Samsung SGH-X100A User`s manual

* Some of the contents in this manual may differ from your
phone, depending on the software installed or your
service provider.
ELECTRONICS
World Wide Web
www.samsungmobile.com
Printed in Korea
Code No.: GH68-04738A
English. 1/2004. Rev. 1.0
DUAL BAND
GPRS TELEPHONE
SGH-X100A
Contents
Important Safety Precautions ...................... 7
Unpacking .................................................... 9
Your Phone ................................................ 10
Phone Layout ....................................................
Display.............................................................
Backlight ..........................................................
Service Light.....................................................
10
13
16
16
Getting Started .......................................... 17
Inserting/Removing the SIM Card ........................
Installing/Removing/Charging the Battery.............
Switching the Phone On or Off.............................
Selecting Functions and Options ..........................
Locking or Unlocking the Keypad .........................
17
18
22
23
25
Call Functions ............................................ 26
Making a Call ....................................................
Ending a Call.....................................................
Answering a Call................................................
Rejecting a Call .................................................
Adjusting the Volume .........................................
Accessing Options During a Call ...........................
Using the Ear-microphone...................................
26
29
29
29
29
30
36
Entering Text ............................................. 37
Changing the Text Input Mode ............................
Using Chinese Pinyin Mode..................................
Using Chinese Stroke Modes ...............................
Using Quick English Mode ...................................
Using English Mode ............................................
Using Number Mode...........................................
Using Symbolic Mode .........................................
38
39
41
43
45
47
47
Using the Menus......................................... 48
Accessing a Menu Function ................................. 48
List of Menu Functions........................................ 49
2
3
Contents
Contents
Phonebook Menu........................................ 55
Phone Settings......................................... 100
Find Name (Phonebook 1.1) .................................
Add Entry (Phonebook 1.2) ..................................
Speed List (Phonebook 1.3) .................................
Copy All to Phone (Phonebook 1.4) .......................
Delete All (Phonebook 1.5)...................................
Own Number (Phonebook 2.1) ..............................
Group Setting (Phonebook 2.2).............................
Memory Status (Phonebook 2.3) ...........................
Service Directory (Phonebook 3.1) ........................
Greeting Message (Menu 4.1) .............................
Display (Menu 4.2) ............................................
Auto Keylock (Menu 4.3) ....................................
Language (Menu 4.4) .........................................
Security (Menu 4.5) ...........................................
Auto Redial (Menu 4.6) ......................................
Anykey Answer (Menu 4.7) .................................
Auto Answer (Menu 4.8) .....................................
Fax Mode (Menu 4.9) .........................................
Service Light (Menu 4.10) ..................................
Reset Settings (Menu 4.11) ................................
55
58
59
61
62
63
64
65
65
Messages ................................................... 66
Short Message (Menu 1.1) ...................................
Multimedia Message (Menu 1.2) ...........................
Voice Mail (Menu 1.3) .........................................
Preset Messages (Menu 1.4) ................................
Broadcast (Menu 1.5) .........................................
Settings (Menu 1.6) ............................................
Memory Status (Menu 1.7) ..................................
66
73
84
85
85
87
90
Call Records ............................................... 91
Missed Calls (Menu 2.1) ......................................
Received Calls (Menu 2.2) ...................................
Dialled Calls (Menu 2.3) ......................................
Delete All (Menu 2.4) ..........................................
Call Time (Menu 2.5) ..........................................
Call Costs (Menu 2.6) .........................................
91
91
92
92
93
94
Sound Settings........................................... 95
Incoming Calls (Menu 3.1) ...................................
Messages (Menu 3.2) ..........................................
Power On/Off (Menu 3.3) ....................................
Connection Tone (Menu 3.4) ................................
Key Tone (Menu 3.5) ..........................................
Minute Minder (Menu 3.6) ...................................
Quiet Mode (Menu 3.7) .......................................
4
95
96
97
97
98
98
99
100
101
103
103
104
107
107
108
108
109
109
Organiser ................................................. 110
New Memo (Menu 5.1) .......................................
Calendar (Menu 5.2) ..........................................
To Do List (Menu 5.3) ........................................
Clock (Menu 5.4) ...............................................
Alarm (Menu 5.5) ..............................................
Calculator (Menu 5.6) ........................................
Conversion (Menu 5.7) .......................................
Timer (Menu 5.8) ..............................................
Stopwatch (Menu 5.9)........................................
110
112
115
116
118
120
121
122
123
Network Services ..................................... 124
Call Diverting (Menu 6.1) ...................................
Call Barring (Menu 6.2) ......................................
Call Waiting (Menu 6.3) ......................................
Network Selection (Menu 6.4) .............................
Caller ID (Menu 6.5) ..........................................
Active Line (Menu 6.6) .......................................
124
126
129
130
131
131
Fun Box.................................................... 132
WWW Services (Menu 7.1) ................................. 132
Media Box (Menu 7.2) ........................................ 138
JAVA World (Menu 7.3) ...................................... 140
5
Contents
Using ALS (Alternate Line Service) .......... 145
Solving Problems ..................................... 147
Access Codes ........................................... 150
Phone Password ...............................................
PIN.................................................................
PIN2 ...............................................................
PUK ................................................................
PUK2 ..............................................................
Call Barring Password........................................
150
150
151
151
152
152
Health and Safety Information ................. 153
Exposure to Radio-Frequency Energy
(SAR Information) ............................................
Precautions When Using Batteries .......................
Road Safety .....................................................
Operating Environment .....................................
Electronic Devices.............................................
Potentially Explosive Atmospheres ......................
Emergency Calls...............................................
Other Important Safety Information ....................
Care and Maintenance .......................................
153
154
156
158
158
160
161
162
162
Glossary ................................................... 164
Quick Reference Card ............................... 167
6
Important Safety
Precautions
Read these guidelines before using your wireless
phone. Failure to comply with them may be
dangerous or illegal.
Road Safety at All Times
Do not use a hand-held phone while driving; park
the vehicle first.
Switching Off When Refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switching Off in Aircraft
Wireless phones can cause interference. Using them
in aircraft is both illegal and dangerous.
Switching Off in Hospitals
Switch off your phone near medical equipment.
Follow any regulations or rules in force.
Interference
All wireless phones may be subject to interference,
which could affect their performance.
Special Regulations
Meet any special regulations in force in any area
and always switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger (in a hospital for example).
7
Important Safety Precautions
Unpacking
Sensible Use
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on,, especially the phone is in
service.
Your package contains the following items:
Emergency Call
Ensure the phone is switched on and in service. Key
in the emergency number for your present location,
then press the
key. If certain feature are in use,
you may need to deactivate those features before
you can make an emergency call. Give all the
necessary information as accurately as possible. Do
not end the call until given permission to do so by
the person on the other end of the phone.
Phone
Batteries
Travel Adapter
Manual
Water Resistance
Your phone is not water-resistant. Keep it dry.
Accessories and Batteries
Use only Samsung-approved accessories and
batteries.
Qualified Service
Only qualified service personnel should install or
repair your phone. Failure to do so may invalidate
the warranty.
Note: The items supplied with your phone may be
different depending on the country.
In addition, you can obtain the following
accessories for your phone from your local
Samsung dealer:
• Battery charger
• Simple hands-free kit
• Cigarette lighter adapter
For more detailed safety information, see “Health
and Safety Information” on page 153.
8
• Data kit
9
Your Phone
Your Phone
Key(s)
Phone Layout
The following illustrations show the main elements
of your phone.
Service light
Earpiece
Ear-microphone
jack
Display
(soft keys)
Description
Perform the functions indicated by the
text above them, on the bottom line of
the display.
In Menu mode, scroll through the
menu options.
In Idle mode, the Left key enters the
New SMS message writing screen,
the Right key enters the Incoming
call’s melody setting menu and the
Up key enters the Calendar menu.
The Down key enters the Java world
menu.
In Idle mode, launches the WAP
(Wireless Application Protocol) browser
directly.
Volume keys
Soft key (left)
Browser key
Dial/Menu
confirmation key
Cancel/Back/
Correction key
Navigation keys
(Up/Down/Left/
Right)
Soft key (right)
Power On/Off /
Menu exit key
Alphanumeric
keys
Special
function keys
Charger Connector
10
Microphone
Makes or answers a call.
In Idle mode, accesses the call log list.
In Menu mode, selects a menu
function or stores information that you
have entered, such as a name in the
phone or SIM memory.
Deletes characters from the display.
When pressed and held in Idle mode,
quickly accesses the New memo
screen.
In Menu mode, returns to previous
menu.
Ends a call.
When pressed and held, switches the
phone on and off.
In Menu mode, cancels your input and
returns to Idle mode.
11
Your Phone
Key(s)
Your Phone
Description (continued)
When pressed and held in Idle mode,
quickly accesses your voice mail
server.
Display
Display Layout
The display has three areas:
Enters numbers, letters and some
special characters.
Used for various purposes in different
functions.
When pressed and held while entering
a phone number, the
key enters a
pause.
When pressed and held in Idle mode,
the
key enters or exits the Quiet
Mode.
When pressed and held in Idle mode,
the
key enters or exits the Key Lock
Mode.
(on the left side of the phone)
During a call, adjusts the earpiece
volume.
In Idle mode, adjusts the key tone
volume.
When held down at an incoming call,
silence the ring tone.
12
Icons
Text and
graphic area
Menu
Phonebook
Soft keys
indications
Area
Description
First line
Displays various icons. See
page 14.
Middle lines
Display messages, instructions
and any information that you
enter, such as number to be
dialled.
Last line
Shows the functions currently
assigned to the two soft keys.
13
Your Phone
Icons
Icon
Icon
Description
Shows the received signal strength. The
more the number of bars, the stronger
the signal.
Appears when a call is in progress. When
your SIM card supports ALS (Alternate
Line Service), this icon may appears with
the number 1,2, or both.
For example
,
,
.
Appears when you are out of a service
area. When it displays, you cannot make
or receive calls.
Appears when you have new or
unchecked voice messages. When your
SIM card supports ALS (Alternate Line
Service), this icon may appears like
,
,
.
Appears when you have new or unread
messages.
Appears when you have new or
unchecked multimedia messages.
Appears when you are retrieving a
multimedia message.
Appears when you set the alarm(s) to ring
at a specified time.
Appears when the Call diverting feature is
activated.When you SIM card supports
ALS (Alternate Line Service), this icon
may appears with the number 1, 2, or
both. For example
,
,
.
14
Your Phone
Description
Appears when you are connected to the
GPRS network.
Appears when you are at the home zone.
(May be shown only if your service provider
supports this)
Appears when your are at the office zone.
(May be shown only if your service provider
supports this)
Appears when the keys are locked.
Appears when you set the alert type for
incoming calls to Vibration or Vibration
then melody. For further details, see
page 96.
Appears when the Quiet mode is active.
Shows the level of your battery. The more
bars you see, the more power you have
left.
Dimming Mode
If no key is pressed for given period of time which
you can set in the Phone setting menu option
(Menu 4.2.3), the backlight turns to dim to save
the power. Press any key to awake it from Dimming
mode.
Clock Mode
If no key is pressed for a minute in a Dimming
mode then it switches to the digital clock. Press any
key to awake the display from Clock mode.
15
Your Phone
Getting Started
Backlight
The display and the keypad are illuminated by a
backlight. When you press any key the backlight
illuminates. It turns off if no key is pressed within a
given period of time, depending on the Backlight
menu option. See page 102 for further details.
Note: The backlight remains on at all times when the
phone is connected to an optional car kit.
Service Light
The service light’s activity depends on the Service
light menu option. See page page 109. The colour
of service light is also selectable from the option.
The service light will also flash, when you set the
SMS message, MMS message and incoming call
alert to Light only.
Inserting/Removing the SIM Card
When you subscribe to a cellular network, you are
provided with a SIM card loaded with your
subscription details, such as your PIN, any optional
services available and so on.
• Keep all miniature SIM cards out of the reach of
small children.
• The SIM card and its data can be easily damaged
by scratches or bending, so be careful when
handling, inserting or removing the card.
• When installing the SIM card, always make sure
that the phone is switched off before you remove
the battery.
Inserting the SIM Card
1. If necessary, remove the battery by referring to
page 19.
2. Insert and slide the SIM card under the two
tabs, ensuring that the notched corner is top left
and the gold contacts of the card face into the
phone.
16
17
Getting Started
Removing the SIM Card
Getting Started
2. Slide the battery up towards the catch until it
locks into place.
To remove the SIM card, slide the card out of the
holder, as shown.
Removing the Battery
Installing/Removing/Charging the
Battery
Your phone is powered by a rechargeable Li-ion
battery. Use only approved batteries and chargers.
Ask your local Samsung dealer for further details.
1. Switch off the phone by pressing and holding the
key.
2. Press and hold down the catch above the battery
on the back of the phone and slide the battery
away.
Note: You must fully charge the battery before using
your phone for the first time. A discharged
standard battery is fully recharged in
approximately 120 minutes.
Installing the Battery
1. Place the battery back on the phone. Make sure
each side tab of the battery placed into
corresponding slot on the phone.
18
19
Getting Started
Charging the Battery by Using the Travel
Adapter
Note: The phone can be used while the battery is
being charged, but this causes the battery to
charge more slowly.
1. Plug the connector of the travel adapter into the
jack at the bottom of the phone. Check that the
arrow on the connector is facing towards the
front of the phone.
Getting Started
3. When charging is finished, disconnect the
adapter from the power outlet and from the
phone by pressing the grey tabs on both sides of
the connector and pulling the connector out.
➀
➁
➀
Low Battery Indicator
2. Plug the adapter into a standard AC wall outlet.
While charging, the battery icon at the top righthand corner of the display repeatedly fills to
show that the battery is charging.
20
When the battery is weak and only a few minutes of
talk time remain, the battery sensor informs you in
the following ways: an empty battery icon flashes
(
), you hear a warning tone and a message
repeats at regular intervals on the display.
When the battery becomes too weak for the phone
to operate, it switches off automatically.
21
Getting Started
Getting Started
Switching the Phone On or Off
Selecting Functions and Options
To switch the phone on:
Your phone offers a set of functions that allow you
to customise your phone. These functions are
arranged in menus and sub-menus, accessed via
the two soft keys marked
and
. Each menu
and sub-menu allows you to view and alter the
settings of a particular function.
1. Hold down the
on.
key until the phone switches
2. If the phone asks for a PIN, enter the PIN and
press the Ok soft key. For further details, see
page 150.
The phone searches for your network and the
current date and time appear on the display.
After finding, you can make or receive a call.
The roles of the soft keys vary according to the
current context; the labels or icons on the bottom
line of the display and just above the soft keys
indicate their current roles.
Example:
Service Provider
Web 17 Sep
12:53
Service Provider
Wed 17 Sep
12:53
Menu
Phonebook
Menu
Phonebook
Note: To change the language, use the
Language menu option (Menu 4.4).
For further details, see page 103.
To switch the phone off:
Hold down the
key until the power-off
animation displays.
Press the left soft
key to access the
menu functions.
Press the right soft
key to access the
Phonebook feature.
To view various functions/options available or select
the one is required:
22
23
Getting Started
Getting Started
Locking or Unlocking the Keypad
1. Press the appropriate soft key.
2. To
select the:
• function displayed
• option highlighted
Press the
Select soft key.
To lock the keypad manually, press and hold
key
in Idle mode until “Keypad locked” appears on the
display.
view the next function or Down key.
highlight the next option
on a list
move back to the
previous function or
option on a list
Up key.
move back up one level
in the structure
(or Back) soft key
or C key.
return to Idle mode
You can lock the keypad to avoid pressing keys by
mistake.
key.
To lock the keypad automatically, use the Auto key
lock option (Menu 4.3). See page 103.
In the Key Lock Mode, you can dial emergency calls
and answer incoming call using keypad. When you
end the call, your phone returns to the Key Lock
Mode after given period time.
To exit the Key Lock Mode, press the Unlock soft
key and then press the
key. “Keypad unlocked”
appears.
In some functions, you may be asked for a
password or PIN. Enter the required code and press
the Ok soft key.
24
25
Call Functions
Call Functions
Making an International Call
Making a Call
1. Press and hold the 0 key for the international
prefix. The + character appears.
Using the Number Keypad
2. Enter the country code, area code and phone
number and press the
key.
When the idle screen is displayed, enter the area
code and phone number, and press the
key.
Making a Call from Phonebook
Note: If you have set the Auto redial option (Menu
4.6) to On, the number is redialled
automatically up to ten times if the person you
called does not answer or the line is busy. For
further details, see page 107.
You can store the names and phone numbers called
regularly in the SIM card and phone’s memory,
which are jointly called the Phonebook. You then do
not need to remember all your numbers; simply
select the required name to recall the associated
number.
Correcting the Number
For further details about the Phonebook feature,
see page 55.
To clear
Press the
the last digit
displayed
C key.
any other digit in
the number
Left or Right key until the
cursor (|) is immediately to
the right of the digit to be
cleared and press the C key.
You can also insert a missing
digit simply by pressing the
appropriate key.
the whole digits
display
C key and hold it down for
more than one second.
Using the Call Logs
The phone stores up to 20 calls dialled, received or
missed chronologically. The last call is saved in the
first position. If the same number occurs more than
once, only the latest occurrence is saved.
To recall any of these numbers:
1. Press the
log list.
key in Idle mode to access the Call
2. Use the Up and Down keys to scroll through the
list until the number you want is highlighted.
The call logs are listed with the following icons:
26
•
: Dialled calls
•
: Received calls
•
: Missed calls
27
Call Functions
3. To dial the number, press the
Call Functions
key.
To view each call record, see “Call Records” on
page 91.
Ending a Call
When you want to finish your call, briefly press the
key.
Viewing Missed Calls
If you have a subscription that includes the Caller
Line Identification (CLI) feature and you are unable
to answer a call for any reason, you can find out
who was calling you so that you can call the person
back.
The number of missed calls is displayed on the idle
screen immediately after a call was missed.
To view the missed calls immediately:
1. Press the View soft key.
The list of the missed calls displays.
2. If necessary, scroll to the number you want by
pressing the Up or Down key.
3. To dial the number, press the
key.
To use the missed call options, see “Missed Calls”
on page 91.
Note: To clear the missed call notification on the
key.
display, press the
Answering a Call
When somebody calls you, the phone rings and
displays the incoming call animation.
If the caller can be identified, the caller’s phone
number, or name if stored in your Phonebook, is
displayed.
To answer a call, press the
key.
key or Accept soft
Note: You can answer a call while using the
Phonebook or menu features. The current
operation stops.
Rejecting a Call
To reject an incoming call, press the
Reject soft key.
key or
Speed-Dialling from Phonebook
Adjusting the Volume
Once you have stored numbers in the Phonebook,
you can dial a number simply by pressing one or
two keys. For further details, see page 59.
During a call, if you wish to adjust the earpiece
volume, press the up or down volume key on the
left side of the phone.
When you hear a sound, such as ringtone, you can
also adjust the earpiece volume. But it is not fixed.
28
29
Call Functions
Accessing Options During a Call
Your phone provides a number of control functions
that you can use during a call.
Call Functions
To communicate with answering machines or
computerised telephone systems, the Send keys
option must be selected.
Putting a Call on Hold
Switching the Microphone Off (Mute)
You can temporarily switch your phone’s
microphone off so that the other person cannot
hear you.
Example: You may wish to say something to
another person in the room but do not
want the calling person to hear you.
1. Press the Options soft key.
2. When Mute highlights, press the Select soft
key.
The Mute icon (
) appears on the bottom line
of the display and your correspondent can no
longer hear you.
To switch the microphone back on:
1. Press the Options soft key.
2. When Unmute highlights, press the Select soft
key.
The Mute icon disappears and your
correspondent can hear you.
Muting/Sending Key Tones
You can turn the key tones off or on during a call.
When the Mute keys option is selected, your phone
does not transmit the key tones. It allows you to
press keys without hearing annoying key tones
during a call.
30
You can place the current call on hold whenever you
want. You can make another call while you have a
call in progress if this service is supported by the
network. Of these two calls, one is active and the
other is on hold and you can switch between the
calls.
To place a call on hold, simply press the Hold soft
key. You can reactivate the call whenever you want
by pressing the Retrieve soft key.
To make a call while you have a call in progress:
1. Enter the phone number that you want to dial or
look it up in Phonebook.
2. Press the
key to dial the second call.
The first call is automatically put on hold.
Or alternatively:
1. Put the current call on hold by pressing the Hold
soft key.
2. Make the second call in the normal way.
To switch between the two calls, simply press the
Swap soft key.
The current call is placed on hold and the call on
hold is reactivated so that you can continue
conversing with the other person.
To end the call on hold, press the Options soft key
and select the End held call option.
When you want to finish, end each call normally by
pressing the
key.
31
Call Functions
Call Functions
Answering a Second Call
Searching for a Number in Phonebook
You can answer an incoming call while you have a
call in progress, if this service is supported by the
network and you have activated the Call waiting
option (see page 129). You will be notified of an
incoming call by a call waiting tone.
You can search for a number in your Phonebook
during a call.
1. Press the Options soft key.
To answer a call while you have another call in
progress:
2. If necessary, press the Up or Down key to
highlight the Phonebook option. Press the
Select soft key.
1. Press the
key to answer the incoming call.
The first call is automatically put on hold.
3. Select the Find name option and press the
Select soft key.
2. To switch between the two calls, press the Swap
soft key.
3. To end the call on hold, press the Options soft
key and select the End held call option.
To end the current call, press the
key.
The call on hold is automatically reconnected to
you.
Transferring a Call
The Phonebook entries are listed.
Enter the first few letters of the name that you
want to find.The Phonebook entries are listed
starting with the first entry matching your input.
Note: You can also scroll through the Phonebook
from the beginning, by pressing the Up or
Down key.
4. To view the highlighted entry, press the Ok soft
key.
You can transfer the current call to the call on hold
if this service is supported by the network, so that
the callers can talk to each other. You are
disconnected from both of them.
For further details about the Phonebook feature,
see page 55.
1. During a call, answer or make a call in the
normal way, and press the Options soft key.
You can read or write a new message during a call.
2. Press the Up or Down key to select the Transfer
option and press the Select soft key.
The two people are connected to each other.
Using the Message Service
1. Press the Options soft key.
2. Press the Up or Down key to highlight the
Message option. Press the Select soft key.
3. To read a received message, select the Inbox
option, and then scroll to the message that you
want to read.
32
33
Call Functions
To write a new message, select the New
message option.
4. Press the Select soft key.
For further details about the SMS feature, see
page 66.
Making a Multi-party Call
A multi-party call feature is a network service that
allows up to six people to take part simultaneously
in a multi-party or conference call. For more
information, contact your service provider.
Setting up the Multi-party Call
1. Call the first participant in the normal way.
2. Call the second participant in the normal way.
The first call is automatically put on hold.
3. To join the first participant to the multi-party
call, press the Options soft key and select the
Join option. Press the Select soft key.
4. To add a new person to the multi-party call, call
the person in the normal way. Then press the
Options soft key and select the Join option.
Press the Select soft key.
You can add incoming callers by answering the call
and selecting the Join option. Repeat as needed.
Having a Second Call During a Multi-party Call
To answer or make a call when you have the multiparty call:
1. To place the multi-party call on hold, press the
Hold soft key.
34
Call Functions
2. Answer or make a call in the normal way.
3. You can reactivate the call on hold by pressing
the Retrieve soft key.
To end the multi-party call on hold, press the
Options soft key and select the End held
multiparty option.
To answer an incoming call when you have a multiparty call in progress and a call on hold:
1. Press the Accept soft key.
2. Select the End held option to end the call on
hold.
Or, select the End current option to end the call
in progress.
3. Answer the new call by pressing the
key.
Having a Private Conversation With One
Participant
1. Press the Options soft key and select the Split
option. Press the Select soft key.
2. Press the Up or Down key to highlight a
participant and press the Select soft key.
Now you can talk privately with that person. The
other participants can continue to converse with
each other.
3. To return to the multi-party call, press the
Options soft key and select the Join option.
4. Press the Select soft key.
All of the multi-party call participants can now
hear each other.
35
Call Functions
Entering Text
Removing One Participant
1. Press the Options soft key and select the
Remove option.
2. Press the Up or Down key to highlight a
participant and press the Select soft key.
The call ends with that participant, but you can
continue to talk with the other participants.
3. End the multi-party call by pressing the
key.
The phone allows you to enter characters for
messages and names in Chinese and English. To
enter Chinese text, the phone provides several
widely used pronunciation based (Pinyin) and
character shape based (Stroke) input methods to
meet the preferences of different users, allowing for
greater convenience and ease of use
You can also enter any combination of Chinese
characters, alphabets, numbers, and special
symbols including punctuation marks
• Pinyin mode
Using the Ear-microphone
With the ear-microphone, you can make or answer
a call without holding the phone.
When you connect the ear-microphone to the jack
at the left side of the phone, the button on the earmicrophone works as listed below:
• Chinese Simplified Stroke mode
• Quick English mode (T9 mode)*
• English mode
• Malay mode
• Chinese Traditional Stroke mode
• Number mode
To
Press
• Symbolic mode
redial the last call
the button twice in Idle
mode.
• Add word mode
answer a call
and hold the button when
you receive the call.
end a call
and hold the button when
you have finished the call.
Directions for using each of the text input modes
appears later in this section.
*
36
is a registered Trademark of Tegic Communications,
Inc. and is licensed under U.S. Patent 5,818,437/
5,953,541/6,011,554.
37
Entering Text
Entering Text
Changing the Text Input Mode
Using Chinese Pinyin Mode
When you are in a field that allows characters to be
entered, you will see the text input mode indicator
at the bottom of the display.
Pinyin is a system to mark Chinese pronunciation in
Latin alphabets. With the pinyin input method, you
can enter Chinese characters by entering the pinyin
string from the phone keypad and the phone
automatically presents the matching alternatives.
Example: Entering a name in Phonebook
This mode allows you to enter Pinyin characters
with only one key press per letter.
Enter name
Typing Characters in Pinyin Mode
Ok
9
PY
Text input mode
indicator: Chinese
Pinyin mode
To change to another text input mode:
1. Press the right soft key indicating the current
text input mode.
1. Press keys corresponding to the phonetic
spelling, referring to the Roman letters printed
on the keys. Notice that the choices in the
Character Selection Map change.
Example: Typing “
Enter name
Text Area
2. Scroll to the mode you want to use by pressing
the Up or Down key.
Key Stroke Area: press
the 5 and 4 keys to
enter “li.”
Character Selection Map
You can use the Add word option to add new
words into t9 dictionary. see page 43.
Ok
Note: If you want to exit the menu without
changing the mode, press the
soft key or
key.
3. Press the Select soft key to confirm the
highlight text input mode.
Note: If you want to exit the menu without changing
to a new mode, press the right soft key.
” in Pinyin mode
PY
2. If there are more than one pinyin spelling
corresponding to your keypress, press the Left
or Right key to select the spelling you want.
3. If you cannot find the character you want from
the display, press the Up or Down key to scroll
through choices in the Character Selection map.
4. The selected text input mode indicator appears
at the bottom of the display.
38
39
Entering Text
Entering Text
When the character you are typing appears in
the Character Selection Map, you may select it.
without completing the Pinyin spelling or
entering the tone for the character.
4. To select a character, press the 1 key to activate
the Character Selection Map. A number, 1 to 5,
is added to the beginning of a corresponding
character. With the Character Selection Map
being activated, a normal press on the 1 to 5
key selects the corresponding character.
Enter name
Clearing Strokes and Characters
Press the C key or more times to remove strokes to
the left. Once the Pinyin Area is empty, pressing the
C key removes characters from the Text Area.
Using Chinese Stroke Modes
These modes allow you to enter individual Chinese
strokes, in written order; from top to bottom, and
from left to right. Your phone provides Chinese
Simplified Stroke mode and Chinese Simplified
Stroke mode.
The two modes work similarly, but the characters
that appear on the display.
Ok
PY
Press the 3 key
to enter “
.”
Notes:
• To insert a space when entering a text, press the
key when the cursor blinks in the Text Area.
• To remove the activate character in the Character
Selection Map, press the C key.
Even though there are many different strokes used
to create Chinese characters, the strokes are
classified into 5 basic categories; heng, shu, pie,
dian and zhe. The basic strokes are printed on the
keypad, on the 1 to 5 keys.
To enter a stroke, press the key printed with the
printed with the stroke that most closely represents
the exact stroke you want.
The table shows the stroke/key relationship:
Scrolling
To move the cursor left or right through your text
message, press the Left or Right key.
Inserting a Space
Insert a space between the characters, press the
key in the Text Area.
40
41
Entering Text
Entering Text
Typing Strokes and Characters in Stroke
Mode
1. To type a character, press keys corresponding to
its component strokes. Press keys on the
handset in the order that you would write the
strokes, using one press per each stroke.
” in Chines Traditional
Example: Typing “
Stroke mode
Selection map correspond to keys 7 to 0 on the
keypad. To select a character from the Character
Selection Map and add it to your message, press
the corresponding key 7 to 0.
Scrolling
To move the cursor left or right through your text
message, press the Left or Right key.
Clearing Strokes and Characters
9
Press the 5 key to enter
“ ,”and then the 3 key
to enter “
.”
2. The phone displays your strokes in the Key
Stroke Area and offers character choices in the
Character Selection Map. As you enter strokes,
notice that the choices in the Character
Selection Map change.
To scroll through choices in the Character
Selection Map, press the Up or Down key.
Note: If you are uncertain of the order of one or
more strokes, press the 6 key in place of
each questionable stroke. Continue entering
strokes until the character is displayed in
the Character Selection Map or until you
have finished the character.
3. When the character you are typing appears in
the Character Selection Map, you may select it
without finishing the stroke sequence for the
character. Characters displayed in the Character
42
Press the C key one or more times to remove
strokes to the left. Once the Stroke Area is empty,
pressing the C key removes characters from the
Text Area.
Using Quick English Mode
To type a word, press keys corresponding to the
letters you need. Remember the following as you
are typing:
1. Start entering the word by pressing keys 1 to 0.
Press each key only once for each letter.
Example: To enter “hello” in Quick English
mode, press the 4, 3, 5, 5, and 6
keys.
The word you are typing appears on the display.
It may change with each key that you press.
2. Enter the whole word before editing or deleting
any keystrokes.
3. If the word is correct, start entering the next
word. Otherwise, press the 0 key repeatedly to
43
Entering Text
Entering Text
display alternative word choices for the keys
that you have pressed.
Changing the Case
Example: Both “of” and “me” have the sequence
of 6 and 3. The phone displays the
most commonly used choice first.
4. Insert a space between words by pressing the
key.
If Spell appears above the left soft key while you
are entering text, the word does not exist in the T9
dictionary. To type words not found in Quick English
mode, change the text input mode to English mode,
or proceed as follows:
1. Press the Spell soft key, or press the right soft
key and select the Add word option.
2. Enter the word you want to add using English
mode (see page 45) and press the Ok soft key.
The word is saved in the T9 dictionary and
inserted in the input field.
3. Continue entering other words in Quick English
mode.
Smart Punctuation
To enter periods, hyphens or apostrophes, press the
1 key. T9 mode applies rules of grammar to insert
the correct punctuation.
Example: The 1 key is used twice to display two
punctuation marks.
l
44
e
t
‘
s
e
a
t
.
To shift the case of the next letter(s) that you type,
press the
key. There are three cases; Lower
Case, Initial Capital and Capital Lock.
Scrolling
• To move the cursor to the left or right within the
text, press the Left or Right key.
• To scroll through alternative word choices for the
keys you have entered, press the 0 key.
Clearing Letters and Words
Press the C key one or more times to clear letters to
the left. Press and hold the key to clear the display.
Using English Mode
When typing in English mode, press the key labelled
with the required letter:
- Once for the first letter
- Twice for the second letter
- And so on
Example: To display the letter “C”, quickly press the
2 key three times. To display the letter
“K”, press the 5 key twice. This method is
called Multi-tap typing.
Note: The cursor moves to the right when you press a
different key. When entering the same letter
twice or a different letter on the same key, just
wait a few seconds for the cursor to move to
the right automatically, and then enter the next
letter.
45
Entering Text
Entering Text
Refer to the table below for more information about
the characters available:
Key
Characters in the Order Displayed
Upper case
Lower case
Using Number Mode
Number mode enables you to enter numbers in
your text. Press the keys corresponding to the
digits you want to enter.
Using Symbolic Mode
Symbolic mode enables you to enter symbols in
your text.
Changing the Case
To shift the case of the next letter(s) that you type,
press the
key. There are three cases; Lower
Case, Initial Capital and Capital Lock.
To
Press the
display more
symbols
Up or Down key.
enter a symbol
corresponding number key.
return to the
Ok or
previous text input
mode
soft key.
Inserting a Space
To insert a space between the words, press the
key.
Scrolling
To move the cursor to the left or right within the
text, press the Left or Right key.
Clearing Letters and Words
Press the C key one or more times to clear letters to
the left. Press and hold the key to clear the display.
46
47
Using the Menus
Using the Menus
The phone offers a range of functions that allow you
to tailor the phone to your needs. These functions
are arranged in menus and sub-menus.
You can also access the menus and sub-menus by
entering the corresponding menu number.
Example: To access the Voice mail menu option,
press the Menu soft key, 1, 3 in Idle
mode.
Accessing a Menu Function
The menus and sub-menus can be accessed by
pressing the Menu soft key or Phonebook soft key
in Idle mode, then scrolling with the navigation
keys.
1. In Idle mode, press the Menu to access the
main menu or press the Phonebook soft key to
access Phonebook menu.
2. Scroll through the menus using the Left or Right
key.
3. Find the sub-menu that you wish to use by
scrolling with the Up or Down key.
4. Press the Select soft key to access the submenu.
If the menu that you have selected contains
further sub-menus, repeat steps 3 and 4.
5. Scroll to the option you want to choose with the
Up or Down key.
6. Press the Select soft key to choose the setting.
Note: You can return to the previous menu level by
pressing the
soft key.
List of Menu Functions
Various menus let you check or change your phone
settings. The following list shows the menu
structure.
The numbers assigned to each menu option may
not match the menu number on the phone. It
depends on the services supported by your SIM
card.
Phonebook Menu
1. Phonebook
1.1
1.2
1.3
1.4
1.5
(see page 55)
Find name
Add entry
Speed list
Copy all to phone
Delete all
2. Management
(see page 63)
2.1 Own number
2.2 Group setting
2.3 Memory status
3. Services
(see page 65)
3.1 Service directory
48
49
Using the Menus
Using the Menus
Main Menu
1. Messages
2. Call records
(see page 66)
1.1 Short message
1.1.1 Inbox
1.1.2 New message
1.1.3 Outbox
1.1.4 Delete all
1.2 Multimedia message
1.2.1 Inbox
1.2.2 New message
1.2.3 Outbox
1.2.4 Draft
1.2.5 My folder
1.2.6 Delete all
1.3 Voice mail
1.3.1 Connect to voice mail
1.3.2 Voice server number
1.4 Preset messages
1.5 Broadcast
1.5.1 Read
1.5.2 Receive
1.5.3 Channel
1.5.4 Language
1.6 Settings
1.6.1 Short message
1.6.2 Multimedia message
1.7 Memory status
1.7.1 Short massage
1.7.2 Multimedia message
(see page 91)
2.1
2.2
2.3
2.4
2.5
Missed calls
Received calls
Dialled calls
Delete all
Call time
2.5.1 Last call time
2.5.2 Total sent
2.5.3 Total received
2.5.4 Reset timers
2.6 Call costs*
2.6.1 Last call cost
2.6.2 Total cost
2.6.3 Max cost
2.6.4 Reset counters
2.6.5 Set max cost
2.6.6 Price/Unit
3. Sound settings
(see page 95)
3.1 Incoming calls
3.1.1 Default melodies
3.1.2 My sounds
3.1.3 Ring volume
3.1.4 Alert type
3.2 Messages
3.2.1 Short message
3.2.2 Multimedia message
3.3 Power on/off
3.4 Connection tone
3.5 Key tone
3.6 Minute minder
3.7 Quiet mode
* Shown only if supported by your SIM card.
50
51
Using the Menus
4. Phone settings
Using the Menus
(see page 100)
4.1 Greeting message
4.2 Display
4.2.1 Wallpaper
4.2.2 Skin
4.2.3 Backlight
4.2.4 LCD contrast
4.3 Auto keylock
4.4 Language
4.5 Security
4.5.1 PIN check
4.5.2 Change PIN
4.5.3 Phone lock
4.5.4 Change password
4.5.5 Privacy
4.5.6 SIM lock
4.5.7 FDN mode*
4.5.8 Change PIN2*
4.6 Auto redial
4.7 Anykey answer
4.8 Auto answer
4.9 Fax mode
4.10 Service light
4.11 Reset settings
4.11.1 Sound settings
4.11.2 Phone settings
4.11.3 All settings
* Shown only if it is supported by your SIM card.
52
5. Organiser
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
(see page 110)
New memo
Calendar
To do list
Clock
5.4.1 Set
5.4.2 Set
5.4.3 Set
5.4.4 Set
Alarm
Calculator
Conversion
Timer
Stopwatch
time
date
world time
format
6. Network services
(see page 124)
6.1 Call diverting
6.1.1 Divert always
6.1.2 Busy
6.1.3 No reply
6.1.4 Unreachable
6.1.5 Cancel all
6.2 Call barring
6.2.1 All outgoing
6.2.2 International
6.2.3 International except to home
6.2.4 All incoming
6.2.5 Incoming while abroad
6.2.6 Cancel all
6.2.7 Change barring password
6.3 Call waiting
6.3.1 Voice calls
6.3.2 Fax calls
6.3.3 Data calls
6.3.4 Cancel all
6.4 Network selection
6.5 Caller ID
6.6 Active Line*
* Shown only if it is supported by your SIM card.
53
Using the Menus
Phonebook Menu
7. Funbox
(see page 132)
7.1 WWW services*
7.1.1 Home
7.1.2 Bookmark
7.1.3 Go to URL
7.1.4 Clear cache
7.1.5 Proxy settings
7.1.6 Current proxy
7.1.7 Push messages
7.2 Media box
7.2.1 Images
7.2.2 Sounds
7.2.3 Delete all
7.2.4 Memory status
7.3 JAVA world
7.3.1 Downloads
7.3.2 DNS setting
7.3.3 Memory status
8. SIM AT
**
Phonebook offers the following features:
• Phonebook: allows you to find, create or set up
the speed-dialling feature and manage
Phonebook entries.
• Management: allows you to create or remove
your own number, set up caller groups and check
the memory status.
• Services: allows you to use the service directory
depending on your SIM card.
Find Name
(Phonebook 1.1)
To search for a number in the phonebook, proceed
as follows.
1. Enter a letter(s) of the name that you want to
find.
The Phonebook entries are listed, highlighting
the entry matching your input.
2. If necessary, press the Up or Down key to scroll
to the entry you want.
3. Once you have found the entry, press the Ok
soft key.
4.
To
dial the displayed
number
Press the
key.
* May not be shown or supported by your network service provider.
**Shown only if it is supported by your SIM card.
54
55
Phonebook Menu
4.
Phonebook Menu
To
Press the
change the
Phonebook entries
Options soft key. For
further details, see the
page 56.
The following options are available:
Edit number
This option allows you to change the number. You
can also add a new number if none has been stored
for the selected category.
Changing the Phone Memory Entries
Change name
Scroll to the category that you want to edit by
pressing the Left or Right key. Following categories
are available and you can edit information of each
category by pressing the Options soft key.
This option allows you to change the name of the
entry.
Category Options
Mobile
Home
Office
Fax
Other
Select one of the following options. For
details for these options, refer to the
page 57.
Edit number
Change name
Send message (shown if the category
contains a number)
Copy (shown if the category contains a
number)
Delete entry
E-Mail
Enter or edit e-mail address
Group
Set one of the groups or no group
Graphic
Set one of the images or no image
Alert
Set one of the melody or not assign
To clear the old name, press the C key. For more
information about how to enter characters, see
page 37.
Send message
This option allows you to send a message to the
number. For more information about how to send a
message, see page 66.
Copy
This option allows you to copy the entry from the
phone’s memory to the SIM card, and vice versa.
Delete entry
This option allows you to delete the entry from
Phonebook. To confirm the deletion, press the Yes
soft key. Otherwise, press the No soft key.
Changing the SIM Memory Entries
To change the SIM memory entry’s information,
press the Options soft key.
56
57
Phonebook Menu
Add Entry
(Phonebook 1.2)
You can store phone numbers and the
corresponding names in the memory of your SIM
card. In addition, you can store up to 1000 names
in the phone memory and each name can be
associated with up to five numbers.
1. Enter the number you want to save.
Notes:
• If you make a mistake while entering a number,
correct it using the C key. For further details, see
page 26.
• To insert a dialling pause for special phone
services, such as banking by phone, hold down
the
key. “P” is displayed to indicate the pause.
Phonebook Menu
6. When you are satisfied, press the OK soft key.
7. If you select Phone in step 3, go to step 8.
If you select SIM in step 3, enter the location
number and press the Ok soft key.
8. If you want to change the entry, use the options.
for information about how to do it, see
ppage 56.
If you want to return to Idle mode, press the
soft key or the
key.
Storing a Number in Idle Mode
As soon as you start to enter a number, Save
appears above the left soft key to allow you to store
the number in Phonebook.
2. When you are sure that the number is correct,
press the Save soft key.
Continue the procedure from step 1 on page 58 to
store the number.
3. Select the memory where the number is to be
stored, either Phone or SIM, and press the
Select soft key.
Speed List
Note: If you change phones, any numbers stored
in your SIM card will automatically be
available with the new phone, whereas any
numbers stored in the phone’s memory
must be stored again.
(Phonebook 1.3)
You can set up to eight speed-dial entries and then
dial them easily whenever you want, simply by
pressing the associated number key.
Setting Up Speed-dial Entries
4. If you select SIM in step 3, go to step 5.
If you select Phone in step 3, choose a number
type using the Up or Down key and press the
Select soft key.
5. Enter the associated name.
1. Press the Up or Down key to scroll to an empty
location and press the Select soft key.
2. When the Edit number option highlights, press
the Select soft key.
For information about how to enter characters,
see page 37.
58
59
Phonebook Menu
Phonebook Menu
3. Enter a phone number and press the Ok soft
key. Or,
To retrieve a number from your Phonebook,
press the Phonebook soft key. Select an entry
from the list and press the Ok soft key. Press
the Ok soft key to save it.
4. When you have finished, press the
the
key to exit.
soft key or
Dialling a Number Stored in the SIM Card
Once you have stored phone numbers in your SIM
card, you can dial them easily whenever required.
To dial a number stored in the SIM card:
1. Enter the number of the SIM card location where
the number you want to dial is stored.
2. Press the
key.
The display shows the name and number stored
in that location.
Editing the Speed-dial Entries
1. Select the speed-dial entry you want to edit
from the list and press the Select soft key.
3. Press the Dial soft key or the
2. Select one of the following menu options by
pressing the Up or Down key and press the
Select soft key:
Copy All to Phone
• Edit number: allows you to change the
number.
• Change name: allows you to change the
name of the entry.
• Delete: allows you to clear the setting so that
no number is assigned to the key.
3. When you have finished, press the
the
key to exit.
soft key or
Using the Speed-dial Feature
key.
(Phonebook 1.4)
You can copy all of the numbers stored in the SIM
card to the phone’s memory.
1. When a confirming message appears, press the
Yes soft key to copy.
The number are copied to the phone’s memory,
labelled with Mobile by default.
Otherwise, press the No soft key.
2. When you have finished, press the
the
key to exit.
soft key or
When the idle screen is displayed, press the number
key, 2 to 9, assigned to the speed-dial entry and
press the
key. You can also press and hold the
number key.
Note: The 1 key is reserved for your voice mail server
number.
60
61
Phonebook Menu
Delete All
(Phonebook 1.5)
You can delete Phonebook entries selectively
depending on the memory location, or all entries at
once.
1. Scroll to the desired memory and place a check
mark ahead of it by pressing the Select soft
key.
Selecting All places check marks on all of the
memories.
2. If necessary, repeat step 1 to check another
options.
Phonebook Menu
Own Number
(Phonebook 2.1)
To store your own phone number(s) with a name:
1. Scroll to an empty location by pressing the Up or
Down key and press the Select soft key.
2. When Edit number highlights, press the Select
soft key.
3. Enter your number and press the Ok key.
4. To assign a name, press the Down key to move
to Change name and press the Select soft key.
5. Enter a name and press the Ok soft key.
3. When you have finished checking, press the Ok
soft key.
4. When a confirming message appears, press the
Yes soft key to delete all of the entries in the
memory(ies). Then enter the phone password
and press the Ok soft key. The password is
preset to “00000000” by default. To change it,
see page 105.
Otherwise, press the No soft key.
6. When you have finished, press the
the
key to exit.
soft key or
To remove one of your numbers:
1. Select the entry you want to delete from the
Own number list and press the Select soft key.
2. Scroll to Delete by pressing the Up or Down key
and press the Select soft key.
3. When a confirming message appears, press the
Yes soft key to delete the number.
Otherwise, press the No soft key.
4. When you have finished, press the
the
key to exit.
62
soft key or
63
Phonebook Menu
Group Setting
Phonebook Menu
Memory Status
(Phonebook 2.2)
You can change the settings of the five predefined
caller groups.
1. Select a caller group by pressing the Up or Down
key and press the Select soft key.
(Phonebook 2.3)
You can check how many names and numbers are
stored in Phonebook, SIM card and phone’s
memories, and how many free locations remain.
When you have finished, press the
the
key to exit.
soft key or
2. Scroll to a setting option by pressing the Up or
Down key and press the Select soft key.
The following options are available:
Service Directory
• Melody: allows you to select a melody to
sound when a call comes in from a member in
the group.
Note: This feature may not be available depending on
your SIM card.
• Change name: allows you to change the
name of the group; for further details about
how to enter characters, see page 37.
• View image: shows the image to display
when a call comes in from a member in the
group.
(Phonebook 3.1)
The display shows the list of the numbers in the
Service Directory.
If necessary, scroll to a number by pressing the Up
or Down key and press the
key to dial the
number.
3. Change the setting as required and press the
Select soft key.
4. Repeat steps 1 and 3 to change other options.
When you have finished, press the
the
key to exit.
64
soft key or
65
Messages
Messages
This menu allows you to create, send, read and
save messages with the Short Message Service
(SMS: text message), Enhanced Message Service
(EMS: message including simple image, animation
or melody) and Multimedia Message Service
(MMS: message supporting the presentation of
various media types, such as full colour images and
polyphonic ring tones). Voice mails are also
available.
Note: This feature is only available if your service
provider’s network supports it. Contact your
service provider for more information.
Short Message
(Menu 1.1)
Short message service (SMS) allows you to send
and receive short text messages to and from other
GSM mobile phones. In addition, your phone
supports the Enhanced Messaging Service (EMS),
which enables you to make short messages
consisting of simple pictures, melodies, animations
and styled text all of which adds a new dimension to
simple text messages.
To send text messages by phone, you must obtain
the number of the SMS centre from your service
provider.
Receiving a new message
When you receive a new message, the New
message icon (
) and a text notification showing
the number of the message appear on the display.
You also hear an alert, depending on the message
sound setting; for further details, see page 96.
66
To read the new message(s) immediately, press the
View soft key. The list of the messages appears.
Note: To clear the new message notification on the
key.
display, press the
Managing memory
Inbox and Outbox share a given amount of memory
in your phone or SIM card. When the message
memory is full, the New message icon (
) blinks
and an error message displays. (It disappears when
you press the
key, but it reappears if you don’t
delete old messages.) In this case, you cannot
receive any new messages. You must delete one or
more old messages to get free memory for new
messages using the Delete option within Inbox or
Outbox or the Delete all option; for further details,
see page 72.
Inbox (Menu 1.1.1)
Your phone receives incoming messages and saves
them in Inbox. SMS is usually saved in the SIM
card, but if the SIM memory is full, the incoming
messages will be saved in the phone’s memory.
When the Inbox menu is selected, the list of
messages received displays with the:
• sender’s phone number, or name if stored in
Phonebook.
• message status;
for a read message,
message to read or
for an incomplete
message.
for a
67
Messages
To view a message, scroll to it and press the Select
soft key. The screen shows the:
Messages
New Message (Menu 1.1.2)
• date and time when the message was received.
Using this menu, you can write messages,
containing text, images and melodies.
• memory where the message was stored;
for
the SIM card or
for the phone’s memory.
1. Create a message.
• message contents.
You can scroll to the next or previous message by
pressing the Left or Right key.
To scroll through the message contents, press the
Up or Down key. When you focus on an object that
includes a melody, the melody is played.
You can choose the following options by pressing
the Options soft key:
Delete: allows you to delete the message.
Message reply: allows you to reply by sending a
message.
Call back: allows you to call the sender back.
Cut address: extracts phone numbers, email
addresses or URL addresses in the text, so that you
can call the number or send a message to the
number or save it in your Phonebook.
Send: allows you to send the message to another
person.
Edit: allows you to edit the message.
Extract media: you can save media (except the
predefined EMS animations and sounds) from the
message into Media box. You can use these items
when writing a message; for further details, see
below.
On the first line of the display, you see the
number of remaining characters you can enter,
the number of current message and the
maximum messages you can create, and the
font style you set in Text option.
Note: For further information about how to enter
characters, see page 37.
2. While entering your message, press the
Options soft key to use the following options.
• Send: allows you to send the message. Refer
to the next step.
• Text: allows you to format the text. Following
text attributes can all be combined as
required.
Text size: Small/Medium/Large
Text mode: Normal/Underscore/Strikethrough
Bold: On/Off
Italic: On/Off
Alignment: Left/Center/Right
Note: The text attributes you can use are different
depending on whether you are entering
English or Chinese.
• Add media: allows you to add pictures,
animations and/or melodies to the message.
Transfer: allows you to transfer the message from
the SIM card to the phone’s memory.
68
69
Messages
Messages
• Select a category; Add picture, Add
animation or Add melody. You can then
choose a factory-set object or an object that
you have received from another source and
stored in the Media box. See page 138.
Note: When the phone fails to send the message,
press the Retry soft key to try again the
transmission. Or, press the No soft key and the
Save soft key to save the message or exit the
menu by pressing the No soft key.
• Preset messages: allows you to add a preset
message to your text. Select one of nine
messages stored in the Preset messages
menu option (Menu 1.4). See page 85.
Outbox (Menu 1.1.3)
• Save message: allows you to save the
message so that it can be sent later. You can
read the message in Outbox.
3. When you have finished entering your message,
choose Send from the options.
4. Enter a destination number on the Address
screen.
Outbox stores any messages that you have already
sent or just saved without sending.
When the Outbox menu option is selected, the list
of messages you have sent or saved displays with
the:
• recipient’s phone number, or name if stored in
Phonebook.
• message status;
for a sent message or
a message to send.
for
You can search for a number in Phonebook by
pressing the Phonebook soft key.
To view a message, scroll to it and press the Select
soft key. The screen shows the:
Note: To clear or clear all your input, press or
press and hold the C key. When you have
no input, press and hold the C key to move
to the previous screen.
• message status;
for a sent message or
a message to send.
To send the message to multiple destinations up
to 5, press the Add soft key and repeat step 4.
• message contents.
5. When you have finished entering the numbers,
press the Ok soft key.
6. If the Enter centre screen displays, enter the
service number and press the Ok soft key.
for
• memory where the message was stored;
for
the SIM card or
for the phone’s memory.
You can scroll to the next or previous message by
pressing the Left or Right key.
To scroll through the message, press the Up or
Down key.
You can store the SMS service centre number. For
details, see page 87.
70
71
Messages
Messages
You can choose the following options by pressing
the Options soft key:
Multimedia Message
Delete: allows you to delete the message.
Multimedia Message Service (MMS) is a messaging
service very similar to Short Message Service
(SMS). It provides asynchronous delivery of
personal multimedia messages from between
phone and phone, phone and e-mail, phone and
web(by URL).
Cut address: extracts phone numbers, email
addresses or URL addresses in the text, so that you
can call the number or send a message to the
number or save it in your Phonebook.
Send: allows you to send the message to another
person.
Edit: allows you to edit the message.
Transfer: allows you to transfer the message from
the SIM card to the phone’s memory or vice versa.
Delete All (Menu 1.1.4)
You can delete all messages stored in the SIM card
and phone’s memory in this menu.
1. Scroll to a message box and place a check mark
ahead of it by pressing the Select soft key.
Selecting All places check marks on all of the
message boxes.
2. If necessary, repeat step 1 to check another
box.
3. When you have finished checking, press the Ok
soft key.
4. When a confirming message appears, press the
Yes soft key to delete all of the messages in the
box(es).
(Menu 1.2)
In addition to the familiar text content of text
messages, multimedia messages can contain
images, graphics, voice and sounds. An MMS
message is a multimedia presentation in a single
entry. It is not a text file with attachments.
Using the MMS feature, your phone can receive
multimedia messages. You can also send picture
messages. This function is available only if it is
supported by your service provider. Only phones
that offer picture message features can receive and
display picture messages.
Retrieving a new message
When you are retrieving a message, the Retrieving
icon ( ) appears on the display. When you finish
retrieving a new message, the New message icon
(
) and a text notification showing the number of
the message appear on the display. You also hear
an alert, depending on the message sound setting;
for further details, see page 96.
To read the new message in Idle mode, press the
View soft key. And then you see the list in Inbox. If
you select a message, you can read it.
Otherwise, press the No soft key.
72
73
Messages
Notes:
• When you set the Message reception (see
page 88) to Automatic, you cannot enter the
Downloads menu (Menu 7.3.1) and cannot also
access WAP sites while retrieving a new message. If
a new message comes in your phone while you play
a Java game, your phone only receive a notification
message. After playing the game, you can retrieve
the message with saved notification message.
• To clear the new message notification on the display,
press the
key.
Messages
Inbox (Menu 1.2.1)
Your phone receives incoming messages and saves
them in Inbox.
When the Inbox menu is selected, the list of
messages received displays with the:
• message’s subject or No subject if the message
had no subject.
• sender’s phone number, or name if stored in
Phonebook.
If Message reception sets to Manual (for details,
see page 88), when the New message icon (
)
appears on the display, you have to retrieve
messages in Inbox. You select a message with the
icon such as
,
and
in Inbox. Then you
can select retrieve or delete message by pressing
the Options soft key.
• message status;
for a read message,
for
a message to read,
for a read notification
message and
for a notification message to
read.
Managing memory
To view a message, scroll to it and press the Select
soft key.
When the memory is full, the New message icon
(
) blinks and an error message displays. (It
disappears when you press the
key, but it
reappears if you don’t delete old messages.) In this
case, you cannot receive any new messages. You
must delete one or more old messages to get free
memory for new messages using the Delete option
within Inbox, Outbox, Draft or My folder, or the
Delete all option; for further details, see page 83.
Note: The icon of message status can have various
forms like
,
,
as the priority that
sender fixed.
To scroll through the message contents, press the
Up or Down key. When the message has more than
one page, you can press the Left or Right key to
move through the pages or the pages are moved
through as paging timing that sender fixed
automatically.
Notes:
Notes:
• Some types of sound or picture may not be able
to play or display.
• You can only receive up to 150 messages.
• Multimedia message boxes and Media box share a
given amount of memory in your phone. You can
also use the Delete or Delete all option to delete
some sounds or images in Media box.
• When the message has an attachment like video
clips, the Attachment icon (
) appears on the
title line. You may not play the attachment. And
you may also not extract it from the message.
74
75
Messages
Messages
You can choose the following options by pressing
the Opt. soft key:
Delete: deletes the message
Replay: replays the message.
Reply: replies to the sender by sending a message.
Item
2. Press the Ok soft key.
Forward: forwards the message to another person.
Call back: allows you to call the sender back.
Cut media: extracts the picture or sound, so that
you can set them as a wallpaper or ringtone or you
can send them as a multimedia message.
Cut address: extracts phone numbers, email
addresses or URL addresses in the text, so that you
can call the number or send a message to the
number or save it in your Phonebook.
Properties: shows you detailed information about
the message.
Move to My folder: moves the message to the My
folder for later use.
New Message (Menu 1.2.2)
This menu option allows you to create a new
multimedia message and then send it to multiple
destinations.
1. Select one of the following items using the Up or
Down key and press the Add soft key.
How to add
Subject 1. Enter a subject of your message.
For details about entering
characters, see page 37.
Picture
Sound
Note: To move a previous screen while
entering a message, press and hold
the C key.
1. Select one of the pictures you want to
add. The picture is displayed.
2. Press the Add soft key.
To add a new sound;
1. Select the Record new option.
2. Press the Record soft key to start
recording.
3. Press the Stop soft key to stop
recording.
4. Press the Play soft key to replay the
sound. Or, press the Add soft key to
add it. Enter the sound’s name and
press the Ok soft key. The sound is
added to the message and saved in
Media box automatically.
To add a sound in Media box;
1. Select one of the sound categories.
The sound list of the category is
displayed.
2. Select one of the sounds you want to
add.
3. Press the Select soft key to add it.
76
77
Messages
Item
Messages
How to add
Message 1. Enter a new message. Or you can
enter a preset message.
To enter a preset message;
• Save message: saves the message in Draft
(Menu 1.2.4) or My folder (Menu 1.2.5).
Note: To go back to the edit screen, press the
soft key or the C key.
• Press the Opt. soft key and select
the Preset messages.
3. When you finish creating the message, select
Send from the options.
• Select one of the preset messages.
4. Select an entry on the Send screen.
2. Press the Opt. soft key and select the
Done option to add the message.
Note: To move a previous screen while
entering a message, press and hold
the C key.
2. Press the Opt. soft key to use the following
options.
If it is an empty entry, enter a destination as
below.
Number: to enter a destination number.
E-mail: to enter e-mail address.
Phonebook: to enter a destination from
phonebook.
• Preview: shows your message as it will
display on the recipient’s phone. To go back to
the message screen, press the Edit soft key.
To send the message, press the Send soft key
and go to step 4.
After entering a destination, press the Ok soft
key.
• Send: allows you to send the message to
another person. Refer to the next steps.
Edit address: to edit the selected address.
• Add page: allows you to add up to 10 pages.
You can move to each page using the Left or
Right key on the message screen.
• Page timing: allows you to set how long one
page of the received messages displays. After
a specified time, the display automatically
scrolls to the next page.
• Clear subject/picture/sound/message:
allows you to delete the subject, image, sound
or message by selected work.
If it is not an empty entry, do the following
things.
Delete address: to delete the selected
address.
Note: To clear or clear all your input, press or
press and hold the C key. When you have
no input, press and hold the C key to move
to the previous screen.
5. To send the message to multiple destinations up
to 20, repeat step 4.
• Delete page: allows you to delete the current
page.
78
79
Messages
6. When you have finished entering the
destinations, press the Send soft key.
Press the Cancel soft key not to send the
message.
When the phone fails to send the message, press
the Retry soft key to try again the transmission.
Or, press the Cancel soft key to save the message.
Outbox (Menu 1.2.3)
Outbox stores messages that you sent, you failed to
send and you cancelled sending.
When the Outbox menu option is selected, the list
of messages you have sent or saved displays with
the:
• message’s subject or No subject if the message
had no subject.
• recipient’s phone number, or name if stored in
Phonebook.
• message status;
for a sent message,
for a
message that failed to send or you cancelled
sending,
for a delivered report. When
receiver retrieve a message you sent,
is
changed into
.
To view a message, scroll to it and press the Select
soft key.
To scroll through the message, press the Up or
Down key. When the message has more than one
page, you can press the Left or Right key to move
through the pages or the pages are moved through
as predefined page timer, which the sender sets,
has elapsed.
80
Messages
You can choose the following options by pressing
the Opt. soft key:
Delete: deletes the message.
Replay: replays the message.
Send: send the message.
Properties: shows you detailed information about
the message.
Move to My folder: moves the message to the My
folder for later use.
Draft (Menu 1.2.4)
This message box stores messages that you save,
interrupted messages by an incoming call or
message while you create a new message.
Note: Saves messages that are failed to send in
Outbox.
To view a message, scroll to it and press the Select
soft key.
You can choose the following options by pressing
the Opt. soft key:
Send: replies to the sender by sending a message.
Replay: replays the message.
Delete: deletes the message.
Properties: shows you detailed information about
the message.
81
Messages
Messages
My Folder (Menu 1.2.5)
Delete All (Menu 1.2.6)
You can move the messages stored in Inbox or
Outbox to the My folder by using the Move to My
folder option. While making a new message, you
can also save to My folder by using the Save
message option.
This menu option allows you to delete all of the
messages in each message box. You can also delete
all of your messages at one time.
To view a message, scroll to it and press the Select
soft key.
You can choose the following options by pressing
the Opt. soft key:
Delete: deletes the message.
Replay: replays the message.
1. Scroll to a message box and place a check mark
ahead of it by pressing the Select soft key.
Selecting All places check marks on all of the
message boxes.
2. If necessary, repeat step 1 to check another
box.
3. When you have finished checking, press the Ok
soft key.
Send: send the message.
Cut media: extracts the picture or sound, so that
you can set them as a wallpaper or ringtone or you
can send them as a multimedia message.
Cut address: extracts phone numbers, email
addresses or URL addresses in the text, so that you
can call the number or send a message to the
number or save it in your Phonebook.
4. When a confirming message appears, press the
Yes soft key to delete all of the messages in the
box(es).
Otherwise, press the No soft key.
Properties: shows you detailed information about
the message.
82
83
Messages
Voice Mail
Messages
(Menu 1.3)
Preset Messages
(Menu 1.4)
When you receive a voice mail, your phone displays
the
icon and you hear an alert.
Using this menu, you can preset up to nine
messages that you use most frequently. When you
access this menu, the preset message list displays.
Connect To Voice Mail (Menu 1.3.1)
1. Scroll to a message or an empty entry by
pressing the Up or Down key.
• In Idle mode, when you receive a new voice mail,
press the Connect soft key to access your voice
mail server and follow the instructions provided.
• In Idle mode, hold the 1 key down to access your
voice mail server and follow the instructions
provided.
• Call your voice mail server number by accessing
the Connect to voice mail menu (Menu 1.3.1)
and follow the instructions provided.
Voice Server Number (Menu 1.3.2)
2. Press the Select soft key and enter a new
message or change the old message.
For further details about entering characters,
see page 37.
3. Press the Ok soft key to save the message.
Broadcast
(Menu 1.5)
Before using the voice mail service, you must store
the voice mail server number obtained from your
service provider.
This network service allows you to receive text
messages on various topics, such as the weather or
traffic. Messages are displayed immediately as they
are received, provided that:
When you select an entry, following options are
available:
• the phone is in Idle mode.
Edit number: enter a voice mail server number or
press the Phonebook soft key to enter a number
from phonebook. And then press the Ok soft key.
Change name: enter a server name and press the
Ok soft key to save it.
Delete: when the confirming message appears,
press the Yes soft key. To cancel, press the No soft
key.
84
• the Receive option (Menu 1.5.2) is set to On.
• the message channel is currently active on the
channel list.
When you get broadcast messages, you can see the
messages in Idle mode. If it is short you can see
the display, otherwise, press the view soft key to
read the message.
85
Messages
In the Broadcast menu option, the following
options are available:
Messages
Settings
(Menu 1.6)
Read: lets you read the received broadcast
messages.
Short Message (Menu 1.6.1)
Archive: shows the list of the messages you saved
from the temporary list.
Using this menu, you can set up default SMS
information. The following options are available:
Temporary: shows the latest messages. These
messages will be gone when the phone is switched
off.
Service centre: allows you to store or change the
number of your SMS centre required when sending
messages. You must obtain this number from your
service provider.
If the message is long, press the UP or Down key.
When you read a message, press the Options soft
key to access following options:
Cut number: shows the list of numbers included in
the message.
Save: (Temporary only) saves this message to
Archive list.
Delete: delete this message.
Delete All: delete all message on the list.
Receive: allows you to turn the reception of
broadcast messages on or off.
Channel: the check mark inside All check box
indicates that the channel is enabled.
To enable or disable this channel press the Select
soft key, then select Enable or Disable.
The Add channel option allows you to add a new
channel to the channel list. Enter the appropriate
channel code obtained from your service provider
and a title for the channel.
Language: selects a language you prefer. Then,
You can get cell broadcast messages only in the
language you selected.
86
Validity period: allows you to set the length of
time your messages are stored at the message
centre while attempts are made to deliver them.
Message type: allows you to set the message type
to Text, Fax, Voice, ERMES, X400, or E-Mail.
The network can convert the messages into the
selected format.
Reply path: allows the recipient of your SMS
message to send you a reply via your message
centre, if the service is provided by the network.
Delivery report: allows you to set on or off. When
this function is set to on, the network informs you
whether or not your message has been delivered.
Multimedia Message (Menu 1.6.2)
Using this menu, you can set up default settings for
sending or receiving MMS message. The following
options are available:
Send settings: The following options are available:
Priority: allows you to set the priority of message.
Validity period: allows you to set the length of time
your messages are stored at the message centre
while attempts are made to deliver them.
87
Messages
Messages
Delivery after: you can set the delay time before
the phone sends your messages.
• Profile name: enter the name of the profile.
Leave a copy: allows you to copy the message that
you sent.
• GSM setting: allows you to change the proxy
settings for the GSM network.
Address hiding: when this option sets to On, your
phone number does not display on the recipients
phone.
Delivery report: when this option sets to On, the
network informs you whether or not your message
has been delivered.
Read reply: when this option sets to On, your
recipient’s phone sends a reply to let you know
when your message was read by her/him.
Receive settings: the following options are
available:
Message reception: allows you to set how you
receive a message. You can select one of Manual,
Automatic and Reject.
Anonymous reject: when this option sets to On,
your phone rejects messages without a caller ID.
Adverts reject: when this option sets to On, you
can reject advertisements by service provider.
Report allowed: when this option sets to On, your
phone does not send a reply to the recipient’s
phone even if the sender asks for the read reply.
• Server URL: enter the address of profile server.
- Gateway: enter the IP address and IP port.
- Data call type: select a network connection
type between ISDN and Analogue.
- Dial number: enter the server phone
number.
- Login ID: enter the server login ID.
- Password: enter the server password.
• GPRS setting: allows you to change the proxy
settings for the GPRS network.
- Gateway: enter the IP address and IP port.
- APN: enter the access point name used for
the address of the GPRS network gateway.
- Login ID: enter the user ID required to connect
to GPRS network.
- Password: enter the password required to
connect to the GPRS network.
• Bearer: select the bearer to be used for each type
of network accesses.
- GPRS only: it only works in GPRS network.
- GSM only: it only works in GSM network.
MMS profiles: in this menu, you can configure
MMS profile settings that are required when you
send or receive multimedia messages.
Current profile: allows you to select one profile to
use currently.
Profile setting: allows you to set up to five profiles.
88
89
Messages
Call Records
Memory Status
(Menu 1.7)
Via this menu, you can view the:
You can check the memory status for messages.
• calls you missed, received or dialled.
• cost of your calls.
Short Message (Menu 1.7.1)
• length of your calls.
You can check how many messages are stored in
SIM card and phone’s memory.
Note: You can access the numbers in the three types
key in Idle
of call records by pressing the
mode.
When you have finished, press the
the
key to exit.
soft key or
Multimedia Message (Menu 1.7.2)
Missed Calls
(Menu 2.1)
Multimedia message boxes and Media box share a
given amount of memory in your phone.
This option lets you view the last 20 unanswered
calls if the caller line identification is available.
The display shows the status of free and used
memory.
The number, or name if available, displays together
with the date and time when the call was missed.
You can see the used memory status of Multimedia
message boxes and Media box by pressing the Left
or Right key.
By pressing the Options soft key, you can also:
• delete the current call record from the list.
• delete all of the call records.
• paste the number into the Phonebook.
Received Calls
(Menu 2.2)
This option lets you view the last 20 received calls if
the caller line identification is available.
The number, or name if available, displays together
with the date and time when the call was received.
By pressing the Options soft key, you can also:
• delete the current call record from the list.
• delete all of the call records.
• paste the number into the Phonebook.
90
91
Call Records
Call Records
Dialled Calls
(Menu 2.3)
Call Time
(Menu 2.5)
This option lets you view the last 20 dialled
numbers.
This option lets you view the timers for calls made
and received.
The number, or name if available, displays together
with the date and time when the call was made.
Notes:
• If your SIM card supports the ALS (Alternate Line
Service) feature, you must first select the
appropriate line.
• The actual time invoiced for calls by your service
provider may vary, depending on network features,
rounding-off for billing purposes and others.
By pressing the Options soft key, you can also:
• delete the current call record from the list.
• delete all the call records.
• paste the number into the Phonebook.
The following timers are available:
Delete All
Last call time: the length of the last call.
(Menu 2.4)
You can delete all of the numbers, selectively
depending on the record types or all together.
When a confirming message appears press the Yes
soft key to confirm. Otherwise, press the No soft
key.
92
Total sent: the total length of all calls made since
the timer was last reset.
Total received: the total length of all calls
received since the timer was last reset.
You can use the Reset timers option to reset the
call timers.
93
Call Records
Sound Settings
Call Costs
(Menu 2.6)
This feature lets you view the cost of calls.
Notes:
• This feature is not intended to be used for billing
purposes.
• AOC (Advice Of Charge) information may display in
Idle mode, depending on your SIM card or service
provider.
The following options are available:
You can use the Sound Settings feature to
customise various settings, such as the:
• ring tone, volume and type for incoming calls or
messages.
• volume for the voice prompt.
• sounds made when your call is connected or
when you press a key.
• Quiet Mode to which your phone switches when
you hold down the
key.
Last call cost: cost of the last call made.
Total cost: total cost of all calls made since the
cost counter was last reset. If the total cost exceeds
the maximum cost set via the Set max cost
option, you can no longer make any calls until you
reset the counter.
Incoming Calls (Menu 3.1)
Max cost: maximum cost set via the Set max cost
option (see below).
Note: If your SIM card supports the ALS (Alternate
Line Service) feature, you must select the line
you wish to change first.
Reset counters: option used to reset the cost
counter; you must first enter your PIN2 (see
page 151) and then press the Ok soft key.
The following options are available:
Set max cost: option used to enter the maximum
cost that you authorise for your calls; you must first
enter your PIN2 (see page 151) and then press the
Ok soft key.
Default melodies: allows you to select one of the
predefined melodies.
Price/Unit: option used to set the cost of one unit;
this price per unit is applied when calculating the
cost of your calls; you must first enter your PIN2
(see page 151) and then press the Ok soft key.
94
This option allows you to set up the ringer for
incoming calls.
Each time you select a melody from the list, it plays
the melody.
My sounds: allows you to select one of sounds
received from other sources, such as the WAP sites
or multimedia messages.
Ring volume: allows you to adjust the ring
volume. Use the Up and Down keys or the volume
95
Sound Settings
Sound Settings
keys on the left side of the phone. The more bars
you see, the louder the volume.
Vibration then tone: the phone first vibrates and
then starts ringing.
Alert type: lets you specify how you are informed
of any incoming calls.
Light only: only the service light is switched on; the
phone neither rings nor vibrates.
Melody: the phone rings using the melody selected
via the Melody option. See above.
Repetition: allows you to specify how often the
phone informs you of a new message. You can
choose either Once or Periodic.
Vibration: the phone vibrates but does not ring.
Vibration then melody: the phone first vibrates and
then starts ringing.
Light only: only the backlight is switched on. The
phone neither rings nor vibrates.
Power On/Off
(Menu 3.3)
This option allows you to select the melody that the
phone sounds when you switch it on or off.
Messages
(Menu 3.2)
This option allows you to set up the ringer for
incoming each of short messages and multimedia
messages.
Short message (Menu 3.2.1) / Multimedia
message (Menu 3.2.2)
The following options are available:
Tone: lets you choose from many different tones.
Each time you select a tone from the list, the tone is
played.
You can choose either Basic or Cheerful. To turn
the sound off, select Off.
Connection Tone
(Menu 3.4)
This menu option allows you to specify whether or
not the phone beeps when the phone connects to
the network.
The following options are available:
Off: the phone does not beep.
On: the phone beeps when your call is accepted.
Alert type: lets you specify how you are informed
of any incoming messages.
Tone: the phone rings using the tone selected via
the Tone option. See above.
Vibration: the phone vibrates but does not ring.
96
97
Sound Settings
Key Tone
Sound Settings
(Menu 3.5)
This menu option allows you to select the tone that
the keypad sounds when you press a dial key.
Quiet Mode
(Menu 3.7)
The following options are available:
When you hold the
key down in Idle mode, the
phone switches to the Quiet Mode. You can specify
whether the phone vibrates or mutes about all
sounds in the Quiet Mode.
Off: the keys do not make any sound.
The following options are available:
Tone: each key, when pressed, makes a different
sound.
Vibration: the phone vibrates rather than rings in
the Quiet Mode.
Beep: each key, when pressed, makes the same
sound.
Mute: the phone mutes sound settings in the Quiet
Mode.
Woman: each key, when pressed, makes woman’s
voice.
Girl: each key, when pressed, makes girl’s voice.
Piano: each key, when pressed, makes a sound
like playing the piano.
Drum: each key, when pressed, makes a sound
like playing the drum.
To adjust the key tone volume, press the volume
keys on the left side of the phone in Idle mode.
Minute Minder
(Menu 3.6)
This menu option allows you to specify whether or
not the phone beeps every minute during a call to
keep you informed of the length of your call.
The following options are available:
Off: the phone does not beep.
On: the phone beeps every minute.
98
99
Phone Settings
Phone Settings
Display
Many different features of your phone can be
customised to suit your preferences via the
Phone Settings menu.
Greeting Message
(Menu 4.1)
(Menu 4.2)
You can change the background image and the
colour of the components on the display according
to your preference and needs.
Wallpaper (Menu 4.2.1)
This menu option allows you to set a greeting
message to be displayed briefly when the phone is
switched on.
This option allows you to change the background
image to be displayed in Idle mode.
When you access this menu, the current message
displays.
Animations: allows you to select one of the
animations.
To
Press the
clear the existing
message
C key and hold it down.
enter a new
message
appropriate alphanumeric
keys.
save your input
Ok soft key.
cancel your input
and return to Idle
mode
key.
For further information on how to enter text, see
page 37.
100
The following options are available:
Images: allows you to select one of images in the
Image box in the Media box menu that are
downloaded from the Internet or the EasyStudio PC
software.
Text position: allows you to select the position of
the text displayed on the idle screen, such as the
operator’s name, current date and time, and text
notifications of missed calls or new messages.
Choose either Top or Bottom. If you set this option
to Off, your phone displays only the wallpaper
image.
Text style: allows you to set the style of the text
displayed on the idle screen.
Note: When you set the wallpaper image to
Calendar, the Text position and Text style
options don’t work.
101
Phone Settings
Skin (Menu 4.2.2)
You can change the colour setting of the display
components, such as text, soft key indications area
or the menu names and icons.
Phone Settings
Auto Keylock
(Menu 4.3)
You can set the phone to automatically lock the
keys if no key is pressed within a given of time. This
feature is useful to avoid pressing keys by mistake.
Backlight (Menu 4.2.3)
To use this feature, select the length of time for
which the phone waits before it locks the keypad.
You can specify how long the phone uses the
backlight.
15 sec, 30 sec, 1 Min and 2 Min are available.
Select how long the backlight remains on after the
last key is pressed.
If you don’t want to use this feature, select Off.
Note: You can manually lock the keypad. For further
details. see page 25.
LCD Contrast (Menu 4.2.4)
This option allows you to adjust the contrast of the
display.
1. Adjust the contrast by using the Up and Down
keys or the volume keys on the left side of the
phone.
Language
(Menu 4.4)
You can select a display language.
2. When you are satisfied, press the Ok soft key to
save the selection.
102
103
Phone Settings
Security
(Menu 4.5)
The security settings enable you to restrict the use
of your phone to the people and types of calls of
your choice.
Phone Settings
Phone Lock (Menu 4.5.3)
When the Phone Lock feature is enabled, the phone
is locked and you must enter the 8-digit phone
password each time the phone is switched on.
Various codes and passwords are used to protect
the features of your phone. They are described in
the following sections. See also page 150 -152.
The password is preset to “00000000” at the
factory. To change the phone password, see the
Change password menu option on the following
page.
PIN Check (Menu 4.5.1)
Once the correct password has been entered, you
can use the phone until you switch it off.
When the PIN Check feature is enabled, you must
enter your PIN each time you switch the phone on.
Consequently, any person who does not have your
PIN cannot use your phone without your approval.
Note: Before disabling the PIN Check feature, you
must enter your PIN.
The following options are available:
Disable: you are not asked to enter the phone
password when you switch the phone on.
Enable: you are required to enter the phone
password when you switch the phone on.
The following options are available:
Disable: the phone connects directly to the
network when you switch it on.
Enable: you must enter the PIN each time the
phone is switched on.
To change your PIN, see the Change PIN menu
option. See below.
Change Password (Menu 4.5.4)
The Change Password feature allows you to change
your current phone password to a new one. You
must enter the current password before you can
specify a new one.
The password is preset to “00000000” at the
factory. Once you have entered a new password,
you are asked to confirm it by entering it again.
Change PIN (Menu 4.5.2)
This feature allows you to change your current PIN
to a new one, provided that the PIN Check feature
is enabled. You must enter the current PIN before
you can specify a new one.
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
104
Privacy (Menu 4.5.5)
This feature allows you to lock or unlock the usage
of the contents, such as multimedia messages,
images and sounds.
To enable or disable the privacy feature, you must
enter your password.
105
Phone Settings
Phone Settings
SIM Lock (Menu 4.5.6)
Change PIN2 (Menu 4.5.8)
To enable the SIM Lock feature, you must enter a
new four- to eight-digit SIM lock code, and confirm
it by entering it again.
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the
current PIN2 before you can specify a new one.
The following options are available:
Once you have entered a new PIN2, you are asked
to confirm it by entering it again.
Disable: you can use any other SIM cards with
your phone.
Enable: you must enter the SIM lock code to use
another SIM card with your phone.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
To unlock the SIM, enter the SIM lock code.
Auto Redial
FDN Mode (Menu 4.5.7)
With the Auto Redial function, the phone makes up
to ten attempts to redial a phone number after an
unsuccessful call.
The FDN (Fixed Dial Number) mode, if supported by
your SIM card, allows you to restrict your outgoing
calls to a limited set of phone numbers.
The following options are available:
Disable: you can phone any number.
Enable: you can only call phone numbers stored in
Phonebook. You must enter your PIN2.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
To change your PIN2, see the Change PIN2 menu
option. See below.
(Menu 4.6)
Note: The interval between two call attempts varies.
The following options are available:
Off: the number is not redialled.
On: the number is redialled automatically.
Anykey Answer
(Menu 4.7)
You can answer incoming calls by pressing anykey
or not.
Off: You can only press
to answer incoming calls.
or the Accept soft key
On: you can press any key, except
Reject soft key to answer.
106
and the
107
Phone Settings
Phone Settings
Auto Answer
(Menu 4.8)
The phone automatically answers calls after 3,5,
and 10 seconds. You can also turn this feature off.
Note: This feature is only available when the phone is
connected to a car kit (optional).
Fax Mode
(Menu 4.9)
You can use your phone as a modem for faxing
when it is connected to computing devices. You
need to purchase a data kit from your local
Samsung dealer.
In this menu, you can enable the fax mode on your
phone.
The following options are available:
Off: you can send or receive data calls.
On: you can send or receive fax calls.
Service Light
(Menu 4.10)
You can turn off the service light and change the
colour of the service light.
Reset Settings
(Menu 4.11)
This menu option allows you to reset your phone to
its default configuration. You can reset the sound
settings, phone settings or all of the settings
together.
1. Select one of the settings to reset by pressing
the Select soft key.
2. When a confirming message appears, press the
Yes soft key to reset settings. Then enter the
phone password and press the Ok soft key.
The password is preset to “00000000”by
default. To change it, see page 105.
Otherwise, press the No soft key.
In any case you can send or receive voice calls.
After connecting the phone to your computing
device using the data cable and set this menu to
On. Your phone works as a fax modem.
For further details about setting and faxing through
the phone on your computer, see the computers
user’s manual.
108
109
Organiser
Organiser
• Call: calls you need to make.
The Organiser feature enables you to:
• view the calendar and/or write a memo or to do
list.
• set the current date and time, and find out what
time it is in various cities around the world.
• set the alarm so that the phone rings at a specific
time.
• use your phone as a calculator, unit convertor,
timer or stopwatch.
New Memo
(Menu 5.1)
This menu option allows you to create a new memo.
Note: You can also access this menu by holding down
the C key in Idle mode.
1. Write your memo of up to 100 characters and
press the Ok soft key.
For further information about how to enter text,
see page 37.
2. Select the category of the memo to be saved
and press the Select soft key.
The following categories are available:
• Scheduler: general schedule events, such as
appointments or meetings.
• To do list: tasks you need to do. They are
saved on the to do list.
• Anniversary: anniversaries to be
remembered, such as wedding anniversaries,
birthdays or other special days.
Note: You can save up to 25 items to each
category, so you can save 100 memos
totally.
3. Scroll to a date on the calendar by pressing the
navigation keys. Press the Select soft key.
4. If applicable depending on the category you
selected, enter the event time and press the Ok
soft key.
5. If you have selected the 12-hour time format
(see page 117), select AM or PM by pressing
the Up or Down key and then press the Select
soft key.
6. To set an alarm for the memo, press the Yes
soft key.
Otherwise, press the No soft key. The memo is
saved immediately. Go to Step 10.
7. Enter the time for the alarm to sound and press
the Ok soft key.
8. If you have selected the 12-hour time format
(see page 117), select AM or PM by pressing
the Up or Down key and then press the Select
soft key.
9. Select an alarm melody and press the Select
soft key.
The memo is saved and then displays on the
screen.
110
111
Organiser
Organiser
10. You can choose the following option by pressing
the Options soft key:
The following options are available when you press
the Options soft key on the Calendar display:
• Add: allows you to add a new memo on the
day.
Add memo: allows you to add a new memo on the
day.
• Delete: allows you to delete the memo.
• Edit: allows you to edit the memo.
Go to date: allows you to enter a particular date
and then schedule an event on that date.
• Move: allows you to move the memo to a
different date.
View all: shows all of the events that you have
scheduled.
• Copy: allows you to copy the memo to a
different date.
Delete day: deletes the scheduled event on the
selected day.
11.When you have finished, press the
the
key to exit.
soft key or
Delete all: deletes all of the events that you have
scheduled.
Creating a New Memo
Calendar
(Menu 5.2)
The calendar helps you to keep track of schedule,
calls that you need to make, tasks that you need to
do and anniversaries. You can set the alarm to ring
when the set date for a schedule is reached.
Consulting the Calendar
To
Press the
move to another
day
move to another
week
move to the
previous or next
month
move to the
previous or next
year
Left or Right key.
112
Up or Down key.
Up or Down key and hold it
down
Left or Right key and hold it
down.
1. Scroll to a date on the calendar, referring to
page 112, and press the Select soft key.
2. Write your memo and press the Ok soft key.
For further information about how to enter
characters, see page 37.
3. Select the category of the memo to be saved
and press the Select soft key.
The following categories are available:
• Scheduler: general schedule events, such as
appointments or meetings.
• To do list: tasks you need to do.
• Call: calls you need to make.
• Anniversary: anniversaries to be
remembered, such as wedding anniversaries,
birthdays or other special days.
4. Follow the procedure from Step 4 on page 111
onwards to save the memo.
113
Organiser
Viewing Your Calendar Memos
A date that has a memo associated with it is
highlighted in a red box. If you select a date when
events have already been scheduled, the number of
memos of each type is shown at the bottom of the
calendar.
•
: General schedule events
•
: To do list
•
: Calls
•
: Anniversaries
Organiser
To Do List
(Menu 5.3)
This menu allows you to view a list of tasks.
To create a new memo of the To do list type:
1. Write the memo about your task and press the
Ok soft key.
For more information about how to enter
characters, see page 37.
2. Scroll to a date on the calendar, referring to
page 112, and press the Select soft key.
Press the Select soft key to view the memos.
If you have created more than one memo on the
same day, you can scroll to the event you want to
view by pressing the Left or Right key.
The following options are available when you press
the Options soft key:
Add: allows you to add a new memo. For further
information about how to add a memo, see
page 110.
Delete: allows you to delete the memo.
3. Follow Step 4 on page 111 onwards to save the
memo.
Once you have defined tasks, they are listed with a
status mark (
for Done or
for Undo) within
the To do list menu.
To scroll to a specific task, press the Up or Down
key and press the Select soft key. The task displays
with the deadline, alarm setting, job details and
status mark.
Edit: allows you to edit the memo.
You can scroll to the previous or next task by
pressing the Left or Right key.
Move: allows you to move the memo to a different
date.
The following options are available when you press
the Options soft key:
Copy: allows you to copy the memo to a different
date.
Add: allows you to add a new task. For details
about adding To do list-type memos, see page 110.
Mark: allows you to change the status mark.
Edit: allows you to edit the contents of the task.
Move: allows you to move the task to a different
date.
114
115
Organiser
Copy: allows you to copy the task to a different
date.
Delete: allows you to delete the task.
Delete all: allows you to delete all of tasks from
the list.
Organiser
To select your time zone:
1. Select the city corresponding to your time zone
by pressing the Left or Right key one or more
times.
The local date and time display.
2. Press the Set soft key.
Clock
(Menu 5.4)
This option allows you to change the current time
and date displayed. You can also check the current
time for Greenwich Mean Time (GMT) and 21 major
cities around the world.
The following options are available:
Set time: allows you to enter the current time. You
can choose the time format in the Set format
menu option; see page 117.
Note: Before setting the time, you must specify your
time zone in the Set world time menu option.
Set date: allows you to enter the day, month and
year. You can change the date format in the Set
format menu option; see page 117.
Set world time: allows you to check the current
time in GMT and 21 major cities around the world.
Scroll through the cities using the Left or Right key.
The screen shows the:
• city name.
• current date and time.
• time difference between the selected city and
your city if you have set the local time (see
below) or GMT (by default).
116
3.
To
Select
update the current Set local.
date/time with this
new setting
indicate that the
time zone is
currently using the
daylight saving
time
Set DST. The
icon is
shown next to the time
difference.
indicate that the
time zone is no
longer using the
daylight saving
time
Remove DST (only
available when the
icon is shown next to the
time difference).
4. When you have finished, press the
the
key to exit.
soft key or
Set format: allows you to change the time and
date formats.
Time format: 24 hours
12 hours
Date format: DD/MM/YYYY (day/month/year)
YYYY/MM/DD (year/month/day)
117
Organiser
Alarm
Organiser
(Menu 5.5)
This option allows you to set an alarm to ring at a
specific time. You can set up to three alarms or set
the phone to ring an alarm when it is switched off.
To set an alarm:
1. Select either Morning call, Alarm1 or Alarm2
by pressing the Up or Down key.
The
icon means that no alarm is currently
set. The
icon means that an alarm has
already been set.
Once an alarm has been set, you can see the Alarm
icon ( ) on the top line of the display. To stop the
alarm when it rings press any key.
Note: When the Quiet Mode is activated, the alarm
tone doesn’t sound. But When you set a
Morning call, it sounds the alarm tone even if
the Quiet Mode is activated.
To set the alarm to ring even if your phone is
switched off:
1. Scroll to Auto power on the Alarm list and
press the Select soft key.
2. If necessary, press the Up or Down key to select
On.
2. Press the Select soft key.
3. Press the Options soft key.
To turn the Auto Power feature off, select Off.
4. Scroll to an option by pressing the Up or Down
key and press the Select soft key. Change the
setting, as needed.
• Alarm day: place or remove a check mark on
the day(s) of the week by pressing the Select
soft key. If you want to set a daily alarm,
select Everyday. If you want to set a
temporary alarm, select Once alarm. When
you press the Ok soft key after selecting, your
phone asks you to enter the alarm time.
3. Press the Select soft key to save the setting.
4. When you have finished, press the
the
key to exit.
soft key or
Once you have activated the auto power alarm, a
check mark appears ahead of Auto power. If the
phone is switched off at the specified alarm time, it
automatically switches on and rings the alarm. It
then automatically switches off again.
• Alarm time: enter the time for the alarm to
sound.
• Alarm tone: select an alarm melody.
• Remove alarm: deactivates the alarm.
5. Repeat Step 4 to change each setting.
6. When you have finished, press the
the
key to exit.
118
soft key or
119
Organiser
Calculator
Organiser
Conversion
(Menu 5.6)
(Menu 5.7)
You can use the phone as a calculator. The
calculator performs basic arithmetic functions, such
as addition, subtraction, multiplication, division and
remainder calculations.
This menu option allows you to convert from one
type of unit to another.
To perform a calculation:
1. Scroll to the type of conversion to be performed
from Length, Weight, Volume, Area and
Temperature, and press the Select soft key.
1. Enter the first number using the number keys.
Note: To erase any mistakes or clear the display,
press the C key.
2. Press the
key to enter a decimal point (.) or
the
key to enter the appropriate arithmetic
symbol: + (add), - (subtract),
(multiply), /
(divide), % (remainder), ( or ).
3. Enter the second figure.
To convert a value:
2. Enter the value to be converted and press the
Down key to move to the From field.
You can enter a decimal point (.) using the
key.
3. Select the original unit by pressing the Left or
Right key and press the Down key to move to
the To field.
Refer to the table on the following page for the
units available.
4. Repeat Steps 2 and 3, if necessary.
5. Press the Equal soft key to view the result.
The result appears in the Answer box.
Note: The result is rounded to six decimal places.
6. When you have finished, press the
the
key to exit.
soft key or
4. Select the required unit by pressing the Left or
Right key.
5. Press the Ok soft key or the
result.
key to view the
The result appears in the Answer box.
6. When you have finished, press the
the
key to exit.
120
soft key or
121
Organiser
Organiser
Units Available
To stop the timer melody when it rings, press any
key.
Type
Units
Length
mm
km
yard
cm
in
mile
m
ft
g
grain
kg
oz
ton
pound
• The timer uses power from the battery
consequently, the phone’s operating time is
reduced.
Volume
cm3
in3
gal
m3
ft3
l
yd3
• When the Quiet mode is activated, no sound.
Area
cm2
in2
acre
m2
ft2
a
yd2
Stopwatch
°C
°F
Weight
Temperature
To stop the timer before the end, press the Stop
soft key on the Timer screen.
Notes:
(Menu 5.9)
The stopwatch can be used to measure times for
various sports.
Example: Running or swimming races
Up to four stopwatches can be used.
Timer
(Menu 5.8)
Using the Timer feature, you can set the phone to
sound an alarm after a certain time.
The precision of the stopwatch is one hundredth of
a second. The maximum measurement time is 10
hours.
1. To start the stopwatches, press the Ok soft key.
1. Press the Set soft key.
2. Enter the length of time you want to count down
in hours and minutes and press the Ok soft key.
2. When you wish to stop the first stopwatch, press
the Ok soft key. Repeat this step for the other
stopwatches.
3. Press the Start soft key to start counting down.
3. Press the Reset soft key to reset the watches.
Even if you exit the Timer screen, the timer will
continue running. After the specified time has
expired, the phone informs you by playing a melody
and displaying a text notification.
4. Press the C or
122
key to exit.
123
Network Services
Network Services
These menu functions are network services.
Please contact your service provider to check their
availability and subscribe to them, if you wish.
Call Diverting
You can specify individual call diverting options for
each of the following call types:
• Voice calls only
• Fax calls only (not available when line 2 is in use)
• Data calls only (not available when line 2 is in
use)
(Menu 6.1)
Note: The call divert options may be different
depending on your SIM card and those not
supported by your network operator may not
be shown.
Example: You can:
• systematically divert fax calls to your
office fax machine.
• divert voice calls to your colleague if
you are already using the phone.
This network service enables incoming calls to be
rerouted to the number that you specify.
Setting Call Diverting Options
Example: You may wish to divert your business
calls to a colleague while you are on
holiday.
1. Select the type of call diverting by pressing the
Up or Down key and then press the Select soft
key.
Call diverting can be set up in the following ways:
2. Select the type of calls to be diverted by
pressing the Up or Down key and then press the
Select soft key.
Divert always: all calls are diverted.
Busy: calls are diverted if your phone is engaged
on another call.
3. Press the Activate soft key to confirm your
settings.
No reply: calls are diverted if you do not answer
the phone.
Unreachable: calls are diverted if you are not in an
area covered by your service provider.
Cancel all: all call diverting options are
deactivated.
4. Enter the number to which the calls are to be
diverted.
To enter an international code, hold down the 0
key until the + sign displays.
You can also select a number in the Phonebook
or the voice mail server number, by pressing the
Options soft key, followed by Phonebook or
Voice server.
5. When you are satisfied, press the Ok soft key.
The phone sends your settings to the network
and the network’s acknowledgement displays.
124
125
Network Services
Network Services
Deactivating Specific Call Diverting
Options
Cancel all: all call barring options are deactivated;
calls can be made and received normally.
1. Select the call diverting option to be
deactivated.
You can specify individual call barring options for
each of the following call types:
• Voice calls only
2. Select the type of calls to which this option
applies.
• Fax calls only (not available when line 2 is in use)
3. Press the Remove soft key.
• Data calls only (not available when line 2 is in
use)
The phone sends your settings to the network
and the network’s acknowledgement displays.
Setting Call Barring Options
You can also deactivate all call diverting options by
selecting the Cancel all option.
1. Select the type of call barring by pressing the Up
or Down key and then press the Select soft key.
Call Barring
2. Select the type of calls to be barred by pressing
the Up or Down key and then press the Select
soft key.
(Menu 6.2)
The call barring network service allows you to
restrict your calls.
Call barring can be set up in the following ways:
All outgoing: calls cannot be made.
International: international calls cannot be made.
3. Press the Activate soft key to confirm your
settings.
4. Enter your call barring password supplied by
your service provider and press the Ok soft key.
The phone sends your settings to the network
and the network’s acknowledgement displays.
International except to home: when abroad,
calls can be made only to numbers within the
current country and to your home country, that is
the country where your home network provider is
located.
All incoming: calls cannot be received.
Incoming while abroad: calls cannot be received
when you are using your phone outside your home
service area.
126
127
Network Services
Deactivating Specific Call Barring
Options
1. Select the call barring option to be deactivated.
2. Select the type of calls to which this option
applies.
Network Services
Call Waiting
(Menu 6.3)
This network service informs you when someone is
trying to reach you during another call.
You can specify individual call waiting options for
each of the following call types:
• Voice calls only
3. Press the Deactivate soft key.
4. Enter your call barring password supplied by
your service provider.
The phone sends your settings to the network
and the network’s acknowledgement displays.
You can also deactivate all call barring options by
selecting the Cancel all option.
• Fax calls only (not available when line 2 is in use)
• Data calls only (not available when line 2 is in
use)
Activating the Call Waiting Feature
1. Select the type of calls to which the call waiting
option is to be applied by pressing the Up or
Down key and then press the Select soft key.
Changing the Barring Password
You can set and change the call barring password
obtained from your service provider.
1. Select Change barring password from the
Call barring screen, and press the Select soft
key.
2. Enter the current password and press the Ok
soft key.
3. Enter a new password and press the Ok soft
key.
4. Enter the new password again to confirm it and
press the Ok soft key.
2. Press the Activate soft key to confirm your
settings.
The phone sends your settings to the network
and the network’s acknowledgement displays.
Deactivating Specific Call Waiting
Options
1. Select the type of call to which the option
applies.
2. Press the Deactivate soft key.
The phone sends your settings to the network
and the network’s acknowledgement displays.
You can also deactivate all call waiting options by
selecting the Cancel all option.
128
129
Network Services
Network Selection
Network Services
(Menu 6.4)
The Network Selection feature enables you to
automatically or manually select the network used
when roaming outside your home area.
Note: You can select a network other than your home
network only if it has a valid roaming
agreement with your home network.
To indicate to automatically or manually select the
network when roaming:
1. Press the Up or Down key until the appropriate
option highlights and press the Select soft key.
If you select Automatic, you are connected to
the first available network when roaming.
If you select Manual, the phone scans for the
available networks. Go to Step 2.
2. Press the Up or Down key until the preferred
network highlights and press the Select soft
key.
You are connected to that network when
roaming.
130
Caller ID
(Menu 6.5)
You can prevent your phone number from being
displayed on the phone of the person being called.
Note: Some networks do not allow the user to change
this setting.
The following options are available:
Default: the default setting provided by the
network is used.
Hide number: your number does not display on
the other person’s phone.
Send number: your number is sent each time you
make a call.
Active Line
(Menu 6.6)
Some SIM cards may be used with two subscriber
numbers. This function is available only if your SIM
card supports it.
This menu option allows you to select the line to be
used to make calls. However, calls can be answered
on both lines, regardless of the selected line.
131
Fun Box
Fun Box
To scroll through the screen, use the Up and Down
keys.
The Fun box menu contains several fun options:
• WWW services
To exit the browser, press the
The phone returns to Idle mode.
• Media box
• JAVA world
WWW Services
key at any time.
Navigating the WAP Browser
(Menu 7.1)
Your phone comes equipped with a WAP (Wireless
Application Protocol) Browser, making it possible for
you to access the Wireless Web.
Each time you start the WAP Browser, the phone
connects to the Wireless Web and the service
indicator icon (
or
) appears on the display to
inform you that you are connected to the Wireless
Web and will be billed accordingly. Rates vary
according to your service option.
The WAP Browser ends the network connection
after a certain period of inactivity and automatically
reconnects as necessary. For this reason, you may
find that you are billed for several network
connections within a single session. This is normal
and is designed to minimise your bill.
To
Press the
scroll through and
select browser
items
Up or Down key until the item
you want highlights, and then
press the
soft key.
select a numbered
item
corresponding numeric key.
return to the
previous page
(or Back) soft key or C
key.
return to the
startup homepage
key and select the Home
browser option. For details,
see page 133.
Entering Text in the WAP Browser
When you are prompted to enter text, the current
text input mode appears above the right soft key.
For further information on how to enter text, see
page 37.
Home (Menu 7.1.1)
When you select this menu option, the phone
connects to the network and loads the homepage of
the Wireless Web service provider.
Using the WAP Browser Menus
Once connected, the homepage displays. The
content depends on the service provider.
To access the WAP Browser menu:
Note: To quickly launch the WAP browser from Idle
mode, press the key.
1. Press the
key or scroll to the logo on the top
left of all Web pages and then press the ( ) soft
key. A list of options appears.
132
There are various menu options available when
surfing the Wireless Web.
133
Fun Box
Fun Box
2. Highlight the required option using the Up or
Down key.
Messages: allows you to read or write an SMS
message. For details, see page 66.
3. Press the
Media box: allows you to use your Media box. For
details, see page 138.
soft key to select the option.
4. If necessary, select the secondary option by
pressing the Up or Down key and then press the
soft key.
Note: The WAP Browser menus may vary,
depending on your version of the browser.
The following options are available:
Back: returns to the previous page.
Home: takes you back at any time to the
homepage of the Wireless Web service provider.
Answering a Call During a WAP Connection
You can receive an incoming call while you are
navigating the WAP browser.
Answer the call by pressing the
key, as you
normally would. After ending the call, you can
continue navigating on the Web page you
previously were accessed.
Bookmark (Menu 7.1.2)
Exit: exits the WAP browser.
Reload: reloads the current page.
This menu option allows you to store the URL
addresses of up to 10 of your favourite Web sites.
Show URL: shows the URL address of the Web
page you are currently accessed.
To store a URL address:
Advanced: the following options are available:
1. Select an empty location and press the Select
soft key.
Clear Cache: clears the information stored in the
cache, the phone’s temporary memory used to
store the most recently accessed Web pages.
About...: shows browser information.
Using the WAP Browser Options
Several options are available when you are surfing
the Wireless Web. To access these options, press
the key once connected to the Wireless Web.
2. Enter the name of the bookmark and press the
Ok soft key.
For further information about how to enter text,
see page 37.
3. Enter the address and press the Ok soft key to
save it.
Once you have stored an address, the following
options are available when you select it.
Goto URL: allows you to manually enter the URL
address of the site that you wish to access.
Go: allows you to access the site directly.
Bookmark: allows you to use the Bookmark
menu option. For details, see page 135.
Edit: allows you to change the name and URL
address of the bookmark.
134
Delete: allows you to delete the bookmark.
135
Fun Box
Go to URL (Menu 7.1.3)
Fun Box
Login ID: enter the PPP server login ID.
Password: enter the PPP server password.
This menu option allows you to manually enter the
URL address of the Web site that you wish to
access.
GPRS setting: you can change the proxy settings
for the GPRS network.
Enter the URL address and press the Ok soft key.
Gateway: enter the IP Address and IP Port.
For further information about how to enter text, see
page 37.
APN: enter the access point name used for the
address of the GPRS network gateway.
Clear Cache (Menu 7.1.4)
Login ID: enter the user ID required to connect to
the GPRS network.
This menu option allows you to clear the
information stored in the cache, the phone’s
temporary memory used to store the most recently
accessed Web pages.
Proxy Settings (Menu 7.1.5)
This menu option allows you to set up five proxy
servers.
Note: You do not need to change the browser settings
in most cases. Change the settings only when
your network provider asks you to.
For each proxy, the following options are available:
Password: enter the password required to connect
to the GPRS network.
Home URL: You can change the address of your
startup homepage.
When the default homepage displays, you can
delete it using the C key and enter your own choice.
To enter any special characters, / for example, use
the Symbolic mode; see page 47.
Bearer: You can select the bearer to be used for
each type of network accesses.
GPRS first: your phone will search for the GPRS
network first. If this service is not available, you
can set the GSM service temporarily.
Proxy name: enter the name of the HTTP proxy
server.
GPRS only: the phone only works in GPRS
networks.
GSM setting: you can change the proxy settings
for the GSM network.
GSM only: the phone only works in GSM networks.
Gateway: enter the IP Address and IP Port
Current Proxy (Menu 7.1.6)
Data call type: select a network connection type;
ISDN or Analogue.
This menu option allows you to activate one of the
proxies you set up to use the WAP connection.
Dial number: enter the PPP server phone number.
136
137
Fun Box
Fun Box
Push Messages (Menu 7.1.7)
Send: allows you to send it via a message.
This menu allows you to set to be received and read
push messages.
Rename: allows you to rename it.
The following options are available:
Set as wallpaper: allows you to set it as a
wallpaper.
Inbox: Your phone receives push messages and
saves them in Inbox. And you can read push
messages in Inbox.
Setting: This option allows you to set the push
message receiving options.
Always: push messages always comes in.
Never: push messages never comes in.
Optional: Only the push messages whose setting
matches to the number in his option come in. The
preset number is SMS service centre. You can also
edit the number.
Delete all: deletes all of the push messages.
Media Box
(Menu 7.2)
Delete: allows you to delete it.
Properties: allows you to view the detail
information of the photo.
Sounds (Menu 7.2.2)
This option allows you to listen to the recorded
voices and the melodies received from other
sources, such as the WAP sites or multimedia
messages.
Voices: allow you to listen to the recorded voices.
My sounds: allow you to listen to various melodies.
When you select a sound, press the Options soft
key to send, rename, delete, set as a ringtone or
view the properties.
For further details about these options, see the
options of the Images menu (Menu 7.3.1).
This menu option stores various media items from
other sources, such as the wireless web or
multimedia messages.
Delete All (Menu 7.2.3)
Images (Menu 7.2.1)
This option deletes all of the images and sounds in
the Media box.
This option allows you to view the images extracted
from EMS or MMS, downloaded from WAP or
EasyStudio PC soft ware.
Images: Press the Yes soft key to delete it,
otherwise press the No soft key.
To view an image, press the View soft key.
1. Scroll to a sound box and place a check mark
ahead it by pressing the Select soft key.
When you view a photo, press the Options soft key
to do the followings:
138
Sounds:
Selecting All places check marks on all of the
boxes.
139
Fun Box
2. If necessary, repeat step 1 to check another
box.
3. When you have finished checking, press the Ok
soft key.
4. When a confirming message appears, press the
Yes soft key to delete all of the sounds in the
box(es).
Otherwise, press the No soft key.
Memory Status (Menu 7.2.4)
Fun Box
MIDets to the list, you can download MIDlets from
the WAP sites.
To
Press the
find a game
Up or Down key.
run a game
Launch soft key.
view detail
information
Info soft key.
delete the game
Delete soft key in the
information display.
Media box and multimedia message boxes share a
given amount of memory in your phone.
SnowBallFight
The display shows the status of free and used
memory.
The goal of this game is to challenge and defeat the
snowball fight champions of four different teams.
You can see the used memory status of Media box
and multimedia message boxes by pressing the Left
or Right key.
JAVA World (Menu 7.3)
You can download MIDlets (Java applications
running on mobile phones) from various sources
using the WAP Browser and store them in your
phone.
Downloads (Menu 7.3.1)
A list of Java games is displayed. In basic, two preloaded MIDlets (Java games) are provided. If the
list of Java games is empty, a pop up message is
displayed to invite to download a new game. To add
140
Accessing a game
After loading the game, press any key twice to go
to the first menu screen. At the first menu screen,
press
key to play a game, or press
key to
access the main menu of this game.
Play: allows you to start a new game or a saved
game. Saved game allows you to continue the
beginning of last stage you played.
Instructions: shows you the explanation of control
keys, offense items and defense items.
Configuration: allows you to turn the sound,
vibration on or off and select the game speed from
1 to 5.
Quit: quits the game and returns to the downloads
menu screen.
141
Fun Box
Fun Box
Playing a game
BubbleSmile
Move the character along the street using the
navigation key. If you have enough gold coins which
you can earn while fighting to buy items, you can
buy defense items at the drug store and offense
items at the item shop. Move the character to the
team of current stage and press
key to select it.
When the snowball fight game starts, hit the rival
kids with snowballs and avoid theirs. While fighting
you can use items you have. If you raise enough
mana, you can also use special attack. You should
win all fights in four stages in order to challenge the
champions of the snowball fight.
BubbleSmile is a arcade puzzle game.
Key Commands
• Skilled mode: you have to make more than 4
bubbles disappear at once for the gauge at the
skill bar increase. If 3 or none of bubbles
disappear, then the gauge decreases.
4/6 or Left/Right: move left or right
2, 5 or Up, :control the distance at the first press
and throw the snowball at the next press.
Accessing a game
After loading the game, you will see the following
options, press key to select one of them:
Start game: allows you to start a new game with
timed mode or skilled mode.
• Timed mode: you have to achieve the best score
before gauge disappear at the time bar. When
you get the same coloured bubble together,
gauge at the time bar increases.
8 or Down: use the special attack depending on
your mana.
Continue: allows you to continue the last game
you played. The menu is only available when a
game has already been played.
3: enters item mode to use your item, select the
item you want to use by pressing 2, 5, Up or key.
High score: shows you the high score table.
Special attacks
How to play: shows you the instruction of this
game.
Level 1: Aurora, all enemies are hit by a snowball.
Option: allows you to set the sound on or off
Level 2: Ice dragon, all enemies are hit by a
snowball and frozen for 8 seconds.
Playing a game
Level 3: Icicle storm, double powered snowball
attack to all enemies and decreasing enemies’
attack accuracy for 10 seconds.
142
Your score goes up when you remove the bubbles.
Only when more than 3 same coloured bubbles line
up horizontally or diagonally, they disappear. To line
up the bubbles, move the band rounding three
bubbles to suitable place and rotate it. When the
game is over, your score is ranked on the high score
board if it is within third.
143
Fun Box
Key Commands
2, 4, 6, 8, or navigation key: move the band up,
down, left or right
1: rotate the bubbles in the band counterclockwise
3: rotate the bubbles in the band clockwise
DNS Setting (Menu 7.3.2)
The DNS (Domain Name Server) address to connect
the Java server is automatically set when making
data call set up. The address is provided by the
network operator automatically, but you can change
it manually at this menu.
Memory Status (Menu 7.3.3)
You can check the free space for Java download.
The display also shows the total memory and used
memory.
Using ALS (Alternate
Line Service)
The ALS feature enables two lines to be associated
with one SIM card. Consequently, you can make
and receive calls on either line. If you subscribe to
this network service, a few additional menu options
enable you to set up this feature.
Note: Please contact your service provider to check
the availability of this feature and how to
subscribe to ALS.
Selecting a Line
You can select a line for each call via the Active
line menu option (Menu 6.6). For further details,
refer to page 131.
Editing the Line Name
You can edit the name of each line via the Own
number menu option.
When you edit the name of a line, this name
replaces “Line 1” or “Line 2”, as applicable. For
further details, refer to page 63.
Setting the Ring Type
To distinguish between incoming calls on the two
lines, you can select a different ring tone for each
line via the Incoming calls menu option (Menu
3.1). See page 95 for further details.
144
145
Using ALS (Alternate Line Service)
Solving Problems
Setting Call Diverting Options
You can set up call diverting via the Call diverting
menu option (Menu 6.1). This service reroutes
incoming calls on the line of your choice to a
specified number. For further details, see page 124.
Viewing Call Information
You can view call times and last call cost
information for each line. For further details, see
page 93.
Before contacting the after-sales service, perform
the following simple checks. They may save you the
time and expense of an unnecessary service call.
When you switch your phone on, the
following messages may appear
No SIM card
Check that the SIM card is correctly installed.
Phone locked Enter password
The Phone lock feature is enabled. You must enter
the phone’s password before you can use the
phone.
Enter PIN
• You are using your phone for the first time. You
must enter the Personal Identification Number
supplied with the SIM card.
• The PIN check feature is enabled. Every time the
phone is switched on, you must enter the PIN. To
disable this feature, use the PIN check menu
option (Menu 4.5.1). See page 104.
Enter PUK
The PIN was entered wrongly three times in
succession and the phone is now blocked. Enter the
PUK supplied by your network operator.
146
147
Solving Problems
“No service” displays
• The network connection was lost. You may be in a
weak reception area (in a tunnel or surrounded
by buildings). Move and try again.
• You are trying to access an option for which you
have not taken out a subscription with your
service provider. Contact the service provider for
further details.
Solving Problems
The phone starts beeping and “Battery
Low” flashes on the display
The battery is insufficiently charged. Replace the
battery and recharge it.
The audio quality of the call is poor
You have entered a number but it was
not dialled
• Check the signal strength indicator on the display
(
); the number of bars indicates the signal
strength from strong (
) to weak ( ).
• Try moving the phone slightly or moving closer to
a window if you are in a building.
• Have you pressed the
key?
• Are you accessing the right cellular network?
• You may have set an outgoing call barring option.
No number is dialled when you recall a
Phonebook entry
Your correspondent cannot reach you
• Is your phone switched on (the
key pressed
for more than one second)?
• Are you accessing the right cellular network?
• You may have set an incoming call barring option.
Your correspondent cannot hear you
speaking
• Have you switched off the microphone (Mute
appears)?
• Are you holding the phone close enough to your
mouth? The microphone is located at the bottom
of the phone.
148
• Check that the number has been stored correctly,
by using the Phonebook Search feature.
• Re-store them, if necessary.
If the above guidelines do not help you to solve
the problem, take a note of:
• the model and serial numbers of your phone
• your warranty details
• a clear description of the problem
Then contact your local dealer or Samsung
after-sales service.
149
Access Codes
Access Codes
PIN2
There are several access codes that are used by
your phone and its SIM card. These codes help you
protect the phone against unauthorised use.
Some access codes can be changed using the
Security menu option (Menu 4.5). See page 104
for further details.
Phone Password
The Phone lock feature (see page 105) uses the
phone password to protect your phone against
unauthorised use.
The phone password is supplied with the phone and
is preset to “00000000” at the factory. To change
the password, use the Change password menu
option (Menu 4.5.4). See page 105.
PIN
The PIN (Personal Identification Number) protects
your SIM card against unauthorised use. It is
usually supplied with the SIM card. When the PIN
Check feature is enabled (see page 104), you must
enter the PIN each time you switch on the phone.
The PIN2, supplied with some SIM cards, is required
to access some functions, such as charging unit
counters. These functions are only available if
supported by your SIM card.
If you key in an incorrect PIN2 three times in
succession, key in the PUK2 and press the Ok soft
key to unlock the phone. Key in a new PIN2 and
press the Ok soft key. Key in the new PIN2 again
and press the Ok soft key.
PUK
The PUK (PIN Unblocking Key) is required to change
a blocked PIN. The PUK may be supplied with the
SIM card. If not, contact your local service provider.
If you key in an incorrect PUK ten times in
succession, the SIM card cannot be used anymore.
Contact your service provider for a new card.
You cannot change the PUK. If you lose the code,
contact your service provider.
If you key in an incorrect PIN three times in
succession, key in the PUK and press the Ok soft
key to unlock the phone. Key in a new PIN and
press the Ok soft key. Key in the new PIN again and
press the Ok soft key.
150
151
Access Codes
PUK2
Health and Safety
Information
The PUK2, supplied with some SIM cards, is
required to change a blocked PIN2.
If you key in an incorrect PUK2 ten times in
succession, you cannot use the functions requiring
the PIN2. Contact your service provider for a new
card.
You cannot change the PUK2. If you lose the code,
contact your service provider.
Call Barring Password
The 4-digit call barring password is required when
you use the Call Barring function. You obtain the
password from your service provider when you
subscribe to this function.
You can change this password using the Call
barring menu option (Menu 6.2). For further
details, see page 128.
Exposure to Radio-Frequency Energy
(SAR Information)
This phone meets European Union (EU)
requirements concerning exposure to radio waves.
Your mobile phone is a radio transmitter and
receiver. It is designed and manufactured, so as not
to exceed the limits for exposure to radio-frequency
(RF) energy, as recommended by the EU Council.
These limits are part of comprehensive guidelines
and establish permitted levels of RF energy for the
general population. The guidelines were developed
by independent scientific organisations through the
periodic and thorough evaluation of scientific
studies. The limits include a substantial safety
margin designed to ensure the safety of all persons,
regardless of age and health.
The exposure standard for mobile phones employs
a unit of measurement known as SAR (Specific
Absorption Rate). The SAR limit recommended by
the EU Council is 2.0W/kg.*
* The SAR limit for mobile phones used by the public is
2.0 watts/kilogram (W/kg) averaged over ten grams of
body tissue. The limit incorporates a substantial margin
of safety to give additional protection for the public and
to account for any variations in measurements. The SAR
values may vary depending on national reporting
requirements and the network band.
152
153
Health and Safety Information
SAR tests are conducted using standard operating
positions with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest
certified power level, the actual SAR level of the
phone while operating can be well below the
maximum value. This is because the phone is
designed to operate at multiple power levels so as
to use only the power required to reach the
network. In general, the closer you are to a base
station, the lower the power output of the phone.
The highest SAR value for this model phone when
tested for compliance against the standard was
0.845W/kg. While there may be differences
between the SAR levels of various phones and
various positions, they all meet the EU
requirements for RF exposure.
Precautions When Using Batteries
• Never use any charger or battery that is
damaged in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base
station, it uses less power; talk and standby time
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
• Battery charging time depends on the remaining
battery charge and the type of battery and
charger used. The battery can be charged and
discharged hundreds of times, but it will
gradually wear out. When the operation time
(talk time and standby time) is noticeably shorter
than normal, it is time to buy a new battery.
154
Health and Safety Information
• If left unused, a fully charged battery will
discharge itself over time.
• Use only Samsung-approved batteries and
recharge your battery only with Samsungapproved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave
the battery connected to a charger for more than
a week, since overcharging may shorten its life.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
• Do not leave the battery in hot or cold places,
such as in a car in summer or winter conditions,
as you will reduce the capacity and lifetime of the
battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery
may temporarily not work, even when the battery
is fully charged. Li-ion batteries are particularly
affected by temperatures below 0 °C (32 °F).
• Do not short-circuit the battery. Accidental shortcircuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between
the + and – terminals of the battery (metal strips
on the battery), for example when you carry a
spare battery in a pocket or bag. Short-circuiting
the terminals may damage the battery or the
object causing the short-circuiting.
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
155
Health and Safety Information
Road Safety
Your wireless phone gives you the powerful ability
to communicate by voice, almost anywhere,
anytime. But an important responsibility
accompanies the benefits of wireless phones, one
that every user must uphold.
When driving a car, driving is your first
responsibility. When using your wireless phone
behind the wheel of a car, practice good common
sense and remember the following tips.
1. Get to know your wireless phone and its
features, such as speed dial and redial. If
available, these features help you to place your
call without taking your attention off the road.
2. When available, use a hands-free device. If
possible, add an extra layer of convenience and
safety to your wireless phone with one of the
many hands-free accessories available today.
3. Position your wireless phone within easy reach.
Be able to access your wireless phone without
removing your eyes from the road. If you get an
incoming call at an inconvenient time, let your
voice mail answer it for you.
4. Let the person you are speaking with know you
are driving; if necessary, suspend the call in
heavy traffic or hazardous weather conditions.
Rain, sleet, snow, ice and even heavy traffic can
be hazardous.
5. Do not take notes or look up phone numbers
while driving. Jotting down a To Do list or
flipping through your Phonebook takes your
156
Health and Safety Information
attention away from your primary responsibility,
driving safely.
6. Dial sensibly and assess the traffic; if possible,
place calls when you are not moving or before
pulling into traffic. Try to plan calls when your
car will be stationary. If you need to make a call
while moving, dial only a few numbers, check
the road and your mirrors, then continue.
7. Do not engage in stressful or emotional
conversations that may be distracting. Make the
people with whom you are talking aware that
you are driving and suspend conversations that
have the potential to divert your attention from
the road.
8. Use your wireless phone to call for help. Dial the
emergency number in the case of fire, traffic
accident or medical emergencies. Remember, it
is a free call on your wireless phone!
9. Use your wireless phone to help others in
emergencies. If you see a car accident, crime in
progress or other serious emergency where lives
are in danger, call the emergency number, as
you would want others to do for you.
10.Call roadside assistance or a special nonemergency wireless assistance number when
necessary. If you see a broken-down vehicle
posing no serious hazard, a broken traffic signal,
a minor traffic accident where no one appears
injured, or a vehicle you know to be stolen, call
roadside assistance or any other special nonemergency wireless number.
157
Health and Safety Information
Operating Environment
Remember to follow any special regulations in force
in any area and always switch off your phone
whenever it is forbidden to use it, or when it may
cause interference or danger.
When connecting the phone or any accessory to
another device, read its user’s guide for detailed
safety instructions. Do not connect incompatible
products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation
of the equipment and for the safety of personnel, it
is recommended that the equipment should only be
used in the normal operating position (held to your
ear with the antenna pointing over your shoulder).
Health and Safety Information
Persons with pacemakers:
• should always keep the phone more than 15 cm
(6 inches) from their pacemaker when the phone
is switched on
• should not carry the phone in a breast pocket
• should use the ear opposite the pacemaker to
minimise potential interference
If you have any reason to suspect that interference
is taking place, switch off your phone immediately.
Hearing Aids
Some digital wireless phones may interfere with
some hearing aids. In the event of such
interference, you may wish to consult your hearing
aid manufacturer to discuss alternatives.
Other Medical Devices
Electronic Devices
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against
the RF signals from your wireless phone. Consult
the manufacturer to discuss alternatives.
Pacemakers
If you use any other personal medical devices,
consult the manufacturer of your device to
determine if it is adequately shielded from external
RF energy. Your physician may be able to assist you
in obtaining this information. Switch off your phone
in health care facilities when any regulations posted
in these areas instruct you to do so. Hospitals or
health care facilities may be using equipment that
could be sensitive to external RF energy.
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be
maintained between a wireless phone and a
pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent
with the independent research and
recommendations of Wireless Technology Research.
158
159
Health and Safety Information
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted Facilities
Switch off your phone in any facility where posted
notices require you to do so.
Potentially Explosive Atmospheres
Health and Safety Information
Emergency Calls
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well
as user-programmed functions, which cannot
guarantee connection in all conditions. Therefore,
you should never rely solely on any wireless phone
for essential communications (medical
emergencies, for example).
Remember, to make or receive any calls the phone
must be switched on and in a service area with
adequate signal strength. Emergency calls may not
be possible on all wireless phone networks or when
certain network services and/or phone features are
in use. Check with local service providers.
To make an emergency call, proceed as follows.
Switch off your phone when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause
an explosion or fire resulting in bodily injury or even
death.
Users are advised to switch off the phone while at a
refuelling point (service station). Users are
reminded of the need to observe restrictions on the
use of radio equipment in fuel depots (fuel storage
and distribution areas), chemical plants or where
blasting operations are in progress.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include
below deck on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas
(such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust
or metal powders, and any other area where you
would normally be advised to turn off your vehicle
engine.
160
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present
location (for example, 112 or any other official
emergency number). Emergency numbers vary
by location.
3. Press the
key.
If certain features are in use (call barring, for
example), you may first need to deactivate those
features before you can make an emergency call.
Consult this document and your local cellular
service provider.
When making an emergency call, remember to give
all the necessary information as accurately as
possible. Remember that your phone may be the
only means of communication at the scene of an
accident; do not cut off the call until given
permission to do so.
161
Health and Safety Information
Other Important Safety Information
• Only qualified personnel should service the phone
or install the phone in a vehicle. Faulty
installation or service may be dangerous and may
invalidate any warranty applicable to the device.
• Check regularly that all wireless phone
equipment in your vehicle is mounted and
operating properly.
• Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as
the phone, its parts or accessories.
• For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not
place objects, including both installed or portable
wireless equipment in the area over the air bag or
in the air bag deployment area. If wireless
equipment is improperly installed and the air bag
inflates, serious injury could result.
• Switch off your phone before boarding an aircraft.
The use of wireless phones in aircraft may be
dangerous to the operation of the aircraft, and is
illegal.
• Failure to observe these instructions may lead to
the suspension or denial of telephone services to
the offender, or legal action, or both.
Care and Maintenance
• Keep the phone and all its parts and accessories
out of the reach of small children’s.
• Keep the phone dry. Precipitation, humidity and
liquids contain minerals that will corrode
electronic circuits.
162
Health and Safety Information
• Do not touch the phone with a wet hand while it
is charging. Doing so may cause an electric shock
to you or damage to the phone.
• Do not use or store the phone in dusty, dirty
areas, as its moving parts may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
• Do not store the phone in cold areas. When the
phone warms up to its normal operating
temperature, moisture can form inside the
phone, which may damage the phone’s electronic
circuit boards.
• Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it
with a soft cloth slightly dampened in a mild
soap-and-water solution.
• Do not paint the phone. Paint can clog the
device’s moving parts and prevent proper
operation.
• Do not put the phone in or on heating devices,
such as a microwave oven, a stove or a radiator.
The phone may explode when overheated.
• Use only the supplied or an approved
replacement antenna. Unauthorised antennas or
modified accessories may damage the phone and
violate regulations governing radio devices.
• If the phone, battery, charger or any accessory is
not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
163
Glossary
Glossary
GPRS (General Packet Radio Service)
To help you understand the main technical terms
and abbreviations used in this booklet and take full
advantage of the features of your mobile phone,
here are a few definitions.
ALS (Alternate Line Service)
Capability of associating two lines with one SIM
card. With this service, you can make and receive
calls on either line, as required.
Call Barring
Ability to restrict outgoing and incoming calls.
Call Diverting
Ability to reroute calls to another number.
Call Holding
New non-voice value-added service that allows
information to be sent and received across a mobile
telephone network. GPRS guaranties continuous
connection to the Internet for mobile phone and
computer users. It is based on the Global System
for Mobile Communication (GSM) circuit-switched
cellular phone connections and the Short Message
Service (SMS).
GSM
(Global System for Mobile Communication)
International standard for cellular communication,
guaranteeing compatibility between the various
network operators. GSM covers most European
countries and many other parts of the world.
Multiparty Calling
Ability to put one call on standby while answering or
making another call; you can then switch between
the two calls, as required.
Ability to establish a conference call involving up to
five additional parties.
Call Waiting
PIN (Personal Identification Number)
Ability to inform users that they have an incoming
call when engaged on another call.
Security code that protects the phone/SIM against
unauthorised use. The PIN is supplied by the
service provider with the SIM card. It may be a four
to eight-digit number and can be changed, as
required.
CLI (Caller Line Identification) Services
Services allowing subscribers to view or block the
telephone numbers of callers.
EMS (Enhanced Message Service)
Network service sending and receiving messages
that include images, sounds and animations to and
from another user without having to speak to the
correspondent.
164
PUK (PIN Unblocking Key)
Security code used to unlock the phone when an
incorrect PIN has been entered three times in
succession. The eight-digit number is supplied by
the service provider with the SIM card.
165
Glossary
Roaming
Use of your phone when you are outside your home
area (when travelling for example).
SIM (Subscriber Identification Module)
Card containing a chip with all the information
required to operate the phone (network and
memory information, as well as the subscriber’s
personal data). The SIM card fits into a small slot
on the back of the phone and is protected by the
battery.
SMS (Short Message Service)
Network service sending and receiving messages to
and from another subscriber without having to
speak to the correspondent. The message created
or received can be displayed, received, edited or
sent.
Soft Keys
Two keys marked
purpose of which:
and
on the phone, the
• varies according to the function that you are
currently using
• is indicated on the bottom line of the display just
above the corresponding key
Voice Mail
Computerised answering service that automatically
answers your calls when you are not available,
plays a greeting (optionally in your own voice) and
records a message.
166
167
➃ Press the Select soft key
to confirm.
➂ Scroll with the Up or
Down key through the
list of options until the
required option is
selected.
➁ Scroll with the Left or
Down key through the
main menus until you
reach the required
menu.
➀ Press the Menu soft key
in Idle mode.
Each of the two soft keys (
and
)
performs the function indicated by the
text above them, on the bottom line on
the display.
Access
the Menu
Functions
Press the
Press the
End a Call
Answer a
Call
Adjust the
Volume
➀ Enter the number.
➁ Press the
key.
Make a Call
Press the volume keys
on the left side of the
phone.
key.
key.
Press and hold the
key.
Switch On/
Off
SGH-X100A GPRS Telephone
Quick Reference Card
Enter the SIM location,
press the
key, and press
the
key.
In Idle mode, hold down
the appropriate key (2 to
9).
Or, press the key and the
key.
key twice.
SpeedDial
Press and hold the 1 key.
Press the
Dial a
Number
in Your
SIM Card
Redial the
Last
Number
Listen to
Your
Voice Mail
Search for
a Number
in
Phonebook
Store
Numbers in
Phonebook
➀ Press the Phonebook
soft key in Idle Mode.
➁ Select Find name.
➃ Enter a name.
➄ Press the Ok soft key.
➅ Press the Left or Right
key, if necessary.
➆ Press the
key to dial.
➀ Enter the number.
➁ Press the Save soft
key.
➂ Select the memory
type and ress the Select
soft key.
➃ If you select Phone,
select the number type
and press the Select
soft key.
➄ Enter the name and
press the Ok soft key.
➅ If you select SIM, enter
the location number and
press the Ok soft key.
168