IP Link® Device Interface
Communication Sheet
shrp_3_4025_4.pke
Revision: 12/1/2011
This document provides additional assistance with wiring your Extron IP Link enabled product to your device.
Different components may require a different wiring scheme than those listed below.
For complete operating instructions, refer to the user's manual for the specific Extron IP Link enabled product or
the controlled device manufacturer supplied documentation.
Device Specifications:
Device Type:
Manufacturer:
Firmware Version:
Model(s):
DVD
Sharp
N/A
BD-HP52U, BD-HP70, BD-HP70U, BD-HP75U
Version History:
Driver
Version
Date
IP Link
Compiler
GC
Version
4
12/1/2011
1.4.0
3.2.0
Added model BD-HP75U.
3
12/1/2010
1.4.0
3.0.4
Added model BD-HP70.
2
11/17/2010
1.4.0
3.0.4
Added model BD-HP70U.
1
01/28/2010
1.4.0
3.0.2
Initial version.
Notes
Driver Notes:
Page 1 of 3
IP Link® Device Interface
Communication Sheet
shrp_3_4025_4.pke
Revision: 12/1/2011
Control Commands & States:
Menu Call
Top Menu
Pop-Up Menu
Setup
Up
Down
Left
Right
Enter
Return
Function
Menu Navigation
Exit
Power Control
On
Off
Transport
Play
Pause
Stop
FFwd
Rew
Next
Previous
Repeat
Open/Close
Pop-Up Menu
Setup
Up
Down
Left
Right
Enter
Return
Status Available:
N/A
MLC62 Supported Commands:
Menu Call
Top Menu
Function
Menu Navigation
Exit
Power Control
On
Off
Transport
Play
Pause
Stop
FFwd
Rew
Next
Previous
Repeat
Open/Close
Page 2 of 3
shrp_3_4025_4.pke
IP Link® Device Interface
Communication Sheet
Revision: 12/1/2011
Cable and Adapter Requirements:
F/F RS-232 Null Modem Serial Cable
Notes for the Device:
Serial communication:
Port Type: RS-232
Baud Rate: 9600
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control: None
Pin Assignments Diagram:
Note: Captive screw connector may also be used as a serial connection.
General Notes:
Page 3 of 3