D-Link Technical Support
Setup Procedure
How to Enable Bridge Mode in DCM-604
Go to 192.168.0.1
Enter the username and password
Username : admin
Password : password
Click on Login
Darren g
Go to Status
Put a tick on Bridge
Click Apply.
Done!!!
If DCM-604 set as bridge, the "basic", "advance" and "firewall" tab of webpage will
be disable. The DCM-604 home page will change to 192.168.100.1. To access home
page, your computer have to set up IP address as 192.168.100.x. After changing
the function, the modem will reboot to take effect setting. Please wait for DCM-604
boot up completed.
Darren g