DA1907SX
Ditto-Amp™ 1-in 2-out VGA Dist. Amplifier
KEY FEATURES
• Two Buffered Outputs
• Ideal for use with LCD/DLP Projectors
• Comes with 3-foot Male to Male VGA Input Cable
• Ultra Compact Design
• Solid Metal Enclosure
DESCRIPTION
The Ditto-Amp™, part # DA1907SX, is a high
resolution 1-in 2-out VGA (VGA thru UXGA) distribution amplifier designed to simultaneously feed a
local monitor and a distant monitor or projector.
The Ditto-Amp is ideal for use with LCD/DLP
projectors and other displays that utilize a 15-pin HD
(VGA-type) input connector.The local monitor output is aligned for optimal performance up to approximately 12 feet, while the main output is aligned for
optimal performance at 75 feet, with the capability
of driving as far as 250 feet depending on the signal
resolution and cable quality.
power and it turns green when the input senses an
active signal.This makes it easy to troubleshoot the
unit, especially in applications using laptop computers
(where it is not always clear if you are receiving an
active signal from the source.)
Distribution Amplifiers
• External Power Supply (9V 500mA)
The Ditto-Amp is packaged with a 3-foot Male to Male
VGA cable (part # CB3703MR) for connection to the
output of a computer. Longer cables are also available.
The Ditto-Amp offers a compact solid metal enclosure
that can be mounted using optional hardware.The
Ditto-Amp also has step-by-step user’s instructions
on the face of the unit to allow for an easy installation.
The LED indicator on the face of the unit performs
a dual function: it turns red when the unit is receiving
133
APPLICATION DIAGRAM
Specifications subject to change without notice.
ALTINEX, Inc. • Toll Free: 800-ALTINEX • Tel: 714-990-2300 • Fax: 714-990-3303 • Web: www.altinex.com
Distribution Amplifiers
DA1907SX
Side View
Top View
Side View
SPECIFICATIONS
GENERAL
ELECTRICAL
Input: ..........................................15-pin HD Female
Outputs:
Local Monitor:....................15-pin HD Female
Main Output........................15-pin HD Female
Compatibility: ...........................VGA thru UXGA
May also be used to pass high res. RGBHV, RGBS,
RGsB, and RsGsBs format signals (may require
connector adaptation).
Input Video Signal:
Analog ..................................-1.5V to 1.5V (1.5V p-p max.)
Impedance ...........................75 Ohm
Input Sync Signal:
Horiz.,Vert. & C-Sync .......TTL (+/-)
Sync on Green....................-0.3 V
Impedance ...........................10 kOhms
Output Video Signal:
Analog ...................................Gain of 1.05 (+/-5%)
Fall/Rise Time ......................1.0 ns
Impedance ...........................75 Ohm
Output Sync Signal:
Horiz.,Vert. & C-Sync .......TTL (+/-)
Sync on Green....................-0.3 V
Impedance ...........................22 Ohm
Frequency Compatibility:
Horizontal............................15-200 kHz
Vertical ..................................47-180 Hz
Bandwidth............................400 MHz @ -3dB
Cable Equalization ..................6dB at 180 MHz (Main Output)
Coupling ....................................DC
Cross-talk..................................-40dB @ 10 MHz
Power .........................................9V-500mA
external adapter (incl.)
Power Consumption ..............4 watts Max.
MECHANICAL
134
Ditto-Amp™ 1-in 2-out VGA Dist. Amplifier
Width .........................................4.50 in................114 mm
Height.........................................3.00 in................76 mm
Depth .........................................1.00 in................25 mm
Weight........................................0.4 lb. .................0.18 kg
Ship Weight ...............................2.4 lb. .................1.09 kg
Material......................................0.1” A1
Finish ..........................................Grey
Front/Back Panels....................Lexan
T° Operating ............................10°C-35°C
T° Maximum.............................50°C
Humidity....................................90% non-condensing
MTBF (calc.)..............................40,000 hrs
OPTIONAL ACCESSORIES
MB1001: Mini mounting brackets
(2 - “L” shaped brackets)
Specifications subject to change without notice.
ALTINEX, Inc. • Toll Free: 800-ALTINEX • Tel: 714-990-2300 • Fax: 714-990-3303 • Web: www.altinex.com