- No category
advertisement
The Heart of a Centro-Matic
Automated Lubrication System
The P653S is the central pump station that automatically delivers lubricant through a single supply line to each injector in a Centro-Matic system. Individual injectors serve only one lubrication point and may be accurately adjusted to deliver the precise amount of lubrication required. Consult a qualified Lincoln distributor or the Centro-Matic design guide to identify the correct family of injectors for your application.
SL-V SL-1
Min.
.008 cu. in.
(.131 cc)
OUTPUT:
Max.
.080 cu. in.
(1.31 cc)
Min.
.015 cu. in.
(.25 cc)
OUTPUT:
Max.
.080 cu. in.
(1.31 cc)
SL-32
Min.
.001 cu. in.
(.016 cc)
OUTPUT:
Max.
.008 cu. in.
(.131 cc)
SL-V XL
Min.
.015 cu. in.
(.25 cc)
OUTPUT:
Max.
.305 cu. in.
(5.00 cc)
SL-33
Min.
.001 cu. in.
(.016 cc)
OUTPUT:
Max.
.003 cu. in.
(.049 cc)
Min.
.003 cu. in.
(.050 cc)
OUTPUT:
Max.
.024 cu. in.
(.400 cc)
QSL
All Centro-Matic Injectors Have the Following Features:
• Easy installation
• Externally adjustable output
• Indicator pin permits visual check of injector operation
• Easy removal for inspection or replacement without affecting the rest of the system
• Dispenses petroleum-based lubricants with a viscosity up to NLGI No.2
• System design can be easily changed by adding, changing or subtracting injectors or manifolds
Benefits of a Lincoln Automated Lubrication System
• Gain 30 to 45 minutes a day of increased productivity for each machine by lubricating
“on the fly”
• Single supply line throughout the system decreases the potential for leaks and decreases installation costs
• Substantially improve bearing life by delivering frequent, smaller amounts of grease to each bearing
• Lower maintenance cost by eliminating daily manual lubrication and reducing repairs
• Cut grease consumption by delivering exact amount required to each bearing or lube point
• Improve safety by eliminating the daily practice of climbing over or under machinery to lubricate
• Proper lubrication no matter the environment or weather conditions
• Increase resale value of equipment
Lincoln –
The Industry Leader
Since 1910
Continually satisfying our customers with the world’s best lubrication equipment and pumping systems has made Lincoln the largest and most successful company in our field. For almost a century, companies have relied on our technical and quality leadership; our world-class manufacturing and customer service, and our vast network of distributors and support facilities.
Lincoln's Global
Distribution Network
Is The Best In
The Industry
Lincoln distributors provide their customers with a wide variety of lubrication equipment as well as consistent delivery and service.
From small, service-oriented companies to large, integrated suppliers, Lincoln distributors meet the expectations of every customer with just the right level of service and value. You can depend on Lincoln to continue to provide top quality lubrication solutions through the best distribution network in the United States and around the world.
THE REVOLUTIONARY
P653S ELECTRIC
CENTRO-MATIC ® PUMP
Taking Lincoln’s Pump Performance and
Dependability In A Totally New Direction
• First Lincoln Pump That Includes A Reservoir,
Pressure Switch/Transducer, Vent Valve And
Controller In One Compact Unit
• All-In-One Construction Reduces System
Design And Installation Costs
• Fully Programmable Operation
• Versatile - To Meet The Needs Of Numerous
Applications Across Multiple Markets
Lincoln Industrial Corp.
One Lincoln Way
St. Louis, MO 63120-1578
Phone 314.679.4200
Fax 314.679.4359
www.lincolnindustrial.com
Form 444039 (09/09)
© Copyright 2009
Printed in U.S.A.
PUMP AUTOMATICALLY DISPENSES,
VENTS AND RESETS WITH EVERY LUBE EVENT
Perfect for Off-Road Construction,
Industrial & Wind Energy Applications
The fully integrated P653S pump is an example of Lincoln’s commitment to providing innovative, cost-effective solutions through industry-leading advances in technology. This next-generation, lower-cost pump package can be fitted with one of four reservoir sizes and easily adapts to many applications.
P653S Pump Features
• Integrated pump supplies lubricant to a single line parallel lubrication system
• Pumps low- and high-viscosity greases including industry standard NLGI grade 2 grease
• Easily interfaces with telematics technology in today’s heavy equipment
• Operating temperature range from -40°F to +158°F
(-40°C to +70°C) VDC or 32°F to 122°F (0°C to 50°C) VAC*
• Neutral switch allows mobile equipment to remain idling with pump power on but the timer is deactivated – allowing manual lubrication capability at the push of a button.
Benefits
• Integration of major system components reduces labor and overall costs
• Simplifies lubrication system design
• Installation time is reduced due to the "plug-and-play" pump design. Simply mount the pump, connect the power, install the supply line and injectors and the system is ready for operation.
• Eliminates wasted grease by running only when the machine is operating.
* Appropriate greases apply
Full Integration of System
Components and Accessories
The P653S pump is easy to install. The pump's internal controller operates any system using
Lincoln Centro-Matic grease injectors. The high output of the P653S supplies up to 35 SL-V or
SL-1 injectors. The innovative design contains the pump, controller, vent valve and pressure switch or transducer conveniently in one unit.
The P653S pump can be paired with any of Lincoln’s Centro-Matic injectors which include: SLV, SLV-XL, SL-1, SL-32, SL-33, QSL
Reservoir Available in Four Sizes –
4, 8, 15, and 20 Liters Provides
Versatility in Scheduling
Refilling Service
Intervals
Available With or
Without Follower
(shown with follower)
Reservoir
Refill Port
High-Volume
Output
Vent
Valve
Programmable
Controller
120/220-AC or 24-DC Pump
Flexible to Meet the Needs of
Larger Applications
An additional pressure switch or transducer can be added to the end of the system’s supply line for larger applications requiring up to 75’ of
1/4” supply line. Monitoring at both ends of a larger system ensures all injectors dispense during the lube event.
RemoteLinc TM Satellite
Communication
Telematics technology in today’s machines enables companies to remotely monitor their machines to help manage maintenance costs and protect their investments. All
P653S pumps can easily interface with mobile independent telematics systems.
The pump’s built-in RemoteLinc signaling capabilities can be set to alert operators of low grease level and system faults.
INTERNAL COMPONENTS:
• Telematics Signaling Capabilities for
Low Level and System Fault Detection
• Pressure Switch or Transducer
Electrical data
Incoming voltage:
Maximum current:
Frequency:
Operating temperature
DC Pumps
19 to 31 VDC
10 amps
—
-40°F to +158°F (-40°C to +70°C)
Common Electrical Data for DC and AC Pumps
Minimum pause time:
Maximum pause time:
Pause time increments:
Maximum pumping time:
4 min.
59 hrs. 59 min.
1 hr. or 1 min.
12 min.
AC Pumps
100 to 240 VAC
1.7 amps
47 to 63 hz
32°F to 122°F (0°C to 50°C)
Pump P653S
Operating pressure with:
Pressure switch
Pressure transducer (adjustable)
End of line pressure switch and transducer setting
Number of outlets
Output
Pump Elements
Piston diameter:
Number of pumping elements (connected together):
3,500 psig (240 bar)
1,400 to 4,600 psig (96 to 317 bar)
2,500 psig (172 bar)
1
1.5 in3/min (24.6 cm3/min)
7 mm
3
NOTE: All models are designed for grease and include stirring paddle and low-level detection. Pumps include remote signaling cable, relief valve and electrical connectors. External pressure switch or transducer models are listed in the chart below. 15- and 20-liter reservoirs are not listed in this table but can be purchased by contacting your Lincoln representative.
Model
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
80082
80083
80084
80085
80072
80073
80074
80075
80088
80089
80078
80079
80086
80087
80105
80106
80076
80077
80109
80110
80090
80091
80107
80108
80080
80081
80111
80112
120/230
VAC
No. 24 VDC 50/60 Hz
X
X
X
X
X
X
X
X
X
X
X
X
Reservoir
Size (L)
4
4
4
4
4
4
4
4
8
8
8
8
8
8
8
8
8
8
8
8
4
4
4
4
4
4
4
4
Follower
Plate
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Internal
Pressure
Switch
X
X
X
X
X
X
X
X
Internal
Pressure
Transducer
X
X
X
X
X
X
X
X
Internal &
End-of-Line
Pressure Switch Pressure Transducer
X
X
X
X
X
X
Internal &
End-of-Line
X
X
X
X
X
X
Perfect for Off-Road Construction,
Industrial & Wind Energy Applications
The fully integrated P653S pump is an example of Lincoln’s commitment to providing innovative, cost-effective solutions through industry-leading advances in technology. This next-generation, lower-cost pump package can be fitted with one of four reservoir sizes and easily adapts to many applications.
P653S Pump Features
• Integrated pump supplies lubricant to a single line parallel lubrication system
• Pumps low- and high-viscosity greases including industry standard NLGI grade 2 grease
• Easily interfaces with telematics technology in today’s heavy equipment
• Operating temperature range from -40°F to +158°F
(-40°C to +70°C) VDC or 32°F to 122°F (0°C to 50°C) VAC*
• Neutral switch allows mobile equipment to remain idling with pump power on but the timer is deactivated – allowing manual lubrication capability at the push of a button.
Benefits
• Integration of major system components reduces labor and overall costs
• Simplifies lubrication system design
• Installation time is reduced due to the "plug-and-play" pump design. Simply mount the pump, connect the power, install the supply line and injectors and the system is ready for operation.
• Eliminates wasted grease by running only when the machine is operating.
* Appropriate greases apply
Full Integration of System
Components and Accessories
The P653S pump is easy to install. The pump's internal controller operates any system using
Lincoln Centro-Matic grease injectors. The high output of the P653S supplies up to 35 SL-V or
SL-1 injectors. The innovative design contains the pump, controller, vent valve and pressure switch or transducer conveniently in one unit.
The P653S pump can be paired with any of Lincoln’s Centro-Matic injectors which include: SLV, SLV-XL, SL-1, SL-32, SL-33, QSL
Reservoir Available in Four Sizes –
4, 8, 15, and 20 Liters Provides
Versatility in Scheduling
Refilling Service
Intervals
Available With or
Without Follower
(shown with follower)
Reservoir
Refill Port
High-Volume
Output
Vent
Valve
Programmable
Controller
120/220-AC or 24-DC Pump
Flexible to Meet the Needs of
Larger Applications
An additional pressure switch or transducer can be added to the end of the system’s supply line for larger applications requiring up to 75’ of
1/4” supply line. Monitoring at both ends of a larger system ensures all injectors dispense during the lube event.
RemoteLinc TM Satellite
Communication
Telematics technology in today’s machines enables companies to remotely monitor their machines to help manage maintenance costs and protect their investments. All
P653S pumps can easily interface with mobile independent telematics systems.
The pump’s built-in RemoteLinc signaling capabilities can be set to alert operators of low grease level and system faults.
INTERNAL COMPONENTS:
• Telematics Signaling Capabilities for
Low Level and System Fault Detection
• Pressure Switch or Transducer
Electrical data
Incoming voltage:
Maximum current:
Frequency:
Operating temperature
DC Pumps
19 to 31 VDC
10 amps
—
-40°F to +158°F (-40°C to +70°C)
Common Electrical Data for DC and AC Pumps
Minimum pause time:
Maximum pause time:
Pause time increments:
Maximum pumping time:
4 min.
59 hrs. 59 min.
1 hr. or 1 min.
12 min.
AC Pumps
100 to 240 VAC
1.7 amps
47 to 63 hz
32°F to 122°F (0°C to 50°C)
Pump P653S
Operating pressure with:
Pressure switch
Pressure transducer (adjustable)
End of line pressure switch and transducer setting
Number of outlets
Output
Pump Elements
Piston diameter:
Number of pumping elements (connected together):
3,500 psig (240 bar)
1,400 to 4,600 psig (96 to 317 bar)
2,500 psig (172 bar)
1
1.5 in3/min (24.6 cm3/min)
7 mm
3
NOTE: All models are designed for grease and include stirring paddle and low-level detection. Pumps include remote signaling cable, relief valve and electrical connectors. External pressure switch or transducer models are listed in the chart below. 15- and 20-liter reservoirs are not listed in this table but can be purchased by contacting your Lincoln representative.
Model
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
80082
80083
80084
80085
80072
80073
80074
80075
80088
80089
80078
80079
80086
80087
80105
80106
80076
80077
80109
80110
80090
80091
80107
80108
80080
80081
80111
80112
120/230
VAC
No. 24 VDC 50/60 Hz
X
X
X
X
X
X
X
X
X
X
X
X
Reservoir
Size (L)
4
4
4
4
4
4
4
4
8
8
8
8
8
8
8
8
8
8
8
8
4
4
4
4
4
4
4
4
Follower
Plate
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Internal
Pressure
Switch
X
X
X
X
X
X
X
X
Internal
Pressure
Transducer
X
X
X
X
X
X
X
X
Internal &
End-of-Line
Pressure Switch Pressure Transducer
X
X
X
X
X
X
Internal &
End-of-Line
X
X
X
X
X
X
Perfect for Off-Road Construction,
Industrial & Wind Energy Applications
The fully integrated P653S pump is an example of Lincoln’s commitment to providing innovative, cost-effective solutions through industry-leading advances in technology. This next-generation, lower-cost pump package can be fitted with one of four reservoir sizes and easily adapts to many applications.
P653S Pump Features
• Integrated pump supplies lubricant to a single line parallel lubrication system
• Pumps low- and high-viscosity greases including industry standard NLGI grade 2 grease
• Easily interfaces with telematics technology in today’s heavy equipment
• Operating temperature range from -40°F to +158°F
(-40°C to +70°C) VDC or 32°F to 122°F (0°C to 50°C) VAC*
• Neutral switch allows mobile equipment to remain idling with pump power on but the timer is deactivated – allowing manual lubrication capability at the push of a button.
Benefits
• Integration of major system components reduces labor and overall costs
• Simplifies lubrication system design
• Installation time is reduced due to the "plug-and-play" pump design. Simply mount the pump, connect the power, install the supply line and injectors and the system is ready for operation.
• Eliminates wasted grease by running only when the machine is operating.
* Appropriate greases apply
Full Integration of System
Components and Accessories
The P653S pump is easy to install. The pump's internal controller operates any system using
Lincoln Centro-Matic grease injectors. The high output of the P653S supplies up to 35 SL-V or
SL-1 injectors. The innovative design contains the pump, controller, vent valve and pressure switch or transducer conveniently in one unit.
The P653S pump can be paired with any of Lincoln’s Centro-Matic injectors which include: SLV, SLV-XL, SL-1, SL-32, SL-33, QSL
Reservoir Available in Four Sizes –
4, 8, 15, and 20 Liters Provides
Versatility in Scheduling
Refilling Service
Intervals
Available With or
Without Follower
(shown with follower)
Reservoir
Refill Port
High-Volume
Output
Vent
Valve
Programmable
Controller
120/220-AC or 24-DC Pump
Flexible to Meet the Needs of
Larger Applications
An additional pressure switch or transducer can be added to the end of the system’s supply line for larger applications requiring up to 75’ of
1/4” supply line. Monitoring at both ends of a larger system ensures all injectors dispense during the lube event.
RemoteLinc TM Satellite
Communication
Telematics technology in today’s machines enables companies to remotely monitor their machines to help manage maintenance costs and protect their investments. All
P653S pumps can easily interface with mobile independent telematics systems.
The pump’s built-in RemoteLinc signaling capabilities can be set to alert operators of low grease level and system faults.
INTERNAL COMPONENTS:
• Telematics Signaling Capabilities for
Low Level and System Fault Detection
• Pressure Switch or Transducer
Electrical data
Incoming voltage:
Maximum current:
Frequency:
Operating temperature
DC Pumps
19 to 31 VDC
10 amps
—
-40°F to +158°F (-40°C to +70°C)
Common Electrical Data for DC and AC Pumps
Minimum pause time:
Maximum pause time:
Pause time increments:
Maximum pumping time:
4 min.
59 hrs. 59 min.
1 hr. or 1 min.
12 min.
AC Pumps
100 to 240 VAC
1.7 amps
47 to 63 hz
32°F to 122°F (0°C to 50°C)
Pump P653S
Operating pressure with:
Pressure switch
Pressure transducer (adjustable)
End of line pressure switch and transducer setting
Number of outlets
Output
Pump Elements
Piston diameter:
Number of pumping elements (connected together):
3,500 psig (240 bar)
1,400 to 4,600 psig (96 to 317 bar)
2,500 psig (172 bar)
1
1.5 in3/min (24.6 cm3/min)
7 mm
3
NOTE: All models are designed for grease and include stirring paddle and low-level detection. Pumps include remote signaling cable, relief valve and electrical connectors. External pressure switch or transducer models are listed in the chart below. 15- and 20-liter reservoirs are not listed in this table but can be purchased by contacting your Lincoln representative.
Model
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
80082
80083
80084
80085
80072
80073
80074
80075
80088
80089
80078
80079
80086
80087
80105
80106
80076
80077
80109
80110
80090
80091
80107
80108
80080
80081
80111
80112
120/230
VAC
No. 24 VDC 50/60 Hz
X
X
X
X
X
X
X
X
X
X
X
X
Reservoir
Size (L)
4
4
4
4
4
4
4
4
8
8
8
8
8
8
8
8
8
8
8
8
4
4
4
4
4
4
4
4
Follower
Plate
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Internal
Pressure
Switch
X
X
X
X
X
X
X
X
Internal
Pressure
Transducer
X
X
X
X
X
X
X
X
Internal &
End-of-Line
Pressure Switch Pressure Transducer
X
X
X
X
X
X
Internal &
End-of-Line
X
X
X
X
X
X
The Heart of a Centro-Matic
Automated Lubrication System
The P653S is the central pump station that automatically delivers lubricant through a single supply line to each injector in a Centro-Matic system. Individual injectors serve only one lubrication point and may be accurately adjusted to deliver the precise amount of lubrication required. Consult a qualified Lincoln distributor or the Centro-Matic design guide to identify the correct family of injectors for your application.
SL-V SL-1
Min.
.008 cu. in.
(.131 cc)
OUTPUT:
Max.
.080 cu. in.
(1.31 cc)
Min.
.015 cu. in.
(.25 cc)
OUTPUT:
Max.
.080 cu. in.
(1.31 cc)
SL-32
Min.
.001 cu. in.
(.016 cc)
OUTPUT:
Max.
.008 cu. in.
(.131 cc)
SL-V XL
Min.
.015 cu. in.
(.25 cc)
OUTPUT:
Max.
.305 cu. in.
(5.00 cc)
SL-33
Min.
.001 cu. in.
(.016 cc)
OUTPUT:
Max.
.003 cu. in.
(.049 cc)
Min.
.003 cu. in.
(.050 cc)
OUTPUT:
Max.
.024 cu. in.
(.400 cc)
QSL
All Centro-Matic Injectors Have the Following Features:
• Easy installation
• Externally adjustable output
• Indicator pin permits visual check of injector operation
• Easy removal for inspection or replacement without affecting the rest of the system
• Dispenses petroleum-based lubricants with a viscosity up to NLGI No.2
• System design can be easily changed by adding, changing or subtracting injectors or manifolds
Benefits of a Lincoln Automated Lubrication System
• Gain 30 to 45 minutes a day of increased productivity for each machine by lubricating
“on the fly”
• Single supply line throughout the system decreases the potential for leaks and decreases installation costs
• Substantially improve bearing life by delivering frequent, smaller amounts of grease to each bearing
• Lower maintenance cost by eliminating daily manual lubrication and reducing repairs
• Cut grease consumption by delivering exact amount required to each bearing or lube point
• Improve safety by eliminating the daily practice of climbing over or under machinery to lubricate
• Proper lubrication no matter the environment or weather conditions
• Increase resale value of equipment
Lincoln –
The Industry Leader
Since 1910
Continually satisfying our customers with the world’s best lubrication equipment and pumping systems has made Lincoln the largest and most successful company in our field. For almost a century, companies have relied on our technical and quality leadership; our world-class manufacturing and customer service, and our vast network of distributors and support facilities.
Lincoln's Global
Distribution Network
Is The Best In
The Industry
Lincoln distributors provide their customers with a wide variety of lubrication equipment as well as consistent delivery and service.
From small, service-oriented companies to large, integrated suppliers, Lincoln distributors meet the expectations of every customer with just the right level of service and value. You can depend on Lincoln to continue to provide top quality lubrication solutions through the best distribution network in the United States and around the world.
THE REVOLUTIONARY
P653S ELECTRIC
CENTRO-MATIC ® PUMP
Taking Lincoln’s Pump Performance and
Dependability In A Totally New Direction
• First Lincoln Pump That Includes A Reservoir,
Pressure Switch/Transducer, Vent Valve And
Controller In One Compact Unit
• All-In-One Construction Reduces System
Design And Installation Costs
• Fully Programmable Operation
• Versatile - To Meet The Needs Of Numerous
Applications Across Multiple Markets
Lincoln Industrial Corp.
One Lincoln Way
St. Louis, MO 63120-1578
Phone 314.679.4200
Fax 314.679.4359
www.lincolnindustrial.com
Form 444039 (09/09)
© Copyright 2009
Printed in U.S.A.
PUMP AUTOMATICALLY DISPENSES,
VENTS AND RESETS WITH EVERY LUBE EVENT
The Heart of a Centro-Matic
Automated Lubrication System
The P653S is the central pump station that automatically delivers lubricant through a single supply line to each injector in a Centro-Matic system. Individual injectors serve only one lubrication point and may be accurately adjusted to deliver the precise amount of lubrication required. Consult a qualified Lincoln distributor or the Centro-Matic design guide to identify the correct family of injectors for your application.
SL-V SL-1
Min.
.008 cu. in.
(.131 cc)
OUTPUT:
Max.
.080 cu. in.
(1.31 cc)
Min.
.015 cu. in.
(.25 cc)
OUTPUT:
Max.
.080 cu. in.
(1.31 cc)
SL-32
Min.
.001 cu. in.
(.016 cc)
OUTPUT:
Max.
.008 cu. in.
(.131 cc)
SL-V XL
Min.
.015 cu. in.
(.25 cc)
OUTPUT:
Max.
.305 cu. in.
(5.00 cc)
SL-33
Min.
.001 cu. in.
(.016 cc)
OUTPUT:
Max.
.003 cu. in.
(.049 cc)
Min.
.003 cu. in.
(.050 cc)
OUTPUT:
Max.
.024 cu. in.
(.400 cc)
QSL
All Centro-Matic Injectors Have the Following Features:
• Easy installation
• Externally adjustable output
• Indicator pin permits visual check of injector operation
• Easy removal for inspection or replacement without affecting the rest of the system
• Dispenses petroleum-based lubricants with a viscosity up to NLGI No.2
• System design can be easily changed by adding, changing or subtracting injectors or manifolds
Benefits of a Lincoln Automated Lubrication System
• Gain 30 to 45 minutes a day of increased productivity for each machine by lubricating
“on the fly”
• Single supply line throughout the system decreases the potential for leaks and decreases installation costs
• Substantially improve bearing life by delivering frequent, smaller amounts of grease to each bearing
• Lower maintenance cost by eliminating daily manual lubrication and reducing repairs
• Cut grease consumption by delivering exact amount required to each bearing or lube point
• Improve safety by eliminating the daily practice of climbing over or under machinery to lubricate
• Proper lubrication no matter the environment or weather conditions
• Increase resale value of equipment
Lincoln –
The Industry Leader
Since 1910
Continually satisfying our customers with the world’s best lubrication equipment and pumping systems has made Lincoln the largest and most successful company in our field. For almost a century, companies have relied on our technical and quality leadership; our world-class manufacturing and customer service, and our vast network of distributors and support facilities.
Lincoln's Global
Distribution Network
Is The Best In
The Industry
Lincoln distributors provide their customers with a wide variety of lubrication equipment as well as consistent delivery and service.
From small, service-oriented companies to large, integrated suppliers, Lincoln distributors meet the expectations of every customer with just the right level of service and value. You can depend on Lincoln to continue to provide top quality lubrication solutions through the best distribution network in the United States and around the world.
THE REVOLUTIONARY
P653S ELECTRIC
CENTRO-MATIC ® PUMP
Taking Lincoln’s Pump Performance and
Dependability In A Totally New Direction
• First Lincoln Pump That Includes A Reservoir,
Pressure Switch/Transducer, Vent Valve And
Controller In One Compact Unit
• All-In-One Construction Reduces System
Design And Installation Costs
• Fully Programmable Operation
• Versatile - To Meet The Needs Of Numerous
Applications Across Multiple Markets
Lincoln Industrial Corp.
One Lincoln Way
St. Louis, MO 63120-1578
Phone 314.679.4200
Fax 314.679.4359
www.lincolnindustrial.com
Form 444039 (09/09)
© Copyright 2009
Printed in U.S.A.
PUMP AUTOMATICALLY DISPENSES,
VENTS AND RESETS WITH EVERY LUBE EVENT
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project