do not use a hand-held phone while driving; park the vehicle first.
Switching Off When Refueling
Do not use the phone at a refueling point (service station) or near
fuels or chemicals.
Switching Off in an Aircraft
Wireless phones can cause interference. Using them in an aircraft is
both illegal and dangerous.
Switching Off in Hospitals
Switch your phone off near medical equipment. Follow any
regulations or rules in force.
Interference
All wireless phones may be subject to interference, which could
affect their performance.
Special Regulations
Follow any special regulations in force in any area and always switch
your phone off whenever it is forbidden to use it, or when it may
cause interference or danger (for example, in a hospital).
Important Safety Precautions
1
Sensible Use
Use the phone only in the normal position (held to the ear). Avoid
unnecessary contact with the antenna when the phone is switched
on.
Emergency Call
Ensure the phone is switched on and in service. Key in the
emergency number for your present location, then press the
key.
You must deactivate any unnecessary features before you can make
an emergency call. Give all the necessary information as accurately
as possible. Do not end the call until given permission to do so.
Water Resistance
Your phone is not water-resistant. Keep it dry.
Accessories and Batteries
Use only Samsung-approved accessories and batteries. Use of any
unauthorized accessories could damage your phone and may be
dangerous.
Qualified Service
Only qualified service personnel may repair your phone.
For more detailed safety information, see “Health and Safety
Information” on page 155.
Important Safety Precautions
2
Your Phone
Features of Your Phone
Your phone is lightweight, easy-to-use and offers many exciting
features. The following list outlines a few of the features included in
your phone.
♦1.3 Megapixel camera and camcorder
♦Bluetooth® wireless technology
♦Voice recording capability
♦Voice Command technology for hands-free operation
♦Multimedia capability capable of playing MP3s, downloaded
ringtunes and videos
♦microSD card slot for additional storage
♦Tools and File Manager feature provides file manager, audio player,
calendar, calculator, world time, unit converter, timer, and
stopwatch.
Your Phone
3
Phone Layout
Open View of Your Phone
The following illustrations show the main elements of your phone:
9. Earpiece
10. Camera Lens
1. LCD Display
8. Navigation keys
7. Internet key
2. Voicemail key
6. Alphanumeric keypad
3. Asterisk/
Shift key
5. Pound/Space/
Quiet Mode key
4. Microphone
1. The LCD Display screen displays the time and date, messages
and numbers, as well as the current function of the left and right
soft keys.
2. In Idle mode, the
key accesses voice mail when held down.
3. The
key is used to enter special characters and perform
various functions. In text entry mode, the
key is used to
change case or change the text entry method.
4. The Microphone is used during phone calls and voice note
recordings.
Your Phone
4
5. In Idle mode, press and hold the
key is used to activate/
deactivate Quiet mode. In text entry mode, the
key is used to
insert a space. Press and hold the
key to switch to Symbol
mode.
6. The Alphanumeric keys enter numbers, letters, and some special
characters.
7. In Idle mode, the Internet key launches the WAP (Wireless
Application Protocol) browser.
In Menu mode, the Internet key selects the highlighted menu
options.
When the Left soft key shows Options, the Internet key selects
the first option in the options list.
8. In Menu mode, the Navigation keys scroll through the menus
and menu options.
During text entry, the Navigation keys move the cursor to the left
or right, depending on which side you press.
In Idle mode, the Navigation keys act as shortcuts, allowing you
to access other menus directly. You can customize your shortcuts
(Menu 9.2.4) to your own personal preferences. The default
shortcuts are:
Press Up to access the Camera.
Press Left to access
the Call History
menu.
Press Right to
access the
Messages menu.
Press Down to open the Contact List.
Your Phone
5
9. The Earpiece is used to listen to audio from your phone.
10. Camera Lens: The camera lens used for taking photos and
videos.
Closed View of Your Phone
1. Headset/Power
connector
7. microSD card slot
2. Volume key
3. Soft key (left)
4. Send key
3. Soft key (right)
6. End key
5. Clear key
1. The Headset/Power connector is used for the hands-free
headset. Plug your battery charger cable or your USB cable here.
2. During a call, the Volume key adjusts the speaker or headset
volume.
In Idle mode with the phone open, the volume key adjusts the key
volume. With the phone closed, turns on the external display
when held down.
3. The Soft key (left/right) perform the functions indicated by the
screen text on the bottom line of the display above the key.
4. The Send key makes or answers a call.
In Idle mode, the Send key recalls the last number dialed or
received when held down.
Your Phone
6
5. The Clear key deletes characters from the display.
6. The End key hangs up the phone to end a call. The end key also
switches the phone on and off when held down.
In Menu mode, the end key cancels your input and returns the
phone to Idle mode.
7. microSD card slot. This expansion slot allows you to insert a
microSD card to add additional memory and storage capacity for
your music, video and photos.
Display
Display Layout
The display has the following areas:
G
Icons
Text and graphics area
Menu
Mall
Soft key function indicators
Your Phone
7
Area
Description
Icons
Displays various icons. See page 8.
Text and
graphics area
Displays messages, instructions and any
information that you enter, such as the number you
are dialing.
Soft key
indicators
Shows the current functions assigned to the two
soft keys.
Icons
Shows the received signal strength. The greater the
number of bars, the stronger the signal.
Appears when a new text message has been received.
Appears when a new voice mail has been received.
Appears when a new multimedia message has been
received.
Appears when you set an alarm to ring at a specified time.
For details, see page “Alarm” on page 78.
Appears when there is no network coverage available.
Appears when a call is in progress.
Appears when you are connected to a WAP service.
Appears when the Call Forwarding feature is active. For
details, see page “Call Forwarding” on page 136.
Appears when incoming call Alert Type is set to Vibration.
Appears when an incoming call Alert Type is set to
Vibration & melody.
Your Phone
8
Appears when an incoming call Alert Type is set to
Vibration then Melody.
Appears when Quiet Mode, Silent All is active.
Appears when Quiet Mode, Vibration All is active.
Shows the level of your battery. The more bars you see, the
more power you have remaining.
Bluetooth feature is active.
Indicates that a microSD card is inserted in the handset.
Backlight
The backlight illuminates the display and the keypad. When you press
any key or open the phone, the backlight turns on and remains on for
a given period of time, depending on your setting in the Backlight
menu (Menu 9.3.5). When no keys are pressed, the display dims and
turns off after a specified length of time to conserve your battery
power.
♦To specify the length of time the backlight is active, use the
Backlight menu (Menu 9.3.5). See “Backlight” on page 131 for
further details.
Camera
The embedded camera on the front of your phone allows you to take
a photo or record a video while on the move. For further details about
the Camera feature, see page 91.
Your Phone
9
Memory Card
Your phone allows you to use a microSD card and an adapter to
expand the phone’s available memory space. This memory card and
adapter enables images, music, and voice data to quickly and easily
be exchanged between SD-compatible devices. For more
information, see “Transferring Files via your microSD card” on
page 37.
Your Phone
10
Getting Started
Activating Your Phone
When you subscribe to a cellular network, a plug-in SIM card loaded
with your subscription details, such as your PIN and other optional
services.
Removing the Battery
1. If necessary, power-off the phone by holding down the
until the power-off image displays.
key
2. Remove the battery cover by 1) pressing the battery lock down
and holding it in position, then 2) slide the battery cover down, as
shown.
Getting Started
11
3. Remove the battery by lifting up, as shown.
Installing the SIM Card
Note: Important! The plug-in SIM card and its contacts can be easily damaged by
scratches or bending. Use caution when inserting or removing the card and keep all SIM
cards out of reach from children.
Make sure the gold contacts of the card face into the phone, then
slide the SIM card into the socket.
Getting Started
12
Removing the SIM Card
To remove the SIM card, slide it away from the handset. See the
following illustration.
Installing the Battery
1. Align the battery so that the 3 brass tabs on the end align with the
3 brass prongs at the bottom of the battery compartment.
Getting Started
13
2. Press the battery down until it clicks into place. Make sure that
the battery is properly installed before switching on the phone.
Charging a Battery
Your phone is powered by a rechargeable Li-ion battery. Use the
travel adapter to charge the battery, and use only Samsung approved
batteries and chargers.
Note: You must fully charge the battery before using your phone for the first time. A
discharged battery recharges fully in approximately 200 minutes. You can use the phone
while the battery is charging, but this causes the phone to charge more slowly.
1. With the battery in position on the phone, plug the connector of
the travel adaptor into the jack on the left side of the phone.
2. Plug the adaptor into a standard AC wall outlet. When charging is
finished, unplug the adaptor from the power outlet.
Getting Started
14
Note: For connection to an electrical supply not located in North America, you must use
an adaptor of the proper configuration for the power outlet. Use of the wrong adaptor
could damage your phone and void your warranty.
Note: You must unplug the adaptor before removing the battery from the phone during
charging to avoid damage.
Low Battery Indicator
When the battery is weak and only a few minutes of talk time remain,
a warning tone sounds and the “Warning Low Battery” message
repeats at regular intervals on the display. The backlight turns off to
conserve the remaining battery power. When the battery level
becomes too low, the phone automatically turns off.
Switching the Phone On or Off
1. Open the phone.
2. Press and hold the
key until the phone switches on.
3. If the phone asks you to enter the phone password, enter the
password and press the OK soft key. It is preset to “00000000” at
the factory. For further details, see “Change Password” on
page 144.
Getting Started
15
4. If the phone asks for a PIN, enter the PIN and press the OK soft
key. For further details, see “PIN Check” on page 143.
The phone searches for your network and, after finding it, the idle
screen appears on the display. You can now make or receive a call.
The display language is preset to Automatic and is dependent on
the setting in the SIM as determined by your service provider. To
change the language, use the Language menu (Menu 9.2.1). For
further details, see “Language” on page 128.
5. When you wish to switch the phone off, press and hold the
key until the power-off image displays.
Getting Started
16
Call Functions
Selecting Functions and Options
The roles of the soft keys vary depending on the function you are
currently using. The labels on the bottom line of the display just
above each key indicate their current role.
Menu
Press the Left soft key for
Menu mode.
The Left soft key
Mall
Press the Right soft key
to access the Mall menu.
can be used in several different ways.
♦In Idle mode, press to access the Menu.
♦When using other features, such as the web browser, the left soft
key performs a context-sensitive action, such as displaying the
Options submenu. This action is shown in the bottom left corner of
the Display Screen.
♦Some submenus display
to the right of an option, indicating
additional sub-options. Highlight the option and press either the
Right navigation key or the
key to display the sub-options.
The Right soft key
can also be used in several different ways.
♦In Idle mode, press to access the Mall. (See “Rogers Mall” on
page 87.)
♦When using other features, such as the web browser, the right soft
key performs a context-sensitive action such as displaying the
Call Functions
17
Back option. This action is shown in the bottom right corner of the
Display Screen.
To
Press the
move up one level in the
menu tree
Back soft key.
exit without changing the
settings
key.
select the displayed
function displayed or
option
Select soft key
view the next function or
highlight the next option
on a list
Down key or by pressing down on the
volume key
on the left side of the
phone.
move to the previous
function or option on a list
Up key or by pressing up on the
volume key
on the left side of the
phone.
♦In some functions, you may be asked for a password or PIN. Enter
the code and press the OK soft key.
Note: When you access a list of options, your phone highlights the current option. If,
however, there are only two options, such as On/Off or Enable/Disable, your phone
highlights the option that is not currently active so that you can select it directly
Call Functions
18
Making a Call
When the idle screen displays, enter the area code and phone
key.
number, then press the
Note: When you activate the Auto Redial option in the Extra Settings menu (Menu
9.2.5), the phone automatically redials up to ten times when the person does not answer
the call or is already on the phone. For carriers that automatically divert unanswered call
to voice mail, the Auto redial feature will not provide useful service. See “Extra Settings”
on page 129 for further details.
Making an International Call
1. Press and hold the
key. The + character appears.
2. Enter the country code, area code and phone number and press
the
key.
Correcting the Number
To clear
the last digit
displayed
any other digit in the
number
Press the
key.
Left or Right key until the cursor is immediately
to the right of the digit to be cleared. Press the
key. You can also insert a missing digit
simply by pressing the appropriate key.
the whole display
key and hold it for more than one second.
Ending a Call
When you want to end your call, briefly press the
phone closed.
key or slide the
Call Functions
19
Redialling the Last Number
The phone stores the numbers you have dialed, received or missed if
the caller is identified. See “Call History” on page 58 for further
details.
To recall any of these numbers:
1. If you have typed characters on the display, press either the Back
soft key or the
key to return to Idle mode.
2. Press the
key to display your Call History. By default, the All
Calls list is displayed, showing all numbers made, received or
missed.
3. Use the Up and Down keys to scroll through the numbers until
the number you want is highlighted.
To
dial the number
Press the
key.
edit the number
Options soft key and select Details. The
number is displayed For further details,
see “Correcting the Number” on
page 19.
delete the number
Options soft key and select Delete
followed by Selected.
delete all of the
numbers in the Call
History list
Options soft key and select Delete
followed by All. For further details, see
“Delete All” on page 60.
Call Functions
20
Making a Call from Contact list
You can store the phone numbers that you use regularly in the SIM
card or the phone’s memory, which are collectively called
Contact List. Simply select a name to recall the associated number.
For further details, see “Contacts” on page 116.
Adjusting the Volume
During a call, if you want to adjust the earpiece volume, use the
Volume keys on the left side of the phone.
♦Press the volume key
up to increase the volume level and down
to decrease the level.
♦In Idle mode, you can also adjust the keypad tone volume using
these keys.
Answering a Call
When somebody calls you, the phone rings and displays the
incoming call image. When the caller can be identified, the caller’s
phone number or name, if stored in your Contact list, displays.
To answer a call
1. If necessary, open the phone.
2. Press the
call.
key or the Accept soft key to answer the incoming
♦When the Anykey Answer option in the Extra Settings menu
(Menu 9.2.5) is activated, you can press any key to answer a
call except for the
key and the Reject soft key. See “Extra
Settings” on page 129.
♦When the Accept Call option in the Slide Settings menu
(Menu 9.2.3) is activated, you can answer the call simply by
opening the slide.
Call Functions
21
♦To reject the call, press and hold one of the side Volume keys
, or press the Reject soft key or
side Volume keys
key. A quick press of the
silences the ringer for the incoming call.
3. End the call by pressing the
key.
Note: You can answer a call while using the Contact list or menu features. After ending
the call, the phone returns to the function screen you were using.
Viewing Missed Calls
When you are unable to answer a call, you can find out who called.
The number of calls you missed is displayed on the idle screen
immediately after a call is missed.
To view the missed call immediately:
1. If necessary, slide the phone open.
2. Press the View soft key.
The number for the most recent missed call displays, if available.
To
scroll through the missed
calls
call the number displayed
edit or delete a missed
call number
Call Functions
22
Press the
Up or Down key.
key.
Options soft key.
Saving a Missed Call Number
Note: When the number for the missed call is not available, the Edit option does not
display.
1. Press the View soft key.
2. Press the Up or Down key to highlight the number you wish to
save and press the Options soft key.
3. Select Save to Contacts and press the Select soft key.
4. Choose between the Phone and SIM locations and press the
Select soft key.
If you selected Phone, use the up and down keys to select the
phone category and press the Select soft key.
5. Enter the Name or choose from the provided list and press the
Save soft key.
For more options on this function, see “Storing a Number in Idle
Mode” on page 118.
Deleting a Missed Call
1. Press the Options soft key.
2. If necessary, press the Up or Down key to highlight the Delete
option.
3. Press the Select soft key to delete the currently-highlighted call
or All to delete all your missed calls.
You can press the
key at any time to exit the Missed Call feature.
Call Functions
23
Note: You can access the Missed Call feature at any time by selecting the Missed Calls
menu (Menu 1.2). For further details, see “Missed Calls” on page 58.
Quiet mode
Quiet mode is convenient when you wish to stop the phone from
making noise, such as when you are in a theater, for example.
♦In Idle mode, press and hold the
key until the “Silent All
Activated” or “Vibration All Activated” message and icon ( )
display.
♦To return to normal, press and hold the
key until the “Exit
Quiet Mode” message displays.
Call Functions
24
Options During a Call
Your phone provides a number of features that you can use during a
call.
Putting a Call on Hold
You can place the current call on hold whenever you want. You can
make another call while you have a call in progress if your network
supports this service.
♦To place a call on hold, simply press the Options soft key and
select Hold. You can reactivate the call whenever you want, by
pressing the Resume soft key.
To make a call while you have a call in progress:
1. To place a call on hold, simply press the Options soft key and
select Hold. Your current call is placed on hold.
2. Enter the phone number that you wish to dial.
3. Press the
key to dial the second call.
♦When you have an active call and another call on hold, you may
switch between the two calls, placing the active call on hold.
Simply press the Swap soft key.
The current call is placed on hold and the call on hold is
reactivated so that you can continue conversing with the other
person.
4. When you want to finish, end each call by pressing the
key.
Making a Multi-party Call
A multi-party call is a network service that allows up to six people to
take part simultaneously in a multi-party or conference call.
Options During a Call
25
Note: Please contact your service provider to determine if multi-party calling is
supported.
Setting up the Multi-party Call
1. Call the first participant in the normal way.
2. Call the second participant in the normal way. The first call is
automatically put on hold.
3. To join the first participant to the multi-party call, press the
Options soft key and select the Join option. Press the Select soft
key.
4. To add a new person to the multi-party call, call the person in the
normal way and press the Options soft key. Select the Join option
and press the Select soft key.
You can also add incoming callers by answering the call, pressing
the Options soft key, and selecting the Join option. Repeat as
required.
Having a Private Conversation with One Participant
1. Press the Options soft key and select Split, and press the OK soft
key.
You can now talk privately to that person. The other participants can
still converse with each other.
2. To return to the multi-party call, press the Options soft key and
select the Join option. Press the OK soft key.
All the multi-party call participants can now hear each other.
Options During a Call
26
Dropping One Participant
1. Press the Options soft key and select the Remove option and
press the OK soft key.
The call ends with that participant, but you can continue to talk to the
others.
2. When you want to end the multi-party call, press the
key.
Switching the Microphone Off (Mute)
You can temporarily switch your phone’s microphone off so that the
other person on the call cannot hear you. For example, you wish to
say something to another person in the room but do not want the
person on the call to hear you.
To switch the microphone off temporarily:
♦Press the Mute soft key. The other person can no longer hear you.
To switch the microphone back on:
♦Press the Unmute soft key. The other person can hear you again.
Sending a Sequence of DTMF Tones
You can send the DTMF tones after entering the entire number you
need to send. This option is helpful for entering a password or an
account number when you call an automated system, like a banking
service.
To send the DTMF tones:
1. When you are connected to the teleservice system, press the
Options soft key.
2. Press the Down key to highlight the Send DTMF option.
3. Press the Select soft key.
Options During a Call
27
4. Enter the number you want to send and press the OK soft key. The
tones are sent.
Searching for a Number in the Contact list
You can search for a number in the Contact list during a call.
1. Press the Options soft key.
2. Press the Down key to highlight the Contact List option and
press the Select soft key.
3. Enter the name that you wish to find.
If you enter the first few letters of the name, the Contact list entries
are listed, starting with the first entry matching your input.
4. To view the highlighted entry, press the
key.
For further details about the Contact list feature, see “Contacts” on
page 116.
Using Text Messages
If you receive a text message during a call, the Message icon (
)
flashes on the display. Press the View soft key to view your list of text
messages. For more information, see “My Messages” on page 67.
♦To write a text message during a call, press the Options soft key
and select Messaging. You can use the Text Message menu
(Menu 2.2.1) to write new text messages. For further details about
text messaging, refer to “Creating a Text Message” on page 48
Call Waiting
You can answer an incoming call while you have a call in progress, if
your network supports this service and you have set the Call Waiting
option (Menu 9.5.3) to Activate. For further details about call
waiting, see “Call Waiting” on page 138.
Options During a Call
28
To answer a call while you have a call in progress:
1. Press the
key or the Accept soft key to answer the incoming
call. The first call is automatically put on hold.
2. To switch between the two calls, press the Options soft key and
select Swap.
3. To end the call being held, press the Options soft key and select
the End Held Call option.
To end the current call, press the
key.
Options During a Call
29
Entering Text
When using your phone, you will often need to enter text, such as
when storing a name in the Contact list, creating your personal
greeting or scheduling events on your calendar. You can enter
alphanumeric characters by using your phone’s keypad.
Your phone has the following text input modes:
♦T9 mode: This mode allows you to enter words with only one
keystroke per letter. Each key on the keypad has more than one
letter; for example, when you press the
key once, J, K or L
displays. T9 mode automatically compares your keystrokes with an
internal linguistic dictionary to determine the correct word, thus
requiring far fewer keystrokes than the traditional Alphabet mode.
♦Alphabet mode: this mode allows you to enter letters by pressing
the key labeled with the letter you want. Press the key once, twice,
three or four times until the desired character displays.
♦Number mode: this mode allows you to enter numbers.
♦Symbol mode: this mode allows you to enter various symbols and
special characters.
Changing the Text Input Mode
When you are in a field that allows characters to be entered, you will
notice the text input mode indicator near the top-right corner of the
display.
Text Input
Mode Indicator
To change the text input mode:
Entering Text
30
♦Press and hold the
key to switch between
: Alphabet
mode and
: T9 mode.
♦Press the
key to cycle between upper and lower case (for both
T9 mode and Alphabet mode) and for
: Numeric mode.
Note: If you press and hold the
key while in Numeric mode, you will switch
between Alphabet mode and T9 mode the next time you press
to exit Numeric
mode.
Using T9 Mode
T9 is a predictive text input mode that allows you to key in any
character using a single keystroke. This text input mode is based on a
built-in dictionary. Your phone will select the most likely word based
on your keystroke combinations.
To enter a word in T9 mode:
1. When you are in T9 mode, start entering a word by pressing the 2
to 9 keys. Press each key only once for each letter.
Example: To enter “HELLO” in T9 mode, press the
and
keys.
,
,
,
The word that you are typing appears on the display. It may change
with each key that you press.
2. Enter the whole word before editing or deleting the keystrokes.
3. When the word displays correctly, go to step 4.
If the word displayed is not the one you want, press the
key to
display alternative word choices for the keys that you have pressed.
4. Insert a space by pressing the
word.
key and start entering the next
Entering Text
31
To add a new word into the T9 dictionary:
1. After pressing the keys corresponding to the word you want to
add, press the
key to display the alternative words.
2. When you press the
key on the last alternative word, the
left soft key changes to Add. Press the Add soft key.
3. If necessary, clear the word using
and enter the word you
want using Alphabet mode. See page 32.
4. Press the OK soft key. The word is added to the T9 dictionary and
becomes the first word for the associated key presses.
♦To enter periods, hyphens or apostrophes, press the
key. T9
mode applies grammar rules to ensure that the correct punctuation
is used.
♦To shift the case in T9 mode, use the
key.
♦You can move the cursor by using the Left and Right keys. To
delete letters, press
. Press and hold
to clear the display.
Using Alphabet Mode
Use the 0 to 9 keys to enter your text.
1. Press the keys labeled with the letter you want:
• Once for the first letter
• Twice for the second letter
• And so on
2. Select the other letters in the same way.
Note: The cursor moves to the right when you press a different key. When entering the
same letter twice or a different letter on the same key, just wait for a few seconds for the
cursor to move to the right automatically, and then select the next letter.
Entering Text
32
Refer to the table below for further details about the characters
available:
Characters in the Order Displayed
Key
Upper Case
Lower Case
space
0 space
space
space
0
♦To shift the case in Alphabet mode, use the
key.
♦You can move the cursor by using the Left and Right keys. To
delete letters, press
. Press and hold
to clear the display.
Entering Text
33
Using Number Mode
Number mode enables you to enter numbers into a text message.
Press the keys corresponding to the digits you want to enter.
Using Symbol Mode
Symbol mode enables you to insert symbols into a text message.
Press and hold the
key access Symbol mode.
To
Press the
select a symbol
corresponding number key adjacent
the symbol.
display more symbols
Up or Down key.
clear the symbol(s)
key.
insert the symbol(s) into
your message
OK soft key.
cancel your input and
return to the previous
mode
Back soft key.
Entering Text
34
Transferring Files between your
Phone and PC
You can transfer songs and other files such as pictures, video clips,
or Personal Information Management (PIM) files between your
phone and personal computer in several different ways, including:
♦using the USB cable provided with your phone
♦using the phone’s Bluetooth feature
♦using the microSD card reader
♦downloaded over the wireless Internet
Your phone comes with Samsung’s PC Studio 3 software, which
allows you to manage your Contacts, transfer messages, song and
other files between your phone and a computer.
Note: For more information on the Samsung PC Studio 3, consult the online help
provided with the PC Studio 3 software.
Transferring files over the USB cable
Using PC Studio 3, you can transfer files such as mp3s from your
computer to your phone over a USB cable.
1. Install the Samsung PC Studio 3 software (provided with you
phone) on your PC.
2. Connect the USB cable to a USB port on your PC and to your
phone.
3. Start the PC Studio 3 software.
4. Select Manage Files. The Phone Explorer window appears. Your
phone’s folders are displayed in the top left part of the window
and your computer’s folders are displayed in the bottom left part
of the window.
Transferring Files between your Phone and PC
35
5. Using the Phone Explorer, navigate to the folder(s) containing the
files you wish to transfer. You can drag and drop files between
your computer’s and your phone’s folders.
Note: When transferring mp3 files onto your phone place them in the Music folder on
your phone.
Note: Files transferred from the computer are stored in your phone’s memory. If desired,
you can transfer them from the phone’s memory to a microSD card.
Transferring Files via Bluetooth
1. Install the Samsung PC Studio 3 software (provided with you
phone) on a Bluetooth-enabled PC.
2. Start the PC Studio 3 software.
3. Select Manage Files. The Phone Explorer window appears.
4. From the Menu bar, select File>Connection. Select Bluetooth. If
you do not have a Bluetooth connection established, follow the
on-screen instructions to create your connection.
Note: To receive data via Bluetooth, your phone’s Bluetooth feature must be active. For
more information on activating Bluetooth on your phone, see “Turn Bluetooth On/Off” on
page 140.
5. Using the Phone Explorer, navigate to the folder(s) containing the
files you wish to transfer. You can drag and drop files between
your computer’s and your phone’s folders.
Note: When transferring mp3 files onto your phone place them in the Music folder on
your phone.
Transferring Files between your Phone and PC
36
Note: Files transferred from the computer are stored in your phone’s memory. If desired,
you can transfer them from the phone’s memory to a microSD card.
Transferring Files via your microSD card
Your phone is equipped with a 32 MB microSD (Secure Digital)
memory card and its adapter to expand the phone’s available
memory space. It allows you to easily store images, videos, music
files, and voice data in your phone.
Note: Before using your microSD card, it must be formatted with a FAT32 file system.
Please check the documentation that comes with your memory card before using it with
your handset.
Inserting the microSD Card
To insert the microSD card into your phone:
1. With the microSD card slot opened, and the gold contacts facing
up, insert the microSD card into the slot.
2. Position the microSD card perpendicular to the opening and
gently slide it into place until it is fully inserted and locked. Ensure
Transferring Files between your Phone and PC
37
that the microSD card is locked in place before replacing the
protective cover.
Note: If this is the first time that the microSD card is inserted into your phone, your
phone will create folders for Music, Sounds, Images, etc.
Note: Be sure to use only recommended memory cards (8 MB – 512 MB). Using nonrecommended memory cards could cause data loss and damage your phone
microSD Icon Indicators
The following icons will appear on your phone’s display screen when
a microSD card is properly inserted into the microSD card slot:
Indicates that a microSD card is inserted in the handset.
Note: Make sure your battery is fully charged before using the microSD card. Your data
may become damaged or unusable if the battery runs out while reading or writing to the
microSD card.
Transferring songs via your microSD card
You can copy music, and other files from your PC directly to your
microSD card.
Transferring Files between your Phone and PC
38
1. Insert the microSD card into your PC’s card reader. For more
information on how to insert a microSD card into an SDcompatible reader, see “Using the microSD adapter” on page 40.
2. If the card has not previously been inserted into your phone,
create a Folder on your microSD card called “Music”.
Note: When you insert your microSD card into your phone, the Music folder is
automatically created.
3. Copy your music files to the Music folder on the microSD card.
4. When you are finished copying the files, transfer the microSD
card to your phone.
Note: Samsung recommends to use PC Studio 3 for transferring file and music.
Removing the microSD Card
To remove the microSD card from your phone:
1. Open the microSD access panel located on the bottom-left
side of the phone.
2. Use your thumb to press and release the microSD card. It
will pop-out to allow you to remove the card.
Transferring Files between your Phone and PC
39
3. Pull the microSD card out of the handset.
Warning: DO NOT remove a microSD card while files are being accessed or transferred. It
could result in loss or damage of data.
Note: If you remove your memory card, the location to save images will automatically
default back to In Phone.
Using the microSD adapter
The supplied microSD adapter allows microSD cards to be used in
SD-compatible devices. Before using it with your SD card reader, you
will need to insert the microSD card into the microSD adapter.
To insert the microSD card into the microSD adapter:
♦With the label side of the microSD card facing up, insert the
card into the supplied microSD adapter and gently slide the
card until it is fully inserted.
Transferring Files between your Phone and PC
40
To remove the microSD card from the microSD adapter:
♦Hold the front edge of the microSD card and gently pull
outward to remove it from the adapter.
Transferring Files between your Phone and PC
41
Menus
The navigation key on your phone allows you to scroll through
menus quickly and easily. The scroll bar at the right of the menu
keeps track of your position in the menu at all times.
♦To navigate through a menu, simply press the navigation key up or
down. If you are in a first-level menu, such as Settings, you may
also navigate to the next menu by pressing the navigation key left
or right.
♦As you navigate through the menu, menu options are highlighted.
Select any numbered option by simply pressing the corresponding
number on the phone’s keypad. You may also select any item by
highlighting it and pressing the Select soft key or the
key.
♦Some submenus display
to the right of an option, indicating
additional sub-options. Highlight the option and press either the
Right navigation key or the
key to display the sub-options.
Accessing a Menu Function
1. In Idle mode, press the Menu soft key to access Menu mode.
From the Menu, do one of the following:
♦Scroll using the Up, Down, Left and Right keys to reach a main
menu, Settings for example. Press the Select soft key or the
key to enter the highlighted menu.
♦Press the # beside the desired menu option. For example, for
Settings, press
.
2. If the menu contains sub-menus, Language for example, you can
access them by scrolling using the Up or Down key and pressing
the Select soft key or the
key. Alternatively, press the
number beside the desired sub-menu option.
If the menu that you have selected contains further options,
repeat this step.
Menus
42
To
Press the
scroll through the menus
Up or Down key, or the Volume
key.
confirm the chosen
setting
Select soft key or
return to the previous
menu level
Back soft key or
exit the menu without
changing the settings
key.
key.
key.
List of Menu Functions
The following list shows the menu structure available and indicates
the number assigned to each option and the page where you can find
a description of each feature.
1. Call History
1.
All Calls
2.
Missed Calls
3.
Calls Made
4.
Calls Received
5.
Delete All
(See page 58)
• All Calls
• Missed Calls
• Calls Made
• Calls Received
6.
Call Time
• Last Call Time
• Total Sent
• Total Received
Menus
43
2. Messages
1.
(See page 62)
Instant Messaging*
1. Sign In
2. Saved Conversations
3. Offline Conversations
4. Settings (See below for expanded menu tree)
5. Help
1.Service Provider Info.
2.About Msn Messenger/help Text
2.
Create New Message
1. Text Message
2. Multimedia Message
3.
My Messages
1. Inbox
2. Sent
3. Outbox
4. Drafts
5. My Folders
4.
Templates
5.
Voice Mail
1. Connect to Voice Mail
2. Voice Server Number
6.
Delete All
• All Messages
• Inbox
• Read
• Unread
• Sent
• Outbox
• Drafts
7.
Settings
1. Instant Messaging
1.Choose Your Community
• MSN Messenger
• Yahoo!
2.Profile Settings
• GoRogers
*. The first time you use Instant Messaging, you will be prompted to
choose between MSN Messenger and Yahoo!.
Menus
44
• Rogers Media
• Rogers Internet
3.Community Settings
• Sounds
• Sort
• By Alphabet/Alphabet
• By Status/Alphabet
• Auto Sign In
2. Text Message
1.Send Settings
• Reply Path
• Delivery Report
• Bearer Selection
• GSM
• GPRS Preferred
2.Current Profile
• Setting 1
3.Text Message Profile
1.Setting 1
• Service Center
• Default Destination
• Default Type
•Text
• Fax
• Email
• Paging
• Default Validity
•Maximum
•One hour
•6 hours
•24 hours
•One week
• Setting Name
3. Multimedia Message
1.Send Settings
• Delivery Report
• Read Reply
• Priority
• Normal
Menus
45
• High
• Low
• Expiry Date
• Maximum
• 1 Hour
• 12 Hour
• 1 Day
• 1 Week
• Delivery Time
• Immediately
• 1 Hour Later
• 12 Hour Later
• 1 Day Later
• 1 Week Later
2.Retrieve Settings
• Anonymous Reject
• ADS Allowed
• Information Allowed
• Report Allowed
• Auto Download
3.Profile
• GoRogers
• Rogers Media
• Rogers Internet
4. Push Message
• Receive
• Always
• SMS-C Specific
• Never
• Service Center
5. Broadcast
1.Receive
• Disable
• Enable
2.Channel List
• All Channels
• Index
3.Language
• All
Menus
46
• English
• Français
8.
Memory Status
3. Games
(See page 76)
• Get Games
• My Games
• MidnightBowling
• Midnight Poker
• Midnight Pool
4. Tools
1.
(See page 78)
Alarm
• Wake-up Call
• Alarm1
• Alarm2
• Auto Power
2.
Calendar
1. Month View
2. Week View
3. Day View
4. Schedule
5. Anniversary
6. Miscellaneous
7. Missed Alarm Events
3.
Task
4.
Note
5.
Organizer
1. Calculator
2. Converter
1.Currency
2.Length
3.Weight
4.Volume
5.Area
6.Temperature
3. Timer
4. Stopwatch
Menus
47
5. World Time
5. Rogers Mall
1.
(See page 87)
Get Music & Tones
2.
Get Games
3.
Get Graphics
4.
Get Email/Chat
5.
Get TV/Video
6.
Get Celebrity Voicemail
7.
Get News & Info
8.
Search
6. Media
(See page 91)
1.
Camera
2.
MP3 Player
3.
Record Audio
4.
Voice Command
7. File Manager
1.
(See page 107)
Ring Tunes
1. Get Ring Tunes
2. Downloaded Ring Tunes
3. Voice List
4. Favorite Ring Tunes
5. Default Ring Tunes
6. Memory Card*
2.
Graphics
1. Get Graphics
2. Downloaded Graphics
3. Photos
4. Favorite Graphics
5. Default Wallpapers
6. Memory Card*
3.
Video
1. Get Video
2. Downloaded Video
*. appears only when memory card is inserted
Menus
48
3. My Video
4. Favorite Video
5. Memory Card*
4.
Music
1. Get Music
2. My Music
3. Memory Card*
5.
Other Files
1. Other Files
2. Memory Card*
6.
Memory Card*
7.
Memory Status
1. File Manager
2. Games
3. Tools
8. Contacts
(See page 116)
1.
Contact List
2.
Add New Contact
1. Phone
2. SIM
3.
Group
4.
Speed Dial
5.
My Name Card
6.
Own Number
1. Voice Line 1
2. Voice Line 2
3. Data
4. Fax
7.
Management
1. Default Saving
• Phone
• SIM
• Ask on Saving
2. Copy All to Phone
3. Delete All
• All
• Phone
Menus
49
• SIM
• SIM(FDN)
4. Memory Status
8.
Service Number
9. Settings
1.
(See page 127)
Time & Date
• Set Time
• AM/PM
• AM
• PM
• Time Format
• 12 Hours
• 24 Hours
• Set Date
• Date Format
• DD/MM/YYYY
• YYYY/MM/DD
• MM/DD/YYYY
• Starting Day of Calendar
• Start with Sunday
• Start with Monday
• Auto Update
2.
Phone Settings
1. Language
• Automatic
• English
• Français
2. Greeting Message
3. Slide Settings
• Up
• Accept Call
• None
• Down
• Stop Operation
• Continue Operation
4. Shortcut
5. Extra Settings
Menus
50
• Auto Redial
• Anykey Answer
3.
Display Settings
1. Wallpaper
1.Get Graphics
2.Downloaded Graphics
3.Photos
4.Favorite Graphics
5.Default Wallpapers
2. Info Display
• Text Mode
• Outline
• Shadow
• Normal
• Text Color
• White
• Orange
• Yellow
• Blue
• Green
• Violet
• Red
• Black
• Graphic Logo
• On
• Off
3. Skin
• Pattern 1
• Pattern 2
• Pattern 3
4. LCD Brightness
5. Backlight
• LCD On
• 15 sec.
• 30 sec.
• 1 min.
• 3 min.
• 10 min.
• LCD Dim
Menus
51
• 15 sec.
• 30 sec.
• 1 min.
• 3 min.
• Off
6. Dialing Display
1.Font Size
• Large
• Medium
• Small
2.Font Color
• Basic
• Rainbow
3.Background Color
7. Idle Screen Setting
• Clock 1
• Clock 2
• Clock 3
• Clock 4
• Clock 5
• Clock 6
• Calendar
• Text Clock
4.
Sound Settings
1. Incoming Call
• Get Ring Tunes
• Ring Tunes
• Volume
• Alert Type
• Melody
• Vibration
• Vibration then Melody
• Vibration and Melody
2. Keypad Tone
• Keytone
• Xylophone
• DTMF
• Beep
• Drum
Menus
52
• Rain Drop
• Voice
• Off
• Volume
3. Message Tone
1.Text Message
• Tone
• Mode
• Tone
• Vibration
• Off
• Repetition
• Once
• Every 2 Min.
2.Multimedia Message (Same Options As Text Message)
3.Broadcast (Same Options As Text Message)
4. Power On/Off
• Off
• Tone 1
• Tone 2
5. Slide Tone
• Off
• Tone 1
• Tone 2
6. Quiet Mode
• Vibration All
• Silent All
7. Extra Tones
• Error Tone
• Minute Minder
• Connection Tone
• Alerts On Call
5.
Network Services
1. Call Forwarding
1.Forward Always
1.Voice Calls
2.Data Calls
2.Busy
1.Voice Calls
Menus
53
2.Data Calls
3.No Reply
1.Voice Calls
2.Data Calls
4.Unreachable
1.Voice Calls
2.Data Calls
5.Cancel All
2. Call Barring
1.All Outgoing
1.Voice Calls
2.Data Calls
2.International
1.Voice Calls
2.Data Calls
3.International Except to Home
1.Voice Calls
2.Data Calls
4.All Receiving
1.Voice Calls
2.Data Calls
5.Receiving While Abroad
1.Voice Calls
2.Data Calls
6.Cancel All
7.Change Barring Password
3. Call Waiting
1.Voice Calls
• Activate
• Deactivate
2.Data Calls
• Activate
• Deactivate
3.Cancel All
4. Network Selection
• Automatic
• Manual
5. Caller ID
• Default
Menus
54
• Hide Number
• Send Number
6. Closed User Group
6.
Bluetooth
1. Turn Bluetooth On/Off
2. My Devices
3. My Phone’s Visibility
• Off
• On
4. My Phone’s Name
5. Secure Mode
• Off
• On
6. Bluetooth Services
1.Headset
2.Handsfree
3.Serial Port
4.Dial up
5.File Transfer
6.Object Push
7.
Security
1. PIN Check
• Disable
• Enable
2. Change PIN
3. Phone Lock
• Disable
• Enable
4. Change Password
5. Privacy
• Phone Privacy
• My Messages
• Graphics
• Video
• Music
• Audio
• Contacts
• Call History
6. SIM Lock
Menus
55
• Disable
• Enable
7. FDN Mode
• Disable
• Enable
8. Change PIN2
8.
9.
Connection Settings
•
GoRogers
•
Rogers Media
•
Rogers Internet
Voice Command Settings
1. Choice lists
• Automatic
• Always On
• Always Off
2. Sensitivity
• Reject More
• Recommended
• Reject Less
3. Digit dialing
1.Adapt Digits
2.Reset Digits
4. Sound
1.Prompts
• On
• Off
2.Digits
• On
• Off
3.Names
• On
• Off
4.Name settings
1.Speed
• Faster
• Recommended
• Slower
2.Volume
• Louder
Menus
56
• Recommended
• Softer
5.Speakerphone
• Always On
• Always Off
5. About
0.
Reset Settings
• All
• Phone Settings
• Display Settings
• Sound Settings
Menus
57
Call History
In this menu, you can:
♦view calls you missed, received or dialed
♦view the length of calls made and received
Note: You can access the most recent numbers in the three types of call records by
pressing the
key in Idle mode.
All Calls
This menu (Menu 1.1) lets you view the last 90 numbers you dialed,
received or missed. Use the navigation key to scroll through the list,
and press the
key to view call details.
The number is displayed along with the time and date when the call
was made.
By pressing the Options soft key, you can:
♦view call details.
♦call the number back or send a message. You can also dial the
number by pressing the
key.
♦save the number to your Contact list.
♦send a message to the number.
♦delete the call from the list.
Missed Calls
This menu (Menu 1.2)lets you view the last 30 numbers of the calls
you received, but did not answer. Use the navigation key to scroll
through the list, and press the
key to view call details.
The number is displayed along with the time and date when the call
was made.
By pressing the Options soft key, you can:
♦view call details.
Call History
58
♦call the number back or send a message. You can also dial the
number by pressing the
key.
♦save the number to your Contact list.
♦send a message to the number.
♦delete the call from the list.
Calls Made
This menu (Menu 1.3) lets you view the last 30 numbers you dialed.
Use the navigation key to scroll through the list, and press the
key to view call details.
The number is displayed along with the time and date when the call
was made.
By pressing the Options soft key, you can:
♦view call details.
♦call the number back or send a message. You can also dial the
number by pressing the
key.
♦save the number to your Contact list.
♦send a message to the number.
♦delete the call from the list.
Calls Received
This menu (Menu 1.4) lets you view the last 30 numbers you dialed,
received or missed. Use the navigation key to scroll through the list,
and press the
key to view call details.
The number is displayed along with the time and date when the call
was made.
By pressing the Options soft key, you can:
♦view call details.
♦call the number back or send a message. You can also dial the
number by pressing the
key.
♦save the number to your Contact list.
♦send a message to the number.
♦delete the call from the list.
Call History
59
Delete All
This menu (Menu 1.5) allows you to delete all of the records in each
call record type. You can also delete all of your call records at one
time.
To
Press the
select a call record type
to delete
Up or Down key to highlight the desired call
record type. To delete all of your call
records, select All Calls.
add or remove a check
mark
delete the marked
records
key.
Delete soft key.
When a confirming message displays, press the Yes soft key to
confirm.
Call Time
This menu (Menu 1.6) lets you view the timers for calls you made
and received.
Note: The actual time invoiced for calls by your service provider may vary, depending on
network features, rounding-off for billing purposes and so on.
The following timers are available:
♦Last Call Time: length of the last call.
♦Total Sent: total length of all calls you made since the timer was
last reset.
♦Total Received: total length of all calls you received since the timer
was last reset.
To reset the timers
1. Press Menu 1.6 for Call Time.
Call History
60
2. Press the Reset soft key.
3. Enter the phone password and then press the OK soft key.
Note: The password is preset to “00000000” at the factory. To change this password, see
“Change Password” on page 144.
Call History
61
Messages
You can send and receive a range of different message types from
your mobile phone, including:
♦Instant Messaging allows you to send and receive instant
messages over a variety of different IM clients.
♦Create New Message allows you to compose and send text and
multimedia messages to other phones able to receive the
messages.
♦Voice Mail allows you to access your voice mailbox and check for
voice messages.
Instant Messaging
Instant Messaging (IM) (Menu 2.1) is a way of sending short, simple
messages that are delivered immediately to users online at that
moment.
Before using this feature, you need to subscribe to a messenger
service. For further details, contact your service provider.
Starting your Instant Messaging
1. Press Menu 2.1 for Instant Messaging.
Note: If this is your first time using Instant Messaging, scroll to the desired IM service
that you are subscribed to and press the Select soft key.
2. Highlight Sign In, and press the Select soft key.
3. Enter the required sign on information such as ID and password
and press the OK soft key.
Note: The information required for sign on will vary depending on the instant messaging
provider you are using.
Messages
62
4. Follow the on-screen instructions to read, reply to, compose,
send, and manage your IM account.
Create New Message
Use the Create New Message option (Menu 2.2)to compose new text
and multimedia messages:
♦Text Message allows you to send text messages (SMS) to another
text messaging-capable phone.
♦Multimedia Message can be sent to another multimedia message
(MMS) capable phone or an email address. Multimedia messages
can contain text, photos, videos and voice attachments.
Creating a Text Message
1. Press Menu 2.2.1 for Text Message.
2. Create your message.
For further details about entering characters, see “Entering Text”
on page 30.
3. When you finish entering your message, press the Options soft
key and select Send Message, or press the
key.
4. Enter the destination number in the To: text box.
To add another destination, select an empty slot and add the
additional destination
Note: Press Options to add destinations from your Recent Recipients, Contacts or
Group.
5. When you have finished entering the destinations, press the
Options soft key, highlight the Send option and press the Select
soft key.
Messages
63
Your phone sends the text message. After sending, the message
is saved in the Sent folder.
Text Message Options
While you are composing your text message, press the Options soft
key to select from the following:
♦Send Message: allows you to send the message.
♦Insert: allows you to insert one of the following:
● Text Templates allows you to apply one of the preset message
templates to the text. Select one of the 10 items stored in the
Text messages template menu.
● Contacts allows you to add names and phone numbers to your
message from your Contact list.
● Favorites allows you to add Internet addresses to your
message.
♦Add Media: allows you to add a picture, animation, or melody to
your message.
♦Attach: allows you to attach a Name Card, Schedule, Anniversary,
Miscellaneous, or Task items to your message.
♦Save Message to: save the message to your Drafts folder.
♦Language Select: allows you to set the language to English or
Français.
♦Text Style: allows you to format the style of the text.
● For the Text Size, Large, Normal, and Small size are available.
● Text Mode options are Normal, Underline, and Strikethrough.
● The options for Bold and Italic are set by using the key to place
a checkmark by them.
♦Input Method: allows you to set select the desired combination of
lettercase (uppercase, lower case or mixed case) and the input
method (alphanumeric, T9, numeric or symbols.
Press the Back soft key to exit the Options screen.
Messages
64
Creating a Long Text Message
When you write a text message, the phone automatically splits it into
several messages if the message exceeds the maximum number of
characters allowed in a single message. The number of split
messages to be sent is shown each time your message is split.
Depending on your service provider, the maximum number of
characters may vary.
Creating and Sending a Multimedia Message
1. Press Menu 2.2.2 for Multimedia Message. The media types
screen is displayed.
2. Add the message content by selecting the following media types:
♦Subject: allows you to enter text for the subject. When
finished, press
to return to the media type screen. While
entering the subject text, the following Options are available:
• Save: saves the subject text, returning you to the media
type screen.
• Insert: allows you to insert Text templates to apply a
preset message template, Contacts to add names and
phone numbers from your Contact list, or Favorites.
• Save to: save the message to your Drafts folder.
• Language Select: allows you to set the language to
English or Français.
•Input Method: allows you to set select the desired
combination of lettercase (uppercase, lower case or mixed
case) and the input method (alphanumeric, T9, numeric or
symbols.
♦Graphics & Video: to take a picture or add an existing picture
or video from your Graphics or Video folders.
♦Audio: allows you to add a sound file. You can record a new
audio clip or add an existing audio clip, or select one of sound
clips stored in the Downloaded or Favorite audio folders.
Messages
65
♦Message: enter the message text and press the key. When
finished, press
to return to the media type screen. While
entering the message text, the following options are available:
• Save: saves the message text, returning you to the media
type screen.
• Insert: allows you to insert Text templates to apply a
preset message template, Contacts to add names and
phone numbers from your Contact list, or Favorites to add
Internet addresses.
• Save to: save the message to your Drafts folder.
• Language select: allows you to set the language to
English or Français.
•Input Method: allows you to set select the desired
combination of lettercase (uppercase, lower case or mixed
case) and the input method (alphanumeric, T9, numeric or
symbols.
3. After you have created the message, press the Options soft key
and select Send.
Multimedia Message Options
While you are composing your multimedia message, press the
Options soft key to select from the following:
♦Edit: allows you to edit the highlighted Subject or message text.
♦Preview: shows the message you created.
♦Send: allows you to send the message.
♦Add Graphics/Video/Audio: allows you to add the selected object
to your message.
♦Save to: save the message to your Drafts My folder or Templates
folder.
♦Settings: allows you to modify your message send options.
♦Add/Edit/Delete Page: allows you to add another page to the
message, edit the current page or remove the current page.
Messages
66
♦Attach: allows you to attach a Name card, Schedule, Anniversary,
Miscellaneous, To do or Other files to your message.
♦Remove subject/media/sound/message: allows you to remove the
selected object from your message.
My Messages
The My Messages screen (Menu 2.3) provides the following
message folders:
♦Inbox: stores incoming text and multimedia messages
♦Sent: stores the messages your phone has successfully sent.
♦Outbox: stores the messages and emails your phone is attempting
to send temporarily.
♦Drafts: stores the messages and emails you have saved without
sending or tried to send.
♦My Folders: stores messages that you have moved to the My
folder.
Viewing a Message in your Inbox
1. In Idle mode, press Menu 2.3.1. The message list opens. The
icons on the left of the number indicates the message type
♦
♦
♦
: indicates a text message
: indicates multimedia message
indicates a push message
The icons on the right of the message subject indicate the
memory location and the lock status.
2. To view a message in the list, highlight it and press
.
For a Multimedia message, the display presents the message and
then switches to the message view screen.
3. Press the Up or Down key to scroll through the message screen.
For a Multimedia message, press the Left or Right key to scroll to
other pages, if the message has more than one page.
Messages
67
You can access the message options by pressing the Options soft
key. For more information, see below.
4. Press the
message.
or
key to scroll to the previous or next
5. When you have finished, press the
key.
Using Message Options
While viewing a message, press the Options soft key to access the
following options:
Options for Text Messages
♦Reply: allows you to reply to the message received via a Text
Message.
♦Call Back: allows you to dial the number that the message has
listed.
♦Forward: allows you to forward the message to another
destination.
♦Delete: deletes the currently selected message.
♦Move to Phone/SIM: allows you to move the message to the
Phone or SIM card’s memory.
♦Extract Address: allows you to extract the recipient or sender’s
number or address, and URL from the message text so that you
can make a call, send a SMS or multimedia message, or save them
in your phone’s Contact list.
♦Save Media/Attach: allows you to move the attachment to a
specific folder.
♦Protection: allows you to set the protection for the message.
Options for Multimedia Messages
♦Reply: allows you to reply to the message received via either a Text
Message or a Multimedia Message.
♦Reply All: allows you to reply to all addresses listed in the recipient
list.
♦Call Back: allows you to dial the number from which the message
was originated.
Messages
68
♦Forward: allows you to forward the message to another
destination. You may Add Subject or simply Send.
♦Delete: deletes the message.
♦Extract Address: allows you to extract the recipient or sender’s
number or address, and URL from the message text so that you
can make a call, send a SMS or multimedia message, or save them
in your phone’s Contact list.
♦Save Contents: allows you to save the picture, video clip, or audio
clip from the message received.
♦Properties: shows you information about the message.
Templates
Using this menu (Menu 2.4), you can preset the messages that you
use most frequently.
Select the message template you want and press the Options soft
key.
The following options are available:
♦Edit: allows you to edit the currently-highlighted message. For
further details about entering characters, see “Entering Text” on
page 30.
♦Send Message: allows you to compose a message with the
template already inserted into the body of the message. Once you
have completed your message, you can send, save and send, or
simply save it. For further details about how to send a message,
see page 63.
♦Delete: allows you to delete the message. You are asked to
confirm the deletion by pressing the Yes soft key.
♦Add New allows you to create a new template message.
Voice Mail
This menu (Menu 2.5) allows you to access your voice mailbox, if
your network supports this service.
The following options are available:
♦Connect to Voice Mail: before using the Voice Mail feature, you
must have a valid voice server number configured in your phone.
Messages
69
Your service provider may have configured the number for you
already or you have to enter the voice server number obtained from
your service provider; see Menu 2.5.1. You can then select this
option and press the OK soft key to listen to your messages. You
can quickly connect to the voice server by pressing and holding the
1 key in Idle mode.
♦Voice Server Number: allows you to change the voice mail server
number, if necessary.
1. Select the voice server that you wish to change and press the OK
soft key.
2. Press the Edit soft key.
3. To change the voice server number:
To
enter the server number
correct a digit
move the cursor to the left or
right without clearing a digit
Press the
corresponding numeric keys.
.
Left or Right key.
Note: Voice mail is a network feature. Please contact your service provider for further
details.
Delete All
This menu (Menu 2.6) allows you to delete all of the text messages
in each message box. You can also delete all of your messages at one
time.
1. In Idle mode, press the Menu 2.6 for Delete All.
Messages
70
2. Select the type of messages for which you want to delete.
To
select a message box
place or remove a check
mark
delete the marked
messages
Press the
Up or Down key. To delete all of your
messages, select All messages.
key.
Delete soft key.
3. When a confirming message displays, press the Yes soft key to
confirm.
Settings
You can set up various options for using text and multimedia
messaging services (Menu 2.7).
Instant Messaging
The following IM settings options are available:
Choose your community
This setting sets the default IM community that your phone uses.
Your choices are MSN Messenger or Yahoo!
Profile settings
This setting sets the default profile used for online access. Your
choices are GoRogers, Rogers Media, or Rogers Internet. For more
information, see “Connection settings” on page 142.
Messages
71
Community settings
This menu allows you to adjust your IM client’s behavior. Please note
that the menu options change slightly, depending on your IM
community. You can adjust the following settings:
♦Sounds: adjusts how your phone indicates a Receive Message,
Contact Alert or System Message. You can select:
● Melody
● Vibration
● Silent
♦Sort: arranges your IM contacts by Alphabet or Status.
♦Auto Sign In: enables or disables auto-sign on.
Text Message
The following Text Message (SMS) settings options are available:
Send Settings
♦Reply Path: allows the recipient of your message to send you a
reply message using your message center, if your network
supports this service.
♦Delivery Report: when this option is enabled, the network informs
you whether or not your message has been delivered.
♦Bearer Selection: select the bearer to be used for each type of
network address accessed: GSM or GPRS preferred.
Current Profile
The Current profile menu allows you to select which profile will be
used for text messaging. Highlight the profile you wish to use and
press the Select soft key.
Text Message Profile
The Text Message Profile settings menu allows you to modify the
settings for each profile. Highlight the profile you wish to modify and
press the Edit soft key:
Messages
72
♦Service Center: allows the recipient of your message to send you
a reply through your message center, if your network supports this
service.
♦Default Destination: allows you to set a destination address for
any replies to your text message.
♦Default Type: set the default type to one of Text, Fax, Email or
Paging.
♦Default Validity: you can select the length of time your messages
are stored in the message center after they are sent. The actual
expiry date is determined by your service provider's configuration.
♦Setting Name: you can provide a custom name for your profile.
When you are finished editing your Profile setting, press the Save
Multimedia Message
The following options are available:
Send Settings
♦Delivery Report: when this option is enabled, the network informs
you whether or not your message has been delivered.
♦Read Reply: when this option is enabled, your phone sends a
request for a reply along with your message to the recipient.
♦Priority: you can select the priority level of your messages.
♦Expiry Date: you can select the length of time your messages are
stored in the message center after they are sent. The actual expiry
date is determined by your service provider's configuration.
♦Delivery Time: you can set a time delay before the phone sends
your messages.
Retrieve Settings
♦Anonymous Reject: you can set your phone to automatically reject
or receive anonymous messages.
♦ADS allowed: you can set your phone to automatically reject or
receive advertising messages.
♦Information allowed: you can set your phone to automatically
reject or receive information messages.
Messages
73
♦Report Allowed: when this option is enabled, the sender of an
incoming message receives a delivery report from the network.
♦Auto Download: when this option is enabled, your phone will
automatically download received multimedia messages.
Profile
This setting sets the default profile used for MMS access. Your
choices are GoRogers, Rogers Media or Rogers Internet. For more
information, see “Connection settings” on page 142.
Push Message
The following options are available:
♦Receive: allows you to enable or disable the reception of push
messages. Choose between Always, SMS-C Specific and Never.
♦Service Center: allows the recipient of your message to send you
a reply through your message center, if your network supports this
service.
Broadcast
Broadcast messages are transmitted to all handsets within the area.
The following options are available:
♦Receive: allows you to enable or disable the reception of
broadcast messages.
♦Channel List: allows you to indicate the channels from which you
wish to receive broadcast messages. Press
to check/uncheck
a channel. Press the Options soft key to Save, Add Channels,
Delete or Edit the marked channels.
♦Language: allows you to select your preferred language in which
to display cell broadcast messages. Please contact your service
provider for further details.
Memory Status
You can check the memory amount available and remaining for
storing the messages.
Messages
74
1. From the Idle menu, select Menu 2.8 for Memory Status.
2. The screen displays the amount of memory being used by your
text messages. Press the left and right soft keys to view the
memory usage of multimedia, broadcast and push messages.
3. When you have finished, press the
key.
Samsung PC Studio 3
Your phone comes with Samsung’s PC Studio 3 software, which
allows you to transfer text and multimedia messages, as well as
email between your phone and a computer. For more information on
Samsung PC Studio 3, consult the online help provided with PC
Studio 3.
Messages
75
Games
You can play games already stored on your phone.
Get Games
This option allows you to download games from your service
provider. Follow the online instructions shown on your display
screen. Once you have downloaded games, they are added to your
phone’s list of games.
My Games
This option displays all the games stored on your phone.
To start a game
1. In Idle mode, press the Menu soft key to access the menu.
2. Highlight Games and press the Select soft key or the
3. Highlight My Games and press the
key.
key.
4. Scroll to the game you want and press the
key.
5. The game’s welcome screen displays information about the
game.
While you are playing a
game, to
adjust the sound volume
exit the game
highlight an option in a list
Games
76
Press the
Volume key
.
key.
Navigation keys.
While you are playing a
game, to
select an option
Press the
key.
Viewing Game Information
1. In Idle mode, select Menu 3 for Games.
2. Highlight My Games and press the
key.
3. Scroll to the game you want, press the Options soft key and
select Properties.
The display shows information about the game, such as the Size,
Version, Vendor and website.
4. To exit and return to the Options screen, press the Back soft key.
Deleting Games
1. From your list of games, scroll to the game you want to delete
and press the Options soft key.
2. Scroll to Delete and press the
key.
3. Confirm that you want to delete the game by pressing the Delete
soft key.
Games
77
Tools
Tools enable you to:
♦set an alarm so that the phone rings at a specific time, such as to
remind you of an appointment.
♦view the calendar and organize your schedule.
♦use the phone as a calculator for basic mathematical equations or
currency exchange operations.
♦use a timer or stopwatch.
♦view times in different parts of the world.
Alarm
In Idle mode, press Menu 4.1 to start the Alarm feature. This feature
allows you to:
♦set the alarm to ring at a specific time.
♦set the phone to switch on automatically and ring the alarm even if
the phone is switched off.
The following options are available:
♦Wake-up Call: this alarm type repeats daily on a specified range of
days in the week.
♦Alarm1/2: this alarm type occurs only once or repeats daily.
♦Auto Power: when this option is set to On, the alarm rings at the
specified time, even if the phone is switched off. If the menu option
is set to Off and the phone is switched off at the specified time, the
alarm does not ring.
To set an alarm or Wake-up call:
1. Choose the type of alarm to be set and press the Select soft key.
2. Turn the Alarm On or Off by pressing the Left or Right navigation
keys.
3. Press the Down navigation key to select Alarm Time. Use the
numeric keys to enter the time for the alarm to sound.
Tools
78
Your phone is preset to use 12-hour format. To change the
format, see “Time & Date” on page 127.
4. Press the Down navigation key to select AM/PM, if necessary.
Select AM or PM for 12-hour format by pressing the Left or Right
navigation keys.
5. Press the Down navigation key to highlight Repeat. Select the
alarm frequency by pressing the Left or Right navigation keys.
6. Press the Down navigation key to select Alarm Tone. Press
to display the available audio folders. See “File Manager” on
page 107 for further information about the different audio folders.
7. When you are finished, press the Save soft key.
Note: To stop the Wake-up call when it rings, slide the phone open and press the Confirm
or Snooze soft key.
Tools
79
Calendar
With the Calendar feature (Menu 4.2), you can:
♦consult the calendar to check your memos.
♦write memos to keep track of your schedule.
♦set an alarm to act as a reminder.
Consulting the Calendar
You can view the Calendar in one of the following ways:
♦Month View: a monthly calendar is displayed, the calendar appears
with today’s date highlighted.
♦Week View: displays all of your week’s appointments in hourly
blocks.
♦Day View: displays all the scheduled events for a given date.
♦Schedule: displays all your scheduled events.
♦Anniversary: displays all your Anniversary events.
♦Miscellaneous: displays all your Miscellaneous events.
♦Missed Alarm Events: displays all of your missed alarm events.
Depending on your current view, some of the following options are
available when you press the Options soft key:
♦View Mode: changes how the calendar is displayed between
Month View, Week View or Day View.
♦Create: allows you to create the following types of calendar
entries. See “Writing a Calendar Entry” on page 81 for further
information:
● Schedule: Indicates an event at a specific time and place.
● Anniversary: Indicates a special occasion.
● Miscellaneous: Indicates other unspecified events.
♦Go to: allows you to go to a specific date: Today or Date.
♦Delete: allows you to delete entries according to the following
criteria: Selected, Periods, This Month, This Week, This Day, or
All.
Tools
80
Writing a Calendar Entry
You can create up to 300 calendar entries. To write or edit a calendar
entry on a specific date:
1. Select a timeslot on the current view (month, week or day), using
the Navigation keys and press the
key.
Note: If you are on the Monthly view, you can skip to the previous or next month by
pressing the Volume keys on the left side of the phone.
2. Press the Options soft key and select Create. Choose the type of
entry: Schedule, Anniversary, or Miscellaneous.
3. Enter the entry information. Press the Down navigation key to
select each option.
Note: Depending on the type of entry, not all options will be available.
♦Subject/Occasion: Enter text describing the event. See “Entering
Text” on page 30 for further information.
♦Details: Enter additional information, if required.
♦Start Date: Enter the start date. Use the numeric keys to enter the
numbers for dates and times.
♦Start Time: Enter the start time.
♦AM/PM: Selects the time period for the Start Time.
♦End Date/Due Date: Enter the end date for the event or due date for
the task.
♦End Time: Enter the end time.
♦AM/PM: Selects the time period for the End Time.
♦Location: Enter text describing the location.
♦Alarm: Press the
key to enable or disable the alarm. If enabled,
you can select the warning period Before and the Alarm Tone as
well as the time prior to the event. Press the
key to select a
Tools
81
different alarm tone. See “Sound Settings” on page 133 for further
information about alarm tones.
♦Repeat: Press the
key to enable or disable the repeat.
Depending on the type of entry, you can configure the repeat period
by pressing the Left or Right navigation key.
♦Until: Enter the date when the entry is no longer repeated.
4. Press the Save soft key to save the calendar entry.
The corners of the date on the calendar change to indicate that a
calendar entry exists for that date.
Viewing a Calendar Entry
When you select a day for which a calendar entry already exists, the
latest entry for the day displays.
If more than one entry is stored, press the Up or Down navigation
key to scroll to the previous or next entry. You can use the following
options by pressing the Options soft key:
♦View: allows you to view the highlighted entry details.
♦Create: allows you to create a new entry for the highlighted date.
♦Send via: allows you to send the highlighted entry in Text or
Multimedia message or to a compatible Bluetooth device.
♦View Mode: changes how the calendar is displayed: Month View,
Day View or Week View.
♦Delete: allows you to delete entries according to one of the listed
criteria.
Missed Alarm Events
The Missed Alarm Events shows all the calendar entries that you
have missed. If more than one entry is stored, press the Up or Down
navigation key to scroll to the previous or next entry. You can use the
following options by pressing the Options soft key:
♦View: allows you to view the highlighted entry details.
Tools
82
♦Delete: allows you to delete either the Selected missed alarm
event or All the missed alarm events.
Task
You can use the Task function to in the same way you would use a todo list. When the task has been completed, you can check it off as
done.
To enter tasks, follow these steps:
1. In Idle mode, press Menu 4.3 to start the Task feature
2. The first time you enter the task menu, it will be empty. Press the
Options soft key and select Create. Press the Select soft key or
the
key.
3. In the Task text box, enter your task. It can be up to 100
characters long.
4. Press the Down Navigation key and highlight the Start Date
option. If you want to have a start date, press the
key to
check the box then use the Down key to highlight the Start date
text box. Enter the start date.
5. Scroll down and repeat step 4 for the End Date date.
6. Scroll down and highlight Select Priority. Use the Left or Right
Navigation keys to select High, Normal, or Low.
7. Press the Save soft key.
To see your Task list, you can go to the Task menu or you can see
each task under Day view of the calendar for the day it was started.
To mark a task as Done:
1. Select the task in the task list.
2. Press the Options soft key and highlight Done. Press the Select
soft key or the
key.
Tools
83
3. The task will have a check mark after it in the Task list.
Note
You can use the Note function to in the same way you would use a todo list.
To enter notes, follow these steps:
1. In Idle mode, press Menu 4.4 to start the Note feature
2. The first time you enter the task menu, it will be empty. Press the
Options soft key and select Create. Press the Select soft key or
the
key.
3. In the Note text box, enter your task. It can be up to 100
characters long.
4. Press the Save soft key.
Organizer
The Organizer menu (Menu 4.5) contains your calculator, unit
converter, timer, stopwatch and world time.
Calculator
With this feature (Menu 4.5.1), you can use the phone as a
calculator. The calculator provides basic arithmetic functions:
addition, subtraction, multiplication and division.
1. Enter the first number using the numeric keys.
♦To delete mistakes or clear the display, press the
key.
♦To include a decimal point or a bracket, press the left soft key
until the symbol you want displays.
2. Use the navigation key to select the operations that you want:
+ (addition), - (subtraction), X (multiplication), ÷ (division).
Tools
84
3. Enter the second number.
4. To view the result, press the
key.
5. Repeat steps 1 to 4 as many times as required.
Converter
Using the Converter application (Menu 4.5.2), you can easily
determine many unit conversions (length, weight, volume, area,
temperature) as well as currency conversions.
1. Select the conversion type and press the Select soft key:
♦Currency
♦Length
♦Weight
♦Volume
♦Area
♦Temperature
2. Press the Left or Right navigation key to select the original unit
type (From) and press Down to select the next field.
If you selected Currency, you can view the exchange rates by
pressing the Options soft key and selecting Currency rates.
3. Enter the amount to convert. Use the
Press Down to select the next field.
key to insert a decimal.
4. Press the Left or Right navigation key to select the new unit type
(To) and press Down to select the next field.
The converted value is displayed.
5. Press the Back soft key to calculate a new value.
Tools
85
Timer
The Timer application (Menu 4.5.3) allows you to create a digital
countdown.
To start the timer:
1. Press the Set soft key.
2. Using the numeric keys, enter the amount of time that you wish
to countdown from and press the OK soft key. Press the
key
to start timer.
3. Press the
key to stop or restart timer.
Stopwatch
The Stopwatch application (Menu 4.5.4) allows you to use your
phone as a stop watch.
1. Press the
key to start the stopwatch. You can take up to four
laptimes by pressing the
key.
2. Press the Reset soft key to erase all stop watch times recorded.
World Time
The World Time (Menu 4.5.5) allows you to view the time of day or
night in any part of the world.
1. Use the navigation keys to scroll through different time zones. For
each time zone, a major city is displayed.
2. You can choose the following options by pressing the Options
soft key:
♦Save: Change the home time zone in the display.
♦Set Daylight Saving Time: Select daylight saving time for the
displayed time zone.
Tools
86
Rogers Mall
The Rogers Mall menu (Menu 5) provides a convenient place to
download all your ringtunes, games and graphics. In addition, you
can view photos that you have put online and surf the Internet.
Get Music & Tones
This menu (Menu 5.1) allows you to download music and ring tunes
from your service provider. Follow the online instructions shown on
your display screen.
Once you have downloaded ring tunes, they are added to your
phone’s list of ring tunes. See “Ring Tunes” on page 107.
Get Games
This menu (Menu 5.2) allows you to download games from your
service provider. Follow the online instructions shown on your
display screen. Once you have downloaded games, they are added to
your phone’s list of games.
Note: Game services may not be available depending upon your service provider.
Get Graphics
This menu (Menu 5.3) allows you to download new wallpapers from
your service provider. Follow the online instructions shown on your
display screen. Once you have downloaded graphics, they are added
to your phone’s list of wallpapers.
Get Email/Chat
This menu (Menu 5.4) allows you to view email and instant
messages using a web-based client. Follow the online instructions
shown on your display screen.
Rogers Mall
87
Get TV/Video
This menu (Menu 5.5) allows you to download new video clips from
your service provider. Follow the online instructions shown on your
display screen. Once you have downloaded the video clips, they are
added to your phone’s list of videos.
Get Celebrity Voicemail
This menu (Menu 5.6) allows you to download new audio clips from
your service provider that feature celebrity voices. Follow the online
instructions shown on your display screen. Once you have
downloaded the audio clips, they are added to your phone’s list of
audio clips.
Get News & Info
This menu (Menu 5.7) takes you to an online homepage provided by
your service provider providing news and information links. Selecting
this menu connects the phone to the network and loads the search
page of your service provider.
Search
This menu (Menu 5.8) takes you to an online search engine provided
by your service provider. arch page of your service provider.
Rogers Mall
88
Navigating the Internet Browser
To
Press the
scroll through and select
browser items
Up or Down navigation key until the
item is highlighted, and then press the
key to confirm the selection.
return to the previous
page
key.
press the Menu soft key and select
return to the startup
homepage
Home.
to exit the browser
press the
key
Entering Text in the Internet Browser
When you are prompted to enter text, the current text input mode is
indicated on the screen. See “Entering Text” on page 30 for
information.
Selecting and Using Browser Menu Options
Various menu options are available when you are using the Internet
Browser to navigate the Wireless Web.
To access a browser option:
1. Press the Menu soft key. A menu list displays.
2. Highlight a menu by pressing the Up or Down navigation key.
3. Select an option by pressing the Select soft key.
Rogers Mall
89
4. If necessary, select a secondary option using the Up and Down
navigation keys, and press the Select soft key to confirm.
The following options are available:
♦Favorites: shows the bookmarks list. You can bookmark the
current page or access previously bookmarked pages.
♦Reload: reloads the current page.
♦Home: takes you back at any time to the homepage of the Wireless
Web service provider.
♦Go to URL: allows you to manually enter the URL address of a WAP
site. After entering an address, press the OK soft key to go there
directly.
♦Show URL: displays the URL address of the page to which you are
currently connected. It also enables you to set the current site as
the startup homepage.
♦Clear Cache: deletes the information stored in the cache. The
cache stores the most recently accessed pages.
♦Inbox: stores incoming text, multimedia, broadcast and browser
messages.
♦Show Images: shows the image on the current page. Press the
Next soft key to view the next images.
♦Certificates: shows the security information when you access the
Wireless Web with the secured Internet setting activated.
♦Text Message: allows you to send a text message.
Rogers Mall
90
Media
The Multimedia menu (Menu 6) provides access to the following
features:
♦take pictures and video clips using the Camera.
♦play music with the MP3 player.
♦record audio clips.
♦use the hands-free Voice Command feature.
Camera
Using the camera menu (Menu 6.1) in your phone, you can take
photos of people or events while on the move. Additionally, you can
send photos to other people in a multimedia message or set one as a
wallpaper.
You can also record videos using your phone as a video camcorder.
The video clip can be send to other video multimedia message
capable phones.
Caution: Do not take photos of people without their permission. Do not take photos in a
place where cameras are not allowed or where you might interfere with another person’s
privacy.
Take a photo
This menu allows you to take a photo. Your camera produces JPEG
photos.
Taking a Photo with the Slide Open
1. Press Menu 6.1 to start the camera. The image to be captured
appears on the display.
2. Adjust the image by aiming the camera at the subject.
Media
91
3. Apply the desired effects and options using either the left soft key
or the keypad shortcuts (see “Using the Camera Options” on
page 92).
4. Press the
key to take the photo.
♦To discard the photo and return to the capture mode, press the
Options soft key and select Delete.
♦To return to the capture mode, press the Preview soft key.
Using the Camera Options
In Capture mode, you can use various options by pressing the left
soft key.
To
Press the
scroll to an option
Up or Down key.
select the highlighted
option
Select soft key or the Right
key.
return to Capture mode
Back soft key.
The following options are available:
♦Record Video: switches your phone to Video mode.
♦Shooting Mode: allows you to switch camera modes.
● Single Shot: the default for the camera
● Multi Shot: allows you to take a series of action stills. Select the
the number of photos the camera will take and the capture
speed, High or Normal.
● Mosaic Shot: allows you to take a series of photos successively
and arrange them in a grid. Select the number of photos in the
grid and whether the camera automatically takes the pictures or
whether each picture is taken manually.
♦Effects: allows you to change the color tone or apply special
effects to the photo.
Media
92
♦Frames: allows you to use a decorated frame. Select a frame from
the list using the Navigation keys and press the View soft key. If
you wish to keep the selected frame press the Select soft key. To
return to the list, press the Back soft key.
♦Timer: allows you to have a delay time before the camera takes the
photo. Select the length of time you want. When you press the
Camera key, the camera takes the photo after a specified time.
♦Go to Photos: allows you to view photos stored in your photo
album.
♦Settings: allows you to change the options for taking a photo.
● Size: allows you to select a photo size. Once you change this
setting, it is saved for future shots.
● Quality: allows you to select the photo quality. Once you change
this setting, it is saved for future shots.
● Viewfinder: allows you to change between Full Screen and
Actual Screen display on your LCD screen.
● Shutter Sound: allows you to change your camera’s shutter
sound.
● Zoom Sound: allows you to change whether your camera makes
a noise when you zoom in or out.
● Brightness Sound: allows you to change whether your camera
makes a noise when you change the Brightness level.
♦Camera Shortcuts: shows an illustration of the key commands
used in Camera mode. Use the Next or Previous soft key to move
through the illustrations.
Options after taking your photo
When you press the Options soft key after saving a photo, the
following options are available:
♦Send via: allows you to send the photo using a Multimedia
message or to a compatible Bluetooth enabled device.
♦Send to Online Album: sends the photo to your online album.
♦Take Another allows you to take another photo immediately.
♦Set as:
Media
93
•Wallpaper: allows you to set the photo as your wallpaper for the
idle screen.
•Caller ID: allows you to set the photo as a caller ID image for
Contact list entries.
♦Delete: deletes the photo.
♦Rename: allows you to change the name of the photo.
♦Go to photos: views the photo album in the handset.
♦Share for Bluetooth: allows other Bluetooth-enabled devices
within range to download copies of your picture.
♦Protection: prevents a photo in your photo album from being
accidentally deleted. You must unprotect a photo before it can be
deleted.
♦Properties: shows the properties of the photo, such as the Name,
Time, Format, Resolution, Size, Quality and Protection status.
Recording Video
Your camera is also capable of recording video.
1. Press Menu 6.1 to start the camera.
2. Press the left softkey and select Record Video.
3. Apply the desired effects and options
4. Press the
key to start the video.
5. When you are finished, press the
key to stop the video.
The video clip is saved in the Video folder.
Using the Video Options
In Record mode, you can use various options for the camera by
pressing the left soft key. The following options are available:
♦Take Photo: switches your phone to Camera mode.
♦Effects: allows you to change the color tone or apply special
effects to the video.
Media
94
♦Timer: allows you to set a time delay before the camera starts
recording a video. Select the length of delay you want. When you
press the key. The camera begins recording a video after the
specified time.
♦Go to Video: allows you to go to the Video menu. For more options
information, see “Video Clips” on page 91.
♦Settings: allows you to change the image settings.
● Recording Mode: allows you to set the maximum size of your
video. Choose either Limit for Message (290K) or Normal (1M).
● Size: allows you to set the image size to either (176x144) or
(128x96). The icon for the selected image size displays on the
capture screen.
● Viewfinder: allows you to set the screen display. Choose from
Full Screen or Actual Screen.
● Audio Record: allows you to turn the audio On or Off.
● Zoom Sound: allows you to change whether your camera makes
a noise when you zoom in or out.
● Brightness Sound: allows you to change whether your camera
makes a noise when you change the Brightness level.
♦Video shortcuts: shows an illustration of the key commands used
in Video mode. Use the Next or Previous soft key to move through
the illustrations.
Options after taking your video
When you press the Options soft key after saving a video, the
following options are available:
♦Send via: allows you to send the video using a Multimedia
message or to a compatible Bluetooth enabled device.
♦Send to Online Album: sends the video to your online album.
♦Record Another allows you to record another video immediately.
♦Delete: deletes the video.
♦Rename: allows you to change the name of the video.
♦Go to video: views the video album in the handset.
Media
95
♦Share for Bluetooth: allows other Bluetooth-enabled devices
within range to download copies of your video.
♦Protection: prevents a video in your video album from being
accidentally deleted. You must unprotect a video before it can be
deleted.
♦Properties: shows the properties of the video, such as Name,
Time, Format, Size, Resolution and Protection.
MP3 Player
The MP3 Player (Menu 6.2) can be used to play music you have
either downloaded or loaded from your PC.
Note: The MP3 Player can only play MP3 files recorded at 192 kbps or less. You can set
an MP3 file with a maximum length of 600 kbytes as your Ring tune or Caller ID.
Note: The following music formats are compatible with your MP3 player: MPEG4 AAC
(unprotected), and MP3.
Note: The following characters cannot be used in the filename: / \ * ? “ < > : | 9 .
The file name is limited to 60 total characters).
Adding songs to your phone
Before you can play songs on your phone, you must load songs from
your computer on to the phone’s internal memory or onto a microSD
card. You can add songs via a Bluetooth connection, a microSD card
reader or via the USB cable provided with your phone. For more
information, see “Transferring Files between your Phone and PC” on
page 35.
Creating your playlist
To play music, you must first create a playlist:
Media
96
1. Press Menu 6.2 to start the MP3 player.
2. Press the Options soft key and select Add Music From to add
music from your Phone or Memory card.
3. Using the navigation keys, scroll through the folders and/or list of
music. Press
to check or uncheck individual songs, or check
All to select all songs.
4. When you are finished selecting songs, press the Add soft key.
The songs are added to your playlist.
Using Playlists
Playlists are organized groups of songs. Your playlist can contain up
to 30 songs. Press the Options soft key to access the following
options:
♦Play: allows you to listen to the currently highlighted song.
♦Add Music From: allows you to add music from your Phone or
Memory Card.
♦Change Order: adjusts the order of songs in your playlist.
♦Remove: removes either Selected or All MP3s from your current
playlist. This does not delete the music file.
♦Properties: allows you to view MP3 name, date, format, bitrate,
length, size, and protection.
Using the MP3 player
Once you have created a playlist, you can use the MP3 Player to play
music:
1. Press Menu 6.2 to start the MP3 Player.
Media
97
2. You can use the navigation keys to control the player:
Press Up to open the playlist menu.
Press Left to skip to
the previous song in
the playlist.
Press Right to skip
to the next song in
the playlist.
Press Down to stop the MP3 player.
♦Press
to play or pause the current song.
♦Use the side volume key to change the song volume.
MP3 Player Options
Press the Options soft key to access the following options:
♦Play/Pause: allows you to listen/pause to the currently highlighted
song from your playlist.
♦Open Playlist: allows you to view your playlist.
♦Remove From Playlist: removes the selected MP3 from your
current playlist.
♦Settings: allows you to set these settings; Repeat Mode, Shuffle,
Visualization, Backlight, and Volume.
♦Properties: allows you to view MP3 name, date, format, bitrate,
length, size, and protection.
Record Audio
You can record audio clips (Menu 6.3). After recording, you can send
the audio clip to other people using Multimedia Messaging.
To record an audio clip
1. Press Menu 6.3.
Media
98
2. To start recording, press the Options soft key followed by Record
or press the
key.
3. Record a memo by speaking into the microphone. You can pause
and re-start by pressing the
key.
4. When you are finished, press the Stop soft key. By default, the
audio clip is stored in your Recorded Audio.
5. Press the Options soft key, and select one of the following
display:
♦Play: plays back your audio clip.
♦Record: enables you to record another audio clip.
♦Go to Voice List: goes to your list of stored clips for playback.
♦Send via: allows you to send the audio clip using a multimedia
message or a compatible Bluetooth enabled device.
♦Delete: allows you to delete the audio clip.
♦Rename: allows you to change the name of the video.
♦Protection: prevents an audio clip from being accidentally
deleted. You must unprotect an audio clip before it can be
deleted.
♦Properties: shows the properties of the audio clip, such as
Name, Date, Format, Length, Size, and Protection.
Voice List
This menu shows all your audio clips. Scroll to an audio clip and
press the Options soft key. The following options are available:
♦Play: plays back your audio clip.
♦Send via: allows you to send the audio clip using multimedia
message, email or to a compatible Bluetooth enabled device.
♦Delete: allows you to delete either the selected audio clip or all the
audio clips.
♦Rename: allows you to change the name of the audio clip.
♦Move to: moves the audio clip from your phone’s memory to the
Favorite sounds folder or the memory card.
Media
99
♦Copy to Memory Card: makes a copy of the audio clip to the
memory card.
♦Share for Bluetooth: allows the audio clip to be shared or released
for the use of another Bluetooth device.
♦Protection: prevents an audio clip from being accidentally deleted.
You must unprotect an audio clip before it can be deleted.
♦Properties: shows the properties of the audio clip, such as Name,
Date, Format, Length, Size, and Protection.
Voice Command
The Voice Command menu (Menu 6.4) allows you to control your
phone hands-free, using simple voice commands.
The following is a list of functions that you can perform using Voice
Command speech recognition on your phone.
♦Call <Name or #>: dial by saying either a Name or a number in
your Contact list
♦ Send text <Name>: send a text message to any name in your
Contact list.
♦ Lookup <Name>: open the contact record for any name in your
Contact list.
♦Go to <App>: open any application installed on your device.
Calling a Name or Number
Use the Call command to place a call. If the number you want to call
is stored in your contact list, you can say the contact name and,
optionally, which number (Home, Office, Mobile, Fax or Other) you
want to call. If the number is not in your contact list, you can say the
number itself.
To call a name or number:
1. Start Voice Command (Menu 6.4). You hear “Say a command.”
2. Say “Call” followed by the name of a person in your contact list,
and optionally, the number location (Home, Office, Mobile, Fax or
Other) to call, or…
Media
100
♦Say “Call” followed by a valid telephone number, or…
♦Say “Call” by itself to be prompted for a name or number.
Examples:
Call Angela Martinez
Call Tom Stewart at Office
Call Donna Harper's Mobile
Call 781-555-5200
3. After you say a name or number, you might be prompted “Did you
say Call?” followed by the first of up to three names or numbers.
4. To confirm a name or number, wait for the beep and then say
“Yes.”
5. You can also choose the correct name or number from the choice
list by pressing the number next to the preferred choice, or by
selecting it using the phone's navigation keys. For information on
turning off choice lists, or customizing their behavior, see the
appendix, “Voice Command Settings.”
6. If the phone recognizes a name that has more than one stored
number, it might prompt you “Which number?” Say the label for
the number you want, for example “Office,” “Home,” or “Mobile.”
Hints for Using Call
♦Wait for the beep before saying the command.
♦When saying a name, speak clearly and say the name of a person
in your contact list, first name followed by last name.
♦When saying a telephone number, pronounce each digit clearly and
distinctly but do not pause between the digits. Voice Command
recognizes the digits one, two, three, four, five, six, seven, eight,
nine, zero, and “oh.” It does not recognize expressions such as
“one eight hundred.” Instead, say “one eight zero zero.”
♦If Voice Command doesn't recognize numbers correctly, try
adapting digit dialing to your voice. To adapt digit dialing, choose
Media
101
Digit Dialing’s Adapt Digits from the Voice Command Settings
menu.
Send Text
Sending a Message
Use the Send Text command to send a text message to a specified
name in your contact list or a specified number.
To Send A Message
1. Start Voice Command (Menu 6.4). You hear “Say a command.”
2. Say “Send Text” or…
Say “Send Text” followed by a name or number
You can say…
Send Text (To be prompted to say the name or number)
Send Text to Kevin Harper
Send Text Angela Martinez at home
Send Text to 781 970-5200
3. If you did not specify a name or number, Voice Command
prompts you “Say the name or number.” Say a name in your
contact list, or say a valid telephone number.
4. After you say a name or number, you might be prompted, “Did
you say?” To confirm a name or number, wait for the beep and
then say “Yes.”
You can also choose the correct name or number from the choice
list using the phone's navigation keys.
Looking Up a Contact
Use the Lookup command to look up contact information for any
person stored in your contact list.
Media
102
1. Start Voice Command (Menu 6.4). You hear “Say a command.”
2. Say “Lookup” followed by the name of a person in your contact
list.
Examples:
Lookup Angela Martinez
Lookup Tom Stewart
3. After you say a name, you might be prompted “Did you say
Lookup?” followed by the first of up to three names. To confirm a
name, wait for the beep and then say “Yes.” You can also choose
the correct item from the choice list using the phone's navigation
keys.
Opening an Application
Use the “Go To” command to open an application or access a menu
on your phone.
1. Start Voice Command (Menu 6.4). You hear “Say a command.”
2. Say “Go To” or…
Say “Go To” followed by the application you want to open or…
Say “Go To” followed by a menu item.
Examples:
Go To (To see a list of applications you can open)
Go To Calendar
Media
103
Hints for using Go To
Wait for the beep before saying the command.
♦To see a list of applications/menu items you can open, say “Go To”
but do not specify a destination. Voice Command displays a list of
valid destinations and prompts you with “Please Choose.” You can
then say the name of the application you want to open.
♦If the list is too long to fit on one screen, the screen will contain the
choice “Next Menu.” You can say one of the application or menu
names on the list, or say “Next Menu” to view the next screen
Voice Command settings
You can adjust the following Voice Command options by pressing the
Settings soft key and selecting one of the following submenus:
Choice lists
If Voice Command is not absolutely confident that it has correctly
identified a name or number, it can display a choice list of up to three
possibilities, and prompt you to confirm the correct one.
You can control when choice lists appear by changing the Choice
Lists setting to:
♦Automatic: Voice Command displays a choice list when it is not
confident it has identified the correct choice from among multiple
alternatives.
♦Always On: When there are multiple alternatives, Voice Command
always displays a choice list.
♦Always Off: Voice Command never displays a choice list. Instead,
the application picks the best from among the possible choices.
Sensitivity
In Voice Command, “sensitivity” controls the balance between
rejecting too much, which means the phone frequently does not
recognize names, numbers, or commands, and rejecting too little,
which means it frequently recognizes something even if nothing was
said.
Media
104
When Voice Command rejects an utterance, it displays a message
such as “Please repeat…” or “No match found.” If you frequently
experience these messages, you might be able to get better
recognition by adjusting the Sensitivity setting toward Reject Less.
If you frequently experience false activations (Voice Command
detects a wrong match), you might be able to get better performance
by adjusting the Sensitivity setting toward Reject More.
Digit dialing
Use the Digit dialing menu to adapt digit dialing to your voice.
♦Adapt digits: Lets you adapt digits, which can improve Voice
Command of phone numbers. Adaptation takes about 60 seconds.
♦Reset digits: Erases any digit adaptation you have done and resets
digit recognition to the factory default. If you have not adapted
digits, this option is grayed out.
Sound
You can customize the Voice Command user interface by turning
playback on or off for prompts, names, and numbers. You can also
change the speed and volume of name playback.
♦Prompts: Turns playback on or off for prompts such as “Please say
a command.”
♦Digits: Turns playback on or off for digits, for example, when
confirming a phone number.
♦Names: Turns playback on or off for names.
♦Names settings: Adjusts the speed and volume of name playback.
♦Speakerphone: Controls whether the speakerphone is always on
or off when Voice Command is started.
About
Displays the software version.
Media
105
Samsung PC Studio
Your phone comes with Samsung’s PC Studio 3 software, which
allows you to transfer pictures, videos and songs between your
phone and a computer. For more information on Samsung PC Studio
3, consult the online help provided with PC Studio 3.
Media
106
File Manager
The File Manager menu (Menu 7) is used to manage your collection
of ring tunes, graphics, downloaded video, and other files.
Ring Tunes
In this menu (Menu 7.1), you can select a new ringtone from your
collection of pre-provided and downloaded ring tunes. In addition,
you can play your recorded audio clips.
Get Ring Tunes
This menu allows you to download Ring Tunes from your service
provider. Follow the online instructions shown on your display
screen. Once you have downloaded ring tunes, they are added to
your phone’s list of ring tunes.
Downloaded Ring Tunes
This menu allows you to select audio clips that you have downloaded
from your service provider and play them, assign them as your ringer
or alarm tone, or to save them to your memory card. For more
information, see “Ring Tunes Options” on page 108.
Voice List
The Voice list contains your recorded audio clips. For more
information, see “Ring Tunes Options” on page 108.
Favorite Ring Tunes
This menu allows you to select audio clips that you have moved to
your Favorite Ring Tunes folder. For more information, see “Ring
Tunes Options” on page 108.
File Manager
107
Default Ring Tunes
The Default Ring Tunes menu contains all the standard ringtones that
come with your phone. Scroll to a desired ringtune and press the
Select softkey. Press Yes to confirm.
Memory Card
You can check the contents of your Ring Tunes folder. Press the
Options soft key for the following options:
♦Create folder: allows you to create a new folder.
♦Memory card info: lists the Memory card capacity, used space,
and free space.
Note: The Memory card option will only appear if a micro SD memory card has been
inserted in your phone.
Ring Tunes Options
Highlight an item and press the Options soft key. From the
Downloaded Ring Tunes, Voice List or Favorite Ring Tunes menus,
the following options are available:
Note: Not all options are available from every menu.
♦Play: plays the sound.
♦Send via: allows you to send the sound via Multimedia message or
Bluetooth.
♦Set as: allows you to set the sound as your ring tune, Caller ring
tune or Alarm tone.
♦Delete: allows you to delete the sound or delete all sounds.
♦Rename: allows you to change the name of the sound.
♦Move to: allows you to move the sound to your Favorite Ring
Tunes folder or your memory card.
♦Copy to Memory Card: allows you to copy the sound to your
memory card.
File Manager
108
♦Share for Bluetooth: allows the sound to be shared or released for
the use of another Bluetooth device.
♦Protection: allows you to lock the sound to protect it from
deletion.
♦Properties: displays information about the sound, such as Name,
Date, Format, Size, and Protection.
Graphics
In this menu (Menu 7.2), you can select a new wallpaper image from
your collection of pre-provided and downloaded pictures. In addition,
you can send the images to other phones.
Get Graphics
Using the Get Graphics option, you can access your Service
Provider’s site where you can download new images.
Downloaded Graphics
This menu allows you to access your downloaded images.
Scroll to the image you want to view. For more information, see
“Graphics Options” on page 110.
Photos
In this menu you can review the photos you’ve taken. For more
information, see “Graphics Options” on page 110.
Favorite Graphics
This menu allows you to select images that you have moved to your
Favorite Graphics folder. For more information, see “Graphics
Options” on page 110.
Default Wallpapers
The Default Wallpapers menu contains all the standard wallpapers
that come with your phone. Scroll to a desired ringtune and press the
Options softkey and select Select. Press Yes to confirm.
File Manager
109
Memory Card
You can check the contents of your Graphics folder. Press the
Options soft key for the following options:
♦Create folder: allows you to create a new folder.
♦Memory card info: lists the Memory card capacity, used space,
and free space.
Note: The Memory card option will only appear if a micro SD memory card has been
inserted in your phone.
Graphics Options
Highlight an item and press the Options soft key. From the
Downloaded Graphics, Photos or Favorite Graphics menus, the
following options are available:
♦View: displays the image.
♦Send via: allows you to send the image via Multimedia message or
Bluetooth.
♦Set as: allows you to set the image as Wallpaper or as a Caller ID.
♦Delete: allows you to delete the image.
♦Rename: allows you to change the name of the item.
♦Move to: allows you to move the image to the Favorite Graphics
folder or the memory card.
♦Copy to Memory Card: allows you to copy the item to the memory
card.
♦Slide Show: shows the images in a slide show. Choose 1 second,
or 3 seconds.
♦Share for Bluetooth: allows the image to be shared or released for
the use of another Bluetooth device.
♦Protection: allows you to lock the image to protect it from
deletion.
♦Properties: displays information about the image, such as Name,
Date, Format, Resolution, Quality, Size, and Protection.
File Manager
110
Video
In this menu (Menu 7.3), you can view videos downloaded from the
web server or received in multimedia messages. The following
options are available:
Get Video
Using the Get Video option, you can access your Service Provider’s
site where you can download new videos.
Downloaded Video
This menu allows you to access your downloaded video clips. For
more information, see “Video Options” on page 112.
My Video
In this menu you can review the videos you’ve taken. For more
information, see “Video Options” on page 112.
Favorite Video
This menu allows you to select videos that you have moved to your
Favorite Video folder. For more information, see “Video Options” on
page 112.
Memory Card
You can check the contents of your Video folder. Press the Options
soft key for the following options:
♦Create folder: allows you to create a new folder.
♦Memory card info: lists the Memory card capacity, used space,
and free space.
Note: The Memory card option will only appear if a micro SD memory card has been
inserted in your phone.
File Manager
111
Video Options
Highlight an item and press the Options soft key. From the
Downloaded Video, My Video or Favorite Video menus, the following
options are available:
♦Play: plays the video.
♦Send via: allows you to send the video via Multimedia message or
Bluetooth.
♦Delete: allows you to delete the video.
♦Rename: allows you to change the name of the video.
♦Move to: allows you to move the video to the Favorite Video folder
or memory card.
♦Copy to Memory Card: allows you to copy the video to the memory
card.
♦Share for Bluetooth: allows the video to be shared or released for
the use of another Bluetooth device.
♦Protection: allows you to lock the video to protect it from deletion.
♦Properties: displays information about the video, such as Name,
Date, Format, Resolution, Size, and Protection.
Music
In this menu (Menu 7.4), you can view songs downloaded from the
Rogers MusicStore or copied from your computer onto your memory
card.
Get Music
This menu allows you to download Music from your service provider.
Follow the online instructions shown on your display screen. Once
you have downloaded the music, they are added to your phone’s list
of songs. See “Music” on page 112.
My Music
This options allows you to access your songs stored on your phone
in your Music list. Press the Options soft key to select one of the
following options:
File Manager
112
♦Play: plays the currently-highlighted song.
♦Send via Bluetooth: allows you to send the song via Bluetooth.
♦Add to Playlist: adds the currently-highlighted song to your play
list. For more information, see “Creating your playlist” on page 96.
♦Set as: allows you to set the song as your Ringtone, Caller
ringtone or Alarm tone.
♦Delete: allows you to delete the song.
♦Rename: allows you to change the name of the song.
♦Move to Memory Card: allows you to move the song to the micro
SD memory card.
♦Copy to Memory card: allows you to copy the song to the micro
SD memory card.
♦Share for Bluetooth: allows the song to be shared or released for
the use of another Bluetooth device.
♦Protection: allows you to lock the song to protect it from deletion.
♦Properties: displays information about the song, such as Name,
Date, Format, BitRate, Size, Length, and Protection.
Memory Card
You can check the contents of your Music folder. Press the Options
soft key for the following options:
♦Create folder: allows you to create a new folder.
♦Memory Card info: lists the Memory card capacity, used space,
and free space.
Note: The Memory card option will only appear if a micro SD memory card has been
inserted in your phone.
Other Files
This option (Menu 7.5) allows you to view other types of files that
you have stored on your phone. This includes Excel spreadsheets,
text files, wmf files, PowerPoint presentations, PDFs, HTML, JPEGs,
GIFs, BMPs, and Word documents. You can send these files by
File Manager
113
picture message or Bluetooth. You can also move or copy the files to
your memory card.
Memory Card
You can check the contents of your Other Files folder. Press the
Options soft key for the following options:
♦Create folder: allows you to create a new folder.
♦Memory Card info: lists the Memory card capacity, used space,
and free space.
Note: The Memory card option will only appear if a micro SD memory card has been
inserted in your phone.
Memory Card
You can check the contents of your memory card (Menu 7.6) and see
what has been saved there. Press the Up or Down navigation keys to
scroll between the Sounds, Images, Video, Music, and Other files
folders.
After selecting a folder, press the Options soft key for the following
options:
♦Open: allows you to open the folder so you can access its contents.
♦Create folder: allows you to create a new folder.
♦Properties: lists the folder Name, Date, Format, Size, and
Protection.
♦Memory Card info: lists the Memory card Capacity, Used space,
and Free space.
Note: The Memory card option will only appear if a micro SD memory card has been
inserted in your phone.
For more information on downloading files from your PC to your
Memory card, contact your service provider.
File Manager
114
Memory Status
This menu (Menu 7.7) shows the amount of memory for File
Manager (photographs, video clips and audio clips, etc.), Games,
and Tools. Choose between Phone and any inserted Memory Card.
The display shows you the total, free and used space including the
number of multimedia files you recorded and the total number of
multimedia files you can additionally create.
Samsung PC Studio 3
Your phone comes with Samsung’s PC Studio 3 software, which
allows you to transfer files between your phone and a computer. For
more information on Samsung PC Studio 3, consult the online help
provided with PC Studio 3.
File Manager
115
Contacts
You can store phone numbers and their corresponding names in
both your SIM card and phone’s memory. They are physically
separate but are used as a single entity, called your Contact List
(Menu 8).
Contact List
The Contact List (Menu 8.1) displays all your stored phone numbers
located in both your phone’s memory and your SIM card. While
accessing any Contact List entry, press the Options soft key to
access the options for the entry.
To
view the highlighted
Contact
scroll up or down the
Contact List
call the highlighted
Contact
Press the
key
Up or Down key until the option you want
highlights.
key
When viewing a contact, the following Options are available:
♦Edit: allows you to edit the name and contact information.
♦Send message: allows you to send a text message or Multimedia
message to the currently selected contact.
♦Copy: allows you to copy the selected contact to another location
(phone or SIM card)
♦Send via: allows you to send the contact information as a text
message, multimedia message, or to a compatible Bluetoothenabled device.
Contacts
116
♦Delete: allows you to delete the selected number from the Contact
List. You are asked to confirm that you wish to delete the name and
number by pressing the Yes soft key.
Searching for and Dialing a Number in the
Contact List
After storing numbers in the Contact List, you can search for them in
two ways; by name and by caller group.
Searching for a Number by Name
1. In Idle mode, press the Menu soft key to access the menu.
2. Select Contacts and press the Select soft key or
3. Select Contact List and press the Select soft key or
key.
key.
4. Enter the first few letters of the name that you want to find. The
Contact List entries are listed, starting with the first entry
matching your input.
To
view the highlighted entry
Press the
key.
select a different entry
Up or Down navigation key until the
entry you want highlights.
look for a name starting
with a different letter
key labeled with the letter you want.
key to dial the
5. Once you have found the entry, press the
number, or press the Options soft key to access the Contact List
entry options.
Contacts
117
Add New Contact
There are two ways to store a number:
♦From Idle mode, entering a number and using the Options soft key
and selecting Save to Contacts.
♦From the Contacts menu, using the Add New Contact option
(Menu 8.2).
Storing a Number in Idle Mode
As soon as you start to enter a number, Options appears above the
left soft key to allow you to store the number in the Contact List.
1. Enter the number you want to store.
Note: If you make a mistake while entering a number, correct it using
.
2. When you are sure that it is correct, press the Options soft key.
3. Select Save to Contacts. Select the memory location to store the
new contact, either Phone or SIM.
Note: When you change phones, any numbers stored in your SIM card memory are
automatically available with the new phone, whereas any numbers stored in the phone’s
memory must be reentered or transferred using the optional data kit accessory. However,
contacts stored on the phone may include additional details not available on the SIM
card.
4. Enter a name and press the Save soft key. For further details
about entering characters, see “Entering Text” on page 30.
Storing a Number Using the Contacts Menu
1. In Idle mode, press the Menu soft key to access the menu.
2. Select Contacts and press the Select soft key or the
Contacts
118
key.
3. Scroll to Add new contact by pressing the Up or Down key and
press the Select soft key.
4. Select a memory location, either SIM or Phone, by pressing the
Up or Down key and press the Select soft key. Email address can
only be saved in the phone.
5. Enter a name and press Down.
For further details about entering characters, see “Entering Text”
on page 28.
6. Enter the number you want to store and press the Save soft key
Group
You can organize your contacts into groups such as Family, Office
and Friends. Once contacts are organized into groups, you can send
text and multimedia messages to all members of a group
simultaneously. Additionally, you can assign a unique Picture ID or
ringtone to the group.
From the Group menu (Menu 8.3), press the Options soft key to
access the following options:
♦View: allows you to view the contacts in the group.
♦Add: allows you to add a new group.
♦Edit: allows you to edit the highlighted group. In the Group edit
screen, you can edit the name of the group, as well as the graphics
and ringtones associated with the group.
♦Send Message: allows you to send a text or multimedia message
to the group members.
♦Delete: allows you to delete all the groups or just the highlighted
group.
Adding a contact to the Group
1. In Idle mode, press the Menu soft key to access the menu.
Contacts
119
2. Select Contacts and press the Select soft key or
key.
3. Scroll to Group by pressing the Up or Down navigation key and
press the
key.
4. Highlight the desired group that you wish to add the contact to
and press the
key.
5. Press the Options soft key and select Add. Your Contact List is
displayed.
6. To add a contact to the group, highlight the desired contact and
press
to check/uncheck the contact. Repeat for any
additional contacts that you wish to add.
7. When you have finished, press the Select soft key.
8. When you are finished, press the Back soft key or
to the Idle screen.
key to exit
Creating a new Group
1. In Idle mode, press the Menu soft key to access the menu.
2. Select Contacts and press the Select soft key or
key.
3. Scroll to Group by pressing the Up or Down navigation key and
press the
key.
4. Press the Options soft key and select Add.
5. Enter the name of the new group.
♦To add a custom Picture ID to the group, press Down to Caller
ID and press
.
♦To add a custom ringtone to the group, press Down to
Ringtone and press
.
6. When you are finished, press the Save soft key.
Contacts
120
7. When you are finished, press the Back soft key or
to the Idle screen.
key to exit
Speed Dial
Using Speed Dial (Menu 8.4), you can assign up to eight phone
numbers from Contact List that you use most frequently to the
number keys (2 to 9), and then dial them easily whenever you want,
simply by pressing and holding the associated number key.
Setting up Speed-dial Entries
1. In Idle mode, press the Menu soft key to access the menu.
2. Select Contacts and press the Select soft key or
key.
3. Scroll to Speed Dial by pressing the Up or Down navigation key
and press the Select soft key or the
key.
4. A virtual representation of your keypad appears onscreen.
Existing speed dial entries appear within their associated key.
Using the navigation keys, select a number from the onscreen
keypad to assign the speed dialling number, and press the
Options soft key followed by the Add soft key.
Note: Memory location 1 is reserved for your Voice Mail server number.
5. Select an entry from the list and press the Select soft key.
The virtual keypad reappears with the new speed dial entry
appearing with its associated key.
6. When you are finished, press the
soft key.
To edit the number use the following options by pressing the Options
soft key:
Contacts
121
♦View: allows you to view the number assigned to the key. You
can dial the number by pressing the key.
♦Change: allows you to assign a different number to the key.
♦Remove: allows you to clear the setting so that no number is
assigned to the key.
Using Speed dial
♦In Idle mode, to speed-dial the numbers assigned to the 2 to 9
keys, press and hold the appropriate key.
My Name Card
My Name Card (Menu 8.5) is similar to an entry in the Contact List,
except that it contains your contact information, like a business card.
You can send the name card to others via a text or multimedia
message.
You can assign a name to each of your own phone numbers
registered on your SIM card.
1. In Idle mode, press the Menu soft key to access the menu.
2. Select Contacts and press the Select soft key or
key.
3. Scroll to My Name Card by pressing the Up or Down navigation
key and press the Select soft key or
key.
See “Add New Contact” on page 118 for information about
entering contact information.
Own Number
The Own Number (Menu 8.6) is a memory aid, which you can use to
check your own
phone number if you need to do so. You can assign a name to each of
your own phone numbers registered on your SIM card.
1. In Idle mode, press the Menu soft key to access the menu.
Contacts
122
2. Select Contacts and press the Select soft key or
key.
3. Scroll to Own Number by pressing the Up or Down navigation key
and press the Select soft key or
key.
4. Highlight the number you want to view (Voice Line 1, Voice Line
2, etc.) by pressing the Up or Down navigation key. The number
type is displayed.
Management
The Management menu (Menu 8.7) allows you to select where your
contacts will be saved, copy your SIM contacts to your phone, sort
your contacts, delete your contacts, or check your memory status.
Default Saving
The Default saving option allows you to choose where your contacts
will be saved. The following options are available:
♦Phone: new phonebook contacts will be saved to your phone.
♦SIM: new phonebook contacts will be saved to your SIM card.
♦Ask on Saving: you will be prompted to choose between Phone or
SIM card whenever you save a new contact.
Copy All to Phone
This option allows you to copy all contacts from your SIM card to
your phone. When you copy entries to the phone, duplicate entries
are created in your Phonebook.
1. In Idle mode, press the Menu soft key to access the menu.
2. Select Contacts and press the Select soft key or
key.
3. Highlight Management and press the Select soft key or the
key.
Contacts
123
4. Highlight Copy All to Phone and press the Select soft key or the
key.
5. After receiving the “Copy All to Phone?” confirmation message,
press the Yes soft key.
Note: Options are available for entries stored to your phone that are not available when
stored to the SIM card. For details, see the note on page 118.
Delete All
This option allows you to delete your contacts. You may delete from
All, Phone, or SIM card. To delete entries:
1. In Idle mode, press the Menu soft key to access the menu.
2. Select Contacts and press the Select soft key or
key.
3. Scroll to Management by pressing the Up or Down navigation
key and press the Select soft key or
key.
4. Scroll to Delete All by pressing the Up or Down navigation key
and press the Select soft key or
key.
5. To place a check mark by the memory you want to empty, All,
Phone, SIM or SIM(FDN), press the
key.
You can remove the check mark by pressing the
key again.
6. When you are finished marking, press the Delete soft key to
delete the entries in the selected memory.
7. Enter the phone password and press the OK soft key.
The password is preset to “00000000” at the factory. To change this
password, see “Phone Password” on page 149.
8. When you are finished, press the
Contacts
124
key.
Note: Once contact entries have been deleted, they cannot be recovered.
Memory Status
You can check how many names and numbers are stored in the
Phonebook, in both SIM card and the phone memory. You can also
see the capacity of both memories. Your phone memory can hold up
to 1000 contacts. The number of contacts that can be stored on your
SIM card will vary according to the type of SIM card.
Checking the Memory status
You can check how many names and numbers are stored in the
Contact List, in both the SIM card and phone’s memory. You can also
see the capacity of both memories.
1. In Idle mode, press the Menu soft key. Select Contacts and press
the Select soft key or
key.
2. Scroll to Management by pressing the Up or Down navigation
key and press the Select soft key or
key.
3. Select the Memory Status option by pressing the Up or Down
navigation key and press the Select soft key or
key.
4. When you are finished, press the Back soft key.
Service Number
You can view the list of Service Dialing Numbers (SDN) assigned by
your service provider. These numbers include emergency numbers,
directory enquiries and voice mail numbers.
1. In Idle mode, press the Menu soft key. Select Contacts and press
the Select soft key or
key.
Contacts
125
2. Scroll to Service Number by pressing the Up or Down navigation
key and press the Select soft key or
key.
3. Scroll through the numbers by using the Up or Down navigation
key.
4. To dial the number displayed, press the Dial soft key.
Note: This option is available only when your SIM card supports Service Dialing
Numbers.
Samsung PC Studio
Your phone comes with Samsung’s PC Studio 3 software, which
allows you to transfer Contacts between your phone and a computer.
For more information on Samsung PC Studio 3, consult the online
help provided with PC Studio 3.
Contacts
126
Settings
Many different features of your phone can be customized to suit your
preferences. All of these features are accessed in the Settings menu
(Menu 9).
Time & Date
Use this menu (Menu 9.1) to configure the settings for the time and
date display.
1. In Idle mode, press the Menu soft key to access the menu.
2. Select Settings and press the Select soft key or the
key.
3. Select Time & Date and press the Select soft key or the
key.
4. Select the setting you wish to change. Press the Up or Down
navigation keys to switch between options.
♦Set Time: You can enter the current time. Use the numeric
keypad to type in the time.
♦AM/PM: You can select either AM or PM for the current time, if
the Time Format is set to 12 Hours. Press Left or Right
navigation key to switch between AM and PM.
♦Time Format: You can change the time format to 12 Hours or
24 Hours. Press Left or Right navigation key to switch between
time formats.
♦Set Date: You can enter the month, day, and year. Use the
numeric keypad to type in the time.
♦Date Format: You can change the order that the year, month
and date is displayed in.
♦Starting Day of Calendar: You can have the calendar start on
either Start with Sunday or Start with Monday. Press Left or
Right navigation key to switch between start days.
♦Auto Update: When this option is checked, you can receive
time information from your service provider’s network.
Settings
127
Note: Automatic updates of time and date does not change the time you have set for
alarm settings or calendar memos.
Phone Settings
Use this menu (Menu 9.2) to configure the settings for how the
phone operates.
Language
You can select a display language: Automatic, English, or Français.
Greeting message
This menu allows you to set a greeting to be displayed briefly when
the phone is switched on.
To
Press the
clear the existing
message
key and hold it down until the message
is cleared.
enter a new message
appropriate alphanumeric keys.
change the text input
mode
key.
For further details, see “Entering Text” on page 30.
Slide Settings
Use this menu to set how the phone reacts when you slide it open for
an incoming call, and when you close it while using a function.
♦Up: set whether or not to answer a call by opening the phone.
Settings
128
♦Down: set whether or not the phone keeps the current menu
screen active when you close the phone or whether it returns to
Idle mode.
Shortcut
You can use the Navigation keys as shortcut keys to access specific
menus directly from Idle mode. Use this menu to change these
shortcut assignments.
To assign a shortcut to a key:
1. Highlight the navigation key that you wish to assign a function to.
2. Press the Options softkey and select Change.
3. Select the menu that will be assigned to the key and press the
Select soft key.
Extra Settings
You can turn the automatic redialling or answering features on or off.
To turn a feature
Press the
on
key. A check mark displays in front of the
option.
off
key. The check mark no longer displays.
The following options are available:
♦Auto Redial: when this option is checked, the phone makes up to
ten attempts to redial a phone number after an unsuccessful call.
Note: The interval between two attempts varies.
Settings
129
♦Anykey Answer: when this option is checked, you can answer an
incoming call by pressing any key, except the
key and the
Reject soft key. To reject the call, press the
key or the Reject
soft key. When this option is unchecked, you can only press the
key or Accept soft key.
Display Settings
In this menu (Menu 9.3), you can change various settings for the
display or backlight.
Wallpaper
This menu allows you to change the background image or the color
of the text to be displayed in Idle mode.
The following options are available:
♦Get Graphics: this option takes you to an online page where you
can download wallpapers.
♦Downloaded Graphics: allows you to choose a photo from your
downloaded graphics folder.
♦Photos: allows you to choose a photo from photos folder.
♦Favorite Graphics: allows you to choose a photo from your
favorite graphics folder.
♦Default Wallpapers: allows you to choose from a list of wallpapers
included with your phone.
To change the background image
1. Scroll through the list by pressing the Navigation keys and select
an image.
2. Press the Select soft key or the
key.
3. The image will be saved as your wallpaper.
Settings
130
Info Display
This menu allows you to change the background image or the color
of the text to be displayed in Idle mode.
The following options are available:
♦Text Mode: you can specify the visual style of text on the Idle
screen (Outline, Shadow, or Normal).
♦Text Color: you can select the color of the text to be displayed on
the Idle screen.
♦Graphic Logo: you can select the turn the graphic logo on or off.
Skin
You can select a skin color pattern for Menu mode. To select a skin,
select the pattern using the Up or Down navigation keys and press
the OK soft key.
LCD Brightness
You can adjust the display brightness to see it better in different
lighting conditions.
Press the Left or Right navigation keys or press the Volume keys to
adjust the brightness. To accept the changes, press the OK soft key.
Backlight
You can select the length of time the backlight is on. The backlight
turns on when you press a key or receive a call or message and
remains on for the specified length of time.
Press the Up or Down navigation key to switch between options:
♦LCD On: Press the Left or Right navigation keys to change the time
that the screen remains fully lit.
♦LCD Dim: Press the Left or Right navigation key to change the time
that the screen remains on but not fully lit.
Settings
131
Dialing Display
This menu allows you to select the size or color of your dialing font,
as well as the background color.
To change the size of the font
1. Highlight Font Size and press the Select soft key or the
key.
2. Use the Left or Right navigation key to select Large, Medium or
Small.
3. Press the Save soft key or the
key to save your change.
Otherwise, press
or the Back soft key.
To change the color of the font
1. Highlight Font Color and press the Select soft key or the
key.
2. Use the Left or Right navigation key to select either Basic (black)
or Rainbow.
3. Press the Save soft key or the
key to save your change.
Otherwise, press
or the Back soft key.
To change the background color
1. Highlight Background Color and press the Save soft key or the
key.
2. Use the Left or Right navigation key to select a background color.
3. Press the Save soft key or the
key to save your change.
Otherwise, press
or the Back soft key.
Settings
132
Idle Screen Setting
Use this menu to change the appearance of the view screen when in
Idle Mode. Use the Left or Right navigation keys to select either a
clock or calendar format and press the Save soft key.
Sound Settings
You can use the Sound Settings menu (Menu 9.4) to customize
various settings, such as the:
♦ring melody, volume and type.
♦sounds made when you press a key, receive a message, slide the
phone open/closed or switch your phone on or off.
♦alert tone made every minute during a call, when you make an
error or when your call is connected.
Incoming Call
This menu allows you to select a ring melody for incoming calls. You
can choose between many different melodies. If you have
downloaded additional ring tunes, you can access them in this menu.
Press Up or Down to select an option and press Right or Left to scroll
through the choices. When you are finished, press the Save soft key
or
.
♦Get Ring Tunes: allows you to download new ring tunes from your
online service provider.
♦Ring Tunes: This option allows you to select a ring melody.
Highlight Ring Tune and press the
key. Use the Up or Down
key and select Default Ring Tunes, Downloaded Ring Tunes,
Favorite Ring Tunes or My Music. Then use the
key to select a
ring tune.
♦Volume: This option allows you to adjust the ring volume. Use the
Right or Left navigation key to increase or decrease the volume.
♦Alert Type: This option allows you to specify how you are to be
informed of incoming calls. Use the Right or Left navigation key to
select a ring tone. The following options are available:
Settings
133
●
●
●
●
Melody: the phone rings using the ring melody selected in the
Ringtone menu.
Vibration: the phone vibrates but does not ring.
Vibration then Melody: the phone vibrates 3 times and then
starts ringing.
Vibration and Melody: the phone vibrates and rings
simultaneously.
Keypad Tone
This menu allows you to select the tone that the phone sounds when
you press a key. Press Up or Down to select an option and press
Right or Left to scroll through the choices. When you are finished,
press the Save soft key or
.
♦Keytone: Selects the type of keytone.
♦Volume: This option allows you to adjust the ring volume. Use the
Right or Left navigation key to increase or decrease the volume.
Message Tone
This menu allows you to select how the phone informs you that a
new message has been received. You can select a different type of
tone for different kinds of messages.
For each type of message tone (Text Message, Multimedia Message
or Broadcast), the following options are available:
♦Tone: you can select a message tone: MSG Tone1 to MSG Tone10.
♦Mode: you can select a type of message alert.
● Tone: the phone sounds the selected message tone.
● Vibration: the phone vibrates.
● Off: the phone does not use the message tone.
♦Repetition: you can select how often the phone informs you of a
new message.
● Once: the phone alerts you to a new message just once at the
time of its receipt.
Settings
134
Every 2 Min.: the phone alerts you to a new message every 2
minutes until you open the message.
Press Up or Down to select an option and press Right or Left to scroll
through the choices. When you are finished, press the Save soft key
or
.
●
Power On/Off
This menu allows you to select the melody that the phone sounds
when it is switched on and off. Select either Tone 1 or Tone 2. To turn
the sound off, select Off. When you are finished, press the Select
soft key or
.
Slide Tone
This menu allows you to select the tone that the phone sounds when
you open or close the folder. Select one of the provided tones. To turn
the sound off, select Off. When you are finished, press the Select
soft key or
.
Quiet Mode
This menu allows you to enable or disable vibration when the phone
is in quiet mode. Select either Vibration All or Silent All. When you
are finished, press the Select soft key or
.
Extra Tones
You can customize additional tones used for the phone. Use the
navigation keys to scroll through the list of extra tones and press
to check/uncheck each option. The following options are available:
♦Error Tone: sets whether or not the phone beeps every when an
invalid entry is made.
Settings
135
♦Minute Minder: sets whether or not the phone beeps every minute
during an outgoing call to keep you informed of the length of your
call.
♦Connection Tone: sets whether or not your phone beeps when
your call is connected.
♦Alerts on Call: indicates you have a scheduled alert when you are
on the phone.
When you are finished, press the Save soft key.
Network Services
Use this menu (Menu 9.5) to customize the settings for network
features, such as call forwarding, call barring, and call waiting.
Call Forwarding
Call forwarding enables incoming calls to be rerouted to a number
that you specify. For example, you could divert your business calls to
a colleague while you are on holidays.
You can use the following options to forward voice calls and/or data
calls:
♦Forward Always: all calls are forwarded.
♦Busy: calls are forwarded when you are already on another call.
♦No Reply: calls are forwarded when you do not answer the phone.
♦Unreachable: calls are forwarded when you are not in an area
covered by your service provider.
♦Cancel All: all call forwarding options are canceled.
To set your call forwarding options.:
1. Select a call forwarding option by pressing the Up or Down
navigation key, and then press the Select soft key.
2. Select the type of calls, Voice calls or Data calls, by pressing the
Up or Down navigation key, and then press the Select soft key.
The current status displays. If the option has already been set, the
number to which the calls are diverted displays.
Settings
136
To
Select
activate call forwarding
Activate
deactivate call forwarding
Deactivate
3. In the Forward to field, enter the number to which the calls are to
be diverted and press the Select soft key.
To enter an international code, press the
displays.
key until the + sign
The phone sends your settings to the network and the network’s
acknowledgement displays.
If you selected No reply, move to the Sec line and select the
length of time the network delays before forwarding a call.
You can deactivate all call forwarding settings by selecting the
Cancel all option.
Call Barring
The Call Barring service allows you to restrict different types of calls
from being made or received. For example, you could restrict all
voice calls being made to International phone numbers. For each
option, you can restrict whether to ban voice calls or data calls.
The following call-barring options are available:
♦All Outgoing: bars this phone from making outgoing calls.
♦International: bars this phone from making calls to international
numbers.
♦International Except to Home: bars this phone from making
international calls except to home.
♦All Receiving: Blocks all receiving calls.
♦Receiving While Abroad: blocks all receiving calls when abroad
♦Cancel All: clears your call barring options.
Settings
137
♦Change Barring Password: allows you to change the password
used to set your call barring options.
To set your call barring options:
1. Select the type of calls you want to bar by pressing the Up or
Down navigation key, and then press the Select soft key.
2. Select whether you want to bar Voice Calls or Data Calls, and
then press the Select soft key.
The screen informs you whether call barring is activated or
deactivated.
3. Activate or deactivate the call barring feature as necessary by
selecting either Activate or Deactivate.
4. Enter your phone password. For more details about your phone’s
password, see See “Change Password” on page 144.
♦To return to the previous screen, press the Back soft key.
♦You can also deactivate all call barrings by selecting the Cancel
All option.
Call Waiting
The Call Waiting service informs you when someone is trying to
reach you during another call. You can specify individual call waiting
option for voice calls and/or data calls.
To set your call waiting options:
1. Select the type of calls, voice or data, to which you want to apply
the call waiting option by pressing the Up or Down navigation
key, and then press the Select soft key.
The screen informs you whether call waiting is activated or
deactivated.
Settings
138
2. You can activate or deactivate the call waiting feature as
necessary by selecting either Activate or Deactivate.
To return to the previous screen, press the Back soft key.
You can also deactivate all call waiting settings by selecting the
Cancel All option.
Network Selection
The Network Selection feature enables you to automatically or
manually select the network used when roaming outside of your
home area.
Note: You can select a network other than your home network only if there is a valid
roaming agreement between them.
To change your network selection:
1. In the Network Selection menu, select either Automatic or
Manual and press the OK soft key.
♦If you select Automatic, you are connected to the first available
network when roaming.
♦If you select Manual, the phone scans for the available
networks. Go to step 2.
2. Press the Up or Down navigation keys until the network you want
is highlighted and then press the OK soft key.
You are connected to that network.
Caller ID
You can prevent your phone number from being displayed on the
phone of the person being called.
Note: Some networks do not allow the user to change this setting.
Settings
139
The following options are available:
♦Default: the default setting provided by the network is used.
♦Hide Number: your number does not display on the other person’s
phone.
♦Send Number: your number is sent each time you make a call.
Closed User Group
This network service allows incoming and outgoing calls to be
restricted to a selected user group. You can create up to ten user
groups. For details on how to create and use a closed user group,
contact your service provider.
Bluetooth
Bluetooth (Menu 9.6) is a short-range wireless communications
technology capable of exchanging information over a distance of
about 30 feet without requiring a physical connection.
Unlike infrared, you don't need to line up the devices to beam
information with Bluetooth. If the devices are within a range of one
another, you can exchange information between them, even if they
are located in different rooms.
The following Bluetooth options are available:
Turn Bluetooth On/Off
This option allows you to turn Bluetooth On or Off. Make a selection
and press the Select soft key or the
key.
My Devices
This option allows you to search for new Bluetooth devices. Highlight
Search New Device and press the Select soft key or the
key. The
phone will search for available devices.
Settings
140
My Phone’s Visibility
This option allows you to turn your visibility to On or Off. Make a
selection and press the Select soft key or the
key.
My Phone’s Name
This option shows the name given to your phone for Bluetooth
purposes. You can edit the name if needed.
Secure Mode
Secure mode provides the ability to monitor data stored on the
handset. When Secure mode is set as On, whenever another person
tries to access your phone's data, the phone will always prompt you
to allow access. When Secure mode is set as Off, other people can
access your phone`s data without permission.
This option allows you to set your security modes to On or Off. Make
a selection and press the Select soft key or the
key.
Bluetooth Services
The Bluetooth specification is a protocol that describes how the
short-range wireless technology works, whereas individual profiles
describe the services supported by individual devices. Profiles
reduce the chance that different devices will not work together.
The following Service profiles are available:
♦Headset: The remote Bluetooth headset enables outgoing and
incoming calls.
♦Handsfree: The remote Bluetooth car kit enables outgoing and
incoming calls.
♦Serial Port: The remote Bluetooth device acts as a virtual serial
port.
♦Dial up: The remote Bluetooth device enables Internet access
through a phone modem.
♦File Transfer: The remote Bluetooth device enables users to
transfer files from their handset to others.
♦Object Push: The remote Bluetooth device enables the transfer of
personal data (e.g. vCard, vCalendar, etc.) to other devices.
Settings
141
Searching for and pairing with a Bluetooth device
1. From the Bluetooth setting options, select My Devices.
2. Select Search New Device.
After searching, a list of devices to which you can connect
displays. The color of the icon indicates the status of the device:
♦Grey for unpaired devices
♦Blue for paired devices
♦Red for devices that are currently connected to your phone
3. Select a device.
4. Enter a Bluetooth PIN code and press the OK soft key. This code
is used just once and you don’t need to memorize it. The default
PIN for your phone is 0000. When the owner of the other device
enters the same code, pairing is finished.
Using device options
From the My Devices list, press the Options soft key to access the
following options after you are connected to a device:
♦Connect/Disconnect: connects or disconnects from the other
device (Bluetooth headset only).
♦Browse Files: search for data from the device and import data
directly to your phone.
♦Service List: access the Bluetooth service list of the device.
♦Rename: rename the paired device.
♦Authorize Device/Unauthorize Device: determine if the phone
asks you to permit connection when other devices try to connect to
your phone.
♦Delete: delete the selected device or all devices.
Sending data via Bluetooth
1. Activate the Bluetooth feature.
Settings
142
2. Select the application in which the item you want to send is
stored.
3. Scroll to the item you want and press the Options soft key.
4. Select Send via and select Bluetooth. The phone searches for
devices within range and displays a list of available devices.
5. Select a device.
6. If necessary, enter the Bluetooth PIN code needed for pairing and
press the OK soft key.
Receiving data via Bluetooth
To receive data via Bluetooth, your phone’s Bluetooth feature must be
active. If an unauthorized Bluetooth device sends data to your phone,
the phone displays a confirmation message. To receive data, press
the Yes soft key.
Security
The Security menu (Menu 9.7) enables you to restrict the use of your
phone to others and the types of calls.Various codes and passwords
are used to protect the features of your phone. They are described in
the following sections. Also see “Access Codes” on page 149.
PIN Check
When the PIN check feature is enabled, you must enter your PIN each
time you switch the phone on. Consequently, any person who does
not have your PIN cannot use your phone without your approval.
Note: Before disabling the PIN Check feature, you must enter your PIN.
The following options are available:
Settings
143
♦Disable: the phone connects directly to the network when you
switch it on.
♦Enable: you must enter the PIN each time the phone is switched
on.
Change PIN
This feature allows you to change your current PIN to a new one,
provided that the PIN Check feature is enabled. You must enter the
current PIN before you can specify a new one. Once you have entered
a new PIN, you are asked to confirm it by entering it again.
Phone Lock
When the Phone Lock feature is enabled, the phone is locked and you
must enter an 8-digit phone password each time the phone is
switched on.
The password is preset to “00000000” at the factory. To change the
phone password, see the Change Password menu (Menu 9.7.4)
below.
Once the correct password has been entered, you can use the phone
until you switch it off.
The following options are available:
♦Disable: you are not asked to enter the phone password when you
switch the phone on.
♦Enable: you are required to enter the phone password when you
switch the phone on.
Change Password
The Change Password feature allows you to change your current
phone password to a new one. You must enter the current password
before you can specify a new one.
Settings
144
The password is preset to “00000000” at the factory. Once you have
entered a new password, you are asked to confirm it by entering it
again.
Privacy
Using this menu, your phone’s menus become password-protected,
although you can make calls normally. Contacts, downloaded
content, phone settings and stored messages can all be protected
protected.
To enable phone privacy:
1. Highlight a category, and press
category.
to check/uncheck the
2. When you are finished, press the Save soft key to change your
privacy settings.
Once you have enabled privacy, you must enter the phone password
to access the menus. When the phone asks for the phone password,
enter the password and press the OK soft key.
Note: The password is preset to “00000000” at the factory. To change this password, see
page 144.
SIM Lock
When the SIM lock feature is enabled, your phone only works with
the current SIM card.
♦To enable the SIM lock, you must enter the current SIM lock code.
Once you have entered the SIM lock code, you must confirm by
entering it again.
♦To unlock your SIM card, you must re-enter the SIM lock code.
Settings
145
FDN Mode
FDN (Fixed Dial Number) Mode, if supported by your SIM card,
allows you to restrict your outgoing calls to a limited set of phone
numbers.
The following options are available:
♦Disable: you can call any number.
♦Enable: you can only call phone numbers stored in the FDN
address book. The FDN address book is a separate address book
and is managed separately from the normal Address Book.Address
Book. You must enter your PIN2.
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu does not
display. Furthermore, PIN2 is specific to a SIM card and you will need to ask the issuer of
the SIM card for the PIN2 code.
Change PIN2
The Change PIN2 feature allows you to change your current PIN2 to a
new one. You must enter the current PIN2 before you can specify a
new one. Once you have entered a new PIN2, you are asked to
confirm it by entering it again.
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu does not
display.
Connection Settings
You can customize the profiles (Menu 9.8) containing the settings
for connecting your phone to the network. These settings are used
for the Internet browser, Instant Messaging (IM) and sending
multimedia messages.
Settings
146
Note: Your phone connects to the network by default. If you change the multimedia
settings without first checking with your service provider, the Internet and multimedia
features may not work properly.
Select the profile you want, press the Options soft key, and select
Edit to review or change the current profile or Add new connection
to create an additional profile. For each profile, the following options
are available:
♦Profile Name: enter a name that you wish to assign to the HTTP
proxy server.
♦Home URL: set the address of your startup homepage. When the
default homepage displays, you can delete it using the
key
and enter your own choice.
♦Proxy: Enable or disable the WAP gateway address required to
connect to the Internet.
♦IP Address: enter the WAP gateway address required to connect to
the Internet.
♦Port: enter the Proxy port required to connect to the Internet.
♦DNS: Enable or disable DNS for connection to the Internet.
● DNS1/2: IP address of the DNS server.
♦Bearer: select the bearer to be used for each type of network
address accessed: GPRS or GSM.
♦Advanced settings: The following options are available in the
Advanced setting submenu:
APN: enter the access point name used for the address of the
GPRS network gateway.
•
• Login ID: enter the Login ID required to connect to the GPRS
network.
• Password: enter the password required to connect to the GPRS
network.
Settings
147
Voice Command Settings
You can adjust the settings and preferences for VoiceSignal by
opening the Voice Command settings menu (Menu 9.9). For more
information, see “Voice Command settings” on page 104.
Reset Settings
Using Reset Settings (Menu 9.0) can easily reset your phone to its
default settings. To reset your phone:
1. Select one or more of the following reset options:
♦All: resets all configuration options to their default values.
♦Phone Settings: resets only phone options to their default values.
♦Display Settings: resets only display options to their default
values.
♦Sound Settings: rests only sound options to their default values.
2. Press the Reset soft key.
3. Enter the 8-digit phone password and press the Yes soft key.
Note: The password is preset to “00000000.” To change this password, see page 144.
Settings
148
Access Codes
There are several access codes that are used by your phone and its
SIM card. These codes help you protect the phone against
unauthorized use.
When requested for any of the codes explained below, enter the
appropriate code (displayed as asterisks) and press the OK soft key.
If you make a mistake, press
one or more times until the
incorrect digit is cleared and then continue entering the correct code.
The access codes, except for the PUK and PUK2 codes, can be
changed using the Security menu (Menu 9.7). See page 143 for
further details.
Important! Avoid using access codes resembling emergency numbers, such as 911, so
that you do not accidentally dial an emergency number.
Phone Password
The Phone Lock feature uses the phone password to protect your
phone against unauthorized use. The phone password is supplied
with the phone and is preset to “00000000” at the factory.
To
activate/deactivate the Phone
Lock feature
change the phone password
See
“Phone Lock” on page 144 (Menu
9.7.3).
“Change Password” on page 144
(Menu 9.7.4).
Access Codes
149
PIN
The Personal Identification Number or PIN (4 to 8 digits) protects
your SIM card against unauthorized use. It is usually supplied with
the SIM card.
If you enter an incorrect PIN three times in succession, the code is
disabled and cannot be used until you re-enable it by entering the
PUK (see below).
To
See
activate/deactivate the PIN Check
feature
page 143 (Menu 9.7.1).
change the PIN
page 144 (Menu 9.7.2).
PUK
The 8-digit PUK (PIN Unblocking Key) is required to change a
disabled PIN. The PUK may be supplied with the SIM card. If not, or
you have lost it, contact your service provider.
To re-enable your PIN:
1. Enter the PUK and press the OK soft key.
2. Enter a new PIN of your choice and press the OK soft key.
3. When the Confirm New PIN message displays, enter the same
code again and press the OK soft key.
If you enter an incorrect PUK ten times in succession, the SIM card
becomes invalid. Contact your service provider for a new card.
PIN2
The PIN2 (4 to 8 digits), supplied with some SIM cards, is required to
access specific functions, such as setting the maximum cost of a
call. These functions are available if supported by your SIM card.
Access Codes
150
If you enter an incorrect PIN2 three times in succession, the code is
disabled and you cannot access the functions until you re-enable it
by entering the PUK2.
PUK2
The 8-digit PUK2 (PIN Unblocking Key 2), supplied with some SIM
cards, is required to change a disabled PIN2. If you lose the code,
contact your service provider.
To re-enable your PIN2:
1. Enter the PUK2 and press the OK soft key.
2. Enter a new PIN2 of your choice and press the OK soft key.
3. When the Confirm New PIN2 message displays, enter the same
code again and press the OK soft key.
If you enter an incorrect PUK2 ten times in succession, you will not
be able to access the functions requiring the PIN2. Contact your
service provider for a new card.
Access Codes
151
Solving Problems
If you are experiencing problems with your phone, perform the
following simple checks before contacting a service professional.
This may save you the time and expense of an unnecessary service
call.
When you switch your phone on, the following messages may
appear:
Insert SIM Card
♦Check that the SIM card is correctly installed.
Phone Locked Enter Password
♦The automatic locking function has been enabled. You must enter
the phone’s password before you can use the phone. The factory
preset code is "00000000".
Enter PIN
♦You are using your phone for the first time. You must enter the
Personal Identification Number (PIN) supplied with the SIM card.
♦The PIN Check feature is enabled. Every time the phone is switched
on, the PIN has to be entered. To disable this feature, use the PIN
Check menu (Menu 9.7.1).
Enter PUK
♦The PIN code was entered incorrectly three times in succession
and the phone is now blocked. Enter the PUK supplied by your
service provider. There is a PUK1 and a PUK2 code. Please make
sure you know which one is locked and apply the correct PUK
code.
Solving Problems
152
“No service,” “Network failure” or “Not done”
displays
♦The network connection was lost. You may be in a weak signal area
(in a tunnel or surrounded by buildings). Move and try again.
♦You are trying to access an option for which you have not taken
out a subscription with your service provider. Contact the service
provider for further details.
You have entered a number but it was not dialed
♦Have you pressed the
key?
♦Are you accessing the right cellular network?
♦Is Call Barring turned on? (see “Call Barring” on page 137 for more
details)
Your correspondent cannot reach you
♦Is your phone switched on (the
key pressed for more than one
second)?
♦Are you accessing the right cellular network?
♦Is Call Barring turned on? (see “Call Barring” on page 137 for more
details)
♦Has your phone been call forwarded to another number?
Your correspondent cannot hear you speaking
♦Have you switched off the microphone?
♦Are you holding the phone close enough to your mouth? The
microphone is located at the bottom of the phone.
The phone starts beeping and “**Warning** Low
Battery” flashes on the display
♦Your battery is insufficiently charged. Recharge the battery.
Solving Problems
153
The audio quality of the call is poor
♦Check the signal strength indicator on the display (
); the
number of bars indicates the signal strength from strong (
) to
weak ( ).
♦Try moving the phone slightly or move closer to a window if you
are in a building.
No number is dialed when you recall an Contact list
entry
♦Check that the number has been stored correctly, by using the
Contact list Search feature.
♦Re-store the number, if necessary.
If the above guidelines do not help you to solve the problem,
take note of:
♦the model and serial numbers of your phone
♦your warranty details
♦a clear description of the problem
Then contact your local dealer or Samsung after-sales service.
Solving Problems
154
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Your wireless phone is a radio transmitter and receiver. It is designed
and manufactured not to exceed the emission limits for exposure to
radio frequency (RF) energy set by the Federal Communications
Commission (FCC) of the U.S. Government. These limits are part of
comprehensive guidelines and establish permitted levels of RF
energy for the general population. The guidelines are based on the
safety standards that were developed by independent scientific
organizations through periodic and thorough evaluation of scientific
studies.
The standards include a substantial safety margin designed to assure
the safety of all persons, regardless of age and health.
The exposure standard for wireless phones employs a unit of
measurement known as Specific Absorption Rate (SAR). The SAR
limit recommended by the FCC is 1.6W/kg.*
SAR tests are conducted using standard operating positions
specified by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands. Although the SAR
is determined at the highest certified power level, the actual SAR level
of the phone while operating can be well below the maximum value.
This is because the phone is designed to operate at multiple power
levels so as to use only the power required to reach the network. In
*. In the U.S. and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional
protection for the public and to account for any variations in measurements.
Health and Safety Information
155
general, the closer you are to a wireless base station antenna, the
lower the power output of the phone.
Before a new model phone is available for sale to the public, it must
be tested and certified by the FCC that it does not exceed the limit
established by the government adopted requirement for safe
exposure. The tests are performed in positions and locations (e.g., at
the ear and worn on the body) as required by the FCC for each model.
While there may be differences between the SAR levels of various
phones and at various positions, they all meet the government
requirement.
The FCC has granted an Equipment Authorization for this model
phone with all reported SAR levels evaluated as in compliance with
the FCC RF exposure guidelines. SAR information on this model
phone is on file with the FCC and can be found under the Display
Grant section of http:// www.fcc.gov/oet/fccid after searching on FCC
ID printed in the label on the phone.
For Body Operation
For body worn operation, this model phone has been tested and
meets the FCC RF exposure guidelines when used with a Samsungsupplied or approved accessory designated for this product or when
used with an accessory that contains no metal and that positions the
handset a minimum from the body.
The minimum distance from the body for this model phone is written
in the FCC certification information. Non-compliance with the above
conditions may violate FCC RF exposure guidelines.
For more Information concerning exposure to radio frequency
signals, see the following websites:
♦Federal Communications Commission (FCC)
•http://www.fcc.gov
♦Cellular Telecommunications Industry Association (CTIA):
•http://www.wow-com.com
♦U.S.Food and Drug Administration (FDA)
Health and Safety Information
156
•http://www.fda.gov/cdrh/consumer
♦World Health Organization (WHO)
•http://www.who.int/peh-emf/en
Precautions When Using Batteries
♦Never use any charger or battery that is damaged in any way.
♦Use the battery only for its intended purpose.
♦If you use the phone near the network’s base station, it uses less
power; talk and standby time are greatly affected by the signal
strength on the cellular network and the parameters set by the
network operator.
♦Battery charging time depends on the remaining battery charge,
the type of battery and the charger used. The battery can be
charged and discharged hundreds of times, but it will gradually
wear out. When the operation time (talk time and standby time) is
noticeably shorter than normal, it is time to buy a new battery.
♦If left unused, a fully charged battery will discharge itself over time.
♦Use only Samsung-approved batteries and recharge your battery
only with Samsung-approved chargers. When a charger is not in
use, disconnect it from the power source.
♦Do not leave the battery connected to a charger for more than a
week, since overcharging may shorten its life.
♦Extreme temperatures will affect the charging capacity of your
battery: it may require cooling or warming first.
♦Do not leave the battery in hot or cold places, such as in a car in
summer or winter conditions, as you will reduce the capacity and
lifetime of the battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery may temporarily
not work, even when the battery is fully charged. Li-ion batteries
are particularly affected by temperatures below 0 ° C (32 ° F).
♦Do not short-circuit the battery. Accidental short-circuiting can
occur when a metallic object (coin, clip or pen) causes a direct
connection between the + and terminals of the battery (metal strips
on the battery), for example when you carry a spare battery in a
pocket or bag. Shortcircuiting the terminals may damage the
battery or the object causing the short-circuiting.
Health and Safety Information
157
♦Dispose of used batteries in accordance with local regulations.
Always recycle. Do not dispose of batteries in a fire.
Operating Environment
Remember to follow any special regulations in force in any area and
always switch your phone off whenever it is forbidden to use it, or
when it may cause interference or danger.
When connecting the phone or any accessory to another device, read
its user’s guide for detailed safety instructions. Do not connect
incompatible products.
As with other mobile radio transmitting equipment, users are advised
that for the satisfactory operation of the equipment and for the safety
of personnel, it is recommended that the equipment should only be
used in the normal operating position (held to your ear with the
antenna pointing over your shoulder).
Electronic Devices
Most modern electronic equipment is shielded from radio frequency
(RF) signals. However, certain electronic equipment may not be
shielded against the RF signals from your wireless phone. Consult
the manufacturer to discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a minimum distance of
15 cm (6 inches) be maintained between a wireless phone and a
pacemaker to avoid potential interference with the pacemaker. These
recommendations are consistent with the independent research and
recommendations of Wireless Technology Research.
Persons with pacemakers:
♦should always keep the phone more than 15 cm (6 inches) from
their pacemaker when the phone is switched on.
♦should not carry the phone in a breast pocket.
Health and Safety Information
158
♦should use the ear opposite the pacemaker to minimize potential
interference.
If you have any reason to suspect that interference is taking place,
switch your phone off immediately.
Hearing Aids
Some digital wireless phones may interfere with some hearing aids.
In the event of such interference, you may wish to consult your
hearing aid manufacturer to discuss alternatives.
Other Medical Devices
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is adequately shielded
from external RF energy. Your physician may be able to assist you in
obtaining this information. Switch your phone off in health care
facilities when any regulations posted in these areas instruct you to
do so. Hospitals or health care facilities may be using equipment that
could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately shielded
electronic systems in motor vehicles. Check with the manufacturer or
its representative regarding your vehicle. You should also consult the
manufacturer of any equipment that has been added to your vehicle.
You should also consult the manufacturer of any equipment that has
been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted notices require
you to do so.
Health and Safety Information
159
Potentially Explosive Environments
Switch your phone off when in any area with a potentially explosive
atmosphere and obey all signs and instructions. Sparks in such areas
could cause an explosion or fire resulting in bodily injury or even
death.
Users are advised to switch the phone off while at a refueling point
(service station). Users are reminded of the need to observe
restrictions on the use of radio equipment in fuel depots (fuel storage
and distribution areas), chemical plants or where blasting operations
are in progress.
Areas with a potentially explosive atmosphere are often but not
always clearly marked. They include the areas below deck on boats,
chemical transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust or metal
powders, and any other area where you would normally be advised to
turn off your vehicle engine.
Emergency Calls
This phone, like any wireless phone, operates using radio signals,
wireless and landline networks as well as user-programmed
functions, which cannot guarantee connection in all conditions.
Therefore, you should never rely solely on any wireless phone for
essential communications (medical emergencies, for example).
Remember, to make or receive any calls the phone must be switched
on and in a service area with adequate signal strength. Emergency
calls may not be possible on all wireless phone networks or when
certain network services and/or phone features are in use. Check with
local service providers.
To make an emergency call:
1. If the phone is not on, switch it on.
Health and Safety Information
160
2. Key in the emergency number for your present location (for
example, 911 or other official emergency number). Emergency
numbers vary by location.
3. Press the
key.
If certain features are in use (call barring, for example), you may first
need to deactivate those features before you can make an emergency
call. Consult this document and your local cellular service provider.
When making an emergency call, remember to give all the necessary
information as accurately as possible. Remember that your phone
may be the only means of communication at the scene of an
accident; do not cut off the call until given permission to do so.
Other Important Safety Information
♦Only qualified personnel should service the phone or install the
phone in a vehicle. Faulty installation or service may be dangerous
and may invalidate any warranty applicable to the device.
♦Check regularly that all wireless phone equipment in your vehicle is
mounted and operating properly.
♦Do not store or carry flammable liquids, gases or explosive
materials in the same compartment as the phone, its parts or
accessories.
♦For vehicles equipped with an air bag, remember air bag inflates
with great force. Do not place installed or portable wireless
equipment in the area over the air bag or in the air bag deployment
area. If wireless equipment is improperly installed, and the air bag
inflates, serious injury could result.
♦Switch your phone off before boarding an aircraft. The use of
wireless phones in aircraft is illegal unless permitted and may be
dangerous to the aircraft’s operation.
♦Failure to observe these instructions may lead to the suspension or
denial of telephone services to the offender, legal action, or both.
Health and Safety Information
161
Care and Maintenance
Your phone is a product of superior design and craftsmanship and
should be treated with care. The suggestions help you fulfill any
warranty obligations and allow enjoy this product for many years:
♦Keep the phone and all its parts and accessories out of reach of
small children.
♦Keep the phone dry. Precipitation and humidity contain minerals
that may corrode electronic circuits.
♦Do not use the phone with a wet hand. Doing so may cause an
electric shock to you or damage to the phone.
♦Do not use or store the phone in dusty or dirty areas. Moving parts
may become damaged or clogged.
♦Do not store the phone in hot areas. High temperatures can
shorten the life of electronic devices, damage batteries, and warp
or melt certain plastics.
♦Do not store the phone in cold areas. When the phone warms up to
its normal operating temperature, moisture can form inside the
phone, which may damage the phone’s electronic circuit boards.
♦Do not drop, knock or shake the phone. Rough handling can break
internal circuit boards.
♦Do not use harsh chemicals, cleaning solvents or strong
detergents to clean the phone. Wipe it with a soft cloth slightly
dampened in a mild soap-and-water solution.
♦Do not paint the phone. Paint can clog the device’s moving parts
and prevent proper operation.
♦Do not put the phone in or on heating devices, such as a
microwave oven, a stove or a radiator. The phone may explode
when overheated.
♦Use only the supplied or an approved replacement antenna.
Unauthorized antennas or modified accessories may damage the
phone and violate regulations governing radio devices.
♦If the phone, battery, charger or any accessory is not working
properly, take it to your nearest qualified service facility. The
personnel there will assist you, and if necessary, arrange for
service.
Health and Safety Information
162
FCC Notice
Cautions
Modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
FCC Compliance Information
This device complies with Part 15 of FCC Rules. Operation is subject
to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received.
Including interference that may cause undesired operation.
Information to User
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
♦Reorient or relocate the receiving antenna.
♦Increase the separation between the equipment and receiver.
Health and Safety Information
163
♦Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
♦Consult the dealer or an experienced radio/ TV technician for help.
Appendix A: CERTIFICATION INFORMATION
(SAR)
THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS
FOR EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It is designed
and manufactured not to exceed the emission limits for exposure to
radio frequency (RF) energy set by the Federal Communications
Commission of the U.S. Government. These limits are part of
comprehensive guidelines and establish permitted levels of RF
energy for the general population. The guidelines are based on safety
standards that were developed by independent scientific
organizations through periodic and thorough evaluation of scientific
studies. The standards include a substantial safety margin designed
to assure the safety of all persons, regardless of age and health.
The exposure standard for wireless mobile phones employs a unit of
measurement known as the Specific Absorption Rate (SAR). The
SAR limit set by the FCC is 1.6 W/kg**. SAR Tests are conducted
using standard operating positions accepted by the FCC with the
phone transmitting at its highest certified power level in all tested
frequency bands. Although the SAR is determined at the highest
certified power level, the actual SAR level of the phone while
operating can be well below the maximum value. This is because the
phone is designed to operate at multiple power levels so as to use
**. In the United States and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kilogram (W/kg) averaged over
one gram of tissue. The standard incorporates a substantial margin of
safety to give additional protection for the public and to account for any
variations in measurements.
Health and Safety Information
164
only the power required to reach the network. In general, the closer
you are to a wireless base station antenna, the lower the power
output.
Before a new model phone is available for sale to the public, it must
be tested and certified by the FCC that it does not exceed the limit
established by the government adopted requirement for safe
exposure. The tests are performed in positions and locations(e.g., at
the ear and worn on the body) as required by the FCC for each model.
The highest SAR values of this model phone as reported to FCC are
GSM 850
• Head: 0.516 W/Kg.
• Body-worn: 1.18 W/Kg.
PCS 1900
• Head: 0.689 W/Kg.
• Body-worn: 0.717 W/Kg.
Body-worn operations are restricted to Samsung-supplied, approved
or non-Samsung designated accessories that have no metal and
must provide at least 1.5cm separation between the device, including
its antenna whether extended or retracted, and the user’s body. Noncompliance to the above restrictions may violate FCC RF exposure
guidelines.
The FCC has granted an Equipment Authorization for this model
phone with all reported SAR levels evaluated as in compliance with
the FCC RF exposure guidelines. SAR information on this model
phone (D807) is on file with the FCC and can be found under the
Display Grant section of http:// www.fcc.gov/oet/fccid.
Appendix B: Safe and Responsible Wireless
Phone Use
Cellular Telecommunications & Internet Association
“Safety is the most important call you will ever make.”
Health and Safety Information
165
A Guide to Safe and Responsible Wireless Phone Use
Tens of millions of people in North America today take advantage of
the unique combination of convenience, safety and value delivered by
the wireless telephone. Quite simply, the wireless phone gives people
the powerful ability to communicate by voice-almost anywhere,
anytime with the boss, with a client, with the kids, with emergency
personnel or even with the police. Each year, North Americans make
billions of calls from their wireless phones, and the numbers are
rapidly growing.
But an important responsibility accompanies those benefits, one that
every wireless phone user must uphold. When driving a car, driving
is your first responsibility. A wireless phone can be an invaluable
tool, but good judgment must be exercised at all times while driving a
motor vehicle whether on the phone or not.
The basic lessons are ones we all learned as teenagers. Driving
requires alertness, caution and courtesy. It requires a heavy dose of
basic common sense-keep your head up, keep your eyes on the road,
check your mirrors frequently and watch out for other drivers. It
requires obeying all traffic signs and signals and staying within the
speed limit. It means using seat belts and requiring other passengers
to do the same.
But with wireless phone use, driving safely means a little more. This
brochure is a call to wireless phone users everywhere to make safety
their first priority when behind the wheel of a car. Wireless
telecommunications is keeping us in touch, simplifying our lives,
protecting us in emergencies and providing opportunities to help
others in need. When it comes to the use of wireless phones, safety
is your most important call.
Health and Safety Information
166
Wireless Phone “Safety Tips”
Below are safety tips to follow while driving and using a wireless
phone which should be easy to remember:
1. Get to know your wireless phone and its features such as speed
dial and redial. Carefully read your instruction manual and learn
to take advantage of valuable features most phones offer,
including automatic redial and memory. Also, work to memorize
the phone keypad so you can use the speed dial function without
taking your attention off the road.
2. When available, use a hands free device. A number of hands free
wireless phone accessories are readily available today. Whether
you choose an installed mounted device for your wireless phone
or a speaker phone accessory, take advantage of these devices if
available to you.
3. Position your wireless phone within easy reach. Make sure you
place your wireless phone within easy reach and where you can
grab it without removing your eyes from the road. If you get an
incoming call at an inconvenient time, if possible, let your voice
mail answer it for you.
4. Suspend conversations during hazardous driving conditions or
situations. Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy traffic or
hazardous weather conditions. Rain, sleet, snow and ice can be
hazardous, but so is heavy traffic. As a driver, your first
responsibility is to pay attention to the road.
5. Do not take notes or look up phone numbers while driving. If you
are reading an Contact list or business card, or writing a to do list
while driving a car, you are not watching where you are going. It’s
common sense. Don’t get caught in a dangerous situation
Health and Safety Information
167
because you are reading or writing and not paying attention to the
road or nearby vehicles.
6. Dial sensibly and assess the traffic; if possible, place calls when
you are not moving or before pulling into traffic. Try to plan your
calls before you begin your trip or attempt to coincide your calls
with times you may be stopped at a stop sign, red light or
otherwise stationary. But if you need to dial while driving, follow
this simple tip-dial only a few numbers, check the road and your
mirrors, then continue.
7. Do not engage in stressful or emotional conversations that may
be distracting. Stressful or emotional conversations and driving
do not mix-they are distracting and even dangerous when you are
behind the wheel of a car. Make people you are talking with aware
you are driving and if necessary, suspend conversations which
have the potential to divert your attention from the road.
8. Use your wireless phone to call for help. Your wireless phone is
one of the greatest tools you can own to protect yourself and your
family in dangerous situations-with your phone at your side, help
is only three numbers away. Dial 9-1-1 or other local emergency
number in the case of fire, traffic accident, road hazard or medical
emergency. Remember, it is a free call on your wireless phone!
9. Use your wireless phone to help others in emergencies. Your
wireless phone provides you a perfect opportunity to be a Good
Samaritan in your community. If you see an auto accident, crime
in progress or other serious emergency where lives are in danger,
call 9-1-1 or other local emergency number, as you would want
others to do for you.
10. Call roadside assistance or a special wireless non emergency
assistance number when necessary. Certain situations you
encounter while driving may require attention, but are not urgent
enough to merit a call for emergency services. But you still can
Health and Safety Information
168
use your wireless phone to lend a hand. If you see a broken-down
vehicle posing no serious hazard, a broken traffic signal, a minor
traffic accident where no one appears injured or a vehicle you
know to be stolen, call roadside assistance or other special nonemergency wireless number.
Careless, distracted individuals and people driving irresponsibly
represent a hazard to everyone on the road. Since 1984, the Cellular
Telecommunications Industry Association and the wireless industry
have conducted an educational outreach program to inform wireless
phone users of their responsibilities as safe drivers and good
citizens. As we approach a new century, more and more of us will
take advantage of the benefits of wireless telephones. And, as we
take to the roads, we all have a responsibility to drive safely.
The wireless industry reminds you to use your phone safely when
driving.
Cellular Telecommunications & Internet Association For more
information, please call 1-888-901-SAFE.
For updates: http://www.wow-com.com/consumer/issues/driving/
articles.cfm?ID =85
Appendix C: Consumer Update on Wireless
Phones
U.S. Food and Drug Administration
1. What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless phones
with built-in antennas, often called cell, mobile, or PCS phones.
These types of wireless phones can expose the user to measurable
radio frequency energy (RF) because of the short distance between
the phone and the user s head. These RF exposures are limited by
Federal Communications Commission safety guidelines that were
developed with the advice of FDA and other federal health and safety
agencies. When the phone is located at greater distances from the
Health and Safety Information
169
user, the exposure to RF is drastically lower because a person’s RF
exposure decreases rapidly with increasing distance from the source.
The so-called “cordless phones,” which have a base unit connected
to the telephone wiring in a house, typically operate at far lower
power levels, and thus produce RF exposures well within the FCC’s
compliance limits.
2. Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health
problems are associated with using wireless phones. There is no
proof, however, that wireless phones are absolutely safe. Wireless
phones emit low levels of radio frequency energy (RF) in the
microwave range while being used. They also emit very low levels of
RF when in the stand-by mode. Whereas high levels of RF can
produce health effects (by heating tissue), exposure to low level RF
that does not produce heating effects causes no known adverse
health effects. Many studies of low level RF exposures have not
found any biological effects. Some studies have suggested that some
biological effects may occur, but such findings have not been
confirmed by additional research. In some cases, other researchers
have had difficulty in reproducing those studies, or in determining
the reasons for inconsistent results.
3. What is FDA’s role concerning the safety of wireless phones?
Under the law, FDA does not review the safety of radiation emitting
consumer products such as wireless phones before they can be sold,
as it does with new drugs or medical devices. However, the agency
has authority to take action if wireless phones are shown to emit
radio frequency energy (RF) at a level that is hazardous to the user. In
such a case, FDA could require the manufacturers of wireless phones
to notify users of the health hazard and to repair, replace or recall the
phones so that the hazard no longer exists.
Health and Safety Information
170
Although the existing scientific data do not justify FDA regulatory
actions, FDA has urged the wireless phone industry to take a number
of steps, including the following:
♦Support needed research into possible biological effects of RF of
the type emitted by wireless phones;
♦Design wireless phones in a way that minimizes any RF exposure
to the user that is not necessary for device function; and
♦Cooperate in providing users of wireless phones with the best
possible information on possible effects of wireless phone use on
human health
FDA belongs to an interagency working group of the federal agencies
that have responsibility for different aspects of RF safety to ensure
coordinated efforts at the federal level. The following agencies belong
to this working group:
♦National Institute for Occupational Safety and Health
♦Environmental Protection Agency Federal Communications
Commission
♦Occupational Safety and Health Administration
♦National Telecommunications and Information Administration
♦The National Institutes of Health participates in some interagency
working group activities, as well.
FDA shares regulatory responsibilities for wireless phones with the
Federal Communications Commission (FCC). All phones that are sold
in the United States must comply with FCC safety guidelines that limit
RF exposure. FCC relies on FDA and other health agencies for safety
questions about wireless phones.
FCC also regulates the base stations that the wireless phone
networks rely upon. While these base stations operate at higher
power than do the wireless phones themselves, the RF exposures
that people get from these base stations are typically thousands of
times lower than those they can get from wireless phones. Base
stations are thus not the primary subject of the safety questions
discussed in this document.
Health and Safety Information
171
4. What is FDA doing to find out more about the possible health
effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and with
groups of investigators around the world to ensure that high priority
animal studies are conducted to address important questions about
the effects of exposure to radio frequency energy (RF).
FDA has been a leading participant in the World Health Organization
International Electromagnetic Fields (EMF) Project since its inception
in 1996. An influential result of this work has been the development
of a detailed agenda of research needs that has driven the
establishment of new research programs around the world. The
Project has also helped develop a series of public information
documents on EMF issues.
FDA and the Cellular Telecommunications & Internet Association
(CTIA) have a formal Cooperative Research and Development
Agreement (CRADA) to do research on wireless phone safety. FDA
provides the scientific oversight, obtaining input from experts in
government, industry, and academic organizations. CTIA-funded
research is conducted through contracts to independent
investigators. The initial research will include both laboratory studies
and studies of wireless phone users. The CRADA will also include a
broad assessment of additional research needs in the context of the
latest research developments around the world.
5. What steps can I take to reduce my exposure to radio frequency
energy from my wireless phone?
If there is a risk from these products—and at this point we do not
know that there is—it is probably very small. But if you are
concerned about avoiding even potential risks, you can take a few
simple steps to minimize your exposure to radio frequency energy
(RF). Since time is a key factor in how much exposure a person
receives, reducing the amount of time spent using a wireless phone
will reduce RF exposure.
Health and Safety Information
172
If you must conduct extended conversations by wireless phone every
day, you could place more distance between your body and the
source of the RF, since the exposure level drops off dramatically with
distance. For example, you could use a headset and carry the
wireless phone away from your body or use a wireless phone
connected to a remote antenna
Again, the scientific data do not demonstrate that wireless phones
are harmful. But if you are concerned about the RF exposure from
these products, you can use measures like those described above to
reduce your RF exposure from wireless phone use.
6. What about children using wireless phones?
The scientific evidence does not show a danger to users of wireless
phones, including children and teenagers. If you want to take steps to
lower exposure to radio frequency energy (RF), the measures
described above would apply to children and teenagers using
wireless phones. Reducing the time of wireless phone use and
increasing the distance between the user and the RF source will
reduce RF exposure.
Some groups sponsored by other national governments have advised
that children be discouraged from using wireless phones at all. For
example, the government in the United Kingdom distributed leaflets
containing such a recommendation in December 2000. They noted
that no evidence exists that using a wireless phone causes brain
tumors or other ill effects. Their recommendation to limit wireless
phone use by children was strictly precautionary; it was not based on
scientific evidence that any health hazard exists.
7. Do hands-free kits for wireless phones reduce risks from
exposure to RF emissions?
Since there are no known risks from exposure to RF emissions from
wireless phones, there is no reason to believe that hands-free kits
reduce risks. Hands-free kits can be used with wireless phones for
Health and Safety Information
173
convenience and comfort. These systems reduce the absorption of
RF energy in the head because the phone, which is the source of the
RF emissions, will not be placed against the head. On the other hand,
if the phone is mounted against the waist or other part of the body
during use, then that part of the body will absorb more RF energy.
Wireless phones marketed in the U.S. are required to meet safety
requirements regardless of whether they are used against the head or
against the body. Either configuration should result in compliance
with the safety limit.
8. Do wireless phone accessories that claim to shield the head from
RF radiation work?
Since there are no known risks from exposure to RF emissions from
wireless phones, there is no reason to believe that accessories that
claim to shield the head from those emissions reduce risks. Some
products that claim to shield the user from RF absorption use special
phone cases, while others involve nothing more than a metallic
accessory attached to the phone. Studies have shown that these
products generally do not work as advertised. Unlike “hand-free”
kits, these so-called “shields” may interfere with proper operation of
the phone. The phone may be forced to boost its power to
compensate, leading to an increase in RF absorption. In February
2002, the Federal trade Commission (FTC) charged two companies
that sold devices that claimed to protect wireless phone users from
radiation with making false and unsubstantiated claims. According to
FTC, these defendants lacked a reasonable basis to substantiate their
claim.
9. What about wireless phone interference with medical equipment?
Radio frequency energy (RF) from wireless phones can interact with
some electronic devices. For this reason, FDA helped develop a
detailed test method to measure electromagnetic interference (EMI)
of implanted cardiac pacemakers and defibrillators from wireless
Health and Safety Information
174
telephones. This test method is now part of a standard sponsored by
the Association for the Advancement of Medical instrumentation
(AAMI). The final draft, a joint effort by FDA, medical device
manufacturers, and many other groups, was completed in late 2000.
This standard will allow manufacturers to ensure that cardiac
pacemakers and defibrillators are safe from wireless phone EMI.
FDA has tested hearing aids for interference from handheld wireless
phones and helped develop a voluntary standard sponsored by the
Institute of Electrical and Electronic Engineers (IEEE). This standard
specifies test methods and performance requirements for hearing
aids and wireless phones so that no interference occurs when a
person uses a compatible phone and a compatible hearing aid at the
same time. This standard was approved by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for possible
interactions with other medical devices. Should harmful interference
be found to occur, FDA will conduct testing to assess the interference
and work to resolve the problem.
10. What are the results of the research done already?
The research done thus far has produced conflicting results, and
many studies have suffered from flaws in their research methods.
Animal experiments investigating the effects of radio frequency
energy (RF) exposures characteristic of wireless phones have yielded
conflicting results that often cannot be repeated in other laboratories.
A few animal studies, however, have suggested that low levels of RF
could accelerate the development of cancer in laboratory animals.
However, many of the studies that showed increased tumor
development used animals that had been genetically engineered or
treated with cancer causing chemicals so as to be pre-disposed to
develop cancer in the absence of RF exposure. Other studies exposed
the animals to RF for up to 22 hours per day. These conditions are
not similar to the conditions under which people use wireless
Health and Safety Information
175
phones, so we don’ t know with certainty what the results of such
studies mean for human health.
Three large epidemiology studies have been published since
December 2000. Between them, the studies investigated any possible
association between the use of wireless phones and primary brain
cancer, gioma, meningioma, or acoustic neuroma, tumors of the
brain or salivary gland, leukemia, or other cancers. None of the
studies demonstrated the existence of any harmful health effects
from wireless phone RF exposures. However, none of the studies can
answer questions about long-term exposures, since the average
period of phone use in these studies was around three years.
11. What research is needed to decide whether RF exposure from
wireless phones poses a health risk?
A combination of laboratory studies and epidemiological studies of
people actually using wireless phones would provide some of the
data that are needed. Lifetime animal exposure studies could be
completed in a few years. However, very large numbers of animals
would be needed to provide reliable proof of a cancer promoting
effect if one exists. Epidemiological studies can provide data that is
directly applicable to human populations, but 10 or more years
follow-up may be needed to provide answers about some health
effects, such as cancer. This is because the interval between the time
of exposure to a cancer-causing agent and the time tumors develop if they do - may be many, many years. The interpretation of
epidemiological studies is hampered by difficulties in measuring
actual RF exposure during day-to-day use of wireless phones. Many
factors affect this measurement, such as the angle at which the
phone is held, or which model of phone is used.
12. Which other federal agencies have responsibilities related to
potential RF health effects?
Health and Safety Information
176
Additional information on the safety of RF exposures from various
sources can be obtained from the following organizations.
FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
Occupational Safety and Health Administration’s (OSHA):
http://www.osha-slc.gov/SLTC/radiofrequencyradiation/index.html
National Institute for Occupational Safety and Health (NIOSH):
http://www.cdc.gov/niosh/emfpg.html
World health Organization (WHO):
http://www.who.int/peh-emf/
International Commission on Non-Ionizing Radiation Protection:
http://www.icnirp.de
National Radiation Protection Board (UK):
http://www.nrpb.org.uk
Updated 4/3/2002: US Food and Drug Administration
http://www.fda.gov/cellphones
Health and Safety Information
177
STANDARD LIMITED WARRANTY
What is Covered and For How Long? SAMSUNG ELECTRONICS
CANADA INC. (SAMSUNG) warrants to the original purchaser
("Purchaser") that SAMSUNG’s Phones and accessories ("Products")
are free from defects in material and workmanship under normal use
and service for the period commencing upon the date of purchase
and continuing for the following specified period of time after that
date:
Phone
1 Year
Batteries
1 Year
Leather Case/Pouch
90 Days
Holster
90 Days
Other Phone Accessories
1 Year
What is Not Covered? This Limited Warranty is conditioned upon
proper use of Product by Purchaser. This Limited Warranty does not
cover: (a) defects or damage resulting from accident, misuse, abuse,
neglect, unusual physical, electrical or electromechanical stress, or
modification of any part of Product, including antenna, or cosmetic
damage; (b) equipment that has the serial number removed or made
illegible; (c) any plastic surfaces or other externally exposed parts
that are scratched or damaged due to normal use; (d) malfunctions
resulting from the use of Product in conjunction with accessories,
products, or ancillary/peripheral equipment not furnished or
approved by SAMSUNG; (e) defects or damage from improper
testing, operation, maintenance, installation, or adjustment; (f)
installation, maintenance, and service of Product, or (g) Product
used or purchased outside the United States or Canada.
STANDARD LIMITED WARRANTY
178
This Limited Warranty covers batteries only if battery capacity falls
below 80% of rated capacity or the battery leaks, and this Limited
Warranty does not cover any battery if (i) the battery has been
charged by a battery charger not specified or approved by SAMSUNG
for charging the battery, (ii) any of the seals on the battery are broken
or show evidence of tampering, or (iii) the battery has been used in
equipment other than the SAMSUNG phone for which it is specified.
What are SAMSUNG’s Obligations? During the applicable warranty
period, SAMSUNG will repair or replace, at SAMSUNG’s sole option,
without charge to Purchaser, any defective component part of
Product. To obtain service under this Limited Warranty, Purchaser
must return Product to an authorized phone service facility in an
adequate container for shipping, accompanied by Purchaser’s sales
receipt or comparable substitute proof of sale showing the date of
purchase, the serial number of Product and the sellers’ name and
address. To obtain assistance on where to deliver the Product, call
Samsung Customer Care at 1-800-SAMSUNG. Upon receipt,
SAMSUNG will promptly repair or replace the defective Product.
SAMSUNG may, at SAMSUNG’s sole option, use rebuilt,
reconditioned, or new parts or components when repairing any
Product or replace Product with a rebuilt, reconditioned or new
Product. Repaired/replaced leather cases, pouches and holsters will
be warranted for a period of ninety (90) days. All other repaired/
replaced Product will be warranted for a period equal to the
remainder of the original Limited Warranty on the original Product or
for 90 days, whichever is longer. All replaced parts, components,
boards and equipment shall become the property of SAMSUNG. If
SAMSUNG determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts, shipping, and labor
charges for the repair or return of such Product.
What Are the Limits On SAMSUNG’s Liability? EXCEPT AS SET
FORTH IN THE EXPRESS WARRANTY CONTAINED HEREIN,
PURCHASER TAKES THE PRODUCT “AS IS,” AND SAMSUNG
STANDARD LIMITED WARRANTY
179
MAKES NO WARRANTY OR REPRESENTATION AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE,
OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT,
INCLUDING BUT NOT LIMITED TO:
♦THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR
ANY PARTICULAR PURPOSE OR USE;
♦WARRANTIES OF TITLE OR NON-INFRINGEMENT;
♦DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE
PRODUCT;
♦THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
♦COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF
ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING
THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION
OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF
TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN.
SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION
MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE
PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE
PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE
OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF THE
EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,
CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF
ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING
FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS
NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS
STANDARD LIMITED WARRANTY
180
OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR ANY
CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY.
SOME STATES/PROVINCES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU
MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO
STATE/PROVINCE TO PROVINCE. THIS LIMITED WARRANTY SHALL
NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL
PURCHASER OF THIS PRODUCT AND STATES PURCHASER’S
EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED
WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY REASON OF
ANY LAW, SUCH PARTIAL ILLEGALITY OR UNENFORCEABILITY
SHALL NOT AFFECT THE ENFORCEABILITY FOR THE REMAINDER
OF THIS LIMITED WARRANTY WHICH PURCHASER
ACKNOWLEDGES IS AND WILL ALWAYS BE CONSTRUED TO BE
LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS.
THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE
THIRD-PARTY SOFTWARE OR EQUIPMENT IN CONJUNCTION WITH
THE PRODUCT. SAMSUNG MAKES NO WARRANTIES OR
REPRESENTATIONS AND THERE ARE NO CONDITIONS, EXPRESS
OR IMPLIED, STATUTORY OR OTHERWISE, AS TO THE QUALITY,
CAPABILITIES, OPERATIONS, PERFORMANCE OR SUITABILITY OF
ANY THIRD-PARTY SOFTWARE OR EQUIPMENT, WHETHER SUCH
THIRD-PARTY SOFTWARE OR EQUIPMENT IS INCLUDED WITH THE
PRODUCT DISTRIBUTED BY SAMSUNG OR OTHERWISE,
INCLUDING THE ABILITY TO INTEGRATE ANY SUCH SOFTWARE OR
EQUIPMENT WITH THE PRODUCT. THE QUALITY, CAPABILITIES,
OPERATIONS, PERFORMANCE AND SUITABILITY OF ANY SUCH
THIRD-PARTY SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE
PURCHASER AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF
SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE
MAY BE.
STANDARD LIMITED WARRANTY
181
This Limited Warranty allocates risk of Product failure between
Purchaser and SAMSUNG, and SAMSUNG’s Product pricing reflects
this allocation of risk and the limitations of liability contained in this
Limited Warranty. The agents, employees, distributors, and dealers
of SAMSUNG are not authorized to make modifications to this
Limited Warranty, or make additional warranties binding on
SAMSUNG. Accordingly, additional statements such as dealer
advertising or presentation, whether oral or written, do not constitute
warranties by SAMSUNG and should not be relied upon.
Samsung Electronics Canada, Inc.
©2006 Samsung Electronics Canada, Inc.. SAMSUNG is a registered
trademark of Samsung Electronics Co., Ltd. and its related entities.
No reproduction in whole or in part allowed without prior written
approval.
Specifications and availability subject to change without notice.
STANDARD LIMITED WARRANTY
182
Index
A
Alarm • 78
Alert type 133
Alphabet mode, text input • 32
Answering
call • 21
second call • 28
Anykey answer • 130
Auto redial • 129
B
Backlight
description • 9
Battery
charging 14
installing 14
low indicator 15
removing 11
Bluetooth 140
Searching for new devices 140
Security modes 141
Visibility 141
Broadcast messages 74
C
Calculator • 84
Calendar memos
viewing • 82
writing • 81
Call barring • 137
Call records
missed • 22, 58
Call time • 60
Caller groups
editing • 122
searching • 122
Caller ID • 139
Calls
answering • 21, 28
barring • 137
ending • 19
forwarding • 136
holding • 25
making • 19
redialing • 20
waiting • 28, 138
Camera
taking photos • 91
Characters, entering • 30
Charging battery 14
Conference call • 25
Connect tone • 136
Connection settings, Profile
Settings 146
Contact List
copying • 116
deleting • 117, 122
editing • 116
Management 123
searching/dialing • 122
storing • 118
Converter 85
D
Dangerous areas • 160
Deleting
Contact List • 117
videos • 99
Deleting Games 77
Display
backlight • 9
icons • 8
layout • 7
DTMF tones, send • 27
E
Earpiece volume • 21
Entering Text 30
Using Alphabet Mode 32
Using T9 mode 31
Using the Symbol Mode 34
183
F
Health and safety • 155
HiFi Ringers 133
Holding, calls • 25
Memory Status 115
Contact List • 125
Menus
accessing • 42
list • 43
Messages 62
Micro SD memory card 114
Minute minder • 135
Missed calls • 22, 58
MP3 player 96
Mp3 Player
Creating your playlist 96
Using the MP3 player 97
Multimedia Message
Settings 73
Multi-party calls • 17
Muting
microphone • 27
My music 112
I
N
Icons, description • 8
IM
Settings 71
Installing microSD Card 15
Instant Messaging 62
International calls • 19
Names
searching/dialing • 122
Network selection • 139
Network services • 146
Numbers, phone
searching/dialing • 122
storing • 118
FDN (Fixed Dial Number) mode •
146
G
Games
deleting 77
Get Ringtunes 87, 88
Getting Started
Activating Your Phone 11
Graphic logo • 133
H
K
Key volume • 21
Keypad tones
selecting • 134
L
Language, select • 128
Last number, redial • 20
Locking
phone • 144
Low battery indicator 15
M
Memory Card 10, 114
184
O
On/off switch, phone • 15
P
Password, phone • 144, 149
Phone
display • 7
icons • 8
layout • 4
locking • 144
password • 149
resetting • 148
switching on/off • 15
Phone Settings
resetting 146
Photos
deleting • 94, 95
taking • 91
PIN
changing • 144
description • 150
PIN2
description • 150
Power on/off tone • 135
Privacy • 145
PUK • 150
PUK2 • 151
Push Message
Settings 74
R
Radio frequency • 155
Record Audio 41
Redialing
automatically • 129
manually • 20
Resetting phone • 146
Ring Volume 133, 134
Roaming • 139
S
Safety
information • 155
precautions • 1
Schedule • 80
SDN (Service Dialing Numbers) •
126
Searching, Contact List • 117
Security
changing passwords 144
locking
media contents • 145
Phone Lock 144
PIN Check 143
SIM Lock 145
Security • 146
Silent mode • 24
SIM card
installing 12
installing • 11
removing 13
SIM Lock 145
Sound settings • 133
Stopwatch 86
Switching on/off
microphone • 27
phone • 15
Symbol Mode 34
T
T9 mode, text input • 31
Text input mode • 30
Text Message
Settings 72
Text, entering • 30
Time format • 127
Timer 86
Tone
connect • 136
folder • 135
keypad • 134
minute minder • 136
power on/off • 135
Travel adapter 14
V
Vibration • 24
Voice Command 100
Voice Mail 69
Volume, adjust
earpiece • 21
keypad tone • 21
W
Waiting call • 28, 138
World time 86
185