ZXSe Range Data Sheet Analogue addressable fire

ZXSe Range Data Sheet
Analogue addressable
fire alarm control panel
Product Overview
The ZXSe range of analogue addressable fire alarm control
panels have been designed and constructed around
proven and reliable microprocessor technology. This simple
approach has produced a modular, scalable fire alarm
platform suitable for protecting all types of premises.
Supporting a total of five industry leading protocols,
Apollo, Hochiki ESP, Nittan, Morley-IAS and System
Sensor, allows fire detection devices to be independently
selected based on performance or aesthetic appeal.
Panel Features
Networking Features
The ZXSe range of intelligent fire alarm control panels
has been designed to assist with the normal operation
of a fire detection system. Standard weekly testing is
available through a simple menu structure allowing
selection of the zones to be tested either with or without
activation of the output relays or sounders.
The Morley-IAS network is a unique, robust protocol
that can be used over long distances, and utilise many
different types of fire resistant cabling. All versions of
the ZXSe range can be connected together creating a
network of up to 99 control panels. The flexible network
can be configured in two ways:
Additionally, the status of individual devices can be
analysed to determine whether cleaning or replacement
is required.
• Shared Zone System - Each networked control panel
shares information
• Report & Control System - For multiple building sites
where information is presented at the local and master
panels only
• A compliant fault tolerant network can be created
using the additional, optional Hi-485 network card
• 99 panel network allows systems in excess of 60,000
devices to be managed
As the installation grows the ZXSe panel can expand
with the building or site by adding additional devices,
loop cards, printers or repeater panels. Additionally,
further ZXSe panels can be networked together allowing
an even bigger system to be created.
Remote (or local) printers can easily be connected to
provide a paper copy of events as and when they occur or
provide a historical record.
•
•
•
•
All major device manufacturers devices supported
Optional, local or remote printers
Walk test facility
Provide up to 72hr stand-by (subject to verification)
Software Features
The initial installation of the system is aided by
sophisticated features like AUTOLEARN. An internal
routine that will automatically detect all the devices on
the detection and peripheral loops saving valuable
commissioning time.
An off-line Windows™ configuration tool is included
to further enhance the process, making text entry and
specific, complex device programming easier. Complex
cause and effect programming is simplified through
a clearly designed user interface. Once completed
the configuration of the panel can be saved for future
reference. Enhanced features allow the complete
archiving of the control panel history log.
• Event logic – facilitates complex cross-panel
programming
• Auto-learn facility allows rapid and accurate
commissioning of devices
• Windows™ configuration tool allows off-site
programming
• Facility to print history and event logs
User Interface
A quick glance enables users to assess the condition
of the fire alarm system. Alarm and Fault conditions
are highlighted by LEDs and supported by enhanced
text descriptions on the LCD display. Clearly labelled
buttons allow users to quickly manipulate the system
providing both audible and tactile feedback of successful
operations.
The panel has 3 access levels. Level 1 is unprotected
and allows basic user functions. Level 2 is passcode
protected and allows more advanced user functions.
Level 3 is protected by a different passcode and allows
programming functions.
• 4x40 – Character LCD alphanumeric display with
back-light
• Up to 200 zone LEDs (by special request)
• Up to 10 individual level 2 user access codes
• Optional lockable glass door – provides added
security/protection
Key Features
• Multi-protocol
• Modular concept
• Simple, robust design to EN54 Parts 2 & 4
• Intuitive to use
• Easy to maintain
• Easy to expand
• Easy to network
• Easy to install
• Easy to configure
Hardware Features
ZX1Se
ZX2Se
ZX5Se
200 (max)
200 (max)
200 (max)
LED Type Zonal Indicators
20
FIRE/FAULT/TEXT/DISABLED
20
20 (Up to 200 available
on special request)
Internal Sounder
9
9
9
User Controls
Sound Alarms, Silence/Resound, Mute Buzzer, Accept, System Reset
Programming Controls
Alphanumeric multilevel keypad
LED Type General Panel
Status Indicators
FIRE, FAULT, Acknowledged, Disablement, Test, Sounder Fault,
Delayed Mode, Relays Disabled, Earth Fault, System/CPU Fault,
Sounders Disabled, Alarms Silenced, Supply Fault, Power
Serial Interface
2 serial ports with connections for optional RS485 or
RS232 plug-in communication cards
3 serial ports with
connections for optional
RS485 or RS232 plug-in
communication cards
Auxiliary Relays
1 fault and 1 fire relay voltage free, changeover outputs
contacts rated at 24V AC/DC, 1A, 0.6 PF maximum
EN54 format at 1 fault
relay and 1 programmable
relay voltage free,
changeover outputs
contacts rated at 24V
AC/DC, 1A, 0.6 pF
maximum
Sounder Outputs
2 programmable outputs. Open and short circuit
monitoring. 1A maximum per output
(Maximum total load 1.3A)
4 Programmable outputs.
Open and short circuit
monitoring. 1A maximum
per output
(Maximum total load 1.3A)
Zones
Alphanumeric multilevel keypad
Protocol Devices
Each panel is capable of supporting Apollo (Xplorer,
XP95 & Discovery), Hochiki ESP, Nittan, Morley-IAS and
System Sensor protocol devices.1
ZX1Se Loop Capacity: 1 loop 460mA maximum
ZX2Se Loop Capacity: 1 or 2 loops 460mA per loop
maximum
ZX5Se Loop Capacity: 1 to 5 loops 460mA per loop
maximum
Number
of
Devices
126
198
Apollo
Protocol
9
Hochiki
Protocol
System Nittan
Morley
Sensor Protocol Protocol
Protocol
9
9
9
9
Alphanumeric multilevel keypad
ZXSe System Example
Graphical
User Interface
Active
Repeater
Master
External
Printer
High-485
High Integrity
Network
ZX5Se
Passive
P
i
Repeater
ZX1Se
Sub-Master
ZX5Se
ZX1Se
ZX1Se
ZX2Se
ZX2Se
ZX5Se
ZX5Se
Sub-Master
Mechanical ZX1Se
ZX2Se
ZX5Se
Dimensions (mm)
400 x 400 x 135 (H x W x D)
400 x 400 x 135 (H x W x D)
500 x 500 x 195 (H x W x D)
Weight (without batteries)
10 kg
10 kg
20 kg
Colour
RAL 9002 - Grey White
RAL 9002 - Grey White
RAL 9002 - Grey White
0ºC to + 40ºC
85% non-condensing (max)
0ºC to + 40ºC
85% non-condensing (max)
Sheet steel painted,
sealed to IP30
Sheet steel painted,
sealed to IP30
Environmental Operating Limits:
Temperature
0ºC to + 40ºC
Humidity
85% non-condensing (max)
Cable Entry
14 x 20mm knock-outs in top of cabinet
24 x 20mm knock-outs top
2 x 20mm knock-outs in bottom of cabinet
24 x 20mm knock-outs bottom
400 mm
400 mm
500 mm
Sheet steel painted,
sealed to IP30
400 mm
Construction
135 mm
400 mm
135 mm
195 mm
500 mm
* not drawn to scale
Electrical
ZX1Se
ZX2Se
ZX5Se
Operating Voltage
230V AC 50Hz (+10%,-15%)
230V AC 50Hz (+10%,-15%)
230V AC 50Hz (+10%,-15%)
Maximum PSU Rating
4.2A total, comprised of 2.5A min @ 25V
(panel and loop supply) 1.75A min charger current
8.6A total, comprised of
2.25A min @ 25V (panel
supply) 2.5A min @
35V (loop supply) 1.66A
min @ 12V (printer supply)
2.2A min charger current
Loop Load
460mA maximum
460mA per loop maximum
460mA per loop maximum
Stand-by Batteries:
Minimum Capacity
Maximum Capacity
2 x 12V 7Ah
2 x 12V 12Ah
2 x 12V 7Ah
2 x 12V 12Ah
2 x 12V 12Ah
2 x 12V 24Ah
up to max 38Ah2
up to max 38Ah2
up to max 38Ah2&3
Panel Designed to Meet
EN54-4 Charging
Requirements For Larger
Batteries if Required
Notes
1
Multiple sensor protocols cannot be used in the panel simultaneously. However, different panels on the same network can support different protocols
Separate battery box required
3
Please contact your local business manager if there is a requirement to charge batteries >38Ah
2
Part Numbers
Panels
722-001-301 ZX1Se Fire Alarm Control Panel
720-001-301 ZX2Se Fire Alarm Control Panel
721-001-301 ZX5Se Fire Alarm Control Panel
Accessories
795-066-100 Apollo XP95 & Discovery Loop
Driver Card 460mA
795-048
Apollo S90 Loop Driver Card
795-058-105 Hochiki ESP Loop Driver Card 460mA
795-044-001 Nittan Loop Driver Card
795-068-100 System Sensor Loop Driver Card 460mA
795-072-100 Morley-IAS Loop Driver Card 460mA
795-005
RS232 Communication Card
795-004-001 RS485 Communication Card
795-077-020 20 Zone LED Display Indicator Card
795-077-060 60 Zone LED Display Indicator Card
795-051-001 Internal Printer
797-061
ZX1Se Bezel Kit
797-063
ZX1Se Glass Door Kit
797-061
ZX2Se Bezel Kit
797-063
ZX2Se Glass Door Kit
797-062
ZX5Se Bezel Kit
797-064
ZX5Se Glass Door Kit
020-891
USB Isolated Upload/Download Lead
797-077
ZX1SE/ZX2SE Battery Box
797-078
ZX5SE Battery Box
795-014
795-015
795-029
795-038-001
795-065
709-601-001
709-701-001
020-600-002
795-060-002
795-057
795-067-001
4 Way Programmable Relay Module,
PCB Only
4 Way Programmable Sounder Module,
PCB Only
8 Way Programmable Input Module,
PCB Only
Hi-485 Communication Module,
PCB Only
40 Way Programmable Mimic Interface
Module, PCB Only
ZXr-A Active Repeater. LCD, System
Status Indicators and User Controls for
Silence, Reset, Mute and Evacuate All
Activated by a Key Switch
ZXr-P Passive Repeater. LCD and System
Status Indicators
Bezel Kit for ZXr Series Repeaters
External Remote Printer Module
MODBUS Interface Unit
Paging System Interface Module. Suitable
for SCOPE, ASCOM/TELENOVA
Fire System Compatibility
Morley-IAS is fully committed to offering practical
solutions and supporting products that enhance your
buildings control systems.
Every care has been taken in the preparation of this datasheet but no liability can be accepted for the use of the
information therein. Design features may be changed or amended without prior notice.
© Morley-IAS by Honeywell 2011
Charles Avenue
T: +44 (0) 1444 235 556
Burgess Hill
F: +44 (0) 1273 376 894
West Sussex
E: sales@morleyias.co.uk
RH15 9UF UK
www.morley-ias.co.uk
DOC REF: M680-ZXSE(0611)
For further details on these or any other Morley-IAS products please
contact your local distributor, Morley-IAS Business Manager or via
our contact details found below. Morley-IAS by Honeywell - Providing
a control panel solution, for fire industry professionals, committed to
supporting our device partners.