Woodstock SHOP FOX W1811 Specifications

Router Tables
ITEM# 40-300 – $850.00
Cast Iron Router Table (complete as shown)
If you’re after the ultimate table top — the pinnacle of size, stability, and durability — look no further
than the ProMax RT (40-100). Weighing in at nearly 100 pounds, it’s built from one solid piece of 1-1⁄2"
thick cast iron to absorb vibration better than any table on the market. The end result? A long working life of
incredibly smooth operation. Plus, it’s loaded with features: A standard miter slot and Bench Dog’s new
Universal T-track are both machined directly into the table’s surface, making it simple to attach virtually any
accessory. The integral 12-point plate-leveling system serves double-duty by bringing the plate flush with the table
and also locking it firmly in place. Two easy-access fence slots allow for fast, tool-free attachment of the ProFence32
(sold separately). And with no addon parts to risk breaking, this is truly a tool that will last for generations.
ITEM# 40-132 – $139.99
Fence
For strength and accuracy, trust the best!
A top-quality fence is the backbone of any router table system. And with its
feature-loaded design, rugged strength and quality construction,
ProFence is a strong backbone indeed. A heavy-duty
one-piece aluminum frame is fully machined
on the front and bottom surfaces, ensures that
your ProFence is flat, true and square. As for the
design, no other fence packs more features. The exclusive dual EZ-Load T-slots accept our Feather-Loc featherboards, Panel-Loc panel hold-down and Power-Loc safety power switch. The
MDF sub-fences adjust without tools, perfect for zero clearance setup. ProFence also comes with a heavy-duty bit guard and a 2-1/2" diameter dust collection port. For the ultimate setup,
pair the ProMaxRT with a rugged Bench Dog base like the ProMax Cabinet.
Heavy-duty extruded and anodized aluminum; Precision-machined flat, square and true; Easy, tool-free setup with large T-knobs; Heavy-duty bit guard for large or small bits; Universal Ttracks on the front and back; 2-1/2" dust port mounted in back of fence; Fits cast-iron ProMaxRT and ProTop router Phenolic tables; Easy adjust MDF subfences require no tools.
ITEM# 40-101 – $239.99
Table Top
Phenolic top for strength and low friction!
Looking for a premium table-top that won’t bust your budget? Look no further than the ProTop Phenolic Router Table.
With durable 3/4" thick phenolic construction and a feature-rich design, this woodworker’s delight is the best value on
the market. Workpieces glide effortlessly over its smooth, 23-1⁄4" x 31-1/2" surface, while integral accessory tracks handle
everything from featherboards to miter gauges. And with Bench Dog’s innovative 10-point plate-leveling system supporting
the new 1/4" thick ProPlate (sold separately on page 48), you’ll always work on a perfectly flush and flat plane. For the ultimate
router table setup, pair the top with our 32" ProFence (40-132) and choose from two deluxe stand options, the Baltic birch ProCabinet (40-110) or the heavy-duty steel ProStand (40-133).
ITEM# 40-110 – $379.99
Cabinet
Rugged, strong, and full of storage options! Built from baltic Birch with bolt and cross-dowel construction, it offers pullout router
bit trays and has a built-in dust port!
ITEM# 40-001 – $249.99
Portable Router Table
Still the finest portable router table you can buy!
ProTop Contractor is the best job-site router table on the market. Whatever you do, don’t let its compact size
fool you. A unique forward offset router location and dual position fence give it as much usable table surface as
most full-size router tables. Moreover, the 15" inside-cabinet height will accept any router, not to mention Bench
Dog’s ProLift. In fact, ProTop Contractor fits all relevant Bench Dog accessories! The enclosed birch plywood
cabinet reduces dust and noise, and the rubber feet prevent table slippage. There is no routing task ProTop
Contractor can’t perform!
Table width 24"; table depth 16"; height 22" (15" inside cabinet); surface material phenolic laminate 0.050"
(white); router plate phenolic 8-1/4" x 11-3/4", 2" bit hole; leveling 8 leveling screws in steel rails; miter track (1)
3/8" x 3/4” t-bar compatible miter gauge slot - (1) accessory t-slot; fence length 22"; fence height 3-5/8"; accessory t-slots use 1/4” t-bolts or nuts (7/16" wrench size); jointer settings 1/32" or 1/16"; fence subfences MDF, 3/4"
thick; dust port integral 2-1/2", fits shop vac hose (actual size is 2-1/4"); bit guard dual position; weight 40 lbs.;
ship weight 45 lbs.
Order 1-800-445-4669
47
Conestoga Woodworking Supply
Router Tables & Accessories
ITEM# 40-102 – $349.95
ProMax Cast Iron Router Table
ProMAX expands your table saw’s versatility by adding an industrial grade router table in place of the extension wing. ProMAX is perfect for shops
where space is tight and when increased table depth is a must. An added benefit is the additional miter slot to the left of your saw blade —
perfect for crosscut sled use. The exclusive miter gauge accessory track adjusts to fit your miter gauge, and it also gives you a 1/4" T-slot
for mounting accessories like our Feather-Loc featherboards. If additional workspace is required, we’ve got you covered. Our
NEW dual fence slot configuration allows you to rotate the fence and work from the other side of the table with a larger
surface at your disposal — great for large workpieces.
Table size 16" x 27"; 2-1/2" Dust Port
Precision-machined aluminum plate with pre-drilled
mounting holes to accept the routers in the chart below.
ProPlate™
Locate your router and the ProPlate you need.
Routers
Standard 1
Standard 2
Makita
1100
Dewalt
DW 621 / 621k
Milwaukee
5615-5624
Craftsman
Standard
Dewalt
616 / 618
Freud
FT1700E
Rigid
2930 Combo Kit
Freud
1702 VCEK
Bosch
1617 / 1618
Porter-Cable 690 / 890 /
7529 / 97529 / 8529
Hitachi M12VC
(Fixed and Kit)
Standard Blank
All plates are
8-1/4" x 11-3/4"
overall. Standard
Blank plates have
a (3-1/4") insert
opening. Blank
plates do not have
pre-tapped mounting holes and can
be custom-drilled
to accept any
router not in this
chart. If your
router is not in this
chart, choose a
blank plate with
an appropriately
sized insert
opening.
Large 2
Porter-Cable 7518 /
7519 / 7538 / 7539
Bosch
1619 / 1619 EVS
Milwaukee
5625-20
Freud
FT2000
Triton
TRA001
Dewalt
625
40-120
40-121
40-122
40-123
40-124
Insert Opening
3-1/4"
3-1/4"
3-1/4"
3-11/16"
3-11/16"
Price
$60.00
$60.00
$60.00
$60.00
$60.00
ITEM# 40-150 – $329.95
Router Lift
●8-1/4" x 11-3/4"
●Sized to fit all Bench Dog router tables.
(Not for plunger routers)
●Fits 4.2" dia. motor housings
●Smaller motors require adapter (see chart)
Router
Bit changes don’t get
faster, safer or easier
than this! ProLift is the
ONLY lift that allows the motor to pass the
surface of your router top!
ITEM# 40-131 – $29.95
DualTrack
For adding accessory tracks to shop-made router tables, it doesn’t get more convenient
than Dual-Track. Like T-Lock (above), it contains a versatile Universal T-track for attaching accessories like our Feather-Loc featherboard and more! Plus, it has a standard
miter slot for miter gauges.
● Universal T-Track accepts 5/16" T-bolts, 1/4" T-bolts, and 1/4" hex bolts.
● Combines miter track and a T-Track for any application.
● 3/4" x 3/8" miter track for standard or "T" miter bars.
● Mounting hardware not included.
● 1/2" H x 1-13⁄16" W x 36" L
Order 1-800-445-4669
1-1/2", 2-1/2" and
blank inserts are
availble
ROUTER Compatibility
Fixed Base ONLY
ProLift™ Router Adjustment System
No other router lift has this kind of range, speed and accuracy!
Speaking of accuracy, how’s 0.001" adjustment resolution with
no need for a fussy and expensive digital readout? ProLift
is the only lift on the market designed for demanding, daily
use — no other lift matches our features. In fact, ProLift is
the only direct-drive lift built around the robust Porter-Cable
model 7518 router. Integral fins keep your router running cool.
The direct-drive mechanism eliminates the complication and
slop associated with belts, chains and gears. Don’t settle for
wimpy lifts that clog up with dust, bind, get sloppy and move at
a snail’s pace. Isn’t it time you changed the way you change
your bits? Plate Size: 8-1/4" x 11-3/4"
Insert with 1-1/2"
opening for most
router applications
Fulcrum Pin
ITEM #
HeavyDuty 1/4"
thick plate
prevents
sagging
Includes all necessary
mounting hardware
Large 1
48
Adapter
Price
Porter-Cable
7518, 7519
No Adapter
Required
$24.95
Bosch
1617, 1648
40-002
$24.95
Bosch
690, 890
40-002
$24.95
Makita
RF1100/1101
40-003
$24.95
DeWalt 610,
616/6181
40-002
$24.95
ProLift Adapter
40-002
4.2" to 3.5"
$24.95
ProLift Adapter
40-003
4.2" to 3.2175"
$24.95
Conestoga Woodworking Supply
Job Site Tools
ITEM# 10-019 – $15.95
Get perfect cross-cuts
with your circular saw!
ProCut™ Portable Saw Guide
Pro-Cut is the ultimate portable saw guide. It’s inexpensive, easy-to-handle, and produces
perfect 90° crosscuts. Pro-Cut also helps to reduce dangerous kickback. Built-in guides
quickly square Pro-Cut to the workpiece, and two rubber strips prevent side-to-side movement. The best part is how quickly it aligns your saw to the cut line. Here’s how it works: the
first time you use Pro-Cut, your saw will trim away a small portion from the tool. This fits ProCut to your circular saw. The next time you align Pro-Cut to your cut line or mark, your saw
will automatically align too! You will be amazed at how much cleaner your crosscuts look.
Fast, safe, accurate and clean!
● Turns your circular saw into a precision cutting tool — perfect 90° crosscuts, every time.
● Instantly aligns your saw to the cut line!
● Dramatically reduces dangerous kickback, binding and bent blades.
● Cuts lumber, siding, I-beams, trim, stair treads and more!
● Reduces tear-out and splintering.
● Prevents your saw from scratching the work.
● Use for marking, measuring and layout.
Table Saw Accessories
ITEM# 10-025 – $17.95
PushLoc™
Offset Push Stick
Get your hands
out of harms way!
Exclusive
offset handle
keeps your
hand out of
harm's way.
A push stick isn’t much good if you can’t find it! That’s why we designed our revolutionary Push-Loc with a dedicated docking station that
keeps Push-Loc upright and ready for use. No more fumbling with the push stick in the middle of a cut — just reach out and grab it! The
docking station is also a handy pencil tray, and it even houses up to two tape measures. Another goal was to make our push stick
safer, less likely to hinder visibility, and less likely to
get caught on the blade guard. Furthermore, it had
to work on router tables and jointers. Push-Loc’s
patented offset handle accomplishes all these goals.
Holster your
It gets your hands out of harm’s way, improves linetape measure
of-sight visibility, and allows your hand to easily clear
the blade guard. On router tables, the offset works by
here and never
preventing your hand from scraping the table top.
lose sight of it
again.
● Ergonomic “no-slip” grip for comfort and safety.
● Special handle geometry keeps Push-Loc
parallel to the fence throughout the entire cut.
● Rear tail hook holds tight, but is still compatible
with thinner material.
Stop busting your knuckles on the blade guard!
Docking station
● Rubber sole helps prevent slippage and won’t
Push-Loc’s offset handle clears the guard, and lets
includes a handy
mark your workpiece.
you see what you are doing. A must-have accessory
pencil tray.
for every table saw!
ITEM# 10-005 – $19.95
ITEM# 10-001 – $15.95
Single FeatherLoc®
Multi-Purpose Featherboard
BladeLoc 10" Saw Blade Changing Tool
Blade-Loc is a revolutionary blade-changing tool that provides safer
changes for you and your table saw blades. Most people don’t realize that
using a piece of scrap wood can bend the blade, enough to leave scratch
marks and tear-out in delicate panels. Blade-Loc evenly grips the blade
around its perimeter and will not bend it! Moreover, Blade-Loc protects
your hands. There is simply no better way to change your blades. Made
from a specially formulated polymer, Blade-Loc is guaranteed to last a
lifetime.
● Protect your hands from serious injury. ● No more chipped or bent blades.
● Fits all 10" table saws.
● Replaces the scrap wood and
double-wrench methods of blade changing.
THREE SIMPLE STEPS!
Setup is fast and easy!
(1) Place Blade-Loc over your blade
and loosen the nut (2) Remove your
old blade from the table saw. (3) Place
Blade-Loc over your blade and tighten.
Order 1-800-445-4669
Ergonomic
"no-slip"
grip.
Tail hook grips
your stock.
Safer cuts.
Better cuts.
Feather-Loc is like having an extra hand to stabilize your
stock and keep it against your rip fence. This prevents chatter,
gouging and dangerous kickback. You’ll get safer, cleaner
cuts and less waste. Feather-Loc’s durable polymer feather
tips will not mar your workpiece. Large clamping knobs are
easy on the hands and the exclusive miter slot adapter holds tight
in any position.
Feather-Loc's built in setup feather makes
setting the proper tension fast, easy and
repeatable. You can remove Feather-Loc
from the saw without altering the tension
setting. Includes miter slot adapter.
●Holds stock against the rip fence for better safety and accuracy.
●Produces smooth, chatter-free cuts with less gouging.
Feather-Loc is perfect for holding long boards ● Reduces kickback, binding and bent against the rip fence, greatly improving the
blades.
quality of any cut. Miter slot adapter fits in all ● Can be flipped to work on either side of the fence.
standard miter gauge slots, found on table
saws, band saws, shapers and router tables. ● Fits standard miter gauge slots (3/4" wide by 3/8" deep) found in most table saws, band saws, router tables and shapers.
49
Conestoga Woodworking Supply
Chisel Sets
ITEM# D2227 – $56.00
12-Piece Carving Chisel Set
This complete Carving Chisel Set features beech
wood handles with steel ferrules. Set includes: 6mm
Straight, 12mm Straight, l0mm V-Tool, 6mm Right
Skew, 6mm Double Skew, 8mm Gouge, l0mm Gouge,
14mm Gouge, 6mm Spoon, 6mm Beading, 6mm
Round Nose, 6mm V-Groove and a leather roll-up
pouch. Each chisel measures 7-1/2" overall.
ITEM# D2304 – $109.00
For serious wood turners, this
Deluxe Lathe Chisel Set features
Steelex® Plus 6-Piece
beefy ash handles for unsurDeluxe Lathe Chisel Set
passed control, brass ferrules and
high speed steel blades. Includes:
a 17" long 13/16" Parting Tool, 13/16"
Round Nose and 3/8" Gouge; a 19" long
1" Skew, a 5/8" Gouge and a 2-3/4"
long 3/8" Gouge.
ITEM# D2250 – $35.10
Steelex® 5-Piece Turning Chisel Set
For fine detail turning, this 5-Piece
Turning Chisel Set features well balanced hardwood handles and high
carbon steel cutting edges. Includes:
1/16" Radius Gouge, 1/8" Radius Gouge,
3/16" Parting Tool, 1/4" Spear Point and 1/4" Skew. 0"–1/2" Overall.
Mallets
SHOP FOX® Mallets
These Round Head Mallets feature a
tough urethane 360° striking surface that is
non-marring and very quiet to use. Urethane also
provides plenty of mass for tough carving operations.
The finely sanded maple handles are
Weight
turned to yield a comfortable grip for Size 12 oz.
all day use. Choose from a full se- D2805
18 oz.
lection of SHOP FOX® non-marring D2806
D2807
24 oz.
mallets in a variety of weights for
D2808
30 oz. every carving application.
Setting Planer Knives
MINI PLANER PAL®
ITEM# W1226 – $29.95
For setting knives on
10"-13" Planers with
1-7/8"–2-1/8" Cutterheads.
We have taken our patented magnetic technology
and developed a knife
setting jig for all portable
planers with standard
1-7/8" – 2-1/8" cutterheads. With millions
of these planers on the market, the MINI
PLANER PAL® is a very popular tool. The
MINI PLANER PAL® allows you to set knives
perfectly every time to within +- .001 " .
Sold in pairs only.
Magnetic Knife Setting Jigs
Magnetic Jointer Knife Setting Jigs
Our patented JOINTER PAL® Knife-Setting System lets you set jointer knives in perfect
alignment every time! It also allows you to shift nicked knives to get a perfect cut to an accuracy of +- .001". We offer knife-setting jigs and extensions for almost all jointers.
Item# W1210 – $29.95
Polycarbonate Bodied Jig
for 4"- 8" Jointers with HSS knives
Item# W1228 – $110.00 Item# W1227 – $104.00
Carbide Jig for 12"- 18" Jointers Carbide Jig for 8"- 14" Jointers with
Carbide or HSS knives
with Carbide or HSS knives
Magnetic Planer Knife Setting Jigs
Rotacator®
ITEM# W1214 (single) – $61.95
ITEM# W1216 (pair) – $127.95
ITEM# W1218 – $79.95
Adjust woodworking machinery to within +– .001"! The magnetic base
keeps the Rotacator® firmly in position while the indicator
indexes at 0°, 90°, 180°, 270° for unmatched versatility.
This is an extremely precise and useful tool!
PLANER PAL®
Our patented knife-setting system lets you
set planer knives in perfect alignment every
time! It also allows you to shift nicked knives
on 2-1/2" – 4" cutterheads to get a perfect
cut with an accuracy of +- .002". Two jigs are
needed for 15"- 20" planers; three for planers
over 20". For 12" and smaller planers with
1-7/8"– 2-1/8" cutterheads, use our MINI PLANER PAL® (WI226).
Order 1-800-445-4669
Price
$19.95
$20.95
$23.95
$25.95
Our Rotacator® makes machine adjustments
easy and precise. Designed to accurately
set planer feed and bed rollers to
eliminate end snipe, it is also ideal
for making precision table saw adjustments for the smoothest cutting possible.
50
Conestoga Woodworking Supply
Lathe Chucks
Chuck Inserts
Wood Lathe Chuck Inserts
ITEM# D1090 - $105.00
Steelex® top quality lathe inserts make Steelex® 3
and 4-Jaw Chucks and 8" Face Plate adaptable to a
wide range of wood lathes. We also carry unthreaded
inserts for owners of Shopsmith® type lathes.
Steelex® 3-Jaw Chuck for Wood Lathes
Our 3-Jaw Chuck is ideal for turning round
stock. Unique self-centering jaws also
reverse for greater versatility when turning
oversized material. Chuck is 6" in diameter
and includes key. 5/16" - 6"
3-Jaw
ITEM# D1089 - $72.50
Steelex® 4-Jaw Chuck for Wood Lathes
The Steelex® 4-Jaw Chuck features,
independently adjustable jaws for
4-Jaw
square or oddly shaped stock.
Stepped jaws can also be reversed for
added versatility. Chuck is 6" in diameter and includes key. 3/8"– 5-1/4"
INSERTS - SPECIFICATIONS
Item#
D1092
D1093
D1094
D1095
D1096
D1097
D1098
D1099
D1100
D1101
D1102
Size
5/8" unthreaded
3/4" unthreaded
3/4" x 10TPI / RH
3/4" x 16TPI / RH
7/8" x 14TPI / RH
7/8" x 16TPI / RH
1" 8TPI / RH
1" 10TPI / RH
1" 12TPI / RH
1-1/8" 12TPI / RH
1-1/4" 8TPI / RH
Item#
Price
$7.60
$7.60
$7.60
$7.60
$7.60
$7.60
$7.60
$7.60
$7.60
$7.60
$7.60
D1103
D1104
D1105
D1106
D1107
D1108
D1109
D1110
D1111
D1112
D1113
Size
1-1/2" 8TPI / RH
3/4" x 10TPI / LH
3/4" x 16TPI / LH
7/8" x 14TPI / LH
7/8" x 16TPI / LH
1" x 8TPI / LH
1" 10TPI / LH
1" 12TPI / LH
1-1/8" 12TPI / LH
1-1/4" 8TPI / LH
1-1/2" 8TPI / LH
Price
$7.60
$7.60
$7.60
$7.60
$7.60
$7.60
$7.60
$7.60
$7.60
$7.60
$7.60
ITEM# D1088 - $28.00
Steelex® 8" Face Plate for Wood Lathes
Our 8" diameter cast iron Face Plate features the exclusive
modular insert design, which allows it to mount to a wide
variety of lathe models. Ideal for plate and bowl turning.
Adjustable Mobile Bases
Heavy-Duty Mobile Bases are designed to give users a stable and mobile platform upon which to mount machinery and equipment having a variety of base sizes and weights. The heavyduty casters are arranged on outriggers allowing the machine to sit as low as possible and yet be extremely stable. Swivel casters on two corners provide excellent maneuverability. The
base can be assembled in many configurations providing maximum flexibility of use. The unique two-piece retractable feet use rare earth magnets to allow the knob to turn while the foot pad is tight to the floor.
Mini Mobile Base
Item# D2260A – $59.95
● Min. Dimensions 10-1/2" x 14-1/2"
● Max. Dimensions 17" x 21-1/2"
● 600 lb. capacity
Super Heavy-Duty Mobile Base
Item# D2058A – $82.95
Heavy-Duty Mobile Base
Item# D2057A – $62.95
● Min. Dimensions 19" x 20-1/2"
● Max. Dimensions 29-1/2" x 29-1/2"
● 700 lb. capacity
● Min. Dimensions 18" x 24-1/2"
● Max. Dimensions 28-1/2" x 33-1/2"
● 1300 lb. capacity
Mobile Base Extension Kits
SHOP FOX® Extension Bars
For 02058. Super Heavy-Duty Mobile Base
ITEM# D2246a – $34.00
These 36" extension bars replace the standard length side rails on the D2058 Super HeavyDuty Mobile Base. This allows the base to be assembled with a minimum capacity of 18" x 34" to
a maximum capacity of 3-1/2" x 44". Suitable for heavier and longer machines such as lathes or for
mobilizing heavy workbenches.
Mobile Base sold separately
SHOP FOX® Extension Kit
For DD2260 and DD2057 Mobile Bases
ITEM# D2259A – $70.00
Mobile Base sold
separately
Order 1-800-445-4669
This kit easily bolts on to Models D2260 and D2057 to provide support for an
extension table or similar device. Allows the whole machine and extension to move as
one unit. Adjustable for length (up to 44") as well as front to back. Very versatile!
51
Conestoga Woodworking Supply
Roller Stand
Roller Tables
ITEM# D2274 – $108.00
SHOP FOX® Roller Stand
ITEM# D2054 – $21.00
For greater work stability and support, this 5 Roller Stand features large diameter, ball bearing rollers mounted on a sturdy
adjustable pedestal base.
The improved 4-point Roller Stand provides stability
for every wood processing job. Welded square steel
construction, variable height adjustment and flat storage make this the roller stand of choice.
SHOP FOX® Roller Table
5 Roller Table
● Adjusts in height from 26-1/2" to 44"
● All-steel construction
● 15-7/8" wide ball bearing rollers
● 250 lb. capacity
SHOP FOX® Roller Stand
ITEM# D2271 – $179.95 9 Roller Stand
●
●
●
●
● Adjusts in height from 24-1/2" to 42"
● Unit folds flat for storage
● All-steel construction
● 13" wide ball bearing roller
● Non-marring foot pads
● 150 lb. capacity
Adjusts in height from 26-1/2" to 44".
All-steel construction
15-7/8" wide ball bearing rollers
250 lb. capacity
Use this versatile roller table wherever you need extra workpiece
support. Features all-steel welded construction and measures 19" x
65" long. Comes with 9 ball bearing rollers and has four independently
adjustable legs for any leveling requirement. Adjustable in height from
6-3/8" to 4-1/8", 78 Ibs., 1,000 lb. capacity!
Drill Presses
ITEM# W1680 - $420.00
17" Floor Model Drill Press
This solid performing drill press is perfect for the average
size cabinet shop or small machine shop. With the extra
horsepower aluminum finned motor, the Morse
Taper #3 spindle for the larger direct mount bits and the
closely spaced spindle shaft bearings
you have one of the most accurate drill presses in its class.
Solid cast iron construction,
precision ground table; sealed ball
bearings, and rubber coated quickadjust handles provide the quality
and convenience you want in a machine
investment. We even added a built-in light
so you can see what you're doing.
Drill Presses
ITEM# DP300L – $215.00
12" Crosshair Laser Drill Press
1/3 HP, 120 Volt, 60 hz, 1720 RPM induction motor; Fully adjustable laser pod; Drill press utility
tray; Flexible lamp provides extra light to the work surface; Tilting work surface; Adjustable,
locking depth stop; Rack and pinion table raising/lowering mechanism; 1/2" (13 mm) capacity
chuck and key; Belt and pulleys; Column and base stand.
Drill Presses
The Radial Drill Press is one of the most versatile and handy drill presses you can add to your shop. Between the tilt of the.
head and the, tilt of the table, you can drill any angle necessary. You can also use It as a horizontal boring machine. Add to this
an Incredible swing which allows you to bore to the center of a workpiece that is 34" wide and you have one of the best values
available in a drill press.
ITEM# W1669 - $235.00
Bench-Top
Radial Drill Press
SPECIFICATIONS:
● Motor size: 1 HP, 1,720 RPM
● Voltage: 110V /220V
● Switch: Toggle Type
● Overall height: 65-1/2"
● Spindle travel: 3-1/4"
● Number of speeds: 12
● Drill chuck: 5/8"
● Spindle taper: MT#3
● Range of speeds: 140-3,050 RPM
● Swing: 17"
● Drilling capacity: 1" steel
● Table: Precision ground cast iron
●Table size: 14" dia.
● Approx. shipping weight: 200 Ibs.
Drill Press Vises
ITEM# D-2731 - $54.95
4" Cross Sliding Vise
Order 1-800-445-4669
ITEM# W1670
$300.00
SPECIFICATIONS:
● Motor: 1/2HP, 110V
● Overall height:
Bench model: 31-1/2"
Floor model: 64-1/2"
● Spindle travel: 3-1/4"
● Number of speeds: 5
● Drill chuck: 5/8"
● Head tilts: 45° left / 90° right
● Range of speeds: 550, 880
1,520, 2,490, 3,470
●Swing: 34" maximum
●Table: Precision ground cast iron
●Table Swing: 360°
Floor
Radial Drill Press
●Table size:
Bench model: 9-3/4"
Floor Model: 12-1/4"
● Table Tilts: 90° in both directions
● Approx. shipping weight:
Bench model: 100 lbs.
Floor model: 150 lbs.
Mortising Attachment for Drill Presses Price
55mm & 65mm
$26.00
ITEM# D-2933 - $36.95
Angle Vise
52
ITEM# D-2727 (3" Vise) - $13.95
Conestoga Woodworking Supply
Planers
Spiral cutterheads reduce tear-out and produce a finish
that is second to none. Our spiral cutterheads produce
an incredible finish as well as reduce the sound level of
the running machine! The German-made indexable solid carbide inserts are extra heavy-duty
and have four cutting surfaces that can be rotated to expose a new cutting edge when dull or
chipped. The result is a consistently smooth finish with very little down time.
Spiral Cutterheads
Planer and Jointer Models are available with and without spiral cutterheads
ITEM# W1742 – $1,115.00 ITEM # D3635 - Replacement 15" Planer Knives (3)
15" Planner w/ Mobile Base
Equipped with pedestal mounted thermal overload safety switch, cast iron extension wings, an impressive
15" x 8" capacity and a built-in mobile base, you’ll find everything you ever wanted in a 15" planer including
an affordable price.
3 HP, 220v, single-phase motor; Precision ground cast iron table & extension wing; Table measures 15" x 42" w/wings; 15"x8" capacity;
2 speed gear box: 16FPM & 30 FPM; Carbide insert spiral cutterhead; Internal thermal overload safety switch.
3 HP, 220V, single-phase motor; Maximum cutting width: 15"; Maximum cutting height: 8"; Minimum stock thickness: 3/16"; Minimum
stock length: 8"; Maximum cutting depth: 1/8"; Feed rate: 16 FPM & 30 FPM; Cutterhead diameter: 3"; Knives: 3 (HSS); Cutterhead
speed: 5,000 RPM; Power feed rollers: solid serrated steel; Table size: 15" x 20"; Approximate shipping weight: 675 lbs.
ITEM# W1742S – $1,795.00
15" Planner w/ Spiral Cutterhead (Specifications same as W1742 with Spiral Cutterhead)
ITEM# W1754S – $2,560.00
20" Planner w/ Spiral Cutterhead
(Specifications same as W1754 with Spiral Cutterhead)
ITEM# W1754 – $1,855.00 ITEM # D3691 - Replacement Planer Knives (Set of 4)
20" Planner w/ Mobile Base
With its built-in locking mobile base and pedestalmounted switch, our Model W1754
planer is easy to move and operate. Just press down on the lock lever with your foot and this planer is mobile.
Standard features: A 55-5/8" long precision-ground cast iron table with the cast iron extension wings, two feed
speeds, return rollers, a 20" x 8" capacity, adjustable bed rollers, magnetic switch with thermal overload protection, and a 5 HP motor.
5 HP, 220V, single-phase motor; Maximum cutting width: 20"; Maximum cutting height: 8"; Minimum stock thickness: 1/8";. Minimum stock
length: 7-1/2"; Maximum cutting depth: 1/8"; Feed rate: 16 FPM & 20 FPM; Cutterhead diameter: 3-1/8"; Number of knives: 4; Cutterhead
speed: 5000 RPM; Feed rollers: solid serrated steel; Table size: 20" x 25-3/8" (20" x 55-5/8" with extension); Overall dimensions: 55-5/8" L x
36-5/8" W x 43-5/8" H; Approximate shipping weight: 935 lbs.
Jointers
ITEM# W1745 – $529.00
ITEM # D3637 - Replacement HHS Knives (4)
6" Jointer
w / Mobile Base
The oversized fence on this 6"
Jointer provides tremendous
control for edge jointing wider
boards. The fine adjust handwheel dials in the outfeed table
relative to the cutterhead top
dead center and the lever
adjusted infeed table provides
quick and accurate infeed table
movement. Top it all off with a builtin mobile base, and you've got a
jointer that has it all!
1 HP, 110V, single-phase motor; Maximum
stock width: 6"; Maximum depth of cut: 1/8";
Maximum rabbeting capacity: 1/2"; Cutterhead diameter: 2-1/2"; Knives: 3 (HSS) 6"
x 5/8" X 1/8"; Cutterhead speed: 4,800 RPM; Table size: 6" x 46"; Table height from floor:
32-1/2"; Cuts per minute: 14,400; Fence size: 5"H x 35"L; Fence adjustment: positive
stops @ +- 45° & 90°; Overall dimensions: 46" L x 27-1/2" W x 37-1/4" H; Approximate
shipping weight: 270 lbs.
Order 1-800-445-4669
ITEM# W1755 – $569.00
Just like its 8" sister machine, the Model W1741,
ITEM # D3690 - Replacement HHS Knives (4) this 6" jointer is sure to be
a top seller! Built like a tank
6" Jointer w/Parallelogram
and loaded with red-hot features
Adjustable Beds
like parallelogram adjustable
beds, a 4-knife cutterhead and
a built-in mobile base. The 110V,
1-1/2 HP motor makes this
a real workhorse with a
small footprint.
Motor: 1-1/2 HP, 110V, single-phase; Amps:
13; Precision ground cast iron table size: 6" x
55-1/2"; Floor to table height: 32-1/2"; Maximum
depth of cut: 3/8";Rabbeting capacity: 1/2"; Cutterhead diameter: 3"; Cutterhead: 4-knife, 6" x
3/4" x 1/8"; Cutterhead speed: 4,850 RPM; Cuts
per minute: 19,400; Power transfer: V-belt drive;
Switch: standard push-button type switch with
large off paddle for safety;
Fence system: positive stops
@ +45°
- & 90°; Approximate
shipping weight: 347 Ibs.
Cutterhead
ITEM# W1755S – $1,050.00
6" Jointer w/ Spiral
(Specifications same as W1755 with Spiral Cutterhead)
53
Conestoga Woodworking Supply
Jointers
ITEM# W1741 – $900.00
ITEM # D3634 - Replacement HHS Knives (4)
ITEM # W1211 - Jointer Pal®
8" Jointer
w/ Parallelogram Adjustable Beds
If you set out to design a full featured 8" Jointer, you couldn't do any
better than this. We started with a 3 HP motor and a 4 knife cutterhead
and added a precision parallelogram table adjustment mechanism, extra long infeed table,
large cast iron center mounted fence, pedestal mounted switch and a built-in locking mobile
base. Check out the other features and you'll agree!
3 HP, 220V, single-phase motor, TEFC, 3,450 RPM; Switch: magnetic w/thermal overload protection; Table size:
8" X 76-5/16"; Tables: parallelogram design, precision ground cast iron; lnfeed table size: 8" x 43-3/8"; Deluxe
cast iron fence size: 35" L x 1-1/4" W x 5" H; Cutterhead diameter: 3-3/16"; Cutterhead knives: 4 (HSS)
8" x 3/4" x 1/8"; Cuts per minute: 21,400; Cutterhead speed: 5,350 RPM; Max. depth of cut: 1/8"; Max.
rabbeting depth: 5/8"; Max. width of cut: 8"; Approximate shipping weight: 600 lbs.
ITEM# W1741S – $1,360.00
8" Jointer w/ Spiral Cutterhead (Specifications same as W1741 with Spiral Cutterhead)
ITEM# W1744 – $2,169.00
ITEM # D3634 - Replacement HHS Knives (4)
ITEM # W1211 - Jointer Pal®
12" Heavy-Duty Jointer w/ Parallelogram Adjustable Beds
With its big cast iron fence, 83" long table and 12" cutting width, this large capacity Jointer makes
edge jointing and flattening wide stock a breeze. Its parallelogram table adjustment mechanism
guarantees tables stay perfectly aligned to each other throughout their vertical range and a half ton
of cast iron mass dampens any motor vibration for perfect results every time.
3 HP, 220V, single-phase motor, 18A, 3,450 RPM; Switch: magnetic w /thermal overload protection; Table size:
13" x 83"; Tables: parallelogram design, precision ground cast iron; Deluxe cast iron fence size: 47" x 5-3/8";
Cutterhead diameter: 3-3/4"; Cutterhead knives: 4 (HSS) 12" x 1/8" x 1-9/64"; Cuts per minute: 19,800; Cutterhead
speed: 4,950 RPM; Max. depth of cut: 1/8"; Max. rabbeting depth: 3/4"; Max. width of cut: 12"; Approximate shipping weight: 1,036 lbs.
Bandsaws
12" Heavy-Duty Jointer w/ Spiral Cutterhead
(Specifications same as W1744 with Spiral Cutterhead)
ITEM# W1707 – $1,069.00
ITEM# ST1000 – $340.00
17" Bandsaw
STEELEX 14" Bandsaw
The bandsaw is the most versatile wood cutting machine you can own and this 14"
Bandsaw will handle anything that comes its way. Features include a
powerful 1 HP motor, cast iron body, left and right tilting cast iron table,
computer balanced wheels and stable A-frame stand.
1 HP, 1l0V/220V, single-phase motor, 9/4.5A, TEFC, 1725 RPM;
Blade size: 93-1/2" (1/8" - 3/4"); Precision ground cast iron table
size: 14" L x 14" W x 1-1/2" H; Floor-to-table height: 43-7/8";
Throat capacity left of blade: 13-1/2"; Maximum cutting height:
6-1/4"; . Table tilt: left 15º, right 45º; Blade speed: 3,000 FPM;
Shielded and lubricated bearings; Wheels: computer balanced
aluminum; Approximate shipping weight: 165 lbs.
ITEM# W1706 – $540.00
ITEM # D3348 - 6" Extension Block Kit
(Use 105" blade)
14" Bandsaw
We took the most popular bandsaw size and
added many features usually found only on
larger and more expensive machines.
Order 1-800-445-4669
ITEM# W1744S – $2,795.00
1 HP, 110V/220V, single-phase motor, TEFC, 1,725
RPM; Blade size: 93-1/2" (1/8" to 3/4" wide); Precision
ground cast iron table; Table size: 14" x 14" X l-1/2";
Cutting capacity (throat): 13-1/2"; Max. cutting height:
6"; Table tilt: 45º right, 10º left; Blade speeds: 1,500 &
3,200 FPM; Cast iron frame & wheels; Deluxe extruded
aluminum fence; Ball bearing blade guides; Cabinet
type stand (full storage); Quick change blade release/
tensioning; Approximate shipping weight: 256 lbs.
54
With its 2 HP motor, 12" of cutting height and a 161/4" throat capacity, this bandsaw is built to handle
large cutting chores.
2 HP, single-phase motor, 60 Hz, 220V, TEFC; Blade size: 132"
(1/8" - 1"); Precision ground cast iron table; Table size: 23-1/4" x
17-1/2" x 1-1/2" thick; Cutting
capacity (throat): 16-1/4"; Max.
cutting height: 12"; Table tilt 15°
left, 45° right; Blade speeds:
1,600 & 3,300 FPM; Cast iron
drive wheels; Quick change
blade release/tensioning;
Deluxe extruded aluminum
rip fence; Ball bearing
blade guides; Sealed &
permanently lubricated ball
bearings; Approximate shipping weight: 409 lbs.
Ball Bearing Blade Guides
Conestoga Woodworking Supply
Bandsaws
ITEM# W1729 – $1,260.00
ITEM # D3574 - Resaw Fence Attachment
Similar to our 17" bandsaw but with a larger cutting capacity and
heavy-duty construction. This bandsaw is built for serious production!
2 HP, 110V / 220V, single-phase motor, TEFC capacitor start induction, 60 Hz, prewired 220V; Amps: 20/10; RPM: 1,725;
Precision ground cast iron table; Table size: 26-3/4" x 19" x 1-1/2" thick; Table tilt: l0ºL, 45ºR; Floor to table height: 37-1/2";
Overall height: 76"; Overall width: 36"; Overall depth (including fence): 32"; Cutting capacity / throat: 18-1/4"; Maximum cutting
height: 12"; Blade length: 143" long; Blade sizes range: 1/8" - 1"; 2 Blade speeds: 1,700, 3,500 FPM; Wheels: fully balanced cast iron with
polyurethane tires; Wheel covers: pre-formed, hinged steel; Blade guides: roller disc with full enclosure protection and ball bearing design;
Bearings: sealed and permanently lubricated; Approximate shipping weight: 473 lbs.
19" Heavy-Duty Bandsaw
Routing Machines
ITEM# W1736 – $560.00
Benchtop Pin Router
This Benchtop Pin Router is made for routing identical
pieces using shop-made patterns. As the pattern follows
the raised pin in the table, the pneumatic head lowers the
router and router bit. Requires a router motor, router
bits, shop made templates and air compressor.
Four router collars are included to fit most major
brands of routers.
Maximum head stroke: 5-1/2"; Maximum distance spindle to table:
6-1/2"; Maximum distance housing to table: 8-3/4"; Throat capacity:
18"; Router collar sizes: 4-1/4", 3-21/64", 3/4" and 3-1/2" x 2-5/8"
high; Router housing diameter: 4-1/2"; Air pressure required: 60
PSI; Table pins: 3/16" x 1/4", 5/16" x 3/8", 7/16" x 1/2"; Table size:
19-3/4" W x 14" D x 1-3/8" H; Overall size: 31-1/8" H x 28-1/4" D x
21-3/4" W; Approximate shipping weight: 60 lbs.
ITEM# W1728 – $589.00
Sliding Router Table
This router table offers a distinct safety advantage because the sliding table allows you
to keep your fingers away from the router bit while cutting (especially important when
profiling end grain or irregular wood grain).
Simply clamp the workpiece against the miter
fence and feed the cut by pushing the table.
Table can also be locked in place for use as
a normal router table when the sliding feature
is not needed.
Main table surface: cast iron 30-3/4" x 9-7/8"; Sliding table
surface: extruded aluminum 30-3/4" x 12-1/4"; Table opening
diameters: 4"(w/ 2-1/2" & 1-1/8" dia. insert rings); Table height:
34"; Fence size (two): 12" x 3" extruded aluminum; Approx.
shipping weight: 137 lbs.
Shapers
ITEM# W1674 – $799.00
ITEM # D3124 - Extension Table (23" x 40")
ITEM # D3080 - Router Bit Spindle (Fits 1/4" & 1/2" Bits)
2 HP Shaper
We designed this Shaper for maximum performance at an affordable
cost, with 25% more power and 40%
more weight than other shapers in its
price range.
2 HP, 110 / 220V, single-phase motor; Large precision ground cast iron table; Table size: 24" x 21";
Spindles: 1/2" and 3/4" (Included); Spindle travel:
3"; Spindle speeds: 7,000 & 10,000 RPM; Spindle
openings: 1-1/4", 3-1/2" & 5"; Powder coated paint;
Power cord size: 10' x 14 gauge; Heavy-duty
miter gauge; All ball bearing construction;
Reversing switch; Approx. shipping weight:
293 lbs.
Order 1-800-445-4669
ITEM# W1763 – $1,000.00
2-1/2 HP Shaper
Our affordable heavy-duty shaper with all of
the features of its bigger brothers and more:
Built-in mobile base, precise spindle
elevation gauge, ratcheting fence locks
with independent left and right micro-adjustment,
precision ground cast iron table, fully adjustable
cutter guard, easy-to-change 2-speed belt drive,
and convenient pedestal controls.
2-1/2 HP, 220V, 9.5A, single-phase motor; Large precision
ground cast iron table; Table size: 28" x 30"; Spindles: 1/2" &
3/4"(Included); Router bit collets: 1/4" & 1/2" (Included); Spindle
travel: 3"; Spindle speeds: 7,000 & 10,000 RPM; Spindle
openings: 3", 3-1/2" & 6-3/4"; Magnetic switch w / thermal overload
protector; Shielded & lubricated ball bearings; Powder coated paint; . Built-in 4"
dust port; Approximate shipping weight: 390 lbs.
55
Conestoga Woodworking Supply
Shapers
ITEM# W1702 – $1,060.00
ITEM # D3451 - 4" Long Spindle
ITEM # D3392 - Router Bit Spindle (Fits 1/4" & 1/2" Bits)
3 HP Shaper
This full capacity 3 HP Shaper will handle the smallest profile cutters all the way up to
the largest panel cutters with its three spindle sizes, 3" spindle travel and 5-1/2" maximum spindle opening. Two reversible speeds also provide the greatest flexibility for arranging
cutters of all sizes. So, no matter what the shaping application is, whether it's simple edge profiling
or making door stiles, rails and panels, this is the right machine for the job.
3 HP, 220V, single-phase motor; Large precision ground cast iron table; Table size: 30-1/2" x 28-1/4"; Spindles:
1/2", 3/4" and 1" (Included); Spindle travel: 3"; Spindle speeds: 7,000 & 10,000 RPM; Spindle openings: 1-3/8",
2-3/4", 4" & 5-1/2"; Magnetic switch w / thermal overload protector; Shielded & lubricated ball bearings; Built-in 3"
dust port; Approximate shipping weight: 353 lbs.
ITEM# W1807 – $3,995.00
7-1/2 HP Shaper
This heavy-duty 7-1/2 HP tilting arbor shaper has got it all: A -5° to 45° spindle tilt with exact dial
indicator, precision ground cast iron table with vertical and horizontal hold-downs, split
micro-adjustable fence, a huge sealed dust removal chamber below the table with a
separate dust hood and port above the cutter, quick and easy 4-speed change system, and a large 10" cutter capacity. Extras include a 3-piece table insert, heavy-duty
miter gauge, and 7 spindle spacers.
7-1/2 HP, 220V / 440V*, three-phase, 3,450 RPM, 20/10 Amps; Spindle travel: 6-5/8"; Spindle tilt: -5 to + 45°; Spindle
size: 1-1/4"; Spindle capacity: 6"; Spindle length: 7"; Spindle openings: 2-3/4", 3-7/8", 6", 9-7/8" & 13-3/4"; Spindle
speeds: 3900, 5000, 7200 & 9400 RPM; Maximum cutter diameter: 10"; Table counterbore: 13-3/4"; Precision ground
cast iron table size: 47-1/4" x 35-1/2" x 3"; Floor to table height: 34-1/4"; Fence: cast iron, independently adjustable;
Switch: magnetic with thermal overload protection; Dust Ports: (2) 5" ports; Approximate
Power Feeders shipping weight: 1,276 lbs.
ITEM# W1765 – $600.00
1/4 HP Power Feeder
ITEM # D3868 - Quick Holder
ITEM # D3869 - Slow Speed Kit
ITEM # D3871 - Extra Roller
1/4 H.P., 110V, 1.8 AMP; Number of speeds:
4; Range of speeds 20, 26, 33, 43 FPM;
Wheels: 3, synthetic rubber, 1-1/8" W x
3-1/16" Dia.; Rotation: forward & reverse; X Y
Z adjustment; Maximum height of rollers: 5";
Vertical movement: 6-3/4"; Horizontal movement: 9-3/4"; Approx. shipping weight: 80 lbs.
ITEM# W1766 – $796.00
1/2 HP Power Feeder
ITEM # D3872 - Extra Roller
ITEM# W1767 – $980.00
1 HP Power Feeder
ITEM # D3886 - Extra Gear
ITEM # D3872 - Extra Roller
1/2 H.P., 220V, 4 AMP; Number of speeds: 4;
Range of speeds: 9.5, 15, 25, 38 FPM; Wheels: 3,
synthetic rubber, 2" W x 4" Dia.; Rotation: forward & reverse; X Y Z adjustment; Maximum
height of rollers: 7"; Vertical movement: 9";
Horizontal movement: 16"; Approx. shipping
weight: 115 lbs.
1 HP Power Feeders w/ 4 Rollers
ITEM# W1768 (single-phase) – $996.00
ITEM# W1769 (3-phase) – $996.00
1/2 H.P., 220V, 4 AMP; Number of speeds: 4; Range
of speeds: 9.5, 15, 25, 38 FPM; Wheels: 3,
synthetic rubber, 2" W x 4" Dia.; Rotation:
forward & reverse; X Y Z adjustment;
Maximum height of rollers: 7"; Vertical
movement: 9"; Horizontal movement: 16";
Approx. shipping weight: 115 lbs.
1 HP, 220V, single-phase or 3-phase motor; Number of speeds: 4; Feed speeds: 13, 26, 36 and
72 FPM; . Number of rollers: 4; Roller size:
2-3/8" W x 4-3/4" D; Roller suspension: 3/4";
Vertical movement: 9'-1/2"; Horizontal movement: 24-1/4"; Approx. shipping wt: 49 lbs.
Power Feeder Roller Flanges & Tires
ITEM# D3720 (Flange with Rubber Roller) – $26.95
ITEM# D3721 (Flange with Polyurethane Roller) – $33.95
ITEM# D3722 (Replacement Rubber Roller) – $14.00
Order 1-800-445-4669
56
Conestoga Woodworking Supply
Table Saws
10" Table Saw with Riving Kife and Extension Table
From the heavy cast iron trunnions , 3 HP Leeson® motors and triple belt drive to the massive cast iron table and wings, these table saws are built to
last a lifetime. You'll also appreciate the camlock t-fence, riving knife, heavy cast handwheels, magnetic switch, T-slot miter gauge with fence extension
and flip stop and 4" dust collection port. A true riving knife follows the up and down and tilt movement of the blade. The W1820 features an extra 50" rip
capacity -– more than enough to rip the center of a standard sheet of plywood, long extension table with adjustable legs, square steel tubing frame and
dimensionally stable top. The W1819 features a smaller extension table and 29-1/2" rip capacity.
ITEM# W1819 (10" Table Saw) – $1,260.00
ITEM# W1820 (10" Table Saw w/Ext. Table) – $1,450.00
ITEM # D2058A - (Heavy-Duty Mobile Base) – $82.95
ITEM # D2059A - (Mobile Base Extension Kit [Model W1820] – $70.00
ITEM# Shop Fox 2 HP Contractor Table Saw – Call for Pricing
10" 2 HP Contractor Style Table saw with Riving Knife
3 HP Motor, Riving Knive. Aluma-Classic Fence; Left Tilt; 30" Rip to Right of Blade.
ITEM# W1811 – $3,575.00
10" Sliding Saw with Scoring Blade & Riving Knife
●5 HP, 220V, single phase TEFC motor
●Table size with extension wings: 40" W x 47" L
●Sliding table size: 12-1/4' W x 63" L
●Scoring blade dia.: 3-1/8"
●Scoring blade arbor speed: 8,000 RPM
●Blade size: ( 1/4" – 1-3/8" W)
●Main blade arbor speed: 4,000 RPM
●Single lever locking fence
Bandsaw
Planer/Moulders
ITEM# W1770 – $2,530.00
ITEM# W1812 – $1,395.00
21" Bandsaw
Planer/Moulder
5 HP Bandsaw with Foot Brake,
●5 HP, 220V, single phase TEFC motor
●Precision ground cast iron table and infeed
& outfeed extension wings
●Cutterhead Speed: 7,000 RPM
●2 HSS cutterhead knives
●Number of cuts per minute: 14,000
●Pedestal mounted control switch
with variable speed control
●Dovetailed way with precision
gib adjustments
●5 HP, 220V, single phase TEFC motor
●Precision ground cast iron table
●Table size: 20-3/4' W x 291/2" L
●Max. cuttmg height: 14"
●Cutting capacity/throat: 20"
●Blade size: ( 1/4" – 1-3/8" W)
●Blade Speed: 4,600 RPM
●Deluxe cast iron fence with extruded aluminum resaw fence attachment
Cyclone Dust Collector
ITEM# W1816 – $1,095.00
3 HP Mini Low Profile Cyclone Dust Collector
Specifications:
●Motor: 3 HP, 220V,
single-phase, Class "F" TEFC
●Maximum CFM: 1654
●Static; pressure at 1654 CFM: 2.2"
●Intake port: 8" diameter
●Collection drum capacity: 55 gallon
●Filter surface area: 180.84 sq. ft.
●Filter efficiency: 0.2-2.0 micron
●Impeller: Radial fin
●Impeller diameter: 14-1/2"
●Overall size: 67" L x 44" W x 80" H
Order 1-800-445-4669
Features:
●Switch: Magnetic with thermal overload protection and remote control
●Steel collection drum with casters for easy dust disposal
●Dual pleated filters
●Cleaning flaps maximize filter efficiency
●Two year warranty
Designed to go toe to toe against every dust collector in its class, this Low Profile Cyclone Dust Collector
goes one step further - it actually fits under a seven foot ceiling! So, if the others don't fit, they're not collecting dust. Compare all the other specs and features and you'll agree, this dust collector stands heads
above the rest.
57
Conestoga Woodworking Supply
Sliding Table
ITEM# 50-SLT60P - Please call for pricing.
Excalibur Sliding Table
This sliding table fits on most table
saws, if you do a lot of plywood sheet
cutting a sliding table can be very
useful in making it safer and easier
when cutting large sheets.
Main mounting bracket can
be repositioned front to
back on the saw as needed
to obtain up to 72" cutting
capacity*.
*(Depending on the positioning of the mounting
bracket on the saw)
Please call with your table saw brand
and model number and we’ll check if the
Excalibur sliding table fits on your saw.
Now with 4 support legs and
redesigned re-enforced leg sockets
featuring positive height adjustment
with multi-position mounting holes and
adjustable Ieveling foot on each leg.
Miter angle adjustment
rail with positive stop pin.
Quickly locates pre-set commonly used angles: 15°,22.5°,
30°,45° & 90°.
Onboard storage mounts for cross cut
fence. Safely stow the fence out of the
way when not in use.
Fence
Super Stop and Rail System
Shop Fox® Classic Fence
Model W-2005 (standard rails) – $269.95
Model W-2006 (long rails) – $350.00
Aluminum Rail 2-1/2" high; Versatile flip stock can be flipped
up when not in use; Multiple stops can be used for your most
common lengths; Heavy-duty design; Straight, smooth, strong
aluminum construction; One handle stop adjustment; 1/16"
saw dust groove in face of rail; Adjustable indicators.
A classic in design and function, this new fence is the
perfect after-market upgrade for table saw owners
that expect high precision and ease of installation.
Plus, you can choose between the Classic Fence with
standard rails or with long rails to suit your cutting
needs.
Item#Price
Super Stop
$45.00
Super Stop w/ext
$70.00
4' Rail
$49.00
6' Rail
$75.00
8' Rail
$98.00
12' Rail
$145.00
Fence
Model W-1716 – $199.95 (Aluma-Classic Fence w/standard Rails)
Model W-1720 – $279.95 (Aluma-Classic Fence w/long rails and legs - 50" cutting capacity)
• Wide T-shape design for maximum accuracy and support
• Single locking cam action lever
• HDPE plastic fence surface for extremely low sliding resistance
• Fine-lined cursor can be mounted on either side of the fence
• Simple mounting procedure for most brands of table saws
• Fence body has powder-coated paint for durability
• Standard rails (W-2005) provide 25" maximum rip to the right of the blade
• Long rails (W-2006) provide 54" maximum rip to the right of the blade
• Fits most table saws
Beefy extruded aluminum and steel construction and T-square design make this Aluma-Classic Fence durable and
precise. Widely spaced adjustment points allow very precise set-up and cam-Iever front locking mechanism and
torsion box design allow this fence to fit on just about any table saw without the need for a rear locking mechanism.
Includes either standard or long rails, a self-adhesive measuring tape and adjustable magnified cursor for
quick positioning. Choose the Aluma-Classic Fence with long rails for wide panel cutting up to 50".
•Wide T-square for maximum accuracy and support
•Easy single locking cam action lever
•Adjustable fence wear pads
•Magnified cursor lens
•Steel and aluminum fence body for durability, strength and reduced weight
•Standard 57" rails provide 30" maximum rip to the right of the blade
•Long 79" rails provide 50" maximum rip to the right of the blade
•Fits most table saws easily
Order 1-800-445-4669
58
Conestoga Woodworking Supply
Table Saw Accessories
Clamping Mitre Gauge
ITEM# W1323A – $39.95
Tenoning Jig
ITEM# D-3246
$79.95
Our clamping miter gauge is safer than standard miter gauges
because it keeps your hands where they belong - away from the
blade. It has a comfortable O-handle grip, built-in sliding stop, and
positive trigger clamping action. It fits standard miter
gauge slots, 3/8" x 3/4" with positive angle stops
at 90° and 45° both left and right side. Bar extends
to 12".
Heavy cast iron construction
and precision adjustment
points combine to produce
perfect tenons for mortise
and tenon joinery. This
Tenoning Jig also adjusts for
angled tenon cutting set-ups.
Standard 3/8" x 3/4" miter
bar fits all miter gauge slots
including T-slots.
Heavy-duty Miter Gauge
ITEM# D3123 – $49.95
PushLoc™
ITEM# 10-025 – $17.95
This cast iron, 7 pound Miter Gauge with 5" tall
chromed handle and 2-3/8" x 8" miter face, is
the largest and strongest Miter Gauge on
the market. The easy-to-read scale allows
cutting up to 60° left and right and the 3/8"
x 3/4" miter bar with patented adjustment
capability removes any side play for the
ultimate in accuracy. Fits table saws with
both T-slots and standard slots:
Push Stick
ITEM# D3122 – $8.95
●
●
●
●
SUPER
ERGONOMIC
DESIGN!
This
essential safety item
keeps hands safe distance from the blades and cutters
while still maintaining control of the workpiece against machine
fences. A true necessity when running narrow stock. Durable handle
is designed for maximum control. Measures 3-1/2" overall.
Board Buddy (Table Saws & Router Tables)
ITEM# W1104 – $42.95
The wheels on these Board Buddies® turn clockwise to prevent kickback on table
saws and router tables. Mounts to fences 3" - 3-1/2" high x 1" or wider.
Board Buddy (Shapers)
ITEM# W1105 – $42.95
These Board Buddies® are made from die-cast aluminum and feature non-marring
neoprene rubber wheels. Because the wheels turn in both directions, they function
as hold-downs rather than anti-kickback devices. Mounts to fences 3" - 3-1/2" high x
1" or wider.
Ergonomic “no-slip” grip for comfort and safety.
Special handle geometry keeps Push-Loc
parallel to the fence throughout the entire cut.
Rear tail hook holds tight, but is still compatible with thinner material.
Rubber sole helps prevent slippage and won’t mark your workpiece.
BRETT
GAURD®
Sawguards
Exclusive
offset handle
keeps your
hand out of
harm's way.
Holster your
tape measure
here and never
lose sight of it
again.
Tail hook grips
your stock.
The clear shield is firmly
Docking station
suspended over your work in a
includes a handy
cantilever mount. With the Brett
pencil tray.
Guard properly adjusted over the
work piece, it becomes extremely
difficult to get fingers under the guard
and into the "Danger Zone" around the
blade. The Brett Guard is an adjustable "fixed barrier" guard that will not
ride up, or climb over the work piece
or, more importantly your fingers,
providing excellent protection from the
blade. This design also enables the
Brett Guard to function as a reliable work holding device,
holding the work in place against the table surface and/
or rip fence - something that gravity acting guards
are unable to do.
Clear inverted box-type guard
provides excellent visibility
and is available with optional
dust port.
Guard pivots
for easy
blade access
or machine
maintenance.
Each guard contains an adjustable
anti-kick mechanism in the
shield that can be retracted for
working with soft materials and
veneers. Also included with
each guard is a riving knife.
10" Saws
10A-M30/40 33"-43" crear to right of blade
10A-M50
53" clear to right of blade
12" Saws
12A-M30/40 33"-43" clear to right of blade
12A-M50
53" clear to right of blade Options:
Dust port in sheild add
10A-M
Guard only (custom applications)
20249
Custom mounting tube bracket
20318
50" Ceiling mount drop tube
Order 1-800-445-4669
Ergonomic
"no-slip"
grip.
59
$499.99
$499.99
$549.99
$549.99
$39.99
$343.99
$47.99
$49.99
Cantilever
systems are
designed to
give you full,
unobstructed
cutting capacities to the right
and left of the
saw blade.
Conestoga Woodworking Supply
Dadoes
Saw Blades
Freud Saw Blades
SD-208 - 8" – $115.00
Dado Blade Set
We have many more Freud saw blades in stock. Please ask for a free Freud saw blade
catalog. Not sure which one you need? Give us a call, we can help you. Freud saw
blades are the best blades made - Period.
RIPPING
Item#
Dia
Teeth
Arbor Kerf
LM72M010
10"
24 flat
5/8"
.126
LM72M012
12"
30 flat
5/8"
.16
20° Positive Hook Angle
Plate Price
.087 $67.95
.087 $87.95
LM74R010
10" 30 TCG
5/8"
.126
12° Positive Hook Angle
.087
LM71M010
10"
18 flat
5/8"
.153
12° Positive Hook Angle
.118
$76.95
$67.95
THIN KERF RIPPING
Item#
Dia
Teeth
Arbor Kerf
Plate Price
LU87R008
S"
22 ATB
5/8"
.087
.063 $41.95
LU87R009
9"
22 ATB
5/8"
.094
.071 $44.95
LU87R010
10"
24 ATB
5/8"
.094
.071 $47.95
20° Positive Hook Angle
Item#
Dia
Teeth
Arbor Kerf
Plate Price
TK204
8"
24 ATB
5/8"
.094
.063 $28.95
TK206
10"
24 ATB
5/8"
.098
.071 $36.95
15° Positive Hook Angle
COMBINATION
Item#
Dia
Teeth
Arbor Kerf
Plate Price
LU84M009
9" 40 Comb 5/8"
.126
.087 $70.95
LU84M011
10" 50 Comb 5/8"
.126
.087 $70.95
LU84M012
12" 60 Comb
1"
.126
.087 $107.95
10° Positive Hook Angle
Item#
Dia
Teeth
Arbor Kerf
Plate Price
TK904
8"
36 ATB
5/8"
.094
.063 $32.95
TK906
10"
50 ATB
5/8"
.098
.071 $48.95
15° Positive Hook Angle
Item#
Dia
Teeth
Arbor Kerf
Plate Price
TK304
8"
40 ATB
5/8"
.094
.063 $35.95
TK306
10"
40 ATB
5/8"
.098
.071 $43.95
15° Positive Hook Angle
CROSSCUTTING
Item#
Dia
Teeth
Arbor Kerf
Plate LU85R009
9"
72ATB
5/8"
.116
.098
LU85R010
10"
80 ATB
5/8"
.116
.098
LU85R012
12"
96 ATB
1"
.116
.098
10° Positive Hook Angle
Item#
Dia
Teeth
Arbor Kerf
Plate LU73M010
10"
60ATB
5/8"
.126
.087
LU73M012
12"
72 ATB
1"
.126
.087
10° Positive Hook Angle
Price
$94.95
$100.95
$156.95
Price
$76.95
$107.95
Item#
Dia
Teeth
Arbor Kerf
Plate Price
LU98R010
10" 80 TCG
5/8"
.126
.087 $116.95
LU98R012
12" 96 TCG
1"
.126
.087 $138.33
5° Positive Hook Angle
Item#
Dia
Teeth
Arbor Kerf
Plate Price
TK604
8-1/2" 60 ATB
5/8"
.087
.063 $56.26
Order 1-800-445-4669
60
Freud's quality and craftsmanship in a stack dado but
at a wobble dado price! The
negative hook angle makes
flat bottom grooves and
virtually splinter-free cuts. It
has two outside blades with
5-2 wing chippers. This makes it
ideal for underpowered saws because it requires less power to
feed. All blades and chippers come with Freud's anti-kickback
design. Perfect for the weekend woodworker who wants the
economy of a wobble dado with the quality of a stacked Freud
dado set. Shims included.
SD-308 - 8" – $179.95
(22 Teeth 5/8" Arbor)
Freud's Safety Dado series provides
the highest quality results while
maintaining a level of safety never
found in a dado before. This stacked
dado with its razor-sharp outside
blades will produce grooves or rabbets which are flat bottomed and
virtually splinter-free in solid woods.
SD-306 - 6" – $182.00
SD-508 - 8" – $253.95
(Super Dado with Anti-Kickback
Design)
Super cuts in veneered plywood,
melamine, chipboard, and solid
woods. Produces a super smooth
bottom due to its 4-wing chippers.
Also included is a set of precision
steel shims for fine adjustments.
Packaged in a sturdy carrying
case. 29/32" maximum width cut.
SD-608 - 6" – $304.95
(8" Dial-A-Width)
Freud's dial-a-width dado features
a dial hub for shim free adjustability.
Its laser cut blade plates provide extreme accuracy and micro grain carbide is specifically for glue line rips to
ensure superior cuts and maximum
life. The SG60S also features trimetal brazing for impact-resistant
tips, and precision-ground arbors
to ensure precise blade alignment.
Premier Fusion Saw Blade
Premier Fusion Saw Blade – $99.95
Freud engineers have discovered
the ultimate combination of fused
tooth grind geometry. The Fusion
tooth design fuses Freud's 30 deg.
Hi-ATB tooth with unique double side
grind tooth geometry. This design
provides a glass smooth finish while
also giving a flawless top & bottom
finish in plywood hardwoods & melamine.
10" dia. 5/8" arbor 40 tooth. Coated with Freud's Perm aSHIELD #P410
Conestoga Woodworking Supply
Sanders
ITEM# W1717 – $199.95
Horizontal / Vertical Belt Sander
1/3 HP, 110V, 3,450 RPM; Belt size: 4" x 36"; Belt speed: 2,100 FPM; Precision cast aluminum tables (2); Quick
change belt system; Ball bearing construction; Miter gauge included; Powder coated paint; Tilting platen; Approximate
shipping weight: 59 lbs.
ITEM# W1708 - $155.00
12" Disc Sander
ITEM # D2056 - Tool Table
1 HP, 110Vv, 1,725 RPM; Disc: 12" cast aluminum; Table tilt: 0-45°;
Precision ground cast iron table . Table size: 17-1/2" W x 8-1/4" D; Ball
bearing construction; Powder coated paint; Safety key operated switch;
2" OD dust port; Footprint: 13 " W x 10" D; Overall height: 13-1/2";
Approx. shipping weight: 74 lbs.
ITEM# W1676 – $450.00
6" X 10" Combination Sander
1 HP, 110V / 220V: single-phase, 3,450 RPM; Precision ground cast Iron table; Belt size: 6" x 48"; 10" Computer balanced
cast iron disc; Quick change belt release; Belt speed: 2,300 FPM; Disc speed: 2,420 RPM;
Cabinet style stand w / powder coated paint; Heavy-duty miter gauge; Dust ports: 2-1/2" for
disc and 2" for belt; Ball bearing construction; Approximate shipping weight: 170 lbs.
ITEM# W1688 – $769.00
6" x 80" Edge Sander
You'll appreciate the balance this Edge Sander
strikes between industrial-like quality and a compact size that won't hog precious shop space.
Solid features like the graphite coated cast iron platen and the
precision ground cast iron tables will make this edge sander a
lifetime investment.
1-1/2 HP, single-phase, 110V / 220V motor; Precision ground
cast iron table; Table size: 22" x l0-1/2"; Table height: 36-3/4"41-3/4"; Table travel: 5"; Belt size: 6" x 80"; Belt speed: 1,800
FPM; Platen: 6-3/4" x 29-3/4", graphite coated; Shielded &
lubricated ball bearings; Quick belt release; Spring loaded table
height assist; Powder coated paint; Dust port: 4"; Belt tracking
and tension adjustment; Approximate shipping weight: 260 lbs.
ITEM# W1730 – $1,689.00
6" x 89" Oscillating Sander
You'll appreciate the balance this Edge Sander strikes between
industrial-like quality and a compact size that won't hog
precious shop space. Solid features like the graphite
coated cast iron platen and the precision ground
cast iron tables will make this edge sander a lifetime
investment.
2 HP, 220V, single-phase, 1,725 RPM motor; Precision ground cast iron
tables; Table size: 26-7/8" x 12"; Table travel: 3-3/4" Vertical, 5" Horizontal;
Aux. table size: 10" x 11-1/2", travel: 10"; Sanding belt size: 6" x 89"; Sanding belt speed:
3,150 FPM; Sanding belt oscillation stroke: 3/4"; Drive drum diameter: 7"; Idler roller diameter: 3-7/8"; Platen with
graphite pad: 6-3/4" x 30-1/4"; Platen tilt: 0° - 90° (5° scale); 3 spindle drums: 1-1/2", 2", 3" X 4-1/2" high; footprint:
22-1/2" W x 19-1/2" D; Approximate shipping weight: 462 lbs.
ITEM# W1686 – $875.00
Oscillating Spindle Sander
1 HP, 110V / 220V, TEFC motor; Precision ground cast iron table; Ten spindle sizes: 1/4" x 5" , 3/8" x 6", 1/2" x 6", 5/8" x 6", 3/4" x 9", 1" x 9",
1-1/2" x 9", 2" x 9", 3" x 9", 4" x 9", tapered & threaded; Table tilt: 45° front & 20° back; Spindle speed: 1,725 RPM; Oscillation speed: 72SPM;
Stroke length: 1-1/2"; Powder coated paint; Dust port: 4" opening; Steel table inserts; Footprint: 16" x 16"; 100 grit sanding sleeve for each
spindle; Approximate shipping weight: 333 lbs.
Order 1-800-445-4669
61
Conestoga Woodworking Supply
Sanders
ITEM# W1712 – $575.00
6" x 12" Heavy-Duty Combination Sander
1-1/2 HP, 110V, 12A, single-phase, 1,725 RPM motor; Tables: Precision ground cast iron (2); Sanding belt size: 6" x 48"; Disc: 12" (Disc is
computer balanced cast aluminum); Belt release: Quick change; Sanding belt speed: 878 FPM; Disc speed: 1,725 RPM; Switch: ON/OFF
toggle with safety key; Stand: Cabinet style; Heavy-duty miter gauge; Powder coated paint; Dust ports: 2" and 2-1/2"; Ball bearing construction; Approximate shipping weight: 178 Ibs.
ITEM# W1678 – $2,025.00
26" Dual Drum Sander
Whether quickly surface sanding large quantities of panel
assemblies, or achieving
"tear-out" free finishes on figured wood, the Model W1678
efficiently performs a function no
other machine can fulfill! At a full
26" wide, this Dual Drum Sander can
be fitted with two different grits allowing
both rough and finish sanding in one
pass. Push aside your old hand sanders and make room for this one!
5 HP, 220V, 25 Amp, single-phase, 3,450 RPM
motor; Capacity: 4-1/4" thick by 26" wide; Feed
rates: Variable (0-20 FPM); Conveyor motor: 1/3
HP, 60VDC, 2 Amp; Conveyor table size: 26-1/8" x
30-1/4"; Dual drum w / hook & loop sandpaper attachment; Powder coated paint & all ball bearing
construction; Minimum board length: 9"; Minimum board thickness: 1/8"; Surface speed of drums:
2,300 FPM; Sanding drums: Two 6" x 27-3/4", aluminum; Dual 4" dust ports; Micro-adjustable rear drum;
Approximate shipping weight: 435 lbs.
ITEM# W1772 (10 HP Single Phase) – $3,745.00
ITEM# W1773 (15 HP 3-Phase) – $3,745.00
37" Dual Drum Sander
Designed for production shops, these 37" sanders have what it takes to
get those big jobs done fast. Sand panels and boards up to 4" thick and
36-1/2" wide with the dual 6" sanding drums. Feed speed is adjustable
from 6 to 18 FPM. The variable speed knob and amp meter make it easy to
monitor workpiece load. Other great features: a hinged hood, an emergency
stop bar, pedestal-mounted
controls, four 4" dust ports,
and either a 10 HP, 220V
single-phase or 15 HP, 220V /
440V 3-phase motor.
Sanding drum motor: (WI772) 10 HP, 220V, singlephase or (WI773) 15 HP, 220V / 440V', 3-phase, TEFC, 1725 RPM;
Conveyor motor: 1/4 HP; Maximum board width: 36'-1/2"; Maximum board thickness: 4"; Minimum board length: 9"; Minimum
board thickness: 1/16"; Surface speed of drums: 2800 FPM; Conveyor feed rate: Variable, 6 - 18 FPM; Sanding drums: 2, steel /
rubber; Drum diameter: 6"; Dust ports: 4, 4"; Sandpaper width: 6"; Overall size: 49" H x 68" W x 50-1/2" D; Approximate shipping
weight: 1260 lbs.
ITEM# W1689 – $4,375.00
15" Open End Wide-Belt Sander
ITEM # D3003 - 15" x 20" Belt Cleaning Pad
This Wide-Belt Sander with open end will sand flat panels up to 30" wide in half the footprint of comparable wide-belt sanders. Features include pneumatic belt tracking, tensioning & oscillation, amp/load
meter and sliding support bar.
Sanding motor: 5 HP, 220V, 32 Amp, single-phase; Sanding motor speed: 1,725 RPM; Feed motor: 1/4 HP; Belt speed:
2,050 FPM; Feed rates: 13 and 16 FPM; Maximum sanding width: 15" x 2; Maximum sanding thickness: 5-1/2"; Minimum
stock length: 12"; Minimum stock thickness: 1/8"; Belt size: 16" x 48"; Required air pressure: 75 PSI @ 2 CFM for belt tracking; Dust port: 5"; Footprint: 29" wide x 27-1/4" deep; Height with dust port: 62"; Approximate shipping weight: 914 lbs.
Order 1-800-445-4669
62
Conestoga Woodworking Supply
Sanders
ITEM# W1751 – $6,029.00
25" Wide-Belt Sander
ITEM # D3003 - 15" x 20" Belt Cleaning Pad
A platen between two rollers provides uniform sanding pressure
across the length and width of every board for the ultimate sanded finish every time. Front mounted controls and a digital load meter make this wide-belt sander easy to operate with full capacities that handle
everything but the widest glue-ups
Sanding motor: 7-1/2 HP, 220V, single-phase; Sanding motor speed: 1,725 RPM; Feed motor: 1/4 HP; Belt speed: 2,050 FPM; Feed
rates: 13 and 16 FPM; Maximum sanding width: 25"; Maximum sanding thickness: 5-3/4"; Minimum stock length: 12"; Minimum
stock thickness: 1/8"; Belt size: 26" x 48"; Required air pressure: 75 PSI; Dust port: 2-5"; Footprint: 37-1/4" wide 24-1/2" deep;
Height with dust port: 65-5/8"; Approximate shipping weight: 1,060 lbs.
ITEM# W1737 (10 HP Single Phase) – $10,655.00
ITEM# W1738 (15 HP 3-Phase) – $10,740.00
37" Wide-Belt Sanders
ITEM # D3003 - 15" x 20" Belt Cleaning Pad
Door builders and cabinet shops will love the extra capacity of
these 37" wide-belt sanders. Available
with 15 HP, 3-phase or 10 HP, singlephase sanding motors, these widebelts are built for daily industrial use with
features like a heavy-duty steel cabinet,
pneumatic belt oscillation, and a built-in air
filter/regulator. The digital control pad automates table adjustments and is accurate to
0.005". Also, the variable speed conveyor, adjustable oscillation controls, and adjustable graphite/felt platen easily allow the operator to "tweak" the sander for soft, smooth
finishes on all types of wood.
Sanding motor: 15 HP, 220/440V, 3-phase, 36, 18 Amp, 1,725 RPM, 60 Hz cycle, triple V-belt drive, or 10 HP,
220V, single-phase, 50 Amp, 1,725 RPM, 60 Hz cycle, triple V-belt drive; Conveyor motor: 1 HP, 220/440V,
3-phase, 3.4, 1.7 Amp, 60 Hz cycle, variable speed belt/gearbox, or 1 HP, 220V, single-phase, 7 Amp, 60
Hz cycle, variable speed belt/gearbox; Table elevation motor: 1/4 HP, 220/440V, 3-phase, 1.2, 0.6 Amp,
1,725 RPM, 60 Hz cycle, V-belt power transfer, or 1/3 HP, 220V, single-phase, 3.6 Amp, 1725 RPM, 60
Hz cycle, V-belt power transfer; Maximum board width: 36-1/2"; Maximum board thickness: 6"; Minimum
board length: 14"; Air requirements: 70 PSI; Surface speed of drums: 2,565 FPM; Conveyor feed rate:
Variable, 15-49 FPM; Overall dimensions: 69-5/8" H x 52-1/8" W x 49-3/8" D; Approximate shipping
weight: 2,310 lbs.
ITEM# W1756 – $16,695.00
43" Wide-Belt Sander
ITEM # D3003 - 15" x 20" Belt Cleaning Pad
This wide-belt sander was built for the woodworkers who need the complete control of a felt platen for feather sanding and hard-roller sanding. With all of the most
important features that have been proven effective over the years, this machine
will deliver great workpiece finishes quickly and consistently.
Sanding belt motor: 25 HP, 220V /440V*, 3-phase, 64/32A; Belt feed motor: 2 HP, 220V /440V*,
3-phase, 6/3A; Table elevation motor: 1/4 HP, 220V /440V*, 3-phase, 1.2/0.6A . Pressure roller type
(double): Rubber; Infeed drum: Spiral Grooved Rubber; Outfeed drum: Steel; Belt roller diameter
(each): 4"; Platen: Micro adjustable graphic/felt; Sanding belt size: 43" x 60"; Maximum board dimensions: 43"W x 6"H; Minimum board length: 14"; Conveyor speeds: Variable, 14-60 FPM; Surface
speed of drums: 2,200 FPM; Approximate shipping weight: 2,490 lbs.
Order 1-800-445-4669
63
Conestoga Woodworking Supply
Sanders
ITEM# W1757 – $18,675.00
43" Double Head Wide-Belt Sander
ITEM # D3003 - 15" x 20" Belt Cleaning Pad
Double heads, triple benefits! Take advantage of three types of sanders in
one. You have the feathering benefits of a platen type sander, the surface
benefits of a drum type sander, and the surface removal and time saving benefits of a dual-grit double drum sander.
Sanding motor HP: 25 HP, TEFC, 220V /440V*, 3-phase, 64/32A; Conveyor motor HP: 2 HP,
TEFC, 6.5/3.3A; Table lift motor HP: 1/4 HP, TEFC, 1.2/0.6A; Footprint: 61" x 31"; Maximum board
width: 43"; Maximum board thickness: 6"; Minimum board length: 14" ; Minimum board thickness:
3/16"; Front drum surface speed: 3,543 FPM; Rear drum surface speed: 2,565 FPM; Conveyor
speed: 14-60 FPM; Sanding belt size: 43" x 60"; Overall size: 66-1/4" W, 85-1/4" H, 63" D; Approx.
shipping weight: 3,384 lb.
Dust Collection
ITEM# W1690 – $289.00
43" Deluxe Ceiling Mounted 3-Speed Air Cleaner
ITEM # D3209 - 1 Micron Inner Filter
ITEM # D3210 - 5 Micron Inner Filter
An essential machine for any shop creating dust, you can rest easy knowing
that this little machine is filtering out the tiny dust particles that can raise big
health concerns.
Motor: 1/5 HP, 115V, 1725 RPM, single-phase; Motor amperage: 2 amps, 2-1/2 amps, 3
amps; 3 Motor speeds: 750, 960, 1,200 RPM; Fan sound rating: 62 dB, 67 dB, 69 dB; Air
flow: 556 CFM, 702 CFM, 1,044 CFM; Primary filter: 5 micron, pleated type; Secondary
filter: 1 micron, bag type; Unit dimensions 3-1/4 " L x 24-1/8" W x 12-1/8" H; Approximate
shipping weight: 78 lbs.
ITEM# W1685 (1-1/2 HP Dust Collector) – $275.00
ITEM# W1666 (2 HP Dust Collector) – $300.00
1-1/2 & 2 HP Dust Collectors
ITEM # D1795 - Replacement Upper Bag
ITEM # D1796 - Replacement Lower Bag
ITEM # D3116 - 2.5 Micron Oversized Bag, 18" X 40"
ITEM# W1727 – $215.00
1 HP Dust Collector
ITEM # D3545 - Replacement Lower Bag
Motor: 1 HP, 110V 1220V, single-phase; Motor
amp draw: 9/4.5; Air suction capacity: 800
CFM; Static pressure: 5.67"; Number of 4"
intake holes: 1; Impeller: 9" balanced
steel, radial fin; Bag
capacity: 2.1 cubic feet;
Portable base size:
15-3/4" x 39-3/4"; Bag
size (dia. x depth): 14-3/4"
x 24-3/8" (2); Standard
bag filtration: 2.5 micron;
Powder coated paint; Height
with bags inflated: 54-1/2";
Approximate shipping weight:
59 lbs.
Order 1-800-445-4669
Motor size: 1-1/2 HP, 11OV, single-phase, 16A, 3,450 RPM (W16S5);
Motor size: 2 HP, 220V, single-phase, 9A, 3,450 RPM (W1666); Portable base size: 21-1/2" X 33-1/2"; Bag volume: 5.4 cubic feet; Static
pressure: 10.1" (W1685), 12.3" (W1666); Height (with bags inflated):
78"; Air suction capacity: Approx. 1,280 CFM (W16S5), 1,550 CFM
(W1666); Impeller: Balanced steel,
radial fin 12"; 6" inlet has a
removable "Y" fitting
w/ two 4" openings;
Standard bag filtration: 30 micron;
Approximate
shipping weight:
108 lbs.
ITEM# W1687 – $532.00
3 HP Dust Collector
ITEM # D1795 - Replacement Upper Bag
ITEM # D1796 - Replacement Lower Bag
ITEM # D3116 - 2.5 Micron Oversized Bag, 18" X 40"
Motor: 3 HP, 220V, single-phase, 3,450 RPM, 18 Amp; Impeller: 13" balanced steel radial fin; Maximum inlet size: 8";
Inlet adapter: 4-way x 4" inlets; Air suction cap.: Approx. 2,830 CFM; Static pressure: 14.4"; Bag size (Dia. x depth): 19"
x 33" (4); Height (with bags inflated): 78"; Bag volume: 10.8 Cubic Feet; Standard bag filtration: 30 micron; Approximate
shipping weight: 167 lbs.
64
Conestoga Woodworking Supply
Dust Collection Accessories
Elbows
Elbows are necessary whenever duct work changes direction, such as from a dust collector to an overhead main line,
or when connecting individual machines to branch lines.
Outer Centerline
Dia. Radius Price
W-1016 3" 3" $5.95
W-1017 4"
4" $6.95
Reducers
These fittings provide a step down from a larger main line to smaller
branch lines. This step-down increases air velocity near the machine
where it's needed most. These three size reductions will handle most
system needs.
W-1020 W-1011 W-1037 Outer Overall
Dia. Size Price
3" x 2" 4" x 3" x 3" $3.95
4" x 3" 2-7/16" x 4" x 4" $3.95
5" x 4" 3-3/8" x 5" x 5" $3.95
Combination Adapters
Universal Adapter
9-1/2" X 6" X 6"
W-1039 - $6.95
We engineered the inside diameter of the 2-1/2" side of each of
these fittings to duplicate the 2-1/2" opening on your shop-vac.
Insert the shop-vac brand hose to the vac and the other end to one of
these fittings to power the dust collection system. The outside diameter matches our
standard dust collection hose to function as regular reducers.
Outer Overall
Dia. Size Price
W-1041 2-1/2" x 3" 3-3/16" x 3" x 3" $4.95
W-1044 2-1/2" x 4" 4-1/2" x 4-1/4" x 4-1/4" $5.49
Seven-step
adapter provides
a multitude of dust collection reducing options. Simply cut
away unneeded steps with a hacksaw. Outside diameter
step sizes include 1", 2", 2-1/2", 3", 4", 5" and 6". Wall
thickness is 1/8".
T-Fittings
Splices
W-1012 W-1013 Splices round out our full line of special
fittings for dust collection systems. Used to Iconnect full sections of hose for longer runs lor to utilize short section.
Y-Fittings
Outer Centerline
Dia. Radius Price
W-1018 3" 5" x 3" x 3" $4.49
W-1019 4" 6" x 4" x 4" $4.95
Table Saw Dust Hood
W-1005 - $7.95
Specifications:
•Outlet dia.: 4" overall
•Flange: 3/4" wide
•Overall size:
14-1/16" x 14-1/16" x 2-1/2"
SHOP FOX® Benchtop Downdraft Tables
W-1733 - $139.95
These Bench Top Downdraft Sanding Tables provide simple
and economical solution to capturing the dust created by portable hand sanders. Low profiles allow these sanding tables
to sit on top of the workbench during sanding operations and
then store out of the way when not needed. Internal baffles
& slotted table surface maximize air movement and dust
control. Non skid top and feet.
T-fittings provide the option of adding branches to a system to service each
machine in a shop. 1's are very helpful when space or design constraints
prohibit the use ofY's. Available in 3" and 4" OD.
Outer Dia. 3" 4"
Overall
Size 7-5/8" x 2-7/8" x 6" 9-3/4" x 4-1/16" x 8" Y's are used to attach branch lines to service more than one machine. This
design provides increased lateral air flow and efficiency over other types of
fittings. These popular fittings are available in 3" or 4" diameters.
W-1014 W-1015 Outer Dia. 3" 4"
Overall
Sizes Price
7-7/8" x 2-7/8" x 6-3/4" $5.95
9-13/16" x 4-1/16" x 8-1/4" $6.95
Quick Disconnect
W-1038 - $4.95
Designed to attach to the
end of a 4" flexible hose
and then press-on to any
4" diameter dust hood for
a quick and easy friction fit.
Ideal for use with smaller
capacity, mobile dust collectors
to service multiple machines. Eliminates the need to connect
and disconnect a hose clamp each time a new woodworking machine is used. Stays secure and airtight
Specifications: •Small outside dia.: 3-7/S" •Large outside dia.: 4-1/4"
Universal Dust Hood
W-1010 - $5.95
Specifications:
•Outlet dia.: 4" overall
•Flange: 3/4" wide
•Overall size:
14-1/16" x 14-1/16" x 2-1/2"
Order 1-800-445-4669
•Length: 4"
Jointer Dust Hoods
W-1001 fits over a 6-1/2" x 6-1/2"
chute and W-1002 fits over a 7" x
8-1/2" chute. Attach with screws or
double-sided tape.
Specifications:
•Outlet dia.: 4" overall
•Flange: 3/4" wide
Universal Dust Port
W-1042 - $5.49
Specifications:
•Overall size: 20" W x 25" L x 5" H
•4" Dust port
•Approximate weight: 24 lbs.
Price
$5.95
$7.95
Our Universal Dust Port fits over a 3"
hole. Inside diameter accepts standard
shop-vac hose.
Specifications:
•Material thickness: 3/32"
•Overall size: 4" x 3-5/8" x 3-13/16"
•Outside dia.: 2-1/2"
•Flange: 3/4" wide
65
Overall Size Price
W-1001 8-1/4" x 8-1/4" x 2-1/2" $5.95
W-1002 8-7/16" x 10-1/4" x 2-1/2" $6.49
Conestoga Woodworking Supply
Dust Collection Accessories
Large Dust Collection Separator
(Fits 30-gal. Trash Can)
Model W-1049 - $29.95
Grounding Kit
Model W-1053 - $11.70
1
Our Dust Collection Separator increases the efficiency Sawdust enters
and capacity of standard dust collection system. DeSeparator
signed to fit securely
directly through
on top of a standard
hose con30-gallon metal
trash can', this
nected to your
molded ABS
machine.
fitting is engineered to use
cyclonic action
2
to drop out larger
Large porticles are removed
particles from the
dust flow. The fitting features molded inlets and outlets which can be from dust flow and deposited
easily connected to standard systems using 4" flexible hose. You'll
into trash.
be amazed at how well it works! Metal trash can must be used for
grounding purposes. Fits cans with 20"- 21" diameter opening.
3
Remaining fine
dust goes into
your dust collector.
All dust collection
systems bu static electricity, and if grounded, that
electricity bec! a hazard
that could start a fire
grounding kit provides every you need to ground a
collection system, including directions installation.
A large system may need
more than kit, so keep
plenty of these on hand.
This Sc accessory is
essential to any complete
collection assortment.
Hose Hangers (4-1/4")
Model D-2107 - $1.00
Floor Sweep
Model W-1003 - $9.95
This is one of the handiest items to have in the shop! Use it in conjunction with our 4" blast gate (W-1007) to clean Support flexible hose anywhere with
up floor messes. Sweep dust in, and it's gone! Close the blast gate when the floor sweep is not in use. Attaches these hose hangers. Fasteners not
included.
easily to the floor with double-sided tape.
Specifications:
• Overall size: 24" x 3-1/2" x 7"
• Outlet dia.: 4" overall
• Weight: .73 Ibs.
• Material thickness: 3/32"
• Flange: 3/4" wide
Hose Clamps
Model W-1025 (2") - $.79
Model W-1024 (6") - $1.82
Model W-1316 (3") - $.60
Model W-1317 (4") - $.95
This is one of the handiest items to have in the shop! Use it in conjunction with
our 4" blast gate (W-1 007) to clean up floor messes. Sweep dust in, and it's
gone! Close the blast gate when the floor sweep is not in use. Attaches easily
to the floor with double-sided tape.
Blast Gates
Aluminum
Model W-1141 3" OD - $10.95
Model W-1142 4" OD - $12.95
Black ABS Plastic
Model W1006 3" OD - $4.95
Model W1007 4" OD - $5.95
Model W1008 5" OD - $7.95
Model W1009 6" OD - $9.95
Specifications:
• Overall size: 24" x 3-1/2" x 7"
• Outlet dia.: 4" overall
• Weight: .73 Ibs.
• Material thickness: 3/32"
• Flange: 3/4" wide
Used in every dust collection system to control air flow from one machine to another, blast gates maximize
system efficiency. We offer blast gates in both blackABS plastic and aluminum. Plastic blast gates are
economically priced, have a textured surface and an easy sliding gate action. For those customers who prefer
metal, our top quality aluminum blast gates feature a cast aluminum body with steel gate and locking knob.
Our blast gates are fast movers!
Wire
Steel
Black Dust Collection Hose
W-1026 (2" x 10') - $12.00
W-1027 (2-1/2" x 10') - $12.90
W-1028 (3" x 10') - $14.60
W-1031(4" x 10') - $17.95
W-1032(4" x 20') - $29.95
W-2033(5" x 10' Clear) - $27.95
Micron Canister Filter
Model 708739 - $295.00 (20" Dia. Canister Filter)
709563 - $18.00 (20" Clear Plastic Bags)(set of 5)
Clear Wire Reinforced Hose
W-1034 (4" x 10') - $38.95
W-1035 (5" x 10') - $52.95
W-1036 (6" x 10') - $48.95
Get superior dust collection with our Dust Dog canister filters
V-weaver filter design captures particles as small as 2 microns
- standard cloth bags only filter down to 30 microns. Dust Dog filters reduce air resistance to provide a 10% to 20% CFM increase
versus standard dust collectors. This is a real plus. Dust disposal
is also easier because you can now use clear disposable bags.
The thick V-weave of the canister filter offers a huge increase in
filtering area when compared to standard filter bags. Cleaning
the canister filter is easy. Simply turn the top-rounded handle to
rotate an internal cleaning flapper. The flapper shakes filtered dust
into the collection bag mounted underneath. Fits on any 19-20" dia.
housing, bottom bag gets replaced with a clear plastic bag. 20" housing retro kit available if your dust
collector does not have a 19-20" housing. Canister filter also available for 1 HP dust collectors.
Order 1-800-445-4669
66
Dust Collection Basics
Handbook
W-1050 - $5.95
Conestoga Woodworking Supply
Scroll Saw
ITEM# W1713 - $139.95
16" Variable Speed Scroll Saw
Olson Scroll Saw Blades
#
ITEM # D2056 - Tool Table
Variable speed control, extra cutting capacity and cast iron construction are the features most sought after in a Scroll Saw. The
SHOP FOX® Scroll Saw also offers a gooseneck work light, dust
blower and dust port, large 45◦ tilt table and easy blade changes.
Uses standard plain and pin end saw blades.
1/8 HP, 0.8 Amp., 110V, 60HZ; Variable speed motor; No load speed: 550-1,700
SPM; Maximum cutting thickness: 2"; Maximum cutting width: 16"; Cast iron table;
Blade stroke: 3/4"; Approximate shipping weight: 40 Ibs.
Width
tpi
Price
5" Pin End Blades (6 Blades Per pack)
40501
.100"
20 For Thin Cuts in Wood 3/32" to 1/2"
$3.95
41001
.100"
7 Aggressive Cuts in Wood Up to 2" thick
$3.95
41201
.100"
10 Cuts in Wood to 1"
$3.95
42003
.100"
9/5 Rev. Bottom has reverse teeth for splinter free cuts up to 1-1/2"
$3.95
42401
.070"
18.5 Extremely thin cuts in wood up to 112"
$3.95
49501
Assortment 10,15, 18.5 tpi 18 blades
$6.95
Plain End Blades (12 Blades Per pack)
42002
.100"
. 9/5 Rev. Fast Cutting Medium Finish .038"
$4.95
446R
.038"
12.519 Rev. Tight Radius Smooth Finish
$4.95
438
0.53"
11 Double Tooth Efficient Chip Removal
$4.95
437
0.44"
13 Double Tooth Close Radius Tooth
$4.95
448
0.45"
11.5 Skiptooth Fast Cuts/Smooth Finish
$4.95
44300
0.29"
20 Skiptooth Tight Radius Work
$4.95
461
0.32"
46 Spiral Tooth Cuts in all directions No need to turn your work piece
$4.95
Precision Ground Tooth (6 Blades Per pack)
45502
0.40"
10/7 Rev. Reverse tooth, accurate, tight radius cutting
$3.95
45702
0.46"
10/7 Rev. steady close radius cutting
$3.95
45902
0.48"
8/6 Rev. fast close radius cutting
$3.95
Precision Ground Tooth (PGT®) Scroll Saw Blades are "The Best" blades available!
Tested and endorsed by experts, PGT blades outperform and outlast all other blades.
Their razor sharp teeth cut faster, smoother, and more accurately in both straight and
radius cuts. A unique tooth geometry and widely spaced gullets minimize burning and
provide rapid chip removal. They are made of the finest carbon steel for maximum
strength, durability, and longest blade life. Blades are 5" long with plain ends.
Wood Lathes
ITEM# W1752 - $250.00
Bench-Top Wood Lathe
ITEM # W1753 - Extended Bed For W1752
- $120.00
All cast iron construction and a 1/2 HP motor provide plenty of power and stability to turn
bowls up to 10" wide and spindles up to 15-1/2" long, or 38" long with the optional Extended Bed. This stable bench-top wood lathe has six speeds ranging from 480 to 4023
RPM, providing the flexibility for any turning project. Includes: Live center, spur center, 3"
face plate, and tool rest.
Motor: 1/2 HP, 110V, 6A single-phase; Swing over bed: 10"; Distance between centers: 15-1/2", 38"
with optional extension bed; Tailstock travel: 3-1/4"; Swing over tool rest: 7-1/2"; Speeds: 480, 1270,
1960, 2730, 3327, 4023 RPM; 1" x 8 TPI right hand spindle; Tool rest length: 6-1/4"; MT #2 spindle taper
and tailstock taper; Includes tool rest, live rolling center, spur center and 3" face plate; Overall dimensions:
37" L x 8" D x 15" H; Approximate shipping weight: 102 Ibs.
ITEM# W1758 - $529.00
- $72.50
- $105.00
ITEM # D1089 - 4-Jaw Chuck
ITEM # D1090 - 3-Jaw Chuck
2 HP Variable Speed Wood Lathe w/ Cast Iron Legs & Digital Readout
Here it is! Our fully featured and powerful wood lathe at a competitive price! Featuring a hefty 2 HP
motor, ten speeds, a swivel-head for outboard turning, a digital tachometer for exact spindle speed,
precision ground cast iron bed, headstock and tails tack quick locks, and heavy cast iron legs for
stability, this beauty will handle it all!
Motor: 2 HP, 110V, single-phase; Swing over bed: 16"; Distance between centers: 43"; Heavy-duty, precision ground cast
iron bed and cast iron legs ensures stability and minimal vibration; I" x 8" TPI RH headstock spindle; Spindle tachometer
with digital readout; MT#2 spindle & tailstock tapers; Spindle bore: 3/8"; Standard tool rest extension; 10 speeds: 600 - 2400
RPM; Quick lock/release levers for tailstock & headstock; 0°, 60°, 90°, 120° and 180° headstock rotation; Overall dimensions:
76-1/2" L x 19" W x 48-3/4" H; Approximate shipping weight: 294 Ibs.
Order 1-800-445-4669
67
Conestoga Woodworking Supply
Mortising Machines
ITEM# W1671 - $239.00
Mortising Machine
ITEM # D2056 - Tool Table
The super heavy-duty fence and hold down eliminates unwanted wood movement and "sticking chisels" - an all too common complaint. The unique swiveling base allows easy off-thebench operations and the extra height and depth capacity allows the use of much larger stock
for perfect mortises every time.
Motor size: 3/4 HP 3,450 RPM, aluminum finned; Adjustable
depth stop rod; Hydraulic cylinder for softer releases; Double
support columns; Jacobs taper #2 spindle, 1/2" JT #2 chuck;
Mortise to the center of a 8" wide board; Mortise lumber to
8-3/4" thick; Heavy cast iron construction; Extra long (22")
quick set handle; Unique swiveling base; Micro adjustable
fence; Approx. shipping weight: 94 Ibs.
Mortising Chisels
1/4" & 3/8"
1/2"
5/8"
3/4"
Price
$12.00
$15.00
$18.00
$19.00
ITEM# W1743 - $1,155.00
Heavy-Duty Mortising Machine w/ Stand
This mortising workstation handles everything from standard cabinet door stiles to posts and beams up to 9" wide. Its
unique X and Y table movement makes mortise positioning a snap and its tilting head and angled fence adjustment
allows compound setups for any mortise you can imagine. Accepts mortising chisels with 5/8" and 3/4" collars.
Motor: 1-1/2 HP, 110V / 220V, prewired 110V, 14/7 A, single-phase, TEFC, 1,725 RPM; Table size: 19" x 12-1/2"; Vertical spindle travel: 9"; Head vertical
travel: 3"; Table longitudinal travel: 14-1/2"; Table cross travel: 3"; Column tilt: + 30◦; Fence angle: 0 - 30◦; Chisel capacity: 1/4" - 1"; Maximum chisel
stroke: 6-1/4"; Maximum workpiece width: 9"; Chuck capacity: 1/2"; Collar size: 5/8" and 3/4"; Spindle speed: 1,725 RPM; Overall size: 71" H x 36" W x
24" D; Approx. shipping weight: 315 Ibs.
Dovetail Machines
ITEM# W1804 - $3,010.00
11" Dovetail Machine
ITEM # D3696 - Replacement Dovetail Bit
Making dovetail joints has never been so easy! Simply set up the machine to match the stock width and thickness,
make a few adjustments to get a glove-like fit, and then crank out dozens of perfect dovetail joints every hour. Accepts workpieces as large as 11-1/4" wide x 28" long and as small as 2-3/8" wide x 7-7/8" long. Includes templates
for four different dovetail sizes.
Motor: 1 HP, 110V / 220V, single-phase, prewired 110V; Table size: 19-1/2" x 7"; Floor to table
height: 38-5/16"; Overall size: 28" W x 23" D x 57" H; Number of spindles: 1; Spindle speed:
18,500 RPM; Dovetail bit: 10° angle x 5/8" long; Dovetail shank: 12mm; Dovetail templates:
1", 1-1/2", 2" & 2-1/2"; Maximum dovetail height: 3/4"; Minimum dovetail height: 3/16"; Maximum thickness: 1-3/4"; Minimum thickness: 13/32"; Maximum stock size: 11-1/4" W x 28" L;
Minimum stock size: 2-3/8" W x 7-7/8" L; Approximate shipping wt.: 418 lbs.
ITEM# W1805 - $3,795.00
16-1/2" Dovetail Machine
ITEM # D3696 - Replacement Dovetail Bit
This model is the luxury version of the machine above. Instead of cam-lock
clamps this machine features pneumatic clamps that are faster and easier to
use, a larger workpiece capacity, and magnetic switch control. Also, the motor is inverted so vertical workpieces are inserted/removed from above rather
than below, which makes it easier and more ergonomic to operate.
Motor: 1 HP, 110V / 220V, single-phase, prewired 220V; Cast aluminum carriage; Table size: 24"
x 7-3/4"; Floor to table height: 46-7/16"; Overall size: 38" W x 28" D x 57" H; Number of spindles:
1; Spindle speed: 18,500 RPM; Dovetail bit: 10° angle x 5/8" long; Dovetail templates: 1", 1-1/2",
2" & 2-1/2"; Dovetail shank: 12mm; Maximum dovetail height: 3/4"; Minimum dovetail
height: 3/16"; Maximum thickness: 2-3/8"; Minimum thickness: 13/32"; Maximum stock size:
16-1/2" W x 59" L; Minimum stock size: 2-1/8" W x 7-7/8" L; Approximate shipping wt.: 539 lbs.
Order 1-800-445-4669
68
Conestoga Woodworking Supply
Lathes
ITEM# 2018.001 (2HP, 1Ph) - $4,223.00
Classic Lathe
The Oliver 2018 Classic lathe brings the Lathe back to the Oliver Line, and in true Oliver fashion. Starting with a solid, stable cast iron base
and legs, Oliver adds a powerful 2hp Motor with a wide speed range for a variety of tasks. An RPM meter gives you an accurate read on your
speed so you can precisely adjust for any particular job. Cast iron is found throughout, on the bed and tool rest, as well as the headstock
housing. But the best feature on this lathe is the inboard and outboard headstocks, enabling you to work on very large bowls on the outboard
side of the machine.
Power Requirement AC 230V; Motor (1 ph) 2HP, 220V; Motor (3ph) 2HP, 220V or 440V Prewired 220V; Swing Over Bed 18"; Distance Between
Centers 42"; Variable Speed 200-2500 RPM; Speed Range 1 - 200-600 RPM; Speed Range 2 - 600-2400 RPM; Spindle 1-1/4"-8TPI RH headstock spindle; Index Spindle every 30 degree (1 hole) every 10 degree (3 hole); Spindle & Tailstock Tapers MT2; Spindle Bore 9/16"; Face
Plate O.D. 6"; Centerline of Spindle to Floor 42-1/2"; Overall Dimension 69"x48"x18"; Weight 732 lb.
Table Saws
ITEM# 4016.003 (5HP, 1Ph) - $2,875.00
ITEM# 4016.004 (5HP, 3Ph) - $2,790.00
10" Table Saw
The Oliver 4016 10" Table Saw is like a luxury sports car - powerful and smooth. With a 5HP motor, it's got torque
to spare for big jobs. And like the best luxury cars, this machine runs smooth. Where others tout the "nickel test," we do
the "dime test." This is due in part to our poly v-belt drive system - belts that run smoother, with less vibration, giving you
the highest quality cut available. Top it all off with Oliver's Optimus square tube fence and a digital blade angle readout
system and you've got a saw that tears it up with accuracy and in style.
Blade Diameter 10"; Arbor Diameter 5/8"; Maximum Depth of Cut at 90° 3" ; Maximum Depth of Cut at 45° 2-1/4"; Maximum
Cut to the Right of Blade 36"; Maximum Cut to the Left of Blade 12"; Dust Port Diameter 4"; Table Dimensions 27" x 21-1/3";
Table Dimensions w/Extensions 27" L x 33-1/3 W"; Table Height 36"; Blade Tilt - Left; Arbor Speed (RPM) 3,450; Motor (1ph) 5HP,
220V; Motor (3ph) 5HP, 220V or 440V Pewired 220V; Overall Dimensions 74"L x 32-I/2"W x 40"H; Gross Weight 658 lbs.
ITEM# 4045.003 (5HP, 1Ph) - $3,375.00
ITEM# 4045.004 (7.5HP, 3Ph) - $3,375.00
12" Tablesaw
The Oliver 4045 12" Table Saw is sure to be a centerpiece of any shop it calls home. A powerful 5 or 7.5 horsepower motor gives ample
torque for slicing through hard lumber. Power is transmitted to the blade via a poly-V belt, making this machine run exceptionally smooth.
Where others tout the "nickel test," we do the "dime test" Top it all off with Oliver's Optimus square tube fence system and a digital blade
angle readout system and you've got a saw that tears it up with accuracy and in style. The 4045 brings it all to the table, with quality, reliability and a perfect cut, time and time again.
Blade Diameter 12";
Arbor Diameter 1" or 5/8" interchangeable; Maximum Width of Dado 13/16"; Maximum Depth of Cut at 90°: 4"; Maximum Depth of Cut at 45° Degrees
2-2/3"; Maximum Cut to the Right of Blade 36"; Maximum Cut to the Left of Blade 12"; Dust Port Diameter 4"; Table Dimensions w /Extensions 30-3/4" L x 48-1/2 W"; Table Height 36"; Blade
Tilt - Left; Arbor Speed (RPM) 3,450; Motor (1 ph) 5HP, 220V Only; Motor (3ph) 7.5HP, 220V /440V Prewired 220V; Overall Dimensions 75" L x 45" W x 41" H; Gross Weight 803 lbs.
ITEM# 4060.001 (10HP, 3Ph) - $4,633.00
16" Tablesaw
The Oliver 4060 16" Table Saw brings back a long Oliver tradition of sizeable table saws. Like many Oliver saws before
it, this 16" behemoth is built beyond any reasonable expectations, so when you ask it to go the extra mile, it does so with ease. A 16" blade
gives you almost 6" of cutting capacity, and the 10HP motor gives you power to spare. Oliver's Optimus square tube fence system gives
you a quick-adjusting, rock-solid guide for wood. Older Oliver tablesaws are legendary, and like its ancestors before it, the Oliver 4060
promises to be a fixture in any shop it calls home for a long, long time.
Blade Diameter 16"; Arbor Diameter 1 "; Maximum Depth of Cut at 90° - 5-3/4"; Maximum Depth of Cut at 45° - 4-1/4"; Maximum Cut to the
Right of Blade 36"; Maximum Cut to the Left of Blade 18"; Dust Port Diameter 4"; Table Dimensions w/extensions 48" L x 38" W; Table Height
34-1/4"; Blade Tilt - Right; Arbor Speed (RPM) 3,750; Motor (3ph) 10HP, 220V or 440V Prewired 220V; Overall Dimensions 75" L x 48" W x 43"
H; Gross Weight 1,040 lbs.
Jointers
ITEM# 4230.201 (2HP, 1Ph Helical) - $1,975.00
ITEM# 4230.001 (2HP, 1Ph Straight) - $1,575.00
ITEM# 4230.201B (2HP, 1Ph Byrd Shelix) - $2,155.00
8" Jointer
f you're in the market for an 8" jointer, but tired of all the light-duty models out there, the Oliver 4230 8" Jointer is just what the
doctor ordered! With a long 75" table and an ample 38" fence, your stock comes out straight and true every time. A heavy-duty 2
horsepower motor provides plenty of power for your toughest stock and most rigourous hours. The cast iron base helps minimize
vibration, and it comes stock with a solid carbide helical cutterhead, giving you less tear out. Add a helical cutterhead that comes
stock with long-lasting inserts and you've got a winner by anybody's standards.
Infeed Table Travel 1/2"; Cutterhead Speed (RPM) 5500, 3 V-Belts; Number of Knives (Straight) 4; Number of Knives (Helical) 54; Rabbeting
Cappacity 1/2"; Dust Port Diameter 4"; Table Dimensions 74-7/8" L x 9-1 /4" W; Fence Dimensions 38" L x 4" W; Base Dimensions 38" L x 19" H;
Overall Dimensions 75-1/2" L x 32" H x 41" W; Fence Tilts 90°- 45°; Positive Stops 90° and 45°; Motor (1 ph) 2HP, 220V Only; Motor (3ph) 2HP, 220V / 440V, Prewired 220V;
Gross Weight 655 lbs.
Order 1-800-445-4669
69
Conestoga Woodworking Supply
Jointers
ITEM# 4240.001 (3HP, 1Ph Straight) - $3,105.00
ITEM# 4240.004 (5HP, 3Ph Straight) - $3,105.00
ITEM# 4240.201 (3HP, 1Ph Helical) - $3,735.00
ITEM# 4240.204 (5HP, 3Ph Helical) - $3,735.00
The Oliver 4255 12" & 4270 16" Jointers are ready for anything you can throw at them. With ample jointing capacity you'll
be hard pressed to find a job that outclasses these machines. With
a super long bed and a sizeable fence, your stock comes out straight
and true every time. A powerful Baldor motor gives you the torque you need to joint the
toughest hardwoods with ease. The solid cast iron base cements it in place, minimizing
unwanted vibration and ensuring you the smoothest cut possible, while the noise reduction slots and optional helical cutterhead bring the noise levels down substantially. It's
Oliver tradition and innovation in full effect.
10" Jointer
The Oliver 4240 10" Jointer is making waves. Why? Because it's heavier, quieter, more
precise, more powerful, and has a very competitive price. With a super long 84" table
and an ample 45" fence, your stock comes out straight and true every time. A Baldor
TM 5 or 3 horsepower motor provides plenty of power for your toughest stock and most
rigourous hours. The solid cast iron base puts it in the heavyweight category and eliminates
unwanted vibration. Top it all off with the optional spiral cutterhead, giving you less tear out
along with quick-change blades and you've got a winner by anybody's standards.
ITEM# 4255.001 (3HP, 1Ph Straight) - $5,371.00
ITEM# 4255.002 (5HP, 3Ph Straight) - $5,371.00
ITEM# 4255.101 (3HP, 1Ph Helical) - $6,391.00
ITEM# 4255.102 (5HP, 3Ph Helical) - $6,391.00
(With Byrd Head) - $6,109.00
Infeed Table Travel 5/8"; Cutterhead Speed 6000, 3 V-Belts; Number of Knives (Straight)
4; Number of Knives (Spiral) 3; Number of Knives (Helical) 64; Rabbeting Cappacity 5/8";
Dust Port Diameter 6"; Table Dimensions 84" L x 11" W; Table Height 30-1/2"; Fence
Dimensions 45" L x 4-3/4" H; Fence Tilts 90°- 45°; Positive Stops 90° and 45°; Motor (1 ph)
3HP, 220V Only; Motor (3ph) 5HP, 220V / 440V, Prewired 220V; Overall Dimensions 84" L x
30" W x 38-1/2" H; Gross Weight 975 lbs.
12" Jointer
Infeed Table Travel 1"; Cutterhead Speed (RPM) 6,000; Number of Knives (Straight) 4;
Number of Knives (Helical) 44; Rabbeting Cappacity 3/4"; Dust Port Diameter 6"; Table
Dimensions 92" L x 13" W; Table Height 32"; Fence Dimensions 60-3/8" L x 5-5/8" H;
Fence Tilts 90°- 45°; Positive Stops 90° and 45°; Motor (1 ph) 3HP, 220V; Motor (3ph)
5HP, 220V /440V, Prewired 220V; Overall Dimensions 92" L x 39" W x 40" H; Gross
Weight 1,700 lbs.
ITEM# 4270.001 (5HP, 1Ph Straight) - $7,134.00
ITEM# 4270.002 (7HP, 3Ph Straight) - $7,134.00
ITEM# 4270.101 (5HP, 1Ph Helical) - $7,995.00
ITEM# 4270.102 (7HP, 3Ph Helical) - $7,995.00
(With Byrd Head) - $8,077.00
16" Jointer
Infeed Table Travel 1"; Cutterhead Speed (RPM) 6,000; Number of Knives (Straight) 4;
Number of Knives (Helical) 58; Rabbeting Cappacity 3/4"; Dust Port Diameter 6"; Table
Dimensions 102" L x 17" W; Table Height 32"; Fence Dimensions 68-1/2" L x 5-1/2" H;
Fence Tilts 90°- 45°; Positive Stops 90° and 45°; Motor (1 ph) 5HP, 220V; Motor (3ph)
7-1/2 HP, 3HP, 220V /440V, Prewired 220V;
Overall Dimensions 102" L x 45" W x 40"
H; Gross Weight 2,200 lbs.
Planers
ITEM# 4455.001 (7.5HP, 1Ph Straight) - $5,945.00
ITEM# 4455.002 (10HP, 3Ph Straight) - $5,945.00
ITEM# 4455.103 (7.5HP, 1Ph Helical) - $8,077.00
ITEM# 4455.104 (10HP, 3Ph Helical) - $8,077.00
(With Byrd Head) - $8,077.00
22" Planer
Two words describe the 4455: tough and precise. With 22" width capacity this machine
has no problem removing material. But volume isn't everything, this Oliver outputs stock
that's true and straight, thanks to a set of devices that work together to firmly guide stock
through the machine. A Sectional Infeed Roller and Chip Breaker apply uniform pressure on uneven stock, coupled with a Driven Outfeed Roller to keep your stock moving
smoothly. Add 2 feed speeds, a Digital Thickness Guage for quick reference and a powerful 7.5 or 1 OHP motor, and you've got a planer that's ready to tackle the toughtest tasks!
Maximum Stock Width 22"; Maximum Depth of
Cut 3/16"; Maximum Stock Thickness
9"; Minimum Stock Thickness 1/8";
Minimum Stock Length 10"; Dust Port
Diameter 5"; Minimum CFM Required
900; Infeed Roller Diamater 3";
Outfeed Roller Diamater 3-5/16"; Feed
Speeds (FPM) 20 and 30; Bed Rollers
- 2, Adjustable; Table Size 32-1/4" L
x 23-3/4" W; Footprint 44" L x 22" W;
Overall Dimensions 45" W x 32" D x
50" H; Cutterhead Diameter 3"; Number of Knives (straight) 4; Number of
Knives (helical) 90 (30mm) 146(byrd);
Cutterhead Speed (RPM) 5,000; Table
Support: 2-Column; Motor (1ph)
7.5HP, 220V Only; Motor (3ph)
10HP, 240V / 440V, Prewired 220V;
Gross Weight 1,568 lbs.
Order 1-800-445-4669
ITEM# 4470.001 (10HP, 1Ph Straight) - $8,400.00
ITEM# 4470.002 (15HP, 3Ph Straight) - $8,400.00
ITEM# 4470.101 (10HP, 1Ph Helical) - $9,525.00
ITEM# 4470.102 (15HP, 3Ph Helical) - $9.525.00
(With Byrd Head) - $9,525.00
25" Planer
The Oliver 4470 25" Planer puts other
planers to shame. With over two full feet
of cutting width, over 9" of cutting capacity,
this planer will take whatever you can dish
out. The Digital Thickness Controller and
Powered Table Travel eliminate guesswork, make dialing in settings a breeze.
But ease of operation isn't everything, a
Sectional lnfeed Roller and Chip Breaker
apply uniform pressure on uneven stock,
coupled with Driven Outfeed Rollers to
keep your stock moving. The results are
luxuriously flat boards. Add a powerful 15
or 10HP motor, and you've got a planer thats ready to tackle anything!
Maximum Stock Width 25"; Maximum Stock Thickness 9-1/4"; Minimum Stock Thickness
1/8"; Minimum Stock Length 10"; Dust Port Diameter 5"; Minimum CFM Required 900; Infeed
Roller Diamater 3"; Steel Outfeed Roller Diamater 3"; Feed Speeds (FPM) 20, 25 and 30; Bed
Rollers 2, Adjustable; Table Size 32" L x 26" W; Cutterhead Diameter 3-3/8"; Number of Knives
(straight) 4; Cutterhead Speed (RPM) 4,800; Table Support: 2-Column; Motor (1ph) 10HP,
240V only; Motor (3ph) 15HP, 240V / 440V Prewired 220V; Overall Dimensions 46" L x 23" W x
56" H; Gross Weight 1,837 lbs.
70
Conestoga Woodworking Supply
Bandsaws
Oliver's 4640 & 4665 20&24" Bandsaws have what it takes to handle the biggest tasks with power and finesse. The rubber tired cast iron wheels are finely balanced for precision tracking and reduced vibration. The table is precision ground cast iron with ample space, along with a T-slot for the included miter gauge. The
fence locks securely and quickly. A foot brake stops the saw blade quickly, helping keep the operator safe. The heavy gauge steel frame keeps this
machine on the ground and minimizes vibration so your cuts are straight and accurate.
ITEM# 4640.001 (3HP, 1Ph) - $3,465.00
ITEM# 4640.002 (5HP, 3Ph) - $3,465.00
20" Bandsaws
Blade Speed (SFPM) 4,000; Wheel Diameter 20"; Table Dim. 26-3/4" W x 20-1/2" L; Throat Distance 19"; Max. Stock Height 11-1/4"; Blade Length
157"; Blade width Cap. 1/4" to 1-1/4"; Table Height at 90° 33-3/4"; Table Tilt Limits 0° to 45°; Motor (1 ph) 3HP, 220V Only; Motor (3 ph) 5 HP, 220V
/ 440V, Prewired 220V; Gross Weight 750 Ibs.; Overall Dimensions 32" x 21" x 73".
ITEM# 4665.001 (5HP, 1Ph) - $4,592.00
ITEM# 4665.002 (7.5HP, 3Ph) - $4,592.00
24" Bandsaws
Blade Speed (SFPM) 5,000; Wheel Diameter 24"; Table Dim. 31-1/2" W x 23-3/4" L; Throat Distance 23"; Max. Stock Height 13-3/4"; Blade Length
176"; Blade width Cap. 1/4" to 2"; Table Height at 90° 34-1/2"; Table Tilt Limits 0° to 45°; Motor (1 ph) 5HP, 1 Ph, 220V Only; Motor (3 ph) 7.5 HP,
220V / 440V, Prewired 220V; Gross Weight 900 Ibs.; Overall Dimensions 42" x 31.5" x 81.5".
Shapers
Oliver 4710 & 4750 Shapers are built to dish out whatever cuts you need. The 4750 has a sliding table, increasing safety and helping shape those
difficult to handle pieces. The beefy spindle is reversable and locks, helping you to change a wide variety of cutters quickly. The cast iron miter
gauge on both machines has a hold down, as well. A five speed step pulley system gives you a wide range of speeds, from 3,000 to 10,000 RPM.
All this powered by a 5HP motor on a heavy cast iron base and you've got a machine built the Oliver way.
ITEM# 4710.001 (5HP, 1Ph) - $5,248.00
ITEM# 4710.002 (5HP, 3Ph) - $5,248.00
Shaper
Table Dimensions 41-1/2" x 29-1/2"; Table Height 34-1/4"; Spindle Speed (RPM) 3,000, 4,000, 6,000, 8,000,10,000; Spindle
Direction - Reversible; Vertical Spindle Travel 5"; Maximum Tool Height 5"; Maximum Tool Diameter 8-1/2"; Spindle Diameter
1-1/4"; Dust Port Diameter 4"; Minimum CFM 800; Motor (1 Ph) 5HP, 220V only; Motor (3 Ph) 5HP, 230 / 460V Prewired 230V;
Shipping Dimensions 41-1/2" L x 34-1/2" W x 49 H"; Gross Weight 950 Ibs.
ITEM# 4750.001 (5HP, 1Ph) - $5,904.00
ITEM# 4750.002 (5HP, 3Ph) - $5,904.00
Shaper w/ Sliding Table
Table Dimensions 41-1/2" x 29-1/2"; Table Height 34-1/4"; Sliding Table Travel 39-1/2"; Sliding Table Size 41-1/2" L x 9" W;
Spindle Speed (RPM) 3,000, 4,000, 6,000, 8,000,10,000; Spindle Direction - Reversible; Vertical Spindle Travel 5"; Maximum
Tool Height 5"; Maximum Tool Diameter 8-1/2"; Spindle Diameter 1-1/4"; Dust Port Diameter 4"; Minimum CFM 800; Motor (1 Ph)
5HP, 230V; Motor (3 Ph) 5HP, 230 / 460V Prewired 230V; Shipping Dimensions 41-1/2" L x 34-1/2" W x 49 H"; Gross Weight 1,050 Ibs.
Ripsaws
ITEM# 4910.001 (7.5HP, 1Ph) - $8,760.00
ITEM# 4910.004 (10HP, 3Ph) - $8,760.00
ITEM# 4925.001 - Call for Pricing
12" Econo-Line Ripsaw
The Oliver 4910 Econo-Une Ripsaw is the little
brother to the 4925 Straight Une Ripsaw, but don't
let its size fool you, it has many of the features of it's big brother at a fraction of the cost. As
the only 12" straight line ripsaw available in single phase, the 4910 is a wonderful solution
for smaller shops. The Cast Iron Feed Chain guides the stock through the machine and the
Adjustable Spring Loaded Pressure Rollers hold it steady, assuring a 7' glue line cut. Safety
features include three rows of Anti-Kickback
Fingers, a Safety Interlock on the Saw Blade Door
and a rear mounted Emergency Shutoff Switch.
Add features like Auto Feed Chain Lubrication and
you've got a saw that can't be topped for the price!
The Oliver 4925 Straight Une Ripsaw has an appetite unmatched by mere mortal machines.
AA optional laser lets you take aim at longer cuts and 1he precision cast iron micro adjustable fence ensures a marathon guaranteed 10' glue line cut. The cast iron feed chain guides
the stock 1hrough the machine and the spring loaded pressure rollers hold it steady as 1he
12" blade rips. Add features like auto chain lubrication, a pivoting control panel and numerous safety featuers and you've got a saw that can't be topped!
Arbor Diameter 1"; Blade Diameter 12"; Blade Speed
(RPM) 4,500; Feed Speed - 7 Speed: 50-130 FPM
Variable; Cutting Depth 3-3/8"; Maximum
Ripping Width 18"; Minimum Board
Length 8"; Pressure Rollers 6; AntiKickback Device(s) 2; Table Size 361/4" W x 57-1/8" L; Table Height
32"; Dust Collection
Port 4"; Minimum
CFM Required 600;
Feed Motor 2HP, 3Ph, 230 /
460V; Control 24V Magnetic;
Motor 15HP, 3Ph, 230 / 460V;
Overall Dimension 44" L x 76" W
x 56" H; Gross Weight 3,019 Ibs.
Arbor Diameter 1"; Blade Diameter 12"; Blade Speed
4,500 RPM; Feed Speed (FPM) 45, 60
and 70; Max Cutting Depth
3.35"; Minimum Board Length
8"; Maximum Ripping Width
13.75"; Pressure Rollers 6; Anti-Kickback
Devices 3; Table Size 30" W x 50" L; Table Height 30";
Dust Collection Port 4"; Minimum CFM Required 600;
Feed Motor 1 HP 230 / 460V; Control - 24V Magnetic;
Motor(1 ph) 7.5HP, 230 only; Motor(3ph) 10HP, 230 /
460V prewired 230; Overall Dimensions 38" L x 69"
W x 56" H; Gross Weight 2,310 lbs.
Order 1-800-445-4669
12" Straight Line Ripsaw
71
Conestoga Woodworking Supply
Hollow Chisel Mortiser
Cutoff Saws
ITEM# 5025.001 (7-1/2 HP, 1Ph) - $4,915.00
ITEM# 5025.002 (7-1/2 HP, 3Ph) - $4,751.00
ITEM# 5125.001 - $2,880.00
18" Cutoff Saw
Hollow Chisel Mortiser
The Oliver 5025 Cutoff Saw is the smart choice for increasing productivity in your shop.
Solid construction and ingenius design are the hallmarks of Oliver Machines, and the
5025 is no exception. The heavy duty base transmits less vibration, and the cast iron
precision engineered fence means your cuts are straighter and deaner. The conveniently
located foot pedal allows for hands free cutting operation, and the easily adjustable
workpiece clamp means you spend less time fiddling with
adjustments and more time cutting. The 5025 cuts boards
up to 4x9" or 12x2" at a rate of up to 60 cydes
per minute, and the full coverage
guards ensure against accidents.
Arbor Speed (RPM) 3,450; Arbor Size 1";
Blade Size 18"; Cutting Capacity at Maximum
Height 4-1/4" x 9-3/4"; Cutting Capacity Width
1" x 13-3/8"; Table Size 26-1/4" x 27-1/2";
Table Height 32-3/4"; Air Supply Required
(CFM/PSI) 15 / 70; Maximum Cycles Per Minute 60; Dust Port 4"; Minimum Dust Removal
(CFM) 600; Main Motor (1 ph) 7-1/2HP, 220V
Only; Main Motor(3ph) 7-1/2HP, 220 / 440V
Prewired 220V; Gross Weight 800 Ibs.; Gross
Weight (Roller Table Set Infeed/Outfeed/lbs.
200; Overall Dimensions 30" L x 32" W x 44 H"
Jointer Planer
ITEM# 5240.101 - $35,000.00
25" Jointer Planer
The Oliver 5125 Chisel Mortiser offers the capacity and flexibility
you need to get those big tasks done. It has long, adjustable,
spring loaded handles to give you maximum leverage on hard
wood. A powerful1.5HP motor rides on a heavy-duty vertical
track, giving it a 61/8" vertical travel. The whole assembly can
move almost 10" side to side, and almost 4" front to back. The
table tilts 45° in either direction, or remove it entirely
for big jobs and get up to 46" of capacity for entry
doors and the like.
Chuck Capacity 1/2"; Bushing Sizes 3/4" I.D. or 5/8" I.D. (1-1/8"
O.D.); Chisel Stroke 6-1/8"; Chisel Travel - Side to Side 9-1/8",
Front to Back 3-3/8"; Maximum Workpiece Height (Without
Table) 46"; Maximum Workpiece Height (With Table Installed)
11-1/2"; Maximum Workpiece Width 6-1/2"; Table Size 14-5/8"
L x 7-1/8" W; Table Tilt
Limits +/- 45°;
Oscillating Spindle Sander
Fence Size 14-5/8"
L x 11-3/4" H; Base
Size 25-1/2" L x
19-3/4" W; Overall Height 80";
Motor Speed
(RPM) 1,725; Motor
1-1/2HP, 1 Ph, 220V Only; Gross
Weight 622 Ibs.; Overall Dimensions
29" L x 29" W x 67" H.
The Oliver 5240 25" Jointer Planer is a beast. Two helical cutterheads and four motors
work together to output stock planed to thickness on both sides. But lest
you think this machine is all brawn and no brains, don't forget
the many features that make this a dream to
operate and maintain: the 5240 has full digital
thickness control; just dial in the thickness
and go. A variable speed conveyor (with
automatic lubrication) gives you control over
your finish, and automatic pressure fingers
hold uneven wood firmly. Two carbide helical
cutterheads hold an edge for ages
and are easily accessible. The 5240
is a workhorse that takes whatever you
feed it and outputs wonderfully flat and true
boards.
ITEM# 6910.003 - $1,872.00
Oscillating Spindle Sander
The Oliver 6910 Spindle Sander does perfectly what other sanders can't: finely sands
concave surfaces. The oscillating motion of its spindle uses more of the paper and
dissipates heat much more efficiently than standard spindle sanders, helping to prevent
burning and streaking. Plus, the rubber drums can be mounted on both ends, so you can
use the entire spindle. The extra large precision ground table tilts 45° both directions
and has a positive stop at 0°, plus corner cuts for easier operation all the way around the
machine. The base is heavy gauge steel giving you a stable surface to work on, and it
offers storage space for up to 10 extra spindles while not in use.
Maximum Stock Width 25"; Maximum
Stock Tickness 8"; Minimum Stock Length
12"; Feed Speed (FPM) 21- 66; Cutterhead Speed (RPM) 5,000; Number of Knives Per
Cutter Head 164; Cutterhead Diameter 5"; Dust Port Diameter 6"; Table Dimensions 27" L
x 103" W; Motor (Bottom Cutterhead) 20HP, 3Ph, 220V / 440V Prewired 220V; Motor (Top
Cutterhead) 25HP, 3Ph, 220V / 440V Prewired 220V; Motor (Feed) 3HP, 3Ph, 220V / 440V
Prewired 220V; Motor (Table Elevation) 1/2HP, 3Ph, 220V / 440V Prewired 220V; Gross
Weight 7,900 Ibs.; Overall Dimensions 105" L x 44" W x 67" H.
Table Material - Cast Iron; Table Size 25-1/4" x 27-1/4"; Table Tilt 0 to 45°; Table Height
(Floor to Top) 42-1/2"; Number of Table Inserts 3; Spindle Speed (RPM) 1,720 RPM;
Oscillation Travel 1-1/2"; Oscillations Per Minute 75; Spindle Sizes (dia. x length) 1/4" x
5", 3/8" x 6", 1/2" x 6", 5/8" x 6", 3/4" x 9", 1" x 9", 1-1/2" x 9", 2"x9", 3"x9", 4"x9"; Dust
Port Diameter 4"; Overall Dimensions 25-1/4" L x 27-1/4" W x 50" H; Motor (1ph) 2 HP,
110V / 220V; Gross Weight 320 Ibs.
Industrial Widebelt Sanders
ITEM# 5370.001 (10 HP, 1Ph) - $12,375.00
ITEM# 5370.003 (15 HP, 3Ph) - $12,375.00
ITEM# 5380.003 - $15,375.00
25" Industrial Widebelt Sander
37" Industrial Widebelt Sander
he Oliver 5370 25" Wide Belt Sander is the natural choice for belt sanding needs. Its 25"
width will handle large sanding chores, and the digrtal control system gives you precisely
the results you need. A longer than average 75" belt helps it run cooler for a better finish
on thin stock. Everything about this machine is designed to give you the most
accurate, highest quality and most efficient results, from the optical
sensors to automatically adjust tracking, to the variable speed
conveyor belt, to the powerful 15HP motor and solid construction, this machine is built the Oliver way.
Thee Oliver 5380 37" Wide Belt Sander is the natural choice for I belt sanding needs. Its 37"
width will handle large sanding chores, and the digital control system gives you precisely the
results you need. Everything about this machine is designed to give you the most accurate,
highest quality and most efficient results, from the optical sensors to automatically adjust
tracking, to the variable speed conveyor belt so you can dial in exactly how fine a finish you
want, to the powerful20HP motor and solid construction,
this machine is built the Oliver way. Flip this sheet over for
a peek under the hood and discover more reasons why the
5380 is right for you.
Maximum Stock Width 25"; Maximum Stock Thickness 6";
Minimum Board Length 12"; Minimum Stock Thickness 1/8"; Air
Requirements (PSI) 70; Dust Port Diameter 5"; Exhaust Value
Required (CFM) 800; Abrasive Belt Dimensions 75" L x 25" W;
Feed Speed (FPM) Variable, 16 - 49; Main Motor 10HP, 1 Ph,
220V Only - 15HP, 3Ph, 220 / 440V Prewired 220V; Conveyor
Motor 1 HP, 1 Ph, 220V Only - 1 HP, 3Ph 220 / 440V Prewired
220V; Table Height Adjust Motor 1/4HP, 1 Ph, 220V Only 1/4HP, 3Ph, 220 / 440V Prewired 220V; Gross Weight 2,060
Ibs.; Overall Dimensions 46" L x 52" W x 78" H.
Maximum Stock Width 37"; Maximum Stock Thickness 6";
Minimum Board Length 12"; Minimum Stock Thickness
1/8"; Air Requirements (PSI) 70; Dust Port Diameter 5";
Exhaust Value Required (CFM) 1,000; Abrasive Belt
Dimensions 75" L x 37" W; Feed Speed (FPM) Variable,
16 - 49; Main Motor 20HP, 3Ph, 220 / 440V Prewired 220V;
Conveyor Motor 1 HP, 3Ph, 220 / 440V Prewired 220V; Table
Height Adjust Motor 1/4HP, 3Ph, 220 / 440V Prewired 220V;
Gross Weight 2,530 Ibs.; Overall Dimensions 60" L x 57" W x 78" H
Order 1-800-445-4669
72
Conestoga Woodworking Supply
Vertical Panel Saws
ITEM# C-4 – $1,429.00
The C4 model packs all of the features of the full-size saws into a portable 5'
Made in
frame. This panel saw can travel to work sites and fit into shops with limited
USA
floor space. The C4 is ideal for cutting 4'x8' sheets of material.
STANDARD EQUIPMENT
● 3-1/4 HP, 15 AMP industrial duty saw motor; SPECIFICATIONS
●Max. crosscut: 50"
● Zinc plated 1-3/4" steel guide tubes;
●Max. rip cut: 96"
● 4 Nylatron roller bearing systems
●Max. cut thickness: 1-3/4"
● Adjustable vertical & horizontal rulers
● Quick change from vertical to horizontal cutting ●Cut accuracy, straight & square: 1/32"
●Saw blade diameter: 8"
● Thin material pressure guard
●Motor: 120 V, 15 AMP (220 V available)
● Injection-molded plastic material rollers
●Frame length: 60"
● Spring loaded counter balance system
●Shipping weight: 189 Ibs.
● 1 year parts warranty
● Lifetime frame warranty
All Panel
Saws are
Drop Ship
Items
Accessories for C-4 - Wheels, Extensions, Quick Stop, Stand, Hold Down Bar & Midway Fence.
ITEM# H-4 – $1,959.00
ITEM# H-5 – $2,129.00
ITEM# H-6 – $2,409.00
The H-Series offers full-sized vertical panel saw productivity in economical machines. H-Series saws cut within 1/32" on a wide variety of panel materials up to
1-3/4" thick, and are available in three standard crosscutting widths, 50",64" and
73". H-Series saws are used in all kinds of panel processing applications.
STANDARD EQUIPMENT
● 3-1/4 HP, 15 amp industrial duty saw motor
● Zinc plated 1-3/4" steel guide tubes
● 4 Nylatron roller bearing systems
● Adjustable vertical & horizontal rulers
● Quick change from vertical to horizontal cutting
● Thin material pressure guard
● Injection-molded plastic material rollers
● Spring loaded counter balance system
● 1 year parts warranty
● Lifetime frame warranty
SPECIFICATIONS
●Max. crosscut: H-4 - 50"; H5 - 64"; H6 - 73"
●Max. rip cut: Unlimited
●Max. cut thickness: 1-3/4"
●Cut accuracy, straight & square: 1/32"
●Saw blade diameter: 8"
●Motor: 120 V, 15 AMP (220 V available)
●Frame length: 120"
●Shipping weight: H4 - 244 Ibs; H5 - 298
Ibs; H6 - 359 Ibs
Accessories for H Series- Wheels, Quick Stop, Stand, Hold Down Bar, Midway Fence,
Stop Bar and Extensions.
ITEM# 6400 – $3,579.00
ITEM# 6800 – $3,995.00
These two vertical panel saws utilize heavy-duty worm gear driven saw motors
for production applications. The additional steel supports in the frame, worm
driven motor, double guide tube bearings and machined aluminum material rollers result in heavier duty machines with a guaranteed cutting accuracy of 1/64"
straight and square. The 6400 cuts panels up to 64" wide, while the
STANDARD EQUIPMENT
● 3 HP worm driven heavy duty saw motor 6800 can handle extra wide sheets up to 73".
● 10' welded steel frame
SPECIFICATIONS
● Chrome plated 1-3/4" guide tubes
●Max. crosscut: 6400 - 64"; 6800 - 73"
● 8 Nylatron roller bearing systems
●Max. rip cut: Unlimited
● Adjustable vertical & horizontal rulers
●Max. cut thickness: 1-3/4"
● Quick change from vertical to horizontal cutting ●Cut accuracy, straight & square: 1/64"
● Thin material pressure guard
●Saw blade diameter: 8"
● Solid aluminum material rollers
●Motor: 120 V, 15 AMP (220 V available)
● Enclosed counterweight system
●Frame length: 10'
● 1 year parts warranty
●Shipping weight: 6400 - 598 Ibs;
● Lifetime frame warranty
6800 - 660 Ibs
ITEM# 7400 - $9,225.00
ITEM# 7400XL - $9,680.00
Order 1-800-445-4669
The 7400 saws are designed for continuous production and tight tolerance cutting. With a 2 HP, 220 V heavy-duty
induction motor (ungradable to 3 HP, 3 PH), these saws handle the toughest applications. The saw carriage travels
vertically on two heavy extruded beams utilizing Dual-Vee bearings to deliver cutting accuracy to 0.005" straight and
square. The 7400XL offers an extra large 13' frame length for cut- SPECIFICATIONS
ting panels in excess of 10' in length. Specify these machines
●2 HP continuous duty induction saw motor
for heavy production requirements, large panels and close
●Welded steel frame & integrated stand system
tolerance panel processing applications.
●Dual V-track precision guide system
STANDARD EQUIPMENT
● Max. crosscut: 64"
● Max. rip cut: Unlimited
● Max. cut thickness: 2-1/8"
● Cut accuracy, straight & square: .005"
● Saw blade diameter: 8"
● Motor: standard 220 V, 1 PH, 11 amp;
Optional 230 V, 3 PH, 7.6 amp
● Frame length: 7400 - 120"; 7400XL - 156"
● Shipping weight: 7400 - 950 Ibs;
7400XL - 1050 Ibs
73
●Adjustable vertical & horizontal rulers
●Quick stop gauges (8' left, 5' right)
●Quick change from vertical to horizontal cutting
●Floating pressure saw foot
●Solid aluminum material rollers
●Enclosed counterweight system
●Mid-Way Fence
●Dust collection ready
●Hold down bar
●1 year parts warranty
●Lifetime frame warranty
Conestoga Woodworking Supply
Wide Belt Sanders
WIDE BELT SANDERS FEATURES AND BENEFITS
WIDE BELT HIGHLIGHTS
Safety Speed Cut has been manufacturing high quality, American made
material processing equipment since 1958. Our wide belt sanders are
a simple design, easy to operate and maintain and made from high
quality components. Like over 50,000 satisfied customers, you will appreciate our commitment to building tools that make your manufacturing
process more efficient and improve your products
● Heavy welded construction minimizes vibration to ensure consistent, smooth operation.
● Large hinged access doors make belt changes fast and easy.
● Photo-electric eye controls constant pressure air piston belt tracking. Unique design promotes trouble- free, low maintenance operation.
● Welded dust chute and internal shielding means easy integration into most existing dust collection systems.
● Four post acme jackthread table support for fast, accurate table height
adjustment. Three ply gum rubber rough-top endless conveyor belt.
ITEM# 3760 (10HP, 1PH) – $9,679.00
ITEM# 3760 (10HP, 3PH) – $9,679.00
ITEM# 3760 (15HP, 3PH) – $9,679.00
The 3760 is a serious wide belt sander for the small woodworking shop. This machine packs most of the features of
our larger sanders into a lower cost machine. The 3760 is available with a 10 HP single or three phase motor or a 16
HP three phase motor. Where else can you get high quality American made wide belt sander for under $10,000?
Max. working width: 36"; Max. working length: Unlimited;
OPTIONAL EQUIPMENT
Max. working thickness: 7-1/4"; Machine height: 63"; Machine width: 47"; ● Digital height positioning readout
Shipping wt. approx.: 1400 Ibs; CFM requirement: 1800 CFM
● Hour meter
ITEM# 4375 (10HP, 1PH) – $13,769.00
ITEM# 4375 (15HP, 3PH) – $13,769.00
ITEM# 4375 (20HP, 3PH) – $13,769.00
ITEM# 4375 (30HP, 3PH) – $14,529.00
The Series 75 Wide Belt Sanders deliver serious results. With
heavier construction than the 3760 wide belt, a fully adjustable
platen, variable speed DC powered conveyor table, and large
7-1/4" throat opening, the Series 75 Sanders are ready to go to work in
your busy shop environment. The large 75" sanding belt has 25% more abrasive
surface than competing 60" belt machines. Larger sanding belts accumulate less heat and
debris requiring less maintenance and fewer belt replacements.
Max. working width: 42"; Max. working length: Unlimited;
Max. working thickness: 7-1/4"; Machine height: 70";
Machine width: 54"; Shipping wt. approx Ibs.: 2500
Edgebanders
OPTIONAL EQUIPMENT
● Digital height positioning readout
● Motorized table height adjustment
● Hour meter
ITEM# 72GP – $11,389.00
ITEM# 60HA – $8,489.00
The 72GP Edgebander is the newest member of the Safety Speed Cut
family. The 72GP boasts features available in larger, more expensive
machines but in a compact and affordable package. This machine features
a micro adjust tape guide for quick tape changes, electromagnetic end cutters, and the accutrim edge trim system that eliminates the need to file or
sand trim edges. The glue pot with an adjustable glue extrusion performs
similar to units costing thousands of dollars more. The price and performance of this machine makes it the perfect choice for the small to medium
sized woodworking shop.
Safety Speed Cut now offers a Hot Air Edgebander that is small in size yet
big in ability. The new 60HA Edgebander features fingertip electronic variable
speed control and digital electronic temperature control. A micro adjust tape
guide for quick tape changes, electromagnetic end cutters, a pressure roller,
and the accutrim edge trim system that eliminates the need to file or sand
trim edges makes this unit a very dependable edgebanding solution. The
innovative design of this machine makes it extremely easy to operate and the
Made in USA assures quality that you would expect from us.
Dimensions (shop) 60" L x 40" H X 36" D; Shipping Weight: 325 Ibs/148 kg;
Power Supply: 220V, 20 amps. 1~; Tape Types: Preglued Polyester / PVC /
Wood; Tape Widths: 1/2"/13mm to 1-3/4"/45mm;
Max Thickness: 1mm; Max Feed Rate: 15 FPM
Dimensions (shop) 72" L x 48" H x 37" D; Shipping Weight: 400 Ibs/182
kg; Power Supply 220V, 20 amps. 1~; Tape Types: Polyester / PVC / Wood
Single Laminate Strips; Tape Widths: 1/2"/13mm
to 1-3/4"/45 mm; Max Thickness: 1mm; Max
Feed Rate: 24 FPM
Made in
USA
Order 1-800-445-4669
74
Conestoga Woodworking Supply
Panel Clamps
SINGLE DOOR CLAMP
Model # 79K-6 – $2,495.00
REDI SPREADER
Model # 150B – $595.00
The one lever, pneumatically operated
door clamp
● Clamp and square a
cabinet door in one second
● 26" x 62" capacity
● Clamps are easily
repositioned for quick change-overs
● Newly redesigned heavy duty steel frame
● 45 deg. angle
The Redi-Spreader provides an accurate and
efficient glue spread. Works well with our panel
clamps to quickly apply glue to multiple boards. A
perforated aluminum grid, 6"x27" , rises from the aluminum
glue container by a foot activated pedal to provide the correct
amount of adhesive. Boards over 27" can be "dipped" twice.
An aluminum cover for the glue container extends glue use.
Fast, convenient, easy to use and clean.
DOUBLE DOOR CLAMP
Model # 79K-8-DDC – $4,745.00
6' PANEL CLAMP
Model # 79F-6-PC – $1,795.00
● Capacity 38" x 84"
● 2 Horizontal clamps
● 4 Vertical clamps
● Removable center bar
● Custom or production
The 6' Panel Clamp is ideal for the space-limited, medium production
shop. This dedicated gluing station offers 5 levels for glue-ups. Clamps
easily lift out and slide from side to side. The 6' Panel Clamp is offered as
a package with 8 clamps with room for additional production. Choose 32"
or 40" opening clamps.
DOUBLE DOOR CLAMP
Model# 79K-10 – $5,980.00
● Fast pneumatic clamping & squaring
● 6 reliable heavy duty pneumatic
diaphragm cylinders
● One lever operation
● 2 cross clamps
for rails
8' PANEL CLAMP
Model# 79F-8-PC – $2,795.00
● 4 draw clamps for stiles
● 45° deg. angle for easy
access
● Adjustable clamp positioning
● 2" deep square
● Capacity 48" x 120"
● Removable center bar
Our most popular Panel Clamp for cabinet shops, stair and millwork
manufacturers, furniture makers and other woodworking professionals.
Same features as the 6' Panel Clamp but with more gluing capacity. The
8' panel clamp is offered as a package with 18 clamps with room for more
clamps. Choose 32" or 40" opening clamps.
12' PANEL CLAMP
Model# 79F-12-PC – $4,100.00
Our highest production Panel Clamp. As a package, the 12' Panel Clamp
comes with 30 clamps. There are 5 gluing levels and space available for
approximately 50 clamps. Choose 32" or 40" opening clamps.
DRAWER CLAMP
Model# 190B-M2 – $3,595.00
● For dovetail drawers .
● Fast pneumatic clamping
● Convenient footvalve operation
● Fast & easy changeovers
● Vertical roller adjustment
● 5 position horizontal clamp
(12 Panel)
Buddy System
If you glue up panels and cabinet doors and have limited
shop space, JL T Clamps has the solution. We've taken
our panel clamp system and our door clamp system and
now offer this new space saver.
79R-8
79R-12
79R-12-DDC
8' Buddy System with 5 $4,895.00
gluing levels & 26" x 62"
door clamping capacity
12' Buddy System with 5 $6,695.00
gluing levels & 26"x62"
door clamping capacity
12' Big Buddy System $8,995.00
with 5 gluing levels &
38"x84" double door
clamping capacity
►
Side Two Features:
● 1 second squaring
● 70° convenient work position
● 1 lever operation with new speed control valve
● Shown with optional holdster
Side Two
Order 1-800-445-4669
Side One Features:
● 5 gluing levels
● Now with new vertical clamp hanger feature
● 8' Panel clamp with 18 clamps
or
● 12' panel clamp with 30 clamps & room for more ● Available with 32" or 40" opening clamps
►
75
Side One
Conestoga Woodworking Supply
JLT Clamps
Model # 79X-5-A – $14,195.00
Model # 79X-5-DM – $29,000.00
5 Section Pneumatic Door Pro
High Production - No Pinning - Quick Changeovers
5 Section Dual Station Miter Door Pro
(2) Separate Pneumatic: Miter Squaring Assemblies Dual
Control System - Fast Changeovers - No Pinning
DOOR PRO FEATURES:
Made in
● The best, the original rotary door clamp
● Optional auto index upgrade available
USA
● Optional door stile glue applicator available
● Pneumatic roller clamps are easily adjustable for fast changeovers
● 26" x 62" maximum capacity per section
● 100 percent heavy duty steel construction - built to last guaranteed
● Clamp and square door face up
● Eliminate pinning - save time and increase quality
● Fast one lever operation - clamp & square cabinet doors
perfectly in 2 seconds
● 110v electric gear motor for counter clockwise rotation
● Always in stock and ready to ship for quick delivery
● Produce 200 to 400 stile & rail doors per shift
DUAL STATION FEATURES:
● 10 Total miter squaring stations (26" x 42' left side) (26" x 42" right side)
● Dial control system allows for a fast & accurate squaring process for perfect miter doors
● Will successfully clamp & square any type of mitered cabinet door
● Can be used with 2 operators simultaneously
● Offers 2 vertical pneumatic Made in
and 2 horizontal
USA
pneumatic clamps
● Dial pressure in or out for fine adjustment while cabinet door is under clamp pressure
● No pinning required - clamps doors face up for better quality
● Will also successfully clamp & square stile & rail doors
● Produce 250 to 500 miter doors per shift
Footprint 13' L x 7' W x 9' H
Footprint 9' L x 7' W x 9' H
Model # 79X-5-M – $18,000.00
Model # 78D-6-S – $8,995.00
5 Section Pneumatic Door Pro
Revolutionary Dial control System with NO Compromise
Pneumatics - For Fast & Accurate Miter Squaring
MITER DOOR PRO FEATURES:
Includes many of the same features as the #79X-5-A
● Optional auto index upgrade available
● 26" x 62" maximum capacity per section
● Offers (2) vertical pneumatic and (2) horizontal clamps per section
● All clamps come complete with our newly designed DIAL CONTROL SYSTEM
● Increase or decrease air pressure on each clamp with easy to use, fast acting dial regulator
● Make fine adjustments to miter corner while clamp pressure is
activated
● Will also successfully clamp and square stile & rail cabinet doors
● Produce 150 to 350 miter doors per shift
Heavy Outy Rotary CIamping System
6 Section Panel Pro
Includes: Pneumatic Panel flattener & (20) #302-40-H-R
40" Opening Heavy Duty Taylor CIamps
PANEL PRO FEATURES:
● 40" x 80" capacity per section
● 110v electric gear motor fan rotation
● Designed for the custom shop, save time and space
● Additional 40" Taylor Clamps available
● Clamps are guaranteed NOT to twist, bow or bend
Made in
USA
Made in
USA
Footprint 9' L x 10' W x 10' H
Footprint 9' L x 7' W x 9' H
Model # 171A – $795.00
Roller Spreader
Order 1-800-445-4669
The Roller Spreader is a table top electric roller
type glue applicator. The 6" wide glue roll is
ideal for long stock or 'face' glued material. The
Roller Spreader operates on 110 Volts and there
is an easy adjustment for glue spread.
76
Conestoga Woodworking Supply
Boring Machines
ITEM# B0111 – $1,395.00
Mini Boring Machine
Mini 13 Line Boring Machine
●
●
●
●
●
●
30" fence and two flip stops; Two spring-loaded indexing pins; 32mm
(1-1/4") boring bit center line; 8" drilling capacity from edge of board;
Accepts bits with 10 millimeter flat shank, 7 Rights & 6 Lefts; 13 spindle
boring head with STEEL, heat treated helical OD ground gears; Baldor
motor: 3,450 rpm, 3/4 hp - 115 /230 [9.6/4.8 Amps] 60 Hz - Single
phase with Totally Enclosed Frame (TEFC), prevents internal
motor components from being contaminated by dust or
dirt; One year warranty on workmanship and manufacturing; Machine
weight (approx) 132 lbs, without optional stand. 170 lbs crated.
Simple to Operate.
Heat-Treated STEEL Helical Gears.
3,450 rpm TEFC BALDOR Motor for quick, easy, and "clean" drilling.
8" Drilling Capacity from edge of board.
Down Stoke Operation for easy viewing.
Additional Flip Stops, Fence Extensions and Stand Available Separately.
Boring Machine
Heat-treated
STEEL Gears
Picture shown
above is of boring head with
safety cover
removed.
ITEM# B0161– $2,595.00
13 Spindle Line Boring Machine
Two Flip Stops.; 64" fence capacity; Two spring loaded index pins; Two
spring loaded hold downs; Adjustable drilling speed & depth; Foot pedal
Made in
pneumatically operated (optional); Motor turns off with release of foot
pedal; 12-inch drilling capacity from edge of board; 32 millimeter
USA
centers, distance between fIrst and last drill = 15"; 13-spindle boring head
with heat treated steel helical gears; Baldor motor, 3,450 rpm, 2hp -110 volt (15/7.9-7.5 amps) 60 Hz Single Phase. (220 volt optional);
Accepts 10 millimeter flat shank bits, 6 Lefts & 7 Rights; Machine weight (approx.) 330 lbs, crated 380 lbs.; One year warranty on workmanship and manufacturing.
●
●
●
●
●
●
Simple to Operate.
Heat-Treated STEEL Helical Gears.
3,450 RPM TEFC BALDOR Motor for quick, easy, and "clean" drilling.
8" Drilling Capacity from edge of board.
Down Stoke Operation for easy viewing.
Additional Flip Stops, Fence Extensions and Stand Available Separately.
Made in
USA
By Conquest Industries
Molders
ITEM# Original W&H Molder – $1,895.00
Molder
The W&H Molder's low cost and its capacity to produce high quality
moldings is an unbeatable combination. The W&H provides a safer
alternative to a shaper and makes most profiles in a single pass. The
Original Molder is capable of producing straight and roundtop moldings as is, add the elliptical jig for all your elliptical molding needs! All
molders come equipped with a multi-pass system and use a two knife
self-aligning system making set up quick and easy!
Molder
Spring Loaded Hold
Downs and Index Pins
2 HP Motor; 7000 RPM Arbor; Height Above Final Cut: 3/16";
Max Profile Depth: 3/4"; Max Profile Width: 3/4"; Planes 7" wide;
Minimum Stock Length: 9"; Minimum Stock Thickness:1/4";
Maximum Stock Thickness: 8"; Working Height: 31";
Overall Height: 45"; Overall Width: 20"; Overall
Length: 33"; Pkg. Weight: Approx 220 lbs; Mfg warranty on motor
ITEM# 206 – $2,695.00
The W&H Model 206 with vari-feed and multi-pass combination provides
the operator much more versatility while increasing capacity. In addition, the
new guide system makes the machine more user friendly for our customers. Like the original model, the 206 is capable of producing straight, round
top moldings as is, add the elliptical jig for all your elliptical molding needs!
Elliptical Jig
ITEM# EJ92 - $587.00
The Williams & Hussey EJ92 ELLIPTICAL JIG expands your capability to produce diversified quality
molding. NOW with the EJ92 JIG mounted to the W & H you can easily produce elliptical molding.
From 7" radius with a maximum stock of 6-1/2", the EJ92 will satisfy your molding requirements.
Made in
USA
Order 1-800-445-4669
77
Conestoga Woodworking Supply