Samsung CL29T21PQ Specifications

03668A_Latin_ENG_cover
5/19/05
2:19 PM
Page 1
CL29A10
CL34A10
CL29M6
CL21S8MQ
CL25M6MQ
CL29M6MQ
CL29M16MQ
CL29K5MQ
CL29M5MQ
CL25M5MQ
CL21T21PQ
CL29T21PQ
CL21M21PQ
CL29M21PQ
CL21M21MQ
............................................................
.............
Printed in Mexico
AA68-03668A (ENG)
COLOR TELEVISION
Owner’s
Instructions
03668A_Latin_ENG
5/19/05
2:08 PM
Page 2
Important Warranty Information
Regarding Television Format
Viewing
Standard screen format televisions (4:3, the aspect ratio of the screen width to height) are
primarily designed to view standard format full-motion video. The images displayed on
them should primarily be in the standard 4:3 ratio format and constantly moving.
Displaying stationary graphics and images on screen, such as the dark top and bottom
letterbox bars (wide screen pictures), should be limited to no more than 15% of the total
television viewing per week.
Wide screen format televisions (16:9, the aspect ratio of the screen width to height) are
primarily designed to view wide screen format full-motion video. The images displayed
on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the
screen if your model offers this feature, and constantly moving. Displaying stationary
graphics and images on screen, such as the dark side-bars on non-expanded standard
format television video and programming, should be limited to no more than 15% of the
total television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports,
video game displays, station logos, web sites or computer graphics and patterns, should
be limited as described above for all televisions. Displaying any stationary images that
exceed the above guidelines can cause uneven aging of picture tubes (CRTs) that leave subtle,
but permanent burned-in ghost images in the television picture. To avoid this, vary the programming
and images, and primarily display full screen moving images, not stationary patterns or
dark bars. On television models that offer picture sizing features, use these controls to
view the different formats as a full screen picture.
Be careful in the selection and duration of television formats used for viewing. Uneven
CRT aging as a result of format selection and use, as well as other burned-in images, is
not covered by your Samsung limited warranty.
2
03668A_Latin_ENG
5/19/05
2:08 PM
Page 3
CONTENTS
Chapter 1: Your New TV . . . . . . . . . . . . . . . . 5
List of Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Familiarizing Yourself with The TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Front Panel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Front/Side Panel Jacks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Rear Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Remote Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Chapter 2: Installation . . . . . . . . . . . . . . . . . 11
Connecting VHF and UHF Antennas . . . . . . . . . . . . . . . . . . . . . . . . . 11
Antennas with 300-ohm Flat Twin Leads . . . . . . . . . . . . . . . 11
Antennas with 75-ohm Round Leads . . . . . . . . . . . . . . . . . . 12
Separate VHF and UHF Antennas . . . . . . . . . . . . . . . . . . . . . 12
Connecting Cable TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Cable without a Cable Box . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Connecting to a Cable Box that Descrambles All Channels . . 13
Connecting to a Cable Box that Descrambles Some Channels 13
Connecting a VCR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Connecting an S-VHS VCR . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Connecting a Second VCR to Record from the TV. . . . . . . . . 17
Connecting a DVD Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Connecting a Camcorder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Installing Batteries in the Remote Control . . . . . . . . . . . . . . . . . . . . . . 19
Chapter 3: Operation . . . . . . . . . . . . . . . . . . 20
Turning the TV On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Plug & Play Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Viewing the Menus and On-Screen Displays . . . . . . . . . . . . . . . . . . . . 22
Viewing the Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Viewing the Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Selecting a Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Memorizing the Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Selecting the Video Signal-source . . . . . . . . . . . . . . . . . . . . . 24
Storing Channels in Memory (Automatic Method) . . . . . . . . 25
Adding and Erasing Channels (Manual Method). . . . . . . . . . 26
Changing Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Using the Channel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Directly Accessing Channels . . . . . . . . . . . . . . . . . . . . . . . . . 27
Using the PRE-CH Button to select the Previous Channel . . . 27
Labeling the Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Using the Mute Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Setting the Clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Customizing the Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Using Automatic Picture Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Customizing the Sound. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Using Automatic Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Setting the Blue Screen Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Setting The On/Off Melody . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Viewing an External Signal Source . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Setting the Signal Source. . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Assigning Names to External input mode . . . . . . . . . . . . . . . 38
3
03668A_Latin_ENG
5/19/05
2:08 PM
Page 4
CONTENTS
Chapter 4: Special Features . . . . . . . . . . . . . 39
Changing the Color Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Changing the Screen Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Digital Noise Reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
DNIe JrTM (Digital Natural Image engine)
. . . . . . . . . . . . . . . . . . 42
Tilt (Option) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Using the R.Surf Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Choosing a Multi-Channel Sound (MTS) Soundtrack . . . . . . . . . . . . . 45
Extra sound settings (Auto Volume, Turbo Sound or Pseudo Stereo) . . 46
LNA (Low Noise Amplifier). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Setting the On/Off Timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Setting the Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Setting the Preferred Volume Level . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Viewing Closed Captions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Viewing Picture-in-Picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Activating Picture-in-Picture . . . . . . . . . . . . . . . . . . . . . . . . . 52
Selecting a Signal Source (External A/V) for PIP . . . . . . . . . . 53
Swapping the Contents of the PIP image and Main image . . . 54
Changing the Position of the PIP Window . . . . . . . . . . . . . . 55
Changing the PIP Channel . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Changing the Size of the PIP Window. . . . . . . . . . . . . . . . . . 57
Viewing the Demonstration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Customizing Your Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Chapter 5: Troubleshooting . . . . . . . . . . . . . 61
Identifying Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Cleaning and Maintaining Your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Using Your TV in Another Country . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
4
03668A_Latin_ENG
5/19/05
2:08 PM
Page 5
Y Op
UR NEW TV
Cha
ter One
YOUR NEW TV
List of Features
Your TV was designed with the latest technology. This TV is a high-performance unit that
includes the following special features:
• Full Flat Screen
• Easy-to-use remote control
• Easy-to-use on-screen menu system
• Automatic timer to turn the TV on and off
• Adjustable picture and sound settings that can be stored in the TV’s memory
• Automatic channel tuning for up to 181 channels
• A special filter to reduce or eliminate reception problems
• A built-in multi-channel sound decoder for stereo and bilingual listening
• Built-in, dual channel speakers
• A special sleep timer
• Picture in Picture (Depends on the model)
5
03668A_Latin_ENG
5/19/05
2:08 PM
Page 6
YOUR NEW TV
Familiarizing Yourself with The TV
Front Panel Buttons
The buttons on the front panel control your TV’s basic features, including the on-screen
menu. To use the more advanced features, you must use the remote control.
CL29A10/CL34A10
CL29M6/CL25M6MQ/CL29M6MQ
CL29M5MQ/CL25M5MQ
CL29K5MQ
CL29M16MQ
CL21S8MQ
CL21T21PQ/CL29T21PQ
CL21M21PQ/CL29M21PQ/CL21M21MQ
ΠTV/VIDEO (Source)
ˆ Remote Control Sensor
Press to change between viewing TV programs
and signals from other components.
´ MENU
Ø TIMER indicator
Press to see an on-screen menu of your TV's
features.
ˇ VOL – and +
Press to increase or decrease the
volume. Also used to select items on the onscreen menu.
¨ CH
(▼) and CH
(▲)
Press to change channels. Also press to select
various items on the on-screen menu.
6
Aim the remote control towards this spot on the
TV.
When the TV is turned on, the TIMER indicator
blinks five times. This indicator illuminates when
the TIMER mode is set to the “On” position after
setting the clock and either the On timer or Off
timer, with the remote control. Even if the power
is turned off, this indicator stays lit. (Clock must
be set before using this function.)
∏ POWER
Press to turn the TV on and off.
03668A_Latin_ENG
5/19/05
2:08 PM
Page 7
YOUR NEW TV
Front/Side Panel Jacks
You can use the side panel jacks to connect an A/V component that is used only occasionally, such as a camcorder or video game. (For information on connecting equipment,
see page 18.)
CL29A10
CL34A10
CL29M6
CL29T21PQ
CL29M21PQ
CL25M6MQ/CL29M6MQ
CL29K5MQ/CL29M16MQ
CL29M5MQ/CL25M5MQ
CL21T21PQ
CL21M21PQ
CL21M21MQ
CL21S8MQ
ΠAUDIO INPUT jacks
Used to connect the audio
signals from a camcorder or video game.
´ VIDEO INPUT jack
Used to connect a video signal from
a camcorder or video game.
ˇ SUPER VIDEO INPUT jack
S-Video signal from an S-VHS VCR or DVD
player.
Note: In S-Video mode, Audio Output depends
what kind of audio input source is connected to
the side audio input jacks (AV2).
¨ HEADPHONE
Connect a set of external headphones to this jack
for private listening.
7
03668A_Latin_ENG
5/19/05
2:08 PM
Page 8
YOUR NEW TV
Rear Panel Jacks
Use the rear panel jacks to connect an A/V component that will be connected
continuously, such as a VCR or a DVD player.
Because there are two sets of input jacks, you can connect two different A/V
components (i.e., a VCR and a DVD, 2 VCRs, etc.)
For more information on connecting equipment, see pages 11 – 18.
CL29A10/CL34A10
CL21T21PQ/CL21S8MQ
CL21M21PQ/CL21M21MQ
CL29M6/CL29K5MQ/CL29M16MQ/CL29M5MQ
CL25M6MQ/CL29M6MQ/CL25M5MQ/CL29T21PQ
CL29M21PQ
ΠVIDEO INPUT jack
Video signals from VCRs, DVD players and similar
devices.
´ AUDIO INPUTS (INPUT1
and 2)/DVD AUDIO INPUTS
(INPUT 2)
¨ SUPER VIDEO INPUT jack
(Depends on the model)
S-Video signal from an S-VHS VCR or DVD player.
Note: In S-Video mode, Audio Output depends
what kind of audio input source is connected to
the side audio input jacks (AV2).
Audio signals from VCRs, DVD players and similar ˆ COMPONENT VIDEO INPUT
devices.
jacks
Use these jacks to connect the audio signals from
Connect video from a DVD player.
a DVD player when using the DVD video input
Ø ANTENNA
jacks. When not using the DVD jacks, these audio
Connect to an antenna or to a cable TV system.
jacks function as audio for Video 2 or S-VIDEO.
ˇ AUDIO-VIDEO MONITOR
OUTPUT jacks
8
These audio-video signals are identical to A/V
signals being displayed on the big screen.
(Typically used as the input signals for a recording
VCR.)
03668A_Latin_ENG
5/19/05
2:08 PM
Page 9
YOUR NEW TV
Remote Control
You can use the remote control up to about 23 feet from the TV. When using the remote,
always point it directly at the TV.
You can also use your remote control to operate your VCR, DVD and cable box. See page
59 for details.
ΠPOWER
Ô MODE
Turns the TV on and off.
´ S.MODE
Adjust the TV sound by selecting
one of the preset factory settings
(or select your personal, customized sound settings).
ˇ P.MODE
Adjust the TV picture by selecting
one of the preset factory settings
(or select your personal, customized picture settings).
¨ Number buttons
Press to select channels directly
on the TV.
+100
Press to select channels over 100.
For example, to select channel
121, press “+100”, then press “2”
and “1”.
ˆ VOL
-
and VOL
+
Press to increase or decrease the
volume.
Ø MUTE
Press to temporarily cut off
the sound.
∏ SLEEP
Press to select a preset time
interval for automatic shutoff.
” MENU
Displays the main on-screen
menu.
’ P.SIZE
Press to change the screen size.
˝ R.SURF
Press the R.SURF button to automatically return to a preferred
channel after a user-preset time
delay.
Selects a target device to be controlled by the Samsung remote
control (i.e., TV, Set Top Box, VCR,
Cable box, or DVD).
 PRE-CH
Tunes to the previous channel.
Ò TV/VIDEO (Source)
Press to display all of the available
video sources (i.e., AV1, AV2,
S-VIDEO, COMPONENT).
Ú CH
and CH
(Channel Up/Down)
Press CH
channels.
or CH
to change
Æ INFO
Press to see the time, channel,
etc., on-screen. Also press to exit
(quit) the menu system.
ı EXIT
Press to exit the menu.
˜ Up, Down, Left,
Right (▲,▼,œ,√)/
ENTER
Press to select highlight up, down,
left or right. While using the onscreen menus, press ENTER to
activate (or change) a particular
item.
¯ TURBO
Press to select the turbo sound
On or Off.
˘ MTS (Multichannel
Television Stereo)
Press to choose stereo, mono or
Separate Audio Program (SAP
broadcast).
9
03668A_Latin_ENG
5/19/05
2:08 PM
Page 10
YOUR NEW TV
Remote Control
¿ CH. SCAN
Not available.
¸ VCR(DVD, DVR or
STB) Controls
REW (Rewind)
Press to rewind a tape in your
VCR(DVD, DVR or STB).
STOP
Press this button to stop a tape
during play, record, rewind or
fast forward. If the button is
pressed during Full-Automatic
play, the function will be cancelled.
PLAY/PAUSE
Press the PLAY/PAUSE button to
play back prerecorded tapes or
pause the tape.
FF
Press to fast forward the tape in
your VCR(DVD, DVR or STB).
˛ SET
Use this button when you are
setting up your remote control to
operate your Set Top Box, VCR,
Cable box or DVD.
10
◊ PIP Controls
(Depends on the
model)
PIP
Press this button to control the PIP
window.
SIZE
Press to make the PIP window
small window or large window.
SWAP
Exchanges the video signal that is
currently displayed on the main
screen with the signal in the PIP
window.
CH
Displays the available channels in
sequence (These buttons change
channels in the PIP window only).
± RESET
If your remote control is not functioning properly, take out the batteries and press the reset button
for about 2~3 seconds. Re-insert
the batteries and try using the
remote control again.
03668A_Latin_ENG
5/19/05
2:08 PM
Page 11
N
C h aI NpS TAt LeL ATr I OTw
o
I N S TA L L AT I O N
Connecting VHF and UHF Antennas
IP
If your antenna has a set of leads that
look like this, see “Antennas with
300-ohm Flat Twin Leads” below.
s
n
e
).
-
If your antenna has one lead that looks
like this, see “Antennas with 75-ohm
Round Leads”, on page next.
If you have two antennas, see “Separate
VHF and UHF Antennas”, on page next.
Antennas with 300-ohm Flat Twin Leads
If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has
300-ohm twin flat leads, follow the directions below.
1
Place the wires from
the twin leads under
the screws on the 30075 ohm adaptor (not
supplied). Use a
screwdriver to tighten
the screws.
2
Plug the adaptor into
the ANTENNA terminal on the bottom of
the back panel.
11
03668A_Latin_ENG
5/19/05
2:08 PM
Page 12
I N S TA L L AT I O N
Antennas with 75-ohm Round Leads
1
Plug the antenna lead
into the ANTENNA
terminal on the bottom
of the back panel.
Separate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must
combine the two antenna signals before connecting the antennas to the TV. This
procedure requires a an optional combiner-adaptor (available at most electronics shops).
1
Connect both antenna
leads to the combiner.
2
Plug the combiner into
the ANTENNA terminal
on the bottom of the
rear panel.
Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
Cable without a Cable Box
Because this TV is
cable-ready, you do not need a
cable box to view unscrambled cable
channels.
▼
1
Plug the incoming cable
into the ANTENNA
antenna terminal on
back of the TV.
12
03668A_Latin_ENG
5/19/05
2:08 PM
Page 13
I N S TA L L AT I O N
Connecting to a Cable Box that Descrambles All Channels
1
▼
This terminal might be labeled
“ANT OUT”, “VHF OUT” or simply,
“OUT”.
Find the cable that is
connected to the
ANTENNA OUT terminal
on your cable box.
2
Connect the other end
of this cable to the
ANTENNA antenna
terminal on the back of
the TV.
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the
instructions below. You will need a two-way splitter, an RF (A/B) switch and four lengths of
coaxial cable. (These items are available at most electronics stores.)
▼
This terminal might be labeled
“ANT IN”, “VHF IN” or simply,
“IN”.
1
Find and disconnect the
cable that is connected
to the ANTENNA IN
terminal on your
cable box.
2
Connect this cable to a
two-way splitter.
Incoming Cable
Splitter
3
Connect a coaxial cable
between an OUTPUT
terminal on the splitter
and the IN terminal on
the cable box.
Incoming Cable
Splitter
Cable Box
13
03668A_Latin_ENG
5/19/05
2:08 PM
Page 14
I N S TA L L AT I O N
4
Connect a coaxial cable
between the ANTENNA
OUT terminal on the cable
box and the B–IN terminal
on the RF(A/B) switch.
Incoming
Cable
Splitter
RF (A/B)
Switch
Cable Box
5
Connect another cable
between the other OUT
terminal on the splitter
and the A–IN terminal on
the RF (A/B) switch.
Incoming
Cable
Splitter
Cable Box
RF (A/B)
Switch
6
Connect the last coaxial
cable between the OUT
terminal on the RF (A/B)
switch and the ANTENNA
terminal on the rear of the
TV.
Incoming
Cable
Splitter
Cable Box
RF (A/B)
Switch
TV Rear
After you’ve made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to view scrambled channels. (When you set the
A/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which is
usually channel 3 or 4.)
Connecting a VCR
These instructions assume that you have already connected your TV to an antenna or a cable
TV system (according to the instructions on pages 11-14). Skip step 1 if you have not yet
connected to an antenna or a cable system.
1
Unplug the cable or
antenna from the back
of the TV.
2
Connect the cable or
antenna to the
ANTENNA IN terminal on
the back of the VCR.
14
VCR Rear Panel
Incoming
Cable or
Antenna
03668A_Latin_ENG
5/19/05
2:08 PM
Page 15
I N S TA L L AT I O N
3
Connect a coaxial cable
between the ANTENNA
OUT terminal on the
VCR and the antenna
terminal on the TV.
VCR Rear Panel
TV Rear Panel
Coaxial Cable
A coaxial cable is usually included with a VCR. (If not, check your local electronics store).
4
Connect a set of audio
cables between the
AUDIO OUT jacks on the
VCR and the AUDIO
jacks on the TV.
TV Rear Panel
VCR Rear Panel
Audio Cable
5
Connect a video cable
between the VIDEO OUT
jack on the VCR and the
VIDEO jack on the TV.
TV Rear Panel
VCR Rear Panel
Video Cable
Follow the instructions in “Viewing an External Signal Source” to view your VCR tape.
Note: This figure shows the Standard connector-jack panel. The actual configuration for
your TV may be different.
15
03668A_Latin_ENG
5/19/05
2:08 PM
Page 16
I N S TA L L AT I O N
Connecting an S-VHS VCR (Depends on the model)
Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR. (This
connection delivers a better picture as compared to a standard VHS VCR.)
1
To begin, follow steps
1–3 in the previous
section to connect the
antenna or cable to your
VCR and your TV.
VCR Rear Panel
TV Rear Panel
Coaxial Cable
2
Connect a set of audio
cables between the
AUDIO OUT jacks on the
VCR and the 2 AUDIO
INPUT jacks on the TV.
TV Rear Panel
VCR Rear Panel
Audio Cable
Make sure the jacks you are using are underneath the number “2.”
3
Connect an S-video
cable between the
S-VIDEO OUT jack on
the VCR and the
S-VIDEO INPUT
jack on the TV.
TV Rear Panel
VCR Rear Panel
Video Cable
An S-video cable is usually included with an S-VHS VCR. (If not, check your local
electronics store.)
Note: This figure shows the Standard connector-jack panel. The actual configuration for
your TV may be different.
16
03668A_Latin_ENG
5/19/05
2:08 PM
Page 17
I N S TA L L AT I O N
Connecting a Second VCR to Record from the TV
Your TV can send out signals of its picture and sound to be recorded by a second VCR.
To do this, connect your second VCR as follows:
1
TV Rear Panel
VCR Input Panel
Connect a set of audio
cables between the
AUDIO OUT jacks on the
TV and the AUDIO IN
jacks on the VCR.
Audio Cable
(The VCR input jacks might be either on the front or on back of the VCR.)
2
Connect a video cable
between the VIDEO OUT
jack on the TV and the
VIDEO IN jack on the
VCR.
TV Rear Panel
VCR Input Panel
Video Cable
Refer to your VCR’s instructions for more information about how to record using this kind
of connection.
Connecting a DVD Player
The rear panel jacks on your TV make it easy to connect a DVD player to your TV.
1
Connect a set of audio
cables between the
AUDIO INPUT 2 jacks on
the TV and the AUDIO
OUT jacks on the DVD
player.
2
Connect a video cable
between the COMPONENT INPUT (Y, Pb, Pr)
jacks on the TV and the
COMPONENT VIDEO
OUT (Y, Pb, Pr) jacks on
the DVD player.
TV Rear Panel
DVD Player Rear Panel
Audio Cable
TV Rear Panel
DVD Player Rear Panel
Video Cable
Note: For an explanation of Component video, see your DVD player's owner's manual.
Note: This figure shows the Standard connector-jack panel. The actual configuration for
your TV may be different.
17
03668A_Latin_ENG
5/19/05
2:08 PM
Page 18
I N S TA L L AT I O N
Connecting a Camcorder
The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow
you to view the camcorder tapes without using a VCR. (Also see “Viewing an External Signal
Source” on page 37)
1
Locate the A/V output
jacks on the camcorder.
They are usually found
on the side or back of
the camcorder.
2
Connect an audio cable
between the AUDIO
OUTPUT jack on the
camcorder and the
AUDIO terminals on the
side of the TV.
3
Connect a video cable
between the VIDEO
OUTPUT jack on the
camcorder and the
VIDEO terminal on the
side of the TV.
Camcorder
Output Jacks
TV Side Panel
Camcorder
Output Jacks
Audio Cable
Y-Connector
TV Side Panel
Camcorder
Output Jacks
Video Cable
The audio-video cables shown here are usually included with a Camcorder. (If not, check
your local electronics store.) If your camcorder is stereo, you need to connect a set of two
cables.
Note: This figure shows the Standard connector-jack panel. The actual configuration for
your TV may be different.
18
03668A_Latin_ENG
5/19/05
2:08 PM
Page 19
I N S TA L L AT I O N
Installing Batteries in the Remote Control
1
Slide the cover out completely.
Install two AAA size
batteries.
Replace the cover.
Remove the batteries and store
them in a cool, dry place if you won’t
be using the remote control for a
long time.
▼
3
Make sure to match the “+” and
“–” ends of the batteries with the
diagram inside the compartment.
▼
2
The remote control can be used up
to about 23 feet from the TV.
(Assuming typical TV usage, the
batteries last for about one year.)
19
03668A_Latin_ENG
5/19/05
2:08 PM
Page 20
C h a pOtP EeR AT
r I OTN h r e e
O P E R AT I O N
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the front panel.
Plug & Play Feature
When the TV is initially powered On, five basic customer settings proceed automatically
and subsequently: Setting the language, Video signal source, Ant. input check, Auto
program and Clock.
1
Press the POWER button
on the remote control.
The message “Plug &
Play” is displayed.
It flickers for a little while
and then the “Language”
menu is automatically
displayed.
Plug & Play
2
Press the œ or √ button
to select the desired
language.
Setup
Time
Plug & Play
Caption
Language
▼ More
√
√
√
: English
Adjust
Skip
3
Press the MENU button
then the “Ant Input check”
is automatically displayed.
Make sure that the antenna is connected to the TV.
Press the ENTER button
and then the “Channel”
menu is automatically
displayed.
Ant Input check
Auto Program
4
Press the œ or √ button to
select signal source (Air,
STD, HRC, IRC).
Channel
Auto Program
Add/Delete
: Deleted
Air/CATV
: Air
Name
: ----
Adjust
20
Skip
√
√
Skip
03668A_Latin_ENG
5/19/05
2:08 PM
Page 21
O P E R AT I O N
5
Press the MENU button
and then the “Auto
Program” is automatically
displayed.
Auto Program
Air 3
Start
Enter
Skip
6
Press the ENTER button to
start “Auto Program” or
press the MENU button to
return. (refer to “Auto program” on page 25.) The TV
will begin memorizing all of
the available channels.
Auto Program
Air 7
Stop
Enter
Skip
7
Press the ENTER button
and then press the œ or √
button to move the hour or
minute. Set the hour or
minute by pressing the ▲
or ▼ button. (refer to
“Setting the Clock” on
page 30.)
Time
Clock
12 : 00 am
On Timer
- - : - - am
Off Timer
- - : - - am
Sleep Timer : Off
On Timer Volume : 10
Move
Off
Off
Adjust
Return
8
When you have finished,
press the MENU button.
The message “Enjoy your
watching..” is displayed.
Enjoy your watching..
9
If you want to reset this
feature
(1)Press the MENU button.
(2)Press the ▲ or ▼ button
to select the “Setup”,
then press the ENTER
button.
(3)Press the ▲ or ▼ button
to select “Plug & Play”,
then press the ENTER
button. The message
“Plug & Play” is displayed.
Setup
Time
Plug & Play
Caption
Language
▼ More
Move
√
√
√
: English
Enter
Return
Note: Plug & Play feature doesn’t work when in the AV mode.
21
03668A_Latin_ENG
5/19/05
2:08 PM
Page 22
O P E R AT I O N
Viewing the Menus and On-Screen Displays
Viewing the Menus
The on-screen menus disappear
from the screen after two minutes.
▼
1
Input
With the power on, press
the MENU button.
√
√
Source List : TV
Edit Name
The main menu appears
on the screen. Its left side
has five icons: Input,
Picture, Sound, Channel
and Setup.
Move
Enter
Exit
You can also use the MENU, CH
and VOL buttons on the control
panel of the TV to make selections.
▼
2
Use the ▲ and ▼ buttons to highlight one of the 5 icons.
Then press the ENTER button to access the icon’s sub-menu.
3
Press the EXIT button to exit.
Viewing the Display
The display identifies the current channel and the status
of certain audio-video settings.
▼
The on-screen displays
disappear after ten seconds.
1
Press the INFO button.
Air
Signal
The on-screen display
shows any or all of the
following:
Active channel, the
channel label, signal,
picture mode, sound
mode, MTS and the
current time.
22
10
: Mono
Picture : Dynamic
Sound : Custom
MTS
: Stereo
12 : 00 am
03668A_Latin_ENG
5/19/05
2:08 PM
Page 23
O P E R AT I O N
Selecting a Menu Language
1
Press the MENU button to
display the menu.
Press the ▲ or ▼ button
to select “Setup”, then
press the ENTER button.
Setup
Time
Plug & Play
Caption
Language
▼ More
Move
√
√
√
: English
Enter
2
Press the ▲ or ▼ button
to select “Language”.
Setup
Time
Plug & Play
Caption
Language
▼ More
Move
Press the EXIT button to
exit.
√
√
√
: English
Adjust
3
Press the œ or √ button
to select the appropriate
language: “English”,
“Español” or “Português”.
Return
Return
Configuración
Tiempo
Plug & Play
Subtítulo
Idioma
▼ Más
Mover
√
√
√
: Español
Ajustar
Regresar
23
03668A_Latin_ENG
5/19/05
2:08 PM
Page 24
O P E R AT I O N
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (antenna)
and cable channels. After the available channels are memorized, use the CH
and
CH
buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels:
selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the
type of signal source that is connected to the TV (i.e., an antenna or a cable system).
1
Press the MENU button to
display the menu.
Press the ▲ or ▼ button to
select “Channel”, then
press the ENTER button
Channel
Auto Program
Add/Delete
: Deleted
Air/CATV
: Air
Name
: ----
Move
Enter
2
Press the ▲ or ▼ button
to select “Air/CATV”.
Return
Channel
Auto Program
Add/Delete
: Deleted
Air/CATV
: Air
Name
: ----
Move
Adjust
3
Repeatedly press the
œ or √ button to cycle
through these choices:
“Air” (antenna) “STD”,
“HRC” or “IRC” (all cable
TV)
√
√
√
√
Return
Channel
Auto Program
Add/Delete
: Deleted
Air/CATV
: STD
Name
: ----
Move
Adjust
√
√
Return
Press the EXIT button to
exit.
Note: STD, HRC and IRC identify various types of cable
TV systems. Contact your local cable company to identify
the type of cable system that exists in your particular area.
At this point the signal source has been selected. Proceed
to “Storing Channels in Memory” (next page).
24
03668A_Latin_ENG
5/19/05
2:08 PM
Page 25
O P E R AT I O N
Storing Channels in Memory (Automatic Method)
1
First, select the correct
signal source (Air, STD,
HRC, IRC). See steps 1~3
on previous page.
Channel
Move
Adjust
2
Press the ▲ or ▼ button
to select “Auto program”
and then press the ENTER
button.
The “Auto Program” is
automatically displayed.
√
√
Auto Program
Add/Delete
: Deleted
Air/CATV
: Air
Name
: ----
Return
Channel
√
√
Auto Program
Add/Delete
: Deleted
Air/CATV
: Air
Name
: ----
Move
Enter
Return
▼
The TV automatically cycles
through all of the available channels
and stores them in memory. This
takes about one to two minutes.
3
Press the ENTER button
to start "Auto Program".
The TV will begin
memorizing all of the
available channels.
After all the available
channels are stored, the
Channel menu reappears.
Press the MENU button to
skip and press the ENTER
button to stop.
Press the EXIT button to
exit.
Auto Program
Air 3
Start
Enter
Return
Auto Program
Air 5
Stop
Enter
Return
25
03668A_Latin_ENG
5/19/05
2:08 PM
Page 26
O P E R AT I O N
Adding and Erasing Channels (Manual Method)
First, press the CH
or CH
button or the number buttons
to select the channel you want to add or delete.
1
Press the MENU button to
display the menu.
Press the ▲ or ▼ button
to select “Channel”, then
press the ENTER button.
Channel
Auto Program
Add/Delete
: Deleted
Air/CATV
: Air
Name
: ----
Move
Enter
2
Press the ▲ or ▼ button
to select “Add/Delete”,
then press the ENTER
button.
Channel
Enter
3
Press the EXIT button to
exit.
26
Return
Auto Program
Add/Delete
: Deleted
Air/CATV
: Air
Name
: ----
Move
Press the ▲ or ▼ button
to select “Added” or
“Deleted” then press the
ENTER button.
√
√
√
√
Return
Channel
Auto Program
Deleted
Add/Delete
: Deleted
Added
Air/CATV
: Air
Name
: ----
Move
Enter
√
Return
03668A_Latin_ENG
5/19/05
2:08 PM
Page 27
O P E R AT I O N
Changing Channels
Using the Channel Buttons
1
Press the CH
or CH
button to change channels.
When you press CH
or CH
, the TV changes channels in sequence. You will see all the
channels that the TV has memorized. (The TV must have memorized at least three channels.)
You will not see channels that were either erased or not memorized.
Directly Accessing Channels
Use the number buttons to quickly tune to any channel.
1
Press the number buttons to go directly to a channel. For example,
to select channel 27, press “2” then “7”. The TV will change channels when you press the second number.
When you use the number buttons, you can directly select channels that were either erased
or not memorized.
To select a channel over 100, press the +100 button. (For channel 122, press “+100” then “2”
then “2”.)
To change to single-digit channels (0–9) faster, press “0” before the single digit.
(For channel “4” press “0” then “4”.)
Using the PRE-CH Button to select the Previous Channel
Press the PRE-CH button.
The TV will switch to the
last channel viewed.
To quickly switch between two
channels that are far apart, tune to
one channel, then use the number
button to select the second channel.
Then, use the PRE-CH button to
quickly alternate between them.
▼
1
27
03668A_Latin_ENG
5/19/05
2:08 PM
Page 28
O P E R AT I O N
Labeling the Channels
Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”,
“ESPN”, “PBS2”, CNN1”, etc.) A label consists of four fields, where each field is a letter,
a number, “*”, or a blank. When the INFO button is pressed, the channel label will
appear next to the channel number.
1
Press the CH
or CH
button to tune to the
channel that will be
labeled.
Air 11
Press the MENU button to
display the menu.
Press the ▲ or ▼ button
to select “Channel”, then
press the ENTER button.
Channel
Auto Program
Add/Delete
: Deleted
Air/CATV
: Air
Name
: ----
Move
Enter
3
Press the ▲ or ▼ button to
select “Name”.
Press the √ button to
begin labeling. The leftmost field will be highlight.
(Each label has four fields.
See top paragraph.)
Channel
Move
Enter
Channel
Adjust
5
Press the EXIT button to
exit.
28
√
√
Return
Auto Program
Add/Delete
: Deleted
Air/CATV
: Air
Name
: P---
Move
Press the √ button to
switch to the next field,
which will be highlight.
Select a second letter or
digit using the ▲ or ▼
button, as above.
Repeat the process to
select the last two digits.
√
√
Return
Auto Program
Add/Delete
: Deleted
Air/CATV
: Air
Name
: ----
4
Press the ▲ or ▼ button
to select a letter, a number,
“*” or a blank.
(Pressing ▲ or ▼ button
results in this sequence:
A, B,...Z, *, blank, 0, 1, ...9).
Note: You cannot select “Name”
in the AV mode.
▼
2
√
√
Return
Channel
Auto Program
Add/Delete
: Deleted
Air/CATV
: Air
Name
: PBS2
Move
Adjust
√
√
Return
03668A_Latin_ENG
5/19/05
2:08 PM
Page 29
O P E R AT I O N
Adjusting the Volume
Press the VOL + or – VOL – button to increase or decrease the volume.
Using the MUTE Button
At any time, you can temporarily cut off the sound using the MUTE button.
1
Press the MUTE button and
the sound cuts off.
The word “Mute” will
appear in the lower-left
corner of the screen.
Mute
2
To turn mute off, press the MUTE button again, or simply press
either the VOL + or VOL – button.
29
03668A_Latin_ENG
5/19/05
2:08 PM
Page 30
O P E R AT I O N
Setting the Clock
1
Press the MENU button to
display the menu.
Press the ▲ or ▼ button
to select “Setup”, then
press the ENTER button.
Setup
Time
Plug & Play
Caption
Language
▼ More
Move
√
√
√
: English
Enter
Press the ENTER button
again to select the hours.
(the hours digits will be
highlighted).
Press the ▲ or ▼ button
repeatedly until the
correct hour appears.
Time
Clock
09: - - am
On Timer
- - : - - am
Off Timer
- - : - - am
Sleep Timer : Off
On Timer Volume : 10
Move
Adjust
30
You can change the hours by pressing
the ▲ or ▼ button repeatedly (or by
holding down either of these buttons).
Return
Time
Clock
09: 30 am
On Timer
- - : - - am
Off Timer
- - : - - am
Sleep Timer : Off
On Timer Volume : 10
Move
After selecting the correct minutes,
press the √ button.
Press the EXIT button to exit.
Off
Off
The time will appear every time
you press the INFO button.
▼
3
After the hour is entered,
Press the √ button.
(at this point the minutes
digits will be highlighted).
Press the ▲ or ▼ button
to select the correct
minutes.
When selecting the hours, be sure
to select the proper time of day (am or
pm).
▼
2
Press the ENTER button.
Return
Adjust
Off
Off
Return
e
r
.
03668A_Latin_ENG
5/19/05
2:08 PM
Page 31
O P E R AT I O N
Customizing the Picture
You can use the on-screen menus to change the Contrast, Brightness, Sharpness, Color,
Tint and according to personal preference. (Alternatively, you can use one of the
“Automatic” settings. See next page.)
1
Press the MENU button to
display the menu.
Press the ▲ or ▼ button
to select “Picture”, then
press the ENTER button.
Picture
Mode
Custom
Color tone
Size
▼ More
Move
: Normal
: Normal
Enter
2
Press the ▲ or ▼ button
to select “Custom”, then
press the ENTER button.
(The words Contrast,
Brightness, Sharpness,
Color and Tint will appear
on the screen.)
Return
Picture
Mode
Custom
Color tone
Size
▼ More
Move
√
√
√
√
: Custom
: Normal
: Normal
Enter
Return
After adjusting an item, the gauge
will automatically disappear (after
about 10 seconds).
▼
3
Press the ▲ or ▼ button
to select a particular
item, then press the
ENTER button.
√
√
√
√
: Custom
Custom
Contrast
Brightness
Sharpness
Color
Tint
Move
:
:
:
:
:
80
50
50
50
G50 R50
Enter
Return
4
Press the œ or √ button
to increase or decrease
the value of a particular
item.
For example, if
you select “Brightness”,
pressing the √ button
increases it.
Brightness
Move
55
Adjust
Return
Press the EXIT button to
exit.
31
03668A_Latin_ENG
5/19/05
2:08 PM
Page 32
O P E R AT I O N
Using Automatic Picture Settings
Your TV has three automatic picture settings (“Dynamic”, “Standard” and “Movie” ) that
are preset at the factory. You can activate either Dynamic, Standard, Movie or Custom
by pressing the P.MODE button (or by making a selection from the menu). Or, you can
select “Custom” which automatically recalls your personalized picture settings.
1
Picture
Press the MENU button to
display the menu.
Press the ▲ or ▼ button
to select “Picture”, then
press the ENTER button.
Mode
Custom
Color tone
Size
▼ More
Move
: Custom
: Normal
: Normal
Enter
2
√
√
√
√
Return
Picture
Press the ENTER button
again.
Press the ▲ or ▼ button
to select the “Dynamic”,
“Standard” “Movie” or
“Custom” picture setting,
then press the ENTER
button.
Mode
Custom
Color tone
Size
▼ More
Move
Dynamic
: Custom
Standard
Movie
: Normal
Custom
: Normal
Enter
Return
Press the EXIT button to
exit.
•
•
•
•
32
Choose Dynamic for viewing the TV during the day or when there is
brightlight in the room.
Choose Standard for the standard factory settings.
Choose Movie when viewing the movie.
Choose Custom if you want to adjust the settings accordings to personal
preference (see “Customizing the Picture”, page 31).
03668A_Latin_ENG
5/19/05
2:08 PM
Page 33
O P E R AT I O N
Customizing the Sound
You can use the on-screen menus to adjust the bass, treble and balance according
to individual preference. (Alternatively, you can use one of the “automatic” settings.
See next page.)
1
Press the MENU button
to display the menu.
Press the ▲ or ▼ button
to select the “Sound”,
then press the ENTER
button.
Sound
Move
Enter
2
Press the ▲ or ▼ button
to select “Custom”, then
press the ENTER button.
Return
Sound
√
√
√
√
Mode
: Custom
Custom
MTS
: Stereo
Auto Volume : Off
▼ More
Move
Enter
3
Press the ▲ or ▼ button
to select a particular
item, then press the
ENTER button.
√
√
√
√
Mode
: Custom
Custom
MTS
: Stereo
Auto Volume : Off
▼ More
Return
Custom
Bass
Treble
Balance
Move
: 50
: 50
: L 50 R 50
Enter
Return
4
Press the œ or √ button
to increase or decrease
the value of a particular
item.
For example, if you select
“Treble”, pressing the √
button increases it.
Treble
Move
55
Adjust
Return
Press the EXIT button to
exit.
33
03668A_Latin_ENG
5/19/05
2:08 PM
Page 34
O P E R AT I O N
Using Automatic Sound Settings
Your TV has four automatic sound settings (“Standard”, “Music”, “Movie” and “Speech”)
that are preset at the factory. You can activate either Standard, Music, Movie or Speech
by pressing the S.MODE button (or by making a selection from the menu). Or, you can
select “Custom”, which automatically recalls your personalized sound settings.
1
Sound
Press the MENU button
to display the menu.
Press the ▲ or ▼ button
to select the “Sound”,
then press the ENTER
button.
Mode
: Custom
Custom
MTS
: Stereo
Auto Volume : Off
▼ More
Move
Enter
2
√
√
√
√
Return
Sound
Press the ENTER button
again.
Press the ▲ or ▼ button
repeatedly to select the
“Standard”, “Music”
“Movie”, “Speech” or
“Custom” sound settings,
then press the ENTER
button.
Mode
: Standard
Custom
Music
Custom
Movie
MTS
: Speech
Mono
Auto Volume : Custom
Off
▼ More
Move
Enter
Return
Press the EXIT button to
exit.
•
•
•
•
•
34
Choose Standard for the standard factory settings.
Choose Music when watching music videos or concerts.
Choose Movies when watching movies.
Choose Speech when watching a show that is mostly dialogue (i.e., news).
Choose Custom to recall your personalized settings.
(see “Customizing the Sound”, page 33).
03668A_Latin_ENG
5/19/05
2:08 PM
Page 35
O P E R AT I O N
Setting the Blue Screen Mode
If no signal is being received or the signal is very weak, a blue screen automatically
replaces the noisy picture background. If you wish to continue viewing the poor picture,
you must set the “Blue Screen” mode to “Off”.
1
Press the MENU button to
display the menu.
Press the ▲ or ▼ button
to select the “Setup”, then
press the ENTER button.
Setup
Time
Plug & Play
Caption
Language
▼ More
Move
√
√
√
: English
Enter
2
Press the ▲ or ▼ button
to select "Blue Screen",
then press the ENTER
button.
Return
Setup
▲ More
Blue Screen : On
Melody
: On
Demonstration
Move
Enter
√
√
√
Return
Pressing the ▲ or ▼ button will
alternate between “On” and “Off”.
▼
3
Press the ▲ or ▼ button
to select Blue Screen
“On”, then press the
ENTER button.
Press the EXIT button to
exit.
Setup
▲ More
Blue Screen : On
Off
On
Melody
: On
Demonstration
Move
Enter
√
√
Return
35
03668A_Latin_ENG
5/19/05
2:08 PM
Page 36
O P E R AT I O N
Setting The On/Off Melody
You can hear clear a melody sound when the TV is powered On or Off.
1
Press the MENU button to
display the menu.
Press the ▲ or ▼ button
to select the “Setup”, then
press the ENTER button.
Setup
Time
Plug & Play
Caption
Language
▼ More
Move
√
√
√
: English
Enter
Return
2
Press the ▲ or ▼ button
to select “Melody”, then
press the ENTER button.
Setup
▲ More
Blue Screen : On
Melody
: On
Demonstration
Move
Enter
Return
3
Press the ▲ or ▼ button
to select “On”, then press
the ENTER button.
√
√
√
Setup
▲ More
Blue Screen :
Melody
:
Demonstration
On
On
Off
√
On
√
Press the EXIT button to
exit.
Move
36
Enter
Return
03668A_Latin_ENG
5/19/05
2:08 PM
Page 37
O P E R AT I O N
Viewing an External Signal Source
Use the remote control to switch between viewing signals from connected equipment,
such as VCRs, DVD, Set-Top Box and the TV source (broadcast or cable).
Setting the Signal Source
Press the MENU button to
display menu, then press
the ENTER button.
Input
√
√
Source List : TV
Edit Name
Move
Enter
2
Press the ENTER button
again.
Press the ▲ or ▼ button
to select signal source,
then press the ENTER
button.
Quick way to access the external
signal source: Just press the
“TV/VIDEO (Source)” button on the
remote control.
▼
1
Return
Source List
TV
AV1
AV2
S-Video
Component
Move
------------Enter
Return
AV 1
37
03668A_Latin_ENG
5/19/05
2:08 PM
Page 38
O P E R AT I O N
Assigning Names to External input mode
1
Press the MENU button to
display menu, then press
the ENTER button.
Input
√
√
Source List : TV
Edit Name
Move
Enter
Return
2
Press the ▲ or ▼ button
to select the “Edit
Name”, then press the
ENTER button.
Input
Move
Enter
3
Press the ▲ or ▼ button
to select the Source List,
then press the ENTER
button.
:
:
:
:
Enter
4
Set other signal sources
(AV2, S-Video,
Component) using the
same method as listed
above.
Press the EXIT button to
exit.
38
Return
Edit Name
AV1
AV2
S-Video
Component
Move
Press the ▲ or ▼ button
to select external device
( VCR, DVD, Cable STB,
Sat. STB, AV Recv, DVD
Recv, Game, Camcorder,
DVD Combo), then press
the ENTER button.
√
√
Source List : AV1
Edit Name
√
√
√
√
-------------
Return
Edit Name
AV1
AV2
S-Video
Component
:
:
:
:
--VCR
-- ----DVD
--Cable STB
-Sat.
- -STB
AV Recv
-DVD
- -Recv
-
√
√
√
√
Game
Camcorder
DVD Combo
Move
AV 1 VCR
Enter
Return
03668A_Latin_ENG
5/19/05
2:08 PM
Page 39
C I A L F E AT U R E S
C hSaP Ep
ter Four
S P E C I A L F E AT U R E S
Changing the Color Tone
1
Press the MENU button to
display the menu.
Press the ▲ or ▼ button
to select the “Picture”,
then press the ENTER button.
Picture
Mode
Custom
Color tone
Size
▼ More
Move
: Custom
: Normal
: Normal
Enter
Return
2
Press the ▲ or ▼ button
to select “Color tone”,
then press the ENTER button.
Picture
Mode
Custom
Color tone
Size
▼ More
Move
: Custom
: Normal
: Normal
Enter
Press the EXIT button to
exit.
√
√
√
√
Return
3
Press the ▲ or ▼ button
to select “Cool2”, “Cool1”,
”Normal”, “Warm1” or
“Warm2” according to
personal preference, then
press the ENTER button.
√
√
√
√
Picture
Mode
Custom
Color tone
Size
▼ More
Move
: Custom
Cool2
: Normal
Cool1
: Normal
Normal
√
√
√
Warm1
Warm2
Enter
Return
39
03668A_Latin_ENG
5/19/05
2:08 PM
Page 40
S P E C I A L F E AT U R E S
Changing the Screen Size
Quick way to access the Screen size:
Just press the P.SIZE button on the
remote control.
▼
1
Press the MENU button to
display the menu.
Press the ▲ or ▼ button
to select the “Picture”,
then press the ENTER button.
Picture
Mode
Custom
Color tone
Size
▼ More
Move
: Custom
: Normal
: Normal
Enter
Return
2
Press the ▲ or ▼ button
to select “Size”, then
press the ENTER button.
√
√
√
√
Picture
Mode
Custom
Color tone
Size
▼ More
Move
: Custom
: Normal
: Normal
Enter
√
√
√
√
Return
Notes: Screen size cannot be
changed in the PIP mode.
(Depends on the model)
▼
3
Press the ▲ or ▼ button
to select “Normal” or
“Zoom”, then press the
ENTER button.
Press the EXIT button to
exit.
Picture
Mode
Custom
Color tone
Size
▼ More
Move
: Custom
: Normal
Normal
: Normal
√
√
√
Zoom
Enter
Return
• Normal (4:3) : Sets the picture to 4:3 normal mode.
• Zoom :
Magnifies the size of the picture on screen.
40
ize:
03668A_Latin_ENG
5/19/05
2:08 PM
Page 41
S P E C I A L F E AT U R E S
Digital Noise Reduction
If the broadcast signal received by your TV is weak, you can activate the Digital Noise
Reduction feature to help reduce any static and ghosting that may appear on the screen.
1
Press the MENU button to
display the menu.
Press the ▲ or ▼ button
to select the “Picture”,
then press the ENTER button.
Picture
Mode
Custom
Color tone
Size
▼ More
Move
: Custom
: Normal
: Normal
Enter
2
Press the ▲ or ▼ button
to select “Digital NR”,
then press the ENTER button.
√
√
√
√
Return
Picture
▲ More
Digital NR
Tilt
Move
: Off
: 0
Enter
√
Return
Pressing the ▲ or ▼ button will
alternate between “On” and “Off”.
▼
3
Press the ▲ or ▼ button
to select “On”, then press
the ENTER button.
Picture
▲ More
Digital NR
Tilt
Off
: Off
: 0On
Press the EXIT button to
exit.
Move
Enter
Return
41
03668A_Latin_ENG
5/19/05
2:08 PM
Page 42
S P E C I A L F E AT U R E S
DNIe JrTM (Digital Natural Image engine)
(Depends on the model)
Samsung’s New Technology enables an improved image with detail, contrast and white
enhancement and 3D noise reduction.
1
Press the MENU button to
display the menu.
Press the ▲ or ▼ button
to select the “Picture”,
then press the ENTER button.
Picture
Mode
Custom
Color tone
Size
▼ More
Move
: Custom
: Normal
: Normal
Enter
Return
2
Press the ▲ or ▼ button
to select "DNIe Jr”, then
press the ENTER button.
Picture
▲ More
Digital NR
DNIe Jr
Tilt
Move
√
√
Return
DNIe Jr
Press the œ or √ button
to select “On”, then press
the ENTER button.
Off
Adjust
42
: Off
: On
: 0
Enter
3
Press the EXIT button to
exit.
√
√
√
√
On
Enter
Return
03668A_Latin_ENG
5/19/05
2:09 PM
Page 43
S P E C I A L F E AT U R E S
Tilt (Depends on the model)
Due to the Earth’s magnetic field there may be same minor image tilt depending
on the TV’s location. When this occurs, follow the steps below.
1
Press the MENU button to
display the menu.
Press the ▲ or ▼ button
to select the “Picture”,
then press the ENTER button.
Picture
Mode
Custom
Color tone
Size
▼ More
Move
: Custom
: Normal
: Normal
Enter
2
Press the ▲ or ▼ button
to select “Tilt”.
Return
Picture
▲ More
Digital NR
Tilt
Move
: Off
: 0
Adjust
3
Press the œ or √ button
to adjust the Tilt.
√
√
√
√
√
Return
Picture
▲ More
Digital NR
Tilt
: Off
: 2
√
Press the EXIT button to
exit.
Move
Adjust
Return
43
03668A_Latin_ENG
5/19/05
2:09 PM
Page 44
S P E C I A L F E AT U R E S
Using the R.Surf Feature
This feature allows you to set the TV to return to a particular channel after a certain
amount of time. For example, you may be watching a channel when commercials start.
You can set the R.Surf to “5 minutes”, then switch channels. After minutes, the TV will
return to the original channel. To use the R.Surf feature:
1
While you are watching
the channel to which you
want to return, press the
R.SURF button. The onscreen display will read
“Surf Off”.
Surf
Off
▼
The time will be decreasing while
you are setting up the timer. And you
will reset it when you pass five minutes
or turn it off.
2
Press the R.SURF button
again to set the timer in
thirty second intervals, up
to five minutes.
Surf
0: 30
3
The time you set will begin counting down on the screen.
When the time runs out, the TV will return to the channel
you were watching when you set the timer.
44
03668A_Latin_ENG
5/19/05
2:09 PM
Page 45
S P E C I A L F E AT U R E S
Choosing a Multi-Channel Sound (MTS)
Soundtrack
Depending on the particular program being broadcast, you can listen to Stereo, Mono, or
a Separate Audio Program. (SAP audio is usually a foreign-language translation.
Sometimes SAP has unrelated information like news or weather.)
Quick way to access the MTS:
Just press the “MTS” button on the
remote control.
▼
1
Sound
Press the MENU button to
display the menu.
Press the ▲ or ▼ button
to select the “Sound”,
then press the ENTER button.
le
u
tes
Mode
: Custom
Custom
MTS
: Stereo
Auto Volume : Off
▼ More
Move
Enter
2
√
√
√
√
Return
Sound
Press the ▲ or ▼ button
to select the “MTS”, then
press the ENTER button.
Mode
: Custom
Custom
MTS
: Stereo
Auto Volume : Off
▼ More
Move
Enter
√
√
√
√
Return
The text at the bottom of the
menu tells you if the incoming
audio is Mono, Stereo or SAP.
▼
3
Sound
Press the ▲ or ▼ button
to select “Mono”, “Stereo”
or “SAP”, then press the
ENTER button.
Press the EXIT button to
exit.
•
•
•
Mode
: Custom
Custom
MTS
: Mono
Mono
Auto Volume : Stereo
Off
SAP
▼ More
Move
Enter
√
√
√
Return
Choose Mono for channels that are broadcasting in mono, or if you are
having difficulty receiving a stereo signal.
Choose Stereo for channels that are broadcasting in stereo.
Choose SAP to listen to the Separate Audio Program, which is usually a
foreign-language translation.
45
03668A_Latin_ENG
5/19/05
2:09 PM
Page 46
S P E C I A L F E AT U R E S
Extra sound settings (Auto Volume, Turbo
Sound or Pseudo Stereo)
The following sound settings can be adjusted to suit your personal preferences
• Auto Volume
Each broadcasting station has its own signal conditions, which can make it necessary
to adjust the volume every time the channel is changed. “Auto Volume” lets you
automatically adjust the volume of the desired channel by lowering the sound out
put when the modulation signal is high or by raising the sound output when the
modulation signal is low.
• Turbo Sound
Turbo Sound emphasizes the bass and treble frequencies to add fullness to the sound.
You can select the Turbo Sound by simply pressing the “TURBO” button on the remote
control.
• Pseudo Stereo
“Pseudo Stereo” converts a monaural sound signal into two identical left and right
channels. Once the “Pseudo Stereo” is set to “On” or “Off”, the setting applies to the
sound effects such as “Standard”, “Music”, “Movie” and “Speech”.
1
Press the MENU button to
display the menu.
Press the ▲ or ▼ button
to select the “Sound”,
then press the ENTER button.
Sound
Mode
: Custom
Custom
MTS
: Mono
Auto Volume : Off
▼ More
Move
Enter
2
Press the ▲ or ▼ button
to select the required
item (Auto Volume, Turbo
Sound, Pseudo Stereo),
then press the ENTER
button.
Sound
Enter
3
Press the EXIT button to
exit.
46
Return
Mode
: Custom
Custom
MTS
: Mono
Auto Volume : Off
Off
On
▼ More
Move
Press the ▲ or ▼ button
to select “On”, then press
the ENTER button.
√
√
√
√
√
√
√
Return
Sound
Mode
: Custom
Custom
MTS
: Mono
Auto Volume : Off
Off
On
▼ More
Move
Enter
√
√
√
Return
03668A_Latin_ENG
5/19/05
2:09 PM
Page 47
S P E C I A L F E AT U R E S
LNA (Low Noise Amplifier) (Depends on the
model)
If the TV is operating in a weak-signal area, sometimes the LNA function can improve
the reception (a low-noise preamplifier boosts the incoming signal).
1
Press the MENU button to
display the menu.
Press the ▲ or ▼ button
to select the “Channel”,
then press the ENTER button.
Channel
Auto Program
Add/Delete
Air/CATV
Name
LNA
Move
:
:
:
:
Deleted
Air
---Off
Enter
√
Return
2
Press the ▲ or ▼ button
to select “LNA”, then
press the ENTER button.
√
√
Channel
Auto Program
Add/Delete
Air/CATV
Name
LNA
Move
:
:
:
:
Deleted
Air
---Off
Enter
√
√
√
Return
Pressing ▲ or ▼ will alternate
between “On” and “Off”.
▼
3
Press the ▲ or ▼ button
to select “On”, then press
the ENTER button.
Press the EXIT button to
exit.
Channel
Auto Program
Add/Delete
Air/CATV
Name
LNA
Move
:
:
:
:
Enter
Deleted
Air
---Off
Off
√
√
On
Return
47
03668A_Latin_ENG
5/19/05
2:09 PM
Page 48
S P E C I A L F E AT U R E S
Setting the On/Off Timer
Before using the timer, you must
set the TV’s clock. (See “Setting the
Clock” on page 30).
▼
1
Press the MENU button to
display the menu.
Press the ▲ or ▼ button
to select the “Setup”, then
press the ENTER button.
Setup
Time
Plug & Play
Caption
Language
▼ More
Move
√
√
√
: English
Enter
2
Press the ENTER button to
select “Time”.
Time
Clock
09: 30am
On Timer
06: 00am
Off Timer
- - : - - am
Sleep Timer : Off
On Timer Volume : 10
Move
Adjust
3
Press the ▲ or ▼ button
to select the “On Timer”,
then press the ENTER button.
Press the ▲ or ▼ button
repeatedly to select the
appropriate hours (i.e.,
the hour when the TV
will turn on.)
Press the ▲ or ▼ button
to select the appropriate
minutes.
48
Off
Off
Return
Time
Clock
09: 30am
On Timer
06: 00am
Off Timer
- - : - - am
Sleep Timer : Off
On Timer Volume : 10
Move
Adjust
4
Press the √ button to
select the minutes.
(The minutes digits will
be highlighted.)
Return
Off
Off
Return
Time
Clock
09: 30am
On Timer
06: 30am
Off Timer
- - : - - am
Sleep Timer : Off
On Timer Volume : 10
Move
Adjust
Off
Off
Return
When any of the timers are set, the
“Timer” LED will illuminate (front
panel of TV.)
03668A_Latin_ENG
5/19/05
2:09 PM
Page 49
S P E C I A L F E AT U R E S
To deactivate the “On timer,”
select “Off” during this step.
▼
5
Press the √ button to
select “On” or “Off”.
Time
Clock
09: 30am
On Timer
06: 30am
Off Timer
- - : - - am
Sleep Timer : Off
On Timer Volume : 10
Press the ▲ or ▼ button
to turn the On timer “On”.
(Repeatedly pressing
the ▲ or ▼ button
Move
will alternate between
“On” and “Off”.)
When finished, press the √ button.
Adjust
On
Off
Return
Absent Power Off
When you set the timer “On”, your
television will eventually be turned
off, if you do not operate any
controls during the 3 hours after the
TV is turned on by timer.
This function is available in only the
timer “On” mode and will prevent a
leakage accident or overheating,
caused by your TV left on for a long
time due to the timer “On” (when
you are away on holiday, for
example).
▼
6
To set the Off timer, press
the ▲ or ▼ button to
select “Off Timer”.
Press the √ button and
set the hours and minutes.
(Follow the same procedure as in steps 3~5
above.)
When finished setting
the timer, press the EXIT
button to exit.
Time
Clock
09: 30am
On Timer
06: 30am
Off Timer
- - : - - am
Sleep Timer : Off
On Timer Volume : 10
Move
Adjust
On
Off
Return
Time
Clock
09: 30am
On Timer
06: 30am
Off Timer
12: 00pm
Sleep Timer : Off
On Timer Volume : 10
Move
Adjust
On
On
Return
Setting the Sleep Timer
The sleep timer automatically shuts off the TV after a preset time
(from 30 to 180 minutes).
▼
After about 5 seconds, the sleep
display will disappear from the
screen, and the time interval will be
set.
1
Press the SLEEP button on
the remote control.
2
Press the SLEEP button
repeatedly until the
appropriate time interval
appears (any of the preset values from “Off” to
“180”).
Sleep Timer :
Off
Sleep Timer :
30
49
03668A_Latin_ENG
5/19/05
2:09 PM
Page 50
S P E C I A L F E AT U R E S
Setting the Preferred Volume Level
The preferred volume can be set for when the timer automatically turns on the TV.
1
Press the MENU button to
display the menu.
Press the ▲ or ▼ button
to select the “Setup”, then
press the ENTER button.
Setup
Time
Plug & Play
Caption
Language
▼ More
Move
√
√
√
: English
Enter
2
Press the ENTER button to
select “Time”.
Time
Clock
09: 30am
On Timer
06: 30am
Off Timer
12: 00pm
Sleep Timer : Off
On Timer Volume : 10
Move
Adjust
3
Press the ▲ or ▼ button to
select “On Timer Volume”.
Press the œ or √ button
to adjust volume level.
Press the EXIT button to
exit.
50
Return
On
On
Return
Time
Clock
09: 30am
On Timer
06: 30am
Off Timer
12: 00pm
Sleep Timer : Off
On Timer Volume : 15
Move
Adjust
On
On
Return
03668A_Latin_ENG
5/19/05
2:09 PM
Page 51
S P E C I A L F E AT U R E S
Viewing Closed Captions
Your TV decodes and displays the closed captions that are broadcast with certain TV shows.
These captions are usually subtitles for the hearing impaired or foreign-language translations.
All VCRs record the closed caption signal from television programs, so home-recorded video
tapes also provide closed captions. Most pre-recorded commercial video tapes provide closed
captions as well. Check for the closed caption symbol in your television schedule and on the
tape’s packaging:
.
1
Press the MENU button to
display the menu.
Press the ▲ or ▼ button
to select the “Setup”, then
press the ENTER button.
Setup
Time
Plug & Play
Caption
Language
▼ More
Move
√
√
√
: English
Enter
2
Press the ▲ or ▼ button
to select the “Caption”,
then press the ENTER button.
Return
Setup
Time
Plug & Play
Caption
Language
▼ More
Move
√
√
√
: English
Enter
Return
Misspellings and unusual
characters sometimes occur during
closed caption transmissions, especially
those of live events. There may be a
small delay before captions appear when
you change channels. These are not
malfunctions of the TV.
▼
3
Press the ENTER button,
then press the ▲ or ▼
button to turn closed
captioning “On” or “Off”.
Press the ENTER button.
Caption
Caption
Mode
Channels
Field
Move
:
:
:
:
Off
Off
On
Caption
1
1
Enter
Return
In “Caption” mode, captions appear
at the bottom of the screen, and they usually cover only a small portion of the
picture.
▼
4
Press the ▲ or ▼ button to
select “Mode”, then press
the ENTER button.
Press the ▲ or ▼ button
to select “Caption” or
“Text”, then press the
ENTER button.
Caption
Caption
Mode
Channels
Field
Move
:
:
:
:
Enter
Off
Caption
Caption
1Text
1
Return
Depending on the particular broadcast, it might be necessary to
make changes to “Channels” and “Field”:
Use the ▲, ▼, œ and √ buttons to make the changes. (Follow
the same procedure as in steps 3~4 above.)
Press the EXIT button to exit.
Different channels and fields
display different information: Field 2
carries additional information that
supplements the information in Field 1.
(For example, Channel 1 may have
subtitles in English, while Channel 2 has
subtitles in Spanish.)
▼
5
In “Text” mode, information unrelated to
the program, such as news or weather, is
displayed. Text often covers a large
portion of the screen.
51
03668A_Latin_ENG
5/19/05
2:09 PM
Page 52
S P E C I A L F E AT U R E S
Viewing Picture-in-Picture (Depends on
the model)
You can use the PIP feature to simultaneously to watch two video sources.
Note:When PIP is selected in the Zoom mode, the Mode is automatically converted
into the Normal mode.
Activating Picture-in-Picture
Press the MENU button
to display the menu.
Press the ▲ or ▼ button
to select the “Picture”,
then press the ENTER
button.
Picture
Mode
Custom
Color tone
Size
▼ More
Move
: Custom
: Normal
: Normal
Enter
Picture
▲ More
Digital NR
DNIe Jr
Tilt
PIP
Move
: Off
: On
: 0
Enter
Return
PIP
PIP
Off
: Off
On
Move
Enter
Return
PIP
PIP
Source
Swap
Position
Channel
Move
52
If you turn TV off while watching
and turn it on again, the PIP window
will disappear.
▼
Press the EXIT button to
exit.
√
√
√
3
Press the ENTER button
agian.
Press the ▲ or ▼ button
to select PIP “On”, then
press the ENTER button.
√
√
√
√
Return
2
Press the ▲ or ▼ button
to select “PIP”, then press
the ENTER button.
Quick way to access the PIP:
Just press the PIP button on the
remote control.
▼
1
: On
: TV
√
:
: Air 3
Enter
√
√
√
Return
03668A_Latin_ENG
5/19/05
2:09 PM
Page 53
S P E C I A L F E AT U R E S
Selecting a Signal Source (External A/V) for PIP
1
Press the MENU button
to display the menu.
Press the ▲ or ▼ button
to select the “Picture”,
then press the ENTER
button.
Picture
Mode
Custom
Color tone
Size
▼ More
Move
: Custom
: Normal
: Normal
Enter
2
Press the ▲ or ▼ button
to select “PIP”, then press
the ENTER button.
Return
Picture
▲ More
Digital NR
DNIe Jr
Tilt
PIP
Move
: Off
: On
: 0
√
√
√
Enter
Return
For more information about
external A/V components and signals,
see “Viewing an External Signal
Source” on page 37.
If you select “TV”, the PIP image is
the same as the main image.
(Depends on the model).
▼
3
Press the ▲ or ▼ to
select the “Source”, then
press the ENTER button.
Press the ▲ or ▼ button
to select “TV”, “AV1”,
“AV2” or “S-Video”,
then press the ENTER
button.
√
√
√
√
PIP
PIP
Source
Swap
Position
Channel
Move
: On
: TV
√
:
: Air 3
Enter
√
√
√
Return
PIP
Press the EXIT button to
exit.
PIP
Source
Swap
Position
Channel
Move
: On
TV
: TV
√ AV1
AV2
:
S-Video
: Air 3
Enter
√
√
Return
53
03668A_Latin_ENG
5/19/05
2:09 PM
Page 54
S P E C I A L F E AT U R E S
Swapping the Contents of the PIP image and Main image
Press the MENU button
to display the menu.
Press the ▲ or ▼ button
to select the “Picture”,
then press the ENTER
button.
Picture
Mode
Custom
Color tone
Size
▼ More
Move
: Custom
: Normal
: Normal
Enter
2
Press the ▲ or ▼ button
to select “PIP”, then press
the ENTER button.
: Off
: On
: 0
54
Return
√
√
√
Enter
3
Press the EXIT button
to exit.
√
√
√
√
Picture
▲ More
Digital NR
DNIe Jr
Tilt
PIP
Move
Press the ▲ or ▼ to
select the “Swap”, then
press the ENTER button.
The image in the PIP
window will appear on the
main screen, and vice
versa.
Quick way to access the SWAP:
Just press the SWAP button on the
remote control.
▼
1
Return
PIP
PIP
Source
Swap
Position
Channel
Move
: On
: TV
√
:
: Air 3
Enter
√
√
√
Return
03668A_Latin_ENG
5/19/05
2:09 PM
Page 55
S P E C I A L F E AT U R E S
Changing the Position of the PIP Window
1
Press the MENU button
to display the menu.
Press the ▲ or ▼ button
to select the “Picture”,
then press the ENTER
button.
Picture
Mode
Custom
Color tone
Size
▼ More
Move
: Custom
: Normal
: Normal
Enter
2
Press the ▲ or ▼ button
to select “PIP”, then press
the ENTER button.
Return
Picture
▲ More
Digital NR
DNIe Jr
Tilt
PIP
Move
: Off
: On
: 0
√
√
√
Enter
3
Press the ▲ or ▼ to
select the “Position”, then
press the ENTER button.
Press the ▲ or ▼ button
to select the required
screen positon, then
press the ENTER button.
√
√
√
√
Return
PIP
PIP
Source
Swap
Position
Channel
Move
: On
: TV
√
:
: Air 3
Enter
√
√
√
Return
PIP
Press the EXIT button to
exit.
PIP
Source
Swap
Position
Channel
Move
: On
: TV
√
:
: Air 3
Enter
√
√
Return
55
03668A_Latin_ENG
5/19/05
2:09 PM
Page 56
S P E C I A L F E AT U R E S
Changing the PIP Channel
Press the MENU button
to display the menu.
Press the ▲ or ▼ button
to select the “Picture”,
then press the ENTER
button.
Picture
Mode
Custom
Color tone
Size
▼ More
Move
: Custom
: Normal
: Normal
Enter
2
Press the ▲ or ▼ button
to select “PIP”, then press
the ENTER button.
▲ More
Digital NR
DNIe Jr
Tilt
PIP
: Off
: On
: 0
Press the EXIT button to
exit.
√
√
Enter
Return
PIP
PIP
Source
Swap
Position
Channel
Move
: On
: TV
√
:
: Air 3
Adjust
√
√
√
Return
PIP
PIP
Source
Swap
Position
Channel
Move
56
Return
√
3
Press the œ or √ button
to change the channel
that appears in the PIP
window.
√
√
√
√
Picture
Move
Press the ▲ or ▼ to
select the “Channel”.
Quick way to access the PIP channel:
Just press the CH or CH button on
the remote control.
▼
1
: On
: TV
√
:
: Air 5
Adjust
√
√
√
Return
nel:
on
03668A_Latin_ENG
5/19/05
2:09 PM
Page 57
S P E C I A L F E AT U R E S
Changing the Size of the PIP Window
1
Press the SIZE button
under the cover of the
remote control.
Press the SIZE button
repeatedly to cycle
through this sequence:
large window, small
window.
<Large Window>
<Small Window>
57
03668A_Latin_ENG
5/19/05
2:09 PM
Page 58
S P E C I A L F E AT U R E S
Viewing the Demonstration
To become familiar with the various menus provided by your television, you can view
the in built demonstration.
1
Press the MENU button to
display the menu.
Press the ▲ or ▼ button
to select the “Setup”, then
press the ENTER button.
Setup
Time
Plug & Play
Caption
Language
▼ More
Move
√
√
√
: English
Enter
2
Press the ▲ or ▼ button
to select
“Demonstration”, then
press the ENTER button.
Setup
▲ More
Blue Screen : On
Melody
: On
Demonstration
Move
Enter
3
Each of the menu options
is displayed in turn.
When you wish to stop
the demonstration, press
any button on the remote
control.
58
√
√
√
Return
Input
√
√
Source List : AV1
Edit Name
Move
Press the EXIT button to
exit.
Return
Enter
Exit
03668A_Latin_ENG
5/19/05
2:09 PM
Page 59
S P E C I A L F E AT U R E S
Customizing Your Remote Control
Your TV comes equipped with a universal remote control. In addition to controlling the TV,
the universal remote control can also operate a Set-Top Box, VCR, Cable box and DVD (even
if your VCR, Cable box and DVD are made by manufacturers other than Samsung).
• The remote control might not be compatible with all VCRs, DVD players and Cable boxes.
Setting Up Your Remote Control to Operate Your VCR (Cable box
or DVD player)
1
Turn off your VCR (Cable box or DVD player).
2
Press the MODE button and make sure that the VCR (CABLE or DVD) LED is
illuminated.
œ The remote control has five
modes: TV, STB, VCR, CABLE
and DVD.
3
On your Samsung remote control, press the SET button.
4
Enter 3 digits of the VCR (Cable box or DVD player) code listed on next page
for your brand of VCR (Cable box or DVD player).
5
Press the POWER button on the remote control. Your VCR (Cable box or
DVD player) should turn on. If your VCR (Cable box or DVD player) turns on,
your remote control is now set correctly.
œ Make sure you enter 3 digits
of the code, even if the first digit
is a “0”. (If more than one code
listed, try the first one.)
œ If your VCR (Cable box or
DVD player) does not turn on,
repeat steps 2, 3, and 4, but try
one of the other codes listed for
the brand of your particular VCR
(Cable box or DVD player).
6
Once your remote control is set up, press the MODE button any time you
want to use the remote to operate your VCR (Cable box or DVD player).
• When your remote is in the TV mode, the VCR (or DVD player) control buttons (REW, STOP,
PLAY/PAUSE and FF) will still operate your VCR (or DVD player).
• When your remote control is in the VCR (CABLE or DVD) mode, the volume buttons still control your TV’s volume
59
03668A_Latin_ENG
5/19/05
2:09 PM
Page 60
S P E C I A L F E AT U R E S
Remote Control Codes
VCR Codes
000
001
002
Samsung
018
LG(Goldstar)
005
Daewoo
Daewoo, LG(Goldstar)
008
009
017
061
Candle, Citizen, Portland
Totevision
038
Magnavox, Marantz, Philco,
062
Canon, Curtis Mathes,
Broksonic, Emerson
021
Craig, Fisher, Radio Shack,
039
Philips, Sylvania
General Electric, JC Penny,
JC Penny, JCL, Kenwood,
Magnavox, Panasonic, Philco,
Marantz, NEC, Tatung, Teac
Radio Shack, Realistic, Sylvania
Logik, Multitech, Shintom
063
RCA
Daewoo
Daewoo, Emerson, Samsung,
041
General Electric, Multitech,
064
Shintom
Curtis Mathes, Dimensia,
Scott, Toshiba
Samsung
065
Magnavox, Philco, Sylvania
022
Colortyme, Curtis Mathes, DB,
042
Pioneer
066
Emerson
RCA
LG(Goldstar), Harman Kardon,
043
Emerson
067
Fisher
Bell & Howell, Fisher, JC Penny,
JC Penny, JCL, Kenwood,
044
Hitachi, JC Penny, Pentax, RCA,
069
LG(Goldstar)
JCL, Kenwood, Marantz, NEC,
Marantz, NEC
Sears
070
Marantz, NEC
023
024
Aiwa, Curtis Mathes, Dynatech,
045
Hitachi
071
Emerson
Sanyo, Sears, Tandy
Emerson, Funai, Hitachi, Lloyd,
046
RCA
073
Curtis Mathes, NEC
Hitachi, JC Penny, Pentax,
LXI, MTC, Multitech, Radio Shack,
047
Sony
074
Emerson
Pioneer, RCA, Sears, Toshiba
Realistic, Signature, Sylvania,
048
Sharp
076
Curtis Mathes, Emerson, TMK
Admiral, Optimus, Radio Shack,
Symphonic, Tandy, Teac, Teknika
050
Emerson, Scott
077
Emerson, Scott
Audio Dynamics, DB, JC Penny,
051
Emerson, Samsung
078
RCA, Teac
Candle, Citizen, Craig,
JCL, Kenwood, Marantz, NEC,
052
Fisher, Radio Shack, Realistic,
079
Emerson
Curtis Mathes, General Electric,
Pioneer, Sansui
Sears
082
KLH
Realistic, Sharp
016
JC Penny
RCA
040
Quartz, Radio Shack, Realistic,
015
Pioneer
060
Audio Dynamics, Candle, Citizen,
General Electric, PROSCAN,
014
059
Radio Shack, Realistic, Sharp
037
Realistic, Sanyo, Sears
007
Electrohome, Emerson,
Realistic, Sears, Toshiko, Teknika,
019
006
011
036
LG(Goldstar), Radio Shack,
003
004
Candle, Citizen, Emerson,
025
Go Video, JC Penny, MTC,
026
Akai, Shintom, Sony
053
Portland, Quasar
084
Panasonic
Multitech, RCA, Samsung,
027
Fisher, Sears
054
Candle, Citizen, Daewoo,
085
Daewoo
Totevision
028
Fisher, Radio Shack, Realistic,
Portland, Sharp
086
Panasonic
Candle, Citizen, Curtis Mathes,
088
Admiral
055
Sears, Toshiba
Canon, Curtis Mathes,
Emerson, General Electric,
029
Emerson
Instant Replay, JC Penny,
030
Teknika
JCL, Magnavox, Marantz,
031
Akai, Samsung
056
Emerson
Panasonic, Philco, Philips,
032
Akai, Emerson
057
Fisher, Sears, Toshiba
Quasar, Radio Shack, Realistic,
035
Shintom, Sony
058
Emerson, Scott, Toshiba
LG(Goldstar), JCL, Kenwood,
Marantz, NEC, Pentex Research+
RCA, Sylvania, Technics, Teknika
Cable Box Codes
Eastern International, Hamlin,
038
GI, Jerrold
057
Regal
039
Unika
058
021
Hamlin, Regal
040
Magnavox, Philips, Unika,
059
DeaRyung
022
Zenith
Viewstar
060
DongKuk
023
GI, Jerrold
Magnavox, Philips, Regency,
063
Tocom
005
DaeHan
024
Oak, Osk Sigma
Viewstar
065
Zenith
006
LG(Goldstar)
025
Tocom
042
Hamlin
066
Stargate 2000
007
Saewoo
026
Pioneer
044
GI, Jerrold
067
Sylvania, Texscan
008
RCA
027
Magnavox, Philips, Viewstar
045
Hitachi, Macom
069
Panasonic, Zenith
010
Regency
028
Pioneer
046
Oak
070
Jerrold
011
Hamlin, Panasonic, Regal,
029
Magnavox, Philips, Tocom,
047
Panasonic
071
Viewstar
048
Magnavox, Philips, Viewstar
072
Samsung
049
Magnavox, Philips, Unika,
073
Jerrold
Viewstar
074
RCA
050
Zenith
075
000
Samsung
001
Nawoo
002
TaePyungYang
003
004
020
Samsung
041
012
GI, Hamlin, Jerrold
030
013
GI, Jerrold
031
015
Anvision, Cable Star, Eagle,
032
016
Magnavox, Philips, Randtek,
033
051
Hitachi, Macom
076
Viewstar
034
Magnavox, Philips, Viewstar
052
Pioneer, Samsung, Warner Amex
077
017
NSC
035
RCA, Panasonic, Sprucer
054
General Instrument, Hitachi,
019
Sylvania, Texscan
036
037
GI, Jerrold
Magnavox, Philips, Viewstar
Tocom
Universal
Samsung
GI
Jerrold, Signature, Starcom
056
Hamlin
DVD Codes
60
000
Samsung
003
JVC
006
Panasonic
001
LG(Goldstar)
004
Sony
007
Philips
002
Toshiba
005
Sharp
008
PROSCAN, RCA
009
Curtis Mathes
a
03668A_Latin_ENG
5/19/05
2:09 PM
Page 61
P E C I AM
FMEr
OAT U R E S
C hSa
p tL Ee
Five
TROUBLESHOOTING
If the TV seems to have a problem, first try this list of possible problems and solutions.
If none of these troubleshooting tips apply, then call your nearest service center.
Identifying Problems
Problem
Possible Solution
Poor picture
Try another channel.
Adjust the antenna.
Check all wire connections.
Poor sound quality.
Try another channel.
Adjust the antenna.
No picture or sound.
Try another channel.
Press the TV/VIDEO (Source) button.
Make sure the TV is plugged in.
Check the antenna connections.
No color, wrong colors or tints.
Make sure the program is broadcast in color.
Adjust the picture settings.
If the set is moved or turned in a different
direction, the power should be OFF for at least
30 minutes.
Picture rolls vertically.
Adjust the antenna.
Check all wire connections.
The TV operates erratically
Unplug the TV for 30 seconds, then try
operating it again.
The TV won’t turn on.
Make sure the wall outlet is working.
61
03668A_Latin_ENG
5/19/05
2:09 PM
Page 62
S P E C I AML EFMEOAT U R E S
APPENDIX
Cleaning and Maintaining Your TV
With proper care, your TV unit will give you many years of service. Please follow these
guidelines to get the maximum performance from your TV.
Placement
• Do not place the TV near extremely hot, cold, humid or dusty places.
• Do not place the TV near appliances with electric motors that create magnetic fields,
such as vacuum cleaners.
• Keep the ventilation openings clear; do not place the TV on a soft surface, such as
cloth or paper.
• Place the TV in a vertical position only.
Liquids
• Do not handle liquids near or on the TV. Liquids that spill into it can cause serious
damage.
Cabinet
• Never open the cabinet or touch the parts inside.
• Wipe your TV with a clean, dry cloth. Never use water, cleaning fluids, wax, or
chemicals.
• Do not put heavy objects on top of the cabinet.
Temperature
• If your TV is suddenly moved from a cold to a warm place, unplug the power cord,
and allow at least two hours for moisture that may have formed inside the unit to dry
completely.
Using Your TV in Another Country
If you plan to take your TV with you to a foreign country, please be aware of the different
television systems that are in use around the world. A TV designed for one system may
not work properly with another system due to differences in the TV channel frequencies.
62
03668A_Latin_ENG
5/19/05
2:09 PM
Page 63
APPENDIX
Specifications
Model
Voltage
Frequency of Operation
Dimensions
(mm/inches)
Weight (Kg/ lbs)
CL29A10/CL29M5MQ
CL29M6/CL29M6MQ
CL29K5MQ
CL29M16MQ
CL21T21PQ
CL21S8MQ
CL34A10
CL29T21PQ
AC 100-240 V (México: 127 ±10% V ca)
50/60 Hz
CL25M6MQ
CL25M5MQ
766 X 561 X 581/
30.15 X 22.08 X 22.87
730 X 485 X 575/
28.74 X 19.09 X 22.63
656 X 459 X 511/
806 X 493 X 598/
25.83 X 18.07 X 20.12
31.73 X 19.41 X 23.54
766 X 558 X 586/
30.16 X 21.97 X 23.07
45.7/100.75
44.9/98.98
35/77.16
44/97.00
41/ 90.39
CL21M21MQ
CL21M21PQ
CL29M21PQ
694 X 483 X 506/
27.32 X 19.02 X 19.92
740 X 580 X 590/
605 X 490 X 463/
29.13 X 22.83 X 23.23 23.82 X 19.30 X 18.33
766 X 491 X 583/
910 X 585 X 690/
35.83 X 23.03 X 27.17 30.16 X 19.33 X 22.95
812 X 489 X 627/
31.97 X 19.25 X 24.69
24/52.91
24/52.91
29.5/65.04
40/88.19
68.0/149.92
40/88.19
63