INTELLIDRY
DRYER MD-1 6
MD8600
Pages 1-2
-&ff
0 TY...............................................
Save complete model and serial number
identificationfor your dryer.This is located
on a data plate on the lower center of the
door opening. Record these numbers
below for easy access.
Lj&YfR fXtlAUIT
TIPS
..........................
Page 3
TIPS
Page 4
........................................
@!ilPiRATING
Model Number
Pages 5-6
TROLL
...............................................
Page 7
-+@YING WM DRYfl ....................................
Serial Number
Page 8
f & CLf
ANING..
.....................................
4’
4
Date of Purchase
For additional questions,please contact us:
MaytagAppliancesSales Company
l-800-688-9900 USA
l-800-688-2002CANADA
l-800-688-2080 USATTY (for deaf,
hearing impairedor speech impaired)
Mon.-Fri., 8am-8pm EasternTime
Internet:http://www.maytag.com
NOTE:In our continuing effort to improve
the quality of our appliances, it may be
necessary to make changes to the appliance without revising this guide.
IMPORTANT: Keep this guide and the
sales receipt in a safe place for future
reference. Proof of original purchase
date is needed for warranty service.
G!
-ilk
Page 8
LIGiiT
PLACING
DRUM
...........................
................................
Page 8
fRSlNG
TtifDOOR
4
aMA
Page 9
TlPS..
LAUNDRY
..........................
Page 9
JJIYiR RAM............................................
;“.;.)
...
2
Page IO
.......................................
YOU
CA11
&FOR{
JJARRANTY
..............................................
Page 11
Page I 2
-JJlIDEDfl'UTIlISATQJR
.........................
sib
...................................
Page 24
Dfl UIUARIO
IMPORTANT:For service and warranty information, see page 11.
A/O8100
Part No. 6 3715360
http:i/www.maytag.com
MCS No. 33002582
JN
Litho U.S.A
IMPORTANT
SAfETYINSTRlKTIONS
WARNING-To reduce the risk of fire, electric shock or injury to persons
For your safety, the information in this
manual must be followed to minimize
the risk of fire or explosion or to prevent property damage, personal injury
or death.
-Do not store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or any other appliance.
-WHAT TO DO IF YOU SMELL GAS
l
Do not try to light any appliance.
l
Do not touch any electrical switch.
* Do not use any phone in your
building.
l
l
l
Clear the room, building or area of
all occupants.
Immediately call your gas supplier
from a neighbor’s phone. Follow
the gas supplier’s instructions.
If you cannot reach your gas supplier, call the fire department.
Installation and service must be performed by a qualified installer, service
agency or the gas supplier.
when using your appliance, follow basic precautions, including the following:
1. Readall instructionsbeforeusing the
appliance.
2. To avoid the possibility of fire or
explosion:
a. Do not dry items that have been
previouslycleaned in, washed in,
soaked in, or spotted with gasoline, dry-cleaning solvents, other
flammable or explosive substances as they give off vapors
that could ignite or explode. Any
material on which you have used
a cleaningsolvent,or which is saturated with flammable liquids or
solids, should not be placed in the
dryer, until all traces of these
flammable liquids or solids and
their fumes have been removed.
There are many highly flammable
items used in homes, such as:
acetone,denaturedalcohol,gasoline, kerosene,some liquid household cleaners, some spot
removers,turpentine, waxes and
wax removers.
b. Items containing foam rubber
(may be labeled latex foam) or
similarly textured rubber-like
materials must not be dried on a
heat setting. Foam rubber materials when heated, can under certain circumstancesproducefire by
spontaneouscombustion.
3. Do not allow children to play on or in
the appliance. Close supervision of
children is necessarywhen the appliance is used near children.
4. Beforethe applianceis removedfrom
service or discarded, remove the
door to the drying compartment.
5. Do not reach into the applianceif the
drum is moving.
6. Do not install or store this appliance
where it will be exposed to the
weather,
7. Do not tamperwith controls
8. Do not repair or replace any part of
the appliance or attempt any servicing unless specifically recommended
in published user-repair instructions
that you understand and have the
skills to carry out.
9. Do not use fabric softeners or products to eliminatestatic unless recommended for dryer use by the manufacturerof the fabric softeneror product.
10. Clean the lint screen before or after
each load.
11. Keep the area around the exhaust
opening and surrounding areas free
from lint accumulation.dust and dirt.
12. The interior of the dryer and exhaust
duct should be cleaned periodically
by qualified service personnel.
13. This appliance must be properly
grounded. Never plug the appliance
cord into a receptacle which is not
grounded adequately and in accordance with local and national codes,
See installation instructions for
groundingthis appliance.
14. Do not sit on top of the clothes dryer.
SAVETHESE INSTRUCTIONSFOR FUTUREREFERENCE
$AfETY
NOTICE
& WARNING
Do not place into your dryer items that have been spotted or soaked with vegetable
oil or cooking oil. Even after being washed, these items may contain significant
amounts of these oils. The remaining oil can ignite spontaneously. The potential
for spontaneous ignition increases when the items containing vegetable oil or
cooking oil are exposed to heat. Heat sources, such as your clothes dryer, can
warm these items, allowing an oxidation reaction in the oil to occur. Oxidation creates heat. If this heat cannot escape, the items can become hot enough to catch
fire. Piling, stacking or storing these kinds of items may prevent heat from escaping and can create a fire hazard.
All washed and unwashed fabrics that contain vegetable oil or cooking oil can be
dangerous. Washing these items in hot water with extra detergent will reduce, but
will not eliminate, the hazard. Always use the “cool down” cycle for these items to
reduce the items’ temperature. Never remove these items from the clothes dryer
hot or interrupt the drying cycle until the items have run through the “cool down”
cycle. Never pile or stack these items when they are hot.
The California Safe Drinking Water and
Toxic EnforcementAct of 1986 (Proposition
65) requires the Governor of California to
publish a list of substances known to the
State of Californiato cause cancer or reproductive harm, and requires businesses to
warn customers of potential exposures to
such substances.
Users of this appliance are hereby warned
that the burning of gas can result in Iowlevel exposure to some of the listed substances, including benzene, formaldehyde
and soot, due primarily to the incomplete
combustionof natural gas or liquid petroleum (LP)fuels. Exhaustducts should be kept
free of obstructionsand properlyexhausted
dryers will minimizeexposure.
DRYEREXtlAUSTTlPS
WARNlNG
-
Plastic or nonmetal flexible duct presents a potential fire hazard.
DO
Readthe installation
instructions and the
user’s guide.
Do
Let your dryer
exhaust the air easily.
Use 4 inch diameter
rigid metal duct.Tape all joints,
including at the dryer. Neveruse
lint-trappingscrews.
Do
Do
Keepduct runs
as straight as
possible.
Clean all old ducts
before installing your
new dryer. Be sure vent
flap opens and closes freely.
Inspectand clean the exhaust
systemannually.
I
DON
T
Let a poor
exhaust system
cause slow drying.
I
DON
T
Restrictyour dryer with a poor exhaust
system.
3
Use longer than necessaryduct runs
with many elbows.
I
DON
T
I
DON
T
Use plastic, thin foil, or
non-metalflexible duct.
Allow crushed or clogged ducts
and vent.
OPERATING
TIPS
NCXE:
(IfANTtlELINT
fllTER
* After each load.
To shorten drying time.
l
Do not operate the
dryer without the lint
filter in place.
* To operate more efficiently.
ADD
AfABRIc
SoTENER
LOAD
THE
DRYER
PROPERLY
l
l
l
l
SHEET
(If DESIRED
f
By placing only one wash load in the
dryer at a time.
Avoid very small loads or mixing
heavyweightand lightweightclothes.
The bottom light in the monitor will remain
on until the cool down portion of the cycle
starts. During cool down the dryer continues to tumble the load in unheated air to
help minimizewrinkling.
l
To control static cling.
l
When drying large, bulky items such
as a blanket or comforter, it may be
necessaryto repositionthe load during
the cycle to ensure even drying.
Indicator lights in the moisture monitor will
display when an IntelliDrycycle is in operation The top light will blink on and off. As
loads dry, there will be longer pauses
between each blink. No lights will display
during Time Dry or Air Fluff.
After loading the dryer.
l
When only one or two articles need
drying, add a few similar items to
improvetumblingand drying efficiency.
CHECK
THE
MOISTURE
M0t41~0~
l
MOISTURE
MONITOR
MORE
LESS
NOTE: The top monitor light
may not blink when small loads
of heavy,bulky items are dried,
such as rugs or sweaters.
Before the load becomes warm. This
helps prevent greasy-lookingsoftener
stains.
And removeany used softener sheets
from the dryer to prevent greasy-looking softenerstains.
(ONTROlSATAGlAN(f
INTELLIDRY WRINKLE FREE FABRICS
WITH PRESS CARE automaticallysenses the moisture in the load and shuts off when the selected dryness
level is reached. It minimizes wrinkles of synthetic fabrics
such as acrylic, nylon, polyester or blends by providing an
unheatedcool-downperiod at the end of the cycle. Simply
set the control to the desired dryness level (MORE DRY LESS DRY).The line between MORE DRY and LESS DRY
is the initial preferredsetting for the majorityof loads.
INTELLIDRY REGULAR automatically senses the
moisturein the load and shuts off when the selecteddryness
level is reached.This cycle is designedfor loads such as towels, underwear, t-shirts, jeans, etc. Set the control to the
desired dryness level (MORE DRY - LESS DRY).The line
between MORE DRY and LESS DRY is the initial preferred
setting for the majorityof loads,
Il\iTELLIDRY
ULAR
COOL
DOWN
LESS
DRY
MORE
INTELLIDRY
D
TIME DRY/
AIR FLUFF
WRINKLE
FREE
FABRICS
WITH
PRESS
CARE
WRINKLE
RELEASE
DdMP DRY
WRINKLE RELEASE will release
wrinkles from items that are clean and dry
but slightly wrinkled, such as from a crowded closet, packedsuitcaseor from sitting in
the dryertoo long afterthe end of the cycle.
It provides IO minutes of heated tumbling
and 5 minutesof cool down tumbling without heat.
DAMP DRY is designed to “partially”
DRYELFABRICCAREis designed
for use on dry clean only fabricsin combination with Dryel Dry Clean Only Fabric
Care product. Placing the control dial
arrow at the DRYELline will provide the
optimalamountof time neededto properly use Dryel. (For more information on
using the Dryel cycle, see page 7.)
TIME DRY/AIR FLUFF may be
selectedfor any load if the IntelliDry sensor
systemis not desired.Set the controlto the
desired numberof minutes.
dry items. It provides approximately 20
minutesof heated tumbling and 5 minutes
of cool down tumblingwithout heat.
NOTE:The dial can be turned in either directionto select a cycle. Once started, the dial will not advanceat a specific rate during the IntelliDry cycles.At first the dial may not advanceat all. Towardthe end of the cycle (when the
load begins to dry) the dial will advanceat a more regular rate and much more quickly.This is normal operation.
w
$ElE(T
TEMPERATURE
TEMPERATURE
REGULAR - for sturdy cottons or those
labeled“TumbleDry”.
MEDIUM - for permanent press, synthetics,
lightweight cottons or items labeled “Tumble
Dry Medium”.
REGULAR
DELICATE- for heat sensitive items labeled
“TumbleDry Low”or “TumbleDry Warm”.
DELlCATi
AIR FLUFF
MEDIUM
.
.
.
AIR FLUFF - tumbles without heat. Used for
sensitive loads or items needingfreshening.
EXTRA LOWTEMP ON* - overrides the
Regular,Mediumor Delicatetemperatureselections, providingthe lowestheated dry temperature possible. EXTRALOWTEMP temperature
is lower than DELICATE.(EXTRALOWTEMP
will not overridethe AIR FLUFFsetting).
EXTRALOWTEMP OFF - allows for full temperaturerangeof Regularthrough Delicate.
OPTIONS
ON
EXTRA
LOW TEMP
OFF
EXTRA
LOW TEMP
ON
PRESSCARE ON - providesapproximately20
minutes of tumbling in unheated air after the
Wrinkle Free Fabricscycle to further minimize
wrinkling.
PRESS CARE
OFF
PRESS CARE OFF - cancels the additional
tumblingin unheatedair.
m
fNDOftvtu SIGNAL m
Shortly before the cycle is
complete, an audible signal
will sound. If the Press Care
option has been selected,
the audible signal will sound
intermittentlyduring the cool
down portion of Press Care.
The signal can be turned off if desired.
*The EXTRALOWTEMP light will illuminate when the EXTRALOWTEMP
ON option is selected with Regular,
Mediumor Delicatetemperatures.
PM START
Pushthis buttonto start the dryer.The dryer
door must be shut for the dryer to operate.
If the door is opened during the cycle, the
start button must be pushed again to
resumethe cycle once the door is closed.
START
USING
YOUR
DRYER
WIT1
DRYEl
Setting
the Controls
for Dryel Fabric Care:
TEMPERATURE
B
mal
Set the temperaturefor Regularheat.
DO NOT select Air Fluff or the Extra
Low TempOn option.
i
REGULAR
.
.
MEDIUM
.
DELICAT;
AIR FLUFF
dial at the Dryel line.
INTELLIDRY
OFF
-
MORE DRY
REGULAR
LESS DRY
)FF
INTELLIDRY
WRINKLE
FREE
FABRICS
WITH
ml
D
PRESS
CARE
Press Start Button
For Best Performance:
l
l
l
Referto the Dryel instructionsfor proper use.
Items in the bag must tumble.Place no more than 3
to 4 items in the bag at one time.
Do not mix colors or fabrics when using Dryel.
. Immediately at the end of the cycle, remove
garments from the Dryel bag. Hang the garments
while still warm and slightly damp to minimize
wrinkles.
-
WRINKLE
\
RELEASE
20
\
YnrLL
DAMP DRY
TIME DRY/
AIR FLUFF
i
CARE
ANDClEANING
Control Panel - clean with a soft, damp
cloth. Do not use abrasivesubstances.
Tumbler - remove any stains such as
crayon, ink pen or fabric dye (from new
items such as towels or jeans) with an
all-purpose cleaner. Then tumble old
towels or rags to remove any excess
Instructionsfor replacingthe bulb:
1) Unplug or disconnectthe dryer from
the electrical powersupply.
2) Open the door and use a Phillips
screwdriver to remove the screw
attaching the lens to the tumbler
front.
Dryer Exhaust System - should be
inspected and cleaned once a year to
maintainoptimumperformance.The outside exhaust hood should be cleaned
more frequentlyto ensure proper operation. (Referto the InstallationInstructions
for more information,)
stain or cleaning substance.Once these
steps are done,stains may still be visible,
but should not transfer to subsequent
loads.
Cabinet - wipe off any marks with soap
and water.
7) Replacelens cover by hookingplastic
tabs into tumbler front below the light
housing.
4) Rotate bulb counter-clockwise to
removefrom socket.
5) Replacethe bulb with a 120 volt, 10
watt maximumcandelabrabase light
bulb.
8) Reinstallthe screwinto the lens cover
screw hole.
3) Reconnectdryer to power supply.
6) Turn the light bulb clockwise into
socket.
3) Removelens cover by pulling cover
toward center of tumbler.
REVERSINGTliEDOOR
Directionsfor reversingthe dryer door:
1) Remove the hinge hole covers and
screws.
2) While supportingthe door, remove2
screws in the hinges that secure the
hinges to the cabinet.
3) Removedoor by lifting slightly at the
hinges and pulling the hinge tabs out
of the hinge slots.
4) Movethe followingparts to the opposite side of the door: 2 hinges and 4
hinge screws, 4 door screws, door
strike and screw, inner door cover
plate and screw.
Screw the lower hinge screw in first.
This will help to align the door and
hinges.
6) Replacethe hinge hole covers to the
oppositeside.
5) Attach the door to the opposite side
of the cabinet using the 2 counter
sunk hinge screws. (See below).
l-
Counter
Door Catch
7
Sunk Screw
\
Door
Screws
/
Door
Strike
Door
z Screws
8
SPEOAHAUNDRY
TIPS
Pleasefollowthe care label or manufacturersinstructionsfor drying special items.If care label instructionsare not available,
use the following informationas a guide.
Avoid Dryer Drying...
l
l
FiberglassItems(curtains,draperies,etc.)
Woolens,unlessrecommended
on the label.
l
Bedspreads
81Comforters
l
l
Blankets
Curtains
81Draperies
Cloth Diapers
Down-filled items
(jackets,sleeping bags,
comforters,etc.)
Foam Rubber
(rug backs,stuffedtoys,
certain shoulder pads, etc.)
Plastics
(showercurtains, outdoor
furniture covers,etc.)
Vegetableor cookingoil soakeditems,(Seepg.2)
Followthe care label instructionsor dry on the Regularcycle.
Be sure the item is thoroughly dry before using or storing.
May require repositioningto ensure even drying.
Dry only one blanketat a time for best tumblingaction.
* Be sure the item is thoroughlydry beforeusing or storing.
l
l
l
Use the Wrinkle Free Fabricscycle to help minimizewrinkling.
Dry these in small loads for best results and removeas soon as possible.
* Use the Regularcycle for soft, fluffy diapers.
l
l
Use the Regularcycle and a delicatetemperaturesetting.
Place a clean pair of sneakers in the dryer with the item to fluff the down comforters,
etc. Adding a couple of dry towels shortens dry time and absorbsmoisture.
* DO NOT dry on a heat setting. Use the Time Dry/Air Fluff (no-heat)cycle.
a WARNING - Drying a rubber item with heat may damageit or pose a fire hazard.
l
Pillows
l
Use the Regularcycle.
Add a couple of dry towels and a pair of clean sneakersto help the tumblingaction and
to fluff the item.
* DO NOTdryer-dry kapok or foam pillows.
l
l
Use the Time Dry/Air Fluff cycle on a Delicateor Air Flufftemperaturedependingon the
care label instructions.
DRYERRACK
The drying rack allows you to dry items that To Use Rack:
you don’t want to tumble dry; for example, , Open dryer door.
sneakers,washablesweaters,stuffedtoys or 2’ Position drying rack in tumbler with the
pillows,etc.
two extension wires toward you. These
wires will brace the rack against the
The rack remains stationary, but the drum
front
surface of the tumbler. Legs will
rotates. (Make sure nothing hangs over the
rest
on
front ledge and at back of drum.
edgesof the rack.)
Place wet items on the rack, leaving
space betweenthem so air can reachall
surfaces.
Close dryer door.
9
5. Use the Time Dry cycle. Select time
according to moisture and weight of
item. Push the Start button. It may be
necessaryto reset the timer if a longer
drying time is needed.
To Remove Rack:
1. Open dryer door.
2. Lift rack straight up and out.
*Warning:Whendrying foam rubber,plastic, or rubber with heat,it is possiblethey
will suffer damageand could leadto a fire
hazard.
j BEfOREYOU
(1111
I
CHECKTHESE POINTSIF YOURCLOTHESDRYER...
DOESN’TRUN
. Be sure the door is latchedshut.
l
Be sure the power cord is plugged
into a live electrical outlet.
l
Checkthe home’scircuit breakerand
fuses.
l
Press the Start button again if the
door is opened during the cycle.
DOESN’THEAT
l
Checkthe home’scircuit breakerand
fuses.
l
Select a heat setting, not Air-Fluff.
l
On a gas dryer, check that the gas
supply is on.
l
Clean the lint filter and exhaust duct.
l
Dryer timer may have movedinto the
cool-downportion of the cycle.
DOESN’TDRY
l
Check all of the above, plus...
l
Be sure the exhaust hood at the outside of the home can open and close
freely.
l
Check exhaust system for lint buildup. Ducting should be inspectedand
cleaned annually.
l
Use 4” rigid metal exhaust duct.
l
Do not overload. 1 Wash load = 1
Dryer load.
l
Sort heavy items from lightweight
items.
l
Large, bulky items like blankets or
comfortersmay require repositioning
to ensure even drying.
l
l
Check that the washer is draining
properly to extract adequate water
from the load.
Clothes load is too small to tumble
properly.Add a few towels.
IS NOISY
Check the load for objects such as
coins, loose buttons, nails, etc.
Removepromptly.
l
It is normal to hear the dryer gas
valve or heating element cycle on
and off during the drying cycle.
l
Be sure the dryer is leveled properly
as outlined in the installationmanual.
l
Be sure the rubber feet are installed
on the leveling legs.
l
A clicking noise may be the timer
advancing.
l
It is normal for the dryer to hum due
to the high velocity of air moving
through the dryer drum and exhaust
system.
l
CONTROLKNOB ADVANCES
SLOWLY
l
This is normal operation for an
IntelliDry cycle, especially at the
beginningof the cycle.Oncethe load
begins to dry, the control knob will
start to advance. The rate of
advancement will be slow at the
beginningof the cycle becausethere
is more moisture in the load. As the
load becomes more dry, the control
knob will advancemore quickly.
DRIESUNEVENLY
@ Seams, pockets and other similar
heavy areas may not be completely
dry when the rest of the load has
reached the selected dryness level.
This is normal. Select the “More Dry”
setting if desired.
l
If one heavy item is dried with a lightweight load, such as one towel with
sheets, it is possible that the heavy
item will not be completely dry when
the rest of the load has reached the
selected dryness level. Sort heavy
items from lightweight items for best
drying results.
HAS AN ODOR
* Householdodors such as from painting, varnishing, strong cleaners, etc.
may enter the dryer with the surrounding room air. This is normal as the
dryer draws the air from the room,
heats it, pulls it through the tumbler
and exhausts it to the outside. When
these odors are presentin the air, ventilate the roomcompletelybeforeusing
the dryer.
10
(1OTtlESDRYERWARRANTY
Full One Year Warranty
For one (1) year from the date of original retail
purchase, any part which fails in normal home
use will be repairedor replacedfree of charge.
Limited Warranty
After the first year from date of original retail
purchase,throughthe time periods listed below,
the parts designatedbelow which fail in normal
home use will be repaired or replaced free of
chargefor the part itself, with the owner paying
all other costs, including labor, mileage and
transportation.
Second Year - All parts,
Third through Fifth Year - Dryer tumbler.
Additional Limited Warranty Against RustThrough
Should an exterior cabinet, including the door,
rust through during the one year period starting
from the date of retail purchase, repair or
replacementwill be made free of charge. After
the first and through the tenth year, repair or
replacementwill be made free of charge for the
part itself, with the owner paying all other costs,
including labor, mileage and transportation.
Please Note: This full warrantyand the limited
warrantyapply when the dryer is located in the
United States or Canada. Dryers located elsewhere are covered by the limited warrantyonly,
including parts which fail during the first two
years.
Canadian Residents
This warrantycoversonly those dryers installed
in Canada that have been listed with the
Canadian Standards Association unless the
dryers are brought into Canada due to transfer
of residencefrom the United Statesto Canada.
The specific warranties expressed above are
the ONLYwarrantiesprovided by the manufacturer. This warranty gives you specific legal
rights, and you may also have other rights that
vary from state to state.
TORECEIVE
WARRANTY
SERVICE
To locatean authorizedservicecompanyin your area contactthe Maytagdealer from whomyour appliancewas purchased;or call MaytagAppliancesSales
Company,Maytag Customer Assistance at the number listed below. Should
you not receive satisfactorywarrantyservice, please call or write:
MaytagAppliancesSales Company
Attn: CAIR’“’Center
PO. Box 2370
Cleveland,TN 37320-2370
US. l-800-688-9900
Canada l-800-688-2002
U.S.customers using TTY for deaf, hearing impaired or
speech impaired, call l-800-688-2080.
When contacting Maytag Appliances Sales Company, Maytag Customer
Assistanceabout a service problem,please include the following:
a. Yourname,addressand telephone number;
b. Model number and serial number (found on the lower center of the
door opening)of your appliance;
c. Name and address of your dealer and the date the appliance was
purchased;
d. A clear descriptionof the problemyou are having.
e. Proofof purchase.
WtiAT
ISNOT
COVERED
BYTHESE
WARRANTIES:
1. Conditionsand damagesresultingfrom any of the following:
a. Improperinstallation,delivery,or maintenance.
b. Any repair, modification,alterationor adjustmentnot authorizedby the
manufactureror an authorizedservicer,
c. Misuse,abuse, accidents,or unreasonableuse.
d. Incorrectelectric current, voltage or supply.
e. Impropersetting of any control.
Warrantiesare void if the original serial numbershave been removed,
altered, or cannot be readily determined.
Light bulb.
Productspurchasedfor commercialor industrial use.
The cost of service or service call to:
a. Correct installationerrors.
b. Instructthe user on proper use of the product,
c. Transportthe applianceto the servicer.
6. Consequentialor incidentaldamagessustainedby any person as a result
of any breach of these warranties,
Some states do not allow the exclusionor limitationof consequentialor incidental damages,so the above exclusion may not apply.
Users Guides,service manualsand parts catalogsare availablefrom
MaytagAppliancesSales Company,MaytagCustomerAssistance.
11
MAYTAG
l
403 W. 4”’ Street N.
l
P.O. Box 39
l
Newton, Iowa 50208