MSI | User manual | MS-6852,PC54GBT_CE REPORT-4
Add to my manuals44 Pages
MSI MS-6852: Experience Wireless Freedom with Enhanced Connectivity
The MSI MS-6852 empowers you with seamless wireless connectivity, enabling you to connect to the internet, transfer files, and enjoy Bluetooth capabilities. With its 802.11g technology, it delivers enhanced speed and reliability for your wireless connections.
advertisement
▼
Scroll to page 2
of 44
Report No.: 048L022EI Test Report Product Name Wireless 11g + Bluetooth Combo PCI Card Model No. MS-6852, PC54GBT Applicant MICRO-STAR INT’L Co., LTD Address No 69, Li-De st., Jung-He City, Taipei Hsien, Taiwan, R.O.C. Date of Receipt Jul. 28, 2004 Issued Date Aug. 09, 2004 Report No. 048L022EI The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. Page: 1 of 35 Version:1.0 Report No.: 048L022EI Test Re port Certification Issued Date : Aug. 09, 2004 Report No. : 048L022EI Accredited by DNV, Nemko and NIST (NVLAP) Product Name Wireless 11g + Bluetooth Combo PCI Card Applicant MICRO-STAR INT’L Co., LTD Address No 69, Li-De st., Jung-He City, Taipei Hsien, Taiwan, R.O.C. Manufacturer MICRO-STAR INT’L Co., LTD Model No. MS-6852, PC54GBT Rated Voltage AC 230V/50Hz Trade Name MSI Measurement Standard ETSI EN 300 328:V1.4.1 (2003-04) Measurement Procedure ETSI EN 300 328:V1.4.1 (2003-04) Test Result Complied The test results relate only to the samples tested. The test report is under the previsions of Directive 1999/5/EC, Article 3.2. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. Documented By : ( Tested By Rita Huang : ( Approved By ) Jeff Wu ) : ( Gene Chang ) Page: 2 of 35 Version:1.0 Report No.: 048L022EI TA B L E O F C O N T E N T S 1. 1.1. 1.2. 1.3. 1.4. 1.5. 2. 2.1. 2.2. 2.3. 2.4. 2.5. 2.6. 2.7. 2.8. 3. 3.1. 3.2. 3.3. 3.4. 3.5. 3.6. 3.7. 3.8. 4. 4.1. 4.2. 4.3. 4.4. 4.5. 4.6. 4.7. 4.8. 5. 5.1. 5.2. 5.3. 5.4. 5.5. 5.6. Description Page GENERAL INFORMATION ....................................................................................................................... 5 EUT Description............................................................................................................................................5 Tested System Details....................................................................................................................................6 Configuration of tested System .....................................................................................................................6 EUT Exercise Software .................................................................................................................................6 Test Facility………………………………………………………………………………………………....7 Effective radiated Power............................................................................................................................... 8 Test Equipment..............................................................................................................................................8 Test Setup…………………………………………………………………………………………………...8 Test Condition ...............................................................................................................................................8 Limits……………………………………………………………………………………………………….8 Test Procedure ...............................................................................................................................................9 Uncertainty………………………………………………………………………………………………….9 Test Specification ..........................................................................................................................................9 Test Result…………………………………………………………………………………………………..9 Peak Power Density.................................................................................................................................... 10 Test Equipment............................................................................................................................................10 Test Setup………………………………………………………………………………………………….10 Test Condition .............................................................................................................................................10 Limits………………………………………………………………………………………………………10 Test Procedure .............................................................................................................................................11 Uncertainty………………………………………………………………………………………………...11 Test Specification ........................................................................................................................................11 Test Result…………………………………………………………………………………………………11 Frequency Range ........................................................................................................................................ 12 Test Equipment............................................................................................................................................12 Test Setup………………………………………………………………………………………………….12 Test Condition .............................................................................................................................................12 Limits………………………………………………………………………………………………………12 Test Procedure .............................................................................................................................................13 Uncertainty………………………………………………………………………………………………...13 Test Specification ........................................................................................................................................13 Test Result…………………………………………………………………………………………………13 Spurious Emission ...................................................................................................................................... 14 Test Equipment............................................................................................................................................14 Test Setup………………………………………………………………………………………………….14 Test Condition .............................................................................................................................................15 Limits………………………………………………………………………………………………………15 Test Procedure .............................................................................................................................................16 Uncertainty………………………………………………………………………………………………...16 Page: 3 of 35 Version:1.0 Report No.: 048L022EI 5.7. Test Specification ........................................................................................................................................16 5.8. Test Result…………………………………………………………………………………………………16 6. Measurement Uncertainty Values............................................................................................................... 17 7. EMC Reduction Method During Compliance Testing................................................................................ 18 8. Test Result .................................................................................................................................................. 19 8.1. Test Data of Effective Radiated Power........................................................................................................20 8.2. Test Data of Peak Power Density ................................................................................................................22 8.3. Test Data of Frequency Range.....................................................................................................................24 8.4. Test Data of Spurious Emission...................................................................................................................26 Attachment 1: EUT Test Photographs Attachment 2: EUT Detailed Photographs Page: 4 of 35 Version:1.0 Report No.: 048L022EI 1. GENERAL INFORMATION 1.1. EUT Description Product Name Trade Name Model No. Working Voltage Frequency Range Channel Number Data Speed Channel separation Type of Modulation Channel Control Antenna Type Antenna Gain Antenna Wireless 11g + Bluetooth Combo PCI Card MSI MS-6852, PC54GBT DC 5V (Power by PC) 2412-2472MHz 13 DSSS: 1, 2, 5.5, 11MHz OFDM: 6, 9, 12, 18, 24, 36, 48, 54MHz 5 MHz DSSS / OFDM Auto Connector (Reverse SMA) SmartAnt, 3dBi (Wireless) 1 Set Cable: 1.0m Working Frequency of Each Channel: Channel Frequency Channel Frequency Channel Frequency Channel Frequency Channel 01: 2412 MHz Channel 02: 2417 MHz Channel 03: 2422 MHz Channel 04: 2427 MHz Channel 05: 2432 MHz Channel 06: 2437 MHz Channel 07: 2442 MHz Channel 08: 2447 MHz Channel 09: 2452 MHz Channel 10: 2457 MHz Channel 11: 2462 MHz Channel 12: 2467 MHz Channel 13: 2472 MHz Note: 1. Regards to the frequency band operations; two rate that were included the lowest and highest frequency of channel were selected to perform the test, then show on this report. 2. This device is a composite device in accordance with ETSI regulations. The EMC was measured and made a test report that the report number is 048L022E. 3. QuieTek has verified all construction and function in typical operation. All the test modes were carried out with the EUT in normal operation, which was shown in this test report and defined as: Mode 1: Transmitter 11Mbps EMI Mode Mode 1: Transmitter 54Mbps Mode 2: Receiver 11Mbps Mode 2: Receiver 54Mbps Page: 5 of 35 Version:1.0 Report No.: 048L022EI 1.2. Tested System Details The types for all equipment, plus descriptions of all cables used in the tested system (including inserted cards) are: Product Manufacturer Model No. Serial No. FCC ID Power Cord (1) PC MSI N/A N/A N/A N/A (2) Monitor SAMSUNG 1200NF 800095K DoC Non-Shielded, 1.8m (3) Mouse HITACHI PC-KM1300 N/A JNZ201213 N/A (4) Keyboard COMPAQ KB-0133 B55940FBUOE04B DoC N/A Signal Cable Type Signal Cable Description A. VGA Cable Shielded, 1.8m, with two ferrite cores. B. Mouse Cable Shielded, 1.8m C. Keyboard Cable Shielded, 1.8m 1.3. Configuration of tested System EUT M onitor (2) A C PC(1) Antenna B Keyboard (4) 1.4. M ouse (3) EUT Exercise Software (1) Setup the EUT and simulators as shown on 1.3 (2) Turn on the power of all equipment. (3) PC reads data from disk. (4) Data will to coerce transmitting through EUT. (5) Repeat the above procedure (3) to (4) Page: 6 of 35 Version:1.0 Report No.: 048L022EI 1.5. Test Facility Ambient conditions in the laboratory: Items Test Item Required (IEC 68-1) Actual 15-35 20-35 30-60 50-55 Barometric pressure (mbar) 860-1060 950-1000 Temperature (°C) 15-35 20-35 10-75 50-65 860-1060 950-1000 15-35 20-35 860-1060 950-1000 Temperature (°C) IEC 61000-4-2 Humidity (%RH) IEC 61000-4-5 Humidity (%RH) Barometric pressure (mbar) Temperature (°C) Barometric pressure (mbar) Site Description: Site Name: Site Address: IEC 61000-4-4 IEC 61000-4-11 July 03, 2002 Accreditation on NVLAP NVLAP Lab Code: 200533-0 June 11, 2001 Accreditation on DNV Statement No. : 413-99-LAB11 April 18, 2001 Accreditation on Nemko Certificate No.: ELA 165 Certificate No.: ELA 162 Certificate No.: ELA 191 Quietek Corporation No. 5, Ruei-Shu Valley, Ruei-Ping Tsuen, Lin-Kou Shiang, Taipei, Taiwa, R.O.C. TEL : 886-2-8601-3788 / FAX : 886-2-8601-3789 E-Mail : [email protected] Page: 7 of 35 0914 ILAC MRA Version:1.0 Report No.: 048L022EI 2. Effective radiated Power 2.1. Test Equipment The following test equipments are used during the radiated emission tests: Equipment Last Cal. Spectrum Analyzer Advantest R3162C / 71720140 May, 2004 Temperature Chamber TDE CHM 150CT Mar., 2004 Note: 2.2. Manufacturer Model No./Serial No. Remark 1. All equipment upon which need to calibrated are with calibration period of 1 year. Test Setup Conduction Power Measurement Spectrum 12dBuV Temperature Chamber Power Supply 2.3. Test Condition Standard Temperature and Humidity, Standard Test Voltage 2.4. Limits The effective radiated power is defined as the total power of the transmitter. The effective radiated power shall be equal to or less than -10 dBW (100 mW) e.i.r.p. This limit shall apply for any combination of power level and intended antenna assembly. Page: 8 of 35 Version:1.0 Report No.: 048L022EI 2.5. Test Procedure The following method of measurement shall apply to both conducted and radiated measurements. The measurement shall be performed using normal operation of the equipment with modulation, using the test data sequence, applied. Using a suitable means, the output of the transmitter shall be coupled to a diode detector; the output of the diode detector shall be connected to the vertical channel of an oscilloscope; the combination of the diode detector and the oscilloscope shall be capable of faithfully reproducing the envelope peaks and the duty cycle of the transmitter output signal. The measurement shall be repeated at the lowest, the middle, and highest frequency of the stated frequency range. FHSS equipment shall be made to hop continuously to each of these three frequencies separately. 2.6. Uncertainty The measurement uncertainty is defined as ± 1.27dB 2.7. Test Specification According to ETSI EN 300 328:V1.4.1 (2003-04) 2.8. Test Result The emission from the EUT was below the specified limits. The worst-case emissions are shown in section 8. The acceptance criterion was met and the EUT passed the test. Page: 9 of 35 Version:1.0 Report No.: 048L022EI 3. Peak Power Density 3.1. Test Equipment The following test equipments are used during the radiated emission tests: Equipment Spectrum Analyzer Note: 3.2. Manufacturer Model No./Serial No. Advantest R3162C / 71720140 Remark Last Cal. May, 2004 1. All equipment upon which need to calibrated are with calibration period of 1 year. Test Setup RF Cable Spectrum EUT Analyzer SMA Connecter 3.3. Test Condition Standard Temperature and Humidity, Standard Test Voltage 3.4. Limits The maximum spectral power density is defined as the highest level of power in Watts per Hertz generated by the transmitter within the power envelope. For equipment using FHSS modulation, the maximum spectral power density shall be limited to -10 dBW (100 mW) per 100 kHz e.i.r.p. For equipment using other types of modulation, the maximum spectral power density shall be limited to-20 dBW(10 mW) per MHz e.i.r.p. Page: 10 of 35 Version:1.0 Report No.: 048L022EI 3.5. Test Procedure The maximum spectral power density shall be determined using a spectrum analyzer of adequate bandwidth for the type of modulation being used in combination with an RF power meter. Connect an RF power meter to the IF output of the spectrum analyzer and correct its reading using a known reference source, e.g. a signal generator. The above procedure shall be repeated for each of the three frequencies identified by the procedure given in limit (subclause 5.7.2.2.) Where the spectrum analyzer bandwidth is non-Gaussian, a suitable correction factor shall be determined and applied. Where a spectrum analyzer is equipped with a facility to measure power density, this facility may be used instead of the above procedure. 3.6. Uncertainty The measurement uncertainty is defined as ± 1.27 dB 3.7. Test Specification According to ETSI EN 300 328:V1.4.1 (2003-04) 3.8. Test Result The emission from the EUT was below the specified limits. The worst-case emissions are shown in section 8. The acceptance criterion was met and the EUT passed the test. Page: 11 of 35 Version:1.0 Report No.: 048L022EI 4. Frequency Range 4.1. Test Equipment Equipment Spectrum Analyzer Manufacturer Model No./Serial No. Advantest Temperature Chamber TDE Last Cal. R3162C / 71720140 May, 2004 CHM 150CT Mar., 2004 Remark Note: 1. All equipment upon which need to calibrated are with calibration period of 1 year. 4.2. Test Setup Conduction Power Measurement Spectrum 12dBuV Temperature Chamber Power Supply 4.3. Test Condition Standard Temperature and Humidity, Standard Test Voltage 4.4. Limits The frequency range of the equipment is determined by the lowest and highest frequencies occupied by the power envelope. fH is the highest frequency of the power envelope: it is the frequency furthest above the frequency of maximum power where the output power drops below the level of -80 dBm/Hz e.i.r.p. spectral power density (-30 dBm if measured in a100 kHz bandwidth). fL is the lowest frequency of the power envelope; it is the frequency furthest below the frequency of maximum power where the output power drops below the level equivalent to -80 dBm/Hz e.i.r.p. spectral power density (or -30 dBm if measured in a 100 kHz bandwidth). Page: 12 of 35 Version:1.0 Report No.: 048L022EI For a given operating frequency, the width of the power envelope is (fH - fL). In equipment that allows adjustment or selection of difference operation frequencies, the power envelope takes up difference positions in the allowed band. The frequency range is determined by the lowest value of fL and the highest value of fH resulting from the adjustment of the equipment to the lowest and highest operating frequencies. For all equipment the frequency range shall lie within the band 2.4GHz to 2.4835GHz (fL > 2.4GHz and fH < 2.4835GHz). 4.5. Test Procedure The measurement procedure shall be as follows: a) Place the spectrum analyzer in video averaging mode with a minimum of 50 sweeps selected and activate the transmitter with modulation applied. The RF emission of the equipment shall be displayed on the spectrum analyzer; b) Select lowest operating frequency of the equipment under test; c) Using the marker of the spectrum analyzer, find lowest frequency below the operating frequency at which spectral power density drops below the level given in limit (subclause 5.2.3); d) Select the highest operating frequency of the equipment under test; e) Find the highest frequency at which the spectral power density drops below the value given in limit (subclause 5.2.3.); f) The difference between the frequencies measured in steps c) and e) is the frequency range. 4.6. Uncertainty The measurement uncertainty is defined as ± 100 kHz 4.7. Test Specification According to ETSI EN 300 328:V1.4.1 (2003-04) 4.8. Test Result The emission from the EUT was below the specified limits. The worst-case emissions are shown in section 8. The acceptance criterion was met and the EUT passed the test. Page: 13 of 35 Version:1.0 Report No.: 048L022EI 5. Spurious Emission 5.1. Test Equipment The following test equipment are used during the radiated emission test: Test Site Equipment Site # 1 Site # 2 Site # 3 Note: 5.2. Manufacturer Model No./Serial No. Last Cal. Test Receiver R&S ESVS 10 / 834468/003 July, 2004 Spectrum Analyzer Advantest R3162/ 00803480 May, 2004 Pre-Amplifier Advantest BB525C/ 3307A01812 May, 2004 Bilog Antenna SCHAFFNER CBL6112B / 2697 Nov., 2003 Test Receiver R&S ESCS 30 / 836858 / 022 Nov., 2003 Spectrum Analyzer Advantest R3162 / 100803466 May, 2004 Pre-Amplifier Advantest BB525C/3307A01814 May, 2004 Bilog Antenna SCHAFFNER CBL6112B / 2705 Oct., 2003 Horn Antenna ETS 3115 / 0005-6160 July, 2004 Pre-Amplifier QTK QTK-AMP-01/ 0001 July, 2004 Test Receiver R&S ESI 26 / 838786 / 004 May, 2004 Spectrum Analyzer Advantest R3162 / 100803480 May, 2004 Pre-Amplifier QTK QTK-AMP-03 / 0003 May, 2004 Bilog Antenna SCHAFFNER CBL6112B / 2697 May, 2004 Horn Antenna ETS 3115 / 0005-6160 July, 2004 Pre-Amplifier QTK QTK-AMP-01 / 0001 July, 2004 1. All equipments that need to calibrate are with calibration perio d of 1 year. 2. Mark “X” test instruments are used to measure the final test results. Test Setup 3m FRP Dome 1m to 4m Load Non-Conducted Table Antenna Mast Bilog or Horn Antenna Antenna height can be moved from 1m to 4m, Antenna and turntable distance 3m EUT 1.5 m Fully Soldered Ground Plane Test Receiver TO Controller To Receiver Page: 14 of 35 Version:1.0 Report No.: 048L022EI 5.3. Test Condition Standard Temperature and Humidity, Standard Test Voltage 5.4. Limits Transmitter limits for narrowband spurious emission Frequency Range Limit when operating Limit when in standby 30MHzto 1 GHz -36 dBm -57 dBm Above 1 GHz to 12.75 GHz -30 dBm -47 dBm 1.8 GHz to 1.9 GHz -47 dBm -47 dBm 5.15 GHz to 5.3 GHz Transmitter limits for wideband spurious emission Frequency Range Limit when operating Limit when in standby 30MHzto 1 GHz -86 dBm/Hz -107 dBm/Hz Above 1 GHz to 12.75 GHz -80 dBm/Hz -97 dBm/Hz 1.8 GHz to 1.9 GHz -97 dBm/Hz -97 dBm/Hz 5.15 GHz to 5.3 GHz Narrowband spurious emission limit for receivers Frequency Range Limit 30MHzto 1 GHz -57 dBm Above 1 GHz to 12.75 GHz -47 dBm Wideband spurious emission limit for receivers Frequency Range Limit 30MHzto 1 GHz -107 dBm/Hz Above 1 GHz to 12.75 GHz -97 dBm/Hz Page: 15 of 35 Version:1.0 Report No.: 048L022EI 5.5. Test Procedure The EUT and its simulators are placed on a turn table which is 1.5 meters above ground. The turn table can rotate 360 degrees to determine the position of the maximum emission level. The EUT was positioned such that the distance from antenna to the EUT was 3 meters.The antenna can move up and down between 1 meter and 4 meters to find out the maximum emission level. Broadband antenna (calibrated bi-log and horn antenna) are used as a receiving antenna. Both horizontal and vertical polarization of the antenna are set on measurement. And a high frequency preamlifier were used increase the sensitivity of the measuring. In order to find the maximum emission, all of the interface cables must be manipulated according to ETSI EN 300 328:V1.4.1 (2003-04) on radiated measurement. The additional notch filter below 1GHz was used to measure the level of harmonics radiated emission during field dtrength of harmonics measurement. The bandwidth setting on the field strength meter (R & S Spectrum Analyzer FSP40 )is 100 kHz. The frequency range from 30MHz to 12.75GHz is checked. 5.6. Uncertainty The measurement uncertainty above 1G is defined as ± 3.9 dB under 1G is defined as ± 3.8 dB 5.7. Test Specification According to ETSI EN 300 328:V1.4.1 (2003-04) 5.8. Test Result The emission from the EUT was below the specified limits. The worst-case emissions are shown in section 8. The acceptance criterion was met and the EUT passed the test. Page: 16 of 35 Version:1.0 Report No.: 048L022EI 6. Measurement Uncertainty Values The maximum values of the absolute measurement uncertainties of the measurements defined in the present document shall not exceed the values given below: Parameter Uncertainty radio frequency ± 1 x10 –5 total RF power, conducted ± 1.5 dB RF power density, conducted ± 3 dB spurious emissions, conducted ± 3 dB all emissions, radiated ± 6 dB Temperature ± 1 oC Humidity ±5% DC and low frequency voltages ±3% Page: 17 of 35 Version:1.0 Report No.: 048L022EI 7. EMC Reduction Method During Compliance Testing No modification was made during testing. Page: 18 of 35 Version:1.0 Report No.: 048L022EI 8. Test Result The test results in the emission and the immunity were performed according to the requirements of measurement standard and process. Quietek Corporation is assumed full responsibility for the accuracy and completeness of these measurements. The test data of the emission is listed as below. All the tests were carried out with the EUT in normal operation, which was defined as: Mode 1: Transmitter 11Mbps EMI Mode Mode 1: Transmitter 54Mbps Mode 2: Receiver 11Mbps Mode 2: Receiver 54Mbps Page: 19 of 35 Version:1.0 Report No.: 048L022EI 8.1. Test Data of Effective Radiated Power Product Test Item Test Mode : : : Wireless 11g + Bluetooth Combo PCI Card Effective Radiated Power Mode 1: Transmitter 11Mbps Antenna Gain: 3 dBi, Cable Loss: 1 dB, Duty Cycle: 1 Test Conditions o Tnom (25) C Vnom (230) V o Tmax (35) C Vmax (253) V o Tmax (35) C Vmin (207) V Tmin (0) oC Tmin (0) oC Vmax (253) V Vmin (207) V Channel Freq. Reading Level Emission Level Limit (MHz) (dBm) (dBm) (dBm) 1 2412 11.57 15.57 20 7 2442 10.55 14.55 20 13 2472 10.82 14.82 20 1 2412 10.56 14.56 20 7 2442 9.95 13.95 20 13 2472 9.89 13.89 20 1 2412 10.63 14.63 20 7 2442 9.91 13.91 20 13 2472 9.93 13.93 20 1 2412 12.37 16.37 20 7 2442 11.96 15.96 20 13 2472 12.76 16.76 20 1 2412 12.33 16.33 20 7 2442 12.02 16.02 20 13 2472 12.71 16.71 20 * Emission Level = Reading Level + Antenna Gain + 10 log (1/Duty Cycle) Remark: Channel 1 Lowest frequency at the appropriate spurious emission level Channel 7 Middle frequency at the appropriate spurious emission level Channel 13 Highest frequency at the appropriate spurious emission level Page: 20 of 35 Version:1.0 Report No.: 048L022EI Product Test Item Test Mode : : : Wireless 11g + Bluetooth Combo PCI Card Effective Radiated Power Mode 1: Transmitter 54Mbps Antenna Gain: 3 dBi, Cable Loss: 1 dB, Duty Cycle: 1 Test Conditions o Tnom (25) C Vnom (230) V o Tmax (35) C Vmax (253) V o Tmax (35) C Vmin (207) V o Tmin (0) C Tmin (0) oC Vmax (253) V Vmin (207) V Channel Freq. Reading Level Emission Level Limit (MHz) (dBm) (dBm) (dBm) 1 2412 12.88 16.88 20 7 2442 14.22 18.22 20 13 2472 14.11 18.11 20 1 2412 13.10 17.10 20 7 2442 12.91 16.91 20 13 2472 13.29 17.29 20 1 2412 13.08 17.08 20 7 2442 12.96 16.96 20 13 2472 13.26 17.26 20 1 2412 14.01 18.01 20 7 2442 15.69 19.69 20 13 2472 15.51 19.51 20 1 2412 13.99 17.99 20 7 2442 14.99 18.99 20 13 2472 15.53 19.53 20 * Emission Level = Reading Level + Antenna Gain + 10 log (1/Duty Cycle) Remark: Channel 1 Lowest frequency at the appropriate spurious emission level Channel 7 Middle frequency at the appropriate spurious emission level Channel 13 Highest frequency at the appropriate spurious emission level Page: 21 of 35 Version:1.0 Report No.: 048L022EI 8.2. Test Data of Peak Power Density Product Test Item Test Mode Channel : : : Wireless 11g + Bluetooth Combo PCI Card Peak Power Density Mode 1: Transmitter 11Mbps Freq. Reading Level Measure Level Limit (MHz) (dBm) (dBm) (dBm/MHz) Transmit speed: 11 Mbps, Antenna Gain: 3dBi, Cable Loss: 0.5 dB 1 2412 5.13 8.63 10 7 2442 4.25 7.75 10 13 2472 4.62 8.12 10 * Measure Level = Reading Level + Antenna Gain + 10 log (1/Duty Cycle) Test Result PASS Remark: Channel 1 Lowest frequency at the appropriate spurious emission level Channel 7 Middle frequency at the appropriate spurious emission level Channel 13 Highest frequency at the appropriate spurious emission level Page: 22 of 35 Version:1.0 Report No.: 048L022EI Product Test Item Test Mode Channel : : : Wireless 11g + Bluetooth Combo PCI Card Peak Power Density Mode 1: Transmitter 54Mbps Freq. Reading Level Measure Level Limit (MHz) (dBm) (dBm) (dBm/MHz) Transmit speed: 54 Mbps, Antenna Gain: 3dBi, Cable Loss: 0.5 dB 1 2412 -0.28 3.22 10 7 2442 -0.37 3.13 10 13 2472 -0.31 3.19 10 * Measure Level = Reading Level + Antenna Gain + 10 log (1/Duty Cycle) Test Result PASS Remark: Channel 1 Lowest frequency at the appropriate spurious emission level Channel 7 Middle frequency at the appropriate spurious emission level Channel 13 Highest frequency at the appropriate spurious emission level Page: 23 of 35 Version:1.0 Report No.: 048L022EI 8.3. Test Data of Frequency Range Product Test Item Test Mode : : : Wireless 11g + Bluetooth Combo PCI Card Frequency Range Mode 1: Transmitter 11Mbps Test Conditions Frequency (MHz) Tnom (25) oC Vnom (230) V Tmax (35) oC Vmax (253) V Tmax (35) oC Vmin (207) V Tmin (0) oC Vmax (253) V Tmin (0) oC Vmin (207) V Test Result FL 2403.55 FH 2480.55 FL 2403.60 FH 2480.35 FL 2403.60 FH 2480.35 FL 2403.55 FH 2480.90 FL 2403.55 FH 2480.90 FL: 2403.55 MHz FH: 2480.90 MHz Remark: FL Lowest frequency at the appropriate spurious emission level FH Highest frequency at the appropriate spurious emission level Page: 24 of 35 Version:1.0 Report No.: 048L022EI Product Test Item Test Mode : : : Wireless 11g + Bluetooth Combo PCI Card Frequency Range Mode 1: Transmitter 54Mbps Test Conditions Frequency (MHz) Tnom (25) oC Vnom (230) V Tmax (35) oC Vmax (253) V Tmax (35) oC Vmin (207) V Tmin (0) oC Vmax (253) V Tmin (0) oC Vmin (207) V FL 2403.60 FH 2480.40 FL 2403.60 FH 2480.35 FL 2403.60 FH 2480.35 FL 2403.55 FH 2480.55 FL 2403.55 FH 2480.55 FL: 2403.60MHz Test Result FH: 2480.55MHz Remark: FL Lowest frequency at the appropriate spurious emission level FH Highest frequency at the appropriate spurious emission level Page: 25 of 35 Version:1.0 Report No.: 048L022EI 8.4. Test Data of Spurious Emission Product Test Item Test Site Test Mode Frequency (MHz) : : : : Wireless 11g + Bluetooth Combo PCI Card Spurious Emission No.3 OATS Mode 1: Transmitter 11Mbps (Channel 1) Measurement (dBm) Reading Correction Factor (dBm) (dB) Limit Margin (dBm) (dB) Peak Detector (Horizontal) 399.570 -61.85 -61.08 -0.77 -36.00 25.85 485.900 -65.93 -64.71 -1.22 -36.00 29.93 599.390 -62.61 -60.81 -1.80 -36.00 26.61 669.230 -62.36 -60.20 -2.16 -36.00 26.36 799.210 -65.32 -62.49 -2.83 -36.00 29.32 933.070 -66.16 -62.64 -3.52 -36.00 30.16 4824.000 -60.90 -69.37 8.47 -30.00 30.90 7236.000 -53.98 -60.05 6.07 -30.00 23.98 9648.000 -51.72 -56.72 5.00 -30.00 21.72 12060.000 -48.47 -53.27 4.80 -30.00 18.47 Peak Detector (Vertical) 97.900 -67.97 -68.75 0.78 -36.00 31.97 399.570 -69.48 -68.71 -0.77 -36.00 33.48 499.480 -70.49 -69.20 -1.29 -36.00 34.49 535.370 -70.65 -69.18 -1.47 -36.00 34.65 669.230 -64.95 -62.79 -2.16 -36.00 28.95 800.180 -71.95 -69.12 -2.83 -36.00 35.95 4824.000 -60.86 -69.33 8.47 -30.00 30.86 7236.000 -54.83 -60.90 6.07 -30.00 24.83 9648.000 -51.28 -56.28 5.00 -30.00 21.28 12060.000 -48.52 -53.32 4.80 -30.00 18.52 Note: 1. All Reading are peak value. 2. “ ”, means this data is the worst emission level. 3. Emission Level = Reading Level + Correction Factor Page: 26 of 35 Version:1.0 Report No.: 048L022EI Product Test Item Test Site Test Mode Frequency (MHz) : : : : Wireless 11g + Bluetooth Combo PCI Card Spurious Emission No.3 OATS Mode 1: Transmitter 11Mbps (Channel 13) Measurement (dBm) Reading Correction Factor (dBm) (dB) Limit Margin (dBm) (dB) Peak Detector (Horizontal) 400.100 -61.95 -61.17 -0.78 -36.00 25.95 485.950 -66.45 -65.20 -1.25 -36.00 30.45 599.530 -62.11 -60.21 -1.90 -36.00 26.11 669.740 -63.12 -60.90 -2.22 -36.00 27.12 800.130 -65.13 -62.28 -2.85 -36.00 29.13 935.110 -64.71 -61.16 -3.55 -36.00 28.71 4944.000 -59.99 -68.37 8.38 -30.00 29.99 7416.000 -55.51 -61.28 5.77 -30.00 25.51 9888.000 -50.88 -55.84 4.96 -30.00 20.88 12360.000 -48.86 -53.60 4.74 -30.00 18.86 Peak Detector (Vertical) 97.950 -67.85 -67.53 -0.32 -36.00 31.85 400.330 -69.34 -68.46 -0.88 -36.00 33.34 500.530 -70.08 -68.58 -1.50 -36.00 34.08 536.330 -70.25 -68.74 -1.51 -36.00 34.25 670.550 -64.69 -62.46 -2.23 -36.00 28.69 803.210 -71.90 -69.01 -2.89 -36.00 35.90 4944.000 -60.63 -69.01 8.38 -30.00 30.63 7416.000 -55.40 -61.17 5.77 -30.00 25.40 9888.000 -51.32 -56.28 4.96 -30.00 21.32 12360.000 -48.53 -53.27 4.74 -30.00 18.53 Note: 1. All Reading are peak value. 2. “ ”, means this data is the worst emission level. 3. Emission Level = Reading Level + Correction Factor Page: 27 of 35 Version:1.0 Report No.: 048L022EI Product Test Item Test Site Test Mode Frequency (MHz) : : : : Wireless 11g + Bluetooth Combo PCI Card Spurious Emission No.3 OATS Mode 1: Transmitter 54Mbps (Channel 1) Measurement (dBm) Reading Correction Factor (dBm) (dB) Limit Margin (dBm) (dB) Peak Detector (Horizontal) 400.515 -61.82 -60.95 -0.87 -36.00 25.82 486.134 -65.86 -64.60 -1.26 -36.00 29.86 599.848 -62.58 -60.73 -1.85 -36.00 26.58 670.173 -62.28 -60.06 -2.22 -36.00 26.28 800.098 -65.29 -62.42 -2.87 -36.00 29.29 934.037 -66.12 -62.52 -3.60 -36.00 30.12 4824.000 -60.61 -69.08 8.47 -30.00 30.61 7236.000 -54.40 -60.47 6.07 -30.00 24.40 9648.000 -51.03 -56.03 5.00 -30.00 21.03 12060.000 -47.73 -52.53 4.80 -30.00 17.73 Peak Detector (Vertical) 98.437 -67.93 -68.68 0.75 -36.00 31.93 399.644 -69.39 -68.57 -0.83 -36.00 33.39 500.447 -70.45 -69.14 -1.31 -36.00 34.45 535.828 -70.57 -69.03 -1.54 -36.00 34.57 670.102 -64.90 -62.65 -2.25 -36.00 28.90 800.554 -71.86 -68.95 -2.91 -36.00 35.86 4824.000 -59.74 -68.21 8.47 -30.00 29.74 7236.000 -54.80 -60.87 6.07 -30.00 24.80 9648.000 -51.44 -56.44 5.00 -30.00 21.44 12060.000 -48.47 -53.27 4.80 -30.00 18.47 Note: 1. All Reading are peak value. 2. “ ”, means this data is the worst emission level. 3. Emission Level = Reading Level + Correction Factor Page: 28 of 35 Version:1.0 Report No.: 048L022EI Product Test Item Test Site Test Mode Frequency (MHz) : : : : Wireless 11g + Bluetooth Combo PCI Card Spurious Emission No.3 OATS Mode 1: Transmitter 54Mbps (Channel 13) Measurement (dBm) Reading Correction Factor (dBm) (dB) Limit Margin (dBm) (dB) Peak Detector (Horizontal) 400.264 -61.78 -61.01 -0.77 -36.00 25.78 486.677 -65.89 -64.59 -1.30 -36.00 29.89 599.565 -62.54 -60.70 -1.84 -36.00 26.54 669.886 -62.35 -60.11 -2.24 -36.00 26.35 800.202 -65.25 -62.41 -2.84 -36.00 29.25 934.062 -66.13 -62.58 -3.55 -36.00 30.13 4944.000 -59.99 -68.38 8.39 -30.00 29.99 7416.000 -55.64 -61.41 5.77 -30.00 25.64 9888.000 -51.11 -56.07 4.96 -30.00 21.11 12360.000 -49.19 -53.93 4.74 -30.00 19.19 Peak Detector (Vertical) 98.247 -67.94 -68.71 0.77 -36.00 31.94 400.550 -69.47 -68.64 -0.84 -36.00 33.47 500.135 -70.46 -69.13 -1.33 -36.00 34.46 535.505 -70.61 -69.06 -1.55 -36.00 34.61 670.089 -64.95 -62.75 -2.20 -36.00 28.95 800.686 -71.88 -69.04 -2.83 -36.00 35.88 4944.000 -60.54 -68.93 8.39 -30.00 30.54 7416.000 -56.06 -61.83 5.77 -30.00 26.06 9888.000 -50.44 -55.40 4.96 -30.00 20.44 12360.000 -47.80 -52.54 4.74 -30.00 17.80 Note: 1. All Reading are peak value. 2. “ ”, means this data is the worst emission level. 3. Emission Level = Reading Level + Correction Factor Page: 29 of 35 Version:1.0 Report No.: 048L022EI Product Test Item Test Site Test Mode Frequency (MHz) : : : : Wireless 11g + Bluetooth Combo PCI Card Spurious Emission No.3 OATS Mode 2: Receiver 11Mbps (Channel 1) Measurement (dBm) Reading Correction Factor (dBm) (dB) Limit Margin (dBm) (dB) Peak Detector (Horizontal) 400.354 -61.83 -60.96 -0.87 -57.00 4.83 486.238 -65.92 -64.66 -1.26 -57.00 8.92 599.431 -62.60 -60.75 -1.85 -57.00 5.60 670.186 -62.27 -60.03 -2.24 -57.00 5.27 800.037 -65.26 -62.33 -2.92 -57.00 8.26 933.134 -66.11 -62.58 -3.53 -57.00 9.11 2038.000 -66.14 -73.90 7.76 -47.00 19.14 4076.000 -57.97 -66.76 8.79 -47.00 10.97 6114.000 -57.93 -65.95 8.02 -47.00 10.93 8152.000 -54.09 -59.24 5.15 -47.00 7.09 10190.000 -52.89 -57.67 4.78 -47.00 5.89 12228.000 -51.70 -56.71 5.01 -47.00 4.70 Peak Detector (Vertical) 98.296 -67.95 -68.73 0.78 -57.00 10.95 400.277 -69.47 -68.63 -0.84 -57.00 12.47 500.139 -70.45 -69.13 -1.32 -57.00 13.45 535.759 -70.63 -69.06 -1.57 -57.00 13.63 669.752 -64.87 -62.68 -2.19 -57.00 7.87 801.009 -71.92 -69.09 -2.83 -57.00 14.92 2038.000 -66.16 -73.92 7.76 -47.00 19.16 4076.000 -53.24 -62.03 8.79 -47.00 6.24 6114.000 -58.55 -66.57 8.02 -47.00 11.55 8152.000 -53.40 -58.55 5.15 -47.00 6.40 10190.000 -53.00 -57.78 4.78 -47.00 6.00 12228.000 -51.70 -56.71 5.01 -47.00 4.70 Note: 1. All Reading are peak value. 2. “ ”, means this data is the worst emission level. 3. Emission Level = Reading Level + Correction Factor Page: 30 of 35 Version:1.0 Report No.: 048L022EI Product Test Item Test Site Test Mode Frequency (MHz) : : : : Wireless 11g + Bluetooth Combo PCI Card Spurious Emission No.3 OATS Mode 2: Receiver 11Mbps (Channel 13) Measurement (dBm) Reading Correction Factor (dBm) (dB) Limit Margin (dBm) (dB) Peak Detector (Horizontal) 399.878 -61.81 -61.01 -0.80 -57.00 4.81 486.854 -65.88 -64.59 -1.28 -57.00 8.88 599.554 -62.57 -60.77 -1.80 -57.00 5.57 669.617 -62.30 -60.04 -2.25 -57.00 5.30 800.004 -65.23 -62.38 -2.85 -57.00 8.23 933.869 -66.11 -62.57 -3.54 -57.00 9.11 2098.000 -66.45 -74.17 7.72 -47.00 19.45 4196.000 -59.72 -68.44 8.72 -47.00 12.72 6294.000 -58.26 -65.87 7.61 -47.00 11.26 8392.000 -53.29 -58.50 5.21 -47.00 6.29 10490.000 -53.09 -57.70 4.61 -47.00 6.09 12588.000 -51.47 -56.44 4.97 -47.00 4.47 Peak Detector (Vertical) 98.794 -67.89 -68.67 0.78 -57.00 10.89 400.037 -69.40 -68.54 -0.86 -57.00 12.40 500.211 -70.46 -69.07 -1.38 -57.00 13.46 535.803 -70.64 -69.11 -1.53 -57.00 13.64 669.323 -64.87 -62.68 -2.19 -57.00 7.87 800.907 -71.90 -69.04 -2.85 -57.00 14.90 2098.000 -65.86 -73.58 7.72 -47.00 18.86 4196.000 -55.83 -64.55 8.72 -47.00 8.83 6294.000 -58.02 -65.63 7.61 -47.00 11.02 8392.000 -53.72 -58.93 5.21 -47.00 6.72 10490.000 -52.76 -57.37 4.61 -47.00 5.76 12588.000 -51.98 -56.95 4.97 -47.00 4.98 Note: 1. All Reading are peak value. 2. “ ”, means this data is the worst emission level. 3. Emission Level = Reading Level + Correction Factor Page: 31 of 35 Version:1.0 Report No.: 048L022EI Product Test Item Test Site Test Mode Frequency (MHz) : : : : Wireless 11g + Bluetooth Combo PCI Card Spurious Emission No.3 OATS Mode 2: Receiver 54Mbps (Channel 1) Measurement (dBm) Reading Correction Factor (dBm) (dB) Limit Margin (dBm) (dB) Peak Detector (Horizontal) 400.243 -61.81 -61.00 -0.81 -57.00 4.81 486.370 -65.89 -64.64 -1.26 -57.00 8.89 599.584 -62.52 -60.63 -1.89 -57.00 5.52 670.142 -62.32 -60.11 -2.21 -57.00 5.32 799.218 -65.29 -62.44 -2.85 -57.00 8.29 933.937 -66.11 -62.52 -3.59 -57.00 9.11 2038.000 -66.19 -73.95 7.76 -47.00 19.19 4076.000 -59.62 -68.41 8.79 -47.00 12.62 6114.000 -58.96 -66.98 8.02 -47.00 11.96 8152.000 -53.70 -58.85 5.15 -47.00 6.70 10190.000 -53.03 -57.81 4.78 -47.00 6.03 12228.000 -52.05 -57.06 5.01 -47.00 5.05 Peak Detector (Vertical) 98.203 -67.88 -68.63 0.75 -57.00 10.88 399.642 -69.40 -68.56 -0.84 -57.00 12.40 500.455 -70.48 -69.10 -1.39 -57.00 13.48 535.460 -70.63 -69.09 -1.54 -57.00 13.63 669.817 -64.91 -62.68 -2.23 -57.00 7.91 800.262 -71.93 -69.05 -2.88 -57.00 14.93 2038.000 -67.09 -74.85 7.76 -47.00 20.09 4076.000 -54.08 -62.87 8.79 -47.00 7.08 6114.000 -58.58 -66.60 8.02 -47.00 11.58 8152.000 -54.40 -59.55 5.15 -47.00 7.40 10190.000 -52.84 -57.62 4.78 -47.00 5.84 12228.000 -51.48 -56.49 5.01 -47.00 4.48 Note: 1. All Reading are peak value. 2. “ ”, means this data is the worst emission level. 3. Emission Level = Reading Level + Correction Factor Page: 32 of 35 Version:1.0 Report No. 048L022EI Product Test Item Test Site Test Mode Frequency (MHz) : : : : Wireless 11g + Bluetooth Combo PCI Card Spurious Emission No.3 OATS Mode 2: Receiver 54Mbps (Channel 13) Measurement (dBm) Reading Correction Factor (dBm) (dB) Limit Margin (dBm) (dB) Peak Detector (Horizontal) 400.318 -61.76 -60.90 -0.86 -57.00 4.76 486.148 -65.78 -64.50 -1.28 -57.00 8.78 599.600 -62.55 -60.69 -1.86 -57.00 5.55 669.984 -62.24 -60.07 -2.17 -57.00 5.24 800.131 -65.28 -62.40 -2.88 -57.00 8.28 933.408 -66.04 -62.51 -3.53 -57.00 9.04 2098.000 -66.06 -73.78 7.72 -47.00 19.06 4196.000 -60.50 -69.22 8.72 -47.00 13.50 6294.000 -57.13 -64.74 7.61 -47.00 10.13 8392.000 -52.71 -57.92 5.21 -47.00 5.71 10490.000 -52.83 -57.44 4.61 -47.00 5.83 12588.000 -51.86 -56.83 4.97 -47.00 4.86 Peak Detector (Vertical) 98.058 -67.97 -68.68 0.72 -57.00 10.97 400.384 -69.43 -68.65 -0.78 -57.00 12.43 499.800 -70.40 -69.07 -1.34 -57.00 13.40 536.203 -70.61 -69.12 -1.49 -57.00 13.61 670.035 -64.91 -62.67 -2.24 -57.00 7.91 800.689 -71.88 -69.01 -2.87 -57.00 14.88 2098.000 -49.55 -57.27 7.72 -47.00 2.55 4196.000 -51.12 -59.84 8.72 -47.00 4.12 6294.000 -52.57 -60.18 7.61 -47.00 5.57 8392.000 -53.17 -58.38 5.21 -47.00 6.17 10490.000 -53.30 -57.91 4.61 -47.00 6.30 12588.000 -51.47 -56.44 4.97 -47.00 4.47 Note: 1. All Reading are peak value. 2. “ ”, means this data is the worst emission level. 3. Emission Level = Reading Level + Correction Factor Page:33 of 35 Version:1.0 Report No. 048L022EI Attachment 1: EUT Test Photographs Page:34 of 35 Version:1.0 Report No.: 048L022EI Attachment 1: EUT Test Setup Photographs Front View of Radiated Test Back View of Radiated Test Page : 1 of 2 Version:1.0 Report No.: 048L022EI Front View of Radiated Test (Horn) Back View of Radiated Test (Horn) Page : 2 of 2 Version:1.0 Report No. 048L022EI Attachment 2: EUT Detailed Photographs Page:35 of 35 Version:1.0 Report No.: 048L022EI Attachment 2 : EUT Detailed Photographs (1) EUT Photo (2) EUT Photo Page : 1 of 7 Version:1.0 Report No.: 048L022EI (3) EUT Photo (4) EUT Photo Page : 2 of 7 Version:1.0 Report No.: 048L022EI (5) EUT Photo (6) EUT Photo Page : 3 of 7 Version:1.0 Report No.: 048L022EI (7) EUT Photo (8) EUT Photo Page : 4 of 7 Version:1.0 Report No.: 048L022EI (9) EUT Photo (10) EUT Photo Page : 5 of 7 Version:1.0 Report No.: 048L022EI (11) EUT Photo (12) EUT Photo Page : 6 of 7 Version:1.0 Report No.: 048L022EI (13) EUT Photo (14) EUT Photo Page : 7 of 7 Version:1.0
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- Wired & Wireless
- PCI 1.1 WLAN / Bluetooth
- 54 Mbit/s
- Wi-Fi Single-band (2.4 GHz) 1.2