Baofeng UV-82 Step-by-Step Programming Guide

Baofeng UV-82 Step-by-Step Programming Guide
Also applies to UV-82L, UV-82X, UV-82C, UV-89
Noji Ratzlaff
Set the radio to communicate with a repeater at 147.080+ MHz, 77.0 Hz
0.
Turn on the radio and make sure it’s unlocked
1.
If the radio is in channel mode, turn off the
radio, then press and hold M ENU while
turning on the radio
2.
4.
6.
7.
Set the transm it tone frequency
M ENU - 13 - M ENU - 770 - M ENU - EXIT/AB
8.
Turn off the TDR
M ENU - 7 - M ENU - OFF - M ENU - EXIT/AB
Set the repeater shift direction
M ENU - 25 - M ENU - + - M ENU - EXIT/AB
Set the frequency
1-4-7-0-8-0
Set the repeater offset
M ENU - 26 - M ENU - 00600 - M ENU - EXIT/AB
Select the upper display
EXIT/AB
3.
5.
Set the transm it pow er level
M ENU - 2 - M ENU - HIGH - M ENU - EXIT/AB
Your radio is now set to transm it as specified
Store the current repeater and tone settings in a memory channel
0.
Follow the procedure above to set your radio
for the frequency of your choice
1.
Clear target memory channel 37
2.
Store the frequency in channel 37
M ENU - 27 - M ENU - 37 - M ENU - EXIT/AB
%
M ENU - 28 - M ENU - 37 - M ENU - EXIT/AB
M ENU - 27 - M ENU - 37 - M ENU - EXIT/AB
%
The frequency is now stored in radio memory
Recall a stored memory setting
0.
Turn on the radio and make sure it’s unlocked
1.
If the radio is in frequency mode, turn off the
radio, then press and hold M ENU while
turning on the radio
2.
Press the up or dow n arrows or enter the
three-digit channel number (all three digits)
0-3-6
The stored channel is now ready for use
Set the radio to communicate at 146.740 MHz simplex
0.
Turn on the radio and make sure it’s unlocked
1.
If the radio is in channel mode, turn off the
radio, then press and hold M ENU while
turning on the radio
2.
4.
6.
Set the transm it pow er level
M ENU - 2 - M ENU - HIGH - M ENU - EXIT/AB
7.
Set the frequency
1-4-6-7-4-0
Turn off the repeater shift direction
M ENU - 25 - M ENU - OFF - M ENU - EXIT/AB
Select the upper display
EXIT/AB
3.
5.
Clear target memory channel 5
M ENU - 28 - M ENU - 5 - M ENU - EXIT/AB
8.
Store the frequency in channel 5
Turn off the TDR
M ENU - 27 - M ENU - 5 - M ENU - EXIT/AB
M ENU - 7 - M ENU - OFF - M ENU - EXIT/AB
%
M ENU - 27 - M ENU - 5 - M ENU - EXIT/AB
%
The simplex frequency is now stored in radio
memory
Download PDF
Similar pages
MINI SPY CAMERA
BaoFeng BF-888S
LOW VOLTAGE GARDEN LIGHTING SET ASSEMBLY AND
BaoFeng UV-82L User FAQs
Park