Untitled - Amazon Web Services

NetLinx NI-Series Controllers
For Small or Medium Rooms (7, 8 or 15 Control Ports)...............
356 – 364
For Large or Multiple Rooms (30 or 31 Control Ports).365 – 373
NetLinx Communication Gateways
(utilizes KNX communication protocol)..................................... 375
NetLinx Cards and Shells
(select the right card for the application).......................... 374, 376
Accessories....................................................................... 377 – 383
central controllers
I NTRO D U CT I ON c e n t r a l CONTROLLERS
RENOWNED RELIABILITY
Ensuring Every Command is Carried Out the First Time
AMX Central Controllers are synonymous with reliability, flexibility, and security. As the brains of every AMX control system,
the NetLinx family of products are designed to be a true IT standards-based, secure solution with remote monitoring and
management using a client-server architecture interfacing with the AMX Resource Management Suite software applications.
Furthermore, our command architecture supports net-centric management of devices – which simplifies equipment
management and maintenance and lowers total cost of ownership. In fact, they use the same VxWorks Real-Time Operating
System to control space shuttles and defense systems.
SYSTEM DIAGRAM
NetLinx Central Controllers can control large numbers of AMX
and third party devices via RS232, IP, IR and Contact Closure.
354
US S A L ES A ND S U PPORT 8 0 0 . 2 2 2 . 0 1 9 3 • I NTER NATI ONA L S A L ES A ND S U PPORT +1 . 4 6 9 . 6 2 4 . 74 0 0 • www.a m x.c o m
© January 2013 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
I NTRO D U CT I ON c e n t r a l CONTROLLERS
In keeping with our philosophy of providing flexible and open solutions AMX provides 2 ways to use NetLinx controllers.
We have a family of integrated controllers (the NI family) that come in prebuilt configurations. There are also a variety of
components that can be used to extend the capabilities of NI controllers or alternatively to create a custom NetLinx master
configuration with the exact specifications required for an installation.
Note : A MX has a fam ily of dev elopme n t to o l s to he l p i n te gra to rs pro g ra m. The se so f t w a re a ppl i c a t i o ns ra nge f ro m A M Xho m e a nd A M Xm e e t i ngro o m f o r si m pl i f i e d, w i z a rd-l ik e p r o g r a m m in g
to N e tL i n x Studio for pr ogr am m ing th e mo st so p hi sti ca te d co n tro l syste m so l u t i o ns. A nd o ur dra g-a nd-dro p so f t w a re , V i sua l A rc hi t e c t , w hi c h o f f e rs pro gra m m i ng f l e x i bi l i t y, a s w e ll a s a n
e a s y to u s e inter fac e.
NetLinx NI-Series Controllers
3000 R E S EARCH D RIVE, RICH ARDSON, TX 75082 • 800.222.0193 • 469.624.7 1 5 3 f a x • TEC H NI C A L S U PPORT 8 0 0 . 9 3 2 . 6 9 9 3
© January 2013 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
CONTROLLERS COMPARISON CHART
355
c e n t r a l CONTROLLERS
2 | 0 | 1 | 4
S e ri a l
NI-700
n
R e l ay
n
IR
n
D ig it a l I/ O
NetLinx Integrated Controller
(FG2105-70)
OVERVIEW
The NI-700 unit is geared to meet the specific control and
automation needs of a single room environment, in which both
T RAI NI NG AVAI LABLE
Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s ,
A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ t ra i n i n g
price and functionality are the driving requirements. The NI-700
is configured to control a limited number of video players,
projectors, lights, thermostats, and other electronic equipment.
AWARD W I NNER
The NI -7 0 0 w a s a w a rde d t he “ Hi gh I m pac t P r odu c t o f t h e Ye a r ”
f ro m C E Pro .
COMMON APPLICATIONs
Ideal for single-room environments with a limited number of
devices such as classrooms, conference rooms, hotel rooms and
other applications.
D-T OOLS C ERT I FI ED P RODUC T
Thi s pro duc t c a n be f o und i n t he D-To o l s m a nuf a ct u r e r p r o d u ct
da t a ba se a nd spe c i f i e d a s a t hi rd pa rt y de v i c e w h e n b u ild in g a n d
pro po si ng a sy st e m usi ng D-To o l s S y st e m I nt e gra t o r s o f t wa r e .
FEATURES
•Ultra-fast 304 MIPS processor
•2 Configurable RS-232 / RS-422 / RS-485 Serial Ports
•1 IR/Serial Port
•1 IR Receiver Port
•4 Digital I/O Channels
REV I T BI M
Thi s pro duc t i s pa rt o f t he A ut o de sk R e v i t da t a ba s e a n d ca n b e
spe c i f i e d i n de si gns f o r B ui l di ng I nf o rm a t i o n M o d e lin g ( B IM) . D o wn lo a d
t he a sso c i a t e d R e v i t . rf a f i l e f ro m t he A ut o de sk S E E K We b s it e . It is
a l so se a rc ha bl e unde r ‘ A M X’ i n a n y A ut o de sk a pp lica t io n .
•1 Ethernet 10/100 Port
•1 AxLink Connector
•64 MB RAM
•32 MB Flash Memory
•512 KB Non-Volatile Memory
C OUNT RY OF ORI GI N: M EX I C O
To sa t i sf y t he re qui re m e nt s/re gul a t i o ns o f e x i st i n g o r f u t u r e g o ve r n m e n t
pro gra m s, t hi s t w o -l e t t e r c o de i s be i ng pro v i de d t o d e s ig n a t e t h e
c o unt r y o f o ri gi n f o r t hi s pro duc t .
•AMX Device Discovery enabled
•JITC Compliant
356
JI T C T ES T ED
Thi s pro duc t ha s be e n t ho ro ughl y t e st e d f o r ne t w o r k s e cu r it y b y t h e
J o i nt I nt e ro pe ra bi l i t y Te st C o m m a nd (J I TC ) di v i si o n o f t h e D e f e n s e
I nf o rm a t i o n S y st e m s A ge ncy (DI S A ) unde r De pa rt m e n t o f D e f e n s e ( D o D )
Di re c t i v e 8 5 0 0 . 0 1 E, Do D I nst ruc t i o n 8 5 0 0 . 2 a nd D IS A Fie ld S e cu r it y
Ope ra t i o n S e c uri t y Te c hni c a l I m pl e m e nt a t i o n G ui d e s ( S T IG ) . It a ch ie ve d
a pe rf e c t sc o re i n t he J I TC I P Vul ne ra bi l i t y t e st i ng wit h n o H ig h , Me d iu m
o r L o w i m pa c t f i ndi ngs.
US S A L ES A ND S U PPORT 8 0 0 . 2 2 2 . 0 1 9 3 • I NTER NATI ONA L S A L ES A ND S U PPORT +1 . 4 6 9 . 6 2 4 . 74 0 0 • www.a m x.c o m
© January 2013 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
N I - 7 0 0 c e n t r a l CONTROLLERS
I R LED (r ed )
A C LO SE R LOOK
I /O LEDs (y el l o w )
Li n k /Acti v e-S tatu s -Ou t p u t - I n p u t
(g r een /r ed /y el l o w )
I D P u s h b u tto n
Pr ogr am Por t
C o n fi g u r ati o n
I R RX LED (r ed )
DI P s w i tch
S er i al RS -2 3 2 /4 2 2 /4 8 5 T X /RX
LEDs (r ed /y el l o w )
R S-2 3 2 /4 2 2 /4 8 5 (Por ts 1 & 2)
Eth er n et
PWR
I R/S er i al
(Po r t 3 )
IR RX
(Por t 5)
I/ O (Por t 4 )
Ax Li n k p o r t
Ax Li n k LED (g r een )
3000 R E S EARCH D RIVE, RICH ARDSON, TX 75082 • 800.222.0193 • 469.624.7 1 5 3 f a x • TEC H NI C A L S U PPORT 8 0 0 . 9 3 2 . 6 9 9 3
© January 2013 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
357
N I - 7 0 0 c e n t r a l CONTROLLERS
SPECIFICATIONS
rear panel connectors
DIMENSIONS (HWD)
• RS-232/422/485 (Ports 1 & 2)
• IR RX (Port 5)
• Digital I/O (Port 4)
• IR/Serial (Port 3)
• AxLink LED
• AxLink Port: 4-pin 3.5 mm mini-Phoenix (male) connector provides data and
power to external control devices
• Ethernet Port: RJ-45 port for 10/100 Mbps communication. LEDs show
communication activity, connection status, speeds, and mode information:
- SPD (speed) - Yellow LED lights On when the connection speed is 100 Mbps
and turns Off when the speed is 10 Mbps.
- L/A (link/activity) - Green LED lights On when the Ethernet cables are
connected and terminated correctly, and blinks when receiving Ethernet
data packets.
• Power Port
• 1 9/16” x 5 9/16” x 5 1/8” (4.01 cm x 14.10 cm x 13.00 cm)
• RU: 1
WEIGHT
1.30 lbs (590 g)
POWER
• 280 mA @ 12 VDC
• Power requirements are usage dependant
enclosure
Metal with black matte finish
ONBOARD MASTER
304 MIPS
certifications
FCC Part 15 Class B, CE, and IEC 60950
front panel components
• Program Port
• Configuration DIP Switch: Sets the communication parameters for the
Program port
• IR RX LED: Red LED lights when IR data is being received via the rear
IR RX port
• IR LED: Red LED lights during the transmission of IR or Serial data via the rear
IR port
• I/O LEDs: Four yellow LEDs light when the rear I/O channels 1 - 4 are active.
LED indicator for each I/O port reflects the state of that particular port
• Serial LEDs
• LINK/ACT: Green LED lights when the Ethernet cable is connected and an
active link is established. This LED also blinks when receiving Ethernet
data packets
• Status: Green LED lights when the Controller is programmed and
communicating properly
• Output: Red LED lights when the Controller transmits data, sets channels
sends data strings, etc.
• Input: Yellow LED lights when the Controller receives data from button pushes,
strings, commands, channel levels, etc.
• ID Pushbutton: Sets the NetLinx ID (Device only) assignment for the device
358
ENVIRONMENTAL
• Operating Temperature: 0º C (32º F) to 50º C (122º F)
• Operating Humidity: 20% to 85% RH
• Heat Dissipation (Typical): 11.5 BTU/hr
included accessories
• 2-pin 3.5 mm mini-Phoenix female PWR connector (41-5025)
• 4-pin 3.5 mm mini-Phoenix female connector (41-5047)
• 6-pin 3.5 mm mini-Phoenix female I/O connector (41-5063)
• CC-NIRC IR Emitter
RECOMMENDED ACCESSORIES
DESCRIPTION
PART #
PAGE #
IRX-PP38
PSN6.5
PSN4.4 AC-RK
AC-SMB
CC-232 CC-NIRC Plasma Proof IR Sensor
6.5 Amp Power Supply 4.4 Amp Power Supply Accessory Rack Kit
Surface Mounting Bracket
RS232/422 Cables
IR Cables (FG460)
(FG423-41)
(FG423-45)
(FG515)
(FG525)
(FG10-752-04)
(FG10-000-11)
348
415
414
410
412
420
420
US S A L ES A ND S U PPORT 8 0 0 . 2 2 2 . 0 1 9 3 • I NTER NATI ONA L S A L ES A ND S U PPORT +1 . 4 6 9 . 6 2 4 . 74 0 0 • www.a m x.c o m
© January 2013 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
c e n t r a l CONTROLLERS
1 | 0 | 3 | 4
S e ri a l
n
R e l ay
n
IR
n
D ig it a l I/ O
NI-900
NetLinx Integrated Controller
(FG2105-90)
OVERVIEW
The NI-900 unit is designed to control and automate a variety of
devices in single rooms or multiple small rooms and is capable
T RAI NI NG AVAI LABLE
Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s ,
A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ t ra i n i n g
of supporting devices with a variety of communication formats. It
is configured to control a limited number of lights, thermostats,
video displays and other equipment.
COMMON APPLICATION
D-T OOLS C ERT I FI ED P RODUC T
Thi s pro duc t c a n be f o und i n t he D-To o l s m a nuf a c t u r e r p r o d u ct
da t a ba se a nd spe c i f i e d a s a t hi rd pa rt y de v i c e w h e n b u ild in g a n d
pro po si ng a sy st e m usi ng D-To o l s S y st e m I nt e gra t o r s o f t w a r e .
Perfect for single rooms or two or more small rooms with a limited
number of devices such as home theaters, MDUs, hotel rooms
and other environments.
FEATURES
• 1 Configurable RS-232 / RS-422 / RS-485 Serial port
REV I T BI M
Thi s pro duc t i s pa rt o f t he A ut o de sk R e v i t da t a ba s e a n d ca n b e
spe c i f i e d i n de si gns f o r B ui l di ng I nf o rm a t i o n M o d e lin g ( B IM) . D o w n lo a d
t he a sso c i a t e d R e v i t . rf a f i l e f ro m t he A ut o de sk S E E K We b s it e . It is
a l so se a rc ha bl e unde r ‘ A M X’ i n a n y A ut o de sk a pplica t io n .
• 3 IR / Serial ports
• 1 IR Receiver Port
• 4 Digital I/O ports
• 2 Communication Networks: AxLink and Ethernet (TCP/IP)
• 304 MIPS processor speed
C OUNT RY OF ORI GI N: M EX I C O
To sa t i sf y t he re qui re m e nt s/re gul a t i o ns o f e x i st i ng o r f u t u r e g o ve r n m e n t
pro gra m s, t hi s t w o -l e t t e r c o de i s be i ng pro v i de d t o d e s ig n a t e t h e
c o unt r y o f o ri gi n f o r t hi s pro duc t .
• 64 MB RAM
• 32 MB Memory
• 512 KB Non-Volatile Memory
• AMX Device Discovery enabled
•JITC Compliant
JI T C T ES T ED
Thi s pro duc t ha s be e n t ho ro ughl y t e st e d f o r ne t w o r k s e cu r it y b y t h e
J o i nt I nt e ro pe ra bi l i t y Te st C o m m a nd (J I TC ) di v i si on o f t h e D e f e n s e
I nf o rm a t i o n S y st e m s A ge ncy (DI S A ) unde r De pa rt me n t o f D e f e n s e ( D o D )
Di re c t i v e 8 5 0 0 . 0 1 E, Do D I nst ruc t i o n 8 5 0 0 . 2 a nd D IS A Fie ld S e cu r it y
Ope ra t i o n S e c uri t y Te c hni c a l I m pl e m e nt a t i o n G ui d e s ( S T IG ) . It a ch ie ve d
a pe rf e c t sc o re i n t he J I TC I P Vul ne ra bi l i t y t e st i ng w it h n o H ig h , Me d iu m
o r L o w i m pa c t f i ndi ngs.
3000 R E S EARCH D RIVE, RICH ARDSON, TX 75082 • 800.222.0193 • 469.624.7 1 5 3 f a x • TEC H NI C A L S U PPORT 8 0 0 . 9 3 2 . 6 9 9 3
© January 2013 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
359
N I - 9 0 0 c e n t r a l CONTROLLERS
A C LO SE R LOOK
IR L ED (r e d)
I/ O LED s (y e llow )
RS -2 3 2 /4 2 2 /4 8 5 (Po r t 1 )
IR RX L ED (r e d)
Pro gra m Po r t
Configur ation
D IP s w itc h
I R RX
(Po r t 6 )
I D P u s h b u tto n
I R/S er i al
(Po r ts 2 -4 )
Eth er n et
Ax Li n k p o r t
PWR
I /O (Po r t 5 )
Ax Li n k LED (g r een )
Ser ial RS-232/ 422/ 485
TX/ RX LED (r e d/ y ellow )
L ink/ Ac tiv e-Status - Ou tp u t-I n p u t
(gr e en/ r ed/ y ellow )
360
US S A L ES A ND S U PPORT 8 0 0 . 2 2 2 . 0 1 9 3 • I NTER NATI ONA L S A L ES A ND S U PPORT +1 . 4 6 9 . 6 2 4 . 74 0 0 • www.a m x.c o m
© January 2013 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
N I - 9 0 0 c e n t r a l CONTROLLERS
SPECIFICATIONS
DIMENSIONS (HWD)
rear panel connectors
• 1 9/16” x 5 9/16” x 5 1/8” (4.01 cm x 14.10 cm x 13 cm)
• RU: 1
• RS-232/422/485 (Port 1)
• IR RX (Port 6)
• Digital I/O (Port 5)
• IR/Serial (Ports 2 - 4)
• AxLink LED
• AxLink Port: 4-pin 3.5 mm mini-Phoenix (male) connector provides data and
power to external control devices
• Ethernet Port: RJ-45 port for 10/100 Mbps communication. LEDs show
communication activity, connection status, speeds, and mode information:
- SPD (speed) - Yellow LED lights On when the connection speed is 100 Mbps
and turns Off when the speed is 10 Mbps.
- L/A (link/activity) - Green LED lights On when the Ethernet cables are
connected and terminated correctly, and blinks when receiving Ethernet
data packets.
• Power Port: 2-pin 3.5 mm mini-Phoenix (male) connector
WEIGHT
1.30 lbs (590 g)
POWER
• 300 mA @ 12 VDC
• Power requirements are usage dependent
enclosure
Metal with black matte finish
ONBOARD MASTER
304 MIPS
certifications
FCC Part 15 Class B, CE, and IEC 60950
front panel components
• Program Port
• Configuration DIP Switch: Sets the communication parameters for the
Program port
• IR RX LED: Red LED lights when IR data is being received via the rear
IR RX port
• IR LEDs: Three red LEDs light during the transmission of IR or Serial data via
the rear IR port
• I/O LEDs: Four yellow LEDs light when the rear I/O channels 1-4 are active.
LED indicator for each I/O port reflects the state of that particular port
• Serial LEDs
• LINK/ACT: Green LED lights when the Ethernet cable is connected and an
active link is established. This LED also blinks when receiving Ethernet
data packets
• Status: Green LED lights when the Controller is programmed and
communicating properly
• Output: Red LED lights when the Controller transmits data, sets channels,
sends data strings, etc.
• Input: Yellow LED lights when the Controller receives data from button pushes,
strings, commands, channel levels, etc.
• ID Pushbutton: Sets the NetLinx ID (Device only) assignment for the device
ENVIRONMENTAL
• Operating Temperature: 0º C (32º F) to 50º C (122º F)
• Operating Humidity: 20% to 85% RH
• Heat Dissipation (Typical): 12.3 BTU/hr
included accessories
• 2-pin 3.5 mm mini-Phoenix female PWR connector (41-5025)
• 6-pin 3.5 mm mini-Phoenix female I/O connector (41-5063)
• Three CC-NIRC IR Emitters
• Two 4-pin 3.5 mm mini-Phoenix female connectors (41-5047)
RECOMMENDED ACCESSORIES
DESCRIPTION
PART #
PAGE #
IRX-PP38
PSN6.5
PSN4.4 AC-RK
AC-SMB
CC-232 CC-NIRC Plasma Proof IR Sensor
6.5 Amp Power Supply 4.4 Amp Power Supply Accessory Rack Kit
Surface Mounting Bracket
RS232/422 Cables
IR Cables (FG460)
(FG423-41)
(FG423-45)
(FG515)
(FG525)
(FG10-752-04)
(FG10-000-11)
348
415
414
410
412
420
420
3000 R E S EARCH D RIVE, RICH ARDSON, TX 75082 • 800.222.0193 • 469.624.7 1 5 3 f a x • TEC H NI C A L S U PPORT 8 0 0 . 9 3 2 . 6 9 9 3
© January 2013 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
361
c e n t r a l CONTROLLERS
3 | 4 | 4 | 4
S e ri a l
n
R e l ay
n
IR
n
D ig it a l I/ O
NI-2100
NetLinx Integrated Controller
NI-2100 Controller
(FG2105-04)
NI-2100 Controller with ICSNet
(FG2105-14)
OVERVIEW
The NI-2100 is ideal for control and automation of medium-sized
rooms and multi-room applications. The NI-2100 has 64MB
T RAI NI NG AVAI LABLE
Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s ,
A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ t ra i n i n g
of onboard RAM and is Device Discovery enabled to simplify
programming by standardizing device and function definitions,
default touch panel button assignments, and control and
feedback methods.
D-T OOLS C ERT I FI ED P RODUC T
Thi s pro duc t c a n be f o und i n t he D-To o l s m a nuf a ct u r e r p r o d u ct
da t a ba se a nd spe c i f i e d a s a t hi rd pa rt y de v i c e w h e n b u ild in g a n d
pro po si ng a sy st e m usi ng D-To o l s S y st e m I nt e gra t o r s o f t wa r e .
COMMON APPLICATION
The NI-2100 is a good fit for medium-sized rooms or multi-room
applications in home theaters, whole homes, hotel rooms and
other environments.
FEATURES
REV I T BI M
Thi s pro duc t i s pa rt o f t he A ut o de sk R e v i t da t a ba s e a n d ca n b e
spe c i f i e d i n de si gns f o r B ui l di ng I nf o rm a t i o n M o d e lin g ( B IM) . D o wn lo a d
t he a sso c i a t e d R e v i t . rf a f i l e f ro m t he A ut o de sk S E E K We b s it e . It is
a l so se a rc ha bl e unde r ‘ A M X’ i n a n y A ut o de sk a pp lica t io n .
•3 Configurable RS-232 / RS-422 / RS-485 Serial ports
•4 Relays
•4 IR / Serial ports
•4 Digital I/O ports
•2 Communication Networks: AxLink and Ethernet (TCP/IP)
C OUNT RY OF ORI GI N: M EX I C O
To sa t i sf y t he re qui re m e nt s/re gul a t i o ns o f e x i st i n g o r f u t u r e g o ve r n m e n t
pro gra m s, t hi s t w o -l e t t e r c o de i s be i ng pro v i de d t o d e s ig n a t e t h e
c o unt r y o f o ri gi n f o r t hi s pro duc t .
•404 MIPS processor speed
•64 MB RAM
•2 GB CompactFlash (upgradeable to 4 G)
•1 MB Non-Volatile Memory
•AMX Device Discovery enabled
•JITC Compliant
362
JI T C T ES T ED
Thi s pro duc t ha s be e n t ho ro ughl y t e st e d f o r ne t w o r k s e cu r it y b y t h e
J o i nt I nt e ro pe ra bi l i t y Te st C o m m a nd (J I TC ) di v i si o n o f t h e D e f e n s e
I nf o rm a t i o n S y st e m s A ge ncy (DI S A ) unde r De pa rt m e n t o f D e f e n s e ( D o D )
Di re c t i v e 8 5 0 0 . 0 1 E, Do D I nst ruc t i o n 8 5 0 0 . 2 a nd D IS A Fie ld S e cu r it y
Ope ra t i o n S e c uri t y Te c hni c a l I m pl e m e nt a t i o n G ui d e s ( S T IG ) . It a ch ie ve d
a pe rf e c t sc o re i n t he J I TC I P Vul ne ra bi l i t y t e st i ng wit h n o H ig h , Me d iu m
o r L o w i m pa c t f i ndi ngs.
US S A L ES A ND S U PPORT 8 0 0 . 2 2 2 . 0 1 9 3 • I NTER NATI ONA L S A L ES A ND S U PPORT +1 . 4 6 9 . 6 2 4 . 74 0 0 • www.a m x.c o m
© January 2013 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
N I - 2 1 0 0 c e n t r a l CONTROLLERS
A C LO SE R LOOK
I /O LEDs (y el l o w )
RS-232/ 422/ 485 TX/ RX LEDs (r ed /y el l o w )
L ink/ Ac tiv e-Status -Output-Input
RS-232/ 422/ 485 (Por ts 1-3)
Rel ay LEDs (r ed )
I R/S er i al LEDs (r ed )
I C S Net co v er p l ate
Eth er n et
PWR
Re lay s (Por t 4)
I/ O (Por t 9)
P r o g r am p o r t DI P s w i tch
I D P u s h b u tto n
IR/ Se r ial (Por ts 5 -8 )
3000 R E S EARCH D RIVE, RICH ARDSON, TX 75082 • 800.222.0193 • 469.624.7 1 5 3 f a x • TEC H NI C A L S U PPORT 8 0 0 . 9 3 2 . 6 9 9 3
© January 2013 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
Ax Li n k p o r t
Ax Li n k LED
(g r een )
363
N I - 2 1 0 0 c e n t r a l CONTROLLERS
SPECIFICATIONS
DIMENSIONS (HWD)
rear panel connectors
• 3 1/2” x 17” x 3 1/2” (8.8 cm x 43.2 cm x 8.8 cm)
• RU: 2
• RS-232/422/485 (Ports 1 - 3)
• ICSNet: Two RJ-45 connectors for ICSNet interface (provided by ICSNet
daughter card)
• ICSHub Out: RJ-45 connector provides data to a Hub connected to the
Controller (provided by ICSNet daughter card)
• Relay (Port 4)
• Digital I/O (Port 9)
• IR/Serial (Ports 5 - 8)
• Program Port
• Configuration DIP Switch: Sets the communication parameters for the
Program port
• ID Pushbutton
• Ethernet Port: RJ-45 port for 10/100 Mbps communication. LEDs show
communication activity, connection status, speeds, and mode information:
- SPD (speed) - Yellow LED lights On when the connection speed is 100 Mbps
and turns Off when the speed is 10 Mbps.
- L/A (link/activity) - Green LED lights On when the Ethernet cables are
connected and terminated correctly, and blinks when receiving Ethernet
data packets.
• AxLink LED: Green LED indicates the state of the AxLink port.
• AxLink Port: 4-pin 3.5 mm mini-Phoenix (male) connector that provides data
and power to external control devices
• Power Port: 2-pin 3.5 mm mini-Phoenix (male) connector.
WEIGHT
4.50 lbs (2.04 kg)
POWER
700 mA @ 12 VDC
enclosure
Metal with black matte finish
memory
• 64 MB SDRAM
• 1 MB of Non-volatile SRAM
COMPACT FLASH
2 GB Card or more (upgradeable)
ONBOARD MASTER
404 MIPS
certifications
FCC Part 15 Class B, CE, and IEC 60950
front panel components
• LINK/ACT: Green LED blinks when the Ethernet cables are connected and
terminated correctly. Also blinks when receiving Ethernet data packets
• Status: Green LED blinks to indicate that the system is programmed and
communicating properly
• Output: Red LED blinks when the Controller transmits data, sets channels and
sends data strings, etc.
• Input: Yellow LED blinks when the Controller receives data from button pushes,
strings, commands, channel levels, etc.
• RS-232/422/485 LEDs
• Relay LEDs
• IR/Serial LEDs
• I/O LEDs
• Rack-mount brackets: Provides an installation option for the Integrated
Controller to be mounted into an equipment rack, when used with the
Installation Kit (KA2105-01)
364
ENVIRONMENTAL
• Operating Temperature: 0° C (32° F) to 50° C (122° F)
• Operating Humidity: 20% to 85% RH
• Heat Dissipation (Typical): 28.7 BTU/hr
included acessories
• 2-pin 3.5 mm mini-Phoenix (female) PWR connector (41-5025)
• 4-pin 3.5 mm mini-Phoenix (female) AxLink connector (41-5047)
• 6-pin 3.5 mm mini-Phoenix female I/O connector (41-5063)
• 8-pin 3.5 mm mini-Phoenix female Relay connector (41-5083)
• Two CC-NIRC IR Emitters
• Two removable rack ears (62-2105-07)
RECOMMENDED ACCESSORIES
DESCRIPTION
PART #
PAGE #
PSN6.5
PSN4.4 NXA-ICSNET
NXA-CF2NI
CC-232 CC-NIRC 6.5 Amp Power Supply 4.4 Amp Power Supply NetLinx ICSNet Communication Network Card
CompactFlash Upgrade
RS232/422 Cables
IR Cables (FG423-41)
(FG423-45)
(FG2105-10)
(FG21116-xx)
(FG10-752-04)
(FG10-000-11)
415
414
383
382
420
420
US S A L ES A ND S U PPORT 8 0 0 . 2 2 2 . 0 1 9 3 • I NTER NATI ONA L S A L ES A ND S U PPORT +1 . 4 6 9 . 6 2 4 . 74 0 0 • www.a m x.c o m
© January 2013 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
c e n t r a l CONTROLLERS
7 | 8 | 8 | 8
S e ri a l
n
R e l ay
n
IR
n
D ig it a l I/ O
NI-3100
NetLinx Integrated Controller
(FG2105-05)
NI-3100/256 Controller with 256MB RAM
NI-3100 Controller
(FG2105-25)
NI-3100/256/ICS Controller with 256MB RAM and ICSNet (FG2105-35)
NI-3100/ICS Controller with ICSNet
(FG2105-15)
OVERVIEW
With the ability to integrate a large number of devices, the
NI-3100 controls a wide variety of components including audio/
T RAI NI NG AVAI LABLE
Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s ,
A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ t ra i n i n g
video conferencing, projectors, DVD and Blu-Ray players, lights,
thermostats and other electronic equipment found in larger
areas. With these technology-driven environments, the NI-3100
also provides solutions for future expansion and enables the
addition of more devices and control capabilities. Offers higher
D-T OOLS C ERT I FI ED P RODUC T
Thi s pro duc t c a n be f o und i n t he D-To o l s m a nuf a c t u r e r p r o d u ct
da t a ba se a nd spe c i f i e d a s a t hi rd pa rt y de v i c e w h e n b u ild in g a n d
pro po si ng a sy st e m usi ng D-To o l s S y st e m I nt e gra t o r s o f t w a r e .
performance with an ultra-fast processor, 64MB of onboard RAM
and is AMX Device Discovery enabled.
COMMON APPLICATION
The NI-3100 unit is ideally suited to the requirements of larger
areas or multiple rooms with advanced control and
REV I T BI M
Thi s pro duc t i s pa rt o f t he A ut o de sk R e v i t da t a ba s e a n d ca n b e
spe c i f i e d i n de si gns f o r B ui l di ng I nf o rm a t i o n M o d e lin g ( B IM) . D o w n lo a d
t he a sso c i a t e d R e v i t . rf a f i l e f ro m t he A ut o de sk S E E K We b s it e . It is
a l so se a rc ha bl e unde r ‘ A M X’ i n a n y A ut o de sk a pplica t io n .
automation features.
FEATURES
• 7 Configurable RS-232 / RS-422 / RS-485 Serial ports
• 8 Relays
C OUNT RY OF ORI GI N: M EX I C O
To sa t i sf y t he re qui re m e nt s/re gul a t i o ns o f e x i st i ng o r f u t u r e g o ve r n m e n t
pro gra m s, t hi s t w o -l e t t e r c o de i s be i ng pro v i de d t o d e s ig n a t e t h e
c o unt r y o f o ri gi n f o r t hi s pro duc t .
• 8 IR / Serial ports
• 8 Digital I/O ports
• 2 Communication Networks: AxLink and Ethernet (TCP/IP)
• 404 MIPS processor speed
•64 MB RAM or 256 MB RAM
•2 GB CompactFlash (upgradeable to 4 GB)
•1 MB Non-Volatile Memory
•AMX Device Discovery enabled
JI T C T ES T ED
Thi s pro duc t ha s be e n t ho ro ughl y t e st e d f o r ne t w o r k s e cu r it y b y t h e
J o i nt I nt e ro pe ra bi l i t y Te st C o m m a nd (J I TC ) di v i si on o f t h e D e f e n s e
I nf o rm a t i o n S y st e m s A ge ncy (DI S A ) unde r De pa rt me n t o f D e f e n s e ( D o D )
Di re c t i v e 8 5 0 0 . 0 1 E, Do D I nst ruc t i o n 8 5 0 0 . 2 a nd D IS A Fie ld S e cu r it y
Ope ra t i o n S e c uri t y Te c hni c a l I m pl e m e nt a t i o n G ui d e s ( S T IG ) . It a ch ie ve d
a pe rf e c t sc o re i n t he J I TC I P Vul ne ra bi l i t y t e st i ng w it h n o H ig h , Me d iu m
o r L o w i m pa c t f i ndi ngs.
•JITC Compliant
3000 R E S EARCH D RIVE, RICH ARDSON, TX 75082 • 800.222.0193 • 469.624.7 1 5 3 f a x • TEC H NI C A L S U PPORT 8 0 0 . 9 3 2 . 6 9 9 3
© January 2013 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
365
N I - 3 1 0 0 c e n t r a l CONTROLLERS
A C LO SE R LOOK
I /O LEDs (y el l o w )
RS-232/ 422/ 485 TX/ RX L EDs (r ed /y el l o w )
Link/ Ac tiv e-Status -Output-Input
Rel ay LEDs (r ed )
I R/S er i al LEDs (r ed )
I C S Net co v er p l ate
RS-232/ 422/ 485 (Por ts 1-7)
R e lay s (Por t 8)
I D P u s h b u tto n
DI P s w i tch
I/ O (Por t 17)
IR/ Se r ial (Por ts 9-16)
366
P r o g r am p o r t
PWR
Eth er n et
Ax Li n k p o r t
Ax Li n k LED
(g r een )
US S A L ES A ND S U PPORT 8 0 0 . 2 2 2 . 0 1 9 3 • I NTER NATI ONA L S A L ES A ND S U PPORT +1 . 4 6 9 . 6 2 4 . 74 0 0 • www.a m x.c o m
© January 2013 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
N I - 3 1 0 0 c e n t r a l CONTROLLERS
SPECIFICATIONS
DIMENSIONS (HWD)
rear panel connectors
• 3 1/2” x 17” x 3 1/2” (8.8 cm x 43.2 cm x 8.8 cm)
• RU: 2
• RS-232/422/485 (Ports 1 - 7)
• ICSNet: Two RJ-45 connectors for ICSNet interface (provided by ICSNet
daughter card)
• ICSHub Out: RJ-45 connector provides data to a Hub connected to the
Controller (provided by ICSNet daughter card)
• Relay (Port 8)
• Digital I/O (Port 17)
• IR/Serial (Ports 9 - 16)
• Program Port
• Configuration DIP Switch: Sets the communication parameters for the
Program port
• ID Pushbutton
• Ethernet Port: RJ-45 port for 10/100 Mbps communication. LEDs show
communication activity, connection status, speeds, and mode information:
- SPD (speed) - Yellow LED lights On when the connection speed is 100 Mbps
and turns Off when the speed is 10 Mbps.
- L/A (link/activity) - Green LED lights On when the Ethernet cables are
connected and terminated correctly, and blinks when receiving Ethernet
data packets.
• AxLink LED
• AxLink Port: 4-pin 3.5 mm mini-Phoenix (male) connector that provides data
and power to external control devices
• Power Port: 2-pin 3.5 mm mini-Phoenix (male) connector
WEIGHT
4.55 lbs (2.06 kg)
POWER
900 mA @ 12 VDC
enclosure
Metal with black matte finish
memory
•64 MB SDRAM (FG2105-05 & FG2105-15)
•256 MB RAM (FG2105-25 & FG2105-35)
•1 MB of Non-volatile SRAM
COMPACT FLASH
512 MB Card or more (upgradeable)
ONBOARD MASTER
404 MIPS
certifications
FCC Part 15 Class B, CE, and IEC 60950
front panel components
• LINK/ACT
• Status: Green LED blinks to indicate that the system is programmed and
communicating properly
• Output: Red LED blinks when the Controller transmits data, sets channels and sends data strings, etc.
• Input: Yellow LED blinks when the Controller receives data from button pushes,
strings, commands, channel levels, etc.
• RS-232/422/485 LEDs
• Relay LEDs
• IR/Serial LEDs
• I/O LEDs
• Rack-mount brackets: Provides an installation option for the Integrated
Controller to be mounted into an equipment rack, when used with the
Installation Kit (KA2105-01)
ENVIRONMENTAL
•Operating Temperature: 0° C (32° F) to 50° C (122° F)
•Operating Humidity: 20% to 85% RH
•Heat Dissipation (Typical): 36.9 BTU/hr
included accessories
• 2-pin 3.5 mm mini-Phoenix (female) PWR connector (41-5025)
• 4-pin 3.5 mm mini-Phoenix (female) AxLink connector (41-5047)
• 10-pin 3.5 mm mini-Phoenix (female) I/O connector (41-5107)
• Two 8-pin 3.5 mm mini-Phoenix female Relay connectors (41-5083)
• Two CC-NIRC IR Emitters
• Two removable rack ears (62-2105-07)
RECOMMENDED ACCESSORIES
DESCRIPTION
PART #
PAGE #
PSN6.5
PSN4.4 NXA-ICSNET
NXA-CF2NI
CC-232 CC-NIRC 6.5 Amp Power Supply 4.4 Amp Power Supply NetLinx ICSNet Communication Network Card
CompactFlash Upgrade
RS232/422 Cables
IR Cables (FG423-41)
(FG423-45)
(FG2105-10)
(FG21116-xx)
(FG10-752-04)
(FG10-000-11)
415
414
383
382
420
420
3000 R E S EARCH D RIVE, RICH ARDSON, TX 75082 • 800.222.0193 • 469.624.7 1 5 3 f a x • TEC H NI C A L S U PPORT 8 0 0 . 9 3 2 . 6 9 9 3
© January 2013 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
367
c e n t r a l CONTROLLERS
6 | 8 | 8 | 8
S e ri a l
NI-3101-SIG
n
R e l ay
n
IR
n
D ig it a l I/ O
Signature Series NetLinx Integrated Controller
®
(FG2105-08)
OVERVIEW
• 64 MB RAM
With its gloss-black face, blue power bar and blue and white
• 256 MB Flash Memory
status LEDs, the NI-3101-SIG can be placed on open racks, open
• 1 MB Non-Volatile Memory
shelves, tables, home theaters or behind the scenes in a rack.
• AMX Device Discovery enabled
Measuring just 1 rack unit (RU:1) high, the NI-3101-SIG frees up
• JITC Compliant
space for other components while the extended rack depth (10”)
simplifies rear connections.
With extremely fast 32-bit processing and 64MB of onboard RAM,
WAT C H T HE V I DEO
S e e t he NI -3 1 0 1 -S I G i n a c t i o n by w a t c hi ng t he v i d e o p r o f ile o n lin e
a t : www. am x . c om /as s ets /v i deos /NI -3 1 0 1 -S I G. m p 4
the NI-3101-SIG is capable of processing thousands of control
and automation commands per second. Whether your control
requirements are simple or sophisticated, the NI-3101-SIG is fast,
accurate and immediate. In addition, it features a convenient USB
T RAI NI NG AVAI LABLE
Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s ,
A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ t ra i n i n g
programming port to simplify configuration.
COMMON APPLICATION
The NI-3101-SIG is ideal for controlling devices in large areas and
multiple rooms. Its sleek styling and professional showroom finish
D-T OOLS C ERT I FI ED P RODUC T
Thi s pro duc t c a n be f o und i n t he D-To o l s m a nuf a ct u r e r p r o d u ct
da t a ba se a nd spe c i f i e d a s a t hi rd pa rt y de v i c e w h e n b u ild in g a n d
pro po si ng a sy st e m usi ng D-To o l s S y st e m I nt e gra t o r s o f t wa r e .
allow it to be displayed prominently in home theater
environments or work equally well behind the scenes in a rack.
C OUNT RY OF ORI GI N: M EX I C O
To sa t i sf y t he re qui re m e nt s/re gul a t i o ns o f e x i st i n g o r f u t u r e g o ve r n m e n t
pro gra m s, t hi s t w o -l e t t e r c o de i s be i ng pro v i de d t o d e s ig n a t e t h e
c o unt r y o f o ri gi n f o r t hi s pro duc t .
FEATURES
• 6 Configurable RS-232 / RS-422 / RS-485 Serial Ports
• 8 Relays
• 8 IR / Serial ports
• 8 Digital I/O ports
• 2 Communication Networks: AxLink and 10/100 Ethernet
(TCP/IP)
• Integrated USB programming port
• 404 MIPS processor speed
368
RECOMMENDED ACCESSORIES
DESCRIPTION
PART #
PAGE #
PSN6.5
PSN4.4 CC-232 CC-NIRC CC-NET CC-USB-NI
6.5 Amp Power Supply 4.4 Amp Power Supply RS232/422 Cables
IR Cables Cat5 Ethernet Cable USB Programming Cable (FG423-41)
(FG423-45)
(FG10-752-04)
(FG10-000-11)
(FG10-051-10)
(FG10-2105)
415
414
420
420
418
418
US S A L ES A ND S U PPORT 8 0 0 . 2 2 2 . 0 1 9 3 • I NTER NATI ONA L S A L ES A ND S U PPORT +1 . 4 6 9 . 6 2 4 . 74 0 0 • www.a m x.c o m
© January 2013 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
N I - 3 1 0 1 - S I G c e n t r a l CONTROLLERS
A C LO SE R LOOK
Po wer
Link/ Ac tiv e-Status -I/ O
Rel ay LEDs
RS-232/ 422/ 485 TX/ RX LEDs
R S-2 3 2 /4 2 2/ 485 (Por ts 1-6)
I /O (Po r t 1 7 )
Re lay s (Por t 8 )
I /O LEDs
I R/S er i al LEDs
C o n fi g u r ati o n
S w i tch es
I R/S er i al (Po r ts 9 -1 6 )
3000 R E S EARCH D RIVE, RICH ARDSON, TX 75082 • 800.222.0193 • 469.624.7 1 5 3 f a x • TEC H NI C A L S U PPORT 8 0 0 . 9 3 2 . 6 9 9 3
© January 2013 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
I D S w i tch
P r o g r am m i n g
Po r t
Ax Li n k
LED
Eth er n et
1 0 /1 0 0 Po r t
Po we r
12 VDC
A xL in k
Po rt
369
N I - 3 1 0 1 - S I G C e n t r a l CONTROLLERS
SPECIFICATIONS
DIMENSIONS (HWD)
REAR PANEL COMPONENTS
• 2” x 17” x 10” (5.1 cm x 43.2 cm x 25.4 cm)
• RU: 1
POWER CONNECTOR
WEIGHT
ETHERNET 10/100 PORT
2-pin (male) green captive-wire connector for 12 VDC power supply
6.95 lbs (3.15 kg)
POWER
RJ-45 Ethernet 10/100 connector. Automatically negotiates connection speed
and whether to use half or full duplex mode
900 mA @ 12 VDC
AxLink CONNECTOR
Metal with black matte finish and translucent polycarbonate faceplate
Black 4-pin (male) captive-wire connector that provides data and power to
external control devices (6 A max power rating)
ONBOARD MASTER
PROGRAM PORT
Processing Power: 32-bit microprocessor, 404 MIPS, Real-time operating system
Memory: Volatile – 64 MB, Non-Volatile – 1 MB, Flash – 256 MB
Networking:
• AxLink – 4-wire network (20.8 kbps) connects up to 255 Axcess devices,
operates up to 3,000 feet of wiring and supplies 12 VDC power
• Ethernet – Direct 10/100 BaseT Ethernet networking
Ethernet Protocols used by NI-3101-SIG
• ICSP – peer to peer protocol used for both master-to-master and
master-to-device communications
• ICMP – To connect over a network, ping a NI-3101-SIG
• Telnet – NetLinx telnet server provides a mechanism to configure and diagnose
a NetLinx system
• HTTP – NI-3101-SIG has a built-in web server that complies with the HTTP 1.0
specification and supports all of the required features of HTTP v1.1
• FTP – NI-3101-SIG has a built-in FTP server that conforms to RFC
• integration! Solutions – uses port 10500 for XML based communication protocol
USB connector that supports USB communications to a PC for system
programming and diagnostics
ENCLOSURE
CONTROL PORTS
• Six Serial data control ports (RS-232/422/485), with XON/XOFF and CTS/RTS,
300-115,200 baud
• Eight IR/Serial ports for control of up to 1.142 MHz carrier frequency
• Eight I/O channels for contact closure, 0-5 VDC voltage sensing, or interactive
power sensing for IR ports
• Eight Relays - single-pole single-throw relay ports, independently controlled
CONFIGURATION DIP SWitch
4-position DIP switch
ID BUTTON
Pushbutton sets device address ID (in conjunction with NetLinx Studio v1.2 build
200 or higher software program)
RS-232/422/485: (PORTS 1-6)
Six RS-232/422/485 control ports using DB-9 (male) connectors with XON/
XOFF (transmit on/transmit off), CTS/ RTS (clear to send/ready to send), and
300-115,200 baud
RELAYS (PORT 8)
• 8-channel single-pole single throw relay ports
• Each relay is independently controlled
• Supports up to 8 independent external relay devices
• Each relay can switch up to 24 VDC or 28 VAC @ 1 A
• Two 8-pin mini-Phoenix connectors (3.5 mm) provide relay termination
DIGITAL I/O (PORT 17)
• 8-channel binary I/O port for contact closure
• Each input is capable of 0-5 VDC voltage sensing. Input format is software
selectable
• One 10-pin mini-Phoenix connector (3.5 mm) provide I/O port termination
IR/SERIAL (PORTS 9-16)
FRONT PANEL COMPONENTS:
LED INDICATORS
• LNK/ACT: Blue LED lights when the Ethernet cables are connected and
terminated correctly and blinks when receiving Ethernet data packets
• Status: Blue LED blinks to indicate that the system is programmed and
communicating properly
• Output: Blue LED blinks when the Master transmits data, sets channels on
and off, sends data strings, etc.
• Input: White LED blinks when the Master receives data from button pushes,
strings, commands, channel levels, etc.
RS-232/422/485 LEDs
• Six sets of blue and white LEDs light to indicate Ports 1-6 are transmitting
or receiving RS-232, 422, or 485 data
• TX LEDs (blue) blink when transmitting data
• RX LEDs (white) blink when receiving data
RELAY LEDs
Eight blue LEDs light to indicate relay channels 1-8 are active (closed) on Port 8
IR/SERIAL LEDs
Eight blue LEDs light to indicate the IR/Serial ports 9-16 are transmitting
control data
• Eight IR/Serial control ports support high-frequency carriers up to 1.142 MHz
• Each output is capable of two electrical formats: IR or Serial
• Eight IR/Serial data signals can be generated simultaneously
• Two 8-pin mini-Phoenix connectors (3.5 mm) provide IR/ Serial port termination
ENVIRONMENTAL
•Operating Temperature: O° C (32° F) to 50° C (122° F)
•Operating Humidity: 20% to 85% RH
•Heat Dissipation (Typical): 36.9 BTU/hr
INCLUDED ACCESSORIES
• Removable rack ears allow for tabletop, under-counter, and front/rear
rack mounting
• Removable feet give a finished look and provide spacing between stacked
components
• Two 8-pin mini-Phoenix female connectors (41-5083)
• One 10-pin mini-Phoenix female connector (41-5107)
• Two CC-NIRC IR Emitters (FG10-000-11)
• One 4-pin 3.5 mm mini-Phoenix AxLink connector (41-5047)
• One 2-pin mini-Phoenix PWR connector (41-5025)
• One Relay Terminal Common Strip (41-2105-01)
• Four Rack mount screws (80-0186)
• Four washers (80-0342)
I/O LEDs
Eight white LEDs light when the I/O channels 1-8 are active on Port 17
370
US S A L ES A ND S U PPORT 8 0 0 . 2 2 2 . 0 1 9 3 • I NTER NATI ONA L S A L ES A ND S U PPORT +1 . 4 6 9 . 6 2 4 . 74 0 0 • www.a m x.c o m
© January 2013 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
c e n t r a l CONTROLLERS
7 | 8 | 8 | 8
S e ri a l
n
Relay
n
IR
n
D ig it a l I/ O
NI-4100
NetLinx Integrated Controller
NI-4100 Controller (FG2105-06)
NI-4100/256 Controller with 256MB RAM
(FG2105-26)
OVERVIEW
The NI-4100 provides versatility with the ability to integrate
the largest number of devices in the NI Series of Master
T RAI NI NG AVAI LABLE
Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s ,
A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ t ra i n i n g
Controllers, including projectors, lighting, DVD and Blu-Ray
players, thermostats and other electronic equipment. In these
technology-driven environments, this solution allows for the
future addition of more devices and control capabilities. With a
perfect mix of compatible formats, the NI-4100 offers flexibility
D-T OOLS C ERT I FI ED P RODUC T
Thi s pro duc t c a n be f o und i n t he D-To o l s m a nuf a c t u r e r p r o d u ct
da t a ba se a nd spe c i f i e d a s a t hi rd pa rt y de v i c e w h e n b u ild in g a n d
pro po si ng a sy st e m usi ng D-To o l s S y st e m I nt e gra t o r s o f t w a r e .
and customization for businesses experiencing rapid growth and
for homes that demand seamless integration of technology and
design. The NI-4100 provides higher performance with a faster
processor, 64MB of onboard RAM and Duet-compatibility.
COMMON APPLICATION
REV I T BI M
Thi s pro duc t i s pa rt o f t he A ut o de sk R e v i t da t a ba s e a n d ca n b e
spe c i f i e d i n de si gns f o r B ui l di ng I nf o rm a t i o n M o d e lin g ( B IM) . D o w n lo a d
t he a sso c i a t e d R e v i t . rf a f i l e f ro m t he A ut o de sk S E E K We b s it e . It is
a l so se a rc ha bl e unde r ‘ A M X’ i n a n y A ut o de sk a pplica t io n .
The NI-4100 is geared to meet the high-end control and
automation requirements of the most sophisticated and complex
commercial and residential installations.
FEATURES
C OUNT RY OF ORI GI N: M EX I C O
To sa t i sf y t he re qui re m e nt s/re gul a t i o ns o f e x i st i ng o r f u t u r e g o ve r n m e n t
pro gra m s, t hi s t w o -l e t t e r c o de i s be i ng pro v i de d t o d e s ig n a t e t h e
c o unt r y o f o ri gi n f o r t hi s pro duc t .
• 7 Configurable RS-232 / RS-422 / RS-485 Serial ports
• 8 Relays
• 8 IR / Serial ports
• 8 Digital I/O ports
• 3 Communication Networks: AxLink, ICSNet and
Ethernet (TCP/IP)
• 4 NetLinx Control Card Expansion slots that support all NXC
control cards
JI T C T ES T ED
Thi s pro duc t ha s be e n t ho ro ughl y t e st e d f o r ne t w o r k s e cu r it y b y t h e
J o i nt I nt e ro pe ra bi l i t y Te st C o m m a nd (J I TC ) di v i si on o f t h e D e f e n s e
I nf o rm a t i o n S y st e m s A ge ncy (DI S A ) unde r De pa rt me n t o f D e f e n s e ( D o D )
Di re c t i v e 8 5 0 0 . 0 1 E, Do D I nst ruc t i o n 8 5 0 0 . 2 a nd D IS A Fie ld S e cu r it y
Ope ra t i o n S e c uri t y Te c hni c a l I m pl e m e nt a t i o n G ui d e s ( S T IG ) . It a ch ie ve d
a pe rf e c t sc o re i n t he J I TC I P Vul ne ra bi l i t y t e st i ng w it h n o H ig h , Me d iu m
o r L o w i m pa c t f i ndi ngs.
• 404 MIPS processor speed
•64 MB RAM or 256 MB RAM
•2 GB CompactFlash (upgradeable to 4 GB)
•1 MB Non-Volatile Memory
•AMX Device Discovery enabled
•JITC Compliant
3000 R E S EARCH D RIVE, RICH ARDSON, TX 75082 • 800.222.0193 • 469.624.7 1 5 3 f a x • TEC H NI C A L S U PPORT 8 0 0 . 9 3 2 . 6 9 9 3
© January 2013 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
371
N I - 4 1 0 0 c e n t r a l CONTROLLERS
A C LO SE R LOOK
I /O LEDs (y el l o w )
RS-232/ 422/ 485 T X /RX LEDs (r ed /y el l o w )
L ink/ Ac tiv e-Status -Output-I n p u t
Rel ay
LEDs (r ed )
I R/S er i al
LEDs (r ed )
Net Li nx C a rd Slots (1-4)
I C S Hu b Ou t
RS-232/ 422/ 485 (Por ts 1-7)
I C S Net (2 )
Ax Li n k LED
(g r een )
Ax Li n k p o r t
I/O ( Por t 17)
PWR
R el a ys (Por t 8)
C a rdFra me DIP s w itc h
Slot 1-4 conne ctor s
372
IR/ Ser i al (Po r ts 9 -1 6 )
DI P s w i tch
P r o g r am p o r t
Eth er n et
US S A L ES A ND S U PPORT 8 0 0 . 2 2 2 . 0 1 9 3 • I NTER NATI ONA L S A L ES A ND S U PPORT +1 . 4 6 9 . 6 2 4 . 74 0 0 • www.a m x.c o m
© January 2013 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
N I - 4 1 0 0 c e n t r a l CONTROLLERS
SPECIFICATIONS
DIMENSIONS (HWD)
rear panel connectors
• 5 3/16” x 17” x 9 5/16” (13.2 cm x 43.2 cm x 23.7 cm)
• RU: 3
• RS-232/422/485 (Ports 1 - 7)
• ICSNet: Two RJ-45 connectors for ICSNet interface (included)
• ICSHub Out: RJ-45 connector provides data to a Hub connected to the
Controller (included)
• Relay (Port 8)
• Digital I/O (Port 17)
• IR/Serial (Ports 9 - 16)
• Program Port
• Configuration DIP Switch: Sets the communication parameters for the
Program port
• ID Pushbutton: Sets the NetLinx ID (Device only) assignment for the device
• Ethernet Port: RJ-45 port for 10/100 Mbps communication. LEDs show
communication activity, connection status, speeds, and mode information:
- SPD (speed) - Yellow LED lights On when the connection speed is 100 Mbps
and turns Off when the speed is 10 Mbps.
- L/A (link/activity) - Green LED lights On when the Ethernet cables are
connected and terminated correctly, and blinks when receiving Ethernet
data packets.
• AxLink LED: Green LED indicates the state of the AxLink port
• AxLink Port: 4-pin 3.5 mm mini-Phoenix (male) connector that provides data
and power to external control devices
• Power Port: 2-pin 3.5 mm mini-Phoenix (male) connector
• CardFrame Number DIP Switch
WEIGHT
9.15 lbs (4.15 kg)
POWER
900 mA @ 12 VDC
enclosure
Metal with black matte finish
memory
•64 MB SDRAM (FG2105-06)
•256 MB RAM (FG2105-26)
•1 MB of Non-volatile SRAM
COMPACT FLASH
2 GB Compact Flash (upgradeable to 4 GB factory programmed)
ONBOARD MASTER
404 MIPS
certifications
FCC Part 15 Class B, CE, and IEC 60950
front panel components
• LINK/ACT: Green LED blinks when the Ethernet cables are connected and
terminated correctly. Also blinks when receiving Ethernet data packets
• Status: Green LED blinks to indicate that the system is programmed and
communicating properly
• Output: Red LED blinks when the Controller transmits data, sets channels, sends data strings, etc.
• Input: Yellow LED blinks when the Controller receives data from button pushes,
strings, commands, channel levels, etc.
• RS-232/422/485 LEDs
• Relay LEDs
• IR/Serial LED
• I/O LEDs
• NetLinx Control Card Slot 1 - 4
• Rack-mount brackets: Provides an installation option for the Integrated
Controller to be mounted into an equipment rack, when used with the
Installation Kit (KA2105-01)
ENVIRONMENTAL
•Operating Temperature: O° C (32° F) to 50° C (122° F)
•Operating Humidity: 20% to 85% RH
•Heat Dissipation (Typical): 36.9 BTU/hr
included accessories
• 2-pin 3.5 mm mini-Phoenix (female) PWR connector (41-5025)
• 4-pin 3.5 mm mini-Phoenix (female) AxLink connector (41-5047)
• 10-pin 3.5 mm mini-Phoenix (female) I/O connector (41-5107)
• Two 8-pin 3.5 mm mini-Phoenix (female) Relay connectors (41-5083)
• Two CC-NIRC IR Emitters
• Two removable rack ears (62-2105-07)
RECOMMENDED ACCESSORIES
DESCRIPTION
PART #
PAGE #
PSN6.5
PSN4.4 NXA-CF2NI
6.5 Amp Power Supply 4.4 Amp Power Supply CompactFlash Upgrade for NI Series Controllers
(FG423-41)
(FG423-45)
(FG21116-xx)
415
414
382
3000 R E S EARCH D RIVE, RICH ARDSON, TX 75082 • 800.222.0193 • 469.624.7 1 5 3 f a x • TEC H NI C A L S U PPORT 8 0 0 . 9 3 2 . 6 9 9 3
© January 2013 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
373
c e n t r a l CONTROLLERS
NXC-ME260/64
enclosure
Metal with black matte finish
NetLinx Master
Ethernet Card
front panel components
is propelled by the high-speed 257 MIPS ColdFire processor.
• Program port: DB9 (male) connector that supports RS-232 communications
to your PC for system programming and diagnostics. Set the port’s
communication speed with the Baud Rate DIP switch. Program ports are
located on the front and rear panels of the Master Card for easy access.
Because these ports share the same circuitry, they should never be used at the
same time; doing so will result in communication and/or programming errors
• Status LED: Green LED blinks to indicate system and communication status
• Output LED: Red LED blinks when the Master Card transmits data, sets
channels on and off, sends data strings, etc.
• Input LED: Yellow LED blinks when the Master Card receives data from button
pushes, strings, commands, channel levels, etc.
• Program Port DIP Switch 8-position DIP switch on the front of the card for
setting the baud rate for the Program port
The standard 32MB CompactFlash memory is expandable to
rear panel
(FG2010-64)
OVERVIEW
The NetLinx NXC-ME260/64 Card supplies optimum control
system performance. With the ability to respond 50 times
faster than conventional control masters, the NXC-ME260/64
1G and beyond and Ethernet networking is built onboard. The
NXC-ME260/64 also features enhanced Username and Password
authentication, HTTPS and SSL certificate interaction, ICSP
communication and encryption, and use of a pre-installed AMX
SSL certificate.
features
• 1 AxLink Bus
• 1 Ethernet (TCP/IP) Port
• 2 ICSNet Ports
• 2 ICSHub Ports
• 257 MIPS processor speed
• 64 MB RAM
• 512 MB CompactFlash (upgradeable to 4 G)
• 1 MB Non-Volatile Memory
SPECIFICATIONS
DIMENSIONS (HWD)
• 1 5/16” x 5” x 8 13/16” (3.4 cm x 12.7 cm x 22.4 cm)
• RU: 1
ENVIRONMENTAL
Heat Dissipation (Typical): 30.7 BTU/hr
WEIGHT
included accessories)
8.8 oz (250 g)
• 2-pin 3.5 mm mini-Phoenix (female) PWR connector (41-5025)
• 4-pin 3.5 mm mini-Phoenix (female) AxLink connector (41-5047)
• 10-pin 3.5 mm mini-Phoenix (female) I/O connector (41-5107)
• Installation Kit (KA2105-01)
• Two 8-pin 3.5 mm mini-Phoenix (female) Relay connectors (41-5083)
• Two CC-NIRC IR Emitters
• Two removable rack ears (62-2105-07)
POWER
750 mA @ 12 VDC
memory
• Compact Flash: 512 MB standard (upgradeable)
• Volatile: 64 MB
• Non-volatile: 1 MB
374
• P WR connector: 2-pin (male) green captive-wire connector for 12 VDC
power supply
• EXPANSION OUT: port RJ-11 connector connects to an AXB-SPE Slave
Port Expander
• Ethernet 10/100 port: The (RJ-45) Ethernet Port default setting automatically
negotiates the connection speed (10 Mbps or 100 Mbps) and whether to use
half duplex or full duplex mode
• Ethernet 10/100 LEDs: Display communication activity, connections, speeds,
and mode information.
• AxLink connector Black 4-pin (male) captive-wire connector that provides
data and power to external control devices. Power rating = 6 A max; actual load
depends on connected power supply
• AxLink Status LED: Green LED blinks to show AxLink and expansion port
data activity
• PROGRAM port: 5-pin (male) gray connector for system programming and
diagnostics. There is a Program port located on the front and rear of the
Master Cards for easy access. Because these ports share the same circuitry,
you should never use both ports at the same time. Doing so will result in
communication and/or programming errors
• ICSNet connectors: Two RJ-45 connectors that provide power (500 mA) and
data to external ICSNet devices
- ICSNet LEDs - Indicate activity on that port.
• ICSHub In/Out connectors: Two RJ-45 connectors that provide data to other
Hubs connected to the Master Card
- ICSHub IN/OUT LEDs - Indicate activity on that port
RECOMMENDED ACCESSORIES
DESCRIPTION
PART #
PAGE #
NXS-MHS
NXA-CFM
PSN6.5
PSN4.4 PSN2.8
Master/Hub Module Shell
CompactFlash Upgrade for NXC-ME260/64 6.5 Amp Power Supply 4.4 Amp Power Supply 13.5 VDC, 2.8 A Power Supply
(FG2009)
(FG2116-xx)
(FG423-41)
(FG423-45)
(FG423-17)
376
382
415
414
414
US S A L ES A ND S U PPORT 8 0 0 . 2 2 2 . 0 1 9 3 • I NTER NATI ONA L S A L ES A ND S U PPORT +1 . 4 6 9 . 6 2 4 . 74 0 0 • www.a m x.c o m
© January 2013 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
c e n t r a l CONTROLLERS
NXB-KNX
SPECIFICATIONS
KNX Communications Gateway
(FG2031-01)
DIMENSIONS (HWD)
•With feet: 1 5/8” x 5 1/2” x 4 1/8” (4.2 cm x 14.1 cm x 10.4 cm)
•Without feet: 1 1/2” x 5 1/2” x 4 1/8” (3.9 cm x 14.1 cm x 10.4 cm)
• RU: 1
WEIGHT
1.45 lbs (0.65 kg)
FRONT PANEL COMPONENTS
and communicate with homes and buildings that utilize the
• Status LED (green): Blinks once a second to indicate that the unit has powered
up. Any state other than blinking once a second indicates the unit is either not
powered, or has not completed boot up
• KNX LED (green): Solid on indicates power is on and the unit is connected to KNX bus
• Output LED (red): Lights to indicate traffic from the NXB-KNX to the KNX bus
• Input LED (yellow): Lights to indicate traffic from the KNX bus to the NXB-KNX
KNX communication protocol. KNX is the world’s first open,
REAR PANEL CONNECTORS
OVERVIEW
Now Enables AMX Control Of KNX Devices
The NetLinx NXB-KNX Communications Gateway allows NetLinx
Integrated Controllers the ability to seamlessly control, integrate
royalty free, and platform independent standard for home and
commercial building control.
COMMON APPLICATION
Ideal for building control, ranging from lighting and shade
control to various security systems, HVAC, water control, energy
management, metering as well as audio and more.
features
• Index filtering tables for portability between systems
• Zero configuration support for immediate system recognition
• KNX 2-pin captive-wire connector
• Ethernet Port - 10/100 Ethernet with PoE. LEDs show communication activity,
connection status, speeds, and mode information:
- SPD (speed) - Yellow LED lights On when the connection speed is 100 Mbps
and turns Off when the speed is 10 Mbps
- L/A (link/activity) - Green LED lights On when the Ethernet cables are
connected and terminated correctly, and blinks when receiving Ethernet
data packets
POWER
• PoE powered - no local Power Supply needed
• IEEE 802.3af Compliant
MEMORY
• Two-Way Control
• 64 MB of RAM
• 256 MB of FLASH
• Extend data-point type allows time, date, etc. to be captured
ENVIRONMENTAL
and used in RMS
• 64 MB RAM / 256 MB FLASH
• Ethernet Interface to AMX control equipment
• Operating Temperature: 32°F to 104°F (0°C to 40°C)
• Relative Humidity: 5% to 85% non-condensing
• Intended for indoor use only
CERTIFICATIONS
FCC Class B, CE, IEC60950, RoHS
INCLUDED ACCESSORIES
A C LO SE R LOOK
D e v ic e Status L ED s
2- p i n ca pt i ve-wi re co nnector for
c on t ro l i nt erfa ce
• Rubber feet
• Green 2-Pin 5mm Phoenix connector with captive screws
PoE Ether ne t Por t fo r
ne tw or k data/ power
RECOMMENDED ACCESSORIES
DESCRIPTION
PART #
PAGE #
PS-POE-AF PoE Injector (FG423-80)
416
3000 R E S EARCH D RIVE, RICH ARDSON, TX 75082 • 800.222.0193 • 469.624.7 1 5 3 f a x • TEC H NI C A L S U PPORT 8 0 0 . 9 3 2 . 6 9 9 3
© January 2013 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
375
c e n t r a l CONTROLLERS
NXS-MHS
Master/Hub Module Shell
(FG2009)
OVERVIEW
The NXS-MHS Master/Hub Module Shell is the enclosure for the
NetLinx Processor ICSNet and ICSHub Cards. The NXS-MHS
A C LOS ER LOOK
accommodates one card and comes complete with faceplates for
the Master and the Hub.
Eth er n et 1 0 /1 0 0 LEDs
Eth er n et 1 0 /1 0 0
C o n n ecto r
I C S Net co n n e c t o rs / L E D s
ICSHub IN/OUT
C o n n e c t o r/ L E D s
NXC-M E260
ETHERNET
10/100
PW R
AXlink
RX
TX
FD
CTS
PW R
AXP
1 2 V DC p o w er
co n n ecto r
• 1 1/2” x 5 9/16” x 8 3/4” (3.8 cm x 14.1 cm x 22.2 cm)
• RU: 1
GN D
12VDC
DIMENSIONS (HWD)
AXM
SPEED
IN
GN D
M aster-Ethernet
RTS
SPECIFICATIONS
PRO GRAM
O UT
ICSNet
ICSHub
P r o g r am Po r t C o n n ect o r
WEIGHT
1.4 lbs (630 g)
Ax Li n k co n n ecto r
Ex p an s i o n Ou t co n n ecto r
Ax Li n k s tatu s LED (g r een )
enclosure
Metal with black matte finish
RECOMMENDED ACCESSORIES
DESCRIPTION
PART #
NXC-NH
ICSNet Hub Card (FG2060)
NXS-NMS
PAGE #
SPECIFICATIONS
NetModule Shell
DIMENSIONS (HWD)
• 1 1/2” x 5 9/16” x 9 1/4” (3.8 cm x 14.1 cm x 23.5 cm)
• RU: 1
(FG2009-10)
WEIGHT
2.15 lbs (980 g)
OVERVIEW
With the NXS-NMS NetModule Shell, one NetLinx Control Card
can be installed, providing connectivity to the NetLinx bus via
power
+12 VDC
ICSNet connections. The NXS-NMS is a simple, economical option
for integrating additional functionality into control systems, and it
QUI C K T I P
The I D button on the rear panel c an be pr og ram me d w i t h t h e
NetL i nx S tudi o s oftware to as s i gn new Dev i c e an d S yst e m
num ber s for the m odul e.
provides an enclosure for installing NetLinx (NXC) Control Cards.
features
• Control connector: 20-pin black (male) connector that connects
the NetModule Shell to external devices. These connectors are
C o n tr o l C ar d con n e c t o r ( 2 0 - p in )
A C LOS ER LOOK
keyed to ensure proper installation
NetLinx Master/Hub ICSNet Port. An ICSNet port on a NetLinx
Master or Hub supplies up to 500 mA at 12 V for module power
I C S Net RJ-4 5 c o n n e c t o rs
Pa ra lle l 1 2 V D C
2 - p in p o we r
s u p p ly c o n n e c t o rs
• ICSNet RJ-45 connectors: Receives power and data from a
S
• 12 VDC power supply connectors: Two male 2-pin (green)
connectors for 12 VDC power
I D Bu tto n
376
US S A L ES A ND S U PPORT 8 0 0 . 2 2 2 . 0 1 9 3 • I NTER NATI ONA L S A L ES A ND S U PPORT +1 . 4 6 9 . 6 2 4 . 74 0 0 • www.a m x.c o m
© January 2013 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
c e n t r a l CONTROLLERS
AXB-232++
RS-232/422/485 Interface
(FG5761-10)
OVERVIEW
SPECIFICATIONS
While this controller can serve as a conventional RS-232/422
DIMENSIONS (HWD)
control port, it is also able to run its own Axcess application
program – an exclusive AMX product feature. Source specific
programming, such as video switchers, laserdisc players and video
codecs, can be handled by the AXB-232++ to deliver a modular
solution for system programming.
1 1/2” x 5 9/16” x 5 7/16” (38 mm x 140 mm x 140 mm)
WEIGHT
1.1 lbs (499 g)
ENCLOSURE
Metal with black matte finish
CONTROL PORT
RS-232/422/485 port (300-115,200 baud), XON/XOFF, CTS/RTS
BUFFERS
1,000 byte serial input buffer; 1,000 byte AxLink buffer
INDICATORS
Three status LEDs indicate transmit, receive, and AxLink
RECOMMENDED ACCESSORIES
DESCRIPTION
PART #
PAGE #
AC-RK
CC-232
Accessory Rack Kit
Serial Communication Cable
(FG515)
(FG10-752-04)
410
420
AXB-DMX512
DMX512 Interface
(FG5927)
OVERVIEW
SPECIFICATIONS
The AXB-DMX512 creates a bi-directional DMX512-to-AxLink
DIMENSIONS (HWD)
connection, transmitting and receiving up to 512 DMX channels.
Onboard processing and memory create as many as 96 channel
groups, eight faders, and 72 presets (284 by adding extended
memory), as well as soft-patch channels. A DMX lighting board
1 1/2” x 5 9/16” x 5 7/16” (38.4 mm x 141 mm x 138.4 mm)
WEIGHT
1.1 lbs (499 g)
ENCLOSURE
Metal with black matte finish
can operate in tandem with the AXB-DMX512, generate levels for
CONTROL PORT
storing presets, or bypass the AXB-DMX512 for direct control of
DMX512 transmit and receive
channels.
INCLUDES
Front-panel setup switches and status LEDs
RECOMMENDED ACCESSORIES
DESCRIPTION
PART #
PAGE #
AC-RK
Accessory Rack Kit
(FG515)
410
3000 R E S EARCH D RIVE, RICH ARDSON, TX 75082 • 800.222.0193 • 469.624.7 1 5 3 f a x • TEC H NI C A L S U PPORT 8 0 0 . 9 3 2 . 6 9 9 3
© January 2013 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
377
c e n t r a l CONTROLLERS
AXB-IRS4
IR/Serial Interface, 4 Ports
(FG5914)
OVERVIEW
The AXB-IRS4 operates as an AxLink bus device or as an
independent RS-232-to-IR interface. The four IR ports can be
set up for IR or wired serial operation. Any two ports can send
commands at the same time; internal firmware stacks any
remaining IR pulses and executes them in sequence. Each unit
emulates four AxLink devices.
SPECIFICATIONS
DIMENSIONS (HWD) 1 1/2” x 5 1/2” x 5 1/2” (38 mm x 140 mm x 140 mm)
WEIGHT 1.1 lbs (499 g)
ENCLOSURE Metal with black matte finish
CONTROL PORT
• Four IR/serial ports
• One AxLink or one RS-232 port (300–19,200 baud) to receive external control
commands
INCLUDES
• Battery-backed IR memory, up to 200 commands per port
• Front-panel setup switches and status LEDs
• Two CC-IRC or CC-SER emitters
RECOMMENDED ACCESSORIES
DESCRIPTION
PART #
PAGE #
AC-RK
CC-232
Accessory Rack Kit
Serial Communication Cable
(FG515)
(FG10-752-04)
410
420
AXB-MIDI
MIDI Interface
(FG5913)
OVERVIEW
SPECIFICATIONS
The versatile AXB-MIDI can receive data from two independent
DIMENSIONS (HWD)
MIDI IN (A, B) ports to provide automated control of audio
mixers, routers and other MIDI-compatible devices. MIDI “IN A”
and “IN B” are combined with “THRU” and “OUT,” which can
be re-patched under software control. System-generated MIDI
commands are sent to “OUT.”
1 1/2” x 5 9/16” x 5 7/16” (38.4 mm x 141 mm x 138.4 mm
WEIGHT
1 lb (454 g)
ENCLOSURE
Metal with black matte finish
CONTROL PORT
• MIDI IN A, MIDI IN B, MIDI OUT, MIDI THRU INCLUDES
• Five LEDs for AxLink, MIDI A IN, B IN, OUT, and THRU
• Front-panel setup switches and status LEDs
POWER
12V DC, 100 mA
378
RECOMMENDED ACCESSORIES
DESCRIPTION
PART #
PAGE #
AC-RK
Accessory Rack Kit
(FG515)
410
US S A L ES A ND S U PPORT 8 0 0 . 2 2 2 . 0 1 9 3 • I NTER NATI ONA L S A L ES A ND S U PPORT +1 . 4 6 9 . 6 2 4 . 74 0 0 • www.a m x.c o m
© January 2013 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
c e n t r a l CONTROLLERS
AXB-VOL3
3-Channel Volume Controller
(FG5756)
OVERVIEW
SPECIFICATIONS
The AXB-VOL3 controls three audio volume channels. Each
DIMENSIONS (HWD)
line-level channel, opto-isolated from system ground, can be
configured for balanced or unbalanced line operation. It is
programmable for 128 steps of audio level, audio mute, variable
ramp speed and level presets.
1 1/2” x 5 7/16” x 5 7/16” (38.4 mm x 141 mm x 138.4 mm)
WEIGHT
1.1 lbs (499 g)
ENCLOSURE
Metal with black matte finish
AUDIO PORTS
• Three independent line-level audio in and out ports, balanced or unbalanced
• THD of less than 0.008%, -72 dB at full attenuation (mute)
INCLUDES
• Front-panel setup switches and status LEDs
• Resistors for 600 ohm termination
RECOMMENDED ACCESSORIES
DESCRIPTION
PART #
PAGE #
AC-RK
Accessory Rack Kit
(FG515)
410
AXB-REL8
Relay Controller
(FG5774)
OVERVIEW
SPECIFICATIONS
The AXB-REL8 controls closure-activated devices, acting as an
DIMENSIONS (HWD)
eight-channel relay control port on the AxLink bus.
1 1/2” x 5 1/2” x 5 1/2” (38 mm x 140 mm x 140 mm)
WEIGHT
1.1 lbs (499 g)
ENCLOSURE
Metal with black matte finish
CONTROL PORT
Eight relays, normally open, rated at 750 mA, 28 VAC/24 VDC
INCLUDES
• Front-panel device addressing switches and status LEDs
• Metal tab strips for communing adjacent relays
RECOMMENDED ACCESSORIES
DESCRIPTION
PART #
PAGE #
AC-RK
Accessory Rack Kit
(FG515)
410
3000 R E S EARCH D RIVE, RICH ARDSON, TX 75082 • 800.222.0193 • 469.624.7 1 5 3 f a x • TEC H NI C A L S U PPORT 8 0 0 . 9 3 2 . 6 9 9 3
© January 2013 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
379
c e n t r a l CONTROLLERS
AC-SMB
Surface Mounting Bracket
(FG525)
OVERVIEW
These L-shaped brackets can be oriented to align flush with either
with NI-700/900 controllers, MAX-CSE, MAX-CSD10, NXA-AVB,
the top or bottom surface and allow users to mount devices to
NXA-AVB/ETHERNET, and IS-SPX-1000.
almost any flat surface; floor, ceiling, wall, table or wherever is
convenient for an installation. AC-SMB brackets can be used
AC-RK
Accessory Rack Kit
(FG515)
OVERVIEW
SPECIFICATIONS
The Accessory Rack Kit holds up to three NetLinx modules and
DIMENSIONS (HWD)
measures only one rack unit in height.
• 1 3/4” x 19” x 1/2” (4.4 cm x 48.3 cm x 1.3 cm)
• RU: 1
T R A INING AVAILAB LE
For im por tant ins talla t i o n, co n fi gura ti o n a n d p ro g ra mmi n g te ch ni que s,
AMX Univer s ity tr aining i s a va i l a b l e . Ju st vi si t ww w.a mx.c om/tra ining
D-T OO LS C E RT IFIE D P ROD UCT
This pr oduc t c an be fo u nd i n th e D-To o l s ma nufa cture r p ro d uct
da tabas e and s pec ifie d a s a thi rd p a rty de vi ce wh e n b ui l di ng a n d
pr opos ing a s y s tem usi ng D-To o l s Syste m I n te gra to r so ftwa re .
380
US S A L ES A ND S U PPORT 8 0 0 . 2 2 2 . 0 1 9 3 • I NTER NATI ONA L S A L ES A ND S U PPORT +1 . 4 6 9 . 6 2 4 . 74 0 0 • www.a m x.c o m
© January 2013 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
c e n t r a l CONTROLLERS
NXP-CPI16
NetLinx Custom Panel Interface
®
(FG2410)
OVERVIEW
SPECIFICATIONS
The NetLinx Custom Panel Interface provides a direct ICSNet
DIMENSIONS (HWD)
connection to custom control panels. It’s pin-for-pin compatible
2 3/4” x 1 7/8” x 1 3/8” (7.0 cm x 4.7 cm x 3.6 cm)
with devices that were designed for use with the AXP-CPI16 card
WEIGHT
(designed for integration with an Axcess Control System). Two 20pin headers provide ribbon cable wiring or direct-connect insertion to circuit boards, providing inputs for up to 16 closures and
16 feedback outputs for LEDs. Under software control, the LED
outputs can act as drivers to 8-segment bargraphs or as discrete
outputs for feedback. In addition, the NXC-CPI16 also includes
two quadrature inputs for mechanical or optical rotary encoders,
used to control variable levels such as volume and lights, or lens
focus and zoom.
• Device: 8.10 oz (229.6 g)
• Total Shipping: 1 lb (453.6 g)
POWER
12 VDC; maximum draw of 300 mA
INPUT CONNECTORS
• Indicator power: Two-pin 3.5 mm captive wire
• I/O Headers: Two 20-pin headers, 8 I/O channels each (16 closure inputs
activated with GND or TTL Low (< 0.8 V)). Open collector outputs (0-28 VDC).
Inputs are sampled approximately every 10 msec
• Rotary Encoder inputs: 2 Quadrature inputs on a 2 x 3 header (6-pin), two
encoder inputs (4-pin) with a +5 V supply pin (supplying up to 100 mA) and
a GND pin
COMMON APPLICATION
ICSNET
The NXP-CPI16 is a versatile, useful device for both custom panel
• Two RJ-45 connectors for ICSNet connection ID BUTTON
• Generates an event from the CPI16 to allow you to assign new device numbers
using the ID mode in NetLinx Studio
and contact-closure applications.
FEATURES
•Integrates custom panels with 16 closure inputs and 16 LED
outputs; pin-for-pin compatible with panels designed for
LED
ICSP status indicator (green)
OPEN COLLECTOR OUTPUTS
•Operates as a low-cost closure interface
• 16-open collector outputs, acting as a switch to ground, up to 100 mA.
• Outputs can be connected to voltages ranging between 0 and + 28 V.
• Each output is updated every 10 msec
•Acts as a driver for up to two 8-segment LED bargraphs; each
INCLUDED ACCESSORIES
AXP-CPI16
bargraph uses eight of the 16 LED outputs
•Allows precise digital control of up to two levels from
quadrature inputs
• 6-pin header with 3 feet (0.914) of ribbon cable
• Two mating 20-pin headers, each with 3 feet of ribbon cable attached
• One green 2-pin 3.5 mm pitch captive wire connector for external
indicator power
•Accepts mechanical or optical rotary encoders
•Offers programmable level response, provides software-driven
performance adjustment and switchable coarse/fine level control
3000 R E S EARCH D RIVE, RICH ARDSON, TX 75082 • 800.222.0193 • 469.624.7 1 5 3 f a x • TEC H NI C A L S U PPORT 8 0 0 . 9 3 2 . 6 9 9 3
© January 2013 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
381
c e n t r a l CONTROLLERS
NXA-CF2NI
CompactFlash Upgrade for
NI-X100 Series Controllers
NXA-CF2NI4G
4 GB CompactFlash Upgrade (FG2116-07)
OVERVIEW
The NXA-CF2NI is the perfect solution when more FLASH storage
memory is needed in your NI-2100, NI-3100, or NI-4100 NetLinx
controller.
NXA-CFM
CompactFlash Upgrade for
NXC-ME260/64
NXA-CFM4G
4 GB CompactFlash Upgrade
(FG2116-06)
OVERVIEW
The NXA-CFM is the perfect solution when more FLASH storage
memory is needed in your NXC-ME260/64 NetLinx controller.
382
US S A L ES A ND S U PPORT 8 0 0 . 2 2 2 . 0 1 9 3 • I NTER NATI ONA L S A L ES A ND S U PPORT +1 . 4 6 9 . 6 2 4 . 74 0 0 • www.a m x.c o m
© January 2013 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
c e n t r a l CONTROLLERS
NXA-ICSNET
NetLinx ICSNet Communication
Network Card
(FG2105-10)
OVERVIEW
SPECIFICATIONS
The optional ICSNet communication network card from AMX
DIMENSIONS (HWD)
provides the NI-2100 and NI-3100 NetLinx Integrated Controllers
2 3/8” x 2 3/8” x 1 3/8” (6.1 cm x 6.1 cm x 3.6 cm)
optional ICSNet communication network capability.
WEIGHT
1.2 oz (34.02 g)
features
• Easily installed and adds ICSNet capability instantly
• Comes standard and pre-installed with the NetLinx NI-2100/ICS,
NI-3100/ICS and NI-4100 Integrated Controllers
• Handles wiring runs of up to 1,000 feet for each ICSNet run
• Employs industry-standard Cat-5 wiring and connections
D-T OO LS C E RT IFIE D P ROD UCT
This pr oduc t c an be fo u nd i n th e D-To o l s ma nufa cture r p ro d uct
da tabas e and s pec ifie d a s a thi rd p a rty de vi ce wh e n b ui l di ng a n d
pr opos ing a s y s tem usi ng D-To o l s Syste m I n te gra to r so ftwa re .
C O U NT RY OF O R IG IN: MEXICO
To s a tis fy the r equir eme nts/re g ul a ti o ns o f e xi sti ng o r fu ture g o ve rn m e nt
pr ogr am s , this two- let te r co d e i s b e i ng p ro vi d e d to de si g na te th e
c ountr y of or igin for thi s pro d uct.
3000 R E S EARCH D RIVE, RICH ARDSON, TX 75082 • 800.222.0193 • 469.624.7 1 5 3 f a x • TEC H NI C A L S U PPORT 8 0 0 . 9 3 2 . 6 9 9 3
© January 2013 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
383