Kimball 2383872 Priority - T-Leg And Post-Leg Bases Assembly Instructions

Priority
Assembly Instructions
TM
1
T-Leg and Post-Leg Bases
1.
Tools Required

4, 5 and 6 MM Allen Wrench/Driver
2.
Hardware Required



3.
M6 x 12 Countersink Head Screw
M6 x 12 Socket Head Screw
M10 x 20 Button Head Screw
4.
When installing a frame with 90” or 96” Support Rails,
first assemble smaller Support Rails with the Support Rail
Connector using M6 x 12 Socket Head Screws (12 per
Support Rail Connector). (Figure A)
Assemble Support Rails to Column (2 per Column) using
M6 x 12 Socket Head Screws (4 or 6 per Column depending on type of Column). (Figure A)
Assemble Top Support to Column using M6 x 12 Countersink Head Screws (2 per Column). (Figure A)
Assemble T Leg Foot to Column using M10 x 20 Button
Head Screws (4 per Column).
Important: After all screws are tightened on T Leg Foot,
re-tighten each screw in same order. (Figure A)
Installation
Important:
- All fasteners using tapped holes should be started by hand to
prevent cross-threading.
- Bases are easiest to assemble when upside-down.
- For Electric Height-Adjustable T-Leg and Post-Leg Bases see
Priority Assembly Instruction 2383883 for proper initialization.
- Set Bases to standard 27 3/4” height unless otherwise specified. 6 MM Allen Wrench is used to make adjustment on Bases
with machine screw adjustment.
Tips
1.
2.
3.
4.
Support Rails are to be oriented as shown in Figure B.
Support Rails and Top Support may be left loose on Column until both are assembled for ease of assembly.
Support Rails are approximately 5” shorter than nom size.
For installing Worksurfaces to Bases, see Priority Worksurface Assembly Instructions 2383879.
Figure A
Support Rail
Connector
(90” & 96” Support
Rails Only)
Support Rail
(2 per Column)
Top Support
M6 x 12 Socket Head
Screw (4 or 6 per
Column depending on
type of Column)
M6 x 12
Countersink
Head Screw
(2 per Top
Support)
M6 x 12 Socket
Head Screw (12
per Support Rail
Connector)
Column
Figure B
Worksurface
M10 x 20 Button
Head Screw
(4 per Column)
T Leg Foot
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call Kimball Office Customer Care.
2383872, Revision B
Support Rail
Orientation