Abridged user’s manual
(Canada version)
CS6719/CS6719-17/CS6719-2/CS6719-26
DECT 6.0 cordless telephone
This Abridged user’s manual provides you with basic
installation and use instructions.
After reading this manual, you will learn how to:
Install the telephone
1
2
Install telephone base & charger
Install handset battery
Program common settings
4
Set voicemail number
Set date and time
5
Set handset ringer volume
6
Set quiet mode
3
Use common operations
7
8
9
Directory
Speed dial
Caller ID
We recommend you refer to the full set of installation and
operation instructions at www.vtechcanada.com. For
customer service, visit www.vtechcanada.com or call
1 (800) 267-7377.
Before using this VTech product, please read Important safety instructions
on page 9 of this user’s manual.
You can expand your telephone system by adding expansion handsets
(CS6709, purchased separately). This telephone base supports up to
five handsets.
Telephones identified with this logo have reduced noise and interference
when used with most T-coil equipped hearing aids and cochlear implants. The
TIA-1083 Compliant Logo is a trademark of the Telecommunications Industry
Association. Used under license.
Compatible with
Hearing Aid T-Coil
T
TIA-1083
®
The ENERGY STAR program (www.energystar.gov) recognizes and
encourages the use of products that save energy and help protect our
®
environment. We are proud to mark this product with the ENERGY STAR label
indicating it meets the latest energy efficiency guidelines.
Parts checklist
Your package contains:
• Handset
• Battery compartment cover
• Charger with power adapter
• Battery
• Telephone base
• Telephone line cord
• Telephone base power adapter
• Wall mount bracket
• Abridged user’s manual
(1 for CS6719/CS6719-17)
(2 for CS6719-2/CS6719-26)
(1 for CS6719/CS6719-17)
(2 for CS6719-2/CS6719-26)
(1 for CS6719-2/CS6719-26)
1
(1 for CS6719/CS6719-17)
(2 for CS6719-2/CS6719-26)
Install telephone base & charger
Click!
DSL filter
Plug!
Plug!
Plug!
Click!
The telephone base is ready for tabletop use. If you want to change to wall
mounting, see page 8 for details.
2
Install handset battery
1
3 Light on!
Battery Pack / Bloc-piles :
(2.4V Ni-MH)
WARNING / AVERTISSEMENT :
DO NOT BURN OR PUNCTURE BATTERIES.
NE PAS INCINÉRER OU PERCER LES PILES.
Made in China / Fabriqué en chine
THIS SIDE UP / CE CÔTÉ VERS LE HAUT
2
Plug!
Charge for at least 30 minutes before initial settings.
Charge for 11 hours before initial use.
ECO mode
This power conserving technology reduces power
consumption for optimal battery performance.
The ECO mode activates automatically whenever the
handset is synchronized with the telephone base.
The handset shows ECO when the ECO mode activates.
HANDSET 1
ECO
10:15 P M
ECO
12/18
3
Set voicemail number
Your telephone supports voicemail feature which requires subscription
from your telephone service provider. Contact your telephone service
provider �����������������������������������������������������
for more information and assistance about using your
voicemail service.
You can save the voicemail number to
easy access.
1 on each handset for
To set voicemail number:
1. Press MENU >> Press
/ to Settings >> Press SELECT.
2. Press / to Voicemail # >> Press SELECT.
3. Enter the voicemail number >> Press SELECT.
While entering numbers, you can:
• Press DELETE to erase a digit.
• Press / to move the cursor to the left or right.
• Press and hold PAUSE to insert a dialing pause (a P appears).
• Press TONE to add (shown as ) or QUIET# to add # (shown as ).
To retrieve voicemail messages:
Press and hold
4
1.
Set date and time
If you subscribe to caller ID service, the date and time are set automatically
with each incoming call. You can also set the date and time manually.
1. Press MENU >> Press
/ to Set date/time >> Press SELECT.
2. Enter month (MM), date (DD) and year (YY) >> Press SELECT.
3. Enter hour (HH) and minute (MM) >> Press / for AM/PM
>> Press SELECT.
5
Set handset ringer volume
You can adjust the ringer volume level, or turn the ringer off.
1. Press MENU >> Press
/ to Ringers >> Press SELECT twice.
2. Press / to sample each volume level >> Press SELECT.
6
Set quiet mode
You can turn on the quiet mode for a period of time. During this period, all
tones (except paging tone) are muted.
To set and turn on:
1. Press and hold QUIET#.
2. Enter the duration (1-12 hours) >> Press SELECT.
To turn off:
Press and hold QUIET#.
7
Directory
The directory stores up to 50 entries which are shared by all
system handsets.
To add a directory entry:
1. Enter the phone number >> Press MENU/SELECT twice.
2. Enter the name >> Press SELECT.
While entering names and numbers, you can:
• Press DELETE to backspace and erase a digit or character.
• Press / to move the cursor to the left or right.
• Press 0 to add a space (for entering names only).
• Press and hold PAUSE to insert a dialing pause (a P appears).
• Press TONE to add (shown as ) or QUIET# to add # (shown as ).
To review and dial a directory entry:
1. Press
.
/ to browse to the desired directory;
or use the dialing keys to start a name search.
3. Press / to dial.
2. Press
To edit a directory entry:
1. When the desired entry displays >> Press SELECT.
2. Edit the number >> SELECT.
3. Edit the name >> SELECT.
To delete a directory entry:
1. When the desired entry displays >> Press DELETE.
2. The screen displays Delete contact? >> Press SELECT.
8
Speed dial
You can copy up to 9 directory entries into the speed dial locations
(0 and 2-9) so that you can dial them more quickly.
To assign a speed dial entry:
1. Press MENU >> Press
/ to Directory >> Press SELECT.
2. Press / to Speed dial >> Press SELECT.
3. Press / to a desired location >> Press SELECT.
4. Press / to a desired directory entry >> Press SELECT.
To dial a speed dial entry:
Press and hold a dialing key (0 or 2-9) to dial the number stored in the
corresponding location.
To delete a speed dial entry:
1. Press MENU >> Press
/ to Directory >> Press SELECT.
/ to Speed dial >> Press SELECT.
3. Press / to a desired location >> Press DELETE >> Press SELECT.
2. Press
9
Caller ID
This product supports caller ID services provided by most telephone
service providers. The caller ID log stores up to 50 entries.
The handset displays XX missed calls when you have incoming calls that
have not been answered.
To review and dial a caller ID entry:
1. Press CID >> Press
/ to the desired caller ID entry.
• When the desired entry appears, press QUIET#
repeatedly to show different dialing options.
2. Press
/
to dial.
To erase the missed call indicator:
CID
When you have reviewed all the missed calls, the missed
call indicator is erased.
If you want to erase the missed call indicator without reviewing the
caller ID log, press and hold CANCEL on the idle handset.
Handset operation
• Press repeatedly to review the
redial list.
• Add a dialing pause while dialing or
entering a number.
• Review the directory.
• Increase the listening volume.
• Show the menu.
• Select an item or save an entry or
setting in a menu.
• Make or answer a call.
• Answer a call waiting call.
• End a call.
• Review the caller ID log.
• Decrease the listening volume.
• Mute a call.
• Delete a digit or character.
• Make or answer a call using the
speakerphone.
Install wall mount bracket (optional)
1
2
B
Unplug!
Unplug!
3
5
Slide the base down!
4
Plug!
Click!
B
Important safety instructions
When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric
shock and injury, including the following:
.
Read and understand all instructions.
2.
Follow all warnings and instructions marked on the product.
3.
Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for
cleaning.
4.
Do not use this product near water such as near a bath tub, wash bowl, kitchen sink, laundry tub or a swimming pool, or in
a wet basement or shower.
5.
Do not place this product on an unstable table, shelf, stand or other unstable surfaces.
6.
Slots and openings in the back or bottom of the telephone base and handset are provided for ventilation. To protect them
from overheating, these openings must not be blocked by placing the product on a soft surface such as a bed, sofa or rug.
This product should never be placed near or over a radiator or heat register. This product should not be placed in any area
where proper ventilation is not provided.
7.
This product should be operated only from the type of power source indicated on the marking label.
If you are not sure of the type of power supply in your home or office, consult your dealer or local
power company.
8.
Do not allow anything to rest on the power cord. Do not install this product where the cord may be walked on.
9.
Never push objects of any kind into this product through the slots in the telephone base or handset because they may
touch dangerous voltage points or create a short circuit. Never spill liquid of any kind on the product.
0. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility. Opening
or removing parts of the telephone base or handset other than specified access doors may expose you to dangerous
voltages or other risks. Incorrect reassembling can cause electric shock when the product is subsequently used.
. Do not overload wall outlets and extension cords.
2. Unplug this product from the wall outlet and refer servicing to an authorized service facility under the following conditions:
• When the power supply cord or plug is damaged or frayed.
• If liquid has been spilled onto the product.
• If the product has been exposed to rain or water.
• If the product does not operate normally by following the operating instructions. Adjust only those controls that
are covered by the operation instructions. Improper adjustment of other controls may result in damage and often
requires extensive work by an authorized technician to restore the product to normal operation.
• If the product has been dropped and the telephone base and/or handset has been damaged.
• If the product exhibits a distinct change in performance.
3. Avoid using a telephone (other than cordless) during an electrical storm. There is a remote risk of electric shock from
lightning.
4. Do not use the telephone to report a gas leak in the vicinity of the leak. Under certain circumstances, a spark may
be created when the adapter is plugged into the power outlet, or when the handset is replaced in its cradle. This is a
common event associated with the closing of any electrical circuit. The user should not plug the phone into a power outlet,
and should not put a charged handset into the cradle, if the phone is located in an environment containing concentrations
of flammable or flame-supporting gases, unless there is adequate ventilation. A spark in such an environment could
create a fire or explosion. Such environments might include: medical use of oxygen without adequate ventilation;
industrial gases (cleaning solvents; gasoline vapors; etc.); a leak of natural gas; etc.
5. Only put the handset of your telephone next to your ear when it is in normal talk mode.
6. The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not
designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet.
SAVE THESE INSTRUCTIONS
Precautions for users of implanted cardiac pacemakers
Cardiac pacemakers (applies only to digital cordless telephones):
Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the
interference between portable wireless telephones and implanted cardiac pacemakers. Supported by the U.S. Food and Drug
Administration, WTR recommends to physicians that:
Pacemaker patients
•
•
•
Should keep wireless telephones at least six inches from the pacemaker.
Should NOT place wireless telephones directly over the pacemaker, such as in a breast pocket, when it is turned ON.
Should use the wireless telephone at the ear opposite the pacemaker.
WTR’s evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless telephones.
Operating range
This cordless telephone operates with the maximum power allowed by the Federal Communications Commission (FCC). Even
so, this handset and telephone base can communicate over only a certain distance - which can vary with the locations of the
telephone base and handset, the weather, and the layout of your home or office.
When the handset is out of range, the handset displays Out of range or no pwr at base.
If there is a call while the handset is out of range, it may not ring, or if it does ring, the call may not connect well when you press
. Move closer to the telephone base, then press
to answer the call.
If the handset moves out of range during a telephone conversation, there may be interference. To improve reception, move
closer to the telephone base.
Maintenance
Taking care of your telephone
Your cordless telephone contains sophisticated electronic parts, so it must be treated with care.
Avoid rough treatment
Place the handset down gently. Save the original packing materials to protect your telephone if you ever need to ship it.
Avoid water
Your telephone can be damaged if it gets wet. Do not use the handset outdoors in the rain, or handle it with wet hands. Do not
install the telephone base near a sink, bathtub or shower.
Electrical storms
Electrical storms can sometimes cause power surges harmful to electronic equipment. For your own safety, take caution when using
electrical appliances during storms.
Cleaning your telephone
Your telephone has a durable plastic casing that should retain its luster for many years. Clean it only with a soft cloth slightly dampened
with water or mild soap. Do not use excess water or cleaning solvents of any kind.
Remember that electrical appliances can cause serious injury if used when you are wet or standing in water. If the telephone
base should fall into water, DO NOT RETRIEVE IT UNTIL YOU UNPLUG THE POWER CORD AND TELEPHONE LINE
CORD FROM THE WALL. Then remove the telephone by the unplugged cords.
About cordless telephones
•
Privacy: The same features that make a cordless telephone convenient create some limitations. Telephone calls are transmitted
between the telephone base and the cordless handset by radio waves, so there is a possibility that the cordless telephone
conversations could be intercepted by radio receiving equipment within range of the cordless handset. For this reason, you should
not think of cordless telephone conversations as being as private as those on corded telephones.
•
Electrical power: The telephone base of this cordless telephone must be connected to a working electrical outlet. The electrical
outlet should not be controlled by a wall switch. Calls cannot be made from the cordless handset if the telephone base is
unplugged, switched off or if the electrical power is interrupted.
•
Potential TV interference: Some cordless telephones operate at frequencies that may cause interference to televisions and
VCRs. To minimize or prevent such interference, do not place the telephone base of the cordless telephone near or on top of
a TV or VCR. If interference is experienced, moving the cordless telephone farther away from the TV or VCR often reduces or
eliminates the interference.
•
Rechargeable batteries: Exercise care in handling batteries in order not to create a short circuit with conducting material such as
rings, bracelets and keys. The battery or conductor may overheat and cause harm. Observe proper polarity between the battery
and the battery charger.
•
Nickel-metal hydride rechargeable batteries: Dispose of these batteries in a safe manner. Do not burn or puncture the battery.
Like other batteries of this type, if burned or punctured, they could release caustic material which could cause injury.
The RBRC ® seal
®
The RBRC seal on the nickel-metal hydride battery indicates that VTech Communications, Inc. is voluntarily participating in
an industry program to collect and recycle these batteries at the end of their useful lives, when taken out of service within the
United States and Canada.
®
The RBRC program provides a convenient alternative to placing used nickel-metal hydride batteries into the trash or municipal
waste, which may be illegal in your area.
®
®
VTech’s participation in RBRC makes it easy for you to drop off the spent battery at local retailers participating in the RBRC
program or at authorized VTech product service centers. Please call
1 (800) 8 BATTERYTM for information on Ni-MH battery recycling and disposal bans/restrictions in your area. VTech’s
involvement in this program is part of its commitment to protecting our environment and conserving natural resources.
®
RBRC is a registered trademark of Rechargeable Battery Recycling Corporation.
10
Limited warranty
What does this limited warranty cover?
The manufacturer of this VTech Product warrants to the holder of a valid proof of purchase (“Consumer” or “you”) that the Product and
all accessories provided in the sales package (“Product”) are free from defects in material and workmanship, pursuant to the following
terms and conditions, when installed and used normally and in accordance with the Product operating instructions. This limited warranty
extends only to the Consumer for Products purchased and used in the United States of America and Canada.
What will VTech do if the Product is not free from defects in materials and workmanship during the limited warranty
period (“Materially Defective Product”)?
During the limited warranty period, VTech’s authorized service representative will repair or replace at VTech’s option, without charge,
a Materially Defective Product. If we repair the Product, we may use new or refurbished replacement parts. If we choose to replace the
Product, we may replace it with a new or refurbished Product of the same or similar design. We will retain defective parts, modules,
or equipment. Repair or replacement of the Product, at VTech’s option, is your exclusive remedy. VTech will return the repaired or
replacement Products to you in working condition. You should expect the repair or replacement to take approximately 30 days.
How long is the limited warranty period?
The limited warranty period for the Product extends for ONE (1) YEAR from the date of purchase. If VTech repairs or replaces a Materially
Defective Product under the terms of this limited warranty, this limited warranty also applies to the repaired or replacement Product for a
period of either (a) 90 days from the date the repaired or replacement Product is shipped to you or (b) the time remaining on the original
one-year warranty; whichever is longer.
What is not covered by this limited warranty?
This limited warranty does not cover:
1. Product that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal operation or
handling, neglect, inundation, fire, water or other liquid intrusion; or
2. Product that has been damaged due to repair, alteration or modification by anyone other than an authorized service representative of
VTech; or
3. Product to the extent that the problem experienced is caused by signal conditions, network reliability, or cable or antenna systems; or
4. Product to the extent that the problem is caused by use with non-VTech accessories; or
5. Product whose warranty/quality stickers, product serial number plates or electronic serial numbers have been removed, altered or
rendered illegible; or
6. Product purchased, used, serviced, or shipped for repair from outside the United States of America or Canada, or used for commercial
or institutional purposes (including but not limited to Products used for rental purposes); or
7. Product returned without a valid proof of purchase (see item 2 below); or
8. Charges for installation or set up, adjustment of customer controls, and installation or repair of systems outside the unit.
How do you get warranty service?
To obtain warranty service, please visit our website at www.vtechcanada.com or call 1 (800) 267-7377.
NOTE: Before calling for service, please review the user’s manual - a check of the Product’s controls and features may save
you a service call.
Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are responsible
for delivery or handling charges incurred in the transport of the Product(s) to the service location. VTech will return repaired or
replaced Product under this limited warranty. Transportation, delivery or handling charges are prepaid. VTech assumes no risk for
damage or loss of the Product in transit. If the Product failure is not covered by this limited warranty, or proof of purchase does not
meet the terms of this limited warranty, VTech will notify you and will request that you authorize the cost of repair prior to any further
repair activity. You must pay for the cost of repair and return shipping costs for the repair of Products that are not covered by this
limited warranty.
What must you return with the Product to get warranty service?
1. Return the entire original package and contents including the Product to the VTech service location along with a description of the
malfunction or difficulty; and
2. Include a “valid proof of purchase” (sales receipt) identifying the Product purchased (Product model) and the date of purchase or
receipt; and
3. Provide your name, complete and correct mailing address, and telephone number.
Other limitations
This warranty is the complete and exclusive agreement between you and VTech. It supersedes all other written or oral
communications related to this Product. VTech provides no other warranties for this Product. The warranty exclusively
describes all of VTech’s responsibilities regarding the Product. There are no other express warranties. No one is authorized to
make modifications to this limited warranty and you should not rely on any such modification.
State/Provincial Law Rights: This warranty gives you specific legal rights, and you may also have other rights, which vary from
state to state or province to province.
Limitations: Implied warranties, including those of fitness for a particular purpose and merchantability (an unwritten warranty
that the Product is fit for ordinary use) are limited to one year from the date of purchase. Some states/provinces do not allow
limitations on how long an implied warranty lasts, so the above limitation may not apply to you. In no event shall VTech be liable
for any indirect, special, incidental, consequential, or similar damages (including, but not limited to lost profits or revenue, inability
to use the Product or other associated equipment, the cost of substitute equipment, and claims by third parties) resulting from
the use of this Product. Some states/provinces do not allow the exclusion or limitation of incidental or consequential damages,
so the above limitation or exclusion may not apply to you.
Please retain your original sales receipt as proof of purchase.
11
FCC, ACTA and IC regulations
FCC Part 15
This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal
Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user’s authority
to operate the equipment.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation. Privacy of communications may not be ensured when using this telephone.
To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by
a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC
criteria. The handset may be safely held against the ear of the user. The telephone base shall be installed and used such that parts of the
user’s body other than the hands are maintained at a distance of approximately 20 cm (8 inches) or more.
This Class B digital apparatus complies with Canadian ICES-003.
FCC Part 68 and ACTA
This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for
Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the
format US:AAAEQ##TXXXX. This identifier must be provided to your telephone service provider upon request.
The plug and jack used to connect this equipment to premises wiring and the telephone network must comply with applicable Part 68
rules and technical requirements adopted by ACTA. A compliant telephone cord and modular plug is provided with this product. It is
designed to be connected to a compatible modular jack that is also compliant. An RJ11 jack should normally be used for connecting to a
single line and an RJ14 jack for two lines. See the installation instructions in the user’s manual.
The Ringer Equivalence Number (REN) is used to determine how many devices you may connect to your telephone line and still have
them ring when you are called. The REN for this product is encoded as the 6th and 7th characters following the US: in the product
identifier (e.g., if ## is 03, the REN is 0.3). In most, but not all areas, the sum of all RENs should be five (5.0) or less. For more
information, please contact your telephone service provider.
This equipment may not be used with Party Lines. If you have specially wired alarm dialing equipment connected to your telephone line,
ensure the connection of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm
equipment, consult your telephone service provider or a qualified installer.
If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected. Repairs to this
telephone equipment can only be made by the manufacturer or its authorized agents. For repair procedures, follow the instructions
outlined under the Limited warranty.
If this equipment is causing harm to the telephone network, the telephone service provider may temporarily discontinue your telephone
service. The telephone service provider is required to notify you before interrupting service. If advance notice is not practical, you will be
notified as soon as possible. You will be given the opportunity to correct the problem and the telephone service provider is required to
inform you of your right to file a complaint with the FCC. Your telephone service provider may make changes in its facilities, equipment,
operation, or procedures that could affect the proper functioning of this product. The telephone service provider is required to notify you if
such changes are planned.
If this product is equipped with a corded or cordless handset, it is hearing aid compatible.
If this product has memory dialing locations, you may choose to store emergency telephone numbers (e.g., police, fire, medical) in these
locations. If you do store or test emergency numbers, please:
Remain on the line and briefly explain the reason for the call before hanging up.
Perform such activities in off-peak hours, such as early morning or late evening.
Industry Canada
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference, including interference that may cause undesired operation.
The term ‘’IC:‘’ before the certification/registration number only signifies that the Industry Canada technical specifications
were met.
The Ringer Equivalence Number (REN) for this terminal equipment is 1.0. The REN is an indication of the maximum number of devices
allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only
to the requirement that the sum of the RENs of all the devices does not exceed five.
This product meets the applicable Industry Canada technical specifications.
Technical specifications
Frequency control
Crystal controlled PLL synthesizer
Transmit frequency
Handset: 1921.536-1928.448 MHz
Telephone base: 1921.536-1928.448 MHz
Channels
5
Nominal effective range
Maximum power allowed by FCC and IC. Actual operating range may vary according to
environmental conditions at the time of use.
Power requirements
Handset: 2.4V Ni-MH battery
Telephone base: 6V AC @ 300mA
Charger: 6V AC @ 300mA
Memory
Handset directory:
50 memory locations; up to 30 digits and 15 characters
Handset caller ID log:
50 memory locations; up to 24 digits and 15 characters
VTECH TELECOMMUNICATIONS LTD.
A member of THE VTECH GROUP OF COMPANIES.
Distributed in the U.S.A. by VTech Communications, Inc., Beaverton, Oregon 97008.
Distributed in Canada by VTech Technologies Canada Ltd., Richmond, B.C. V6W 1L5.
VTech is the registered trademark of VTech Holdings Limited.
Copyright © 2013 for VTECH TELECOMMUNICATIONS LTD.
All rights reserved. Printed in China.
12
91-006554-030-100