Samsung YEPP Sports YP-60Z Specifications

- Sports Function Support
- Encoding Function
- Removable Storage Device
- 3D surround sound
- MP3 & WMA Playback
- FM Reception
- 15-Hour Continuous Play
AH68-01509N (Rev 0.0)
Contents
Additional Usage
Preparations
Safety Instructions
Battery Charger Safety
Cautions for Recharging
Features
Accessories
Location of Controls (yepp)
4
6
7
8
11
12
Connection to Computer
Connecting the yepp to a PC
Manual Installation of the USB Driver
Using the removable storage
● Downloading/Uploading files
● Disconnecting the USB cable
Installing yepp Studio
● To View Help on yepp Studio
Installing Fitness Manager
Using Fitness Manager
14
18
22
22
23
24
26
28
30
Basic Usage
Playing Music and Turning Off the Device
Adjusting the Volume / Hold Function
Searching for Music/Voice Files
Encoding MP3s
Listening to FM Radio
Encoding From FM Radio
2
34
35
36
37
38
39
Loop Repeating
MENU Mode
Changing Modes
Setting Advanced Functions
Playing Folders
Selecting the Play Mode
Selecting Sound Effects
Managing Files
● Deleting
● Formatting
Setting Times
● WATCH TIME SET / POWER OFF TIME
● SLEEP TIME / BACKLIGHT TIME
Setting the Environment
● DISPLAY
- INFORMATION / CONTRAST
● SOUND CONTROL
- WOW LEVEL
- ENCODE BIT RATE
- BEEP ON/OFF / DEFAULT VOLUME
● Setting Additional Regional Functions
- LANGUAGE / UNIT
Using Navigation
Setting FM
Using Sports Function
40
41
42
43
44
45
46
48
48
48
49
49
50
51
51
51
52
52
53
53
54
54
55
56
57
Appendix
MENU Table
62
Customer Support
Troubleshooting
Specifications
64
66
3
Safety Instructions
Read and understand all the instructions to avoid injury to yourself and damage to the equipment.
Do not expose to extreme
temperatures (above 95°F or below
23°F). Do not expose to moisture.
Do not apply excessive pressure
to the device.
Do not let any foreign matter
spill into the device.
Earphones
Follow Traffic Safety Instructions
● Do not use the earphones while driving an automobile or riding a bicycle.
It’s not only dangerous, but also against the law.
● An accident may result if you turn up the volume of the earphones too high while walking
down the street, especially when crossing at intersections.
Protect your ears
Do not place heavy objects on
top of the device.
Do not expose to chemicals such
as benzene and thinners.
Do not use the unit near any
appliance that generates a strong
magnetic field.
● Do not turn the volume up too high.
Doctors warn against prolonged exposure to high volumes.
● Stop using the device or turn the volume down if you get ringing in your ears.
Ambient operating conditions
● Ambient temperature : 5°C ~ 35°C (41°F ~ 95°F)
Do not expose to direct
sunlight or heat sources.
Do not store in dusty areas.
Do not try to disassemble and
repair the device yourself.
● Humidity : 10 ~ 75%
Environmental Information
● Follow local guidelines for waste disposal when discarding packaging, batteries,
and old electronic appliances.
● yepp packaging uses cardboard, polyethylene etc., and does not use
✽ Please be aware that we disclaim all responsibility for damages from loss of saved or recorded
data due to breakdown, repair or other causes.
4
any unnecessary materials.
5
Battery Charger Safety
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN
Cautions for Recharging
!
A charger is provided with the YP-60.
Please be sure to only use the provided adapter.
Plug the charger into a wall outlet.
✽ When recharging is complete,
The uninsulated parts inside the charger can
cause electric shock.
For your safety, do not open the charger’s case.
“FULLY CHARGED” is shown in the display window.
✽ Recharging continues to take place even when
the USB cable is connected.
Caution
!
Read this User Manual to prevent any problems that
may occur while using the charger.
● Do not charge longer than the specified charge time to avoid risk of fire.
● Do not plug several devices into the same outlet.
● Do not use a damaged internal rechargable battery or recharge adapter.
● When using the rechargeable battery for the first time or after several
months of non-use, fully charge it first.
Warning
● Use the charger away from water sources to avoid fire or electric shock.
Caution
● To avoid electric shock, Use the charger only with a power outlet that matches
the converter's plug.
● Make sure that the charger's plug is inserted all the way into the outlet.
6
● Do not charge the rechargeable battery for more than 6 hours.
● Overcharging or overdischarging will reduce battery life.
● You should check the recharging time and switch to a new internal rechargable battery
when the battery life becomes low.
● The rechargeable battery is a consumable item and its capacity will decrease gradually.
● To prolong the life of your battery, use the fully charged battery until it is completely
discharged, and then fully charge it again before use. If you charge a battery that is not
completely drained, the battery operating time will decrease. In this case, repeat the full
charge/discharge cycle several times.
● Do not let metallic objects, such as necklaces or coins, come into contact with the
terminals (metallic parts) of the charger and the built-in rechargeable battery.
A fire or electric shock may result.
● Be careful not to touch the recharge adapter with wet hands.
7
Sports Function Support
3D surround sound
● Using
● You
the Consumed Calories, Heartrate and Stopwatch functions will help you
exercise much more efficiently and scientifically.
●
will hear deep bass and 3D surround sound.
is a trademark of SRS Labs, Inc.
WOW technology is incorporated under license from SRS labs, Inc.
Encoding Function
● You
can make an MP3 file from an external source using the ENC jack
on the main unit.
● You can also convert an FM radio program into an MP3 file in real time.
MP3 & WMA Playback
● MP3
Removable Storage Device
●
8
is an MPEG1 Layer3 audio format.
is a Microsoft Windows Media audio format.
● WMA
You can easily copy and paste files to the yepp player using Windows Explorer.
9
Accessories
FM Reception
● Listening
to an FM program is made easy with Auto Search and Frequency
Memory functions.
Player
Sports Earphone
Arm band
Finger Clip
Necklace case
Sound
● You
can adjust the equalizer manually.
15-Hour Continuous Play
● Use
a lithium polymer rechargable battery in order to play continuously for
up to 15 hours.
Earphone
Necklace extension cable Line In cable
USB cable
Charger
Installation CD User manual
Model
YP-60 H
YP-60 V
YP-60 X
YP-60 Z
Built-in memory
128MB
256MB
512MB
1GB
● The capacity of the useable built-in memory is less than indicated as the internal firmware
uses a part of the memory as well.
● Design of accessories is subject to change, for the purposes of improvement, without notice.
10
11
Location of Controls (yepp)
Display
Heart Rate Measurement Sensor
Earphone Jack
Equalizer, SRS indicator
Display
Hold Switch
Folder Play Indicator
Calorie Measurement Indicator
Remaining Battery
Power indicator
Sleep Time indicator
MENU/
Loop Repeating Button
Move to Track/
Speed Search Button
Play/Stop/Pause
On/Off Button
Time indicator
07:32 AM
Track 1
Mode indicator
Volume Button
001
Sports Function Button
Nor
ENC/NAVI.
Button
USB Cable
Connection Port
NOR
00:01:30
Title (track & artist) indicator
Playtime indicator
Track Number indicator
Play/Stop/Pause indicator
Play mode/Interval repeat indicator
ENC Jack
Reset Hole
Note
● If the device won’t respond even after pressing the buttons, reboot it by pressing the Reset Hole with a pin.
12
13
Connecting the yepp to a PC
System
Requirements.
Before connecting yepp to PC, make sure to install
USB driver. If “Add New Hardware Wizard” appears,
press the [Cancel] button and install USB driver.
The PC system must meet the
following specifications:
Installing software
● Pentium 133MHz or greater.
2
Choose the language you wish to use.
3
Click [Next] in the series of windows
that appear.
● Windows 98SE/ME/2000/XP.
● 40MB of available hard disk space
● CD-ROM drive.
(double speed or greater)
● USB port (1.1) supported.
● VGA graphics.
● DirectX 8.0 or above.
1
Insert the Installation CD into the CD-ROM drive.
The picture shown below appears.
Select [yepp USB Driver].
Continued...
14
15
Connecting the yepp to a PC
Connecting the yepp to a PC with a USB cable
How to check the USB driver
4
5
● Windows 98/ME:
Connect a USB cable to the USB port on the computer.
Control Panel → System → Device Manager →
Disk drives → SAMSUNG YP-60
Connect the opposite end of the USB cable to the USB cable
port on the right side of the yepp.
● If you disconnect the USB cable from your PC while
implementing a command or initializing during
USB driver installation, your PC may not function correctly.
● Windows 2000:
Control Panel → System → Hardware →
Device Manager → Disk drives →
SAMSUNG YP-60 USB Device
● Windows XP:
The USB driver is installed with a message saying that
it is searching for a new device. You may not see the
display screen during installation.
Go to the device manager to check that
installation has been successfully completed.
7
Upon installation of the USB driver
"SAMSUNG YP-60" will appear in the
[System Properties] → [Device Manager].
USB connect cable
16
6
Control Panel → System → Hardware →
Device Manager → Disk drives →
SAMSUNG YP-60 USB Device
8
When the USB driver is not installed automatically, refer to the next page.
17
Manual Installation of the USB Driver
Go to “Downloading/Uploading Files” if the USB driver is in place.
Follow these steps if the USB driver is not in place.
When an error occurs during installation of the USB driver
1
4
After selecting the driver,
click on [Update Driver].
5
Select a compatible driver,
click on [Next] to finish.
Check the device manager.
● Windows 98,ME:
Control Panel → System → Device Manager
● Windows 2000:
Control Panel → System → Hardware →
Device Manager
● Windows XP:
Control Panel → System → Hardware →
Device Manager
18
2
Check if there is a device listed with an
exclamation point or a question mark
(displayed as unknown device or USB device).
3
Double click on the device listed with an
exclamation point or a question mark.
19
Manual Installation of the USB Driver
In Windows 98
Click [Next] in the series of windows that appear.
Select [Specify a location] Š
and then select
[CD-ROM]/driver for win98.
● You must reboot your computer to complete the installation.
20
21
Using the removable storage
Downloading/Uploading files
Disconnecting the USB cable
After completing the file transmission, you must disconnect the cable in the following way:
1
2
3
Connect the yepp to your PC and turn it on.
1
Open Windows Explorer on PC.
Select the file to save and drag-and-drop it into the removable disk icon.
(In numerical, alphabetical order)
2
Double-click on the green arrow in
the taskbar on the bottom right of
the window.
When the [Hardware device stopped] message appears,
press the [OK] button and disconnect the USB cable.
Notice
22
●
Music File can be played only when it is downloaded in the
MUSIC folder or the folder right below of MUSIC folder.
●
The order of music files is not relative to the replay order
when you select a Removable Disk in Windows Explorer.
●
While either DOWNLOAD or UPLOAD on the LCD of yepp
is turned on, do not remove USB cable. Your PC might
malfunction.
If “READY” will be displayed on the LCD of yepp, it means
that transmission is completed. Then you can remove USB
cable.
N
Note
●
On search engine of Windows98, put the mouse on the portable drive and click the right mouse
button to execute “Eject”.
(When “READY” is displayed on the LCD of yepp after executing “Eject”, remove USB cable.)
23
Installing yepp Studio
1
Insert the Installation CD into CD-ROM drive.
Select [yepp Studio].
2
24
3
Click [Next] in the series of windows that appear.
●
Please refer to Help for more information on how to use yepp Studio.
Select language
25
Installing yepp Studio
To View Help on yepp Studio
Note
Run yepp Studio and press F1.
● Help will appear.
Move the arrow to the top of yepp Studio and right click on the mouse.
The following selection window will appear.
● Click on Help and the Help window will appear.
● Music recognition technology and related data are provided by Gracenote and Gracenote CDDB®
Music Recognition ServiceSM.
● CDDB is a registered trademark of Gracenote. The Gracenote logo and logotype, the Gracenote CDDB
logo and logotype, and the "Powered by Gracenote CDDB" logo are trademarks of Gracenote. Music
Recognition Service and MRS are service marks of Gracenote.
● If a firewall is installed on the PC, it may not be possible to import CDDB information.
N
26
27
Installing Fitness Manager
28
1
Insert the Installation CD into your PC's CD-ROMdrive.
Select [Fitness Manager].
2
Choose the language you wish to use.
3
Click [Next] in the series of windows that appear.
29
Using Fitness Manager
Log In
1
2
3
When connecting to Fitness Manager for
the first time, click [New Account] and
create a new username of 6 letters or less.
Turn on the yepp and connect it to your PC.
Click [yepp Sports Fitness Manager] on the desktop.
4
Press the [OK] button after entering your
personal information.
5
After entering a username and password,
log in by clicking [Login].
Š Set a nickname for the
YP-60 that you are using.
- No more than 6 English
characters can be entered.
Note
● If Fitness Manager is run after connecting the device to the PC, the measured
data saved on the device will be updated automatically to the PC and then deleted.
● Fitness Manager cannot be used while yepp Studio is running.
30
31
Using Fitness Manager
Setting Up a User
1
2
3
Turn on the yepp and connect it to your PC.
[Calorie Chart]
● You can check the calories consumed
as a result of exercise in units of years,
months and days.
: Displays calorie data for one year based
on the current point.
Click [Account] after selecting
Fitness Manager.
: Displays calorie data for one month based
on the current point.
After setting up the user,
click the [OK] button.
: Displays calorie data by time as of today.
Setting Up a New User
Deleting a User
[Biorhythm]
● You can check the biorhythm of the
Using Fitness Manager
selected user.
[Calorie List]
● You can see the measured data that has been saved.
- Data : Displays the data and time when a user takes exercise.
- Exercise time : Displays the exercise in Hour and Minute.
- Starting HR : Displays Heart rate(bmp) before exercise.
- Final HR : Displays Heart rate(bmp) after exercise.
- Calorie Data : Displays the calorie consumption(kcal).
- Remark : Displays the contents that a user enters.
Note
● If [Edit Profile] is clicked, personal information can be changed.
● The resulting graph of the biorhythm reflects the statistical values of the
measured data and so may be different from the actual values.
● Refer to Help for more detailed information about using yepp Studio.
32
33
Playing Music and Turning Off the Device
Turning Power On and Off
● Power On : Press and hold the
● Power Off : Press and hold the
Adjusting the Volume/Hold Function
Adjusting the Volume
button to turn on the power.
button to turn off the power.
Press the
,
buttons to adjust the volume.
07:32 AM
Nor
30
001
Playing Music
Press the
button.
07:32 AM
sports
Track 1
001
NOR
07:32 AM
● Press the
, buttons once to adjust the volume by one step.
Press and hold the
, buttons to increase or decrease the volume in greater increments.
In Hold mode, all buttons are disabled.
Nor
Track 1
001
NOR
GOOD BYE
00:01:30
Note
● WMA files can be played only as music files with a compression rate of 64Kbps-192Kbps,
that can be created in Windows Media Player (Version 8.0).
● The power off time can be set in the menu.
34
00:01:30
HOLD Function
● While in Pause mode, briefly press
again to resume playback.
● The volume can be adjusted in increments between 0 and 40.
Nor
Pausing Music
button to pause playback.
00:01:30
Note
● Playback starts.
Press the
NOR
Slide the
switch on the player in the
direction of the arrow.
● When the button is pressed,
HOLD!
the “
HOLD!” message will appear on
the display.
35
Searching for Music/Voice Files
To search for specific parts during play
Encoding MP3s
1
Connect the Audio Output port on the external audio source
(or the Line Out port) to the ENC port on the device with the Line in cable.
● A desired passage can be searched for by pressing and holding down the
,
buttons during play.
To change tracks during play
● If the
button is pressed during play, the next track is played.
button is pressed before five seconds have passed since starting to play a track,
the previous track is played and if the
button is pressed after five seconds,
the current track is replayed from the beginning.
● If the
To change tracks when stopped
● If the
,
buttons are pressed when stopped, the yepp moves
to the previous or next track, respectively.
2
3
If the ENC button is pressed, MP3 encoding begins.
● If the
button is pressed, encoding is paused and if the
the encoding resumes.
button is pressed again,
If the ENC button is pressed during encoding, the encoding stops and an
encoding file is created.
● Encoding is performed in order (ENC001, ENC002, etc.)
and files are saved in the MP3 format after encoding.
Note
Note
● VBR(Variable Bit Rate) file: A file that constantly changes the compression rate according
to the type of sounds, such as their pitch, in the file.
● With VBR files, pressing the
button within 5 seconds from the start of the track may not result
in the previous track playing.
● Files that were downloaded in MP2 or MP1 and had their file extension changed to MP3 may not play.
● The bit rate can be set to 64Kbps, 96Kbps and 128Kbps.
● During encoding, there is no beeping sound and the button lights and
backlight do not illuminate.
Caution
● Do not disconnect the Line cable during Encoding.
● If the battery is not sufficiently charged, encoding will not be done.
36
● Adjust the volume of the external audio source to a suitable level and encode it.
If the volume level is extremely high, the sound quality may not be good.
37
Listening to FM Radio
Encoding From FM Radio
Select FM mode first. (Refer to “Changing Modes”)
Doing FM encoding
Manual Search for a Frequency
,
buttons to search manually for
the desired frequency.
1
● Press the
Press the ENC button during FM reception.
● Encoding of the currently transmitted
07:32 AM
FM broadcast begins.
91.90MHz
FMCH — —
2
Press the ENC button again.
● A file is created and the encoding stops.
● Files are saved in order, starting FM001,
FM002...etc., and stop automatically when
the memory is full.
Automatic Search for a Frequency
● Press and hold the
,
buttons in order to
search for and stop at frequencies with reception.
07:32 AM
91.90MHz
FM Scan
Note
● During encoding, there is no beeping sound and the button lights and back light do not illuminate.
● Encoded files will become 64Kbps files after they are encoded from FM.
38
39
Loop Repeating
MENU Mode
Starting Point
While playing music files, press the
button briefly at the
beginning of the loop you want to
set.
A
Ending Point
Press and hold the
button while in Music/Voice Mode.
After navigating with the , buttons, press the
button to select the desired menu.
Menu mode is cancelled if the
button is pressed.
Press the
button briefly
again to set the end of the loop.
A
appears in the display.
The loop is played repeatedly.
B
MENU
MENU
EXIT
MODE SELECT
MODE SELECT
SETTING
SETTING
NAVIGATION
MENU
MENU
NAVIGATION
SETTING
FM SETTING
EXIT
NAVIGATION
FM SETTING
appears in the display.
07:32 AM
Nor
07:32 AM
Nor
Track 1
001
A
00:01:30
Track 1
001
A
B
00:01:38
● MODE SELECT : When changing modes.
● SETTING : When changing the yepp’s advanced functions.
● NAVIGATION : When performing a simple search for saved music files.
● FM SETTING : When saving frequencies automatically or checking saved frequencies.
● EXIT : To exit MENU.
Note
● Press the
button briefly to cancel the loop.
● Loop Repeat is automatically released if you Speed Search with the
,
buttons.
Note
● In MENU mode, no input for 30 seconds will cancel the MENU mode.
40
41
Changing Modes
1
2
3
Press and hold the
After using the
,
button.
button to move to MODE SELECT, press the
Move to the mode you want by using the
press the
button.
MODE SELECT
EXIT
MUSIC
FM
,
MODE SELECT
FM ENC
LINE ENC
EXIT
EXIT
LINE ENC Mode
MODE SELECT
MODE SELECT
FM
FM ENC
LINE ENC
MUSIC
FM
FM ENC
FM ENC Mode
button.
1
Select SETTING in the MENU. (Refer to “MENU Mode”)
2
In SETTING, after moving to the desired function with the
press the
button.
,
button,
buttons, and then
MODE SELECT
LINE ENC
EXIT
MUSIC
Music Mode
42
Setting Advanced Functions
SETTING
EXIT
FOLDER PLAY
PLAY MODE
SETTING
ENVIRONMENT
EXIT
FOLDER PLAY
SETTING
TIME
ENVIRONMENT
EXIT
SETTING
FILE
TIME
ENVIRONMENT
SETTING
SOUND EFFECT
FILE
TIME
SETTING
PLAY MODE
SOUND EFFECT
FILE
FM Mode
43
Playing Folders
1
Selecting the Play mode
● The saved folders are shown.
FOLDER PLAY
F
2
1
2
Select FOLDER PLAY in SETTING menu.
In PLAY MODE, after moving to the desired folder
with the , button press the
button.
MUSIC
Love You
LOCK
07:32
A
M
Nor
● The files in the selected folder are played.
● FOLDER PLAY does not work when there
aren’t any files in the folder.
● Move to each respective mode by selecting
MUSIC, FM ENC or LINE ENC.
Select PLAY MODE in SETTING menu.
In PLAY MODE, after moving to the desired mode with the
press the
button.
,
button,
PLAY MODE
PLAY MODE
PLAY MODE
EXIT
NORMAL
REPEAT ONE
NORMAL
REPEAT ONE
REPEAT ALL
REPEAT ONE
REPEAT ALL
SHUFFLE
Track 1
001
NOR
00:01:30
● NORMAL : To play all the tracks in order one time.
● REPEAT ONE : To repeat one track.
● REPEAT ALL : To repeat all tracks.
● SHUFFLE : To play tracks at random.
● EXIT : To move to the higher-level menu.
44
45
Setting Sound Effects
1
2
EQ
Select SOUND EFFECT in SETTING menu.
In SOUND EFFECT, after moving to the desired sound mode with the
press the
button.
SOUND EFFECT
EXIT
EQ
SOUND EFFECT
TRUBASS
WOW
SRS
EXIT
,
button,
) : You will hear 3D Stereo sound.
) : This is a bass boost feature that adds fullness to the sound.
● WOW : This feature allows you to enjoy the SRS and Trubass features simultaneously.
● EXIT : To move to the higher-level menu
● SRS (
● TRUBASS (
1
2
Use the , buttons to move
to the setting you want
(out of the 4 settings available)
and press the
button to select.
If you want to manually adjust
the equalizer, select User EQ
and Bass/Treble.
● BASS/TREBLE can each be
EQ
EQ
EXIT
NORMAL
CLASSIC
JAZZ
ROCK
NORMAL DBB
EQ
EQ
USER EQ
EXIT
NORMAL
CLASSIC DBB
JAZZ DBB
ROCK DBB
USER EQ
USER EQ
EXIT
BASS
TREBLE
BASS
TREBLE
EXIT
adjusted from 0 to 10 with
the ,
button.
BASS
TREBLE
6
5
Note
● Please adjust the volume to a suitable level, as the volume may increase in the SRS setting.
● This unit supports sampling frequencies of 32KHz, 44.1KHz or 48KHz.
● You can only set SRS functions in Music Mode.
46
47
Managing Files
Setting Times
Select TIME in SETTING menu.
Deleting
1
2
Select DELETE and then move to the file you
wish to delete.
● If EXIT is selected, files in other folders can
also be selected.
3
WATCH TIME SET
Select FILE in SETTING.
Select CONFIRM in the DELETE CONFIRM Window
after pressing the
button.
● The selected file is deleted.
● Use the
MUSIC DELETE
EXIT
001:Track 1.mp3
002:Track 2.mp3
,
buttons to set the clock time manually.
● Select UPDATE to finish setting the time after
setting manually.
DELETE CONFIRM
CONFIRM
CANCEL
Formatting
POWER OFF TIME
● Use the
,
buttons to set the POWER OFF TIME.
● The power off time can be set from 3 to 180 seconds.
1
2
Select FILE in SETTING.
FILE
Select FORMAT in FILE.
DELETE
FORMAT
EXIT
● Formatting is performed if CONFIRM is selected.
After stopping playback, the power is turned off
automatically if no buttons have been pressed
during the set time.
● When set to NO POWER OFF, the power does not
turn off even when the device is stopped.
POWER OFF TIME
120 sec
FORMAT
Note
● All files are deleted if the yepp is fomatted.
48
CONFIRM
CANCEL
49
Setting Times
Setting the Environment
Select ENVIRONMENT in the SETTING menu.
SLEEP TIME
, buttons to set the SLEEP TIME.
● The sleep time can be set from 3 to 180 minutes.
The power turns off automatically after the set time
has passed.
● When set to NO SLEEP, the power does not turn off
automatically.
DISPLAY
● Use the
SLEEP TIME
INFORMATION
● Use the
BACKLIGHT TIME
● Use the
,
buttons to set the Backlight “ON” time.
● The setting range for Backlight-On Time is 0 to 30
Select DISPLAY in the ENVIRONMENT.
150 min
BACKLIGHT TIME
seconds.
● When set to Always On, the backlight stays on
continuously.
, buttons to select the music mode and
select the content to be displayed at the top of the Screen
Display Window.
● PLAY TIME : Displays the current play time
● REMAIN TIME : Displays the remaining play time
● REMAIN MEMORY : Displays the remaining memory
● BIT RATE : Displays the wave bit rate that is being played
INFORMATION
EXIT
PLAY TIME
REMAIN TIME
15 sec
CONTRAST
● Use the
,
buttons to set the Contrast.
● The setting range for the contrast, which adjusts the
brightness of the screen, is from 0 to 15.
CONTRAST
11
Note
● The backlight does not illuminate when the residual battery level is insufficient.
50
51
Setting the Environment
ENCODE BIT RATE
● Use the
, buttons to set the desired MP3
encoding bit rate.
● You can set the desired bit rate to 64kbps, 96kbps or
128kbps when doing MP3 encoding.
SOUND CONTROL
Select SOUND in ENVIRONMENT.
WOW LEVEL
ENCODE BIT RATE
96 kbps
BEEP ON/OFF
● The levels of SRS and TRUBASS
can be adjusted.
, buttons to select the
level you want.
● The level for SRS and TRUBASS can
each be set within the range of 0 to 10.
SRS LEVEL
● Use the
TRUBASS LEVEL
8 Level
8 Level
optimized to the connected device.
speaker or carpack (car cassette adapter)
by using the , buttons.
52
,
buttons to set the BEEP mode.
● BEEP ON : A beep sounds each time a button is
pressed.
● BEEP OFF : No beep sounds when a button is pressed.
BEEP ON/OFF
ON
OFF
DEFAULT VOLUME
● If OPTIMIZATION is selected, the SRS function is
● Set the desired device to earphone, headphone,
● Use the
OPTIMIZATION
EARPHONE
HEADPHONE
CARPACK
● Use the
,
buttons to set the DEFAULT VOLUME.
● It is possible to set the default volume to a value
between 0 and 40. If the power is turned on again after
having adjusted the volume above the default value,
music is played at the default volume.
● If the power is turned on again after the volume was set to
within the default value, the music is replayed at the
previously played volume.
DEFAULT VOLUME
22
53
Setting the Environment
Using Navigation
✻ Up to 256 files can be searched for each folder.
Setting Additional Regional Functions
1
Select COUNTRY in SETTING menu.
Press and hold the
button.
● The file that is currently being played is shown.
LANGUAGE
, button to select the desired menu
language from among nine languages.
● The menu is shown in the selected language.
● SETTING, ENVIRONMENT, COUNTRY and
LANGUAGE are shown only in English.
NAVIGATION
EXIT
001 : Track 1.mp3
002 : Track 2.mp3
● Use the
LANGUAGE
ITALIAN
JAPANESE
KOREAN
2
UNIT
, button to select kg/m or lb/ft as the
measurement units.
After using the
,
button to move to NAVIGATION, press the
button.
● If EXIT is selected, you can move to another folder.
NAVIGATION
NAVIGATION
NAVIGATION
EXIT
001:Track 1.MP3
002:Track 2.MP3
002:Track 2.MP3
EXIT
001:Track 1.MP3
EXIT
MUSIC
Love You
● Use the
UNIT
EXIT
kg/m
lb/ft
54
3
Select the file or folder that you want to play.
●
,
: When entering a folder or when playing a life, when playing a file.
●
: When moving to a higher-level folder. When leaving NAVIGATION mode.
●
, : When moving to a file or folder in the same directory.
55
Setting FM
Using Sports Function
✽ Caution when measuring your heart rate
Automatic Storage of a Frequency
1
2
Press and hold the
- Don’t press too hard when placing your finger on the sensor.
- Don’t move your finger during measurement.
button while in FM Mode.
● FM SETTING is shown.
After moving to AUTO PRESET using the
button, press the
button.
,
Setting the User
07:32 AM
● Frequencies within the range of 87.5MHz to
108MHz are automatically selected and stored.
● Frequencies are automatically stored,
starting from 1.
91.90MHz
1
2
Searching Stored Frequencies
1
2
Press and hold the
button while in FM Mode.
3
● FM SETTING is shown.
Press the
button after using the ,
to move to the desired FM CHANNEL.
buttons
Before using the sports functions select the user.
FM Scan
Press the Sports Function Select
button.
PROFILE
Select PROFILE in SPORTS FUNCTION.
EXIT
TRY IT
Select a user ID registered on the PC or TRY IT
and set the age, sex, height and weight
of the user.
EDIT PROFILE
FM CHANNEL
CH1 95.9 MHz
CH2 91.9 MHz
CH3 89.1 MHz
4
Select CREATE after the setting is complete.
NAME
AGE
GENDER
: GUEST
: 20
: MALE
Note
● You can store up to 20 frequencies.
Note
● When measuring after selecting TRY IT, data is not saved.
56
57
Using Sports Function
Measuring Calories Consumed
Measure your heart rate before and after exercise in order
to find out the calories burned.
1
2
CALORIE COUNTER
USER
Before starting exercise, press the Sports Function
Select
button.
Select CALORIE COUNTER in SPORTS FUNCTION.
● Shows the selected user and whether or not
measurement has started.
3
Measuring Heartrate
Try It
END
CALORIE
1st Check
1
2
CALORIE COUNTER
CALORIE COUNTER
● Measurement of heart rate starts.
Measuring
button.
Press the
button in SPORTS FUNCTION
and select HEART RATE MONITOR.
● The selected user and whether a
Place your finger
on sensor and
press button
After placing your finger on the sensor on the
top of the device, press the
button.
Press the Sports Function Select
HEART RATE
USER
Try It
measurement has started will be shown.
HEART RATE
Place your finger
on sensor and
press button
82bpm
● When the heart rate measurement finishes, the
heartrate that was measured is saved automatically
and a “ ” indicator is shown in the display window.
4
3
Measure your heart rate one more time after finishing
your exercise as in #2 and #3 above.
● Heart rate measurement starts.
Measuring
82bpm
the heart rate is shown on the screen.
● The calories are shown in kcal units.
58
HEART RATE
● When measurement is complete,
● Shows the calories consumed by your exercise.
5
After putting your finger on the sensor on the
top of the device, press the
button.
HEART RATE
If you want to save the data, select CREATE.
● The measured data is saved.
S
72
E
101
082
59
Using Sports Function
Measuring Lap Time
Checking the Database
1
2
3
Press the Sports Function Select
You can measure the user’s interval time when exercising,
such as when jogging or running a marathon.
button.
VIEW CALORIE
Select DATABASE in SPORTS FUNCTION.
To see the consumed calories measured,
select VIEW CALORIES. To see the heart rate,
select VIEW HEART RATE.
● Shows the most recently measured data.
STOP WATCH function
1
2
3
60
S
72
CALORIE
D 03.01.01
E
T
1
Press the Sports Function Select
2
Press the ENC/NAVI. button.
3
Press the
measurement.
button twice.
● Shows the STOP WATCH.
101
: 576
12:07
VIEW HEART RATE
HEART RATE
: 96
DATE
: 03.01.01
: 12:07
TIME
● Time measurement starts.
button during time
● “LAP” is shown and the lap time is recorded every
Press the Sports Function Select
button twice.
● Shows the STOP WATCH.
time the
button is pressed.
● A maximum of nine lap times can be recorded.
● Press the
Press the ENC/NAVI. button.
● Time measurement starts.
button to record up to
nine lap times and then press the
button to stop.
The nine lap times and ending time are shown.
Press the ENC/NAVI. button one more time.
● The time measurement finishes.
61
MENU Table
● Use
62
the
,
button to navigate and then select using the
button.
63
Troubleshooting
The software doesn’t work
The buttons do not work.
● Refer to the recommended PC specifications.
● Check the Hold switch setting.
● Press the RESET hole on the side of main unit with pin smaller than the hole.
The yepp does not work and the LCD displays nothing.
● Check the condition of the rechargable battery.
● Press the RESET hole on the side of the main unit with a pin.
● If a problem continues after you reset the main unit, try to use after formatting.
Since format is not supported in PC, make sure to format using the Format function in the menu
of main unit.
The yepp keeps turning off.
● In Stop mode, the power is automatically turned off after ten seconds (changes depending on settings).
● Check to see if there are files saved in it.
Something is wrong with the play time displayed during Play mode.
In PLAY mode, music is not played after pressing the
● Verify that the device is currently set to Music mode.
● Check to see if MP3 or WMA files are saved in the built-in memory.
● Check to see if the HOLD switch is locked.
● Check if the REC button is on.
Files cannot be downloaded.
● Check the condition of the rechargable battery.
● Check the connection between yepp and computer.
● Check and/or replace the battery, turn on the yepp's power.
button
● The “VBR SONG” message is displayed while VBR (Variable Bit Rate) files are playing.
LCD window is dark
● Check Contrast.
Strange characters are displayed on the screen during playback.
● Change the language setting in the menu.
External case of yepp gets dirty.
● Wipe out with eraser or wet towel after squeezing out moisture.
Backlight does not work.
● Check the backlight setup.
● When the current and voltage of the rechargeable battery are low,
the backlight automatically stays off in order to play longer.
64
65
Specifications
Model
Built-in Memory capacity
Voltage
Playing time
Recharge time
Maximom number of files that can be saved
Dimensions/Weight
Case
Noise Ratio
Earphones Jack Output Power
Output Frequency Range
Operating Temperature Range
FM Frequency
FM Signal to Noise Ratio
FM T.H.D
FM Useable Sensitiivity
File Support
66
YP-60
128MB(YP-60 H)/256MB(YP-60 V)/512MB(YP-60 X)/1GB(YP-60 Z)
3.7V (Li-polymer battery)
Lasts up to 15hours (MP3 128Kbps, Vol level 20)
Approximately three hours.
Up to 256 files (per folder).
39X93X17mm/47g (Battery included)
Plastic
80dB with 20KHz LPF
6mW(Max 10mW)/CH (16 Ω)
20Hz~20KHz
-5 ~ +35˚C(23~95˚F)
87.50 ~ 108.00 MHz
50dB
1%
10dB
MPEG1/2/2.5 Layer3(8Kbps ~ 320Kbps, 8KHz ~ 48KHz)
WMA (64Kbps ~ 192Kbps, 32KHz, 44.1KHz, 48KHz)
MEMO