Electrohome 22 User manual

EAAC470 / EAAC470W
USER MANUAL
USB Charging Alarm Clock Radio
with Dual Alarm and Battery Backup
Thank you for your purchase of this Electrohome product. Please read this
instruction manual carefully before using product to ensure proper use.
Keep this manual in a safe place for future reference.
electrohome.com
NEED
HELP?
DO NOT RETURN THIS
PRODUCT TO THE STORE
Please contact an ELECTROHOME® customer support
representative first regarding any additional information on
product features, specifications or assistance with setup.
Please contact us via one of the methods below:
Support:
www.electrohome.com/support
Online live web chat:
www.electrohome.com
For more product information visit www.electrohome.com
-2-
WARNINGS
WARNING
To reduce the risk of fire or electric shock, do not expose this appliance to rain or
moisture.
CAUTION
Use of controls or adjustments or performance of procedures other than those specified
may result in hazardous radiation exposure.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION - TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICABLE PARTS INSIDE, REFER TO QUALIFIED USER PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral traingle, is intended
to alert the user to the presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING
TO PREVENT ELECTRIC SHOCK; DO NOT USE THIS PLUG WITH AN EXTENSION CORD RECEPTACLE OR
OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURES. TO
PREVENT FIRE OR SHOCK HAZARD; DO NOT INSTALL THIS PRODUCT IN A CONFINED SPACE SUCH AS A
BOOK CASE OR SIMILAR UNIT.
CAUTION: RETAIN THIS MANUAL FOR FUTURE REFERENCE
1.
2.
3.
4.
5.
6.
Read these instructions.
Keep these instructions.
Read all warnings.
Follow all instructions.
Do not use this product near water.
WARNING: Please refer to the information on exterior bottom enclosure for electrical and safety
information before installing or operating the apparatus.
-3-
IMPORTANT SAFETY INFORMATION
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong is provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularily at plugs, convenience
receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
Apparatus shall not be exposed to dripping or splashing, and that not objects filled with
liquids, such as vases, shall be placed on the apparatus.
The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
The MAINS plug is used as the disconnect device, which shall remain readily operable.
The MAINS plug of apparatus should not be obstructed and should be easily accessed during
intended use.
The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture.
There should be a minimum distance of 5 cm around the apparatus for sufficient ventilation.
The ventilation should not be impeded by covering the ventilation openings with items such as
newspaper, table-cloths, curtains etc.
No naked flame sources such as lighted candles should be placed on the apparatus.
Please use the apparatus in moderate climates.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
-4-
IMPORTANT SAFETY INFORMATION
26. Unwind and straighten the power cord before use.
27. Damage Requiring Service
Unplug the power cord and refer servicing to qualified service professional under the following conditions:
A. If liquid has been spilled on or into the product.
B. If the product has been exposed to rain, water, or other liquids.
C. If the product does not operate normally by following the operating instructions, adjust only
those controls that are covered by the operating instructions. Improper adjustment of other
controls may result in damage and will often require extensive work by a qualified technician
to restore the product to its normal operation.
D. If the product has been dropped or damaged in any way.
E. When the product exhibits a distinct change in performance. This may indicate a need for service.
28. Servicing
Do not attempt to service this product yourself as opening or removing covers may expose you to
dangerous voltages or other hazards. Refer all servicing to a qualified service professional.
29. Replacement Parts
When replacement parts are required, be sure the service technician has used replacement parts
specified by the manufacturer, or have the same characteristics as the original parts. Unauthorized
substitutions may result in fire, electric shock, or other hazards.
30. Safety Check
Upon completion of any service or repairs to this product, ask the service technician to perform
safety checks to determine that the product is in proper operating condition.
FCC statement on regulation
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
-5-
IMPORTANT SAFETY INFORMATION
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio TV technician for help.
This class[B] digital apparatus complies with Canadian ICES-003.
This marking indicates that this product should not be disposed with other household
wastes throughout North America. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, recycle it responsibly to promote
the sustainable reuse of material resources. To return your used device, please use the
return and collection systems or contact the retailer where the product was purchased.
They can take this product for environmental safe recycling.
! WARNING
DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD
This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can
cause severe internal burns in just 2 hours and can lead to death.
Keep new and used batteries away from children. If the battery compartment does not close securely,
stop using the product and keep it away from children.
If you think batteries might have been swallowed or placed inside any part of the body, seek immediate
medical attention.
-6-
TABLE OF CONTENTS
Need Help? ...................................................................................................................... 2
Warnings ......................................................................................................................... 3
Important Safety Information ......................................................................................... 4
What’s Included............................................................................................................... 8
Product Information ........................................................................................................ 8
Operating Instructions ...................................................................................................12
Connecting Power ........................................................................................12
Battery Backup ............................................................................................12
Installing the battery ...................................................................................13
Daylight Saving Time (DST) / Summer Time .................................................13
Setting the Date & Time ...............................................................................14
Setting Alarm 1 & Alarm 2 ...........................................................................15
Alarm Duration ............................................................................................17
Snooze Function ..........................................................................................17
Sleep Timer ..................................................................................................17
Nap Timer ....................................................................................................17
Cycle Display ................................................................................................18
Adjusting LED Brightness .............................................................................18
Listening to the Radio ..................................................................................18
To Set / Recall the Radio Presets ..................................................................18
USB Charging Function ................................................................................19
Troubleshooting .............................................................................................................20
Care and Maintenance ....................................................................................................20
Specifications .................................................................................................................21
Electrohome Warranty ....................................................................................................22
Notes ..............................................................................................................................23
-7-
WHAT’S INCLUDED
• USB Charging Alarm Clock Radio
• Quick Start Guide
• Instructional Manual
• 1 x 3V, CR2032 Flat Lithium battery
PRODUCT INFORMATION
FRONT - LED SCREEN
4
5
1
6
2
7
3
8
1
LED dot appears to the right of PM indicating time is set to PM
2
LED dot appears to the right of
3
Alarm 1 - LED dot appears to the right of
4
Displays the hour
5
Displays the minutes
6
LED dot appears to the left of AM indicating AM Band is selected
7
LED dot appears to the left of FM indicating FM Band is selected
8
Alarm 2 - LED dot appears to the left of
to indicate LED Time Display is set to OFF
-8-
when Alarm 1 is set
when Alarm 2 is set
PRODUCT INFORMATION
FRONT BUTTONS
When set to ON, LED screen shows TIME, YEAR, MONTH/DAY & current temperature
Increases volume
Turns POWER ON/OFF
Decreases volume
REAR PANEL
1
1
A. B. USB Circuit Switch
2
Charges USB devices
2
-9-
PRODUCT INFORMATION
TOP BUTTONS
Set Radio Presets / Nap function
AM / FM
Toggle between AM & FM Radio band / Set ALARM 1
Set ALARM 2
TIME ZONE/
SNOOZE/SLEEP
DIMMER
Set TIME ZONE / SNOOZE / SLEEP / LED Brightness
Set TIME / Y-M-D / 24h-12h Clock ; View Temperature
View D-M-Y / Tune-Scan Radio (BACK)
Set DST / Tune-Scan RADIO (FORWARD) / Select °C OR °F
- 10 -
PRODUCT INFORMATION
BOTTOM
1
2
3
4
1
Battery compartment for 1 x 3V, CR2032 Flat Lithium battery
2
AC Adaptor
3
FM Antenna
4
Indoor Temperature Sensor
- 11 -
OPERATING INSTRUCTIONS
CONNECTING POWER
The USB Charging Alarm Clock Radio is equipped with an "AUTO TIME SET" feature.
When power is connected, the clock display will flash '2' which is TIME ZONE 2
(Eastern time) and the default TIME ZONE setting. The correct time will be displayed,
unless you are in another time zone.
To select TIME ZONE 2 (Eastern time) as your default time zone:
• Press
ONCE to confirm your selection.
To change your time zone upon setup:
/
DST/°C °F until your own time zone appears on the display; press
ONCE to confirm your selection.
To change your time zone after setup:
• Press
• Press and hold the TIME ZONE/SNOOZE/SLEEP/DIMMER button until numbers flash.
• Press
/
DST/°C °F until your own time zone appears on the display; press
ONCE to confirm your selection.
There are 8 programmed times zones:
Zone 0 - Newfoundland time
Zone 1 - Atlantic time
Zone 2 - Eastern time (default)
Zone 3 - Central time
Zone 4 - Mountain time
Zone 5 - Pacific time
Zone 6 - Alaska time
Zone 7 - Hawaiian time
BATTERY BACKUP
This alarm clock is equipped with a battery backup feature. This feature will restore your
alarm clock settings in the event of a power outage. The 3V, CR2032 Flat Lithium battery
is pre-installed at the factory, however, should you need to replace the battery, please
read the following instructions.
- 12 -
OPERATING INSTRUCTIONS
INSTALLING THE BATTERY
1.
2.
3.
4.
Using a small Phillips Head screwdriver, remove the screw from the battery panel on the bottom of the unit.
Remove the battery compartment panel.
Remove/properly dispose of depleted battery and replace with new, 3V, CR2032 Flat Lithium battery.
Close the battery compartment and put screw into place to secure battery panel.
• Batteries must be installed by an adult.
• Use only the recommended size and type of battery specified.
• Please be sure to follow the correct polarity when installing the battery in the battery
compartment. A reversed battery may cause damage to the alarm clock.
• When not using the unit for a prolonged period of time, please remove the batteries to
avoid possible damage caused by leaking batteries.
ATTENTION
• When replacing the battery, do not disconnect AC plug from AC outlet. Current time and alarm will be initialized.
• Do not plug or unplug the power cable if you have wet hands.
• If you are not planning to use the unit for an extended period of time, disconnect the power cable from the wall outlet.
• Do not pull on the cord! You may damage the power cord and may cause an electric shock when disconnecting the
power cord from the wall outlet. Pull firmly at the base of the plug.
DAYLIGHT SAVING TIME (DST) / SUMMER TIME
Daylight Saving Time/Summer Time is automatically preset.
• Daylight saving time begins at: 2:00 AM on the second Sunday of March.
• Standard time begins at: 2:00 AM on the first Sunday of November.
Cancelling / reactivating Automatic DST/Summer Time
1.To CANCEL DST/Summer Time, press and hold the
DST/°C °F button for 3 seconds while the radio is OFF.
2. 'OFF' will appear in the display to show that the Automatic DST/Summer Time
adjustment is cancelled. The display will return to the clock.
- 13 -
OPERATING INSTRUCTIONS
3.To REACTIVATE DST/Summer Time, press and hold the
DST/°C °F button for 3
seconds while the radio is OFF.
4. 'ON' will appear in the display to show that the Automatic DST/Summer Time
adjustment is reactivated. The display will return to the clock.
• The timing of Automatic DST/Summer Time employed by the unit (see above) is
subjected to variations by region and the law in each country/region. In such a
case, cancel the Automatic DST/Summer Time adjustment.
• If you live in a country/region that has not introduced Daylight Saving Time/
Summer Time, you must cancel Automatic DST/Summer Time adjustment before
using the unit.
SETTING THE DATE & TIME
To change the Date/Time, press and hold the
appear in the following order:
button. The settings below will Year > Month > Day > 12/24 H > Hour > Min
1.
2.
3.
Press the
button to DECREASE numbers or to toggle through settings.
Press the
DST/°C °F button to INCREASE numbers or to toggle through the
different settings.
To confirm your selection, press the
button once again.
• LED dot appears to the right of PM indicating time is set to PM; no dot for AM.
• Pressing the
or the
DST/°C °F buttons once, decreases/increases
one number at a time.
• Pressing and holding the
/
DST/°C °F buttons quickly decreases/
increases the numbers.
- 14 -
OPERATING INSTRUCTIONS
SETTING ALARM 1 & ALARM 2
button once to view current alarm setting then press and
To set ALARM 1, press the
hold the button and alarm time will flash. The settings below will appear in the
following order:
AL 1 Hour > AL 1 Min > AL 1 Alarm Modes > AL 1 Radio Station > AL 1 Radio Volume
1.
2.
Press the
/
DST/°C °F buttons to decrease/increase the HOUR; press
button to confirm HOUR. The MINUTES will begin to flash.
the
Press the
/
DST/°C °F buttons to decrease/increase the MINUTES;
press the button to confirm MINUTES. ALARM MODES will flash.
ALARM MODES allows you to set more than one alarm in a week i.e. ALARM 1 set to
wake you Monday-Friday and ALARM 2 set to wake you on weekends. The ALARM MODE
settings are as follows:
1-5 : Monday to Friday 6-7 : Saturday & Sunday
1-7 : Whole week 1-1 : One day of week
NOTE: When selecting 1-1, you must select a specific day as follows: 1=Monday,
2=Tuesday, 3=Wednesday, 4=Thursday, 5=Friday, 6=Saturday, 7=Sunday
3.
4.
5.
Press the
/
DST/°C °F buttons to toggle between the ALARM MODE
settings then press the button to confirm your selection; if 1-1 is selected,
press the
/
DST/°C °F buttons to toggle between the days of the
week and press the button to confirm your selection. The Wake options will
begin to flash.
Press the
/
DST/°C °F buttons to toggle between the Wake options
AM, FM or bu (buzzer); press the button to confirm your selection. The Alarm
Volume selection will begin to flash.
Press the
/
DST/°C °F buttons to decrease/increase the Alarm
Volume; press the button to confirm your selection.
- 15 -
OPERATING INSTRUCTIONS
To set ALARM 2, press the button once to view current alarm setting then press and
hold the button and alarm time will flash. The settings below will appear in the
following order:
AL 2 Hour > AL 2 Min > AL 2 Alarm Modes > AL 2 Radio Station > AL 2 Radio Volume
1.
2.
Press the
/
DST/°C °F buttons to decrease/increase the HOUR; press
to confirm the HOUR. The MINUTES will begin to flash.
Press the
/
DST/°C °F buttons to decrease/increase the MINUTES; press to confirm the MINUTES. ALARM MODES will begin to flash.
The ALARM MODE settings are as follows:
1-5 : Monday to Friday
1-7 : Whole week
6-7 : Saturday & Sunday
1-1 : One day of week
NOTE: When selecting 1-1, you must select a specific day as follows: 1=Monday,
2=Tuesday, 3=Wednesday, 4=Thursday, 5=Friday, 6=Saturday, 7=Sunday
3.
4.
5.
Press the
/
DST/°C °F buttons to toggle between the ALARM MODE
settings; press the button to confirm your selection; if 1-1 is selected, press
the
/
DST/°C °F buttons to toggle between the days of the week
and press the button to confirm your selection. The Wake options will begin to flash.
/
DST/°C °F buttons to toggle between the Wake options
Press the
AM, FM or bu (buzzer); press the button to confirm your selection. The Alarm
Volume selection will begin to flash.
Press the
/
DST/°C °F buttons to decrease/increase the Alarm
Volume; press the button to confirm your selection.
To deactivate ALARM 1 and/or ALARM 2, press and hold the button and/or the
button until the LED is no longer visible on the front LED panel.
- 16 -
OPERATING INSTRUCTIONS
ALARM DURATION
The BUZZER alarm or RADIO alarm will sound for 30 minutes if no key is pressed, then
it will stop automatically and resume to the same alarm time on next scheduled day. To
stop ALARM 1 and/or ALARM 2 when sounding, press the POWER ON/OFF button on
the front of the unit.
SNOOZE FUNCTION
When alarm is sounding, press the SNOOZE/SLEEP button to stop alarm for 9 minutes.
Alarm will resume after 9 minutes.
• Pressing the POWER ON/OFF button on the front of the unit will CANCEL the
Snooze function
• Snooze function will also stop automatically after 30 minutes.
SLEEP TIMER
The sleep timer allows you to listen to music for a preset amount of time ranging from 90
minutes to 10 minutes. It is commonly used by people who prefer to fall asleep to music.
1. Press the POWER ON/OFF button to turn the radio 'ON'.
2. Press the SNOOZE/SLEEP/DIM button to toggle through the preset times; 90min > 60min > 30min > 15min > OFF
3. To cancel the SLEEP timer, press the SNOOZE/SLEEP/DIM button until you see OFF
in the display or press and hold the POWER ON/OFF button.
NAP TIMER
The nap timer allows you to set a buzzer alarm to go off after a preset amount of time
ranging from 90 minutes to 10 minutes.
1. With radio off, press the NAP/SIESTE button to turn on NAP timer.
2. Press the NAP/SIESTE button to toggle through the preset times; 90min > 80min
> 70min > 60min > 50min > 40min > 30min > 20min > 10min > OFF
3. When enabled, pressing the NAP/SIESTE button will show current NAP timer and
pressing again will reset timer to 90 minutes
4. When the NAP timer expires, it will continue to buzz for 30 minutes or it can be
stopped by pressing the POWER ON/OFF button.
5. To cancel the NAP timer, press the NAP/SIESTE button until you see OFF
- 17 -
OPERATING INSTRUCTIONS
CYCLE DISPLAY
The CYCLE DISPLAY function displays the TIME, YEAR, MONTH/DAY & CURRENT
TEMPERATURE on the front LED panel in sequence.
1.
2.
Press and hold the display button on the front of the alarm clock until ‘ON’
appears on the LED panel. Please wait 10 seconds for the cycle to begin.
To return to TIME display only, press and hold until ‘OFF’ appears on the LED panel.
ADJUSTING LED BRIGHTNESS
You can adjust the brightness of the LED display making it brighter, dimmer or even
turning it OFF when the radio is OFF. There are four dimming options available: HIGH/
MEDIUM/LOW/OFF (Standby). Press the DIMMER/GRADATEUR button to toggle
between the four brightness settings.
LISTENING TO THE RADIO
1.
2.
3.
4.
5.
Press the POWER ON/OFF button on the front panel to turn the radio 'ON'.
Press the AM / FM button to toggle between AM and FM radio bands.
Press the
/
DST/°C °F buttons once, to move back/move forward one
station at a time.
Press and hold the
/
DST/°C °F buttons for one second to scan
back/forward through the stations; the unit will automatically scan to the next
broadcasting station.
Press and hold the POWER ON/OFF button on the front panel to turn the radio 'OFF'.
Please ensure that the FM antenna is completely unrolled and extended for best FM reception. The
AM band uses an internal directional aerial. For best reception, please rotate the radio.
TO SET / RECALL THE RADIO PRESETS
1.
2.
Press the POWER ON/OFF button on the front panel to turn the radio 'ON'.
When the radio is 'ON', press the AM / FM button to toggle between AM and
FM radio bands.
- 18 -
OPERATING INSTRUCTIONS
3.
4.
5.
6.
7.
8.
Use the
/
DST/°C °F buttons to select the desired radio station.
Press the SET/NAP button; 'P02' will blink in the display.
Use the
/
DST/°C °F buttons to toggle to the desired preset '
P01-P10' number.
Press the SET/NAP button again to set the preset.
Repeat steps 2 through 4 to set more presets.
To recall a preset station, press the SET/NAP button once to view current preset;
press the SET/NAP again until desired preset station appears on the LED panel.
The unit supports up to 10 AM & 10 FM preset stations.
USB CHARGING FUNCTION
This alarm clock is equipped with a convenient USB charging port on the back panel that
allows you to recharge many brands of smartphones, tablets and portable music players
that come with USB charging cables. To charge your device, connect the USB charging
cable that is connected to your handheld device to the USB charging port on the back
panel of this alarm clock.
IMPORTANT!
When connecting your USB cable to the USB port on this alarm clock please be sure
that the USB symbol on your plug is facing UP when you insert the plug into the
USB port. Observe the charging indicator on your device to confirm that it is charging. If
your device is not charging when the USB selector switch is in the ‘A’ position, slide the
selector switch to the ‘B’ position to begin charging. To improve charging effectiveness,
please turn off and/or refrain from using your device while charging.
Charging time will vary depending on the charging current that your device requires. Therefore, some devices will take longer to charge than others.
- 19 -
TROUBLESHOOTING
Please consult the Troubleshooting chart below before communicating with
ELECTROHOME Customer Support.
SYMPTOM
GENERAL
Power does not come on
RADIO
No Sound
POSSIBLE CAUSE
AC cord not plugged in
Insert plug firmly into AC outlet
Power is not on
Press the POWER ON/OFF button
Turn the VOLUME control up
VOLUME control at minimum
position
Noise or sound distorted
on AM or FM
SYMPTOM
CLOCK
Incorrect Time
Alarm does not turn on
No display
POSSIBLE SOLUTION
AM-interference from traffic
Tune the radio for better AM reception
FM-antenna wire not extended Extend antenna wire
POSSIBLE CAUSE
POSSIBLE SOLUTION
Clock not set
Battery is inserted incorrectly,
or depleted
Alarm is not set to turn on
Set the clock
Check/replace the battery
Activate ALARM 1 or ALARM 2
Clock is not set
Set the clock
Alarm time is not set
Set alarm time for ALARM 1 or ALARM 2
Dimmer is set to Standby Mode Press Dimmer button
CARE AND MAINTENANCE
1. Disconnect the unit from any power sources before cleaning.
2. Keep the unit away from magnetic objects, water or heat sources.
3. Clean only with a dry cloth.
- 20 -
SPECIFICATIONS
Display Size
Display Type
Automatic Time Set
Battery Back-up for Time
PLL Digital Radio Tuner
Radio Station Pre-sets
Dual Alarm
Calendar Display
Indoor Temperature Reading
Adjustable Brightness
Sleep Timer
Battery Required
USB Charging
Speaker Size
Volume Indicator LED
Power Adapter Input
Power Adapter Output
Frequency Range (AM)
Frequency Range (FM)
Power Supply
Number of Alarms
Screen Size
Alarm Options
1.2"
LED
Yes
Yes
Yes
Yes 10 AM / 10 FM
Yes
Yes
Yes
Off, Low, Medium, High
Yes
Lithium, Included (3V CR2032)
Yes, 1000mA
2.0" 0.5W, 8 Ohms
Yes- numerical display of volume value
100-240V 50-60 Hz
5V 1200mA
520-1710 kHz
87.5-107.9 MHz
AC 7.5V 1000mA
2 - with optional weekend skip
4.0"
Gradual Radio / Buzzer
- 21 -
ELECTROHOME® WARRANTY
ELECTROHOME gives the following express warranty to the original consumer purchaser or gift recipient for this ELECTROHOME
product, when shipped in its original container and sold or distributed by ELECTROHOME or by an Authorized ELECTROHOME
Dealer: ELECTROHOME warrants that this product is free, under normal use and maintenance, from any defects in material and
workmanship. If any such defects should be found in this product within the applicable warranty period, ELECTROHOME shall, at
its option, repair or replace the product as specified herein. Replacement parts furnished in connection with this warranty shall
be warranted for a period equal to the unexpired portion of the original equipment warranty.
This warranty shall not apply to:
A.
Any defects caused or repairs required as a result of abusive operation, negligence, accident, improper installation or
inappropriate use as outlined in the owner’s manual.
B.
Any ELECTROHOME product tampered with, modified, adjusted or repaired by any party other than ELECTROHOME or
ELECTROHOME’s Authorized Service Centres.
C.
Damage caused or repairs required as a result of the use with items not specified or approved by ELECTROHOME,
including but not limited to head cleaning tapes and chemical cleaning agents.
D.
Any replacement of accessories, glassware, consumable or peripheral items required through normal use of the
product including but not limited to earphones, remote controls, AC adapters, batteries, stylus, trays, filters, cables,
paper, cabinet, cabinet parts, knobs, buttons, baskets, stands and shelves.
E.
Any cosmetic damage to the surface or exterior that has been defaced or caused by normal wear and tear.
F.
Any damage caused by external or environmental conditions, including but not limited to transmission line/power
line voltage or liquid spillage.
G.
Any product received without appropriate model, serial number and CSA /cUL /cULus /cETL /cETLus markings.
H.
Any products used for rental or commercial purposes.
I.
Any installation, setup and/or programming charges.
Should this ELECTROHOME product fail to operate during the warranty period, warranty service may be obtained upon delivery
of the ELECTROHOME product together with proof of purchase and a copy of this LIMITED WARRANTY statement to an Authorized
ELECTROHOME Service Centre. In-home warranty service may be provided at ELECTROHOME’s discretion on any ELECTROHOME
television with the screen size of 40” or larger. This warranty constitutes the entire express warranty granted by ELECTROHOME
and no other dealer, service centre or their agent or employee is authorized to extend, enlarge or transfer this warranty on
behalf of ELECTROHOME. To the extent the law permits, ELECTROHOME disclaims any and all liability for direct or indirect
damages or losses or for any incidental, special or consequential damages or loss of profits resulting from a defect in material
or workmanship relating to the product, including damages for the loss of time or use of this ELECTROHOME product or the loss
of information. The purchaser will be responsible for any removal, reinstallation, transportation and insurance costs incurred.
Correction of defects, in the manner and period of time described herein, constitute complete fulfillment of all obligations and
responsibilities of ELECTROHOME Electronics to the purchaser with respect to the product and shall constitute full satisfaction of
all claims, whether based on contract, negligence, strict liability or otherwise.
1 YEAR PARTS & LABOUR WARRANTY PERIODS - To obtain the name and address of the nearest Authorized ELECTROHOME
Service Centre or for more information on this warranty
Contact ELECTROHOME Support :
•
Support: electrohome.com/support
•
Website: electrohome.com
•
By mail: ELECTROHOME Customer Service, 4080 Montrose Road, Niagara Falls, ON L2H 1J9
ELECTROHOME is a registered trade-mark of Circus World Displays Limited. 03.2013
- 22 -
NOTES
- 23 -