Audiovox ADV200S Owner`s manual

P ICTURE
S ELECT
INPUT
VID EO
IR
S OURCE
ON OFF AUTO
VO LUME
FM
S ELECT
5
HEADPHONES
AUDI O
R
L
2
ADV200B /
ADV200S /
ADV200P
DVD PLAYER
WITH
DROP-DOWN
VIDEO
MONITOR
128-7252A
128-7252A
1 of 35
Important Notice
An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used
for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television
reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle
is in “park” or when the vehicle’s parking brake is applied.
An LCD panel or video monitor used for television reception, video or DVD play that operates when the vehicle is in gear or when the
parking brake is not applied must be installed to the rear of the driver’s seat where it will not be visible, directly or indirectly, to the
operator of the motor vehicle.
Warnings
Do not use any solvents or cleaning materials when cleaning the video monitor.
Do not use any abrasive cleaners, they may scratch the screen. Use only a lightly dampened lint free cloth to wipe the screen if it is dirty.
Lock the LCD screen in the fully closed position when not in use.
Before putting on headphones always adjust the volume setting to the lowest position.
Remember to leave the dome light switch in the off or auto positions when the vehicle is unattended, as the dome lights, if left on, can drain
the vehicle’s battery.
Do not put pressure on the screen.
Caution children to avoid touching or scratching the screen, as it may become dirty or damaged.
Television Reception
This entertainment system is designed primarily for viewing prerecorded movies or playing video games. Television reception in a moving
vehicle will be limited and in some areas will not be possible due to weak and variable signal strength. Television viewing in a stationary
vehicle will result in an improvement, but may still be marginal due to signal strength. The quality of the picture will not be consistent with
home TV reception. Reception may be affected by weather and distance from TV station. A weak signal may cause the picture to roll, be
snowy, or cause some color loss.
Licensed under one or more of the following patents,
Patent NOS. 5,775,762 and 5,927,784
-2 -
128-7252A
2 of 35
Features
Congratulations on your purchase of the ADVENT ADV200 DVD
Player with Drop-Down Video /Monitor. The ADV200 has been
designed to give you and your family many years of video
entertainment in the mobile environment. Please read the
directions that follow to familiarize yourself with the product and
to ensure that you obtain the best results from your equipment.
Please note: Installation options vary, see the individual owner’s
manuals for each component in your system to obtain a full
understanding of each component’s operation.
Safety Precaution
For safety reasons, when changing video media it is
recommended that the vehicle is not in motion, and that you do
not allow children to unfasten seat-belts to change video media
or make any adjustments to the system. System adjustments
can be accomplished using the remote control, while seatbelts remain fastened. Enjoy your Audiovox entertainment
system but remember the safety of all passengers remains the
number one priority.
•
8.5 Inch TFT (Thin Film Transistor) Active Matrix
LCD (Liquid Crystal Display) Monitor
•
OSD (On Screen Display) for Control of Picture
Quality and Functions
•
Optional TV Tuner*
•
Full Function Remote Control
•
Infrared Transmitter for IR Wireless Headphones.
•
Two Audio / Video Inputs (AV1/AUX)
•
Built-in DVD Player
•
Two Headphone Jacks
•
Built-in Five Frequency Wireless FM Modulator
(**Optional Relay Box)
•
Forward and Side Remote Sensor
•
Dome Lights with 3-Position Switch
•
Backlit Controls for Low Light Operation
•
Last Position Memory for DVD
Options
* Audiovox P/N PODTVT
** Audiovox P/N SIRSWB
-3-
128-7252A
3 of 35
Controls and Indicators Diagram
P OW ER
!
"
#
P LAY
E JE CT
S TOP
$
%
&
!
P IC TU RE
S E LE C T
2
ON OFF AUTO
S O URC E
V OL UME
FM
S E LE CT
5
'
&
VIDEO
INPUT
AUDIO
L
R
HEADPHONES
%
IR
'
!
"
#
$
&
-4 -
128-7252A
4 of 35
Control Function Descriptions
12. ( – ) Button – Used to decrease levels in the picture
adjustment mode.
1. DVD Disc insertion slot – For loading Disc.
2. POWER Button – Used to turn the system ON/OFF. Bright
red when system is on, dim when off.
13. Auxiliary Audio Right Input.
14. Auxiliary Audio Left Input.
3. EJECT (
) Button – For ejecting discs from the disc
compartment.
15. Auxiliary Video Input.
16. Side Remote Sensor Eye – Allows the remote control to
operate the ADV200, control volume to the wired headphone
jacks and control the other accessories.
4. PLAY ( ) Button – This button is used to start playback
of a disc.
5. STOP (
) Button – To stop playback.
17. Drop Down LCD Panel.
6. Infrared Transmitter and Sensor – Use to transmit audio
to the wireless headphones. Also allows the remote control
to operate the ADV200 and to control other accessories in
the system.
18. Headphone Jacks – Allow the use of wired headphones
with a 1/8” plug for listening to the video program audio.
19. Screen release – Moves in direction of the arrow to release
the drop down screen.
7. ADV200 Ventilation Opening.
8. Dome Lights – Provide additional interior illumination.
20. VOLUME ( ) Button – Use this button to raise the volume
level of the headphone jacks.
9. SOURCE Select – Used to select one of the three sources
(DVD, AV1, AUX, *TV Optional).
* Consult the PODTVT Installation/Owner’s Manual for optional
TV tuner instructions.
10. ( + ) Button – Used to increase levels in the picture adjust
mode.
11. PICTURE SELECT Button – Allows the user enter the
picture adjustment mode.
-5-
128-7252A
5 of 35
21. FM Select Button – When this button is pressed it will
turn on the wireless FM Modulator and then cycle through
FM frequencies (Channel 1, 88.3MHz; Channel 2, 88.7MHz;
Channel 3, 89.1MHz; Channel 4, 89.5MHz; Channel 5,
89.9MHz and OFF).
22. VOLUME ( ) Button – Use this button to decrease the
volume level of the headphone jacks.
Note:These buttons will not affect the volume of wireless
headphones or the wireless FM modulator. When using
these devices the volume must be adjusted with the wireless
headphone volume control or with your radio’s volume control
(see page 16, Wireless Headphones, or page 17, Wireless
FM Modulator).
23. Three position Dome Light Switch
• Auto – Automatically switches on the dome lights in
conjunction with the vehicle’s interior illumination.
• Off – The dome lights will not turn on in this position.
• On – Turns on the dome lights.
Note : Audiovox recommends the use of the Audiovox HP 275
Headphones when using wired headphones.
-6 -
128-7252A
6 of 35
Remote Control Operation
146)
1
2
3
146*
42
41
40
39
4
B AT TE RY C O V ER
Battery Installation
Before attempting to operate your Remote Control, install the
batteries as described below.
1) Turn the Remote Control face down. Using a fingernail,
lift the battery cover off.
2) Install two “AAA” batteries as shown. Make sure that
proper polarity (+ or -) is observed.
3) Align the cover tabs with the remote control and press
down until the cover clicks.
The remote control will operate the ADV200 and most Audiovox
VCP’s. It is not a universal remote control and will not control
equipment from other manufacturers.
-7-
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
128-7252A
7 of 35
Remote Control Function Descriptions
*Function control is available on the unit and the remote control.
** Not used in this model
*** The TV Option will only be displayed and the TV control functions are only available if the optional TV Tuner (P/N PODTVT) is
installed.
1. POWER Button*
Press this button to turn the ADV200 on. Press the button again to turn the ADV200 off.
2. SOURCE Button*
Each time the button is pressed, the audio / video source will change: DVD, AV1, AUX and TV***.
3. AUTO MEMORY Button (AUTO PROGRAM Button)***
When the AUTO MEMORY button is pressed, all channels are searched and channels that are detected with signals of
sufficent levels are automatically stored.
4. SKIP/SEARCH Button***
This button selects betweeen SKIP and SEARCH mode. In “SKIP mode” the TV tuner will tune and stop on channels that are
programmed into memory when CHANNEL UP/DOWN buttons are used. When the SKIP mode is disabled, the TV will stop
on all active channels.
5. ERASE/WRITE Button***
While tuned to a channel, pressing this button will store or erase the channel from memory. The stored channel numbers are
displayed in “GREEN” and the erased channel numbers are displayed in “RED”.
6. Channel Up ( ) Button
Use this button to increase the channel number*** to the desired channel and to scroll upward in menu options.
-8 -
128-7252A
8 of 35
7. MUTE Button
Press this button to mute the audio.
Pressing the button again restores the sound to the previously set level.
8. ENTER Button
Used to implement a selected setting or menu option.
9. LEFT ( ) Button
Allows the user to shift left in the menu options.
10. MENU Button
Allows the user to access the main menu.
11. RETURN Button**
12. TV Mode Select Button***
Switches certain function keys on the remote control for TV functions.
13. DVD Mode Select button
Switches certain function keys on the remote control for DVD functions.
-9-
128-7252A
9 of 35
14. DISPLAY Button
Press to display DVD Disc current information.
Press DISPLAY button
Once
Twice
3 times
4 times
5 times
6 times
7 times
8 times
DVD Player Perform
Display current TITLE , CHAPTER & elapsed time
Display current SUBTITLE
Display current AUDIO language & channel
Display current surround mode
Display current ANGLE
Display A-B current status
Display REPEAT current status
Display off
For Subtitle, Audio, Surround, Angle, A - B & Repeat, press Enter key repeatedly to change the options. These options may
vary from disc to disc.
15. FM TRANSMITTER ON/OFF Button
Turns FM Modulator power on/off.
16. AUDIO Button
Press this button to display and select the desired AUDIO language. Each time the button is pressed, the language or track
changes. NOTE: The languages & tracks you can select are vary from disc to disc.
-10-
128-7252A
10 of 35
17. ZOOM Button – Press this button to zoom the picture
Press ZOOM button
Once
Twice
3 times
4 times
5 times
6 times
7 times
OSD
DVD Player Perform
1X
2X
3X
1/2
1/3
1/4
OFF
ZOOM picture 2 times
ZOOM picture 3 times
ZOOM picture 4 times
Reduces picture to 1/2 normal size
Reduces picture to 1/3 normal size
Reduces picture to 1/4 normal size
Returns to normal size
18. PAUSE ( ) Button
Allows the user to pause the playback.
19. STOP (n) Button*
Disc playback will be stopped.
20. PREVIOUS ( ) Button
Allows the user to return to the previous chapter or track.
21. NEXT ( ) Button
Allows the user to skip to the next chapter or track.
22. REV (
) Button
Allows the user to search in a backward direction at 2, 4, 8, 16 and 32 times the normal speed.
-11-
128-7252A
11 of 35
23. FWD (
) Button
Allows the user to search in a forward direction at 2,4,8, 16 and 32 times the normal speed.
24. PLAY ( )Button*
Press this button to activate the play mode when a disc is loaded into the disc compartment.
25. ANGLE Button
Press this button to display and select the available camera angles. Each time the button is pressed, the angle will change.
NOTE: The number of angles vary from disc to disc.
26. SUBTITLE Button
Press this button to display and select the available subtitle language in DVD. Each time the button is pressed, the
subtitle language changes. NOTE: The type & number of languages for subtitles vary from disc to disc.
27. SOURCE SELECT Button**
With FM ON, used to select the Audio source to the FM Modulator, POD audio or SAT Audio (Second IR input).
With FM OFF, used to select from SAT Audio or Car Audio.
28. CHANNEL SELECT Button* (FM Select)
Selects the FM modulator Frequency (Frequency 1, 88.3MHz, Frequency 2, 88.7MHz, Frequency 3, 89.1MHz, Frequency 4,
89.5MHz, Frequency 5, 89.9MHz).
29. VCP Mode Select button
Switches certain function keys on the remote control for VCP functions.
30. Screen Mode Button
Allows the user to change screen format ( Aspect Ratio, 4:3 or 16:9 )
-12-
128-7252A
12 of 35
31. A-B Button
Allows the user to repeat playback of a DVD or CD from point A to point B.
32. REPEAT Button
Allows the user to repeat a chapter, title, track, or all of a DVD, CD or MP3.
33. Channel Down ( ) Button
Use this button to decrease the channel number*** to the desired channel and to scroll downward in the menu options.
34. SETUP Button
Allows the user to access the DVD setup menu and select various playback options (Display, OSD Language, Defaults,
Parental Control, Password, Exit Setup).
35. RIGHT (
) Button
Allows the user to shift to the right in the menu options.
36. PIX Button (PICTURE SELECT)
Each time this button is pressed, the OSD will display the “adjustment bars” for BRIGHTNESS, CONTRAST, COLOR or TINT.
Once the desired adjustment bar is displayed, use the VOLUME UP/DOWN buttons to adjust the setting. The display will
automatically turn off if no adjustments are made within 6 seconds, or if any other button is pressed.
37. VOLUME DOWN (-) Button*
Use this button to decrease the volume level of the wired headphone jacks. It is also used to make picture adjustments
in picture select mode.
-13-
128-7252A
13 of 35
38. VOLUME UP (+) Button*
Use this button to raise the volume level of the wired headphone jacks. It is also used to make picture adjustments in
picture select mode.
Note: The volume buttons will not affect the volume of wireless headphones or the wireless FM Mmodulator. When using these
devices the volume must be adjusted with the wireless headphone volume control or with your radio’s volume control
(see page 16, Headphones, or page 17, Wireless FM Modulator).
39. NUMBER Buttons
Allows the user to enter numbers 0 to 9 for selection of CD tracks, DVD chapters, and password setting.
40. IRTA ON/OFF Buttons
Turn Infrared Transmitter power ON/OFF for IR Wireless Headphone Channel A.
41. IRTB ON/OFF Buttons**
Turn Infrared Transmitter power ON/OFF for IR Wireless Headphone Channel B.
42. EJECT (
)Button*
The disc will be ejected from the disc compartment.
-14-
128-7252A
14 of 35
Turning the ADV200 On or Off
1. Sliding the screen release lock forward will unlock the LCD screen and it will drop down slightly. Pivot the screen downward until
a comfortable viewing angle is reached. The internal hinge friction will hold the screen in position while the system is in use.
2. Pressing the power button on the unit or the remote control will turn the system on or off alternately. When in use the internal
backlighting will illuminate the controls.
3. After the unit has been turned on load a disc into the disc slot (lable side up). Adjust the viewing angle by pivoting the screen to
optimize the picture quality.
4. Remember to turn the unit off and pivot the LCD to the locked position when not in use.
Overhead Dome Lights
The lights integrated into the ADV200 are controlled by a
three position slide switch. Sliding the switch to the on position
will turn the lights on. The off position will prevent the lights
from turning on at all times, and the auto position will allow
the lights to turn on and off with the vehicle’s interior lighting.
Refer to the Installation Manual for the wire connections.
NOTE: Do not leave the vehicle unattended with the dome
light switch in the on position, as this could result in a
discharged battery.
Dom e
Light
Sw itch
-15-
128-7252A
15 of 35
Remote Sensor
The ADV200 incorporates two Infrared sensors which relay signals from the
remote control to allow the unit to be controlled simply by pointing its remote
control at the remote sensor eye. The repeater function allows control of
auxiliary equipment such as an Audiovox Video Cassette Player. The infrared
sensor can relay signals from most manufacturer’s remote controls to its
respective component connected to the AV 1 input. In this case you must
use the remote control supplied with the component.
Remote
Sensor
Eye
Remote
Sensor
Eye
Accessories
Wireless Headphones
The ADV200 includes a built-in infrared transmitter for use with ADVENT Wireless Headphones (Part Number IRHSN). The volume
can then be adjusted using the controls on each headset. Any number of wireless headphones may be used but they must be
used within a line of sight from the transmitter, as infrared transmissions, like visible light travel only in a straight line. See the
documentation accompanying your Audiovox Wireless Headphones.
-16-
128-7252A
16 of 35
Wired Headphones
There are two 1/8” headphone jacks on the ADV200 that can be used with any standard wired stereo headphones. These jacks are
controlled by the volume up / down buttons on the ADV200 or the remote control.
Wireless FM Modulator
The ADV200 is equipped with buit-in wireless FM Modulator*, that allows you to listen to the ADV200 audio signal by tuning your
vehicle’s radio to the selected frequency, (88.3, 88.7, 89.1, 89.5, 89.9MHz). This feature is accessed by using either the FM transmitter
buttons on the remote (On/Off, Channel Select) or the FM Select button on the unit.
AV1 Input
The AV1 video input may be connected to a Video cassette Player (VCP), video game system, or other audio / video devices. To
access the A/V1 input, turn the ADV200 on and press the source button on the ADV200 or the Source button on the remote control
until “AV1” is displayed on the screen. Turn the video source component on with its power button or remote control. The ADV200 is
now ready to play the audio and video signals from the source connected to AV1 input. The AV1 input requires a 8010730 cable.
*NOTE: In certain areas where there are a large number of FM radio stations (e.g. large cities, urban areas), the reception of the FM
signal from the overhead pod may not be satisfactory, resulting in static, distorted sound or signal bleed thru from strong local radio
stations. This is not a defect in the product, but the result of a stronger local radio station overpowering the wireless FM transmitter in
your overhead pod.
If wireless reception is unsatisfactory, an optional wired relay box (Audiovox P/N SIRSWB) can be installed which will improve audio
quality. Please contact the installer if this is the case with your product.
-17-
128-7252A
17 of 35
AUX A/V Input
The ADV200 will accept an audio/video input through the RCA jacks located on the side of the unit. The audio / video device could be
a video game system, video camera, or other input device.
Audio/Video Out
The ADV200 provides an AV output for an optional video monitor(s). (Refer to page 6 of the Installation Guide for more details.) This
output will provide an A/V signal that duplicates the signal processed by the ADV200 to an additional monitor or video display. The
audio signal can also be used to feed an AUX input on a vehicle radio if available. Please see your installer for more information.
DVD Basics
To get the optimum use out of the DVD player, make sure you read this section completely.
Regional Coding
Both the DVD player and disc are coded by region. These regional codes must match in order for the disc to play. If the codes don’t
match, the disc won’t play. This unit’s code is region 1. Other regional codes cannot be played in this unit. The unit will display
“WRONG REGION.”
-18-
128-7252A
18 of 35
Types of Discs your DVD will play
•
•
•
DVD discs – DVDs discs which contain video.
Audio discs – Audio CDs that contain music or sound content only.
MP3 discs – A disc that contains audio files (for example, a CD-R/CD-RW with downloaded MP3 files).
Loading and Playing Discs
Before you load a disc, make sure that it is compatible with the player.
Note: the following Discs CANNOT be used with this player :
• MiniDisc
• Laserdisc
• CD-I, CD-ROM, DVD-ROM
To load and Play a Disc
When you press the Power button the unit will turn on and display the source selected. Select DVD mode and insert the disc (Label
Up) into the disc compartment. When the disc is half way in it will be automatically pulled in and play will begin.
Last Memory
The player is able to resume playback from the last position if any power interruption happens, provided the disc is not removed from
the player.
NOTE: This function is only available on DVD’s and Audio CD’s.
-19-
128-7252A
19 of 35
Settings and Adjustments
The Setup Menu contains features and options that let you customize your DVD player. For example, you can set a language for the on-screen
display, limit playback for children, load default settings for the picture quality etc.
Using the Setup Menu
1. Press the SETUP button on the remote. The Setup Menu appears
on the screen as shown in the diagram to the right. There are 5
icons on the top part of the Setup Menu. Each icon represents a
page.
Main Page
Audio Setup
Password Setup
Preference Setup
Exit Setup
2.
3.
4.
5.
6.
In order to Go to the desired page, move the highlight using the cursor button or
to the desired icon and press enter or button .
After entering the desired page, highlight the desired item using the
or cursor button and press enter.
or to select the desired options, and then press ENTER to confirm the selection.
Press
Repeat steps 3~4 to continue setting the items in the same Setup Page.
To change to another Setup page, press
until the highlight moves back to the icon on the top part of the Setup Menu. Then, repeat
steps 2~5.
Exiting the Setup Menu
Press the SETUP button again or Move the highlight to "
" icon and then press ENTER.
-20-
128-7252A
20 of 35
MAIN PAGE
TV DISPLAY
The TV DISPLAY setup allows you to adjust screen aspect ratio.
4:3 PS
This displays a wide picture on the screen with a portion of the left &
right side removed.
4:3 LB
This displays a wide picture with black bands on the upper and lower
portions of the screen.
16:9
This displays a wide picture with black bands on the upper and lower
portion of the screen. The bands will vary, depending on what aspect
ratio the disc is.
TV TYPE
The TV TYPE setup allows you to select the system to fit to the color
system of the TV to be connected.
PAL - Select this type for PAL TV
MULTI - Select this type for multi-system TV
NTSC - Select this type for NTSC TV
-21-
128-7252A
21 of 35
ANGLE MARK
The ANGLE MARK setup allows you to turn on/off the angle mark display
on the screen.
ON - The screen shows angle mark if an angle option is available on
a DVD
OFF - There is no angle mark display on the screen even though there
is an angle option available on a DVD.
OSD LANGUAGE (Language for On-Screen Display)
The OSD LANGUAGE setup allows you to select the language for the
on-screen display. The user can either select English, French, Spanish,
German or Italian for the OSD language.
CAPTIONS (Closed Caption)
The CAPTIONS setup allows you to turn on and off the closed caption
signal to be passed to the television through the video output for
decoding.
ON - To turn on the closed caption signal to be passed to the
television for decoding
OFF - To turn off the closed caption signal to be passed to the television
for decoding
-22-
128-7252A
22 of 35
AUDIO SETUP PAGE
EQ TYPE
The equalizer allows you to choose from a variety of preset equalizer
settings.
The options are : OFF, ROCK, POP, LIVE, DANCE, TECHNO,
CLASSIC and SOFT.
V SURRUOUND (Virtual Surround)
The Virtual Surround allows you to add a surround sound effect to the
audio.
ON - Turn on the virtual surround sound
OFF - Turn off the virtual surround sound
-23-
128-7252A
23 of 35
PASSWORD SETUP PAGE
PASSWORD CHANGE
This item allows you to change the password.
After you have selected the password change, the figure below is shown:
OLD PASSWORD
Input the old password or the default password ( 4 digits )
NEW PASSWORD
Input a new password ( 4 digits ) using the numbers buttons (0~9)
CONFIRM PWD
Confirm the new password by entering the same password again.
Then press ENTER to apply the changes.
NOTE: The Default Password is 3308. This password is always effective even after you have selected your own password and changed it.
To avoid the possibility of others using the default password to set the parental level and change the password, you can record this default
password in another area and delete it from this manual. Some discs can be limited depending on the age of users while some discs cannot.
-24-
128-7252A
24 of 35
PREFERENCE PAGE
The setting in this page can only be made when the player is in the Stop
mode or when there is no disc in the player.
PARENTAL CONTROL
This item allows you to limit movie playback from G to Adult. The lower
the value, the more strict the control.
G
PG
PG - 13
R
NC - 17
ADULT
After the desired rating is selected the password must be entered to
confirm the setting.
DEFAULT - RESET
The DEFAULT - RESET allows you to reset all options to factory settings.
Note : This function will not affect the parental control settings.
-25-
128-7252A
25 of 35
Playing DVDs
Press the DISPLAY button on the remote control to display the status banner. Pressing the DISPLAY button consecutively changes the
options as below.
Press DISPLAY button
Once
Twice
3 times
4 times
5 times
6 times
7 times
8 times
Information display on the screen
Current title, chapter and elasped time
Current subtitle information
Current audio language and audio channel
Current surround sound setting
Current angle setting
Current A-B setting
Current repeat status
Display off
Selecting a Chapter
You can skip to a specific chapter by using the numbers keys.
For example, if you want to skip to chapter 2, press ‘02’.
For subtitle, audio, surround, angle, A-B, and repeat, press the
Enter button repeatedly to change the options. These options may
vary from disc to disc.
Using the Repeat Feature
The default mode for the Repeat feature is OFF. Pressing REPEAT consecutively changes the repeat options:
• CHAPTER
- repeat the chapter that is playing
• TITLE
- repeat the title that is playing
• ALL
- repeat the entire disc
• REPEAT OFF - turn off repeat function.
-26-
128-7252A
26 of 35
Playing Audio CDs
When playing an audio CD, the DISPLAY banner appears automatically. It displays the current track playing, the total number of tracks
and the elapsed time for the track playing. Pressing the DISPLAY button on the remote consecutively changes the options of the display.
Press DISPLAY x 1
Press DISPLAY x 2
Press DISPLAY x 3
Press DISPLAY x 4
Press DISPLAY x 5
SINGLE ELAPSED appears along with the current track
playing, the total number of tracks and the time playing on that track
SINGLE REMAIN appears along with the current track playing,the
total number of tracks and the amount of time left of that track.
TOTAL ELAPSED appears along with the current track playing
and the total time the CD has been playing.
TOTAL REMAIN appears along with the current track playing,the
total number of tracks and the amount of time left on the CD.
Turn off the DISPLAY banner.
Selecting a Track
You can skip to a specific track by using the numbers keys. For example, if you want to skip to track7, press “07”
Using the REPEAT feature
The default mode for Repeat feature is OFF. Pressing REPEAT consecutively changes the repeat options:
• TRACK
- repeat the track that is playing
• ALL
- repeat the entire disc that is playing
• REPEAT OFF - turn off repeat function
As you toggle through the options, the repeat option changes at that time. The track, for example, repeats once that track has ended. The
selected repeat option loops repeatedly until you turn it off.
Selecting a Play Mode
In CD playback, the play mode can be changed by pressing ZOOM. Pressing ZOOM consecutively changes the play mode options:
• RANDOM - play the songs in random order
• SHUFFLE
-play the songs in random order
• PROGRAM - play the songs on the disc in the order you have programmed. (See page 28)
• Normal (no OSD is displayed)
-27-
128-7252A
27 of 35
Program Play
You can play the tracks on a disc in the desired order using the PROGRAM function.
1.
Press ZOOM until the PROGRAM table is displayed on the screen
as shown in diagram to the right.
2.
Input the desired tracks using numbers buttons ( 0~9 ) on the
remote as shown in diagram. If you want to program more than 10
and press ENTER to go to the next
songs, you can highlight
page.
3.
After creating the programmed list, move the hightlight to START,
and then press ENTER to start playback of the programmed songs.
When the playback of the programmed songs has finished, the DVD player stops and the program list is deleted. To repeat playing the
program list, use the Repeat feature during the program playback.
Deleting a programmed list
To delete the programmed list, press STOP while the programmed list is being played or change to another play mode using the ZOOM button.
-28-
128-7252A
28 of 35
Playing MP3 Discs
MP3 is a format for storing digital audio. An audio CD-quality song can be compressed into the MP3 format with very little loss of quality, while
taking up much less space. CD-R/CD-RW discs that have been encoded in MP3 format can be played on your DVD player. The DVD player
plays the songs in the order they were burned on to the disc.
Press the DISPLAY button on the remote to display the current play mode and to change the time display between time elapsed and time
remain.
• Time elapsed is the time that the song has been playing.
•
Time remaining is the amount of time left for the song being played.
Selecting Folders and Songs
When an MP3 is loaded in the player, the navigation menu appears automatically.
1.
Press
or
to move the highlight to the desired folder and
press ENTER to display the songs in the folder.
2.
or
to move the highlight to the desired song and
Press
press ENTER to begin playback of the highlighted song.
-29-
128-7252A
29 of 35
Skipping Songs
Use the Next ( ) button on the remote control to move to the next song. Use the Previous (
) button to move to the previous song.
Selecting a Play Mode
You can choose what order the songs will play on a disc temporarily. The default play mode is FOLDER. Press REPEAT consecutively to
choose the desired play mode. The play mode options are :
•
•
•
•
•
•
FOLDER
SHUFFLE
RANDOM
SINGLE
REPEAT ONE
REPEAT FOLDER
Plays the songs in a folder in the order they were recorded.
Plays the songs in a folder in random order.
Plays the songs in a folder in random order.
Plays a selected song.
Repeat the song that is playing.
Repeat the folder that is playing.
-30-
128-7252A
30 of 35
Troubleshooting
SOLUTION
PROBLEM
Poor in vehicle
radio reception
IR sensor
inoperative
PROBLEM
• Check the condition of the vehicle’s
radio antenna.
• Verify that the antenna is fully raised.
• If a relay box (SIRSWB) has been
insatalled, make sure that the FM
Modulator is turned OFF.
• If a wired RF modulator has been
installed, verify that it is turned OFF
by using the remote or switch.
Play starts, but
then stops
immediately
• The disc is dirty. Clean it.
• Condensation has formed. Allow
player to dry out.
No sound or
distorted sound
• Make sure your DVD player is
Can’t advance
through a movie
• You can’t advance through the
• Verify that the batteries in the remote
are fresh.
• Verify that the remote sensor eye is
not obstructed.
• Verify that the infrared transmitter is
affixed over the sensor eye of the
component to be controlled.
Disc won’t play
• Insert a disc with the label side facing
up.
• Check the type of disc you put into
disc tray. This DVD player only plays
DVD’s, audio CDs and MP3s.
• Both the unit and the disc are coded
by region. If the regional codes don’t
match, the disc can’t be played. This
DVD player is Region Number 1.
SOLUTION
connected properly. Make sure all
cables are securely inserted into the
appropriate jacks.
• If you are using the IR headphones,
make sure you turn on the IR power.
• Make sure the FM Modulator is ON
and the proper Frequency has been
selected.
opening credits and warning
information that appears at the
beginning of movies because the
disc is programmed to prohibit that
action.
-31-
128-7252A
31 of 35
SOLUTION
PROBLEM
The icon (
appears on
screen
Picture is
distorted
)
The feature or action cannot be
completed at this time because:
1. The disc’s software restricts it.
2. The disc’s software doesn’t support
the feature (e.g., angles)
3. The feature is not available at the
moment.
4. You’ve requested a title or chapter
number that is out of range.
• The disc might be damaged. Try
another disc.
• It is normal for some distortion to
appear during forward or reverse
scan.
No forward or
reverse scan
• Some discs have sections that
•
prohibit rapid scanning or title and
chapter skip.
If you try to skip through the warning
information and credits at the
beginning of a movie, you won’t be
able to. This part of the movie is often
programmed to prohibit skipping
through it.
-32-
128-7252A
32 of 35
Replacement Parts
Remote Control
136-3855
Specifications
LCD Backlighting
Edge Light Tube
Resolution
1440 x 234
Pixels
336,960
Operation Temperature
32 -140º F (0 - 60º C)
Storage Temperature
-4 - 176º F (-20 - 80º C)
Backlight life
15,000 Hours
Video Display System
NTSC/PAL
Headphone Audio Output
0.03W @ 32 ohms
Video Output
1.0Vp-p @ 75 ohms
Power Source
12V DC
Dimensions
WXHXL
10.75” X 1.5” X 14.75”
(273) X (38.1) X (374.6)
-33-
128-7252A
33 of 35
ADVENT LIMITED WARRANTY
AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that, should this product or any part thereof (except
game controllers), under normal use and conditions, be proven defective in material or workmanship within 36 months from the date of original purchase, such
defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor.
If your new vehicle’s radio, CD/DVD player is covered by the manufacturer’s warranty for a period of 48 months as set forth in the OEM Warranty Booklet,
the company will extend the Advent Mobile Video product warranty for the same period of time. This is not applicable to extended warranty purchases
beyond the original manufacturer’s warranty. A game controller, if supplied, is similarly warranteed for ninety (90) days.
To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (e.g. dated bill of sale),
specification of defect(s), transportation prepaid, to the Company at the address shown below.
This Warranty does not extend to the elimination of externally generated static or noise, to correction of antenna problems, to costs incurred for installation,
removal or reinstallation of the product, or to damage to digital memory cards, discs, speakers, accessories, or vehicle electrical systems.
This Warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged through alteration, improper
installation, mishandling, misuse, neglect, accident, or by removal or defacement of the factory serial number/bar code label(s). THE EXTENT OF THE COMPANY'S
LIABILITYUNDERTHISWARRANTYISLIMITEDTOTHEREPAIRORREPLACEMENTPROVIDEDABOVEAND,INNOEVENT,SHALLTHECOMPANY'SLIABILITY
EXCEEDTHEPURCHASEPRICEPAIDBYPURCHASERFORTHEPRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,
SHALLBELIMITEDTOTHEDURATIONOFTHISWRITTENWARRANTY. ANYACTIONFORBREACHOFANYWARRANTYHEREUNDERINCLUDINGANYIMPLIED
WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITH IN A PERIOD NOT EXCEEDING 12 MONTHS AFTER EXPIRATION OF THE WARRANTY. IN
NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY,
EXPRESS OR IMPLIED, WHATSOEVER. No person or representative is authorized to assume for the Company any liability other than expressed herein in
connection with the sale of this product.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage so the above
limitations or exclusions may not apply to you. This Warranty gives you specific legal rights and you may also have other rights which vary from state to state.
U.S.A. : AUDIOVOX ELECTRONICS CORPORATION, 150 MARCUS BLVD., HAUPPAUGE, NEW YORK 11788 1-800-645-4994
CANADA: CALL 1-800-645-4994 FOR LOCATION OF WARRANTY STATION SERVING YOUR AREA
128-7188A
-34-
128-7252A
34 of 35
© 2004 ADVENT, 150 Marcus Blvd., Hauppauge, NY 11788
128-7252B
-35-
128-7252A
35 of 35