Ricoh - PJ WX6170N

IP Link® Device Interface
Communication Sheet
rico_1_5940_1.pke
Revision: 7/6/2012
This document provides additional assistance with wiring your Extron IP Link enabled product to your device.
Different components may require a different wiring scheme than those listed below.
For complete operating instructions, refer to the user's manual for the specific Extron IP Link enabled product or
the controlled device manufacturer supplied documentation.
Device Specifications:
Device Type:
Manufacturer:
Firmware Version:
Model(s):
Video Projector
Ricoh
N/A
PJ WX6170N, PJ X6180N
Version History:
Driver
Version
1
Date
7/3/2012
IP Link
Compiler
GC
Version
1.5.1
3.3.2
Notes
Initial version.
Driver Notes:
Page 1 of 3
IP Link® Device Interface
Communication Sheet
rico_1_5940_1.pke
Revision: 7/6/2012
Control Commands & States:
Input
Power Control
Computer 1
Computer 2
Computer 3
HDMI
DisplayPort
Video
S-Video
Viewer
Network
On
Off
Status Available:
Not Available.
MLC60 Series Supported Commands:
Input
Power Control
Computer 1
Computer 2
Computer 3
HDMI
DisplayPort
Video
S-Video
Viewer
Network
On
Off
Page 2 of 3
rico_1_5940_1.pke
IP Link® Device Interface
Communication Sheet
Cable and Adapter Requirements:
F/F RS232 DB9 serial cable.
Notes for the Device:
Serial communication:
Port Type: RS-232
Baud Rate: 9600
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control: None
Pin Assignments Diagram:
Note: Captive screw connector may also be used as a serial connection.
General Notes:
Page 3 of 3
Revision: 7/6/2012