Alpine CDE9843 Owner`s manual

R
MP3/WMA CD Receiver
CDE-9845
EN
MP3 CD Receiver
FR
CDE-9843
ES
FM/AM CD Receiver
CDE-9841
• OWNER'S MANUAL
Please read before using this equipment.
• MODE D'EMPLOI
Veuillez lire avant d’utiliser cet appareil.
• MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
ALPINE ELECTRONICS MARKETING, INC.
1-1-8 Nishi Gotanda,
Shinagawa-ku,
Tokyo 141-0031, Japan
Phone 03-5496-8231
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF CANADA, INC.
7300 Warden Ave., Suite 203, Markham,
Ontario L3R 9Z6, Canada
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
6-8 Fiveways Boulevarde Keysborough,
Victoria 3173, Australia
Phone 03-9769-0000
ALPINE ELECTRONICS GmbH
Frankfurter Ring 117
80807 München, Germany
Phone 089-32 42 640
ALPINE ELECTRONICS OF U.K. LTD.
Alpine House
Fletchamstead Highway, Coventry CV4 9TW, U.K.
Phone 0870-33 33 763
Meiyi Printing Factory, Dalian, China
No. 28 Chang Qing Street, Xi Gang District, Dalian, China
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 338 101 280)
98, Rue de la Belle Etoile, Z.I. Paris Nord Il,
B.P. 50016, 95945 Roissy Charles de Gaulle
Cedex, France
Phone 01-48638989
ALPINE ITALIA S.p.A.
Viale C. Colombo 8, 20090 Trezzano
Sul Naviglio (MI), Italy
Phone 02-484781
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal de Gamarra 36, Pabellón, 32
01013 Vitoria (Alava)-APDO 133, Spain
Phone 945-283588
Designed by ALPINE Japan
Printed in China (Y)
68-00493Z95-A
ENGLISH
Contents
Operating Instructions
WARNING
WARNING .................................................. 2
CAUTION ................................................... 2
PRECAUTIONS ......................................... 2
Getting Started
Turning Power On and Off ............................... 5
Detaching and Attaching the Front Panel ......... 5
Initial System Start-Up ..................................... 5
Adjusting Volume ............................................. 5
Lowering Volume Quickly ................................ 5
Radio
Changing the Radio Frequencies for each
Country (CDE-9845/CDE-9843 only) .......... 6
Listening to Radio ............................................. 6
Manual Storing of Station Presets .................... 6
Automatic Memory of Station Presets .............. 7
Tuning to Preset Stations .................................. 7
Station Title Search Function
(CDE-9845 only) ........................................... 7
Frequency Search Function
(CDE-9845 only) ........................................... 7
CD/MP3/WMA
Playback ............................................................ 8
Repeat Play ....................................................... 9
M.I.X. (Random Play) ...................................... 9
Scanning Programmes ...................................... 9
Searching CD Text
(CDE-9845/CDE-9843 only) ........................ 9
File/Folder Name Search (concerning MP3/
WMA) (CDE-9845/CDE-9843 only) .......... 10
Quick Search (CDE-9845/CDE-9843 only) ... 10
About MP3/WMA
(CDE-9845/CDE-9843 only) ...................... 10
Sound Setting
Adjusting Bass/Treble/Balance (Between Left
and Right)/Fader (Between Front and Rear)/
Defeat .......................................................... 12
Setting the Bass Control ................................. 12
Setting the Treble Control ............................... 13
Setting the BBE Mode (CDE-9845 only) ....... 13
Turning Loudness On/Off
(CDE-9843/CDE-9841 only) ...................... 13
Other Functions
Displaying the Title/Text ................................. 14
Titling Discs/Radio Stations ........................... 15
Erasing Disc Title/Radio Station Title ............ 15
Displaying Time .............................................. 15
Setting Time .................................................... 15
SETUP
Sound Customizing
Subwoofer On and Off .................................... 16
Visual Customizing (CDE-9845/CDE-9843 only)
Setting the Multicolor Illumination
(CDE-9845 only) ......................................... 17
Dimmer Control
(CDE-9845/CDE-9843 only) ....................... 17
Scroll Type Setting
(CDE-9845/CDE-9843 only) ...................... 17
Scroll Setting (CDE-9845/CDE-9843 only) ... 17
Demonstration (CDE-9845 only) .................... 17
MP3/WMA (CDE-9845/CDE-9843 only)
Playing MP3/WMA Data
(CDE-9845/CDE-9843 only) ...................... 17
External Device
Setting the AUX Mode (CDE-9845 only) ....... 17
Connecting to an External Amplifier .............. 17
Information
In Case of Difficulty ....................................... 18
Specifications .................................................. 19
Installation and Connections
Warning ........................................................... 20
Caution ............................................................ 20
Precautions ...................................................... 20
Installation ...................................................... 21
Connections .................................................... 22
LIMITED WARRANTY
Windows Media and the Windows logo are trademarks, or
registered trademarks of Microsoft Corporation in the United
States and /or other countries.
1-EN
Operating Instructions
WARNING
WARNING
This symbol means important instructions. Failure
to heed them can result in serious injury or death.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR
ATTENTION AWAY FROM SAFELY DRIVING YOUR
VEHICLE.
Any function that requires your prolonged attention should only
be performed after coming to a complete stop. Always stop the
vehicle in a safe location before performing these functions.
Failure to do so may result in an accident.
CAUTION
This symbol means important instructions. Failure
to heed them can result in injury or material
property damage.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to the
product. Return it to your authorized Alpine dealer or the nearest
Alpine Service Centre for repairing.
PRECAUTIONS
Product Cleaning
Failure to do so may result in an accident.
Use a soft dry cloth for periodic cleaning of the product. For
more severe stains, please dampen the cloth with water only.
Anything else has the chance of dissolving the paint or damaging
the plastic.
MINIMIZE DISPLAY VIEWING WHILE DRIVING.
Temperature
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL
HEAR OUTSIDE NOISE WHILE DRIVING.
Viewing the display may distract the driver from looking ahead of
the vehicle and cause an accident.
DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, fire or electric shock.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
Be sure the temperature inside the vehicle is between +60°C
(+140°F) and –10°C (+14°F) before turning your unit on.
Moisture Condensation
You may notice the CD playback sound wavering due to
condensation. If this happens, remove the disc from the player
and wait about an hour for the moisture to evaporate.
Damaged Disc
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE
REACH OF CHILDREN.
Do not attempt to play cracked, warped, or damaged discs.
Playing a bad disc could severely damage the playback
mechanism.
Swallowing them may result in serious injury. If swallowed,
consult a physician immediately.
Maintenance
USE THE CORRECT AMPERE RATING WHEN REPLACING
FUSES.
If you have problems, do not attempt to repair the unit yourself.
Return it to your Alpine dealer or the nearest Alpine Service
Station for servicing.
Failure to do so may result in fire or electric shock.
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may result in fire.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
Use for other than its designed application may result in fire,
electric shock or other injury.
DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS
IN INSERTION SLOTS OR GAPS.
Doing so may result in personal injury or damage to the product.
2-EN
Correct Handling
PRECAUTIONS
Do not drop the disc while handling. Hold the disc so you will
not leave fingerprints on the surface. Do not affix tape, paper, or
gummed labels to the disc. Do not write on the disc.
Never Attempt the Following
Do not grip or pull out the disc while it is being pulled back into
the player by the automatic reloading mechanism.
Do not attempt to insert a disc into the unit when the unit power
is off.
CORRECT
INCORRECT
Inserting Discs
Your player accepts only one disc at a time for playback. Do not
attempt to load more than one disc.
Make sure the label side is facing up when you insert the disc.
Your player will automatically eject any disc that is inserted
incorrectly. If the player continues to eject a correctly inserted
disc, push the RESET switch with a pointed object such as a
ballpoint pen.
Playing a disc while driving on a very bumpy road may result in
skips, but this will not scratch the disc or damage the player.
CORRECT
Disc Cleaning
Fingerprints, dust, or soil on the surface of the disc could cause
the CD player to skip. For routine cleaning, wipe the playing
surface with a clean, soft cloth from the center of the disc to the
outer edge. If the surface is heavily soiled, dampen a clean, soft
cloth in a solution of mild neutral detergent before cleaning the
disc.
New Discs
As a protective measure to prevent the CD from jamming, the CD
player will automatically eject discs with irregular surfaces or
inserted incorrectly. When a new disc is inserted into the player
and ejected after initial loading, using your finger, feel around the
inside of the center hole and outside edge of the disc. If you feel
any small bumps or irregularities, this could inhibit proper
loading of the disc. To remove the bumps, rub the inside edge of
the hole and outside edge of the disc with a ballpoint pen or other
such instrument, then insert the disc again.
Center Hole
Bumps
Center Hole
Disc Accessories
There are various accessories available on the market for
protecting the disc surface and improving sound quality.
However, most of them will influence the thickness and/or
diameter of the disc. Using such accessories can cause the disc to
be out of standard specifications and may create operational
problems. We recommend not using these accessories on discs
played in Alpine CD players.
New
Disc
Outside
(Bumps)
Transparent Sheet
Disc Stabilizer
Irregular Shaped Discs
Be sure to use round shape discs only for this unit and never use
any special shape discs.
Use of special shape discs may cause damage to the mechanism.
Continued
Installation Location
Make sure the CDE-9845/CDE-9843/CDE-9841 will not be
installed in a location subjected to:
•
•
•
•
Direct sun and heat
High humidity and water
Excessive dust
Excessive vibrations
3-EN
On handling Compact Discs (CD/CD-R/CD-RW)
•
•
•
•
•
•
Do not touch the surface.
Do not expose the disc to direct sunlight.
Do not affix stickers or labels.
Clean the disc when it is dusty.
Make sure that there are no bumps around the disc.
Do not use commercially available disc accessories.
Do not leave the disc in the car or the unit for a long
time. Never expose the disc to direct sunlight. Heat
and humidity may damage the CD and you may not be
able to play it again.
To customers using CD-R/CD-RW
•
•
If a CD-R/CD-RW cannot be played back, make sure the last
recording session was closed (finalized).
Finalize the CD-R/CD-RW if necessary, and attempt playback
again.
About media that can be played.
The following table shows which discs can be played on which
models.
CD
CD-TEXT
MP3
WMA
CDE-9845
\
\
\
\
CDE-9843
\
\
\
CDE-9841
\
Use only compact discs with the label side showing the CD logo
marks below.
(CDE-9845/CDE-9843 only)
If you use unspecified compact discs, correct performance cannot
be guaranteed.
You can play CD-Rs (CD-Recordable)/CD-RWs (CDReWritable) which have been recorded only on audio devices.
You can also play CD-Rs/CD-RWs containing MP3/WMA
formatted audio files.
•
•
Some of the following CDs may not play on this unit:
Flawed CDs, CDs with fingerprints, CDs exposed to extreme
temperatures or sunlight (e.g., left in the car or this unit), CDs
recorded under unstable conditions, CDs on which a
recording failed or a re-recording was attempted, copyprotected CDs which do not conform to the audio CD
industry standard.
Use discs with MP3/WMA files written in a format
compatible with this unit. For details, see pages 10-11.
4-EN
3
Getting Started
Grasp the left side of the front panel and pull it out.
CDE-9845
SOURCE/POWER
Rotary encoder
c
• The front panel may become hot in normal usage (especially the
connector terminals on the back of the front panel.) This is not a
malfunction.
• To protect the front panel, place it in the supplied carrying case.
Attaching
1
2
MUTE/SETUP
Insert the right side of the front panel into the main
unit. Align the groove on the front panel with the
projections on the main unit.
Push the left side of the front panel until it locks
firmly into the main unit.
CDE-9843
SOURCE/POWER
Rotary encoder
1
• Before attaching the front panel, make sure that there is no dirt or
dust on the connector terminals and no foreign object between the
front panel and the main unit.
• Attach the front panel carefully, holding the sides of the front panel
to avoid pushing buttons by mistake.
MUTE/SETUP
Initial System Start-Up
CDE-9841
SOURCE/POWER
2
c
4/3
c
Be sure to press the RESET switch when using the unit for the first
time, after changing the car battery, etc.
1
2
3
Turn off the unit power.
Remove the detachable front panel.
Press RESET with a ballpoint pen or similar
pointed object.
MUTE/SETUP
1
Turning Power On and Off
Press SOURCE/POWER to turn on the unit.
• The unit can be turned on by pressing any other button except eject
c and TITLE .
Press and hold SOURCE/POWER for at least 2
seconds to turn off the unit.
RESET switch
Adjusting Volume
• The first time power is turned on, the volume will start from level 12.
Turn the Rotary encoder (CDE-9845/CDE-9843 only)
or press 4 and 3 (CDE-9841 only) until the desired
sound is obtained.
Detaching and Attaching the Front Panel
Lowering Volume Quickly
Detaching
1
2
Turn off the unit power.
Activating the Audio Mute function will instantly lower the volume
level by 20 dB.
Press MUTE/SETUP to activate the MUTE mode.
Press
(Release) at the lower left side until the
front panel pops out.
The audio level will decrease by about 20 dB.
Pressing MUTE/SETUP again will bring the audio
back to its previous level.
5-EN
3
Radio
Choose either AREA 1 or AREA 2 by pressing
BAND.
AREA 1: Radio frequencies for North America
AREA 2: Other Radio frequencies
CDE-9845
SOURCE/ TUNE/
POWER A.ME BAND
4
Rotary encoder
Pressing and holding MUTE/SETUP for at least 2
seconds will return to normal mode.
• The stored radio stations will be cleared every time you change the
setting.
Listening to Radio
1
g
f
MUTE/SETUP
Preset buttons
(1 through 6)
2
Press SOURCE/POWER until a radio frequency
appears in the display.
Press BAND repeatedly until the desired radio
band is displayed.
F1 (FM1) → F2 (FM2) → AM → F1 (FM1)
CDE-9843
SOURCE/ TUNE/
POWER A.ME BAND
3
Press TUNE/A.ME to select the tuning mode.
DX SEEK (Distance mode) → SEEK (Local mode) →
OFF (Manual mode) → DX SEEK
Rotary encoder
• The initial mode is Distance mode.
g
f
MUTE/SETUP
Preset buttons
(1 through 6)
Distance mode:
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
Local mode:
Only strong stations will be automatically tuned in (Automatic
Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
4
CDE-9841
Press g or f to tune in the desired station.
Holding down g or f will change the frequency
continuously.
• The ST indicator appears on the display when a stereo FM station
is tuned in.
SOURCE/ TUNE/
POWER A.ME BAND
Manual Storing of Station Presets
1
g
f
Preset buttons
(1 through 6)
2
Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
Press and hold, for at least 2 seconds, any one of
the preset buttons (1 through 6) that you want
to store the station on.
The selected station is stored.
The display shows the band, preset no. and station
frequency memorized.
Changing the Radio Frequencies for each
Country (CDE-9845/CDE-9843 only)
For customers not living in North America, change the radio
frequencies as follows.
1
2
Press and hold MUTE/SETUP for at least 2
seconds to select the SETUP mode.
Select the “AREA” mode by pressing g or f.
6-EN
• A total of 18 stations can be stored in the preset memory (6 stations
for each band; FM1, FM2 and AM).
• If you store a station in a preset memory which already has a
station, the current station will be cleared and replaced with the
new station.
Automatic Memory of Station Presets
Station Title Search Function (CDE-9845 only)
1
If the title of a radio station is entered, you can search for that radio
station by its title while listening to the currently received radio
station.
2
Press BAND repeatedly until the desired radio
band is displayed.
Press and hold TUNE/A.ME for at least 2 seconds.
The frequency on the display continues to change while
the automatic memory is in progress. The tuner will
automatically seek and store 6 strong stations in the
selected band. They will be stored into buttons 1 to 6 in
order of signal strength.
When the automatic memory has been completed, the
tuner goes to the station stored in preset location no. 1.
• If no stations are stored, the tuner will return to the original station
you were listening to before the auto memory procedure began.
1
Press
mode.
in Radio mode to switch to Title Search
The first title input blinks in the display.
2
3
Select the desired title by turning the Rotary
encoder within 10 seconds.
Press the Rotary encoder to receive the
frequency of the selected title.
Tuning to Preset Stations
• Title Search mode is canceled by pressing and holding for at
least 2 seconds.
• If a station has no title, “NO TITLE” is displayed for 2 seconds.
1
Frequency Search Function (CDE-9845 only)
2
Press BAND repeatedly until the desired band is
displayed.
You can search for a radio station by its frequency.
Press any one of the station preset buttons (1
through 6) that has your desired radio station in
memory.
The display shows the band, preset number and
frequency of the station selected.
1
2
3
Press and hold
for at least 2 seconds in Radio
mode to activate Frequency Search mode.
Turn the Rotary encoder within 10 seconds to
select the desired frequency.
Press the Rotary encoder to receive the selected
frequency.
• Frequency Search mode is canceled by pressing and holding
at least 2 seconds.
for
7-EN
2
CD/MP3/WMA
Pressing and holding 8 or 9 will change folders
continuously.
CDE-9845
Rotary encoder
SOURCE/
POWER -/J
CDE-9845/CDE-9843:
While playing back MP3/WMA, press 8 or 9 to
select the desired folder.
8
3
c
Press g or f to select the desired track (file).
Returning to the beginning of the current track (file):
Press g.
Fast backward :
Press and hold g.
Advancing to the beginning of the next track (file) :
Press f.
g
f
9
) 6(
) 5(
4(
) TITLE
CDE-9843
SOURCE/
POWER -/J
Fast forward :
Press and hold f.
4
To pause playback, press -/J.
5
To eject the disc, press c.
c
Rotary encoder
Pressing -/J again will resume playback.
• Do not remove a CD during its eject cycle. Do not load more than
one disc at a time. A malfunction may result from doing either.
• If the CD does not eject, press and hold c for at least 2 seconds.
g
f 1(9) 2(8)
4(
3(
)
6(
)
)
TITLE
5(
)
CDE-9841
SOURCE/
POWER -/J
CDE-9845 (compatible with MP3/WMA)/
CDE-9843 (compatible with MP3):
• The CD-player can play discs containing audio data, MP3 data
and WMA data.
• A WMA format file that is protected by DRM (Digital Rights
Management) cannot be played back on this unit.
• The track display for MP3/WMA data playback is the file numbers
recorded on the disc.
c
4
MP3/WMA Play Display
The folder number and file number will be displayed as described
below.
CDE-9845:
g
f 3
)
5(
4(
6(
)
)
TITLE
F01 T03 10'15
Folder number File number
display
display
Playback
Elapsed time
The following table shows which discs can be played on which
models.
CD
CD-TEXT
MP3
WMA
CDE-9845
\
\
\
\
CDE-9843
\
\
\
CDE-9841
\
1
Insert a disc with the label side facing up.
CDE-9843:
MP3
F01 T03
The disc will be pulled into the unit automatically.
Folder number File number
display
display
• If the folder number or file number are three figures, “F” or “T” is
not displayed.
• Press TITLE
to switch the display. Please see “Displaying the
Title/Text” (page 14) for information about display switching.
When a disc is already inserted, press SOURCE/POWER
to switch to the CD mode.
The mode will change every time the button is pressed.
TUNER → CD → TUNER
8-EN
Repeat Play
Scanning Programmes
Press 4 (
played.
Press 6 (
) to play back repeatedly the track being
The track (file) will be played repeatedly.
Press 4 (
) again and select OFF to deactivate repeat play.
) to activate the Scan mode.
The first 10 seconds of each track (file) will be played back in
succession.
To stop scanning, press 6 (
mode.
) and deactivate the Scan
CD mode :
RPT
: Only a track is repeatedly played back
↓
Tracks can be searched and played using the CD text on the disc. In
the case of discs that do not support text, searches can be made using
the track numbers.
(off)
MP3/WMA mode (CDE-9845 only):
MP3 mode (CDE-9843 only):
RPT
: Only a file is repeatedly played back
↓
RPT
Searching CD Text (CDE-9845/CDE-9843 only)
1
2
Press
during play.
This will set the search mode.
Turn the Rotary encoder to select the desired
track, then press the Rotary encoder.
This will play the selected track.
: Only files in a folder are repeatedly
played back
↓
• Press and hold for at least 2 seconds in the search mode to
cancel. Or, the search mode will be cancelled when an operation
has not been performed in 10 seconds.
• CD text search cannot be made during M.I.X. play.
(off)
M.I.X. (Random Play)
Press 5 (
) in the play or pause mode.
The tracks (files) on the disc will be played back in random
sequence.
To cancel M.I.X. play, press 5 (
) again.
CD mode :
↓
M.I.X.
: Tracks are played back in
random sequence.
↓
(off)
MP3/WMA mode (CDE-9845 only):
MP3 mode (CDE-9843 only):
↓
M.I.X.: Only files in a folder are played back in
random sequence.
↓
M.I.X.: Files are played back in random sequence.
↓
(off)
9-EN
File/Folder Name Search (concerning MP3/
WMA) (CDE-9845/CDE-9843 only)
About MP3/WMA (CDE-9845/CDE-9843 only)
CAUTION
Except for private use, duplicating audio data (including MP3/
WMA data) or distributing, transferring, or copying it, whether for
free or for a fee, without permission of the copyright holder is
strictly prohibited by the Copyright Act and by international treaty.
You can display and search for the folder and file name while
listening to the file currently being played back.
1
Press
to select File Name Search mode or
Folder Name Search mode in MP3/WMA mode.
What is MP3?
File Name Search mode
2
3
4
MP3, whose official name is “MPEG-1 Audio Layer 3,” is a
compression standard prescribed by the ISO, the International
Standardization Organization and MPEG which is a joint
activity institution of the IEC.
Press 8 or 9 to select another Folder.
Select the desired file by turning the Rotary
encoder within 10 seconds.
Press the Rotary encoder to play back the
selected file.
• File Name Search mode is cancelled by pressing and holding
at least 2 seconds.
• While in File Name Search mode, press to switch to Folder
Name Search mode.
• File Name search cannot be made during M.I.X. play.
for
Folder Name Search mode
2
3
Turn the Rotary encoder within 10 seconds to
select the desired folder.
Press the Rotary encoder to play back the first
file in the selected folder.
• Search mode is cancelled by pressing and holding for at least 2
seconds in Folder Name Search mode.
• While in Folder Name Search mode, press to switch to File
Name Search mode.
• “NO FILE” is displayed for 2 seconds if the folder that is selected
by the Folder Name Search mode contains no files.
• “ROOT” is displayed for the root folder which does not have
folder name.
• Folder Name search cannot be made during M.I.X. play.
Quick Search (CDE-9845/CDE-9843 only)
You can search for tracks (files).
1
2
Press and hold
for at least 2 seconds in the CD/
MP3/WMA mode to activate Quick Search mode.
Turn the Rotary encoder within 10 seconds to
select a desired track (file).
The selected track is played back immediately.
• Search mode is cancelled by pressing and holding
seconds in Quick Search mode.
for at least 2
MP3 files contain compressed audio data. MP3 encoding is
capable of compressing audio data at extremely high ratios,
reducing the size of music files to as much as one-tenth their
original size. This is achieved while still maintaining near CD
quality. The MP3 format realizes such high compression ratios
by eliminating the sounds that are either inaudible to the
human ear or masked by other sounds.
What is WMA?
WMA, or “Windows Media™ Audio,” is compressed audio
data.
WMA allows you to create music files and store them at higher
ratios of compression than MP3 audio data (approx. half
original size). This is achieved while still maintaining CD
quality sound.
Method for creating MP3/WMA files
Audio data is compressed by using MP3/WMA specified
software. For details on creating MP3/WMA files, refer to the
user's manual for that software.
MP3/WMA files that can be played back by this device have
the file extension “mp3” / “wma”. Files with no extension
cannot be played back. (WMA ver. 7.1, 8 and 9 are
supported)
Supported playback sampling rates and bit rates
MP3
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz,
16 kHz, 12 kHz, 11.025 kHz, 8 kHz
Bit rates:
8 - 320 kbps
Variable bit rate: 8 - 320 kbps
WMA
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz
Bit rates:
48 - 192 kbps
Variable bit rate: 48 - 320 kbps
Note that for sampling rates, this device’s frame display (Page
14) may not display correctly.
This device may not play back correctly depending on
sampling rates.
ID3 tags/WMA tags
This device supports ID3 tag v1 and v2, and WMA tag.
If tag data is in an MP3/WMA file, this device can display the title
(track title), artist name, and album name ID3 tag/WMA tag data.
This device can only display single-byte alphanumeric
characters (up to 30 for ID3 tags and up to 15 for WMA tags)
and the underscore. For non-supported characters, “NO
SUPPORT” (CDE-9845 only) or “NO SUPRT” (CDE-9843/CDE9841 only) is displayed.
The tag information may not be correctly displayed,
depending on the contents.
Producing MP3/WMA discs
MP3/WMA files are prepared, then written to a CD-R or CDRW using CD-R writing software. A disc can hold up to 510
files/folders (including Root Folders). However, the maximum
number of folders is 255.
Media supported
10-EN
The media that this device can play back are CD-ROMs, CDRs, and CD-RWs.
Corresponding File Systems
Terminology
This device supports discs formatted with ISO9660 Level 1 or Level 2.
Under the ISO9660 standard, there are some restrictions to
remember.
The maximum nested folder depth is 8 (including the root
directory). The number of file/folder name characters is
limited.
Valid characters for folder/file names are letters A-Z (all
caps), numbers 0-9, and ‘_’ (underscore).
This device also can play back discs in Joliet, Romeo, etc.,
and other standards that conform to ISO9660. However,
sometimes the file names, folder names, etc., are not
displayed correctly.
Formats supported
This device supports CD-ROM XA, Mixed Mode CD,
Enhanced CD (CD-Extra) and Multi-Session.
This device cannot correctly play back discs recorded with
Track At Once or packet writing.
Order of files
The unit plays the files in the order that the writing software
writes them. Therefore, the playing order may not be the same
as the order you input. The playback order of the folders and
files is shown in the illustration. The folder and file playback
order may differ from the folder no. and file no. indicated in the
display.
1
Bit rate
This is the “sound” compression rate specified for encoding. The higher
the bit rate, the higher the sound quality, but also the larger the files.
Sampling rate
This value shows how many times per second the data is sampled
(recorded). For example, music CDs use a sampling rate of 44.1
kHz, so the sound is sampled (recorded) 44,100 times per second.
The higher the sampling rate, the higher the sound quality, but also
the larger the volume of data.
Encoding
Converting music CDs, WAVE (AIFF) files, and other sound files
into the specified audio compression format.
Tag
Song information such as track titles, artist names, album names,
etc., written into MP3/WMA files.
MP3: ID3 tag
WMA: WMA tag
Root folder
The root folder is found at the top of the file system. The root folder
contains all folders and files.
2
2
Root folder
3
4
3
4
5
5
6
6
7
1
Folder
MP3/WMA File
11-EN
Sound Setting
CDE-9845
• If the Rotary encoder is not pressed within 5 seconds after
selecting the BASS, TREBLE BALANCE, FADER, DEFEAT or
SUBWOOFER mode, the unit automatically returns to normal
mode.
* When the subwoofer mode is set to OFF, its level cannot be
adjusted.
SOURCE/
POWER BAND
Rotary encoder
2
Turn the Rotary encoder (CDE-9845/CDE-9843
only) or press 4 and 3 (CDE-9841 only) until the
desired sound is obtained in each mode.
By setting Defeat ON, previously adjusted settings of
BASS and TREBLE will return to the factory defaults and
BBE* is turned off.
* CDE-9845 only
g BASS C. TREBLE C. f
CDE-9843
Setting the Bass Control
You can change the bass frequency emphasis to create your own tonal
preference.
SOURCE/
POWER BAND
Rotary encoder
1
Press BASS C. (CDE-9845/CDE-9843 only) or
press CENTER f. (CDE-9841 only) to select the
Bass (bass center frequency) Control mode.
CDE-9845/CDE-9843:
BASS ↔ normal
CDE-9841:
BASS → TREBLE → normal mode → BASS
g BASS C. TREBLE C.
f
SOURCE/
POWER BAND
2-1
Setting the bass center frequency:
Press g or f to select the desired bass center
frequency.
CDE-9841
60Hz ↔ 80Hz ↔ 100Hz ↔ 120Hz ↔ 60Hz
4
The displayed bass frequency is emphasized
2-2
Setting the bass band width (Q-Factor):
Press BAND to select the desired bass band
width.
→ 1
→
2
→
3
→
4
(Narrow)← ...................................... →(Wide)
g CENTER f. MODE
f 3
Adjusting Bass/Treble/Balance (Between Left
and Right)/Fader (Between Front and Rear)/
Defeat
1
Press the Rotary encoder (CDE-9845/CDE-9843
only) or press MODE (CDE-9841 only) repeatedly
to choose the desired mode.
Each press changes the modes as follows:
BASS → TREBLE → SUBWOOFER* → BALANCE → FADER
→ DEFEAT → VOLUME → BASS
BASS: -7 ~ +10
TREBLE: -7 ~ +7
Subwoofer : 0 ~ +15
Balance : L15 ~ R15
Fader : R15 ~ F15
Defeat : ON/OFF
Volume : 0 ~ 35
12-EN
Changes the boosted bass band width to wide or narrow.
A wide setting will boost a wide range of frequencies
above and below the center frequency. A narrower setting
will boost only frequencies near the center frequency.
2-3
Setting the bass level:
Turn the Rotary encoder (CDE-9845/CDE-9843
only) or press 4 and 3 (CDE-9841 only) to select
the desired bass level (–7~+10).
You can emphasize or weaken the bass frequency.
• If no operation is performed within 15 seconds, the bass control
setting will be turned off automatically.
• The bass level settings will be individually memorized for each
source (FM, AM, CD, etc.) until the setting is changed. The bass
frequency and bass band width settings adjusted for one source are
effective for all other sources (FM, AM, CD etc.).
• This function is inoperable when DEFEAT is set to ON.
Setting the Treble Control
You can change the Treble Frequency emphasis to create your own
tonal preference.
1
Press TREBLE C. (CDE-9845/CDE-9843 only) or
press CENTER f. (CDE-9841 only) to select the
Treble (treble center frequency) Control mode.
CDE-9845/CDE-9843:
TREBLE ↔ normal mode
CDE-9841:
BASS → TREBLE → normal mode → BASS
Turning Loudness On/Off
(CDE-9843/CDE-9841 only)
Loudness introduces a special low- and high-frequency emphasis at
low listening levels. This compensates for the ear's decreased
sensitivity to bass and treble sound.
Press and hold the Rotary encoder (CDE-9843 only)
or press and hold MODE (CDE-9841 only) for at least
2 seconds to activate or deactivate the loudness mode.
The display shows “LD” when the loudness mode is activated.
2-1
Setting the treble Center frequency:
Press g or f to select the desired treble
center frequency.
7.5kHz ↔ 10.0kHz ↔ 12.5kHz ↔ 15.0kHz
The displayed Treble frequency is emphasized.
2-2
Setting the treble level:
Turn the Rotary encoder (CDE-9845/CDE-9843
only) or press 4 and 3 (CDE-9841 only) to select
the desired treble level (–7~+7).
You can emphasize the treble frequency.
• If no operation is performed within 15 seconds, the treble control
setting will be turned off automatically.
• The treble level settings will be individually memorized for each
source (FM, AM, CD, etc.) until the setting is changed. The Treble
frequency settings adjusted for one source are effective for all other
sources (FM, AM, CD, etc.).
• This function is inoperable when DEFEAT is set to ON.
Setting the BBE Mode (CDE-9845 only)
BBE makes vocals or instruments sound distinct regardless of the
music source. The FM radio, CD, and MP3, will be able to reproduce
the music clearly even in cars with a lot of road noise.
1
2
3
4
5
Press SOURCE/POWER to select the source to
which you want to apply BBE.
Press and hold the Rotary encoder for at least 2
seconds to activate the level setting mode.
Press the Rotary encoder to set BBE ON.
Turn the Rotary encoder to select your preferred
level (BBE1 to 3) or OFF.
Press the Rotary encoder for at least 2 seconds
to return to normal mode.
• To cancel BBE mode for all music sources, press the Rotary
encoder to turn BBE off.
• BBE mode is automatically canceled if no buttons are pressed
within 15 seconds.
• Each music source, such as FM radio, CD, and MP3/WMA can
have its own BBE setting.
• Setting to BBE OFF sets BBE mode of each music source to OFF.
• This function is inoperable when DEFEAT is set to ON.
• There is no BBE mode for AM radio.
13-EN
Press TITLE
Other Functions
.
The display will change every time the button is pressed.
The display in Radio mode:
FREQUENCY → CLOCK → TITLE → FREQUENCY
CDE-9845
-/J
The display in CD mode:
CDE-9845/CDE-9843
TRACK NO./ELAPSED TIME → TRACK NO./CLOCK →
TEXT (DISC NAME)*1 → TEXT (TRACK NAME)*1 → TITLE →
TRACK NO./ELAPSED TIME
Rotary encoder
CDE-9841
TRACK NO./ELAPSED TIME → TRACK NO./CLOCK → TITLE
→ TRACK NO./ELAPSED TIME
g
f
The display in MP3/WMA mode:
CDE-9845
FOLDER NO./FILE NO./ELAPSED TIME →
FOLDER NO./FILE NO./CLOCK → FOLDER NAME*4 →
FILE NAME → ARTIST NAME*2 → ALBUM NAME*2 →
TRACK NAME*2 → FRAME*3 →
FOLDER NO./FILE NO./ELAPSED TIME
TITLE
CDE-9843
-/J
g
The display in MP3 mode:
CDE-9843
FILE NO./ELAPSED TIME → FOLDER NO./FILE NO. →
FILE NO./CLOCK → FOLDER NAME*4 → FILE NAME →
ARTIST NAME*2 → ALBUM NAME*2 → TRACK NAME*2 →
FRAME*3 → FILE NO./ELAPSED TIME
Rotary encoder
f
*1 Displayed during playback of a disc with CD Text.
“NO TEXT” will be displayed when the CD contains no Text data.
*2 ID3 tag/WMA tag
If an MP3/WMA file contains ID3 tag/WMA tag information, all
the ID3 tag/WMA tag information is displayed (e.g., track name,
artist name, and album name). All other tag data is ignored.
“NO DATA” will be displayed when an MP3/WMA file contains no
ID3 tag/WMA tag information.
*3 The recording sampling rate and bit rate of the MP3/WMA file are
displayed. The VBR (Variable Bit rate) file displays the average bit
rate.
*4 “ROOT” is displayed for the folder name of the root folder which
does not have folder name.
TITLE
CDE-9841
-/J
4/3
About the indicator display
When displaying Title/Text, the following indicators are lit
according to the mode.
g f MODE
TITLE
Bass Level is usually displayed. When BBE is set, the display
changes according to the BBE setting (CDE-9845 only).
Displaying the Title/Text
Indicator/
Mode
The following table shows which discs can be played on which
models.
CD
CD-TEXT
MP3
WMA
CDE-9845
\
\
\
\
CDE-9843
\
\
\
CDE-9841
\
It is possible to display the CD title if the title has been previously
inputted (“Titling Discs” page 15). Text information, such as the disc
name and the track name, will be displayed if playing a CD text
compatible disc. It is also possible to display the folder name, the file
name, and the tag, etc., while playing MP3/WMA files.
14-EN
*2
*2
*2
*2
*2
CD Mode
MP3/WMA Mode
TUNER MODE
While displaying
Title
—
—
While displaying
Folder Name
While displaying
—
File Name
While displaying
—
Artist Name*1
While displaying While displaying
Text (Disc Name) Album Name*1
While displaying
While displaying
Text (Track Name) Track Name*1
—
*1 Tag information.
*2 Apply only to the CDE-9845/CDE-9843.
—
—
—
—
While displaying
Title
About “Title” and “Text”
Title:
With this device, it is possible to input the CD and radio
station name (page 15). This inputted name is referred to as a
“title.”
You cannot input or display titles on MP3/WMA discs.
Text:
Text compatible CDs contain text information such as the disc
name and track name. Such text information is referred to as
“text.”
• Some characters may not be displayed correctly with this device,
depending on the character type.
• When the Scroll Setting (page 17) is set to “SCROLL MANU” for
CDE-9845 and “SCR MANU” for CDE-9843, press and hold
TITLE
for at least 2 seconds to scroll the Text information only
once (TEXT DISPLAY, FOLDER NAME DISPLAY, FILE NAME
DISPLAY or TAG DISPLAY mode).
• “NO SUPPORT” (CDE-9845 only) or “NO SUPRT” (CDE-9843/
CDE-9841 only) is displayed when the desired text information
cannot be displayed on this unit.
• If the title was not previously input, “NO TITLE” is displayed.
• The text or tag information may not be correctly displayed,
depending on the contents.
Titling Discs/Radio Stations
It is possible to title your favourite CD's or radio stations.
You cannot input titles for MP3/WMA discs.
1
2
3
4
5
Press TITLE
and select the Title Display.
For details, see “Displaying the Title/Text” (page 14).
Press and hold TITLE
for at least 2 seconds.
The first character will blink.
Turn the Rotary encoder (CDE-9845/CDE-9843
only) or press 4 and 3 (CDE-9841 only) to select
the desired letter/numeral/symbol available for
naming.
1
Press and hold -/J for at least 2 seconds.
3
Press g or f repeatedly until the title you
want to erase is displayed.
4
Press and hold -/J for at least 2 seconds to erase
the title displayed.
5
Press TITLE
repeatedly until the time is displayed.
• Selecting any tuner or CD function while in the clock priority mode
will interrupt the time display momentarily. The function selected
will be displayed for about 5 seconds before the time returns to the
display.
• When the power is off but the ignition key is on, press TITLE
to
display the time.
Setting Time
1
In the Clock priority mode, press and hold
for at least 2 seconds while the time is
TITLE
displayed.
The time indication will blink.
Repeat steps 3 and 4 above to complete the titling.
• If you cancel while entering a title, selected characters are not
written.
• You can enter 18 CD titles and 24 radio station titles on this unit. If
you try to store beyond the limit, the display will show “FULL
DATA.” At this point, no more titles can be stored. To input a new
title, one of the previously inputted titles must first be deleted.
• When you want to erase a title, enter the “ ” symbol into all
spaces.
• The operations described in steps 3 to 5 must be made within 10
seconds. The input mode will be cancelled if no action is taken for
over 10 seconds.
to cancel the title erasing mode.
Each press changes the display.
For details, see “Displaying the Title/Text” (page 14).
3
to record the title.
Press TITLE
Displaying Time
2
Press TITLE
The title in the display will blink.
• You cannot erase CD-TEXT.
• “NO DATA” is displayed for 2 seconds if the title is not input in
step 2, or if the title is erased in step 4.
The first character will stop blinking and the display will
automatically advance to the next character. When that
character begins to blink, you may choose the next letter
or symbol of your title.
Pressing the Rotary encoder (CDE-9845/CDE-9843 only)
or press MODE (CDE-9841 only) after entering the 8th
character automatically stores the title into memory.
Press TITLE
to select the Title Display. Then,
press again and hold for at least 2 seconds.
2
Press the Rotary encoder (CDE-9845/CDE-9843
only) or press MODE (CDE-9841 only) to store the
first character.
When entering a title of less than 8 characters (for
example, 3 character title):
After entering 3 characters, the 4th character space will
be blinking. Go to step 6 to complete the title.
6
Erasing Disc Title/Radio Station Title
4
Turn the Rotary encoder (CDE-9845/CDE-9843
only) or press 4 and 3 (CDE-9841 only) to adjust
the hours while the time indication is blinking.
When the hour has been adjusted, press the
Rotary encoder (CDE-9845/CDE-9843 only) or
press MODE (CDE-9841 only).
Turn the Rotary encoder (CDE-9845/CDE-9843
only) or press 4 and 3 (CDE-9841 only) to adjust
the minutes while the time indication is blinking.
The time is automatically set 5 seconds after the minute
adjustment. The time can also be manually set by
pressing the Rotary encoder (CDE-9845/CDE-9843 only)
or press MODE (CDE-9841 only).
• To synchronize the clock to another clock/watch or radio time
announcement, press and hold the Rotary encoder (CDE-9845/
CDE-9843 only) or press and hold MODE (CDE-9841 only) for at
least 2 seconds after setting the “hour.” Minutes will reset to 00. If
the display shows over “30” minutes when you do this, the time
will advance one hour.
15-EN
SETUP
A typical SETUP procedure is shown in steps 1 to 4
as follows. See below for further information about
each SETUP menu.
You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, choose from Sound Customizing,
Visual Customizing, etc., to make your desired settings.
1
Press and hold MUTE/SETUP for at least 2
seconds.
SETUP mode is activated.
CDE-9845
2
BAND
Rotary encoder
Press g or f to select the desired SETUP
menu.
(e.g. Select SUBW)
CDE-9845
ILLUMI → DIMMER → SUBW → CDDA / MP3/CDDA →
SCROLL TYPE → SCROLL → AUX IN →
*1 (AUXILIARY/TV/VCR/GAME) → POWER IC → AREA*2 →
DEMO → ILLUMI
g
f
*1 Displayed only when AUX IN is ON.
*2 Refer to “Listening to Radio” (page 6).
MUTE/SETUP
CDE-9843
DIM → SUBW → CD-DA / CDDA/MP3 → SCR TYPE → SCR →
PWR → AREA*2 → DIM
*2 Refer to “Listening to Radio” (page 6).
CDE-9841
SUBW → PWR → SUBW
CDE-9843
BAND
Rotary encoder
3
Press BAND to change the setting.
4
Press MUTE/SETUP for at least 2 seconds again.
(e.g. Select SUBW ON or SUBW OFF.)
The display returns to normal mode.
Sound Customizing
g
f
Subwoofer On and Off
MUTE/SETUP
SUBW ON (Initial setting) / SUBW OFF
When the subwoofer is on, perform the steps below to adjust the
subwoofer output level.
1 Press the Rotary encoder (CDE-9845/CDE-9843 only) or
press MODE (CDE-9841 only) repeatedly to select the
SUBW mode.
CDE-9841
BAND
4/3
BASS → TREBLE → SUBWOOFER → BALANCE → FADER →
DEFEAT → VOLUME → BASS
2 To adjust the level, turn the Rotary encoder (CDE-9845/
CDE-9843 only) or press 4 and 3 (CDE-9841 only).
g f MODE
16-EN
MUTE/SETUP
Visual Customizing (CDE-9845/CDE-9843 only)
Setting the Multicolor Illumination (CDE-9845 only)
ILLUMI BLUE (Initial setting) / ILLUMI GREEN / ILLUMI AMBER
/ ILLUMI RED
You can change the lighting color of the following four buttons:
SOURCE/POWER, BAND, g and f.
BLUE → GREEN → AMBER → RED → BLUE
• According to the lighting colour of the above four buttons, the
colour of the other buttons also changes.
When the colour of the four buttons is BLUE/AMBER/RED, the
colour of the others is RED. When the colour of the four buttons is
GREEN, the others are also GREEN.
Dimmer Control (CDE-9845/CDE-9843 only)
CDE-9845:
DIMMER AUTO (Initial setting) / DIMMER MANU
CDE-9843:
DIM AUTO (Initial setting) / DIM MANU
Set the DIMMER control to AUTO to decrease the illumination
brightness of the unit with the head lights of the vehicle ON. This
mode is useful if you feel the unit's button lighting is too bright at
night.
External Device
Setting the AUX Mode (CDE-9845 only)
AUX IN ON / AUX IN OFF (Initial setting)
You can input the audio of a connected external device,(such as a
portable player) to the AUX input terminal of this unit, using a
commercially-available converter cable.
You can change the AUX name display when AUX IN ON is set.
Select the AUX name by pressing g or f.
Connecting to an External Amplifier
CDE-9845:
POWER IC ON (Initial setting) / POWER IC OFF
CDE-9843/CDE-9841:
PWR ON (Initial setting) / PWR OFF
When an external amplifier is connected, sound quality can be
improved by stopping the power supply of the built-in amplifier.
PWR OFF : Use this mode when the pre-amplifier of the unit
are used to drive an external amplifier connected to the
speakers. In this setting, the head unit’s internal amplifier has
no output to drive speakers.
CDE-9845:
Front
left
Scroll Type Setting (CDE-9845/CDE-9843 only)
TYPE1 (Initial setting) / TYPE2
Amplifier
Front
right
Choose from two scrolling methods.
Select the type you prefer.
Rear
left
Scroll Setting (CDE-9845/CDE-9843 only)
Amplifier
CDE-9845:
SCROLL AUTO / SCROLL MANU (Initial setting)
CDE-9843:
SCR AUTO / SCR MANU (Initial setting)
This CD player can scroll the disc and track names recorded on CDTEXT discs, as well as the text information of MP3/WMA files,
folder names, and tags.
SCROLL AUTO : The CD text information, the text information
of folder and file names, and the tags are
scrolled automatically.
SCROLL MANU : The display is scrolled only when a disc is
loaded or when a track is changed, etc.
CDE-9843/CDE-9841:
DEMO ON / DEMO OFF (Initial setting)
MP3/WMA (CDE-9845/CDE-9843 only)
Front
right
PWR ON : The speakers are driven by the built-in amplifier.
Speakers
SPEAKER
RIGHT FRONT
This unit has a Demonstration feature for the display and sound.
• To quit Demo mode, set to DEMO OFF.
Front
left
Amplifier
• The unit scrolls CD text names, folder names, file names or tag
display. The disc titles input manually (page 15) cannot be scrolled.
Demonstration (CDE-9845 only)
Rear
right
SPEAKER
RIGHT REAR
Front
right
Rear
right
Playing MP3/WMA Data (CDE-9845/CDE-9843 only)
CDE-9845:
CDDA (Initial setting) / CDDA/MP3
CDE-9843:
CD-DA (Initial setting) / CDDA/MP3
This product can playback CDs containing both CD and MP3/WMA
data. However, in some situations (some enhanced CDs), playback
may be difficult. For these special cases, you can select playback of
CD data only. When a disc contains both CD or the MP3/WMA data,
playback starts from the CD data portion of the disc.
CDDA
: Only CD data can be played back.
CDDA/MP3 : Both CD data and MP3/WMA file tracks can be
played back.
• Perform this setting before inserting a disc. If a disc has already
been inserted, perform the setting after you remove the disc.
SPEAKER
LEFT REAR
SPEAKER
LEFT FRONT
Rear
left
Front
left
• No sound is produced by the system when the power output is set to
OFF.
17-EN
Information
In Case of Difficulty
If you encounter a problem, please turn the power off, then on again.
If the unit is still not functioning normally, please review the items in
the following checklist. This guide will help you isolate the problem
if the unit is at fault. Otherwise, make sure the rest of your system is
properly connected or consult your authorized Alpine dealer.
Basic
No function or display.
• Vehicle's ignition is off.
- If connected following instructions, the unit will not
operate with the vehicle's ignition off.
• Improper power lead (Red) and battery lead (Yellow)
connections.
- Check power lead and battery lead connections.
• Blown fuse.
- Check the fuse of the unit; replace with the proper value if
necessary.
• Internal micro-computer malfunctioned due to interference
noise etc.
- Press the RESET switch with a ballpoint pen or other
pointed article.
Radio
Unable to receive stations.
• No antenna or open connection in cable.
- Make sure the antenna is properly connected;
replace the antenna or cable if necessary.
Unable to tune stations in the seek mode.
• You are in a weak signal area.
- Make sure the tuner is in the DX mode.
• If the area you are in is a primary signal area, the antenna may
not be grounded and connected properly.
- Check your antenna connections; make sure the antenna is
properly grounded at its mounting location.
• The antenna may not be the proper length.
- Make sure the antenna is fully extended; if broken, replace
the antenna with a new one.
Broadcast is noisy.
• The antenna is not the proper length.
- Extend the antenna fully; replace it if it is broken.
• The antenna is poorly grounded.
- Make sure the antenna is grounded properly at its mounting
location.
CD
CD Player not functioning.
• Out of operating temperature range +50˚C (+120˚F) for CD.
- Allow the vehicle's interior (or trunk) temperature to cool.
CD playback sound is wavering.
• Moisture condensation in the CD Module.
- Allow enough time for the condensation to evaporate (about
1 hour).
18-EN
CD insertion not possible.
• A CD is already in the CD player.
- Eject the CD and remove it.
• The CD is being improperly inserted.
- Make sure the CD is being inserted following instructions in
the CD Player Operation section.
Unable to fast forward or backward the CD.
• The CD has been damaged.
- Eject the CD and discard it; using a damaged CD in your unit
can cause damage to the mechanism.
CD playback sound skips due to vibration.
• Improper mounting of the unit.
- Securely re-mount the unit.
• The disc is very dirty.
- Clean the disc.
• The disc has scratches.
- Change the disc.
• The pick-up lens is dirty.
- Do not use a commercially available lens cleaner disc.
Consult your nearest ALPINE dealer.
CD playback sound skips without vibration.
• The disc is dirty or scratched.
- Clean the disc; damaged disc should be replaced.
Error displays (built-in CD player only)
• Mechanical error
- Press c. After the error indication disappears, insert the disc
again. If the above-mentioned solution does not solve the
problem, consult your nearest ALPINE dealer.
CD-R/CD-RW playback not possible
• Close session (finalization) has not been performed.
- Perform finalization and attempt playback again.
MP3/WMA (CDE-9845/CDE-9843 only)
MP3 or WMA is not played back.
• Writing error occurred. The CD format is not compatible.
- Make sure the CD has been written in a supported format.
Refer to “About MP3/WMA” (pages 10-11), then rewrite in
the format supported by this device.
* CDE-9845 is compatible with MP3/WMA. CDE-9843 is
compatible with MP3.
Audio
The sound is not output from the speakers.
• Unit has no output signal of the internal amplifier.
- POWER-IC is switched to “ON” (page 17).
Indication for CD Player
HI TEMP
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature returns to
within operation range.
NO DISC
• No CD is inserted.
- Insert a CD.
• Although a disc is inserted, “NO DISC” is displayed and the
unit does not start to play or eject the disc.
- Remove the disc by following these steps:
Press the c button again for at least 2 seconds.
If the disc still does not eject, consult your Alpine dealer.
ERROR
• Mechanism error.
1) Press the c button and eject the CD.
If not ejecting, consult your Alpine dealer.
2) When the error indication remains after ejecting, press the
c button again.
If the error indication still does not turn off after pressing
the c button for a few times, consult your Alpine dealer.
• When “ERROR” is displayed:
If that the disc cannot be ejected by pressing c, press the RESET
switch (refer to page 5) and press c again.
If the disc still cannot be ejected, consult your Alpine dealer.
• The disc is not compatible with the unit.
- Insert a disc which is compatible with the unit.
PROTECT
(CDE-9845 only)
• A copy-protected WMA file was played back.
- You can only play back non-copy-protected files.
UNSUPORT
(CDE-9845 only)
• The disc is not written in a MP3/WMA supported format.
- Use a disc written at the MP3/WMA supported format.
UNSUPORT
(CDE-9843 only)
• The disc is not written in a MP3 supported format.
- Use a disc written at the MP3 supported format.
Specifications
FM TUNER SECTION
Tuning Range
Mono Usable Sensitivity
50 dB Quieting Sensitivity
Alternate Channel Selectivity
Signal-to-Noise Ratio
Stereo Separation
Capture Ratio
87.7 – 107.9 MHz**
9.3 dBf (0.8 µV/75 ohms)
13.5 dBf (1.3 µV/75 ohms)
80 dB
65 dB
35 dB
2.0 dB
AM TUNER SECTION
Tuning Range
Sensitivity (IEC Standard)
530 – 1,710 kHz**
22.5 µV/27 dB
CD PLAYER SECTION
Frequency Response
Wow & Flutter (% WRMS)
Total Harmonic Distortion
Dynamic Range
Signal-to-Noise Ratio
Channel Separation
5 – 20,000 Hz (±1 dB)
Below measurable limits
0.008% (at 1 kHz)
95 dB (at 1 kHz)
105 dB
85 dB (at 1 kHz)
PICKUP
Wave length
Laser power
795 nm
CLASS I
GENERAL
Power Requirement
14.4 V DC
(11–16 V allowable)
Power Output
16 W RMS × 4*
* Primary amplifier ratings per CEA-2006 Standard
• Power output: measured at 4 Ohms and ≤ 1% THD+N
• S/N: 80 dBA (reference: 1 W into 4 Ohms)
Bass
+20 dB/-14 dB at 100 kHz
Treble
±14 dB at 10 kHz
Maximum Pre-Output Voltage 2 V/10 k ohms
Weight
1.6 kg (3 lbs. 8 oz)
CHASSIS SIZE
Width
Height
Depth
178 mm (7")
50 mm (2")
160 mm (6-1/4")
NOSEPIECE SIZE
Width
Height
Depth
170 mm (6-11/16")
46 mm (1-13/16")
18 mm (11/16")
• Due to continuous product improvement, specifications and design
are subject to change without notice.
** CDE-9845/CDE-9843:
When you choose “AREA 2” in the section “Changing the Radio
Frequencies for each Country” (page 6), the tuning range is as
follows.
FM : 87.5 - 108.0 MHz
AM : 531 - 1,602 kHz
19-EN
Installation and Connections
Before installing or connecting the unit, please read the
following and pages 2 and 3 of this manual thoroughly
for proper use.
Warning
MAKE THE CORRECT CONNECTIONS.
Failure to make the proper connections may result in fire or
product damage.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
BEFORE WIRING, DISCONNECT THE CABLE FROM THE
NEGATIVE BATTERY TERMINAL.
Failure to do so may result in electric shock or injury due to
electrical shorts.
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN
SURROUNDING OBJECTS.
Arrange wiring and cables in compliance with the manual to
prevent obstructions when driving. Cables or wiring that obstruct
or hang up on places such as the steering wheel, gear lever, brake
pedals, etc. can be extremely hazardous.
DO NOT SPLICE INTO ELECTRICAL CABLES.
Never cut away cable insulation to supply power to other
equipment. Doing so will exceed the current carrying capacity of
the wire and result in fire or electric shock.
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING
HOLES.
When drilling holes in the chassis for installation, take
precautions so as not to contact, damage or obstruct pipes, fuel
lines, tanks or electrical wiring. Failure to take such precautions
may result in fire.
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR
STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.
Bolts or nuts used for the brake or steering systems (or any other
safety-related system), or tanks should NEVER be used for
installations or ground connections. Using such parts could
disable control of the vehicle and cause fire etc.
DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER
VEHICLE OPERATION, SUCH AS THE STEERING WHEEL
OR GEARSHIFT.
Doing so may obstruct forward vision or hamper movement etc.
and results in serious accident.
IMPORTANT
Please record the serial number of your unit in the space provided
below and keep it as a permanent record. The serial number plate is
located on the bottom of the unit.
20-EN
Caution
HAVE THE WIRING AND INSTALLATION DONE BY
EXPERTS.
The wiring and installation of this unit requires special technical
skill and experience. To ensure safety, always contact the dealer
where you purchased this product to have the work done.
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM
SECURELY.
Be sure to use only the specified accessory parts. Use of other
than designated parts may damage this unit internally or may not
securely install the unit in place. This may cause parts to become
loose resulting in hazards or product failure.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR
PINCHED BY A SHARP METAL EDGE.
Route the cables and wiring away from moving parts (like the
seat rails) or sharp or pointed edges. This will prevent crimping
and damage to the wiring. If wiring passes through a hole in
metal, use a rubber grommet to prevent the wire’s insulation from
being cut by the metal edge of the hole.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE
OR DUST.
Avoid installing the unit in locations with high incidence of
moisture or dust. Moisture or dust that penetrates into this unit
may result in product failure.
Precautions
• Be sure to disconnect the cable from the (–) battery post before
installing your CDE-9845/CDE-9843/CDE-9841. This will
reduce any chance of damage to the unit in case of a shortcircuit.
• Be sure to connect the color coded leads according to the
diagram. Incorrect connections may cause the unit to
malfunction or damage to the vehicle’s electrical system.
• When making connections to the vehicle’s electrical system, be
aware of the factory installed components (e.g. on-board
computer). Do not tap into these leads to provide power for
this unit. When connecting the CDE-9845/CDE-9843/CDE9841 to the fuse box, make sure the fuse for the intended
circuit of the CDE-9845/CDE-9843/CDE-9841 has the
appropriate amperage. Failure to do so may result in damage to
the unit and/or the vehicle. When in doubt, consult your
ALPINE dealer.
• The CDE-9845/CDE-9843/CDE-9841 uses female RCA-type
jacks for connection to other units (e.g. amplifier) having RCA
connectors. You may need an adaptor to connect other units. If
so, please contact your authorized ALPINE dealer for
assistance.
• Be sure to connect the speaker (–) leads to the speaker (–)
terminal. Never connect left and right channel speaker cables
to each other or to the vehicle body.
SERIAL NUMBER:
INSTALLATION DATE:
INSTALLATION TECHNICIAN:
PLACE OF PURCHASE:
3
Installation
1
No Pressure Here
Mounting Sleeve
(Included)
Dashboard
Slide the CDE-9845/CDE-9843/CDE-9841 into the
dashboard until it clicks. This ensures that the unit
is properly locked and will not accidentally come
out from the dashboard. Install the Detachable
Front Panel.
Removal
1 Remove the DETACHABLE FRONT PANEL.
2 Insert the optional brackets into the back, along the
guides on either side of the unit. The unit can now be
removed from the mounting sleeve.
No Pressure Here
This unit
CDE-9845/CDE-9843/CDE-9841
Bracket (included)
Remove the Detachable Front Panel (refer to page
5). Slide mounting sleeve from main unit. (see
“Removal” on this page).
Slide the mounting sleeve into the dashboard.
• Please examine the installation. Make certain that no external
pressure is applied to either the top of the unit or the removable
nosepiece.
2
3 Pull the unit out, keeping it unlocked as you do so.
<JAPANESE CAR>
Screw
Hex Nut (M5)
Face Plate
**
Bolt Stud
Metal
Mounting
Strap
CDE-9845/
CDE-9843/
CDE-9841
*
Screws (M5 × 8)
(Included)
Ground Lead
CDE-9845/CDE-9843/
CDE-9841
Ground Lead
*
Chassis
Mounting Bracket
Reinforce the head unit with the metal mounting
strap (not supplied). Secure the ground lead of the
unit to a clean metal spot using a screw (*) already
attached to the vehicle’s chassis.
• Secure the ground lead of the unit to a clean metal spot using a
screw (*) already attached to the vehicle's chassis.
• For the screw marked **, use an appropriate screw for the chosen
mounting location.
Connect each input lead coming from an amplifier
or equalizer to the corresponding output lead
coming from the left rear of the CDE-9845/CDE9843/CDE-9841. Connect all other leads of the CDE9845/CDE-9843/CDE-9841 according to details
described in the CONNECTlONS section.
21-EN
Connections
1
POWER ANT
Blue
Blue/White
REMOTE
TURN-ON
ILLUMINATION
Orange
Antenna
2
To power antenna
3
To amplifier or equalizer
4
To the instrument cluster
illumination lead
(CDE-9845/CDE-9843 only)
Red
Yellow
Black
IGNITION
5
BATTERY
6
GND
7
Ignition Key
Battery
(), -: CDE-9845 only)
)
SPEAKER
RIGHT
FRONT
+
~
8
SPEAKER
RIGHT
REAR
SPEAKER
LEFT
REAR
SPEAKER
LEFT
FRONT
Gray
9
Gray/
Black
!
Violet/
Black
"
Violet
#
Green
$
Green/
Black
%
White/
Black
&
White
(
Speakers
Front right
Rear right
Rear left
Front left
Speakers
,
Front Left
Amplifier
Front Right
(CDE-9845 only)
CDE-9845:
Rear or Subwoofers∗1
,
Amplifier
*1 When Subwoofer is set to OFF: Output is from Rear speakers.
When Subwoofer is set to ON: Output is from Subwoofer.
*2 When Subwoofer is set to OFF: Output is from Front speakers.
When Subwoofer is set to ON: Output is from Subwoofer.
For details on how to set the Subwoofer to ON/OFF, see “Subwoofer On and Off” on page 16.
22-EN
CDE-9843/CDE-9841:
Front or Subwoofers∗2
1 Antenna Receptacle
2 Power Antenna Lead (Blue)
Connect this lead to the +B terminal of your power antenna,
if applicable.
3 Remote Turn-On Lead (Blue/White)
Connect this lead to the remote turn-on lead of your
amplifier or signal processor.
4 Illumination Lead (Orange) (CDE-9845/CDE-9843
only)
This lead may be connected to the vehicle's instrument
cluster illumination lead. This will allow the backlighting of
the unit to dim whenever the vehicle's lights are turned on.
5 Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the vehicle's fuse
box or another unused power source which provides (+)12V
only when the ignition is turned on or in the accessory
position.
6 Battery Lead (Yellow)
Connect this lead to the positive (+) post of the vehicle's
battery.
7 Ground Lead (Black)
Connect this lead to a good chassis ground on the vehicle.
Make sure the connection is made to bare metal and is
securely fastened using the sheet metal screw provided.
" Right Rear (–) Speaker Output Lead (Violet/Black)
# Right Rear (+) Speaker Output Lead (Violet)
$ Left Rear (+) Speaker Output Lead (Green)
% Left Rear (–) Speaker Output Lead (Green/Black)
& Left Front (–) Speaker Output Lead (White/Black)
( Left Front (+) Speaker Output Lead (White)
) Front Output RCA Connectors (CDE-9845 only)
RED is right and WHITE is left.
~ Rear/Subwoofer Output RCA Connectors (CDE-9845
only)
~ Front/Subwoofer Output RCA Connectors (CDE-9843/
CDE-9841 only)
RED is right and WHITE is left.
+ Fuse Holder (10A)
, RCA Extension Cable (Sold Separately)
- AUX Input Terminal (CDE-9845 only)
This terminal allows for input of audio from an external
device, (such as a portable player), using a commerciallyavailable converter cable.
8 Power Supply Connector
9 Right Front (+) Speaker Output Lead (Gray)
! Right Front (–) Speaker Output Lead (Gray/Black)
To prevent external noise from entering the audio system.
• Locate the unit and route the leads at least 10cm away from the car harness.
• Keep the battery power leads as far away from other leads as possible.
• Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.
• If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various Alpine
noise suppressors, contact them for further information.
• Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.
23-EN
LIMITED WARRANTY
ALPINE ELECTRONICS OF AMERICA, INC. AND ALPINE OF CANADA INC. ("Alpine"), are dedicated to quality
craftsmanship and are pleased to offer this Warranty. We suggest that you read it thoroughly. Should you have any
questions, please contact your Dealer or Alpine at one of the telephone numbers listed below.
[PRODUCTS COVERED:
This Warranty covers Car Audio/Visual Products and
Related Accessories ("the product"). Products purchased in
the Canada are covered only in the Canada. Products
purchased in the U.S.A. are covered only in the U.S.A.
2 You should provide a detailed description of the
problem(s) for which service is required.
3 You must supply proof of your purchase of the product.
4 You must package the product securely to avoid
damage during shipment.
[LENGTH OF WARRANTY:
[HOW WE LIMIT IMPLIED WARRANTIES:
All Alpine Car Audio analog tape heads excluding Video
tape heads are warranted for life against manufacturing
defects causing failure.
ANY IMPLIED WARRANTIES INCLUDING FITNESS FOR
USE AND MERCHANTABILITY ARE LIMITED IN
DURATION TO THE PERIOD OF THE EXPRESS
WARRANTY SET FORTH ABOVE AND NO PERSON IS
AUTHORIZED TO ASSUME FOR ALPINE ANY OTHER
LIABILITY IN CONNECTION WITH THE SALE OF THE
PRODUCT.
[WHO IS COVERED:
[HOW WE EXCLUDE CERTAIN DAMAGES:
This Warranty is in effect for one year from the date of the
first consumer purchase.
[LIFETIME TAPE HEAD WARRANTY:
This Warranty only covers the original purchaser of the
product, who must reside in the United States, Puerto Rico
or Canada.
[WHAT IS COVERED:
This Warranty covers defects in materials or workmanship
(parts and labor) in the product.
[WHAT IS NOT COVERED:
This Warranty does not cover the following:
1 Damage occurring during shipment of the product to
Alpine for repair (claims must be presented to the
carrier).
2 Damage caused by accident, abuse, negligence,
misuse, improper connections, improper operation or
failure to follow instructions contained in the Owner's
manual.
3 Damage caused by act of God, including without
limitation, earthquake, fire, flood, storms or other acts of
nature.
4 Any cost or expense related to the removal or
reinstallation of the product.
5 Service performed by an unauthorized person, company
or association.
6 Any product which has the serial number defaced,
altered or removed.
7 Any product which has been adjusted, altered or
modified without Alpine's consent.
8 Any product not distributed by Alpine within the United
States, Puerto Rico or Canada.
9 Any product not purchased from an Authorized Alpine
Dealer.
! Any product that has been determined to contain an
excessive amount of dust or dirt and any product that
contains other contaminants including liquid or foreign
objects.
[HOW TO OBTAIN WARRANTY SERVICE:
1 You are responsible for delivery of the product to an
Authorized Alpine Service Center or Alpine for repair
and for payment of any initial shipping charges. Alpine
will, at its option, repair or replace the product with a
new or reconditioned product without charge. If the
repairs are covered by the warranty, and if the product
was shipped to an Authorized Alpine Service Center or
Alpine, Alpine will pay the return shipping charges.
ALPINE EXPRESSLY DISCLAIMS LIABILITY FOR
INCIDENTAL AND CONSEQUENTIAL DAMAGES
CAUSED BY THE PRODUCT. THE TERM "INCIDENTAL
DAMAGES" REFERS TO EXPENSES OF
TRANSPORTING THE PRODUCT TO THE ALPINE
SERVICE CENTER, LOSS OF THE ORIGINAL
PURCHASER'S TIME, LOSS OF THE USE OF THE
PRODUCT, BUS FARES, CAR RENTALS OR OTHERS
COSTS RELATING TO THE CARE AND CUSTODY OF
THE PRODUCT. THE TERM "CONSEQUENTIAL
DAMAGES" REFERS TO THE COST OF REPAIRING OR
REPLACING OTHER PROPERTY WHICH IS DAMAGED
WHEN THIS PRODUCT DOES NOT WORK PROPERLY.
THE REMEDIES PROVIDED UNDER THIS WARRANTY
ARE EXCLUSIVE AND IN LIEU OF ALL OTHERS.
[HOW STATE/PROVINCIAL LAW RELATES TO THE
WARRANTY:
This Warranty gives you specific legal rights, and you may
also have other rights which vary form state to state and
province to province. In addition, some states/provinces do
not allow limitations on how long an implied warranty lasts,
and some do not allow the exclusion or limitation of
incidental or consequential damages. Accordingly,
limitations as to these matters contained herein may not
apply to you.
[IN CANADA ONLY:
This Warranty is not valid unless your Alpine car audio
product has been installed in your vehicle by an Authorized
Installation Center, and this warranty stamped upon
installation by the installation center.
[HOW TO CONTACT CUSTOMER SERVICE:
Should the product require service, please call the following
number for your nearest Authorized Alpine Service Center.
U.S.A.
CANADA
1-800-ALPINE-1 (1-800-257-4631)
1-800-ALPINE-1 (1-800-257-4631)
Alpine Electronics of America, Inc., 19145 Gramercy Place, Torrance, California 90501, U.S.A.
Alpine Electronics of Canada, Inc., Suite 203, 7300 Warden Ave. Markham, Ontario, L3R 9Z6, Canada
NO POSTAGE
NECESSARY
IF MAILED
INTHE
UNITED STATES
BUSINESS REPLY MAIL
FIRST CLASS MAIL PERMIT N.320 TORRANCE, CA.90509
POSTAGE WILL BE PAID BY ADDRESSEE
ALPINE ELECTRONICS OF AMERICA, INC.
Attention: MARKETING SERVICES
P.O. Box 2859
Torrance, CA 90509-9939
ffffblLPINE. Customer Care Registration
li,ccii+J.l0if.
For easy on-line registration, go to "\flfw'\f'Woalpine-usa.com/registration"
Thank you for choosing Alpine! Please register your product with us so we can serve you better.
First name:
Product purchased
Last name:
1. D
2. D
3. D
4. D
5. D
6. D
7. D
8. D
_
Home address: ~-;--...-.-------------Street address
City
State/Provo
Zip Code
May we contact you at this address?
1. DYes 2. D No
Phone number: (
---------------
May we contact you at this number?
w
a:
w
::J:
..J
<C
w
en
E-mail Address:
1. D Male
Year:
1. D Single
~ Which ethnicity best describes
1. D Caucasian
4. D Asian
2. D Hispanic
5. 0 Other
3. 0 African-American
t
_
2. D Married
__
Date of Purchase:
Year:
_
-----------2.0 Other ~ (Brand Name)
-----------Purpose of buying this unit?
~Vour highest level of education completed:
1. D High School Student
2. 0 High School Graduate
3. 0 2 Yr. Degree/Some College
4. 0 Completed 4 Yr. College
5. 0 Completed Graduate School
1. 0
2. 0
3. 0
4. 0
5. 0
Executive/Managerial
Secretarial/Clerical
Sales
General Labor
Professional
o
o
6.
EngineeringlTechnical
7.• DFarming/Fishing
8.
Retired
9. D Student
10.·00ther
_
en
m
»
rJ:
m
J]
m
Household Income
*Previous brand replaced?
1.0 Factory installed
2.0 Alpine
3. D Other
_
1.0 I usually have more. electronic equipment than my friends
2. 0 I am usually one of the first ofmy friends to buy the newest
electronic equipment
3. 01 usually wait until a product has been out for awhile before
I pu rchase it
4. 0 I am usually on of the firstofmyfriendsto know about the
newest car
5. 0 I usually know. more about cars than my friends
Occupation
If navigation system, which monitor?
1. D Addition
2.0 Replacement ~
yourself:
----------
III Which of the following statements best describes you?
_
_
2.0No.
(Brand Name)
1. 0 Alpine ~ (Model No.)
2. D Female
Date of Birth Month:
Marital Status
1. DYes 2. D No
1.0Yes
Model Number:
Month:
---------------
May we contact you bye-mail?
Gender
1. DYes 2. D No
When you purchased this..Alpine unit, dld you
compare it with other brands?
9. 0 Monitor Controller
10.0 Video Monitor
11.0 Navigation
12. 0 Mobile Mayday
13. 0 Video Tape Player
14.0 Processor/Equalizer
15. 0 Security
16.00ther
Cassette Player
CD Player
MD Player
DVD Player
CD Changer
Amplifier
Speaker
Subwoofer
1. 0 Less than $30,000
2. D $30,000 - $50,000
3. 0 $50,000 - $70,000
_
~Type of vehicle in which this unit.is installed.
Have you purchased Alpine products before?
Make:
1. D First time
PurchasedYear:
2.0 Two or more times
4. 0$70,000 - $90,000
5. 0 $90,000- $110,000
6.0.0ver$110,000
Model: __- - - - - - - - _
Model Year:
_
How was this vehicle purchased?
1. 0 Bought
Thank you for your cooperation! We value your privacy. This information will remain confidential with Alpine and its affiliates.
2. 0 Leased
PART NO. 68P04190K01-0