Veriton 5200 series
(Veriton 5200/Veriton 5200D)
User’s guide
Copyright © 2001 Acer Incorporated
All Rights Reserved.
Veriton 5200 series
(Veriton 5200/Veriton 5200D)
User’s guide
Changes may be made periodically to the information in this publication without obligation
to notify any person of such revision or changes. Such changes will be incorporated in new
editions of this manual or supplementary documents and publications. This company makes
no representations or warranties, either expressed or implied, with respect to the contents
hereof and specifically disclaims the implied warranties of merchantability or fitness for a
particular purpose.
Record the model number, serial number, purchase date, and place of purchase information in
the space provided below. The serial number and model number are recorded on the label
affixed to your computer. All correspondence concerning your unit should include the serial
number, model number, and purchase information.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in
any form or by any means, electronic, mechanical, photocopy, recording, or otherwise,
without the prior written permission of Acer Incorporated.
Model Number : _________________________________
Serial Number: ___________________________________
Purchase Date: ___________________________________
Place of Purchase: ________________________________
Acer and the Acer Logo are registered trademarks of Acer Inc. Other company’s product
names or trademarks are used herein for identification purposes only and belong to their
respective companies.
iii
Notices
FCC notice
This device has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This device generates, uses, and can radiate radio frequency
energy, and if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or television
reception, which can be determined by turning the device off and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the device and receiver
•
Connect the device into an outlet on a circuit different from that to which
the receiver is connected
•
Consult the dealer or an experienced radio/television technician for help
Notice: Shield cables
All connections to other computing devices must be made using shielded cables
to maintain compliance with FCC regulations.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certified to
comply with the Class B limits may be attached to this equipment. Operation
with noncertified peripherals is likely to result in interference to radio and TV
reception.
Caution! Changes or modifications not expressly approved by the
manufacturer could void the user’s authority, which is granted by
the Federal Communications Commission, to operate this
computer.
Use conditions
This part complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
iv
Notice: Canadian users
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Important safety instructions
Read these instructions carefully. Save these instructions for future reference.
1
Follow all warnings and instructions marked on the product.
2
Unplug this product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
3
Do not use this product near water.
4
Do not place this product on an unstable cart, stand, or table. The product
may fall, causing serious damage to the product.
5
Slots and openings in the cabinet and the back or bottom are provided for
ventilation; to ensure reliable operation of the product and to protect it
from overheating, these openings must not be blocked or covere. The
openings should never be blocked by placing the product on a bed, sofa,
rug, or other similar surface. This product should never be placed near or
over a radiator or heat register, or in a built-in installation unless proper
ventilation is provided.
6
This product should be operated from the type of power indicated on the
marking label. If you are not sure of the type of power available, consult
your dealer or local power company.
7
Do not allow anything to rest on the power cord. Do not locate this
product where persons will walk on the cord.
8
If an extension cord is used with this product, make sure that the total
ampere rating of the equipment plugged into the extension cord does not
exceed the extension cord ampere rating. Also, make sure that the total
rating of all products plugged into the wall outlet does not exceed the fuse
rating.
9
Never push objects of any kind into this product through cabinet slots as
they may touch dangerous voltage points or short out parts that could
result in a fire or electric shock. Never spill liquid of any kind on the
product.
10
Do not attempt to service this product yourself, as opening or removing
covers may expose you to dangerous voltage points or other risks. Refer all
servicing to qualified service personnel.
11
Unplug this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
a
When the power cord or plug is damaged or frayed
b
If liquid has been spilled into the product
v
c
If the product has been exposed to rain or water
d
If the product does not operate normally when the operating
instructions are followed. Adjust only those controls that are covered
by the operating instructions since improper adjustment of other
controls may result in damage and will often require extensive work
by a qualified technician to restore the product to normal condition.
e
If the product has been dropped or the cabinet has been damaged
f
If the product exhibits a distinct change in performance, indicating a
need for service.
12
Replace the battery with the same type as the product’s battery we
recommend. Use of another battery may present a risk of fire or explosion.
Refer battery replacement to a qualified serviceman.
13
Warning! Batteries may explode if not handled properly. Do not
disassemble or dispose of them in fire. Keep them away from children and
dispose of used batteries promptly.
14
Use only the proper type of power supply cord set (provided in your
accessories box) for this unit. It should be a detachable type: UL listed/CSA
certified, type SPT-2, rated 7A 125V minimum, VDE approved or its
equivalent. Maximum length is 15 feet (4.6 meters).
Year 2000 compliance statement
The Veriton 5200 series computer carries the "Hardware NSTL Tested Year 2000
Compliant" logo, which certifies that this model has been tested by NSTL using
the YMark2000 test, and has been found to meet NSTL’s standards for Year
2000 hardware compliance.
For more details, check the Acer Year 2000 Resource Center at http://
global.acer.com/service/pcy2000.html
vi
Laser compliance statement
The CD-ROM/DVD-ROM/CD-RW drive in this computer is a laser product. The
CD-ROM/DVD-ROM/CD-RW drive’s classification label (shown below) is located
on the drive.
CLASS 1 LASER PRODUCT
CAUTION: INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO
BEAM.
Lithium battery statement
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the manufacturer. Discard used
batteries according to the manufacturer’s instructions.
iii
iii
iv
v
vi
vi
1 First things first
1
Package contents
Before you start...
Important tips
Cleaning and servicing
Asking for technical assistance
Accessing your online guide
3
4
4
4
5
5
2 System tour
7
Features
Performance
Multimedia
Connectivity
Front panel
Rear panel
The keyboard
The mouse
Disk drives
Hard disk
3.5-inch floppy drive
CD-ROM/DVD-ROM/CD-RW drive
9
9
9
10
11
13
15
18
19
19
19
20
3 Setting up your computer
23
Arranging a comfortable work area
Adjusting your chair
Positioning your computer
Positioning your monitor
Positioning your keyboard
Positioning your mouse
Connecting peripherals
Connecting your keyboard
Connecting your mouse
Connecting a CRT monitor
Connecting the power cable
25
25
25
26
26
26
27
27
29
32
33
Contents
Notices
FCC notice
Important safety instructions
Year 2000 compliance statement
Laser compliance statement
Lithium battery statement
viii
Turning on your computer
Turning off your computer
Connecting options
Connecting your printer
Connecting to the network
Connecting USB devices
Connecting multimedia devices
4 Upgrading your computer
Installation precautions
ESD precautions
Preinstallation instructions
Post-installation instructions
Opening your computer
To remove the computer cover
To replace the computer cover
Internal components
System boards
Mainboard layout
Audio board
Upgrading your computer
Upgrading the memory
Replacing the hard disk
Installing an expansion card
5 System utilities
System utilities
Acrobat Reader
LANDesk Client Manager (optional)
Norton AntiVirus
NTI CD-Maker (for models with CD-RW)
PowerDVD (for models with DVD)
BIOS Setup utility
Reinstalling programs
6 Frequently asked questions
FAQs
34
36
37
37
38
39
41
45
47
47
47
48
49
49
50
51
52
52
57
58
58
61
63
67
69
69
69
70
70
71
71
72
73
75
1 First things first
This chapter describes the contents of your
computer package and also provides
important tips on how to take care of your
computer.
3
Package contents
Before you unpack your computer, make sure that you have enough
space to set up your computer.
Carefully unpack the carton and remove the contents. If any of the
following items are missing or damaged, contact your dealer
immediately:
•
Veriton 5200 series computer
•
Items contained in the accessory box
•
PS/2 or USB keyboard
•
PS/2 or USB mouse
•
User’s guide and installation poster
•
Other user documentation and third-party software
4
1 First things first
Before you start...
Please read the safety instructions listed in this section. Following
these instructions on the care and use of your new computer will help
you maximize its durability.
Important tips
•
Do not expose the computer to direct sunlight. Do not place it
near sources of heat, such as a radiator.
•
Do not subject the computer to magnetic fields.
•
Do not expose the computer to rain or moisture.
•
Do not spill water on the computer.
•
Do not subject the computer to heavy shock or vibration.
•
Do not expose the computer to dust and dirt.
•
Never place the system on uneven surfaces.
•
Do not step on the power cord or place heavy objects on top of it.
Carefully route the power cord and any cables away from personal
traffic.
•
When unplugging the power cord, do not pull on the cord itself
but pull on the plug.
•
The total ampere rating of the equipment plugged in should not
exceed the ampere rating of the cord if you are using an extension
cord. Also, the total current rating of all equipment plugged into
a single wall outlet should not exceed the fuse rating.
•
Check the documentation that came with your software programs
to see if you can select other combinations of resolution and color.
These adjustments could make viewing the screen more
comfortable.
Cleaning and servicing
To clean your computer and keyboard
1
Turn off the computer and unplug the power cable.
2
Use a soft cloth moistened with water and gently wipe the exterior
of the computer and the keyboard. Do not use liquid or aerosol
cleaners.
5
To clean your mouse
1
Open the circular cover underneath the mouse.
2
Take out the rubber ball and wipe it with a soft, damp cloth.
3
Put the ball back and close the cover.
When to contact a service technician
•
If you dropped and damaged the computer
•
If liquid has been spilled into the computer
•
If the computer is not operating normally
•
If a computer problem persists even after you have checked and
done the troubleshooting tips discussed in the “Frequently asked
questions” section on page 75
•
If your problem is not listed in the “Frequently asked questions”
section on page 75
•
If you want to replace or upgrade any of your computer's internal
components
Asking for technical assistance
For technical assistance, contact your local dealer or distributor. You
may also access the Acer Web site at http://www.acer.com/ for
information on how and where to contact the service centers available
in your area.
Accessing your online guide
For on-the-go help information about your computer, refer to the
Veriton 5200 series Online guide. To access the online guide, simply
double-click on the Veriton 5200 series Online icon on your Windows
desktop.
6
1 First things first
2 System tour
This chapter discusses the features and
components of your computer.
9
Features
Here are just a few of your computer’s many features:
Performance
•
Intel Pentium® 4 processor with Intel NetBurst™
micro-architecture
•
System memory expandable to a maximum of:
•
Veriton 5200: Maximum of 3 GB using SDRAM (Synchronous
Dynamic Random Access Memory) DIMMs
•
Veriton 5200D: Maximum of 2 GB using DDR (Double Data
Rate)-SDRAM DIMMs
Note: To capitalize on the system memory capacity mentioned
above, you must use 1-GB capacity DIMMs. As of the moment,
such DIMM type is not available in the market. The biggest
capacity DIMM type available is 512-MB which qualifies the system
memory capacity of Veriton 5200 to 1.5 GB and 1.0 GB for Veriton
5200D.
•
Power management function
•
3.5-inch floppy drive
•
Optical drive (CD-ROM, DVD-ROM or CD-RW drive)
•
High-capacity, Enhanced-IDE hard disk
Multimedia
•
128-bit graphics accelerator installed in the AGP Pro card slot
•
3-D quality audio system via onboard audio controller
•
Audio-in/Line-in, Audio-out/Line-out, Headphone-out, Mic-in, and
Game/MIDI interfaces
Note: The system has two microphone-in ports (front and rear).
However, you can not use both of them at the same time. The
default setting for your system enables the microphone-in port in
front and disables the one at the back.
10
2 System tour
Connectivity
•
PS/2 mouse and keyboard interfaces
•
Two serial and one parallel interfaces
•
Universal Serial Bus (USB) ports (two on the front and two on the
rear panel)
•
High-speed fax/data PCI modem (optional)
•
10Base-T/100Base-TX network support with remote wake-up
function
11
Front panel
Your computer’s front panel consists of the following:
Label
Icon
Description
1
USB ports
2
Front microphone-in port (see Note)
3
Headphone/Earphone port
4
Hard disk activity indicator
5
System activity indicator
6
Power indicator
12
Label
2 System tour
Icon
Description
7
Power button
8
CD-ROM/DVD-ROM/CD-RW Headphone/
Earphone port
9
Volume control
10
CD-ROM/DVD-ROM/CD-RW drive indicator
11
CD-ROM/DVD-ROM/CD-RW drive
12
CD-ROM/DVD-ROM/CD-RW drive
Skip/Forward button
13
CD-ROM/DVD-ROM/CD-RW drive
Stop/Eject button
14
3.5-inch floppy drive Eject button
15
3.5-inch floppy drive
16
3.5-inch floppy drive indicator
17
5.25-inch drive bay
Note: The system has two microphone-in ports (front and rear).
However, you can not use both of them at the same time. The
default setting for your system enables the front microphone-in
port and disables the one at the back. Refer to the Veriton 5200
series Online guide for instructions on how to enable the rear
microphone-in port.
13
Rear panel
Your computer’s rear panel consists of the following:
Label
Icon
Color
Description
1
Power supply
2
Main power switch
3
Power cable socket
4
Voltage selector switch
5
Green
PS/2 mouse port
6
Purple
PS/2 keyboard port
7
Black
USB ports
14
Label
2 System tour
Icon
Color
Description
8
White
Network port
9
Teal or
Turquoise
Serial port 1
10
Teal or
Turquoise
Serial port 2
11
Burgundy
Parallel/Printer port
12
Gold
Game/MIDI port
13
Lime
Audio-out/Line-out jack
14
Light
blue
Audio-in/Line-in jack
15
Rear microphone-in port
16
Expansion slots
17
CRT/LCD monitor port
For information on how to connect the peripherals, see “Connecting
peripherals” on page 27 and “Connecting options” on page 37.
15
The keyboard
Your computer comes with a USB keyboard. The keyboard has fullsized keys that include separate cursor keys, two Windows keys, and
twelve function keys.
For information on how to connect your USB keyboard, please see
“Connecting peripherals” on page 27.
No.
Component
Function
1
Function keys
Access most of the computer’s controls like
screen brightness, volume output and the
BIOS Setup utility.
(F1 - F12)
2
Caps Lock
When activated, all alphabetic characters
typed appear in uppercase (same function
as pressing Shift + <letter>).
16
2 System tour
No.
Component
Function
3
Windows logo key
Start button. Combinations with this key
perform special functions, such as:
•
Windows + Tab: Activate the next
Taskbar button
•
Windows + E: Explore My Computer
•
Windows + F: Find Document
•
Windows + M: Minimize All
•
Shift + Windows + M: Undo
Minimize All
•
Windows + R: Displays the Run
dialog box
4
Application key
Opens the applications context menu
(same function as clicking the right button
of the mouse).
5
Cursor keys
Also called the arrow keys. These keys let
you move the cursor around the screen.
They serve the same function as the arrow
keys on the numeric pad when the Num
Lock is toggled off.
6
Palm rest
(detachable)
Provides a comfortable place to rest your
hands while typing.
7
Num Lock
When activated, the keypad is set to
numeric mode, i.e., the keys function as a
calculator (complete with arithmetic
operators such as +, -, x, and /).
8
Scroll Lock
When activated, the screen moves one line
up or down when you press the up arrow
or down arrow respectively. Take note that
Scroll Lock may not work with some
applications.
9
Volume control/
Mute knob
The volume control/mute knob controls
the speaker volume. Turn it clockwise or
counterclockwise to adjust the volume.
Press it to toggle between mute and
sound.
17
No.
Component
Function
10
Multimedia keys
Allow you to do the following:
11
12
Internet/Suspend
keys
Programmable
keys
•
Play/Pause button
- press to
start playing the audio or video file.
Press again to pause.
•
Stop button - press to stop
playing the audio or video file.
•
Forward button
- press to skip
forward to the next file and start
playing.
•
Backward button
- press to skip
backward to the previous file and
start playing.
Consist of three buttons:
•
Email button
launches your
email application.
•
Web browser button
launches your current default
browser.
•
Suspend button
puts the
system to sleep when pressed.
Access a URL (Web site) or launch any
program, file or application in your system.
The fifth key is set to launch the Windows
Media Player.
To configure the settings of each key, rightclick on the Magic Keyboard icon located
on your Windows desktop.
18
2 System tour
The mouse
Your computer comes with a USB mouse. The mouse has one ratchet
wheel and two buttons: a right button and a left button. Quickly
pressing and releasing the buttons is called clicking. Sometimes, you
will need to do a double-click (clicking the same button twice quickly)
or a right-click (clicking the right button quickly).
For information on how to connect your USB mouse, see “Connecting
peripherals” on page 27.
No.
Component
Function
1
Left button
Allows you to select with a click and execute with a double-click.
2
Ratchet wheel
Allows you to easily scroll. By moving the
wheel with your index finger, you can
quickly move through multiple pages,
lines or windows. Also functions as a
third button allowing you to quickly click
or double-click an icon or a selected item.
3
Right button
Opens the applications context menu.
For information on how to clean your mouse, see “To clean your
mouse” on page 5.
Note: If you are left-handed, refer to your Windows manual for
instructions on how to set up your mouse for left-handed use.
19
Disk drives
Your Veriton 5200 series computer comes with the following disk
drives:
Hard disk
Your computer is preinstalled with a high-capacity Enhanced-IDE
(E-IDE) hard disk.
Refer to “Replacing the hard disk” on page 61 for instructions on how
to upgrade or replace your hard disk.
3.5-inch floppy drive
Your computer’s 3.5-inch floppy drive supports 720-KB and 1.44-MB
capacity diskettes.
Floppy diskettes are compact, lightweight, and easy to carry around.
Here are some tips on how to take care of your diskettes:
•
Always make backup copies of the diskettes that contain
important data or program files.
•
Keep diskettes away from magnetic fields and sources of heat.
•
Avoid removing a diskette from the floppy drive when the drive
activity indicator is on.
•
Write-protect your diskettes to prevent accidental erasure. To do
this, slide the write-protect tab to the write-protect position (1).
20
2 System tour
Sliding the write-protect tab to the not-write-protect position (2)
will allow you to store and modify data in your diskettes.
•
When you put a label on a 3.5-inch diskette, make sure that the
label is properly attached (flat on the surface) and within the
labeling area (area with a slight surface depression) on the
diskette. An improperly attached label may cause a diskette to get
stuck in the floppy drive when you are inserting or removing it.
CD-ROM/DVD-ROM/CD-RW drive
Your computer may come with a CD-ROM, a DVD-ROM or a CD-RW
drive. This drive is located on the front panel of your computer.
The CD-ROM drive allows you to play different types of compact discs
(CDs).
The DVD-ROM drive allows you to play not only old CD-ROMs, CD-I
discs, and video CDs, but new Digital Video Discs (DVDs) as well. DVD
or DVD-ROM is a new type of CD-ROM that holds a minimum of 4.7-GB
(gigabytes), enough for a full-length movie. It is believed that it will
eventually replace CD-ROMs, as well as VHS video cassettes and laser
discs.
The CD-RW drive allows you to record or burn CD-R/W (Recordable or
Rewritable) discs.
CDs and DVDs, like diskettes, are compact, lightweight, and easy to
carry around. However, they are more delicate than diskettes and
must be handled with extra care. Here are some tips on how to take
care of your CDs and DVDs:
•
Keep your discs in a disk case when not in use to avoid scratches or
other damage. Any kind of dirt or damage can affect the data on
the disc, impair the disc lens reader on the CD-ROM/DVD-ROM/
CD-RW drive, or stop the computer from successfully reading the
disc.
•
When handling discs, always hold them by the edges to avoid
smudges or fingerprints.
21
•
When cleaning discs, use a clean, dust-free cloth and wipe in a
straight line from the center to the edge. Do not wipe in a circular
motion.
•
Clean your CD-ROM/DVD-ROM/CD-RW drive regularly. You may
refer to the cleaning kit for instructions. Cleaning kits can be
purchased in any computer or electronics shop.
To insert a CD/DVD into your computer’s CD-ROM/
DVD-ROM/CD-RW drive:
1
Gently press the drive Stop/Eject button located on the front
panel.
2
When the disc tray slides open, insert the CD/DVD with the label or
title side of the disc facing upward.
22
3
2 System tour
Gently press the disc down to make sure that it is properly
inserted.
Caution! While pressing the CD/DVD, be careful not to bend the
disc tray. Make sure that the CD/DVD is properly inserted before
closing the disc tray. Improper insertion may damage both the
CD/DVD and the CD-ROM/DVD-ROM/CD-RW drive.
4
Gently press the drive Stop/Eject button again to close the disc
tray.
3 Setting up your
computer
This chapter contains step-by-step instructions
on how to set up your computer and connect
additional peripherals.
25
Arranging a comfortable work area
Working safely begins with the arrangement of your work space and
the proper use of equipment. For this reason, it is very important to
take time and think about how you are going to arrange your work
area.
Here are some points to consider:
Adjusting your chair
Having the right kind of chair does not necessarily mean that you’ll be
properly supported. It is necessary to adjust your chair to fit your body.
Proper body posture will make you more comfortable and productive.
•
Avoid tilting your chair. If you have a chair that tilts, lock the tilt
knobs so that your chair will not tilt forward or backward while
you are using your computer.
•
Adjust your chair height in such a way that you can sit on it with
your thighs parallel to the floor and your feet resting flat on the
floor.
•
Rest your body on the chair back. Your torso works harder to
maintain balance if you do not rest your body on the chair back.
Positioning your computer
Take note of the following when selecting a location for your
computer:
•
Do not put your computer near any equipment that might cause
electromagnetic or radio frequency interference such as radio
transmitters, televisions, copy machines, or heating and
air-conditioning equipment.
•
Avoid dusty areas and extremes of temperature and humidity.
•
You may place your computer beside your desk or under your
table, as long as it does not block the space that you need for
working and moving.
26
3 Setting up your computer
Positioning your monitor
Place your monitor at a comfortable viewing distance, usually 50 to 60
centimeters away. Adjust the display in such a way that the top of the
screen is at or slightly below eye level.
Positioning your keyboard
The location of the keyboard is a very important factor to your
posture. Placing it too far away will make your body lean forward
forcing you to sit in an unnatural position. Placing it too high will add
tension to your shoulder muscles.
•
The keyboard should be placed just above your lap. Adjust the
keyboard height by flipping the folding stands located under the
keyboard.
•
Keep your lower arms parallel to the floor as you type. Your upper
arms and shoulders should be relaxed. Then try typing with a light
touch. If you feel any shoulder or neck strain, stop for a while and
check your posture.
•
Position your keyboard in front of your monitor. Putting your
keyboard beside your monitor will make you turn your head while
you type which could add tension to your neck muscles that may
later result in neck strain.
Positioning your mouse
•
The mouse should be placed on the same surface as your keyboard
so that you can reach it with ease.
•
Adjust its position to allow enough space for movement without
making you stretch or lean over.
•
Use your arm to move the mouse. Do not rest your wrist on the
table when moving the mouse.
27
Connecting peripherals
Setting up your computer is easy. For the most part, you only have four
things to connect: the keyboard, the mouse, the monitor, and the
power cable.
Connecting your keyboard
USB keyboard
Plug your USB keyboard cable into any of the USB ports
(black port) located on the front and rear panel of your computer.
28
3 Setting up your computer
PS/2 keyboard
Plug your PS/2 keyboard cable into the PS/2 keyboard port
(purple port) located on the rear panel of your computer.
29
Connecting your mouse
USB mouse
Plug your USB mouse cable into any of the USB ports
(black port) located on the front and rear panel of your computer.
30
3 Setting up your computer
PS/2 mouse
Plug the PS/2 mouse cable into the PS/2 mouse port
located on the rear panel of your computer.
(green port)
31
Serial mouse
Plug the serial mouse cable into any of the the serial ports
(teal or turquoise port) located on the rear panel of your computer.
32
3 Setting up your computer
Connecting a CRT monitor
To connect a monitor, simply plug the CRT monitor cable into the
CRT/LCD monitor port
computer.
(blue port) located on the rear panel of your
Note: Refer to the monitor manual for additonal instructions and
information.
33
Connecting the power cable
Caution! Before you proceed, check the voltage range in your
area. Make sure that it matches your computer’s voltage setting
(refer to page 13 for the location of the voltage selector switch on
the rear panel of your computer). If they don’t match, change
your computer’s voltage setting according to your area’s voltage
range.
Plug the power cable into the power cable socket located on the rear
panel of your computer. Then plug the other end of the power cable
into a power outlet.
34
3 Setting up your computer
Turning on your computer
After connecting the necessary peripherals and plugging in the power
cable, you are now ready to turn the computer on and get to work.
To turn on your computer:
1.
Turn on all peripherals connected to your computer such as the
monitor, printer, fax, speakers, etc.
2
On the rear panel of your computer, set the voltage selector switch
to the voltage range applicable to your area (a) then turn on the
power switch (b).
35
3
On the front panel of your computer, press the power button.
Important: Make sure that the power cable is properly plugged
into an electrical outlet. If you are using a power strip or an AVR
(Auto-Voltage Regulator), make sure that it is plugged in and
turned on.
36
3 Setting up your computer
Turning off your computer
To turn off your computer, on the Windows taskbar click on the Start
button, point to Shut Down..., select Shut down from the
drop-down window then click on OK. You can then turn off all
peripherals connected to your computer.
If you cannot shut down your computer, press the power button for at
least four seconds. Quickly pressing the button may put the computer
in a Suspend mode only.
Note: You do not need to turn off the main power switch every
time you turn off your computer. Turn off the main power switch
only if you will not use your computer for a long time or if your
computer needs servicing.
37
Connecting options
Connecting your printer
Your Veriton 5200 series computer supports parallel, serial and USB
printers.
To connect a parallel printer, plug the printer cable into the parallel/
printer port
computer.
(burgundy port) located on the rear panel of your
Note: The printer shown below is for your reference only. Actual
device model may vary in different countries.
Note: If you are using a serial printer, connect the printer cable
into either serial port 1 or serial port 2 located on the rear panel
of your computer. In the same manner, connect a USB printer by
plugging the printer cable into any of the USB ports located on
the front and rear panel.
38
3 Setting up your computer
Connecting to the network
You can connect your computer to a Local Area Network (LAN) using a
network cable. To do so, simply plug the network cable into the
network port
computer.
(white port) located on the rear panel of your
Note: Consult your operating system manual for information on
how to configure your network setup.
39
Connecting USB devices
Universal Serial Bus (USB) is a new serial bus design that is capable of
cascading peripherals such as a keyboard, mouse, joystick, scanner,
printer and modem. With USB, complex cable connections can be
eliminated.
Your computer comes with four USB ports: two each on both the front
and rear panel. These ports allow you to connect additional USB
devices to your computer without using up its system resources.
To connect a USB device, simply plug the device cable into any of the
USB ports
(black port).
Note: The USB devices shown below are for your reference only.
Actual device models may vary in different countries.
40
3 Setting up your computer
Note: Most USB devices have a built-in USB port which allows you
to connect or daisy-chain more USB devices.
41
Connecting multimedia devices
Your Veriton 5200 series computer comes with multimedia features
which allow you to connect such devices as spea