LA Fitness DK850BAF01AA Owner's Manual

DK850BAF01AA
OWNER’S MANUAL
Index
‹
Pre Installation Tips / Selecting Where Your Bike Goes …………………………………… 02
‹
Important Safety Instructions ……………………………………………………………… 03
‹
Specifications ………………………………………………………………………............ 05
‹
Assembly Parts ……………………………………………………...……………………….06
‹
Parts Details ………………………………………………………………………………… 07
‹
Assembly Procedures ………………………………………………………………………. 08
‹
Operation Instruction ……………………………………………………………………….. 14
1
2012/3/2Ver1.1+V1.0
Pre Installation Tips
The following are tips to aid you in the installation of the 850B Fitness Bike:
1. Prepare all relevant parts before starting, this will save you time!
2. All screws are tightened by turning to the right and loosened to the left.
3. All tools needed for complete installation are provided.
4. Having another person to help will make it easier.
5. All instructions are written as if the user is positioned on the bike facing the computer.
Selecting Where Your Bike Goes
Positioning
- The ideal place to use your bike is on solid and even ground.
- There should be at least a 45cm gap either side and behind for ease of getting on and off.
- Make sure a power socket is a suitable distance away.
- Try and put your bike in a room that is used often, keeping it in sight will keep you using it!
Moving Your Bike
- The 850B Fitness Bike is very heavy, so please ensure two people are available to move it.
- DO NOT grasp the bike by the computer.
-Only wheel the bike when indoors and on a flat surface. When used outdoors on concrete or
gravel the wheels may chip or buckle.
2
2012/3/2Ver1.1+V1.0
Important Safety Instructions
When using this product, basic precautions should always be followed, including the following:
Please read the instruction carefully before starting to use this product.
Danger – To reduce the risk of electric shock：
Always unplug this product from the electrical outlet immediately after using and before cleaning the
treadmill.
Warning – To reduce the risk of burns, fire, electric shock, or physical injury：
1.
The product should never be left unattended while plugged in.
2.
When using the treadmill, please step on the treadmill before start. Do not start the treadmill and
then step on the equipment.
Unplug the product from the outlet when not in use or before putting on or taking off the clothes
and other belongings.
3.
To avoid any danger, close supervision is necessary when this production is used by children,
invalids or disabled persons. So it is when the machine is working with such persons around.
4.
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
5.
Not proper or excessive training may be harmful to your health.
6.
Be sure to use the product only for its intended use as described in this manual. Do not use any
attachment not recommended by the manufacturer in order to avoid any danger or accidents
7.
Never operate the product if it has a damaged cord or plug, if it is not working properly, if it has
been damaged, or dropped into water. Please return the product to the service center of seller for
examination and repair.
8.
Do not carry this product by the supply cord or use the cord as a handle.
3
2012/3/2Ver1.1+V1.0
9.
Keep the cord away from hot surfaces or ground.
10. Never operate the product with the air vents blocked. Keep the air vents free of lint, hair, etc.
11. Never drop or insert any objects into any vent of the treadmill.
12. Do not use or operate outdoors.
13. Place the treadmill on flat ground or flat roof.
14. Please confirm 100cm space away behind the bike or equipment.
15. Do not operate where aerosol (spray) products are being used or where oxygen is thin.
16. Before turning the product power off, turn all controls to the off position then remove the plug
from the outlet
17. Connect the product to a properly grounded outlet only.
18. If the machine has folding mechanism, user should descend the incline to original position after
workout.
19. The max weight of user is 180 kg.
20. The appliance is intended for commercial use only.
21. The safety level of the equipment can be maintained only if it is examined regularly for damage
and wear.
22. The baking system is speed-dependent in watt control mode and speed-independent for other
modes.
23. Place Customer Service Address (one of Manufacturer, Importer, Agent).
EX. No. 1, LANE 160, SEC. 2, TANFU-ROAD, TAN TZU HSIANG, TAICHUNG, TAIWAN, R.O.C.
4
2012/3/2Ver1.1+V1.0
Specifications
Max. User Weight
400 lbs/180 kg
Size of Machine
64 cm x 132 cm x 146 cm
Packing Weight of
62.2kg
Machine
Net Weight of
Machine
52.2kg
Power Supply
15V/1A DC (Charger)
Note: Charge your battery once per week
5
2012/3/2Ver1.1+V1.0
Assembly Parts
6
2012/3/2Ver1.1+V1.0
Parts Details
ITEM
Description
Qty
a
b
c
d
e
f
g
h
i
Steel hexagon socket head screw M8xP1.25x25 Blue Nylok
Spring washer M8
Flat washer Ø8x Ø16x2.0t
Inner steel hexagon socket head screw M8XP1.25X20 Blue Nylok
Spring washer M8
Umbrella-head cross screw blue nylok M4xP0.7x10
Spring washer M4
Round-head cross screw M5x15
Allen wrench 6mmx40x120 <120 crossing for longer part>
4
4
4
4
4
4
4
3
1
7
2012/3/2Ver1.1+V1.0
Assembly Procedures
STEP 1. Attaching the Seat to the Main Frame of the bike
1.
After must first loads POPIN(H), then seat cushion (D) depends on the arrow direction insertion
frame group (C) localization then.
8
2012/3/2Ver1.1+V1.0
STEP 2. Attaching the Upper Control Frame to the Main Frame
1. Thread the wire from the Bike Frame (B) to the Upper Control Frame (C), then place the two frames
together. Insert steel hexagon socket head screws (a), spring washers (b) and flat washers (c)
according to the figures and tighten.
9
2012/3/2Ver1.1+V1.0
STEP 3. Attaching the Handlebars
1.
Thread the 3 wires in the Handles (E) through the exit of the bend pipe on the Control Frame.
Then fix the handlebars by tightening with the CKS Hex Screws (d) and Spring Washers (e)
according to the drawing below.
Caution:
‹ When assembling the handles and upper control frame, kneeling down may be needed.
Please take care when standing back up to avoid hitting your head or causing other
injury.
10
2012/3/2Ver1.1+V1.0
STEP 4.
1.
Wire connection of control pipe system
Pull out the wires in the tube of the Upper Control Frame (B) according to the drawing
below.
11
2012/3/2Ver1.1+V1.0
STEP 5.
Attaching the Computer
1. Connect the Computer (A) with the wires from the Upper Control Frame (B). Fix using Blue
Nylok Screws (f) and M4 Spring Washers (g). Make sure the screws have been tightened well
to avoid any loosening or possible damage to the computer.
Caution:
‹When assembling the Computer, kneeling down may be needed. Please take care when
standing back up to avoid hitting your head or causing other injury.
‹Make sure the bike is not plugged in when attaching the Computer to avoid a possible electric
shock.
‹When attaching the wires make sure they are connected securely and not wound around each
other or tangled in any way. This will avoid possible short circuiting.
‹No less than 2 persons are needed for assembly. One should hold the Computer in place while
the other connects the wires and tightens the screws.
12
2012/3/2Ver1.1+V1.0
STEP 6. Attaching the Decoration Covers to the Bike Frame
1.
Finally, fasten the left and right decoration covers (G and F) with Round Head Philips
Screws (h) according to the drawing below.
13
2012/3/2Ver1.1+V1.0
Computer Operation Instructions
I. Subject Instruction
This computer is
7”with TFT-LCD window which can display SPEED、LEVEL、DISTANCE、
CAL、TIME、WATTS、BPM、RPM and PROGRAM figure.
II. Display and booting of the starting-up window
goals mode：Target TIME, DISTANCE and CALORIE exercise mode.
race mode: User can compete with computer according to the distance and time
he wants.
fitness test mode：6 minutes of self-movement model of physical fitness
(heartbeat health evaluating)
HRC mode：Heartbeat exercise mode which has levels of 65%, 75%, 85% and
THR. Set the exercise levels in accordance with the
coach or requirements of self-direction.
programs mode：There are exercise program, stable exercise program and six
14
2012/3/2Ver1.1+V1.0
different kind of program to choose.
user mode: User can set up the intensity of each level freely, total are 32 levels.
III. Key Functions(Any effectively key should create one sound)
1. QUICK START：Press this key to start the machine directly and account numbers of all
kinds of function
2. STOP：Press this key to stop the counting of each program Under this data setting status,
press this KEY to return the standby mode.
3. PAUSE：Press PAUSE key to pause the program and all the windows will stop counting.
Press this key again to start.
4. MODE：Under start/ready status, press this key to switch Profile.
Press this key to change playground or project figure while running.
Zoom in or zoom out the menu under video mode(TV model).
5. ENTER：Enter into options or touch this key for confirmation.
6. CLEAR：When entering program control mode to set parameters, touch this key to get
back the default value and return to the first parameter or item. (one press will return one
level)
7. LEVEL ↑: Press this key to increase level and the values set up while running.
8. LEVEL ↓: Press this key to decrease level and the values set up while running.
9. FAN：After the motor starts, press this key to boot up the fan and in the running of the fan,
press this key to stop.
10. NUMBER KEY * 10 Key：(1,2,3,~0)
Press this key to input instant value under data setting status.
While setting parameters, this key is number instant key. Setting range is integral value. It
has single code input and double code combination input. Take 21 years old for example,
Press ”2”and release it first, and then press”1”(determinant time is within 1 second).
15
2012/3/2Ver1.1+V1.0
IV. Mode Instructions
1.
2.
3.
4.
5.
For the treadmill is dynamo type, it need 25PRM above or 15VDC/1000ma
transformer to start the computer continuously.
When the treadmill not plug to the transformer, the computer will be totally powered
by dynamo. While the rotate speed is lower than 40RPM, the computer will be
powered by batteries. If not operated for 30 seconds, it will enter into electric save
mode(the screen will shut down).
When stepping(40RPM↑), the electric power will save automatically.
While the rotate speed is lower than 40RPM, it will display ”RPM↑”icon.
When ”RPM↑”display for 15 seconds, it will enter into PAUSE MODE and back to
start/ready menu after 45 seconds
Under electric save mode or PAUSE mode, when the rotate speed is higher than
60RPM, it will resume to start/ready menu.
6.
key, it will enter
Under Start/Ready mode or program control mode, if press
into start-up of Manual run directly.(Parameters adopt the default value)
7.
Under Start/Ready status, you can press
key to choose Goal mode, Programs
mode, Fitness Test Mode, HRC mode, USER mode or RACE mode in center window.
The selected item will show by blue frame.
8.
Program mode：After choosing PROGRAM, adjust parameter, or press
directly
to start.
9. If the value is above 0, it will be executed by countdown. When the value returns to
zero, the program is over. On the contrary, if the value is 0, it will be executed by
count up.
10. PROGRAM has 32 levels in all. The setting time will be executed averagely by 32
levels.
11. While setting any parameter, you can press
to cancel the setting and back to
the first parameter or program control menu. All the parameters will get back to the
default value.
12. There are character strings to instruct the user how to operate under mode edit menu
or parameter setting menu.
13. While running, the center menu goes contrarotate like along playground. On the
bottom left corner will display the number of circles(LAPS) .Every circle is 0.4KM
16
2012/3/2Ver1.1+V1.0
(0.25MIL).You can switch it to project mode by pressing
key.
14. After the program is over or under pause mode for 30 seconds, the buzzer will beep
for 5 sound and then the accumulate sport values will display in the center window
and after 20 seconds or press
key, it will back to start/ready menu.
17
2012/3/2Ver1.1+V1.0
V.
General Operation and Instructions：
1. Under start/ready status, press
key, it will enter into MANUAL mode and after 3
seconds countdown, the treadmill will start running.
2. MANUAL mode has total 20 levels for your choice as you prefer.
3. There are 6 main program controls for choose under start/ready menu
4. User can press
key to choose the desired LEVEL(According to the rotate speed,
the same LEVEL has different resistance feedback)
z Goal Mode
Time Goal：Set the time goal required if running in the destination area and when the goal is
reached, the program will stop automatically.
Distance Goal：This program serves to test the endurance of the user. When the user
completes the set miles within limited time and reaches the goal, the program will stop
operation automatically.
Calories Goal：This program serves to lose and control weight. When certain quantity of the
calories is exhausted within limited time, the program will stop operation automatically.
1. Press
key to select this mode and press
key into the target value
setting:
Press number instant key or
to adjust WEIGHT(Preset value: 70kg; Range
is 23-180kg ), TIME(Preset value: 20 min; Range: 0, 10-99min) or
DISTANCE(Preset value: 5KM; Range: 0-99KM) or CALORIES(Preset value:
500Kcal; Range: 0-999 Kcal).
1.
After setting the parameters or while setting parameters, press
or
key to execute the program(The unset value will adopt the default value). The target
parameter is executed by countdown.
3.
If you want to change the parameters, press
reset or press
key to back to the first item to
key to directly back to the start/ready status.
18
2012/3/2Ver1.1+V1.0
4.
User can press
key to choose the desired LEVEL(According to the rotate
speed, the same LEVEL has different resistance feedback)
z Fitness Test Mode(Physical fitness training)
1.
Press
setting:
key to select this mode and press
key into the target value
Press number instant key or
to adjust WEIGHT(Preset value: 70kg;
Range is 23-180kg ), AGE(Preset value:30; Range: 10-90) and SEX(Preset is male;
male or female)
2. After setting the parameters or while setting parameters, press
or
key to execute the program(The unset value will adopt the default value). The target
parameter is executed by countdown.(Program will calculate the criteria according to
the editing value).
3. If you want to change the parameters, press
key to back to the first item to
reset or press
key to directly back to the start/ready status.
4. Execute time is 6 minutes and every level time is 6 minutes divide 32 levels. It is
executed by countdown.
5. Male preset value: 150 Watts; Female preset value: 100 Watts. The value will increase
to the default value from 45Watts after starting the program
key to choose the desired LEVEL(According to the rotate
6. User can press
speed, the same LEVEL has different resistance feedback)
7. After finished the program, it will enter into YOUR FITNESS TEST RESULT menu
automatically. FITNESS LEVEL window will display 1~5 number, 1 represents the
worst test result and 5 represents the best result.
8. FITNESS TEST mode comparison table：
If Distance is 0, the result number will be 0.
MALE
AGE
HEART RATE
<35
>=186
>=170
>=139
>=129
<129
<45
>=183
>=165
>=124
>=112
<112
<55
>=186
>=167
>=127
>=100
<100
>=55
>=188
>=165
>=129
>=107
<107
RESULT
1
2
3
4
5
19
2012/3/2Ver1.1+V1.0
FEMALE
AGE
HEART RATE
<35
>=197
>=181
>=150
>=140
<140
<45
>=212
>=197
>=161
>=150
<150
<55
>=228
>=212
>=181
>=169
<169
>=55
>=238
>=223
>=197
>=181
<181
RESULT
1
2
3
4
5
z HRC Mode(need to wear wireless chest belt)
The purpose of this program is self-training based on heart rate. During the training, when
heart rate of runner achieves the setting number that you make, the LEVEL value will keep
within a certain range for best training effort.
1. The whole heartbeat control program has total four target pulse 65%, 75%, 85%, THR
(Target Heart Rate).
Calculate formula of heartbeat setting=(220-AGE)* heartbeat program control value
For example, age is 40，if the target pulse is 80% of maximum pulse, then the heartbeat
times:(220—40)×85%=153
2. Press
key to select this mode and press
special target heart rate. After selected, press
Press number instant key or
key to select
key to set target value:
to adjust WEIGHT, AGE and TIME parameters.
3. If you want to change the parameters, press
press
key to enter. Press
key to back to the first item to reset or
key to directly back to the start/ready status.
4. After setting the parameters or while setting parameters, press
or
key to
execute the program(The unset value will adopt the default value). The target parameter is
executed by countdown.
5. Under THR mode, the target heartbeat value will automatically calculate according to the
input age of users.
6. When no heartbeat value is detected, window will display NO PULSE. If no pulse is
detected in 45 seconds, it will back to start/ready mode.
7. During workout, RPM should within 70RPM~80RPM. If RPM is lower than 70RPM, the
window will display”RPM↑”to remind. If RPM is higher than 80RPM, the window will
20
2012/3/2Ver1.1+V1.0
display ”RPM↓”to remind.
8. HR CONTROL Mode：
Preset heartbeat control mode is 50W(Level2). When computer detects the pulse, the
heartbeat value will be judged every 10 seconds.
Judgment method of Heartbeat value as follows:
A. While running, program will compare actual heartbeat value with preset heartbeat
value. If actual heartbeat value ≦preset heartbeat value 15, WATT will increase
20 automatically, the highest can reach 400 WATT.
B. While running, program will compare actual heartbeat value with preset heartbeat
value. If actual heartbeat value ≦preset heartbeat value 5, WATT will increase 10
automatically, the highest can reach 400 WATT.
C. While running, program will compare actual heartbeat value with preset heartbeat
value. If actual heartbeat value ≧preset heartbeat value 5, WATT will decrease 10
automatically, the lowest can reach 50WATT.
D. While running, program will compare actual heartbeat value with preset heartbeat
value. If actual heartbeat value ≧preset heartbeat value 15, WATT will decrease
20 automatically, the lowest can reach 50WATT
9. While running, program will compare actual heartbeat value with preset heartbeat value. If
actual heartbeat value ≧preset heartbeat value 30, WATT will decrease down to
50WATT. The program will not carry out until actual heartbeat value ≦preset heartbeat
value 5.
10. This chart is about Age and Pulse Value (default value) for THR Function
Age
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
H
200
199
198
197
196
195
194
193
192
191
190
189
188
187
186
185
184
183
182
181
181
BPM
preset
126
125
125
124
124
123
122
122
121
121
120
119
119
118
118
117
116
116
115
115
114
L
126
125
125
124
124
123
122
122
121
121
120
119
119
118
118
117
116
116
115
115
114
Age
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
H
180
179
178
177
176
175
174
173
172
171
170
169
168
167
166
165
164
163
162
162
161
BPM
preset
113
113
112
112
111
110
110
109
109
108
107
107
106
106
105
104
104
103
103
102
101
21
L
113
113
112
112
111
110
110
109
109
108
107
107
106
106
105
104
104
103
103
102
101
Age
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
H
160
159
158
157
156
155
154
153
152
151
150
149
148
147
146
145
144
143
143
142
141
BPM
preset
101
100
100
99
98
98
97
97
96
95
95
94
94
93
92
92
91
91
90
90
90
L
101
100
100
99
98
98
97
97
96
95
95
94
94
93
92
92
91
91
90
89
89
Age
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
H
140
139
138
137
136
135
134
133
132
131
130
129
128
127
126
125
124
124
BPM
preset
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
L
88
88
87
86
86
85
85
84
83
83
82
82
81
80
80
79
79
78
2012/3/2Ver1.1+V1.0
z User Mode
1.
This mode will record the last state user entered. Press
mode and press
key to select this
key to enter. You can press MODE key again to adjust the
resistance from 1 to 32 level (press
to adjust from L1-L20) .The
corresponding light will flash during setting this level, then press
2.
3.
to
confirm and into next level setting. After finish setting 32 levels, press
key to
set time.
Setting time：(default value: 10 minutes；range: 0，10-60MIN). Time of each level
is the editing time divided 32 levels.
After setting the target time value or while setting parameters, press
or
key to execute the program(The unset resistance will adopt the default value:
LEVEL1 or the last LEVEL). Time is executed by countdown.
4.
If you want to change the parameters, press
reset or press
5.
key to back to the first item to
key to directly back to the start/ready status.
key to choose the desired LEVEL(According to the rotate
User can press
speed, the same LEVEL has different resistance feedback)
z Race Mode
1.
Press
key to select this mode and press
key into the target value setting:
It will ask user to set target distance(0.1、0.4、1.0、2.0、5.0、10.0 kilometers/miles)
to adjust. At the time,
and challenge time of target distance. Press
program will compute Pacer speed according to the editing value.
Computer Speed(Pacer Speed)=Target Distance/Target Time. Unit is
KM/HR(ML/HR)
2.
3.
4.
5.
Make sure the pacer speed is correct. Press
to start race. After showing3,2,1
on screen, user starts race with computer.
If the input value is invalid, user should adjust it again, otherwise, this mode can’t
be started.
Blue point represents user and red point represents computer in the playground. In
the bottom right corner of playground, it will show the distance that the computer is
ahead or behind user. User should reduce the his own resistance to catch up with or
overrun the computer(red bike image ).
When one of the players reaches the target distance, the program is over and the
22
2012/3/2Ver1.1+V1.0
computer will show the value.
z Program Mode
1. Press
key to select this mode and press
key to enter. Press
key again
to select special program:
User can select Rolling、Fat burn、Aerobic、Hill run、Hill climb and Hill intervals total
6 automatic Program mode.
key and user can press
2. After selected the program control, press
adjust the LEVEL. Total 10 levels of difficulty.
key to
3. After selected LEVEL, press
, at this time user can press
key to adjust
WEIGHT(Default value:70KG, Range: 23-180KG) and TIME(Default value: 10 MIN,
Range: 0，10-99MIN)
4. If you want to cancel the last parameter, press
reset or press
key to get back to the first item to
key to go back to the start/ready menu.
5. After setting the target time value or while setting the above parameters, press
or
key to execute the program(The unset resistance will adopt the default value:
LEVEL1 or the last LEVEL). Time is executed by countdown.
6. During workout, user can keep on using
are 8 levels.
23
to increase WORKOUT LEVEL. Total
2012/3/2Ver1.1+V1.0
◎Program Control Project Figure level
24
2012/3/2Ver1.1+V1.0
25
2012/3/2Ver1.1+V1.0
26
2012/3/2Ver1.1+V1.0
27
2012/3/2Ver1.1+V1.0
28
2012/3/2Ver1.1+V1.0
29
2012/3/2Ver1.1+V1.0
30
2012/3/2Ver1.1+V1.0
31
2012/3/2Ver1.1+V1.0
32
2012/3/2Ver1.1+V1.0
33
2012/3/2Ver1.1+V1.0
34
2012/3/2Ver1.1+V1.0
35
2012/3/2Ver1.1+V1.0