Bosch 1618EVS - 2-1/4 HP Electronic Fixed Base D Handle Router Operating instructions

Power Tools V
SECTION V Index
routers
specialty sanders
Fixed Base..........................................................................................V-2 to V-4
Plunge.................................................................................................V-4 to V-7
Combo Base.................................................................................................. V-7
Trim......................................................................................................V-8 to V-9
Surface Leveling........................................................................................V-10
Flush Trim.....................................................................................................V-10
Coving............................................................................................V-10 to V-11
Corner Rounding.......................................................................................V-11
Bevel Edge...................................................................................................V-11
Laminate.......................................................................................V-12 to V-13
Coving...........................................................................................................V-49
Finishing.......................................................................................................V-50
Detail.............................................................................................................V-50
Linear.............................................................................................................V-50
routers accessories
dust extractors......................................................V-51 to V-52
Dust Extractor Accessories.....................................................V-52 to V-56
portable air hammer.......................................................V-57
blow guns........................................................................................V-57
Milling Machine.......................................................................V-58
Guide Rails & Accessories.......................................................................V-14
Router Tables..............................................................................................V-15
Router Accessories...................................................................................V-16
Template Guides....................................................................................... V-17
Bases..............................................................................................................V-18
Collets...........................................................................................................V-19
Specialty Accessories...............................................................................V-19
finish nailers
Angled...........................................................................................V-20 to V-21
Straight........................................................................................................ V-21
heat gun.............................................................................................V-58
Tool storage systems.....................................................V-59
planers & accessories.....................................V-60 to V-61
circular & Miter saws.....................................................V-62
miter saws.......................................................................................V-62
Circular Saw & Miter Saw Accessories...............................................V-63
Multifunctional tables & Accessories....V-64
joiners
18 Gauge......................................................................................V-22 to V-23
BRAD nailers
15 Gauge......................................................................................................V-24
18 Gauge...................................................................................... V-24 to V-27
micro pinners
23 Gauge.......................................................................................V-27 to V-28
Stapler/Nailer & Repair Kits...................................................................V-28
orbital sanders
3” Round.......................................................................................................V-29
5” Round........................................................................................V-29 to V-33
6” Round........................................................................................V-31 to V-35
8” Round........................................................................................V-35 to V-36
11” Round....................................................................................................V-36
Triangular.....................................................................................................V-36
Rectangular..................................................................................V-37 to V-39
Accessories...................................................................................V-39 to V-46
Doweling......................................................................................................V-65
Biscuit.............................................................................................V-65 to V-66
Accessories..................................................................................................V-66
jig saws.................................................................................V-67 to V-68
Jig Saw Accessories..................................................................................V-68
drills
Air Powered.................................................................................................V-69
Cordless.........................................................................................V-69 to V-70
Accessories...................................................................................V-71 to V-72
air compressors
Air Compressors........................................................................................V-73
Air Hoses.......................................................................................V-73 to V-74
Accessories...................................................................................V-74 to V-76
edgebanding systems......................................................V-77
BELT SANDERs
Without Dust Bag......................................................................................V-47
With Dust Bag.............................................................................V-47 to V-48
Accessories...................................................................................V-48 to V-49
800-BUY-BAER (289-2237)
•
www.baersupply.com
•
Fax: 888-558-2237
Power Tools
STAplers
V-1
V Power Tools
fixed base routers
Fixed Base Router,1-3/4 HP Electric Powered
Knob Handle Design, Single & Variable Speed
• Cam lock lever enables simple coarse height adjustments
and motor release
• Micrometer depth adjustor accurate to 1/128”
• Dust-sealed switch and sealed ball bearing construction
• Precision machined aluminum housing and base
• Auto-release collet system allows for easy bit removal
• Under table stop prevents motor from inadvertently rotating
out of base
• Base: 5-3/4” round
• Weight: 8 lb.
• Both units include: 1/4” and 1/2” collets and collet wrench
Packing & Sold In: Each
Item#
RK690LR
RK690LRVS
HP
Amps
Soft Start
Collet Capacity
No Load Speed (RPM)
RK690LR
1-3/4
11
No
1/4” & 1/2”
Single, 27,500
RK690LRVS
1-3/4
11
Yes
1/4” & 1/2”
Variable, 10,000 -27,500
fixed base Router, 2 HP electric powered
Knob Handle Design, Single Speed
• Coarse and micro fine bit depth adjustment system with resettable depth indicator for fast, precise depth adjustment
• Precision centering design makes it easy to keep bit on intended cut line when using jigs, templets,
dovetail fixtures and similar guidance devices
• Right or left switch location for user preference and consistency (motor does not rotate during depth adjustment)
• Tool-free templet guide adapter for fast and easy templet guide changes
• Classic hardwood handles for comfort and beauty
• Base: 6” round
• Weight: 7.5 lb.
• Includes: 1/4” and 1/2” collets, shaft wrench, collet wrench, tool-free templet guide adapter and chip shield
Packing & Sold In: Each
Item#
HP
Amps
Soft Start
Collet Capacity
No Load Speed (RPM)
BL1617
2
11
No
1/4”, 3/8”, 1/2”
Single, 25,000
Power Tools
Fixed Base Router, 2-1/4 HP Electric Powered
Knob Handle Design, Variable Speed
• Constant-Response Circuitry – maintains constant speed under load, provides overload protection
• Tool-free template guide adapter system and exclusive precision centering design centers bit precisely
• Macro and microfine bit depth adjustment system with resettable depth indicator
• Fixed base has threaded holes for mounting to router table positioned in Bosch 4-hole pattern
and common 3-hole pattern
• Includes RA1161 Fixed-Base with system for adjusting bit height from above a router table
• Dust-sealed power switch
• Base: 6” round
• Weight: 5.0 lb.
• Includes: 1/4” and 1/2” collets, shaftwrench, collet wrench, chip shield, height adjustment wrench
Packing & Sold In: Each
Item#
BL1617EVS
V-2
HP
Amps
Soft Start
Collet Capacity
No Load Speed (RPM)
2-1/4
12
Yes
1/4“, 3/8”, 1/2“
Variable, 8,000 - 25,000
Würth Baer Supply Company
•
Over 40,000 products in-stock EVERYDAY!
Power Tools V
fixed base routers
Fixed Base Router, 2-1/4 HP Electric Powered
Knob Handle Design, Variable Speed
• Full-time electronic feedback maintains motor speed
• Dual-position switch allows user to cut power while maintaining control of the router
• Spindle lock feature allows for single wrench bit changes
• Durable latch lever enables quick and simple coarse depth adjustments and motor release
for transition between bases
• Rack and pinion adjustment provides fine depth settings to 1/128”
• Includes: 1/4” and 1/2” collets, collet wrench and carrying case
Packing & Sold In: Each
Item#
HP
Amps
Soft Start
Collet Capacity
No Load Speed (RPM)
RK892
2-1/4
12
Yes
1/4” & 1/2”
Variable, 10,000 - 23,000
fixed base Router, 3-1/4 HP electric powered
Side Handle Design, Single Speed
• Auto release collet system allows for quick and easy bit removal and exchange
• Precision machined aluminum motor housing and base
• Dust-Sealed switch and sealed ball bearing construction for durability
• Base: 7” round
• Weight: 15.0 lb.
• Includes: 1/2” collet and collet wrench
Packing & Sold In: Each
Item#
HP
Amps
Soft Start
Collet Capacity
No Load Speed (RPM)
RK7519
3-1/4
15
Yes
1/2”
Single, 21,000
• Electronic 5 speed motor with 10,000, 13,000, 16,000, 19,000 and 21,000 rpm settings
• Dust-Sealed switch and sealed ball bearing construction for durability
• Precision machined aluminum housing and base
• Auto-release collet system allows for easy bit removal
• Base: 7” round
• Weight: 14.5 lb.
• Includes: 1/2” collet and collet wrench
Packing & Sold In: Each
Item#
HP
Amps
Soft Start
Collet Capacity
No Load Speed (RPM)
RK7518
3-1/4
15
Yes
1/2”
5 Speed - see text above
800-BUY-BAER (289-2237)
•
www.baersupply.com
•
Fax: 888-558-2237
Power Tools
fixed base router, 3-1/4 HP Electric Powered
Side Handle Design, 5 Speed
V-3
V Power Tools
fixed base & plunge routers
FIXED BaSE Router, 1-3/4 HP Electric Powered
D-Handle Design, Single Speed
• GripVac handle allows for both single hand gripping and enhanced router control when used with standard knob
• D-handle incorporates trigger switch with “lock-on” feature
• Micrometer depth adjustor accurate to 1/128”
• Dust-sealed switch and sealed ball bearing construction for durability
• Precision machined aluminum housing and base
• Auto-release collet system allows for easy bit removal
• Base: round
• Weight: 9.25 lb.
• Includes: 1/4” and 1/2” collets and collet wrench
Packing & Sold In: Each
Item#
HP
Amps
Soft Start
Collet Capacity
No Load Speed (RPM)
RK691
1-3/4
11
No
1/4” & 1/2”
Single, 27,500
fixed base router, 2-1/4 HP electric powered
D-Handle Design, Variable Speed
• Precision centering design makes it easy to keep bit on intended cutline when using jigs,
templets, dovetail fixtures and similar guidance devices
• Coarse and microfine bit depth adjustment system with resettable depth indicator for fast,
precise depth adjustment
• Comfortable D-handle design with reversible auxiliary handle
• Variable speed dial for matching speed to workpiece and task
• Constant Response™ Circuitry maintains constant speed under load, provides overload protection
• Double insulated
• Dust sealed power switch
• Base: 6” round
• Weight: 8.2 lb.
• Includes: 1/4” and 1/2” self-releasing collet chucks, 16mm shaft wrench, 24mm collet nut wrench and chip shield
Packing & Sold In: Each
Item#
Power Tools
BL1618EVS
Amps
Soft Start
Collet Capacity
No Load Speed (RPM)
11
Yes
1/4” & 1/2”
Variable, 8,000 - 25,000
Plunge Router, 3-1/4 HP Electric Powered
Side Handle Design, Variable Speed
• Height adjustment system is accessible through the base for quick, accurate adjustments
• Extended spindle shaft with through the base locking system for easy above table bit changes
• Electronic regulator is sealed from dust and debris
• Base: 7-1/2” round
• Weight: 13 lb.
• Includes: 1/4” and 1/2” collets and collet wrench
Packing & Sold In: Each
Item#
ABFT3000VCE
V-4
HP
2-1/4
HP
Amps
Soft Start
Plunge Depth
Collet Capacity
No Load Speed (RPM)
3-1/4
15
Yes
2-9/16”
1/4” & 1/2”
Variable, 8,000 - 21,000
Würth Baer Supply Company
•
Over 40,000 products in-stock EVERYDAY!
Power Tools V
plunge routers
Plunge Router, 3-1/4 HP Electric Powered
Side Handle Design, Variable Speed
• Converts easily for use with router table and back to upright use
• Bosch exclusive system defeats both plunge lock and plunge springs for effortless depth adjustment
• Coarse and microfine adjustment knobs plus depth rod and turret
• Variable speed dial for matching speed to work piece and task
• Constant-Response circuitry maintains constant speed under load, provides overload protection
• Precision centering design makes it easy to keep bit on intended cut line when using jigs,
templets and similar devices
• Convenient front spindle lock for fast, easy bit changes
• Base: 7-1/2” round
• Weight: 13.2 lb.
• Includes: dust extraction hood, 1/4” and 1/2” self-releasing collet chucks, 24mm collet nut wrench,
free templet guide adapter and vacuum hose adapter
Packing & Sold In: Each
Item#
BL1619EVS
HP
Amps
Soft Start
Plunge Depth
Collet Capacity
No Load Speed (RPM)
3-1/4
15
Yes
2-9/16”
1/4”, 1/2”, 3/8” & 8mm
Variable, 8,000 - 21,000
Plunge Router, 3-1/4 HP Electric Powered
Side Handle Design, Variable Speed
• “Above the table” access to height adjustment and bit changes
• Micro adjustment depth control makes accurate settings quick and easy
• Large on/off switch quick release depth stop
• 3 position depth stop turret
• Base Round: 6-9/16”
• Weight: 13 lb.
• Includes: 1/4” and 1/2” collets, collet wrench and edge guide
Packing & Sold In: Each
Item#
ABFT2200EP
HP
Amps
Soft Start
Plunge Depth
Collet Capacity
No Load Speed (RPM)
3-1/4
15
Yes
2-9/16”
1/4” & 1/2”
Variable, 10,000 - 22,500
Plunge Router, 3-1/4 HP Electric Powered
Side Handle Design, 5 Speed
Power Tools
• Electronic 5 speed motor with 10,000, 13,000, 16,000, 19,000 and 21,000 rpm settings
• Auto-release collet system allows for easy bit removal
• Depth rod with 6-position adjustable turret enables stepped or repeated plunge cuts
• Handle incorporates trigger switch with lock-on feature
• Dust-sealed switch and sealed ball bearing contruction
• Base: 7” round
• Weight: 17.25 lb.
• Includes: 1/2” collet and collet wrench
Packing & Sold In: Each
Item#
HP
Amps
Soft Start
Plunge Depth
Collet Capacity
No Load Speed (RPM)
RK7539
3-1/4
15
Yes
3”
1/2”
5 Speed - see text above
800-BUY-BAER (289-2237)
•
www.baersupply.com
•
Fax: 888-558-2237
V-5
V Power Tools
plunge routers
Plunge Router, 1-1/2 HP Electric Powered
Side Handle Design, Variable Speed
• Festool model #: OF 1010 EQ
• Dust extraction port
• Switch lock – locks the power switch on
• Three adjustable position stop turret for repeatable and consistent step cutting
• Full grip handle is designed for increased control and reduced fatigue
• Integrated switch with variable speed control at the thumb allows use with just one hand
• Micro adjustment depth control to 1/256”
• Base: 5” x 5-1/4” oval
• Weight: 5.94 lb.
• Shipped in Systainer 3 (see page V-61)
• Includes: chip catcher, 1/4” and 8mm collet, dust extraction hood, guide stop,
plug-it power cord, guide bushing adapter
Packing & Sold In: Each
Item#
FJ574266
HP
Amps
Soft Start
Plunge Depth
Collet Capacity
No Load Speed (RPM)
1-1/2
8.3
Yes
2-1/8”
1/4” & 8mm
Variable, 10,000 - 23,000
Plunge Router, 3-1/4 HP Electric Powered
Side Handle Design, Variable Speed
• Festool model #: OF 2200 EB
• Double locking plunge columns – the plunge depth is locked with a single twist of
the locking knob located at your fingertips on the router’s handle
• Retractable, spring loaded 360 degree Dust Shroud
• Single-tool ratcheting collet
• Magnetic Spindle Brake – a faster, more reliable method of retarding spindle motion
• Four position depth stop turret
• Micro adjustment depth control makes accurate settings quick and easy
• Base: 7” x 7-1/ 4“ oval
• Includes: chip catcher, 1/2” collet, dust extraction hood and guide bushing
• Shipped in cardboard box
• Weight: 17.2 lb.
Packing & Sold In: Each
Power Tools
Item#
V-6
FJ574277
HP
Amps
Soft Start
Plunge Depth
Collet Capacity
No Load Speed (RPM)
3-1/4
18
Yes
3-5/32”
1/4”, 1/2” & 8mm
Variable, 10,000 - 22,000
Würth Baer Supply Company
•
Over 40,000 products in-stock EVERYDAY!
Power Tools V
plunge routers
plunge Router, 2 – 2-1/4 HP electric powered
Side Handle Design, Variable Speed
• Festool model #: OF 1400 EQ
• Ratcheting spindle – one wrench bit changes with ratcheting action
• Template guide bushings are self-centering and can be inserted tool-free
• Swiveling chip deflector and dust extraction port
• Three adjustable position stop turret for repeatable and consistent step cutting
• Micro adjustment depth control to 1/256”
• Base: 5-1/4” x 6-1/4” oval
• Weight: 9.9 lb.
• Shipped in Systainer 4
• Includes: chip catcher, 1/4” , 1/2”, and 8mm collet, dust extraction hood, plug-it power cord, guide bushing adapter
Packing & Sold In: Each
Item#
FJ574267
HP
Amps
Soft Start
Plunge Depth
Collet Capacity
No Load Speed (RPM)
2 to 2-1/4
11.7
Yes
2-3/4”
1/4“, 1/2“ & 8mm
Variable, 10,000 - 22,500
PLUNGE Router, 2-1/4 HP Electric Powered
Knob Handle, Variable Speed
• Above-table micro-adjustability accurate to 1/128” increments
• Extended spindle shaft with through base locking feature for easy bit changes above the table
• Sealed electronic regulator and power switch for protection from dust and debris
• Base Round: 6”
• Weight: 7.5 lb.
• Includes: 1/4” collet, 1/2” collet, above table height adjustment knob and carrying case
Packing & Sold In: Each
Item#
ABFT1700VCEK
HP
Amps
Soft Start
Plunge Depth
Collet Capacity
No Load Speed (RPM)
2-1/4
13
Yes
2-1/2”
1/4” & 1/2”
Variable, 10,000 - 23,000
Accessory edge guide: ABFT2020.
• Above-table micro-adjustability accurate to 1/128” increments (fixed base only)
• Extended spindle shaft with through base locking feature for easy bit changes
above the table (fixed base only)
• Sealed electronic regulator and power switch for protection from dust and debris
• Fixed Base Round: 6”
• Plunge Base Round: 6”
• Weight: 7.5 lb.
• Includes: fixed base, plunge base, 1/4” collet, 1/2” collet, above table height adjustment knob, and carrying case
Packing & Sold In: Each
Item#
ABFT1702VCEK
HP
Amps
Soft Start
Plunge Depth
Collet Capacity
No Load Speed (RPM)
2-1/4
13
Yes
2-1/2”
1/4” & 1/2”
Variable, 10,000 - 23,000
Power Tools
Router, 2-1/4 HP Combo Kit
Router with Plunge & Fixed Bases
Accessory Edge Guide: ABFT2020.
800-BUY-BAER (289-2237)
•
www.baersupply.com
•
Fax: 888-558-2237
V-7
V Power Tools
trim routers
Trim Router, Electric Powered
Tilt-Base, 3/4 HP
• Tilt at +45 degrees, -30 degrees
for angled cuts
• Precision cast aluminum base
• Dust-sealed switch and sealed
ball bearing construction
• Base Dimension: 3-1/8” x 3-5/8”
• Weight: 4 lb.
• Includes: collet wrench, and Allen wrench
Packing & Sold In: Each
Trim Router,
Electric Powered
Adjustable Base, 1 HP
• Micro-adjustable base allows for easy
adjustment and accuracy
• Base Dimension: 3-7/8” x 2-3/16”
• Weight: 4.4 lb.
• Includes: 1/4” collet and carrying case
Packing & Sold In: Each
Item#
HP
Amps
Collet
Capacity
Speed (RPM)
RK7319
3/4
5.6
1/4”
30,000
Item#
ABFT750T
HP
Amps
Collet
Capacity
Speed (RPM)
1
6.5
1/4”
27,000
Trim Router, Electric
Powered
Fixed Base, 3/4 HP
• Micro-set adjustment knob enables quick and accurate bit-depth setting
• Spindle lock feature allows for single wrench bit changes
• Precision cast aluminum base
• Dust-sealed switch and sealed ball bearing construction
• Base Dimension: 3-3/8” x 3-5/8”
• Weight: 3.75 lb.
Item#
HP
Amps
• Includes: collet wrench
RK7310
3/4
5.6
Packing & Sold In: Each
Collet
Capacity
Speed
(RPM)
1/4”
30,000
Power Tools
TRIM ROUTER, ELECTRIC POWERED
Multiple Base Kit, 1 HP
• Festool model #: MFK 700
• Integrated guide handle on the vertical and horizontal bases
provide comfort and control while routing
• Quickly and easily change between the horizontal and vertical
bases - all components can be attached and removed without tools
• Utilizes super fine micro-adjustment knob allowing fine tuning of the cut depth
with an accuracy of 1/10mm; dual locking knobs prevent movement once the depth has been set
• Center line indention on each side of the vertical base allows you to align the center of the bit with the cut of the line
• Dust Extraction Port for a dust free environment
• Vertical base includes a threaded insert which accepts template guides adding to the versatility of this router
• Weight: 4.2 lb.
• Shipped in Systainer 2
• Includes: horizontal and vertical base, 1/4” and 8mm collets, dust extraction hood, plug-it power cord,
standard threaded base for U.S guide bushing
Packing & Sold In: Each
Item#
FJ574288
V-8
HP
Amps
Collet Capacity
Speed (RPM)
1
6.0
1/4“ & 8mm
10,000 - 26,000
Würth Baer Supply Company
•
Over 40,000 products in-stock EVERYDAY!
Power Tools V
trim routers
trim router, electric powered
Fixed, Offset, Tilt & Underscribe Bases, 3/4 HP
Item#
HP
Amps
Collet Capacity
Speed (RPM)
RK97311
3/4
5.6
1/4”
30,000
Trim Router,
Electric
Powered
Laminate Seaming Router,
3/4 HP
trim Router,
electric
powered
Underscribe Router,
3/4 HP
• Porter Cable model 3/4 HP motor
• Quickly cuts perfect joints in large sheets of laminate
• Cuts both pieces of laminate at the same time for
a perfect seam
• Ideal when laminates come together at
a miter – no difficult placement of a jig
• Joint can be cut in place, no need to
remove laminate from position to cut
• Includes: solid carbide 1/8” diameter
bit and adjusting wrenches
Packing & Sold In: Each
• Recommended for short cuts (1/4” – 5”)
• Cuts plastic laminates for all types of joints in store fixtures,
face frames, cabinets, and more
• One hand operation, tapered edge automatically
lifts the overlapping laminate for cutting
• Hard coated aluminum plate will not mark
laminate
• Easy to adjust eccentric cam system provides
precise control of cut
• Includes: solid carbide 1/8” diameter bit
and adjusting wrenches
Packing & Sold In: Each
Item#
HP
Amps
Collet
Capacity
Speed
(RPM)
Motor
Brand
BYS7310
3/4
5.6
1/4”
30,000
Porter
Cable
800-BUY-BAER (289-2237)
•
Item#
HP
Amps
Collet
Capacity
Speed
(RPM)
Motor
Brand
BYUPR10E
3/4
5.6
1/4”
30,000
Bosch
BYU7310
3/4
5.6
1/4”
30,000
Porter
Cable
www.baersupply.com
•
Fax: 888-558-2237
Power Tools
• Microset adjustment knob enable quick and accurate bit setting depth
• Kit comes with four bases:
- Fixed base design allow for excellent bit visibility
- Offset base enables back splash trimming, scribing to wall and 90 degree corner trimming
- Tilt base enables angle cuts
- Underscribe sub base allows user to accurately join laminate
• Weight: 3.75 lb.
• Includes: bases described above, case, carbide bit, edge guide, collet and wrenches
Packing & Sold In: Each
V-9
V Power Tools
surface leveling, flush trim & coving routers
Surface Leveling Router, electric powered
3/4 HP
• Quickly removes excess glue from solid surface material
• Aluminum parts are hard coated for durability- won’t mar solid surface material
• Fine adjustments provide excellent results
• Preset to cut 3/8” from inside corner to match radius of cove
• Can be set to cut completely into a 90˚ joint
• Ideal when gluing up for coves, deck seams, inlays, etc.
• Includes: 2” diameter 6-wing carbide bit
Collet
Item#
HP
Amps
and adjusting wrenches
Capacity
Packing & Sold In: Each
BY252
3/4
5.6
1/4”
Speed
(RPM)
Motor
Brand
30,000
Porter
Cable
Replacement cutter: BYEGS618
Flush Trim Router, electric powered
1-3/4 HP
• Trim wood edges flush with a plastic laminate or wood veneer surface
after edging has been applied
• Will not tear out or splinter wood
• Fine adjustment on ball bearing guide allows you to cut edging deeper
than laminate surface without cutting into laminate
• Follows straight or curved edges, inside or outside radius
• Cuts edging up to 1-1/2” wide in a single pass, 3” wide in two passes
• Dust extraction hookup to prevent scratches on gloss laminates
• Includes: 1-1/2” diameter carbide bit and adjusting wrenches
Packing & Sold In: Each
Item#
HP
Amps
Collet Capacity
Speed (RPM)
Motor Brand
BY185
1-3/4
11
1/4” & 1/2”
27,500
Porter Cable
Power Tools
Coving Router, electric powered
3-1/4 HP Porter Cable Motor
• Coving system designed to create coves in any 90 degree joint in solid surfacing material
• Fine adjustments for precise control of cut
• Center guide allows router to be turned or rotated without removing it from the cut
• No tools required for adjustment
• Available Air Glide kit eliminates friction, reduces scratches and gives
you better control by providing constant airflow
• Includes: 3/8” radius carbide bit, interchangeable center guides for 1/4”, 3/8”, 1/2” radius bits
and wrenches BY210D also includes a 10’ hose
Packing & Sold In: Each
Description
HP
Amps
Collet
Capacity
Speed
(RPM)
Motor
Brand
BY210A
Coving Router without Dust Extraction
3-1/4
15
1/2”
27,500
Porter Cable
BY210D
Item#
V - 10
Coving Router with Dust Extraction
3-1/4
15
1/2”
27,500
Porter Cable
BYCB3870
Replacement Bit
-
-
-
-
-
BYRA200
Air Glide Kit
-
-
-
-
-
Würth Baer Supply Company
•
Over 40,000 products in-stock EVERYDAY!
Power Tools V
coving, corner rounding & bevel edge routers
Coving Router,electric Powered
Air Gliding, 3-1/4 HP
• Eliminate Friction – reduces operator fatigue and increases productivity
• Reduces scratches – constant airflow prevents debris and increases accuracy of cut
• No need to lubricate top
• Includes: 3/8” radius carbide bit, interchangeable center guides for 1/4”, 3/8”, 1/2” radius bits and wrenches;
BYAG210-D includes a 10’ hose
Packing & Sold In: Each
Item#
Description
HP
Amps
Collet Capacity
Speed (RPM)
Motor Brand
BYAG210-A
Coving Router without Dust Extraction
3-1/4
15
1/2”
27,500
Porter Cable
BYAG210-D
Coving Router with Dust Extraction
3-1/4
15
1/2”
27,500
Porter Cable
BYCB3870
Replacement Bit
-
-
-
-
-
Corner Rounding Router, Electric Powered
D-Handle Design, 2-1/2 HP
• Radius any 90° outside corner in seconds
• Adjustable for any radius 3/4” to 3 1/2”
• Great for countertops, tables, etc.
• Cuts material up to 2” thick
• Simply hold router on corner with one hand and pivot with the other hand
• Porter Cable 2-1/2 HP motor
• Includes: solid carbide 1/2” diameter bit, adjusting wrenches
Packing & Sold In: Each
Item#
HP
Amps
Collet Capacity
Speed (RPM)
Motor Brand
BY200
2-1/2
15
1/2”
21,000
Porter Cable
• Ideal for countertops, store fixtures, door fronts, etc.
• Two router system for cutting a 45 degree bevel/mortise into a countertop
and then cutting a feature strip to fill the mortise
• Large router comes setup with a 3/8” carbide bit for doing the 3/8” bevel
• Small router has fine tuning adjustments for precise cuts
• Can be used to repair damaged edges
• Includes: Porter Cable 690 and 7310 routers, carbide bits and adjusting wrenches
Packing & Sold In: Each
Item#
BY165
HP
Amps
Collet Capacity
Speed (RPM)
690
7310
690
7310
690
7310
690
7310
1-3/4
3/4
11
5.6
1/4” & 1/2”
1/4”
27,500
30,000
800-BUY-BAER (289-2237)
•
www.baersupply.com
Motor Brand
Power Tools
Bevel Edge Router,Electric Powered
Two Router System
Porter Cable
•
Fax: 888-558-2237
V - 11
V Power Tools
laminate trim routers
Laminate Trimmer, electric powered
Flush & Chamfer Cut Design
• Colonial Saw model # Lamina E2
• For chip-free and precise flush or chamfer cutting of plastic laminates, wood veneers, non-ferrous metals and most composite materials
• Exchangeable base plate made in plastic – no damage to the work-piece surface
• Square stop for flush cutting of edge banding
• Easy set-up for cutting depth and chamfer width by a simple twist of the motor
• Scale to assist in the precise setting of cutting depth and chamfer width
• Power: 300W
• Voltage: 120/230 V
• Speed: 28,000 rpm
Item#
Description
• HM cutter: Z 4, Ø = 30 mm, cut 0° or 35°
LM111990
Laminate
Trimmer
• Weight: 4.19 lb.
• Includes: tool set, wooden case, HM cutter Z4 and square stop
Packing & Sold In: Each
trim router, air powered
Fixed Base
• Flush laminate trimming tool that provides effortless cutting
• Small body design fits comfortably in one hand and the tool’s
weight concentration is located in the base
• Works best with 1/4” diameter bits
• Weight: 2.4 lb.
• Includes: adjusting wrenches
Packing & Sold In: Each
Item#
Collet Capacity
Speed (RPM)
Air Consumption
BVAT
1/4”
25,000
3 CFM at minimum 90 PSI
Power Tools
laminate edge finishing tool, Air or electric Powered
• Trims laminate without hand filing - except inside corners
• Creates a perfect radius cut on 90 degree laminate joints in a single pass
• Adjustable for different laminate thicknesses (standard or vertical grade) without tools
• Finishes filing jobs in minutes
• Patented guide system prevents any chance of gouging work
• Leaning the tools will not cut or dig in
• Includes: bit and adjusting wrenches
Packing & Sold In: Each
Air Version
Item#
Description
Speed (RPM)
Air Consumption
BVAF
Air File Finishing Tool
25,000
3 CFM at minimum 90 PSI
BVAFC
Replacement Bit
-
BVAF
BVEF
electric Version
V - 12
Item#
Description
HP
Amps
Collet Capacity
Speed (RPM)
BVEF
Electric File Finishing Tool
3/40
5.6
1/4”
30,000
BVEFC
Replacement Bit
-
-
-
-
Würth Baer Supply Company
•
Over 40,000 products in-stock EVERYDAY!
Power Tools V
laminate trim tools
laminate trim & finishing kit, air powered
• Beaver Tool model #: Kit 102
• Laminate finishing and trimming tools
• Carbon steel body
• Includes: Air Trimmer (BVAT), Air File (BVAF), high-impact carrying case,
pneumatic oil, and a swivel connector
Packing & Sold In: Each
Item#
BVKIT102
Speed (RPM)
Air Consumption
25,000
3 CFM at minimum 90 PSI
Laminate seamer, Air Powered
Seam With Exhaust System
Item#
Description
Speed (RPM)
Air Consumption
BVASU
Air Laminate Seamer
25,000
3 CFM at minimum 90 PSI
BVASUB
Replacement Bit
-
-
800-BUY-BAER (289-2237)
•
www.baersupply.com
Power Tools
• Laminate joint trimming tool glides effortlessly across one piece of laminate,
while cutting the other piece to length
• Positive edge guide improves the quality of cuts by giving you a stable feel for the laminate edge
• Underscribing bit cuts the laminate cleanly for a perfect surface fit
• Custom exhaust system blows chips and dust away from the seam
• Cool running and durable tool
• Carbon steel body
• Weight: 3.5 lb.
• Includes: bit and adjusting wrenches
Packing & Sold In: Each
•
Fax: 888-558-2237
V - 13
V Power Tools
guide rails & accessories for plunge routers
guide rails for plunge routers
With Splinterguard
• For guidance of plunge saws or routers
• Cut mark matches the cut line with the zero clearance guide rail
• Quick setup with non-slipping bottom strips
• Repeat cuts with limit stops
• System integration, same rail for saw, router or jigsaw
• Bottom T-slot clamp
Packing & Sold In: Each
Item#
32” Length to 197” Length
Guide Rail Length
FJ491499
32”
FJ491504
42”
FJ491498
55”
FJ491503
75”
FJ491502
95”
FJ491937
106”
FJ491501
118”
FJ491500
197”
FJ491621
42” for 32mm Hole Drilling System
FJ491622
95” for 32mm Hole Drilling System
42” or 95” for 32mm Hole
Drilling System
guide rail accessories
NOTE: For use with Festool® series guide rails only.
Packing & Sold In: Each
Description
Power Tools
A
V - 14
B
Item#
Tote Bag
• Transport and store rails up to 1400mm
• Bag can store 2 rails up to 1400mm in the main pocket and another 800mm
rail in the front pocket
• Cloth strap handles and shoulder strap
A
FJ466357
B
Replacement Splinter Guard
• Adhesive backed to maintain splinter free cut quality
FS-SP 1400 (55”) Splinterguard
FJ483164
FS-SP 3000 (118”) Splinterguard
FJ488467
D
C
Guide Rail Connector
• Connects two guide rails by sliding into the T-slot grooves in the rails
• 2 adjustable set screws per end for a secure connection included
FJ482107
D
Angle Unit
• Connects the upper T-slot of Festool® guide rails for setting angles on material
• 180˚ marked scale
• Transfer angles from the wall to the workpiece
FJ491588
E
Gecko Guide Rail Adapters
• Lever actuated suction cup pads
• Attach the Gecko clamp to clamp Festool® guide rails on non-porous materials
FJ493507
Würth Baer Supply Company
•
C
E
Over 40,000 products in-stock EVERYDAY!
Power Tools V
router tables & accessories
Portable Router Table System
• Freud model #: RTP1000
• Features a sturdy folding stand for easy storage and portability
• Table top has a large center opening to allow the router to be removed from above the table,
and features a standard 3/4” T-track for infinite adjustability
• Dual adjusting SH-5 fence has shaper/joiner capabilities and can be quickly adjusted or
removed from the table
• Table height: 14”
• Top dimensions: 23.5” x 18.5”
• Plate dimensions: 9” x 12”
• Fence: Dual micro-adjustable
• System includes: aluminum insert plate with 8 leveling screws, 2 snap down rings
and starter pin; sturdy table top with 3/4” T-track; SH-5 micro-adjustable fence system with dust port
Packing & Sold In: Each
Item#
ABRTP1000
Router Table System
• Freud model #: RTS5000
• Router table and fence combination package
• Dual adjusting SH-5 fence has shaper/joiner capabilities and is accurate to .001”
on both in-feed & out-feed fences
• Sturdy 16 gauge legs
• Table height: 32” to 38”
• Top dimensions: 31.5” x 23.5” x 1”
• Plate dimensions: 9” x 12”
• Fence: Dual micro-adjustable
• System includes: adjustable steel stand; aluminum insert plate with 8 leveling screws,
2 snap down rings and starter pin; sturdy table top with 3/4” T-track;
SH-5 micro-adjustable fence system with dust port
Packing & Sold In: Each
Item#
table system accessories
Vertical Feather Board
• Freud’s universal Feather Board can be used vertically or horizontally and can be adjusted for that perfect amount of
tension that any task may require
• Comes with all the necessary hardware and track insert to fit standard 3/4” T-track
• For use with RTS 5000 Router Table Systems and RTP 1000
Packing & Sold In: Each
Power Tools
ABRTS5000
Item#
ABBF3510
800-BUY-BAER (289-2237)
•
www.baersupply.com
•
Fax: 888-558-2237
V - 15
V Power Tools
router accessories
Router accessories
Edge Guide for Of 1400EQ
Plunge Router
router
accessories
Parallel Edge Guide For MFK700 Routers
• Plunge router edge guide
• Allows to run the router parallel
to an edge
NOTE: For use with FJ574267
(OF 1400 EQ) only.
Packing & Sold In: Each
• Create groove, flutes, dados, ploughs and rabbits in
parallel to an edge with 1/256” (1/10mm)
fine adjustment ability
• Included dust extraction hood accepts
standard 27mm hose
Packing & Sold In: Each
Item#
Item#
FJ492636
FJ495182
Router accessories
Guide Stop for OF 1400 EQ
Plunge Router
router
accessories
Table Widener for OF1400 EQ Plunge
Router
• Plunge router guide stop
with fine adjuster
• Slot in base engages rib
on guide rail
NOTE: For use with FJ574267
(OF 1400 EQ) only.
Packing & Sold In: Each
• Plunge router table widener
• Oversized heavy duty base plate with integrated dust hood
• Increased hole diameter for larger edge forming bits
NOTE: For use with FJ574267 (OF 1400 EQ) only.
Packing & Sold In: Each
Item#
Item#
FJ493233
FJ492601
Power Tools
router accessories
Guide Rail Accessory Kit
A complete kit to maximize usage with plunge saws or routers.
• Kit includes:
- Angle unit (491588)
- Return/limit stop (491582)
- Extra splinter guard 1400mm (55”, 483164)
- Deflector (489022)
- 2 connectors (482107)
- 2 screw clamps (489570)
- In Systainer 1 (see page V-61)
with molded insert (445433)
Packing & Sold In: Each
Router
Accessories
For Use with Festool FJ574277 Router
• Imperial accessory kit for OF 2200 EB
• Includes: Parallel edge guide, guide stop, guide rods, table
widener base, small bore base, template
guide base, offset base for
guide rail & metric template
guide bushings
Packing & Sold In: Each
Item#
FJ495249
Item#
FJ492396
V - 16
Würth Baer Supply Company
•
Over 40,000 products in-stock EVERYDAY!
Power Tools V
router template guides
router accessories
FT2020 Template Guide Set
• Guides and adapter are machined out of a special brass alloy for precision and long life
• Adapter plate can be used with Freud ABFT1700VCE, ABFT2000E, ABFT2200E, and ABFT3000 routers
• Template guides will work with any router or adapter that accepts universal template guides
• Set includes: all of the above template guides, adapter plate, lock nut, and a sturdy carrying case
Packing & Sold In: Each
Item#
ABFT2020
router accessories
Quick Change Template Guide
router accessories
Template Guide Adapter
• Use with Bosch 1613, 1614, 1617, 1618 and
1619 series routers
Packing & Sold In: Each
• Adapts Bosch 1600 series routers to accept competitive
template guides
• Use with Porter Cable, Black & Decker or any similar
template guides
Packing & Sold In: Each
Application
Distance
Past Base
Outside
Dia.
Inside
Dia.
BLRA1111
General Purpose
3/16”
5/8”
17/32”
BLRA1113
Radius Hinge, 1/4
1/2”
5/8”
17/32”
Item#
Item#
BL2-610-906-290
router accessories
Template Guides
• Fit standard 1-3/16” diameter center hole
router sub-bases
Packing & Sold In: Each
Item#
Template Guide
Purpose
Lock Nut
I.D.
O.D.
Distance Past Base
Stair Routing 1-1/8” Thick Treads
1-1/32”
1-1/4”
7/16”
RK42024
Lock Face Routing
21/32”
3/4”
9/16”
RK42033
General Routing
13/32”
1/2”
5/16”
RK42036
General Routing
9/32”
3/8”
5/16”
RK42042
Hinge Butt Routing
5/8”
51/64”
9/16”
RK42045
For Use with Stanley T-3 Template
17/32”
5/8”
9/16”
RK42046
Omnijig Template
17/32”
5/8”
7/32”
RK42237
Lock Nut for All Template Guides
RK42000
Template Guide Kit Contains Template #’s: 42024, 42036, 42027, 42033, 42045,
42057, 42042 and Lock Nut 42237 (2)
800-BUY-BAER (289-2237)
•
www.baersupply.com
Power Tools
RK42021
•
Fax: 888-558-2237
V - 17
V Power Tools
router bases & accessories
router accessories
Tilt Base
router accessories
Router Base/Sub Base
• Use with Porter Cable 7310 when tilt base is needed
• Can also be used as replacement
tilt base for Porter Cable 7319
Packing & Sold In: Each
Packing & Sold In: Each
Item#
RK7318
RK Base
Item#
Type
Fits Router/Trimmer
RK1001
Fixed Base
100 + 690 Series
RK10695
Sub-Base
7500 Series
RK42186
Sub-Base
690 Series
RK810272
Sub-Base
309
RK Sub-Base
router
accessories
Horizontal Base Unit for MFK700EQ
Trim Router
laminate trimmer
accessories
Trimmer Base
Packing & Sold In: Each
• 0˚ Unit-Designed for straight
routing in the horizontal
configuration
• Features 1/10mm (1/256”)
adjustments
Packing & Sold In: Each
Item#
Degree of Unit
FJ491427
0˚
FJ495165
1.5˚
Power Tools
BL3-605-702-619
-
BL1608, 1608LX
BL3-605-702-613
BL-3-600-190-514
BL1608T
• Transfers directly from jamb to door (or vice-versa) with hinges on
either side of door – no turning template end over end
• No straight edges, measuring tools or calculations required
• Works with or without the stops installed
• Template guide required
• Kit includes: deluxe hinge template, metal case, (1) regular &
(1) extra long top gauge assembly (3601321516),
template guide (82864), & bit (85159)
Packing & Sold In: Each
• Includes 1/8” carbide bit
• Fits Porter Cable 7310
Packing & Sold In: Each
Item#
BYUB7310
Würth Baer Supply Company
Fits Routers/
Trimmers
router accessories
Deluxe Door & Jamb
Hinge Template Kit
router
accessories
Underscribe Router Base For
Porter Cable Trimmers
V - 18
Sub-Base#
Item#
•
Item#
Description
BL83038
Template Kit
BL82864
Replacement
Template
Guide
Over 40,000 products in-stock EVERYDAY!
Power Tools V
router accessories
router accessories
Router Collets
router accessories
Router Collets
Packing & Sold In: Each
Packing & Sold In: Each
Item#
Description
For Porter Cable Models
RK42975
3/8” Collet
690 & 890 Series Bases
Item#
RK42950
1/2” Collet
690 & 890 Series Bases
BL2-610-906-284
Description
For Bosch Models
1/2” Collet
1604, 1606 and 1613 Series
router
accessories
Scribing Attachment
router
accessories
Cove Stick Clamps
• Allows your offset router to precisely follow the wall while
accurately cutting countertops, cabinet ends, etc.
• Designed to fit Bosch 1609, Porter Cable 312 and Porter Cable
7312 (routers sold separately).
• No turning the top around to make the cut
• Eliminates caulking
• No rub marks on walls
Packing & Sold In: Each
• Simplify the glue up for coves
• Attach only to the front of
material
• Spring pressure provides
even force
Packing: As shown below.
Sold In: Both broken and full
box quantities. Discount
available for full box orders.
Item#
QSQUICKSCRIBE
Item#
Box Qty
BY226
10
underscribe router accessories
Drum Attachments
Item#
BYDRUM
Power Tools
• Allows you to cut joints on a cylindrical surface
• Helps stabilize router perpendicular to the workpiece
• For use with BYPR10E and BYU7310 underscribe routers
Packing & Sold In: Each
router accessories
Dust Collector For Porter Cable 7500 Series
• Compatible with all Porter Cable 7500 series router bases
• Sub-base with dust collection attachment
• 1/2” thick sub-base includes dust collection nozzle to attach to most 1-1/2” hoses
• Ideal for use during plunge routing
Packing & Sold In: Each
Item#
RK39700
For Porter Cable Model
7500 Series
800-BUY-BAER (289-2237)
•
www.baersupply.com
•
Fax: 888-558-2237
V - 19
V Power Tools
angled finish nailers
ANGLED FINISH NAILER, AIR POWERED
Drive 15 Gauge Angled Finishing Nails 1” – 2”
• Applications include construction finishing, furniture and cabinets, paneling, door and window casings and upholstery trim panels
• Adjustable depth-of-drive allows for flush drive or precision countersinking at lower air pressure
• Rear exhaust directs dust away from the workpiece and is adjustable for user comfort
• Neverlube Design means no tool lubrication to stain fine woods
• No mar pad prevents scuffs on wood
• Belt hook that can be attached to either side of the tool for left or right handed users
• EZ-Clear™ Latch – to clear jams fast
• Restrictive Trigger Firing Mode: Trigger must be released and pulled each time
a nail is driven
• Includes: tool and carrying case
Packing & Sold In: Each
Item#
SNSFN30-620002N
Gauge
Fastener
Range
Fastener
Capacity
Operating Air
Pressure
Tool Size
Weight
Mfr.
Warranty
15
1” – 2”
104
70-120 psi
9-5/8”H x 12”L
3.6 lb.
1 year
Power Tools
ANGLED FINISH NAILER, AIR POWERED
Drive 15 Gauge Angled Finishing Nails 1-1/4” – 2-1/2”
• Applications include construction finishing, furniture and cabinets, paneling, door and window casings and upholstery trim panels
• Thumb wheel adjustable depth-of-drive drives nails to a consistent and controllable depth
• Rear exhaust directs dust away from the workpiece and is adjustable for user comfort
• Neverlube Design means no tool lubrication to stain fine woods
• Two No-Mar pads with onboard storage to protect work materials
• Removable belt hook hooks onto your tool belt, not the tool
• EZ-Clear™ Latch – to clear jams fast
• Construction ruler etched into base of tool for quick measurements
• Magnesium housing is durable and lightweight for comfortable use over
extended periods of time
• Stretch comfort grip reduces fatigue
• Restrictive Trigger Firing Mode: Trigger must be released and pulled each
time a nail is driven
• Includes: tool and carrying case
Packing & Sold In: Each
Item#
SNFP42XP
V - 20
Gauge
Fastener
Range
Fastener
Capacity
Operating Air
Pressure
Tool Size
Weight
Mfr.
Warranty
15
1-1/4” – 2-1/2”
100
70-120 psi
11-5/8”H x 12”L
4.7 lb.
5 year
Würth Baer Supply Company
•
Over 40,000 products in-stock EVERYDAY!
Power Tools V
angled & straight finish nailers
ANGLED FINISH NAILER, AIR POWERED
Drive 15 Gauge Angled Finishing Nails 1-1/4” – 2-1/2”
• Applications include baseboards, case goods, chair rails, decorative trim, furniture and paneling
• Tool-Less adjustable depth of drive
• Adjustable air exhaust
• Tool-Less quick clear for easy removal of jammed nails
• On board no mar tip storage
• In-Line self-cleaning air filter that keeps debris from the valve and 0-ring, leading to
improved tool life
• Slim body for better line of sight and better control
• Dry Fire Lock-Out avoids damage to workpiece by preventing blank firing
• Tool-Less selectable trigger firing mode allows you to easily switch between:
- Restrictive Trigger Firing Mode: trigger must be released and pulled each time a nail is driven
- Contact Actuation: hold the trigger in and the tool will continually fire each time you bump it on the workpiece
• Includes: tool, safety glasses and carrying case
Packing & Sold In: Each
Item#
BLFNA250-15
Gauge
Fastener
Range
Fastener
Capacity
Operating Air
Pressure
Tool Size
Weight
Mfr.
Warranty
15
1-1/4” – 2-1/2”
100
60-120 psi
10”H x 11.75”L
4 lb.
1 year
STRAIGHT FINISH NAILER, AIR POWERED
Drive 16 Gauge Straight Finishing Nails 1” – 2-1/2”
Applications include baseboards, case goods, chair rails, decorative trim, furniture and paneling
• Tool-less adjustable depth of drive
• Adjustable air exhaust
• Tool-less Quick Clear for easy removal of jammed nails
• On board no mar tip storage
• In-line self-cleaning air filter that keeps debris from the valve and 0-ring,
leading to improved tool life
• Slim body for better line of sight and better control
• Dry Fire Lock-Out avoids damage to workpiece by preventing blank firing
• Tool-Less Selectable Trigger Firing Mode allows you to easily switch between:
Power Tools
- Restrictive trigger firing mode: Trigger must be released and pulled each time a nail is driven
- Contact actuation: Hold the trigger in and the tool will continually fire each time you bump it on the workpiece
• Includes: tool, safety glasses and carrying case
Packing & Sold In: Each
Item#
BLFNS250-16
Gauge
Fastener
Range
Fastener
Capacity
Operating Air
Pressure
Tool Size
Weight
Mfr.
Warranty
16
1” – 2-1/2”
100
60-120 psi
9.94”H x 10.25”L
3.5 lb.
1 year
800-BUY-BAER (289-2237)
•
www.baersupply.com
•
Fax: 888-558-2237
V - 21
V Power Tools
18 gauge staplers
Stapler, Air powered
Drives 18 Gauge 1/4”
Narrow Crown Staples Up to 1”
Stapler, AIR POWERED
Drives 18 Gauge 1/4” Narrow
Crown Staples Up to 1-1/2”
• Porter Cable model #: NS100B
• Split nose design for easy removal
of jammed staples
• Rear exhausts keeps oil and dust
away from work surface
• Tool free depth of drive adjustment
with detents for proper setting
• Low staple load indicator
• Firing Modes: Sequential with lock off mode
• Staple Length Range: 1/2” to 1”
• Staple capacity: 100
• Dimensions: 8.75”H, 10.25”L
• Operating Air Pressure: 70 to 120 psig
• Weight: 2.6 lb.
• Lip Length: .75”
• Unit includes carrying case, sample staple pack
and safety glasses
Packing & Sold In: Each
• Porter Cable model #: NS150B
• Split nose design for easy removal of
jammed staples
• Rear exhausts keeps oil and dust away
from work surface
• Tool free depth of drive adjustment with
detents for proper setting
• Low staple load indicator
• Firing Modes: selectable trigger with restrictive or
contact actuation modes
• Staple Length Range: .5” to 1.5”
• Staple Capacity: 100
• Dimensions: 8.75”H, 10.25”L
• Operating Air Pressure: 70 to 120 psig
• Weight: 2.6 lb.
• Lip Length: .75”
• Unit includes carrying case, sample staple pack and safety glasses
Packing & Sold In: Each
Item#
Power Tools
RKNS100A
Item#
Sequential Trigger Stapler
RKNS150A
Description
Sequential Trigger Stapler
Stapler, air powered
Drives 18 Gauge 1/4” Crown
Staples Up to 1-1/2”
Stapler, air powered
Drives 18 Gauge 1/4”
Narrow Crown Up to 1-1/2”
• Senco model #: SLS181W0002N
• Lightweight (only 2.9 lb.) stapler designed to drive staples into
hardwoods, high power driver than can drive up to fasteners up
to 1-1/2” long
• Rear exhausts keeps oil and dust away from work surface
• Easy open latch for quick loading and low staple load indicator
• Firing Modes: bump or contact actuation
• Staple Length Range: .5” to 1.5”
• Staple Capacity: 110
• Dimensions: 9”H, 10”L
• Operating Air Pressure: 70 to 120 psig
• Weight: 2.9 lb.
• Lip Length: .75”
• Unit includes case, oil, hex wrench
and staple rebate coupon
Packing & Sold In: Each
• Senco model #: SKSL4450
• Applications include: cabinets, drawers, spring clip attachment
in furniture assembly, trim, molding, wood crafts
• Features E-Z Load/ E-Z Clear system
• NeverLube design requires no lubrication
• Quiet operation
• Firing Modes: contact actuation
• Staple Length Range: .875” to 1.5”
• Staple Capacity: 158
• Dimensions: 9.375” H, 12.375” L
• Operating Air Pressure: 70 to 120 psig
• Weight: 4.2 lb.
Packing & Sold In: Each
Item#
SNSLS18NR
V - 22
Description
Item#
SNSKSL4450-1-1/2
Description
Contact Actuation
Trigger Stapler
Würth Baer Supply Company
•
Over 40,000 products in-stock EVERYDAY!
Power Tools V
18 gauge staplers
Stapler, air powered
Drives 18 Gauge 1/4” Narrow
Crown Up to 1-1/2”
Stapler, air powered
Drives 18 Gauge 1/4” Narrow
Crown Up to 1-1/2”
• Senco model #: SLS25XP-L
• Light weight (2.7 lb.) for ease of handling
• Adjustable depth-of-drive for precise staple setting
• No-mar pad keeps work surfaces free of marks
• Oil-free design means easier maintenance and
no lubrication to stain fine wood
• Quiet operation
• Heavy duty components,
including aluminum sleeve
and piston
• Firing modes: Contact or
sequential actuation
• Staple length: 3/8” to 1-1/2”
• Staple capacity: 145-168
• Dimensions: 9” H, 12” L
• Operating air pressure: 70 to 120 psi
• Weight: 2.7 lb.
Item#
Packing & Sold In: Each
•
•
•
•
•
stapler,
air powered
Drives 18 Gauge 1/4”
Narrow Crown Staples Up To 1-9/16”
• Würth model #: 7035770
• Applications include door and window molding, cabinet
and furniture assembly, aluminum and vinyl siding
• Quick release design for removing jams
• Rear exhausts keeps oil and dust away from work surface
• Firing Modes: Selectable trigger with restrictive or
contact actuation modes
• Belt hook and no-mar pad
• Staple length range: 1/2” – 1-9/16”
• Staple Capacity: 100
• Dimensions: 9.09”H, 9.53”L
• Operating Air Pressure:
72.51 to 116.03 psig
• Weight: 2.56 lb.
• Unit includes safety glasses
and air tool oil
Packing & Sold In: Each
Item#
WW7035770
Item#
BLSTN150-18
Stapler, air powered
Drives 18 Gauge Brad Nails
5/8” to 1-1/4”, Staples 1/2” to 1”
• Senco model #: FP2N1
• Lightweight (2.75lb.) 2 in 1 tool offers both brad nailing
and stapling
• Nailing applications include: furniture repair, cabinets,
drawer assembly, case backs, small trim,
chair rails, picture frames and ornamentals
• Stapling applications include: shelving, soffits, fascia,
cabinets, picture frames, and craft assembly
• Adjustable depth of drive
• Rear exhaust keeps oil and debris off the work surface
• No-mar magazine bumper protects the work surface
• Includes case, fitting, oil and fastener rebate
• Firing Modes: Sequential Action
• Brad nail range: 5/8” to 1-1/4”
• Staple range: 1/2” to 1”
• Staple or Brad nail capacity: 110
• Dimensions: 7-1/2” H, 10” L
• Lip Length: 0”
• Weight: 2.75 lb.
• Operating Air Pressure: 70 to 120 psi
Packing & Sold In: Each
Power Tools
SNSLS25XP-L
Bosch model #: STN150-18
Full force technology engineered to eliminate wasted power and space
Tool-less quick clear – easy removal of jammed staples
Tool-less adjustable depth of drive
Dry Fire Lock-Out – avoids damage to work materials by preventing
blank firing
• Tool-less Selectable Trigger – easily switch between sequential or
contact actuation
• Applications include: exterior trim, cabinetry, or countertops
• Firing Modes: Sequential and Contact Actuation
• Staple Length range: 1/2” to 1-1/2”
• Dimensions: 9.75”H, 9”L, 2.25”W
• Operating Air Pressure: 60 to 120 psig
• Weight: 2.1 lb.
• Includes: (1) pair of safety glasses,
(1) no-mar tip, and carrying case
Packing & Sold In: Each
Item#
SNFP2N1
800-BUY-BAER (289-2237)
•
www.baersupply.com
•
Fax: 888-558-2237
V - 23
V Power Tools
15 & 18 gauge brad nailers
Brad Nailer, battery powered
Drives 15 Gauge Brad Nails Up to 2-1/2”
• Senco model #: CF41
• Switchable drive control for sequential or contact actuation mode
• Capable of driving up to 4 nails per second and 600 nails per battery charge
• Adjustable depth-of-drive control
• No mar pad
• EZ Clear latch – to clear jams fast
• Applications include: cabinets, decorative trim, drawers, molding
• Firing Modes: Sequential or contact actuation
• Brad Nail Length range: 1-1/4” to 2-1/2”
• Brad Nail Capacity: 110
• Dimensions: 11-7/8” H, 11-3/4”L
• Battery voltage: 14.4
• Weight: 6.3 lb.
• Includes: case, 2 batteries and 1-hour charger
Packing & Sold In: Each
Item#
SNCF41
Power Tools
Brad Nailer, air powered
Drives 18 Gauge Brad Nails 5/8” To 1-3/8”
V - 24
• Senco model #: FP15MG
• Magnesium body ultra lightweight (2.19 lb.) Brad Nailer
• Applications include: chair rail, baseboards, ornamentals, case backs, cabinetry, furniture repair, small trim and craft assembly
• Oil free motor eliminates oil carryover onto the work surface
• Selectable trigger lets you control the fastening method with the flip of a switch
• Rotatable rear exhaust and belt hook keeps dust and debris of the work surface
• Includes case, swivel plug and wrench
• Firing Modes: Sequential Actuation or Contact Actuation
• Brad Nail Range: 5/8” to 1-3/8”
• Brad Nail Capacity: 110
• Dimensions: 8-1/4” H, 10-1/2” L, 2-1/2” W
• Operating Air Pressure: 70 to 120 PSI
• Air Consumption (60 cycles per min): .84scfm
• Air inlet: 1/4” NPT
• Weight: 2.19 lb.
Packing & Sold In: Each
Item#
SNFP15MG
Description
Selectable Trigger Brad Nailer
Würth Baer Supply Company
•
Over 40,000 products in-stock EVERYDAY!
Power Tools V
18 gauge brad nailers
Brad Nailer, air powered
Drives 18 Gauge Slight Head Brad Nails 5/8” To 1”,
Medium Head Brads 5/8” to 1-5/8”
• Senco model #: SLP20
• Lightest weight (2.3 lb.) 2 in 1 tool offers both slight and medium head brad nailing
• Applications include: cabinets, decorative trim, drawers, furniture frames, small trim, picture frames, molding, rattan furniture
window beading
• Features easy side loading that allows to change brad length without adjuting tool, plus E-Z clear jam clearance
• Oil free design means easier maintenance and no lubrication to stain fine woods
• Requires minimum maintenance, with only two movable O-rings for virtually trouble free up-keep
• Includes heavy-duty plastic case
• Firing Modes: Sequential Action
• Slight Head Brad Range: 5/8” to 1”
• Medium Head Brad Range: 5/8” to 1-5/8”
• Brad nail capacity: 110
• Dimensions: 8-1/4”H, 9-1/2”L
• Operating Air Pressure: 70 to 120 psig
• Weight: 2.3 lb.
Packing & Sold In: Each
Item#
Description
SNSLP20-43010N
Sequential Actuation Trigger Brad Nailer
Brad Nailer, air powered
Drives 18 Gauge Brad Nails 5/8” To 1-3/8”
Item#
BLBNS200-18
Power Tools
• Bosch model #: BNS200-18
• Full Force Technology engineered to eliminate wasted power and space
• Tool-less Quick Clear – easy removal of jammed nails
• Tool-less Adjustable Depth of Drive
• Dry Fire Lock-Out – avoids damage to work materials by preventing blank firing
• Tool-less Selectable Trigger – easily switch between sequential or contact actuation
• Applications include: nailing in blind spots, case goods, decorative trim, and paneling
• Firing Modes: Sequential and Contact Actuation
• Brad Nail Length Range: 5/8” to 2”
• Dimensions: 9.75”H, 9”L, 2.25”W
• Operating Air Pressure: 60 to 120 psig
• Weight: 2.1 lb.
• Includes: (1) pair of safety glasses, (1) no-mar tip, and carrying case
Packing & Sold In: Each
Description
Sequential or Contact Actuation Brad Nailer
800-BUY-BAER (289-2237)
•
www.baersupply.com
•
Fax: 888-558-2237
V - 25
V Power Tools
18 gauge brad nailers
Brad Nailer,
Air powered
Drives 18 Gauge Brad Nails Up to 2”
• Senco model #: FP18
• Extra power – drives fastener up to 2” in hard wood applications
• Adjustable depth-of-drive
• Rear exhaust – keeps oil and dust away from work surface
• No mar pad
• Easy open latch – for quick loading
• Low load indicator
• Belt hook
• Applications include: cabinets, small trim, chair rails, case backs,
ornamentals
• Firing Modes: Sequential actuation
• Brad Nail Length range: 5/8” to 2”
• Brad Nail Capacity: 110
• Dimensions: 9.1” H, 10” L
• Operating Air Pressure: 70-120 psig
• Weight: 2.9 lb.
• Lip Length: 3/4”
• Includes case, fitting, oil and
hex wrench
Packing & Sold In: Each
Item#
• Senco model #: FP25XP
• Drives slight and medium head 18 gauge brads from
5/8” to 2-1/8”
• NeverLube technology – no lubrication required
• No mar pad
• On-tool power adjustment
• Comfort and convenient features include: overmold comfort
grip, overmold trigger, 360 degree adjustable exhaust, and
belt hook
• Applications include: molding, decorative trim, cabinets,
drawers, picture frame assembly
• Firing Modes: Sequential actuation
• Brad Nail Length Range: 5/8” to 2-1/8”
• Brad Nail Capacity: 110
• Dimensions: 10” H, 10” L, 2.2” W
• Operating Air Pressure: 70-120 psig
• Weight: 2.7 lb.
Packing & Sold In: Each
Item#
Description
SNFP18
Brad Nailer,
Air powered
Drives 18 Gauge Brad Nails
Up to 2-1/8”
SNFP25XP
Sequential Actuation Trigger Brad Nailer
Description
Sequential Actuation
Trigger Brad Nailer
Power Tools
brad nailer, air powered
Drives 18 Gauge Brad Nails Up To 2-1/8”
• Würth model #: 7035790
• Applications include light furniture/cabinet assembly, trim and molding, light framing, flooring and paneling
• Shoots both standard brad nails and slight head brad nails
• Quick release design for removing jams
• Rear exhausts keeps oil and dust away from work surface
• Firing Modes: Selectable trigger with restrictive or contact actuation modes
• Side loading magazine
• Belt hook and no-mar pad
• Brad Nail length range: 5/8” – 2-1/8”
• Brad Nail Capacity: 100
• Dimensions: 9.56”H, 10”L
• Operating Air Pressure: 72.51 to 116.03 psig
• Weight: 2.51 lb.
• Unit includes safety glasses and air tool oil
Packing & Sold In: Each
Item#
WW7035790
V - 26
Description
Selectable Trigger Brad Nailer
Würth Baer Supply Company
•
Over 40,000 products in-stock EVERYDAY!
Power Tools V
18 gauge brad nailers & 23 gauge micro pinners
Brad Nailer,
battery powered
Drives 18 Gauge Brad Nails Up to 2-1/8”
Micro pinner,air powered
Drives 23 Gauge
Micro Pins Up to 1”
• Senco model #: CF25
• Switchable drive control for sequential or contact actuation mode
• Capable of driving up to 4 nails per second and 1000 nails per
battery charge
• Adjustable depth-of-drive control
• No mar pad
• EZ Clear latch – to clear jams fast
• Applications include: cabinets, decorative trim, drawers, molding
• Firing Modes: Sequential or contact actuation
• Brad Nail Length Range: 5/8” to 2-1/8”
• Brad Nail Capacity: 110
• Dimensions: 11-7/8” H, 11-3/4”L
• Battery voltage: 14.4
• Weight: 6.3 lb.
• Includes: case, 2 batteries, and 1-hour
charger
Packing & Sold In: Each
• Porter Cable model #: PIN100
• Tool automatically adjusts for different fastener lengths for
easier loading
• Convenient bottom-load magazine
• Rear exhaust – directs oil and dust away from user
• Dual trigger feature
• Low pin reload indicator
• Unit includes sample 23 gauge pins,
1/4” air fitting with dust cover, oil,
wrench, and carrying case
• Firing Modes: Contact or Sequential
Actuation
• Pin Length range: 1/2” to 1”
• Pin Capacity: 170
• Dimensions: 6.25” H, 9” L
• Operating Air Pressure: 60 to 100 psi
• Weight: 2 lb.
Packing & Sold In: Each
Item#
SNCF25
Description
Selectable Trigger Cordless Brad Nailer
Item#
RKPIN100
Micro Pinner, air powered
Drives 23 Gauge Headless Micro Pins Up to 1”
Power Tools
• Senco model #: FP10
• Extra power – for use with hard wood
• Easy fastener length adjustment – adjusts to desired fastener length
• Rear exhaust – directs oil and dust away from work surface
• Smooth metal cap & magazine
• Low load alert – visible fastener load with reload indicator
• Unit includes case, fittings, repair tools and tool oil
• Firing Modes: Sequential Actuation
• Pin Length Range: 1/2” to 1”
• Pin Capacity: 170
• Dimensions: 6-3/4”H, 8-7/8”L
• Operating Air Pressure: 70 to 95 psi
• Lip Length: 5/8”
• Hose Fitting: 1/4” NPT
• Weight: 2.35 lb.
Packing & Sold In: Each
Item#
SNFP10
800-BUY-BAER (289-2237)
•
www.baersupply.com
•
Fax: 888-558-2237
V - 27
V Power Tools
23 gauge micropinners & accessories
Micro Pinner/Bradder, air powered
Drives 23 Gauge Microbrads 7/8” to 1-3/8” , Micropins 1/2” to 1”
• Wurth model#: 11191W
• Shoots both micropins and microbrads
• Fastener range 1/2” – 1-3/8”
• Auto adjustable pusher for different fastener lengths
• Lock-out to prevent dry firing
• Removable no mar tip; belt hook
• Steel driver blade; engineered for longer life
• Rear exhaust with muffler
• Swivel adapter for hose connection
• Operating pressure: 60 – 100 psi
Packing & Sold In: Each
Item#
WW11191W
Fastener Types
Item#
Micropins
WWN23050F10
1/2”
WWN23058F
5/8”
WWN23075F10
3/4”
Description
WWN23100F10
1”
Micro Pinner/Bradder
Microbrads
Replacement Items
WWN23088B
7/8”
WW166050
Gasket
WWN23100B
1”
WW166052
Gasket
WWN23119B
1-3/16”
WW280075
Bumper
WWN23138B
1-3/8”
WW300820
CPL Driver Piston
WW622176
O-Ring
WW622178
O-Ring
stapler/nailer
accessories
Repair Kits and Parts
Micro Pinner,
air powered
Drives 23 Gauge Headless Micro Pins
Up to 2”
Power Tools
Size
• Senco model #: FP11
• Extra power – for use with hard wood
• Fast side load magazine with easy open latch
• Rear exhaust – directs oil and dust away from work surface
• Switchable trigger with lock
• Applications include: cabinet, decorative trim and molding
• No-mar pad keeps work surfaces free of marks
• EZ-Clear latch
• Unit includes case, fittings, repair tools and tool oil
• Firing Modes: Contact or Sequential Actuation
• Pin Length range: 1” to 2”
• Pin Capacity: 115
• Dimensions: 9.6” H, 9” L
• Operating Air Pressure: 70 to 95 psi
• Hose Fitting: 1/4” NPT
• Lip Length 1”
• Weight: 2.9 lb.
Packing & Sold In: Each
• Pre-packaged kits allow users themselves to perform common
maintenance and minor repair tasks in air staplers and nailers
• Installation of these kits is extremely easy and no previous tool
repair experience is necessary
• Fully illustrated instructions
are included with each kit
Packing & Sold In: Each
Item#
Description
For Use with Tool
SNEA0075
Driver
SLP20
SNEC0177
Driver
SKS Series
SNGB0304
Feeder Cable Assembly
SKSN, SRS
SNYK0376
Feeder Spring Kit
SFN1, SKS
Item#
SNFP11
V - 28
Würth Baer Supply Company
•
Over 40,000 products in-stock EVERYDAY!
Power Tools V
3” & 5” orbital sanders
orbital sander,
air powered
3” Round Pad,
Non-Vacuum
orbital sander,
air powered
3” Round Pad, Vacuum &
Non-Vacuum
• Mirka model #: MR-3
• Constructed of precision molded composites for
strength and durability
• Features moisture-resistant composite rotors and
premium counterweight bearings
• Can be converted to a vacuum operation
with the addition of a vacuum adapter
• RPM: 12,000
Packing & Sold In: Each
• 3M model #’s: 20314 Non-Vacuum
& 20315 Central Vacuum
• Horsepower: .28
• RPM: 12,000
• Orbital Motion: 3/32”
• Airflow Rate SCFM: 17
• Weight: 1.26 lb.
• Accessories include: clean sanding
hookit pad (20350)
• Dimensions: 3.10” H x 4.90” L x 3” Dia.
Packing & Sold In: Each
MAMR3
Description
Finishing
Sander
Item#
Description
MM20314
Orbital Sander Non-Vacuum
MM20315
Orbital Sander Central Vacuum
Orbital sander,
air powered
5” Round Pad, Non-Vacuum
orbital sander,
air powered
5” Round Pad, Wet Surface
• 3M model #’s: 20317, 20320
• Horsepower: .28
• RPM: 12,000
• Orbital Motion: 3/16” (20317), 3/32” (20320)
• Airflow Rate SCFM: 17
• Weight: 1.65 lb. (20317), 1.59 lb. (20320)
• Accessories included: Stikit Pad (20351)
• Dimensions: 3.26” H x 5.89” L x 5” Dia. (20317),
3.26”H x 5.84”L x 5” Dia. (20320)
Packing & Sold In: Each
• Dynabrade model #: 57908 “Dynabug Model T”
• Unique water feed through-the-pad design allows
use of standard round wet paper with holes; no special
sand paper or hole punch needed
• Fingertip control valve allows
for precise water flow
• RPM: 20,000
• Orbital Motion: 3/16”
• Max Air Flow @
90 PSIG: 17
• Air Hose Connection
Size: 1/4”
• Weight: 1.86 lb.
• Rear Exhaust
• Dimensions: 8”L, 4 ”H
• Accessories included: all hardware for self-siphoning
with 20ft. of water hose, hook-face pad (58086) and
soft interface pad (53978) for contours
Packing & Sold In: Each
Item#
Description
MM20317
3/16” Orbital Sander,
Non-Vacuum
MM20320
3/32” Orbital Sander,
Non-Vacuum
Item#
DY57908
800-BUY-BAER (289-2237)
•
Power Tools
Item#
Description
Orbital Sander Wet Surface
www.baersupply.com
•
Fax: 888-558-2237
V - 29
V Power Tools
5” orbital sanders
Orbital Sander,
electric powered
5” Round Pad, Non-Vacuum
orbital sander,
electric powered
5” Round Pad, Dust Collector
• Porter Cable model #: 7345
• Electronic variable speed dial 2,500 – 6,800 OPM
• Random, swirl free sanding action
• 100% ball bearings
• Power: 120 VAC, 50-60Hz
• Amps: 4.0
• RPM: 2,500 - 6,800
• Weight: 5.5 lb.
• 5” x 5 hole pad
• Abrasive Type: PSA
• Dimensions: 11”L, 10”W, 6”H
• Accessories included: 5”, 5 hole PSA pad, abrasive disc,
side handle, & operating manual
Packing & Sold In: Each
• Bosch model #: 3107DVS
• Includes micro filter dust canister with integrated paper
filter – optimal system for filtering fine dust
• Multi-purpose sander with pad that both orbits and rotates,
duplicating natural hand sanding action and delivering a
smooth, well-blended surface finish
• Trigger with lock-on button
• Power: 120VAC
• Amps: 3.3
• RPM: 4500-13,000
• Orbital Motion: 3/32”
• Weight: 5 lb.
• Dimensions: 10-1/4”L, 7-5/8”H
• Paper Size: 5” x 8 hole hook & loop
• Accessories included: pad wrench 5mm hex, soft backing
pad, micro filter dust canister, & sanding disc
Packing & Sold In: Each
Item#
Description
RK7345
Orbital Finishing Sander Non-Vacuum
Item#
Power Tools
orbital sander,
electric powered
5” Round Pad, Dust Collector
BL3107DVS
BL2-610-906-333
Description
BL3725DEVS
BL2-610-906-333
5” Round Orbital Sander Dust Collector
Replacement dust bags (3pk)
• Festool model #: ETS125 EQ
• ETS 125 has a 5/64”stroke for fine and superfine sanding
• Compact and lightweight enough for extended vertical and
overhead use
• Step-less variable speed control
• Vibration-stop balance design delivers better finish results
• Pad brake – stops the pad quickly
• Integrated dust extraction
• Speed: 6,000 – 14,000 opm
• Sanding Stroke: 5/64”
• Weight: 2.4 lb.
• Power: 120VAC
• Amps: 1.67
• Watts: 200
• Accessories included: abrasive sample pack, filter bag
with holder, plug-it power cord, Stickfix sanding pad soft,
In Systainer 2 (445434)
Packing & Sold In: Each
Item#
FJ571610
V - 30
Würth Baer Supply Company
Replacement Dust Bags (3 Pack)
Orbital Sander,
Electric Powered
5” Round Pad, Dust Collector
• Bosch model #: 3725DEVS
• Includes micro filter dust canister with integrated paper
filter – optimal system for filtering fine dust
• Multi-purpose sander with pad that both orbits and
rotates, duplicating natural hand sanding action and
delivering a smooth, well-blended surface finish
• Trigger with lock-on button
• Power: 120VAC
• Amps: 3.3
• RPM: 4500-12,000
• Orbital Motion: 3/32”
• Weight: 5.1 lb.
• Dimensions: 12”L, 5-1/4”H
• Paper Size: 5” x 8 hole hook & loop
• Accessories included: pad wrench 5mm hex, soft
backing pad, micro filter dust canister, & sanding disc
Packing & Sold In: Each
Item#
Description
5” Round Orbital Sander Dust Collector
•
Description
Orbital Sander Dust Collector
Over 40,000 products in-stock EVERYDAY!
Power Tools V
5” & 6” orbital sanders
Orbital Sander,
Electric Powered
5” Round Pad Dual Mode, Dust Collector
Orbital Sander,
air powered
5” & 6” Round Pad, Non-Vacuum
• Festool model #: RO 125 FEQ
• Dual-mode sanding, aggressive mode for rapid stock
removal or polishing and random orbital mode for fine sanding
• MMC Electronics provides soft-start, step-less variable speed
control, constant speed under load and thermal and overload
protection
• Edge protector – protective bumper guard allows you to sand
right up to adjacent surfaces
• Pad brake – stops the pad quickly
• Stickfix (hook and loop) sanding system for fast replacement
of sanding pad and abrasives
• Integrated dust extraction
• Speed eccentric motion: 3,000 – 6,000 opm
• Speed rotary motion: 300-600 rpm
• Sanding Stroke: 9/64”
• Weight: 4.4 lb.
• Power: 120VAC
• Amps: 4.2
• Watts: 500
• Accessories included: abrasive sample pack, auxiliary side
handle, edge protector, Plug-it power cord, Stickfix sanding
pad – 5”, In Systainer 2 (445434)
Packing & Sold In: Each
• Dynabrade model #’s: 69020, 69035, 69025, 69040
“Dynorbital Silver Supreme”
• Comfort Platform provides additional hand and wrist support
• Throttle lever recesses into housing grip when depressed,
eliminating pressure-point on operator’s palm
• Low sound levels
• Optional vacuum conversion kits available to convert into
self-generated or central vacuum tool
• Horsepower: .26
• RPM: 12,000
• Orbital Motion: 3/16” diameter (69020, 69025) or 3/32” (69035,
69040)
• Weight: 1.8 lb. (69020, 69025, 69040), or 1.7 lb. (69035)
• Max Air Flow @ 90 PSIG: 16
• Air Hose Connection Size: 1/4”
• Tool Spindle Thread: 5/16”-24 Female
• Rear Exhaust
• Dimensions: 6.5”L, 3.5”H (69020, 69035) or
7”L, 3.5”H (69025, 69040)
• Accessories included: low profile sanding pad
Packing & Sold In: Each
Item#
FJ571536
Description
Dual Mode Orbital Sander Dust Collector
Item#
Description
DY69020
5” Round 3/16” Orbital Sander Non-Vacuum
DY69035
5” Round 3/32” Orbital Sander Non-Vacuum
DY69025
6” Round 3/16” Orbital Sander Non-Vacuum
DY69040
6” Round 3/32” Orbital Sander Non-Vacuum
• Dynabrade model #’s: 56815 and 56826 “Dynorbital Supreme”
• Optional vacuum conversion kits available to convert into self-generated or central vacuum tool
• Rotor utilizes five blades and produces more useable power; Composite rotor is stronger and has better lubricating
qualities, enabling blades to last longer
• Horsepower: .28
• RPM: 12,000
Item#
Description
• Orbital Motion: 3/16”
DY56815
5” Round Orbital Sander Non-Vacuum
• Max Air Flow @ 90 PSIG: 18
DY56826
6” Round Orbital Sander Non-Vacuum
• Air Hose Connection Size: 1/4”
• Weight: 2.04 lb. (56815) or 2.06 lb. (56826)
• Tool Spindle Thread: 5/16”-24 Female
• Rear Exhaust
• Dimensions: 6-1/2”L, 3-5/8”H (56815) or 7”L, 3-1/2” H(56826)
• Accessories included: low profile sanding pad
Packing & Sold In: Each
800-BUY-BAER (289-2237)
•
www.baersupply.com
•
Fax: 888-558-2237
Power Tools
orbital sander, air powered
5” & 6” Round Pad, Non-Vacuum
V - 31
V Power Tools
5” & 6” orbital sanders
orbital & rotary sander, air powered
5” & 6” Round Pad, Non-Vacuum
• Dynabrade model #’s: Dynalocke 58430 and 58435
• DynaLocke is truly two-tools-in-one, easily changing from a rotary
Disc Sander to Random Orbital Sander with the flip of a switch
• Switch is recessed within tool grip to prevent accidental engaging
• Utilized for leveling glue seams on Corian and other solid surfaces
• Includes low profile, premium urethane, hook-face sanding pad
• 3/16” orbit for general sanding
• Tool Spindle Thread: 5/16” – 24 Female
Item#
Description
DY58430
5” Orbital Sander Non-Vacuum
DY58435
6” Orbital Sander Non-Vacuum
• Horsepower: .45
• RPM: 12,000
• Orbit Motion: 3/16”
• Max Air Flow @ 90PSIG: 23
• Air Hose Connection Size: 1/4”
• Rear Exhaust
• Weight: 2.86 lb. (58430) or
2.93 lb. (58435)
• Dimensions: 11-1/6” L, 5-1/8” H
Packing & Sold In: Each
Orbital SanderS, Air Powered
5” & 6” Round Pad, Vacuum & Non-Vacuum
Power Tools
• Floating rotor utilizes five blades, producing more usable power
• High-strength, composite rotor has better lubricating qualities, allowing blades to last longer
• Throttle lever recesses into housing grip when depressed eliminating pressure-point on operator’s palm
• Muffling system reduces exhaust sound levels
• Speed Control allows thumb-control regulating of tool speed
• Lighter air-motor assembly, ideal for vertical and overhead sanding applications
• Optional vacuum conversion kits are available to easily convert non-vacuum tool to self-generated
vacuum tool or central vacuum tool
• 3/8” orbit for aggressive sanding, 3/16” orbit for general sanding, and 3/32” for fine sanding
• Drop-In Motor available (sold separately) to reduce costly down-time
• Tool Spindle Thread: 5/16” – 24 Female
• Horsepower: .25
• RPM: 12,000
Dimension
Pad Orbit
• Max Air Flow @ 90PSIG: 14
Item#
Weight Vacuum Type
(Length x
Size Motion
• Air Hose Connection Size: 1/4”
Height)
• Rear Exhaust
DY59005
5”
3/8”
1.51 lb.
None
6-1/2” x 3-1/2”
NOTE: *SPECIAL ORDER.
DY59020
5”
3/16”
1.43 lb.
None
6-1/2” x 3-1/2”
Packing & Sold In: Each
A DY59035
5”
3/32”
1.39 lb.
None
6-1/2” x 3-1/2”
B
B
C
V - 32
C
A
Drop-In Motor
Asembly
DY59453*
DY59454*
DY59455*
DY59025
6”
3/16”
1.45 lb.
None
7” x 3-1/2”
DY59457*
DY59040
6”
3/32”
1.41 lb.
None
7” x 3-1/2”
DY59458*
DY59023
5”
3/16”
1.49 lb.
Self-Generated
8-1/2” x 3-1/2”
DY59454*
DY59038
5”
3/32”
1.46 lb.
Self-Generated
8-1/2” x 3-1/2”
DY59455*
DY59028
6”
3/16”
1.51 lb.
Self-Generated
9” x 3-1/2”
DY59457*
DY59043
6”
3/32”
1.46 lb.
Self-Generated
9” x 3-1/2”
DY59458*
DY59024
5”
3/16”
1.47 lb.
Central
7-1/4” x 3-1/2”
DY59454*
DY59039
5”
3/32”
1.43 lb.
Central
7-1/4” x 3-1/2”
DY59455*
DY59029
6”
3/16”
1.49 lb.
Central
7-3/4” x 3-1/2”
DY59457*
DY59044
6”
3/32”
1.44 lb.
Central
7-3/4” x 3-1/2”
DY59458*
Würth Baer Supply Company
•
Over 40,000 products in-stock EVERYDAY!
Power Tools V
5” & 6” orbital sanders
Orbital sanderS, air powered
5” & 6” Round Pad, Vacuum & Non-Vacuum
• Self-Generated vacuum models are designed to work with 3M’s proprietary self–contained
dust collection system to trap and contain airborne particles during the finishing process
• Self-Generated vacuum models are compatible with conventional filter bags
• Accessories for self-generated vacuum models include: clean sanding hookit pad, filter bag
adapter, and clean sanding filter bag
• Accessories for non-vacuum and central vacuum models include: clean sanding Hookit pad
• 5/16” orbit for aggressive sanding, 3/16” orbit for general sanding, and 3/32” for fine sanding
• Horsepower: .28
• RPM: 12,000
• Airflow Rate SCFM: 17
Packing & Sold In: Each
Item#
Pad Size Orbit Motion
Weight
Vacuum Type
Dimensions
Length x Height
MM20317
5”
3/16”
1.65 lb.
None
5.89” x 3.26”
MM20320
5”
3/32
1.59 lb.
None
5.84” x 3.26”
MM20318
5”
3/16”
1.79 lb.
Central
5.91” x 3.33”
MM20321
5”
3/32”
1.72 lb.
Central
5.86” x 3.33”
MM20319
5”
3/16”
1.83 lb.
Self-Generated
6.12” x 3.33”
MM20324
6”
5/16”
1.78 lb.
None
6.39” x 3.26”
MM20325
6”
3/16”
1.74 lb.
None
6.39” x 3.26”
MM20328
6”
3/32”
1.68 lb.
None
6.34” x 3.26”
MM20213
6”
5/16”
1.90 lb.
Central
6.35” x 3.33”
MM20326
6”
3/16”
1.90 lb.
Central
6.35” x 3.33”
MM20208
6”
5/16”
1.96 lb.
Self-Generated
6.47” x 3.33”
MM20327
6”
3/16”
1.96 lb.
Self-Generated
6.47” x 3.33”
MM20329
6”
3/32”
1.83 lb.
Self-Generated
6.31” x 3.33”
5” Round
6” Round
• Fein model #: MSF 636-1
• Perfect sanding results in finishing of high quality paints, GFRP, wood, solid surface, plastic or metal
• Collects up to 98% of the sanding dust when used in conjunction with a Fein Turbo dust extractor
• Input: 380 Watts
• Output: 190 Watts
• Stroke: 5/16”
• RPM: 7,500
• Weight: 3.7 lb.
• Connector thread backing
pad: 5/16”-24 UNF
• Hose connection: 1-1/4”
• Pad Size/Paper Type: 6”, 8 hole, hook and loop
• Accessories included: 6” eccentric head, backing pad, protective suction hood, and wrench set
Packing & Sold In: Each
Item#
FI636RO6
Power Tools
orbital sander, electric powered
6” Round Pad, Vacuum
Description
Orbital Sander Vacuum
800-BUY-BAER (289-2237)
•
www.baersupply.com
•
Fax: 888-558-2237
V - 33
V Power Tools
6” orbital sanders
orbital sander, electric powered
6” Round Pad, Dust Collector
• Bosch model #: 3727DEVS
• Includes micro filter dust canister with integrated paper filter – optimal system for filtering fine dust
• Multi-purpose sander with pad that both orbits and rotates, duplicating natural hand sanding action and
delivering a smooth, well-blended surface finish
• Trigger with lock-on button
• Power: 120VAC
• Amps: 3.3
• RPM: 4500-12,000
• Orbital Motion: 5/64”
• Weight: 5.2 lb.
• Dimensions: 12”L, 5 1/4”H
• Paper Size: 6” x 6 hole hook & loop
• Accessories included: pad wrench 5mm hex, soft backing pad, micro filter dust canister, & sanding disc
Packing & Sold In: Each
Item#
Description
BL3727DEVS
BL2-610-906-333
6” Round Orbital Sander Dust Collector
Replacement Dust Bags (3pk)
Power Tools
orbital sander,electric powered
6” Round Pad, Dust Collector
• Festool model #’s: ETS150/3 and ETS150/5
• ETS 150/3 has a short 1/8” stroke for superfine sanding
• ETS 150/5 has a 3/16” stroke for light or intermediate sanding
• MMC Electronics provides soft-start, step-less variable speed control, constant speed under load,
and thermal and overload protection
• Vibration-stop balance design delivers better finish results
• Pad brake – stops the pad quickly
• Stickfix (hook and loop) sanding system for fast replacement of sanding pad and abrasives
• Lockable switch
• Integrated dust extraction
• Speed: 6,000 – 10,500 opm
• Sanding Stroke: 1/8”(ETS150/3) or 3/16” (ETS150/5)
• Weight: 4 lb.
• Power: 120VAC
• Amps: 2.6
• Watts: 310
• Accessories included: abrasive sample pack, filter bag with holder, plug-it power cord, Stickfix sanding
pad soft, In Systainer 3 (445596)
Packing & Sold In: Each
Item#
V - 34
Description
FJ571540
ETS 150/3 Orbital Sander Dust Collector
FJ571541
ETS 150/5 Orbital Sander Dust Collector
Würth Baer Supply Company
•
Over 40,000 products in-stock EVERYDAY!
Power Tools V
6” & 8” orbital sanders
Orbital Sander, Electric Powered
6” Round Pad Dual Mode Dust Collector
• Festool model #: RO 150 FEQ
• Dual-mode sanding, aggressive mode for rapid stock removal or polishing and random orbital mode for fine sanding
• MMC Electronics provides soft-start, step-less variable speed control, constant speed under load, and thermal and overload protection
• Edge protector – protective bumper guard allows you to sand right up to adjacent surfaces
• Enclosed gear unit – prevents dust from entering the gear and bearing unit
• Detachable extraction channel – streamlining the tool for tasks such as polishing
• Stickfix (hook and loop) sanding system for fast replacement of sanding pad and abrasives
• Integrated dust extraction
• Speed eccentric motion: 3,300 – 6,800 opm
• Speed rotary motion: 320-660 rpm
• Sanding Stroke: 3/16”
• Weight: 5 lb.
• Power: 120VAC
• Amps: 6
• Watts: 720
• Accessories included: abrasive sample pack, auxiliary side handle, edge protector,
Plug-it power cord, removable dust channel, Stickfix sanding pad – 6”, In Systainer 3 (445596)
Packing & Sold In: Each
Item#
FJ571594
Description
Dual Mode Orbital Sander Dust Collector
• Dynabrade model #: 58414 Two-Hand Central Vacuum
• Long handle provides excellent comfort and control especially when working on vertical sides of work piece
• Horsepower: .45
• RPM: 10,000
• Orbital Motion: 3/16”
• Max Air Flow @ 90 PSIG: 23
• Air Hose Connection Size: 1/4”
• Weight: 3.75 lb.
• Rear Exhaust
• 3/8” (10 mm) diameter orbit for general sanding
• 2” outside diameter vacuum port
• Pads have 5/16”-24 male spindle
• Dimensions: 12 1/2”L, 5 5/8”H
• Accessories included: premium urethane weight-mated sanding pad
Packing & Sold In: Each
Item#
DY58414
Description
Power Tools
Orbital Sander, air powered
8” Round Pad, Vacuum
8” Round Orbital Sander Central Vacuum
800-BUY-BAER (289-2237)
•
www.baersupply.com
•
Fax: 888-558-2237
V - 35
V Power Tools
orbital sanders
orbital sander,
electric powered
8” Round Pad, Vacuum
• Fein model #: 1200 E
• Covers 78% more surface area and sands 54% faster
than a standard 6” sander
• Collects up to 98% of the sanding dust when used in conjunction
with a Fein Turbo dust extractor
• Self-start lock to prevent injuries
• Speed control to ensure ideal performance for all applications
• Input: 1200 Watts
• Output: 750 Watts
• Stroke: 5/16”
• RPM: 0 – 7,000
• Weight: 7.7 lb.
• Connection 1-1/4”
• Dimensions: 12-5/16”L, 5-3/8”H
• Pad Size/Paper Type: 8”, 16 hole, hook and loop
• Accessories included: protective suction hood, and handle
Packing & Sold In: Each
Item#
Description
FI1200
Orbital Sander Vacuum
FI1200SP
Replacement Pad
Orbital Sander/
Polisher, electric
powered
11” Round Pad
• The GEM sander completely stable, with no tendency
to “get away” from the operator.
• 11” drive pad reduces labor by 1/2 or more
• Heavy duty machine runs at 1700 “orbits” per minute without
the possibility of creating the swirl marks associated with
high-speed rotary buffers
• Motor: 110v/220v , 2.3 AMPS @ 110v
• Housing: heavy-duty aluminum
• Weight: 18 lb.
• Height: 10”
• Paper Type: 3M Hookit™ II, Trizact™,
Scotch-Brite™
• Orbits RPM: 1,700
Packing: Each
GSBWH
Item#
Description
GSBWH
Sander/Polisher
GSBWHS
Sander/Polisher with Shroud
Power Tools
Orbital Sander, Electric Powered
4” x 6” Triangular Pad, Dust Collector
• Festool model #: DTS 400 EQ
• Delta shaped pad – convex sides for sanding edges and rabbets, and a triangular point
for accessing corners
• Orbital sanding motion
• Compact design and low weight for extended vertical and overhead use
• Step-less variable speed control
• Vibration-stop balance design delivers better finish results
• Stickfix (hook and loop) sanding system for fast replacement of sanding pad and abrasives
• Integrated dust extraction
• Speed: 6,000 – 14,000 opm
• Sanding Stroke: 5/64”
• Weight: 2.4 lb.
• Power: 120VAC
• Amps: 1.67
• Watts: 200
• Accessories included: filter bag with holder, plug-it power cord, stickfix sanding pad, In Systainer 2 (445434)
Packing & Sold In: Each
Item#
Description
FJ567825
V - 36
Orbital Sander Dust Collector
Würth Baer Supply Company
•
Over 40,000 products in-stock EVERYDAY!
Power Tools V
rectangular orbital sanders
Orbital sander,
air powered
3” x 4” Rectangular Pad, Vacuum
• Dynabrade model #’s: 57400 & 57401 Dynaline Sanders
• Quality construction pad is weight-mated to tool for
low vibration, smooth operation and superior finishes
• Horsepower: .30
• SPM: 2,400
• Stroke Length: 3/8”
• Max Air Flow @ 90 PSIG: 18
• Air Hose Connection Size: 1/4”
• Weight: 2.58 lb.
• Rear Exhaust
• Dimensions: 7” L, 3-3/4” H
• Accessories included: 2-3/4” x 8” sanding pad (57454)
Packing & Sold In: Each
Item#
Description
• 3M model #’s: 20430 Central-Vacuum &
20431 Self-Generated Vacuum
• System creates a high efficiency dust
collection system when used with
3M clean sanding abrasives
• Horsepower: .24
• RPM: 10,000
• Orbital Motion: 3/16”
• Airflow Rate SCFM: 17
• Weight: 1.53 lb. (20430) & 1.58 lb. (20431)
• Model 20431 accessories include: clean sanding hookit pad (20435),
filter bag adapter and clean sanding filter bag
• Model 20430 accessories include: clean sanding hookit pad (20435)
• Dimensions: 3.28:” H x 5.48” L (20430), 3.28”H x 5.6”L (20431)
Packing & Sold In: Each
Item#
DY57400
Orbital Sander Non-Vacuum
DY57401
Orbital Sander Self-Generated Vacuum
Description
MM20430
Orbital Sander Central-Vacuum
MM20431
Orbital Sander Self-Generated Vacuum
orbital sander,
air powered
3” x 4-1/2” Rectangular Pad,
Vacuum & Non-Vacuum
orbital sander,
Air powered
3-2/3” x 9” Rectangular Pad,
Non-Vacuum
• Dynabrade model#’s: 58500 and 58505 “Dynabug II”
• Engineered and tested to ensure less tool vibration than
competitive models
• Lighter tool weight minimizes
hand and arm fatigue
• Horsepower: .15
• RPM: 10,000
• Orbital Motion: 3/32” for ultra
fine sanding
• Weight: 1.75 lb.
• Max Air Flow @ 90 PSGI: 13
• Air Hose Connection Size: 1/4”
• Central Vacuum model has 1”
outside diameter central vacuum port
• Dynabrade model #: 57810 “Dynabug”
• Excellent for sanding restricted areas and vertical sides
• Tools have heavy-duty clips to accept traditional 3-2/3” x 9”
abrasive sheets (rolls also available on page Q-18)
• Horsepower: .24
• RPM: 10,000
• Orbital Motion: 3/32”
• Max Air Flow @ 90 PSIG: 16
• Air Hose Connection Size: 1/4”
• Weight: 2.66 lb.
• Rear Exhaust
• Dimensions: 7 1/4”L, 4-1/4”H
• Accessories included: 3-2/3” x 9” sanding pad
(57850) for PSA abrasives
Packing & Sold In: Each
Item#
Description
Item#
DY58500
Orbital Sander Non-Vacuum
DY58505
Orbital Sander with Central Vacuum
800-BUY-BAER (289-2237)
•
DY57810
Power Tools
orbital sander,
air powered
2-3/4” x 8” Rectangular Pad,
Non-Vacuum & Vacuum
Description
Orbital Sander Non-Vacuum
www.baersupply.com
•
Fax: 888-558-2237
V - 37
V Power Tools
rectangular orbital sanders
orbital sander,
air powered
4” x 4-5/16” Rectangular Pad,
Non-Vacuum
orbital Sander,
air powered
4” x 4-3/8” Rectangular Pad,
Non-Vacuum
• Dynabrade model #: 57920 “Model T”
• Lightweight (only 1 lb.) palm style sander has ergonomic
design that features low profile grip for greater operator
comfort and control
• Unit can be run with as little as a 3 HP compressor
• Horsepower: .15
• RPM: 20,000
• Orbital Motion: 3/32” for ultra fine sanding
• Weight: 1.0 lb.
• Max Air Flow @ 90 PSGI: 9
• Air Horse Connection Size: 1/4”
• Central Vacuum model has 1” outside
diameter central vacuum port
Packing & Sold In: Each
• Nitto Kohki model #: FS-100C “Free Sander”
• Lightweight design with minimal vibration
• High output and low air consumption motors produce high
speed orbits for swirl-free finishes
• RPM: 20,000
• Orbital Motion: 1/16” diameter
• Weight: 1.1 lb.
• Max Air Flow: 85 PSI
• Air Consumption: 7.1 CFM
• Paper Size: 4-1/2” x 5-1/2”
• Accessories included: hose assembly,
sanding paper, threaded adapter PT 1/4” x NPT 1/4”
Packing & Sold In: Each
Item#
Item#
Power Tools
DY57920
Description
NOFS100C
Orbital Finishing Sander Non-Vacuum
Orbital Sander Non-Vacuum
NOTA9A367
Replacement Pad, 4” x 4-3/8”
orbital sander,
air powered
Two Rectangular Pads
3-3/8” x 7-1/4” & 3” x 6-1/4”, Non-Vacuum
Orbital Sander,
Electric Powered
3-5/32”x 5-1/4” Rectangular Pad,
Dust Collector
• National Detroit model #: 300A
• For straight-line twin pad sanding & rubbing, nothing
beats the sander for productivity
• Recommended applications: wet sanding, removing orange
peel, polishing, rubbing & general sanding
• Max No Load: 2,500 rpm
• Air Pressure: 60-100 psi
• Air Consumption: 7CFM (2.3 avg SCFM)
• Stroke: 1/2”
• Air Hose Connection Size: 1/4” N.P.
thread
• Weight: 6 lb.
• Paper size: 3-3/8” x 7-1/4”
Packing & Sold In: Each
• Festool model #: RTS 400 EQ
• Rectangular shaped pad – narrow profile allows for
sanding on edges and frame members
• Orbital sanding motion
• Compact design and low weight for extended vertical and
overhead use
• Step-less variable speed control
• Vibration-stop balance design delivers better finish results
• Stickfix (hook and loop) sanding system for fast replacement of
sanding pad and abrasives
• Integrated dust extraction
• Speed: 6,000 – 14,000 opm
• Sanding Stroke: 5/64”
• Weight: 2.4 lb.
• Power: 120VAC
• Amps: 1.67
• Watts: 200
• Accessories included: filter bag with holder, plug-it power cord,
stickfix sanding pad, In Systainer 1 (445433)
Packing & Sold In: Each
Item#
ND300A
Description
Orbital 2 Rectangular Pads Sander
Non-Vacuum
Item#
FJ567817
V - 38
Description
Würth Baer Supply Company
•
Description
Orbital Sander Dust Collector
Over 40,000 products in-stock EVERYDAY!
Power Tools V
rectangular orbital sanders & accessories
orbital sander, electric powered
4-1/2” x 4” Rectangular Pad
• Bosch model #: 1297DK
• 2.0 Amp Motor, 12,000 OPM — Ensures fast, smooth results on all surfaces
• SheetLoc™ Sandpaper Attachment System - Pulls regular sandpaper flat and tight, giving it the benefits of adhesive “stick-on” paper - fast
and easy installation; efficient, uniform sanding, and longer paper life, but without stick-on paper’s nearly twice-the-price cost
• Rubberized paper clamps, for firm, no-slip grip
• Also accepts stick-on paper
• Through-the-pad dust collection, for cleaner workspace
• Bosch Microfiler Dust Canister with integrated paper filter, optimal filtering system of fine dust
• Captures particles as small as a 1/2 micron
• Flush sanding ability, sands close to vertical surfaces on three sides
• Dust sealed rocker switch, convenient, easy off and on, keeps dust out
Item#
• 3-Point counterbalance, low vibration for maximum comfort
BL1297DK
• Ergonomic, soft grip top, for comfort and control
• All ball bearing construction, for long life and smooth operation
• Includes: punchplate (2610920650), (1) sandpaper sheet , versatile carrying bag (2610922842) and microfilter dust canister (RS024)
Packing & Sold In: Each
orbital Sander,
electric powered
4-1/8” x 4-1/2” Rectangular Pad,
Non-Vacuum
Orbital Sander
Accessories
Replacement Pad for
RK330 Sander
Item#
Description
RK330
Orbital Finishing Non-Vacuum
plug it power cord
• 18 gauge power cord, 13’ long
NOTE: For use with ETS 125 EQ and ETS 150 only.
Packing & Sold In: Each
• For use with Porter Cable 330 sander
• For adhesive or non-adhesive paper
• Dimensions: 4-1/2” x 4-1/8”
• Mounts using existing screws on sander for easy installation
Packing & Sold In: Each
Item#
RK13597
Description
Replacement Pad for
RK330
orbital sander
accessories
Muffler Assemblies
• Reduces sound levels of non-vacuum Dynorbital sanders to
as low as 73 dB(A)
• Lightweight Kit is for older model Dynorbital sanders
• Dynorbital Supreme Kit is for all current models
Packing & Sold In: Each
Item#
Kit Type
Item#
DY56079
Lightweight
FJ490649
DY57112
Supreme
800-BUY-BAER (289-2237)
•
Power Tools
• Porter Cable model #: 330 “Speed-Bloc” Quarter-Sheet
Finishing Sander
• Comfortable, easy-grip housing for hours of use without fatigue
• Rubber posts isolate your hand from vibration while
enabling full sanding action
• Power: 120 VAC, 25-60Hz
• Amps: 1.2
• RPM: 14,000
• Orbital Motion: 5/64” diameter
• Weight: 4 lb.
• Accepts pre-cut adhesive or self cut
standard paper with metal stamp
• Paper Size: 1/4” sheet
• Dimensions: 4.5” L x 5” W x 4.5” H
• Accessories included: abrasive sheet,
clamp tool and operating manual
Packing & Sold In: Each
www.baersupply.com
•
Fax: 888-558-2237
V - 39
V Power Tools
dust collection accessories
orbital sander
accessories
Dust Collection System
orbital sander
accessories
Clean Sanding Filter Bag
• System includes 1” (25 mm) Dia. x 6’ (1.8 m) Long 50682
flex-hose and 50683 bag with with hook-face closure
Packing & Sold In: Each
• Designed to use with self-generated vacuum system sanders
fitted with threaded or press-fit exhaust air attachments
• Eliminates the need for vacuum hose which improves
operator ease of use
• HEPA rated
Packing & Sold In: Each
Item#
Description
DY50617
Flex Hose System
DY50683
Repl Cloth Dust Bag
Item#
MM20452
orbital sander
accessories
Micro Filter Dust Cannister
• Bosch model #: RS026
• For Bosch 3107DVS, 3725DVS, 3725DEVS,
3727DVS, 3727DEVS, 1293D
• Integrated paper filter traps particles as
small as a 1/2 micron in dia.
• Durable and easy to empty and clean
Packing & Sold In: Each
Orbital Sander
Accessories
Filter Bag
Adapter
• Used to attach 3M clean sanding filter bag to self
generating vacuum orbital and random orbital sanders
• 1” external hose thread which attaches to 3M sander and
1” inside diameter tubing that attaches to 3M clean sanding
filter bag
Item#
Packing and Sold In: Each
MM20453
Item#
BLRS026
Turbo Dust Bag Set
For ETS150 Random
Orbit Sanders
• Paper dust bag for dust extraction and one plastic holder
NOTE: For FJ571540 (ETS 150/3) and FJ571541 (ETS 150/5 EQ) only.
Packing & Sold In: 1 pack of 5 bags
Item#
• Disposable dust bags for self-generated
vacuum Mirka MR orbital sanders
Packing: 10 per box.
Sold in: Full box quantities only.
Power Tools
FJ489631
Turbo Dust Bags
For ETS 125 EQ &
ETS 150 Random Orbit Sanders
Item#
MA9320
Box Qty
FJ489128
5
FJ487779
5
FJ489128
Item#
DY95524
Würth Baer Supply Company
Disposable Dust Bags
for Mirka MR Sanders
• Includes assorted parts to maintain Dynorbital sander
motors in tip-top shape
• Lightweight Kit is for older model
Dynorbital sanders
• Dynorbital Supreme Kit is for all
current models
Packing & Sold In: Each
FJ487779
V - 40
Description
orbital sander
accessories
Dynorbital Tune-Up Kit
• Paper dust bag for dust extraction
NOTE: FJ489128 for FJ571610 (ETS 125 EQ) only.
FJ487779 for FJ571540 (ETS 150/3) and
FJ571541 (ETS 150/5 EQ) only.
Packing & Sold In:
1 pack of 5 bags
Item#
Orbital Sander
Accessories
Disposable Dust Bags For
MR Sanders
•
Kit Type
Lightweight
Supreme
Over 40,000 products
in-stock EVERYDAY!
DY96024
Power Tools V
orbital sander accessories
Orbital Sander
Accessories
Make Your Own Pad Kit
Orbital Sander
Accessories
Fein Triangular Hook & Loop
Sanding Pad
• Create custom profile pads
• Ideal for use with Dynaline
in-line finishing sanders
(DY57400, DY57401)
• Contents allow for making
one pad per kit
Packing & Sold In: Each
• For use with Fein Multimaster sander
• Hook and Loop allows for grit switching
in the middle of job
• Aluminum backed pad
Packing: 2 per pack.
Sold In: Full packs only.
Item#
Description
FI636T-HLP
DY57480
Triangle Hook & Loop Sanding Pad
Orbital Sander
Accessories
Festool Do It Yourself Sanding Pad Kit
Orbital Sander
Accessories
Festool Triangle Stickfix
Sanding Pads
• For use with Festool DX93E only
A - FJ488715
• 3-11/16” (93mm)
• Snap Stud connector (2 pieces) for quick pad changes
• Stickfix hard pads help maintain a crisp
and flat surface, especially on edges
• Stickfix soft pads are high temperature
resistant for heavy duty applications
Packing: Pack of 2 each.
Sold In: Full packs only.
B - FJ488716
Item#
Description
A
FJ488715
Triangle Stickfix Soft Pad
B
FJ488716
Triangle Stickfix Hard Pad
Orbital Sander
Accessories
Mirka 2-7/8” Soft Interface Pad
• Interface pad is used in combination with
hook and loop sanding disc for sanding
rounded surfaces and contours
• Interface pad is placed between the backup pad and
the abrasive disc
• 3/4” thickness, 2-7/8” diameter
Packing and Sold in: Each
Item#
MA1022SF
Description
• For use with Festool LS 130 EQ only
• Create your own sanding pad to match custom profiles
Packing & Sold In: Each
Item#
FJ490780
Description
Do It Yourself Sanding Pad Kit
Orbital Sander
Accessories
Abranet 5” & 6” Grip
Faced Interface Pads
• Interface pad is used in combination
with hook and loop sanding disc for
sanding rounded surfaces and contours
• Interface pad is placed between the
backup pad and the abrasive disc
• 1/2” thickness, 5” and 6” diameter
Packing: 5 per box, 5 boxes per carton.
Sold in: Full box quantity only.
Discount available for full carton orders.
Item#
Description
A
MA9155
5” Abranet Interface Pad
B
MA9166
6” Abranet Interface Pad
A - MA9155
Power Tools
Item#
B - MA9166
Grip Soft Faced Interface Pad
800-BUY-BAER (289-2237)
•
www.baersupply.com
•
Fax: 888-558-2237
V - 41
V Power Tools
orbital sander accessories
Orbital Sander
Accessories
Mirka 6” Interface Pad
Orbital Sander
Accessories
Festool 5” & 6” Interface Pads
• Interface pad is used in combination
with hook and loop sanding disc for
sanding rounded surfaces and contours
• Interface pad is placed between the
backup pad and the abrasive disc
• 1/2” thickness, 6” diameter
Packing: 5 per box.
Sold in: Both broken and full box quantities.
Discount available for full box orders.
• 5” for use with Festool ETS 125 EQ only
• 6” for use with Festool ETS 150/3 EQ &
ETS 150/5 EQ only
• Interface pad for super fine abrasives – soft
• For profiles and contours
• Allows abrasive to float easier on
the surface for smoother results
Packing & Sold In: Each
Item#
MA1066
Orbital Sander
Accessories
Festool 6” Soft Felt Pad
6” Soft Felt Pad
Power Tools
• 5” for use with Festool RO 125 FEQ only
• 6” for use with Festool RO 150 FEQ only
• Stickfix polishing pad
• Thinner and harder than sanding pads
• For use on polishing media such as felts,
sponges and sheepskin
Packing & Sold In: Each
V - 42
FJ492128
5” Stickfix Polishing Pad
B
FJ493914
6” Stickfix Polishing Pad
Würth Baer Supply Company
Description
Diameter
Fits Tool
Qty
FJ493865
Fine
5”
RO 125 FEQ
Pack
of 5
FJ493866
Fine
6”
RO 150 FEQ
1
FJ493845
Coarse
6”
RO 150 FEQ
1
RO 150 FEQ
Pack
of 5
Coarse
6”
Orbital Sander
Accessories
5” Low Profile Stikit Pad
• For use with 5” Stikit discs
• Has a blunt 15 degree taper on the pad edge for durability
and improved leveling of sanded surface
• Blue face pad allows for easy disc
removal in low heat applications
• Size: 5” x 3/8”
• Thread: 5/16”-24 external
Packing: As shown below.
Sold In: Both broken and full box
quantities. Discount available for full box orders.
A - FJ492128
A
6” Interface Pad
FJ488346
A - FJ493914
Description
5” Interface Pad
FJ492212
Item#
Orbital Sander
Accessories
Festool Stickfix 5” & 6” Polishing Pads
Item#
FJ492271
• For use with Festool RO 125 FEQ and
RO 150 FEQ only
• Coarse polishing sponge for heavily weathered surfaces
• Fine polishing sponge for lightly weathered surfaces
• Coarse sponge pad dimensions: 6” diameter, 20mm high
• Fine sponge pad dimensions: 5”or 6” diameter, 30mm high
Packing & Sold In: As shown below.
Description
FJ488347
Description
Orbital Sander
Accessories
Festool 5” & 6” Polishing
Sponge Pads
• For use with Festool RO 150 FEQ only
• Soft felt pad for pre-polishing
new paints, finishes, and plastics
for wood
• 6” diameter
Packing: Pack of 5 each.
Sold In: Full packs only.
Item#
Item#
•
Item#
Color
RPM
Box Qty
OverMM5555
40,000Blue
products
12,000in-stock
10 EVERYDAY!
Power Tools V
orbital sander accessories
Orbital Sander
Accessories
5” Sander Pads
• 5” diameter non-vacuum disc pad,
hook-face, medium nap
• 5/8” thickness urethane, soft density,
5/16”-24 male thread
• Maximum operating speed: 13,000 RPM
• Ideal for use with scalloped edge abrasives
• For use with random orbit sanders, 5/16” -24 female thread
Packing & Sold In: Each
Item#
DY57792
Description
Orbital Sander
Accessories
Bosch 5” x 8 Hole
Sander Disc Pads
Packing & Sold In: Each
Item#
Description
Fits Tools
BLRS030
5” x 8 Hole, Contour,
Hook & Loop
Extra Soft
BL1295D, BL3107DVS,
BL3725DVS
BLRS031
5” x 8 Hole, Standard,
Hook & Loop
BL1295D, BL3107DVS,
BL3725DVS
5” Replacement Pads for Non-Vaccum
Orbital Sanders
Orbital Sander Accessories
5” & 6” Sanding Pads
• 5/16” – 24 Male thread
• 13,000 RPM maximum operating speed
Packing & Sold In: Each
Item#
Type
Holes
Thickness
Density
5” Vinyl Face Pads for PSA Discs
Item#
Type
Holes
Thickness
Density
6” Vinyl Face Pads for PSA Discs
DY56102
Non-Vac
-
3/8”
Soft
DY56107
Non-Vac
-
3/8”
Medium
DY56106
Non-Vac
-
3/8”
Medium
DY56177
Non-Vac
-
5/8”
Medium
DY56175
Non-Vac
-
5/8”
Medium
DY56105
Vac
6
3/8”
Medium
DY56104
Vac
5
3/8”
Medium
-
-
-
-
-
DY56176
Vac
5
5/8”
Medium
-
-
-
-
-
5” Hook Face Pads for Hook/Loop Discs
6” Hook Face Pads for Hook/Loop Discs
Non-Vac
-
3/8”
Medium
DY54327
Non-Vac
-
3/8”
Medium
DY54326
Vac
5
3/8”
Medium
DY54328
Vac
6
3/8”
Medium
Orbital Sander
Accessories
5” & 6” Multi Hole Grip
Faced Vacuum Backup Pad
Orbital Sander
Accessories
Porter Cable 5” &
6” Disc Pads
• Medium backup pads for 5” & 6” grip or
hook and loop sanding discs
• 5/16” – 24 mounting thread
• 5” diameter, 44 hole
• 6” diameter, 51 hole
Packing: MA915GV (10) per box,
MA916GV (5) per box.
Sold in: Both broken and full box
quantities. Discount available for
full box orders.
• 3/4” thick
Item#
A
B
MA915GV
A - MA915GV
Power Tools
DY54325
• Contour pads
Packing & Sold In: Each
Item#
Type
Size
Hole Pattern
Fits Tool
RK13700
PSA
5”
No Hole
7334, 7335
RK13900
PSA
5”
No Hole
332
RK13901
PSA
5”
5 Hole
333, 334
Description
RK13904
Hook/Loop
5”
5 Hole
333, 334
5” Grip Faced Vacuum Backup Pad
RK14700
PSA
5”
5 Hole
7334, 7335
B - MA916GV
RK16000
PSA• Fax:
6” 888-558-2237
No Hole
7336
MA916GV 6” Grip Faced
Vacuum Backup
800-BUY-BAER
(289-2237)
•Padwww.baersupply.com
V - 43
V Power Tools
orbital sander accessories
Orbital Sander Accessories
Festool Stickfix Sanding 5” & 6” Pads
• 9 hole hook and loop sanding pads
• Stickfix hard pads help maintain a crisp and flat surface, especially on edges
• Stickfix soft pads are high temperature resistant for heavy duty applications
• Stickfix super soft pads are more forgiving and allow abrasive to float easier on the surface
for smoother results; for medium/fine sanding and finishing
Packing & Sold In: Each
A - FJ492127
B - FJ492125
C - FJ492280
E - FJ492282
G - FJ484850
D - FJ492126
F - FJ493915
H - FJ493916
J - FJ493917
I - FJ486381
K - FJ486382
Item#
Type
Size
Fits Festool
Size
Fits Festool
A
FJ492127
Hard
5”
RO 125 FEQ
G
FJ484850
Hard
6”
ETS 150/3 EQ, ETS 150/5 EQ
FJ492125
Soft
5”
RO 125 FEQ
H
FJ493916
Soft
6”
RO 150 FEQ
C
FJ492280
Soft
5”
ETS 125 EQ
I
FJ486381
Soft
6”
ETS 150/3 EQ, ETS 150/5 EQ
D
FJ492126
Super Soft
5”
RO 125 FEQ
J
FJ493917
Super Soft
6”
RO 150 FEQ
E
FJ492282
Super Soft
5”
ETS 125 EQ
K
FJ486382
Super Soft
6”
ETS 150/3 EQ, ETS 150/5 EQ
F
FJ493915
Hard
6”
RO 150 FEQ
Orbital Sander
Accessories
6” Round Sanding Pads
• For use with Fein MF 636 6” Orbital Sander
• FI636R06-SPE peel and stick to sanding pad after removing old element
• FI636T-HLPD place this pad between the sanding pad and
sandpaper for super-soft sanding
Packing & Sold in: Each
• Backup pads for use with
random orbital or oscillating
sanders
Packing & Sold In: Each
Item#
Power Tools
Type
B
orbital sander
accessories
5” & 6” Sanding
Pads
V - 44
Item#
Size
Item#
Holes
PSA (Pressure SensitIVe Adhesive)
Description
FI636RO6-SP
6” Hook and Loop Backing Pad
FI636RO6-SPE
6” Hook and Loop Replacement Element
FI636T-HLPD
6” Extra Soft Sanding Pad
WW8521125010961
5”
-
WW8521125020961
5”
5
WW8521150010961
6”
-
WW8521150011961
6”
6
WW8521125110961
5”
-
WW8521125116961
5”
5
WW8521125117961
5”
Multi-Hole
WW8521150110961
6”
-
• For use with Fein FI1200
• Perforated with hook and loop
• Hard pad
WW8521150111961
6”
6
Packing & Sold In: Each
WW8521120117961
6”
Multi-Hole
Orbital Sander
Accessories
8” Sanding Pad
Hook & Loop
Würth Baer Supply Company
Item#
•
Description
FI1200SP 8” Sanding Pad for FI1200
Over
40,000 products in-stock EVERYDAY!
Power Tools V
orbital sander accessories
Orbital Sander
Accessories
5” Clean Sanding Low Profile
Pad Hookit
Orbital Sander
Accessories
5” Clean Sanding Low
Profile Pad Hookit
• 5” Hookit clean backup pad
• 3/8” thickness, 44 hole
• 5/16”-24 external thread
Packing & Sold In: Each
• 5” Hookit clean backup pad
• Soft density – use with 5” clean sanding
hookit disc of grade 220 and finer
• 11/16” thickness, 40 hole
• 5/16”-24 external thread
Item#
• Maximum 12,000 RPM
MM20353
MM20290
Orbital Sander
Accessories
6” Clean Sanding Low
Profile Pad Hookit
Orbital Sander
Accessories
5” Clean Sanding Disc Pad
Hookit
• 6” Hookit clean backup pad
• 3/8” thickness, 52 hole
• 5/16”-24 external thread
Item#
Packing & Sold In: Each
MM20356
• 5” Hook saver clean sanding disc
• 44 hole, hook type 2
• Maximum RPM: 12000
Item#
Packing & Sold In: Each
MM20444
Orbital Sander
Accessories
8” Hookit II Disc Pad 5 Bolt Hole
Orbital Sander
Accessories
5” Hookit II D/F Disc Pad
3 Bolt Hole
• For use with pre-punched Hookit II D/F Discs to facilitate
dust evacuation (5 dust holes Die 500FH)
• 5” diameter, 1/2” thickness
• Thread size 3 bolt holes
• Maximum 12,000 RPM
• Fits Porter Cable model 333
and 334 sander
Packing & Sold In: Each
Item#
MM50202
• Medium density replacement pad for
National Detroit 900 and Dynabrade 57700
• 8” diameter, 3/8” thickness
• Thread size 5 bolt holes
Item#
• Maximum 5,000 RPM
MM5281
Packing & Sold In: Each
Orbital Sander
Accessories
Gem Drive Pad with Hookit II
• Gem 11” drive pad with Hookit II
Packing & Sold In: Each
Orbital Sander Accessories
5” & 6” Hookit II Low Profile Disc Pads
Item#
GS515C
GS51SCH
• MM5245 use with 5” Hookit II discs of grades 220 and finer
• Max RPM: 12,000
• Thread size: 5/16-24 external
Packing: As shown below.
Sold in: Both broken and full box quantities. Discount available for full box orders.
Item#
Diameter
Thickness
Description
Box Qty
MM5245
5”
11/16”
Finishing Disc Pad
10
MM5275
5”
3/4”
Medium Density Disc Pad
10
MM5276
6”
3/4”
Medium Density Disc Pad
800-BUY-BAER (289-2237)
•
Description
11” Drive Pad w/Hookit II
11” Drive Pad w/Hook & Loop
10
www.baersupply.com
•
Fax: 888-558-2237
Power Tools
Packing & Sold In: Each
Item#
V - 45
V Power Tools
orbital sander accessories
Orbital Sander
Accessories
Abranet Grip Faced 1/4” Pad Protectors
• Available in 3”, 5” & 6” diameters
• 1/4” thickness
Packing & Sold In: As shown below.
A - MA9947
A
B
C
B - MA9955
Orbital Sander
Accessories
Mirka 5” Abranet Grip
Faced Vacuum
Backup Pad
• Abranet 3 hole grip faced vacuum
backup pad
• BD converts Black and Decker and
Dewalt 5” sanders to grip Abranet
abrasives
• PC converts Porter Cable 5” sanders
to grip Abranet abrasives
Packing & Sold In: Each
C - MA9956
Item#
Description
Box
Qty
MA9947
3” Abranet Grip Faced
Pad Protector
1
MA9955
5” Abranet Grip Faced
Pad Protector
5
MA9956
6” Abranet Grip Faced
Pad Protector
5
A - MA105GVBD
B - MA105GVPC
Item#
Description
A
MA105GVBD
5” Abranet Grip Faced Black & Decker
Backup Pad
B
MA105GVPC
5” Abranet Grip Faced Porter Cable
Backup Pad
Orbital Sander Accessories
Conversion Pads to Hookit II
• Converts an existing Hookit or Stikit pad to a Hookit II disc pad
• Can be used for applications where the existing disc pad accessories are designed for the Hookit II
• Conversion pads are also available with Scotchbrite material with Hookit and Hookit II backup pads
Packing: As shown below.
Sold in: Both broken and full box quantities. Discount available for full box orders.
Description
Size
Box
Qty
MM2327
No Holes – Hookit to Hookit II
5”
10
MM2329
No Holes – Hookit to Hookit II
6”
10
MM2331
No Holes – Stikit to Hookit II
5”
10
Power Tools
Item#
V - 46
Orbital Sander Accessories
Gem Hookit Conversion Pad
• 11” Hookit conversion pad
Packing & Sold In: Each
Item#
Description
GS111
11” Hookit™ Conversion Pad
Würth Baer Supply Company
•
Over 40,000 products in-stock EVERYDAY!
Power Tools V
belt sanders
Belt Sander
2-1/2” x 14”, No Dust Bag
• Porter Cable model #: 371K
• Rubber grip provides comfortable non-slip surface
• Flush side enables sanding up to perpendicular surface
• Dust sealed, recessed switch offers accessibility while
minimizing unintended turn-offs
• Removable auxiliary handle offers better control when
two-handed use is desired
• Removable dust port for passive dust collection
• Power: 120VAC
• Amps: 5
• SFPM: 1,100
• Belt Size: 2-1/2” x 14”
• Dimensions:
17” L x 4.5” W x 5.5” H
• Weight: 5 lb.
• Includes: (3) 80 grit belts, dust port,
removable auxiliary handle, and carrying case
Packing & Sold In: Each
Description
RK371K
Compact Belt Sander
Porter Cable model #’s: 361 & 360
Motor is located over platen for maximum performance and balance
Quick-release belt change lever
Fingertip belt-tracking knob for quick, accurate belt adjustments
Large capacity dust collection bag swivels 360 degrees (RK360)
Power: 120VAC, 25-60HZ
Amps: 12
SFPM: 1,500
Belt Size: 3” x 24”
Dimensions: 14”L x 11.25”W x 9.75”H (RK361),
20”L x 7”W x 8”H (RK360)
• Weight: 13.75 lb. (RK361), 14.5 lb. (RK360)
Packing & Sold In: Each
RK361
Description
Variable Speed Belt Sander with Dust Bag
800-BUY-BAER (289-2237)
BL1274DVS
Description
3” x 21” Belt Sander
with Dust Bag
•
•
•
•
•
•
•
•
•
•
• Porter Cable model #: 352VS
• Variable-speed dial 850-1,300 SFPM
• Designed for flush sanding up to vertical surfaces
• Dust bag swivels 360 degrees
• Fingertip belt-tracking knob
• Quick-release belt change lever
• Motor is located over platen for
maximum performance and balance
• Power: 120VAC, 25-60Hz
• Amps: 8
• SFPM: 850 - 1,300
• Belt Size: 3” x 21”
• Dimensions:
12.5” L x 5.75” W x 10.38” H
• Weight: 10.75 lb.
Packing & Sold In: Each
RK352VS
Item#
Belt Sander
3” x 24”, With & Without Dust Bag
Belt Sander
3” x 21” Variable Speed
With Dust Bag
Item#
• Bosch model #: 1274DVS
• Lightweight model designed for both vertical and
horizontal applications
• Variable speed dial allows matching belt speed for work
• 16’ cord for extended range of operation
• Motor: 6.6 amps
• Belt Speed: 550 to 1,100 SFPM
• Weight: 7.1 lb.
Packing & Sold In: Each
•
RK360
Item#
Description
RK361
Belt Sander
RK360
Belt Sander with Dust Bag
www.baersupply.com
•
Fax: 888-558-2237
Power Tools
Item#
Belt Sander
3” x 21” Belt, Variable Speed
With Dust Bag
V - 47
V Power Tools
belt sanders & accessories
Belt Sander
3” x 24” Belt, Variable Speed
With Dust Bag
Belt Sander
4” x 24” Belt, Single Speed
With Dust Bag
• Porter Cable model #: 360VS
• Variable-speed dial is located on handle, allowing belt speed
adjustment from 1,000 to 1,500 SFPM
• Motor is located over platen for max. performance & balance
• Quick-release belt change lever
• Fingertip belt-tracking knob for accurate belt adjustments
• Large capacity dust collection bag swivels 360 degrees
• Power: 120VAC, 60HZ
• Amps: 12
• SFPM: 1,000 – 1,500
• Belt Size: 3” x 24”
• Dimensions: 20”L x 7”W x 8”H
• Weight: 14.5 lb.
Packing & Sold In: Each
• Porter Cable model #: 362
• Features fingertip belt tracking knob for quick, accurate
belt adjustment and quick release belt change lever
• Large capacity dust collection bag that
has 360 degree swivel
• Motor: 12 amps
• Belt Speed: 1,500 SFPM
• Weight: 15.5 lb.
Packing & Sold In: Each
Item#
Description
RK360VS
Item#
Description
RK362
Belt Sander w/ Dust Bag
Variable Speed Belt Sander With Dust Bag
belt sander
4“ x 24” Belt, Single & Variable Speed With Dust Bag
Power Tools
• Bosch model #’s: 1276D and 1276DVS
• Rugged design
• Adjustable front handle that can be folded
• Motor: 10.5 amps
• Single Belt Speed:
1,550 SFPM
• Variable Speed Belt:
Item#
1,150 to 1,550 SFPM
BL1276D
• Weight: 12.0 lb.
• Length: 13.8”
BL1276DVS
Packing & Sold In: Each
V - 48
Description
Single Speed with Dust Bag
Variable Speed with Dust Bag
belt sander accessories
Replacement Belts For RK371K Belt Sander
Packing & Sold In: 1 pack of 5 belts
Item#
Description
RK1501
60 grit 2-1/2” x 14” Belt
RK1502
80 grit 2-1/2” x 14” Belt
RK1503
100 grit 2-1/2” x 14” Belt
RK1504
120 grit 2-1/2” x 14” Belt
RK1505
180 grit 2-1/2” x 14” Belt
Würth Baer Supply Company
•
Over 40,000 products in-stock EVERYDAY!
Power Tools V
belt sander accessories & coving routers
belt sander accessories
Service Parts for
Belt Sanders
belt sander
accessories
Belt Sander Shoes
Packing & Sold In: Each
Item#
Description
Item#
Description
Use With Model
BL2-610-908-624
Metal Shoe
1275DVS
Model
BL2-610-908-625
Metal Shoe
1276D, 1276DVS
BL3-601-010-509
Graphite Shoe
1276D, 1276DVS
RK824216
Carbon Brush
500 Series
RK849317
Switch
350 Series
RK875697
Cord
350 Series
RK802787
Cord
691, 6911, 6912,
724-726, & 736
belt sander accessories
Cork/Metal Shoes & Dust Bags
Packing & Sold In: Each
Item#
For Use With
Cork Shoes
RK839040
350 Series, 500 Series, 360 Series (3” Wide)
RK804204
360 Series (4” Wide)
Metal Shoes
RK903400
350 Series
RK908909
360 Series (4” Wide)
RK908910
360 Series (3” wide)
Dust Bags
350 Series, 360 Series, 500 Series
Power Tools
RK692639
Coving Sander, air powered
• Betterly model #: 300
• Easy one hand operation - weighs less than 2 lb.
• “Locking” pad mounting system for maximum sanding efficiency
• Uses convenient, readily available 4-1/2” x 30’ rolls of adhesive-backed sand paper
• Air consumption: 4 CFM at 85 psi
• Includes: Coving pad, flat pad, soft contour pad and
Item#
Description
6-1/2 foot flexible air hose
Packing & Sold In: Each
BY300
Coving Sander
800-BUY-BAER (289-2237)
•
www.baersupply.com
•
Fax: 888-558-2237
V - 49
V Power Tools
finishing, detail & linear sanders
Finishing Tool,
air powered
Lightweight Dyninger
finishing tool,
air powered
Dynafine Backsplash Sander
Versatility Kit
• For fabricating solid surface coved backsplashes and ideal for
cleaning metal edges and corners
• Air motor features 1/32” diameter orbital action for achieving a
superior finish
• Low profile housing allows easy access in hard-to-reach areas
• Handle is offset 7 Degree for greater operator comfort and control
• Includes tool, an assortment of PSA abrasives, and five sanding
pads (58020) 1/4” radius, (58021) 3/8” radius, (58022) 1/2” radius,
(58023) 5/8” radius, (58024) 3/4” reverse radius
• .12 HP
• 7 Degree offset
• 15,000 RPM
• 1/32” (0.8 mm) Dia. orbit
• Rear exhaust
• Max air flow at 90 PSIG: 20
• Weight: 2.18 lb.
• Dimensions: 3-3/4”H x 9”L
Packing & Sold In: Each
Item#
Item#
DY52050
DY58010
Power Tools
Detail sander,
electric powered
• Festool model #: DX93E
• Ideal for sanding edges, surfaces, and corners in a single operation
• For use on wooden staircases, parquet floors, etc.
• Full-area sanding into every corner through orbital sanding
motion
• Sanding stroke of 2.5 mm guarantees above average material
removal
• Integrated dust extractor port
• Step-less electronic speed control for various uses
• StickFix® (Hook and Loop) sanding system for fast replacement
of sanding pad and abrasives
• 150 watts/1.3 amps 120v AC
• 5,000 - 9,500 opm
• Includes: StickFix® (Hook and Loop)
93 V sanding pad 3-11/16” (93 mm,
soft, 488715), (1) abrasive sheet,
Flat sanding pad (488036),
In Systainer 2
Packing & Sold In: Each
Item#
Würth Baer Supply Company
Linear Sander,
Electric Powered
3-5/32” x 5-1/4” Pad, Dust Collector
• Festool model #: LS 130 EQ
• Stickfix (hook and loop) sanding system for fast
replacement of sanding pad and abrasives
• Wide range of pads can be mounted for any application
• Tool-less pad design
• Integrated dust extraction with
variable speed and lockable trigger
• Speed: 4,000 – 6,000 opm
• Sanding Stroke: 5/32”
• Weight: 3.94 lb.
• Power Consumption: 120VAC
• Amps: 2.2
• Watts: 260
• Accessories included: 90 degree sanding pad, abrasive sheet,
Plug-it power cord, Stickfix sanding pad - flat,
In Systainer 1 (445433)
Packing & Sold In: Each
Item#
FJ567738
V - 50
• For use with Spindle-Mount, Arbor-Mount
and Eyelet Sanding Stars
• Mount 4” diameter spindle-mount abrasive sanding
stars with 1/4” shank, or Eyelet Dy-Cut sanding stars
• Excellent for use on wooden parts, moldings, raised
panels and intricate profiles
• Eliminates raised grain and removes loose fibers when
whitewood sanding as well as scuffing sealer coats
• Includes 94407 Air-Flow Control Dynaswivel fitting for
maximum tool maneuverability and control
• .4 HP
• Straight-Line
• 0-3,200 RPM
• Rear exhaust
• 1/4” Collet
• Max air flow at 90 PSIG: 22
• Weight: 1.87 lb.
• Dimensions: 1-5/8”H x 9-1/4”L
Packing & Sold In: Each
FJ567777
•
Description
Duplex Linear Sander Dust Collector
Over 40,000 products in-stock EVERYDAY!
Power Tools V
dust extractors
Dust Extractors
Large Capacity
• Festool model #: CT 22 & CT 33
• For non-hazardous dusts
• HEPA filter elements filter down to 0.3 micron
• Larger wheels provide stability and ease of movement
• Locking brake on rear wheels means no accidental movement of the dust extractor
• Large flat area for tools or Systainer stacking
• Tool-triggered or manual on-off switch with smooth start up and shut off delay
• Replaceable filter bag
• Step-less electronic suction control
• Wet and dry extraction with no complicated conversion
• Integrated cleaning device (scratcher) cleans the filter in the blink of an eye
• Blower port
• Standard antistatic equipment protects against electrostatic charging
• Power: 350-1200 watts; 2.9-10 amps 120v AC
• Includes: (1) fitted filter bag (452971), (1) antistatic suction hose 1” x 11.5’ (27 mm x 3.5 m, 452878)
and HEPA filters
Packing & Sold In: Each
Item#
Container Capacity
FJ583366
5.8 Gallons
FJ583368
8.7 Gallons
FJ583366
FJ583368
Dust Extractors
Portable, Mobile
Item#
FJ583360
Container Capacity
FJ583360
2.6 Gallons
FJ583376
3.96 Gallons
800-BUY-BAER (289-2237)
FJ583376
•
www.baersupply.com
•
Fax: 888-558-2237
Power Tools
• Festool model #: CT MIDI & CT MINI
• Tool-Triggered or manual activation. With smooth start up and shut off delay
• Compact dimensions and light weight
• Remarkable dust extraction capability. Keeps your work area clean and the air you
breathe dust-free
• Simple wet to dry conversion
• On-board hose and cord management
• Adjustable power/ suction settings
• Quiet running
• Antistatic design prevents electrostatic charging
• Power: 400-1200 watts; 3.3-10 amps 120v AC
• Includes: (2) replacement filter bags, (1) antistatic suction hose 1-1/16” x 11.5’ (27mm x 3.5mm)
and (1) micron filter
Packing & Sold In: Each
V - 51
V Power Tools
dust extractor & accessories
dust extractor
Wet/Dry
• Vacuum delivers 99.85% filtration efficiency - great for fine particulate pick-up, like drywall or solid-surface dust
• Built-in outlet for use with power tools - vacuum starts automatically when tool is turned on
• Includes 15 second vacuum overrun to clear hose when tool is turned off
• 25’ cord
• Dual filtration system with washable automotive-type paper filter and 2-ply ten-gallon paper filter bag for dust pick-up
• Corrosion resistant polypropylene tank
• Large wheels for easy maneuvering
• Convenient flat top surface tray for holding tools while working
• Includes: Vacuum, hose, and operating manual
• Power: 120 VAC, 25 - 60 Hz.
• Motor Amps: 9 (alone), 15 (with tools)
• Air Volume: 114 cu. ft./min.
• Vacuum Water Lift/in.: 94
• Liquid Capacity: 10 gal.
Item#
• Solids Capacity: 10 gal.
• Bag Capacity: 10 gal.
RK7812
• Size: 19”L x 14” W x 23-1/2”H
Packing & Sold In: Each
Dust Extractor
Fein Turbo II
dust extractor accessories
For Porter Cable Dust Extractors
• For use with random orbit sanders
• Dual fan turbo cooling system extends motor life
• Can be used wet or dry
• Tools switch turns the dust extractor on and off
and provides a 10 second delay after shutoff to
clear the hose
• Air Flow: 116 cfm
• Power Cord Length: 16 ft.
• Hose Dimensions: 16’L, 1-1/4” diameter
• Capacity Dry: 9 gallons
• Capacity Wet: 6.8 gallons
• FI913036A01 Replacement Dust Bags
Packing & Sold In: Each
• 2-ply filter bags
Packing & Sold In: 3 bags per pack.
RK78121
RK78114
Item#
For Porter Cable Model
Capacity
RK78114
7810
5 Gallon
RK78121
7812
10 Gallon
Power Tools
Item#
dust extractor
accessories
For Fein Dust Extractors
FI95513
Packing & Sold In: Pack of 3 disposable dust bag
Item#
V - 52
Würth Baer Supply Company
•
Fits
FI636RO6-DB
Old Style Fein
Vac 1
FI913036K01
Fein Turbo II
Over 40,000 products in-stock EVERYDAY!
Power Tools V
dust extractor accessories
Dust extractor accessories
For Festool CT Series Dust Extractors
Packing & Sold In: Each
Item#
A
Compact cleaning set
• Docked to your CT Dust Extractors for quick and easy access
• Rigid, lightweight and crack resistant polypropylene tubes and nozzles
• Includes: (1) Systainer 1 (FJ445433)
(1) 36mm Polyproplyene curved hand tube (FJ452901)
(3 pcs.) 36mm Polyproplyene extension tube (FJ452903)
(1) 36mm Polyproplyene interchangeable floor nozzle (FJ452906)
(1) 36mm Polyproplyene crevice nozzle (FJ452904)
(1) 36mm Polyproplyene upholstery nozzle (FJ440406)
NOTE: Compatible with CT22, CT33, CT MINI and CT MIDI.
B
Universal cleaning set
• General purpose cleaning set
• Includes: (1) Systainer 4 (FJ445597)
(1) 36mm Polyproplyene Non-antistatic hose (11.5’) length (FJ452882)
(1) 36mm Polyproplyene curved hand tube (FJ452901)
(3 pcs.) 36mm Polyproplyene extension tubes (FJ452903)
(1) 36mm Polyproplyene standard floor nozzle (FJ452907)
(1) 36mm Polyproplyene crevice nozzle (FJ452904)
(1) 36mm Polyproplyene upholstery nozzle (FJ440406)
(1) 36mm Polyproplyene suction brush (FJ440404)
NOTE: Compatible with CT22 and CT33 only.
C
Tradesperson/installer cleaning set
• Ideal for clean-up on the jobsite, especially if residential
• Includes: Systainer 4 (FJ445597)
(1) 36mm Polyproplyene antistatic hose 3.5m (11.5’) length (FJ452882)
(1) 36mm Polyproplyene curved hand tube (FJ452900)
(3 pcs.) 36mm Polyproplyene extension tube (FJ452902)
(1) 36mm Polyproplyene multipurpose floor nozzle (FJ452911)
(1) 36mm Polyproplyene crevice nozzle (FJ452904)
(1) 36mm Polyproplyene upholstery nozzle (FJ440406)
(1) 36mm Polyproplyene suction brush (FJ440404)
Note: Compatible with CT22 and CT33 only.
D
Workshop cleaning set
• Heavy duty cleanup set for commercial or home shop use
• Includes: (1) Systainer 4 (FJ445597)
(1) 36mm Polyproplyene antistatic hose (11.5’) length (452882)
(1) 36mm Polyproplyene stainless steel curved hand tube (FJ452900)
(3 pcs.) 36mm Polyproplyene extension tube (452902)
(1) 36mm Polyproplyene aluminum industrial floor nozzle (452908)
NOTE: Compatible with CT22 and CT33 only.
E
Industrial cleaning set
• Large diameter tubes and hose to pick up large debris
• Includes: Cardboard box
(1) 50mm Polypropylene Non-antistatic hose 2.5m (8.25’) length (FJ452887)
(1) 50mm Polypropylene extension tube (FJ440412)
(2 pcs.) 50mm Polypropylene workshop floor nozzle (FJ452909)
(1) 50mm Polypropylene square nozzle (FJ440416)
(1) 50mm Polypropylene large crevice nozzle (FJ452912)
(1) 50mm Polypropylene suction brush (FJ440419)
NOTE: Compatible with CT22 and CT33 only.
800-BUY-BAER (289-2237)
•
A
FJ456736
B
FJ454769
C
FJ454766
D
FJ454767
E
Power Tools
Description
FJ454770
www.baersupply.com
•
Fax: 888-558-2237
V - 53
V Power Tools
dust extractor accessories
Dust extractor accessories
For Festool CT Series Dust Extractors
Packing & Sold In: Each
Description
Power Tools
A
V - 54
Item#
Antistatic Hoses
• Rotating connector (extractor end)
• Reducing sleeve (tool end)
• Antistatic properties reduce shocks
1-16” x 16.5’ (27mm x 5m) Compatible with CT22, CT33, CT MINI and CT MIDI
FJ452880
1-7/16” x 11.53’ (36mm x 3.5m) Compatible with CT22 and CT33 only
FJ452882
1-15/16” x 13’ (50mm x 4m) Compatible with CT22 and CT33 only
FJ452890
B
Hose Sleeves - Rotating Connectors
• For use with antistatic extractor end hoses
• Antistatic version for D 50mm suction hose
NOTE: Compatible with CT22 & CT33 Dust Extractors.
FJ452896
C
Hose Sleeves - Rotating Adapter
• For tool end of hoses or use with cleaning sets, tubes, nozzles and brushes
• With rotating adapter for D27mm suction hose
• Tool end of extraction hose for standard 27mm hose
NOTE: Compatible with CT22, CT33, CT MINI and CT MIDI Dust Extractors.
FJ487071
D
Hose Sleeves - Connector Sleeve
• For tool end of hoses or use with cleaning sets, tubes, nozzles and brushes.
• Connects suction hoses D 50mm/D36mm/D27mm
• Connects rotating connector (extractor ends) together
• Taper fit
NOTE: Compatible with CT22 & CT33 Dust Extractors.
FJ493047
E
Hose Sleeves - Antistatic Y-Piece With Blanking Plug
• For tool end of hoses or use with cleaning sets, tubes, nozzles and brushes
• Connects two suction hoses to the dust extractor
• Includes blanking plug to cap off unused inlet
NOTE: Compatible with CT22 & CT33 Dust Extractors.
FJ452898
F
Tubes - Non-Antistatic Polypropylene
• Rigid, lightweight and crack resistant
• 3 pieces
• 37-1/2” (L=950mm) D 36mm
NOTE: Compatible with CT22, CT33, CT MINI and CT MIDI Dust Extractors.
FJ452903
Nozzles - Upholstery Brush
• Plastic, brush ring
• 4-11/16” x 1-5/8 (120 x 40mm)
• Fits 27 and 36 mm hose an tubes
NOTE: Compatible with CT22, CT33, CT MINI and CT MIDI Dust Extractors.
FJ440406
G
Würth Baer Supply Company
•
A
B
C
D
E
F
G
Over 40,000 products in-stock EVERYDAY!
Power Tools V
dust extractor accessories
Dust extractor accessories
For Festool CT Series Dust Extractors
Packing & Sold In: Each
A
Description
Item#
A
Handle
• Improves mobility of extractor
• Provides mounting space for air service unit and boom arm
NOTE: Compatible with CT22 & CT33 Dust Extractors.
FJ452921
B
Suction Hose Holder
• Raises hose to table height and prevents trip hazard
NOTE: Compatible with CT22 & CT33 Dust Extractors.
FJ452896
B
D
C
C
Hose Hook
• Allows for hose to be wound and stored on the front of the CT Dust Extractor
NOTE: Compatible with CT22 & CT33 Dust Extractors.
FJ452998
D
CT Adapter Plug
• Replacement CT Adaptor Plug
• Adapts the 20 amp CT plug to fit in standard 15 amp outlets
NOTE: Compatible with CT22, CT33, CT MINI and CT MIDI Dust Extractors.
FJ493232
E
E
Boom Arm
• Keeps the cord and hose up and out of the way
• Requires handle FJ452921 (452921) to be mounted on the dust extractor
NOTE: Compatible with CT22 & CT33 Dust Extractors.
FJ492753
F
CT Hose Garage
• For Festool CT 22 and CT 33 Dust Extractors
• Stores and protects hose and cord for transport
• Extends Sys-Doc feature for systainers
NOTE: Compatible with CT22 & CT33 Dust Extractors.
FJ494388
H
Wet Filter Element
• Helps to prevent foam buildup associated with wet extraction
Power Tools
G
F
G
2 pieces (Use with CT22 & CT33 Dust Extractors)
FJ452924
1 Piece (Use with CTMIDI and CTMNI Dust Extractors)
FJ456805
HEPA Filter Element
• HEPA filter element filters to .3 microns
NOTE: Compatible with CT22 & CT33 Dust Extractors.
FJ493334
H
800-BUY-BAER (289-2237)
•
www.baersupply.com
•
Fax: 888-558-2237
V - 55
V Power Tools
dust extractor accessories
Dust extractor accessories
For Festool CT Series Dust Extractors
Packing & Sold In: Each
Description
I
J
K
Power Tools
L
Item#
Filter Bags
• Spun bound filter bag
• Tear resistant polyester fleece
• Filters particles to 5 microns
• Integrated flap to close bag
I
5 Bags (For use with CT MINI Dust Extractor only.)
FJ456772
5 Bags (For use with CT MIDI Dust Extractor only.)
FJ494105
20 Bags (For use with CT 22E Dust Extractor only.)
FJ494631
Filter Bags
• Spun bound filter bag
• Tear resistant polyester fleece
• Filters particles to 5 microns
• Integrated flap to close bag
• Includes dust cap
J
5 Bags (For use with CT 22E Dust Extractor only.)
FJ452970
5 Bags (For use with CT 33 Dust Extractor only.)
FJ452971
Long Life Filter Bags
• Reusable bags - at least 500 fillings
• Re-sealable
NOTE: For use with CT 33 E Dust Extractor only.
FJ456738
K
Antistatic Hoses
• Combines air supply, exhaust air and dust extraction in a single hose
• Tool-side rotator connector to prevent twisting
• Extremely flexible, tough, non-marring
NOTE: For use with CT 33 Mobile Dust Extractor only.
16’4 hose length
FJ488176
22.9’ hose length
FJ488131
M
Double Adapter for Antistatic Hoses
• To run 2 air tools on 1 CT Dust Extractor
• Requires the use of FJ454758 (454725) adapter
NOTE: For use with FJ488176 and FJU488131 (IAS 2) only.
FJ454758
N
Adapter for Antistatic Hoses
• For the IAS 2 hose for general cleaning tasks
• Prevents damage to tools and hose that may result if the IAS 2 Hose is used
for dust extraction without this adapter
NOTE: For use with FJ488176 and FJU488131 (IAS 2) only.
FJ488418
L
M
N
V - 56
Würth Baer Supply Company
•
Over 40,000 products in-stock EVERYDAY!
Power Tools V
PORTABLE AIR HAMMERS & BLOW GUNS
Portable Air
Hammer
Blow Gun
Plastic
• For use on T-moulding
• Operating pressure 60-125 psi; air consumption 2-4 CFM
• Delivers 1,000 blows per minute
• Versatile, interchangeable tips of super-soft to hard plastic,
steel and aluminum, diameter of 1-1/2” (1 medium tip included)
• Palm size; lightweight
Packing & Sold In: Each
• Ideal for vertical installations
• Noise reduced, meets OSHA
• Maximum working pressure 175 psi, 1/4” NPY inlet connection
Packing: As shown below.
Sold In: Both broken and full box quantities.
Discount available for full box orders.
Item#
Item#
Box Qty
WW7149234
DAAH15M
24
blow gun
Safety Blo-Gun with
Extensions
blow gun
In-Line Blow Gun
• Clean off work surfaces without disconnecting
• Only connect once; permanently mounts
between coupler and air hose to purge air line of
water and contaminants before starting up air tools
• Durable aluminum construction, weighs only 2 oz. (0.06 kg)
• Meets O.S.H.A. requirements of special
relief hole in nozzle which limits pressure
to 30 PSIG (2 Bar) when dead ended and
used on an air line of 150 PSIG
(10.3 Bar) or less
Packing & Sold In: Each
Item#
• Four safety by-pass holes allow air to escape if tip-hole is
blocked
• By-pass holes do not interfere with normal air flow
• Special internal design permits a restricted maximum
discharge of 30 psi
• Discharges same air volume as full flow blo-guns, while
maintaining required noise level and nozzle pressure
• Maximum inlet pressure: 150 psi
• 1/4” NPT air inlet, nozzle thread 1/2”-27
• Zinc alloy body
• OSHA compliant
Packing & Sold In: Each
Item#
DY94467
Blow Gun
Full Flow Safety Lever
• Meets OSHA requirements of special relief holes in nozzle
which limits pressure to 30 PSI when dead ended (static pressure)
• Maximum working pressure: 150 PSI
• SCFM 10.0 @ 100 PSI
• 1/4” NPT air inlet, nozzle thread size: 7/16”-27
• Body outlet thread size 1/2”-27
Packing & Sold In: Each
Item#
MF150
blow gun
Pocket Blo-Gun With Shirt
Clip Adjustable Aluminum
• Easy grip two finger control to adjust from full volume
air flow to complete shut off
• Knurled grip for secure handling even with oily or greasy fingers
• M-style (fits any 1/4” Industrial style coupler)
• Maximum inlet pressure: 150 PSI
• SCFM 15.9 @ 100 PSI
Packing & Sold In: Each
Power Tools
MF131
Item#
MF115
800-BUY-BAER (289-2237)
•
www.baersupply.com
•
Fax: 888-558-2237
V - 57
V Power Tools
MILLING MACHINE & HEAT GUN
Cantex Milling
Machine
Heat Gun
Heavy Duty
• Colonial Saw model Lamello Cantex Ergo
• For flush milling solid wood edges as well as
mini-spot patches
• Equipped with the successful Step Memory System
for high-precision requirements
• Cutter head with 3 carbide disposable reversing blades
• Milling width 45 mm
• Detachable nylon Platen-Gib on one side ensures
problem-free entry into solid wood edges
• Support to protect the milling machine when it is
running down or not in use
• Power: 705W
• Voltage: 120/230 V
• Speed: 10,000 rpm
• Cutting width: 45mm
• Cutter head: 3 reversing blades
• Weight: 7.5lb.
• Includes: tool set, wooden case
and operating instructions
Packing & Sold In: Each
• Bosch model # 1942
• For continous duty, industrial applications
• Insulated nozzle allows cool exterior temperature, air intake
allows variable temperature adjustments
• Padded adjustable stand
• Rating: 120V
• Amps: 14.3
• Max. Temperature: 1,000° F
• Max. Air Volume: 23 CFM
• Length: 8”
• Weight: 3.5 lb.
Packing & Sold In: Each
Item#
Description
BL1942
Heat Gun
BL3-609-390-504
Replacement Heat Element
Item#
Power Tools
LM111857
V - 58
Würth Baer Supply Company
•
Over 40,000 products in-stock EVERYDAY!
Power Tools V
STORAGE CONTAINERS & ACCESSORIES
storage system
Systainer Port
Storage container
Systainer Cases, Empty
• Secure, space saving accessible
storage of Systainers
• Systainer boxes not included
• Includes: 5 Systainer telescopic
drawers and casters
• Dimensions (without wheels):
15-3/4”D x 19-11/16”W x 39-3/8”H
NOTE: For use with Festool®
Systainers only.
Packing & Sold In: Each
• Strong, flexible, convenient way of storing, carrying and
combining tools and accessories
• Creates portable workstations and can be latched to one another
• Stackable
NOTE: For use with FJ491922 (Systainer Port) only.
Packing & Sold In: Each
Item#
FJ491922
FJ445596
storage
container
Sortainer Drawer Systems
Item#
• Drawer sets latch onto Festool® Systainers and
CT Dust extractors
• Same dimensions as the SYS 3 (15-5/8”L x 11-5/8”W x 8”H)
• Drawers and compartments can be configured
with insert dividers
NOTE: For use with Festool® Systainers only.
Packing & Sold In: Each
FJ445597
FJ493283
Description
Size
FJ445596
SYS 3 Empty Systainer
15-5/8”L x 11-5/8” W x 8”H
FJ445597
SYS 4 Empty Systainer
15-5/8” L x 11-5/8”W x 12”H
FJ493283
SYS 5 Empty Systainer
15-5/8”L x 11-5/8”W x 16”H
storage container
accessories
Drawer Dividers
• Available in three drawer sizes:
small, medium and large
NOTE: For use with Festool®
Systainers only.
Packing & Sold In: Each
Item#
FJ491985
9 Drawer Sortainer
Description
FJ491522
4 Drawer Sortainer (2 Small Drawers,
1 Med. Drawer & 1 Large Drawer)
FJ491985
9 Drawer Sortainer (6 Small Drawers
& 3 Medium Drawers)
Description
FJ491691
Small Drawers, 10 pieces
FJ491692
Medium Drawers, 5 pieces
FJ491693
Large Drawers, 2 pieces
storage container
accessories
Systainer Cart
• Mobile platform for Systainers
• Maximum load: 110 lb.
• Comes with 4 locking straps
NOTE: For use with Festool®
Systainers only.
Packing & Sold In: Each
Power Tools
Item#
FJ491522
4 Drawer Sortainer
Item#
FJ492388
800-BUY-BAER (289-2237)
•
www.baersupply.com
•
Fax: 888-558-2237
V - 59
V Power Tools
planers
Planer, electric powered
2-1/4” Width x 0” - 1/8” Depth
• Virutex model #: Edge Lipping Planer AP98
• Designed for flush planing of edges that are added to a board
• Continuous cutting depth adjustment with no minimum increment allows precision flush planing
of edges up to 2-1/4”, solid surface, hardwood, softwood, laminates & PVC edges
• Non-scratch Teflon coated base slides on the work surface
• Heavy weight to eliminate any vibration
• Horsepower: 1.4
• Motor: 1050 watts
• Voltage: 110v
• Speed: 11,100 rpm
• Removal rate: 1/8” per pass
• Cutting width: 2-1/4”
• Max Cutting depth: 1/8”
• Blades: reversible carbide
• Weight: 17 lb.
• Includes: a set of carbide spare reversible blades
Packing & Sold In: Each
Item#
Description
VXAP98
Edge Lipping Planer
VXAP98B
Replacement Carbide Cutter
Power Tools
planer, electric powered
3-1/4” Width x 0” ­- 1/8” Depth, Portable
• Freud model #: Avanti FE84K
• Designed to handle beveling, chamfering, rabbeting, and surface planning with ease
• Calibrated depth controls with detents allow for precision depth adjustment
• Power: 7.5 amps
• Voltage: 120v
• Speed: 13,000 rpm
• Speed Control: Electronic
• Cutting width: 3-1/4”
• Max Cutting depth: 1/8”
• Depth control: calibrated with detents
• Blades: reversible carbide
• Weight: 5.4 lb.
• Includes: Reversible Carbide Knives, Blade Wrench, Fence, Rabbeting Depth Stop
and Dust Collection Nozzle
Packing & Sold In: Each
Item#
Description
ABFE84K
V - 60
Portable Paner
Würth Baer Supply Company
•
Over 40,000 products in-stock EVERYDAY!
Power Tools V
planers & ACCESSORIES
Planer, electric powered
3-15/64” Width x 0” - 9/64” Depth
• Festool model #: HL 850 E
• HL 850 lets you cut flush to an adjacent surface because it can plane across the entire width of the rabbet
• Rotary handle depth adjustment with a cut depth up to 9/64”
• Thumb lock depth control
• Converts to a joiner with the addition of a bench unit stand and angle stop
• Near total chip extraction
• Single knife cutter head – spiral, metal carbide
• Unlimited rabbeting depth
• Interchangable heads with quick blade changes
• MMC Electronics equipped with soft-start for no-jolt starts, and constant speed under load
• Motor: 7 amps / 120vac
• Power Consumption: 850 W
• Speed: 10,000 rpm
• Cutting width: 3-15/64”
• Max Cutting Depth: 9/64”
• Blades: Reversible Carbide
• Weight: 8.6 lb.
• Includes: Parallel Guide (484513), Rabbet Depth Guide (484512), Solid Carbide Standard Blade (484575),
Standard Planer Head (484520) and Systainer 3 (445596)
Packing & Sold In: Each
Item#
FJ574539
planer accessories
NOTE: For use with Festool® HL 850E Planer only.
Packing & Sold In: Each
Item#
A
Standard Blade
• For standard, smooth head
B
Bench Unit
• For bench-mounted truing and rebates
• Pivoting protective cover, nonskid base, depth-setting ring, locking on/off
switch Type: SE-HL
• Does not include planer or angle stop
• For a complete unit, the angle stop (485018) is required
FJ485017
C
Clamps
• Traditional screw clamp with head to be used in the bottom continuous
T-slot of the guide rails to securely clamp to material
• Clamping Thickness: 4-11/16” (120mm)
FJ489570
800-BUY-BAER (289-2237)
FJ484515
•
A
B
C
www.baersupply.com
•
Fax: 888-558-2237
Power Tools
Description
V - 61
V Power Tools
CIRCULAR & MITER SAWS
circular saw
Plunge Cut Design
circular saw
Plunge Cut Design
• Festool model #: TS55EQ
• For solid wood, fine veneer panels, sheet goods-plastic
and aluminum
• Quick and easy cutting depth adjustment, cutting depth 2.17”
• Bevel unit allows you to swivel the blade up to 45 degrees
on the guide rail for clean cut edges even on bevel cuts
• Detachable Plug-it cord, if the cord gets damaged, plug in
a new one
• Rotating dust extractor connector, easy to adjust the dust
extraction
• Spring-loaded riving knife, retracts into the housing
automatically during plunge cuts
• MMC electronics with 6 control and monitoring functions,
including soft start, constant speed under load, stepless speed
adjustment, temperature and current-triggered overload
protection
• FastFix saw blade changing system for easy blade change
• Triple motor bearing, improves running smoothness and
extends service life
• Zero-play guidance, adjust the saw base on the guide rail
without tools
• Splinter guard on both sides of the cut, guide rail rubber splinter
guard on one side, attachable plastic splinter guard on the other
• Includes: (1) 55” Guide Rail (491498), (1) 48-Tooth Carbide Blade
(491952), (1) Limit Stop FS/2 (491582), (1) Plastic Splinter Guard
(pack of 5 available as 491473), (1) Plug-It Power Cord, In
Systainer 4 (445597)
Packing & Sold In: Each
• Festool model #: Kapex TS75EQ
• Cutting depth, 2-15/16” or 2-3/4” with the included guide rail
• 13 amps of adjustable power
• Weighs less than 14 lb.
• Quick and easy cutting depth adjustment
• Bevel unit allows you to swivel the blade by up to 45 degrees
on the guide rail for clean cut edges even on bevel cuts
• Detachable Plug-it cord, if the cord is damaged, plug in a new one
• Rotating dust extractor connector, easy to adjust the dust extraction
• Spring-loaded riving knife, retracts into the housing
automatically during plunge cuts
• MMC electronics with 6 control and monitoring functions, including
soft start, constant speed under load, stepless speed adjustment,
temperature and current-triggered overload protection
• FastFix saw blade changing system for easy blade change
• Triple motor bearing, improves running smoothness and
extends service life
• Zero-play guidance, adjust the saw base on the guide rail
without tools
• Splinter guard on both sides of the cut, guide rail rubber
splinter guard on one side, attachable plastic splinter guard
on the other
• Slip clutch drastically reduces the effects of kickbacks
• Includes: (1) 75” guide rail (491503), (1) Universal saw blade
(4953808, 36 teeth), (1) Limit stop FS/2, (491582),
(1) Plastic Splinterguard (pack of 5 available as 491473),
In Systainer 5
Packing & Sold In: Each
Item#
Item#
FJ561174
FJ561188
Power Tools
Sliding Compound Miter Saw
V - 62
• Festool Model #: Kapex KS120
• Cutting depth 90º/90º: 12” x 3-15/32”
• Special cutting depth: 4-23/32” x 3/4”
• Flexible, removable dust hood to the rear of the blade deflects the waste material in the directional dust port
• 50º left miter and 60º right miter position
• 13 amps of adjustable power
• Speed: 1,400 - 3,400 RPM
• Fully adjustable dual line lasers define the cut are for precise cut placement
• MMC allows you to match the speed of the blade with the requirements of the material
• Oversized bevel scale facilitates precision angle setting
• FastFix saw blade changing system for easy blade change
• Weighs 47 lb.
• Includes: 60 tooth high quality carbide blade (495388), MiterFast angle transfer device,
Hold down clamp and Wrench
Item#
Packing & Sold In: Each
Würth Baer Supply Company
•
FJ561287 products in-stock EVERYDAY!
Over 40,000
Power Tools V
CIRCULAR & MITER SAW ACCESSORIES
circular & miter saw accessories
NOTE: For use with Festool® TS55EQ & TS75EQ Circular Saws and Kapex KS120 Miter Saw.
Packing & Sold In: Each
Item#
A
Parallel Edge Guide
• Designed for use with Festool Circular Plunge Saw
• Create parallel cuts from an edge
• Can be used on both sides of the saw
• Rip capacity from the blade side to 11-13/16” (300mm) and on the motor side
to 3-3/4” (95mm)
NOTE: For use with FJ561174 (TS 55 EQ) only.
FJ491469
B
Splinterguard
• Off-cut side and integrated rail splinter guard
• Plastic splinter guards for FJ56114 (TS 55 EQ) and FJ561188 (TS 75 EQ)
• Splinter free cross cuts in a single pass
FJ491473
Limit Stop
• Set stop points on the guide rail for repeat cuts and plunge cuts
• Adjustable placement along the entire rail, reduces kickback
NOTE: For use with FJ561174 (TS 55 EQ) and FJ561188 (TS 75 EQ) only.
FJ491582
D
Cover Plate
• Encloses blade housing for improved dust extraction when cutting vertically
or overhead
• Can also be used for creating architectural false joints
NOTE: For use with FJ561174 (TS 55 EQ) only.
FJ491750
E
Plug-It Power Cord
• Designed for use with Festool Circular Plunge Saw
• 13” long
• 16 gauge
NOTE: For use with FJ561174 (TS 55 EQ) and FJ561188 (TS 75 EQ) only.
FJ490656
Crown Stop With Base For Kapex KS 120 Miter Saw
• Adjustable stops support nested work pieces at any angle
• Provide enhanced material support to the left or right
NOTE: For use with FJ561287 (Kapex KS 120 EB) only.
FJ494369
C
F
A
B
C
D
E
Power Tools
Description
F
800-BUY-BAER (289-2237)
•
www.baersupply.com
•
Fax: 888-558-2237
V - 63
V Power Tools
MULTIFUNCTIONAL TABLES & ACCESSORIES
Multifunctional
Table
Multifunctional
Table
Kapex KS 120 EB
• Specially designed height and size for use with Kapex sliding
compound miter saw
• Brings work surfaces to the same level for stock support
NOTE: For use with FJ561287 (Kapex KS 120 EB) only.
Packing & Sold In: Each
Item#
FJ495565
• V-groove channels make adjustments both faster and easier
• Guide rail system: For use with the TS plunge saws and OF
routers; make cutoffs, angle cuts and compound cuts, use with
routers for dados and flutes
• System integration: For use with sawing, routing and clamping
• Grid hole pattern: Multiple holes in a uniform pattern are ideal
for clamping operations
• Includes:
- 2 each guide rail supports
- Angle unit (protractor head)
- Fence rail
- Fence rail clamp
- Adjustable stop
- Guide rail FS 1080
Packing & Sold In: Each
Item#
Power Tools
FJ495462
Table system
accessories
Clamping Element
table system
accessories
Ratcheting Quick Clamp
• Clamp material from the edges or sides using the grid
hole pattern for uninterrupted surfaces
• Works with square, round or irregular shaped material
• Pack of 2 each
NOTE: For use with Festool® guide rails and
multifunctional tables (MFT) only.
Packing & Sold In: Each
• Ratcheting mechanism allow for easy lock and quick release
and secure grip on material
• Utilizes bottom T-slot of guide rail for
limitless positioning
NOTE: For use with Festool® guide rails and
multifunctional tables (MFT) only.
Packing & Sold In: Each
Item#
Item#
FJ488030
FJ491594
Table system accessories
Guide Rail Screw Clamps
• Traditional screw clamp with head to be used in the bottom continuous T-slot of the guide rails to securely
clamp to material
• Clamping Thickness: 4-11/16” (120mm)
NOTE: For use with Festool® guide rails and multifunctional tables (MFT) only.
Packing & Sold In: 1 pack of 2 each. Full packs only.
Item#
FJ489570
V - 64
Würth Baer Supply Company
•
Over 40,000 products in-stock EVERYDAY!
Power Tools V
doweling & biscuit joiners
SAW DUST COLLECTOR
ChopShop Saw Hood
•
•
•
•
•
Can screw to a workbench or just drop in accessory mounting holes
Filters dust into a box or bucket instead of all over the job site
Protects saw when working outside in inclement weather
Works with chop saws, lathes, and wet saws
FASAWCLMP is for use with ChopShop Saw Hood when mounting to a tile, lathe, wet or miter saw that
doesn’t have holes for mounting in back (includes 2 brackets, enough to mount one saw)
Packing & Sold In: Each
Item#
Description
FASAWHOOD
Saw Hood
FASAWCLMP
Clamp
Joiner
Doweling
Joiner
Biscuits
• Freud model #: FDW710K
• Designed to drill dowel holes
• Tool works with bits from 3/16” to 1/2” (5mm to 12mm)
diameter, bits are spaced 32mm from center to center
• Adjustable fence with positive detents at 0, 22.5, 45 and
90 degrees
• Micro adjustable depth gauge with zero out feature for
quick and accurate depth adjustments
• Motor: 6.5 amps/18,500 RPMs
• Weight: 5.0 lb.
Packing & Sold In: Each
• Freud model #: JS104K
• Adjustable fence with positive detents at 0, 45 and
90 degrees
• High performance laser cut Freud blades
• Six depth setting with a maximum
depth of 20mm
• Motor: 6.5 amps/10.000 RPMs
• Weight: 6.8 lb.
Packing & Sold In: Each
Item#
ABJS104K
Item#
ABFDW710K
Joiner
Biscuits
• Porter Cable model #: 557
• Fence tilts from 0 to 135 degrees with positive adjustable
stop at 90 degrees
• Seven position rotating depth stop for FF, #0, #10, #20, biscuits
Simplex, Duplex, and Max (#6) biscuits
• Includes both 2” and 4” diameter blades for standard and
face-frame biscuits
• Motor: 7.0 amps/10,000 RPMs
• Weight: 7.5 lb.
Packing & Sold In: Each
• Virutex model #: AB11N
• Electronic control system maintains a constant speed,
allowing the user to make precise grooves with all varieties of wood
• Joiner can work on panels of 5/8”, 3/4”, and 7/8” thickness, but it is
possible to work on thicker pieces due to the movable fence
• Double insulation
• Input power: 900W
• Motor: 5 amps / 10,000 rpm
• Milling Blade: 3.94” x .86” x .156”
• Max slotting depth: 51/64”
• Weight: 7 lb.
• Carrying case included
Packing & Sold In: Each
Item#
Item#
Description
RK557
VXAB11
Biscuit Joiner
VXAB11B
Replacement Blade (3.94” diameter, 5/32”
thickness, 7/8” diameter of center hole)
800-BUY-BAER (289-2237)
•
www.baersupply.com
•
Fax: 888-558-2237
Power Tools
Joiner
Biscuits
V - 65
V Power Tools
biscuit joiners & accessories
Joiner
Biscuits
• Festool model #: DF500
• The system consists of the Domino joiner and pre-fabricated, beech and sipo Domino tenons
• Depth control - quick, precise adjustment for five different mortising depths relative to the size of the tenon required for the application
• Mortise width adjustment with rapid bit change – can change a bit in under 30 seconds
• Stepped height stop - 7 different step positions for different material thicknesses
• Pivoting fence creates angled mortises from 0-90° with positive stops at 22.5°, 45°, 67.5°
• Carbide tip spiral bit long lasting bit withstands 5,000 – 14,000 joints depending on material
• Dust extraction
• Cutter spindle speed: 24,300 rpm. Domino slot cutter diameter: 5/6/8/10 mm
• Miter routing: 0-90°; stop positions at 0°, 22.5°, 45°, 67.5°, 90°
• Movable stepped stop: 16/20/22/25/28/36/40 mm
• Power consumptions: 420W
• Routing depth stop: 12/15/20/25/28 mm. Routing height adjuster with scale: 5-30 mm
• Weight: 7 lb.
• Includes: Domino Cutter D5 (493490), Plug-It Power Cord, Support Bracket, Wrench, and Systainer 2 (445434)
Packing & Sold In: Each
Item#
FJ574307
joiner accessories
NOTE: For use with Festool® Domino DF 500 Joiner only.
Packing & Sold In: Each
Description
Item#
Domino Cutters - NOTE: For use with FJ574307 (Domino® DF 500 Joiner) only.
A
Tenon Size: 5mm
FJ493490
Tenon Size: 6mm
FJ493491
Tenon Size: 8mm
FJ493492
Tenon Size: 10mm
FJ493493
A
Power Tools
Domino Tenons For Indoor & Outdoor Applications
• Beech Domino® tenons for indoor applications
• Sipo Domino tenons for outdoor applications
NOTE: For use with FJ574307 (Domino® DF 500 Joiners) only.
B
C
V - 66
5mm Thickness x 19mm Width x 30mm Length (1,800 per pack) - Indoor
FJ493296
5mm Thickness x 19mm Width x 30mm Length (900 per pack) - Outdoor
FJ494859
6mm Thickness x 20mm Width x 40mm Length (1,140 per pack) - Indoor
FJ493297
6mm Thickness x 20mm Width x 40mm Length (570 per pack) - Outdoor
FJ494860
8mm Thickness x 22mm Width x 40mm Length (780 per pack) - Indoor
FJ493298
8mm Thickness x 22mm Width x 40mm Length (390 per pack) - Outdoor
FJ494861
8mm Thickness x 22mm Width x 40mm Length (130 per pack) - Indoor
FJ494940
8mm Thickness x 22mm Width x 50mm Length (600 per pack) - Indoor
FJ493299
8mm Thickness x 22mm Width x 50mm Length (300 per pack) - Outdoor
FJ494862
8mm Thickness x 22mm Width x 50mm Length (100 per pack) - Indoor
FJ494941
10mm Thickness x 24mm Width x 50mm Length (510 per pack) - Indoor
FJ493300
10mm Thickness x 24mm Width x 50mm Length (225 per pack) - Outdoor
FJ494863
Domino Systainer Assortment
• Includes: All 4 Domino Cutters, Beech Domino Tenons (1105 total): (600) 5x30,
(190) 6x40, (130) 8x40, (100) 8x50, (85) 10x50, In Systainer 2 (445434)
•
NOTE: For use with FJ574307 (Domino® DF 500 Joiners) only
FJ493301
Würth Baer Supply Company
B
C
Over 40,000 products in-stock EVERYDAY!
Power Tools V
jig saws
Jig Saw, Electric powered
Heavy Duty - Variable Speed
• Freud model #: FJ85K
• Electronic cruise control – speed remains constant under
different loads
• Quick-fix blade change system, tool free changing of blades
• Non-marring base attachment with anti-splintering insert
• Variable speed and 4 orbital settings
• Built-in dust collection port
• Motor: 6 amps / 120vac
• Speed control: electronic cruise control
• Stroke length: 1”
• Strokes Per Minute: 500 to 3000
• Max Cutting depth: 2-3/8”
• Blades: accepts Bosch type shanks
• Weight: 5.4 lb.
• Includes: carrying case
Packing & Sold In: Each
Item#
ABFJ85K
Jig Saw, Electric powered
Barrel Grip & Top Handle
Designs - Variable Speed
Item#
• Festool model #: PSB 300 EQ
• Variable stroke - Four unique stroke settings vary from straight
plunge action for smooth cuts to aggressive orbital action for
rapid cuts
• Carbide guidance system - rigidly supports the blade at exactly
the pre-set angle, reducing blade wander in tight radius cuts;
eliminating cutting errors
• MMC electronics - soft-start to soften start-up jolts, variable
speed control, constant speed under load
• Fastfix blade changing system allows for quick, tool-free blade
changes
• Solid one-piece splinterguard mounts in the foot of the tool for
zero-clearance
• Dual bevel base - 45° dual bevel for angled cuts & a zero degree
detent for perpendicular cuts
• Non-marring sub-base
• Dual port dust extraction and chip deflector
• Stroke adjustment: 4 Stages
• Strokes Per Minute (1”): 1,000 to 2,900
• Bevel Angle Range: 0 to 45 degrees
• Max cutting depth non-ferrous metals: 3/4”, soft steel: 3/8”,
wood: 4-3/4”
• Power: 6 amps, 120vac
• Watts: 720
• Weight: 5.06 lb.
• Includes: Chip Guard (453491), Multi-Purpose Wood Saw Blades
(486551, 486563), Plug-It Power Cord, Splinterguard (490120),
In Systainer 1 (445433)
Packing & Sold In: Each
Item#
FJ561123
Power Tools
• Bosch model #’s: 1584AVSK and 1587AVSP-1
• Patented tool-free blade change out system makes for fast and
easy blade changes
• T-shank blade clamp mechanism eliminates play and vibration
• Three position variable speed dial allows user to match tool
speed to work piece
• Footplate tilts up to 45 degrees
• Motor: 5.0 amp
• Speed / Strokes per minute: 500 to 3,100
• Overall length: 10-5/8”
• Weight: 5.5 lb.
• Includes: Both jig saws come with 3 blades and plastic carrying case
Packing & Sold In: Each
Jig Saw,
Electric powered
D-Handle Grip, Variable Speed
Description
BL1584AVSK
Jigsaw Kit
BL1587AVSK
Top Handle Jig Saw
BL1584AVSK
800-BUY-BAER (289-2237)
BL1587AVSK
•
www.baersupply.com
•
Fax: 888-558-2237
V - 67
V Power Tools
jig saws & accessories
Jig SaW, Electric powered
Barrel Grip Design, Variable Speed
• Festool model #: PS 300 EQ
• Variable stroke, four unique stroke settings vary from straight plunge for smooth cuts to aggressive orbital action for rapid cuts
• Carbide guidance system - rigidly supports the blade at exactly the pre-set angle, reducing blade wander in tight
radius cuts; eliminating cutting errors
• MMC electronics - soft-start to soften start-up jolts, variable speed control, constant speed under load
• Fastfix blade changing system allows for quick, tool-free blade changes
• Solid one-piece splinterguard mounts in the foot of the tool for zero-clearance
• Dual bevel base - 45° dual bevel for angled cuts & a zero degree detent for perpendicular cuts
• Non-marring sub-base
• Dual port dust extraction and chip deflector
• Stroke adjustment: 4 Stages with 1,000 to 2,900 strokes per minute at 1”
• Bevel Angle Range: 0 to 45 degrees
• Max cutting depth non-ferrous metals: 3/4”, soft steel: 3/8”, wood: 4-3/4”
• Power: 6 amps, 120vac
• Watts: 720
• Weight: 5.06 lb.
• Includes: Chip Guard (453491), Multi-Purpose Wood Saw Blades (486551, 486563),
Plug-It Power Cord, Splinterguard (490120), In Systainer 1 (445433)
Packing & Sold In: Each
Item#
FJ561097
jig saw accessories
NOTE: For use with FJ561097 (PS 300 EQ) and FJ561123 (PSB 300 EQ) Jig Saws only.
Packing & Sold In: Each
Description
A
Power Tools
B
V - 68
Item#
Guide Stop
• Guide your jigsaw with any length guide rail for straight repeatable cuts
A
FJ490031
Splinterguard
• Solid one piece splinter guard
• Custom cut for each blade
• Prevents splintering
Splinterguard 5 pack
FJ490120
Splinterguard 20 pack
FJ490121
C
Chip Guard
• Provides a clear view of the work piece
• Helps to capture flying chips
• Used to maximize dust extraction
FJ453491
D
Plug-It Power Cord
• Designed for use with Festool Jig Saws
• 13” long
• 18 gauge
FJ490649
Würth Baer Supply Company
•
B
C
D
Over 40,000 products in-stock EVERYDAY!
Power Tools V
air powered & cordless drills
drill, air powered
1/4” Reversible
Drill, Air Powered
3/8” Reversible
• Speed (RPM): 1,800
• Air Inlet (NPT): 1/4”
• Hose Size (ID): 3/8”
• Air Pressure (PSI): 90
• Air Consumption (CFM): 4
• Length: 7”
• Weight: 2.50 lb.
Packing & Sold In: Each
• Speed (RPM): 1,800
• Air Inlet (NPT): 1/4”
• Hose Size (ID): 3/8”
• Air Pressure (PSI): 90
• Air Consumption (CFM): 4
• Spindle Thread: 3/8”-24
• Length: 6.5”
• Weight: 3 lb.
Packing & Sold In: Each
Clutch Type
Torque
TCSM802
Adjustable Clutch
25”, 145 lb.
TCSM804
Positive Clutch
115 lb.
Item#
TCSM705
drill, cordless
Bosch PS20-2
drill, cordless
Bosch PS10-2
• 80 in.- lb. of torque , drives 100 3” screws per battery charge
• Ultra compact power & design, almost half the size of a 12V
compact drill/driver
• LED light for tight spaces and applications
• Forward/reverse button
• Quick change chuck prevents bit loss in drill or drive
mode - pull to insert or release 1/4” hex shank bits
• 10+1 clutch, enables precision driving and eliminates over
torque in soft base materials; Max mode allows pilot and
other small bore holes
• Variable speed trigger
• Includes: (1) carrying case,
(2) 1.5” power drive bits, (1) 30
minute charger, (2) Litheon™
10.8V Batteries
Packing & Sold In: Each
• 80 in.-lb. of torque, drives 100 3” screws per battery
charge
• Ultra-compact 3.5” total head length
• 90-degree articulating head rotates and locks
into five positions for increased versatility
• 7+1 electronic clutch with precision driving,
eliminates over torque in soft base materials;
Drill mode allows pilot and other small bore holes
• Forward/reverse button
• Quick change chuck prevents bit loss in drill or
drive mode, pull to insert or release 1/4” hex shank bits
• Storage hanger
• Variable speed trigger
• Includes: (1) Carrying Case, (2) 1.5” Power Drive Bits,
(1) 30 Minute Charger, (2) Litheon™ 10.8V Batteries
Packing & Sold In: Each
Item#
Item#
BLPS20-2
BLPS10-2
drill, CORDLESS
Brute Tough™
• 50 in.-lbs more torque, 200 RPM faster, over three times longer life than previous generation
• New 1/2” Metal Chuck increased durability and 25% more grip force than previous generation
• Durashield™ Housing & unibody powertrain provide optimum reinforcement to withstand real world conditions
• New Two Speed Gearbox: High torque mode produces over 550 in.-lb. (Dynamic Torque)
• High speed mode produces 1,700 RPM
• High Strength Metal Collar - Enhances durability and protects tool when dropped on the chuck
• Newly Designed Powertrain and Gears - For increased life and durability
Item#
• 25 Position Clutch
• Variable speed trigger - For complete control
BL35614
• Externally Accessible Brushes - For brush replacement in as little as 2 minutes
• Ergonomic two-tone soft grip handle - For extended comfort and control
Includes: (2) 2.0A-h Batteries - BAT140, (1) 30-Minute Single Bay Charger - BC130, (1) Magnetic Bit Holder - 2610917319, Phillips Drive
Bit Included and Side Handle/Carrying Case
800-BUY-BAER
(289-2237) •
• Fax: 888-558-2237
Packing
& Sold In: Each
www.baersupply.com
Power Tools
Item#
V - 69
V Power Tools
cordless drills
drill, CORDLESS
TDK Cordless Drill Set
• Includes:
- 1 TDK 15.6 drill
- 2 NiCD 2.4 Ah battery packs
- LC 45 charger
- Centrotec chuck (492135) with starter set including 4mm wood drill, Phillips 2 bit and Centrotec bit holder/adapter
- FastFix (quick connect) straight chuck (490698)
Item#
- FastFix (quick connect) right angle (490293) and eccentric (490294) chucks
FJPTDK15S
Packing & Sold In: Each
drill, cordless
C12 Cordless Drill
Power Tools
• High power batteries with smart charger for long service life
• Motor design allows short drill head for compactness
• EC-TEC motor without carbon brushes produces virtually no mechanical wear
• Stepless electronic speed control for work in any material
• Soft grip for comfort on long jobs. Good center of gravity for long jobs
• On-board magnetic bit holder
• Takes Centrotec and FastFix chucks
• Spring contacts are cleaned automatically every time the battery pack is slotted into position
• Charging Time: 25 minutes
Item#
• Includes : (2) NiCad 1.3 Ah battery packs (493348), LC 45 charger (492138),
FJ564178
Centrotec chuck(492135) with starter set including 4mm
FJ564179
wood drill, Phillips 2 bit and Centrotec bit holder/adapter, FastFix (quick connect)
FJ564180
straight chuck (490698) and In Systainer 1 (445433)
Packing & Sold In: Each
NiCD 1.3 Ah
NiCD 2.4 Ah
NiMH 3.0 Ah
drill, cordless
Industrial C12 Drill Set
drill, cordless
C12 Cordless Drill Set
• High power batteries with smart charger for long service life
• New motor design allows short drill head for compactness
• EC-TEC motor without carbon brushes produces virtually no
mechanical wear
• Stepless electronic speed control for work in any material
• Soft grip for comfort on long jobs
• Good center of gravity for long jobs
• On-board magnetic bit holder
• Takes Centrotec and FastFix chucks
• The spring contacts are cleaned automatically every time the
battery pack is slotted into position
• Includes:
- (5) C12 Drills
- (5) 1.3 Ah, NiCD batteries
- (5) Centrotec chucks
- (5) FastFix chucks
- (8) NiCD batteries
- (3) Chargers
Packing: Each
• High power batteries with smart charger for long service life
• New motor design allows short drill head for compactness
• EC-TEC motor without carbon brushes produces virtually no
mechanical wear
• Stepless electronic speed control for work in any material
• Soft grip for comfort on long jobs
• Good center of gravity for long jobs
• On-board magnetic bit holder
• Takes Centrotec and FastFix chucks
• The spring contacts are cleaned
automatically every time the battery pack
is slotted into position
• Includes: (2) NiCad 1.3 Ah battery packs
(493348), LC 45 charger (492138), Centrotec
chuck (492135) with starter set including 4mm wood drill, Phillips
2 bit and Centrotec bit holder/adapter, FastFix (quick connect)
straight chuck (490698), FastFix (quick connect) right angle
(490293) and eccentric (490294) chucks, In Systainer 1 (445433)
Packing & Sold In: Each
Item#
FJPC12135
V - 70
Battery Type
Item#
Battery Type
NiCD 1.3 Ah
Würth Baer Supply Company
•
Battery Type
Includes
FJPC1213S
NiCD 1.3 Ah
(2) NICAD 1.3 Battery Pack
FJPC1224S
NiCD 2.4 Ah
(2) NICDA 2.4 Battery Pack
FJPC1230S
NiCD 3.0 Ah
(2) NICAD 3.0 Battery Pack
Over 40,000 products in-stock EVERYDAY!
Power Tools V
drill accessories
drill accessories
Right Angle Drill Attachment Magnetic 1/4” Bit Mount with
Quick- Change Chuck
• Suitable for use with electric drills and battery operated driver drills
• Specially hardened steel enables maximum torque with a maximum speed of 2,000 RPM’s
• Secure hold and 360˚ step-free adjustable handle
• Suited for screwing in cramped and hard-to-reach places
Packing & Sold In: Each
Item#
WW6149000
Size
6.5” L x 1.26” W x 1.97” H
drill accessories
NOTE: For use with FJ574266 (OF 1010 EQ) and FJ574267 (OF 1400 EQ) Drills only.
Packing & Sold In: Each
Description
Item#
A
Fastfix Depth Stop Chuck
• Integral clutch maintains depth independent of torque setting
• Quick-out ring backs out screws without affecting depth setting
NOTE: For FJ564178 and FJ564179 (C 12) only.
FJ493539
B
Fastfix Eccentric Chuck
• Offset chuck places bit flush to side, lets you drill or drive right into corners
• Chuck rotates 360 degrees, with 16 presets
• Quick-release collar won’t mar adjoining surfaces
FJ490294
C
Fastfix Right Angle Chuck
• Right angle chuck for close quarters
• 1/4” Hex drive with wire detent, also accepts Centrotec® or keyless chuck
• Chuck rotates 360 degrees, with 16 presets
FJ490293
A
B
C
D
D
Battery Pack
• Battery pack for CDD (NiCd) 12 volt, 2.0 Ah
FJ488438
E
Centrotec Bit Holder BH 60
• Magnetic bit holder, lets you use standard bits with Centrotec chuck
• Also compatible with standard chuck
• 2-3/8” Length
FJ492539
F
LR 32 Hole Drilling Set
• Includes: Guide plate, centering mandrel, linear stops and two edge stops for
drilling
• European 32mm grid pattern holes in shelves and cabinets
FJ583290
800-BUY-BAER (289-2237)
•
www.baersupply.com
Power Tools
E
F
•
Fax: 888-558-2237
V - 71
V Power Tools
DRILL ACCESSORIES
drill accessories
Decorative Hardware Jig
For Cabinet Doors
drill accessories
Decorative Hardware Jig
For Cabinet Drawers
• Adjusts horizontally and vertically
• Reversible for right/left, upper/lower
doors
• Used for knobs and 3”, 3-1/2” or 4”
center pulls
Packing & Sold In: Each
• Works on all sizes of cabinet drawer
• Adjusts horizontally and vertically
• Alignment arrows on face & notches on slide &
frame for quick set-up
• Used for knobs and 3”, 3-1/2” or
4” center pulls
Packing & Sold In: Each
Item#
EJ1000
Item#
EJ2000
drill accessories
Decorative Hardware Jig
Metric Insert
drill accessories
Drill Guide Shelf Pin
• Insert for door & drawer jigs
• Used for 96mm & 128mm center
handles
• Alignment notches on slide for
quick set-up
Packing & Sold In: Each
For line boring with a hand held drill
• Made of anodized aluminum
• Replaceable hardened steel drill bushings
• Adjustable stops for custom drilling as needed
• Bar length is 34” long and has 25 drill bushings
Packing & Sold In: Each
Item#
EJ1500M
Item#
Power Tools
drill accessories
Drill Guide
For accurate alignment and centering of handles and knobs.
Guide line on fence assures accurate centering.
• Made of anodized aluminum
• Replaceable hardened steel drill bushings (AR101B)
• Adjustable hole centers for handles
• Uses standard 3/16” drill bit
Packing: As shown below.
Sold In: Full box quantities only.
Item#
ARDG101
AR101B
V - 72
Description
Box Qty
Drill Guide
1
Repl. Bushings
4
Würth Baer Supply Company
Description
ARDG102
1/4” drill bushings on 1.25” centers
ARDG103
5 mm drill bushings on 32 mm centers
drill accessories
Precision Drill Guide
• For use with 3/8” and 1/2” power drills
• Includes 3/8” capacity chuck with key
• Protractor scale adjusts body from 0-45 degrees left and right,
in 5 degree increments
• V-Guides for drilling through
rounded stock or dowel
• Positive stop for accurate drill depth
• Centering channel on base for
edge drilling
• Includes 1/4”, 5/16” & 3/8” Brad
Point Bits
• Folds flat for storage
Packing & Sold In: Each
Item#
GH36-37
•
Over 40,000 products in-stock EVERYDAY!
Power Tools V
AIR COMPRESSORS & AIR HOSES
air compressor, Electric powered
3 Gallon, 1 HP Hand Carry
• Bosch model #: CET3-10
• Vertically angled tanks that are ergonomically balanced for comfort
• EZ Drain System for fast efficient draining
• Recessed control panel and roll cage protect components from damage
• Powerful and quiet induction motor - 4 pole induction motor with a dBA of 72
• Power: 1 HP, 1700 RPM
• CFM @ 100 PSI: 2.6
• Tank Capacity: 3 gallons
• Recovery Time: 14 seconds
• Dimensions: 16.25”H x 16”L x 17”W
Item#
• Weight: 57.3 lb.
BLCET3-10
• Compressor comes with oil in the pump
Packing & Sold In: Each
air compressor,
Electric powered
5.2 Gallon, 2.5 HP Hand Carry
air compressor,
Electric powered
4 Gallon, 2 HP Hand Carry
• Senco model #: PC1108
• Compressor has (2) universal couplers for operating two tools
• Direct drive motor
• Cold weather start-up valve
• Wheel barrow tank configuration
• Oil-splash lubrication
• Oversized pneumatic wheels for easy maneuvering
• Power: 2.5 HP, 13 amps
• Max Pressure: 150 psi
• Tank Capacity: 5.2 gallons
• Recovery Time: 24 seconds (120-150 psi)
• Pump Up Time: 90 seconds (0-150 psi)
• Dimensions: 19”H x 28”L
• Weight: 88 lb.
• Compressor includes oil
Packing & Sold In: Each
• Bosch model #: CET4-20
• Vertically angled tanks that are ergonomically balanced for
comfort
• EZ Drain System for fast efficient draining
• Recessed control panel and roll cage protect components
from damage
• Powerful and quiet induction motor - 24 pole induction
motor with a dBA of 80
• Power: 2 HP, 3400 RPM
• CFM @ 100 PSI: 4.2
• Tank Capacity: 4 gallons
• Recovery Time: 10 seconds
• Dimensions:
19.75”H x 16.25”L x 7.75”W
• Weight: 84.9 lb.
• Compressor comes with oil
in the pump
Packing & Sold In: Each
Item#
SNPC1108
Power Tools
Item#
BLCET4-20
Air Hose
Re-Koil, Polyurethane
• Most flexible of all re-koil hoses, has excellent shape retention
• Resists abrasions, corrosive materials, oil & grease
• Completely assembled with 18” straight hose whip with swivel fittings on both ends
• Maximum working pressure: 125 PSI @ 70° F
Item#
Hose I.D.
• Working temperature: -50° F to 180° F (-46° C to 82° C)
MF1671-10
1/4”
• Yellow color
Packing & Sold In: Each
MF1671-20
1/4”
800-BUY-BAER (289-2237)
•
Length
Swivel Male NPT
10’
1/4”
20’
1/4”
MF1673-20
1/4” • Fax:
30’ 888-558-2237
1/4”
www.baersupply.com
V - 73
V Power Tools
air hoses & couplers
POLYURETHANE AIR HOSE
Field Repairable
Air Hose
Re-Koil, Nylon
• Lightweight and tough
• Strain relief ends incorporate a built-in
reusable fitting, which makes these hoses
field repairable
• Retains flexibility in subzero temperatures
(down to -40° F)
• UV stabilized for longer outdoor service life
• Resistant to lubricating oils, greases and abrasion
• Made in the USA
Packing & Sold In: Each
• Assembled with re-usable, full flow male NPT swivel
fittings on both ends to avoid twisting and kinking
• Resists abrasions
• Maximum working pressure: 200 PSI @ 70° F
• Working temperature: -40° F to 180° F (-38° C to 82° C)
• Yellow color
Packing & Sold In: Each
Item#
Hose I.D
Length
Fittings, NPT
WW69991425
1/4”
25’
1/4”
WW69991450
1/4”
50’
1/4”
WW69993825
3/8”
25’
1/4”
Item#
WW69993850
3/8”
50’
1/4”
WW699938251
3/8”
25’
3/8”
WW699938501
3/8”
50’
3/8”
Hose I.D.
Length
Swivel Male
NPT
MF1667
1/4”
12’
1/4”
MF1669
1/4”
25’
1/4”
Air Hose
EPDM 2 Braid, Rubber
• Deluxe heavy duty EPDM rubber is designed for tough service station and shop applications
• Kink resistant and flexible in extreme temperatures, resists abrasion, weathering and ozone
• Limited oil resistance
• Maximum working pressure: 250 PSI
• Burst pressure: 1000 PSI
• Working temperature:-40° F to 190° F (-38°C to 87° C)
• EPDM rubber tube & cover, spiral synthetic yarn reinforcement
• Red in color
Packing: 25’ hose comes coupled with brass fittings 100’ bulk hose comes without fittings in a dispensing box
Power Tools
Item#
V - 74
Hose I.D.
Length
Fittings, NPT
Hose O.D.
MF1630
1/4”
25’
Male, 1/4” both ends
-
MF1632
3/8”
25’
Male, 3/8” both ends
-
MF1630-100
1/4”
100’
-
5/8”
Air Couplers
“Kwik Change” M Style
• Coupler bodies are brass with brass sleeves
• Maximum inlet pressure: 300 PSI
• Maximum temperature: 250° F
• Air flow: 40 SCFM
• Seals: Buna-N
Packing: As shown below.
Sold In: Both broken and full box quantities.
Discount available for full box orders.
Item#
Connection
Box Qty
MF715
1/4” NPT Female
10
MF716
1/4” NPT Male
10
MF717
1/4” Hose Barb
10
MF718
3/8” NPT Female
10
MF719
3/8” NPT Male
10
Würth Baer Supply Company
•
1/4”
Hose
Barb
NPT Female
and Male
Over 40,000 products in-stock EVERYDAY!
Power Tools V
AIR HOSE accessorieS
air hose accessories
Male Hex Nipple
air hose accessories
Female Hex Coupling
Packing: As shown below.
Sold In: Both broken and full box quantities.
Discount available for full box orders.
Packing: As shown below.
Sold In: Both broken and full box quantities.
Discount available for full box orders.
Item#
Thread Size
Box Qty
Item#
Thread Size
Box Qty
MF646
1/4” NPT x 1/4” NPT
10
MF643
1/4” NPT x 1/4” NPT
10
• Composite-style design provides maximum air flow to tools.
• Easy connect/disconnect by single push-button action.
• Shock-proof, low-vibration, crush-resistant
• Lightweight 1.4 oz., non-marring composite material
Packing & Sold In: Each
Item#
DY94980
air hose accessories
Full Swivel Hose End
• Full 360° swivel hose ends help eliminate kink and
twisted airlines
• Steel construction, black oxide finish
Packing: As shown below.
Sold In: Both broken and full box quantities.
Discount available for full box orders.
Item#
NPT
NPT or I.D.
Box Qty
MF659
1/4” Male End
1/4” NPT Female
Swivel End
10
Packing: As shown below.
Sold In: Both broken and full box quantities.
Discount available for full box orders.
MF1602
Min I.D
Closed
Max O.D.
Opened
Band
Width
Box Qty
7/32”
5/8”
5/16”
10
800-BUY-BAER (289-2237)
•
• Plugs are case hardened steel, plated to resist rust
• Maximum inlet pressure: 300 PSI
• Maximum temperature: 250° F
• Air flow: 40 SCFM
• Seals: Buna-N
Packing: As shown below.
Sold In: Both broken and full box quantities.
Discount available for full box orders.
Item#
Connection
Box Qty
MF727
1/4” NPT Male
10
MF728
1/4” NPT Female
10
MF732
3/8” NPT Female
10
MF733
3/8” NPT Male
10
MF736
1/4” Hose Barb
10
air hose
accessories
Brass Hose Ends
Packing: As shown below.
Sold In: Both broken and full box quantities.
Discount available for full box orders.
air hose accessories
Stainless Steel Worm Drive
Hose Clamps
Item#
air hose accessories
Air Plugs “Kwik Change”
M-Style
Item#
Type
Hose
I.D.
Thread
Box
Qty
MF600
Male
1/4”
1/4” NPT
10
MF602
Male
3/8”
1/4” NPT
10
MF605
Female,
Non-Swivel
1/4”
1/4” NPT
10
MF605-2
Female,
Non-Swivel
3/8”
1/4” NPT
10
www.baersupply.com
•
Fax: 888-558-2237
Power Tools
Composite-Style Coupler
1/4” Male
V - 75
V Power Tools
air compressor ACCESSORIES
Composite Dynaswivel
1/4” NPT
Air Hose Repair Kits
For 1/4” Air Hose
• For use with most air tools: grinders, sanders,
staple guns, drills, etc.
• Universal-joint connects portable air tools to an air line
• Improves tool maneuverability, minimizes operator
fatigue and extends hose life
• Swivels 360deg at 2 pivot points allowing the air hose to
drop directly to the floor while providing superb
tool handling
Packing & Sold In: Each
• Includes: 1 each #699 1/4” female air chuck; 1 each #663
1/4” NPT x 1/4” ID male hose end; 1 each #676 1/4” ID hose
mender; 3 each #1602 Hose clamps for 5/8” OD hose
WARNING: Kit includes a
sealing type chuck that is not
for use on Milton inflator gages
Packing & Sold In: Each
Item#
DY94300
Item#
MF620
Air Flow Range (LPM)
Up to 33 SCFM (935)
air Hose accessories
3 In 1 Air Manifolds
Air Tool Lubricant
• Use 2-3 drops at the end of each day,
or as needed, to maintain tool
performance
• 4 fl oz bottle
Packing & Sold In: Each
• Supply 3 air tools from a single inlet
• No need to disconnect and connect
for every tool change
• Sturdy, lightweight aluminum body
Packing & Sold In: Each
Item#
MM20451
Item#
MFS685-6
Inlet NPT
Female
3 Outlets NPT
Female
3/8”
1/4”
Power Tools
Compressor
accessories
Pump Oil
• Premium grade oils formulated with high-quality
paraffin distillate stocks
• Contains an effective antifoamant, rust and
oxidation inhibitor
Packing: As shown below.
Sold In: Both broken and full box quantities.
Discount for full box orders.
• Premium grade oils formulated with high quality
naphthenic distillate stocks
• Recommended for all oil splash compressors
• Protects against corrosion
Packing: Both broken and full box quantities.
Sold In: Discount available for full box orders.
Item#
LLPC344
V - 76
Air Tool Lubricating
Oil
Size
Box Qty
32 fl. oz.
12
Würth Baer Supply Company
Item#
LLPC102
•
Size
Box Qty
32 fl. oz.
12
Over 40,000 products in-stock EVERYDAY!
Power Tools V
edgebanding systems
Egdebander
Hand Held, Hot Air
• The only manual bander with tracking of tape on the board
• For pre-glued PVC, polyester, melamine, and wood veneer of up to 2” wide (50mm)
• A set of rubber clamps hug the board so you can get the most accurate tracking of the tape on the board
• Easy adjustment and application on contour edge banding
• Minimum interior radius: 2”
• Two step temperature switch:
- Step one: 300˚C or 570˚F
- Step two: 525˚C or 1,000˚F
• Air delivery: 400 L/min. or 16 CV. feet/min.
• Set up time of less than 1 minute
• Weight: 6 lb. (2.7 kg)
Packing & Sold In: Each
Item#
VXAG98
EdgeBanding System
• Can handle hot-melt adhesive wood and polyester edge banding and comes
complete with a heavy-duty industrial heat gun
• The guides are completely adjustable and will accommodate materials as wide as 2-1/4”
• Capable of applying edge banding to straight and curved edges
Packing & Sold In: Each
Item#
Power Tools
ABEB100
800-BUY-BAER (289-2237)
•
www.baersupply.com
•
Fax: 888-558-2237
V - 77