Sharp VC-H820U Service manual

FILE NO. 810-200327
SERVICE MANUAL
DVD VIDEO PLAYER
SD-4900
DOCUMENT CREATED IN JAPAN, Jul., 2003
SECTION 1
SUMMARY
CONTENTS
OWNER’S MANUAL(SD-4900) ............................................................................................... 1-2
PRODUCT SAFETY SERVICING GUIDELINES FOR VIDEO PRODUCTS ........... 1-36
SERVICING PRECAUTIONS ................................................................................................ 1-37
• General Servicing Precautions
• Insulation Checking Prodedure
• Electrostatically Sensitive Devices
1-1
DVD PLAYER
OWNER’S MANUAL
MODEL : SD-4900
3D SSouurrnodund
Before connecting, operating or adjusting this product,
please read this instruction booklet carefully and completely.
1-2
Safety Precautions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to
the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
FCC WARNING: This equipment may generate or use radio
frequency energy. Changes or modifications to this
equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The
user could lose the authority to operate this equipment if an
unauthorized change or modification is made.
REGULATORY INFORMATION: FCC Part 15
This product has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the product is
operated in a residential installation. This product generates,
uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this product does cause harmful
interference to radio or television reception, which can be
determined by turning the product off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
z Reorient or relocate the receiving antenna.
z Increase the separation between the product and
receiver.
z Connect the product into an outlet on a circuit different
from that to which the receiver is connected.
z Consult the dealer or an experienced radio/TV technician
for help.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES,
INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE
DANS LA BORNE CORRESPONDANTE DE LA PRISE ET
POUSSER JUSQU’AU FOND.
WARNING: Do not install this equipment in a confined space
such as a bookcase or similar unit.
CAUTION:
This Digital Video Disc Player employs a Laser System.
To ensure proper use of this product, please read this owner’s
manual carefully and retain for future reference, should the unit
require maintenance, contact an authorized service locationsee service procedure.
Use of controls, adjustments or the performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
Notes on copyrights:
It is forbidden by law to copy, broadcast, show, broadcast
via cable, play in public, or rent copyright material without
permission.
This product is equipped with copy protection measures
developed by Macrovision. Copy protection signals are recorded on some discs. When recording these discs on a VCR,
picture noise will appear during playback.
This product incorporates copyright protection technology that
is protected by certain U.S. patent claims and other intellectual
property rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection technology must
be authorized by Macrovision Corporation, and is intended for
home and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
SERIAL NUMBER: The serial number is found on the back of
this unit. This number is unique to this unit and not available to
others. You should record requested information here and
retain this guide as a permanent record of your purchase.
Model No. ___________________________________
Serial No. ___________________________________
To prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The apparatus shall not be exposed to water,
dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
1-3
CAUTION:
PLEASE READ AND OBSERVE ALL WARNINGS AND
INSTRUCTIONS IN THIS OWNER’S MANUAL AND THOSE
MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR
FUTURE REFERENCE.
This set has been designed and manufactured to assure personal safety.
Improper use can result in electric shock or fire hazard. The safeguards
incorporated in this unit will protect you if you observe the following procedures for installation, use, and servicing.
This unit does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE
EXPOSED TO DANGEROUS VOLTAGE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL ONLY.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
Read These Instructions
All safety and operating instructions should be read before the
product is operated.
Follow All Instructions
All operating and use instructions should be followed.
Keep These Instructions
The safety and operating instructions should be retained for future
reference.
Heed All Warnings
All warnings on the product and in the operating instructions should
be adhered to.
Power Sources
This product should be operated only from the type of power
source indicated on the marking label. If you are not sure of the
type of power supply in your home, consult your product dealer or
local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.
Grounding or Polarization
Do not defeat the safety purpose of the polarized plug has two
blades with one wider than the other. A grounding-type plug has
two blades and a third grounding prong. The wide blade or the
prong are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
Ventilation
Slots and openings in the cabinet are provided for ventilation and to
ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa,
rug or other similar surface. This product should not be placed in a
built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered
to.
Heat
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce
heat.
Water and Moisture
Do not use this apparatus near water. For example: near a bath
tub, wash bowl, kitchen sink, Laundry tub, in a wet basement; or
near a swimming pool.
Cleaning
Unplug this product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Clean only with dry cloth.
Power-Cord Protection
Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit
from the apparatus.
Overloading
Do not overload wall outlets, extension cords, or integral convenience receptacles, this can result in a risk of fire or electric shock.
Lightning
Unplug this apparatus during lightning storms or when unused for
long periods of time. This will prevent damage to the product due to
lightning and power-line surges.
Object and Liquid Entry
Never push objects of any kind into this product through openings
as they may touch dangerous voltage points or short-out parts that
could result in a fire or electric shock. Never spill liquid of any kind
on the product.
15. Attachments
Only use attachments/accessories specified by the manufacturer.
16. Accessories
Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
PORTABLE CART
avoid injury from tip-over.
WARNING
17. Disc Tray
Keep your fingers well clear of the disc tray as it is closing. It can
cause personal injury.
18. Burden
Do not place a heavy object on or step on the product. The object
may fall, causing serious personal injury and serious damage to the
product.
19. Connecting
When you connect the product to other equipment, turn off the
power and unplug all of the equipment from the wall outlet. Failure
to do so may cause an electric shock and serious personal injury.
Read the owner’s manual of the other equipment carefully and follow the instructions when making any connections.
20. Sound Volume
Reduce the volume to the minimum level before you turn on the
product. Otherwise, sudden high volume sound may cause hearing
or speaker damage.
21. Sound Distortion
Do not allow the product to output distorted sound for a longtime. It
may cause speaker overheating and fire.
22. Earphone
When you use the earphone, keep the volume at a moderate level.
If you use the earphone continuously with high volume sound, it
may cause hearing damage.
23. Laser Beam
Do not look into the opening of the disc tray or ventilation opening
of the product to see the source of the laser beam. It may cause
sight damage.
24. Disc
Do not use a cracked, deformed, or repaired disc. These discs are
easily broken and may cause serious personal injury and product
malfunction.
25. Damage Requiring Service
Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normal, or has been
dropped.
26. Servicing
Do not attempt to service this product yourself as opening or
removing the cover may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
27. Replacement parts
When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or
have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other hazards.
28. Safety Check
Upon completion of any service or repairs to this product, ask the
service technician to perform safety checks to determine that the
product is in proper operating condition.
1-4
INTRODUCTION
IMPORTANT SAFETY INSTRUCTIONS
Table of Contents
Introduction
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 2
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . 3
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . 6
About Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Front Panel and Display Window . . . . . . . . . . . . . . 7
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Preparation
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-11
Connecting to a TV . . . . . . . . . . . . . . . . . . . . . . 10
Connecting to Optional Equipment . . . . . . . . . . . 11
Before Operation . . . . . . . . . . . . . . . . . . . . . . . 12-16
General Explanation. . . . . . . . . . . . . . . . . . . . . . 12
On-Screen Display . . . . . . . . . . . . . . . . . . . . 12-13
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . 14-16
z Initial Settings General Operation. . . . . . . . . 14
z Language . . . . . . . . . . . . . . . . . . . . . . . . . . 14
z Picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
z Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
z Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
z Parental Control. . . . . . . . . . . . . . . . . . . . . . 17
Operation
Operation with DVD and Video CD . . . . . . . . . 18-21
Playing a DVD and Video CD. . . . . . . . . . . . . . . 18
General Features . . . . . . . . . . . . . . . . . . . . . . . . 18
z Moving to another TITLE/GROUP . . . . . . . . 18
z Moving to another CHAPTER/TRACK . . . . . 18
z Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
z Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
z Still Picture and Frame-by-Frame Playback . 19
z Slow Motion. . . . . . . . . . . . . . . . . . . . . . . . . 19
z Random . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
z Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 19
z Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
z Time Search . . . . . . . . . . . . . . . . . . . . . . . . 19
z Selecting the sound enhancement . . . . . . . . 20
z Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
z Marker Search . . . . . . . . . . . . . . . . . . . . . . . 20
Special DVD Features . . . . . . . . . . . . . . . . . . . . 20
z Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 20
z Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 20
z Camera Angle . . . . . . . . . . . . . . . . . . . . . . . 20
z Changing the Audio Language . . . . . . . . . . . 20
z Changing the Audio Channel . . . . . . . . . . . . 20
z Subtitles . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
DVD Audio Discs . . . . . . . . . . . . . . . . . . . . . . . . 21
z Moving to another GROUP . . . . . . . . . . . . . . 21
z Viewing another PAGE. . . . . . . . . . . . . . . . . 21
Operation with Audio CD and MP3/WMA Disc . . 22-23
Playing an Audio CD and MP3/WMA Disc . . . . . 22
Notes on MP3/WMA Recordings . . . . . . . . . . . . 22
z Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
z Moving to another Track . . . . . . . . . . . . . . . 23
z Repeat Track/ All/ Off. . . . . . . . . . . . . . . . . . 23
z Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
z Random . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
z Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 23
z Selecting the sound enhancement . . . . . . . 23
z Changing the Audio Channel . . . . . . . . . . . . 23
Operation with JPEG Disc. . . . . . . . . . . . . . . . . . . 24
Viewing a JPEG disc . . . . . . . . . . . . . . . . . . . . . 24
z Moving to another File . . . . . . . . . . . . . . . . . 24
z Still Picture . . . . . . . . . . . . . . . . . . . . . . . . . 24
z To flip the picture . . . . . . . . . . . . . . . . . . . . . 24
z To rotate picture. . . . . . . . . . . . . . . . . . . . . . 24
z Notes on JPEG Recordings . . . . . . . . . . . . . 24
Programmed Playback . . . . . . . . . . . . . . . . . . . . . 25
Programmed Playback with Audio CD and
MP3/WMA Disc . . . . . . . . . . . . . . . . . . . . . . . . . 25
Programmed Playback with Video CD . . . . . . . . 25
z Repeat Programmed Tracks . . . . . . . . . . . . 25
z Erasing a Track from Program List . . . . . . . . 25
z Erasing the Complete Program List . . . . . . . 25
Additional Information . . . . . . . . . . . . . . . . . . . 26-27
Screen Saver . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Dimmer Function . . . . . . . . . . . . . . . . . . . . . . . . 26
Video Mode Setting . . . . . . . . . . . . . . . . . . . . . . 26
Speaker Settings . . . . . . . . . . . . . . . . . . . . . . . . 27
Reference
Troubleshooting . . .
Language Code List
Area Code List. . . . .
Specifications . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
28
29
30
31
Others
LIMITED WARRANTY DVD VIDEO PLAYER . . . 32-33
About the symbols for instructions
Indicates hazards likely to cause harm to the unit
itself or other material damage.
Indicates special operating features of this unit.
Indicates tips and hints for making the task easier.
1-5
Before Use
Video CD (VCD)
(8 cm / 12 cm disc)
Regional code of the DVD player and DVDs
This DVD player is designed and manufactured
for playback of region “1” encoded DVD software. The region code on the labels of some
DVD discs indicates which type of player can play those
discs. This unit can play only DVD discs labeled “1” or
“ALL”. If you try to play any other discs, the message
“Check Regional Code” will appear on the TV screen.
Some DVD discs may not have a region code label even
though their playback is prohibited by area limits.
Audio CD
(8 cm / 12 cm disc)
Disc-related terms
Playable Discs
DVD audio discs
(8 cm / 12 cm disc)
In addition, this unit can play a DVD-R, and CD-R or
CD-RW that contains audio titles, MP3, WMA or JPEG
files.
Notes
– Depending on the conditions of the recording equipment or the CD-R/RW disc itself, some CD-R/RW
discs cannot be played on the unit.
– Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
– Do not use irregularly shaped CDs (e.g., heart-shaped
or octagonal). It may result in malfunctions.
– Because of problems and errors that can occur during
the creation of DVD software and/or the manufacture
of DVD discs, Toshiba America Consumer Products,
Inc., Toshiba Hawaii, Inc. and Toshiba of Canada, Ltd.
cannot guarantee that this player will play every feature of every DVD bearing the DVD logo. As one of the
creators of DVD technology, Toshiba DVD players are
manufactured to the highest standards of quality and,
as a result, such incompatibilities are very rare. If you
happen to experience and difficulty playing a DVD on a
Toshiba DVD player, please feel free to call our
Contact listed in “How to Obtain Warranty Services” on
page 32.
Notes on DVDs and Video CDs
Some playback operations of DVDs and Video CDs
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
disc content designed by the software manufacturer,
some playback features of the unit may not be available
or other functions may be added.
Refer also to the instructions supplied with the DVDs
and Video CDs. Some DVDs made for business purposes may not be played on the unit.
Title (DVD video discs only)
The main film content or accompanying feature content
or additional feature content, or music album.
Each title is assigned a title reference number enabling
you to locate it easily.
Group (DVD audio discs only)
The main audio content or accompanying feature
content or additional feature content, or music album.
Each group is assigned a group reference number
enabling you to locate it easily.
Chapter (DVD video discs only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number,
enabling you to locate the chapter you want. Depending
on the disc, chapters may not be recorded.
Track (DVD audio discs,Video CD
and audio CD only)
Sections of a picture or a musical piece on a video CD
or an audio CD. Each track is assigned a track number,
enabling you to locate the track you want.
Scene
On a video CD with PBC (Playback control) functions,
moving pictures and still pictures are divided into sections called “Scenes”. Each scene is displayed in the
menu screen and assigned a scene number, enabling
you to locate the scene you want.
A scene is composed of one or several tracks.
Types of video CDs
There are two types of video CDs:
Video CDs equipped with PBC (Version 2.0)
PBC (Playback control) functions allow you to interact
with the system via menus, search functions, or other
typical computer-like operations. Moreover, still pictures
of high resolution can be played if they are included in
the disc.
Video CDs not equipped with PBC (Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
1-6
INTRODUCTION
1
DVD video discs
(8 cm / 12 cm disc)
Before Use (Continued)
Precautions
Handling the unit
When shipping the unit
The original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
When setting up the unit
The picture and sound of a nearby TV, VCR, or radio
may be distorted during playback. In this case, position
the unit away from the TV, VCR, or radio, or turn off the
unit after removing the disc.
Storing discs
After playing, store the disc in its case.
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sunlight, as there may be a considerable temperature
increase inside the car.
Cleaning discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from the
center out.
To keep the exterior surfaces clean
Do not use volatile liquids, such as insecticide spray,
near the unit. Do not leave rubber or plastic products in
contact with the unit for a long period of time. They will
leave marks on the surface.
Cleaning the unit
To clean the cabinet
Use a soft, dry cloth. If the surfaces are extremely dirty,
use a soft cloth lightly moistened with a mild detergent
solution. Do not use strong solvents such as alcohol,
benzine, or thinner, as these might damage the surface
of the unit.
To obtain a clear picture
The DVD player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
About Symbols
About the
symbol display
“
” may appear on the TV screen during operation.
This icon means the function explained in this owner’s
manual is not available on that specific DVD video disc.
About the disc symbols for instructions
A section whose title has one of the following symbol is
applicable only to the disc represented by the symbol.
Notes on Discs
DVD-V
DVD-A
Handling discs
VCD2.0
Do not touch the playback side of the disc.
Hold the disc by the edges so that fingerprints will not
get on the surface.
Do not stick paper or tape on the disc.
VCD1.1
CD
MP3
WMA
JPEG
1-7
DVD Video discs
DVD Audio discs
Video CDs with the PBC (playback control)
function.
Video CDs without the PBC (playback control)
function.
Audio CDs.
MP3 disc.
WMA disc.
JPEG disc.
Front Panel and Display Window
N
x
STOP ( )
Stops playback.
1
ON/STANDBY ( @ /
)
Switches the player ON
and OFF.
X
TOP MENU
Displays the discs Title menu,
if available.
PAUSE ( )
Pause playback temporarily/ press repeatedly
for frame-by-frame playback.
MENU
Accesses menu on a DVD disc.
>
Forward SKIP (
)
Go to NEXT chapter/track.
Press and hold for two seconds for
a fast forward search.
.
RETURN
- Removes the setup menu.
Reverse SKIP ( )
- Displays the menu of a
Go to the beginning of the current
video CD with PBC.
chapter/track or press twice in quick
successions to go to PREVIOUS
chapter/track. Press and hold for two
seconds for a fast reverse search.
Disc Tray
Insert a disc here.
Z
OPEN/CLOSE ( )
Opens or closes the disc tray.
b B v V (left/right/up/down)
Selects an item in the menu.
Display window
Shows the current status
of the player.
ENTER
Confirms menu selection.
ANGLE active
DVD
DVD video disc inserted
DVD A
DVD audio disc inserted
Remote Sensor
Point the DVD Player remote control here.
TITLE Indicates current title number
CHP/TRK Indicates current chapter or track number
CD Audio CD inserted
Indicates total playing time/elapsed time
VCD Video CD inserted
MP3 MP3 or WMA disc
inserted
PROG. Programmed playback active
RANDOM RANDOM playback
active
Indicates current player
function:
Playback, Pause, etc.
MP3 VCD
Indicates repeat
mode
CD DVD A
TITLE
CHP/TRK
1-8
PROG.
RANDOM ALL A
B
INTRODUCTION
PLAY (
)
Starts playback.
Power indicator
Lights green when the
DVD player is turned on.
Remote Control
SETUP
Accesses or removes setup menu.
ON/STANDBY
Switches DVD Player ON and OFF.
OPEN/CLOSE
Opens and closes the disc tray.
E.A.M.
Selects sound mode during disc
playback.
0-9 number buttons
Selects numbered items in a menu.
PROGRAM
Enters to the program edit mode or
exits from that.
FL DIM
Controls the Display Window’s light.
CLEAR
Removes a track number on the
program list or a mark on the
MARKER SEARCH menu.
TOP MENU •
Displays the discs Title menu, if
available.
MENU •
Accesses menu on a DVD disc.
MARKER
Marks any point during playback.
RETURN •
- Removes the setup menu.
- Displays the menu of a video CD
with PBC.
DISPLAY
Accesses On-Screen display.
• ANGLE
Selects a DVD camera angle if
available
ZOOM •
Enlarges video image.
N
m
• SUBTITLE
Selects a subtitle language.
PLAY (
)•
Starts playback.
REV (Reverse) (
)•
Search backward.
• AUDIO
Selects an audio language (DVD) or
an audio channel (CD).
FWD (Forward) (
)•
Search forward.
• RANDOM
Plays tracks in random order.
M
t
Forward SLOW ( T ) •
Forward slow playback.
X
Reverse SLOW (
)•
Reverse slow playback.
C
• PAUSE/STEP ( /
)
Pauses playback temporarily/ press
repeatedly for frame-by-frame
playback.
x
• SEARCH
Displays MARKER SEARCH menu.
STOP ( ) •
Stops playback.
>
.
• A-B RPT
Repeat sequence.
Forward SKIP (
)•
Advances to next chapter or track.
• REPEAT
Repeat chapter, track, title, group,
all.
Reverse SKIP (
)•
Returns to beginning of current
chapter or track or press twice in
quick successions to go to previous
chapter or track.
• ENTER
Confirms menu selection.
• b B v V (left/right/up/down)
Selects an item in the menu.
Remote control battery installation
Remote Control Operation Range
Point the remote control at the remote sensor and
press the buttons.
z Distance: About 23 ft (7 m) from the front of the
remote sensor.
z Angle: About 30° in each direction of the front of the
remote sensor.
AAA
Detach the battery cover on the rear of
the remote control, and insert two R03
(size AAA) batteries with
and
aligned correctly.
AAA
Caution
Do not mix old and new batteries. Never mix different
types of batteries (standard, alkaline, etc.).
1-9
COAXIAL (Digital audio out jack)
Connect to digital (coaxial) audio equipment.
AUDIO OUT (Left/Right)
Connect to an amplifier, receiver,
or stereo system.
5.1 CHANNEL AUDIO OUT
Connect to a 5.1 channel receiver
– center speaker connection
– subwoofer connection
– front speakers connections
– rear (surround) speakers connections
VIDEO OUT
Connect to a TV with video inputs.
COMPONENT/PROGRESSIVE SCAN VIDEO OUT (Y Pb Pr)
Connect to a TV with Y Pb Pr inputs.
S-VIDEO OUT
Connect to a TV with S-Video inputs.
OPTICAL (Digital audio out jack)
Connect to digital (optical) audio equipment.
AC Power Cord
Plug into the power source.
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
1-10
INTRODUCTION
Rear Panel
Connections
z
z
z
Tips
Depending on your TV and other equipment you wish
to connect, there are various ways you could connect
the player. Use only one of the connections
described below.
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
best connections.
For better sound reproduction, connect the player’s
AUDIO OUT jacks to the audio in jacks of your
amplifier, receiver, stereo or audio/video equipment.
See “Connecting to Optional Equipment” on page 11.
z
z
1
If your television is a high-definition or “digital ready”
television, you may take advantage of the DVD
Player’s progressive scan output for the highest
video resolution possible.
If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try
Progressive Scan on the DVD Player.
Connect the COMPONENT VIDEO OUT/
PROGRESSIVE SCAN jacks on the DVD Player to
the corresponding in jacks on the TV using the
Y Pb Pr cable (C).
the Left and Right AUDIO OUT jacks of
2 Connect
the DVD Player to the audio left/right in jacks on the
TV (A) using the audio cables.
Caution
– Make sure the DVD Player is connected directly to the
TV. Tune the TV to the correct video input channel.
– Do not connect the DVD Player’s AUDIO OUT jack to
the phono in jack (record deck) of your audio system.
– Do not connect your DVD Player via your VCR. The
DVD image could be distorted by the copy protection
system.
Notes
– Set the Progressive to “On” on the setup menu for
progressive signal, see page 14.
– Progressive scan does not work with the analog video
connections (yellow VIDEO OUT jack) or S-VIDEO
connection.
Connecting to a TV
z
Progressive Scan (ColorStream®Pro) connection
Make one of the following connections, depending on
the capabilities of your existing equipment.
Rear of TV
S-VIDEO
INPUT
Video connection (Good)
the VIDEO OUT jack on the DVD Player to
1 Connect
the video in jack on the TV using the video cable (V).
the Left and Right AUDIO OUT jacks of
2 Connect
the DVD Player to the audio left/right in jacks on the
TV (A) using the audio cables.
R
S-Video connection (Better)
1
S
VIDEO
INPUT
AUDIO INPUT
A
COMPONENT VIDEO /
PROGRESSIVE SCAN INPUT
Pr
L
V
Pb
Y
C
Connect the S-VIDEO OUT jack on the DVD Player
to the S-Video in jack on the TV using the S-Video
cable (S).
the Left and Right AUDIO OUT jacks of
2 Connect
the DVD Player to the audio left/right in jacks on the
TV (A) using the audio cables.
Component Video (ColorStream®) connection (Best)
1
2
Connect the COMPONENT VIDEO OUT/
PROGRESSIVE SCAN jacks on the DVD Player to
the corresponding in jacks on the TV using the
Y Pb Pr cable (C).
Rear of
DVD player
Connect the Left and Right AUDIO OUT jacks of
the DVD Player to the audio left/right in jacks on the
TV (A) using the audio cables.
Note
If the TV has an S-video input, connect the DVD player
with the S-video cable. When using an S-video cable,
do not connect the yellow video cable.
1-11
Connecting to Optional Equipment
Notes
– If the audio format of the digital output does not match
the capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
– Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
– To see the audio format of the current DVD in the onscreen display, press AUDIO.
– Repeated pressing of the AUDIO button may allow
you to select between various audio formats available
on the disc.
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Pro Logic ll/
Pro Logic
Connect the Left and Right AUDIO OUT jacks on the
DVD Player to the audio left and right in jacks on your
amplifier, receiver, or stereo system, using the audio
cables (A).
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby Digital™, MPEG 2, or DTS)
1
Connect one of the DVD Player’s DIGITAL AUDIO
OUT jacks (OPTICAL O or COAXIAL X) to the corresponding in jack on your amplifier. Use an optional digital (optical O or coaxial X) audio cable.
will need to activate the player’s digital output.
2 You
(See “Digital Audio Output” on page 15).
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your DVD Player (MPEG 2,
Dolby Digital™ and DTS). Check the receiver manual
and the logos on the front of the receiver.
Caution:
Due to the DTS Licensing agreement, the digital output
will be in DTS digital out when DTS audio stream is
selected.
Rear of DVD player
Note
This player does not perform internal (2 channel)
decoding of a DTS sound track. To enjoy DTS multi
channel surround, you must connect this player to a
DTS compatible receiver via one of this player’s digital
audio outputs. There will be no output at 6 channel
connectors of this player when DTS is selected.
Analog connection to a multi-channel A/V receiver
with 6 Channel connectors (Dolby Digital)
This DVD Player contains a multi-channel decoder. This
enables playback of DVDs recorded in Multi-channel
Surround without the need for an optional decoder.
1
Connect the CENTER and WOOFER jacks for the
Center speaker and the Subwoofer (C) to the corresponding in jacks on your receiver.
the Left and Right FRONT speaker jacks
2 Connect
(F) to the corresponding in jacks on your receiver.
the Left and Right REAR speaker jacks
3 Connect
(R) to the corresponding in jacks on your receiver.
the appropriate Sound settings for Analog
4 Make
Output and Speaker Settings in the setup menu.
See page 15.
Rear of
DVD player
O
X
F
A
C
Front R
Front L
Center
Rear R
Rear L Subwoofer
ANALOG 5.1CH AUDIO INPUT
OPTICAL
COAXIAL
DIGITAL INPUT
R
R
L
AUDIO INPUT
Amplifier (Receiver)
1-12
Amplifier
(Receiver)
PREPARATION
Connections (Continued)
Before Operation
Temporary Feedback Field Icons
General Explanation
This manual gives basic instructions for operating the
DVD Player. Some DVDs require specific operation or
allow only limited operation during playback. When this
occurs, the symbol
appears on the TV screen, indicating that the operation is not permitted by the DVD
Player or is not available on the disc.
TITLE
General playback status can be displayed on the TV
screen. Some items can be changed on the menu.
GROUP
Repeat Group (DVD audio discs only)
Repeat Track (non-PBC Video CDs and DVD
audio discs only)
ALL
Repeat All Tracks (non-PBC Video CDs only)
A B
Repeat A-B
OFF
Repeat Off
Resume play from this point
On-screen display operation
1 Press DISPLAY during playback.
v/V to select an item.
2 Press
The selected item will be highlighted.
b/B to change the setting of an item.
3 Press
The number buttons can also be used for setting
numbers (e.g., title number). For some functions,
Repeat Chapter
TRACK
On-Screen Display
Repeat Title
CHAPT
Action prohibited or not available
z
z
Notes
Some discs may not provide all of the features on the
on-screen display example shown below.
If no button is pressed for 10 seconds, the on-screen
display disappears.
press ENTER to execute the setting.
DVD-V
Function (Press v/V to select desired item)
Items
1 /3
Shows the current title number and total number of
titles, and skips to the desired title number.
b / B, or
Numbers, ENTER
1 /12
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
b / B, or
Numbers, ENTER
Shows the elapsed playing time, and
searches the point by the elapsed time directly.
Numbers, ENTER
Title Number
Chapter Number
Time search
Audio language
and Digital Audio
Output mode
Subtitle language
Angle
Sound
Selection Method
0:20:09
1 ENG
D
5.1 CH
OFF
1 /1
NORM.
Shows the current audio soundtrack language,
encoding method, and channel number, and
changes the setting.
Shows the current subtitles language, and
changes the setting.
Shows the current angle number and total number of
angles, and changes the angle number.
Shows the current sound mode, and
changes the setting.
1-13
b / B, or
AUDIO
b / B, or
SUBTITLE
b / B, or
ANGLE
b / B, or
E.A.M.
Before Operation (Continued)
DVD-A
Items
4 to select desired item)
Function (Press 3/4
Selection Method
2 /6
Shows the current group number and total number
of groups, and skips to the desired group number.
1 / 2, or
Numbers, SELECT/ENTER
1 /12
Shows the current track number and total number
of tracks, and skips to the desired track number.
1 / 2, or
Numbers, SELECT/ENTER
Group Number
Track Number
Time search
DVD Audio
Output mode
0:10:15
1
PPCM
5 CH
Shows the elapsed playing time.(Display only)
Shows the current encoding method, and channel
number, and changes the setting.
Subtitle language
OFF
Shows the current subtitles language, and
changes the setting.
Page (or Angle)
1 /12
Shows the current page (or angle) number and total number
of pages (or angle), and changes the page (or angle) number.
_
1 / 2, or
AUDIO
1 / 2, or
SUBTITLE
1 / 2, or
ANGLE
or
1 /1
VCD2.0
VCD1.1
Function (Press v/V to select desired item)
Items
Track Number
1 /4
Time
0:20:09
Audio Channel
STER.
Sound
NORM.
Shows the current track number, total number of tracks
and PBC On mode, and skip to the desired track number.
Shows the elapsed playing time (Display only)
Shows the audio channel, and
changes the audio channel.
Shows the current sound mode, and
changes the setting.
1-14
Selection Method
b / B, or
Numbers, ENTER
–
b / B, or
AUDIO
b / B, or
E.A.M.
PREPARATION
On-Screen Display (Continued)
Before Operation (Continued)
Initial Settings
Picture
You can set your own Personal Preferences on the
player.
TV Aspect
DVD-A
4:3 Letterbox: Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars
above and below the picture.
4:3 Panscan: Select when a conventional TV set is
connected. The video material formatted in the Pan &
Scan style is played back in that style (Both sides of the
picture are cut off).
16:9 Wide: Select when a 16:9 wide TV is connected.
Initial Settings General Operation
1
DVD-V
Press SETUP.
The setup menu appears.
Disc Audio
Original
Disc Subtitle
English
Disc Menu
French
Rating
German
Disc Audio
4:3 Letterbox
Area Code
Spanish
Disc Subtitle
4:3 Panscan
TV Aspect
Italian
Disc Menu
16:9 Wide
Menu Language
Chinese
Rating
Progressive Scan
Polish
Area Code
Digital Audio Output
Hungarian
5.1 Speaker Setup
Other — — — —
TV Aspect
Menu Language
Progressive Scan
Others
Digital Audio Output
2
5.1 Speaker Setup
Press v/V to select the desired item.
The screen will show the current setting for the
selected item, as well as alternate setting(s).
Others
B, then
3
4
SETUP, RETURN, or PLAY to exit the
5 Press
setup menu.
While the desired item is selected, press
v/V to select the desired setting.
Press ENTER to confirm your selection.
Some items require additional steps.
Language
Disc Language
DVD-V
Progressive Scan
DVD-V
DVD-A
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the COMPONENT VIDEO OUT/
PROGRESSIVE SCAN jacks, but are connecting the
DVD Player to a standard (analog) television, set
Progressive Scan to Off.
If you are using the Component Video jacks for
connection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.
DVD-A
Disc Audio
Off
Select a language for the disc’s Menu, Audio, and Subtitle.
Disc Subtitle
On
Original : The original language set for the disc is selected.
Other : To select another language, press number buttons to
enter the corresponding 4-digit number according to the language code list on page 29. If you enter the wrong language
code, press CLEAR.
Disc Menu
Rating
Area Code
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
Disc Audio
Original
Disc Subtitle
English
Disc Menu
French
Rating
German
Area Code
Spanish
TV Aspect
Italian
Menu Language
Chinese
Progressive Scan
Polish
Digital Audio Output
Hungarian
5.1 Speaker Setup
Other — — — —
5.1 Speaker Setup
Others
Others
Menu Language
Select a language for the setup menu. This is the menu
you see when you press SETUP.
Disc Audio
English
Disc Subtitle
Spanish
Disc Menu
French
Caution
Once the setting for progressive scan output is entered,
an image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan
to On in error, you must reset the unit. Press STOP to
stop any disc that is playing. Next, press STOP again
and hold it for five seconds before releasing it. The
video output will be restored to the standard setting,
and a picture will once again be visible on a conventional analog TV or monitor.
Rating
Area Code
TV Aspect
Menu Language
1-15
Before Operation (Continued)
Sound
5.1 Speaker settings
Digital Audio Output
Select speaker settings, including volume balance and
delay time, or test the speaker settings.
Speaker settings are only active on the Analog MultiChannel Output. (See “Speaker Settings”, page 27.)
DOLBY DIGITAL/PCM: Select “DOLBY DIGITAL/PCM”
if you connected the DVD Player’s DIGITAL OUT jack to
a Dolby Digital decoder (or an amplifier or other equipment with a Dolby Digital decoder).
Stream/PCM: Select “Stream/PCM” if you connected
the DVD Player’s DIGITAL OUT jack to an amplifier or
other equipment with a DTS decoder, Dolby Digital
decoder or MPEG decoder.
If you like to have DTS sounds from the digital output
jack, you have to select “Stream/PCM”.
Disc Audio
DOLBY
DIGITAL
Disc Subtitle
Stream/PCM
Disc Menu
PCM
TV Aspect
Menu Language
Progressive Scan
Disc Subtitle
Disc Menu
/PCM
Sample Freq.
48 KHz
96KHz
Digital Audio Output
5.1 Speaker Setup
Others
Sample Frequency
To change the Sample Frequency setting, first select
the desired Digital Audio Output as indicated as above.
(1) If your receiver or amplifier is NOT capable of
handling 96KHz signals, loud buzzing sounds might
be heard. In this case, select 48 KHz.
When this choice is made, this unit will automatically
convert any 96KHz signals to 48KHz so your system
can decode them.
(2) If your receiver or amplifier is capable of handling
96KHz signals, select 96KHz. When this choice is
made, this unit will pass each type of signal through
without any further processing.
1-16
R
Rating
Front L
Country Code
Volume
TV Aspect
Menu Language
Size
Progressive Scan
Test
Digital Audio Output
Return
Others
Rating
Area Code
Disc Audio
5.1 Speaker Setup
PCM: Select when connected to a 2-channel digital
stereo amplifier. The DVD player outputs sounds in the
PCM 2ch format when you play a DVD video disc
recorded on the Dolby Digital, MPEG1, or MPEG2
recording system.
DVD-A
Distance
R
0 dB
Large
1 ft
PREPARATION
Each DVD disc has a variety of audio output options.
Set the player’s Digital Audio Output according to the
type of audio system you use.
DVD-V
Before Operation (Continued)
Others
Pluge (Blacker than Black)
The DRC, Vocal, PBC, Auto Play, B.L.E., Pluge and
DNR settings can be changed.
z Press v/V to select the desired item and press
ENTER. The setting of the selected item is changed
between On and Off.
For proper adjustment of your television brightness
settings utilizing a commercially available test disc.
DVD-V
On: Select when you adjust the level of your TV using a
commercially available test disc that contains pluge signals.
Off: For normal use.
DNR (Digital Noise Reduction)
Disc Audio
DRC
On
Disc Subtitle
Vocal
On
Disc Menu
PBC
On
You can reduce ambient noise in the picture.
Rating
Auto Play
Off
Area Code
B.L.E.
On
TV Aspect
Menu Language
Pluge
On
DNR
Off
DNR1: Normal level
DNR2: Expanded level.
Off:
Off.
DVD-V
VCD2.0 VCD1.1
Progressive Scan
Notes
Digital Audio Output
5.1 Speaker Setup
Others
Dynamic Range Control (DRC)
DVD-V
With the DVD format, you can hear a program’s soundtrack in the most accurate and realistic presentation
possible, thanks to digital audio technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the quietest ones). Then, you may listen to a movie
at a lower volume without losing clarity of sound. Set
DRC to On for this effect.
Vocal
– Actual picture enhancement may vary depending on the
quality of the disc.
– While the DNR2 (expanded level) can provide additional
improvement in the reduction of noise in the video signal, it
may produce undesirable picture artifacts on some discs.
Should this occur, select a more appropriate DNR level (normal or off).
– Depending on the disc, some picture detail may be lost by
the picture enhancement.
– A DVD audio disc with Dolby Digital or DTS soundtrack may
be played, some DVD audio discs include moving pictures
which may be modified by the above processes.
DVD-V
Set Vocal to On only when a multi-channel karaoke
DVD is playing. The karaoke channels on the disc will
mix into normal stereo sound.
PBC
VCD2.0
VCD1.1
Set Playback Control (PBC) to On or Off.
On: Video CDs with PBC are played according to the PBC.
Off: Video CDs with PBC are played the same way as Audio CDs.
Auto Play
DVD-V
You can set up the DVD Player so a DVD disc automatically starts playing whenever the DVD is inserted.
If Auto Play mode is set to On, this DVD player will
search a title where playback time is longest and then
play back the title automatically.
On: Auto Play function is activated.
Off: Auto Play function is not activated.
Note
The Auto Play function may not work for some DVDs.
B.L.E. (Black Level Expansion)
DVD-V
VCD2.0
VCD1.1
To select the black level of playback pictures. Set your
preference and monitor’s ability.
On: Expanded grey scale. (0 IRE cut off)
Off: Standard grey scale. (7.5 IRE cut off)
1-17
Before Operation (Continued)
Parental Control
Area Code
Rating
Enter the code of a country/area whose standards were
used to rate the DVD video disc, referring to the list
(See “Area Code List”, page 30.).
Movies on DVDs may contain scenes not suitable for
children. Therefore, discs may contain Parental Control
information that applies to the complete disc or to
certain scenes on the disc. These scenes are rated
from 1 to 8, and alternatively, more suitable scenes are
available for selection on some discs. Ratings are
country-dependent. The Parental Control feature allows
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
Disc Audio
Disc Subtitle
Code Set
U S
Disc Menu
Rating
Area Code
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Disc Audio
8
Disc Subtitle
7
Disc Menu
6
Rating
Area Code
5
TV Aspect
Menu Language
3
Progressive Scan
1
Digital Audio Output
Unlock
5.1 Speaker Setup
Change
Others
Select Area Code using the v/V buttons on the
1 setup
menu.
2 While Area Code is selected, press B.
3 Follow step 3 of “Rating” on left.
4 Select the first character using the v/V buttons.
Shift the cursor using B button and select the
5 second
character using v/V buttons.
Press ENTER to confirm your area code selec6 tion, then press SETUP to exit the menu.
4
2
Others
“Rating” on the Setup menu using the
1 Select
v/V buttons.
2 While “Rating” is selected, press B.
you have not entered a password yet.
3 When
Enter a 4-digit password using the numbered buttons to create a personal 4-digit security password.
Note
Confirmation of the 4-digit password is necessary when
the code is changed (see “Changing the 4-digit code”
below.).
then press ENTER. Enter the 4-digit password
again and press ENTER to verify.
When you have already entered a password;
Enter a 4-digit password using the numbered buttons to confirm the personal 4-digit security password, then press ENTER.
Changing the 4-digit code
If you make a mistake before pressing ENTER, press
CLEAR and enter 4-digit security password again.
a rating from 1 to 8 using the v/V but4 Select
tons.
Level 1: DVD software for adults cannot be
played back.
Level 8: All DVD software can be played back.
Unlock: If you select Unlock, Parental Control is
not active. The disc will play in full.
Ratings 1 to 8: Some discs contain scenes not
suitable for children. If you set a rating for the player, all disc scenes with the same rating or lower will
be played. Higher rated scenes will not be played
unless an alternative scene is available on the disc.
The alternative must have the same rating or a
lower one. If no suitable alternative is found, playback will stop. You must enter the 4-digit password
or change the rating level in order to play the disc.
1 Follow Steps 1-2 as shown above to the left (Rating).
2 Enter the old code, then press ENTER.
3 Select Change using v/V buttons then press
ENTER.
4 Enter the new 4-digit code, then press ENTER.
5 Enter exactly the same code a second time and verify by pressing ENTER.
6 Press SETUP to exit the menu.
If you forget your 4-digit code
If you forget your password, to clear the current password, follow the procedure below.
1 Press SETUP to display the setup menu.
2 Use the Number buttons to enter the 6-digit number
“210499”.
The 4-digit password is cleared. “P CLr” appears on the
display for a moment.
3 Enter a new code as shown above to the left (Rating).
ENTER to confirm your rating selection,
5 Press
then press SETUP to exit the menu.
1-18
PREPARATION
DVD-V
DVD-V
Operation with DVD and Video CD
Playing a DVD and Video CD
Playback Setup
z
z
DVD-V
DVD-A
VCD2.0
General Features
VCD1.1
Turn on the TV and select the video input source connected to the DVD player.
Audio system: Turn on the audio system and select
the input source connected to the DVD player.
1
your chosen disc in the tray, with the
2 Load
playback side down.
OPEN/CLOSE to close the tray.
3 Press
READING appears on the TV screen, and playback
starts automatically. If playback does not start,
Note
Unless stated otherwise, all operations described use
the remote control. Some features may also be
available on the Setup menu.
Moving to another TITLE/GROUP
Press OPEN/CLOSE to open the disc tray.
press PLAY.
In some cases, the disc menu might appear
instead.
DVD-V
Moving to another CHAPTER/TRACK
DVD-V
Use the b B v V buttons to select the title/chapter you
want to view, then press ENTER to start playback.
Press TOP MENU or MENU to return to the menu
screen.
DVD-A
Use the 1 2 3 4 buttons to select an option you
want, then press SELECT/ENTER to view the option.
1 /12
z
VCD2.0
1 /12
When a title on a disc has more than one chapter or a
disc has more than one track, you can move to another
chapter/track as follows:
z Press SKIP
or
briefly during
playback to select the next chapter/track or to return
to the beginning of the current chapter/track.
z Press SKIP
twice in quick successions to step
back to the previous chapter/track.
z To go directly to any chapter/track during DVD playback, press DISPLAY. Then, press v/V to select the
chapter/track icon. Then, enter the chapter/track
number using the numbered buttons (0-9).
.>
.
Note
For two-digit numbers, press the numbered buttons
(0-9) in rapid succession.
VCD2.0
z
VCD1.1
DVD-A
1 /12
If a menu screen is displayed
2 /6
When a disc has more than one title/group, you can
move to another title/group as follows:
z Press DISPLAY, then press the appropriate numbered button (0-9) to select a title/group number.
DVD-V
The menu screen may be displayed first after loading a
DVD or Video CD which offer a menu.
1 /3
DVD-A
Use the number buttons to select the track you want
to view.
Press RETURN to return to the menu screen.
Menu setting and the exact operating procedures for
using the menu may differ depending on the disc.
Follow the instructions on each menu screen.
You also may set PBC to Off under setup. See page
16.
Search
m M
mm m
M m m
M M M M
DVD-V
1 Press REV
DVD-A
or FWD
VCD2.0
VCD1.1
during playback.
The player will now go into SEARCH mode.
Notes
– If Parental Control is set and the disc is not within the
Rating settings (not authorized), the 4-digit code must
be entered and/or the disc must be authorized (see
“Parental Control”, on page 17).
– DVDs may have a region code.
Your player will not play discs that have a region code
different from your player. The region code for this
player is 1 (one).
2 Press REV
or FWD
repeatedly to select the
X2,
X4,
X16,
X100
required speed:
X2,
X4,
X16,
X100
(backward) or
(forward).
X2,
With a Video CD, the Search speed changes:
X4,
X8, (backward) or
X2,
X4,
X8,
(forward).
3 To exit SEARCH mode, press PLAY.
m m
M M Mm
Note
When using a DVD audio disc that includes pictures,
this operation may be permitted in some picture
segments.
Pause
DVD-V
DVD-A
VCD2.0
VCD1.1
1 Press PAUSE/STEP during playback.
2 To return to playback, press PLAY.
1-19
Operation with DVD and Video CD
3 To cancel the sequence, press A-B RPT.
General Features (continued)
Still Picture and Frame-by-frame playback
VCD2.0
DVD-A
VCD1.1
1 Press PAUSE/STEP during playback.
The player will now go into PAUSE mode.
2 You can advance the picture frame-by-frame by
pressing PAUSE/STEP repeatedly on the remote control.
Note
When using a DVD audio disc that includes pictures, this
operation may be permitted in some picture segments.
Slow Motion
DVD-V
DVD-A
VCD2.0
VCD1.1
t or T during playback.
2 Use the SLOW t or T to select the required speed:
t 1/16, t 1/8, t 1/4 or t 1/2 (backward), or
1/16, T 1/8, T 1/4 or T 1/2 (forward).
T
3 To exit slow motion mode, press PLAY.
1 Press SLOW
The player will enter SLOW mode.
z
z
Notes
Slow motion playback in reverse is not applicable for
Video CD.
When using a DVD audio disc that includes pictures, this
operation may be permitted in some picture segments.
Random
Karaoke DVD
VCD2.0
VCD1.1
1 Press RANDOM during playback or in stop mode.
The unit automatically begins Random Playback and
“RANDOM” appears on the display window.
2 To return to normal playback, press RANDOM until
“RANDOM” disappears on the display window.
>
Tip
By pressing SKIP
during Random playback, the
unit selects another title (track) and resumes Random
playback.
z
z
Notes
This function only works with DVD Karaoke discs and
video CD without PBC.
On a Video CD with PBC, you must set PBC to Off on
the setup menu to use the Random function. See
page 16.
Repeat A-B
A *
A B
DVD-V
DVD-A
VCD2.0
VCD1.1
OFF
To repeat a sequence in a title or group:
1 Press A-B RPT at your desired starting point.
“ A * ” appears briefly on the TV screen.
2 Press A-B RPT again at your desired end point.
“A B” appears briefly on the TV screen, and the repeat
sequence begins (“AsB” appears on the display window).
1-20
OPERATION
DVD-V
Operation with DVD and Video CD
2 Press b /B to select the Marker number that you
want to erase.
3 Press CLEAR.
General Features (continued)
Selecting the sound enhancement
DVD-V
VCD2.0
NORM.
VCD1.1
3D SUR
The Marker number will be erased from the list.
4 Repeat steps 2 and 3 to erase additional Marker
numbers.
5 To remove the MARKER SEARCH menu, press
SEARCH.
DIALOGUE
Press E.A.M. to select the sound enhancement during
playback.
Special DVD Features
NORM. : Normal sound
3D SUR: This player can produce a 3D Surround effect, which
simulates multi-channel audio playback from two conventional
stereo speakers, instead of the five or more speakers normally
required to listen to multi-channel audio from a home theater
system.
DIALOGUE: Enhances critical center channel information to
make dialogue more intelligible (only when playing a DVD
video disc recorded on the Dolby Digital recording system).
• To use this enhancement on audio output from the
DIGITAL AUDIO OUT jack, be sure to set “Digital Audio
Zoom
DVD-A
VCD2.0
DVDs may offer menus that allow you to access special
features. To use the disc menu, press MENU. Then,
press the appropriate number button to select an option.
Or, use the b BvV buttons to highlight your selection,
then press ENTER.
Title Menu
VCD1.1
Note
The zoom function may not work for some DVD-V
and DVD-A.
Marker Search
1/9
DVD-V
VCD2.0
VCD1.1
MARKER SEARCH
You can start playback from a memorized point. Up to
nine points can be memorized.
To enter a mark, follow these steps.
1 During disc playback, press MARKER when
playback reaches the spot that you want to
memorize.
The Marker icon will appear on the TV screen briefly.
2 Repeat step 1 to enter up to nine Marker points on a
disc.
To Recall a Marked Scene
1 During disc playback, press SEARCH.
The MARKER SEARCH menu will appear on the screen.
2 Within 10 seconds, press b/B to select a Marker
number that you want to recall.
3 Press ENTER.
Playback will start from the Marked scene.
4 To remove the MARKER SEARCH menu, press
SEARCH.
To clear a Marked Scene
1 During disc playback, press SEARCH.
The MARKER SEARCH menu will appear on the screen.
DVD-A
If the current title has a menu, the menu will appear on the
screen. Otherwise, the disc menu may appear.
2 The menu can list camera angles, spoken language
and subtitle options, and chapters for the title.
3 To remove the title menu, press TOP MENU again.
2 Use the b BvV buttons to move through the zoomed
picture.
3 Press CLEAR to resume normal playback or return to
the paused image.
z
DVD-V
1 Press TOP MENU.
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1 Press ZOOM during playback or still playback to activate the Zoom function.
If you press ZOOM repeatedly, the magnification level
increases up to six steps.
DVD-A
Checking the contents of DVD Video
discs: Menus
Output” to “PCM”. See page 15.
DVD-V
DVD-V
Disc Menu
DVD-V
DVD-A
1 Press MENU.
The disc menu is displayed.
2 To remove the disc menu, press MENU again.
Camera Angle
DVD-V
DVD-A
1 /1
If the disc contains scenes recorded at different camera
angles, you can change to a different camera angle
during playback.
z Press ANGLE repeatedly during playback to select a
desired angle.
The number of the current angle appears on the display.
Changing the Audio Language
DVD-V
DVD-A
1
PPCM
5.1 CH
1 ENG
D
5.1 CH
Press AUDIO repeatedly during playback to hear a different audio language or audio track.
Changing the Audio Channel
VCD2.0
STER.
VCD1.1
LEFT
RIGHT
Press AUDIO repeatedly during playback to hear a different audio channel (STER., LEFT or RIGHT).
Subtitles
DVD-V
DVD-A
1 ENG
Press SUBTITLE repeatedly during playback to see the
different subtitle languages.
If
1-21
Note
appears, the feature is not available on the disc.
Operation with DVD and Video CD
DVD-A
Viewing another PAGE
DVD Audio is a new disc format building on the success
of DVD to provide high quality, uncompressed, multichannel audio for a new experience in audio quality. A
DVD Audio disc can be identified by the DVD audio logo
on the disc jacket or on the disc itself.
DVD Audio can provide higher quality stereo than Audio
CDs with a sampling rate of up to 192kHz (compared to
44.1kHz for CDs). DVD Audio digital sound can be
delivered with up to 24 bits of data (compared to 16 bits
for a standard CD).
A typical DVD Audio disc contains up to seven times the
data capacity of a CD. This additional space is used for
music, either Advanced Resolution multi-channel sound
quality that is closer to the artist’s master recording or
for longer recordings. Many DVD Audio discs contain
on-screen text, such as artist biographies, playlists, or
lyrics. Some DVD Audio discs contain photo galleries or
video clips.
DVD-A
1 /12
Since DVD Audio discs can hold a lot of content, there
are various ways to see what’s available on the disc.
1 Press DISPLAY during playback.
4 to select Page icon.
2 Press 3/4
3 Press 1/2 to select a page number.
What appears on the screen will vary from disc to disc
because the information available depends upon the way the
disc was created.
Note
Since the authoring of DVD Audio Discs varies, some of
the on-screen display choices might not be available for
the disc you’re playing.
Note
To enjoy maximum sound quality and surround effect of
DVD Audio, you must use 5.1 channel analog audio output
(5.1CH AUDIO OUT jacks on the DVD Player). If you use
the DIGITAL OUT (OPTICAL or COAXIAL) for your audio
connection, the sound will only be similar to CD-quality
sound even though you’re playing a DVD Audio disc and
might not have sorround effect.
Moving to another GROUP
DVD-A
2 /6
Some DVD Audio discs divide content into different
groups. Your player enables you to quickly access
different groups during playback via the on-screen
display.
1 Press DISPLAY during playback on in stop mode.
4 to select Group icon.
2 Press 3/4
3 Press 1/2 or the numbered buttons (0-9) to select a
group number.
Note
Sometimes the author of the disc creates hidden content that can only be accessed by entering a password.
If the lock icon appears on the TV screen, enter the
password (sometimes you’ll find it on the disc’s jacket
cover or on a web site). This password control isn’t dictated by your DVD Player — it is a function of the disc.
Since the authoring of DVD Audio Discs varies, some of
the on-screen display choices might not be available for
the disc you’re playing.
1-22
OPERATION
DVD Audio Discs
Operation with Audio CD and MP3/WMA Disc
Notes on MP3/WMA Recordings
Playing an Audio CD and MP3/WMA Disc
CD
MP3
About MP3
WMA
z
The DVD Player can play MP3/WMA formatted recordings on CD-ROM, CD-R or CD-RW discs.
Before playing MP3/WMA recordings, read the notes on
MP3/WMA Recordings on right.
1
Insert a disc and close the tray.
Audio CD; Audio CD menu appears on the TV
screen go to step 4.
MP3/WMA disc; The MP3/WMA-JPEG choice
menu appears on the TV screen. Go to step 2
z
About WMA(Window Media Audio)
z
z
MP3 WMA
JPEG
Press RETURN to move to the MP3/WMA-JPEG
choice menu.
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
Program
1.mp3
2.mp3
3.mp3
4.mp3
5.mp3
6.mp3
7.mp3
8.mp3
00:00
Clear All
1
OFF
v/V to select a folder, and ENTER.
3 Press
A list of files in the folder appears.
v/V to select a track then press PLAY or
4 Press
ENTER.
Playback starts.
During playback, the current track’s elapsed playing
time will appear on the display window and menu.
Playback will stop at the end of the disc.
Press TOP MENU to move to the next page.
Press MENU to move to the previous page.
Program
CD
TRACK01
TRACK02
TRACK03
TRACK04
TRACK05
TRACK06
TRACK07
Clear All
TRACK08
0: 56: 18
STER.
NORM.
Audio CD menu
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
1.mp3
2.mp3
3.mp3
4.mp3
5.mp3
6.mp3
7.mp3
8.mp3
00:00
Clear All
1
1. Sampling Frequency / only at 44.1kHz (MP3),
22.05 - 44.1kHz (WMA)
2. Bit rate / within 32 - 320kbps (MP3),
32 - 128kbps (WMA)
3. CD-R physical format should be “ISO 9660”
4. If you record MP3/WMA files using the software
which cannot create a FILE SYSTEM, for example
“Direct-CD” etc., it is impossible to playback
MP3/WMA files. We recommend that you use “Easy
CD Creator”, which creates an ISO9660 file system.
5. A single session disc requires MP3/WMA files in the
first track. If there is no MP3/WMA file in the 1st
track, it cannot playback MP3/WMA files. If you wish
to playback MP3/WMA files, format all the data in
the disc or use a new one.
6. File names should be named using 8 letters or less
and must incorporate “.mp3” or “.wma” extension
e.g. “********.MP3” or “********.WMA”.
7. Do not use special letters such as “/ : * ? “ < > ” etc.
8. Total number of files on the disc should be less than
650.
This DVD player requires discs/recordings to meet
certain technical standards in order to achieve optimal
playback quality. Pre-recorded DVDs are automatically
set to these standards. There are many different types
of recordable disc formats (including CD-R containing
MP3 or WMA files). That require certain pre-existing
conditions (see above) to insure compatible playback.
Program
MP3 WMA
An WMA file is a Microsoft audio compression
technology.
WMA(Windows Media Audio) offers double the audio
compression of the MP3 format.
MP3/WMA Disc compatibility with this player is
limited as follows:
v/V to select the MP3/WMA then press
2 Press
ENTER.
The MP3/WMA menu appears on the TV screen.
MP3 WMA
An MP3 file is audio data compressed by using the
MPEG1 audio layer-3 file-coding scheme. We call
files that have the “.mp3” file extension “MP3 files”.
The player can not read an MP3 file that has a file
extension other than “.mp3”.
OFF
Customers should also note that permission is
required in order to download MP3/WMA files and
music from the Internet. Our company has no right
to grant such permission. Permission should
always be sought from the copyright owner.
MP3/WMA menu
Tips
If you are in a file list and want to return to the Folder
list, use the vV to highlight
and press ENTER to
return to the previous menu screen.
5 To stop playback at any other time, press STOP.
1-23
Microsoft, Windows Media, and the
Windows Logo are trademarks or
registered trademarks of Microsoft
Corporation in both the United States
and other countries
Operation with Audio CD and MP3/WMA Disc (Continued)
CD
MP3
Repeat A-B
WMA
1 Press PAUSE/STEP during playback.
CD
2 To return to playback, press PLAY or press
PAUSE/STEP again.
To repeat a sequence.
1 During disc playback, press A-B RPT at your desired
starting point.
Moving to another Track
2 Press A-B RPT again at your desired end point.
The Repeat icon and “A * ” appears on the menu screen.
WMA
CD
MP3
>.
.
The Repeat icon and “A B” appears on the menu screen,
and the sequence begins to play repeatedly.
Press SKIP
or
briefly during
playback to go to the next track or to return to the
beginning of the current track.
3 To exit the sequence and return to normal play, press
A-B RPT again.
z
Press SKIP
twice in quick successions to step
back to the previous track.
Selecting the sound enhancement
z
In case of audio CD, to go directly to any track, enter
the track number using the numbered buttons (0-9)
during playback.
z
Repeat Track/All/Off
CD
MP3
The Repeat icon and “OFF” appears on the menu screen.
CD
This unit can produce a 3D Surround effect, which
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five or
more speakers normally required to listen to multichannel audio from a home theater system.
WMA
1 To repeat the track currently playing, press REPEAT.
1 Press E.A.M. to select “3D SUR” during playback.
The Repeat icon and “TRACK” appears on the menu
screen.
2 To turn off the 3D Surround effect, press E.A.M. again
to select “NORM.”.
2 To repeat all tracks on a disc, press REPEAT a second time.
The Repeat icon and “ALL” appears on the menu screen.
Changing the Audio Channel
3 To cancel Repeat mode, press REPEAT a third time.
Press AUDIO repeatedly during playback to hear a
different audio channel (STER., LEFT, or RIGHT).
The Repeat icon and “OFF” appears on the menu screen.
m M
mm m
M m
M M M
Search
CD
1 Press REV
MP3
or FWD
WMA
during playback.
The player will now go into SEARCH mode.
2 Press REV
or FWD
repeatedly to select the
X2,
X4,
X8 (backward) or
required speed:
X2,
X4,
X8 (forward).
Search speed and direction are indicated on the menu
screen.
3 To exit SEARCH mode, press PLAY.
Random
CD
MP3
CD
WMA
1 Press RANDOM during playback or when playback is
stopped.
The unit automatically begins Random Playback and
RANDOM or “RAND.” appears on the display window
and menu screen.
2 To return to normal playback, press RANDOM repeatedly until RANDOM or “RAND.” disappears on the
display window and menu screen.
1-24
OPERATION
Pause
Operation with JPEG Disc
Viewing a JPEG disc
.>
Moving to another File
JPEG
Press SKIP
or
once during viewing a picture
to advance to the next file or to the previous file.
This DVD Player can play discs with JPEG files. Before
playing JPEG recordings, read the notes on JPEG
Recordings on right.
1
Still Picture
1 Press PAUSE/STEP during slide show.
The player will now go into PAUSE mode.
2 To return to the slide show, press PLAY or press
PAUSE/STEP again.
Insert a disc and close the tray.
The MP3/WMA-JPEG choice menu appears on the
TV screen.
MP3 WMA
To flip the picture
JPEG
Press v/V during showing a picture to flip the
picture horizontally or a vertically.
v/V to select the JPEG then press
2 Press
ENTER.
The JPEG menu appears on the TV screen.
To rotate picture
Press b /B during showing a picture to rotate the
picture clockwise or counter clockwise.
JPEG
Folder1
Folder2
Folder3
Folder4
Folder5
Notes on JPEG Recordings
Folder6
Folder7
Folder8
z
Depending upon the size and number of the JPEG
files, it could take a long time for the DVD player to
read the disc’s contents. If you don’t see an onscreen display after several minutes, some of the files
are too big — reduce the resolution of the JPEG files
to less than 2 mega pixels and burn another disc.
z
Total number of files and folders on the disc should
be less than 650.
z
Some disc may be incompatible due to different
recording format or condition of disc.
z
If you want to view a particular file, press v/V to
4 highlight
a file and press ENTER or PLAY.
Viewing the file proceeding starts.
When you are using software such as “Easy CD
Creator” to burn the jpeg files into the CD-R, ensure
that all the selected files have the “.jpg” extensions
when copying into the CD layout.
z
During viewing a file, press RETURN to move to
the previous menu (JPEG menu).
If the files have “.jpe” or “.jpeg” extensions, please
rename them as “.jpg” files.
z
File names without “.jpg” extension will not be able to
be read by this DVD player. Even though the files are
shown as JPEG image files in windows explorer.
Slide Speed
Off
v/V to select a folder, and ENTER.
3 Press
A list of files in the folder appears.
Press RETURN to move to the MP3/WMA-JPEG
choice menu.
Tip
If you are in a file list and want to return to the Folder
list, use the vV buttons on the remote to highlight
“
” and press ENTER to return to the previous menu
screen.
Press TOP MENU to move to the next page.
Press MENU to move to the previous page.
JPEG
Folder1
Picture1.jpg
Picture2.jpg
Picture3.jpg
Picture4.jpg
Picture5.jpg
Picture6.jpg
Picture7.jpg
5/32
1024X768
Slide Speed
Off
5/32
1024X768
Picture5.jpg
Tip
There are three viewing Slide Speed options: Fast,
Normal, Slow, and Off. Press b /B to highlight the Slide
Speed then press v/V to select the option you want to
use, and press ENTER.
viewing at any other time, press STOP.
5 ToThestop
JPEG menu appears.
1-25
VCD2.0
CD
VCD1.1
Programmed Playback with Audio CD
and MP3/WMA Disc
WMA
Programmed Playback with Video CD
The Program function enables you to store your favorite
tracks from any disc in the player memory.
Program can contain 30 tracks.
1
MP3
Press PROGRAM during playback or in the stop
mode to enter the Program Edit mode.
Note
On a Video CD with PBC, you must set PBC to Off on the
setup menu to use the Program function. See page 16.
1 Insert Video CD and close the tray.
2 Press PROGRAM while playback is stopped.
The VCD Program menu will appear.
The E mark will appear to the right of the word Program
on the right side of the menu screen.
VCD
Program
E
TRACK 1
TRACK 2
Note
Press PROGRAM to exit the Program Edit mode;
the E mark will disappear.
TRACK 3
TRACK 4
TRACK 5
TRACK 6
TRACK 7
TRACK 8
a track, then press ENTER to place the
2 Select
selected track on the Program list.
step 2 to place additional tracks on the
3 Repeat
Program list.
Program
CD
TRACK 1
TRACK 12
TRACK 2
TRACK 8
TRACK 3
TRACK 10
TRACK 4
TRACK 3
E
TRACK 5
TRACK 6
TRACK 7
Clear All
TRACK 8
0: 56: 18
STER.
NORM.
Audio CD menu
Program
MP3 WMA
Note
Press RETURN or PROGRAM to exit the Program menu.
steps 2-6 of “Programmed Playback with
3 Follow
Audio CD and MP3/WMA disc” on left.
resume normal playback from programmed
4 Toplayback,
press PROGRAM.
E
TRACK 8.mp3
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
1.mp3
2.mp3
3.mp3
4.mp3
5.mp3
6.mp3
7.mp3
8.mp3
00:00
TRACK 2.mp3
TRACK 4.mp3
TRACK 3.mp3
Clear All
3
“PROG.” indicator disappears in the display window.
OFF
Repeat Programmed Tracks
MP3/WMA menu
B.
4
Press
5
Press v/V to select the track you want to start
playing.
z
z
To repeat all tracks on the program list, press
REPEAT a second time.
The Repeat icon and “ALL” appears on the menu screen.
z
Press TOP MENU to move to the next page.
Press MENU to move to the previous page.
To cancel Repeat mode, press REPEAT a third time.
The Repeat icon and “OFF” appears on the menu screen.
Playback begins in the order in which you programmed
the tracks and “PROG.” appears on both the menu screen
and display window.
Playback stops after all of the tracks on the Program list
have played once.
To resume normal playback from programmed
playback, press PROGRAM. Select a track of CD
(or MP3/WMA) list and then press ENTER.
“PROG.” indicator disappears from the menu screen and
display window.
To repeat the track currently playing, press REPEAT.
The Repeat icon and “TRACK” appears on the menu
screen.
The programmed track you selected last is highlighted on
the program list.
6 Press PLAY to start.
7
Clear All
Erasing a Track from Program List
1 Press PROGRAM during playback (Audio CD and
MP3/WMA disc only) or in the stop mode to enter the
Program Edit mode.
The
E
mark will appear.
2 Press B to move to the Program list.
3 Use v/V to select the track that you wish to erase
from the Program list.
4 Press CLEAR.
The track will be erased from the Program list.
Erasing the Complete Program List
1 Follow steps 1-2 of “Erasing a Track from Program
List” as above.
2 Use v/V to select “Clear All”, then press ENTER.
The complete Program for the disc will be erased.
The programs are also cleared when the disc is removed.
1-26
OPERATION
Programmed Playback
Additional Information
Screen Saver
Video Mode Setting
The screen saver picture appears when you leave the
DVD Player in stop mode for about five minutes.
After the Screen Saver has been engaged for about five
minutes, the DVD Player will automatically turn itself off.
DVD-V
VCD2.0
VCD1.1
z
With certain discs, the playback picture may be flickering or Dot Crawl is shown on straight lines. That
means Vertical interpolation or De-interlace is not
perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
video mode.
z
To change the video mode, press and hold
DISPLAY about 3 seconds during disc playback. The
new video mode number selected is displayed on the
TV screen. Check whether the video quality has
improved. If not, repeat the above procedure until picture quality is improved.
z
Video mode sequence:
Auto → Film → Video → Auto
If you turn off the power, the video mode will return to
initial default state (Auto).
Dimmer Function
You can adjust the Display Window’s brightness in
3 steps. Each press of the FL DIM button modifies the
Display Window’s brightness in the following order:
DVD-A
Normal → Dim → Display Off → Normal
z
Detailed Description of each Video Mode
Auto : The source material of the DVD video (film material or
video material) is determined from disc information.
Film : Suitable for playing film based content or video based
material recorded by the progressive scan method.
Video : Suitable for playing video based content with
comparatively little motion.
Note
The video mode setting only works when the
Progressive Scan mode is set to “On” on the setup
menu.
1-27
Speaker Settings
Make the following settings for the built-in 5.1 channel
surround decoder.
If you connected speakers to your DVD Player, setting
the Distance lets the speakers know how far the sound
has to travel to reach your set listening point. This
allows the sound from each speaker to reach the listener at the same time. (1 ft = 30.48 cm)
Disc Audio
Disc Subtitle
Disc Menu
R
Rating
Front L
Country Code
Volume
TV Aspect
Menu Language
Size
Progressive Scan
Test
Digital Audio Output
Return
Distance
R
0 dB
Large
1 ft
Note
You can not set the distance of subwoofer speaker.
5.1 Speaker Setup
Others
Test
4 butSelect “5.1 Speaker Setup” using the 3/4
1 tons
on the setup menu.
“5.1 Speaker Setup” is selected, press 2
2 While
button.
3 Press 1/22 buttons to select the desired speaker.
4 Adjust options by using 3 41 2 buttons.
Press SELECT/ENTER to test the signals of each
speaker. Adjust the volume to match the volume of test
signals memorized in the system.
z Front Left (L) → Center → Front Right (R)
→ Rear Right (R) → Rear Left (L)
Return
Press SELECT/ENTER to return to the previous menu.
Speaker selection
Select a speaker that you want to adjust. (Front speakers (Left), Front speakers (Right), Center Speaker, Rear
speakers (Left), Rear speakers (Right), or Subwoofer)
Note
Certain speaker settings are prohibited by the Dolby
Digital licensing agreement.
Volume
Press 1 / 2 to adjust the output level of the selected
speaker. (-10dB - 0dB)
Size
z
z
Press 1 / 2 to set a mode. (Large, Small or None)
If you have connected the system to a speaker with
a low frequency of 100Hz or below, select “Large.”
z
If you have connected the system to a speaker without a low frequency of 100Hz or below, select
“Small.” If you have not connected a subwoofer,
always select “Large” for Front speaker (L/R).
z
When you do not have a certain speaker connected,
select “None.”
z
Front L/R speaker’s size can be set to “Large” or
“Small.”
z
If Front L/R speaker’s size is set to “Small,” Rear and
Center speaker’s size can be set to “Small” or
“None.”
z
Subwoofer’s size can be set only to “Large” or
“None”.
1-28
OPERATION
Distance
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Cause
Symptom
Correction
No power.
z
The power cord is disconnected.
z
Plug the power cord into the wall outlet
securely.
The power is on, but
the DVD player does
not work.
z
No disc is inserted.
z
Insert a disc. (Check that the DVD or,
audio CD indicator in the display
window is lit.)
No picture.
z
The TV is not set to receive DVD signal
output.
z
Select the appropriate video input mode
on the TV so the picture from the DVD
player appears on the TV screen.
z
The video cable is not connected
securely.
z
Connect the video cable securely.
z
The connected TV power is turned off.
z
Turn on the TV.
z
The equipment connected with the
audio cable is not set to receive DVD
signal output.
z
Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD player.
z
The audio cables are not connected
securely.
z
Connect the audio cable securely.
z
The power of the equipment connected
with the audio cable is turned off.
z
Turn on the equipment connected with
the audio cable.
z
The Digital Audio Output is set to the
wrong selection.
z
Press Setup on the remote control.
Move the cursor down to Digital Audio
Output. Press the right cursor. Select
the correct output desired. Press
ENTER. To get DTS sounds, “Bit
Stream/PCM” has to be selected. And
use the Digital Output or Optical Out
jack. Note that there will be no outputs
at 6 ch analog outputs of this set for
DTS selection. Next select the appropriate sampling frequency.
If your equipment cannot receive 98
KHz, please select 48 KHz or else
buzzing sounds will be heard.
The playback picture is
poor.
z
The disc is dirty.
z
Clean the disc.
The DVD player does
not start playback.
z
No disc is inserted.
z
Insert a disc. (Check that the DVD, or
audio CD indicator in the DVD display is lit.)
z
An unplayable disc is inserted.
z
Insert a playable disc. (Check the disc
type, color system, and Regional code.)
z
The disc is placed upside down.
z
Place the disc with the playback side
down.
z
The disc is not placed within the guide.
z
Place the disc on the disc tray correctly
inside the guide.
z
The disc is dirty.
z
Clean the disc.
z
The Rating level is set.
z
Cancel the Rating function or change
the rating level.
z
The remote control is not pointed at the
remote sensor of the DVD player.
z
Point the remote control at the remote
sensor of the DVD player.
z
The remote control is too far from the
DVD player.
z
Operate the remote control within 23 ft
(7 m).
z
There is an obstacle in the path of the
remote control and the DVD player.
z
Remove the obstacle.
z
The batteries in the remote control are
exhausted.
z
Replace the batteries with new ones.
No sound./Buzzing
sounds.
The remote control
does not work properly.
1-29
Language Code List
Code
Language
Code
Language
Code
Language
Code
Language
6566
Abkhazian
7074
Fiji
7678
Lingala
8373
Singhalese
6565
Afar
7073
Finnish
7684
Lithuanian
8375
Slovak
6570
Afrikaans
7082
French
7775
Macedonian
8376
Slovenian
8381
Albanian
7089
Frisian
7771
Malagasy
8379
Somali
6577
Ameharic
7176
Galician
7783
Malay
6983
Spanish
6582
Arabic
7565
Georgian
7776
Malayalam
8385
Sudanese
7289
Armenian
6869
German
7784
Maltese
8387
Swahili
6583
Assamese
6976
Greek
7773
Maori
8386
Swedish
6588
Aymara
7576
Greenlandic
7782
Marathi
8476
Tagalog
6590
Azerbaijani
7178
Guarani
7779
Moldavian
8471
Tajik
6665
Bashkir
7185
Gujarati
7778
Mongolian
8465
Tamil
6985
Basque
7265
Hausa
7865
Nauru
8484
Tatar
6678
Bengali; Bangla
7387
Hebrew
7869
Nepali
8469
Telugu
6890
Bhutani
7273
Hindi
7879
Norwegian
8472
Thai
6672
Bihari
7285
Hungarian
7982
Oriya
6679
Tibetan
6682
Breton
7383
Icelandic
8065
Panjabi
8473
Tigrinya
6671
Bulgarian
7378
Indonesian
8083
Pashto, Pushto
8479
Tonga
7789
Burmese
7365
Interlingua
7065
Persian
8482
Turkish
6669
Byelorussian
7165
Irish
8076
Polish
8475
Turkmen
7577
Cambodian
7384
Italian
8084
Portuguese
8487
Twi
6765
Catalan
7465
Japanese
8185
Quechua
8575
Ukrainian
9072
Chinese
7487
Javanese
8277
Rhaeto-Romance
8582
Urdu
6779
Corsican
7578
Kannada
8279
Rumanian
8590
Uzbek
7282
Croatian
7583
Kashmiri
8285
Russian
8673
Vietnamese
6783
Czech
7575
Kazakh
8377
Samoan
8679
Volapük
6865
Danish
7589
Kirghiz
8365
Sanskrit
6789
Welsh
7876
Dutch
7579
Korean
7168
Scots Gaelic
8779
Wolof
6978
English
7585
Kurdish
8382
Serbian
8872
Xhosa
6979
Esperanto
7679
Laothian
8372
Serbo-Croatian
7473
Yiddish
6984
Estonian
7665
Latin
8378
Shona
8979
Yoruba
7079
Faroese
7686
Latvian, Lettish
8368
Sindhi
9085
Zulu
1-30
REFERENCE
Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu”
(See page 14).
Area Code List
Enter the appropriate code number for the initial setting “Area Code” (See page 17).
Code
AD
AE
AF
AG
AI
AL
AM
AN
AO
AQ
AR
AS
AT
AU
AW
AZ
BA
BB
BD
BE
BF
BG
BH
BI
BJ
BM
BN
BO
BR
BS
BT
BV
BW
BY
BZ
CA
CC
CF
CG
CH
CI
CK
CL
CM
CN
CO
CR
CS
CU
CV
CX
CY
CZ
DE
DJ
DK
DM
DO
DZ
EC
EE
EG
EH
Area
Andorra
United Arab Emirates
Afghanistan
Antigua and Barbuda
Anguilla
Albania
Armenia
Netherlands Antilles
Angola
Antarctica
Argentina
American Samoa
Austria
Australia
Aruba
Azerbaidjan
Bosnia-Herzegovina
Barbados
Bangladesh
Belgium
Burkina Faso
Bulgaria
Bahrain
Burundi
Benin
Bermuda
Brunei Darussalam
Bolivia
Brazil
Bahamas
Bhutan
Bouvet Island
Botswana
Belarus
Belize
Canada
Cocos (Keeling) Islands
Central African Republic
Congo
Switzerland
Ivory Coast
Cook Islands
Chile
Cameroon
China
Colombia
Costa Rica
Former Czechoslovakia
Cuba
Cape Verde
Christmas Island
Cyprus
Czech Republic
Germany
Djibouti
Denmark
Dominica
Dominican Republic
Algeria
Ecuador
Estonia
Egypt
Western Sahara
Code
ER
ES
ET
FI
FJ
FK
FM
FO
FR
FX
GA
GB
GD
GE
GF
GH
GI
GL
GM
GN
GP
GQ
GR
GS
GT
GU
GW
GY
HK
HM
HN
HR
HT
HU
ID
IE
IL
IN
IO
IQ
IR
IS
IT
JM
JO
JP
KE
KG
KH
KI
KM
KN
KP
KR
KW
KY
KZ
LA
LB
Area
Eritrea
Spain
Ethiopia
Finland
Fiji
Falkland Islands
Micronesia
Faroe Islands
France
France (European
Territory)
Gabon
Great Britain
Grenada
Georgia
French Guyana
Ghana
Gibraltar
Greenland
Gambia
Guinea
Guadeloupe (French)
Equatorial Guinea
Greece
S. Georgia & S. Sandwich
Isls.
Guatemala
Guam (USA)
Guinea Bissau
Guyana
Hong Kong
Heard and McDonald
Islands
Honduras
Croatia
Haiti
Hungary
Indonesia
Ireland
Israel
India
British Indian Ocean
Territory
Iraq
Iran
Iceland
Italy
Jamaica
Jordan
Japan
Kenya
Kyrgyzstan
Cambodia6
Kiribati
Comoros
Saint Kitts & Nevis Anguilla
North Korea
South Korea
Kuwait
Cayman Islands
Kazakhstan
Laos
Lebanon
Code
LC
LI
LK
LR
LS
LT
LU
LV
LY
MA
MC
MD
MG
MH
MK
ML
MM
MN
MO
MP
MQ
MR
MS
MT
MU
MV
MW
MX
MY
MZ
NA
NC
NE
NF
NG
NI
NL
NO
NP
NR
NU
NZ
OM
PA
PE
PF
PG
PH
PK
PL
PM
PN
PR
PT
PW
PY
QA
RE
RO
RU
RW
SA
SB
1-31
Area
Saint Lucia
Liechtenstein
Sri Lanka
Liberia
Lesotho
Lithuania
Luxembourg
Latvia
Libya
Morocco
Monaco
Moldavia
Madagascar
Marshall Islands
Macedonia
Mali
Myanmar
Mongolia
Macau
Northern Mariana Islands
Martinique (French)
Mauritania
Montserrat
Malta
Mauritius
Maldives
Malawi
Mexico
Malaysia
Mozambique
Namibia
New Caledonia (French)
Niger
Norfolk Island
Nigeria
Nicaragua
Netherlands
Norway
Nepal
Nauru
Niue
New Zealand
Oman
Panama
Peru
Polynesia (French)
Papua New Guinea
Philippines
Pakistan
Poland
Saint Pierre and Miquelon
Pitcairn Island
Puerto Rico
Portugal
Palau
Paraguay
Qatar
Reunion (French)
Romania
Russian Federation
Rwanda
Saudi Arabia
Solomon Islands
Code
SC
SD
SE
SG
SH
SI
SJ
SK
SL
SM
SN
SO
SR
ST
SU
SV
SY
SZ
TC
TD
TF
TG
TH
TJ
TK
TM
TN
TO
TP
TR
TT
TV
TW
TZ
UA
UG
UK
UM
US
UY
UZ
VA
VC
VE
VG
VI
VN
VU
WF
WS
YE
YT
YU
ZA
ZM
ZR
ZW
Area
Seychelles
Sudan
Sweden
Singapore
Saint Helena
Slovenia
Svalbard and Jan Mayen
Islands
Slovak Republic
Sierra Leone
San Marino
Senegal
Somalia
Suriname
Saint Tome and Principe
Former USSR
El Salvador
Syria
Swaziland
Turks and Caicos Islands
Chad
French Southern
Territories
Togo
Thailand
Tadjikistan
Tokelau
Turkmenistan
Tunisia
Tonga
East Timor
Turkey
Trinidad and Tobago
Tuvalu
Taiwan
Tanzania
Ukraine
Uganda
United Kingdom
USA Minor Outlying
Islands
United States
Uruguay
Uzbekistan
Vatican City State
Saint Vincent &
Grenadines
Venezuela
Virgin Islands (British)
Virgin Islands (USA)
Vietnam
Vanuatu
Wallis and Futuna Islands
Samoa
Yemen
Mayotte
Yugoslavia
South Africa
Zambia
Zaire
Zimbabwe
Specifications
General
AC 120V, 60 Hz
Power consumption
14W
Dimensions (approx.)
430 X 60 X 242 mm (16.9 x 2.4 x 9.5 inches) (w x h x d)
Mass (approx.)
2.4 kg (5.3 lbs)
Operating temperature
5˚C to 35˚C (41˚F to 95˚F)
Operating humidity
5 % to 90 %
System
Laser
Semiconductor laser, wavelength 650 nm
Signal system
NTSC
Frequency response
DVD (PCM 96 kHz): 8 Hz to 44 kHz
DVD (PCM 48 kHz): 8 Hz to 22 kHz
CD: 8 Hz to 20 kHz
Signal-to-noise ratio
More than 100dB (ANALOG OUT connectors only)
Harmonic distortion
Less than 0.008%
Dynamic range
More than 100 dB (DVD)
More than 95 dB (CD)
Outputs
VIDEO OUT
1 Vp-p 75 Ω, sync negative, RCA jack x 1
S-VIDEO OUT
(Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin x 1
(C) 0.3 V (p-p) 75 Ω
COMPONENT VIDEO OUT
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
Audio output (digital audio)
0.5 V (p-p), 75 Ω, RCA jack x 1
Audio output (optical audio)
5 V (p-p), 75 Ω, Optical connector x 1
Audio output (analog audio)
2.0 Vrms (1 KHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
Accessory
Video cable . . . . . . . . . . . . . . . . . . . . . . .1
Audio cable . . . . . . . . . . . . . . . . . . . . . . .1
Remote control . . . . . . . . . . . . . . . . . . . .1
Batteries . . . . . . . . . . . . . . . . . . . . . . . . .2
z
Design and specifications are subject to change without notice.
Manufactured under license from Dolby Laboratories. Dolby, MLP Lossless and the double-D symbol are trademarks of Dolby
Laboratories. Confidential unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved.
DTS and DTS Digital Out are trademarks of Digital Theater Systems, Inc.
1-32
REFERENCE
Power requirements
LIMITED WARRANTY DVD VIDEO PLAYER
Toshiba America Consumer Products, Inc. (“TACP”) and Toshiba Hawaii, Inc. (“THI”) make the following limited warranties to original consumers for DVD Players purchased and used in the United States. THESE LIMITED WARRANTIES EXTEND TO THE
ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS DVD PLAYER AS A GIFT FROM THE ORIGINAL
CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE.
PRODUCTS PURCHASED IN THE U.S.A. AND USED IN CANADA ARE NOT COVERED BY THESE WARRANTIES.
PRODUCTS PURCHASED IN CANADA AND USED IN THE U.S.A. ARE NOT COVERED BY THESE WARRANTIES.
Limited One (1) Year Warranty*
Your Responsibility
TACP/THI warrants this DVD Player against defects in
materials or workmanship for a period of one (1) year after the
date of the original retail purchase. DURING THIS PERIOD
TACP/THI WILL, AT TACP/THI’S OPTION, REPAIR OR
EXCHANGE A DEFECTIVE DVD PLAYER WITH A NEW OR
REFURBISHED DVD PLAYER, AT TACP/THI’s OPTION.
DURING THE INITIAL NINETY (90) DAYS, THIS REPAIR OR
EXCHANGE WILL BE WITHOUT CHARGE TO YOU, EXCEPT
YOU MUST PAY FOR ALL TRANSPORTATION AND
INSURANCE CHARGES FOR THE DVD PLAYER TO BE
SHIPPED TO THE DESIGNATED TACP/THI FACILITY. AFTER
THE INITIAL NINETY (90) DAYS AND FOR THE REMAINDER
OF THE WARRANTY PERIOD, AN ADDITIONAL HANDLING
FEE WILL APPLY. YOU MUST DELIVER THE ENTIRE DVD
PLAYER AND ALL ACCESSORIES (SUCH AS POWER
CORDS, CABLES, AND THE UNIT’S REMOTE CONTROL
DEVICE) TO THE DESIGNATED TACP/THI FACILITY, AS
INSTRUCTED BY TACP/THI. TACP/THI IS NOT
RESPONSIBLE IF YOUR DVD PLAYER IS LOST OR
DAMAGED DURING SHIPMENT.
THE ABOVE LIMITED WARRANTIES ARE SUBJECT TO THE
FOLLOWING CONDITIONS:
*Commercial Units
DVD Players sold and used for commercial purposes have a
limited ninety (90) day warranty.
(1) You must provide your bill of sale or other proof of
purchase. For rental firms, proof of first rental is also
required.
(2) The limited warranties from TACP and THI are effective
only if the DVD Player is purchased and operated in the
U.S.A. or Puerto Rico.
(3) Labor service charges for installation, set up, and
adjustment of customer controls are not covered by these
limited warranties.
(4) These limited warranties extend only to defects in materials
or workmanship as limited above and do not extend to any
DVD Player or accessories which have been lost or
discarded by you, or to damage to any DVD Player or
accessories caused by misuse, accident, Acts of God
(such as lightning), or to fluctuations in electric power,
improper installation, improper maintenance or use in
violation of instructions furnished by TACP/THI; or to units
which have been modified or which have had the serial
number removed, altered, defaced or rendered illegible.
(5) Physically damaged DVD Players are not acceptable for
repair or exchange whether in or out of warranty and will
be returned as received.
Rental Units
How to Obtain Warranty Services
The warranty period for rental units begins with the first rental
or thirty (30) days from the date of shipment to the rental firm,
whichever comes first.
Owner’s Manual and Demographic Card
You should read this owner’s manual thoroughly before
operating this DVD Player. You should complete and mail the
enclosed Demographic Card within ten days after you, or the
person who has given you this product as a gift, purchased this
DVD Player. This is one way to enable TACP/THI to provide
you with better customer service and improved products.
Failure to return the Demographic Card will not affect your
rights under this warranty.
If, after following all of the operating instructions in this manual
and checking the “Troubleshooting” section, you find that
service is needed, call one of the following Customer Solutions
Centers to obtain further instructions. Have your proof of
purchase and your model and serial numbers available when
you call.
For DVD Players purchased in the United States,
except Hawaii, call TACP, toll free at 1-866-583-7353.
For DVD Players purchased in Hawaii, call THI. at
808-591-9281.
For additional updates, visit TACP’s web site:
www.toshiba.com/tacp.
1-33
LIMITATION OF IMPLIED WARRANTIES
Time for Taking Action
ALL WARRANTIES IMPLIED BY THE LAW OF ANY STATE
OF THE U.S.A., INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE EXPRESSLY LIMITED TO THE DURATION
OF THE LIMITED WARRANTIES SET FORTH ABOVE.
The time within which action must be commenced to enforce
any obligation of TACP or THI arising under this limited
warranty or under any law of the United States or of any state
thereof is hereby limited to 90 days from the date you
discovered, or should have discovered, the defect. This
limitation does not apply to implied warranties arising under
the law of any state of the U.S.A.
LIMITATION OF WARRANTY
WITH THE EXCEPTION OF ANY WARRANTIES IMPLIED BY
THE LAW OF ANY STATE OF THE U.S.A. AS HEREBY
LIMITED, THE FOREGOING LIMITED WARRANTY IS
EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES,
GUARANTEES, AGREEMENTS AND SIMILAR OBLIGATIONS
OF TACP OR THI WITH RESPECT TO YOUR DVD PLAYER.
EXCLUSION OF DAMAGES
IN NO EVENT SHALL TACP OR THI BE LIABLE FOR
CONSEQUENTIAL OR INCIDENTAL DAMAGES.
No Change, Modification, or Extension
HOW STATE LAW RELATES TO WARRANTY
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,
AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY
VARY FROM STATE TO STATE IN THE U.S.A.
SOME STATES OF THE U.S.A. DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS,
WHEN AN ACTION MAY BE BROUGHT, OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU UNDER SUCH CIRCUMSTANCES.
No person, agent, distributor, dealer or company is authorized
to change, modify or extend the terms of these limited warranties in any manner whatsoever.
ATTENTION CANADIAN CONSUMERS:
Canadian consumers are requested to complete the special Canadian “Warranty Registration Form” enclosed, and forward this
completed form with a copy of bill of sale to TOSHIBA OF CANADA to “Register and Validate” their warranty. Product must be
purchased from an Authorized Canadian Dealer. Products purchased in the U.S.A. and used in Canada are not covered by
these warranties.
Contact: Toshiba of Canada Limited
Consumer Electronics Group
191 McNabb Street
Markham, Ontario L3R 8H2
(905)-470-5400
Consumer Electronics Group
22171 Fraserwood Way
Richmond, B.C. V6W 1J5
(604)-303-2500
Consumer Electronics Group
1643 North Service Road
Droval, QC H9P 1J1
(514)-856-4100
IMPORTANT: PACKING AND SHIPPING INSTRUCTION
When you send the product to a Service Station, you must use the original carton box and packing material, then insert the original carton box containing the unit into another carton using more packing material.
1-34
OTHERS
LIMITED WARRANTY DVD VIDEO PLAYER (Continued)
PRODUCT SAFETY SERVICING GUIDELINES FOR VIDEO PRODUCTS
CAUTION : DO NOT ATTEMPT TO MODIFY THIS PRODUCT IN ANY WAY,
NEVER PERFORM CUSTOMIZED INSTALLATIONS WITHOUT MANUFACTURER’S APPROVAL. UNAUTHORIZED MODIFICATIONS WILL NOT ONLY
VOID THE WARRANTY, BUT MAY LEAD TO YOUR BEING LIABLE FOR ANY
RESULTING PROPERTY DAMAGE OR USER INJURY.
SERVICE WORK SHOULD BE PERFORMED ONLY AFTER YOU ARE
THOROUGHLY FAMILIAR WITH ALL OF THE FOLLOWING SAFETY
CHECKS AND SERVICING GUIDELINES. TO DO OTHERWISE,
INCREASES THE RISK OF POTENTIAL HAZARDS AND INJURY TO THE
USER.
WHILE SERVICING, USE AN ISOLATION TRANSFORMER FOR PROTECTION FROM A.C. LINE SHOCK.
SAFETY CHECKS
AFTER THE ORIGINAL SERVICE PROBLEM HAS BEEN CORRCTED. A
CHECK SHOULD BE MADE OF THE FOLLOWING.
SUBJECT : FIRE & SHOCK HAZARD
1. BE SURE THAT ALL COMPONENTS ARE POSITIONED IN SUCH A WAY
AS TO AVOID POSSIBILITY OF ADJACENT COMPONENT SHORTS.
THIS IS ESPECIALLY IMPORTANT ON THOSE MODULES WHICH ARE
TRANSPORTED TO AND FROM THE REPAIR SHOP.
2. NEVER RELEASE A REPAIR UNLESS ALL PROTECTIVE DEVICES
SUCH AS INSULATORS, BARRIERS, COVERS, SHIELDS, STRAIN
RELIEFS, POWER SUPPLY CORDS, AND OTHER HARDWARE HAVE
BEEN REINSTALLED PER ORIGINAL DESIGN. BE SURE THAT THE
SAFETY PURPOSE OF THE POLARIZED LINE PLUG HAS NOT BEEN
DEFEATED.
3. SOLDERING MUST BE INSPECTED TO DISCOVER POSSIBLE COLD
SOLDER JOINTS, SOLDER SPLASHES OR SHARP SOLDER POINTS.
BE CERTAIN TO REMOVE ALL LOOSE FOREIGN PARTICLES.
4. CHECK FOR PHYSICAL EVIDENCE OF DAMAGE OR DETERIORATION
TO PARTS AND COMPONENTS. FOR FRAYED LEADS, DAMAGED
INSULATION (INCLUDING A.C. CORD). AND REPLACE IF NECESSARY
FOLLOW ORIGINAL LAYOUT, LEAD LENGTH AND DRESS.
5. NO LEAD OR COMPONENT SHOULD TOUCH A RECIVING TUBE OR
A RESISTOR RATED AT 1 WATT OR MORE. LEAD TENSION AROUND
PROTRUNING METAL SURFACES MUST BE AVOIDED.
6. ALL CRITICAL COMPONENTS SUCH AS FUSES, FLAMEPROOF
RESISTORS, CAPACITORS, ETC. MUST BE REPLACED WITH EXACT
FACTORY TYPES, DO NOT USE REPLACEMENT COMPONENTS
OTHER THAN THOSE SPECIFIED OR MAKE UNRECOMMENDED CIRCUIT MODIFICATIONS.
7. AFTER RE-ASSEMBLY OF THE SET ALWAYS PERFORM AN A.C.
LEAKAGE TEST ON ALL EXPOSED METALLIC PARTS OF THE CABINET, (THE CHANNEL SELECTOR KNOB, ANTENNA TERMINALS. HANDLE AND SCREWS) TO BE SURE THE SET IS SAFE TO OPERATE
WITHOUT DANGER OF ELECTRICAL SHOCK. DO NOT USE A LINE
ISOLATION TRANSFORMER DURING THIS TEST USE AN A.C. VOLTMETER, HAVING 5000 OHMS PER VOLT OR MORE SENSITIVITY, IN
THE FOLLOWING MANNER; CONNECT A 1500 OHM 10 WATT RESISTOR, PARALLELED BY A .15 MFD. 150.V A.C TYPE CAPACITOR
BETWEEN A KNOWN GOOD EARTH GROUND (WATER PIPE, CONDUIT, ETC.) AND THE EXPOSED METALLIC PARTS, ONE AT A TIME.
MEASURE THE A.C. VOLTAGE ACROSS THE COMBINATION OF 1500
OHM RESISTOR AND .15 MFD CAPACITOR. REVERSE THE A.C. PLUG
AND REPEAT A.C. VOLTAGE MEASUREMENTS FOR EACH EXPOSED
METALLIC PART. VOLTAGE MEASURED MUST NOT EXCEED 75
VOLTS R.M.S. THIS CORRESPONDS TO 0.5 MILLIAMP A.C ANY
VALUE EXCEEDING THIS LIMIT CONSTITUTES A POTENTIAL SHOCK
HAZARD AND MUST BE CORRECTED IMMEDIATELY.
A.C. VOLTMETER
GOOD EARTH GROUND
SUCH AS THE WATER
PIPE. CONDUIT. ETC
PLACE THIS PROBE
ON EACH EXPOSED
METAL PART
SUBJECT: GRAPHIC SYMBOLS
THE LIGHTNING FLASH WITH APROWHEAD SYMBOL. WITHIN
AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE
SERVICE PERSONNEL TO THE PRESENCE OF UNINSULATED
“DANGEROUS VOLTAGE” THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE SERVICE PERSONNEL TO
THE PRESENCE OF IMPORTANT SAFETY INFORMATION IN
SERVICE LITERATURE.
SUBJECT : X-RADIATION
1. BE SURE PROCEDURES AND INSTRUCTIONS TO ALL SERVICE PERSONNEL COVER THE SUBJECT OF X-RADIATION. THE ONLY POTENTIAL SOURCE OF X-RAYS IN CURRENT T.V. RECEIVERS IS THE PICTURE TUBE. HOWEVER, THIS TUBE DOES NOT EMIT X-RAYS WHEN
THE HIGH VOLTAGE IS AT THE FACTORY SPECIFIED LEVEL. THE
PROPER VALUE IS GIVEN IN THE APPLICABLE SCHEMATIC. OPERATION AT HIGHER VOLTAGES MAY CAUSE A FAILURE OF THE PICTURE TUBE OR HIGH VOLTAGE SUPPLY AND, UNDER CERTAIN CIRCUMSTANCES, MAY PRODUCE RADIATION IN EXCESS OF DESIRABLE LEVELS.
2. ONLY FACTORY SPECIFIED C.R.T. ANODE CONNECTORS MUST BE
USED. DEGAUSSING SHIELDS ALSO SERVE AS X-RAY SHIELD IN
COLOR SETS, ALWAYS RE-INSTALL THEM.
3. IT IS ESSNTIAL THAT SERVICE PERSONNEL HAVE AVAILABLE AN
ACCURATE AND RELIABLE HIGH VOLTAGE METER. THE CALIBRA
TION OF THE METER SHOULD BE CHECKED PERIODICALLY
AGAINST A REFERENCE STANDARD, SUCH AS THE ONE AVAILABLE
AT YOUR DISTRIBUTOR.
4. WHEN THE HIGH VOLTAGE CIRCUITRY IS OPERATING PROPERLY
THERE IS NO POSSIBILITY OF AN X-RADIATION PROBLEM. EVERY
TIME A COLOR CHASSIS IS SERVICED. THE BRIGHTNESS SHOULD
BE RUN UP AND DOWN WHILE MONITORING THE HIGH VOLTAGE
WITH A METER TO BE CERTAIN THAT THE HIGH VOLTAGE DOES
NOT EXCEED THE SPECIFIED VALUE AND THAT IT IS REGULATING
CORRECTLY, WE SUGGEST THAT YOU AND YOUR SERVICE ORGANIZATION REVIEW TEST PROCEDURES SO THAT VOLTAGE REGULATION IS ALWAYS CHECKED AS A STANDARD SERVICING PROCEDURE. AND THAT THE HIGH VOLTAGE READING BE RECORDER ON
EACH CUSTOMER’S INVOICE.
5. WHEN TROUBLESHOOTING AND MAKING TEST MEASUREMENTS IN
A PRODUCT WITH A PROBLEM OF EXCESSIVE HIGH VOLTAGE,
AVOID BEING UNNECESSARILY CLOSE TO THE PICTURE TUBE AND
THE HIGH VOLTAGE SUPPLY. DO NOT OPERATE THE PRODUCT
LONGER THAN IS NECESSARY TO LOCATE THE CAUSE OF EXCES
SIVE VOLTAGE.
6. REFER TO HV. B+ AND SHUTDOWN ADJUSTMENT PROCEDURES
DESCRIBED IN THE APPROPRIATE SCHEMATIC AND DIAGRAMS
(WHERE USED).
SUBJECT: IMPLOSION
1. ALL DIRECT VIEWED PICTURE TUBES ARE EQUIPPED WITH AN INTE
GRAL IMPLOSION PROTECTION SYSTEM, BUT CARE SHOULD BE
TAKEN TO AVOID DAMAGE DURING INSTALLATION, AVOID
SCRATCHING THE TUBE. IF SCRATCHED REPLACE IT.
2. USE ONLY RECOMMENDED FACTORY REPLACEMENT TUBES.
SUBJECT : TIPS ON PROPER INSTALLATION
1. NEVER INSTALL ANY PRODUCT IN A CLOSED-IN RECESS, CUBBYHOLE OR CLOSELY FITTING SHELF SPACE. OVER OR CLOSE TO
HEAT DUCT, OR IN THE PATH OF HEATED AIR FLOW.
2. AVOID CONDITIONS OF HIGH HUMIDITY SUCH AS: OUTDOOR PATIO
INSTALLATIONS WHERE DEW IS A FACTOR, NEAR STEAM RADIATORS WHERE STEAM LEAKAGE IS A FACTOR, ETC.
3. AVOID PALCEMENT WHERE DRAPERIES MAY OBSTRUCT REAR
VENTING. THE CUSTOMER SHOULD ALSO AVOID THE USE OF DECORATIVE SCARVES OR OTHER COVERINGS WHICH MIGHT
OBSTRUCT VENTILATION.
4. WALL AND SHELF MOUNTED INSTALLATIONS USING A COMMERCIAL MOUNTING KIT. MUST FOLLOW THE FACTORY APPROVED
MOUNTING INSTRUCTIONS A PRODUCT MOUNTED TO A SHELF OR
PLATFORM MUST RETAIN ITS ORIGINAL FEET (OR THE EQUIVALENT
THICKNESS IN SPACERS) TO PROVIDE ADEQUATE AIR FLOW
ACROSS THE BOTTOM, BOLTS OR SCREWS USED FOR FASTENERS
MUST NOT TOUCH ANY PARTS OR WIRING. PERFORM LEAKAGE
TEST ON CUSTOMIZED INSTALLATIONS.
5. CAUTION CUSTOMERS AGAINST THE MOUNTING OF A PRODUCT ON
SLOPING SHELF OR A TILTED POSITION, UNLESS THE PRODUCT IS
PROPERLY SECURED.
6. A PRODUCT ON A ROLL-ABOUT CART SHOULD BE STABLE ON ITS
MOUNTING TO THE CART. CAUTION THE CUSTOMER ON THE HAZARDS OF TRYING TO ROLL A CART WITH SMALL CASTERS ACROSS
THRESHOLDS OR DEEP PILE CARPETS.
7. CAUTION CUSTOMERS AGAINST THE USE OF A CART OR STAND
WHICH HAS NOT BEEN LISTED BY UNDERWRITERS LABORATORIES,
INC. FOR USE WITH THEIR SPECIFIC MODEL OF TELEVISION
RECEIVER OR GENERICALLY APPROVED FOR USE WITH T.V.’S OF
THE SAME OR LARGER SCREEN SIZE.
8. CAUTION CUSTOMERS AGAINST THE USE OF EXTENSION CORDS,
EXPLAIN THAT A FOREST OF EXTENSIONS SPROUTING FROM A SINGLE OUTLET CAN LEAD TO DISASTROUS CONSEQUENCES TO
HOME AND FAMILY.
1-36
SERVICING PRECAUTIONS
CAUTION : Before servicing the DVD covered by this service
data and its supplements and addends, read and follow the
SAFETY PRECAUTIONS. NOTE : if unforeseen circumstances create conflict between the following servicing precautions and any of the safety precautions in this publications, always follow the safety precautions.
Remembers Safety First:
General Servicing Precautions
1. Always unplug the DVD AC power cord from the AC
power source before:
(1) Removing or reinstalling any component, circuit board,
module, or any other assembly.
(2) Disconnection or reconnecting any internal electrical
plug or other electrical connection.
(3) Connecting a test substitute in parallel with an electrolytic capacitor.
Caution : A wrong part substitution or incorrect
polarity installation of electrolytic capacitors may result
in an explosion hazard.
2. Do not spray chemicals on or near this DVD or any of
its assemblies.
3. Unless specified otherwise in this service data, clean
electrical contacts by applying an appropriate contact
cleaning solution to the contacts with a pipe cleaner,
cotton-tipped swab, or comparable soft applicator.
Unless specified otherwise in this service data, lubrication
of contacts is not required.
4. Do not defeat any plug/socket B+ voltage interlocks with
whitch instruments covered by this service manual might
be equipped.
5. Do not apply AC power to this DVD and/or any of its
electrical assemblies unless all solid-state device heat
sinks are cerrectly installed.
6. Always connect test instrument ground lead to the
appropriate ground before connection the test instrument
positive lead. Always remove the test instrument ground
lead last.
Insulation Checking Procedure
Disconnect the attachment plug from the AC outlet and turn
the power on. Connect an insulation resistance meter(500V)
to the blades of the attachment plug. The insulation resistance between each blade of the attachment plug and accessible conductive parts (Note 1) should be more than 1Mohm.
Note 1 : Accessible Conductive Parts including Metal panels, Input terminals, Earphone jacks, etc.
Electrostatically Sensitive (ES) Devices
Some semiconductor (solid state) devices can be damaged
easily by static electricity. Such components commonly are
called Electrostatically Sensitive (ES) Devices. Examples of
typical ES devices are integrated circuits and some field
effect transistors and semiconductor chip components.
The following techniques should be used to help reduce the
incidence of component damage caused by static electricity.
1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off any
electrostatic charge on your body by touching a known
earth ground. Alternatively, obtain and wear a commercially available discharging wrist strap device, which
should be removed for potential shock reasons prior to
applying power to the unit under test.
2. After removing an electrical assembly equipped with ES
devices, place the assembly on a conductive surface such
as aluminum foil, to prevent electrostatic charge buildup or
exposure of the assembly.
3. Use only a grouned-tip soldering iron to solder or unsolder
ES devices.
4. Use only an anti-static solder removal device. Some
solder removal devices not classified a “anti-static” can
generate electrical charges sufficient to damage ES
devices.
5. Do not use freon-propelled chemicals. These can
generate electrical charge sufficient to damage ES
devices.
6. Do not remove a replacement ES device from its protec
tive package until immediately before you are ready to
install it. (Most replacement ES devices are packaged with
leads electrically shorted together by conductive foam,
aluminum foil, or comparable conductive material).
7. Immediately before removing the protective material from
the leads of a replacement ES device, touch the protective
material to the chassis or circuit assembly into which the
device will be installed.
Caution : Be sure no power is applied to the chassis or
circuit, and observe all other safety precautions.
8. Minimize bodily motions when handling unpackaged
replacement ES devices. (Normally harmless motion such
as the brushing together of your clothes fabric or the lifting
of your foot from a carpeted floor can generate static electricity sufficient to damage an ES device.)
1-37
SECTION 2
CABINET & MAIN CHASSIS
CONTENTS
1. EXPLODED VIEWS ................................................................................................................2-2
1. Cabinet and Main Frame Section ...........................................................................................2-2
2. Packing Accessory Section ....................................................................................................2-3
2-1
EXPLODED VIEWS
463
1. Cabinet and Main Frame Section
463
250
5
261
467
A49
260
463
A43
463
A48
SCART&5.1CH
MODEL
ONLY
320
3
A00
463
463
A44
465
A46
4
283
A42
300
A47
452
463
261
280
2
1
A
B
C
2-2
D
2. Packing Accessory Section
806 RF CABLE
810 CABLE SET ASS'Y
811 PLUG ASS'Y 1WAY(YELLOW)
812 PLUG ASS'Y 2WAY
808 BATTERY
820 PLUG ASS'Y 1WAY(BLACK)
900 REMOCON
801 OWNER'S MANUAL
804 PACKING SHEET
803 PACKING
803 PACKING
802 BOX CARTON
OPTIONAL PARTS
2-3
SECTION 3
ELECTRICAL
CONTENTS
ELECTRICAL TROUBLESHOOTING GUIDE......................................................................3-2
1. Power check flow.....................................................................................................................3-2
2. System operation flow ............................................................................................................3-3
3. Test & debug flow ....................................................................................................................3-4
DETAILS AND WAVEFORMS ON SYSTEM TEST AND DEBUGGING ....................3-10
1. SYSTEM 27MHz CLOCK,RESET,FLASH R/W SIGNAL .......................................................3-10
2. SDRAM CLOCK ......................................................................................................................3-12
3. TRAY OPEN/CLOSE SIGNAL ................................................................................................3-12
4. SLED CONTROL RELATED SIGNAL (NO DISC CONDITION) ............................................3-14
5. LENS CONTROL RELATED SIGNAL(NO DISC CONDITION) .............................................3-14
6. LASER POWER CONTROL RELATED SIGNAL(NO DISC CONDITION) ............................3-15
7. DISC TYPE JUDGEMENT WAVEFORM ................................................................................3-15
8. FOCUS ON WAVEFORM........................................................................................................3-17
9. SPINDLE CONTROL WAVEFORM (NO DISC CONDITION).................................................3-18
10. TRACKING CONTROL RELATED SIGNAL(System checking).........................................3-19
11. RF WAVEFORM ....................................................................................................................3-20
12. MT1379 AUDIO OPTICAL AND COAXIAL OUTPUT (ASPDIF)..........................................3-20
13. MT1379 VIDEO OUTPUT WAVEFORM................................................................................3-21
14. AUDIO OUTPUT FROM AUDIO DAC ..................................................................................3-22
BLOCK DIAGRAMS ..................................................................................................................3-24
1. Overall Block Diagram ..........................................................................................................3-24
2. Power(SMPS) Block Diagram ...............................................................................................3-25
3. SERVO Block Diagram ..........................................................................................................3-26
4. MPEG & MEMORY Block Diagram .......................................................................................3-27
5. VIDEO & AUDIO Block Diagram ...........................................................................................3-28
CIRCUIT DIAGRAMS ................................................................................................................3-29
1. Power(SMPS) Circuit DIAGRAM...........................................................................................3-29
2. SYSTEM Circuit DIAGRAM ...................................................................................................3-31
3. RF & SERVO Circuit DIAGRAM ............................................................................................3-33
4. TIMER, 5.1CH, SCART, KARAOKE Circuit DIAGRAM ........................................................3-35
5. AV/JACK Circuit DIAGRAM...................................................................................................3-37
• CIRCUIT VOLTAGE CHART ....................................................................................................3-39
PRINTED CIRCUIT DIAGRAMS ............................................................................................3-43
1. MAIN P.C.BOARD ...................................................................................................................3-43
2. KEY P.C.BOARD.....................................................................................................................3-45
3. TIMER P.C.BOARD .................................................................................................................3-45
4. SMPS P.C.BOARD ..................................................................................................................3-47
5. 5.1CH P.C.BOARD ..................................................................................................................3-48
3-1
ELECTRICAL TROUBLESHOOTING GUIDE
1. Power check flow
A.
B.
No VF+
Is 5.2VA section working?
No 5V_A .
NO
NO
YES
YES
Check F102
No 5.2VA.
NO
Is 5.2V present at emitter
of Q107?
YES
YES
Replace D109.
Is 5.2VA section working?
Check F101
Replace Q107.
YES
Is there a DC voltage at
R101?
NO
NO
Is there a DC voltage At
(+) terminal of BD101?
YES
Replace IC101.
3-2
Replace R101.
YES
NO
Replace BD101.
2. System operation flow
Power On
1. 8032 initializes SERVO, DSP & RISC registers
2. Write RISC code to SDRAM
3. Reset RISC
Show LOGO
Yes
Tray Closed?
No
Tray Close to Closed position
SLED at Inner
Side?
Yes
No
SLED Moves to Inner Position
1. Judge whether have disc and disc type
2. Jump to related disc reading procedure
Recieve
OPEN/ CLOSE
Key?
No
1. Execute Pressed Key & IR Key
2. Systemoperati on Routi ne Loop
1. Stop Playback & Open Tray
2. Display tray open message & LOGO
No
Receive
CLOSE Key?
Yes
3-3
3. Test & debug flow
TEST
Check the
AC Vol tage
Power PCBA (110V
or 220V)
No
Check the POWER PART
Yes
Switch on the Power PCBA
Is
the DC Vol tage
outputs OK?
(5V, 3.3V, 8V, 12V)
No
Check the POWER PART
Yes
Make sure the main
PCBA don’t
Is 3.3V and 2.5V DC
outputs normal on main
PCBA?
No
Check the regulators or diode( D670).
Yes
No
Communication between
IC901 & MT1379 is normally?
Check the cable connection Front
Panel & Communication Signal
Connect to PC RS232 Cable and
update the FLASH memory code.
Update
FLASH(IC5A1)
successfully?
No
1. Check 27MHz system clock.
2. Check systemreset circuit.
3. Check FLASH R/Wenable signal PRD,
RWR.
4. Check RS232 SIGNALS.
5. Check FLASH Memory related circui t.
Yes
Replace FLASH( IC5A1)
A
3-4
A
RESET or Power On.
Show LOGO?
Flash
Memory operates
properly?
Check connecti on lines between FLASH
& MT1379 and the FLASH access time
whether is sui table or not.
SDRAM
works properl y?
Check connection lines between
SDRAM(IC502,IC503) & MT1379 and the
SDRAM is damaged.
MT1379
VIDEO outputs
properly?
Check the rel ated ci rcui t of MT1379.
(IC501 PIN 161,166, 168 check)
Have
TV signal output?
Check the fi l teri ng and amp ci rcui t of
TV si gnal .(IC604)
Check AV cable
connection to TV set .
Does
Tray move inside
when it is not at
closed position?
B
Normal
TROUT & TRIN
signals?
Check the load OPEN &
CLOSE switch
Normal
TRCLOSE &
TROPEN signal?
Check the Tray control IO pins
on MT1376 & MT1379.
Normal
LOAD+ & LOADsignal ?
Check the Tray control amplifying
circuit on Motor driver.(IC202)
Check the cable connection between
main PCBA and loader. (MECHA)
3-5
B
Does
the SLED move
No
to inner side when it is at
outter positi on?
Yes
Motor Driver STBY
Pin is High?
No
Check the connection line of
STBY signal .
No
Check the rel ated circuit of
FMSO.
No
Check the amp circuit on
motor driver.
Yes
Motor Driver STBY
Pin is High?
Yes
SL+ and SL- output
properl y?
Yes
Do not put in disc and tray
close.
Check the cable connection
with MECHA.
Optical
Lens has movements
for searching
Focus?
Proper FOSO outputs
to motor driver?
Yes
No
Check FOSO connection on
MT1379 and motor dirver.
No
Check the amp circuit on
motor dirver.
Yes
Proper F+
& F- outputs?
Yes
C
Check cable connect on with
pick-up head.
3-6
C
Laser turns on when
reading disc?
No
Yes
LD01 or LD02 output
properly?
No
Check the laser power circuit
on MT1336 and connecting to
power transistor. (Q204, Q205)
No
Check therel ated ci rcuit on
laser power transi stor
Yes
Collector
voltage of power
transistor is OK?
( Q204, Q205)
Yes
Check cable connection between
transistor couput and pick-up head.
Put disc in?
No
Laser off
Yes
Disc ID is correct?
No
Proper RFL signal
on MT1336?
No
Check the related circuit
on MT1336 RFL signal .
Yes
Yes
Check the RFL connection
between MT1336 and MT1379.
Does spindle rotate?
Yes
No
Proper
DMSO signal on
MT1379
No
Check DMSO related
circuit on MT1379.
No
Check the spindle control
amp circuit of motor driver.
Yes
SP+ & SP- output
properly?
Yes
Check the cable connection
between spindle and main PCBA.
D
3-7
D
Yes
Focus ON OK?
No
Proper
signals on A, B, C,
D of MT1336
No
Check connections between
MT1336 and pick-up head.
No
Check the related circuit
on MT1336 FEO sugnal .
Yes
Yes
Proper FEO signal
on MT1336?
Yes
Check FEO connection
between MT1336 and MT1379
Proper FEO signal
on MT1336?
Track On OK?
No
Check the related
circuit on MT1336
Yes
Yes
Properly TRSO signal
on MT1379?
No
Check the TRSO connection
on MT1379 and motor dirver.
Yes
T+ & T- output
properly?
No
Yes
Check cable connection on
pick-up head.
Disc is play?
No
Check RF signal waveform.
Yes
E
3-8
Check the tracking control
amp circuit on motor driver.
E
Normal
Audio output
when disc playback?
Audio
DAC received
correct data stream?
Check connection between MT1379
& Audio DAC. (Check VRST#, ACLK,
ABCK, ASDAT3)
Normal
Audio DAC
out? (IC601)
Check the related circuit of
Audio DAC. (Check Audio
out Pin 14, 15,18,19)
Check Audio filter, amplify, mute
circuit. (IC602 Application circuit)?
Normal
IR. VFD & Front
pannel key
functions?
Communications
between IR.VFD Front pannel key
& MT1379 & Front u-com(IC901)
is normally?
TEST END
Check the cable connection
on Front pannel.
3-9
Check communi cation lines
on MT1379.
DETAILS AND WAVEFORMS ON SYSTEM TEST AND DEBUGGING
1. SYSTEM 27MHz CLOCK,RESET,FLASH R/W SIGNAL
1) MT1379 main clock is at 27MHz(X501)
3.8V, 27MHz
FIG 1-1
2) MT1379 & MT1336 reset is high active.
Power Cord in
5.2VA
PWR_CTL(CN505 PIN 7)
M_RESET(CN505 PIN 9)
URST(IC501 PIN 188)
FIG 1-2
3-10
3) RS232 waveform during procedure(Downloading)
TXD(J6 PIN3)
RXD(J6 PIN 2)
FIG 1-3
4) Flash R/W enable signal during download(Downloading)
FRD(IC5A1 PIN 28)
FWR(IC5A1 PIN 11)
FIG 1-4
3-11
2. SDRAM CLOCK
1) MT1379 main clock is at 27MHz(X501)
DCLK = 93MHz, Vp-p=2.2, Vmax=2.7V
(IC502,IC503 PIN 35)
FIG 2-1
3. TRAY OPEN/CLOSE SIGNAL
1) Tray open/close waveform
OPEN((CN203 PIN 3)
CLOSE(CN203 PIN 2)
TROPEN(IC202 PIN 1)
TRCLOSE(IC202 PIN 2)
FIG 3-1
3-12
2) Tray close waveform
OPEN((CN203 PIN 3)
CLOSE(CN203 PIN 2)
TROPEN(IC202 PIN 1)
TRCLOSE(IC202 PIN 2)
FIG 3-2
3) Tray open waveform
OPEN((CN203 PIN 3)
CLOSE(CN203 PIN 2)
TROPEN(IC202 PIN 1)
TRCLOSE(IC202 PIN 2)
FIG 3-3
3-13
4. SLED CONTROL RELATED SIGNAL (NO DISC CONDITION)
FMSO(2.0V/1.4V/1.0V)
(IC501 PIN 19)
STBY(5V) – (IC201 PIN 50)
SL+(4.7V/3.6V/1.9V)
(IC202 PIN 12)
SL-(5.3V/3.7V/2.5V)
(IC202 PIN 13)
FIG 4-1
5. LENS CONTROL RELATED SIGNAL(NO DISC CONDITION)
FOSO(1.5V/1.4V/1.3V)
(IC501 PIN 12)
F+(4.0V/3.6V/3.2V)
(IC202 PIN 9)
F-(4.0V/3.6V/3.2V)
(IC202 PIN 8)
FIG 5-1
3-14
6. LASER POWER CONTROL RELATED SIGNAL(NO DISC CONDITION)
MDI1(0V/180mV)
(IC201 PIN 124)
LD01(5.0V//3.5V)
IC201 PIN 125)
LD02(5.0V/3.6V)
(IC201 PIN 126)
FIG 6-1
7. DISC TYPE JUDGEMENT WAVEFORM
F+(IC202 PIN 9)
FE(IC201 PIN 18)
RFL(IC201 PIN 19)
FIG 7-1 (DVD)
3-15
F+(IC202 PIN 9)
FE(IC201 PIN 18)
RFL(IC201 PIN 19)
FIG 7-2 (DVD)
F+(IC202 PIN 9)
FE(IC201 PIN 18)
RFL(IC201 PIN 19)
FIG 7-3 (CD)
3-16
F+(IC202 PIN 9)
FE(IC201 PIN 18)
RFL(IC201 PIN 19)
FIG 7-4 (CD)
8. FOCUS ON WAVEFORM
FE(IC201 PIN 18)
FOSO(IC501 PIN12)
F+(IC202 PIN 9)
F-(IC202 PIN 8)
FIG 8-1 (DVD)
3-17
FE(IC201 PIN 18)
FOSO(IC501 PIN12)
F+(IC202 PIN 9)
F-(IC202 PIN 8)
FIG 8-2 (CD)
9. SPINDLE CONTROL WAVEFORM (NO DISC CONDITION)
DMSO(1.4V/1.8V)
(IC501 PIN 18)
SP-(3.6V/2.4V)
(IC202 PIN 10)
SP+(3.6V/4.8V)
(IC202 PIN 11)
FIG 9-1
3-18
10. TRACKING CONTROL RELATED SIGNAL(System checking)
TE(IC201 PIN 21)
TRSO(IC501 PIN 13)
T-(IC202 PIN 7)
T+(IC202 PIN 6)
FIG 10-1(DVD)
TE(IC201 PIN 21)
TRSO(IC501 PIN 13)
T-(IC202 PIN 7)
T+(IC202 PIN 6)
FIG 10-2(CD)
3-19
11. RF WAVEFORM
RFOP(2.3V/1.1V)
(IC201 PIN 6)
RFON(0.8V/2.0V)
(IC201 PIN 7)
FIG 11-1
12. MT1379 AUDIO OPTICAL AND COAXIAL OUTPUT (ASPDIF)
(IC501 PIN 153)
FIG 12-1
3-20
13. MT1379 VIDEO OUTPUT WAVEFORM
1) Full colorbar signal(CVBS)
DCLK = 93MHz, Vp-p=2.2, Vmax=2.7V
(IC604 PIN 23)
FIG 13-1
2) Y
(IC604 PIN 21)
FIG 13-2
3-21
3) C
DCLK = 93MHz, Vp-p=2.2, Vmax=2.7V
(IC604 PIN 26)
FIG 13-3
14. AUDIO OUTPUT FROM AUDIO DAC
1) Audio L/R
(JK601 PIN 4,5)
FIG 14-1
3-22
2) Audio related Signal
ASDATA3
ASDAT3(IC501 PIN 157)
ABCK(IC501 PIN 148)
ALRCK(IC501 PIN 149)
FIG 14-2
3-23
M
LOAD+,LOAD-
3-24
F+,F-,T+,T°‹
+P8V
V25
3V3M
AV33
+12V
KEY Input
6MHz
X-TAL
RC901
REMOCON
RECEIVER
IC903
RESET IC
27MHz
X-TAL
R/Pr G/Y
B/Pb
IC604
MM1623XFBE
VIDEO BUFFER
VCC
Y[1:6]
12V
DV33
DIG901
FLD DISPLAY
IC901
GMS81C2012(Hynix)
Front Micom
BUFFER IC
74HCT244
VFD_SCK
VFD_TXD
M_REQ
VFD_RXD VCC
S_REQ
IC510
MUTE
AVCC
VCC
PWRCTL
IC501
MT1379E
DSP/MPEG
ASPDIF
RVCC
VCC
SCLK,SDEN,SDATA
PWMOUT2
URST
5V
5V2A
-27VA
VF-
VF+
IC201
MT1336E
RF
RFON,RFOP,FEO,RFL,CSO
TEO,BDO,RFRP,HTRC,V2P8
MA[00:10]
BA0
DCLK
DCKE
CS#
RAS#
CAS#
WE#
DQM[2:3]
POWER
BOARD
ADIN
TROPEN,TRSO,FOSO,DMSO,FMSO
V1P4
STBY,TRCLOSE
RVCC
AV33/DV33/V25
A[00:19]
PCE#
AD[0:7]
PRD#
PWR#
DQ[16:31]
AC 90V~240V
50HZ/60Hz
VCC/+8V
LIMIT
APC
DVD:RF0,A,B,C,D
CD:RF0,A,B,C,D,E,F
MDI1
LD01,LD02, IOA, V2.0
IC503
M12L16161A
512K
2Banks
16BIT
SDRAM
IC502
M12L16161A
512K
2Banks
16BIT
SDRAM
IC5A1
29LV800TA-70
1M
8BIT
FLASH ROM
DQ[00:15]
TROUT,TRIN
PICK
UP
DV33
DV33
DV33
DQM[0:1]
IC202
LA6560
MOTOR
DRIVER
M
SL+,SL-
M
SLED
LOADING
(FEEDING)
MOTOR
MOTOR
SPINDLE
MOTOR
DISC
Y
C
FL RL CENTER
FR RR WOOFER
L/R
FL
FR
MIC_IN
MIC_DETC
RL CENTER
RR WOOFER
+12V
IC602/IC302/IC303/IC304
NJM4580
OP-AMP
L/R
IC601
CS4391(2DAC)
IC451
PCM1603(6DAC)
VCC/DV33/3V3M
IC5K1
CS5331A(ADC)
IC5K2
KA741(OP-AMP)
VCC
IC505
KS24C021CS
EEPROM
V33
J6
RS232
DV33
COAX OPTICAL
VRST#
ASDAT[0:3]
VSCK
VSDA
ASTB
ACLK
ABCLK
ALRCK
AMDAT
SDA
SCL
RXD
TXD
IC506
M12L64164A
1M
4Banks
16BIT
SDRAM
DV33
BLOCK DIAGRAMS
1. Overall Block Diagram
MA11,BA1
ASPECT
CVBS
SP+,SP-
DECK MECHANISM
DV7800M'S
TOSHIBA
SWITCHING IC
RECTIFIER
3-25
AC90~240V
TRANS
FEED B.
LPF
LPF
RECTIFIER(5.2V)
RECTIFIER(3.8V)
REG(3.3V)
REG(8V)
REG(12V)
PWR ON/OFF
LPF
LPF
RECTIFIER(9V)
RECTIFIER(14V)
RECTIFIER(FLD)
ON/OFF
3.3V/3.3V_M
5V_A
5.2VA
8V
12V
-29VA
VF-
VF+
2. Power(SMPS) Block Diagram
LINE FILTER
DV7800M'S
TOSHIBA
M/D
PICK
UP
3-26
LOAD+, LOAD-
SL+, SL-
SP+, SP-
F+, F-, T+, T-
LIMIT,TRIN,TROUT
DVD: A,B,C,D, RFO
CD: A,B,C,D, E, F,RFO
V20
LD0 1, LDO 2, IOA
MDI 1
ALPC
IC202
LA6560
Motor Driver
TRCLOSE
STBY,V1P4
IC201
MT1336E
RF Signal
Processor
FOSO,TRSO,FMSO
DMSO,,TROPEN
ADIN
FEO,TEO,RFL,RFRP
BDO,CSO,HTRC,V2P8
RFOP,RFON
IC302
GM72V161621
1M x 16bit
SDRAM
MA[0:10]
DQM0 ,DQM1
WE#,CAS#,RAS#
CS#,BA0,
DCLK
DCKE
IC501
MT1379
DVDPLAYER
COMBO
CHIP
27MHz
X-TAL
RXD, TXD
SCL, SDA
PRD#, PWR#
PCE#
A[0:19]
AD[0:7]
MA[0:10]
DQM0 ,DQM1
WE#,CAS#,RAS#
CS#,BA0,
DCLK
DCKE
IC303
GM72V161621
1M x 16bit
SDRAM
DQ[16:31]
SDEN, SDATA,
SCLK,PWMOUT2
DQ[0:15]
X501
RS232C(MTK)
EEP
ROM
FLASH
ROM
3. SERVO Block Diagram
DV7800M'S
TOSHIBA
3-27
RF IC
Interface
FEO,CSO,TEO,ADIN,BDO
SDATA,SDEN,SCLK,URST
FMSO,DMSO
V1P4,V2P8
TROPEN,TRSO,FOSO
ACLK,ABCK
ALRCK
URST,S_REQ
VFD_RXD
DCLK,WE,CAS,RAS
CS,DCKE,MA[0:10]
DQM0,DQM1
IC501 (MPEG + DSP)
MT1379
X501
27MHz
FRONT MICOM
Interface
(FRONT BOARD)
RFOP,RFON,HTRC,RFRP,RFL
AMDAT
IC5K1
A/D Con.
(Karaoke)
DQ[0:15]
IC5K2
OP Amp
SCKO,TXDO,M-REQ
Voltage level shift
IC510 (74HCT244)
DQM2,DQM3
AD[0:7]
IC505
EEPROM
MUTE,VSCK,VSDA
ASDTA[0:3]
ASTB,SCL,SDA
ASPDIF
ACLK,ALRCK,ABCK
Y4(Y),Y5(Cb),Y6(Cr)
ASPECT(16:9)
Y2(Y),Y3(Color)
SCL,SDA
IC5A1
FLASH MEMORY
(8 M )
PWR,PCE,PRD
KARAOKE
BOARD
VFD_SCK
VFD_TXD
M_REQ
IC503
SDRAM
16M
DQ[16:31]
A[0:19]
IC502
SDRAM
16M
AUDIO
Interface
VIDEO
Interface
4. MPEG & MEMORY Block Diagram
DV7800M'S
TOSHIBA
MPEG
MP
EG
MPEG
MPEG
3-28
ADATA3
ADATA2
ADATA1
SDA
SCL
ACLK
DAC RESET
ADATA3
SDA
SCL
ACLK
DAC RESET
(Y/C)
(R.G.B) / (Y.Pb.Pr )
IC301
AUDIO DAC
(5.1CH)
5.1CH BOARD
IC601
AUDIO DAC
(2CH)
IC604
VIDEO 6dB
Amp
IC304 (OP Amp)
LPF&Buffer
IC303 (OP Amp)
LPF&Buffer
IC302 (OP Amp)
LPF&Buffer
IC602 (OP Amp)
LPF&Buffer
SUPER VIDEO (Y/C)
WOOFER
CENTER
REAR ‘L’
FRONT ‘L’
REAR ‘R’
FRONT ‘R’
AUDIO ‘R’
AUDIO ‘R’
COMPONENT (R.G.B) / (Y.Pb.Pr )
CVBS
A/V
JACK
5. VIDEO & AUDIO Block Diagram
DV7800M'S
TOSHIBA
CIRCUIT DIAGRAMS
IMPORTANT SAFETY NOTICE
WHEN SERVICING THIS CHASSIS, UNDER NO CIRCUMSTANCES SHOULD THE ORIGINAL DESIGN BE
MODIFIED OR ALTERED WITHOUT PERMISSION
FROM THE TOSHIBA ELECTRONICS CORPORATION.
ALL COMPONENTS SHOULD BE REPLACED ONLY
WITH TYPES IDENTICAL TO THOSE IN THE ORIGI-
1. POWER(SMPS) CIRCUIT DIAGRAM
NAL CIRCUIT. SPECIAL COMPONENTS ARE SHADED NOTE :
ON THE SCHEMATIC FOR EASY IDENTIFICATION.
1. Shaded( ) parts are critical for safety. Replace only
THIS CIRCUIT DIAGRAM MAY OCCASIONALLY DIFwith specified part number.
FER FROM THE ACTUAL CIRCUIT USED. THIS WAY,
2. Voltages are DC-measured with a digital voltmeter
IMPLEMENTATION OF THE LATEST SAFETY AND
during Play mode.
PERFORMANCE IMPROVEMENT CHANGES INTO
THE SET IS NOT DELAYED UNTIL THE NEW SERVICE
LITERATURE IS PRINTED.
VF(+) Power Dead.
F102 is defective.
VF(-) Power Dead.
ZD101 is defective.
12V Power Dead.
IC103 is defective.
39
8V Power Dead.
IC105 is defective.
Power Dead.
IC101 is defective.
3.3V Power Dead.
IC106 is defective.
Without
KSB1151
5V Power Dead.
Q107 is defective.
1000PF
'03. 02. 26 R16006A
TOSHIBA
NOTES)
NOTES)
NOTES)
NOTES)
Warning
Parts that are shaded are critical
With respect to risk of fire or
electricial shock.
NOTES :
Symbol denotes AC ground.
Symbol denotes DC chassis ground.
3-29
3-30
2. SYSTEM CIRCUIT DIAGRAM
No Power on
Video signal not
appeared
AUDIO DAC
interface
VIDEO
interface
System not working or
screen is abnormal
RF & MOTOR DRIVE
interface
System not working or
Digitron not display
System not operate
Digitron all not display
System not working
Program download fail
Video signal Y
'02. 12. 26 R14600A
TOSHIBA
Video signal Color
3-31
3-32
3. RF & SERVO CIRCUIT DIAGRAM
CD/DVD LD
will not on
'02. 12. 26 R14601A
TOSHIBA
3-33
3-34
4. TIMER, 5.1CH, SCART, KARAOKE CIRCUIT DIAGRAM
Power LED abnormal
(OPTIONAL PART)
Karaoke not operate.
Remocon not operate
System not operate
System not operate or
Digitron abnormal or
Key not operate.
Digital abnormal
(OPTIONAL PART)
(OPTIONAL PART)
5.1CH Audio Bad
'03. 3. 10 R14603B
TOSHIBA
3-35
3-36
5. AV/JACK CIRCUIT DIAGRAM
All Video signal isn't
appear or bad
2CH Audio out bad.
SACD OPTION
2.5V doesn't appeat
System not working
2CH Audio out bad.
Video Signal Y
Video Signal CVBS
Video Signal Color
2CH Audio
'02. 12. 26 R14602A
TOSHIBA
3-37
3-38
• CIRCUIT VOLTAGE CHART
IC201(MT1336E)
PIN STOP PLAY
1
1.03 2.99
2
5.11 5.08
3
0
0
4
0
0
5
5.11 5.07
6
0
1.95
7
0
0
8
0
0
9
5.11
0
10 5.11 5.08
11 5.11 5.08
12
0
0
13 5.11
0
14 5.11 5.08
15 2.84 2.81
16 1.45 1.43
17 2.08 2.07
18 1.37 1.42
19 0.69
2.3
20
2.4
0
21 2.35
0
22 5.11 5.08
23
0
0
24 2.59
3.2
25 0.19 1.88
26 1.58
0
27 2.56 3.13
28
2
2.01
29
2
2.06
30 2.96 1.52
31
0
0
32 0.06 2.07
33 0.07 2.07
34
0
0
35
0
0
36
0
0
37 5.13
0
38
0
0
39
0
0
40
0
0
41
0
0
42 5.12 5.09
43 5.12 5.09
44 5.12 5.09
45 5.12 5.09
46 5.12 5.09
47
0
0
48 5.12 5.09
49 5.12
0
50 5.08 5.06
51 5.09 5.07
52
5.1
0
53
0
0
54 5.13
0
55 0.09
0.2
56 1.61
0
57
0
0
58
0
0
59
0
0
60
0
0
61 3.28
0
62
0
0
63
0
0
64
0
0
65
0
0
66 0.26
0
67 5.12 5.08
68
0
0
69 5.12
0
70 3.21 2.03
71 3.46
2.2
72 2.81
0
73
0
0
74 0.21 0.09
75 0.22
0
76
0
0.1
77 0.21 0.09
78 0.23 0.09
79 0.21 0.08
80 0.23 0.08
IC202(MOTOR)
STOP
0
0
8.04
0.12
0
3.64
3.62
3.64
3.6
3.62
3.63
3.62
3.64
8.04
1.45
0.27
0.29
1.45
1.45
1.45
1.45
1.45
1.47
1.45
1.45
0.95
0
1.45
5.15
1.45
1.45
1.45
1.46
5.08
5.15
0
PLAY
0
0
8.01
0.06
0.06
3.69
3.61
3.53
3.76
2.43
4.85
3.72
3.57
8.01
1.48
1.39
1.32
1.43
1.43
0.82
1.43
1.43
1.37
1.43
1.43
0.91
0
1.43
5.11
1.43
1.43
1.43
1.45
5.06
5.11
0
IC501(MT1379)
STOP
1.22
0
0.96
2
0
1.48
0
3.2
0.12
0.12
3.25
1.41
1.41
0
1.42
3.3
2.53
1.42
1.42
0
2.61
0.75
2.83
1.9
1.72
0.68
2.84
0
2.85
1.83
0.91
1.43
1.51
1.51
3.3
0.81
1.45
1.82
1.2
2
2.17
2.53
1.96
1.79
0.8
0.8
0.8
3.3
0
0
0
0
0
0
3.25
1.21
0
3.29
0
0
2.59
2.58
0
2.59
3.29
3.3
3.29
2.57
5.19
2.59
0.12
2.53
2.59
3.29
2.61
3.27
0
0.94
0.78
0.89
PLAY
1.22
0
0.9
2.06
1.51
1.47
1.56
1.52
0.06
0.06
3.25
1.49
1.41
0
1.42
0
2.53
2.27
1.39
0
2.58
1.46
1
0.89
0.39
0.31
3.16
0
0.66
0.49
1.39
1.2
1.57
1.43
3.29
1.26
1.02
1.6
1.5
2.06
1.95
2.52
1.9
1.9
1.72
1.96
1.84
2.63
0.13
0.07
0
0
0
0
3.27
1.18
0
3.29
0
0
2.57
2.58
0
2.56
3.29
3.29
3.29
2.56
5.18
2.57
0.08
2.52
2.57
3.29
2.61
3.24
0
1.04
1.06
1.15
IC502(SDRAM)
STOP
3.27
1.18
1.1
0
0.66
0.85
3.27
0.51
3.06
0
0.06
3.18
3.27
2.94
0.47
2.93
3.21
2.87
0.15
0
3.09
3.09
3.09
3.09
3.27
0
0.15
1.84
1
0.54
0.06
0.05
0
0.73
1.48
2.91
0.07
3.27
1.06
0.47
0
0
1.12
3.27
1.21
1.31
0
1.43
0.88
0
PLAY
3.28
1.26
1.52
0
1.07
1.12
3.28
0.97
0
0
0.98
0.87
3.28
2.56
0.42
3.01
3.22
2.95
1.32
0.05
1.32
1.32
1.32
1.33
3.29
0
1.36
2.36
2.32
1.75
0.06
0.06
0
1.26
1.55
2.53
0
3.28
1.05
0.98
0
0.6
1.24
3.28
0.99
1.34
0
1.44
1.01
0
IC505(EEPROM)
STOP
0
0
0
0
3.28
3.28
0
3.28
PLAY
0
0
0
0
3.29
3.29
0
3.29
IC510(BUFFER)
STOP
0
2.59
0
2.59
0
3.24
0
0.14
0
0
0.15
0
0.15
5.19
0.14
5.25
0.15
5.23
0
5.25
IC5A1(FLASH)
PLAY STOP PLAY
0
0.08 0.16
2.55 1.82 0.45
0
2.84
0
2.56 2.83 3.12
0
0.69 0.26
3.23 1.72 0.25
0
1.92
0.9
0.08
1.7
1.45
0
0
0
0
0
0
0.09 3.27 3.29
0
3.56 3.55
0.08 3.29 3.29
5.19
0
0
0.09 0.23 0.06
5.24
0
0
0.08
0
0
5.23
0
0.87
0
1.98 2.64
5.25 2.28 2.18
2.13 1.96
1.67 2.01
1.99 1.72
1.93 2.19
2.05 1.94
0
0
0
0
0
0
1.49 2.03
0.16 1.07
1.96 1.25
0.16
1.1
0.99
2.2
1.17 1.07
0.79 1.82
0.15 1.07
3.29
3.3
1.93 3.09
0.16 1.07
1.5
2.2
0.16 1.07
1.21 2.64
0.16 1.08
1.64 1.48
2.05 2.06
0
0
0
0
0.07 0.13
IC5K1(KARAOKE)
STOP
2
1.64
1.64
1.58
2.23
0
5.12
2.23
PLAY
0
1.63
1.64
1.56
2.23
0
5.08
2.23
IC601(CS4391)
STOP
3.28
3.28
0
1.63
1.64
1.59
0
3.28
3.28
0
5.01
2.31
4.96
1.42
2.4
0
5.11
2.41
2.43
0
PLAY
3.29
3.28
1.65
1.64
1.65
1.61
0
0
3.29
0
5.01
2.31
0
2.41
2.39
0
5.09
2.41
2.43
0
IC602(AMP)
STOP
5.52
5.52
5.51
0
5.51
5.51
5.52
12.03
PLAY
5.49
5.48
5.47
0
5.48
5.48
5.47
12.03
3-39
IC604(MM1623XFBE)
STOP
5.09
2.43
5.09
1.45
0
1.45
0
2.47
0
1.14
0
2.42
5.09
2.43
0
2.49
0
2.48
0
1.18
1.76
0
1.76
0
0
0
0.06
5.09
PLAY
5.08
2.42
5.08
0
0
1.69
0
2.46
0
1.76
0
2.42
5.08
2.42
0
2.47
0
2.47
0
2.3
2.17
0
2.24
0
0
0
0.05
0
IC201(MT1336E)
IC202(MOTOR)
IC501(MT1379)
PIN STOP PLAY STOP PLAY STOP
81 0.22
0
0.99
82
0
0
2.52
83
0
0
3.09
84 0.07
0
0.37
85 0.07 2.27
3.08
86 1.97
0
3.07
87 1.96
1.9
0.59
88 1.54 1.71
1.57
89 0.19 2.22
3.2
90 0.21
0
2.77
91 0.22 0.06
0.22
92 0.22
0
0
93 0.23 0.06
3.32
94 0.23 0.06
0.16
95 2.28
0
3.31
96 2.28 2.25
3.3
97 2.27 1.23
3.3
98 2.27 2.23
3.32
99 2.27 2.23
0.16
100 2.26 2.23
3.32
101 2.08 2.17
3.3
102 2.07 2.17
0
103 2.07 2.18
1.56
104 2.08
0
0.94
105 0.14 0.15
0.41
106 0.14 0.16
0.05
107
0
0
0
108 1.28 1.28
3.27
109 5.18 5.05
0
110 0.14 0.16
0.19
111 0.15 0.15
3.3
112 0.13 0.16
0.18
113 0.14 0.15
2.98
114 5.1
5.05
3.02
115 2.07 2.09
0
116 2.06 2.09
2.86
117
0
0
2.86
118
0
0
0
119
0
0
0
120 5.1
5.05
2.55
121 0.13 0.15
3.03
122 0.14 0.15
3.03
123
0
0.18
0.22
124
0
0.18
0.22
125 5.08 5.03
0
126 5.08 3.16
3.31
127 0.06 2.08
0.26
128
0
0
3.31
129
3.3
130
3.3
131
3.31
132
0.16
133
3.3
134
3.3
135
0
136
2.86
137
2.86
138
0.07
139
0.09
140
0.07
141
0.07
142
0.09
143
0.07
144
0.09
145
0.09
146
0
147
0.09
148
0.07
149
0.06
150
0
151
0.07
152
0
153
0
154
0
155
0
156
0
157
0
158
0
159
0
160
0
3-40
IC502(SDRAM)
IC505(EEPROM)
IC510(BUFFER)
IC5A1(FLASH)
IC5K1(KARAOKE)
IC601(CS4391)
IC602(AMP)
IC604(MM1623XFBE)
PLAY STOP PLAY STOP PLAY STOP PLAY STOP PLAY STOP PLAY STOP PLAY STOP PLAY STOP PLAY
1.34
2.52
1.33
1.16
1.1
1.08
1.04
2.53
3.13
2.53
1.68
0
1
1.58
1.62
1.08
3.29
1.62
1.09
1.27
1.32
0
1.55
1.25
0
0.06
0.06
3.26
0
1.74
3.29
1.62
2.38
1.48
0
3.01
2.54
0
2.5
2.51
1.4
1.4
1.39
0.34
0
0.98
1.64
1.53
1.15
3.29
1.49
0.89
0
1.07
0
2.53
2.53
0.86
0.99
2.51
0.94
1.13
1.19
1.07
0
1.51
1.25
1.64
0
1.65
3.29
1.6
1.64
1.44
0
0
1.63
3.29
3.27
1.27
IC201(MT1336E)
IC202(MOTOR)
IC501(MT1379)
PIN STOP PLAY STOP PLAY STOP
161
0
162
0
163
0
164
0
165
0
166
0
167
0
168
0
169
0
170
0
171
0
172
3.01
173
0
174
0
175
0
176
0
177
0
178
0
179
0
180
0
181
2.04
182
0
183
0
184
0
185
0
186
187
0
188
0
189
0
190
0
191
0.23
192
0
193
0
194
0
195
0
196
0
197
0
198
0
199
0
200
0
201
0
202
0
203
0
204
0
205
0
206
0
207
0
208
0
209
0
210
0
211
0
212
0
213
0
214
0
215
1.02
216
0
IC502(SDRAM)
IC505(EEPROM)
IC510(BUFFER)
IC5A1(FLASH)
IC5K1(KARAOKE)
IC601(CS4391)
IC602(AMP)
IC604(MM1623XFBE)
PLAY STOP PLAY STOP PLAY STOP PLAY STOP PLAY STOP PLAY STOP PLAY STOP PLAY STOP PLAY
1.27
2.35
0
0.73
3.27
0.5
0
0.53
3.27
0.59
0
0.72
0.72
0
2.73
3.13
3.13
3.25
0
0
2.64
2.52
0
0.09
3.26
0.08
0
0
0
0
3.29
0
0
0
0
1.63
0
0
2.15
1.44
1.44
1.43
1.43
1.42
2.1
2.07
1.41
1.52
1.43
2.81
3.28
0.12
0.12
1.43
1.43
3-41
E
C
B
E
C
B
Q201
STOP PLAY
0
0
0
5.09
0.68
0
Q501
STOP PLAY
0
0
0
0
0.83
0.83
3-42
Q202
STOP PLAY
0
0
0
0
0
5.04
Q600
STOP PLAY
5.17 0
0
0.13
5.11 0
Q203
STOP PLAY
0
0
0
0.19
5.04 0
Q603
STOP PLAY
0
0
0
0
0.75 0
Q204
STOP PLAY
5.14 4.34
0
2.42
5.08 3.64
Q604
STOP PLAY
0
0
0
0
0.75 0.16
Q205
STOP PLAY
5.14
5.1
0.5
0
5.08
5.05
Q605
STOP PLAY
0
0
0
0
0.74
0.74
PRINTED CIRCUIT DIAGRAMS
1. MAIN P.C.BOARD
5600AD
LOCATION GUIDE
3-43
3-44
2. KEY P.C.BOARD
(Solder Side)
3. TIMER P.C.BOARD
LOCATION GUIDE
(Solder Side)
3-45
3-46
4. SMPS P.C.BOARD
5. 5.1CH P.C.BOARD
LOACTION GUIDE
LOCATION GUIDE
(Solder Side)
(Solder Side)
3-47
3-48
SECTION 4 MECHANISM OF DVD PART
CONTENTS
DECK MECHANISM PARTS
LOCATIONS
• Top View..................................................4-1
• Top View(without Tray Disc) .................4-1
• Bottom View ...........................................4-1
5. Frame Assembly Up/Down ..............4-4
6. Belt Loading......................................4-4
7. Gear Pulley .......................................4-4
8. Gear Loading ....................................4-4
9. Guide Up/Down.................................4-4
10. PWB Assembly Loading ................4-4
11. Base Main........................................4-4
DECK MECHANISM
DISASSEMBLY
EXPLODED VIEW
1. Holder Clamp....................................4-2
1. Deck Mechanism Exploded View....4-5
1-1. Clamp Assembly Disc.......................4-2
1-1-1. Plate Clamp ..................................4-2
1-1-2. Magnet Clamp ..............................4-2
1-1-3. Clamp Upper.................................4-2
2. Tray Disc ...........................................4-2
3. Base Assembly Sled ........................4-3
3-1. Gear Assembly Feed ........................4-3
3-2. Gear Assembly Middle......................4-3
3-3. Gear Assembly Rack ........................4-3
4. Rubber Rear......................................4-3
DECK MECHANISM PARTS LOCATION
• Top View (With Tray)
Procedure
Parts
Fixing Type
Starting No.
1
2
1
Holder
2 Screws,
Clamp
2 Locking Tabs
Disass Figembly ure
4-1
4-1
Clamp Assembly
Disc
1, 2
3
Plate Clamp
4-1
1, 2, 3
4
Magnet Clamp
4-1
1, 2, 3, 4
5
Clamp Upper
4-1
1
6
Tray Disc
4-2
1, 6
7
Base Assembly Sled 4 Screws,
4-3
1, 2, 6
8
Gear Assembly
4-3
1, 2, 6, 8
9
1, 2, 6, 8,
10 Gear Assembly
Feed
4-3
Gear
Middle
• Top View (Without Tray)
9
1 Screw
4-3
Rack
1, 2, 7
11 Rubber Rear
1, 2, 7
12 Frame Assembly
4-3
1 Screw
Bottom 4-4
Up/Down
1, 2
13 Belt Loading
1, 2 ,13
14 Gear Pulley
1, 2, 13, 14 15 Gear Loading
1 Locking Tab
4-4
1 Locking Tab
1, 2, 7, 12, 13, 14 16 Guide Up/Down
1, 2, 13
17 PWB Assembly
Loading
4-4
4-4
4-4
1 Locking Tab
Bottom 4-4
1 Hook
2Screw
1, 2, 7, 12, 13, 18 Base Main
4-4
14, 15, 16, 17
• Bottom View
Note
When reassembling, perform the procedure in
reverse order.
The “Bottom” on Disassembly column of above
Table indicates the part should be disassembled
at the Bottom side.
4-1
DECK MECHANISM DISASSEMBLY
Fig. 4-1
Fig. 4-2
1. Holder Clamp (Fig. 4-1)
2. Tray Disc (Fig. 4-2)
1) Release 2 Screws(S1).
2) Unhook 2 Locking Tabs(L1).
3) Lift up the Holder Clamp and then separate it from the
Base Main.
1-1. Clamp Assembly Disc
1) Place the Clamp Assembly Disc as Fig. (A)
2) Lift up the Clamp Assembly Disc in direction of
arrow(A).
3) Separate the Clamp Assembly Disc from the Holder
Clamp.
1-1-1. Plate Clamp
1) Turn the Plate Clamp to counterclockwise direction and
then lift up the Plate Clamp.
1-1-2. Magnet Clamp
1-1-3. Clamp Upper
4-2
1) Insert and push a Driver in the emergency eject
hole(A) at the right side, or put the Driver on the
Lever(B) of the Gear Emergency and pull the Lever(B)
in direction of arrow so that the Tray Disc is ejected
about 15~20mm.
2) Pull the Tray Disc until it is separated from the Base
Main completely.
DECK MECHANISM DISASSEMBLY
Fig. 4-3
3. Base Assembly Sled (Fig. 4-3)
3-3. Gear Assembly Rack
1) Release the Scerw(S3)
1) Release 4 Screw(S2).
2) Disconnect the FFC Connector(C1)
3-1. Gear Assembly Feed
3-2. Gear Assembly Middle
4. Rubber Rear (Fig. 4-3)
4-3
DECK MECHANISM DISASSEMBLY
Fig. 4-4
5. Frame Assembly Up/Down (Fig. 4-4)
Note
Put the Base Main face down(Bottom Side)
1) Release the Screw(S4)
2) Unlock the Locking Tab(L3) in direction of arrow and
then lift up the Frame Assembly Up/Down to separate
it from the Base Main.
Note
• When reassembling move the Guide Up/Down in direction
of arrow(C) until it is positioned as Fig.(C).
• When reassembling insert (A) portion of the Frame
Assembly Up/Down in the (B) portion of the Guide
Up/Down as Fig.(B)
6. Belt Loading(Fig. 4-4)
Note
Put the Base Main on original position(Top Side)
7. Gear pulley (Fig. 4-4)
1) Unlock the Locking Tab(L4) in direction of arrow(B) and
then separate the Gear Pulley from the Base Main.
8. Gear Loading (Fig. 4-4)
9. Guide Up/Down (Fig. 4-4)
1) Move the Guide Up/Down in direction of arrow(A) as
Fig.(A)
2) Push the Locking Tab(L5) down and then lift up the
Guide Up/Down to separate it from the Base Main.
Note
When reassembling place the Guide Up/Down as Fig.(C)
and move it in direction arrow(B) until it is locked by the
Locking Tab(L5). And confirm the Guide Up/Down as Fig.(A)
10. PWB Assembly Loading (Fig. 4-4)
Note
Put the Base Main face down(Bottom Side)
1) Release 2 Screws(S5)
2) Unlock the Loading Motor (C2) from the Hook (H1) on
the Base Main.
3) Unlock 2 Locking Tabs(L6) and separate the PWB
Assembly Loading from the Base Main.
11. Base Main(Fig. 4-4)
4-4
EXPLODED VIEWS
1. Deck Mechanism Exploded View
A01
001
002
003
429
A26
429
004
430
025
012
026
A03
432
431
030
024A
024
431
029
024B
431 031
430
024A
430
012
012
028
433 021
433
435
430
022
012
013
010
018
014
020
017
011A
A02
015A
015B
430
015
015C
431
011
4-5
4-6
NOTES)
NOTES)
NOTES)
NOTES)
Warning
Parts that are shaded are critical
With respect to risk of fire or
electricial shock.
SECTION 5 REPLACEMENT PARTS LIST
TOSHIBA MODEL : SD-4900-S-TU/SD-4900-S-TC
S AL LOCA. NO. TOSHIBA PART LG PART NO. DESCRIPTION
NSP : Not avallable as service parts.
RUN DATE : 27-JULY-02
SPECIFICATION
REMARKS
*** INDIVIDUAL PARTS ***
250
79096706
3110R-D001C
CASE
283
AF000166
3580R-T091C
DOOR,CASE
DVD DVB7042NDM MOLD TRAY
300
79096072
6410RAHX02A
POWER CORD
SP-120P/JL001 CHAUS/JULIAN UL/
463
79096043
353-051G
SCREW,DRAWING
+ 2 D3.0 L8.0 MSWR3/FN TB ROUN
465
79097903
353-046K
SCREW
SPECIAL (3X10 B.K)
*** PACKING ACCESSORY
DVB7022NM PRESS 55-430-J597G W
***
801
AF000169
3835RS0060H
INSTRUCTION ASSEMBLY
DVD DVB7042NDM HA1UTT
SD-4900-S-TU
801
AF000170
3835RS0060J
INSTRUCTION ASSEMBLY
DVD DVB7042NDM HA1CTT
SD-4900-S-TC
802
AF000172
3890R-H820V
BOX
DVB7042NDM HA1UTT SWW3-A 0.870
SD-4900-S-TU
802
AF000171
3890R-H820U
BOX
DVB7042NDM HA1CTT
SD-4900-S-TC
803
79096672
3920R-E066A
PACKING,CASING
DV7000 0.02 68 EPS 10 1165 238
804
AF000019
292-053B
BAG
SOFT(MIDI)
808
79096103
841-0021
BATTERY,MN
ER03X HI WATT 1.5V .MA/H AAA
*** CABLE ASSY
***
810
79096094
6851RP0003N
CABLE ASSY,RF
DVD CABLE ASSY,RCA USING AREA
811
79096073
6611R1G001A
PLUG ASSY
1WAY YELLOW GLOBAL
812
AF000177
6611R2G001A
PLUG ASSY
2WAY RED/WHITE GLOBAL
6711R2N082A
REMOTE CONTROLLER ASSEMBLY
TOSHIBA DVB7021NM TOSHIBA SE-R
*** REMOTE CONTROLLER
900
NSP
79096699
***
*** PANEL ASSEMBLY & TIMER ***
A43
AF000165
3501RF8217A
BOARD ASSEMBLY
DVD DVB7042NDM HA1UTT
280
AF000168
3721R-F810A
PANEL ASSEMBLY,FRONT
DVD DVB7042NDM HA1UTT
452
79097905
353-051A
SCREW
SPECIAL
A42
AF000180
6871R-5705A
PWB(PCB) ASSEMBLY,TOTAL
DVB7042NDM TOSHIBA STEP UP KEY
A49
AF000179
6871R-5704A
PWB(PCB) ASSEMBLY,TOTAL
DVB7042NDM TOSHIBA STEP UP TIM
C902
79097104
0CE1064F638
CAPACITOR,ELECTROLYTIC
10M SRA 16V M FM5 TP(5)
C906
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C907
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C908
79098709
0CE2274C638
CAPACITOR,ELECTROLYTIC
220M SRA 6.3V M FM5 TP(5)
C909
79097109
0CE4764J638
CAPACITOR,AL.ELECTROLYTIC
47UF SRA,SS 35V M FM5 TP 5
C910
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C911
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C912
79097108
0CE4764F638
CAPACITOR,ELECTROLYTIC
47M SRA/SS 16V M FM5 TP(5)
0.1UF 50V Z Y5V(F) 1508 R/TP
C913
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
DIG901
AF000176
6302R-V214A
DIGITRON
6BT-335GNK FUTABA SEG VFD DVD7
DIG901
79096650
6302R-V205A
DIGITRON
HNV-06SC03T SS SDI SEG VFD DVD
DIG901
AF000176
6302RCV205A
DIGITRON
VFD16-0601FN ZEC SEG VFD TTL 1
IC901
AF000155
0IMCRHY070B
IC,MICRO CONTROLLER
HMS81C2012A-HK006 HYNIX 64PIN
IC902
79098739
0IKE704200B
IC,KEC
KIA7042P 3P 4.2V RESET(TAPING)
L901
79091005
6200HJC102A
FILTER(CIRC),EMC
HB-1M2012-102JT CERATECH TP
LED901
79098732
0DL325319AA
LED
SPR325MVWT31 TP ROHM GREEN/RED
Q902
79095001
0TR103009AA
TRANSISTOR
CHIP KRC103S-T1(NC)22-22 KEC
R901
79093049
0RH6800C622
RESISTOR,METAL GLAZED(CHIP)
680 OHM 1 / 16 W 1608 5.00% D
R902
79096690
0RH8200C622
RESISTOR,METAL GLAZED(CHIP)
820 OHM 1 / 16 W 1608 5.00% D
R903
79093031
0RH1201C622
RESISTOR,METAL GLAZED(CHIP)
1.2K OHM 1 / 16 W 1608 5.00% D
R904
79093034
0RH1501C622
RESISTOR,METAL GLAZED(CHIP)
1.5K OHM 1 / 16 W 1608 5.00% D
R905
79093039
0RH2201C622
RESISTOR,METAL GLAZED(CHIP)
2.2K OHM 1 / 16 W 1608 5.00% D
R906
79093042
0RH3301C622
RESISTOR,METAL GLAZED(CHIP)
3.3K OHM 1 / 16 W 1608 5.00% D
R907
79093045
0RH4701C622
RESISTOR,METAL GLAZED(CHIP)
4.7K OHM 1 / 16 W 1608 5.00% D
5-1
ALTERNATE
ALTERNATE
S AL LOCA. NO. TOSHIBA PART LG PART NO. DESCRIPTION
SPECIFICATION
R908
79093029
0RH1002C622
RESISTOR,METAL GLAZED(CHIP)
10K OHM 1 / 16 W 1608 5.00% D
R909
79093029
0RH1002C622
RESISTOR,METAL GLAZED(CHIP)
10K OHM 1 / 16 W 1608 5.00% D
R910
79093042
0RH3301C622
RESISTOR,METAL GLAZED(CHIP)
3.3K OHM 1 / 16 W 1608 5.00% D
R911
79093041
0RH3300C622
RESISTOR,METAL GLAZED(CHIP)
330 OHM 1 / 16 W 1608 5.00% D
R913
79098771
0RH2200C622
RESISTOR,METAL GLAZED(CHIP)
220 OHM 1 / 16 W 1608 5.00% D
R914
79096030
0RH1003C622
RESISTOR,METAL GLAZED(CHIP)
100K OHM 1 / 16 W 1608 5.00% D
R915
79096030
0RH1003C622
RESISTOR,METAL GLAZED(CHIP)
100K OHM 1 / 16 W 1608 5.00% D
R916
79096030
0RH1003C622
RESISTOR,METAL GLAZED(CHIP)
100K OHM 1 / 16 W 1608 5.00% D
R917
79096030
0RH1003C622
RESISTOR,METAL GLAZED(CHIP)
100K OHM 1 / 16 W 1608 5.00% D
R918
79096030
0RH1003C622
RESISTOR,METAL GLAZED(CHIP)
100K OHM 1 / 16 W 1608 5.00% D
R919
79096030
0RH1003C622
RESISTOR,METAL GLAZED(CHIP)
100K OHM 1 / 16 W 1608 5.00% D
R920
79096030
0RH1003C622
RESISTOR,METAL GLAZED(CHIP)
100K OHM 1 / 16 W 1608 5.00% D
R921
79096030
0RH1003C622
RESISTOR,METAL GLAZED(CHIP)
100K OHM 1 / 16 W 1608 5.00% D
R922
79096030
0RH1003C622
RESISTOR,METAL GLAZED(CHIP)
100K OHM 1 / 16 W 1608 5.00% D
R923
79096030
0RH1003C622
RESISTOR,METAL GLAZED(CHIP)
100K OHM 1 / 16 W 1608 5.00% D
R924
79096030
0RH1003C622
RESISTOR,METAL GLAZED(CHIP)
100K OHM 1 / 16 W 1608 5.00% D
R925
79096030
0RH1003C622
RESISTOR,METAL GLAZED(CHIP)
100K OHM 1 / 16 W 1608 5.00% D
R926
79096030
0RH1003C622
RESISTOR,METAL GLAZED(CHIP)
100K OHM 1 / 16 W 1608 5.00% D
R927
79096030
0RH1003C622
RESISTOR,METAL GLAZED(CHIP)
100K OHM 1 / 16 W 1608 5.00% D
R928
79096030
0RH1003C622
RESISTOR,METAL GLAZED(CHIP)
100K OHM 1 / 16 W 1608 5.00% D
R929
79096030
0RH1003C622
RESISTOR,METAL GLAZED(CHIP)
100K OHM 1 / 16 W 1608 5.00% D
R930
79096030
0RH1003C622
RESISTOR,METAL GLAZED(CHIP)
100K OHM 1 / 16 W 1608 5.00% D
R931
79096030
0RH1003C622
RESISTOR,METAL GLAZED(CHIP)
100K OHM 1 / 16 W 1608 5.00% D
R932
79096030
0RH1003C622
RESISTOR,METAL GLAZED(CHIP)
100K OHM 1 / 16 W 1608 5.00% D
R933
79096030
0RH1003C622
RESISTOR,METAL GLAZED(CHIP)
100K OHM 1 / 16 W 1608 5.00% D
R934
79096030
0RH1003C622
RESISTOR,METAL GLAZED(CHIP)
100K OHM 1 / 16 W 1608 5.00% D
R935
79096030
0RH1003C622
RESISTOR,METAL GLAZED(CHIP)
100K OHM 1 / 16 W 1608 5.00% D
R936
79096030
0RH1003C622
RESISTOR,METAL GLAZED(CHIP)
100K OHM 1 / 16 W 1608 5.00% D
R937
79096030
0RH1003C622
RESISTOR,METAL GLAZED(CHIP)
100K OHM 1 / 16 W 1608 5.00% D
R938
79096030
0RH1003C622
RESISTOR,METAL GLAZED(CHIP)
100K OHM 1 / 16 W 1608 5.00% D
R940
79093049
0RH6800C622
RESISTOR,METAL GLAZED(CHIP)
680 OHM 1 / 16 W 1608 5.00% D
R941
79096690
0RH8200C622
RESISTOR,METAL GLAZED(CHIP)
820 OHM 1 / 16 W 1608 5.00% D
R942
79093031
0RH1201C622
RESISTOR,METAL GLAZED(CHIP)
1.2K OHM 1 / 16 W 1608 5.00% D
R943
79093034
0RH1501C622
RESISTOR,METAL GLAZED(CHIP)
1.5K OHM 1 / 16 W 1608 5.00% D
R944
79093039
0RH2201C622
RESISTOR,METAL GLAZED(CHIP)
2.2K OHM 1 / 16 W 1608 5.00% D
R945
79093020
0RH0000C622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 16 W 1608 5.00% D
R946
79093042
0RH3301C622
RESISTOR,METAL GLAZED(CHIP)
3.3K OHM 1 / 16 W 1608 5.00% D
R947
79093045
0RH4701C622
RESISTOR,METAL GLAZED(CHIP)
4.7K OHM 1 / 16 W 1608 5.00% D
R948
79096480
0RH8201C622
RESISTOR,METAL GLAZED(CHIP)
8.2K OHM 1 / 16 W 1608 5.00% D
R952
79093027
0RH1000C622
RESISTOR,METAL GLAZED(CHIP)
100 OHM 1 / 16 W 1608 5.00% D
RC901
79096647
6712R1038GA
REMOTE CONTROLLER RECEIVER
TSOP2438SB1 VISHAY 38KHZ 10.2M
SW901
79097338
556-219B
SWITCH,TACT
THVV502GAA POSTECH DC 12 V 5-
SW902
79097338
556-219B
SWITCH,TACT
THVV502GAA POSTECH DC 12 V 5-
SW903
79097338
556-219B
SWITCH,TACT
THVV502GAA POSTECH DC 12 V 5-
SW904
79097338
556-219B
SWITCH,TACT
THVV502GAA POSTECH DC 12 V 5-
SW905
79097338
556-219B
SWITCH,TACT
THVV502GAA POSTECH DC 12 V 5-
SW906
79097338
556-219B
SWITCH,TACT
THVV502GAA POSTECH DC 12 V 5-
SW907
79097338
556-219B
SWITCH,TACT
THVV502GAA POSTECH DC 12 V 5-
SW908
79097338
556-219B
SWITCH,TACT
THVV502GAA POSTECH DC 12 V 5-
SW909
79097338
556-219B
SWITCH,TACT
THVV502GAA POSTECH DC 12 V 5-
SW910
79097338
556-219B
SWITCH,TACT
THVV502GAA POSTECH DC 12 V 5-
SW911
79097338
556-219B
SWITCH,TACT
THVV502GAA POSTECH DC 12 V 5-
SW950
79098796
6600RRB003A
SWITCH,TACT
SKQUAA ALPS DC 12 V 50 MA VER
X901
79097349
6212BA3004A
RESONATOR,CERAMIC
CSTLS6M00G53-A0 MURATA 6MHZ +/
REMARKS
*** CHASSIS ASSEMBLY ***
A44
AF000164
3141R-D011U
CHASSIS ASSEMBLY
DVB7042NDM MTK 55MM
260
79096705
3140R-D002A
CHASSIS
DV7000 PRESS MAIN
261
79096653
5040R-0069D
RUBBER
FOOT(SILICONE SPONGE DS-08 T=
320
AF000167
3720R-D085U
PANEL,VIDEO
DVD DVB7042NDM PRESS MTK 55MM
467
79097904
353-046N
SCREW,DRAWING
SPECIAL(3X8 BK.)
5-2
NSP
S AL LOCA. NO. TOSHIBA PART LG PART NO. DESCRIPTION
*** DECK ASSEMBLY
SPECIFICATION
REMARKS
***
A00
79096645
6721RH0370A
DECK ASSEMBLY,VIDEO
DECK/MECHA DP-7(55) MITSUMI GO
A01
AF000173
4861R-0016B
CLAMP ASSEMBLY
DISC DP7 - SH
NSP
A02
79096682
3041R-M003B
BASE ASSEMBLY
MAIN(DP-7R) - SH
A03
AF000163
3041R-M002B
BASE ASSEMBLY
SLED DP7(MIT 502W-GOLD) - SH
001
79097006
3300R-0547A
PLATE
CLAMP
002
79097007
5016H-1016B
MAGNET
CLAMP(LDM-R608,10*5,1*1.5T)
NSP
003
AF000069
4860R-0021A
CLAMP
UPPER DP7
NSP
004
79096657
4930R-0365A
HOLDER
CLAMP DP7
010
79096644
6850R-GF10B
CABLE,FLAT
P=1.0 FFC UL2896(0.05X0.65) 6
NSP
011
7909680
3210R-M001A
FRAME
UP/DOWN DP7 MOLD
011A
79096643
6850R-JW24Y
CABLE,FLAT
P=1.0 FFC UL2896(0.035X0.7) 23
012
79096652
5040R-0075B
RUBBER
DAMPER DP7 (CHUNG PUNG 30)
012
AF000076
5040R-0075D
RUBBER
DAMPER DP7 (YAMAUCHI 30)
ALTERNATE
012
AF000174
5040R-0075F
RUBBER
DAMPER DP7 (JAE IL 30)
ALTERNATE
013
79096669
4400H-1009A
BELT
GM-RT1332A
014
79096235
4470R-0055A
GEAR
PULLEY
015
79096638
6871R-9248B
PWB(PCB) ASSEMBLY,TOTAL
DP7 LOADING - SH
015A
79096660
4681R-A003B
MOTOR ASSEMBLY
LOADING DP7 - SH
015B
79096516
4560R-0008A
PULLEY
MOTOR
015C
79096662
4680R-E007A
MOTOR(MECH)
FEEDING BCZ3B01 SANKYO FOR DVD
015C
79096661
4680R-E008A
MOTOR(MECH)
FEEDING RF-300EA-1D390 MABUCHI
017
79096236
4470R-0056A
GEAR
LOADING
018
79096656
4974R-0046A
GUIDE
UP/DOWN(DP-7)
020
AF000162
3040R-M004A
BASE
MAIN(DP7-55MM) MOLD
021
79096663
4680R-C010A
MOTOR(MECH)
SPINDLE JCL9B78 SANKYO FOR DVD
022
79096659
4681R-B005B
MOTOR ASSEMBLY
FEEDING DP7 - SH
022A
79096662
4680R-E007A
MOTOR(MECH)
FEEDING BCZ3B01 SANKYO FOR DVD
022A
79096661
4680R-E008A
MOTOR(MECH)
FEEDING RF-300EA-1D390 MABUCHI
023
79096668
4470R-0119A
GEAR
FEED MOTOR
024
79096665
4470R-0124A
GEAR
PINION DP7
024A
79096654
5006R-0040A
CAP
SKEW (T) DP7
024B
79096655
5006R-0039A
CAP
SKEW (R) DP7
025
79096667
4470R-0122A
GEAR
MIDDLE A DP7
026
79096679
3390R-0015A
TRAY
DISC DP7
027
79096666
4470R-0123A
GEAR
MIDDLE B DP7
028
79096670
4370R-0083A
SHAFT
DECK/MECHA DP7 OTHER PU-T
029
79096671
4370R-0075A
SHAFT
PU
030
79096664
4471R-0010A
GEAR ASSEMBLY
RACK DP7
031
79096646
6716DPH005A
PICK UP,DVD
PVR-502W MITSUMI PLAYER H/HIGH
032
79096639
6871R-9243B
PWB(PCB) ASSEMBLY,TOTAL
DP7 FEEDING - SH
430
79096686
1SZZR-0046A
SCREW,DRAWING
+ 1 D2.0 L6.0 SWRCH16A/FZY
431
79096220
1SZZH-1007B
SCREW,DRAWING
+ D2.0 6MM SWRCH16A/ZNBK 4MM 1
433
79096541
1SZZR-0050A
SCREW,DRAWING
+ 1 D2.0 L4.5 SWRCH16A/ZNY S-T
434
79096687
1SZZR-0023B
SCREW,DRAWING
+ 1 D1.7 L6.0 SWRCH16A/FZY RAC
435
79097902
1SZZR-0011A
SCREW,
MACHINE
436
79096685
1SZZR-0047A
SCREW,DRAWING
+ 1 D1.4 L4.5 SWRCH16A/FZY TAP
ALTERNATE
NSP
*** SUB PWB(PCB) ASSEMBLY ***
A46
AF000183
6885R-1012U
SUB PWB(PCB) ASSEMBLY
DVB7042NDM HA1UTT 55(U),53(S),
SD-4900-S-TU
A46
AF000182
6885R-1012T
SUB PWB(PCB) ASSEMBLY
DVB7042NDM HA1CTT
SD-4900-S-TC
C201
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C202
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C203
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C206
79098705
0CE1074F638
CAPACITOR,ELECTROLYTIC
100U SRA 16V M FM5 TP(5)
C207
79097108
0CE4764F638
CAPACITOR,ELECTROLYTIC
47M SRA/SS 16V M FM5 TP(5)
C208
79097108
0CE4764F638
CAPACITOR,ELECTROLYTIC
47M SRA/SS 16V M FM5 TP(5)
C211
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C212
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C213
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C214
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C231
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
5-3
S AL LOCA. NO. TOSHIBA PART LG PART NO. DESCRIPTION
SPECIFICATION
C232
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C233
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C234
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C239
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C240
79096609
0CH1153K562
CAPACITOR,FIXED CERAMIC(Temp.c
0.015UF 50V 10% X7R(X) 1608 R/
C241
79097108
0CE4764F638
CAPACITOR,ELECTROLYTIC
47M SRA/SS 16V M FM5 TP(5)
C243
79096595
0CH4561K412
CAPACITOR,FIXED CERAMIC(High d
560PF 50V 5% NP0 1608 R/TP
C244
79096595
0CH4561K412
CAPACITOR,FIXED CERAMIC(High d
560PF 50V 5% NP0 1608 R/TP
C245
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C251
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C252
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C253
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C254
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C255
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C257
79098715
0CH1105D942
CAPACITOR,CHIP[CERAMIC M/L HD
1UF 10V Z Y5V(F) 1508 R/TP
C258
79098715
0CH1105D942
CAPACITOR,CHIP[CERAMIC M/L HD
1UF 10V Z Y5V(F) 1508 R/TP
C259
79098715
0CH1105D942
CAPACITOR,CHIP[CERAMIC M/L HD
1UF 10V Z Y5V(F) 1508 R/TP
C260
79098715
0CH1105D942
CAPACITOR,CHIP[CERAMIC M/L HD
1UF 10V Z Y5V(F) 1508 R/TP
C261
79098715
0CH1105D942
CAPACITOR,CHIP[CERAMIC M/L HD
1UF 10V Z Y5V(F) 1508 R/TP
C262
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C263
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C264
79096609
0CH1153K562
CAPACITOR,FIXED CERAMIC(Temp.c
0.015UF 50V 10% X7R(X) 1608 R/
C265
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C266
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C267
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C268
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C269
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C270
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C271
79096598
0CH4391K412
CAPACITOR,CHIP[CERAMIC M/L TC
390PF 50V J NP0 1508 R/TP
C272
79096598
0CH4391K412
CAPACITOR,CHIP[CERAMIC M/L TC
390PF 50V J NP0 1508 R/TP
C273
79092019
0CH1333K562
CAPACITOR,CHIP[CERAMIC M/L HD
0.033UF 50V K X7R(X) 1508 R/TP
C274
79096596
0CH4471K412
CAPACITOR,CHIP[CERAMIC M/L TC
470PF 50V J NP0 1508 R/TP
C276
79092023
0CH4100K112
CHIP CAPA CERAMIC M/L T.C F/S
10P 50V D COG 1.6X0.8 R/TP
C277
79096609
0CH1153K562
CAPACITOR,FIXED CERAMIC(Temp.c
0.015UF 50V 10% X7R(X) 1608 R/
C278
79098721
0CH4270K412
CAPACITOR,CHIP[CERAMIC M/L TC
27PF 50V J NP0 1608 R/TP
C279
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C280
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C281
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C282
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C283
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C291
79098705
0CE1074F638
CAPACITOR,ELECTROLYTIC
100U SRA 16V M FM5 TP(5)
C292
79097108
0CE4764F638
CAPACITOR,ELECTROLYTIC
47M SRA/SS 16V M FM5 TP(5)
C293
79097108
0CE4764F638
CAPACITOR,ELECTROLYTIC
47M SRA/SS 16V M FM5 TP(5)
C295
79097104
0CE1064F638
CAPACITOR,ELECTROLYTIC
10M SRA 16V M FM5 TP(5)
C2A1
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C2A2
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C502
79092013
0CH1103K562
CAPACITOR,FIXED CERAMIC(Temp.c
0.01UF 50V 10% X7R(X) 1608 R/T
C503
79092013
0CH1103K562
CAPACITOR,FIXED CERAMIC(Temp.c
0.01UF 50V 10% X7R(X) 1608 R/T
C504
79092013
0CH1103K562
CAPACITOR,FIXED CERAMIC(Temp.c
0.01UF 50V 10% X7R(X) 1608 R/T
C505
79092013
0CH1103K562
CAPACITOR,FIXED CERAMIC(Temp.c
0.01UF 50V 10% X7R(X) 1608 R/T
C506
79097121
0CH4101K412
CHIP CAPA CERAMIC M/L T.C F/S
100P 50V J COG 1.6X0.8 R/TP
C507
79092013
0CH1103K562
CAPACITOR,FIXED CERAMIC(Temp.c
0.01UF 50V 10% X7R(X) 1608 R/T
C508
79092018
0CH1225F944
CAPACITOR,FIXED CERAMIC(Temp.c
2.2UF 16V 80%,-20% Y5V(F) 3216
C509
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C510
79097121
0CH4101K412
CHIP CAPA CERAMIC M/L T.C F/S
100P 50V J COG 1.6X0.8 R/TP
C511
79097108
0CE4764F638
CAPACITOR,ELECTROLYTIC
47M SRA/SS 16V M FM5 TP(5)
C513
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C514
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C515
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C516
79092018
0CH1225F944
CAPACITOR,FIXED CERAMIC(Temp.c
2.2UF 16V 80%,-20% Y5V(F) 3216
C517
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
5-4
REMARKS
S AL LOCA. NO. TOSHIBA PART LG PART NO. DESCRIPTION
SPECIFICATION
C518
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C519
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C520
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C521
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C522
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C523
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C524
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C525
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C526
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C527
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C528
79097108
0CE4764F638
CAPACITOR,ELECTROLYTIC
47M SRA/SS 16V M FM5 TP(5)
C530
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C531
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C532
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C533
79098720
0CH4180K412
CAPACITOR,CHIP[CERAMIC M/L TC
18P 50V J COG 1.6X0.8 R/TP
C534
79092026
0CH4330K412
CAPACITOR,CHIP[CERAMIC M/L TC
33P 50V J COG 1.6X0.8 R/TP
C535
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C536
79098714
0CH1102K562
CAPACITOR,FIXED CERAMIC(Temp.c
1000PF 50V 10% X7R(X) 1608 R/T
C537
79098714
0CH1102K562
CAPACITOR,FIXED CERAMIC(Temp.c
1000PF 50V 10% X7R(X) 1608 R/T
C538
79098714
0CH1102K562
CAPACITOR,FIXED CERAMIC(Temp.c
1000PF 50V 10% X7R(X) 1608 R/T
C539
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C540
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C541
79097104
0CE1064F638
CAPACITOR,ELECTROLYTIC
10M SRA 16V M FM5 TP(5)
C542
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C543
79097104
0CE1064F638
CAPACITOR,ELECTROLYTIC
10M SRA 16V M FM5 TP(5)
C544
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C545
79097104
0CE1064F638
CAPACITOR,ELECTROLYTIC
10M SRA 16V M FM5 TP(5)
C554
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C556
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C557
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C558
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C559
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C560
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C561
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C563
79098709
0CE2274C638
CAPACITOR,ELECTROLYTIC
220M SRA 6.3V M FM5 TP(5)
C564
79098709
0CE2274C638
CAPACITOR,ELECTROLYTIC
220M SRA 6.3V M FM5 TP(5)
C565
79092025
0CH4221K412
CAPACITOR,CHIP[CERAMIC M/L TC
220P 50V J COG 1.6X0.8 R/TP
C566
79092025
0CH4221K412
CAPACITOR,CHIP[CERAMIC M/L TC
220P 50V J COG 1.6X0.8 R/TP
C567
79092025
0CH4221K412
CAPACITOR,CHIP[CERAMIC M/L TC
220P 50V J COG 1.6X0.8 R/TP
C568
79092025
0CH4221K412
CAPACITOR,CHIP[CERAMIC M/L TC
220P 50V J COG 1.6X0.8 R/TP
C569
79092025
0CH4221K412
CAPACITOR,CHIP[CERAMIC M/L TC
220P 50V J COG 1.6X0.8 R/TP
C575
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C576
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C577
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C578
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C579
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C580
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C581
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C582
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C583
79098709
0CE2274C638
CAPACITOR,ELECTROLYTIC
220M SRA 6.3V M FM5 TP(5)
C589
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C592
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C596
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C597
79096155
0CH4470K412
CAPA,CHIP CERAMIC M/L T.C F/S
47P 50V J COG 1.6X0.8 R/TP
C5A1
79097104
0CE1064F638
CAPACITOR,ELECTROLYTIC
10M SRA 16V M FM5 TP(5)
C5A2
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C5A3
79092025
0CH4221K412
CAPACITOR,CHIP[CERAMIC M/L TC
220P 50V J COG 1.6X0.8 R/TP
C5A4
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C5A5
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C5A6
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C5A7
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
5-5
REMARKS
S AL LOCA. NO. TOSHIBA PART LG PART NO. DESCRIPTION
SPECIFICATION
C5A8
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C5A9
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C5D1
79098709
0CE2274C638
CAPACITOR,ELECTROLYTIC
220M SRA 6.3V M FM5 TP(5)
C600
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C601
79097108
0CE4764F638
CAPACITOR,ELECTROLYTIC
47M SRA/SS 16V M FM5 TP(5)
C603
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C604
79098715
0CH1105D942
CAPACITOR,CHIP[CERAMIC M/L HD
1UF 10V Z Y5V(F) 1508 R/TP
C605
79098715
0CH1105D942
CAPACITOR,CHIP[CERAMIC M/L HD
1UF 10V Z Y5V(F) 1508 R/TP
C606
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C607
79097106
0CE2264F638
CAPACITOR,ELECTROLYTIC
22M SRA 16V M FM5 TP(5)
C608
79097106
0CE2264F638
CAPACITOR,ELECTROLYTIC
22M SRA 16V M FM5 TP(5)
C609
79098714
0CH1102K562
CAPACITOR,FIXED CERAMIC(Temp.c
1000PF 50V 10% X7R(X) 1608 R/T
C610
79098722
0CH4271K412
CAPACITOR,FIXED CERAMIC(HIGH D
270PF 50V 5% NP0 1608 R/TP
C611
79098722
0CH4271K412
CAPACITOR,FIXED CERAMIC(HIGH D
270PF 50V 5% NP0 1608 R/TP
C612
79097106
0CE2264F638
CAPACITOR,ELECTROLYTIC
22M SRA 16V M FM5 TP(5)
C613
79098722
0CH4271K412
CAPACITOR,FIXED CERAMIC(HIGH D
270PF 50V 5% NP0 1608 R/TP
C614
79098722
0CH4271K412
CAPACITOR,FIXED CERAMIC(HIGH D
270PF 50V 5% NP0 1608 R/TP
C615
79098714
0CH1102K562
CAPACITOR,FIXED CERAMIC(Temp.c
1000PF 50V 10% X7R(X) 1608 R/T
C616
79097106
0CE2264F638
CAPACITOR,ELECTROLYTIC
22M SRA 16V M FM5 TP(5)
C617
79097106
0CE2264F638
CAPACITOR,ELECTROLYTIC
22M SRA 16V M FM5 TP(5)
C618
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C619
79098705
0CE1074F638
CAPACITOR,ELECTROLYTIC
100U SRA 16V M FM5 TP(5)
C620
79097106
0CE2264F638
CAPACITOR,ELECTROLYTIC
22M SRA 16V M FM5 TP(5)
C621
79097106
0CE2264F638
CAPACITOR,ELECTROLYTIC
22M SRA 16V M FM5 TP(5)
C622
79097106
0CE2264F638
CAPACITOR,ELECTROLYTIC
22M SRA 16V M FM5 TP(5)
C623
79098718
0CH1392K562
CAPACITOR,FIXED CERAMIC(Temp.c
3900PF 50V K Z5U(E) 1608 R/TP
C624
79098718
0CH1392K562
CAPACITOR,FIXED CERAMIC(Temp.c
3900PF 50V K Z5U(E) 1608 R/TP
C628
79098702
0CE1054K638
CAPACITOR,ELECTROLYTIC
1.0M SRA/SS50V M FM5 TP(5)
C629
79098702
0CE1054K638
CAPACITOR,ELECTROLYTIC
1.0M SRA/SS50V M FM5 TP(5)
C630
79098702
0CE1054K638
CAPACITOR,ELECTROLYTIC
1.0M SRA/SS50V M FM5 TP(5)
C631
79098702
0CE1054K638
CAPACITOR,ELECTROLYTIC
1.0M SRA/SS50V M FM5 TP(5)
C632
79098702
0CE1054K638
CAPACITOR,ELECTROLYTIC
1.0M SRA/SS50V M FM5 TP(5)
C633
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C634
79097106
0CE2264F638
CAPACITOR,ELECTROLYTIC
22M SRA 16V M FM5 TP(5)
C635
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C636
79097108
0CE4764F638
CAPACITOR,ELECTROLYTIC
47M SRA/SS 16V M FM5 TP(5)
C643
79098702
0CE1054K638
CAPACITOR,ELECTROLYTIC
1.0M SRA/SS50V M FM5 TP(5)
C647
79098706
0CE1086C638
CAPACITOR,FIXED ELECTROLYTIC
1000000000 PF SMS,SG 6.3V M FM
C651
79098706
0CE1086C638
CAPACITOR,FIXED ELECTROLYTIC
1000000000 PF SMS,SG 6.3V M FM
C655
79098706
0CE1086C638
CAPACITOR,FIXED ELECTROLYTIC
1000000000 PF SMS,SG 6.3V M FM
C659
79096020
0CE4775C638
CAPACITOR,FIXED ELECTROLYTIC
470UF SR,SV 6.3V 20% FM5 TP 5
C659
79098713
0CE477CC618
CAPACITOR,FIXED ELECTROLYTIC
470UF SHL,SD 6.3V 20% TP 5 FL
C663
79096020
0CE4775C638
CAPACITOR,FIXED ELECTROLYTIC
470UF SR,SV 6.3V 20% FM5 TP 5
C663
79098713
0CE477CC618
CAPACITOR,FIXED ELECTROLYTIC
470UF SHL,SD 6.3V 20% TP 5 FL
C673
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C674
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C675
79098705
0CE1074F638
CAPACITOR,ELECTROLYTIC
100U SRA 16V M FM5 TP(5)
C676
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C677
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C678
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C679
79098709
0CE2274C638
CAPACITOR,ELECTROLYTIC
220M SRA 6.3V M FM5 TP(5)
C680
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C681
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C682
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C683
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C690
79098709
0CE2274C638
CAPACITOR,ELECTROLYTIC
220M SRA 6.3V M FM5 TP(5)
C691
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C6A1
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C6A2
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C6A3
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C6W1
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
5-6
REMARKS
S AL LOCA. NO. TOSHIBA PART LG PART NO. DESCRIPTION
SPECIFICATION
C6W2
79092014
0CH1104K942
CAPACITOR,CHIP[CERAMIC M/L HD
0.1UF 50V Z Y5V(F) 1508 R/TP
C6W3
79097104
0CE1064F638
CAPACITOR,ELECTROLYTIC
10M SRA 16V M FM5 TP(5)
C6W4
79097121
0CH4101K412
CHIP CAPA CERAMIC M/L T.C F/S
100P 50V J COG 1.6X0.8 R/TP
C6W5
79098721
0CH4270K412
CAPACITOR,CHIP[CERAMIC M/L TC
27PF 50V J NP0 1608 R/TP
C6W6
79097121
0CH4101K412
CHIP CAPA CERAMIC M/L T.C F/S
100P 50V J COG 1.6X0.8 R/TP
D600
79096310
0DSRM00118A
DIODE,SWITCHING
DAP202K T146 ROHM R/TP SMD 80V
D670
79096023
0DR104009BA
DIODE,RECTIFIER
RL104F TP RECTRON NON 400V 1A
F600
79096503
6200JB8010V
FILTER(CIRC),EMC
LFA20-2A1E473MT MITSUBISHI MAT
IC201
79096585
0ILNRNF006A
IC,LINEAR
MT1336E MEDIATEK INCORPORATION
IC202
79096576
0IPRPSA010A
IC,PERIPHERALS
LA6560-A-TE-L SANYO HSOP-36R R
IC501
AF000154
0ILNRNF008B
IC,LINEAR
MT1379EEC MEDIATEK INCORPORATI
IC505
79096693
0ISS240210A
IC,SAMSUNG ELECTRONICS
S524A40X21-SCT0 SOP8 TP EEPROM
IC506
AF000156
0IMMRII006A
IC,MEMORIES
IS42S16400A-7T INTEGRATED SILI
IC510
79097140
0IFA742440F
IC,FAIRCHILD
MM74HCT244SJ 20P SOIC TP 3-STA
IC601
AF000159
0IPRPCI003C
IC,PERIPHERALS
CS4391A-KZR CIRRUS LOGIC 20PIN
IC601
79098755
0IPRPCI003B
IC,PERIPHERALS
CS4391-KZR CIRRUS LOGIC 20 TSS
IC602
79098737
0IJR458000B
IC,JRC
NJM4580M 8,DMP8 TP OP AMP 2K/R
MM1623XFBE MITSUMI 28PIN SOP R
IC604
79096577
0IPRPMT008A
IC,PERIPHERALS
JK601
79096649
6612JH003KC
JACK,RCA
RCA/DIN-150(SILVER) YUQIU
JK602
AF000087
6612K00003B
JACK,FIBER OPTIC
PLT131/T5/12(12MBPS) EVERLIGHT
JK602
79096076
6612K00003A
JACK,FIBER OPTIC
PLT131/T5/6 EVERLIGHT PUSH TYP
L201
79096571
0LR0102J025
INDUCTOR,RADIAL LEAD
10UH 5% 4X5 TR5
L202
79091005
6200HJC102A
FILTER(CIRC),EMC
HB-1M2012-102JT CERATECH TP
L203
79096571
0LR0102J025
INDUCTOR,RADIAL LEAD
10UH 5% 4X5 TR5
L204
79091005
6200HJC102A
FILTER(CIRC),EMC
HB-1M2012-102JT CERATECH TP
L231
79091005
6200HJC102A
FILTER(CIRC),EMC
HB-1M2012-102JT CERATECH TP
L251
79091005
6200HJC102A
FILTER(CIRC),EMC
HB-1M2012-102JT CERATECH TP
L501
79091005
6200HJC102A
FILTER(CIRC),EMC
HB-1M2012-102JT CERATECH TP
L502
79091005
6200HJC102A
FILTER(CIRC),EMC
HB-1M2012-102JT CERATECH TP
L504
79091005
6200HJC102A
FILTER(CIRC),EMC
HB-1M2012-102JT CERATECH TP
L510
79091005
6200HJC102A
FILTER(CIRC),EMC
HB-1M2012-102JT CERATECH TP
L600
79091005
6200HJC102A
FILTER(CIRC),EMC
HB-1M2012-102JT CERATECH TP
L601
79091005
6200HJC102A
FILTER(CIRC),EMC
HB-1M2012-102JT CERATECH TP
L602
79091005
6200HJC102A
FILTER(CIRC),EMC
HB-1M2012-102JT CERATECH TP
L673
79091005
6200HJC102A
FILTER(CIRC),EMC
HB-1M2012-102JT CERATECH TP
L674
79091005
6200HJC102A
FILTER(CIRC),EMC
HB-1M2012-102JT CERATECH TP
L690
79091005
6200HJC102A
FILTER(CIRC),EMC
HB-1M2012-102JT CERATECH TP
Q201
79095008
0TR387509AC
TRANSISTOR
CHIP KTC3875S-GR-T1(ALG) KEC
Q202
79096542
0TRRH80042A
TRANSISTOR,BIPOLARS
2SK3018 T106 ROHM KOREA R/TP U
Q203
79096542
0TRRH80042A
TRANSISTOR,BIPOLARS
2SK3018 T106 ROHM KOREA R/TP U
Q204
79095002
0TR103709BB
TRANSISTOR,BIPOLARS
2SA1037K-Q CHIP TP ROHM - -
Q205
79095002
0TR103709BB
TRANSISTOR,BIPOLARS
2SA1037K-Q CHIP TP ROHM - -
Q501
79095008
0TR387509AC
TRANSISTOR
CHIP KTC3875S-GR-T1(ALG) KEC
Q600
79095002
0TR103709BB
TRANSISTOR,BIPOLARS
2SA1037K-Q CHIP TP ROHM - -
Q601
79096031
0TR103009AC
TRANSISTOR
KRA103S-T1(PC)22-22 CHIP KEC
Q602
79096031
0TR103009AC
TRANSISTOR
KRA103S-T1(PC)22-22 CHIP KEC
Q603
79095008
0TR387509AC
TRANSISTOR
CHIP KTC3875S-GR-T1(ALG) KEC
Q604
79095008
0TR387509AC
TRANSISTOR
CHIP KTC3875S-GR-T1(ALG) KEC
Q605
79095008
0TR387509AC
TRANSISTOR
CHIP KTC3875S-GR-T1(ALG) KEC
Q606
79095008
0TR387509AC
TRANSISTOR
CHIP KTC3875S-GR-T1(ALG) KEC
R201
79093029
0RH1002C622
RESISTOR,METAL GLAZED(CHIP)
10K OHM 1 / 16 W 1608 5.00% D
R202
79096030
0RH1003C622
RESISTOR,METAL GLAZED(CHIP)
100K OHM 1 / 16 W 1608 5.00% D
R203
79093029
0RH1002C622
RESISTOR,METAL GLAZED(CHIP)
10K OHM 1 / 16 W 1608 5.00% D
R204
79096030
0RH1003C622
RESISTOR,METAL GLAZED(CHIP)
100K OHM 1 / 16 W 1608 5.00% D
R205
79096563
0RH0272C622
RESISTOR,METAL GLAZED(CHIP)
27 OHM 1 / 16 W 1608 5.00% D
R206
79096563
0RH0272C622
RESISTOR,METAL GLAZED(CHIP)
27 OHM 1 / 16 W 1608 5.00% D
R207
79093020
0RH0000C622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 16 W 1608 5.00% D
R208
79093020
0RH0000C622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 16 W 1608 5.00% D
R209
79093020
0RH0000C622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 16 W 1608 5.00% D
R210
79093020
0RH0000C622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 16 W 1608 5.00% D
R211
79096564
0RH0221C622
RESISTOR,METAL GLAZED(CHIP)
2.2 OHM 1 / 16 W 1608 5.00% D
5-7
REMARKS
S AL LOCA. NO. TOSHIBA PART LG PART NO. DESCRIPTION
SPECIFICATION
R212
79096547
0RJ7503C677
RESISTOR,METAL GLAZED(CHIP)
750K OHM 1/16 W 5% 1608 R/TP
R213
79096553
0RH3903C622
RESISTOR,METAL GLAZED(CHIP)
390K OHM 1 / 16 W 1608 5.00% D
R214
79096547
0RJ7503C677
RESISTOR,METAL GLAZED(CHIP)
750K OHM 1/16 W 5% 1608 R/TP
R215
79096553
0RH3903C622
RESISTOR,METAL GLAZED(CHIP)
390K OHM 1 / 16 W 1608 5.00% D
R216
79096565
0RH0101C622
RESISTOR,METAL GLAZED(CHIP)
1 OHM 1 / 16 W 1608 5.00% D
R217
79096564
0RH0221C622
RESISTOR,METAL GLAZED(CHIP)
2.2 OHM 1 / 16 W 1608 5.00% D
R218
79096564
0RH0221C622
RESISTOR,METAL GLAZED(CHIP)
2.2 OHM 1 / 16 W 1608 5.00% D
R220
79096563
0RH0272C622
RESISTOR,METAL GLAZED(CHIP)
27 OHM 1 / 16 W 1608 5.00% D
R221
79096563
0RH0272C622
RESISTOR,METAL GLAZED(CHIP)
27 OHM 1 / 16 W 1608 5.00% D
R231
79093039
0RH2201C622
RESISTOR,METAL GLAZED(CHIP)
2.2K OHM 1 / 16 W 1608 5.00% D
R232
79093039
0RH2201C622
RESISTOR,METAL GLAZED(CHIP)
2.2K OHM 1 / 16 W 1608 5.00% D
R233
79096564
0RH0221C622
RESISTOR,METAL GLAZED(CHIP)
2.2 OHM 1 / 16 W 1608 5.00% D
R234
79096564
0RH0221C622
RESISTOR,METAL GLAZED(CHIP)
2.2 OHM 1 / 16 W 1608 5.00% D
R235
79093029
0RH1002C622
RESISTOR,METAL GLAZED(CHIP)
10K OHM 1 / 16 W 1608 5.00% D
R236
79093035
0RH1502C622
RESISTOR,METAL GLAZED(CHIP)
15K OHM 1 / 16 W 1608 5.00% D
R237
79096557
0RH2702C622
RESISTOR,METAL GLAZED(CHIP)
27K OHM 1 / 16 W 1608 5.00% D
R238
79093029
0RH1002C622
RESISTOR,METAL GLAZED(CHIP)
10K OHM 1 / 16 W 1608 5.00% D
R239
79093029
0RH1002C622
RESISTOR,METAL GLAZED(CHIP)
10K OHM 1 / 16 W 1608 5.00% D
R240
79093029
0RH1002C622
RESISTOR,METAL GLAZED(CHIP)
10K OHM 1 / 16 W 1608 5.00% D
R241
79093029
0RH1002C622
RESISTOR,METAL GLAZED(CHIP)
10K OHM 1 / 16 W 1608 5.00% D
R242
79096557
0RH2702C622
RESISTOR,METAL GLAZED(CHIP)
27K OHM 1 / 16 W 1608 5.00% D
R243
79093029
0RH1002C622
RESISTOR,METAL GLAZED(CHIP)
10K OHM 1 / 16 W 1608 5.00% D
R244
79093035
0RH1502C622
RESISTOR,METAL GLAZED(CHIP)
15K OHM 1 / 16 W 1608 5.00% D
R245
79093029
0RH1002C622
RESISTOR,METAL GLAZED(CHIP)
10K OHM 1 / 16 W 1608 5.00% D
R246
79093029
0RH1002C622
RESISTOR,METAL GLAZED(CHIP)
10K OHM 1 / 16 W 1608 5.00% D
R251
79096215
0RH3302C622
RESISTOR,METAL GLAZED(CHIP)
33K OHM 1 / 16 W 1608 5.00% D
R252
79096030
0RH1003C622
RESISTOR,METAL GLAZED(CHIP)
100K OHM 1 / 16 W 1608 5.00% D
R253
79096557
0RH2702C622
RESISTOR,METAL GLAZED(CHIP)
27K OHM 1 / 16 W 1608 5.00% D
R254
79093020
0RH0000C622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 16 W 1608 5.00% D
R255
79093020
0RH0000C622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 16 W 1608 5.00% D
R256
79093029
0RH1002C622
RESISTOR,METAL GLAZED(CHIP)
10K OHM 1 / 16 W 1608 5.00% D
R257
79093029
0RH1002C622
RESISTOR,METAL GLAZED(CHIP)
10K OHM 1 / 16 W 1608 5.00% D
R258
79093020
0RH0000C622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 16 W 1608 5.00% D
R259
79093020
0RH0000C622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 16 W 1608 5.00% D
R501
79096480
0RH8201C622
RESISTOR,METAL GLAZED(CHIP)
8.2K OHM 1 / 16 W 1608 5.00% D
R502
79096547
0RJ7503C677
RESISTOR,METAL GLAZED(CHIP)
750K OHM 1/16 W 5% 1608 R/TP
R503
79093024
0RH0471C622
RESISTOR,METAL GLAZED(CHIP)
4.7 OHM 1 / 16 W 1608 5.00% D
R504
79093020
0RH0000C622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 16 W 1608 5.00% D
R505
79093024
0RH0471C622
RESISTOR,METAL GLAZED(CHIP)
4.7 OHM 1 / 16 W 1608 5.00% D
R506
79093024
0RH0471C622
RESISTOR,METAL GLAZED(CHIP)
4.7 OHM 1 / 16 W 1608 5.00% D
R507
79098770
0RH1801C622
RESISTOR,METAL GLAZED(CHIP)
1.8K OHM 1 / 16 W 1608 5.00% D
R508
79096030
0RH1003C622
RESISTOR,METAL GLAZED(CHIP)
100K OHM 1 / 16 W 1608 5.00% D
R509
79093020
0RH0000C622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 16 W 1608 5.00% D
R510
79093020
0RH0000C622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 16 W 1608 5.00% D
R511
79093037
0RH1802C622
RESISTOR,METAL GLAZED(CHIP)
18K OHM 1 / 16 W 1608 5.00% D
R512
79096030
0RH1003C622
RESISTOR,METAL GLAZED(CHIP)
100K OHM 1 / 16 W 1608 5.00% D
R513
79093020
0RH0000C622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 16 W 1608 5.00% D
R515
AF000119
0RH0332C622
RESISTOR,METAL GLAZED(CHIP)
33 OHM 1 / 16 W 1608 5.00% D
R516
AF000119
0RH0332C622
RESISTOR,METAL GLAZED(CHIP)
33 OHM 1 / 16 W 1608 5.00% D
R517
AF000119
0RH0332C622
RESISTOR,METAL GLAZED(CHIP)
33 OHM 1 / 16 W 1608 5.00% D
R518
AF000119
0RH0332C622
RESISTOR,METAL GLAZED(CHIP)
33 OHM 1 / 16 W 1608 5.00% D
R519
AF000119
0RH0332C622
RESISTOR,METAL GLAZED(CHIP)
33 OHM 1 / 16 W 1608 5.00% D
R520
AF000119
0RH0332C622
RESISTOR,METAL GLAZED(CHIP)
33 OHM 1 / 16 W 1608 5.00% D
R521
AF000119
0RH0332C622
RESISTOR,METAL GLAZED(CHIP)
33 OHM 1 / 16 W 1608 5.00% D
R522
AF000119
0RH0332C622
RESISTOR,METAL GLAZED(CHIP)
33 OHM 1 / 16 W 1608 5.00% D
R523
79093031
0RH1201C622
RESISTOR,METAL GLAZED(CHIP)
1.2K OHM 1 / 16 W 1608 5.00% D
R524
79093031
0RH1201C622
RESISTOR,METAL GLAZED(CHIP)
1.2K OHM 1 / 16 W 1608 5.00% D
R525
79093031
0RH1201C622
RESISTOR,METAL GLAZED(CHIP)
1.2K OHM 1 / 16 W 1608 5.00% D
R526
79093027
0RH1000C622
RESISTOR,METAL GLAZED(CHIP)
100 OHM 1 / 16 W 1608 5.00% D
R527
79093045
0RH4701C622
RESISTOR,METAL GLAZED(CHIP)
4.7K OHM 1 / 16 W 1608 5.00% D
R528
79093031
0RH1201C622
RESISTOR,METAL GLAZED(CHIP)
1.2K OHM 1 / 16 W 1608 5.00% D
5-8
REMARKS
S AL LOCA. NO. TOSHIBA PART LG PART NO. DESCRIPTION
SPECIFICATION
R529
79093020
0RH0000C622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 16 W 1608 5.00% D
R534
79098767
0RH1001C622
RESISTOR,METAL GLAZED(CHIP)
1K OHM 1 / 16 W 1608 5.00% D
R535
79098767
0RH1001C622
RESISTOR,METAL GLAZED(CHIP)
1K OHM 1 / 16 W 1608 5.00% D
R536
79093020
0RH0000C622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 16 W 1608 5.00% D
R549
79093045
0RH4701C622
RESISTOR,METAL GLAZED(CHIP)
4.7K OHM 1 / 16 W 1608 5.00% D
R564
79093037
0RH1802C622
RESISTOR,METAL GLAZED(CHIP)
18K OHM 1 / 16 W 1608 5.00% D
R565
79093037
0RH1802C622
RESISTOR,METAL GLAZED(CHIP)
18K OHM 1 / 16 W 1608 5.00% D
R566
79093029
0RH1002C622
RESISTOR,METAL GLAZED(CHIP)
10K OHM 1 / 16 W 1608 5.00% D
R567
79093029
0RH1002C622
RESISTOR,METAL GLAZED(CHIP)
10K OHM 1 / 16 W 1608 5.00% D
R571
79093044
0RH4700C622
RESISTOR,METAL GLAZED(CHIP)
470 OHM 1 / 16 W 1608 5.00% D
R572
79093020
0RH0000C622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 16 W 1608 5.00% D
R573
79093020
0RH0000C622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 16 W 1608 5.00% D
R574
79093020
0RH0000C622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 16 W 1608 5.00% D
R575
79093044
0RH4700C622
RESISTOR,METAL GLAZED(CHIP)
470 OHM 1 / 16 W 1608 5.00% D
R576
79093044
0RH4700C622
RESISTOR,METAL GLAZED(CHIP)
470 OHM 1 / 16 W 1608 5.00% D
R577
79093044
0RH4700C622
RESISTOR,METAL GLAZED(CHIP)
470 OHM 1 / 16 W 1608 5.00% D
R578
79093041
0RH3300C622
RESISTOR,METAL GLAZED(CHIP)
330 OHM 1 / 16 W 1608 5.00% D
R579
79098767
0RH1001C622
RESISTOR,METAL GLAZED(CHIP)
1K OHM 1 / 16 W 1608 5.00% D
R580
79098767
0RH1001C622
RESISTOR,METAL GLAZED(CHIP)
1K OHM 1 / 16 W 1608 5.00% D
R581
79098767
0RH1001C622
RESISTOR,METAL GLAZED(CHIP)
1K OHM 1 / 16 W 1608 5.00% D
R5A3
79093031
0RH1201C622
RESISTOR,METAL GLAZED(CHIP)
1.2K OHM 1 / 16 W 1608 5.00% D
R5A7
79093029
0RH1002C622
RESISTOR,METAL GLAZED(CHIP)
10K OHM 1 / 16 W 1608 5.00% D
R5A9
79098767
0RH1001C622
RESISTOR,METAL GLAZED(CHIP)
1K OHM 1 / 16 W 1608 5.00% D
R600
79098767
0RH1001C622
RESISTOR,METAL GLAZED(CHIP)
1K OHM 1 / 16 W 1608 5.00% D
R601
79093020
0RH0000C622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 16 W 1608 5.00% D
R602
79093020
0RH0000C622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 16 W 1608 5.00% D
R603
79093020
0RH0000C622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 16 W 1608 5.00% D
R605
79093051
0RH7501C622
RESISTOR,METAL GLAZED(CHIP)
7.5K OHM 1 / 16 W 1608 5.00% D
R606
79093051
0RH7501C622
RESISTOR,METAL GLAZED(CHIP)
7.5K OHM 1 / 16 W 1608 5.00% D
R607
79096480
0RH8201C622
RESISTOR,METAL GLAZED(CHIP)
8.2K OHM 1 / 16 W 1608 5.00% D
R608
79098770
0RH1801C622
RESISTOR,METAL GLAZED(CHIP)
1.8K OHM 1 / 16 W 1608 5.00% D
R609
79098770
0RH1801C622
RESISTOR,METAL GLAZED(CHIP)
1.8K OHM 1 / 16 W 1608 5.00% D
R610
79096480
0RH8201C622
RESISTOR,METAL GLAZED(CHIP)
8.2K OHM 1 / 16 W 1608 5.00% D
R611
79096480
0RH8201C622
RESISTOR,METAL GLAZED(CHIP)
8.2K OHM 1 / 16 W 1608 5.00% D
R612
79093047
0RH5601C622
RESISTOR,METAL GLAZED(CHIP)
5.6K OHM 1 / 16 W 1608 5.00% D
R613
79093045
0RH4701C622
RESISTOR,METAL GLAZED(CHIP)
4.7K OHM 1 / 16 W 1608 5.00% D
R614
79098770
0RH1801C622
RESISTOR,METAL GLAZED(CHIP)
1.8K OHM 1 / 16 W 1608 5.00% D
R615
79098770
0RH1801C622
RESISTOR,METAL GLAZED(CHIP)
1.8K OHM 1 / 16 W 1608 5.00% D
R616
79096480
0RH8201C622
RESISTOR,METAL GLAZED(CHIP)
8.2K OHM 1 / 16 W 1608 5.00% D
R617
79093051
0RH7501C622
RESISTOR,METAL GLAZED(CHIP)
7.5K OHM 1 / 16 W 1608 5.00% D
R618
79093051
0RH7501C622
RESISTOR,METAL GLAZED(CHIP)
7.5K OHM 1 / 16 W 1608 5.00% D
R619
79093041
0RH3300C622
RESISTOR,METAL GLAZED(CHIP)
330 OHM 1 / 16 W 1608 5.00% D
R620
79093041
0RH3300C622
RESISTOR,METAL GLAZED(CHIP)
330 OHM 1 / 16 W 1608 5.00% D
R621
79098771
0RH2200C622
RESISTOR,METAL GLAZED(CHIP)
220 OHM 1 / 16 W 1608 5.00% D
R622
79098771
0RH2200C622
RESISTOR,METAL GLAZED(CHIP)
220 OHM 1 / 16 W 1608 5.00% D
R623
79096030
0RH1003C622
RESISTOR,METAL GLAZED(CHIP)
100K OHM 1 / 16 W 1608 5.00% D
R624
79096030
0RH1003C622
RESISTOR,METAL GLAZED(CHIP)
100K OHM 1 / 16 W 1608 5.00% D
R625
79093029
0RH1002C622
RESISTOR,METAL GLAZED(CHIP)
10K OHM 1 / 16 W 1608 5.00% D
R626
79098767
0RH1001C622
RESISTOR,METAL GLAZED(CHIP)
1K OHM 1 / 16 W 1608 5.00% D
R627
79098767
0RH1001C622
RESISTOR,METAL GLAZED(CHIP)
1K OHM 1 / 16 W 1608 5.00% D
R628
79098767
0RH1001C622
RESISTOR,METAL GLAZED(CHIP)
1K OHM 1 / 16 W 1608 5.00% D
R629
79098767
0RH1001C622
RESISTOR,METAL GLAZED(CHIP)
1K OHM 1 / 16 W 1608 5.00% D
R631
79093020
0RH0000C622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 16 W 1608 5.00% D
R632
79093020
0RH0000C622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 16 W 1608 5.00% D
R633
79093020
0RH0000C622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 16 W 1608 5.00% D
R634
79098767
0RH1001C622
RESISTOR,METAL GLAZED(CHIP)
1K OHM 1 / 16 W 1608 5.00% D
R635
79093045
0RH4701C622
RESISTOR,METAL GLAZED(CHIP)
4.7K OHM 1 / 16 W 1608 5.00% D
R636
79093045
0RH4701C622
RESISTOR,METAL GLAZED(CHIP)
4.7K OHM 1 / 16 W 1608 5.00% D
R638
79093020
0RH0000C622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 16 W 1608 5.00% D
R640
79093033
0RH1500C422
RESISTOR,METAL GLAZED(CHIP)
150 OHM 1 / 16 W 1608 1.00% D
R643
79093033
0RH1500C422
RESISTOR,METAL GLAZED(CHIP)
150 OHM 1 / 16 W 1608 1.00% D
5-9
REMARKS
S AL LOCA. NO. TOSHIBA PART LG PART NO. DESCRIPTION
SPECIFICATION
R644
79093020
0RH0000C622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 16 W 1608 5.00% D
R649
79093033
0RH1500C422
RESISTOR,METAL GLAZED(CHIP)
150 OHM 1 / 16 W 1608 1.00% D
R652
79093033
0RH1500C422
RESISTOR,METAL GLAZED(CHIP)
150 OHM 1 / 16 W 1608 1.00% D
R655
79093033
0RH1500C422
RESISTOR,METAL GLAZED(CHIP)
150 OHM 1 / 16 W 1608 1.00% D
R656
79093020
0RH0000C622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 16 W 1608 5.00% D
R661
79093025
0RH0752C622
RESISTOR,METAL GLAZED(CHIP)
75 OHM 1 / 16 W 1608 5.00% D
R662
79093025
0RH0752C622
RESISTOR,METAL GLAZED(CHIP)
75 OHM 1 / 16 W 1608 5.00% D
R663
79093025
0RH0752C622
RESISTOR,METAL GLAZED(CHIP)
75 OHM 1 / 16 W 1608 5.00% D
R664
79093020
0RH0000C622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 16 W 1608 5.00% D
R665
79093020
0RH0000C622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 16 W 1608 5.00% D
R666
79093020
0RH0000C622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 16 W 1608 5.00% D
R670
79093020
0RH0000C622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 16 W 1608 5.00% D
R671
79093020
0RH0000C622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 16 W 1608 5.00% D
R672
79093020
0RH0000C622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 16 W 1608 5.00% D
R673
79093020
0RH0000C622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 16 W 1608 5.00% D
R674
79093020
0RH0000C622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 16 W 1608 5.00% D
R675
79093020
0RH0000C622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 16 W 1608 5.00% D
R690
79098767
0RH1001C622
RESISTOR,METAL GLAZED(CHIP)
1K OHM 1 / 16 W 1608 5.00% D
R691
79093020
0RH0000C622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 16 W 1608 5.00% D
R694
79093020
0RH0000C622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 16 W 1608 5.00% D
R6A0
79093025
0RH0752C622
RESISTOR,METAL GLAZED(CHIP)
75 OHM 1 / 16 W 1608 5.00% D
R6A1
79093025
0RH0752C622
RESISTOR,METAL GLAZED(CHIP)
75 OHM 1 / 16 W 1608 5.00% D
R6A2
79093025
0RH0752C622
RESISTOR,METAL GLAZED(CHIP)
75 OHM 1 / 16 W 1608 5.00% D
R6A3
79093025
0RH0752C622
RESISTOR,METAL GLAZED(CHIP)
75 OHM 1 / 16 W 1608 5.00% D
R6A4
79093025
0RH0752C622
RESISTOR,METAL GLAZED(CHIP)
75 OHM 1 / 16 W 1608 5.00% D
R6A5
79093025
0RH0752C622
RESISTOR,METAL GLAZED(CHIP)
75 OHM 1 / 16 W 1608 5.00% D
R6C8
79093020
0RH0000C622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 16 W 1608 5.00% D
R6C9
79093020
0RH0000C622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 16 W 1608 5.00% D
R6D1
79093020
0RH0000C622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 16 W 1608 5.00% D
R6T2
79093020
0RH0000C622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 16 W 1608 5.00% D
R6U1
79093045
0RH4701C622
RESISTOR,METAL GLAZED(CHIP)
4.7K OHM 1 / 16 W 1608 5.00% D
R6U2
79093047
0RH5601C622
RESISTOR,METAL GLAZED(CHIP)
5.6K OHM 1 / 16 W 1608 5.00% D
R6W1
79098768
0RH1100C622
RESISTOR,METAL GLAZED(CHIP)
110 OHM 1 / 16 W 1608 5.00% D
R6W2
79093025
0RH0752C622
RESISTOR,METAL GLAZED(CHIP)
75 OHM 1 / 16 W 1608 5.00% D
R6W3
79093023
0RH0222C622
RESISTOR,METAL GLAZED(CHIP)
22 OHM 1 / 16 W 1608 5.00% D
R6W4
79098768
0RH1100C622
RESISTOR,METAL GLAZED(CHIP)
110 OHM 1 / 16 W 1608 5.00% D
R6W5
79093023
0RH0222C622
RESISTOR,METAL GLAZED(CHIP)
22 OHM 1 / 16 W 1608 5.00% D
X501
79097346
6202R-BL06C
RESONATOR,CRYSTAL
HC-49/S BUBANG 27MHZ 20PPM 1
ZD510
79096015
0DZ562609AA
DIODE,ZENER
GDZJ5.6B 26MM TP GRANDE DO34
*** PWB(PCB) ASSEMBLY , TOTAL 5.1CH ***
A48
AF000181
6871R-7601B
PWB(PCB) ASSEMBLY,TOTAL
C302
79096283
0CH1104K946
CAPACITOR,FIXED CERAMIC(TEMP.C 0.1UF 2012 50V 80%,-20% Y5V(F)
C303
79097104
0CE1064F638
CAPACITOR,ELECTROLYTIC
10M SRA 16V M FM5 TP(5)
C304
79098709
0CE2274C638
CAPACITOR,ELECTROLYTIC
220M SRA 6.3V M FM5 TP(5)
C305
79096283
0CH1104K946
CAPACITOR,FIXED CERAMIC(TEMP.C 0.1UF 2012 50V 80%,-20% Y5V(F)
C306
AF000152
0CH4102K406
CHIP CAPA CERAMIC M/L T.C F/S
C307
79096292
0CH4101K416
CAPA,CHIP CERAMIC M/L T.C F/S
100P 50V J NP0 2.0*1.25 R/TP
C308
79096608
0CH1392K566
CAPACITOR,FIXED CERAMIC(Temp.c
3900P 50V K X7R 2.0X1.2 R/TP
C309
79097104
0CE1064F638
CAPACITOR,ELECTROLYTIC
10M SRA 16V M FM5 TP(5)
C310
79097104
0CE1064F638
CAPACITOR,ELECTROLYTIC
10M SRA 16V M FM5 TP(5)
C311
79097104
0CE1064F638
CAPACITOR,ELECTROLYTIC
10M SRA 16V M FM5 TP(5)
C312
79097104
0CE1064F638
CAPACITOR,ELECTROLYTIC
10M SRA 16V M FM5 TP(5)
C313
AF000152
0CH4102K406
CHIP CAPA CERAMIC M/L T.C F/S
1000P 50V J SL 2.0X1.2 R/TP
C314
79096292
0CH4101K416
CAPA,CHIP CERAMIC M/L T.C F/S
100P 50V J NP0 2.0*1.25 R/TP
C315
79097104
0CE1064F638
CAPACITOR,ELECTROLYTIC
10M SRA 16V M FM5 TP(5)
C316
AF000152
0CH4102K406
CHIP CAPA CERAMIC M/L T.C F/S
1000P 50V J SL 2.0X1.2 R/TP
C317
79096292
0CH4101K416
CAPA,CHIP CERAMIC M/L T.C F/S
100P 50V J NP0 2.0*1.25 R/TP
C318
79097104
0CE1064F638
CAPACITOR,ELECTROLYTIC
10M SRA 16V M FM5 TP(5)
C319
79096608
0CH1392K566
CAPACITOR,FIXED CERAMIC(Temp.c
3900P 50V K X7R 2.0X1.2 R/TP
C320
79097104
0CE1064F638
CAPACITOR,ELECTROLYTIC
10M SRA 16V M FM5 TP(5)
C321
79097104
0CE1064F638
CAPACITOR,ELECTROLYTIC
10M SRA 16V M FM5 TP(5)
5-10
DV7000S MTK SH 5.1CH
1000P 50V J SL 2.0X1.2 R/TP
REMARKS
S AL LOCA. NO. TOSHIBA PART LG PART NO. DESCRIPTION
SPECIFICATION
C322
79097104
0CE1064F638
CAPACITOR,ELECTROLYTIC
10M SRA 16V M FM5 TP(5)
C323
79097104
0CE1064F638
CAPACITOR,ELECTROLYTIC
10M SRA 16V M FM5 TP(5)
C324
79096608
0CH1392K566
CAPACITOR,FIXED CERAMIC(Temp.c
3900P 50V K X7R 2.0X1.2 R/TP
C325
79097104
0CE1064F638
CAPACITOR,ELECTROLYTIC
10M SRA 16V M FM5 TP(5)
C326
79097104
0CE1064F638
CAPACITOR,ELECTROLYTIC
10M SRA 16V M FM5 TP(5)
C327
79096608
0CH1392K566
CAPACITOR,FIXED CERAMIC(Temp.c
3900P 50V K X7R 2.0X1.2 R/TP
C328
79096292
0CH4101K416
CAPA,CHIP CERAMIC M/L T.C F/S
100P 50V J NP0 2.0*1.25 R/TP
C329
AF000152
0CH4102K406
CHIP CAPA CERAMIC M/L T.C F/S
1000P 50V J SL 2.0X1.2 R/TP
C330
79096292
0CH4101K416
CAPA,CHIP CERAMIC M/L T.C F/S
100P 50V J NP0 2.0*1.25 R/TP
C331
AF000152
0CH4102K406
CHIP CAPA CERAMIC M/L T.C F/S
1000P 50V J SL 2.0X1.2 R/TP
C332
79097104
0CE1064F638
CAPACITOR,ELECTROLYTIC
10M SRA 16V M FM5 TP(5)
C333
79097104
0CE1064F638
CAPACITOR,ELECTROLYTIC
10M SRA 16V M FM5 TP(5)
C334
79097104
0CE1064F638
CAPACITOR,ELECTROLYTIC
10M SRA 16V M FM5 TP(5)
C335
79096292
0CH4101K416
CAPA,CHIP CERAMIC M/L T.C F/S
100P 50V J NP0 2.0*1.25 R/TP
C336
AF000152
0CH4102K406
CHIP CAPA CERAMIC M/L T.C F/S
1000P 50V J SL 2.0X1.2 R/TP
C337
79096608
0CH1392K566
CAPACITOR,FIXED CERAMIC(Temp.c
3900P 50V K X7R 2.0X1.2 R/TP
C338
79097104
0CE1064F638
CAPACITOR,ELECTROLYTIC
10M SRA 16V M FM5 TP(5)
C339
79097104
0CE1064F638
CAPACITOR,ELECTROLYTIC
10M SRA 16V M FM5 TP(5)
C340
79096608
0CH1392K566
CAPACITOR,FIXED CERAMIC(Temp.c
3900P 50V K X7R 2.0X1.2 R/TP
C341
79097106
0CE2264F638
CAPACITOR,ELECTROLYTIC
22M SRA 16V M FM5 TP(5)
C342
79097106
0CE2264F638
CAPACITOR,ELECTROLYTIC
22M SRA 16V M FM5 TP(5)
D311
79096013
0DS202009CA
DIODE,SWITCHING
DAN202K TP ROHM KOREA SOT23 80
D312
79096013
0DS202009CA
DIODE,SWITCHING
DAN202K TP ROHM KOREA SOT23 80
F301
79091006
6200HJC901A
FILTER(CIRC),EMC
CFI06B1H101MF SAMHWA TP 2-5K
F302
79091006
6200HJC901A
FILTER(CIRC),EMC
CFI06B1H101MF SAMHWA TP 2-5K
F303
79091006
6200HJC901A
FILTER(CIRC),EMC
CFI06B1H101MF SAMHWA TP 2-5K
F304
79091006
6200HJC901A
FILTER(CIRC),EMC
CFI06B1H101MF SAMHWA TP 2-5K
F305
79091006
6200HJC901A
FILTER(CIRC),EMC
CFI06B1H101MF SAMHWA TP 2-5K
F306
79091006
6200HJC901A
FILTER(CIRC),EMC
CFI06B1H101MF SAMHWA TP 2-5K
IC301
AF000158
0IPRPBB002A
IC,PERIPHERALS
PCM1603KY BUR BROWN 52 TQFP TR
IC302
79098737
0IJR458000B
IC,JRC
NJM4580M 8,DMP8 TP OP AMP 2K/R
IC303
79098737
0IJR458000B
IC,JRC
NJM4580M 8,DMP8 TP OP AMP 2K/R
IC304
79098737
0IJR458000B
IC,JRC
NJM4580M 8,DMP8 TP OP AMP 2K/R
JK301
AF000178
6612JH002XA
JACK,RCA
RCA-617A-01 YUQIU
Q301
79095008
0TR387509AC
TRANSISTOR
CHIP KTC3875S-GR-T1(ALG) KEC
Q302
79095008
0TR387509AC
TRANSISTOR
CHIP KTC3875S-GR-T1(ALG) KEC
Q303
79095008
0TR387509AC
TRANSISTOR
CHIP KTC3875S-GR-T1(ALG) KEC
Q304
79095008
0TR387509AC
TRANSISTOR
CHIP KTC3875S-GR-T1(ALG) KEC
Q305
79095008
0TR387509AC
TRANSISTOR
CHIP KTC3875S-GR-T1(ALG) KEC
Q306
79095008
0TR387509AC
TRANSISTOR
CHIP KTC3875S-GR-T1(ALG) KEC
Q307
79096031
0TR103009AC
TRANSISTOR
KRA103S-T1(PC)22-22 CHIP KEC
Q308
79096031
0TR103009AC
TRANSISTOR
KRA103S-T1(PC)22-22 CHIP KEC
R301
79096344
0RH1001D622
RESISTOR,METAL GLAZED(CHIP)
1K OHM 1 / 10 W 2012 5.00% D
R302
AF000161
0RH0102D622
RESISTOR,METAL GLAZED(CHIP)
10 OHM 1 / 10 W 2012 5.00% D
R303
79096206
0RH0000D622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 10 W 2012 5.00% D
R305
AF000161
0RH0102D622
RESISTOR,METAL GLAZED(CHIP)
10 OHM 1 / 10 W 2012 5.00% D
R306
79096344
0RH1001D622
RESISTOR,METAL GLAZED(CHIP)
1K OHM 1 / 10 W 2012 5.00% D
R307
79096346
0RH1003D622
RESISTOR,METAL GLAZED(CHIP)
100K OHM 1 / 10 W 2012 5.00% D
R308
79096355
0RH2200D622
RESISTOR,METAL GLAZED(CHIP)
220 OHM 1 / 10 W 2012 5.00% D
R309
79096556
0RH3300D622
RESISTOR,METAL GLAZED(CHIP)
330 OHM 1 / 10 W 2012 5.00% D
R310
79096344
0RH1001D622
RESISTOR,METAL GLAZED(CHIP)
1K OHM 1 / 10 W 2012 5.00% D
R311
79096351
0RH1502D622
RESISTOR,METAL GLAZED(CHIP)
15K OHM 1 / 10 W 2012 5.00% D
R312
79096370
0RH6801D622
RESISTOR,METAL GLAZED(CHIP)
6.8K OHM 1 / 10 W 2012 5.00% D
R313
79096371
0RH7501D622
RESISTOR,METAL GLAZED(CHIP)
7.5K OHM 1 / 10 W 2012 5.00% D
R314
79096371
0RH7501D622
RESISTOR,METAL GLAZED(CHIP)
7.5K OHM 1 / 10 W 2012 5.00% D
R315
79096371
0RH7501D622
RESISTOR,METAL GLAZED(CHIP)
7.5K OHM 1 / 10 W 2012 5.00% D
R316
79096370
0RH6801D622
RESISTOR,METAL GLAZED(CHIP)
6.8K OHM 1 / 10 W 2012 5.00% D
R317
79096351
0RH1502D622
RESISTOR,METAL GLAZED(CHIP)
15K OHM 1 / 10 W 2012 5.00% D
R318
79096556
0RH3300D622
RESISTOR,METAL GLAZED(CHIP)
330 OHM 1 / 10 W 2012 5.00% D
R319
79096551
0RH5601D622
RESISTOR,METAL GLAZED(CHIP)
5.6K OHM 1 / 10 W 2012 5.00% D
R320
79096365
0RH4701D622
RESISTOR,METAL GLAZED(CHIP)
4.7K OHM 1 / 10 W 2012 5.00% D
5-11
REMARKS
S AL LOCA. NO. TOSHIBA PART LG PART NO. DESCRIPTION
SPECIFICATION
REMARKS
R321
79096346
0RH1003D622
RESISTOR,METAL GLAZED(CHIP)
100K OHM 1 / 10 W 2012 5.00% D
R322
79096355
0RH2200D622
RESISTOR,METAL GLAZED(CHIP)
220 OHM 1 / 10 W 2012 5.00% D
R323
79096344
0RH1001D622
RESISTOR,METAL GLAZED(CHIP)
1K OHM 1 / 10 W 2012 5.00% D
R324
79096355
0RH2200D622
RESISTOR,METAL GLAZED(CHIP)
220 OHM 1 / 10 W 2012 5.00% D
R325
79096346
0RH1003D622
RESISTOR,METAL GLAZED(CHIP)
100K OHM 1 / 10 W 2012 5.00% D
R326
79096556
0RH3300D622
RESISTOR,METAL GLAZED(CHIP)
330 OHM 1 / 10 W 2012 5.00% D
R327
79096344
0RH1001D622
RESISTOR,METAL GLAZED(CHIP)
1K OHM 1 / 10 W 2012 5.00% D
R328
79096351
0RH1502D622
RESISTOR,METAL GLAZED(CHIP)
15K OHM 1 / 10 W 2012 5.00% D
R329
79096370
0RH6801D622
RESISTOR,METAL GLAZED(CHIP)
6.8K OHM 1 / 10 W 2012 5.00% D
R330
79096344
0RH1001D622
RESISTOR,METAL GLAZED(CHIP)
1K OHM 1 / 10 W 2012 5.00% D
R331
79096371
0RH7501D622
RESISTOR,METAL GLAZED(CHIP)
7.5K OHM 1 / 10 W 2012 5.00% D
R332
79096370
0RH6801D622
RESISTOR,METAL GLAZED(CHIP)
6.8K OHM 1 / 10 W 2012 5.00% D
R333
79096351
0RH1502D622
RESISTOR,METAL GLAZED(CHIP)
15K OHM 1 / 10 W 2012 5.00% D
R334
79096556
0RH3300D622
RESISTOR,METAL GLAZED(CHIP)
330 OHM 1 / 10 W 2012 5.00% D
R335
79096551
0RH5601D622
RESISTOR,METAL GLAZED(CHIP)
5.6K OHM 1 / 10 W 2012 5.00% D
R336
79096365
0RH4701D622
RESISTOR,METAL GLAZED(CHIP)
4.7K OHM 1 / 10 W 2012 5.00% D
R337
79096346
0RH1003D622
RESISTOR,METAL GLAZED(CHIP)
100K OHM 1 / 10 W 2012 5.00% D
R338
79096355
0RH2200D622
RESISTOR,METAL GLAZED(CHIP)
220 OHM 1 / 10 W 2012 5.00% D
R339
79096344
0RH1001D622
RESISTOR,METAL GLAZED(CHIP)
1K OHM 1 / 10 W 2012 5.00% D
R340
79096344
0RH1001D622
RESISTOR,METAL GLAZED(CHIP)
1K OHM 1 / 10 W 2012 5.00% D
R341
79096355
0RH2200D622
RESISTOR,METAL GLAZED(CHIP)
220 OHM 1 / 10 W 2012 5.00% D
R342
79096346
0RH1003D622
RESISTOR,METAL GLAZED(CHIP)
100K OHM 1 / 10 W 2012 5.00% D
R343
79096556
0RH3300D622
RESISTOR,METAL GLAZED(CHIP)
330 OHM 1 / 10 W 2012 5.00% D
R344
79096344
0RH1001D622
RESISTOR,METAL GLAZED(CHIP)
1K OHM 1 / 10 W 2012 5.00% D
R345
79096351
0RH1502D622
RESISTOR,METAL GLAZED(CHIP)
15K OHM 1 / 10 W 2012 5.00% D
R346
79096370
0RH6801D622
RESISTOR,METAL GLAZED(CHIP)
6.8K OHM 1 / 10 W 2012 5.00% D
R347
79096371
0RH7501D622
RESISTOR,METAL GLAZED(CHIP)
7.5K OHM 1 / 10 W 2012 5.00% D
R348
79096371
0RH7501D622
RESISTOR,METAL GLAZED(CHIP)
7.5K OHM 1 / 10 W 2012 5.00% D
R349
79096370
0RH6801D622
RESISTOR,METAL GLAZED(CHIP)
6.8K OHM 1 / 10 W 2012 5.00% D
R350
79096351
0RH1502D622
RESISTOR,METAL GLAZED(CHIP)
15K OHM 1 / 10 W 2012 5.00% D
R361
79096556
0RH3300D622
RESISTOR,METAL GLAZED(CHIP)
330 OHM 1 / 10 W 2012 5.00% D
R362
79096551
0RH5601D622
RESISTOR,METAL GLAZED(CHIP)
5.6K OHM 1 / 10 W 2012 5.00% D
R363
79096365
0RH4701D622
RESISTOR,METAL GLAZED(CHIP)
4.7K OHM 1 / 10 W 2012 5.00% D
R364
79096344
0RH1001D622
RESISTOR,METAL GLAZED(CHIP)
1K OHM 1 / 10 W 2012 5.00% D
R365
79096355
0RH2200D622
RESISTOR,METAL GLAZED(CHIP)
220 OHM 1 / 10 W 2012 5.00% D
R366
79096346
0RH1003D622
RESISTOR,METAL GLAZED(CHIP)
100K OHM 1 / 10 W 2012 5.00% D
R374
79096206
0RH0000D622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 10 W 2012 5.00% D
R375
79096344
0RH1001D622
RESISTOR,METAL GLAZED(CHIP)
1K OHM 1 / 10 W 2012 5.00% D
R376
79096344
0RH1001D622
RESISTOR,METAL GLAZED(CHIP)
1K OHM 1 / 10 W 2012 5.00% D
R377
79096206
0RH0000D622
RESISTOR,METAL GLAZED(CHIP)
0 OHM 1 / 10 W 2012 5.00% D
*** PWB(PCB) ASSEMBLY , TOTAL POWER ***
A47
79096640
6871R-7605F
PWB(PCB) ASSEMBLY,TOTAL
BC101
79091008
636-004C
FILTER(CIRC),EMC
BEAD CORE BFS3550R2FD8,R T/P
BD101
79096005
0DD160000DA
DIODE
S1WBA60(1A 600V)
C101
79097353
624-088S
CAPACITOR,DRAWING
MPX104K ETR/EUROPTRONIC BULK
C102
79097353
624-088S
CAPACITOR,DRAWING
MPX104K ETR/EUROPTRONIC BULK
C103
79097105
0CE1076Q600
CAPACITOR,ELECTROLYTIC
100UF SMS 200V M W BULK
C104
79092035
624-085D
CAPACITOR
CE 47UF/50V KME (SMPS)
C106
79097104
0CE1064F638
CAPACITOR,ELECTROLYTIC
10M SRA 16V M FM5 TP(5)
C107
79096148
0CG2220U630
CAPACITOR,SEMI CERAMIC
2200 PF 400V M E R (NK,AD,SD)
C108
79096616
0CE4744K638
CAPACITOR,ELECTROLYTIC
0.47M SRA 50V M FM5 TP(5)
C109
79092003
0CE108BF630
CAPACITOR,FIXED ELECTROLYTIC
1000UF KME 16V M FM5 BULK
C110
79098729
0CN4730K948
CAPACITOR,FIXED TUBULAR(High d
0.047UF D 50V 80%,-20% F(Y5V)
C112
79092007
0CE3376D638
CAPACITOR,ELECTROLYTIC
330UF SMS 10V M FM5 TP5
C113
79096279
0CG1020U630
CAPACITOR,SEMI CERAMIC
1000PF 400V M E(Z5U) R
C115
79096697
0CE3366K638
CAPACITOR,FIXED ELECTROLYTIC
33UF SMS,SG 50V 20% FM5 TP 5
C116
79092010
0CE477BH630
CAPACITOR,AL.ELECTROLYTIC
470UF KME TYPE 25V M FM5 BULK
C118
79098705
0CE1074F638
CAPACITOR,ELECTROLYTIC
100U SRA 16V M FM5 TP(5)
C119
79096651
624-087G
CAPACITOR
HIGH-VOL 68PF/1KV SMPS SAMHWA
C120
79098705
0CE1074F638
CAPACITOR,ELECTROLYTIC
100U SRA 16V M FM5 TP(5)
C121
79009200
0CE2276F638
CAPACITOR,ELECTROLYTIC
220U SMS 16V M FM5 TP(5)
5-12
DV7000S MTK SMPS SH 110V(UL) L
SHIDENKEN
S AL LOCA. NO. TOSHIBA PART LG PART NO. DESCRIPTION
SPECIFICATION
REMARKS
C121
79092005
0CE2276F638
CAPACITOR,ELECTROLYTIC
220U SMS 16V M FM5 TP(5)
C122
79092035
624-085D
CAPACITOR
CE 47UF/50V KME (SMPS)
C123
79092003
0CE108BF630
CAPACITOR,FIXED ELECTROLYTIC
1000UF KME 16V M FM5 BULK
C124
79098711
0CE337CH618
CAPACITOR,FIXED ELECTROLYTIC
330UF SHL,SD 25V 20% FL TP 5
C126
79092033
0CQ1031Y519
CAPACITOR,POLYESTER
0.01UF D 630V K PE NI TP
C128
79098731
0CQ1042K409
CAPACITOR,FIXED FILM
0.1UF S 50V J PE TP
C130
79098705
0CE1074F638
CAPACITOR,ELECTROLYTIC
100U SRA 16V M FM5 TP(5)
C131
79098705
0CE1074F638
CAPACITOR,ELECTROLYTIC
100U SRA 16V M FM5 TP(5)
C137
79092007
0CE3376D638
CAPACITOR,ELECTROLYTIC
330UF SMS 10V M FM5 TP5
D100
79096002
0DD010009CA
DIODE,RECTIFIER
EG01CW(R-FORM 5MM) TP SANKEN
D100
79096006
0DD221009AA
DIODE,RECTIFIERS
ERA22-10 KFLB,TP ,R T/P,FUJI
D101
AF000153
0DZ240009AF
DIODE,ZENERS
GDZJ24B GRANDE TP26 DO34 0.5W
D102
79096011
0DR810040BA
DIODE,RECTIFIER
ERC81-004L22 BK FUJI DO201AD 4
D102
79096009
0DR158220AA
DIODE,RECTIFIER
1N5822 BK RECTRON DO201AD 40V
D103
79096696
0DR202000AB
DIODE,RECTIFIER
HER202 BK RECTRON NON 100V 2A
D104
79096023
0DR104009BA
DIODE,RECTIFIER
RL104F TP RECTRON NON 400V 1A
D106
79096008
0DR104009AB
DIODE,RECTIFIER
RL104 R. TP GULF SEMICONDUCTOR
D107
79096023
0DR104009BA
DIODE,RECTIFIER
RL104F TP RECTRON NON 400V 1A
D108
79096023
0DR104009BA
DIODE,RECTIFIER
RL104F TP RECTRON NON 400V 1A
D109
79096696
0DR202000AB
DIODE,RECTIFIER
HER202 BK RECTRON NON 100V 2A
D110
79096023
0DR104009BA
DIODE,RECTIFIER
RL104F TP RECTRON NON 400V 1A
D111
79096012
0DRRE00029A
DIODE,RECTIFIERS
1N17 RECTRON TP NON 20V 1A 20
F101
79096318
0FS1601B51B
FUSE,SLOW BLOW
1600MA 250 V 5.2X20 CY/GL KS /
F101
79098701
585-027B
FUSE,SLOW BLOW
1600MA 250 V 5.2X20 CY/GL KS /
F102
79096691
0RF0200F708
RESISTOR,VARIABLE[CARBON FILM]
0.2 OHM 1/6 W 10% TA26
FH101
79098790
586-008B
HOLDER
FUSE CLIP TP SINSUNG
FH102
79098790
586-008B
HOLDER
FUSE CLIP TP SINSUNG
IC101
79096694
0IPMGIH004A
IC,POWER MANAGEMENT
ICE2B0565 INFINEON 8PIN DIP ST
IC102
79094030
657-063A
SENSOR
LTV-817B,PHOTO COUPLER(LITEON)
IC103
AF000157
0IPMGSH010A
IC,POWER MANAGEMENT
PQ12RD1L SHARP 4PIN TO-220 ST
ALTERNATE
IC103
79098750
0IPMGFA017A
IC,POWER MANAGEMENT
KA78R12TSTU FAIRCHILD 4P TO-22
ALTERNATE
IC103
79098740
0IKE781200S
IC,KEC
KIA78R12PI CU 4P TO-220IS ST 1
IC104
79097152
0IPMGUK001A
IC,POWER MANAGEMENT
SL431-AT AUK 3PIN TO-92 TP PRO
IC104
79094010
0IKE431000A
IC,KEC
KIA431 3 PIN TP
IC104
79094020
0ISS431000A
IC,SAMSUNG ELECTRONICS
KA431AZ (LM431AZ)
ALTERNATE
IC105
AF000115
0IPMGSH009A
IC,POWER MANAGEMENT
PQ08RD1L SHARP 4PIN TO-220 ST
ALTERNATE
IC105
79098753
0IPMGKE008B
IC,POWER MANAGEMENT
KIA78R08PI CU KEC 4P TO-220IS
IC105
79098749
0IPMGFA016A
IC,POWER MANAGEMENT
KA78R08TSTU FAIRCHILD 4P TO-22
ALTERNATE
IC106
AF000160
0ISH313000C
IC,SHARP
PQ3RD13L 4PIN TO-220 ST 3.3V L
ALTERNATE
IC106
79098752
0IPMGKE006B
IC,POWER MANAGEMENT
KIA78R33PI CU KEC 4P TO-220IS
IC106
79098748
0IPMGFA015A
IC,POWER MANAGEMENT
KA78R33TSTU FAIRCHILD 4P TO-22
L101
79091004
616-145J
FILTER(CIRC),DRAWING
BUJEON V-04350
L101
79098791
616-145M
FILTER(CIRC),DRAWING
V-04350 LS FUTAI BULK =616-145
L102
79098794
633-088D
COIL,CHOKE
CHOCK ,20UH KWANGSUNG LEAD CU
L103
79091007
633-088G
COIL,CHOKE
CHOCK(22MH) 5MM TOKO TP
L105
79091007
633-088G
COIL,CHOKE
CHOCK(22MH) 5MM TOKO TP
Q101
79095006
0TR319809AC
TRANSISTOR
KTC3198-TP-BL (KTC1815)KEC
ALTERNATE
Q101
79095007
0TR319909AF
TRANSISTOR,BIPOLARS
KTC3199-BL MINI TP KEC
ALTERNATE
Q101
79096377
0TR534309BA
TRANSISTOR
2SC5343-L TP AUK TO92
Q102
79096688
0TR105009AD
TRANSISTOR,BIPOLARS
KRA105M KEC TP TO92 50V 100MA
Q107
AF000018
0TR115100AC
TRANSISTOR,BIPOLARS
KTB1151-Y BK KEC TO126 -
Q107
79096546
0TR115100AA
TRANSISTOR
KSB1151-Y BK SAMSUNG TO-126
Q108
79095006
0TR319809AC
TRANSISTOR
KTC3198-TP-BL (KTC1815)KEC
Q108
79096377
0TR534309BA
TRANSISTOR
2SC5343-L TP AUK TO92
Q108
79095007
0TR319909AF
TRANSISTOR,BIPOLARS
KTC3199-BL MINI TP KEC
R100
79093009
0RD1504H632
RESISTOR,FIXED CARBON FILM
1.5M OHM 1/2 W 5.00% MF10
R101
79093056
614-007A
RESISTOR
2.7/2W CEMENT SMPS V
R103
79093055
0RS5602K619
RESISTOR,FIXED METAL OXIDE FIL
56K OHM 2 W 5.00% TR
R107
79096689
0RS0600K619
RESISTOR,FIXED METAL OXIDE FIL
0.6 OHM 2 W 5% TR
R109
79093012
0RD2203F608
RESISTOR,FIXED CARBON FILM
220K OHM 1/6 W 5% TA26
R110
79093012
0RD2203F608
RESISTOR,FIXED CARBON FILM
220K OHM 1/6 W 5% TA26
5-13
ALTERNATE
ALTERNATE
ALTERNATE
ALTERNATE
S AL LOCA. NO. TOSHIBA PART LG PART NO. DESCRIPTION
SPECIFICATION
R112
79096692
0RD0392F608
RESISTOR,FIXED CARBON FILM
39 OHM 1/6 W 5% TA26
R114
79093006
0RD1003F608
RESISTOR,FIXED CARBON FILM
100K OHM 1/6 W 5% TA26
R115
79097165
0RD0182F608
RESISTOR,FIXED CARBON FILM
18 OHM 1/6 W 5.00% TA26
R116
79097165
0RD0182F608
RESISTOR,FIXED CARBON FILM
18 OHM 1/6 W 5.00% TA26
R120
79093018
0RD4702F608
RESISTOR,FIXED CARBON FILM
47K OHM 1/6 W 5% TA26
R121
79093007
0RD1201F608
RESISTOR,FIXED CARBON FILM
1.2K OHM 1/6 W 5% TA26
R121
79096185
0RD1201F608
RESISTOR,FIXED CARBON FILM
1.2K OHM 1/6 W 5% TA26
R122
79093011
0RD2200F608
RESISTOR,FIXED CARBON FILM
220 OHM 1/6 W 5% TA26
R123
79093004
0RD1001F608
RESISTOR,FIXED CARBON FILM
1K OHM 1/6 W 5% TA26
R124
79093010
0RD1800F608
RESISTOR,FIXED CARBON FILM
180 OHM 1/6 W 5% TA26
R125
79093015
0RD3901F608
RESISTOR,FIXED CARBON FILM
3.9K OHM 1/6 W 5% TA26
R126
79093004
0RD1001F608
RESISTOR,FIXED CARBON FILM
1K OHM 1/6 W 5% TA26
R127
79093054
0RN3601E408
RESISTOR,FIXED METAL FILM
3.6K OHM 1/8 W 1.00% TA26
R128
79093053
0RN3301E408
RESISTOR,FIXED METAL FILM
3.3K OHM 1/8 W 1.00% TA26
R130
79093005
0RD1002F608
RESISTOR,FIXED CARBON FILM
10K OHM 1/6 W 5% TA26
R131
79098761
0RD2201F608
RESISTOR,FIXED CARBON FILM
2.2K OHM 1/6 W 5% TA26
R132
79093005
0RD1002F608
RESISTOR,FIXED CARBON FILM
10K OHM 1/6 W 5% TA26
R140
79093004
0RD1001F608
RESISTOR,FIXED CARBON FILM
1K OHM 1/6 W 5% TA26
R142
79093004
0RD1001F608
RESISTOR,FIXED CARBON FILM
1K OHM 1/6 W 5% TA26
R145
79093016
0RD4700F608
RESISTOR,FIXED CARBON FILM
470 OHM 1/6 W 5% TA26
T101
79096069
6170RNGW05B
TRANSFORMER,SMPS[COIL]
EER2828 SOOJUNG DVD SLIM
SVC681D-10A SAMHWA 4.O CUT
V101
79098795
656-004C
VARISTOR,DRAWING
ZD101
79098735
0DZ560009CJ
DIODE,ZENERS
GDZJ5.6B 26MM GRANDE TP26 DO34
ZD102
79098734
0DZ332609FB
DIODE,ZENERS
GDZJ3.3B 26MM GRANDE TP26 DO34
5-14
REMARKS
TOSHIBA CORPORATION
1-1, SHIBAURA 1-CHOME, MINATO-KU, TOKYO 105-8001, JAPAN