Sengled C01-BR30 User manual

User Manual
C01-BR30 LED Lamp
LED + Wireless Audio System
Features
• Install like any other light bulb. Enjoy the energy savings from
LED and the audio quality of JBL speakers.
• Two bulb system - Master bulb wirelessly connects to Satellite
bulbs for true stereo and multi-room audio
- One Master bulb paired with One Satellite bulb
• Supports 7 sound effect settings
- Normal, Pop, Jazz, Classic, Rock, Vocal and Movie
• Compatible with most smart phones, tablets and computers
that support Bluetooth® technology
• Download the free Pulse Android or iOS App for greater
functionality
Box Contents
• C01-BR30 Bulbs (Two), include:
- One Master (M)
- One Satellite (S)
• User Manual
• Limited Written Express Warranty
Product Specifications (per Bulb)
• Power Supply: 120V ac, 60Hz, 0.17A (Typ.)
• Lamp Socket: E26 (US Version)
• Power Consumption: 15W (Light and Audio),
•
•
•
•
Peak 30W
Operating Temperature: 0° C ~ +35° C
Colour: Pewter or Candy Apple
Dimensions: 5.46" (H) x Φ 3.86" (Dia.)
Weight: 14.46oz (approx.)
LED Lights
• Power: 8 Watts
• Luminance: 600 lumens
• Colour Temperature: 2700K - Warm White
• Light Beam Angle: 105 degrees
Audio System
Power: 13 Watts @ 8ohm
1.75’’ Full Range High Fidelity Loudspeaker
Frequency Response: 100 Hz - 20 kHz
System Wireless Point-to-Point Latency < 20ms
Bluetooth Standard: v2.1 + EDR (Class 2)
Bluetooth Transmitter Frequency Range: 2.402 - 2.480 GHz
Bluetooth Profiles: A2DP, AVRCP, iAP, SPP etc.
Bluetooth Transmitter power: 4dBm, 30 feet
Point (Master) to Multi-point (Satellite) Audio: 5GHz wireless
technology
• Distance Range between Master and Satellite Bulbs: 100 feet
(near line of sight)
•
•
•
•
•
•
•
•
•
INSTALLATION INSTRUCTIONS
WARNING - TO REDUCE THE RISK OF FIRE AND ELECTRIC
SHOCK, USE IN DRY LOCATIONS ONLY AND DO
NOT EXPOSE TO RAIN OR LIQUIDS.
WARNING - TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE THE BACK COVER OR TAKE APART.
THERE ARE NO SERVICEABLE PARTS INSIDE.
1. Before installing the Pulse into an E26 light bulb socket, turn the
light switch to the OFF position. (DO NOT USE WITH
EXTERNAL OR OUTSIDE DIMMERS).
2. Screw the bulb into an E26 socket and turn the power on. The
LED light will turn on and an audio ‘ping’ should also be heard
coming from the Master bulb only (not from the Satellite bulb).
3. On the portable smart device (e.g. smartphone, tablet, or
computer), make sure Bluetooth is turned on. Then via
Bluetooth, connect the smart device with the Master bulb. The
default Master bulb’s Bluetooth ID is ‘C01-BR30’. Once
connected, user can launch any media App on the smart device
to enjoy music via the Pulse light speakers. Or go to Step 4 to
download and install Pulse mobile App for greater control of
the light and speakers.
4. Search for the 'Pulse by Sengled' App for corresponding
operating system, download and install it on a portable smart
device:
Get App from Google Play Store for Android Devices;
Get App from App Store for Apple iOS Devices (iPhone, iPad,
iPad mini, iPod touch);
5. Open the Pulse application, and a 'Welcome' page appears.
The Pulse App will search and connect to bulb automatically.
The wizard guides you through the steps for connecting your
portable smart device to the Master bulb. If the application
doesn't detect a Master bulb, restart the application and setup
wizard again.
6. Once the portable device has been successfully connected to
the Master bulb, the application will display the main control
screen. Press the 'Lights' or 'Sound' tab to switch between
them and achieve different functions, such as Light Brightness
& Settings, Sound Volume & Settings, and Equalizer (EQ)
Settings etc.
7. The user can also change the default name of the bulbs (e.g.
C01-BR30) to a more meaningful name, such as ‘Living room
Master’ or ‘Living room Satellite’. This can be found under 'Edit
Label'.
8. Android users can find a list of the latest Music Players under
the ‘Launch Media Apps’ tab. User can sort the player list
according to preference. More information about the
application is introduced in detail in the 'About' tab.
IMPORTANT SAFETY INSTRUCTIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
Read and keep these safety instructions.
Heed all warnings contained within these instructions.
Please follow all user manual instructions when installing the
product.
Only clean SENGLED product only with a dry towel.
This Product is intended for indoor use only.
Do NOT use this product outdoors.
Do NOT get this product wet and do NOT use near any
water source.
The product should not be exposed to dripping or splashing
liquids of any kind.
Do not install the product near any heat sources, such as
heater, radiators, stove, heat registers or other apparatus that
produce heat.
Ensure that the product is stable and secured in place during
installation. If the product is dropped or falls out of the light
socket, it may cause bodily harm.
If the product is dropped or falls out of the light socket, it may
be damaged. Please check the product for any visible damage.
To reduce the risk of electric shock, do NOT remove the back
cover or take apart. There are no serviceable parts inside.
To prevent product failure, the bulb should only be installed in
operating environments ranging between +32 degrees
Fahrenheit and +95 degrees Fahrenheit (0 degrees Celsius
and +35 degrees Celsius).
•
Do not block any ventilation openings on the product, as
shown below.
•
Never push any objects into the openings or slots on the
product. Doing so may create an electric shock or fire hazard.
Maintain sufficient distance around your product for sufficient
ventilation; do not put anything within at least 6 inches of light
bulb socket.
For best protection against lightning, unscrew the product
from its power source during a storm.
Only use accessories specifically recommended by the
manufacturer.
Refer all servicing to qualified SENGLED service technician.
Servicing is required when the product:
1) Has been damaged in any way;
2) Liquid has been spilled on the product;
3) Objects have fallen into the product;
4) The product has been exposed to rain or moisture,
5) The product does not operate normally, or has been
dropped.
Repairs must be performed by a qualified SENGLED
technician.
For bulbs with a weight significantly higher than the bulbs for
which they are a replacement, the increased weight may
reduce the mechanical stability of certain luminaires and bulb
holders and this may impair contact and bulb retention. Check
all sockets and bulb holders frequently and make sure they are
secure and stable.
The bulb can be hot and should not be touched without
taking care.
•
•
•
•
•
•
•
CAUTION:
WITHIN THE 5150 - 5250 MHZ BAND, INDOOR OPERATIONS ARE
ONLY ALLOWED.
NOT FOR USE IN EMERGENCY LIGHTING.
DO NOT USE IN DAMP LOCATIONS.
ENSURE FIXTURE CAN SUPPORT ADDED WEIGHT OF BULB.
FCC STATEMENT FOR USERS
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
SECTION 15.21
The user’s manual or instruction manual for an intentional
or unintentional radiator shall caution the user that
changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment. In cases where the
manual is provided only in a form other than paper, such
as on a computer disk or over the Internet, the information required by this section may be included in the
manual in that alternative form, provided the user can
reasonably be expected to have the capability to access
information in that form.
FEDERAL COMMUNICATION COMMISSION
INTERFERENCE STATEMENT, SECTION 15.105(b)
This equipment has been tested and found to comply
with the limits for a class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates uses and
can radiate radio frequency energy and if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
RF RADIATION EXPOSURE WARNING
This equipment must be installed and operated in
accordance with provided instructions and the antenna(s)
used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and
must not be co-located or operated in conjunction with
any other antenna or transmitter. End-users and installers
must be provided with antenna installation instructions
and transmitter operating conditions to satisfy RF
exposure compliance.
© 2014 SENGLED, Incorporated. All rights reserved. Pulse by SENGLED is a
trademark of SENGLED, Incorporated, registered in the United States and
other countries. Specifications are subject to change without notice. Apple,
iPhone, iPad, iPad mini and iPod touch are trademarks of Apple Inc., registered
in the U.S. and other countries. Other Trademarks and trade names are the
property of their respective owners.