Multi-Service Platform - Converter
Fast Ethernet OAM/IP In-band
Managed Converter
FRM220-100M
The FRM220-100M is an IEEE802.3ah OAM compliant copper to fiber Fast Ethernet solution designed to make conversion between
10/100Base-TX and 100Base-FX with SC, FC, ST connector. When deployed as a stand-alone solution, this media converter incorporates
an easy to use Web user interface for operation, administration and maintenance of both local and remotely connected FRM220-100M
converters. By offering 802.3ah OAM compliance, this converter can be linked to any 802.3ah compliant fiber switch and support loop
back and dying gasp functions. When placed in our centrally controlled and managed rack, all functions of this converter and the
remotely connected converter can be configured and monitored via in-band management, including band-width control, duplex,
speed, VLAN configuration and more.
Specifications
Features
Ɣ 1 Port 10/100BASE-TX to 100BASE-FX Converter
Connector
1x9 (SC, ST, FC)(Option)
Ɣ Auto-Cross over for MDI/MDIX in TP port
Data rate
100Mbps
Ɣ Auto-Negotiation or Manual mode in TP port
Duplex mode Full duplex
Ɣ Dying gasp (remote power failure detection) on standalone unit
Fiber
Optical Interface
MM 50/125Ǎm, 62.5/125Ǎm.
SM 9/125Ǎm
Ɣ Supports Link Fault Pass Through ( LFP ) Function
Distance
Ɣ Supports Auto Laser Shutdown (ALS) Function
MM 2km, SM 15/30/50/80/120km,
WDM 20/40/60/80km
Ɣ Supports flow control Enable or Disable
Wavelength MM 1310nm, SM 1310,1550nm
Ɣ Supports Jumbo Frame 9K Packet
WDM 1310Tx/1550Rx (type A)
Ɣ Ingress/Egress Bandwidth control
1550Tx/1310Rx (type B)
Ɣ Support 802.3ah-OAM/IP in-band management
Electrical Interface
(for standalone unit only)
Connector
RJ-45
Data rate
10Mbps, 100Mbps
Ɣ Firmware upgrade via Web (for standalone unit only)
Duplex mode Half / Full duplex
Ɣ Password Setting (for standalone unit only)
Cable
10Base-T Cat.3, 4, 5, UTP,
100Base-TX Cat.5, 5e or higher
Ɣ Allow IP settings Web or Console management
(for standalone unit only)
Ɣ Supports 16 Tag VLAN Group (for standalone unit only)
Ɣ RMON counters (for standalone unit only)
Ɣ Supports Double VLAN tag (Q-in-Q) on standalone unit
Central Office (CO)
Standard
IEEE 802.3, IEEE 802.3u
Indications
LED (Power, FX-Link, LAN Speed, LAN Link )
Power Input
Card : 12VDC
Power Consumption
< 4W
Dimension / Weight
155 x 88 x 23mm (D x W x H) ; 0.12kg
Temperature
0 ~ 60°C (Operating), -10 ~ 70°C (Storage)
Humidity
10 ~ 90% non-condensing
Certification
CE, FCC, LVD, RoHS
MTBF
65,000 hrs
Standalone : AC, DC options
Customer Premise Equipment (CPE)
OAM Remote
Management
FRM220-100M
Fast Ethernet
LAN
IP Networking
FRM220
Fast Ethernet
LAN
FRM220-100M
Inserted in 20-Slot chassis
Router / Switch
OAM Remote
Management
EMS
Fast Ethernet
LAN
FRM220-100M
Ordering Info rmation
Orde
Connector Connectivity
Type
Distance
Model Name
Description
FRM220-100M
10/100Base-TX to 100Base-FX Web smart OAM/IP
managed converter
Example:
FRM220 – 100M –
FRM220 – 100M – SC002
Note: The card is suitable for using in CH01 standalone chassis.
Connector Type
SC, S T , FC
Connectivity Distance
002: 2km
015: 15km
20A: WDM 20km A type
60A: WDM 60km A type
030: 30km
050: 50km
20B: WDM 20km B type
60B: WDM 60km B type
080: 80km
120:120km
40A: WDM 40km A type
80A: WDM 80km A type
40B: WDM 40km B type
80B: WDM 80km B type
OPTOKON, a.s. Fiber Optic Technology - Calibration Laboratory
CTC UNION TECHNOLOGIES CO., LTD.
FRM220-100M
WWW.OPTOKON.COM
www. c t c u . c o m